[POWERPC] pasemi: Move electra-ide to pata_of_platform
authorOlof Johansson <olof@lixom.net>
Tue, 4 Dec 2007 20:44:32 +0000 (14:44 -0600)
committerOlof Johansson <olof@lixom.net>
Tue, 15 Jan 2008 16:26:45 +0000 (10:26 -0600)
Move electra-ide glue over to the new pata_of_platform framework, and
add the quirks needed to that driver.

Signed-off-by: Olof Johansson <olof@lixom.net>
arch/powerpc/configs/pasemi_defconfig
arch/powerpc/platforms/pasemi/Kconfig
arch/powerpc/platforms/pasemi/Makefile
arch/powerpc/platforms/pasemi/electra_ide.c [deleted file]
drivers/ata/pata_of_platform.c

index 9d21b083ae12afb319fadcaeda06358877e760ed..797f0dfebde242dbe3ba7954996da8a5cac8764e 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24-rc6
-# Fri Dec 28 11:01:53 2007
+# Tue Jan 15 10:26:10 2008
 #
 CONFIG_PPC64=y
 
@@ -152,7 +152,6 @@ CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_ELECTRA_IDE=y
 # CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
@@ -663,6 +662,7 @@ CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
index b3458a181a150cb93277b5cf09e85cfd13722e76..348e0619e3e53cd085e37c820b9732fde2e7ab94 100644 (file)
@@ -37,13 +37,4 @@ config PPC_PASEMI_MDIO
        help
          Driver for MDIO via GPIO on PWRficient platforms
 
-config ELECTRA_IDE
-      tristate "Electra IDE driver"
-      default y
-      depends on PPC_PASEMI && ATA
-      select PATA_PLATFORM
-      help
-       This includes driver support for the Electra on-board IDE
-       interface.
-
 endmenu
index f47fcac7e5812d6270f388bf0f893cbe177b4ca8..2cd2a4f26a48cfd29c2ab32f44e23fb28b836902 100644 (file)
@@ -1,4 +1,3 @@
 obj-y  += setup.o pci.o time.o idle.o powersave.o iommu.o
 obj-$(CONFIG_PPC_PASEMI_MDIO)  += gpio_mdio.o
-obj-$(CONFIG_ELECTRA_IDE) += electra_ide.o
 obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
diff --git a/arch/powerpc/platforms/pasemi/electra_ide.c b/arch/powerpc/platforms/pasemi/electra_ide.c
deleted file mode 100644 (file)
index 12fb0c9..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2007 PA Semi, Inc
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/prom.h>
-#include <asm/system.h>
-
-/* The electra IDE interface is incredibly simple: Just a device on the localbus
- * with interrupts hooked up to one of the GPIOs. The device tree contains the
- * address window and interrupt mappings already, and the pata_platform driver handles
- * the rest. We just need to hook the two up.
- */
-
-#define MAX_IFS        4       /* really, we have only one */
-
-static struct platform_device *pdevs[MAX_IFS];
-
-static int __devinit electra_ide_init(void)
-{
-       struct device_node *np;
-       struct resource r[3];
-       int ret = 0;
-       int i;
-
-       np = of_find_compatible_node(NULL, "ide", "electra-ide");
-       i = 0;
-
-       while (np && i < MAX_IFS) {
-               memset(r, 0, sizeof(r));
-
-               /* pata_platform wants two address ranges: one for the base registers,
-                * another for the control (altstatus). It's located at offset 0x3f6 in
-                * the window, but the device tree only has one large register window
-                * that covers both ranges. So we need to split it up by hand here:
-                */
-
-               ret = of_address_to_resource(np, 0, &r[0]);
-               if (ret)
-                       goto out;
-               ret = of_address_to_resource(np, 0, &r[1]);
-               if (ret)
-                       goto out;
-
-               r[1].start += 0x3f6;
-               r[0].end = r[1].start-1;
-
-               r[2].start = irq_of_parse_and_map(np, 0);
-               r[2].end = irq_of_parse_and_map(np, 0);
-               r[2].flags = IORESOURCE_IRQ;
-
-               pr_debug("registering platform device at 0x%lx/0x%lx, irq is %ld\n",
-                        r[0].start, r[1].start, r[2].start);
-               pdevs[i] = platform_device_register_simple("pata_platform", i, r, 3);
-               if (IS_ERR(pdevs[i])) {
-                       ret = PTR_ERR(pdevs[i]);
-                       pdevs[i] = NULL;
-                       goto out;
-               }
-               np = of_find_compatible_node(np, "ide", "electra-ide");
-       }
-out:
-       return ret;
-}
-module_init(electra_ide_init);
-
-static void __devexit electra_ide_exit(void)
-{
-       int i;
-
-       for (i = 0; i < MAX_IFS; i++)
-               if (pdevs[i])
-                       platform_device_unregister(pdevs[i]);
-}
-module_exit(electra_ide_exit);
-
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
-MODULE_DESCRIPTION("PA Semi Electra IDE driver");
index b7bc4e4a0a26c79eb495f46d2bbe9791b56f9e04..938f48a807ebf5369d089b12300b3b7d1644a7ed 100644 (file)
@@ -34,11 +34,20 @@ static int __devinit pata_of_platform_probe(struct of_device *ofdev,
                return -EINVAL;
        }
 
-       ret = of_address_to_resource(dn, 1, &ctl_res);
-       if (ret) {
-               dev_err(&ofdev->dev, "can't get CTL address from "
-                       "device tree\n");
-               return -EINVAL;
+       if (of_device_is_compatible(dn, "electra-ide")) {
+               /* Altstatus is really at offset 0x3f6 from the primary window
+                * on electra-ide. Adjust ctl_res and io_res accordingly.
+                */
+               ctl_res = io_res;
+               ctl_res.start = ctl_res.start+0x3f6;
+               io_res.end = ctl_res.start-1;
+       } else {
+               ret = of_address_to_resource(dn, 1, &ctl_res);
+               if (ret) {
+                       dev_err(&ofdev->dev, "can't get CTL address from "
+                               "device tree\n");
+                       return -EINVAL;
+               }
        }
 
        ret = of_irq_to_resource(dn, 0, &irq_res);
@@ -76,6 +85,7 @@ static int __devexit pata_of_platform_remove(struct of_device *ofdev)
 
 static struct of_device_id pata_of_platform_match[] = {
        { .compatible = "ata-generic", },
+       { .compatible = "electra-ide", },
        {},
 };
 MODULE_DEVICE_TABLE(of, pata_of_platform_match);