The percpu section is currently linked at absolute address 0, because
older compilers hard-coded the stack protector canary value at a fixed
offset from the start of the GS segment. Now that the canary is a
normal percpu variable, the percpu section does not need to be linked
at a specific address.
x86-64 will now calculate the percpu offsets as the delta between the
initial percpu address and the dynamically allocated memory, like other
architectures. Note that GSBASE is limited to the canonical address
width (48 or 57 bits, sign-extended). As long as the kernel text,
modules, and the dynamically allocated percpu memory are all in the
negative address space, the delta will not overflow this limit.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250123190747.745588-9-brgerst@gmail.com
static inline unsigned long cpu_kernelmode_gs_base(int cpu)
{
- return (unsigned long)per_cpu(fixed_percpu_data.gs_base, cpu);
+#ifdef CONFIG_SMP
+ return per_cpu_offset(cpu);
+#else
+ return 0;
+#endif
}
extern asmlinkage void entry_SYSCALL32_ignore(void);
/* Set up the stack for verify_cpu() */
leaq __top_init_kernel_stack(%rip), %rsp
- /* Setup GSBASE to allow stack canary access for C code */
+ /*
+ * Set up GSBASE.
+ * Note that on SMP the boot CPU uses the init data section until
+ * the per-CPU areas are set up.
+ */
movl $MSR_GS_BASE, %ecx
- leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
- movl %edx, %eax
- shrq $32, %rdx
+ xorl %eax, %eax
+ xorl %edx, %edx
wrmsr
call startup_64_setup_gdt_idt
movl %eax,%fs
movl %eax,%gs
- /* Set up %gs.
- *
- * The base of %gs always points to fixed_percpu_data.
+ /*
+ * Set up GSBASE.
* Note that, on SMP, the boot cpu uses init data section until
* the per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
-#ifndef CONFIG_SMP
- leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
-#endif
movl %edx, %eax
shrq $32, %rdx
wrmsr
#include <asm/cpumask.h>
#include <asm/cpu.h>
-#ifdef CONFIG_X86_64
-#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
-#else
-#define BOOT_PERCPU_OFFSET 0
-#endif
-
-DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
+DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init = {
- [0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
-};
+unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init;
EXPORT_SYMBOL(__per_cpu_offset);
/*
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(6); /* RW_ */
-#ifdef CONFIG_X86_64
-#ifdef CONFIG_SMP
- percpu PT_LOAD FLAGS(6); /* RW_ */
-#endif
- init PT_LOAD FLAGS(7); /* RWE */
-#endif
note PT_NOTE FLAGS(0); /* ___ */
}
__init_begin = .; /* paired with __init_end */
}
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - .init.text - should
- * start another segment - init.
- */
- PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
- ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
- "per-CPU data too large - increase CONFIG_PHYSICAL_START")
-#endif
-
INIT_TEXT_SECTION(PAGE_SIZE)
-#ifdef CONFIG_X86_64
- :init
-#endif
/*
* Section for code used exclusively before alternatives are run. All
EXIT_DATA
}
-#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU_SECTION(INTERNODE_CACHE_BYTES)
-#endif
RUNTIME_CONST_VARIABLES
RUNTIME_CONST(ptr, USER_PTR_MAX)
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
-#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x)
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(fixed_percpu_data);
INIT_PER_CPU(irq_stack_backing_store);
-#ifdef CONFIG_SMP
-. = ASSERT((fixed_percpu_data == 0),
- "fixed_percpu_data is not at start of per-cpu area");
-#endif
-
#ifdef CONFIG_MITIGATION_UNRET_ENTRY
. = ASSERT((retbleed_return_thunk & 0x3f) == 0, "retbleed_return_thunk not cacheline-aligned");
#endif
* the per-CPU areas are set up.
*/
movl $MSR_GS_BASE,%ecx
- leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
- movq %edx, %eax
- shrq $32, %rdx
+ xorl %eax, %eax
+ xorl %edx, %edx
wrmsr
/* Call xen_prepare_pvh() via the kernel virtual mapping */
*/
static int is_percpu_sym(ElfW(Sym) *sym, const char *symname)
{
- int shndx = sym_index(sym);
-
- return (shndx == per_cpu_shndx) &&
- strcmp(symname, "__init_begin") &&
- strcmp(symname, "__per_cpu_load") &&
- strncmp(symname, "init_per_cpu_", 13);
+ return 0;
}
static void sort_relocs(struct relocs *r)
{
- qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
+ if (r->count)
+ qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
}
static int write32(uint32_t v, FILE *f)
leaq __top_init_kernel_stack(%rip), %rsp
- /* Set up %gs.
- *
- * The base of %gs always points to fixed_percpu_data.
+ /*
+ * Set up GSBASE.
* Note that, on SMP, the boot cpu uses init data section until
* the per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
- movq $INIT_PER_CPU_VAR(fixed_percpu_data),%rax
- cdq
+ xorl %eax, %eax
+ xorl %edx, %edx
wrmsr
mov %rsi, %rdi
config KALLSYMS_ABSOLUTE_PERCPU
bool
depends on KALLSYMS
- default X86_64 && SMP
+ default n
# end of the "standard kernel features (expert users)" menu
projects / linux-block.git / commitdiff