--- /dev/null
+ Dynamic DMA mapping Guide
+ =========================
+
+ David S. Miller <davem@redhat.com>
+ Richard Henderson <rth@cygnus.com>
+ Jakub Jelinek <jakub@redhat.com>
+
+This is a guide to device driver writers on how to use the DMA API
+with example pseudo-code. For a concise description of the API, see
+DMA-API.txt.
+
+Most of the 64bit platforms have special hardware that translates bus
+addresses (DMA addresses) into physical addresses. This is similar to
+how page tables and/or a TLB translates virtual addresses to physical
+addresses on a CPU. This is needed so that e.g. PCI devices can
+access with a Single Address Cycle (32bit DMA address) any page in the
+64bit physical address space. Previously in Linux those 64bit
+platforms had to set artificial limits on the maximum RAM size in the
+system, so that the virt_to_bus() static scheme works (the DMA address
+translation tables were simply filled on bootup to map each bus
+address to the physical page __pa(bus_to_virt())).
+
+So that Linux can use the dynamic DMA mapping, it needs some help from the
+drivers, namely it has to take into account that DMA addresses should be
+mapped only for the time they are actually used and unmapped after the DMA
+transfer.
+
+The following API will work of course even on platforms where no such
+hardware exists.
+
+Note that the DMA API works with any bus independent of the underlying
+microprocessor architecture. You should use the DMA API rather than
+the bus specific DMA API (e.g. pci_dma_*).
+
+First of all, you should make sure
+
+#include <linux/dma-mapping.h>
+
+is in your driver. This file will obtain for you the definition of the
+dma_addr_t (which can hold any valid DMA address for the platform)
+type which should be used everywhere you hold a DMA (bus) address
+returned from the DMA mapping functions.
+
+ What memory is DMA'able?
+
+The first piece of information you must know is what kernel memory can
+be used with the DMA mapping facilities. There has been an unwritten
+set of rules regarding this, and this text is an attempt to finally
+write them down.
+
+If you acquired your memory via the page allocator
+(i.e. __get_free_page*()) or the generic memory allocators
+(i.e. kmalloc() or kmem_cache_alloc()) then you may DMA to/from
+that memory using the addresses returned from those routines.
+
+This means specifically that you may _not_ use the memory/addresses
+returned from vmalloc() for DMA. It is possible to DMA to the
+_underlying_ memory mapped into a vmalloc() area, but this requires
+walking page tables to get the physical addresses, and then
+translating each of those pages back to a kernel address using
+something like __va(). [ EDIT: Update this when we integrate
+Gerd Knorr's generic code which does this. ]
+
+This rule also means that you may use neither kernel image addresses
+(items in data/text/bss segments), nor module image addresses, nor
+stack addresses for DMA. These could all be mapped somewhere entirely
+different than the rest of physical memory. Even if those classes of
+memory could physically work with DMA, you'd need to ensure the I/O
+buffers were cacheline-aligned. Without that, you'd see cacheline
+sharing problems (data corruption) on CPUs with DMA-incoherent caches.
+(The CPU could write to one word, DMA would write to a different one
+in the same cache line, and one of them could be overwritten.)
+
+Also, this means that you cannot take the return of a kmap()
+call and DMA to/from that. This is similar to vmalloc().
+
+What about block I/O and networking buffers? The block I/O and
+networking subsystems make sure that the buffers they use are valid
+for you to DMA from/to.
+
+ DMA addressing limitations
+
+Does your device have any DMA addressing limitations? For example, is
+your device only capable of driving the low order 24-bits of address?
+If so, you need to inform the kernel of this fact.
+
+By default, the kernel assumes that your device can address the full
+32-bits. For a 64-bit capable device, this needs to be increased.
+And for a device with limitations, as discussed in the previous
+paragraph, it needs to be decreased.
+
+Special note about PCI: PCI-X specification requires PCI-X devices to
+support 64-bit addressing (DAC) for all transactions. And at least
+one platform (SGI SN2) requires 64-bit consistent allocations to
+operate correctly when the IO bus is in PCI-X mode.
+
+For correct operation, you must interrogate the kernel in your device
+probe routine to see if the DMA controller on the machine can properly
+support the DMA addressing limitation your device has. It is good
+style to do this even if your device holds the default setting,
+because this shows that you did think about these issues wrt. your
+device.
+
+The query is performed via a call to dma_set_mask():
+
+ int dma_set_mask(struct device *dev, u64 mask);
+
+The query for consistent allocations is performed via a call to
+dma_set_coherent_mask():
+
+ int dma_set_coherent_mask(struct device *dev, u64 mask);
+
+Here, dev is a pointer to the device struct of your device, and mask
+is a bit mask describing which bits of an address your device
+supports. It returns zero if your card can perform DMA properly on
+the machine given the address mask you provided. In general, the
+device struct of your device is embedded in the bus specific device
+struct of your device. For example, a pointer to the device struct of
+your PCI device is pdev->dev (pdev is a pointer to the PCI device
+struct of your device).
+
+If it returns non-zero, your device cannot perform DMA properly on
+this platform, and attempting to do so will result in undefined
+behavior. You must either use a different mask, or not use DMA.
+
+This means that in the failure case, you have three options:
+
+1) Use another DMA mask, if possible (see below).
+2) Use some non-DMA mode for data transfer, if possible.
+3) Ignore this device and do not initialize it.
+
+It is recommended that your driver print a kernel KERN_WARNING message
+when you end up performing either #2 or #3. In this manner, if a user
+of your driver reports that performance is bad or that the device is not
+even detected, you can ask them for the kernel messages to find out
+exactly why.
+
+The standard 32-bit addressing device would do something like this:
+
+ if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
+ printk(KERN_WARNING
+ "mydev: No suitable DMA available.\n");
+ goto ignore_this_device;
+ }
+
+Another common scenario is a 64-bit capable device. The approach here
+is to try for 64-bit addressing, but back down to a 32-bit mask that
+should not fail. The kernel may fail the 64-bit mask not because the
+platform is not capable of 64-bit addressing. Rather, it may fail in
+this case simply because 32-bit addressing is done more efficiently
+than 64-bit addressing. For example, Sparc64 PCI SAC addressing is
+more efficient than DAC addressing.
+
+Here is how you would handle a 64-bit capable device which can drive
+all 64-bits when accessing streaming DMA:
+
+ int using_dac;
+
+ if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+ using_dac = 1;
+ } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
+ using_dac = 0;
+ } else {
+ printk(KERN_WARNING
+ "mydev: No suitable DMA available.\n");
+ goto ignore_this_device;
+ }
+
+If a card is capable of using 64-bit consistent allocations as well,
+the case would look like this:
+
+ int using_dac, consistent_using_dac;
+
+ if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
+ using_dac = 1;
+ consistent_using_dac = 1;
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
+ } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
+ using_dac = 0;
+ consistent_using_dac = 0;
+ dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
+ } else {
+ printk(KERN_WARNING
+ "mydev: No suitable DMA available.\n");
+ goto ignore_this_device;
+ }
+
+dma_set_coherent_mask() will always be able to set the same or a
+smaller mask as dma_set_mask(). However for the rare case that a
+device driver only uses consistent allocations, one would have to
+check the return value from dma_set_coherent_mask().
+
+Finally, if your device can only drive the low 24-bits of
+address you might do something like:
+
+ if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
+ printk(KERN_WARNING
+ "mydev: 24-bit DMA addressing not available.\n");
+ goto ignore_this_device;
+ }
+
+When dma_set_mask() is successful, and returns zero, the kernel saves
+away this mask you have provided. The kernel will use this
+information later when you make DMA mappings.
+
+There is a case which we are aware of at this time, which is worth
+mentioning in this documentation. If your device supports multiple
+functions (for example a sound card provides playback and record
+functions) and the various different functions have _different_
+DMA addressing limitations, you may wish to probe each mask and
+only provide the functionality which the machine can handle. It
+is important that the last call to dma_set_mask() be for the
+most specific mask.
+
+Here is pseudo-code showing how this might be done:
+
+ #define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
+ #define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
+
+ struct my_sound_card *card;
+ struct device *dev;
+
+ ...
+ if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
+ card->playback_enabled = 1;
+ } else {
+ card->playback_enabled = 0;
+ printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
+ card->name);
+ }
+ if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
+ card->record_enabled = 1;
+ } else {
+ card->record_enabled = 0;
+ printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
+ card->name);
+ }
+
+A sound card was used as an example here because this genre of PCI
+devices seems to be littered with ISA chips given a PCI front end,
+and thus retaining the 16MB DMA addressing limitations of ISA.
+
+ Types of DMA mappings
+
+There are two types of DMA mappings:
+
+- Consistent DMA mappings which are usually mapped at driver
+ initialization, unmapped at the end and for which the hardware should
+ guarantee that the device and the CPU can access the data
+ in parallel and will see updates made by each other without any
+ explicit software flushing.
+
+ Think of "consistent" as "synchronous" or "coherent".
+
+ The current default is to return consistent memory in the low 32
+ bits of the bus space. However, for future compatibility you should
+ set the consistent mask even if this default is fine for your
+ driver.
+
+ Good examples of what to use consistent mappings for are:
+
+ - Network card DMA ring descriptors.
+ - SCSI adapter mailbox command data structures.
+ - Device firmware microcode executed out of
+ main memory.
+
+ The invariant these examples all require is that any CPU store
+ to memory is immediately visible to the device, and vice
+ versa. Consistent mappings guarantee this.
+
+ IMPORTANT: Consistent DMA memory does not preclude the usage of
+ proper memory barriers. The CPU may reorder stores to
+ consistent memory just as it may normal memory. Example:
+ if it is important for the device to see the first word
+ of a descriptor updated before the second, you must do
+ something like:
+
+ desc->word0 = address;
+ wmb();
+ desc->word1 = DESC_VALID;
+
+ in order to get correct behavior on all platforms.
+
+ Also, on some platforms your driver may need to flush CPU write
+ buffers in much the same way as it needs to flush write buffers
+ found in PCI bridges (such as by reading a register's value
+ after writing it).
+
+- Streaming DMA mappings which are usually mapped for one DMA
+ transfer, unmapped right after it (unless you use dma_sync_* below)
+ and for which hardware can optimize for sequential accesses.
+
+ This of "streaming" as "asynchronous" or "outside the coherency
+ domain".
+
+ Good examples of what to use streaming mappings for are:
+
+ - Networking buffers transmitted/received by a device.
+ - Filesystem buffers written/read by a SCSI device.
+
+ The interfaces for using this type of mapping were designed in
+ such a way that an implementation can make whatever performance
+ optimizations the hardware allows. To this end, when using
+ such mappings you must be explicit about what you want to happen.
+
+Neither type of DMA mapping has alignment restrictions that come from
+the underlying bus, although some devices may have such restrictions.
+Also, systems with caches that aren't DMA-coherent will work better
+when the underlying buffers don't share cache lines with other data.
+
+
+ Using Consistent DMA mappings.
+
+To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
+you should do:
+
+ dma_addr_t dma_handle;
+
+ cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
+
+where device is a struct device *. This may be called in interrupt
+context with the GFP_ATOMIC flag.
+
+Size is the length of the region you want to allocate, in bytes.
+
+This routine will allocate RAM for that region, so it acts similarly to
+__get_free_pages (but takes size instead of a page order). If your
+driver needs regions sized smaller than a page, you may prefer using
+the dma_pool interface, described below.
+
+The consistent DMA mapping interfaces, for non-NULL dev, will by
+default return a DMA address which is 32-bit addressable. Even if the
+device indicates (via DMA mask) that it may address the upper 32-bits,
+consistent allocation will only return > 32-bit addresses for DMA if
+the consistent DMA mask has been explicitly changed via
+dma_set_coherent_mask(). This is true of the dma_pool interface as
+well.
+
+dma_alloc_coherent returns two values: the virtual address which you
+can use to access it from the CPU and dma_handle which you pass to the
+card.
+
+The cpu return address and the DMA bus master address are both
+guaranteed to be aligned to the smallest PAGE_SIZE order which
+is greater than or equal to the requested size. This invariant
+exists (for example) to guarantee that if you allocate a chunk
+which is smaller than or equal to 64 kilobytes, the extent of the
+buffer you receive will not cross a 64K boundary.
+
+To unmap and free such a DMA region, you call:
+
+ dma_free_coherent(dev, size, cpu_addr, dma_handle);
+
+where dev, size are the same as in the above call and cpu_addr and
+dma_handle are the values dma_alloc_coherent returned to you.
+This function may not be called in interrupt context.
+
+If your driver needs lots of smaller memory regions, you can write
+custom code to subdivide pages returned by dma_alloc_coherent,
+or you can use the dma_pool API to do that. A dma_pool is like
+a kmem_cache, but it uses dma_alloc_coherent not __get_free_pages.
+Also, it understands common hardware constraints for alignment,
+like queue heads needing to be aligned on N byte boundaries.
+
+Create a dma_pool like this:
+
+ struct dma_pool *pool;
+
+ pool = dma_pool_create(name, dev, size, align, alloc);
+
+The "name" is for diagnostics (like a kmem_cache name); dev and size
+are as above. The device's hardware alignment requirement for this
+type of data is "align" (which is expressed in bytes, and must be a
+power of two). If your device has no boundary crossing restrictions,
+pass 0 for alloc; passing 4096 says memory allocated from this pool
+must not cross 4KByte boundaries (but at that time it may be better to
+go for dma_alloc_coherent directly instead).
+
+Allocate memory from a dma pool like this:
+
+ cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
+
+flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
+holding SMP locks), SLAB_ATOMIC otherwise. Like dma_alloc_coherent,
+this returns two values, cpu_addr and dma_handle.
+
+Free memory that was allocated from a dma_pool like this:
+
+ dma_pool_free(pool, cpu_addr, dma_handle);
+
+where pool is what you passed to dma_pool_alloc, and cpu_addr and
+dma_handle are the values dma_pool_alloc returned. This function
+may be called in interrupt context.
+
+Destroy a dma_pool by calling:
+
+ dma_pool_destroy(pool);
+
+Make sure you've called dma_pool_free for all memory allocated
+from a pool before you destroy the pool. This function may not
+be called in interrupt context.
+
+ DMA Direction
+
+The interfaces described in subsequent portions of this document
+take a DMA direction argument, which is an integer and takes on
+one of the following values:
+
+ DMA_BIDIRECTIONAL
+ DMA_TO_DEVICE
+ DMA_FROM_DEVICE
+ DMA_NONE
+
+One should provide the exact DMA direction if you know it.
+
+DMA_TO_DEVICE means "from main memory to the device"
+DMA_FROM_DEVICE means "from the device to main memory"
+It is the direction in which the data moves during the DMA
+transfer.
+
+You are _strongly_ encouraged to specify this as precisely
+as you possibly can.
+
+If you absolutely cannot know the direction of the DMA transfer,
+specify DMA_BIDIRECTIONAL. It means that the DMA can go in
+either direction. The platform guarantees that you may legally
+specify this, and that it will work, but this may be at the
+cost of performance for example.
+
+The value DMA_NONE is to be used for debugging. One can
+hold this in a data structure before you come to know the
+precise direction, and this will help catch cases where your
+direction tracking logic has failed to set things up properly.
+
+Another advantage of specifying this value precisely (outside of
+potential platform-specific optimizations of such) is for debugging.
+Some platforms actually have a write permission boolean which DMA
+mappings can be marked with, much like page protections in the user
+program address space. Such platforms can and do report errors in the
+kernel logs when the DMA controller hardware detects violation of the
+permission setting.
+
+Only streaming mappings specify a direction, consistent mappings
+implicitly have a direction attribute setting of
+DMA_BIDIRECTIONAL.
+
+The SCSI subsystem tells you the direction to use in the
+'sc_data_direction' member of the SCSI command your driver is
+working on.
+
+For Networking drivers, it's a rather simple affair. For transmit
+packets, map/unmap them with the DMA_TO_DEVICE direction
+specifier. For receive packets, just the opposite, map/unmap them
+with the DMA_FROM_DEVICE direction specifier.
+
+ Using Streaming DMA mappings
+
+The streaming DMA mapping routines can be called from interrupt
+context. There are two versions of each map/unmap, one which will
+map/unmap a single memory region, and one which will map/unmap a
+scatterlist.
+
+To map a single region, you do:
+
+ struct device *dev = &my_dev->dev;
+ dma_addr_t dma_handle;
+ void *addr = buffer->ptr;
+ size_t size = buffer->len;
+
+ dma_handle = dma_map_single(dev, addr, size, direction);
+
+and to unmap it:
+
+ dma_unmap_single(dev, dma_handle, size, direction);
+
+You should call dma_unmap_single when the DMA activity is finished, e.g.
+from the interrupt which told you that the DMA transfer is done.
+
+Using cpu pointers like this for single mappings has a disadvantage,
+you cannot reference HIGHMEM memory in this way. Thus, there is a
+map/unmap interface pair akin to dma_{map,unmap}_single. These
+interfaces deal with page/offset pairs instead of cpu pointers.
+Specifically:
+
+ struct device *dev = &my_dev->dev;
+ dma_addr_t dma_handle;
+ struct page *page = buffer->page;
+ unsigned long offset = buffer->offset;
+ size_t size = buffer->len;
+
+ dma_handle = dma_map_page(dev, page, offset, size, direction);
+
+ ...
+
+ dma_unmap_page(dev, dma_handle, size, direction);
+
+Here, "offset" means byte offset within the given page.
+
+With scatterlists, you map a region gathered from several regions by:
+
+ int i, count = dma_map_sg(dev, sglist, nents, direction);
+ struct scatterlist *sg;
+
+ for_each_sg(sglist, sg, count, i) {
+ hw_address[i] = sg_dma_address(sg);
+ hw_len[i] = sg_dma_len(sg);
+ }
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. if DMA mapping is done with PAGE_SIZE granularity, any
+consecutive sglist entries can be merged into one provided the first one
+ends and the second one starts on a page boundary - in fact this is a huge
+advantage for cards which either cannot do scatter-gather or have very
+limited number of scatter-gather entries) and returns the actual number
+of sg entries it mapped them to. On failure 0 is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+To unmap a scatterlist, just call:
+
+ dma_unmap_sg(dev, sglist, nents, direction);
+
+Again, make sure DMA activity has already finished.
+
+PLEASE NOTE: The 'nents' argument to the dma_unmap_sg call must be
+ the _same_ one you passed into the dma_map_sg call,
+ it should _NOT_ be the 'count' value _returned_ from the
+ dma_map_sg call.
+
+Every dma_map_{single,sg} call should have its dma_unmap_{single,sg}
+counterpart, because the bus address space is a shared resource (although
+in some ports the mapping is per each BUS so less devices contend for the
+same bus address space) and you could render the machine unusable by eating
+all bus addresses.
+
+If you need to use the same streaming DMA region multiple times and touch
+the data in between the DMA transfers, the buffer needs to be synced
+properly in order for the cpu and device to see the most uptodate and
+correct copy of the DMA buffer.
+
+So, firstly, just map it with dma_map_{single,sg}, and after each DMA
+transfer call either:
+
+ dma_sync_single_for_cpu(dev, dma_handle, size, direction);
+
+or:
+
+ dma_sync_sg_for_cpu(dev, sglist, nents, direction);
+
+as appropriate.
+
+Then, if you wish to let the device get at the DMA area again,
+finish accessing the data with the cpu, and then before actually
+giving the buffer to the hardware call either:
+
+ dma_sync_single_for_device(dev, dma_handle, size, direction);
+
+or:
+
+ dma_sync_sg_for_device(dev, sglist, nents, direction);
+
+as appropriate.
+
+After the last DMA transfer call one of the DMA unmap routines
+dma_unmap_{single,sg}. If you don't touch the data from the first dma_map_*
+call till dma_unmap_*, then you don't have to call the dma_sync_*
+routines at all.
+
+Here is pseudo code which shows a situation in which you would need
+to use the dma_sync_*() interfaces.
+
+ my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
+ {
+ dma_addr_t mapping;
+
+ mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
+
+ cp->rx_buf = buffer;
+ cp->rx_len = len;
+ cp->rx_dma = mapping;
+
+ give_rx_buf_to_card(cp);
+ }
+
+ ...
+
+ my_card_interrupt_handler(int irq, void *devid, struct pt_regs *regs)
+ {
+ struct my_card *cp = devid;
+
+ ...
+ if (read_card_status(cp) == RX_BUF_TRANSFERRED) {
+ struct my_card_header *hp;
+
+ /* Examine the header to see if we wish
+ * to accept the data. But synchronize
+ * the DMA transfer with the CPU first
+ * so that we see updated contents.
+ */
+ dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
+ cp->rx_len,
+ DMA_FROM_DEVICE);
+
+ /* Now it is safe to examine the buffer. */
+ hp = (struct my_card_header *) cp->rx_buf;
+ if (header_is_ok(hp)) {
+ dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
+ DMA_FROM_DEVICE);
+ pass_to_upper_layers(cp->rx_buf);
+ make_and_setup_new_rx_buf(cp);
+ } else {
+ /* Just sync the buffer and give it back
+ * to the card.
+ */
+ dma_sync_single_for_device(&cp->dev,
+ cp->rx_dma,
+ cp->rx_len,
+ DMA_FROM_DEVICE);
+ give_rx_buf_to_card(cp);
+ }
+ }
+ }
+
+Drivers converted fully to this interface should not use virt_to_bus any
+longer, nor should they use bus_to_virt. Some drivers have to be changed a
+little bit, because there is no longer an equivalent to bus_to_virt in the
+dynamic DMA mapping scheme - you have to always store the DMA addresses
+returned by the dma_alloc_coherent, dma_pool_alloc, and dma_map_single
+calls (dma_map_sg stores them in the scatterlist itself if the platform
+supports dynamic DMA mapping in hardware) in your driver structures and/or
+in the card registers.
+
+All drivers should be using these interfaces with no exceptions. It
+is planned to completely remove virt_to_bus() and bus_to_virt() as
+they are entirely deprecated. Some ports already do not provide these
+as it is impossible to correctly support them.
+
+ Optimizing Unmap State Space Consumption
+
+On many platforms, dma_unmap_{single,page}() is simply a nop.
+Therefore, keeping track of the mapping address and length is a waste
+of space. Instead of filling your drivers up with ifdefs and the like
+to "work around" this (which would defeat the whole purpose of a
+portable API) the following facilities are provided.
+
+Actually, instead of describing the macros one by one, we'll
+transform some example code.
+
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
+ Example, before:
+
+ struct ring_state {
+ struct sk_buff *skb;
+ dma_addr_t mapping;
+ __u32 len;
+ };
+
+ after:
+
+ struct ring_state {
+ struct sk_buff *skb;
+ DEFINE_DMA_UNMAP_ADDR(mapping);
+ DEFINE_DMA_UNMAP_LEN(len);
+ };
+
+2) Use dma_unmap_{addr,len}_set to set these values.
+ Example, before:
+
+ ringp->mapping = FOO;
+ ringp->len = BAR;
+
+ after:
+
+ dma_unmap_addr_set(ringp, mapping, FOO);
+ dma_unmap_len_set(ringp, len, BAR);
+
+3) Use dma_unmap_{addr,len} to access these values.
+ Example, before:
+
+ dma_unmap_single(dev, ringp->mapping, ringp->len,
+ DMA_FROM_DEVICE);
+
+ after:
+
+ dma_unmap_single(dev,
+ dma_unmap_addr(ringp, mapping),
+ dma_unmap_len(ringp, len),
+ DMA_FROM_DEVICE);
+
+It really should be self-explanatory. We treat the ADDR and LEN
+separately, because it is possible for an implementation to only
+need the address in order to perform the unmap operation.
+
+ Platform Issues
+
+If you are just writing drivers for Linux and do not maintain
+an architecture port for the kernel, you can safely skip down
+to "Closing".
+
+1) Struct scatterlist requirements.
+
+ Struct scatterlist must contain, at a minimum, the following
+ members:
+
+ struct page *page;
+ unsigned int offset;
+ unsigned int length;
+
+ The base address is specified by a "page+offset" pair.
+
+ Previous versions of struct scatterlist contained a "void *address"
+ field that was sometimes used instead of page+offset. As of Linux
+ 2.5., page+offset is always used, and the "address" field has been
+ deleted.
+
+2) More to come...
+
+ Handling Errors
+
+DMA address space is limited on some architectures and an allocation
+failure can be determined by:
+
+- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
+
+- checking the returned dma_addr_t of dma_map_single and dma_map_page
+ by using dma_mapping_error():
+
+ dma_addr_t dma_handle;
+
+ dma_handle = dma_map_single(dev, addr, size, direction);
+ if (dma_mapping_error(dev, dma_handle)) {
+ /*
+ * reduce current DMA mapping usage,
+ * delay and try again later or
+ * reset driver.
+ */
+ }
+
+ Closing
+
+This document, and the API itself, would not be in it's current
+form without the feedback and suggestions from numerous individuals.
+We would like to specifically mention, in no particular order, the
+following people:
+
+ Russell King <rmk@arm.linux.org.uk>
+ Leo Dagum <dagum@barrel.engr.sgi.com>
+ Ralf Baechle <ralf@oss.sgi.com>
+ Grant Grundler <grundler@cup.hp.com>
+ Jay Estabrook <Jay.Estabrook@compaq.com>
+ Thomas Sailer <sailer@ife.ee.ethz.ch>
+ Andrea Arcangeli <andrea@suse.de>
+ Jens Axboe <jens.axboe@oracle.com>
+ David Mosberger-Tang <davidm@hpl.hp.com>
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
<para>
- Called by ata_device_add() after ata_dev_identify() determines
- a device is present.
- </para>
- <para>
This entry may be specified as NULL in ata_port_operations.
</para>
<sect2><title>Taskfile read/write</title>
<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
hardware registers / DMA buffers, to obtain the current set of
taskfile register values.
Most drivers for taskfile-based hardware (PIO or MMIO) use
- ata_tf_load() and ata_tf_read() for these hooks.
+ ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
</para>
</sect2>
<sect2><title>PIO data read/write</title>
<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
</programlisting>
<para>
All bmdma-style drivers must implement this hook. This is the low-level
operation that actually copies the data bytes during a PIO data
transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
causes an ATA command, previously loaded with
->tf_load(), to be initiated in hardware.
- Most drivers for taskfile-based hardware use ata_exec_command()
+ Most drivers for taskfile-based hardware use ata_sff_exec_command()
for this hook.
</para>
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*sff_check_status)(struct ata_port *ap);
+u8 (*sff_check_altstatus)(struct ata_port *ap);
</programlisting>
<para>
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
Most drivers for taskfile-based hardware use
- ata_check_status() for this hook.
- </para>
- <para>
- Note that because this is called from ata_device_add(), at
- least a dummy function that clears device interrupts must be
- provided for all drivers, even if the controller doesn't
- actually have a taskfile status register.
+ ata_sff_check_status() for this hook.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
<para>
</para>
<para>
Most drivers for taskfile-based hardware use
- ata_std_dev_select() for this hook. Controllers which do not
- support second drives on a port (such as SATA contollers) will
- use ata_noop_dev_select().
+ ata_sff_dev_select() for this hook.
</para>
</sect2>
to struct ata_host_set.
</para>
<para>
- Most legacy IDE drivers use ata_interrupt() for the
+ Most legacy IDE drivers use ata_sff_interrupt() for the
irq_handler hook, which scans all ports in the host_set,
determines which queued command was active (if any), and calls
- ata_host_intr(ap,qc).
+ ata_sff_host_intr(ap,qc).
</para>
<para>
- Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+ Most legacy IDE drivers use ata_sff_irq_clear() for the
irq_clear() hook, which simply clears the interrupt and error
flags in the DMA status register.
</para>
data from port at this time.
</para>
<para>
- Many drivers use ata_port_stop() as this hook, which frees the
- PRD table.
- </para>
- <para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.
</address>
</affiliation>
</author>
+ <author>
+ <firstname>William</firstname>
+ <surname>Cohen</surname>
+ <affiliation>
+ <address>
+ <email>wcohen@redhat.com</email>
+ </address>
+ </affiliation>
+ </author>
</authorgroup>
<legalnotice>
!Iinclude/trace/events/signal.h
</chapter>
+ <chapter id="block">
+ <title>Block IO</title>
+!Iinclude/trace/events/block.h
+ </chapter>
</book>
Linus, usually the patches that have already been included in the
-next kernel for a few weeks. The preferred way to submit big changes
is using git (the kernel's source management tool, more information
- can be found at http://git.or.cz/) but plain patches are also just
+ can be found at http://git-scm.com/) but plain patches are also just
fine.
- After two weeks a -rc1 kernel is released it is now possible to push
only patches that do not include new features that could affect the
+++ /dev/null
- Dynamic DMA mapping Guide
- =========================
-
- David S. Miller <davem@redhat.com>
- Richard Henderson <rth@cygnus.com>
- Jakub Jelinek <jakub@redhat.com>
-
-This is a guide to device driver writers on how to use the DMA API
-with example pseudo-code. For a concise description of the API, see
-DMA-API.txt.
-
-Most of the 64bit platforms have special hardware that translates bus
-addresses (DMA addresses) into physical addresses. This is similar to
-how page tables and/or a TLB translates virtual addresses to physical
-addresses on a CPU. This is needed so that e.g. PCI devices can
-access with a Single Address Cycle (32bit DMA address) any page in the
-64bit physical address space. Previously in Linux those 64bit
-platforms had to set artificial limits on the maximum RAM size in the
-system, so that the virt_to_bus() static scheme works (the DMA address
-translation tables were simply filled on bootup to map each bus
-address to the physical page __pa(bus_to_virt())).
-
-So that Linux can use the dynamic DMA mapping, it needs some help from the
-drivers, namely it has to take into account that DMA addresses should be
-mapped only for the time they are actually used and unmapped after the DMA
-transfer.
-
-The following API will work of course even on platforms where no such
-hardware exists.
-
-Note that the DMA API works with any bus independent of the underlying
-microprocessor architecture. You should use the DMA API rather than
-the bus specific DMA API (e.g. pci_dma_*).
-
-First of all, you should make sure
-
-#include <linux/dma-mapping.h>
-
-is in your driver. This file will obtain for you the definition of the
-dma_addr_t (which can hold any valid DMA address for the platform)
-type which should be used everywhere you hold a DMA (bus) address
-returned from the DMA mapping functions.
-
- What memory is DMA'able?
-
-The first piece of information you must know is what kernel memory can
-be used with the DMA mapping facilities. There has been an unwritten
-set of rules regarding this, and this text is an attempt to finally
-write them down.
-
-If you acquired your memory via the page allocator
-(i.e. __get_free_page*()) or the generic memory allocators
-(i.e. kmalloc() or kmem_cache_alloc()) then you may DMA to/from
-that memory using the addresses returned from those routines.
-
-This means specifically that you may _not_ use the memory/addresses
-returned from vmalloc() for DMA. It is possible to DMA to the
-_underlying_ memory mapped into a vmalloc() area, but this requires
-walking page tables to get the physical addresses, and then
-translating each of those pages back to a kernel address using
-something like __va(). [ EDIT: Update this when we integrate
-Gerd Knorr's generic code which does this. ]
-
-This rule also means that you may use neither kernel image addresses
-(items in data/text/bss segments), nor module image addresses, nor
-stack addresses for DMA. These could all be mapped somewhere entirely
-different than the rest of physical memory. Even if those classes of
-memory could physically work with DMA, you'd need to ensure the I/O
-buffers were cacheline-aligned. Without that, you'd see cacheline
-sharing problems (data corruption) on CPUs with DMA-incoherent caches.
-(The CPU could write to one word, DMA would write to a different one
-in the same cache line, and one of them could be overwritten.)
-
-Also, this means that you cannot take the return of a kmap()
-call and DMA to/from that. This is similar to vmalloc().
-
-What about block I/O and networking buffers? The block I/O and
-networking subsystems make sure that the buffers they use are valid
-for you to DMA from/to.
-
- DMA addressing limitations
-
-Does your device have any DMA addressing limitations? For example, is
-your device only capable of driving the low order 24-bits of address?
-If so, you need to inform the kernel of this fact.
-
-By default, the kernel assumes that your device can address the full
-32-bits. For a 64-bit capable device, this needs to be increased.
-And for a device with limitations, as discussed in the previous
-paragraph, it needs to be decreased.
-
-Special note about PCI: PCI-X specification requires PCI-X devices to
-support 64-bit addressing (DAC) for all transactions. And at least
-one platform (SGI SN2) requires 64-bit consistent allocations to
-operate correctly when the IO bus is in PCI-X mode.
-
-For correct operation, you must interrogate the kernel in your device
-probe routine to see if the DMA controller on the machine can properly
-support the DMA addressing limitation your device has. It is good
-style to do this even if your device holds the default setting,
-because this shows that you did think about these issues wrt. your
-device.
-
-The query is performed via a call to dma_set_mask():
-
- int dma_set_mask(struct device *dev, u64 mask);
-
-The query for consistent allocations is performed via a call to
-dma_set_coherent_mask():
-
- int dma_set_coherent_mask(struct device *dev, u64 mask);
-
-Here, dev is a pointer to the device struct of your device, and mask
-is a bit mask describing which bits of an address your device
-supports. It returns zero if your card can perform DMA properly on
-the machine given the address mask you provided. In general, the
-device struct of your device is embedded in the bus specific device
-struct of your device. For example, a pointer to the device struct of
-your PCI device is pdev->dev (pdev is a pointer to the PCI device
-struct of your device).
-
-If it returns non-zero, your device cannot perform DMA properly on
-this platform, and attempting to do so will result in undefined
-behavior. You must either use a different mask, or not use DMA.
-
-This means that in the failure case, you have three options:
-
-1) Use another DMA mask, if possible (see below).
-2) Use some non-DMA mode for data transfer, if possible.
-3) Ignore this device and do not initialize it.
-
-It is recommended that your driver print a kernel KERN_WARNING message
-when you end up performing either #2 or #3. In this manner, if a user
-of your driver reports that performance is bad or that the device is not
-even detected, you can ask them for the kernel messages to find out
-exactly why.
-
-The standard 32-bit addressing device would do something like this:
-
- if (dma_set_mask(dev, DMA_BIT_MASK(32))) {
- printk(KERN_WARNING
- "mydev: No suitable DMA available.\n");
- goto ignore_this_device;
- }
-
-Another common scenario is a 64-bit capable device. The approach here
-is to try for 64-bit addressing, but back down to a 32-bit mask that
-should not fail. The kernel may fail the 64-bit mask not because the
-platform is not capable of 64-bit addressing. Rather, it may fail in
-this case simply because 32-bit addressing is done more efficiently
-than 64-bit addressing. For example, Sparc64 PCI SAC addressing is
-more efficient than DAC addressing.
-
-Here is how you would handle a 64-bit capable device which can drive
-all 64-bits when accessing streaming DMA:
-
- int using_dac;
-
- if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
- using_dac = 1;
- } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
- using_dac = 0;
- } else {
- printk(KERN_WARNING
- "mydev: No suitable DMA available.\n");
- goto ignore_this_device;
- }
-
-If a card is capable of using 64-bit consistent allocations as well,
-the case would look like this:
-
- int using_dac, consistent_using_dac;
-
- if (!dma_set_mask(dev, DMA_BIT_MASK(64))) {
- using_dac = 1;
- consistent_using_dac = 1;
- dma_set_coherent_mask(dev, DMA_BIT_MASK(64));
- } else if (!dma_set_mask(dev, DMA_BIT_MASK(32))) {
- using_dac = 0;
- consistent_using_dac = 0;
- dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
- } else {
- printk(KERN_WARNING
- "mydev: No suitable DMA available.\n");
- goto ignore_this_device;
- }
-
-dma_set_coherent_mask() will always be able to set the same or a
-smaller mask as dma_set_mask(). However for the rare case that a
-device driver only uses consistent allocations, one would have to
-check the return value from dma_set_coherent_mask().
-
-Finally, if your device can only drive the low 24-bits of
-address you might do something like:
-
- if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
- printk(KERN_WARNING
- "mydev: 24-bit DMA addressing not available.\n");
- goto ignore_this_device;
- }
-
-When dma_set_mask() is successful, and returns zero, the kernel saves
-away this mask you have provided. The kernel will use this
-information later when you make DMA mappings.
-
-There is a case which we are aware of at this time, which is worth
-mentioning in this documentation. If your device supports multiple
-functions (for example a sound card provides playback and record
-functions) and the various different functions have _different_
-DMA addressing limitations, you may wish to probe each mask and
-only provide the functionality which the machine can handle. It
-is important that the last call to dma_set_mask() be for the
-most specific mask.
-
-Here is pseudo-code showing how this might be done:
-
- #define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
- #define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
-
- struct my_sound_card *card;
- struct device *dev;
-
- ...
- if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
- card->playback_enabled = 1;
- } else {
- card->playback_enabled = 0;
- printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
- card->name);
- }
- if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
- card->record_enabled = 1;
- } else {
- card->record_enabled = 0;
- printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
- card->name);
- }
-
-A sound card was used as an example here because this genre of PCI
-devices seems to be littered with ISA chips given a PCI front end,
-and thus retaining the 16MB DMA addressing limitations of ISA.
-
- Types of DMA mappings
-
-There are two types of DMA mappings:
-
-- Consistent DMA mappings which are usually mapped at driver
- initialization, unmapped at the end and for which the hardware should
- guarantee that the device and the CPU can access the data
- in parallel and will see updates made by each other without any
- explicit software flushing.
-
- Think of "consistent" as "synchronous" or "coherent".
-
- The current default is to return consistent memory in the low 32
- bits of the bus space. However, for future compatibility you should
- set the consistent mask even if this default is fine for your
- driver.
-
- Good examples of what to use consistent mappings for are:
-
- - Network card DMA ring descriptors.
- - SCSI adapter mailbox command data structures.
- - Device firmware microcode executed out of
- main memory.
-
- The invariant these examples all require is that any CPU store
- to memory is immediately visible to the device, and vice
- versa. Consistent mappings guarantee this.
-
- IMPORTANT: Consistent DMA memory does not preclude the usage of
- proper memory barriers. The CPU may reorder stores to
- consistent memory just as it may normal memory. Example:
- if it is important for the device to see the first word
- of a descriptor updated before the second, you must do
- something like:
-
- desc->word0 = address;
- wmb();
- desc->word1 = DESC_VALID;
-
- in order to get correct behavior on all platforms.
-
- Also, on some platforms your driver may need to flush CPU write
- buffers in much the same way as it needs to flush write buffers
- found in PCI bridges (such as by reading a register's value
- after writing it).
-
-- Streaming DMA mappings which are usually mapped for one DMA
- transfer, unmapped right after it (unless you use dma_sync_* below)
- and for which hardware can optimize for sequential accesses.
-
- This of "streaming" as "asynchronous" or "outside the coherency
- domain".
-
- Good examples of what to use streaming mappings for are:
-
- - Networking buffers transmitted/received by a device.
- - Filesystem buffers written/read by a SCSI device.
-
- The interfaces for using this type of mapping were designed in
- such a way that an implementation can make whatever performance
- optimizations the hardware allows. To this end, when using
- such mappings you must be explicit about what you want to happen.
-
-Neither type of DMA mapping has alignment restrictions that come from
-the underlying bus, although some devices may have such restrictions.
-Also, systems with caches that aren't DMA-coherent will work better
-when the underlying buffers don't share cache lines with other data.
-
-
- Using Consistent DMA mappings.
-
-To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
-you should do:
-
- dma_addr_t dma_handle;
-
- cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
-
-where device is a struct device *. This may be called in interrupt
-context with the GFP_ATOMIC flag.
-
-Size is the length of the region you want to allocate, in bytes.
-
-This routine will allocate RAM for that region, so it acts similarly to
-__get_free_pages (but takes size instead of a page order). If your
-driver needs regions sized smaller than a page, you may prefer using
-the dma_pool interface, described below.
