static inline void
vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
+ struct mm_struct *mm = vma->vm_mm;
+
+ if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
vma->vm_flags);
}
static inline void
vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
+ struct mm_struct *mm = vma->vm_mm;
+
+ if (!mm || cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
unsigned long addr = user_addr & PAGE_MASK;
__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
}
*/
#ifndef _ASM_MUTEX_H
#define _ASM_MUTEX_H
-
-#if __LINUX_ARM_ARCH__ < 6
-/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
-# include <asm-generic/mutex-xchg.h>
-#else
-
/*
- * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
- * atomic decrement (it is not a reliable atomic decrement but it satisfies
- * the defined semantics for our purpose, while being smaller and faster
- * than a real atomic decrement or atomic swap. The idea is to attempt
- * decrementing the lock value only once. If once decremented it isn't zero,
- * or if its store-back fails due to a dispute on the exclusive store, we
- * simply bail out immediately through the slow path where the lock will be
- * reattempted until it succeeds.
+ * On pre-ARMv6 hardware this results in a swp-based implementation,
+ * which is the most efficient. For ARMv6+, we emit a pair of exclusive
+ * accesses instead.
*/
-static inline void
-__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
- int __ex_flag, __res;
-
- __asm__ (
-
- "ldrex %0, [%2] \n\t"
- "sub %0, %0, #1 \n\t"
- "strex %1, %0, [%2] "
-
- : "=&r" (__res), "=&r" (__ex_flag)
- : "r" (&(count)->counter)
- : "cc","memory" );
-
- __res |= __ex_flag;
- if (unlikely(__res != 0))
- fail_fn(count);
-}
-
-static inline int
-__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
- int __ex_flag, __res;
-
- __asm__ (
-
- "ldrex %0, [%2] \n\t"
- "sub %0, %0, #1 \n\t"
- "strex %1, %0, [%2] "
-
- : "=&r" (__res), "=&r" (__ex_flag)
- : "r" (&(count)->counter)
- : "cc","memory" );
-
- __res |= __ex_flag;
- if (unlikely(__res != 0))
- __res = fail_fn(count);
- return __res;
-}
-
-/*
- * Same trick is used for the unlock fast path. However the original value,
- * rather than the result, is used to test for success in order to have
- * better generated assembly.
- */
-static inline void
-__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
-{
- int __ex_flag, __res, __orig;
-
- __asm__ (
-
- "ldrex %0, [%3] \n\t"
- "add %1, %0, #1 \n\t"
- "strex %2, %1, [%3] "
-
- : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
- : "r" (&(count)->counter)
- : "cc","memory" );
-
- __orig |= __ex_flag;
- if (unlikely(__orig != 0))
- fail_fn(count);
-}
-
-/*
- * If the unlock was done on a contended lock, or if the unlock simply fails
- * then the mutex remains locked.
- */
-#define __mutex_slowpath_needs_to_unlock() 1
-
-/*
- * For __mutex_fastpath_trylock we use another construct which could be
- * described as a "single value cmpxchg".
- *
- * This provides the needed trylock semantics like cmpxchg would, but it is
- * lighter and less generic than a true cmpxchg implementation.
- */
-static inline int
-__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
-{
- int __ex_flag, __res, __orig;
-
- __asm__ (
-
- "1: ldrex %0, [%3] \n\t"
- "subs %1, %0, #1 \n\t"
- "strexeq %2, %1, [%3] \n\t"
- "movlt %0, #0 \n\t"
- "cmpeq %2, #0 \n\t"
- "bgt 1b "
-
- : "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
- : "r" (&count->counter)
- : "cc", "memory" );
-
- return __orig;
-}
-
-#endif
+#include <asm-generic/mutex-xchg.h>
#endif
struct membank {
phys_addr_t start;
- unsigned long size;
+ phys_addr_t size;
unsigned int highmem;
};
#define bank_phys_end(bank) ((bank)->start + (bank)->size)
#define bank_phys_size(bank) (bank)->size
-extern int arm_add_memory(phys_addr_t start, unsigned long size);
+extern int arm_add_memory(phys_addr_t start, phys_addr_t size);
extern void early_print(const char *str, ...);
extern void dump_machine_table(void);
b 1b
#endif
+__und_fault:
+ @ Correct the PC such that it is pointing at the instruction
+ @ which caused the fault. If the faulting instruction was ARM
+ @ the PC will be pointing at the next instruction, and have to
+ @ subtract 4. Otherwise, it is Thumb, and the PC will be
+ @ pointing at the second half of the Thumb instruction. We
+ @ have to subtract 2.
