usb: xhci: fix uninitialized completion when USB3 port got wrong status
authorAaron Ma <aaron.ma@canonical.com>
Fri, 9 Nov 2018 15:21:20 +0000 (17:21 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 9 Nov 2018 16:31:09 +0000 (08:31 -0800)
Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on
Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3,
after clear port reset it works fine.

Since this device is registered on USB3 roothub at boot,
when port status reports not superspeed, xhci_get_port_status will call
an uninitialized completion in bus_state[0].
Kernel will hang because of NULL pointer.

Restrict the USB2 resume status check in USB2 roothub to fix hang issue.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/xhci-hub.c
drivers/usb/host/xhci-ring.c

index 12eea73d9f20b00701e22da8debdcaa1d9283c92..60e4ac7ae4f8dba56697c41310ad1047c24757a4 100644 (file)
@@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
                        status |= USB_PORT_STAT_SUSPEND;
        }
        if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME &&
-               !DEV_SUPERSPEED_ANY(raw_port_status)) {
+               !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) {
                if ((raw_port_status & PORT_RESET) ||
                                !(raw_port_status & PORT_PE))
                        return 0xffffffff;
index 730a6ecd85fcbd18ea280e8bae384d4a8c5b586f..250b758efe9f650a98d12ff0e6d20416bd377df3 100644 (file)
@@ -1646,7 +1646,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
         * RExit to a disconnect state).  If so, let the the driver know it's
         * out of the RExit state.
         */
-       if (!DEV_SUPERSPEED_ANY(portsc) &&
+       if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
                        test_and_clear_bit(hcd_portnum,
                                &bus_state->rexit_ports)) {
                complete(&bus_state->rexit_done[hcd_portnum]);