-
-The consistent DMA mapping interfaces, for non-NULL dev, will by
-default return a DMA address which is 32-bit addressable. Even if the
-device indicates (via DMA mask) that it may address the upper 32-bits,
-consistent allocation will only return > 32-bit addresses for DMA if
-the consistent DMA mask has been explicitly changed via
-dma_set_coherent_mask(). This is true of the dma_pool interface as
-well.
-
-dma_alloc_coherent returns two values: the virtual address which you
-can use to access it from the CPU and dma_handle which you pass to the
-card.
-
-The cpu return address and the DMA bus master address are both
-guaranteed to be aligned to the smallest PAGE_SIZE order which
-is greater than or equal to the requested size. This invariant
-exists (for example) to guarantee that if you allocate a chunk
-which is smaller than or equal to 64 kilobytes, the extent of the
-buffer you receive will not cross a 64K boundary.
-
-To unmap and free such a DMA region, you call:
-
- dma_free_coherent(dev, size, cpu_addr, dma_handle);
-
-where dev, size are the same as in the above call and cpu_addr and
-dma_handle are the values dma_alloc_coherent returned to you.
-This function may not be called in interrupt context.
-
-If your driver needs lots of smaller memory regions, you can write
-custom code to subdivide pages returned by dma_alloc_coherent,
-or you can use the dma_pool API to do that. A dma_pool is like
-a kmem_cache, but it uses dma_alloc_coherent not __get_free_pages.
-Also, it understands common hardware constraints for alignment,
-like queue heads needing to be aligned on N byte boundaries.
-
-Create a dma_pool like this:
-
- struct dma_pool *pool;
-
- pool = dma_pool_create(name, dev, size, align, alloc);
-
-The "name" is for diagnostics (like a kmem_cache name); dev and size
-are as above. The device's hardware alignment requirement for this
-type of data is "align" (which is expressed in bytes, and must be a
-power of two). If your device has no boundary crossing restrictions,
-pass 0 for alloc; passing 4096 says memory allocated from this pool
-must not cross 4KByte boundaries (but at that time it may be better to
-go for dma_alloc_coherent directly instead).
-
-Allocate memory from a dma pool like this:
-
- cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
-
-flags are SLAB_KERNEL if blocking is permitted (not in_interrupt nor
-holding SMP locks), SLAB_ATOMIC otherwise. Like dma_alloc_coherent,
-this returns two values, cpu_addr and dma_handle.
-
-Free memory that was allocated from a dma_pool like this:
-
- dma_pool_free(pool, cpu_addr, dma_handle);
-
-where pool is what you passed to dma_pool_alloc, and cpu_addr and
-dma_handle are the values dma_pool_alloc returned. This function
-may be called in interrupt context.
-
-Destroy a dma_pool by calling:
-
- dma_pool_destroy(pool);
-
-Make sure you've called dma_pool_free for all memory allocated
-from a pool before you destroy the pool. This function may not
-be called in interrupt context.
-
- DMA Direction
-
-The interfaces described in subsequent portions of this document
-take a DMA direction argument, which is an integer and takes on
-one of the following values:
-
- DMA_BIDIRECTIONAL
- DMA_TO_DEVICE
- DMA_FROM_DEVICE
- DMA_NONE
-
-One should provide the exact DMA direction if you know it.
-
-DMA_TO_DEVICE means "from main memory to the device"
-DMA_FROM_DEVICE means "from the device to main memory"
-It is the direction in which the data moves during the DMA
-transfer.
-
-You are _strongly_ encouraged to specify this as precisely
-as you possibly can.
-
-If you absolutely cannot know the direction of the DMA transfer,
-specify DMA_BIDIRECTIONAL. It means that the DMA can go in
-either direction. The platform guarantees that you may legally
-specify this, and that it will work, but this may be at the
-cost of performance for example.
-
-The value DMA_NONE is to be used for debugging. One can
-hold this in a data structure before you come to know the
-precise direction, and this will help catch cases where your
-direction tracking logic has failed to set things up properly.
-
-Another advantage of specifying this value precisely (outside of
-potential platform-specific optimizations of such) is for debugging.
-Some platforms actually have a write permission boolean which DMA
-mappings can be marked with, much like page protections in the user
-program address space. Such platforms can and do report errors in the
-kernel logs when the DMA controller hardware detects violation of the
-permission setting.
-
-Only streaming mappings specify a direction, consistent mappings
-implicitly have a direction attribute setting of
-DMA_BIDIRECTIONAL.
-
-The SCSI subsystem tells you the direction to use in the
-'sc_data_direction' member of the SCSI command your driver is
-working on.
-
-For Networking drivers, it's a rather simple affair. For transmit
-packets, map/unmap them with the DMA_TO_DEVICE direction
-specifier. For receive packets, just the opposite, map/unmap them
-with the DMA_FROM_DEVICE direction specifier.
-
- Using Streaming DMA mappings
-
-The streaming DMA mapping routines can be called from interrupt
-context. There are two versions of each map/unmap, one which will
-map/unmap a single memory region, and one which will map/unmap a
-scatterlist.
-
-To map a single region, you do:
-
- struct device *dev = &my_dev->dev;
- dma_addr_t dma_handle;
- void *addr = buffer->ptr;
- size_t size = buffer->len;
-
- dma_handle = dma_map_single(dev, addr, size, direction);
-
-and to unmap it:
-
- dma_unmap_single(dev, dma_handle, size, direction);
-
-You should call dma_unmap_single when the DMA activity is finished, e.g.
-from the interrupt which told you that the DMA transfer is done.
-
-Using cpu pointers like this for single mappings has a disadvantage,
-you cannot reference HIGHMEM memory in this way. Thus, there is a
-map/unmap interface pair akin to dma_{map,unmap}_single. These
-interfaces deal with page/offset pairs instead of cpu pointers.
-Specifically:
-
- struct device *dev = &my_dev->dev;
- dma_addr_t dma_handle;
- struct page *page = buffer->page;
- unsigned long offset = buffer->offset;
- size_t size = buffer->len;
-
- dma_handle = dma_map_page(dev, page, offset, size, direction);
-
- ...
-
- dma_unmap_page(dev, dma_handle, size, direction);
-
-Here, "offset" means byte offset within the given page.
-
-With scatterlists, you map a region gathered from several regions by:
-
- int i, count = dma_map_sg(dev, sglist, nents, direction);
- struct scatterlist *sg;
-
- for_each_sg(sglist, sg, count, i) {
- hw_address[i] = sg_dma_address(sg);
- hw_len[i] = sg_dma_len(sg);
- }
-
-where nents is the number of entries in the sglist.
-
-The implementation is free to merge several consecutive sglist entries
-into one (e.g. if DMA mapping is done with PAGE_SIZE granularity, any
-consecutive sglist entries can be merged into one provided the first one
-ends and the second one starts on a page boundary - in fact this is a huge
-advantage for cards which either cannot do scatter-gather or have very
-limited number of scatter-gather entries) and returns the actual number
-of sg entries it mapped them to. On failure 0 is returned.
-
-Then you should loop count times (note: this can be less than nents times)
-and use sg_dma_address() and sg_dma_len() macros where you previously
-accessed sg->address and sg->length as shown above.
-
-To unmap a scatterlist, just call:
-
- dma_unmap_sg(dev, sglist, nents, direction);
-
-Again, make sure DMA activity has already finished.
-
-PLEASE NOTE: The 'nents' argument to the dma_unmap_sg call must be
- the _same_ one you passed into the dma_map_sg call,
- it should _NOT_ be the 'count' value _returned_ from the
- dma_map_sg call.
-
-Every dma_map_{single,sg} call should have its dma_unmap_{single,sg}
-counterpart, because the bus address space is a shared resource (although
-in some ports the mapping is per each BUS so less devices contend for the
-same bus address space) and you could render the machine unusable by eating
-all bus addresses.
-
-If you need to use the same streaming DMA region multiple times and touch
-the data in between the DMA transfers, the buffer needs to be synced
-properly in order for the cpu and device to see the most uptodate and
-correct copy of the DMA buffer.
-
-So, firstly, just map it with dma_map_{single,sg}, and after each DMA
-transfer call either:
-
- dma_sync_single_for_cpu(dev, dma_handle, size, direction);
-
-or:
-
- dma_sync_sg_for_cpu(dev, sglist, nents, direction);
-
-as appropriate.
-
-Then, if you wish to let the device get at the DMA area again,
-finish accessing the data with the cpu, and then before actually
-giving the buffer to the hardware call either:
-
- dma_sync_single_for_device(dev, dma_handle, size, direction);
-
-or:
-
- dma_sync_sg_for_device(dev, sglist, nents, direction);
-
-as appropriate.
-
-After the last DMA transfer call one of the DMA unmap routines
-dma_unmap_{single,sg}. If you don't touch the data from the first dma_map_*
-call till dma_unmap_*, then you don't have to call the dma_sync_*
-routines at all.
-
-Here is pseudo code which shows a situation in which you would need
-to use the dma_sync_*() interfaces.
-
- my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
- {
- dma_addr_t mapping;
-
- mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
-
- cp->rx_buf = buffer;
- cp->rx_len = len;
- cp->rx_dma = mapping;
-
- give_rx_buf_to_card(cp);
- }
-
- ...
-
- my_card_interrupt_handler(int irq, void *devid, struct pt_regs *regs)
- {
- struct my_card *cp = devid;
-
- ...
- if (read_card_status(cp) == RX_BUF_TRANSFERRED) {
- struct my_card_header *hp;
-
- /* Examine the header to see if we wish
- * to accept the data. But synchronize
- * the DMA transfer with the CPU first
- * so that we see updated contents.
- */
- dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
- cp->rx_len,
- DMA_FROM_DEVICE);
-
- /* Now it is safe to examine the buffer. */
- hp = (struct my_card_header *) cp->rx_buf;
- if (header_is_ok(hp)) {
- dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
- DMA_FROM_DEVICE);
- pass_to_upper_layers(cp->rx_buf);
- make_and_setup_new_rx_buf(cp);
- } else {
- /* Just sync the buffer and give it back
- * to the card.
- */
- dma_sync_single_for_device(&cp->dev,
- cp->rx_dma,
- cp->rx_len,
- DMA_FROM_DEVICE);
- give_rx_buf_to_card(cp);
- }
- }
- }
-
-Drivers converted fully to this interface should not use virt_to_bus any
-longer, nor should they use bus_to_virt. Some drivers have to be changed a
-little bit, because there is no longer an equivalent to bus_to_virt in the
-dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the dma_alloc_coherent, dma_pool_alloc, and dma_map_single
-calls (dma_map_sg stores them in the scatterlist itself if the platform
-supports dynamic DMA mapping in hardware) in your driver structures and/or
-in the card registers.
-
-All drivers should be using these interfaces with no exceptions. It
-is planned to completely remove virt_to_bus() and bus_to_virt() as
-they are entirely deprecated. Some ports already do not provide these
-as it is impossible to correctly support them.
-
- Optimizing Unmap State Space Consumption
-
-On many platforms, dma_unmap_{single,page}() is simply a nop.
-Therefore, keeping track of the mapping address and length is a waste
-of space. Instead of filling your drivers up with ifdefs and the like
-to "work around" this (which would defeat the whole purpose of a
-portable API) the following facilities are provided.
-
-Actually, instead of describing the macros one by one, we'll
-transform some example code.
-
-1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
- Example, before:
-
- struct ring_state {
- struct sk_buff *skb;
- dma_addr_t mapping;
- __u32 len;
- };
-
- after:
-
- struct ring_state {
- struct sk_buff *skb;
- DEFINE_DMA_UNMAP_ADDR(mapping);
- DEFINE_DMA_UNMAP_LEN(len);
- };
-
-2) Use dma_unmap_{addr,len}_set to set these values.
- Example, before:
-
- ringp->mapping = FOO;
- ringp->len = BAR;
-
- after:
-
- dma_unmap_addr_set(ringp, mapping, FOO);
- dma_unmap_len_set(ringp, len, BAR);
-
-3) Use dma_unmap_{addr,len} to access these values.
- Example, before:
-
- dma_unmap_single(dev, ringp->mapping, ringp->len,
- DMA_FROM_DEVICE);
-
- after:
-
- dma_unmap_single(dev,
- dma_unmap_addr(ringp, mapping),
- dma_unmap_len(ringp, len),
- DMA_FROM_DEVICE);
-
-It really should be self-explanatory. We treat the ADDR and LEN
-separately, because it is possible for an implementation to only
-need the address in order to perform the unmap operation.
-
- Platform Issues
-
-If you are just writing drivers for Linux and do not maintain
-an architecture port for the kernel, you can safely skip down
-to "Closing".
-
-1) Struct scatterlist requirements.
-
- Struct scatterlist must contain, at a minimum, the following
- members:
-
- struct page *page;
- unsigned int offset;
- unsigned int length;
-
- The base address is specified by a "page+offset" pair.
-
- Previous versions of struct scatterlist contained a "void *address"
- field that was sometimes used instead of page+offset. As of Linux
- 2.5., page+offset is always used, and the "address" field has been
- deleted.
-
-2) More to come...
-
- Handling Errors
-
-DMA address space is limited on some architectures and an allocation
-failure can be determined by:
-
-- checking if dma_alloc_coherent returns NULL or dma_map_sg returns 0
-
-- checking the returned dma_addr_t of dma_map_single and dma_map_page
- by using dma_mapping_error():
-
- dma_addr_t dma_handle;
-
- dma_handle = dma_map_single(dev, addr, size, direction);
- if (dma_mapping_error(dev, dma_handle)) {
- /*
- * reduce current DMA mapping usage,
- * delay and try again later or
- * reset driver.
- */
- }
-
- Closing
-
-This document, and the API itself, would not be in it's current
-form without the feedback and suggestions from numerous individuals.
-We would like to specifically mention, in no particular order, the
-following people:
-
- Russell King <rmk@arm.linux.org.uk>
- Leo Dagum <dagum@barrel.engr.sgi.com>
- Ralf Baechle <ralf@oss.sgi.com>
- Grant Grundler <grundler@cup.hp.com>
- Jay Estabrook <Jay.Estabrook@compaq.com>
- Thomas Sailer <sailer@ife.ee.ethz.ch>
- Andrea Arcangeli <andrea@suse.de>
- Jens Axboe <jens.axboe@oracle.com>
- David Mosberger-Tang <davidm@hpl.hp.com>
cpu = smp_processor_id();
++nmi_count(cpu);
- if (!rcu_dereference(nmi_callback)(regs, cpu))
+ if (!rcu_dereference_sched(nmi_callback)(regs, cpu))
default_do_nmi(regs);
nmi_exit();
default_do_nmi() function to handle a machine-specific NMI. Finally,
preemption is restored.
-Strictly speaking, rcu_dereference() is not needed, since this code runs
-only on i386, which does not need rcu_dereference() anyway. However,
-it is a good documentation aid, particularly for anyone attempting to
-do something similar on Alpha.
+In theory, rcu_dereference_sched() is not needed, since this code runs
+only on i386, which in theory does not need rcu_dereference_sched()
+anyway. However, in practice it is a good documentation aid, particularly
+for anyone attempting to do something similar on Alpha or on systems
+with aggressive optimizing compilers.
-Quick Quiz: Why might the rcu_dereference() be necessary on Alpha,
+Quick Quiz: Why might the rcu_dereference_sched() be necessary on Alpha,
given that the code referenced by the pointer is read-only?
Answer to Quick Quiz
- Why might the rcu_dereference() be necessary on Alpha, given
+ Why might the rcu_dereference_sched() be necessary on Alpha, given
that the code referenced by the pointer is read-only?
Answer: The caller to set_nmi_callback() might well have
- initialized some data that is to be used by the
- new NMI handler. In this case, the rcu_dereference()
- would be needed, because otherwise a CPU that received
- an NMI just after the new handler was set might see
- the pointer to the new NMI handler, but the old
- pre-initialized version of the handler's data.
-
- More important, the rcu_dereference() makes it clear
- to someone reading the code that the pointer is being
- protected by RCU.
+ initialized some data that is to be used by the new NMI
+ handler. In this case, the rcu_dereference_sched() would
+ be needed, because otherwise a CPU that received an NMI
+ just after the new handler was set might see the pointer
+ to the new NMI handler, but the old pre-initialized
+ version of the handler's data.
+
+ This same sad story can happen on other CPUs when using
+ a compiler with aggressive pointer-value speculation
+ optimizations.
+
+ More important, the rcu_dereference_sched() makes it
+ clear to someone reading the code that the pointer is
+ being protected by RCU-sched.
The reason that it is permissible to use RCU list-traversal
primitives when the update-side lock is held is that doing so
can be quite helpful in reducing code bloat when common code is
- shared between readers and updaters.
+ shared between readers and updaters. Additional primitives
+ are provided for this case, as discussed in lockdep.txt.
10. Conversely, if you are in an RCU read-side critical section,
and you don't hold the appropriate update-side lock, you -must-
requiring SRCU's read-side deadlock immunity or low read-side
realtime latency.
- Note that, rcu_assign_pointer() and rcu_dereference() relate to
- SRCU just as they do to other forms of RCU.
+ Note that, rcu_assign_pointer() relates to SRCU just as they do
+ to other forms of RCU.
15. The whole point of call_rcu(), synchronize_rcu(), and friends
is to wait until all pre-existing readers have finished before
srcu_dereference(p, sp):
Check for SRCU read-side critical section.
rcu_dereference_check(p, c):
- Use explicit check expression "c".
+ Use explicit check expression "c". This is useful in
+ code that is invoked by both readers and updaters.
rcu_dereference_raw(p)
Don't check. (Use sparingly, if at all.)
+ rcu_dereference_protected(p, c):
+ Use explicit check expression "c", and omit all barriers
+ and compiler constraints. This is useful when the data
+ structure cannot change, for example, in code that is
+ invoked only by updaters.
+ rcu_access_pointer(p):
+ Return the value of the pointer and omit all barriers,
+ but retain the compiler constraints that prevent duplicating
+ or coalescsing. This is useful when when testing the
+ value of the pointer itself, for example, against NULL.
The rcu_dereference_check() check expression can be any boolean
expression, but would normally include one of the rcu_read_lock_held()
RCU read-side critical sections, in case (2) the ->file_lock prevents
any change from taking place, and finally, in case (3) the current task
is the only task accessing the file_struct, again preventing any change
-from taking place.
+from taking place. If the above statement was invoked only from updater
+code, it could instead be written as follows:
+
+ file = rcu_dereference_protected(fdt->fd[fd],
+ lockdep_is_held(&files->file_lock) ||
+ atomic_read(&files->count) == 1);
+
+This would verify cases #2 and #3 above, and furthermore lockdep would
+complain if this was used in an RCU read-side critical section unless one
+of these two cases held. Because rcu_dereference_protected() omits all
+barriers and compiler constraints, it generates better code than do the
+other flavors of rcu_dereference(). On the other hand, it is illegal
+to use rcu_dereference_protected() if either the RCU-protected pointer
+or the RCU-protected data that it points to can change concurrently.
There are currently only "universal" versions of the rcu_assign_pointer()
and RCU list-/tree-traversal primitives, which do not (yet) check for
init_srcu_struct
cleanup_srcu_struct
+All: lockdep-checked RCU-protected pointer access
+
+ rcu_dereference_check
+ rcu_dereference_protected
+ rcu_access_pointer
+
See the comment headers in the source code (or the docbook generated
from them) for more information.
As mentioned, there is no virtual mapping of a bio. For DMA, this is
not a problem as the driver probably never will need a virtual mapping.
-Instead it needs a bus mapping (pci_map_page for a single segment or
-use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For
+Instead it needs a bus mapping (dma_map_page for a single segment or
+use dma_map_sg for scatter gather) to be able to ship it to the driver. For
PIO drivers (or drivers that need to revert to PIO transfer once in a
while (IDE for example)), where the CPU is doing the actual data
transfer a virtual mapping is needed. If the driver supports highmem I/O,
- cgroup.procs: list of tgids in the cgroup. This list is not
guaranteed to be sorted or free of duplicate tgids, and userspace
should sort/uniquify the list if this property is required.
- Writing a tgid into this file moves all threads with that tgid into
- this cgroup.
+ This is a read-only file, for now.
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroups' swapiness can't be changed.
+ Following cgroups' swappiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.
--- /dev/null
+ ================
+ CIRCULAR BUFFERS
+ ================
+
+By: David Howells <dhowells@redhat.com>
+ Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+
+Linux provides a number of features that can be used to implement circular
+buffering. There are two sets of such features:
+
+ (1) Convenience functions for determining information about power-of-2 sized
+ buffers.
+
+ (2) Memory barriers for when the producer and the consumer of objects in the
+ buffer don't want to share a lock.
+
+To use these facilities, as discussed below, there needs to be just one
+producer and just one consumer. It is possible to handle multiple producers by
+serialising them, and to handle multiple consumers by serialising them.
+
+
+Contents:
+
+ (*) What is a circular buffer?
+
+ (*) Measuring power-of-2 buffers.
+
+ (*) Using memory barriers with circular buffers.
+ - The producer.
+ - The consumer.
+
+
+==========================
+WHAT IS A CIRCULAR BUFFER?
+==========================
+
+First of all, what is a circular buffer? A circular buffer is a buffer of
+fixed, finite size into which there are two indices:
+
+ (1) A 'head' index - the point at which the producer inserts items into the
+ buffer.
+
+ (2) A 'tail' index - the point at which the consumer finds the next item in
+ the buffer.
+
+Typically when the tail pointer is equal to the head pointer, the buffer is
+empty; and the buffer is full when the head pointer is one less than the tail
+pointer.
+
+The head index is incremented when items are added, and the tail index when
+items are removed. The tail index should never jump the head index, and both
+indices should be wrapped to 0 when they reach the end of the buffer, thus
+allowing an infinite amount of data to flow through the buffer.
+
+Typically, items will all be of the same unit size, but this isn't strictly
+required to use the techniques below. The indices can be increased by more
+than 1 if multiple items or variable-sized items are to be included in the
+buffer, provided that neither index overtakes the other. The implementer must
+be careful, however, as a region more than one unit in size may wrap the end of
+the buffer and be broken into two segments.
+
+
+============================
+MEASURING POWER-OF-2 BUFFERS
+============================
+
+Calculation of the occupancy or the remaining capacity of an arbitrarily sized
+circular buffer would normally be a slow operation, requiring the use of a
+modulus (divide) instruction. However, if the buffer is of a power-of-2 size,
+then a much quicker bitwise-AND instruction can be used instead.
+
+Linux provides a set of macros for handling power-of-2 circular buffers. These
+can be made use of by:
+
+ #include <linux/circ_buf.h>
+
+The macros are:
+
+ (*) Measure the remaining capacity of a buffer:
+
+ CIRC_SPACE(head_index, tail_index, buffer_size);
+
+ This returns the amount of space left in the buffer[1] into which items
+ can be inserted.
+
+
+ (*) Measure the maximum consecutive immediate space in a buffer:
+
+ CIRC_SPACE_TO_END(head_index, tail_index, buffer_size);
+
+ This returns the amount of consecutive space left in the buffer[1] into
+ which items can be immediately inserted without having to wrap back to the
+ beginning of the buffer.
+
+
+ (*) Measure the occupancy of a buffer:
+
+ CIRC_CNT(head_index, tail_index, buffer_size);
+
+ This returns the number of items currently occupying a buffer[2].
+
+
+ (*) Measure the non-wrapping occupancy of a buffer:
+
+ CIRC_CNT_TO_END(head_index, tail_index, buffer_size);
+
+ This returns the number of consecutive items[2] that can be extracted from
+ the buffer without having to wrap back to the beginning of the buffer.
+
+
+Each of these macros will nominally return a value between 0 and buffer_size-1,
+however:
+
+ [1] CIRC_SPACE*() are intended to be used in the producer. To the producer
+ they will return a lower bound as the producer controls the head index,
+ but the consumer may still be depleting the buffer on another CPU and
+ moving the tail index.
+
+ To the consumer it will show an upper bound as the producer may be busy
+ depleting the space.
+
+ [2] CIRC_CNT*() are intended to be used in the consumer. To the consumer they
+ will return a lower bound as the consumer controls the tail index, but the
+ producer may still be filling the buffer on another CPU and moving the
+ head index.
+
+ To the producer it will show an upper bound as the consumer may be busy
+ emptying the buffer.
+
+ [3] To a third party, the order in which the writes to the indices by the
+ producer and consumer become visible cannot be guaranteed as they are
+ independent and may be made on different CPUs - so the result in such a
+ situation will merely be a guess, and may even be negative.
+
+
+===========================================
+USING MEMORY BARRIERS WITH CIRCULAR BUFFERS
+===========================================
+
+By using memory barriers in conjunction with circular buffers, you can avoid
+the need to:
+
+ (1) use a single lock to govern access to both ends of the buffer, thus
+ allowing the buffer to be filled and emptied at the same time; and
+
+ (2) use atomic counter operations.
+
+There are two sides to this: the producer that fills the buffer, and the
+consumer that empties it. Only one thing should be filling a buffer at any one
+time, and only one thing should be emptying a buffer at any one time, but the
+two sides can operate simultaneously.
+
+
+THE PRODUCER
+------------
+
+The producer will look something like this:
+
+ spin_lock(&producer_lock);
+
+ unsigned long head = buffer->head;
+ unsigned long tail = ACCESS_ONCE(buffer->tail);
+
+ if (CIRC_SPACE(head, tail, buffer->size) >= 1) {
+ /* insert one item into the buffer */
+ struct item *item = buffer[head];
+
+ produce_item(item);
+
+ smp_wmb(); /* commit the item before incrementing the head */
+
+ buffer->head = (head + 1) & (buffer->size - 1);
+
+ /* wake_up() will make sure that the head is committed before
+ * waking anyone up */
+ wake_up(consumer);
+ }
+
+ spin_unlock(&producer_lock);
+
+This will instruct the CPU that the contents of the new item must be written
+before the head index makes it available to the consumer and then instructs the
+CPU that the revised head index must be written before the consumer is woken.
+
+Note that wake_up() doesn't have to be the exact mechanism used, but whatever
+is used must guarantee a (write) memory barrier between the update of the head
+index and the change of state of the consumer, if a change of state occurs.
+
+
+THE CONSUMER
+------------
+
+The consumer will look something like this:
+
+ spin_lock(&consumer_lock);
+
+ unsigned long head = ACCESS_ONCE(buffer->head);
+ unsigned long tail = buffer->tail;
+
+ if (CIRC_CNT(head, tail, buffer->size) >= 1) {
+ /* read index before reading contents at that index */
+ smp_read_barrier_depends();
+
+ /* extract one item from the buffer */
+ struct item *item = buffer[tail];
+
+ consume_item(item);
+
+ smp_mb(); /* finish reading descriptor before incrementing tail */
+
+ buffer->tail = (tail + 1) & (buffer->size - 1);
+ }
+
+ spin_unlock(&consumer_lock);
+
+This will instruct the CPU to make sure the index is up to date before reading
+the new item, and then it shall make sure the CPU has finished reading the item
+before it writes the new tail pointer, which will erase the item.
+
+
+Note the use of ACCESS_ONCE() in both algorithms to read the opposition index.
+This prevents the compiler from discarding and reloading its cached value -
+which some compilers will do across smp_read_barrier_depends(). This isn't
+strictly needed if you can be sure that the opposition index will _only_ be
+used the once.
+
+
+===============
+FURTHER READING
+===============
+
+See also Documentation/memory-barriers.txt for a description of Linux's memory
+barrier facilities.
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/connector.h>
--- /dev/null
+
+What is efifb?
+===============
+
+This is a generic EFI platform driver for Intel based Apple computers.
+efifb is only for EFI booted Intel Macs.
+
+Supported Hardware
+==================
+
+iMac 17"/20"
+Macbook
+Macbook Pro 15"/17"
+MacMini
+
+How to use it?
+==============
+
+efifb does not have any kind of autodetection of your machine.
+You have to add the following kernel parameters in your elilo.conf:
+ Macbook :
+ video=efifb:macbook
+ MacMini :
+ video=efifb:mini
+ Macbook Pro 15", iMac 17" :
+ video=efifb:i17
+ Macbook Pro 17", iMac 20" :
+ video=efifb:i20
+
+--
+Edgar Hucek <gimli@dark-green.com>
+++ /dev/null
-
-What is imacfb?
-===============
-
-This is a generic EFI platform driver for Intel based Apple computers.
-Imacfb is only for EFI booted Intel Macs.
-
-Supported Hardware
-==================
-
-iMac 17"/20"
-Macbook
-Macbook Pro 15"/17"
-MacMini
-
-How to use it?
-==============
-
-Imacfb does not have any kind of autodetection of your machine.
-You have to add the following kernel parameters in your elilo.conf:
- Macbook :
- video=imacfb:macbook
- MacMini :
- video=imacfb:mini
- Macbook Pro 15", iMac 17" :
- video=imacfb:i17
- Macbook Pro 17", iMac 20" :
- video=imacfb:i20
-
---
-Edgar Hucek <gimli@dark-green.com>
Generally invoked by accident today.
Seen as doing more harm than good.
Who: Len Brown <len.brown@intel.com>
+
+----------------------------
+
+What: video4linux /dev/vtx teletext API support
+When: 2.6.35
+Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
+ include/linux/videotext.h
+Why: The vtx device nodes have been superseded by vbi device nodes
+ for many years. No applications exist that use the vtx support.
+ Of the two i2c drivers that actually support this API the saa5249
+ has been impossible to use for a year now and no known hardware
+ that supports this device exists. The saa5246a is theoretically
+ supported by the old mxb boards, but it never actually worked.
+
+ In summary: there is no hardware that can use this API and there
+ are no applications actually implementing this API.
+
+ The vtx support still reserves minors 192-223 and we would really
+ like to reuse those for upcoming new functionality. In the unlikely
+ event that new hardware appears that wants to use the functionality
+ provided by the vtx API, then that functionality should be build
+ around the sliced VBI API instead.
+Who: Hans Verkuil <hverkuil@xs4all.nl>
- information about the BeOS filesystem for Linux.
bfs.txt
- info for the SCO UnixWare Boot Filesystem (BFS).
+ceph.txt
+ - info for the Ceph Distributed File System
cifs.txt
- description of the CIFS filesystem.
coda.txt
mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER
+For server running on QEMU host with virtio transport:
+
+ mount -t 9p -o trans=virtio <mount_tag> /mnt/9
+
+where mount_tag is the tag associated by the server to each of the exported
+mount points. Each 9P export is seen by the client as a virtio device with an
+associated "mount_tag" property. Available mount tags can be
+seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
+
OPTIONS
=======
fd - used passed file descriptors for connection
(see rfdno and wfdno)
virtio - connect to the next virtio channel available
- (from lguest or KVM with trans_virtio module)
+ (from QEMU with trans_virtio module)
rdma - connect to a specified RDMA channel
uname=name user name to attempt mount as on the remote server. The
port=n port to connect to on the remote server
- noextend force legacy mode (no 9p2000.u semantics)
+ noextend force legacy mode (no 9p2000.u or 9p2000.L semantics)
+
+ version=name Select 9P protocol version. Valid options are:
+ 9p2000 - Legacy mode (same as noextend)
+ 9p2000.u - Use 9P2000.u protocol
+ 9p2000.L - Use 9P2000.L protocol
dfltuid attempt to mount as a particular uid
* POSIX semantics
* Seamless scaling from 1 to many thousands of nodes
- * High availability and reliability. No single points of failure.
+ * High availability and reliability. No single point of failure.
* N-way replication of data across storage nodes
* Fast recovery from node failures
* Automatic rebalancing of data on node addition/removal
wsize=X
Specify the maximum write size in bytes. By default there is no
- maximu. Ceph will normally size writes based on the file stripe
+ maximum. Ceph will normally size writes based on the file stripe
size.
rsize=X
number of entries in that directory.
nocrc
- Disable CRC32C calculation for data writes. If set, the OSD
+ Disable CRC32C calculation for data writes. If set, the storage node
must rely on TCP's error correction to detect data corruption
in the data payload.
http://ceph.newdream.net/
The Linux kernel client source tree is available at
- git://ceph.newdream.net/linux-ceph-client.git
+ git://ceph.newdream.net/git/ceph-client.git
+ git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
and the source for the full system is at
- git://ceph.newdream.net/ceph.git
+ git://ceph.newdream.net/git/ceph.git
all files in that instance (if CONFIG_NUMA is enabled) - which can be
adjusted on the fly via 'mount -o remount ...'
-mpol=default prefers to allocate memory from the local node
+mpol=default use the process allocation policy
+ (see set_mempolicy(2))
mpol=prefer:Node prefers to allocate memory from the given Node
mpol=bind:NodeList allocates memory only from nodes in NodeList
mpol=interleave prefers to allocate from each node in turn
mpol=interleave:NodeList allocates from each node of NodeList in turn
+mpol=local prefers to allocate memory from the local node
NodeList format is a comma-separated list of decimal numbers and ranges,
a range being two hyphen-separated decimal numbers, the smallest and
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
Hugh Dickins, 4 June 2007
+Updated:
+ KOSAKI Motohiro, 16 Mar 2010
/* retrieve the value */
void *i2c_get_clientdata(const struct i2c_client *client);
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
Accessing the client
====================
byte 1:
bit 7 6 5 4 3 2 1 0
- x15 x14 x13 x12 x11 x10 x9 x8
+ . . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
- x15..x0 = absolute x value (horizontal)
+ x10..x0 = absolute x value (horizontal)
byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
- y15 y14 y13 y12 y11 y10 y8 y8
+ . . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
- y15..y0 = absolute y value (vertical)
+ y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch
SYN_MT_REPORT
SYN_REPORT
+Here is the sequence after lifting one of the fingers:
+
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
+
+And here is the sequence after lifting the remaining finger:
+
+ SYN_MT_REPORT
+ SYN_REPORT
+
+If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the
+ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the
+last SYN_REPORT will be dropped by the input core, resulting in no
+zero-finger event reaching userland.
Event Semantics
---------------
difference between the contact position and the approaching tool position
could be used to derive tilt.
[2] The list can of course be extended.
-[3] The multi-touch X driver is currently in the prototyping stage. At the
-time of writing (April 2009), the MT protocol is not yet merged, and the
-prototype implements finger matching, basic mouse support and two-finger
-scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the Synaptics X driver, and in addition
-implement more advanced gestures.
+[3] Multitouch X driver project: http://bitmath.org/code/multitouch/.
[4] See the section on event computation.
[5] See the section on finger tracking.
amd_iommu= [HW,X86-84]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
- isolate - enable device isolation (each device, as far
- as possible, will get its own protection
- domain) [default]
- share - put every device behind one IOMMU into the
- same protection domain
fullflush - enable flushing of IO/TLB entries when
they are unmapped. Otherwise they are
flushed before they will be reused, which
libata.force= [LIBATA] Force configurations. The format is comma
separated list of "[ID:]VAL" where ID is
- PORT[:DEVICE]. PORT and DEVICE are decimal numbers
+ PORT[.DEVICE]. PORT and DEVICE are decimal numbers
matching port, link or device. Basically, it matches
the ATA ID string printed on console by libata. If
the whole ID part is omitted, the last PORT and DEVICE
============================
By: David Howells <dhowells@redhat.com>
+ Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Contents:
- And then there's the Alpha.
+ (*) Example uses.
+
+ - Circular buffers.
+
(*) References.
See the subsection on "Cache Coherency" above.
+============
+EXAMPLE USES
+============
+
+CIRCULAR BUFFERS
+----------------
+
+Memory barriers can be used to implement circular buffering without the need
+of a lock to serialise the producer with the consumer. See:
+
+ Documentation/circular-buffers.txt
+
+for details.
+
+
==========
REFERENCES
==========
--- /dev/null
+ STMicroelectronics 10/100/1000 Synopsys Ethernet driver
+
+Copyright (C) 2007-2010 STMicroelectronics Ltd
+Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
+(Synopsys IP blocks); it has been fully tested on STLinux platforms.
+
+Currently this network device driver is for all STM embedded MAC/GMAC
+(7xxx SoCs).
+
+DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
+Universal version 4.0 have been used for developing the first code
+implementation.
+
+Please, for more information also visit: www.stlinux.com
+
+1) Kernel Configuration
+The kernel configuration option is STMMAC_ETH:
+ Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
+ STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
+
+2) Driver parameters list:
+ debug: message level (0: no output, 16: all);
+ phyaddr: to manually provide the physical address to the PHY device;
+ dma_rxsize: DMA rx ring size;
+ dma_txsize: DMA tx ring size;
+ buf_sz: DMA buffer size;
+ tc: control the HW FIFO threshold;
+ tx_coe: Enable/Disable Tx Checksum Offload engine;
+ watchdog: transmit timeout (in milliseconds);
+ flow_ctrl: Flow control ability [on/off];
+ pause: Flow Control Pause Time;
+ tmrate: timer period (only if timer optimisation is configured).
+
+3) Command line options
+Driver parameters can be also passed in command line by using:
+ stmmaceth=dma_rxsize:128,dma_txsize:512
+
+4) Driver information and notes
+
+4.1) Transmit process
+The xmit method is invoked when the kernel needs to transmit a packet; it sets
+the descriptors in the ring and informs the DMA engine that there is a packet
+ready to be transmitted.
+Once the controller has finished transmitting the packet, an interrupt is
+triggered; So the driver will be able to release the socket buffers.
+By default, the driver sets the NETIF_F_SG bit in the features field of the
+net_device structure enabling the scatter/gather feature.
+
+4.2) Receive process
+When one or more packets are received, an interrupt happens. The interrupts
+are not queued so the driver has to scan all the descriptors in the ring during
+the receive process.
+This is based on NAPI so the interrupt handler signals only if there is work to be
+done, and it exits.
+Then the poll method will be scheduled at some future point.
+The incoming packets are stored, by the DMA, in a list of pre-allocated socket
+buffers in order to avoid the memcpy (Zero-copy).
+
+4.3) Timer-Driver Interrupt
+Instead of having the device that asynchronously notifies the frame receptions, the
+driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the device
+will experience different levels of latency. Some NICs have dedicated timer
+device to perform this task. STMMAC can use either the RTC device or the TMU
+channel 2 on STLinux platforms.
+The timers frequency can be passed to the driver as parameter; when change it,
+take care of both hardware capability and network stability/performance impact.
+Several performance tests on STM platforms showed this optimisation allows to spare
+the CPU while having the maximum throughput.
+
+4.4) WOL
+Wake up on Lan feature through Magic Frame is only supported for the GMAC
+core.
+
+4.5) DMA descriptors
+Driver handles both normal and enhanced descriptors. The latter has been only
+tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
+
+4.6) Ethtool support
+Ethtool is supported. Driver statistics and internal errors can be taken using:
+ethtool -S ethX command. It is possible to dump registers etc.
+
+4.7) Jumbo and Segmentation Offloading
+Jumbo frames are supported and tested for the GMAC.
+The GSO has been also added but it's performed in software.
+LRO is not supported.
+
+4.8) Physical
+The driver is compatible with PAL to work with PHY and GPHY devices.
+
+4.9) Platform information
+Several information came from the platform; please refer to the
+driver's Header file in include/linux directory.
+
+struct plat_stmmacenet_data {
+ int bus_id;
+ int pbl;
+ int has_gmac;
+ void (*fix_mac_speed)(void *priv, unsigned int speed);
+ void (*bus_setup)(unsigned long ioaddr);
+#ifdef CONFIG_STM_DRIVERS
+ struct stm_pad_config *pad_config;
+#endif
+ void *bsp_priv;
+};
+
+Where:
+- pbl (Programmable Burst Length) is maximum number of
+ beats to be transferred in one DMA transaction.
+ GMAC also enables the 4xPBL by default.
+- fix_mac_speed and bus_setup are used to configure internal target
+ registers (on STM platforms);
+- has_gmac: GMAC core is on board (get it at run-time in the next step);
+- bus_id: bus identifier.