+ ldr r2, [r0, #S_PC]
+ sub r2, r2, r1
+ str r2, [r0, #S_PC]
+ b do_undefinstr
+ENDPROC(__und_fault)
+
.align 5
__und_svc:
#ifdef CONFIG_KPROBES
@
@ r0 - instruction
@
-#ifndef CONFIG_THUMB2_KERNEL
+#ifndef CONFIG_THUMB2_KERNEL
ldr r0, [r4, #-4]
#else
+ mov r1, #2
ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2
cmp r0, #0xe800 @ 32-bit instruction if xx >= 0
- ldrhhs r9, [r4] @ bottom 16 bits
- orrhs r0, r9, r0, lsl #16
+ blo __und_svc_fault
+ ldrh r9, [r4] @ bottom 16 bits
+ add r4, r4, #2
+ str r4, [sp, #S_PC]
+ orr r0, r9, r0, lsl #16
#endif
- adr r9, BSYM(1f)
+ adr r9, BSYM(__und_svc_finish)
mov r2, r4
bl call_fpe
+ mov r1, #4 @ PC correction to apply
+__und_svc_fault:
mov r0, sp @ struct pt_regs *regs
- bl do_undefinstr
+ bl __und_fault
@
@ IRQs off again before pulling preserved data off the stack
@
-1: disable_irq_notrace
+__und_svc_finish:
+ disable_irq_notrace
@
@ restore SPSR and restart the instruction
mov r2, r4
mov r3, r5
+ @ r2 = regs->ARM_pc, which is either 2 or 4 bytes ahead of the
+ @ faulting instruction depending on Thumb mode.
+ @ r3 = regs->ARM_cpsr
@
- @ fall through to the emulation code, which returns using r9 if
- @ it has emulated the instruction, or the more conventional lr
- @ if we are to treat this as a real undefined instruction
- @
- @ r0 - instruction
+ @ The emulation code returns using r9 if it has emulated the
+ @ instruction, or the more conventional lr if we are to treat
+ @ this as a real undefined instruction
@
adr r9, BSYM(ret_from_exception)
- adr lr, BSYM(__und_usr_unknown)
+
tst r3, #PSR_T_BIT @ Thumb mode?
- itet eq @ explicit IT needed for the 1f label
- subeq r4, r2, #4 @ ARM instr at LR - 4
- subne r4, r2, #2 @ Thumb instr at LR - 2
-1: ldreqt r0, [r4]
+ bne __und_usr_thumb
+ sub r4, r2, #4 @ ARM instr at LR - 4
+1: ldrt r0, [r4]
#ifdef CONFIG_CPU_ENDIAN_BE8
- reveq r0, r0 @ little endian instruction
+ rev r0, r0 @ little endian instruction
#endif
- beq call_fpe
+ @ r0 = 32-bit ARM instruction which caused the exception
+ @ r2 = PC value for the following instruction (:= regs->ARM_pc)
+ @ r4 = PC value for the faulting instruction
+ @ lr = 32-bit undefined instruction function
+ adr lr, BSYM(__und_usr_fault_32)
+ b call_fpe
+
+__und_usr_thumb:
@ Thumb instruction
+ sub r4, r2, #2 @ First half of thumb instr at LR - 2
#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
/*
* Thumb-2 instruction handling. Note that because pre-v6 and >= v6 platforms
ldr r5, .LCcpu_architecture
ldr r5, [r5]
cmp r5, #CPU_ARCH_ARMv7
- blo __und_usr_unknown
+ blo __und_usr_fault_16 @ 16bit undefined instruction
/*
* The following code won't get run unless the running CPU really is v7, so
* coding round the lack of ldrht on older arches is pointless. Temporarily
*/
.arch armv6t2
#endif
-2:
- ARM( ldrht r5, [r4], #2 )
- THUMB( ldrht r5, [r4] )
- THUMB( add r4, r4, #2 )
+2: ldrht r5, [r4]
cmp r5, #0xe800 @ 32bit instruction if xx != 0
- blo __und_usr_unknown
-3: ldrht r0, [r4]
+ blo __und_usr_fault_16 @ 16bit undefined instruction
+3: ldrht r0, [r2]
add r2, r2, #2 @ r2 is PC + 2, make it PC + 4
+ str r2, [sp, #S_PC] @ it's a 2x16bit instr, update
orr r0, r0, r5, lsl #16
+ adr lr, BSYM(__und_usr_fault_32)
+ @ r0 = the two 16-bit Thumb instructions which caused the exception
+ @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc)
+ @ r4 = PC value for the first 16-bit Thumb instruction
+ @ lr = 32bit undefined instruction function
#if __LINUX_ARM_ARCH__ < 7
/* If the target arch was overridden, change it back: */
#endif
#endif /* __LINUX_ARM_ARCH__ < 7 */
#else /* !(CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7) */
- b __und_usr_unknown
+ b __und_usr_fault_16
#endif
- UNWIND(.fnend )
+ UNWIND(.fnend)
ENDPROC(__und_usr)
- @
- @ fallthrough to call_fpe
- @
-
/*
- * The out of line fixup for the ldrt above.
