ASoC: rt5670: change dapm routes of PLL connection
authorBard Liao <bardliao@realtek.com>
Thu, 6 Nov 2014 04:23:54 +0000 (12:23 +0800)
committerMark Brown <broonie@kernel.org>
Thu, 6 Nov 2014 06:01:13 +0000 (06:01 +0000)
PLL should be powered up once filter power is on. So, "PLL1"
should be connected to filters instead of DACs.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt5670.c

index 57ab19dbaaf33ddf10e526e7689309ddc919f472..9bd8b4f633032c713a432ca3af1bc38aa3c81f16 100644 (file)
@@ -1877,6 +1877,10 @@ static const struct snd_soc_dapm_route rt5670_dapm_routes[] = {
        { "DAC1 MIXR", "DAC1 Switch", "DAC1 R Mux" },
        { "DAC1 MIXR", NULL, "DAC Stereo1 Filter" },
 
+       { "DAC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll },
+       { "DAC Mono Left Filter", NULL, "PLL1", is_sys_clk_from_pll },
+       { "DAC Mono Right Filter", NULL, "PLL1", is_sys_clk_from_pll },
+
        { "DAC MIX", NULL, "DAC1 MIXL" },
        { "DAC MIX", NULL, "DAC1 MIXR" },
 
@@ -1926,14 +1930,10 @@ static const struct snd_soc_dapm_route rt5670_dapm_routes[] = {
 
        { "DAC L1", NULL, "DAC L1 Power" },
        { "DAC L1", NULL, "Stereo DAC MIXL" },
-       { "DAC L1", NULL, "PLL1", is_sys_clk_from_pll },
        { "DAC R1", NULL, "DAC R1 Power" },
        { "DAC R1", NULL, "Stereo DAC MIXR" },
-       { "DAC R1", NULL, "PLL1", is_sys_clk_from_pll },
        { "DAC L2", NULL, "Mono DAC MIXL" },
-       { "DAC L2", NULL, "PLL1", is_sys_clk_from_pll },
        { "DAC R2", NULL, "Mono DAC MIXR" },
-       { "DAC R2", NULL, "PLL1", is_sys_clk_from_pll },
 
        { "OUT MIXL", "BST1 Switch", "BST1" },
        { "OUT MIXL", "INL Switch", "INL VOL" },