+
+struct plat_stmmacphy_data {
+ int bus_id;
+ int phy_addr;
+ unsigned int phy_mask;
+ int interface;
+ int (*phy_reset)(void *priv);
+ void *priv;
+};
+
+Where:
+- bus_id: bus identifier;
+- phy_addr: physical address used for the attached phy device;
+ set it to -1 to get it at run-time;
+- interface: physical MII interface mode;
+- phy_reset: hook to reset HW function.
+
+TODO:
+- Continue to make the driver more generic and suitable for other Synopsys
+ Ethernet controllers used on other architectures (i.e. ARM).
+- 10G controllers are not supported.
+- MAC uses Normal descriptors and GMAC uses enhanced ones.
+ This is a limit that should be reviewed. MAC could want to
+ use the enhanced structure.
+- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
+- Review the timer optimisation code to use an embedded device that seems to be
+ available in new chip generations.
SOF_TIMESTAMPING_TX/RX determine how time stamps are generated.
SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the
following control message:
- struct scm_timestamping {
- struct timespec systime;
- struct timespec hwtimetrans;
- struct timespec hwtimeraw;
- };
+
+struct scm_timestamping {
+ struct timespec systime;
+ struct timespec hwtimetrans;
+ struct timespec hwtimeraw;
+};
recvmsg() can be used to get this control message for regular incoming
packets. For send time stamps the outgoing packet is looped back to
SIOCSHWTSTAMP:
Hardware time stamping must also be initialized for each device driver
-that is expected to do hardware time stamping. The parameter is:
+that is expected to do hardware time stamping. The parameter is defined in
+/include/linux/net_tstamp.h as:
struct hwtstamp_config {
- int flags; /* no flags defined right now, must be zero */
- int tx_type; /* HWTSTAMP_TX_* */
- int rx_filter; /* HWTSTAMP_FILTER_* */
+ int flags; /* no flags defined right now, must be zero */
+ int tx_type; /* HWTSTAMP_TX_* */
+ int rx_filter; /* HWTSTAMP_FILTER_* */
};
Desired behavior is passed into the kernel and to a specific device by
/* time stamp any incoming packet */
HWTSTAMP_FILTER_ALL,
- /* return value: time stamp all packets requested plus some others */
- HWTSTAMP_FILTER_SOME,
+ /* return value: time stamp all packets requested plus some others */
+ HWTSTAMP_FILTER_SOME,
/* PTP v1, UDP, any kind of event packet */
HWTSTAMP_FILTER_PTP_V1_L4_EVENT,
- ...
+ /* for the complete list of values, please check
+ * the include file /include/linux/net_tstamp.h
+ */
};
DEVICE IMPLEMENTATION
A driver which supports hardware time stamping must support the
-SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored
-in the skb with skb_hwtstamp_set().
+SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
+the actual values as described in the section on SIOCSHWTSTAMP.
+
+Time stamps for received packets must be stored in the skb. To get a pointer
+to the shared time stamp structure of the skb call skb_hwtstamps(). Then
+set the time stamps in the structure:
+
+struct skb_shared_hwtstamps {
+ /* hardware time stamp transformed into duration
+ * since arbitrary point in time
+ */
+ ktime_t hwtstamp;
+ ktime_t syststamp; /* hwtstamp transformed to system time base */
+};
Time stamps for outgoing packets are to be generated as follows:
-- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware()
- returns non-zero. If yes, then the driver is expected
- to do hardware time stamping.
+- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero.
+ If yes, then the driver is expected to do hardware time stamping.
- If this is possible for the skb and requested, then declare
- that the driver is doing the time stamping by calling
- skb_hwtstamp_tx_in_progress(). A driver not supporting
- hardware time stamping doesn't do that. A driver must never
- touch sk_buff::tstamp! It is used to store how time stamping
- for an outgoing packets is to be done.
+ that the driver is doing the time stamping by setting the field
+ skb_tx(skb)->in_progress non-zero. You might want to keep a pointer
+ to the associated skb for the next step and not free the skb. A driver
+ not supporting hardware time stamping doesn't do that. A driver must
+ never touch sk_buff::tstamp! It is used to store software generated
+ time stamps by the network subsystem.
- As soon as the driver has sent the packet and/or obtained a
hardware time stamp for it, it passes the time stamp back by
calling skb_hwtstamp_tx() with the original skb, the raw
- hardware time stamp and a handle to the device (necessary
- to convert the hardware time stamp to system time). If obtaining
- the hardware time stamp somehow fails, then the driver should
- not fall back to software time stamping. The rationale is that
- this would occur at a later time in the processing pipeline
- than other software time stamping and therefore could lead
- to unexpected deltas between time stamps.
-- If the driver did not call skb_hwtstamp_tx_in_progress(), then
+ hardware time stamp. skb_hwtstamp_tx() clones the original skb and
+ adds the timestamps, therefore the original skb has to be freed now.
+ If obtaining the hardware time stamp somehow fails, then the driver
+ should not fall back to software time stamping. The rationale is that
+ this would occur at a later time in the processing pipeline than other
+ software time stamping and therefore could lead to unexpected deltas
+ between time stamps.
+- If the driver did not call set skb_tx(skb)->in_progress, then
dev_hard_start_xmit() checks whether software time stamping
is wanted as fallback and potentially generates the time stamp.
- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
threads.
+Optional properties:
+- fsl,firmware-phandle:
+ Usage: required only if there is no fsl,qe-firmware child node
+ Value type: <phandle>
+ Definition: Points to a firmware node (see "QE Firmware Node" below)
+ that contains the firmware that should be uploaded for this QE.
+ The compatible property for the firmware node should say,
+ "fsl,qe-firmware".
+
Recommended properties
- brg-frequency : the internal clock source frequency for baud-rate
generators in Hz.
reg = <0 c000>;
};
};
+
+* QE Firmware Node
+
+This node defines a firmware binary that is embedded in the device tree, for
+the purpose of passing the firmware from bootloader to the kernel, or from
+the hypervisor to the guest.
+
+The firmware node itself contains the firmware binary contents, a compatible
+property, and any firmware-specific properties. The node should be placed
+inside a QE node that needs it. Doing so eliminates the need for a
+fsl,firmware-phandle property. Other QE nodes that need the same firmware
+should define an fsl,firmware-phandle property that points to the firmware node
+in the first QE node.
+
+The fsl,firmware property can be specified in the DTS (possibly using incbin)
+or can be inserted by the boot loader at boot time.
+
+Required properties:
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: A standard property. Specify a string that indicates what
+ kind of firmware it is. For QE, this should be "fsl,qe-firmware".
+
+ - fsl,firmware
+ Usage: required
+ Value type: <prop-encoded-array>, encoded as an array of bytes
+ Definition: A standard property. This property contains the firmware
+ binary "blob".
+
+Example:
+ qe1@e0080000 {
+ compatible = "fsl,qe";
+ qe_firmware:qe-firmware {
+ compatible = "fsl,qe-firmware";
+ fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...];
+ };
+ ...
+ };
+
+ qe2@e0090000 {
+ compatible = "fsl,qe";
+ fsl,firmware-phandle = <&qe_firmware>;
+ ...
+ };
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
- if (ret == 1)
+ if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
- It cannot contain any "trivial" fixes in it (spelling changes,
whitespace cleanups, etc).
- It must follow the Documentation/SubmittingPatches rules.
- - It or an equivalent fix must already exist in Linus' tree. Quote the
- respective commit ID in Linus' tree in your patch submission to -stable.
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
Procedure for submitting patches to the -stable tree:
- Send the patch, after verifying that it follows the above rules, to
- stable@kernel.org.
- - To have the patch automatically included in the stable tree, add the
- the tag
+ stable@kernel.org. You must note the upstream commit ID in the changelog
+ of your submission.
+ - To have the patch automatically included in the stable tree, add the tag
Cc: stable@kernel.org
in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author
cpu_relax();
The cpu_relax() call can lower CPU power consumption or yield to a
-hyperthreaded twin processor; it also happens to serve as a memory barrier,
-so, once again, volatile is unnecessary. Of course, busy-waiting is
-generally an anti-social act to begin with.
+hyperthreaded twin processor; it also happens to serve as a compiler
+barrier, so, once again, volatile is unnecessary. Of course, busy-
+waiting is generally an anti-social act to begin with.
There are still a few rare situations where volatile makes sense in the
kernel:
ret = -1;
break;
}
- ret = fsync(fd);
- if (ret)
- break;
sleep(10);
}
close(fd);
*/
int main(int argc, char *argv[])
{
+ int flags;
+
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
if (argc > 1) {
if (!strncasecmp(argv[1], "-d", 2)) {
- ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD);
+ flags = WDIOS_DISABLECARD;
+ ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card disabled.\n");
fflush(stderr);
exit(0);
} else if (!strncasecmp(argv[1], "-e", 2)) {
- ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD);
+ flags = WDIOS_ENABLECARD;
+ ioctl(fd, WDIOC_SETOPTIONS, &flags);
fprintf(stderr, "Watchdog card enabled.\n");
fflush(stderr);
exit(0);
ioctl(fd, WDIOC_GETTEMP, &temperature);
Finally the SETOPTIONS ioctl can be used to control some aspects of
-the cards operation; right now the pcwd driver is the only one
-supporting this ioctl.
+the cards operation.
int options = 0;
- ioctl(fd, WDIOC_SETOPTIONS, options);
+ ioctl(fd, WDIOC_SETOPTIONS, &options);
The following options are available:
F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
-M: Nicolas Boichat <nicolas@boichat.ch>
-L: mactel-linux-devel@lists.sourceforge.net
+M: Henrik Rydberg <rydberg@euromail.se>
+L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/applesmc.c
S: Maintained
ARM/NOMADIK ARCHITECTURE
-M: Alessandro Rubini <rubini@unipv.it>
-M: STEricsson <STEricsson_nomadik_linux@list.st.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-nomadik/
-F: arch/arm/plat-nomadik/
+M: Alessandro Rubini <rubini@unipv.it>
+M: STEricsson <STEricsson_nomadik_linux@list.st.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-nomadik/
+F: arch/arm/plat-nomadik/
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
W: http://www.mcuos.com
S: Maintained
+ARM/U300 MACHINE SUPPORT
+M: Linus Walleij <linus.walleij@stericsson.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: arch/arm/mach-u300/
+F: drivers/i2c/busses/i2c-stu300.c
+F: drivers/rtc/rtc-coh901331.c
+F: drivers/watchdog/coh901327_wdt.c
+F: drivers/dma/coh901318*
+
ARM/U8500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
CEPH DISTRIBUTED FILE SYSTEM CLIENT
M: Sage Weil <sage@newdream.net>
-L: ceph-devel@lists.sourceforge.net
+L: ceph-devel@vger.kernel.org
W: http://ceph.newdream.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git
S: Supported
F: drivers/scsi/dpt/
DRBD DRIVER
-P: Philipp Reisner
-P: Lars Ellenberg
-M: drbd-dev@lists.linbit.com
-L: drbd-user@lists.linbit.com
-W: http://www.drbd.org
-T: git git://git.drbd.org/linux-2.6-drbd.git drbd
-T: git git://git.drbd.org/drbd-8.3.git
-S: Supported
-F: drivers/block/drbd/
-F: lib/lru_cache.c
-F: Documentation/blockdev/drbd/
+P: Philipp Reisner
+P: Lars Ellenberg
+M: drbd-dev@lists.linbit.com
+L: drbd-user@lists.linbit.com
+W: http://www.drbd.org
+T: git git://git.drbd.org/linux-2.6-drbd.git drbd
+T: git git://git.drbd.org/drbd-8.3.git
+S: Supported
+F: drivers/block/drbd/
+F: lib/lru_cache.c
+F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
DRM DRIVERS
M: David Airlie <airlied@linux.ie>
-L: dri-devel@lists.sourceforge.net
+L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/gpu/drm/
S: Odd Fixes
F: drivers/char/hvc_*
-VIRTIO CONSOLE DRIVER
-M: Amit Shah <amit.shah@redhat.com>
-L: virtualization@lists.linux-foundation.org
-S: Maintained
-F: drivers/char/virtio_console.c
-
iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER
M: Peter Jones <pjones@redhat.com>
M: Konrad Rzeszutek Wilk <konrad@kernel.org>
ISDN SUBSYSTEM
M: Karsten Keil <isdn@linux-pingi.de>
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
+L: netdev@vger.kernel.org
W: http://www.isdn4linux.de
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
S: Maintained
F: include/linux/kexec.h
F: kernel/kexec.c
+KEYS/KEYRINGS:
+M: David Howells <dhowells@redhat.com>
+L: keyrings@linux-nfs.org
+S: Maintained
+F: Documentation/keys.txt
+F: include/linux/key.h
+F: include/linux/key-type.h
+F: include/keys/
+F: security/keys/
+
KGDB
M: Jason Wessel <jason.wessel@windriver.com>
L: kgdb-bugreport@lists.sourceforge.net
LTP (Linux Test Project)
M: Rishikesh K Rajak <risrajak@linux.vnet.ibm.com>
M: Garrett Cooper <yanegomi@gmail.com>
-M: Mike Frysinger <vapier@gentoo.org>
-M: Subrata Modak <subrata@linux.vnet.ibm.com>
+M: Mike Frysinger <vapier@gentoo.org>
+M: Subrata Modak <subrata@linux.vnet.ibm.com>
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
-M: Geoff Levand <geoffrey.levand@am.sony.com>
+M: Geoff Levand <geoff@infradead.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
-S: Supported
+S: Maintained
F: arch/powerpc/boot/ps3*
F: arch/powerpc/include/asm/lv1call.h
F: arch/powerpc/include/asm/ps3*.h
S390 ZFCP DRIVER
M: Christof Schmitt <christof.schmitt@de.ibm.com>
-M: Martin Peschke <mp3@de.ibm.com>
+M: Swen Schillig <swen@vnet.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
-F: Documentation/s390/zfcpdump.txt
F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER
F: sound/soc/codecs/twl4030*
TIPC NETWORK LAYER
-M: Per Liden <per.liden@ericsson.com>
M: Jon Maloy <jon.maloy@ericsson.com>
M: Allan Stephens <allan.stephens@windriver.com>
L: tipc-discussion@lists.sourceforge.net
F: Documentation/filesystems/vfat.txt
F: fs/fat/
+VIRTIO CONSOLE DRIVER
+M: Amit Shah <amit.shah@redhat.com>
+L: virtualization@lists.linux-foundation.org
+S: Maintained
+F: drivers/char/virtio_console.c
+F: include/linux/virtio_console.h
+
VIRTIO HOST (VHOST)
M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
X86 PLATFORM DRIVERS
M: Matthew Garrett <mjg@redhat.com>
L: platform-driver-x86@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
S: Maintained
F: drivers/platform/x86
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
-EXTRAVERSION = -rc2
-NAME = Man-Eating Seals of Antiquity
+EXTRAVERSION = -rc7
+NAME = Sheep on Meth
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
* based significantly on the arch/alpha/boot/main.c of Linus Torvalds
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>
* and the decompression code from MILO.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>
* This file is the bootloader for the Linux/AXP kernel
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <generated/utsrelease.h>
#include <linux/mm.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/syscalls.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/uio.h>
#include <linux/vfs.h>
#include <linux/rcupdate.h>
+#include <linux/slab.h>
#include <asm/fpu.h>
#include <asm/io.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <linux/capability.h>
#include <linux/mm.h>
#include <linux/errno.h>
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/pci.h>
static int hose_mmap_page_range(struct pci_controller *hose,
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/pci.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/bootmem.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/time.h>
#include <linux/major.h>
#include <linux/reboot.h>
#include <linux/tty.h>
#include <linux/console.h>
+#include <linux/slab.h>
#include <asm/reg.h>
#include <asm/uaccess.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
-#include <linux/slab.h>
#include <linux/security.h>
#include <linux/signal.h>
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/bootmem.h> /* max_low_pfn */
#include <linux/vmalloc.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.
adr r0, LC0
ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp})
THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} )
- THUMB( ldr sp, [r0, #28] )
+ THUMB( ldr sp, [r0, #32] )
subs r0, r0, r1 @ calculate the delta offset
@ if delta is zero, we are
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
+ .word 0x56056900
+ .word 0xffffff00 @ PXA9xx
W(b) __armv4_mmu_cache_on
W(b) __armv4_mmu_cache_off
W(b) __armv4_mmu_cache_flush
W(b) __armv4_mmu_cache_off
W(b) __armv5tej_mmu_cache_flush
- .word 0x56056930
- .word 0xff0ffff0 @ PXA935
- W(b) __armv4_mmu_cache_on
- W(b) __armv4_mmu_cache_off
- W(b) __armv4_mmu_cache_flush
-
.word 0x56050000 @ Feroceon
.word 0xff0f0000
W(b) __armv4_mmu_cache_on
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
- locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
+ locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
/* Longtime timer */
locomo_writel(0, lchip->base + LOCOMO_LTINT);
/* SPI */
- locomo_writel(0, lchip->base + LOCOMO_SPIIE);
+ locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
r = locomo_readl(lchip->base + LOCOMO_ASD);
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
- return;
+ goto out;
}
/* Send Sub address (LSB is channel select) */
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
- return;
+ goto out;
}
/* Send DAC data */
udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */
if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */
printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
- return;
}
+out:
/* stop */
r = locomo_readl(mapbase + LOCOMO_DAC);
r &= ~(LOCOMO_DAC_SCLOEB);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Fri Jul 17 12:07:28 2009
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 12:01:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_FPGA11107 is not set
CONFIG_ARCH_BCM11107=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
-# Sat Feb 13 21:48:53 2010
+# Linux kernel version: 2.6.34-rc2
+# Thu Apr 8 14:49:08 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
CONFIG_ARCH_PXA=y
# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
#
# Intel PXA2xx/PXA3xx Implementations
# CONFIG_MACH_EM_X270 is not set
# CONFIG_MACH_EXEDA is not set
# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
# CONFIG_ARCH_GUMSTIX is not set
CONFIG_MACH_INTELMOTE2=y
# CONFIG_MACH_STARGATE2 is not set
# CONFIG_PXA_EZX is not set
# CONFIG_MACH_MP900C is not set
# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
# CONFIG_ARCH_PXA_ESERIES is not set
CONFIG_PXA27x=y
CONFIG_PXA_SSP=y
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_IWMMXT=y
CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
CONFIG_COMMON_CLKDEV=y
#
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
#
# CPU Power Management
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=y
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_LED=m
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
+# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
#
# User Modules And Translation Layers
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_PXA_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_I2C_PXA=y
# CONFIG_I2C_PXA_SLAVE is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TC6393XB is not set
CONFIG_PMIC_DA903X=y
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
CONFIG_VIDEO_PXA27x=y
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
#
# Special HID drivers
#
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
#
CONFIG_MMC_PXA=y
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_REGULATOR is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
#
# CD-ROM/DVD Filesystems
#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
#define USER(x...) \
9999: x; \
- .section __ex_table,"a"; \
+ .pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,9001f; \
- .previous
+ .popsection
/*
* SMP data memory barrier
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
.error "Unsupported inc macro argument"
.endif
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
- .previous
+ .popsection
.endr
.endm
#include <asm/glue.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
+#include <asm/outercache.h>
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
void (*dma_flush_range)(const void *, const void *);
};
-struct outer_cache_fns {
- void (*inv_range)(unsigned long, unsigned long);
- void (*clean_range)(unsigned long, unsigned long);
- void (*flush_range)(unsigned long, unsigned long);
-};
-
/*
* Select the calling method
*/
#endif
-#ifdef CONFIG_OUTER_CACHE
-
-extern struct outer_cache_fns outer_cache;
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{
- if (outer_cache.inv_range)
- outer_cache.inv_range(start, end);
-}
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{
- if (outer_cache.clean_range)
- outer_cache.clean_range(start, end);
-}
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{
- if (outer_cache.flush_range)
- outer_cache.flush_range(start, end);
-}
-
-#else
-
-static inline void outer_inv_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_clean_range(unsigned long start, unsigned long end)
-{ }
-static inline void outer_flush_range(unsigned long start, unsigned long end)
-{ }
-
-#endif
-
/*
* Copy user data from/to a page which is mapped into a different
* processes address space. Really, we want to allow our "user
#define __ASM_CLKDEV_H
struct clk;
+struct device;
struct clk_lookup {
struct list_head node;
#include <asm/ptrace.h>
#include <asm/user.h>
+struct task_struct;
+
typedef unsigned long elf_greg_t;
typedef unsigned long elf_freg_t[3];
"2: strt %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
- " .section __ex_table,\"a\"\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4f, 2b, 4f\n" \
- " .previous\n" \
- " .section .fixup,\"ax\"\n" \
+ " .popsection\n" \
+ " .pushsection .fixup,\"ax\"\n" \
"4: mov %0, %4\n" \
" b 3b\n" \
- " .previous" \
+ " .popsection" \
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
" it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
- " .section __ex_table,\"a\"\n"
+ " .pushsection __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 4f, 2b, 4f\n"
- " .previous\n"
- " .section .fixup,\"ax\"\n"
+ " .popsection\n"
+ " .pushsection .fixup,\"ax\"\n"
"4: mov %0, %4\n"
" b 3b\n"
- " .previous"
+ " .popsection"
: "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
: "cc", "memory");
#define kmap_prot PAGE_KERNEL
-#define flush_cache_kmaps() flush_cache_all()
+#define flush_cache_kmaps() \
+ do { \
+ if (cache_is_vivt()) \
+ flush_cache_all(); \
+ } while (0)
extern pte_t *pkmap_page_table;
extern void *kmap_high_get(struct page *page);
extern void kunmap_high(struct page *page);
+extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
+extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
+
+/*
+ * The following functions are already defined by <linux/highmem.h>
+ * when CONFIG_HIGHMEM is not set.
+ */
+#ifdef CONFIG_HIGHMEM
extern void *kmap(struct page *page);
extern void kunmap(struct page *page);
extern void *kmap_atomic(struct page *page, enum km_type type);
extern void kunmap_atomic(void *kvaddr, enum km_type type);
extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
extern struct page *kmap_atomic_to_page(const void *ptr);
+#endif
#endif
#ifndef __ASSEMBLY__
struct irqaction;
+struct pt_regs;
extern void migrate_irqs(void);
extern void asm_do_IRQ(unsigned int, struct pt_regs *);
KM_IRQ1,
KM_SOFTIRQ0,
KM_SOFTIRQ1,
+ KM_L1_CACHE,
KM_L2_CACHE,
KM_TYPE_NR
};
--- /dev/null
+/*
+ * arch/arm/include/asm/outercache.h
+ *
+ * Copyright (C) 2010 ARM Ltd.
+ * Written by Catalin Marinas <catalin.marinas@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_OUTERCACHE_H
+#define __ASM_OUTERCACHE_H
+
+struct outer_cache_fns {
+ void (*inv_range)(unsigned long, unsigned long);
+ void (*clean_range)(unsigned long, unsigned long);
+ void (*flush_range)(unsigned long, unsigned long);
+#ifdef CONFIG_OUTER_CACHE_SYNC
+ void (*sync)(void);
+#endif
+};
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.inv_range)
+ outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.clean_range)
+ outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.flush_range)
+ outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE_SYNC
+static inline void outer_sync(void)
+{
+ if (outer_cache.sync)
+ outer_cache.sync();
+}
+#else
+static inline void outer_sync(void)
+{ }
+#endif
+
+#endif /* __ASM_OUTERCACHE_H */
#include <linux/linkage.h>
#include <linux/irqflags.h>
+#include <asm/outercache.h>
+
#define __exception __attribute__((section(".exception.text")))
struct thread_info;
#define dmb() __asm__ __volatile__ ("" : : : "memory")
#endif
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
-#define mb() dmb()
+#ifdef CONFIG_ARCH_HAS_BARRIERS
+#include <mach/barriers.h>
+#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb() do { dsb(); outer_sync(); } while (0)
#define rmb() dmb()
-#define wmb() dmb()
+#define wmb() mb()
#else
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define smp_rmb() barrier()
#define smp_wmb() barrier()
#else
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
+#define smp_mb() dmb()
+#define smp_rmb() dmb()
+#define smp_wmb() dmb()
#endif
#define read_barrier_depends() do { } while(0)
__asm__ __volatile__( \
"1: ldrbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: ldrt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: strbt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
__asm__ __volatile__( \
"1: strt %1,[%2]\n" \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, %3\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous" \
+ " .popsection" \
: "+r" (err), "+r" (__pu_addr) \
: "r" (x), "i" (-EFAULT) \
: "cc")
#endif /* CONFIG_IWMMXT */
#ifdef CONFIG_VFP
-#if __LINUX_ARM_ARCH__ < 6
-/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra
- * word after the registers, and a word of padding at the end for
- * alignment. */
#define VFP_MAGIC 0x56465001
-#define VFP_STORAGE_SIZE 152
-#else
-#define VFP_MAGIC 0x56465002
-#define VFP_STORAGE_SIZE 144
-#endif
struct vfp_sigframe
{
unsigned long magic;
unsigned long size;
- union vfp_state storage;
-};
+ struct user_vfp ufp;
+ struct user_vfp_exc ufp_exc;
+} __attribute__((__aligned__(8)));
+
+/*
+ * 8 byte for magic and size, 264 byte for ufp, 12 bytes for ufp_exc,
+ * 4 bytes padding.
+ */
+#define VFP_STORAGE_SIZE sizeof(struct vfp_sigframe)
+
#endif /* CONFIG_VFP */
/*
#ifdef CONFIG_IWMMXT
struct iwmmxt_sigframe iwmmxt;
#endif
-#if 0 && defined CONFIG_VFP /* Not yet saved. */
+#ifdef CONFIG_VFP
struct vfp_sigframe vfp;
#endif
/* Something that isn't a valid magic number for any coprocessor. */
/*
* User specific VFP registers. If only VFPv2 is present, registers 16 to 31
- * are ignored by the ptrace system call.
+ * are ignored by the ptrace system call and the signal handler.
*/
struct user_vfp {
unsigned long long fpregs[32];
unsigned long fpscr;
};
+/*
+ * VFP exception registers exposed to user space during signal delivery.
+ * Fields not relavant to the current VFP architecture are ignored.
+ */
+struct user_vfp_exc {
+ unsigned long fpexc;
+ unsigned long fpinst;
+ unsigned long fpinst2;
+};
+
#endif /* _ARM_USER_H */
/*
* The out of line fixup for the ldrt above.
*/
- .section .fixup, "ax"
+ .pushsection .fixup, "ax"
4: mov pc, r9
- .previous
- .section __ex_table,"a"
+ .popsection
+ .pushsection __ex_table,"a"
.long 1b, 4b
#if __LINUX_ARM_ARCH__ >= 7
.long 2b, 4b
.long 3b, 4b
#endif
- .previous
+ .popsection
/*
* Check whether the instruction is a co-processor instruction.
* lr = unrecognised FP instruction return address
*/
- .data
+ .pushsection .data
ENTRY(fp_enter)
.word no_fp
- .previous
+ .popsection
ENTRY(no_fp)
mov pc, lr
" movne %0, #2 \n"
"3:\n"
- ".section .fixup, \"ax\"\n"
+ ".pushsection .fixup, \"ax\"\n"
"4: mov %0, #1 \n"
" b 3b \n"
- ".previous\n"
+ ".popsection\n"
- ".section __ex_table, \"a\"\n"
+ ".pushsection __ex_table, \"a\"\n"
" .long 1b, 4b \n"
" .long 2b, 4b \n"
- ".previous\n"
+ ".popsection\n"
: "=r"(err), "=r"(replaced)
: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
/*
* Setup an empty pt_regs. Fill SP and PC fields as
* they're needed by longjmp_break_handler.
+ *
+ * We allocate some slack between the original SP and start of
+ * our fabricated regs. To be precise we want to have worst case
+ * covered which is STMFD with all 16 regs so we allocate 2 *
+ * sizeof(struct_pt_regs)).
+ *
+ * This is to prevent any simulated instruction from writing
+ * over the regs when they are accessing the stack.
*/
"sub sp, %0, %1 \n\t"
"ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
"ldmia sp, {r0 - pc} \n\t"
:
: "r" (kcb->jprobe_saved_regs.ARM_sp),
- "I" (sizeof(struct pt_regs)),
+ "I" (sizeof(struct pt_regs) * 2),
"J" (offsetof(struct pt_regs, ARM_sp)),
"J" (offsetof(struct pt_regs, ARM_pc)),
"J" (offsetof(struct pt_regs, ARM_cpsr))
#include <linux/mm.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/string.h>
+#include <linux/gfp.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/delay.h>
#include <linux/reboot.h>
* the thread function, and r3 points to the exit function.
*/
extern void kernel_thread_helper(void);
-asm( ".section .text\n"
+asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_helper, #function\n"
"kernel_thread_helper:\n"
" mov lr, r3\n"
" mov pc, r2\n"
" .size kernel_thread_helper, . - kernel_thread_helper\n"
-" .previous");
+" .popsection");
#ifdef CONFIG_ARM_UNWIND
extern void kernel_thread_exit(long code);
-asm( ".section .text\n"
+asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_exit, #function\n"
"kernel_thread_exit:\n"
" nop\n"
" .fnend\n"
" .size kernel_thread_exit, . - kernel_thread_exit\n"
-" .previous");
+" .popsection");
#else
#define kernel_thread_exit do_exit
#endif
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
#include <asm/unistd.h>
+#include <asm/vfp.h>
#include "ptrace.h"
#include "signal.h"
#endif
+#ifdef CONFIG_VFP
+
+static int preserve_vfp_context(struct vfp_sigframe __user *frame)
+{
+ struct thread_info *thread = current_thread_info();
+ struct vfp_hard_struct *h = &thread->vfpstate.hard;
+ const unsigned long magic = VFP_MAGIC;
+ const unsigned long size = VFP_STORAGE_SIZE;
+ int err = 0;
+
+ vfp_sync_hwstate(thread);
+ __put_user_error(magic, &frame->magic, err);
+ __put_user_error(size, &frame->size, err);
+
+ /*
+ * Copy the floating point registers. There can be unused
+ * registers see asm/hwcap.h for details.
+ */
+ err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
+ sizeof(h->fpregs));
+ /*
+ * Copy the status and control register.
+ */
+ __put_user_error(h->fpscr, &frame->ufp.fpscr, err);
+
+ /*
+ * Copy the exception registers.
+ */
+ __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
+ __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
+ __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+
+ return err ? -EFAULT : 0;
+}
+
+static int restore_vfp_context(struct vfp_sigframe __user *frame)
+{
+ struct thread_info *thread = current_thread_info();
+ struct vfp_hard_struct *h = &thread->vfpstate.hard;
+ unsigned long magic;
+ unsigned long size;
+ unsigned long fpexc;
+ int err = 0;
+
+ __get_user_error(magic, &frame->magic, err);
+ __get_user_error(size, &frame->size, err);
+
+ if (err)
+ return -EFAULT;
+ if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
+ return -EINVAL;
+
+ /*
+ * Copy the floating point registers. There can be unused
+ * registers see asm/hwcap.h for details.
+ */
+ err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
+ sizeof(h->fpregs));
+ /*
+ * Copy the status and control register.
+ */
+ __get_user_error(h->fpscr, &frame->ufp.fpscr, err);
+
+ /*
+ * Sanitise and restore the exception registers.
+ */
+ __get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
+ /* Ensure the VFP is enabled. */
+ fpexc |= FPEXC_EN;
+ /* Ensure FPINST2 is invalid and the exception flag is cleared. */
+ fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+ h->fpexc = fpexc;
+
+ __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
+ __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+
+ if (!err)
+ vfp_flush_hwstate(thread);
+
+ return err ? -EFAULT : 0;
+}
+
+#endif
+
/*
* Do a signal return; undo the signal stack. These are aligned to 64-bit.
*/
err |= restore_iwmmxt_context(&aux->iwmmxt);
#endif
#ifdef CONFIG_VFP
-// if (err == 0)
-// err |= vfp_restore_state(&sf->aux.vfp);
+ if (err == 0)
+ err |= restore_vfp_context(&aux->vfp);
#endif
return err;
err |= preserve_iwmmxt_context(&aux->iwmmxt);
#endif
#ifdef CONFIG_VFP
-// if (err == 0)
-// err |= vfp_save_state(&sf->aux.vfp);
+ if (err == 0)
+ err |= preserve_vfp_context(&aux->vfp);
#endif
__put_user_error(0, &aux->end_magic, err);
return PTR_ERR(idle);
}
ci->idle = idle;
+ } else {
+ /*
+ * Since this idle thread is being re-used, call
+ * init_idle() to reinitialize the thread structure.
+ */
+ init_idle(idle, cpu);
}
/*
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/file.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
/* Fork a new task - this creates a new program thread.
* This is called indirectly via a small wrapper
ENDPROC(__backtrace)
ENDPROC(c_backtrace)
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long 1001b, 1006b
.long 1002b, 1006b
.long 1003b, 1006b
.long 1004b, 1006b
- .previous
+ .popsection
#define instr r4
#define reg r5
ldmfd sp!, {r1, pc}
ENDPROC(__clear_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, pc}
- .previous
+ .popsection
ENDPROC(__copy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2}
bl __memzero
ldr r0, [sp], #4
copy_abort_end
- .previous
+ .popsection
ENDPROC(__copy_to_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2, r3}
sub r0, r0, r1
rsb r0, r0, r2
copy_abort_end
- .previous
+ .popsection
* so properly, we would have to add in whatever registers were loaded before
* the fault, which, with the current asm above is not predictable.
*/
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 4
9001: mov r4, #-EFAULT
ldr r5, [fp, #4] @ *err_ptr
strneb r0, [r1], #1
bne 9002b
load_regs
- .previous
+ .popsection
mov pc, lr
ENDPROC(__get_user_bad)
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
.long 1b, __get_user_bad
.long 2b, __get_user_bad
.long 3b, __get_user_bad
.long 4b, __get_user_bad
-.previous
+.popsection
rsb ip, ip, #32
addne pc, pc, ip @ C is always clear here
b 7f
-6: nop
+6: W(nop)
W(ldr) r3, [r1, #-4]!
W(ldr) r4, [r1, #-4]!
W(ldr) r5, [r1, #-4]!
add pc, pc, ip
nop
- nop
+ W(nop)
W(str) r3, [r0, #-4]!
W(str) r4, [r0, #-4]!
W(str) r5, [r0, #-4]!
mov pc, lr
ENDPROC(__put_user_bad)
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
.long 1b, __put_user_bad
.long 2b, __put_user_bad
.long 3b, __put_user_bad
.long 4b, __put_user_bad
.long 5b, __put_user_bad
.long 6b, __put_user_bad
-.previous
+.popsection
mov pc, lr
ENDPROC(__strncpy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: mov r3, #0
strb r3, [r0, #0] @ null terminate
mov r0, #-EFAULT
mov pc, lr
- .previous
+ .popsection
mov pc, lr
ENDPROC(__strnlen_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: mov r0, #0
mov pc, lr
- .previous
+ .popsection
b .Lc2u_finished
ENDPROC(__copy_to_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, r4 - r7, pc}
- .previous
+ .popsection
/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
* Purpose : copy a block from user memory to kernel memory
b .Lcfu_finished
ENDPROC(__copy_from_user)
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 0
/*
* We took an exception. r0 contains a pointer to
blne __memzero
mov r0, r4
ldmfd sp!, {r4 - r7, pc}
- .previous
+ .popsection
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/hardirq.h> /* for in_atomic() */
+#include <linux/gfp.h>
#include <asm/current.h>
#include <asm/page.h>
#include <linux/timex.h>
#include <linux/signal.h>
#include <linux/clk.h>
+#include <linux/gfp.h>
#include <mach/hardware.h>
#include <asm/irq.h>
obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
- obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
orr r3, r3, #(1 << 29) /* bit 29 always set */
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
- wait_pllalock
-
/* Save PLLB setting and disable it */
ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
str r3, .saved_pllbr
mov r3, #AT91_PMC_PLLCOUNT
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
- wait_pllblock
-
/* Turn off the main oscillator */
ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
bic r3, r3, #AT91_PMC_MOSCEN
ldr r3, .saved_pllbr
str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+ tst r3, #(AT91_PMC_MUL & 0xff0000)
+ bne 1f
+ tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ beq 2f
+1:
wait_pllblock
+2:
/* Restore PLLA setting */
ldr r3, .saved_pllar
str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+ tst r3, #(AT91_PMC_MUL & 0xff0000)
+ bne 3f
+ tst r3, #(AT91_PMC_MUL & ~0xff0000)
+ beq 4f
+3:
wait_pllalock
+4:
#ifdef SLOWDOWN_MASTER_CLOCK
/*
#include <linux/interrupt.h>
#include <linux/irqreturn.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <mach/timer.h>
int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
int dirtied /* non-zero if any of the pages were modified */
) {
+
+ int rc = 0;
int regionIdx;
int segmentIdx;
DMA_Region_t *region;
DMA_Segment_t *segment;
+ down(&memMap->lock);
+
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
printk(KERN_ERR
"%s: vmalloc'd pages are not yet supported\n",
__func__);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
case DMA_MEM_TYPE_KMALLOC:
printk(KERN_ERR
"%s: Unsupported memory type: %d\n",
__func__, region->memType);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
}
memMap->numRegionsUsed = 0;
memMap->inUse = 0;
+out:
up(&memMap->lock);
- return 0;
+ return rc;
}
EXPORT_SYMBOL(dma_unmap);
#include <linux/leds.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
#include <linux/mtd/nand.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
[IRQ_MMCINT] = 7,
[IRQ_DM365_MMCINT1] = 7,
[IRQ_DM365_PWMINT3] = 7,
- [IRQ_DDRINT] = 4,
[IRQ_AEMIFINT] = 2,
[IRQ_DM365_SDIOINT1] = 2,
[IRQ_TINT0_TINT12] = 7,
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/edma.h>
/* EDMA channel with event association */
pr_debug("EDMA: ER%d %08x\n", j,
edma_shadow0_read_array(ctlr, SH_ER, j));
- /* Clear any pending error */
+ /* Clear any pending event or error */
+ edma_write_array(ctlr, EDMA_ECR, j, mask);
edma_write_array(ctlr, EDMA_EMCR, j, mask);
/* Clear any SER */
edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
*
* Author: Mark A. Greer <mgreer@mvista.com>
*
- * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
#include <video/da8xx-fb.h>
+#include <linux/platform_device.h>
#include <linux/davinci_emac.h>
+
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
extern const short da850_nand_pins[];
extern const short da850_nor_pins[];
+#ifdef CONFIG_DAVINCI_MUX
int da8xx_pinmux_setup(const short pins[]);
+#else
+static inline int da8xx_pinmux_setup(const short pins[]) { return 0; }
+#endif
#endif /* __ASM_ARCH_DAVINCI_DA8XX_H */
irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
setup_irq(irq, &t->irqaction);
}
-
- timer32_config(&timers[i]);
}
}
unsigned int clocksource_id;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
+ int i;
clockevent_id = soc_info->timer_info->clockevent_id;
clocksource_id = soc_info->timer_info->clocksource_id;
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
+
+ for (i=0; i< ARRAY_SIZE(timers); i++)
+ timer32_config(&timers[i]);
}
struct sys_timer davinci_timer = {
#include <mach/hardware.h>
/*************************************************************************
- * GPIO handling for EP93xx
+ * Interrupt handling for EP93xx on-chip GPIOs
*************************************************************************/
static unsigned char gpio_int_unmasked[3];
static unsigned char gpio_int_enabled[3];
static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
-void ep93xx_gpio_update_int_params(unsigned port)
+static void ep93xx_gpio_update_int_params(unsigned port)
{
BUG_ON(port > 2);
EP93XX_GPIO_REG(int_en_register_offset[port]));
}
-void ep93xx_gpio_int_mask(unsigned line)
+static inline void ep93xx_gpio_int_mask(unsigned line)
{
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
*/
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/cpufreq.h>
-#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
*/
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <asm/irq.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/pci.h>
#include <linux/pm.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/mtd/physmap.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
*/
#define PHYS_OFFSET (0x00000000)
-#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
#include <linux/i2c-gpio.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
#include <linux/i2c-gpio.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <mach/npe.h>
#define DEBUG_MSG 0
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/setup.h>
.desc = "SWR Button",
.active_low = 1,
}, {
- .code = KEY_F1,
+ .code = KEY_WPS_BUTTON,
.gpio = 46,
- .desc = "WPS Button(F1)",
+ .desc = "WPS Button",
.active_low = 1,
},
};
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>
#define UART2_BASE (APB_PHYS_BASE + 0x17000)
#define UART3_BASE (APB_PHYS_BASE + 0x18000)
-static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+static volatile unsigned long *UART;
static inline void putc(char c)
{
static inline void arch_decomp_setup(void)
{
+ /* default to UART2 */
+ UART = (unsigned long *)UART2_BASE;
+
if (machine_is_avengers_lite())
UART = (unsigned long *)UART3_BASE;
}
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31_3DS_MXC_NAND_USE_BBT
+ bool "Make the MXC NAND driver use the in flash Bad Block Table"
+ depends on MACH_MX31_3DS
+ depends on MTD_NAND_MXC
+ help
+ Enable this if you want that the MXC NAND driver uses the in flash
+ Bad Block Table to know what blocks are bad instead of scanning the
+ entire flash looking for bad block markers.