+ * The out of line fixup for the ldrt instructions above.
*/
.pushsection .fixup, "ax"
.align 2
* NEON handler code.
*
* Emulators may wish to make use of the following registers:
- * r0 = instruction opcode.
- * r2 = PC+4
+ * r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
+ * r2 = PC value to resume execution after successful emulation
* r9 = normal "successful" return address
- * r10 = this threads thread_info structure.
+ * r10 = this threads thread_info structure
* lr = unrecognised instruction return address
+ * IRQs disabled, FIQs enabled.
*/
@
@ Fall-through from Thumb-2 __und_usr
mov pc, lr
ENDPROC(no_fp)
-__und_usr_unknown:
- enable_irq
+__und_usr_fault_32:
+ mov r1, #4
+ b 1f
+__und_usr_fault_16:
+ mov r1, #2
+1: enable_irq
mov r0, sp
adr lr, BSYM(ret_from_exception)
- b do_undefinstr
-ENDPROC(__und_usr_unknown)
+ b __und_fault
+ENDPROC(__und_usr_fault_32)
+ENDPROC(__und_usr_fault_16)
.align 5
__pabt_usr:
old = *parent;
*parent = return_hooker;
- err = ftrace_push_return_trace(old, self_addr, &trace.depth,
- frame_pointer);
- if (err == -EBUSY) {
- *parent = old;
- return;
- }
-
trace.func = self_addr;
+ trace.depth = current->curr_ret_stack + 1;
/* Only trace if the calling function expects to */
if (!ftrace_graph_entry(&trace)) {
- current->curr_ret_stack--;
*parent = old;
+ return;
+ }
+
+ err = ftrace_push_return_trace(old, self_addr, &trace.depth,
+ frame_pointer);
+ if (err == -EBUSY) {
+ *parent = old;
+ return;
}
}
void machine_halt(void)
{
machine_shutdown();
+ local_irq_disable();
while (1);
}
/* Whoops - the platform was unable to reboot. Tell the user! */
printk("Reboot failed -- System halted\n");
+ local_irq_disable();
while (1);
}
/* can't use cpu_relax() here as it may require MMU setup */;
}
-int __init arm_add_memory(phys_addr_t start, unsigned long size)
+int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
{
struct membank *bank = &meminfo.bank[meminfo.nr_banks];
}
#endif
- bank->size = size & PAGE_MASK;
+ bank->size = size & ~(phys_addr_t)(PAGE_SIZE - 1);
/*
* Check whether this memory region has non-zero size or
static int __init early_mem(char *p)
{
static int usermem __initdata = 0;
- unsigned long size;
+ phys_addr_t size;
phys_addr_t start;
char *endp;
cpumask_copy(&mask, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &mask);
- smp_cross_call(&mask, IPI_CPU_STOP);
+ if (!cpumask_empty(&mask))
+ smp_cross_call(&mask, IPI_CPU_STOP);
/* Wait up to one second for other CPUs to stop */
timeout = USEC_PER_SEC;
asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
{
- unsigned int correction = thumb_mode(regs) ? 2 : 4;
unsigned int instr;
siginfo_t info;
void __user *pc;
- /*
- * According to the ARM ARM, PC is 2 or 4 bytes ahead,
- * depending whether we're in Thumb mode or not.