+
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
+ select MXC_ULPI if USB_ULPI
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
}
DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
_REGISTER_CLOCK(NULL, "iim", iim_clk)
_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
- _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
};
int __init mx31_clocks_init(unsigned long fref)
.resource = imx_ssi_resources1,
};
-static int mx3_devices_init(void)
+static struct resource imx_wdt_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device imx_wdt_device0 = {
+ .name = "imx-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(imx_wdt_resources),
+ .resource = imx_wdt_resources,
+};
+
+static int __init mx3_devices_init(void)
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
+ imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
imx_ssi_resources0[1].end = MX35_INT_SSI1;
imx_ssi_resources1[1].start = MX35_INT_SSI2;
imx_ssi_resources1[1].end = MX35_INT_SSI2;
+ imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
+ imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
}
return 0;
extern struct platform_device mxc_spi_device2;
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
-
+extern struct platform_device imx_ssi_device1;
+extern struct platform_device imx_wdt_device0;
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
#include "devices.h"
#include "crm_regs.h"
/* I2C2 */
MX31_PIN_CSPI2_MOSI__SCL,
MX31_PIN_CSPI2_MISO__SDA,
+ /* OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+ /* USB host 2 */
+ IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+ IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
+/* USB */
+#if defined(CONFIG_USB_ULPI)
+
+#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
+#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
+#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbotg_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+ /* Chip already enabled by hardware */
+ /* OTG phy reset*/
+ err = gpio_request(OTG_RESET, "USB-OTG-RESET");
+ if (err) {
+ pr_err("Failed to request the usb otg reset gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
+ if (err) {
+ pr_err("Failed to reset the usb otg phy\n");
+ goto otg_free_reset;
+ }
+
+ gpio_set_value(OTG_RESET, 0/*LOW*/);
+ mdelay(5);
+ gpio_set_value(OTG_RESET, 1/*HIGH*/);
+
+ return 0;
+
+otg_free_reset:
+ gpio_free(OTG_RESET);
+ return err;
+}
+
+static int usbh2_init(struct platform_device *pdev)
+{
+ int err;
+
+ mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+ mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+
+ /* Enable the chip */
+ err = gpio_request(USBH2_CS, "USB-H2-CS");
+ if (err) {
+ pr_err("Failed to request the usb host 2 CS gpio\n");
+ return err;
+ }
+
+ err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
+ if (err) {
+ pr_err("Failed to drive the usb host 2 CS gpio\n");
+ goto h2_free_cs;
+ }
+
+ /* H2 phy reset*/
+ err = gpio_request(USBH2_RESET, "USB-H2-RESET");
+ if (err) {
+ pr_err("Failed to request the usb host 2 reset gpio\n");
+ goto h2_free_cs;
+ }
+
+ err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
+ if (err) {
+ pr_err("Failed to reset the usb host 2 phy\n");
+ goto h2_free_reset;
+ }
+
+ gpio_set_value(USBH2_RESET, 0/*LOW*/);
+ mdelay(5);
+ gpio_set_value(USBH2_RESET, 1/*HIGH*/);
+
+ return 0;
+
+h2_free_reset:
+ gpio_free(USBH2_RESET);
+h2_free_cs:
+ gpio_free(USBH2_CS);
+ return err;
+}
+
+static struct mxc_usbh_platform_data usbotg_pdata = {
+ .init = usbotg_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+ .init = usbh2_init,
+ .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+ .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif /* CONFIG_USB_ULPI */
+
/* RTC over I2C*/
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
if (armadillo5x0_i2c_rtc.irq == 0)
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
+
+ /* USB */
+#if defined(CONFIG_USB_ULPI)
+ usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+ usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+ USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+ mxc_register_device(&mxc_otg_host, &usbotg_pdata);
+ mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
}
static void __init armadillo5x0_timer_init(void)
#include <linux/gpio.h>
#include <linux/smsc911x.h>
#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <mach/common.h>
-#include <mach/board-mx31pdk.h>
+#include <mach/board-mx31_3ds.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
/*!
- * @file mx31pdk.c
+ * @file mx31_3ds.c
*
* @brief This file contains the board-specific initialization routines.
*
* @ingroup System
*/
-static int mx31pdk_pins[] = {
+static int mx31_3ds_pins[] = {
/* UART1 */
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
MX31_PIN_RXD1__RXD1,
IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+ /* SPI 1 */
+ MX31_PIN_CSPI2_SCLK__SCLK,
+ MX31_PIN_CSPI2_MOSI__MOSI,
+ MX31_PIN_CSPI2_MISO__MISO,
+ MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI2_SS0__SS0,
+ MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
+ /* MC13783 IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
+};
+
+/* Regulators */
+static struct regulator_init_data pwgtx_init = {
+ .constraints = {
+ .boot_on = 1,
+ .always_on = 1,
+ },
+};
+
+static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
+ {
+ .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
+ .init_data = &pwgtx_init,
+ }, {
+ .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
+ .init_data = &pwgtx_init,
+ },
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+ .regulators = mx31_3ds_regulators,
+ .num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
+ .flags = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi1_internal_chipselect[] = {
+ MXC_SPI_CS(0),
+ MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi1_pdata = {
+ .chipselect = spi1_internal_chipselect,
+ .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect),
+};
+
+static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 1, /* SS2 */
+ .platform_data = &mc13783_pdata,
+ .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+ .mode = SPI_CS_HIGH,
+ },
+};
+
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
+ .width = 1,
+ .hw_ecc = 1,
+#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT
+ .flash_bbt = 1,
+#endif
};
static struct imxuart_platform_data uart_pdata = {
* LEDs, switches, interrupts for Ethernet.
*/
-static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
+static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
uint32_t imr_val;
uint32_t int_valid;
.unmask = expio_unmask_irq,
};
-static int __init mx31pdk_init_expio(void)
+static int __init mx31_3ds_init_expio(void)
{
int i;
int ret;
return -ENODEV;
}
- pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n",
__raw_readw(CPLD_CODE_VER_REG));
/*
set_irq_flags(i, IRQF_VALID);
}
set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
- set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler);
return 0;
}
/*
* This structure defines the MX31 memory map.
*/
-static struct map_desc mx31pdk_io_desc[] __initdata = {
+static struct map_desc mx31_3ds_io_desc[] __initdata = {
{
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
/*
* Set up static virtual mappings.
*/
-static void __init mx31pdk_map_io(void)
+static void __init mx31_3ds_map_io(void)
{
mx31_map_io();
- iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+ iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc));
}
/*!
*/
static void __init mxc_board_init(void)
{
- mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
- "mx31pdk");
+ mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
+ "mx31_3ds");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata);
+
+ mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+ spi_register_board_info(mx31_3ds_spi_devs,
+ ARRAY_SIZE(mx31_3ds_spi_devs));
- if (!mx31pdk_init_expio())
+ if (!mx31_3ds_init_expio())
platform_device_register(&smsc911x_device);
}
-static void __init mx31pdk_timer_init(void)
+static void __init mx31_3ds_timer_init(void)
{
mx31_clocks_init(26000000);
}
-static struct sys_timer mx31pdk_timer = {
- .init = mx31pdk_timer_init,
+static struct sys_timer mx31_3ds_timer = {
+ .init = mx31_3ds_timer_init,
};
/*
* The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31PDK data structure.
+ * initialize __mach_desc_MX31_3DS data structure.
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
- .map_io = mx31pdk_map_io,
+ .map_io = mx31_3ds_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
- .timer = &mx31pdk_timer,
+ .timer = &mx31_3ds_timer,
MACHINE_END
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
+#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
+#include <linux/gfp.h>
#include <media/soc_camera.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/gpio.h>
-#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
platform_device_register(&litekit_led_device);
+ mxc_register_device(&imx_wdt_device0, NULL);
}
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/usb/otg.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/io.h>
#include <asm/clkdev.h>
+#include <asm/div64.h>
#include <mach/hardware.h>
#include <mach/common.h>
/* GPT */
DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
+ NULL, NULL, &ipg_clk, NULL);
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/module.h>
#include <mach/hardware.h>
#include <asm/io.h>
+static int cpu_silicon_rev = -1;
+
+#define SI_REV 0x48
+
+static void query_silicon_parameter(void)
+{
+ void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
+ u32 rev;
+
+ if (!rom) {
+ cpu_silicon_rev = -EINVAL;
+ return;
+ }
+
+ rev = readl(rom + SI_REV);
+ switch (rev) {
+ case 0x1:
+ cpu_silicon_rev = MX51_CHIP_REV_1_0;
+ break;
+ case 0x2:
+ cpu_silicon_rev = MX51_CHIP_REV_1_1;
+ break;
+ case 0x10:
+ cpu_silicon_rev = MX51_CHIP_REV_2_0;
+ break;
+ case 0x20:
+ cpu_silicon_rev = MX51_CHIP_REV_3_0;
+ break;
+ default:
+ cpu_silicon_rev = 0;
+ }
+
+ iounmap(rom);
+}
+
+/*
+ * Returns:
+ * the silicon revision of the cpu
+ * -EINVAL - not a mx51
+ */
+int mx51_revision(void)
+{
+ if (!cpu_is_mx51())
+ return -EINVAL;
+
+ if (cpu_silicon_rev == -1)
+ query_silicon_parameter();
+
+ return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx51_revision);
+
static int __init post_cpu_init(void)
{
unsigned int reg;
.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
.length = MX51_DEBUG_SIZE,
.type = MT_DEVICE
- }, {
- .virtual = MX51_TZIC_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
- .length = MX51_TZIC_SIZE,
- .type = MT_DEVICE
}, {
.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
.length = MX51_AIPS2_SIZE,
.type = MT_DEVICE
- }, {
- .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
- .length = MX51_NFC_AXI_SIZE,
- .type = MT_DEVICE
},
};
*/
void __init mx51_map_io(void)
{
- u32 tzic_addr;
-
- if (mx51_revision() < MX51_CHIP_REV_2_0)
- tzic_addr = 0x8FFFC000;
- else
- tzic_addr = 0xE0003000;
- mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr);
-
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
void __init mx51_init_irq(void)
{
- tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+ unsigned long tzic_addr;
+ void __iomem *tzic_virt;
+
+ if (mx51_revision() < MX51_CHIP_REV_2_0)
+ tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
+ else
+ tzic_addr = MX51_TZIC_BASE_ADDR;
+
+ tzic_virt = ioremap(tzic_addr, SZ_16K);
+ if (!tzic_virt)
+ panic("unable to map TZIC interrupt controller\n");
+
+ tzic_init_irq(tzic_virt);
}
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/err.h>
+#include <linux/gfp.h>
#include <asm/irq.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
*/
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <linux/slab.h>
#include <mach/regs-board-a9m9750dev.h>
#include <mach/board.h>
*/
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <mach/irqs.h>
#include <plat/dma.h>
* ---------------------------------------------------------------------------
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#else
-#error OMAP 32KHz timer does not currently work on 15XX!
-#endif
-
/* 16xx specific defines */
#define OMAP1_32K_TIMER_BASE 0xfffb9000
#define OMAP1_32K_TIMER_CR 0x08
.set_mode = omap_32k_timer_set_mode,
};
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
-{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
-}
-
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_32k_timer;
select OMAP_PACKAGE_CBB
config MACH_DEVKIT8000
- bool "DEVKIT8000 board"
- depends on ARCH_OMAP3
+ bool "DEVKIT8000 board"
+ depends on ARCH_OMAP3
+ select OMAP_PACKAGE_CUS
+ select OMAP_MUX
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+ omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();
static void __init am3517_evm_init(void)
{
- am3517_evm_i2c_init();
-
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+ am3517_evm_i2c_init();
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
-#include <linux/usb/otg.h>
#include <linux/dm9000.h>
#include <linux/interrupt.h>
devkit8000_vmmc1_supply.dev = mmc[0].dev;
devkit8000_vsim_supply.dev = mmc[0].dev;
- /* REVISIT: need ehci-omap hooks for external VBUS
- * power switch and overcurrent detect
- */
-
- gpio_request(gpio + 1, "EHCI_nOC");
- gpio_direction_input(gpio + 1);
-
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
- gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
-
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-
return 0;
}
.dev = &devkit8000_lcd_device.dev,
},
{
- .supply = "vdss_dsi",
+ .supply = "vdds_dsi",
.dev = &devkit8000_dss_device.dev,
}
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init devkit8000_init(void)
{
+ omap_serial_init();
+
+ omap_dm9000_init();
+
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
spi_register_board_info(devkit8000_spi_board_info,
ARRAY_SIZE(devkit8000_spi_board_info));
- omap_serial_init();
-
- omap_dm9000_init();
-
devkit8000_ads7846_init();
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
-
- gpio_request(170, "DVI_nPD");
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_direction_output(170, true);
-
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
devkit8000_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
- omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
- omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init devkit8000_map_io(void)
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
- .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
- .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL,
};
*/
#define N8X0_SLOT_SWITCH_GPIO 96
#define N810_EMMC_VSD_GPIO 23
-#define NN810_EMMC_VIO_GPIO 9
+#define N810_EMMC_VIO_GPIO 9
static int n8x0_mmc_switch_slot(struct device *dev, int slot)
{
if (power_on) {
gpio_set_value(N810_EMMC_VSD_GPIO, 1);
msleep(1);
- gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
+ gpio_set_value(N810_EMMC_VIO_GPIO, 1);
msleep(1);
} else {
- gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
+ gpio_set_value(N810_EMMC_VIO_GPIO, 0);
msleep(50);
gpio_set_value(N810_EMMC_VSD_GPIO, 0);
msleep(50);
if (machine_is_nokia_n810()) {
gpio_free(N810_EMMC_VSD_GPIO);
- gpio_free(NN810_EMMC_VIO_GPIO);
+ gpio_free(N810_EMMC_VIO_GPIO);
}
}
err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
if (err)
- return err;
+ return;
gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
- return err;
+ return;
}
gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
- err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
+ err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
gpio_free(N810_EMMC_VSD_GPIO);
- return err;
+ return;
}
- gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
+ gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
}
mmc_data[0] = &mmc1_data;
}
if (norcs > GPMC_CS_NUM)
- printk(KERN_INFO "OneNAND: Unable to find configuration "
- " in GPMC\n ");
+ printk(KERN_INFO "NOR: Unable to find configuration "
+ "in GPMC\n");
else
board_nor_init(sdp_partition_info[0], norcs);
if (onenandcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
- " in GPMC\n ");
+ "in GPMC\n");
else
board_onenand_init(sdp_partition_info[1], onenandcs);
if (nandcs > GPMC_CS_NUM)
printk(KERN_INFO "NAND: Unable to find configuration "
- " in GPMC\n ");
+ "in GPMC\n");
else
board_nand_init(sdp_partition_info[2], nandcs);
}
static struct platform_device zoom_debugboard_serial_device = {
.name = "serial8250",
- .id = 3,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
- omap_serial_init();
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#include <plat/clock.h>
#include <plat/sram.h>
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
- .enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
+ .enable_bit = OMAP3430_PWRDN_DSS1_SHIFT,
.flags = INVERT_ENABLE,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,
CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X),
- CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X),
+ CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X),
CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
else
bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
else
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
__ffs(clkdm->clktrctrl_mask));
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
- } else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
+ } else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
__ffs(clkdm->clktrctrl_mask));
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
- irq = OMAP44XX_IRQ_MMC4;
+ irq = OMAP44XX_IRQ_MMC5;
break;
default:
continue;
struct gpmc_timings t;
int err;
+ if (!gpmc_nand_data->gpmc_t)
+ return 0;
+
memset(&t, 0, sizeof(t));
t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000f0000 @ only check architecture
- cmp \tmp, #0x00060000 @ is v6?
+ cmp \tmp, #0x00070000 @ is v6?
beq 2400f @ found v6 so it's omap24xx
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/stringify.h>
#include <plat/iommu.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <mach/irqs.h>
#include <plat/dma.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/ctype.h>
ENTRY(omap_secondary_startup)
hold: ldr r12,=0x103
dsb
- smc @ read from AuxCoreBoot0
+ smc #0 @ read from AuxCoreBoot0
mov r0, r0, lsr #9
mrc p15, 0, r4, c0, c0, 5
and r4, r4, #0x0f
stmfd sp!, {r1-r12, lr}
ldr r12, =0x104
dsb
- smc
+ smc #0
ldmfd sp!, {r1-r12, pc}
END(omap_modify_auxcoreboot0)
stmfd sp!, {r2-r12, lr}
ldr r12, =0x105
dsb
- smc
+ smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_auxcoreboot_addr)
mov r12, r0
mov r0, r1
dsb
- smc
+ smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_smc1)
c = oh->slaves[oh->_mpu_port_index]->_clk;
}
+ if (!c->clkdm)
+ return NULL;
+
return c->clkdm->pwrdm.ptr;
}
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <plat/clock.h>
#include <plat/board.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
{
struct powerdomain **p = NULL;
- if (cpu_is_omap24xx() | cpu_is_omap34xx()) {
+ if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
pwrstst_reg_offs = OMAP2_PM_PWSTST;
} else if (cpu_is_omap44xx()) {
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
- if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
if (cpu_is_omap44xx())
return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
else
WARN_ON(1);
- if (cpu_is_omap24xx() | cpu_is_omap34xx())
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
OMAP2_RM_RSTCTRL);
if (cpu_is_omap44xx())
}
};
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
}
};
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
- serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
-}
-#else
-static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
-{
-}
-#endif
-
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
- if (cpu_is_omap3630() || cpu_is_omap44xx())
- omap2_set_globals_uart4(omap2_globals);
+ serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
static inline unsigned int __serial_read_reg(struct uart_port *up,
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
- printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ dev_err(dev, "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
+ /* Don't map zero-based physical address */
+ if (p->mapbase == 0) {
+ dev_warn(dev, "no physical address for uart#%d,"
+ " so skipping early_init...\n", i);
+ continue;
+ }
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
- printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+ dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
- printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
+ dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
- printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
+ dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
pdev = &uart->pdev;
dev = &pdev->dev;
+ /* Don't proceed if there's no clocks available */
+ if (unlikely(!uart->ick || !uart->fck)) {
+ WARN(1, "%s: can't init uart%d, no clocks available\n",
+ kobject_name(&dev->kobj), port);
+ return;
+ }
+
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/mbus.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
.desc = "Reset Button",
.active_low = 1,
}, {
- .code = KEY_WLAN,
+ .code = KEY_WPS_BUTTON,
.gpio = 2,
.desc = "WPS Button",
.active_low = 1,
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
config MACH_HIMALAYA
bool "HTC Himalaya Support"
select CPU_PXA26x
- select FB_W100
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
config SHARPSL_PM
bool
select APM_EMULATION
+ select SHARPSL_PM_MAX1111
+
+config SHARPSL_PM_MAX1111
+ bool
+ depends on !CORGI_SSP_DEPRECATED
+ select HWMON
+ select SENSORS_MAX1111
config CORGI_SSP_DEPRECATED
bool
bool "Toshiba e740"
default y
depends on ARCH_PXA_ESERIES
- select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e740 family PDA.
bool "Toshiba e750"
default y
depends on ARCH_PXA_ESERIES
- select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e750 family PDA.
bool "Toshiba e800"
default y
depends on ARCH_PXA_ESERIES
- select FB_W100
help
Say Y here if you intend to run this kernel on a Toshiba
e800 family PDA.
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#include <mach/pxa3xx-regs.h>
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- /* SPI chip select directions - all other directions should
- * be handled by drivers.*/
- gpio_direction_output(37, 0);
-
platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
#define _COLIBRI_H_
#include <net/ax88796.h>
+#include <mach/mfp.h>
/*
* common settings for all modules
#define __cpu_is_pxa950(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
- id == 0x697; \
+ _id == 0x697; \
})
#else
#define __cpu_is_pxa950(id) (0)
#define U2DMACSR_BUSERRTYPE (7 << 10) /* PX Bus Error Type */
#define U2DMACSR_EORINTR (1 << 9) /* End Of Receive */
#define U2DMACSR_REQPEND (1 << 8) /* Request Pending */
-#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR (1 << 4) /* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR (1 << 3) /* Stop Interrupt (read only) */
#define U2DMACSR_ENDINTR (1 << 2) /* End Interrupt (read / write 1 clear) */
#define U2DMACSR_STARTINTR (1 << 1) /* Start Interrupt (read / write 1 clear) */
#define U2DMACSR_BUSERRINTR (1 << 0) /* Bus Error Interrupt (read / write 1 clear) */
#define BTUART_BASE (0x40200000)
#define STUART_BASE (0x40700000)
-static unsigned long uart_base = FFUART_BASE;
-static unsigned int uart_shift = 2;
-static unsigned int uart_is_pxa = 1;
+static unsigned long uart_base;
+static unsigned int uart_shift;
+static unsigned int uart_is_pxa;
static inline unsigned char uart_read(int offset)
{
static inline void arch_decomp_setup(void)
{
+ /* initialize to default */
+ uart_base = FFUART_BASE;
+ uart_shift = 2;
+ uart_is_pxa = 1;
+
if (machine_is_littleton() || machine_is_intelmote2()
|| machine_is_csb726() || machine_is_stargate2()
|| machine_is_cm_x300() || machine_is_balloon3())
#include <linux/mtd/physmap.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
+#include <linux/slab.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <mach/pm.h>
#include <linux/lis3lv02d.h>
#include <linux/pda_power.h>
#include <linux/power_supply.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
#include <linux/regulator/max8660.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
.active_low = 0,
.wakeup = 0,
.debounce_interval = 5, /* ms */
- .desc = "on/off button",
+ .desc = "on_off button",
},
};
int i;
for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
- if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+ if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
gpio_keys_button[i].active_low = 1;
}
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
- ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
- "supply shutdown");
+ ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
.type = EV_PWR,
.code = KEY_SUSPEND,
.gpio = SPITZ_GPIO_ON_KEY,
- .desc = "On/Off",
+ .desc = "On Off",
.wakeup = 1,
},
/* Two buttons detecting the lid state */
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- /* spi chip selects */
- gpio_direction_output(37, 0);
- gpio_direction_output(24, 0);
- gpio_direction_output(39, 0);
-
platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/gpio.h>
+#include <linux/jiffies.h>
#include <linux/i2c-gpio.h>
#include <linux/serial_8250.h>
#include <linux/smc91x.h>
.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
static struct platform_device i2c_bus_device = {
.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
.udelay = 10,
- .timeout = 100,
+ .timeout = HZ,
};
char *errstr;
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>
+#include <linux/gfp.h>
#include <asm/clkdev.h>
#include <asm/system.h>
else
mask = 2;
- return readl(REALVIEW_SYSMCI) & mask;
+ return !(readl(REALVIEW_SYSMCI) & mask);
}
struct mmci_platform_data realview_mmc0_plat_data = {
*
* DMA functions specific to RiscPC architecture
*/
-#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/dmapool.h>
#include <linux/sysdev.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
config SA1100_H3100
bool "Compaq iPAQ H3100"
select HTC_EGPIO
- select CPU_FREQ_SA1100
+ select CPU_FREQ_SA1110
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
select HTC_EGPIO
- select CPU_FREQ_SA1100
+ select CPU_FREQ_SA1110
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
struct sdram_params *sdram;
const char *name = sdram_name;
+ if (!cpu_is_sa1110())
+ return -ENODEV;
+
if (!name[0]) {
if (machine_is_assabet())
name = "TC59SM716-CL3";
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/mutex.h>
#include <linux/spi/spi.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
/*
* WARNING! Do not include this pl022-specific controller header
* for any generic driver. It is only done in this dummy chip
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/amba/mmci.h>
+#include <linux/slab.h>
#include "mmc.h"
#include "padmux.h"
#include <linux/clockchips.h>
#include <linux/cnt32_to_63.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/clkdev.h>
#include <asm/system.h>
*/
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/mtd.h>
config OUTER_CACHE
bool
+config OUTER_CACHE_SYNC
+ bool
+ help
+ The outer cache has a outer_cache_fns.sync function pointer
+ that can be used to drain the write buffer of the outer cache.
+
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
depends on ARCH_KIRKWOOD || ARCH_MV78XX0
REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4
default y
select OUTER_CACHE
+ select OUTER_CACHE_SYNC
help
This option enables the L2x0 PrimeCell.
int
default 6 if ARM_L1_CACHE_SHIFT_6
default 5
+
+config ARCH_HAS_BARRIERS
+ bool
+ help
+ This option allows the use of custom mandatory barriers
+ included via the mach/barriers.h file.
THUMB( "1: "ins" %1, [%2]\n" ) \
THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, #1\n" \
" b 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (val), "=r" (addr) \
: "0" (err), "2" (addr))
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, #1\n" \
" b 3b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
- " .section .fixup,\"ax\"\n" \
+ " .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"6: mov %0, #1\n" \
" b 5b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
+ " .popsection\n" \
+ " .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 6b\n" \
" .long 2b, 6b\n" \
" .long 3b, 6b\n" \
" .long 4b, 6b\n" \
- " .previous\n" \
+ " .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
}
#endif
+static void l2x0_cache_sync(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&l2x0_lock, flags);
+ cache_sync();
+ spin_unlock_irqrestore(&l2x0_lock, flags);
+}
+
static inline void l2x0_inv_all(void)
{
unsigned long flags;
outer_cache.inv_range = l2x0_inv_range;
outer_cache.clean_range = l2x0_clean_range;
outer_cache.flush_range = l2x0_flush_range;
+ outer_cache.sync = l2x0_cache_sync;
printk(KERN_INFO "L2X0 cache controller enabled\n");
}
kfrom = kmap_atomic(from, KM_USER0);
kto = kmap_atomic(to, KM_USER1);
copy_page(kto, kfrom);
-#ifdef CONFIG_HIGHMEM
- /*
- * kmap_atomic() doesn't set the page virtual address, and
- * kunmap_atomic() takes care of cache flushing already.
- */
- if (page_address(to) != NULL)
-#endif
- __cpuc_flush_dcache_area(kto, PAGE_SIZE);
+ __cpuc_flush_dcache_area(kto, PAGE_SIZE);
kunmap_atomic(kto, KM_USER1);
kunmap_atomic(kfrom, KM_USER0);
}
*/
#include <linux/module.h>
#include <linux/mm.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/init.h>
vaddr += offset;
op(vaddr, len, dir);
kunmap_high(page);
+ } else if (cache_is_vipt()) {
+ pte_t saved_pte;
+ vaddr = kmap_high_l1_vipt(page, &saved_pte);
+ op(vaddr + offset, len, dir);
+ kunmap_high_l1_vipt(page, saved_pte);
}
} else {
vaddr = page_address(page) + offset;
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/pagemap.h>
+#include <linux/gfp.h>
#include <asm/bugs.h>
#include <asm/cacheflush.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
+#include <asm/highmem.h>
#include <asm/smp_plat.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
void __flush_dcache_page(struct address_space *mapping, struct page *page)
{
- void *addr = page_address(page);
-
/*
* Writeback any data associated with the kernel mapping of this
* page. This ensures that data in the physical page is mutually
* coherent with the kernels mapping.
*/
-#ifdef CONFIG_HIGHMEM
- /*
- * kmap_atomic() doesn't set the page virtual address, and
- * kunmap_atomic() takes care of cache flushing already.
- */
- if (addr)
-#endif
- __cpuc_flush_dcache_area(addr, PAGE_SIZE);
+ if (!PageHighMem(page)) {
+ __cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
+ } else {
+ void *addr = kmap_high_get(page);
+ if (addr) {
+ __cpuc_flush_dcache_area(addr, PAGE_SIZE);
+ kunmap_high(page);
+ } else if (cache_is_vipt()) {
+ pte_t saved_pte;
+ addr = kmap_high_l1_vipt(page, &saved_pte);
+ __cpuc_flush_dcache_area(addr, PAGE_SIZE);
+ kunmap_high_l1_vipt(page, saved_pte);
+ }
+ }
/*
* If this is a page cache page, and we have an aliasing VIPT cache,
unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
if (kvaddr >= (void *)FIXADDR_START) {
- __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
+ if (cache_is_vivt())
+ __cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
pte = TOP_PTE(vaddr);
return pte_page(*pte);
}
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+
+#include <linux/percpu.h>
+
+/*
+ * The VIVT cache of a highmem page is always flushed before the page
+ * is unmapped. Hence unmapped highmem pages need no cache maintenance
+ * in that case.
+ *
+ * However unmapped pages may still be cached with a VIPT cache, and
+ * it is not possible to perform cache maintenance on them using physical
+ * addresses unfortunately. So we have no choice but to set up a temporary
+ * virtual mapping for that purpose.
+ *
+ * Yet this VIPT cache maintenance may be triggered from DMA support
+ * functions which are possibly called from interrupt context. As we don't
+ * want to keep interrupt disabled all the time when such maintenance is
+ * taking place, we therefore allow for some reentrancy by preserving and
+ * restoring the previous fixmap entry before the interrupted context is
+ * resumed. If the reentrancy depth is 0 then there is no need to restore
+ * the previous fixmap, and leaving the current one in place allow it to
+ * be reused the next time without a TLB flush (common with DMA).
+ */
+
+static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
+
+void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
+{
+ unsigned int idx, cpu = smp_processor_id();
+ int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+ unsigned long vaddr, flags;
+ pte_t pte, *ptep;
+
+ idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ ptep = TOP_PTE(vaddr);
+ pte = mk_pte(page, kmap_prot);
+
+ if (!in_interrupt())
+ preempt_disable();
+
+ raw_local_irq_save(flags);
+ (*depth)++;
+ if (pte_val(*ptep) == pte_val(pte)) {
+ *saved_pte = pte;
+ } else {
+ *saved_pte = *ptep;
+ set_pte_ext(ptep, pte, 0);
+ local_flush_tlb_kernel_page(vaddr);
+ }
+ raw_local_irq_restore(flags);
+
+ return (void *)vaddr;
+}
+
+void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
+{
+ unsigned int idx, cpu = smp_processor_id();
+ int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+ unsigned long vaddr, flags;
+ pte_t pte, *ptep;
+
+ idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ ptep = TOP_PTE(vaddr);
+ pte = mk_pte(page, kmap_prot);
+
+ BUG_ON(pte_val(*ptep) != pte_val(pte));
+ BUG_ON(*depth <= 0);
+
+ raw_local_irq_save(flags);
+ (*depth)--;
+ if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
+ set_pte_ext(ptep, saved_pte, 0);
+ local_flush_tlb_kernel_page(vaddr);
+ }
+ raw_local_irq_restore(flags);
+
+ if (!in_interrupt())
+ preempt_enable();
+}
+
+#endif /* CONFIG_CPU_CACHE_VIPT */
#include <linux/initrd.h>
#include <linux/sort.h>
#include <linux/highmem.h>
+#include <linux/gfp.h>
#include <asm/mach-types.h>
#include <asm/sections.h>
printk("Mem-info:\n");
show_free_areas();
for_each_online_node(node) {
- pg_data_t *n = NODE_DATA(node);
- struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
for_each_nodebank (i,mi,node) {
struct membank *bank = &mi->bank[i];
unsigned int pfn1, pfn2;
pfn1 = bank_pfn_start(bank);
pfn2 = bank_pfn_end(bank);
- page = map + pfn1;
- end = map + pfn2;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
do {
total++;
reserved_pages = free_pages = 0;
for_each_online_node(node) {
- pg_data_t *n = NODE_DATA(node);
- struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
for_each_nodebank(i, &meminfo, node) {
struct membank *bank = &meminfo.bank[i];
unsigned int pfn1, pfn2;
pfn1 = bank_pfn_start(bank);
pfn2 = bank_pfn_end(bank);
- page = map + pfn1;
- end = map + pfn2;
+ page = pfn_to_page(pfn1);
+ end = pfn_to_page(pfn2 - 1) + 1;
do {
if (PageReserved(page))
user_pgprot |= L_PTE_SHARED;
kern_pgprot |= L_PTE_SHARED;
vecs_pgprot |= L_PTE_SHARED;
+ mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S;
+ mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED;
+ mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
+ mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
#endif
pgd_t *pgd;
int i;
- if (current->mm && current->mm->pgd)
- pgd = current->mm->pgd;
- else
- pgd = init_mm.pgd;
+ /*
+ * We need to access to user-mode page tables here. For kernel threads
+ * we don't have any user-mode mappings so we use the context that we
+ * "borrowed".
+ */
+ pgd = current->active_mm->pgd;
base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
* published by the Free Software Foundation.
*/
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <linux/highmem.h>
#include <asm/pgalloc.h>
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
mov pc, lr
- .previous
+ .section .text
/*
* cpu_sa1100_proc_fin()
@ to fault. Emit the appropriate exception gunk to fix things up.
@ ??? For some reason, faults can happen at .Lx2 even with a
@ plain LDR instruction. Weird, but it seems harmless.
- .section .fixup,"ax"
+ .pushsection .fixup,"ax"
.align 2
.Lfix: mov pc, r9 @ let the user eat segfaults
- .previous
+ .popsection
- .section __ex_table,"a"
+ .pushsection __ex_table,"a"
.align 3
.long .Lx1, .Lfix
- .previous
+ .popsection
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <mach/audmux.h>
#include <mach/hardware.h>
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__
+
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG (CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
-
-/* LED switchs */
-#define CPLD_LED_REG (CPLD_ADDR + 0x00)
-/* buttons */
-#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
-/* module reset register */
-#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
-/* CPU ID and Personality ID */
-#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
-
-/* CPLD IRQ line for external uart, external ethernet etc */
-#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
-
-#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
-#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
-#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
-#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
-#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
-
-#define MXC_MAX_EXP_IO_LINES 16
-
-#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
#define DMA_MODE_WRITE 1
#define DMA_MODE_MASK 1
-#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+#define MX1_DMA_REG(offset) MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x) MX1_DMA_REG(0x8c + ((x) << 6))
#define IMX_DMA_MEMSIZE_32 (0 << 4)
#define IMX_DMA_MEMSIZE_8 (1 << 4)
* FB100000 70000000 1M SPBA 0
* FB000000 73F00000 1M AIPS 1
* FB200000 83F00000 1M AIPS 2
- * FA100000 8FFFC000 16K TZIC (interrupt controller)
+ * 8FFFC000 16K TZIC (interrupt controller)
* 90000000 256M CSD0 SDRAM/DDR
* A0000000 256M CSD1 SDRAM/DDR
* B0000000 128M CS0 Flash
* C8000000 64M CS3 Flash
* CC000000 32M CS4 SRAM
* CE000000 32M CS5 SRAM
- * F9000000 CFFF0000 64K NFC (NAND Flash AXI)
+ * CFFF0000 64K NFC (NAND Flash AXI)
*
*/
+/*
+ * IROM
+ */
+#define MX51_IROM_BASE_ADDR 0x0
+#define MX51_IROM_SIZE SZ_64K
+
/*
* IRAM
*/
* NFC
*/
#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */
-#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000
#define MX51_NFC_AXI_SIZE SZ_64K
/*
#define MX51_GPU_BASE_ADDR 0x20000000
#define MX51_GPU2D_BASE_ADDR 0xD0000000
-#define MX51_TZIC_BASE_ADDR 0x8FFFC000
-#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000
-#define MX51_TZIC_SIZE SZ_16K
+#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000
+#define MX51_TZIC_BASE_ADDR 0xE0000000
#define MX51_DEBUG_BASE_ADDR 0x60000000
#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000
#define MX51_IO_ADDRESS(x) \
(void __iomem *) \
(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
- MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+ MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
0xDEADBEEF)
/*
#define MX51_IRAM_IO_ADDRESS(x) \
(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
-#define MX51_TZIC_IO_ADDRESS(x) \
- (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
-
#define MX51_DEBUG_IO_ADDRESS(x) \
(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
#define MX51_AIPS2_IO_ADDRESS(x) \
(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
-#define MX51_NFC_AXI_IO_ADDRESS(x) \
- (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
-
#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
/*
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern unsigned int system_rev;
-
-static inline unsigned int mx51_revision(void)
-{
- return system_rev;
-}
+extern int mx51_revision(void);
#endif
#endif /* __ASM_ARCH_MXC_MX51_H__ */
#define MX2X_UART1_BASE_ADDR 0x1000a000
#define MX3X_UART1_BASE_ADDR 0x43F90000
#define MX3X_UART2_BASE_ADDR 0x43F94000
+#define MX51_UART1_BASE_ADDR 0x73fbc000
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
case MACH_TYPE_MAGX_ZN5:
uart_base = MX3X_UART2_BASE_ADDR;
break;
+ case MACH_TYPE_MX51_BABBAGE:
+ uart_base = MX51_UART1_BASE_ADDR;
+ break;
default:
break;
}
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#define NO_LENGTH_CHECK 0xffffffff
-unsigned char omap_bootloader_tag[512];
-int omap_bootloader_tag_len;
-
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
#include <linux/clocksource.h>
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
#ifdef CONFIG_ARCH_OMAP16XX
static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
}
#else
#define omap16xx_32k_read NULL
#ifdef CONFIG_ARCH_OMAP2420
static cycle_t omap2420_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2420_32k_read NULL
#ifdef CONFIG_ARCH_OMAP2430
static cycle_t omap2430_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2430_32k_read NULL
#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap34xx_32k_read NULL
#ifdef CONFIG_ARCH_OMAP4
static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
- return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap44xx_32k_read NULL
clocksource_32k.mult = clocksource_hz2mult(32768,
clocksource_32k.shift);
+ offset_32k = clocksource_32k.read(&clocksource_32k);
+
if (clocksource_register(&clocksource_32k))
printk(err, clocksource_32k.name);
}
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <mach/hardware.h>
{
u32 l;
+ /*
+ * The CPC/CDAC register needs to be initialized to zero
+ * before starting dma transfer.
+ */
+ if (cpu_is_omap15xx())
+ dma_write(0, CPC(lch));
+ else
+ dma_write(0, CDAC(lch));
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
- if (trigger & IRQ_TYPE_EDGE_BOTH)
+ if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
-#define INT_34XX_BENCH_MPU_EMUL 3
-
#define INT_35XX_HECC0_IRQ 24
#define INT_35XX_HECC1_IRQ 28
#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67
#define OMAP44XX_MCBSP1_BASE 0x49022000
#define OMAP44XX_MCBSP2_BASE 0x49024000
#define OMAP44XX_MCBSP3_BASE 0x49026000
-#define OMAP44XX_MCBSP4_BASE 0x48074000
+#define OMAP44XX_MCBSP4_BASE 0x48096000
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
/* size (4 KiB) for IO mapping */
#define NAND_IO_SIZE SZ_4K
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+ return 0;
+}
+#endif
#define OMAP4430_PRM_BASE 0x4a306000
#define OMAP44XX_GPMC_BASE 0x50000000
#define OMAP443X_SCM_BASE 0x4a002000
-#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP443X_CTRL_BASE 0x4a100000
#define OMAP44XX_IC_BASE 0x48200000
#define OMAP44XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
+ u16 sysc_flags;
u8 idlemodes;
- u8 sysc_flags;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
- u8 power;
+ u16 power;
};
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/platform_device.h>
#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/clk.h>
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <plat/mailbox.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <plat/dma.h>
#include <plat/mcbsp.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
GFP_KERNEL);
- if (!dbgfs_state)
+ if (!dbgfs_chan)
goto err_alloc;
chandir = debugfs_create_dir("channels", dbgfs_root);
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/cpufreq.h>
#include <linux/seq_file.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/map.h>
#include <mach/regs-mem.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/amba/pl093.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
+#include <linux/gfp.h>
#include <mach/irqs.h>
#include <mach/map.h>
* published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
* published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
* published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
* published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <plat/pm.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/dmapool.h>
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Feb 20 14:16:15 2010
+# Last update: Sat May 1 10:36:42 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
aquila MACH_AQUILA AQUILA 2676
spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677
sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678
-surf7x30 MACH_SURF7X30 SURF7X30 2679
+msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679
micro2440 MACH_MICRO2440 MICRO2440 2680
am2440 MACH_AM2440 AM2440 2681
tq2440 MACH_TQ2440 TQ2440 2682
mioa702 MACH_MIOA702 MIOA702 2691
hpmin MACH_HPMIN HPMIN 2692
ak880xak MACH_AK880XAK AK880XAK 2693
+arm926tomap850 MACH_ARM926TOMAP850 ARM926TOMAP850 2694
+lkevm MACH_LKEVM LKEVM 2695
+mw6410 MACH_MW6410 MW6410 2696
+terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697
+cpu8000e MACH_CPU8000E CPU8000E 2698
+catania MACH_CATANIA CATANIA 2699
+tokyo MACH_TOKYO TOKYO 2700
+msm7201a_surf MACH_MSM7201A_SURF MSM7201A_SURF 2701
+msm7201a_ffa MACH_MSM7201A_FFA MSM7201A_FFA 2702
+msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703
+msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704
+msm7x27_surf MACH_MSM7X27_SURF MSM7X27_SURF 2705
+msm7x27_ffa MACH_MSM7X27_FFA MSM7X27_FFA 2706
+msm7x30_ffa MACH_MSM7X30_FFA MSM7X30_FFA 2707
+qsd8x50_surf MACH_QSD8X50_SURF QSD8X50_SURF 2708
+qsd8x50_comet MACH_QSD8X50_COMET QSD8X50_COMET 2709
+qsd8x50_ffa MACH_QSD8X50_FFA QSD8X50_FFA 2710
+qsd8x50a_surf MACH_QSD8X50A_SURF QSD8X50A_SURF 2711
+qsd8x50a_ffa MACH_QSD8X50A_FFA QSD8X50A_FFA 2712
+adx_xgcp10 MACH_ADX_XGCP10 ADX_XGCP10 2713
+mcgwumts2a MACH_MCGWUMTS2A MCGWUMTS2A 2714
+mobikt MACH_MOBIKT MOBIKT 2715
+mx53_evk MACH_MX53_EVK MX53_EVK 2716
+igep0030 MACH_IGEP0030 IGEP0030 2717
+axell_h40_h50_ctrl MACH_AXELL_H40_H50_CTRL AXELL_H40_H50_CTRL 2718
+dtcommod MACH_DTCOMMOD DTCOMMOD 2719
+gould MACH_GOULD GOULD 2720
+siberia MACH_SIBERIA SIBERIA 2721
+sbc3530 MACH_SBC3530 SBC3530 2722
+qarm MACH_QARM QARM 2723
+mips MACH_MIPS MIPS 2724
+mx27grb MACH_MX27GRB MX27GRB 2725
+sbc8100 MACH_SBC8100 SBC8100 2726
+saarb MACH_SAARB SAARB 2727
+omap3mini MACH_OMAP3MINI OMAP3MINI 2728
+cnmbook7se MACH_CNMBOOK7SE CNMBOOK7SE 2729
+catan MACH_CATAN CATAN 2730
+harmony MACH_HARMONY HARMONY 2731
+tonga MACH_TONGA TONGA 2732
+cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733
+htcrhodiumcdma MACH_HTCRHODIUMCDMA HTCRHODIUMCDMA 2734
+epc_g45 MACH_EPC_G45 EPC_G45 2735
+epc_lpc3250 MACH_EPC_LPC3250 EPC_LPC3250 2736
+mxc91341evb MACH_MXC91341EVB MXC91341EVB 2737
+rtw1000 MACH_RTW1000 RTW1000 2738
+bobcat MACH_BOBCAT BOBCAT 2739
+trizeps6 MACH_TRIZEPS6 TRIZEPS6 2740
+msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741
+nedap9263 MACH_NEDAP9263 NEDAP9263 2742
+netgear_ms2110 MACH_NETGEAR_MS2110 NETGEAR_MS2110 2743
+bmx MACH_BMX BMX 2744
+netstream MACH_NETSTREAM NETSTREAM 2745
+vpnext_rcu MACH_VPNEXT_RCU VPNEXT_RCU 2746
+vpnext_mpu MACH_VPNEXT_MPU VPNEXT_MPU 2747
+bcmring_tablet_v1 MACH_BCMRING_TABLET_V1 BCMRING_TABLET_V1 2748
+sgarm10 MACH_SGARM10 SGARM10 2749
+cm_t3517 MACH_CM_T3517 CM_T3517 2750
+omap3_cps MACH_OMAP3_CPS OMAP3_CPS 2751
+axar1500_receiver MACH_AXAR1500_RECEIVER AXAR1500_RECEIVER 2752
+wbd222 MACH_WBD222 WBD222 2753
+mt65xx MACH_MT65XX MT65XX 2754
+msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755
+msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756
+vmc300 MACH_VMC300 VMC300 2757
+tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758
+nanos MACH_NANOS NANOS 2759
+stamp9g10 MACH_STAMP9G10 STAMP9G10 2760
+stamp9g45 MACH_STAMP9G45 STAMP9G45 2761
+h6053 MACH_H6053 H6053 2762
+smint01 MACH_SMINT01 SMINT01 2763
+prtlvt2 MACH_PRTLVT2 PRTLVT2 2764
+ap420 MACH_AP420 AP420 2765
+htcshift MACH_HTCSHIFT HTCSHIFT 2766
+davinci_dm365_fc MACH_DAVINCI_DM365_FC DAVINCI_DM365_FC 2767
+msm8x55_surf MACH_MSM8X55_SURF MSM8X55_SURF 2768
+msm8x55_ffa MACH_MSM8X55_FFA MSM8X55_FFA 2769
+esl_vamana MACH_ESL_VAMANA ESL_VAMANA 2770
+sbc35 MACH_SBC35 SBC35 2771
+mpx6446 MACH_MPX6446 MPX6446 2772
+oreo_controller MACH_OREO_CONTROLLER OREO_CONTROLLER 2773
+kopin_models MACH_KOPIN_MODELS KOPIN_MODELS 2774
+ttc_vision2 MACH_TTC_VISION2 TTC_VISION2 2775
+cns3420vb MACH_CNS3420VB CNS3420VB 2776
+lpc2 MACH_LPC2 LPC2 2777
+olympus MACH_OLYMPUS OLYMPUS 2778
+vortex MACH_VORTEX VORTEX 2779
+s5pc200 MACH_S5PC200 S5PC200 2780
+ecucore_9263 MACH_ECUCORE_9263 ECUCORE_9263 2781
+smdkc200 MACH_SMDKC200 SMDKC200 2782
+emsiso_sx27 MACH_EMSISO_SX27 EMSISO_SX27 2783
+apx_som9g45_ek MACH_APX_SOM9G45_EK APX_SOM9G45_EK 2784
+songshan MACH_SONGSHAN SONGSHAN 2785
+tianshan MACH_TIANSHAN TIANSHAN 2786
+vpx500 MACH_VPX500 VPX500 2787
+am3517sam MACH_AM3517SAM AM3517SAM 2788
+skat91_sim508 MACH_SKAT91_SIM508 SKAT91_SIM508 2789
+skat91_s3e MACH_SKAT91_S3E SKAT91_S3E 2790
+omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791
+df7220 MACH_DF7220 DF7220 2792
+nemini MACH_NEMINI NEMINI 2793
+t8200 MACH_T8200 T8200 2794
+apf51 MACH_APF51 APF51 2795
+dr_rc_unit MACH_DR_RC_UNIT DR_RC_UNIT 2796
+bordeaux MACH_BORDEAUX BORDEAUX 2797
+catania_b MACH_CATANIA_B CATANIA_B 2798
+mx51_ocean MACH_MX51_OCEAN MX51_OCEAN 2799
+ti8168evm MACH_TI8168EVM TI8168EVM 2800
+neocoreomap MACH_NEOCOREOMAP NEOCOREOMAP 2801
+withings_wbp MACH_WITHINGS_WBP WITHINGS_WBP 2802
+dbps MACH_DBPS DBPS 2803
+sbc9261 MACH_SBC9261 SBC9261 2804
+pcbfp0001 MACH_PCBFP0001 PCBFP0001 2805
+speedy MACH_SPEEDY SPEEDY 2806
+chrysaor MACH_CHRYSAOR CHRYSAOR 2807
+tango MACH_TANGO TANGO 2808
+synology_dsx11 MACH_SYNOLOGY_DSX11 SYNOLOGY_DSX11 2809
+hanlin_v3ext MACH_HANLIN_V3EXT HANLIN_V3EXT 2810
+hanlin_v5 MACH_HANLIN_V5 HANLIN_V5 2811
+hanlin_v3plus MACH_HANLIN_V3PLUS HANLIN_V3PLUS 2812
+iriver_story MACH_IRIVER_STORY IRIVER_STORY 2813
+irex_iliad MACH_IREX_ILIAD IREX_ILIAD 2814
+irex_dr1000 MACH_IREX_DR1000 IREX_DR1000 2815
+teton_bga MACH_TETON_BGA TETON_BGA 2816
+snapper9g45 MACH_SNAPPER9G45 SNAPPER9G45 2817
+tam3517 MACH_TAM3517 TAM3517 2818
+pdc100 MACH_PDC100 PDC100 2819
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */
-/*
- * Synchronise the hardware VFP state of a thread other than current with the
- * saved one. This function is used by the ptrace mechanism.
- */
-#ifdef CONFIG_SMP
-void vfp_sync_hwstate(struct thread_info *thread)
-{
-}
-
-void vfp_flush_hwstate(struct thread_info *thread)
-{
- /*
- * On SMP systems, the VFP state is automatically saved at every
- * context switch. We mark the thread VFP state as belonging to a
- * non-existent CPU so that the saved one will be reloaded when
- * needed.
- */
- thread->vfpstate.hard.cpu = NR_CPUS;
-}
-#else
void vfp_sync_hwstate(struct thread_info *thread)
{
unsigned int cpu = get_cpu();
last_VFP_context[cpu] = NULL;
}
+#ifdef CONFIG_SMP
+ /*
+ * For SMP we still have to take care of the case where the thread
+ * migrates to another CPU and then back to the original CPU on which
+ * the last VFP user is still the same thread. Mark the thread VFP
+ * state as belonging to a non-existent CPU so that the saved one will
+ * be reloaded in the above case.
+ */
+ thread->vfpstate.hard.cpu = NR_CPUS;
+#endif
put_cpu();
}
-#endif
#include <linux/smp.h>
*/
elf_hwcap |= HWCAP_VFP;
#ifdef CONFIG_VFPv3
- if (VFP_arch >= 3) {
+ if (VFP_arch >= 2) {
elf_hwcap |= HWCAP_VFPv3;
/*
#include <linux/fs.h>
#include <linux/pm.h>
#include <linux/ptrace.h>
+#include <linux/slab.h>
#include <linux/reboot.h>
#include <linux/tick.h>
#include <linux/uaccess.h>
THREAD_SIZE - sizeof(struct pt_regs));
}
-static void user_enable_single_step(struct task_struct *tsk)
+void user_enable_single_step(struct task_struct *tsk)
{
pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <mach/smc.h>
*/
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <asm/addrspace.h>
#include <asm/cacheflush.h>
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/pgtable.h>
#include <asm/addrspace.h>
#ifndef __BLACKFIN_MMU_CONTEXT_H__
#define __BLACKFIN_MMU_CONTEXT_H__
-#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/bitops.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kthread.h>
#include <linux/unistd.h>
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/tick.h>
#include <linux/fs.h>
#include <linux/suspend.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
* Licensed under the GPL-2 or later.
*/
+#include <linux/gfp.h>
#include <linux/swap.h>
#include <linux/bootmem.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#include <asm/blackfin.h>
#include <asm/mem_map.h>
#include "blackfin_sram.h"
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/major.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/init.h>
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/fs.h>
-#include <linux/slab.h>
#include <arch/svinto.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/fs.h>
if ((res->flags & IORESOURCE_IO) && (start & 0x300))
start = (start + 0x3ff) & ~0x3ff;
- return start
+ return start;
}
int pcibios_enable_resources(struct pci_dev *dev, int mask)
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <asm/io.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
#include <linux/errno.h>
#include <linux/major.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/poll.h>
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/fs.h>
-#include <linux/slab.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/timer_defs.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/seq_file.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#if 0
#define DEBUGP printk
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <asm/ptrace.h>
#include <asm/uaccess.h>
*
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <asm/tlb.h>
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL)
-
#ifdef CONFIG_MMU
#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
+#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL)
#else
-#define USER_DS KERNEL_DS
+#define USER_DS MAKE_MM_SEG(memory_end)
+#define KERNEL_DS MAKE_MM_SEG(0xe0000000UL)
#endif
#define get_ds() (KERNEL_DS)
#define VERIFY_READ 0
#define VERIFY_WRITE 1
-#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
-
/*
* check that a range of addresses falls within the current address limit
*/
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
*/
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pci.h>
if ((res->flags & IORESOURCE_IO) && (start & 0x300))
start = (start + 0x3ff) & ~0x3ff;
- return start
+ return start;
}
r = &dev->resource[idx];
if (!r->start)
continue;
- if (pci_claim_resource(dev, idx) < 0)
- printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
+ pci_claim_resource(dev, idx);
}
}
pcibios_allocate_bus_resources(&bus->children);
DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
r->start, r->end, r->flags, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/hardirq.h>
+#include <linux/gfp.h>
#include <asm/pgalloc.h>
#include <asm/io.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/pagemap.h>
+#include <linux/gfp.h>
#include <linux/swap.h>
#include <linux/mm.h>
#include <linux/kernel.h>
*/
#include <linux/sched.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/quicklist.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <asm/setup.h>
#include <asm/segment.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/setup.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <asm/setup.h>
#include <asm/segment.h>
#ifndef _ASM_DMI_H
#define _ASM_DMI_H 1
+#include <linux/slab.h>
#include <asm/io.h>
/* Use normal IO mappings for DMI */
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/acpi.h>
#include <asm/acpi-ext.h>
#include <linux/efi.h>
#include <linux/mmzone.h>
#include <linux/nodemask.h>
+#include <linux/slab.h>
#include <acpi/processor.h>
#include <asm/io.h>
#include <asm/iosapic.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include <linux/efi.h>
#include <linux/kexec.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/kernel_stat.h>
-#include <linux/slab.h>
#include <linux/ptrace.h>
#include <linux/random.h> /* for rand_initialize_irq() */
#include <linux/signal.h>
#include <linux/cpumask.h>
#include <linux/kdebug.h>
#include <linux/cpu.h>
+#include <linux/gfp.h>
#include <asm/delay.h>
#include <asm/machvec.h>
#include <linux/smp.h>
#include <linux/workqueue.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <asm/machvec.h>
/* Glue code to lib/swiotlb.c */
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <linux/cache.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/rcupdate.h>
#include <linux/completion.h>
#include <linux/tracehook.h>
+#include <linux/slab.h>
#include <asm/errno.h>
#include <asm/intrinsics.h>
#include <linux/kallsyms.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/personality.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/thread_info.h>
#include <linux/unistd.h>
*/
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/node.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/nodemask.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/efi.h>
#include <linux/genalloc.h>
+#include <linux/gfp.h>
#include <asm/page.h>
#include <asm/pal.h>
#include <asm/system.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/percpu.h>
-#include <linux/gfp.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/kvm_host.h>
#include <linux/kvm.h>
{
struct kvm_memory_slot *memslot;
int r, i;
- long n, base;
+ long base;
+ unsigned long n;
unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
base = memslot->base_gfn / BITS_PER_LONG;
for (i = 0; i < n/sizeof(long); ++i) {
struct kvm_dirty_log *log)
{
int r;
- int n;
+ unsigned long n;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
if (is_dirty) {
kvm_flush_remote_tlbs(kvm);
memslot = &kvm->memslots->memslots[log->slot];
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
r = 0;
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/nodemask.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
#include <asm/meminit.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/log2.h>
#include <asm/mman.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <asm/mmu_context.h>
#include <linux/bootmem.h>
#include <linux/string.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/sn/bte.h>
#include <asm/sn/sn_sal.h>
#include "xtalk/hubdev.h"
#include <linux/acpi.h>
+#include <linux/slab.h>
/*
*/
#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <asm/sn/types.h>
#include <asm/sn/addrs.h>
#include <asm/sn/sn_feature_sets.h>
* Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
+#include <linux/slab.h>
#include <asm/sn/types.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/rculist.h>
+#include <linux/slab.h>
#include <asm/sn/addrs.h>
#include <asm/sn/arch.h>
#include <asm/sn/intr.h>
#include <linux/pci.h>
#include <linux/cpumask.h>
#include <linux/msi.h>
+#include <linux/slab.h>
#include <asm/sn/addrs.h>
#include <asm/sn/intr.h>
* a description of how these routines should be used.
*/
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <asm/dma.h>
#include <linux/interrupt.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <asm/sn/addrs.h>
#include <asm/sn/geo.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
#include <asm/sn/io.h>
#include <linux/types.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/addrs.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <xen/interface/xen.h>
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/hardirq.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <linux/nodemask.h>
#include <linux/pfn.h>
+#include <linux/gfp.h>
#include <asm/types.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/ioport.h>
#include <linux/capability.h>
static inline int atomic_sub_and_test(int i, atomic_t *v)
{
char c;
- __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i));
+ __asm__ __volatile__("subl %2,%1; seq %0"
+ : "=d" (c), "+m" (*v)
+ : "id" (i));
return c != 0;
}
static inline int atomic_add_negative(int i, atomic_t *v)
{
char c;
- __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
+ __asm__ __volatile__("addl %2,%1; smi %0"
+ : "=d" (c), "+m" (*v)
+ : "id" (i));
return c != 0;
}
#define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif
+#if defined(CONFIG_M5272)
+#define MCFUART_TXFIFOSIZE 25
+#else
+#define MCFUART_TXFIFOSIZE 1
+#endif
/****************************************************************************/
#endif /* mcfuart_h */
#ifndef __uClinux__
# ifdef __mcoldfire__
unsigned long sc_fpregs[2][2]; /* room for two fp registers */
- unsigned long sc_fpcntl[3];
- unsigned char sc_fpstate[16+6*8];
# else
unsigned long sc_fpregs[2*3]; /* room for two fp registers */
+# endif
unsigned long sc_fpcntl[3];
unsigned char sc_fpstate[216];
-# endif
#endif
};
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/pgalloc.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/reboot.h>
#include <linux/init_task.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/time.h>
#include <linux/rtc.h>
#include <linux/mm.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <asm/setup.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pagemap.h>
+#include <linux/gfp.h>
#include <asm/setup.h>
#include <asm/segment.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <asm/setup.h>
#include <asm/uaccess.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/ioport.h>
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/bitops.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/sun3x.h>
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
-cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5271,-m5200)
+cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200)
*/
#include <linux/types.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
trap #0
ENTRY(ret_from_user_rt_signal)
- move #__NR_rt_sigreturn,%d0
+ movel #__NR_rt_sigreturn,%d0
trap #0
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <asm/setup.h>
#include <asm/segment.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/setup.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <asm/segment.h>
#include <asm/page.h>
_ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */
_ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */
_ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */
- _ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* reserved */
_ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */
_ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */
_ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */
config HAVE_LATENCYTOP_SUPPORT
def_bool y
-config PCI
- def_bool n
-
config DTC
def_bool y
echo '* linux.bin - Create raw binary'
echo ' linux.bin.gz - Create compressed raw binary'
echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
- echo ' - stripped elf with fdt blob
+ echo ' - stripped elf with fdt blob'
echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
echo ' *_defconfig - Select default config from arch/microblaze/configs'
echo ''
echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
echo ' (minus the .dts extension).'
endef
+
+MRPROPER_FILES += $(boot)/simpleImage.*
endif
$(obj)/linux.bin: vmlinux FORCE
- [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
- touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
$(call if_changed,objcopy)
$(call if_changed,uimage)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
$(obj)/%.dtb: $(dtstree)/%.dts FORCE
$(call if_changed,dtc)
-clean-kernel += linux.bin linux.bin.gz simpleImage.*
-
-clean-files += *.dtb simpleImage.*.unstrip
+clean-files += *.dtb simpleImage.*.unstrip linux.bin.ub
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 10:02:59 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May 6 11:22:14 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_XILINX_EMACLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb 3 10:03:21 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May 6 11:25:12 2010
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
CONFIG_DTC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# Advanced setup
#
+# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
+CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_XILINX_EMACLITE is not set
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_DEBUG_OBJECTS_WORK is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_HEART_BEAT is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
#include <asm/registers.h>
-#define L1_CACHE_SHIFT 2
+#define L1_CACHE_SHIFT 5
/* word-granular cache in microblaze */
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
#endif
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
#endif /* _ASM_MICROBLAZE_DMA_H */
void die(const char *str, struct pt_regs *fp, long err);
void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
#if defined(CONFIG_KGDB)
void (*debugger)(struct pt_regs *regs);
int (*debugger_bpt)(struct pt_regs *regs);
__futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("andn %1,%0,%4;", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
__futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg);
#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
+#define ioread16be(addr) __raw_readw((u16 *)(addr))
+#define ioread32be(addr) __raw_readl((u32 *)(addr))
+#define iowrite16be(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
+#define iowrite32be(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
+
/* These are the definitions for the x86 IO instructions
* inb/inw/inl/outb/outw/outl, the "string" versions
* insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
#ifdef CONFIG_MMU
-#define mm_ptov(addr) ((void *)__phys_to_virt(addr))
-#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr))
#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
#ifndef __ASSEMBLY__
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
#endif /* CONFIG_MMU */
-# ifndef CONFIG_MMU
-# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
-# define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-# define free_user_page(page, addr) free_page(addr)
-# else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-# endif /* CONFIG_MMU */
-
+# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
# define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
#define HAVE_PCI_LEGACY 1
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
/* The PCI address space does equal the physical memory
* address space (no IOMMU). The IDE and SCSI device layers use
* this boolean for bounce buffer decisions.
#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
-{
- pte_t *pte;
- extern void *early_get_page(void);
- if (mem_init_done) {
- pte = (pte_t *)__get_free_page(GFP_KERNEL |
- __GFP_REPEAT | __GFP_ZERO);
- } else {
- pte = (pte_t *)early_get_page();
- if (pte)
- clear_page(pte);
- }
- return pte;
-}
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long address)
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry. flush_hash_page is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
/*
* Encode and decode a swap entry.
* Note that the bits we use in a PTE for representing a swap entry
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 })
-
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk(unsigned long addr, int len);
extern unsigned long iopa(unsigned long addr);
-/* extern unsigned long mm_ptov(unsigned long addr) \
- __attribute__ ((const)); TBD */
/* Values for nocacheflag and cmode */
/* These are not used by the APUS kernel_map, but prevents
#define IOMAP_NOCACHE_NONSER 2
#define IOMAP_NO_COPYBACK 3
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
- int nocacheflag, unsigned long *memavailp);
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode(unsigned long address, unsigned long size,
- unsigned int cmode);
-
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
#define kern_addr_valid(addr) (1)
void do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long error_code);
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags);
-
-void __init adjust_total_lowmem(void);
void mapin_ram(void);
int map_page(unsigned long va, phys_addr_t pa, int flags);
extern unsigned long ioremap_bot, ioremap_base;
void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
+void consistent_free(size_t size, void *vaddr);
void consistent_sync(void *vaddr, size_t size, int direction);
void consistent_sync_page(struct page *page, unsigned long offset,
size_t size, int direction);
#include <asm/ptrace.h>
#include <asm/setup.h>
#include <asm/registers.h>
-#include <asm/segment.h>
#include <asm/entry.h>
#include <asm/current.h>
+++ /dev/null
-/*
- * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
- * Copyright (C) 2008-2009 PetaLogix
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef _ASM_MICROBLAZE_SEGMENT_H
-#define _ASM_MICROBLAZE_SEGMENT_H
-
-# ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-/*
- * On Microblaze the fs value is actually the top of the corresponding
- * address space.
- *
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
- */
-# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-# ifndef CONFIG_MMU
-# define KERNEL_DS MAKE_MM_SEG(0)
-# define USER_DS KERNEL_DS
-# else
-# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
-# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
-# endif
-
-# define get_ds() (KERNEL_DS)
-# define get_fs() (current_thread_info()->addr_limit)
-# define set_fs(val) (current_thread_info()->addr_limit = (val))
-
-# define segment_eq(a, b) ((a).seg == (b).seg)
-
-# endif /* __ASSEMBLY__ */
-#endif /* _ASM_MICROBLAZE_SEGMENT_H */
#ifndef __ASSEMBLY__
# include <linux/types.h>
# include <asm/processor.h>
-# include <asm/segment.h>
/*
* low level task data that entry.S needs immediate access to
__u32 fsr;
};
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
struct thread_info {
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
extern void _tlbia(void);
#define __tlbia() { preempt_disable(); _tlbia(); preempt_enable(); }
+#define __tlbie(x) { _tlbie(x); }
static inline void local_flush_tlb_all(void)
{ __tlbia(); }
{ __tlbia(); }
static inline void local_flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
- { _tlbie(vmaddr); }
+ { __tlbie(vmaddr); }
static inline void local_flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{ __tlbia(); }
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/pgtable.h>
-#include <asm/segment.h>
#include <linux/string.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
-#define __clear_user(addr, n) (memset((void *)(addr), 0, (n)), 0)
-
-#ifndef CONFIG_MMU
-
-extern int ___range_ok(unsigned long addr, unsigned long size);
-
-#define __range_ok(addr, size) \
- ___range_ok((unsigned long)(addr), (unsigned long)(size))
-
-#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
-#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
-
-/* Undefined function to trigger linker error */
-extern int bad_user_access_length(void);
-
-/* FIXME this is function for optimalization -> memcpy */
-#define __get_user(var, ptr) \
-({ \
- int __gu_err = 0; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- (var) = *(ptr); \
- break; \
- case 8: \
- memcpy((void *) &(var), (ptr), 8); \
- break; \
- default: \
- (var) = 0; \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- __gu_err; \
-})
+/*
+ * On Microblaze the fs value is actually the top of the corresponding
+ * address space.
+ *
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
+ */
+# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
+# ifndef CONFIG_MMU
+# define KERNEL_DS MAKE_MM_SEG(0)
+# define USER_DS KERNEL_DS
+# else
+# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
+# endif
-/* FIXME is not there defined __pu_val */
-#define __put_user(var, ptr) \
-({ \
- int __pu_err = 0; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- *(ptr) = (var); \
- break; \
- case 8: { \
- typeof(*(ptr)) __pu_val = (var); \
- memcpy(ptr, &__pu_val, sizeof(__pu_val)); \
- } \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
+# define get_ds() (KERNEL_DS)
+# define get_fs() (current_thread_info()->addr_limit)
+# define set_fs(val) (current_thread_info()->addr_limit = (val))
-#define __put_user_bad() (bad_user_access_length(), (-EFAULT))
+# define segment_eq(a, b) ((a).seg == (b).seg)
-#define put_user(x, ptr) __put_user((x), (ptr))
-#define get_user(x, ptr) __get_user((x), (ptr))
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
-#define copy_to_user(to, from, n) (memcpy((to), (from), (n)), 0)
-#define copy_from_user(to, from, n) (memcpy((to), (from), (n)), 0)
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
-#define __copy_to_user(to, from, n) (copy_to_user((to), (from), (n)))
-#define __copy_from_user(to, from, n) (copy_from_user((to), (from), (n)))
-#define __copy_to_user_inatomic(to, from, n) \
- (__copy_to_user((to), (from), (n)))
-#define __copy_from_user_inatomic(to, from, n) \
- (__copy_from_user((to), (from), (n)))
+#ifndef CONFIG_MMU
-static inline unsigned long clear_user(void *addr, unsigned long size)
+/* Check against bounds of physical memory */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
{
- if (access_ok(VERIFY_WRITE, addr, size))
- size = __clear_user(addr, size);
- return size;
+ return ((addr < memory_start) ||
+ ((addr + size) > memory_end));
}
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
+#define __range_ok(addr, size) \
+ ___range_ok((unsigned long)(addr), (unsigned long)(size))
-extern long strncpy_from_user(char *dst, const char *src, long count);
-extern long strnlen_user(const char *src, long count);
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
-#else /* CONFIG_MMU */
+#else
/*
* Address is valid if:
/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
type?"WRITE":"READ",addr,size,get_fs().seg)) */
-/*
- * All the __XXX versions macros/functions below do not perform
- * access checking. It is assumed that the necessary checks have been
- * already performed before the finction (macro) is called.
- */
+#endif
-#define get_user(x, ptr) \
-({ \
- access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \
- ? __get_user((x), (ptr)) : -EFAULT; \
-})
+#ifdef CONFIG_MMU
+# define __FIXUP_SECTION ".section .fixup,\"ax\"\n"
+# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n"
+#else
+# define __FIXUP_SECTION ".section .discard,\"ax\"\n"
+# define __EX_TABLE_SECTION ".section .discard,\"a\"\n"
+#endif
-#define put_user(x, ptr) \
-({ \
- access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \
- ? __put_user((x), (ptr)) : -EFAULT; \
+extern unsigned long __copy_tofrom_user(void __user *to,
+ const void __user *from, unsigned long size);
+
+/* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail. */
+static inline unsigned long __must_check __clear_user(void __user *to,
+ unsigned long n)
+{
+ /* normal memset with two words to __ex_table */
+ __asm__ __volatile__ ( \
+ "1: sb r0, %2, r0;" \
+ " addik %0, %0, -1;" \
+ " bneid %0, 1b;" \
+ " addik %2, %2, 1;" \
+ "2: " \
+ __EX_TABLE_SECTION \
+ ".word 1b,2b;" \
+ ".previous;" \
+ : "=r"(n) \
+ : "0"(n), "r"(to)
+ );
+ return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+ unsigned long n)
+{
+ might_sleep();
+ if (unlikely(!access_ok(VERIFY_WRITE, to, n)))
+ return n;
+
+ return __clear_user(to, n);
+}
+
+/* put_user and get_user macros */
+extern long __user_bad(void);
+
+#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ ( \
+ "1:" insn " %1, %2, r0;" \
+ " addk %0, r0, r0;" \
+ "2: " \
+ __FIXUP_SECTION \
+ "3: brid 2b;" \
+ " addik %0, r0, %3;" \
+ ".previous;" \
+ __EX_TABLE_SECTION \
+ ".word 1b,3b;" \
+ ".previous;" \
+ : "=&r"(__gu_err), "=r"(__gu_val) \
+ : "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
})
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
#define __get_user(x, ptr) \
({ \
unsigned long __gu_val; \
__get_user_asm("lw", (ptr), __gu_val, __gu_err); \
break; \
default: \
- __gu_val = 0; __gu_err = -EINVAL; \
+ /* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
} \
x = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
-#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+
+#define get_user(x, ptr) \
({ \
- __asm__ __volatile__ ( \
- "1:" insn " %1, %2, r0; \
- addk %0, r0, r0; \
- 2: \
- .section .fixup,\"ax\"; \
- 3: brid 2b; \
- addik %0, r0, %3; \
- .previous; \
- .section __ex_table,\"a\"; \
- .word 1b,3b; \
- .previous;" \
- : "=r"(__gu_err), "=r"(__gu_val) \
- : "r"(__gu_ptr), "i"(-EFAULT) \
- ); \
+ access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \
+ ? __get_user((x), (ptr)) : -EFAULT; \
+})
+
+#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ ( \
+ "1:" insn " %1, %2, r0;" \
+ " addk %0, r0, r0;" \
+ "2: " \
+ __FIXUP_SECTION \
+ "3: brid 2b;" \
+ " addik %0, r0, %3;" \
+ ".previous;" \
+ __EX_TABLE_SECTION \
+ ".word 1b,3b;" \
+ ".previous;" \
+ : "=&r"(__gu_err) \
+ : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
})
+#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \
+({ \
+ __asm__ __volatile__ (" lwi %0, %1, 0;" \
+ "1: swi %0, %2, 0;" \
+ " lwi %0, %1, 4;" \
+ "2: swi %0, %2, 4;" \
+ " addk %0, r0, r0;" \
+ "3: " \
+ __FIXUP_SECTION \
+ "4: brid 3b;" \
+ " addik %0, r0, %3;" \
+ ".previous;" \
+ __EX_TABLE_SECTION \
+ ".word 1b,4b,2b,4b;" \
+ ".previous;" \
+ : "=&r"(__gu_err) \
+ : "r"(&__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
+ ); \
+})
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
#define __put_user(x, ptr) \
({ \
__typeof__(*(ptr)) volatile __gu_val = (x); \
case 1: \
__put_user_asm("sb", (ptr), __gu_val, __gu_err); \
break; \
- case 2: \
+ case 2: \
__put_user_asm("sh", (ptr), __gu_val, __gu_err); \
break; \
case 4: \
__put_user_asm_8((ptr), __gu_val, __gu_err); \
break; \
default: \
- __gu_err = -EINVAL; \
+ /*__gu_err = -EINVAL;*/ __gu_err = __user_bad(); \
} \
__gu_err; \
})
-#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \
-({ \
-__asm__ __volatile__ (" lwi %0, %1, 0; \
- 1: swi %0, %2, 0; \
- lwi %0, %1, 4; \
- 2: swi %0, %2, 4; \
- addk %0,r0,r0; \
- 3: \
- .section .fixup,\"ax\"; \
- 4: brid 3b; \
- addik %0, r0, %3; \
- .previous; \
- .section __ex_table,\"a\"; \
- .word 1b,4b,2b,4b; \
- .previous;" \
- : "=&r"(__gu_err) \
- : "r"(&__gu_val), \
- "r"(__gu_ptr), "i"(-EFAULT) \
- ); \
-})
+#ifndef CONFIG_MMU
-#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
-({ \
- __asm__ __volatile__ ( \
- "1:" insn " %1, %2, r0; \
- addk %0, r0, r0; \
- 2: \
- .section .fixup,\"ax\"; \
- 3: brid 2b; \
- addik %0, r0, %3; \
- .previous; \
- .section __ex_table,\"a\"; \
- .word 1b,3b; \
- .previous;" \
- : "=r"(__gu_err) \
- : "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
- ); \
-})
+#define put_user(x, ptr) __put_user((x), (ptr))
-/*
- * Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
- */
-static inline int clear_user(char *to, int size)
-{
- if (size && access_ok(VERIFY_WRITE, to, size)) {
- __asm__ __volatile__ (" \
- 1: \
- sb r0, %2, r0; \
- addik %0, %0, -1; \
- bneid %0, 1b; \
- addik %2, %2, 1; \
- 2: \
- .section __ex_table,\"a\"; \
- .word 1b,2b; \
- .section .text;" \
- : "=r"(size) \
- : "0"(size), "r"(to)
- );
- }
- return size;
-}
+#else /* CONFIG_MMU */
-#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n))
+#define put_user(x, ptr) \
+({ \
+ access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \
+ ? __put_user((x), (ptr)) : -EFAULT; \
+})
+#endif /* CONFIG_MMU */
+
+/* copy_to_from_user */
+#define __copy_from_user(to, from, n) \
+ __copy_tofrom_user((__force void __user *)(to), \
+ (void __user *)(from), (n))
#define __copy_from_user_inatomic(to, from, n) \
copy_from_user((to), (from), (n))
-#define copy_to_user(to, from, n) \
- (access_ok(VERIFY_WRITE, (to), (n)) ? \
- __copy_tofrom_user((void __user *)(to), \
- (__force const void __user *)(from), (n)) \
- : -EFAULT)
+static inline long copy_from_user(void *to,
+ const void __user *from, unsigned long n)
+{
+ might_sleep();
+ if (access_ok(VERIFY_READ, from, n))
+ return __copy_from_user(to, from, n);
+ return n;
+}
-#define __copy_to_user(to, from, n) copy_to_user((to), (from), (n))
+#define __copy_to_user(to, from, n) \
+ __copy_tofrom_user((void __user *)(to), \
+ (__force const void __user *)(from), (n))
#define __copy_to_user_inatomic(to, from, n) copy_to_user((to), (from), (n))
-#define copy_from_user(to, from, n) \
- (access_ok(VERIFY_READ, (from), (n)) ? \
- __copy_tofrom_user((__force void __user *)(to), \
- (void __user *)(from), (n)) \
- : -EFAULT)
+static inline long copy_to_user(void __user *to,
+ const void *from, unsigned long n)
+{
+ might_sleep();
+ if (access_ok(VERIFY_WRITE, to, n))
+ return __copy_to_user(to, from, n);
+ return n;
+}
+/*
+ * Copy a null terminated string from userspace.