- * Correct this offset.
- */
- regs->ARM_pc -= correction;
-
pc = (void __user *)instruction_pointer(regs);
if (processor_mode(regs) == SVC_MODE) {
dsb
mov r0, r0, lsr #PAGE_SHIFT @ align address
mov r1, r1, lsr #PAGE_SHIFT
+#ifdef CONFIG_ARM_ERRATA_720789
+ mov r3, #0
+#else
asid r3, r3 @ mask ASID
+#endif
orr r0, r3, r0, lsl #PAGE_SHIFT @ Create initial MVA
mov r1, r1, lsl #PAGE_SHIFT
1:
+#ifdef CONFIG_ARM_ERRATA_720789
+ ALT_SMP(mcr p15, 0, r0, c8, c3, 3) @ TLB invalidate U MVA all ASID (shareable)
+#else
ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable)
+#endif
ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA
add r0, r0, #PAGE_SZ
mov r0, r0, lsl #PAGE_SHIFT
mov r1, r1, lsl #PAGE_SHIFT
1:
+#ifdef CONFIG_ARM_ERRATA_720789
+ ALT_SMP(mcr p15, 0, r0, c8, c3, 3) @ TLB invalidate U MVA all ASID (shareable)
+#else
ALT_SMP(mcr p15, 0, r0, c8, c3, 1) @ TLB invalidate U MVA (shareable)
+#endif
ALT_UP(mcr p15, 0, r0, c8, c7, 1) @ TLB invalidate U MVA
add r0, r0, #PAGE_SZ
cmp r0, r1
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * Basic entry code, called from the kernel's undefined instruction trap.
- * r0 = faulted instruction
- * r5 = faulted PC+4
- * r9 = successful return
- * r10 = thread_info structure
- * lr = failure return
*/
#include <asm/thread_info.h>
#include <asm/vfpmacros.h>
#include "../kernel/entry-header.S"
+@ VFP entry point.
+@
+@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@ r2 = PC value to resume execution after successful emulation
+@ r9 = normal "successful" return address
+@ r10 = this threads thread_info structure
+@ lr = unrecognised instruction return address
+@ IRQs disabled.
+@
ENTRY(do_vfp)
#ifdef CONFIG_PREEMPT
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
@ VFP hardware support entry point.
@
-@ r0 = faulted instruction
-@ r2 = faulted PC+4
-@ r9 = successful return
+@ r0 = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@ r2 = PC value to resume execution after successful emulation
+@ r9 = normal "successful" return address
@ r10 = vfp_state union
@ r11 = CPU number
-@ lr = failure return
-
+@ lr = unrecognised instruction return address
+@ IRQs enabled.
ENTRY(vfp_support_entry)
DBGSTR3 "instr %08x pc %08x state %p", r0, r2, r10
@ exception before retrying branch
@ out before setting an FPEXC that
@ stops us reading stuff
- VFPFMXR FPEXC, r1 @ restore FPEXC last
- sub r2, r2, #4
- str r2, [sp, #S_PC] @ retry the instruction
+ VFPFMXR FPEXC, r1 @ Restore FPEXC last
+ sub r2, r2, #4 @ Retry current instruction - if Thumb
+ str r2, [sp, #S_PC] @ mode it's two 16-bit instructions,
+ @ else it's one 32-bit instruction, so
+ @ always subtract 4 from the following
+ @ instruction address.
#ifdef CONFIG_PREEMPT
get_thread_info r10
ldr r4, [r10, #TI_PREEMPT] @ get preempt count
/* disable, just in case */
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+ } else if (vfp_current_hw_state[ti->cpu]) {
+#ifndef CONFIG_SMP
+ fmxr(FPEXC, fpexc | FPEXC_EN);
+ vfp_save_state(vfp_current_hw_state[ti->cpu], fpexc);
+ fmxr(FPEXC, fpexc);
+#endif
}
/* clear any information we had about last context state */
- memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state));
+ vfp_current_hw_state[ti->cpu] = NULL;
return 0;
}
projects / linux-2.6-block.git / commitdiff