+ */
extern int __strncpy_user(char *to, const char __user *from, int len);
-extern int __strnlen_user(const char __user *sstr, int len);
-#define strncpy_from_user(to, from, len) \
- (access_ok(VERIFY_READ, from, 1) ? \
- __strncpy_user(to, from, len) : -EFAULT)
-#define strnlen_user(str, len) \
- (access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
+#define __strncpy_from_user __strncpy_user
-#endif /* CONFIG_MMU */
-
-extern unsigned long __copy_tofrom_user(void __user *to,
- const void __user *from, unsigned long size);
+static inline long
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ if (!access_ok(VERIFY_READ, src, 1))
+ return -EFAULT;
+ return __strncpy_from_user(dst, src, count);
+}
/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
+ * Return the size of a string (including the ending 0)
*
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
+ * Return 0 on exception, a value greater than N if too long
*/
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
+extern int __strnlen_user(const char __user *sstr, int len);
+
+static inline long strnlen_user(const char __user *src, long n)
+{
+ if (!access_ok(VERIFY_READ, src, 1))
+ return 0;
+ return __strnlen_user(src, n);
+}
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#include <linux/hardirq.h>
#include <linux/thread_info.h>
#include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
int main(int argc, char *argv[])
{
}
-/* Helper macro for computing the limits of cache range loops */
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \
do { \
int align = ~(cache_line_length - 1); \
end = min(start + cache_size, end); \
start &= align; \
- end = ((end & align) + cache_line_length); \
} while (0);
/*
*/
#define CACHE_ALL_LOOP(cache_size, line_length, op) \
do { \
- unsigned int len = cache_size; \
+ unsigned int len = cache_size - line_length; \
int step = -line_length; \
- BUG_ON(step >= 0); \
+ WARN_ON(step >= 0); \
\
__asm__ __volatile__ (" 1: " #op " %0, r0; \
bgtid %0, 1b; \
: "memory"); \
} while (0);
-
-#define CACHE_ALL_LOOP2(cache_size, line_length, op) \
-do { \
- unsigned int len = cache_size; \
- int step = -line_length; \
- BUG_ON(step >= 0); \
- \
- __asm__ __volatile__ (" 1: " #op " r0, %0; \
- bgtid %0, 1b; \
- addk %0, %0, %1; \
- " : : "r" (len), "r" (step) \
- : "memory"); \
-} while (0);
-
-/* for wdc.flush/clear */
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to substract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
#define CACHE_RANGE_LOOP_2(start, end, line_length, op) \
do { \
int step = -line_length; \
+ int align = ~(line_length - 1); \
+ end = ((end & align) == end) ? end - line_length : end & align; \
int count = end - start; \
- BUG_ON(count <= 0); \
+ WARN_ON(count < 0); \
\
__asm__ __volatile__ (" 1: " #op " %0, %1; \
bgtid %1, 1b; \
#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \
do { \
int volatile temp; \
- BUG_ON(end - start <= 0); \
+ int align = ~(line_length - 1); \
+ end = ((end & align) == end) ? end - line_length : end & align; \
+ WARN_ON(end - start < 0); \
\
__asm__ __volatile__ (" 1: " #op " %1, r0; \
cmpu %0, %1, %2; \
#endif
}
-/* FIXME this is weird - should be only wdc but not work
- * MS: I am getting bus errors and other weird things */
+/* FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
static void __invalidate_dcache_all_wb(void)
{
#ifndef ASM_LOOP
#endif
pr_debug("%s\n", __func__);
#ifdef ASM_LOOP
- CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
- wdc.clear)
+ CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+ wdc)
#else
for (i = 0; i < cpuinfo.dcache_size;
i += cpuinfo.dcache_line_length)
- __asm__ __volatile__ ("wdc.clear %0, r0;" \
+ __asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
}
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc.clear %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc %0, r0;" \
: : "r" (i));
#endif
#ifdef ASM_LOOP
CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
#else
- for (i = start; i < end; i += cpuinfo.icache_line_length)
+ for (i = start; i < end; i += cpuinfo.dcache_line_length)
__asm__ __volatile__ ("wdc.flush %0, r0;" \
: : "r" (i));
#endif
}
}
}
- invalidate_dcache();
+/* FIXME Invalidation is done in U-BOOT
+ * WT cache: Data is already written to main memory
+ * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+ */
+ /* invalidate_dcache(); */
enable_dcache();
invalidate_icache();
*/
#include <linux/init.h>
-#include <linux/slab.h>
#include <asm/cpuinfo.h>
#include <asm/pvr.h>
if (cpuinfo.use_icache)
count += seq_printf(m,
- "Icache:\t\t%ukB\n",
- cpuinfo.icache_size >> 10);
+ "Icache:\t\t%ukB\tline length:\t%dB\n",
+ cpuinfo.icache_size >> 10,
+ cpuinfo.icache_line_length);
else
count += seq_printf(m, "Icache:\t\tno\n");
if (cpuinfo.use_dcache) {
count += seq_printf(m,
- "Dcache:\t\t%ukB\n",
- cpuinfo.dcache_size >> 10);
+ "Dcache:\t\t%ukB\tline length:\t%dB\n",
+ cpuinfo.dcache_size >> 10,
+ cpuinfo.dcache_line_length);
if (cpuinfo.dcache_wb)
count += seq_printf(m, "\t\twrite-back\n");
else
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <linux/dma-debug.h>
#include <asm/bug.h>
#include <asm/cacheflush.h>
static unsigned long get_dma_direct_offset(struct device *dev)
{
- if (dev)
+ if (likely(dev))
return (unsigned long)dev->archdata.dma_data;
return PCI_DRAM_OFFSET; /* FIXME Not sure if is correct */
void *vaddr, dma_addr_t dma_handle)
{
#ifdef NOT_COHERENT_CACHE
- consistent_free(vaddr);
+ consistent_free(size, vaddr);
#else
free_pages((unsigned long)vaddr, get_order(size));
#endif
}
printk(KERN_WARNING "Divide by zero exception " \
"in kernel mode.\n");
- die("Divide by exception", regs, SIGBUS);
+ die("Divide by zero exception", regs, SIGBUS);
break;
case MICROBLAZE_FPU_EXCEPTION:
pr_debug(KERN_WARNING "FPU exception\n");
return ret;
}
-static int ret_addr; /* initialized as 0 by default */
-
/* I believe that first is called ftrace_make_nop before this function */
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
int ret;
- ret_addr = addr; /* saving where the barrier jump is */
pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n",
__func__, (unsigned int)addr, (unsigned int)rec->ip, imm);
ret = ftrace_modify_code(rec->ip, imm);
ret = ftrace_modify_code(ip, upper);
ret += ftrace_modify_code(ip + 4, lower);
- /* We just need to remove the rtsd r15, 8 by NOP */
- BUG_ON(!ret_addr);
- if (ret_addr)
- ret += ftrace_modify_code(ret_addr, MICROBLAZE_NOP);
- else
- ret = 1; /* fault */
+ /* We just need to replace the rtsd r15, 8 with NOP */
+ ret += ftrace_modify_code((unsigned long)&ftrace_caller,
+ MICROBLAZE_NOP);
/* All changes are done - lets do caches consistent */
flush_icache();
* for more details.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
#endif /* CONFIG_MMU */
- .text
+ __HEAD
ENTRY(_start)
+#if CONFIG_KERNEL_BASE_ADDR == 0
+ brai TOPHYS(real_start)
+ .org 0x100
+real_start:
+#endif
+
mfs r1, rmsr
andi r1, r1, ~2
mts rmsr, r1
tophys(r4,r4) /* convert to phys address */
ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */
_copy_command_line:
- lbu r2, r5, r6 /* r7=r5+r6 - r5 contain pointer to command line */
- sb r2, r4, r6 /* addr[r4+r6]= r7*/
+ lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */
+ sb r2, r4, r6 /* addr[r4+r6]= r2*/
addik r6, r6, 1 /* increment counting */
bgtid r3, _copy_command_line /* loop for all entries */
addik r3, r3, -1 /* descrement loop */
* virtual to physical.
*/
nop
- addik r3, r0, 63 /* Invalidate all TLB entries */
+ addik r3, r0, MICROBLAZE_TLB_SIZE -1 /* Invalidate all TLB entries */
_invalidate:
mts rtlbx, r3
mts rtlbhi, r0 /* flush: ensure V is clear */
mfs r5, rmsr;
nop
swi r5, r1, 0;
- mfs r3, resr
+ mfs r4, resr
nop
- mfs r4, rear;
+ mfs r3, rear;
nop
#ifndef CONFIG_MMU
- andi r5, r3, 0x1000; /* Check ESR[DS] */
+ andi r5, r4, 0x1000; /* Check ESR[DS] */
beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */
mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
nop
swi r17, r1, PT_R17
#endif
- andi r5, r3, 0x1F; /* Extract ESR[EXC] */
+ andi r5, r4, 0x1F; /* Extract ESR[EXC] */
#ifdef CONFIG_MMU
/* Calculate exception vector offset = r5 << 2 */
addk r6, r5, r5; /* << 1 */
addk r6, r6, r6; /* << 2 */
+#ifdef DEBUG
/* counting which exception happen */
lwi r5, r0, 0x200 + TOPHYS(r0_ram)
addi r5, r5, 1
lwi r5, r6, 0x200 + TOPHYS(r0_ram)
addi r5, r5, 1
swi r5, r6, 0x200 + TOPHYS(r0_ram)
+#endif
/* end */
/* Load the HW Exception vector */
lwi r6, r6, TOPHYS(_MB_HW_ExceptionVectorTable)
swi r18, r1, PT_R18
or r5, r1, r0
- andi r6, r3, 0x1F; /* Load ESR[EC] */
+ andi r6, r4, 0x1F; /* Load ESR[EC] */
lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */
swi r7, r1, PT_MODE
mfs r7, rfsr
*/
handle_unaligned_ex:
/* Working registers already saved: R3, R4, R5, R6
- * R3 = ESR
- * R4 = EAR
+ * R4 = ESR
+ * R3 = EAR
*/
#ifdef CONFIG_MMU
- andi r6, r3, 0x1000 /* Check ESR[DS] */
+ andi r6, r4, 0x1000 /* Check ESR[DS] */
beqi r6, _no_delayslot /* Branch if ESR[DS] not set */
mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
nop
RESTORE_STATE;
bri unaligned_data_trap
#endif
- andi r6, r3, 0x3E0; /* Mask and extract the register operand */
+ andi r6, r4, 0x3E0; /* Mask and extract the register operand */
srl r6, r6; /* r6 >> 5 */
srl r6, r6;
srl r6, r6;
/* Store the register operand in a temporary location */
sbi r6, r0, TOPHYS(ex_reg_op);
- andi r6, r3, 0x400; /* Extract ESR[S] */
+ andi r6, r4, 0x400; /* Extract ESR[S] */
bnei r6, ex_sw;
ex_lw:
- andi r6, r3, 0x800; /* Extract ESR[W] */
+ andi r6, r4, 0x800; /* Extract ESR[W] */
beqi r6, ex_lhw;
- lbui r5, r4, 0; /* Exception address in r4 */
+ lbui r5, r3, 0; /* Exception address in r3 */
/* Load a word, byte-by-byte from destination address
and save it in tmp space */
sbi r5, r0, TOPHYS(ex_tmp_data_loc_0);
- lbui r5, r4, 1;
+ lbui r5, r3, 1;
sbi r5, r0, TOPHYS(ex_tmp_data_loc_1);
- lbui r5, r4, 2;
+ lbui r5, r3, 2;
sbi r5, r0, TOPHYS(ex_tmp_data_loc_2);
- lbui r5, r4, 3;
+ lbui r5, r3, 3;
sbi r5, r0, TOPHYS(ex_tmp_data_loc_3);
- /* Get the destination register value into r3 */
- lwi r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ /* Get the destination register value into r4 */
+ lwi r4, r0, TOPHYS(ex_tmp_data_loc_0);
bri ex_lw_tail;
ex_lhw:
- lbui r5, r4, 0; /* Exception address in r4 */
+ lbui r5, r3, 0; /* Exception address in r3 */
/* Load a half-word, byte-by-byte from destination
address and save it in tmp space */
sbi r5, r0, TOPHYS(ex_tmp_data_loc_0);
- lbui r5, r4, 1;
+ lbui r5, r3, 1;
sbi r5, r0, TOPHYS(ex_tmp_data_loc_1);
- /* Get the destination register value into r3 */
- lhui r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ /* Get the destination register value into r4 */
+ lhui r4, r0, TOPHYS(ex_tmp_data_loc_0);
ex_lw_tail:
/* Get the destination register number into r5 */
lbui r5, r0, TOPHYS(ex_reg_op);
andi r6, r6, 0x800; /* Extract ESR[W] */
beqi r6, ex_shw;
/* Get the word - delay slot */
- swi r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ swi r4, r0, TOPHYS(ex_tmp_data_loc_0);
/* Store the word, byte-by-byte into destination address */
- lbui r3, r0, TOPHYS(ex_tmp_data_loc_0);
- sbi r3, r4, 0;
- lbui r3, r0, TOPHYS(ex_tmp_data_loc_1);
- sbi r3, r4, 1;
- lbui r3, r0, TOPHYS(ex_tmp_data_loc_2);
- sbi r3, r4, 2;
- lbui r3, r0, TOPHYS(ex_tmp_data_loc_3);
- sbi r3, r4, 3;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ sbi r4, r3, 0;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_1);
+ sbi r4, r3, 1;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_2);
+ sbi r4, r3, 2;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_3);
+ sbi r4, r3, 3;
bri ex_handler_done;
ex_shw:
/* Store the lower half-word, byte-by-byte into destination address */
- swi r3, r0, TOPHYS(ex_tmp_data_loc_0);
- lbui r3, r0, TOPHYS(ex_tmp_data_loc_2);
- sbi r3, r4, 0;
- lbui r3, r0, TOPHYS(ex_tmp_data_loc_3);
- sbi r3, r4, 1;
+ swi r4, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_2);
+ sbi r4, r3, 0;
+ lbui r4, r0, TOPHYS(ex_tmp_data_loc_3);
+ sbi r4, r3, 1;
ex_sw_end: /* Exception handling of store word, ends. */
ex_handler_done:
*/
mfs r11, rpid
nop
- bri 4
- mfs r3, rear /* Get faulting address */
- nop
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
*/
- ori r4, r0, CONFIG_KERNEL_START
- cmpu r4, r3, r4
- bgti r4, ex3
+ ori r5, r0, CONFIG_KERNEL_START
+ cmpu r5, r3, r5
+ bgti r5, ex3
/* First, check if it was a zone fault (which means a user
* tried to access a kernel or read-protected page - always
* a SEGV). All other faults here must be stores, so no
* need to check ESR_S as well. */
- mfs r4, resr
- nop
andi r4, r4, 0x800 /* ESR_Z - zone protection */
bnei r4, ex2
* tried to access a kernel or read-protected page - always
* a SEGV). All other faults here must be stores, so no
* need to check ESR_S as well. */
- mfs r4, resr
- nop
andi r4, r4, 0x800 /* ESR_Z */
bnei r4, ex2
/* get current task address */
* R3 = ESR
*/
- mfs r3, rear /* Get faulting address */
- nop
RESTORE_STATE;
bri page_fault_instr_trap
*/
handle_data_tlb_miss_exception:
/* Working registers already saved: R3, R4, R5, R6
- * R3 = ESR
+ * R3 = EAR, R4 = ESR
*/
mfs r11, rpid
nop
- bri 4
- mfs r3, rear /* Get faulting address */
- nop
/* If we are faulting a kernel address, we have to use the
* kernel page tables. */
- ori r4, r0, CONFIG_KERNEL_START
- cmpu r4, r3, r4
+ ori r6, r0, CONFIG_KERNEL_START
+ cmpu r4, r3, r6
bgti r4, ex5
ori r4, r0, swapper_pg_dir
mts rpid, r0 /* TLB will have 0 TID */
* Many of these bits are software only. Bits we don't set
* here we (properly should) assume have the appropriate value.
*/
+ brid finish_tlb_load
andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */
-
- bri finish_tlb_load
ex7:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
*/
mfs r11, rpid
nop
- bri 4
- mfs r3, rear /* Get faulting address */
- nop
/* If we are faulting a kernel address, we have to use the
* kernel page tables.
lwi r4, r5, 0 /* Get Linux PTE */
andi r6, r4, _PAGE_PRESENT
- beqi r6, ex7
+ beqi r6, ex10
ori r4, r4, _PAGE_ACCESSED
swi r4, r5, 0
* Many of these bits are software only. Bits we don't set
* here we (properly should) assume have the appropriate value.
*/
+ brid finish_tlb_load
andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */
-
- bri finish_tlb_load
ex10:
/* The bailout. Restore registers to pre-exception conditions
* and call the heavyweights to help us out.
andi r5, r5, (MICROBLAZE_TLB_SIZE-1)
ori r6, r0, 1
cmp r31, r5, r6
- blti r31, sem
+ blti r31, ex12
addik r5, r6, 1
- sem:
+ ex12:
/* MS: save back current TLB index */
swi r5, r0, TOPHYS(tlb_index)
nop
/* Done...restore registers and get out of here. */
- ex12:
mts rpid, r11
nop
bri 4
*/
#include <linux/init.h>
+#include <linux/ftrace.h>
#include <linux/kernel.h>
#include <linux/hardirq.h>
#include <linux/interrupt.h>
static u32 concurrent_irq;
-void do_IRQ(struct pt_regs *regs)
+void __irq_entry do_IRQ(struct pt_regs *regs)
{
unsigned int irq;
struct pt_regs *old_regs = set_irq_regs(regs);
* We avoid flushing the pinned 0, 1 and possibly 2 entries.
*/
.globl _tlbia;
+.type _tlbia, @function
.align 4;
_tlbia:
- addik r12, r0, 63 /* flush all entries (63 - 3) */
+ addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */
/* isync */
_tlbia_1:
mts rtlbx, r12
/* sync */
rtsd r15, 8
nop
+ .size _tlbia, . - _tlbia
/*
* Flush MMU TLB for a particular address (in r5)
*/
.globl _tlbie;
+.type _tlbie, @function
.align 4;
_tlbie:
mts rtlbsx, r5 /* look up the address in TLB */
rtsd r15, 8
nop
+ .size _tlbie, . - _tlbie
+
/*
* Allocate TLB entry for early console
*/
.globl early_console_reg_tlb_alloc;
+.type early_console_reg_tlb_alloc, @function
.align 4;
early_console_reg_tlb_alloc:
/*
* Load a TLB entry for the UART, so that microblaze_progress() can use
* the UARTs nice and early. We use a 4k real==virtual mapping.
*/
- ori r4, r0, 63
+ ori r4, r0, MICROBLAZE_TLB_SIZE - 1
mts rtlbx, r4 /* TLB slot 2 */
or r4,r5,r0
rtsd r15, 8
nop
-/*
- * Copy a whole page (4096 bytes).
- */
-#define COPY_16_BYTES \
- lwi r7, r6, 0; \
- lwi r8, r6, 4; \
- lwi r9, r6, 8; \
- lwi r10, r6, 12; \
- swi r7, r5, 0; \
- swi r8, r5, 4; \
- swi r9, r5, 8; \
- swi r10, r5, 12
-
-
-/* FIXME DCACHE_LINE_BYTES (CONFIG_XILINX_MICROBLAZE0_DCACHE_LINE_LEN * 4)*/
-#define DCACHE_LINE_BYTES (4 * 4)
-
-.globl copy_page;
-.align 4;
-copy_page:
- ori r11, r0, (PAGE_SIZE/DCACHE_LINE_BYTES) - 1
-_copy_page_loop:
- COPY_16_BYTES
-#if DCACHE_LINE_BYTES >= 32
- COPY_16_BYTES
-#endif
- addik r6, r6, DCACHE_LINE_BYTES
- addik r5, r5, DCACHE_LINE_BYTES
- bneid r11, _copy_page_loop
- addik r11, r11, -1
- rtsd r15, 8
- nop
+ .size early_console_reg_tlb_alloc, . - early_console_reg_tlb_alloc
#include <linux/kernel.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/pgalloc.h>
+#include <asm/uaccess.h> /* for USER_DS macros */
#include <asm/cacheflush.h>
void show_regs(struct pt_regs *regs)
void default_idle(void)
{
- if (!hlt_counter) {
+ if (likely(hlt_counter)) {
+ while (!need_resched())
+ cpu_relax();
+ } else {
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb__after_clear_bit();
local_irq_disable();
cpu_sleep();
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
- } else
- while (!need_resched())
- cpu_relax();
+ }
}
void cpu_idle(void)
{
int rval;
unsigned long val = 0;
- unsigned long copied;
switch (request) {
/* Read/write the word at location ADDR in the registers. */
}
#endif /* CONFIG_MTD_UCLINUX_EBSS */
+#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
+#define eprintk early_printk
+#else
+#define eprintk printk
+#endif
+
void __init machine_early_init(const char *cmdline, unsigned int ram,
unsigned int fdt, unsigned int msr)
{
setup_early_printk(NULL);
#endif
- early_printk("Ramdisk addr 0x%08x, ", ram);
+ eprintk("Ramdisk addr 0x%08x, ", ram);
if (fdt)
- early_printk("FDT at 0x%08x\n", fdt);
+ eprintk("FDT at 0x%08x\n", fdt);
else
- early_printk("Compiled-in FDT at 0x%08x\n",
+ eprintk("Compiled-in FDT at 0x%08x\n",
(unsigned int)_fdt_start);
#ifdef CONFIG_MTD_UCLINUX
- early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+ eprintk("Found romfs @ 0x%08x (0x%08x)\n",
romfs_base, romfs_size);
- early_printk("#### klimit %p ####\n", old_klimit);
+ eprintk("#### klimit %p ####\n", old_klimit);
BUG_ON(romfs_size < 0); /* What else can we do? */
- early_printk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
+ eprintk("Moved 0x%08x bytes from 0x%08x to 0x%08x\n",
romfs_size, romfs_base, (unsigned)&_ebss);
- early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
+ eprintk("New klimit: 0x%08x\n", (unsigned)klimit);
#endif
#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
if (msr)
- early_printk("!!!Your kernel has setup MSR instruction but "
+ eprintk("!!!Your kernel has setup MSR instruction but "
"CPU don't have it %d\n", msr);
#else
if (!msr)
- early_printk("!!!Your kernel not setup MSR instruction but "
+ eprintk("!!!Your kernel not setup MSR instruction but "
"CPU have it %d\n", msr);
#endif
#include <linux/semaphore.h>
#include <linux/uaccess.h>
#include <linux/unistd.h>
+#include <linux/slab.h>
#include <asm/syscalls.h>
__enable_hw_exceptions();
}
-static int kstack_depth_to_print = 24;
+static unsigned long kstack_depth_to_print = 24;
static int __init kstack_setup(char *s)
{
- kstack_depth_to_print = strict_strtoul(s, 0, NULL);
-
- return 1;
+ return !strict_strtoul(s, 0, &kstack_depth_to_print);
}
__setup("kstack=", kstack_setup);
show_stack(NULL, NULL);
}
EXPORT_SYMBOL(dump_stack);
-
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data)
-{
- if (data)
- printk(KERN_CRIT "kernel BUG at %s:%d (data = %p)!\n",
- file, line, data);
- else
- printk(KERN_CRIT "kernel BUG at %s:%d!\n", file, line);
-
- machine_halt();
-}
-
-int bad_trap(int trap_num, struct pt_regs *regs)
-{
- printk(KERN_CRIT
- "unimplemented trap %d called at 0x%08lx, pid %d!\n",
- trap_num, regs->pc, current->pid);
- return -ENOSYS;
-}
-
-int debug_trap(struct pt_regs *regs)
-{
- int i;
- printk(KERN_CRIT "debug trap\n");
- for (i = 0; i < 32; i++) {
- /* printk("r%i:%08X\t",i,regs->gpr[i]); */
- if ((i % 4) == 3)
- printk(KERN_CRIT "\n");
- }
- printk(KERN_CRIT "pc:%08lX\tmsr:%08lX\n", regs->pc, regs->msr);
- return -ENOSYS;
-}
-#endif
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_text = . ;
_stext = . ;
- *(.text .text.*)
+ HEAD_TEXT
+ TEXT_TEXT
*(.fixup)
EXIT_TEXT
EXIT_CALL
lib-y += memcpy.o memmove.o
endif
-lib-$(CONFIG_NO_MMU) += uaccess.o
-lib-$(CONFIG_MMU) += uaccess_old.o
+lib-y += uaccess_old.o
*/
#include <linux/linkage.h>
-
+ .text
.globl memcpy
+ .type memcpy, @function
.ent memcpy
memcpy:
rtsd r15, 8
nop
+.size memcpy, . - memcpy
.end memcpy
/*----------------------------------------------------------------------------*/
.globl memmove
+ .type memmove, @function
.ent memmove
memmove:
rtsd r15, 8
nop
+.size memmove, . - memmove
.end memmove
const uint32_t *i_src;
uint32_t *i_dst;
- if (c >= 4) {
+ if (likely(c >= 4)) {
unsigned value, buf_hold;
/* Align the dstination to a word boundry. */
#ifdef __HAVE_ARCH_MEMSET
void *memset(void *v_src, int c, __kernel_size_t n)
{
-
char *src = v_src;
#ifdef CONFIG_OPT_LIB_FUNCTION
uint32_t *i_src;
- uint32_t w32;
+ uint32_t w32 = 0;
#endif
/* Truncate c to 8 bits */
c = (c & 0xFF);
#ifdef CONFIG_OPT_LIB_FUNCTION
- /* Make a repeating word out of it */
- w32 = c;
- w32 |= w32 << 8;
- w32 |= w32 << 16;
+ if (unlikely(c)) {
+ /* Make a repeating word out of it */
+ w32 = c;
+ w32 |= w32 << 8;
+ w32 |= w32 << 16;
+ }
- if (n >= 4) {
+ if (likely(n >= 4)) {
/* Align the destination to a word boundary */
/* This is done in an endian independant manner */
switch ((unsigned) src & 3) {
+++ /dev/null
-/*
- * Copyright (C) 2006 Atmark Techno, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/string.h>
-#include <asm/uaccess.h>
-
-#include <asm/bug.h>
-
-long strnlen_user(const char __user *src, long count)
-{
- return strlen(src) + 1;
-}
-
-#define __do_strncpy_from_user(dst, src, count, res) \
- do { \
- char *tmp; \
- strncpy(dst, src, count); \
- for (tmp = dst; *tmp && count > 0; tmp++, count--) \
- ; \
- res = (tmp - dst); \
- } while (0)
-
-long __strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res;
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- __do_strncpy_from_user(dst, src, count, res);
- return res;
-}
-
-unsigned long __copy_tofrom_user(void __user *to,
- const void __user *from, unsigned long size)
-{
- memcpy(to, from, size);
- return 0;
-}
.text
.globl __strncpy_user;
+.type __strncpy_user, @function
.align 4;
__strncpy_user:
3:
rtsd r15,8
nop
-
+ .size __strncpy_user, . - __strncpy_user
.section .fixup, "ax"
.align 2
.text
.globl __strnlen_user;
+.type __strnlen_user, @function
.align 4;
__strnlen_user:
addik r3,r6,0
3:
rtsd r15,8
nop
-
+ .size __strnlen_user, . - __strnlen_user
.section .fixup,"ax"
4:
*/
.text
.globl __copy_tofrom_user;
+.type __copy_tofrom_user, @function
.align 4;
__copy_tofrom_user:
/*
* r7, r3 - count
* r4 - tempval
*/
- addik r3,r7,0
- beqi r3,3f
-1:
- lbu r4,r6,r0
- addik r6,r6,1
-2:
- sb r4,r5,r0
- addik r3,r3,-1
- bneid r3,1b
- addik r5,r5,1 /* delay slot */
+ beqid r7, 3f /* zero size is not likely */
+ andi r3, r7, 0x3 /* filter add count */
+ bneid r3, 4f /* if is odd value then byte copying */
+ or r3, r5, r6 /* find if is any to/from unaligned */
+ andi r3, r3, 0x3 /* mask unaligned */
+ bneid r3, 1f /* it is unaligned -> then jump */
+ or r3, r0, r0
+
+/* at least one 4 byte copy */
+5: lw r4, r6, r3
+6: sw r4, r5, r3
+ addik r7, r7, -4
+ bneid r7, 5b
+ addik r3, r3, 4
+ addik r3, r7, 0
+ rtsd r15, 8
+ nop
+4: or r3, r0, r0
+1: lbu r4,r6,r3
+2: sb r4,r5,r3
+ addik r7,r7,-1
+ bneid r7,1b
+ addik r3,r3,1 /* delay slot */
3:
+ addik r3,r7,0
rtsd r15,8
nop
-
+ .size __copy_tofrom_user, . - __copy_tofrom_user
.section __ex_table,"a"
- .word 1b,3b,2b,3b
+ .word 1b,3b,2b,3b,5b,3b,6b,3b
#include <linux/highmem.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/gfp.h>
#include <asm/pgalloc.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/cpuinfo.h>
+#include <asm/tlbflush.h>
#ifndef CONFIG_MMU
-
/* I have to use dcache values because I can't relate on ram size */
-#define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+# define UNCACHED_SHADOW_MASK (cpuinfo.dcache_high - cpuinfo.dcache_base + 1)
+#endif
/*
* Consistent memory allocators. Used for DMA devices that want to
*/
void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
{
- struct page *page, *end, *free;
- unsigned long order;
- void *ret, *virt;
-
- if (in_interrupt())
- BUG();
-
- size = PAGE_ALIGN(size);
- order = get_order(size);
-
- page = alloc_pages(gfp, order);
- if (!page)
- goto no_page;
-
- /* We could do with a page_to_phys and page_to_bus here. */
- virt = page_address(page);
- ret = ioremap(virt_to_phys(virt), size);
- if (!ret)
- goto no_remap;
-
- /*
- * Here's the magic! Note if the uncached shadow is not implemented,
- * it's up to the calling code to also test that condition and make
- * other arranegments, such as manually flushing the cache and so on.
- */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
- ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
-#endif
- /* dma_handle is same as physical (shadowed) address */
- *dma_handle = (dma_addr_t)ret;
-
- /*
- * free wasted pages. We skip the first page since we know
- * that it will have count = 1 and won't require freeing.
- * We also mark the pages in use as reserved so that
- * remap_page_range works.
- */
- page = virt_to_page(virt);
- free = page + (size >> PAGE_SHIFT);
- end = page + (1 << order);
-
- for (; page < end; page++) {
- init_page_count(page);
- if (page >= free)
- __free_page(page);
- else
- SetPageReserved(page);
- }
-
- return ret;
-no_remap:
- __free_pages(page, order);
-no_page:
- return NULL;
-}
-
-#else
+ unsigned long order, vaddr;
+ void *ret;
+ unsigned int i, err = 0;
+ struct page *page, *end;
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
-{
- int order, err, i;
- unsigned long page, va, flags;
+#ifdef CONFIG_MMU
phys_addr_t pa;
struct vm_struct *area;
- void *ret;
+ unsigned long va;
+#endif
if (in_interrupt())
BUG();
size = PAGE_ALIGN(size);
order = get_order(size);
- page = __get_free_pages(gfp, order);
- if (!page) {
- BUG();
+ vaddr = __get_free_pages(gfp, order);
+ if (!vaddr)
return NULL;
- }
/*
* we need to ensure that there are no cachelines in use,
* or worse dirty in this area.
*/
- flush_dcache_range(virt_to_phys(page), virt_to_phys(page) + size);
+ flush_dcache_range(virt_to_phys((void *)vaddr),
+ virt_to_phys((void *)vaddr) + size);
+#ifndef CONFIG_MMU
+ ret = (void *)vaddr;
+ /*
+ * Here's the magic! Note if the uncached shadow is not implemented,
+ * it's up to the calling code to also test that condition and make
+ * other arranegments, such as manually flushing the cache and so on.
+ */
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
+ ret = (void *)((unsigned) ret | UNCACHED_SHADOW_MASK);
+# endif
+ if ((unsigned int)ret > cpuinfo.dcache_base &&
+ (unsigned int)ret < cpuinfo.dcache_high)
+ printk(KERN_WARNING
+ "ERROR: Your cache coherent area is CACHED!!!\n");
+
+ /* dma_handle is same as physical (shadowed) address */
+ *dma_handle = (dma_addr_t)ret;
+#else
/* Allocate some common virtual space to map the new pages. */
area = get_vm_area(size, VM_ALLOC);
- if (area == NULL) {
- free_pages(page, order);
+ if (!area) {
+ free_pages(vaddr, order);
return NULL;
}
va = (unsigned long) area->addr;
ret = (void *)va;
/* This gives us the real physical address of the first page. */
- *dma_handle = pa = virt_to_bus((void *)page);
-
- /* MS: This is the whole magic - use cache inhibit pages */
- flags = _PAGE_KERNEL | _PAGE_NO_CACHE;
+ *dma_handle = pa = virt_to_bus((void *)vaddr);
+#endif
/*
- * Set refcount=1 on all pages in an order>0
- * allocation so that vfree() will actually
- * free all pages that were allocated.
+ * free wasted pages. We skip the first page since we know
+ * that it will have count = 1 and won't require freeing.
+ * We also mark the pages in use as reserved so that
+ * remap_page_range works.
*/
- if (order > 0) {
- struct page *rpage = virt_to_page(page);
- for (i = 1; i < (1 << order); i++)
- init_page_count(rpage+i);
+ page = virt_to_page(vaddr);
+ end = page + (1 << order);
+
+ split_page(page, order);
+
+ for (i = 0; i < size && err == 0; i += PAGE_SIZE) {
+#ifdef CONFIG_MMU
+ /* MS: This is the whole magic - use cache inhibit pages */
+ err = map_page(va + i, pa + i, _PAGE_KERNEL | _PAGE_NO_CACHE);
+#endif
+
+ SetPageReserved(page);
+ page++;
}
- err = 0;
- for (i = 0; i < size && err == 0; i += PAGE_SIZE)
- err = map_page(va+i, pa+i, flags);
+ /* Free the otherwise unused pages. */
+ while (page < end) {
+ __free_page(page);
+ page++;
+ }
if (err) {
- vfree((void *)va);
+ free_pages(vaddr, order);
return NULL;
}
return ret;
}
-#endif /* CONFIG_MMU */
EXPORT_SYMBOL(consistent_alloc);
/*
* free page(s) as defined by the above mapping.
*/
-void consistent_free(void *vaddr)
+void consistent_free(size_t size, void *vaddr)
{
+ struct page *page;
+
if (in_interrupt())
BUG();
+ size = PAGE_ALIGN(size);
+
+#ifndef CONFIG_MMU
/* Clear SHADOW_MASK bit in address, and free as per usual */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
+# ifdef CONFIG_XILINX_UNCACHED_SHADOW
vaddr = (void *)((unsigned)vaddr & ~UNCACHED_SHADOW_MASK);
+# endif
+ page = virt_to_page(vaddr);
+
+ do {
+ ClearPageReserved(page);
+ __free_page(page);
+ page++;
+ } while (size -= PAGE_SIZE);
+#else
+ do {
+ pte_t *ptep;
+ unsigned long pfn;
+
+ ptep = pte_offset_kernel(pmd_offset(pgd_offset_k(
+ (unsigned int)vaddr),
+ (unsigned int)vaddr),
+ (unsigned int)vaddr);
+ if (!pte_none(*ptep) && pte_present(*ptep)) {
+ pfn = pte_pfn(*ptep);
+ pte_clear(&init_mm, (unsigned int)vaddr, ptep);
+ if (pfn_valid(pfn)) {
+ page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ __free_page(page);
+ }
+ }
+ vaddr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ /* flush tlb */
+ flush_tlb_all();
#endif
- vfree(vaddr);
}
EXPORT_SYMBOL(consistent_free);
case PCI_DMA_NONE:
BUG();
case PCI_DMA_FROMDEVICE: /* invalidate only */
- flush_dcache_range(start, end);
+ invalidate_dcache_range(start, end);
break;
case PCI_DMA_TODEVICE: /* writeback only */
flush_dcache_range(start, end);
regs->esr = error_code;
/* On a kernel SLB miss we can only check for a valid exception entry */
- if (kernel_mode(regs) && (address >= TASK_SIZE)) {
+ if (unlikely(kernel_mode(regs) && (address >= TASK_SIZE))) {
printk(KERN_WARNING "kernel task_size exceed");
_exception(SIGSEGV, regs, code, address);
}
}
#endif /* CONFIG_KGDB */
- if (in_atomic() || !mm) {
+ if (unlikely(in_atomic() || !mm)) {
if (kernel_mode(regs))
goto bad_area_nosemaphore;
* source. If this is invalid we can skip the address space check,
* thus avoiding the deadlock.
*/
- if (!down_read_trylock(&mm->mmap_sem)) {
+ if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
if (kernel_mode(regs) && !search_exception_tables(regs->pc))
goto bad_area_nosemaphore;
}
vma = find_vma(mm, address);
- if (!vma)
+ if (unlikely(!vma))
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
- if (!(vma->vm_flags & VM_GROWSDOWN))
+ if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
goto bad_area;
- if (!is_write)
+ if (unlikely(!is_write))
goto bad_area;
/*
* before setting the user r1. Thus we allow the stack to
* expand to 1MB without further checks.
*/
- if (address + 0x100000 < vma->vm_end) {
+ if (unlikely(address + 0x100000 < vma->vm_end)) {
/* get user regs even if this fault is in kernel mode */
struct pt_regs *uregs = current->thread.regs;
code = SEGV_ACCERR;
/* a write */
- if (is_write) {
- if (!(vma->vm_flags & VM_WRITE))
+ if (unlikely(is_write)) {
+ if (unlikely(!(vma->vm_flags & VM_WRITE)))
goto bad_area;
/* a read */
} else {
/* protection fault */
- if (error_code & 0x08000000)
+ if (unlikely(error_code & 0x08000000))
goto bad_area;
- if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+ if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC))))
goto bad_area;
}
goto do_sigbus;
BUG();
}
- if (fault & VM_FAULT_MAJOR)
+ if (unlikely(fault & VM_FAULT_MAJOR))
current->maj_flt++;
else
current->min_flt++;
* us unable to handle the page fault gracefully.
*/
out_of_memory:
- if (current->pid == 1) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
up_read(&mm->mmap_sem);
- printk(KERN_WARNING "VM: killing process %s\n", current->comm);
- if (user_mode(regs))
- do_exit(SIGKILL);
- bad_page_fault(regs, address, SIGKILL);
+ if (!user_mode(regs))
+ bad_page_fault(regs, address, SIGKILL);
+ else
+ pagefault_out_of_memory();
return;
do_sigbus:
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/pfn.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include <asm/page.h>
for (addr = begin; addr < end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
- memset((void *)addr, 0xcc, PAGE_SIZE);
free_page(addr);
totalram_pages++;
}
}
#ifndef CONFIG_MMU
-/* Check against bounds of physical memory */
-int ___range_ok(unsigned long addr, unsigned long size)
-{
- return ((addr < memory_start) ||
- ((addr + size) > memory_end));
-}
-EXPORT_SYMBOL(___range_ok);
-
int page_is_ram(unsigned long pfn)
{
return __range_ok(pfn, 0);
err = 0;
set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
__pgprot(flags)));
- if (mem_init_done)
+ if (unlikely(mem_init_done))
flush_HPTE(0, va, pmd_val(*pd));
/* flush_HPTE(0, va, pg); */
}
return err;
}
-void __init adjust_total_lowmem(void)
-{
-/* TBD */
-#if 0
- unsigned long max_low_mem = MAX_LOW_MEM;
-
- if (total_lowmem > max_low_mem) {
- total_lowmem = max_low_mem;
-#ifndef CONFIG_HIGHMEM
- printk(KERN_INFO "Warning, memory limited to %ld Mb, use "
- "CONFIG_HIGHMEM to reach %ld Mb\n",
- max_low_mem >> 20, total_memory >> 20);
- total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
- }
-#endif
-}
-
/*
* Map in all of physical memory starting at CONFIG_KERNEL_START.
*/
/* is x a power of 2? */
#define is_power_of_2(x) ((x) != 0 && (((x) & ((x) - 1)) == 0))
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags)
-{
- int i;
-
- if (virt > CONFIG_KERNEL_START && virt < ioremap_bot)
- ioremap_bot = ioremap_base = virt;
-
- /* Put it in the page tables. */
- for (i = 0; i < size; i += PAGE_SIZE)
- map_page(virt + i, phys + i, flags);
-}
-
/* Scan the real Linux page tables and return a PTE pointer for
* a virtual address in a context.
* Returns true (1) if PTE was found, zero otherwise. The pointer to
return pa;
}
+
+__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ pte_t *pte;
+ if (mem_init_done) {
+ pte = (pte_t *)__get_free_page(GFP_KERNEL |
+ __GFP_REPEAT | __GFP_ZERO);
+ } else {
+ pte = (pte_t *)early_get_page();
+ if (pte)
+ clear_page(pte);
+ }
+ return pte;
+}
#include <linux/syscalls.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
struct pci_dev *dev = bus->self;
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ pci_bus_for_each_resource(bus, res, i) {
res = bus->resource[i];
if (!res)
continue;
* but we want to try to avoid allocating at 0x2900-0x2bff
* which might have be mirrored at 0x0100-0x03ff..
*/
-void pcibios_align_resource(void *data, struct resource *res,
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
if (skip_isa_ioresource_align(dev))
- return;
- if (start & 0x300) {
+ return start;
+ if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
}
+
+ return start;
}
EXPORT_SYMBOL(pcibios_align_resource);
pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
pci_domain_nr(bus), bus->number);
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
+ pci_bus_for_each_resource(bus, res, i) {
res = bus->resource[i];
if (!res || !res->flags
|| res->start > res->end || res->parent)
#include <linux/irq.h>
#include <linux/list.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
family: TNETD7100, 7200 and 7300.
config BCM47XX
- bool "BCM47XX based boards"
+ bool "Broadcom BCM47XX based boards"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PATA_PLATFORM
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PATA_PLATFORM
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
endchoice
+if CPU_LOONGSON2F
+config CPU_NOP_WORKAROUNDS
+ bool
+
+config CPU_JUMP_WORKAROUNDS
+ bool
+
+config CPU_LOONGSON2F_WORKAROUNDS
+ bool "Loongson 2F Workarounds"
+ default y
+ select CPU_NOP_WORKAROUNDS
+ select CPU_JUMP_WORKAROUNDS
+ help
+ Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
+ require workarounds. Without workarounds the system may hang
+ unexpectedly. For more information please refer to the gas
+ -mfix-loongson2f-nop and -mfix-loongson2f-jump options.
+
+ Loongson 2F03 and later have fixed these issues and no workarounds
+ are needed. The workarounds have no significant side effect on them
+ but may decrease the performance of the system so this option should
+ be disabled unless the kernel is intended to be run on 2F01 or 2F02
+ systems.
+
+ If unsure, please say Y.
+endif # CPU_LOONGSON2F
+
config SYS_SUPPORTS_ZBOOT
bool
select HAVE_KERNEL_GZIP
$(call cc-option,-march=loongson2e,-march=r4600)
cflags-$(CONFIG_CPU_LOONGSON2F) += \
$(call cc-option,-march=loongson2f,-march=r4600)
+# enable the workarounds for loongson2f
+ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
+ ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
+ $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
+ else
+ cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
+ endif
+ ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
+ $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
+ else
+ cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
+ endif
+endif
cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32 -Wa,--trap
wmb();
}
-/* use the hexleds to count the number of times the cpu has entered
- * wait, the dots to indicate whether the CPU is currently idle or
- * active (dots off = sleeping, dots on = working) for cases where
- * the number doesn't change for a long(er) period of time.
- */
-static void db1200_wait(void)
-{
- __asm__(" .set push \n"
- " .set mips3 \n"
- " .set noreorder \n"
- " cache 0x14, 0(%0) \n"
- " cache 0x14, 32(%0) \n"
- " cache 0x14, 64(%0) \n"
- /* dots off: we're about to call wait */
- " lui $26, 0xb980 \n"
- " ori $27, $0, 3 \n"
- " sb $27, 0x18($26) \n"
- " sync \n"
- " nop \n"
- " wait \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " nop \n"
- " nop \n"
- /* dots on: there's work to do, increment cntr */
- " lui $26, 0xb980 \n"
- " sb $0, 0x18($26) \n"
- " lui $26, 0xb9c0 \n"
- " lb $27, 0($26) \n"
- " addiu $27, $27, 1 \n"
- " sb $27, 0($26) \n"
- " sync \n"
- " .set pop \n"
- : : "r" (db1200_wait));
-}
-
static int __init db1200_arch_init(void)
{
/* GPIO7 is low-level triggered CPLD cascade */
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
- /* do not autoenable these: CPLD has broken edge int handling,
- * and the CD handler setup requires manual enabling to work
- * around that.
+ /* insert/eject pairs: one of both is always screaming. To avoid
+ * issues they must not be automatically enabled when initially
+ * requested.
*/
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
-
- if (cpu_wait)
- cpu_wait = db1200_wait;
+ irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
+ irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
return 0;
}
.on = vlynq_on,
.off = vlynq_off,
},
- .reset_bit = 26,
+ .reset_bit = 16,
.gpio_bit = 19,
};
}
if (ar7_has_high_cpmac()) {
+ res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
if (!res) {
cpmac_get_mac(1, cpmac_high_data.dev_addr);
#include <asm/addrspace.h>
#include <bcm63xx_board.h>
#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
#include <bcm63xx_dev_pci.h>
.name = "96338GW",
.expected_cpu_id = 0x6338,
+ .has_uart0 = 1,
.has_enet0 = 1,
.enet0 = {
.force_speed_100 = 1,
.name = "96338W",
.expected_cpu_id = 0x6338,
+ .has_uart0 = 1,
.has_enet0 = 1,
.enet0 = {
.force_speed_100 = 1,
static struct board_info __initdata board_96345gw2 = {
.name = "96345GW2",
.expected_cpu_id = 0x6345,
+
+ .has_uart0 = 1,
};
#endif
.name = "96348R",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_pci = 1,
.name = "96348GW-10",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.name = "96348GW-11",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.name = "96348GW",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.name = "F@ST2404",
.expected_cpu_id = 0x6348,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
.enet0 = {
.has_phy = 1,
.has_ehci0 = 1,
};
+static struct board_info __initdata board_rta1025w_16 = {
+ .name = "RTA1025W_16",
+ .expected_cpu_id = 0x6348,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+};
+
+
static struct board_info __initdata board_DV201AMR = {
.name = "DV201AMR",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_pci = 1,
.has_ohci0 = 1,
.name = "96348GW-A",
.expected_cpu_id = 0x6348,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.name = "96358VW",
.expected_cpu_id = 0x6358,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.name = "96358VW2",
.expected_cpu_id = 0x6358,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.name = "AGPF-S0",
.expected_cpu_id = 0x6358,
+ .has_uart0 = 1,
.has_enet0 = 1,
.has_enet1 = 1,
.has_pci = 1,
.has_ohci0 = 1,
.has_ehci0 = 1,
};
+
+static struct board_info __initdata board_DWVS0 = {
+ .name = "DWV-S0",
+ .expected_cpu_id = 0x6358,
+
+ .has_enet0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .enet1 = {
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .has_ohci0 = 1,
+};
#endif
/*
&board_FAST2404,
&board_DV201AMR,
&board_96348gw_a,
+ &board_rta1025w_16,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358
&board_96358vw,
&board_96358vw2,
&board_AGPFS0,
+ &board_DWVS0,
#endif
};
+/*
+ * Register a sane SPROMv2 to make the on-board
+ * bcm4318 WLAN work
+ */
+#ifdef CONFIG_SSB_PCIHOST
+static struct ssb_sprom bcm63xx_sprom = {
+ .revision = 0x02,
+ .board_rev = 0x17,
+ .country_code = 0x0,
+ .ant_available_bg = 0x3,
+ .pa0b0 = 0x15ae,
+ .pa0b1 = 0xfa85,
+ .pa0b2 = 0xfe8d,
+ .pa1b0 = 0xffff,
+ .pa1b1 = 0xffff,
+ .pa1b2 = 0xffff,
+ .gpio0 = 0xff,
+ .gpio1 = 0xff,
+ .gpio2 = 0xff,
+ .gpio3 = 0xff,
+ .maxpwr_bg = 0x004c,
+ .itssi_bg = 0x00,
+ .boardflags_lo = 0x2848,
+ .boardflags_hi = 0x0000,
+};
+#endif
+
+/*
+ * return board name for /proc/cpuinfo
+ */
+const char *board_get_name(void)
+{
+ return board.name;
+}
+
+/*
+ * register & return a new board mac address
+ */
+static int board_get_mac_address(u8 *mac)
+{
+ u8 *p;
+ int count;
+
+ if (mac_addr_used >= nvram.mac_addr_count) {
+ printk(KERN_ERR PFX "not enough mac address\n");
+ return -ENODEV;
+ }
+
+ memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
+ p = mac + ETH_ALEN - 1;
+ count = mac_addr_used;
+
+ while (count--) {
+ do {
+ (*p)++;
+ if (*p != 0)
+ break;
+ p--;
+ } while (p != mac);
+ }
+
+ if (p == mac) {
+ printk(KERN_ERR PFX "unable to fetch mac address\n");
+ return -ENODEV;
+ }
+
+ mac_addr_used++;
+ return 0;
+}
+
/*
* early init callback, read nvram data from flash and checksum it
*/
}
bcm_gpio_writel(val, GPIO_MODE_REG);
+
+ /* Generate MAC address for WLAN and
+ * register our SPROM */
+#ifdef CONFIG_SSB_PCIHOST
+ if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
+ memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
+ printk(KERN_ERR "failed to register fallback SPROM\n");
+ }
+#endif
}
/*
panic("unexpected CPU for bcm963xx board");
}
-/*
- * return board name for /proc/cpuinfo
- */
-const char *board_get_name(void)
-{
- return board.name;
-}
-
-/*
- * register & return a new board mac address
- */
-static int board_get_mac_address(u8 *mac)
-{
- u8 *p;
- int count;
-
- if (mac_addr_used >= nvram.mac_addr_count) {
- printk(KERN_ERR PFX "not enough mac address\n");
- return -ENODEV;
- }
-
- memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
- p = mac + ETH_ALEN - 1;
- count = mac_addr_used;
-
- while (count--) {
- do {
- (*p)++;
- if (*p != 0)
- break;
- p--;
- } while (p != mac);
- }
-
- if (p == mac) {
- printk(KERN_ERR PFX "unable to fetch mac address\n");
- return -ENODEV;
- }
-
- mac_addr_used++;
- return 0;
-}
-
static struct mtd_partition mtd_partitions[] = {
{
.name = "cfe",
},
};
-/*
- * Register a sane SPROMv2 to make the on-board
- * bcm4318 WLAN work
- */
-#ifdef CONFIG_SSB_PCIHOST
-static struct ssb_sprom bcm63xx_sprom = {
- .revision = 0x02,
- .board_rev = 0x17,
- .country_code = 0x0,
- .ant_available_bg = 0x3,
- .pa0b0 = 0x15ae,
- .pa0b1 = 0xfa85,
- .pa0b2 = 0xfe8d,
- .pa1b0 = 0xffff,
- .pa1b1 = 0xffff,
- .pa1b2 = 0xffff,
- .gpio0 = 0xff,
- .gpio1 = 0xff,
- .gpio2 = 0xff,
- .gpio3 = 0xff,
- .maxpwr_bg = 0x004c,
- .itssi_bg = 0x00,
- .boardflags_lo = 0x2848,
- .boardflags_hi = 0x0000,
-};
-#endif
-
static struct gpio_led_platform_data bcm63xx_led_data;
static struct platform_device bcm63xx_gpio_leds = {
{
u32 val;
+ if (board.has_uart0)
+ bcm63xx_uart_register(0);
+
+ if (board.has_uart1)
+ bcm63xx_uart_register(1);
+
if (board.has_pccard)
bcm63xx_pcmcia_register();
if (board.has_dsp)
bcm63xx_dsp_register(&board.dsp);
- /* Generate MAC address for WLAN and
- * register our SPROM */
-#ifdef CONFIG_SSB_PCIHOST
- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0)
- printk(KERN_ERR "failed to register fallback SPROM\n");
- }
-#endif
-
/* read base address of boot chip select (0) */
if (BCMCPU_IS_6345())
val = 0x1fc00000;
[RSET_TIMER] = BCM_6338_TIMER_BASE,
[RSET_WDT] = BCM_6338_WDT_BASE,
[RSET_UART0] = BCM_6338_UART0_BASE,
+ [RSET_UART1] = BCM_6338_UART1_BASE,
[RSET_GPIO] = BCM_6338_GPIO_BASE,
[RSET_SPI] = BCM_6338_SPI_BASE,
[RSET_OHCI0] = BCM_6338_OHCI0_BASE,
[RSET_TIMER] = BCM_6345_TIMER_BASE,
[RSET_WDT] = BCM_6345_WDT_BASE,
[RSET_UART0] = BCM_6345_UART0_BASE,
+ [RSET_UART1] = BCM_6345_UART1_BASE,
[RSET_GPIO] = BCM_6345_GPIO_BASE,
[RSET_SPI] = BCM_6345_SPI_BASE,
[RSET_UDC0] = BCM_6345_UDC0_BASE,
[RSET_TIMER] = BCM_6348_TIMER_BASE,
[RSET_WDT] = BCM_6348_WDT_BASE,
[RSET_UART0] = BCM_6348_UART0_BASE,
+ [RSET_UART1] = BCM_6348_UART1_BASE,
[RSET_GPIO] = BCM_6348_GPIO_BASE,
[RSET_SPI] = BCM_6348_SPI_BASE,
[RSET_OHCI0] = BCM_6348_OHCI0_BASE,
[RSET_TIMER] = BCM_6358_TIMER_BASE,
[RSET_WDT] = BCM_6358_WDT_BASE,
[RSET_UART0] = BCM_6358_UART0_BASE,
+ [RSET_UART1] = BCM_6358_UART1_BASE,
[RSET_GPIO] = BCM_6358_GPIO_BASE,
[RSET_SPI] = BCM_6358_SPI_BASE,
[RSET_OHCI0] = BCM_6358_OHCI0_BASE,
static const int bcm96358_irqs[] = {
[IRQ_TIMER] = BCM_6358_TIMER_IRQ,
[IRQ_UART0] = BCM_6358_UART0_IRQ,
+ [IRQ_UART1] = BCM_6358_UART1_IRQ,
[IRQ_DSL] = BCM_6358_DSL_IRQ,
[IRQ_ENET0] = BCM_6358_ENET0_IRQ,
[IRQ_ENET1] = BCM_6358_ENET1_IRQ,
#include <linux/platform_device.h>
#include <bcm63xx_cpu.h>
-static struct resource uart_resources[] = {
+static struct resource uart0_resources[] = {
{
- .start = -1, /* filled at runtime */
- .end = -1, /* filled at runtime */
+ /* start & end filled at runtime */
.flags = IORESOURCE_MEM,
},
{
- .start = -1, /* filled at runtime */
+ /* start filled at runtime */
.flags = IORESOURCE_IRQ,
},
};
-static struct platform_device bcm63xx_uart_device = {
- .name = "bcm63xx_uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(uart_resources),
- .resource = uart_resources,
+static struct resource uart1_resources[] = {
+ {
+ /* start & end filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* start filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bcm63xx_uart_devices[] = {
+ {
+ .name = "bcm63xx_uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+ .resource = uart0_resources,
+ },
+
+ {
+ .name = "bcm63xx_uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+ .resource = uart1_resources,
+ }
};
-int __init bcm63xx_uart_register(void)
+int __init bcm63xx_uart_register(unsigned int id)
{
- uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
- uart_resources[0].end = uart_resources[0].start;
- uart_resources[0].end += RSET_UART_SIZE - 1;
- uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
- return platform_device_register(&bcm63xx_uart_device);
+ if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
+ return -ENODEV;
+
+ if (id == 1 && !BCMCPU_IS_6358())
+ return -ENODEV;
+
+ if (id == 0) {
+ uart0_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+ uart0_resources[0].end = uart0_resources[0].start +
+ RSET_UART_SIZE - 1;
+ uart0_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+ }
+
+ if (id == 1) {
+ uart1_resources[0].start = bcm63xx_regset_address(RSET_UART1);
+ uart1_resources[0].end = uart1_resources[0].start +
+ RSET_UART_SIZE - 1;
+ uart1_resources[1].start = bcm63xx_get_irq_number(IRQ_UART1);
+ }
+
+ return platform_device_register(&bcm63xx_uart_devices[id]);
}
-arch_initcall(bcm63xx_uart_register);
int __init bcm63xx_gpio_init(void)
{
+ gpio_out_low = bcm_gpio_readl(GPIO_DATA_LO_REG);
+ gpio_out_high = bcm_gpio_readl(GPIO_DATA_HI_REG);
bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count();
pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio);
return gpiochip_add(&bcm63xx_gpio_chip);
}
-
-arch_initcall(bcm63xx_gpio_init);
extern void pci_console_init(const char *arg);
#endif
-#ifdef CONFIG_CAVIUM_RESERVE32
-extern uint64_t octeon_reserve32_memory;
-#endif
static unsigned long long MAX_MEMORY = 512ull << 20;
struct octeon_boot_descriptor *octeon_boot_desc_ptr;
write_octeon_c0_dcacheerr(0);
}
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
-/**
- * Called on every core to setup the wired tlb entry needed
- * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
- *
- */
-static void octeon_hal_setup_per_cpu_reserved32(void *unused)
-{
- /*
- * The config has selected to wire the reserve32 memory for all
- * userspace applications. We need to put a wired TLB entry in for each
- * 512MB of reserve32 memory. We only handle double 256MB pages here,
- * so reserve32 must be multiple of 512MB.
- */
- uint32_t size = CONFIG_CAVIUM_RESERVE32;
- uint32_t entrylo0 =
- 0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
- uint32_t entrylo1 = entrylo0 + (256 << 14);
- uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
- while (size >= 512) {
-#if 0
- pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
- smp_processor_id(), entryhi);
-#endif
- add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
- entrylo0 += 512 << 14;
- entrylo1 += 512 << 14;
- entryhi += 512 << 20;
- size -= 512;
- }
-}
-#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
-
-/**
- * Called to release the named block which was used to made sure
- * that nobody used the memory for something else during
- * init. Now we'll free it so userspace apps can use this
- * memory region with bootmem_alloc.
- *
- * This function is called only once from prom_free_prom_memory().
- */
-void octeon_hal_setup_reserved32(void)
-{
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
- on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
-#endif
-}
-
/**
* Reboot Octeon
*
octeon_kill_core(NULL);
}
-#if 0
-/**
- * Platform time init specifics.
- * Returns
- */
-void __init plat_time_init(void)
-{
- /* Nothing special here, but we are required to have one */
-}
-
-#endif
-
/**
* Handle all the error condition interrupts that might occur.
*
* memory when it is getting memory from the
* bootloader. Later, after the memory allocations are
* complete, the reserve32 will be freed.
- */
-#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
- if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
- pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
- "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
- "is set\n");
- else
- addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
- 0, 0, 512 << 20,
- "CAVIUM_RESERVE32", 0);
-#else
- /*
+ *
* Allocate memory for RESERVED32 aligned on 2MB boundary. This
* is in case we later use hugetlb entries with it.
*/
addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
0, 0, 2 << 20,
"CAVIUM_RESERVE32", 0);
-#endif
if (addr < 0)
pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
else
panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
}
#endif
-
- /* This call is here so that it is performed after any TLB
- initializations. It needs to be after these in case the
- CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
- octeon_hal_setup_reserved32();
}
uint32_t avail_coremask;
struct cvmx_bootmem_named_block_desc *block_desc;
-#ifdef CONFIG_CAVIUM_OCTEON_WATCHDOG
- /* Disable the watchdog */
- cvmx_ciu_wdogx_t ciu_wdog;
- ciu_wdog.u64 = cvmx_read_csr(CVMX_CIU_WDOGX(cpu));
- ciu_wdog.s.mode = 0;
- cvmx_write_csr(CVMX_CIU_WDOGX(cpu), ciu_wdog.u64);
-#endif
-
while (per_cpu(cpu_state, cpu) != CPU_DEAD)
cpu_relax();
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Sun May 31 20:17:18 2009
+# Linux kernel version: 2.6.34-rc2
+# Tue Mar 23 10:36:32 2010
#
CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BCM47XX is not set
CONFIG_BCM63XX=y
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_NEC_MARKEINS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
#
# CPU support
#
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
CONFIG_BCM63XX_CPU_6348=y
CONFIG_BCM63XX_CPU_6358=y
CONFIG_BOARD_BCM963XX=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_BIG_ENDIAN=y
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
+
+#
+# Kernel Performance Events And Counters
+#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
CONFIG_PCCARD=y
-# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
#
# Power management options
#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_CFG80211=y
+CONFIG_NL80211_TESTMODE=y
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_BCM63XX_ENET=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
+# CONFIG_ATH_COMMON is not set
+CONFIG_B43=y
+CONFIG_B43_PCI_AUTOSELECT=y
+CONFIG_B43_PCICORE_AUTOSELECT=y
+# CONFIG_B43_PCMCIA is not set
+CONFIG_B43_PIO=y
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_LEDS=y
+# CONFIG_B43_DEBUG is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
# PCI GPIO expanders:
#
+# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
+CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
-# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-# CONFIG_SSB_DRIVER_PCICORE is not set
+CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_MIPS is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
# Display device support
#
-CONFIG_DISPLAY_SUPPORT=y
-
-#
-# Display hardware drivers
-#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_FILE_LOCKING is not set
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=y
+# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul 2 17:02:55 2008
+# Linux kernel version: 2.6.34-rc3
+# Sat Apr 3 16:32:11 2010
#
CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
# CONFIG_SIBYTE_SENTOSA is not set
CONFIG_SIBYTE_BIGSUR=y
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_SIBYTE_BCM1x80=y
CONFIG_SIBYTE_SB1xxx_SOC=y
# CONFIG_CPU_SB1_PASS_1 is not set
# CONFIG_CPU_SB1_PASS_4 is not set
# CONFIG_CPU_SB1_PASS_2_112x is not set
# CONFIG_CPU_SB1_PASS_3 is not set
-# CONFIG_SIMULATION is not set
# CONFIG_SB1_CEX_ALWAYS_FATAL is not set
# CONFIG_SB1_CERR_STALL is not set
-CONFIG_SIBYTE_CFE=y
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
+CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_BCM1480=y
CONFIG_CSRC_BCM1480=y
CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
-CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
CONFIG_CPU_SB1=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
CONFIG_SYS_HAS_CPU_SB1=y
CONFIG_WEAK_ORDERING=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
# CONFIG_SIBYTE_DMA_PAGEOPS is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_4=y
CONFIG_NR_CPUS=4
-# CONFIG_MIPS_CMP is not set
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
CONFIG_ZONE_DMA32=y
# CONFIG_PCCARD is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
+# CONFIG_PM_RUNTIME is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
+CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP_DCCP is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
+CONFIG_SCTP_HMAC_SHA1=y
+# CONFIG_SCTP_HMAC_MD5 is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
+CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+CONFIG_AX25=m
+CONFIG_AX25_DAMA_SLAVE=y
+CONFIG_NETROM=m
+CONFIG_ROSE=m
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+CONFIG_6PACK=m
+CONFIG_BPQETHER=m
+CONFIG_BAYCOM_SER_FDX=m
+CONFIG_BAYCOM_SER_HDX=m
+CONFIG_YAM=m
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+CONFIG_EEPROM_MAX6875=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
-CONFIG_BLK_DEV_IDEFLOPPY=y
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=m
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_BLK_DEV_IDE_SWARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
CONFIG_PATA_SIL680=y
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
+CONFIG_MDIO=m
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
#
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-CONFIG_I2C_SIBYTE=y
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
#
-# Miscellaneous I2C Chip support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-CONFIG_SENSORS_PCF8591=y
-CONFIG_EEPROM_MAX6875=y
-# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_STUB is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
-CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
-# CONFIG_EXT2_FS_POSIX_ACL is not set
-# CONFIG_EXT2_FS_SECURITY is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=m
+CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_EARLY_PRINTK=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SB1XXX_CORELIS is not set
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+# CONFIG_SECURITY_PATH is not set
+CONFIG_LSM_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_PCRYPT is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
-# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_ZLIB=m
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#include <asm/siginfo.h>
struct mips_abi {
- int (* const setup_frame)(struct k_sigaction * ka,
+ int (* const setup_frame)(void *sig_return, struct k_sigaction *ka,
struct pt_regs *regs, int signr,
sigset_t *set);
- int (* const setup_rt_frame)(struct k_sigaction * ka,
+ const unsigned long signal_return_offset;
+ int (* const setup_rt_frame)(void *sig_return, struct k_sigaction *ka,
struct pt_regs *regs, int signr,
sigset_t *set, siginfo_t *info);
+ const unsigned long rt_signal_return_offset;
const unsigned long restart;
};
({ \
__typeof(*(m)) __ret; \
\
- if (kernel_uses_llsc && R10000_LLSC_WAR) { \
+ if (kernel_uses_llsc && R10000_LLSC_WAR) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \
#endif /* CONFIG_64BIT */
+struct pt_regs;
struct task_struct;
extern void elf_dump_regs(elf_greg_t *, struct pt_regs *regs);
#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
#endif
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
#endif /* _ASM_ELF_H */
DECLARE_PER_CPU(struct mips_fpu_emulator_stats, fpuemustats);
#define MIPS_FPU_EMU_INC_STATS(M) \
- cpu_local_wrap(__local_inc(&__get_cpu_var(fpuemustats).M))
+do { \
+ preempt_disable(); \
+ __local_inc(&__get_cpu_var(fpuemustats).M); \
+ preempt_enable(); \
+} while (0)
#else
#define MIPS_FPU_EMU_INC_STATS(M) do { } while (0)
RSET_TIMER,
RSET_WDT,
RSET_UART0,
+ RSET_UART1,
RSET_GPIO,
RSET_SPI,
RSET_UDC0,
#define BCM_6338_TIMER_BASE (0xfffe0200)
#define BCM_6338_WDT_BASE (0xfffe021c)
#define BCM_6338_UART0_BASE (0xfffe0300)
+#define BCM_6338_UART1_BASE (0xdeadbeef)
#define BCM_6338_GPIO_BASE (0xfffe0400)
#define BCM_6338_SPI_BASE (0xfffe0c00)
#define BCM_6338_UDC0_BASE (0xdeadbeef)
#define BCM_6345_TIMER_BASE (0xfffe0200)
#define BCM_6345_WDT_BASE (0xfffe021c)
#define BCM_6345_UART0_BASE (0xfffe0300)
+#define BCM_6345_UART1_BASE (0xdeadbeef)
#define BCM_6345_GPIO_BASE (0xfffe0400)
#define BCM_6345_SPI_BASE (0xdeadbeef)
#define BCM_6345_UDC0_BASE (0xdeadbeef)
#define BCM_6348_TIMER_BASE (0xfffe0200)
#define BCM_6348_WDT_BASE (0xfffe021c)
#define BCM_6348_UART0_BASE (0xfffe0300)
+#define BCM_6348_UART1_BASE (0xdeadbeef)
#define BCM_6348_GPIO_BASE (0xfffe0400)
#define BCM_6348_SPI_BASE (0xfffe0c00)
#define BCM_6348_UDC0_BASE (0xfffe1000)
#define BCM_6358_TIMER_BASE (0xfffe0040)
#define BCM_6358_WDT_BASE (0xfffe005c)
#define BCM_6358_UART0_BASE (0xfffe0100)
+#define BCM_6358_UART1_BASE (0xfffe0120)
#define BCM_6358_GPIO_BASE (0xfffe0080)
#define BCM_6358_SPI_BASE (0xdeadbeef)
#define BCM_6358_UDC0_BASE (0xfffe0800)
return BCM_6338_WDT_BASE;
case RSET_UART0:
return BCM_6338_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6338_UART1_BASE;
case RSET_GPIO:
return BCM_6338_GPIO_BASE;
case RSET_SPI:
return BCM_6345_WDT_BASE;
case RSET_UART0:
return BCM_6345_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6345_UART1_BASE;
case RSET_GPIO:
return BCM_6345_GPIO_BASE;
case RSET_SPI:
return BCM_6348_WDT_BASE;
case RSET_UART0:
return BCM_6348_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6348_UART1_BASE;
case RSET_GPIO:
return BCM_6348_GPIO_BASE;
case RSET_SPI:
return BCM_6358_WDT_BASE;
case RSET_UART0:
return BCM_6358_UART0_BASE;
+ case RSET_UART1:
+ return BCM_6358_UART1_BASE;
case RSET_GPIO:
return BCM_6358_GPIO_BASE;
case RSET_SPI:
enum bcm63xx_irq {
IRQ_TIMER = 0,
IRQ_UART0,
+ IRQ_UART1,
IRQ_DSL,
IRQ_ENET0,
IRQ_ENET1,
*/
#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
+#define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
--- /dev/null
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(unsigned int id);
+
+#endif /* BCM63XX_DEV_UART_H_ */
switch (bcm63xx_get_cpu_id()) {
case BCM6358_CPU_ID:
return 40;
+ case BCM6338_CPU_ID:
+ return 8;
+ case BCM6345_CPU_ID:
+ return 16;
case BCM6348_CPU_ID:
default:
return 37;
unsigned int has_ohci0:1;
unsigned int has_ehci0:1;
unsigned int has_dsp:1;
+ unsigned int has_uart0:1;
+ unsigned int has_uart1:1;
/* ethernet config */
struct bcm63xx_enet_platform_data enet0;
#define cpu_has_smartmips 0
#define cpu_has_vtag_icache 0
-#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345))
+#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
#define cpu_has_dc_aliases 0
#endif
*/
#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
s##_WIN##w##_BASE = (src); \
- s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
+ s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
s##_WIN##w##_MASK = ~(size-1); \
} while (0)
#if defined(CONFIG_SB1_PASS_1_WORKAROUNDS) || \
defined(CONFIG_SB1_PASS_2_WORKAROUNDS)
-#define BCM1250_M3_WAR 1
+#ifndef __ASSEMBLY__
+extern int sb1250_m3_workaround_needed(void);
+#endif
+
+#define BCM1250_M3_WAR sb1250_m3_workaround_needed()
#define SIBYTE_1956_WAR 1
#else
#ifndef __ASM_MMU_H
#define __ASM_MMU_H
-typedef unsigned long mm_context_t[NR_CPUS];
+typedef struct {
+ unsigned long asid[NR_CPUS];
+ void *vdso;
+} mm_context_t;
#endif /* __ASM_MMU_H */
#endif
-#define cpu_context(cpu, mm) ((mm)->context[cpu])
+#define cpu_context(cpu, mm) ((mm)->context.asid[cpu])
#define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK)
#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE)
-#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET)
+#define UNCAC_ADDR(addr) ((addr) - PAGE_OFFSET + UNCAC_BASE + \
+ PHYS_OFFSET)
+#define CAC_ADDR(addr) ((addr) - UNCAC_BASE + PAGE_OFFSET - \
+ PHYS_OFFSET)
#include <asm-generic/memory_model.h>
#include <asm-generic/getorder.h>
#endif
#define FIRST_USER_ADDRESS 0UL
-#define VMALLOC_START MAP_BASE
+/*
+ * TLB refill handlers also map the vmalloc area into xuseg. Avoid
+ * the first couple of pages so NULL pointer dereferences will still
+ * reliably trap.
+ */
+#define VMALLOC_START (MAP_BASE + (2 * PAGE_SIZE))
#define VMALLOC_END \
- (VMALLOC_START + \
+ (MAP_BASE + \
min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
(1UL << cpu_vmbits)) - (1UL << 32))
extern unsigned int vced_count, vcei_count;
+/*
+ * A special page (the vdso) is mapped into all processes at the very
+ * top of the virtual memory space.
+ */
+#define SPECIAL_PAGES_SIZE PAGE_SIZE
+
#ifdef CONFIG_32BIT
/*
* User space process size: 2GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE 0x7fff8000UL
-#define STACK_TOP TASK_SIZE
+#define STACK_TOP ((TASK_SIZE & PAGE_MASK) - SPECIAL_PAGES_SIZE)
/*
* This decides where the kernel will search for a free chunk of vm
#define TASK_SIZE32 0x7fff8000UL
#define TASK_SIZE 0x10000000000UL
#define STACK_TOP \
- (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
+ (((test_thread_flag(TIF_32BIT_ADDR) ? \
+ TASK_SIZE32 : TASK_SIZE) & PAGE_MASK) - SPECIAL_PAGES_SIZE)
/*
* This decides where the kernel will search for a free chunk of vm
extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
-extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
+extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
-static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
+static inline void die_if_kernel(const char *str, struct pt_regs *regs)
{
if (unlikely(!user_mode(regs)))
die(str, regs);
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
+#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
+ /*
+ * Clear BTB (branch target buffer), forbid RAS (return address
+ * stack) to workaround the Out-of-order Issue in Loongson2F
+ * via its diagnostic register.
+ */
+ move k0, ra
+ jal 1f
+ nop
+1: jal 1f
+ nop
+1: jal 1f
+ nop
+1: jal 1f
+ nop
+1: move ra, k0
+ li k0, 3
+ mtc0 k0, $22
+#endif /* CONFIG_CPU_LOONGSON2F */
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(kernelsp)
#else
Ip_u1u2u3(_mfc0);
Ip_u1u2u3(_mtc0);
Ip_u2u1u3(_ori);
+Ip_u3u1u2(_or);
Ip_u2s3u1(_pref);
Ip_0(_rfe);
Ip_u2s3u1(_sc);
Ip_u3u1u2(_xor);
Ip_u2u1u3(_xori);
Ip_u2u1msbu3(_dins);
+Ip_u1(_syscall);
/* Handle labels. */
struct uasm_label {
#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
+static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsrl(p, a1, a2, a3);
+ else
+ uasm_i_dsrl32(p, a1, a2, a3 - 32);
+}
+
+static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
+ unsigned int a2, unsigned int a3)
+{
+ if (a3 < 32)
+ uasm_i_dsll(p, a1, a2, a3);
+ else
+ uasm_i_dsll32(p, a1, a2, a3 - 32);
+}
+
/* Handle relocations. */
struct uasm_reloc {
u32 *addr;
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Cavium Networks
+ */
+
+#ifndef __ASM_VDSO_H
+#define __ASM_VDSO_H
+
+#include <linux/types.h>
+
+
+#ifdef CONFIG_32BIT
+struct mips_vdso {
+ u32 signal_trampoline[2];
+ u32 rt_signal_trampoline[2];
+};
+#else /* !CONFIG_32BIT */
+struct mips_vdso {
+ u32 o32_signal_trampoline[2];
+ u32 o32_rt_signal_trampoline[2];
+ u32 rt_signal_trampoline[2];
+ u32 n32_rt_signal_trampoline[2];
+};
+#endif /* CONFIG_32BIT */
+
+#endif /* __ASM_VDSO_H */
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/spinlock.h>
+#include <linux/gfp.h>
#include <asm/mipsregs.h>
#include <asm/jazz.h>
#include <asm/io.h>
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
- 0, 0, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig_video_page */
- 0, /* orig_video_mode */
- 160, /* orig_video_cols */
- 0, 0, 0, /* unused, ega_bx, unused */
- 64, /* orig_video_lines */
- 0, /* orig_video_isVGA */
- 16 /* orig_video_points */
+ .orig_video_cols = 160,
+ .orig_video_lines = 64,
+ .orig_video_points = 16,
};
#endif
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
ptrace.o reset.o setup.o signal.o syscall.o \
- time.o topology.o traps.o unaligned.o watch.o
+ time.o topology.o traps.o unaligned.o watch.o vdso.o
ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_ftrace.o = -pg
spin_unlock_irqrestore(&loongson2_wait_lock, flags);
}
EXPORT_SYMBOL_GPL(loongson2_cpu_wait);
+
+MODULE_AUTHOR("Yanhua <yanh@lemote.com>");
+MODULE_DESCRIPTION("cpufreq driver for Loongson 2F");
+MODULE_LICENSE("GPL");
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/times.h>
#include <linux/poll.h>
-#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/filter.h>
#include <linux/shm.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ipc.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/scm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/mman.h>
#include <linux/personality.h>
#include <linux/sys.h>
smtc_idle_loop_hook();
#endif
- if (cpu_wait)
+
+ if (cpu_wait) {
+ /* Don't trace irqs off for idle */
+ stop_critical_timings();
(*cpu_wait)();
+ start_critical_timings();
+ }
}
#ifdef CONFIG_HOTPLUG_CPU
if (!cpu_online(cpu) && !cpu_isset(cpu, cpu_callin_map) &&
#include <linux/fs.h>
#include <linux/init.h>
#include <asm/uaccess.h>
-#include <linux/slab.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
#include <linux/elf.h>
*/
extern void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
size_t frame_size);
-/*
- * install trampoline code to get back from the sig handler
- */
-extern int install_sigtramp(unsigned int __user *tramp, unsigned int syscall);
-
/* Check and clear pending FPU exceptions in saved CSR */
extern int fpcsr_pending(unsigned int __user *fpcsr);
#include <asm/ucontext.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
+#include <asm/vdso.h>
#include "signal-common.h"
extern asmlinkage int fpu_emulator_save_context(struct sigcontext __user *sc);
extern asmlinkage int fpu_emulator_restore_context(struct sigcontext __user *sc);
-/*
- * Horribly complicated - with the bloody RM9000 workarounds enabled
- * the signal trampolines is moving to the end of the structure so we can
- * increase the alignment without breaking software compatibility.
- */
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
struct sigframe {
u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_code[2]; /* signal trampoline */
+ u32 sf_pad[2]; /* Was: signal trampoline */
struct sigcontext sf_sc;
sigset_t sf_mask;
};
struct rt_sigframe {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2]; /* signal trampoline */
+ u32 rs_pad[2]; /* Was: signal trampoline */
struct siginfo rs_info;
struct ucontext rs_uc;
};
-#else
-
-struct sigframe {
- u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_pad[2];
- struct sigcontext sf_sc; /* hw context */
- sigset_t sf_mask;
- u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-struct rt_sigframe {
- u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_pad[2];
- struct siginfo rs_info;
- struct ucontext rs_uc;
- u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-#endif
-
/*
* Helper routines
*/
return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
}
-int install_sigtramp(unsigned int __user *tramp, unsigned int syscall)
-{
- int err;
-
- /*
- * Set up the return code ...
- *
- * li v0, __NR__foo_sigreturn
- * syscall
- */
-
- err = __put_user(0x24020000 + syscall, tramp + 0);
- err |= __put_user(0x0000000c , tramp + 1);
- if (ICACHE_REFILLS_WORKAROUND_WAR) {
- err |= __put_user(0, tramp + 2);
- err |= __put_user(0, tramp + 3);
- err |= __put_user(0, tramp + 4);
- err |= __put_user(0, tramp + 5);
- err |= __put_user(0, tramp + 6);
- err |= __put_user(0, tramp + 7);
- }
- flush_cache_sigtramp((unsigned long) tramp);
-
- return err;
-}
-
/*
* Atomically swap in the new signal mask, and wait for a signal.
*/
}
#ifdef CONFIG_TRAD_SIGNALS
-static int setup_frame(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set)
+static int setup_frame(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set)
{
struct sigframe __user *frame;
int err = 0;
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->sf_code, __NR_sigreturn);
-
err |= setup_sigcontext(regs, &frame->sf_sc);
err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
if (err)
regs->regs[ 5] = 0;
regs->regs[ 6] = (unsigned long) &frame->sf_sc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->sf_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
}
#endif
-static int setup_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info)
+static int setup_rt_frame(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set,
+ siginfo_t *info)
{
struct rt_sigframe __user *frame;
int err = 0;
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->rs_code, __NR_rt_sigreturn);
-
/* Create siginfo. */
err |= copy_siginfo_to_user(&frame->rs_info, info);
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->rs_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
struct mips_abi mips_abi = {
#ifdef CONFIG_TRAD_SIGNALS
.setup_frame = setup_frame,
+ .signal_return_offset = offsetof(struct mips_vdso, signal_trampoline),
#endif
.setup_rt_frame = setup_rt_frame,
+ .rt_signal_return_offset =
+ offsetof(struct mips_vdso, rt_signal_trampoline),
.restart = __NR_restart_syscall
};
struct k_sigaction *ka, sigset_t *oldset, struct pt_regs *regs)
{
int ret;
+ struct mips_abi *abi = current->thread.abi;
+ void *vdso = current->mm->context.vdso;
switch(regs->regs[0]) {
case ERESTART_RESTARTBLOCK:
regs->regs[0] = 0; /* Don't deal with this again. */
if (sig_uses_siginfo(ka))
- ret = current->thread.abi->setup_rt_frame(ka, regs, sig, oldset, info);
+ ret = abi->setup_rt_frame(vdso + abi->rt_signal_return_offset,
+ ka, regs, sig, oldset, info);
else
- ret = current->thread.abi->setup_frame(ka, regs, sig, oldset);
+ ret = abi->setup_frame(vdso + abi->signal_return_offset,
+ ka, regs, sig, oldset);
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask);
#include <asm/system.h>
#include <asm/fpu.h>
#include <asm/war.h>
+#include <asm/vdso.h>
#include "signal-common.h"
/*
* Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
*/
-#define __NR_O32_sigreturn 4119
-#define __NR_O32_rt_sigreturn 4193
#define __NR_O32_restart_syscall 4253
/* 32-bit compatibility types */
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
-/*
- * Horribly complicated - with the bloody RM9000 workarounds enabled
- * the signal trampolines is moving to the end of the structure so we can
- * increase the alignment without breaking software compatibility.
- */
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
struct sigframe32 {
u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_code[2]; /* signal trampoline */
+ u32 sf_pad[2]; /* Was: signal trampoline */
struct sigcontext32 sf_sc;
compat_sigset_t sf_mask;
};
struct rt_sigframe32 {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2]; /* signal trampoline */
+ u32 rs_pad[2]; /* Was: signal trampoline */
compat_siginfo_t rs_info;
struct ucontext32 rs_uc;
};
-#else /* ICACHE_REFILLS_WORKAROUND_WAR */
-
-struct sigframe32 {
- u32 sf_ass[4]; /* argument save space for o32 */
- u32 sf_pad[2];
- struct sigcontext32 sf_sc; /* hw context */
- compat_sigset_t sf_mask;
- u32 sf_code[8] ____cacheline_aligned; /* signal trampoline */
-};
-
-struct rt_sigframe32 {
- u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_pad[2];
- compat_siginfo_t rs_info;
- struct ucontext32 rs_uc;
- u32 rs_code[8] __attribute__((aligned(32))); /* signal trampoline */
-};
-
-#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */
-
/*
* sigcontext handlers
*/
force_sig(SIGSEGV, current);
}
-static int setup_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set)
+static int setup_frame_32(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set)
{
struct sigframe32 __user *frame;
int err = 0;
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->sf_code, __NR_O32_sigreturn);
-
err |= setup_sigcontext32(regs, &frame->sf_sc);
err |= __copy_conv_sigset_to_user(&frame->sf_mask, set);
regs->regs[ 5] = 0;
regs->regs[ 6] = (unsigned long) &frame->sf_sc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->sf_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
return -EFAULT;
}
-static int setup_rt_frame_32(struct k_sigaction * ka, struct pt_regs *regs,
- int signr, sigset_t *set, siginfo_t *info)
+static int setup_rt_frame_32(void *sig_return, struct k_sigaction *ka,
+ struct pt_regs *regs, int signr, sigset_t *set,
+ siginfo_t *info)
{
struct rt_sigframe32 __user *frame;
int err = 0;
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- err |= install_sigtramp(frame->rs_code, __NR_O32_rt_sigreturn);
-
/* Convert (siginfo_t -> compat_siginfo_t) and copy to user. */
err |= copy_siginfo_to_user32(&frame->rs_info, info);
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->rs_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
*/
struct mips_abi mips_abi_32 = {
.setup_frame = setup_frame_32,
+ .signal_return_offset =
+ offsetof(struct mips_vdso, o32_signal_trampoline),
.setup_rt_frame = setup_rt_frame_32,
+ .rt_signal_return_offset =
+ offsetof(struct mips_vdso, o32_rt_signal_trampoline),
.restart = __NR_O32_restart_syscall
};
#include <asm/fpu.h>
#include <asm/cpu-features.h>
#include <asm/war.h>
+#include <asm/vdso.h>
#include "signal-common.h"
/*
* Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
*/
-#define __NR_N32_rt_sigreturn 6211
#define __NR_N32_restart_syscall 6214
extern int setup_sigcontext(struct pt_regs *, struct sigcontext __user *);
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
-#if ICACHE_REFILLS_WORKAROUND_WAR == 0
-
-struct rt_sigframe_n32 {
- u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_code[2]; /* signal trampoline */
- struct compat_siginfo rs_info;
- struct ucontextn32 rs_uc;
-};
-
-#else /* ICACHE_REFILLS_WORKAROUND_WAR */
-
struct rt_sigframe_n32 {
u32 rs_ass[4]; /* argument save space for o32 */
- u32 rs_pad[2];
+ u32 rs_pad[2]; /* Was: signal trampoline */
struct compat_siginfo rs_info;
struct ucontextn32 rs_uc;
- u32 rs_code[8] ____cacheline_aligned; /* signal trampoline */
};
-#endif /* !ICACHE_REFILLS_WORKAROUND_WAR */
-
extern void sigset_from_compat(sigset_t *set, compat_sigset_t *compat);
asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs)
force_sig(SIGSEGV, current);
}
-static int setup_rt_frame_n32(struct k_sigaction * ka,
+static int setup_rt_frame_n32(void *sig_return, struct k_sigaction *ka,
struct pt_regs *regs, int signr, sigset_t *set, siginfo_t *info)
{
struct rt_sigframe_n32 __user *frame;
if (!access_ok(VERIFY_WRITE, frame, sizeof (*frame)))
goto give_sigsegv;
- install_sigtramp(frame->rs_code, __NR_N32_rt_sigreturn);
-
/* Create siginfo. */
err |= copy_siginfo_to_user32(&frame->rs_info, info);
regs->regs[ 5] = (unsigned long) &frame->rs_info;
regs->regs[ 6] = (unsigned long) &frame->rs_uc;
regs->regs[29] = (unsigned long) frame;
- regs->regs[31] = (unsigned long) frame->rs_code;
+ regs->regs[31] = (unsigned long) sig_return;
regs->cp0_epc = regs->regs[25] = (unsigned long) ka->sa.sa_handler;
DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
struct mips_abi mips_abi_n32 = {
.setup_rt_frame = setup_rt_frame_n32,
+ .rt_signal_return_offset =
+ offsetof(struct mips_vdso, n32_rt_signal_trampoline),
.restart = __NR_N32_restart_syscall
};
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/ftrace.h>
+#include <linux/slab.h>
#include <asm/cpu.h>
#include <asm/processor.h>
{0, 0, 0, 0, 0, 0, 0, 1}
};
int tcnoprog[NR_CPUS];
-static atomic_t idle_hook_initialized = {0};
+static atomic_t idle_hook_initialized = ATOMIC_INIT(0);
static int clock_hang_reported[NR_CPUS];
#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
#include <linux/string.h>
#include <linux/syscalls.h>
#include <linux/file.h>
-#include <linux/slab.h>
#include <linux/utsname.h>
#include <linux/unistd.h>
#include <linux/sem.h>
#include <linux/module.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <asm/asm.h>
#include <asm/branch.h>
int do_color_align;
unsigned long task_size;
- task_size = STACK_TOP;
+#ifdef CONFIG_32BIT
+ task_size = TASK_SIZE;
+#else /* Must be CONFIG_64BIT*/
+ task_size = test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE;
+#endif
if (len > task_size)
return -ENOMEM;
static DEFINE_SPINLOCK(die_lock);
-void __noreturn die(const char * str, const struct pt_regs * regs)
+void __noreturn die(const char * str, struct pt_regs * regs)
{
static int die_counter;
+ int sig = SIGSEGV;
#ifdef CONFIG_MIPS_MT_SMTC
unsigned long dvpret = dvpe();
#endif /* CONFIG_MIPS_MT_SMTC */
#ifdef CONFIG_MIPS_MT_SMTC
mips_mt_regdump(dvpret);
#endif /* CONFIG_MIPS_MT_SMTC */
+
+ if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
+ sig = 0;
+
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);
panic("Fatal exception");
}
- do_exit(SIGSEGV);
+ do_exit(sig);
}
extern struct exception_table_entry __start___dbe_table[];
void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
unsigned long size)
{
-#ifdef CONFIG_32BIT
- unsigned long uncached_ebase = KSEG1ADDR(ebase);
-#endif
-#ifdef CONFIG_64BIT
- unsigned long uncached_ebase = TO_UNCAC(ebase);
-#endif
+ unsigned long uncached_ebase = CKSEG1ADDR(ebase);
if (!addr)
panic(panic_null_cerr);
ebase = (unsigned long)
__alloc_bootmem(size, 1 << fls(size), 0);
} else {
- ebase = CAC_BASE;
+ ebase = CKSEG0;
if (cpu_has_mips_r2)
ebase += (read_c0_ebase() & 0x3ffff000);
}
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009, 2010 Cavium Networks, Inc.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/binfmts.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/unistd.h>
+
+#include <asm/vdso.h>
+#include <asm/uasm.h>
+
+/*
+ * Including <asm/unistd.h> would give use the 64-bit syscall numbers ...
+ */
+#define __NR_O32_sigreturn 4119
+#define __NR_O32_rt_sigreturn 4193
+#define __NR_N32_rt_sigreturn 6211
+
+static struct page *vdso_page;
+
+static void __init install_trampoline(u32 *tramp, unsigned int sigreturn)
+{
+ uasm_i_addiu(&tramp, 2, 0, sigreturn); /* li v0, sigreturn */
+ uasm_i_syscall(&tramp, 0);
+}
+
+static int __init init_vdso(void)
+{
+ struct mips_vdso *vdso;
+
+ vdso_page = alloc_page(GFP_KERNEL);
+ if (!vdso_page)
+ panic("Cannot allocate vdso");
+
+ vdso = vmap(&vdso_page, 1, 0, PAGE_KERNEL);
+ if (!vdso)
+ panic("Cannot map vdso");
+ clear_page(vdso);
+
+ install_trampoline(vdso->rt_signal_trampoline, __NR_rt_sigreturn);
+#ifdef CONFIG_32BIT
+ install_trampoline(vdso->signal_trampoline, __NR_sigreturn);
+#else
+ install_trampoline(vdso->n32_rt_signal_trampoline,
+ __NR_N32_rt_sigreturn);
+ install_trampoline(vdso->o32_signal_trampoline, __NR_O32_sigreturn);
+ install_trampoline(vdso->o32_rt_signal_trampoline,
+ __NR_O32_rt_sigreturn);
+#endif
+
+ vunmap(vdso);
+
+ pr_notice("init_vdso successfull\n");
+
+ return 0;
+}
+device_initcall(init_vdso);
+
+static unsigned long vdso_addr(unsigned long start)
+{
+ return STACK_TOP;
+}
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ int ret;
+ unsigned long addr;
+ struct mm_struct *mm = current->mm;
+
+ down_write(&mm->mmap_sem);
+
+ addr = vdso_addr(mm->start_stack);
+
+ addr = get_unmapped_area(NULL, addr, PAGE_SIZE, 0, 0);
+ if (IS_ERR_VALUE(addr)) {
+ ret = addr;
+ goto up_fail;
+ }
+
+ ret = install_special_mapping(mm, addr, PAGE_SIZE,
+ VM_READ|VM_EXEC|
+ VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+ VM_ALWAYSDUMP,
+ &vdso_page);
+
+ if (ret)
+ goto up_fail;
+
+ mm->context.vdso = (void *)addr;
+
+up_fail:
+ up_write(&mm->mmap_sem);
+ return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso)
+ return "[vdso]";
+ return NULL;
+}
void __udelay(unsigned long us)
{
- unsigned int lpj = current_cpu_data.udelay_val;
+ unsigned int lpj = raw_current_cpu_data.udelay_val;
__delay((us * 0x000010c7ull * HZ * lpj) >> 32);
}
void __ndelay(unsigned long ns)
{
- unsigned int lpj = current_cpu_data.udelay_val;
+ unsigned int lpj = raw_current_cpu_data.udelay_val;
__delay((ns * 0x00000005ull * HZ * lpj) >> 32);
}
#error I feel sick.
#endif
-typedef union
-{
+typedef union {
struct DWstruct s;
long long ll;
} DWunion;
[MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box",
[MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches",
[MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches",
- [MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches",
+ [MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f",
[MACH_LEMOTE_NAS] "lemote-nas-2f",
[MACH_LEMOTE_LL2F] "lemote-lynloong-2f",
[MACH_LOONGSON_END] NULL,
unsigned long end = offset + size;
if (__uncached_access(file, offset)) {
- if (((uca_start && offset) >= uca_start) &&
+ if (uca_start && (offset >= uca_start) &&
(end <= uca_end))
return __pgprot((pgprot_val(vma_prot) &
~_CACHE_MASK) |
return 0;
for_each_pci_dev(dev) {
- if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
+ if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
r = &dev->resource[idx];
if (!r->start && r->end)
#include <loongson.h>
+static inline void loongson_reboot(void)
+{
+#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
+ ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+#else
+ void (*func)(void);
+
+ func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
+
+ __asm__ __volatile__(
+ " .set noat \n"
+ " jr %[func] \n"
+ " .set at \n"
+ : /* No outputs */
+ : [func] "r" (func));
+#endif
+}
+
static void loongson_restart(char *command)
{
/* do preparation for reboot */
mach_prepare_reboot();
/* reboot via jumping to boot base address */
- ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
+ loongson_reboot();
}
static void loongson_poweroff(void)
conswitchp = &vga_con;
screen_info = (struct screen_info) {
- 0, 25, /* orig-x, orig-y */
- 0, /* unused */
- 0, /* orig-video-page */
- 0, /* orig-video-mode */
- 80, /* orig-video-cols */
- 0, 0, 0, /* ega_ax, ega_bx, ega_cx */
- 25, /* orig-video-lines */
- VIDEO_TYPE_VGAC, /* orig-video-isVGA */
- 16 /* orig-video-points */
+ .orig_x = 0,
+ .orig_y = 25,
+ .orig_video_cols = 80,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = VIDEO_TYPE_VGAC,
+ .orig_video_points = 16,
};
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
if (pending & CAUSEF_IP7)
do_IRQ(LOONGSON_TIMER_IRQ);
else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
-#ifdef CONFIG_OPROFILE
+#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
do_IRQ(LOONGSON2_PERFCNT_IRQ);
#endif
bonito_irqdispatch();
*/
#include <linux/init.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <asm/mips-boards/simint.h>
}
unsigned long _page_cachable_default;
-EXPORT_SYMBOL_GPL(_page_cachable_default);
+EXPORT_SYMBOL(_page_cachable_default);
static inline void setup_protection_map(void)
{
#include <linux/module.h>
#include <linux/scatterlist.h>
#include <linux/string.h>
+#include <linux/gfp.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
#include <linux/proc_fs.h>
#include <linux/pfn.h>
#include <linux/hardirq.h>
+#include <linux/gfp.h>
#include <asm/asm-offsets.h>
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
#include <asm/byteorder.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm/war.h>
#include <asm/uasm.h>
+/*
+ * TLB load/store/modify handlers.
+ *
+ * Only the fastpath gets synthesized at runtime, the slowpath for
+ * do_page_fault remains normal asm.
+ */
+extern void tlb_do_page_fault_0(void);
+extern void tlb_do_page_fault_1(void);
+
+
static inline int r45k_bvahwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
label_nopage_tlbm,
label_smp_pgtable_change,
label_r3000_write_probe_fail,
+ label_large_segbits_fault,
#ifdef CONFIG_HUGETLB_PAGE
label_tlb_huge_update,
#endif
UASM_L_LA(_nopage_tlbm)
UASM_L_LA(_smp_pgtable_change)
UASM_L_LA(_r3000_write_probe_fail)
+UASM_L_LA(_large_segbits_fault)
#ifdef CONFIG_HUGETLB_PAGE
UASM_L_LA(_tlb_huge_update)
#endif
static struct uasm_label labels[128] __cpuinitdata;
static struct uasm_reloc relocs[128] __cpuinitdata;
+#ifdef CONFIG_64BIT
+static int check_for_high_segbits __cpuinitdata;
+#endif
+
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
/*
* CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
} else {
#ifdef CONFIG_64BIT_PHYS_ADDR
- uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL));
+ uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
#else
UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
#endif
* The vmalloc handling is not in the hotpath.
*/
uasm_i_dmfc0(p, tmp, C0_BADVADDR);
- uasm_il_bltz(p, r, tmp, label_vmalloc);
+
+ if (check_for_high_segbits) {
+ /*
+ * The kernel currently implicitely assumes that the
+ * MIPS SEGBITS parameter for the processor is
+ * (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
+ * allocate virtual addresses outside the maximum
+ * range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But
+ * that doesn't prevent user code from accessing the
+ * higher xuseg addresses. Here, we make sure that
+ * everything but the lower xuseg addresses goes down
+ * the module_alloc/vmalloc path.
+ */
+ uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+ uasm_il_bnez(p, r, ptr, label_vmalloc);
+ } else {
+ uasm_il_bltz(p, r, tmp, label_vmalloc);
+ }
/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
* SMTC uses TCBind value as "CPU" index
*/
uasm_i_mfc0(p, ptr, C0_TCBIND);
- uasm_i_dsrl(p, ptr, ptr, 19);
+ uasm_i_dsrl_safe(p, ptr, ptr, 19);
# else
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
uasm_i_dmfc0(p, ptr, C0_CONTEXT);
- uasm_i_dsrl(p, ptr, ptr, 23);
+ uasm_i_dsrl_safe(p, ptr, ptr, 23);
# endif
UASM_i_LA_mostly(p, tmp, pgdc);
uasm_i_daddu(p, ptr, ptr, tmp);
uasm_l_vmalloc_done(l, *p);
- if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */
- uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
- else
- uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
+ /* get pgd offset in bytes */
+ uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3);
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
#ifndef __PAGETABLE_PMD_FOLDED
uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
- uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
+ uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
#endif
}
+enum vmalloc64_mode {not_refill, refill};
/*
* BVADDR is the faulting address, PTR is scratch.
* PTR will hold the pgd for vmalloc.
*/
static void __cpuinit
build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
- unsigned int bvaddr, unsigned int ptr)
+ unsigned int bvaddr, unsigned int ptr,
+ enum vmalloc64_mode mode)
{
long swpd = (long)swapper_pg_dir;
+ int single_insn_swpd;
+ int did_vmalloc_branch = 0;
+
+ single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd);
uasm_l_vmalloc(l, *p);
- if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
- uasm_il_b(p, r, label_vmalloc_done);
- uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
- } else {
- UASM_i_LA_mostly(p, ptr, swpd);
- uasm_il_b(p, r, label_vmalloc_done);
- if (uasm_in_compat_space_p(swpd))
- uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
- else
- uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+ if (mode == refill && check_for_high_segbits) {
+ if (single_insn_swpd) {
+ uasm_il_bltz(p, r, bvaddr, label_vmalloc_done);
+ uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+ did_vmalloc_branch = 1;
+ /* fall through */
+ } else {
+ uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault);
+ }
+ }
+ if (!did_vmalloc_branch) {
+ if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
+ uasm_il_b(p, r, label_vmalloc_done);
+ uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
+ } else {
+ UASM_i_LA_mostly(p, ptr, swpd);
+ uasm_il_b(p, r, label_vmalloc_done);
+ if (uasm_in_compat_space_p(swpd))
+ uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
+ else
+ uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
+ }
+ }
+ if (mode == refill && check_for_high_segbits) {
+ uasm_l_large_segbits_fault(l, *p);
+ /*
+ * We get here if we are an xsseg address, or if we are
+ * an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
+ *
+ * Ignoring xsseg (assume disabled so would generate
+ * (address errors?), the only remaining possibility
+ * is the upper xuseg addresses. On processors with
+ * TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these
+ * addresses would have taken an address error. We try
+ * to mimic that here by taking a load/istream page
+ * fault.
+ */
+ UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
+ uasm_i_jr(p, ptr);
+ uasm_i_nop(p);
}
}
UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
} else {
- uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
+ uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
- uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
+ uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
}
UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
} else {
* create the plain linear handler
*/
if (bcm1250_m3_war()) {
- UASM_i_MFC0(&p, K0, C0_BADVADDR);
- UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+ unsigned int segbits = 44;
+
+ uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+ uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+ uasm_i_dsrl_safe(&p, K1, K0, 62);
+ uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+ uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
+ uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
}
#endif
#ifdef CONFIG_64BIT
- build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
+ build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill);
#endif
/*
dump_handler((u32 *)ebase, 64);
}
-/*
- * TLB load/store/modify handlers.
- *
- * Only the fastpath gets synthesized at runtime, the slowpath for
- * do_page_fault remains normal asm.
- */
-extern void tlb_do_page_fault_0(void);
-extern void tlb_do_page_fault_1(void);
-
/*
* 128 instructions for the fastpath handler is generous and should
* never be exceeded.
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
- build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
+ build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill);
#endif
}
memset(relocs, 0, sizeof(relocs));
if (bcm1250_m3_war()) {
- UASM_i_MFC0(&p, K0, C0_BADVADDR);
- UASM_i_MFC0(&p, K1, C0_ENTRYHI);
+ unsigned int segbits = 44;
+
+ uasm_i_dmfc0(&p, K0, C0_BADVADDR);
+ uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
- UASM_i_SRL(&p, K0, K0, PAGE_SHIFT + 1);
+ uasm_i_dsrl_safe(&p, K1, K0, 62);
+ uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
+ uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
+ uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
}
*/
static int run_once = 0;
+#ifdef CONFIG_64BIT
+ check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
+#endif
+
switch (current_cpu_type()) {
case CPU_R2000:
case CPU_R3000:
BIMM = 0x040,
JIMM = 0x080,
FUNC = 0x100,
- SET = 0x200
+ SET = 0x200,
+ SCIMM = 0x400
};
#define OP_MASK 0x3f
#define FUNC_SH 0
#define SET_MASK 0x7
#define SET_SH 0
+#define SCIMM_MASK 0xfffff
+#define SCIMM_SH 6
enum opcode {
insn_invalid,
insn_dmtc0, insn_dsll, insn_dsll32, insn_dsra, insn_dsrl,
insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal,
insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0,
- insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
+ insn_mtc0, insn_or, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd,
insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw,
insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori,
- insn_dins
+ insn_dins, insn_syscall
};
struct insn {
{ insn_lw, M(lw_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_mfc0, M(cop0_op, mfc_op, 0, 0, 0, 0), RT | RD | SET},
{ insn_mtc0, M(cop0_op, mtc_op, 0, 0, 0, 0), RT | RD | SET},
+ { insn_or, M(spec_op, 0, 0, 0, 0, or_op), RS | RT | RD },
{ insn_ori, M(ori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_pref, M(pref_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_rfe, M(cop0_op, cop_op, 0, 0, 0, rfe_op), 0 },
{ insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD },
{ insn_xori, M(xori_op, 0, 0, 0, 0, 0), RS | RT | UIMM },
{ insn_dins, M(spec3_op, 0, 0, 0, 0, dins_op), RS | RT | RD | RE },
+ { insn_syscall, M(spec_op, 0, 0, 0, 0, syscall_op), SCIMM},
{ insn_invalid, 0, 0 }
};
return (arg >> 2) & JIMM_MASK;
}
+static inline __cpuinit u32 build_scimm(u32 arg)
+{
+ if (arg & ~SCIMM_MASK)
+ printk(KERN_WARNING "Micro-assembler field overflow\n");
+
+ return (arg & SCIMM_MASK) << SCIMM_SH;
+}
+
static inline __cpuinit u32 build_func(u32 arg)
{
if (arg & ~FUNC_MASK)
op |= build_func(va_arg(ap, u32));
if (ip->fields & SET)
op |= build_set(va_arg(ap, u32));
+ if (ip->fields & SCIMM)
+ op |= build_scimm(va_arg(ap, u32));
va_end(ap);
**buf = op;
I_u1u2u3(_mfc0)
I_u1u2u3(_mtc0)
I_u2u1u3(_ori)
+I_u3u1u2(_or)
I_u2s3u1(_pref)
I_0(_rfe)
I_u2s3u1(_sc)
I_u3u1u2(_xor)
I_u2u1u3(_xori)
I_u2u1msbu3(_dins);
+I_u1(_syscall);
/* Handle labels. */
void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/smp.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel_stat.h>
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/slab.h>
#include <linux/reboot.h>
#include <pnx833x.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/random.h>
#include <linux/proc_fs.h>
#include <linux/irq.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/random.h>
* Reset the PNX8550 board.
*
*/
-#include <linux/slab.h>
+#include <linux/kernel.h>
+
#include <asm/reboot.h>
#include <glb.h>
};
#ifdef CONFIG_CS5536
+DEFINE_RAW_SPINLOCK(msr_lock);
+
void _rdmsr(u32 msr, u32 *hi, u32 *lo)
{
struct pci_bus bus = {
.number = PCI_BUS_CS5536
};
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&msr_lock, flags);
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+ raw_spin_unlock_irqrestore(&msr_lock, flags);
}
EXPORT_SYMBOL(_rdmsr);
.number = PCI_BUS_CS5536
};
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&msr_lock, flags);
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
+ raw_spin_unlock_irqrestore(&msr_lock, flags);
}
EXPORT_SYMBOL(_wrmsr);
#endif
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/tty.h>
+#include <linux/vt.h>
#include <asm/io.h>
* XXX ehs: Should this happen in PCI Device mode?
*/
io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
- sb1250_controller.io_map_base = io_map_base;
+ sb1250_controller.io_map_base = (unsigned long)io_map_base;
set_io_port_base((unsigned long)io_map_base);
#ifdef CONFIG_SIBYTE_HAS_LDT
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <asm/pci.h>
#include <asm/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/bitops.h>
#include <asm/bootinfo.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <asm/page.h>
#include <linux/swap.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/delay.h>
void ip22_be_interrupt(int irq)
{
const int field = 2 * sizeof(unsigned long);
- const struct pt_regs *regs = get_irq_regs();
+ struct pt_regs *regs = get_irq_regs();
save_and_clear_buserr();
print_buserr();
void ip22_be_interrupt(int irq)
{
- const struct pt_regs *regs = get_irq_regs();
+ struct pt_regs *regs = get_irq_regs();
count_be_interrupt++;
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/random.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/bitops.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/kernel_stat.h>
#include <asm/errno.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/smp.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/kernel_stat.h>
#include <asm/errno.h>
return ret;
}
+int sb1250_m3_workaround_needed(void)
+{
+ switch (soc_type) {
+ case K_SYS_SOC_TYPE_BCM1250:
+ case K_SYS_SOC_TYPE_BCM1250_ALT:
+ case K_SYS_SOC_TYPE_BCM1250_ALT2:
+ case K_SYS_SOC_TYPE_BCM1125:
+ case K_SYS_SOC_TYPE_BCM1125H:
+ return soc_pass < K_SYS_REVISION_BCM1250_C0;
+
+ default:
+ return 0;
+ }
+}
+
static int __init setup_bcm112x(void)
{
int ret = 0;
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
- 0, 0, /* orig-x, orig-y */
- 0, /* unused */
- 52, /* orig_video_page */
- 3, /* orig_video_mode */
- 80, /* orig_video_cols */
- 4626, 3, 9, /* unused, ega_bx, unused */
- 25, /* orig_video_lines */
- 0x22, /* orig_video_isVGA */
- 16 /* orig_video_points */
+ .orig_video_page = 52,
+ .orig_video_mode = 3,
+ .orig_video_cols = 80,
+ .flags = 12,
+ .orig_video_ega_bx = 3,
+ .orig_video_lines = 25,
+ .orig_video_isVGA = 0x22,
+ .orig_video_points = 16,
};
/* XXXKW for CFE, get lines/cols from environment */
#endif
#include <asm/txx9/pci.h>
#ifdef CONFIG_TOSHIBA_FPCIB0
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <asm/i8259.h>
#include <asm/txx9/smsc_fdc37m81x.h>
#endif
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/sysdev.h>
+#include <linux/slab.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/reboot.h>
* Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/percpu.h>
#include <linux/err.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <asm/io.h>
static unsigned long pci_sram_allocated = 0xbc000000;
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/highmem.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/spinlock.h>
#include <linux/quicklist.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/io.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/file.h>
-#include <linux/slab.h>
#include <linux/ptrace.h>
+#include <linux/slab.h>
#include <asm/errno.h>
#include <asm/uaccess.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/slab.h>
#include <asm/unwind.h>
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/scatterlist.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <asm/io.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/kallsyms.h>
*/
#include <linux/compat.h>
-#include <linux/slab.h>
#include <linux/module.h>
#include <linux/unistd.h>
#include <linux/init.h>
*/
#include <linux/types.h>
#include <linux/spinlock.h>
-#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h> /* for hppa_dma_ops and pcxl_dma_ops */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:14 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:38 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:14 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:39 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
#
# TI VLYNQ
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:15 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:40 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:16 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:40 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:17 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:41 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:18 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:42 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_CB710 is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:19 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:43 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:20 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:44 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:21 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:45 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:21 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:46 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:23 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:47 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:22 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:47 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:24 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:48 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:25 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:49 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:26 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:50 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:27 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:51 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:28 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:52 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:53 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:29 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:54 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:30 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:54 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:31 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:55 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:32 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:56 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
CONFIG_AGP=m
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:33 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:57 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:34 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:58 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:35 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:59 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:00 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:36 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:01 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:37 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:01 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=y
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:43 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:07 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
-# CONFIG_ME4000 is not set
-# CONFIG_MEILHAUS is not set
# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
-# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_INPUT_MIMIO is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192E is not set
# CONFIG_TRANZPORT is not set
-#
-# Android
-#
-# CONFIG_ANDROID is not set
-# CONFIG_DST is not set
-# CONFIG_POHMELFS is not set
-# CONFIG_B3DFG is not set
-# CONFIG_IDE_PHISON is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_HECI is not set
-# CONFIG_USB_CPC is not set
-
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
-# CONFIG_HYPERV_STORAGE is not set
-# CONFIG_HYPERV_BLOCK is not set
-# CONFIG_HYPERV_NET is not set
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_IDE_PHISON is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
CONFIG_VME_BUS=y
#
# VME Bridge Drivers
#
+# CONFIG_VME_CA91CX42 is not set
CONFIG_VME_TSI148=y
#
#
# CONFIG_VME_USER is not set
+#
+# VME Board Drivers
+#
+# CONFIG_VMIVME_7805 is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
+
#
# File systems
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:41 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:05 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:42 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:06 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_DS1682=y
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_USB_GADGET is not set
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
-# CONFIG_ME4000 is not set
-# CONFIG_MEILHAUS is not set
# CONFIG_USB_IP_COMMON is not set
+# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
-# CONFIG_ALTERA_PCIE_CHDMA is not set
-# CONFIG_INPUT_MIMIO is not set
+# CONFIG_R8187SE is not set
+# CONFIG_RTL8192SU is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8192E is not set
# CONFIG_TRANZPORT is not set
#
-# Android
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
#
-# CONFIG_ANDROID is not set
-# CONFIG_DST is not set
+# CONFIG_INPUT_GPIO is not set
# CONFIG_POHMELFS is not set
-# CONFIG_B3DFG is not set
# CONFIG_IDE_PHISON is not set
-# CONFIG_PLAN9AUTH is not set
-# CONFIG_HECI is not set
# CONFIG_VT6655 is not set
-# CONFIG_USB_CPC is not set
-# CONFIG_RDC_17F3101X is not set
+# CONFIG_VT6656 is not set
CONFIG_VME_BUS=y
#
#
# CONFIG_VME_USER is not set
+#
+# VME Board Drivers
+#
+# CONFIG_VMIVME_7805 is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+# CONFIG_RAMZSWAP is not set
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_STRIP is not set
+# CONFIG_DT3155 is not set
+# CONFIG_CRYSTALHD is not set
+
#
# File systems
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:39 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:03 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:40 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:04 2010
#
# CONFIG_PPC64 is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:38 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:17:02 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:23:58 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:22 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:23:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:23 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
-CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
+# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=m
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=m
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MV64XXX=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
-# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
-# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
# CONFIG_USB_CXACRU is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:23:59 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:24 2010
#
# CONFIG_PPC64 is not set
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:00 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:24 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:01 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:25 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_HAS_IOMEM=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:02 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:26 2010
#
# CONFIG_PPC64 is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
#
# CONFIG_ISA is not set
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:03 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:27 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:04 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:28 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:05 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:29 2010
#
# CONFIG_PPC64 is not set
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:06 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:30 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:06 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:31 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:07 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:31 2010
#
# CONFIG_PPC64 is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_PPC_ADV_DEBUG_REGS=y
+CONFIG_PPC_ADV_DEBUG_IACS=2
+CONFIG_PPC_ADV_DEBUG_DACS=2
+CONFIG_PPC_ADV_DEBUG_DVCS=0
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_SERIAL_QE=m
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
#
# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
+# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:08 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:32 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:09 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:33 2010
#
# CONFIG_PPC64 is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_SND_PPC=y
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
CONFIG_VXFS_FS=m
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:10 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:34 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:11 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:35 2010
#
# CONFIG_PPC64 is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_MDIO=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
#
# Caches
#
+# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:12 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:36 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MV64XXX=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
+# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
+CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
+# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Mon Aug 24 17:38:50 2009
+# Linux kernel version: 2.6.34-rc4
+# Thu Apr 15 11:32:15 2010
#
CONFIG_PPC64=y
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
+# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_GENERIC_BUG=y
CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
#
CONFIG_SPU_FS=m
CONFIG_SPU_FS_64K_LS=y
-# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_SPARSE_IRQ=y
# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
CONFIG_PM_DEBUG=y
+# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_VERBOSE is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_LEDS is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_NETDEV_1000=y
CONFIG_GELIC_NET=y
CONFIG_GELIC_WIRELESS=y
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
+CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
-# CONFIG_HOSTAP is not set
+# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
+# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=m
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=m
+# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
-# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_BINARY_PRINTF=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
-CONFIG_EVENT_TRACING=y
-CONFIG_CONTEXT_SWITCH_TRACER=y
-CONFIG_TRACING=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc3
-# Wed Jan 6 09:24:13 2010
+# Linux kernel version: 2.6.34-rc5
+# Mon Apr 19 23:16:37 2010
#
# CONFIG_PPC64 is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# Bus options
#
CONFIG_ZONE_DMA=y
+# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# Networking options
#
CONFIG_PACKET=m
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
#define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh)
#define PPC_STLCX stringify_in_c(stdcx.)
#define PPC_CNTLZL stringify_in_c(cntlzd)
+#define PPC_LR_STKOFF 16
/* Move to CR, single-entry optimized version. Only available
* on POWER4 and later.
#define PPC_STLCX stringify_in_c(stwcx.)
#define PPC_CNTLZL stringify_in_c(cntlzw)
#define PPC_MTOCRF stringify_in_c(mtcrf)
+#define PPC_LR_STKOFF 4
#endif
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - MEMORY_START))
+/*
+ * On Book-E parts we need __va to parse the device tree and we can't
+ * determine MEMORY_START until then. However we can determine PHYSICAL_START
+ * from information at hand (program counter, TLB lookup).
+ *
+ * On non-Book-E PPC64 PAGE_OFFSET and MEMORY_START are constants so use
+ * the other definitions for __va & __pa.
+ */
+#ifdef CONFIG_BOOKE
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+#else
+#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START))
#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START)
+#endif
/*
* Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/percpu.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include "cacheinfo.h"
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
+#include <linux/gfp.h>
#include <linux/lmb.h>
#include <asm/bug.h>
#include <asm/abs_addr.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <linux/of_platform.h>
#include <asm/ibmebus.h>
#include <asm/abs_addr.h>
#include <linux/preempt.h>
#include <linux/module.h>
#include <linux/kdebug.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/sstep.h>
#include <asm/uaccess.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/lppaca.h>
_GLOBAL(__restore_cpu_power7)
/* place holder */
blr
+
+/*
+ * Get a minimal set of registers for our caller's nth caller.
+ * r3 = regs pointer, r5 = n.
+ *
+ * We only get R1 (stack pointer), NIP (next instruction pointer)
+ * and LR (link register). These are all we can get in the
+ * general case without doing complicated stack unwinding, but
+ * fortunately they are enough to do a stack backtrace, which
+ * is all we need them for.
+ */
+_GLOBAL(perf_arch_fetch_caller_regs)
+ mr r6,r1
+ cmpwi r5,0
+ mflr r4
+ ble 2f
+ mtctr r5
+1: PPC_LL r6,0(r6)
+ bdnz 1b
+ PPC_LL r4,PPC_LR_STKOFF(r6)
+2: PPC_LL r7,0(r6)
+ PPC_LL r7,PPC_LR_STKOFF(r7)
+ PPC_STL r6,GPR1-STACK_FRAME_OVERHEAD(r3)
+ PPC_STL r4,_NIP-STACK_FRAME_OVERHEAD(r3)
+ PPC_STL r7,_LINK-STACK_FRAME_OVERHEAD(r3)
+ blr
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/syscalls.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <linux/irq.h>
#include <linux/list.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/proc_fs.h>
-#include <linux/slab.h>
#include <linux/kernel.h>
#include <asm/machdep.h>
#else
#define OV5_CMO 0x00
#endif
+#define OV5_TYPE1_AFFINITY 0x80 /* Type 1 NUMA affinity */
/* Option Vector 6: IBM PAPR hints */
#define OV6_LINUX 0x02 /* Linux is our OS */
OV5_DONATE_DEDICATE_CPU | OV5_MSI,
0,
OV5_CMO,
- 0,
+ OV5_TYPE1_AFFINITY,
0,
0,
0,
#include <linux/completion.h>
#include <linux/cpumask.h>
#include <linux/lmb.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
#include <linux/spinlock.h>
#include <linux/cpu.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/smp.h>
#include <linux/unistd.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/smp.h>
#include <asm/time.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/elf.h>
#include <linux/ipc.h>
+#include <linux/slab.h>
#include <asm/ptrace.h>
#include <asm/types.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/mm.h>
*/
#include <linux/kvm_host.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <asm/reg.h>
#include <asm/kvm_ppc.h>
#include <asm/kvm_book3s.h>
#include <asm/mmu_context.h>
+#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
struct kvm_vcpu *vcpu;
ulong ga, ga_end;
int is_dirty = 0;
- int r, n;
+ int r;
+ unsigned long n;
mutex_lock(&kvm->slots_lock);
kvm_for_each_vcpu(n, vcpu, kvm)
kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/kvm_host.h>
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
*/
#include <linux/kvm_host.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <asm/reg.h>
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/kvm.h>
#include <linux/kvm_host.h>
#include <linux/vmalloc.h>
#include <linux/hrtimer.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <asm/cputable.h>
#include <asm/uaccess.h>
#include <asm/kvm_ppc.h>
*/
#include <linux/device.h> /* devres_*(), devm_ioremap_release() */
+#include <linux/gfp.h>
#include <linux/io.h> /* ioremap_flags() */
#include <linux/module.h> /* EXPORT_SYMBOL() */
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
- if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
asm volatile("isync;tlbwe;isync" : : : "memory");
TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
- if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ if (mmu_has_feature(MMU_FTR_BIG_PHYS))
TLBCAM[index].MAS7 = (u64)phys >> 32;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
if (flags & _PAGE_USER) {
TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
}
-#else
- TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR;
- TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0);
-#endif
tlbcam_addrs[index].start = virt;
tlbcam_addrs[index].limit = virt + size - 1;
#include <linux/mm.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/hugetlb.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/lmb.h>
+#include <linux/gfp.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <linux/poison.h>
#include <linux/lmb.h>
#include <linux/hugetlb.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/gfp.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <asm/mmu_context.h>
#include <linux/bootmem.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
+#include <linux/slab.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
*/
static int __init find_min_common_depth(void)
{
- int depth;
+ int depth, index;
const unsigned int *ref_points;
struct device_node *rtas_root;
unsigned int len;
+ struct device_node *options;
rtas_root = of_find_node_by_path("/rtas");
* configuration (should be all 0's) and the second is for a normal
* NUMA configuration.
*/
+ index = 1;
ref_points = of_get_property(rtas_root,
"ibm,associativity-reference-points", &len);
+ /*
+ * For type 1 affinity information we want the first field
+ */
+ options = of_find_node_by_path("/options");
+ if (options) {
+ const char *str;
+ str = of_get_property(options, "ibm,associativity-form", NULL);
+ if (str && !strcmp(str, "1"))
+ index = 0;
+ }
+
if ((len >= 2 * sizeof(unsigned int)) && ref_points) {
- depth = ref_points[1];
+ depth = ref_points[index];
} else {
dbg("NUMA: ibm,associativity-reference-points not found.\n");
depth = -1;
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/lmb.h>
+#include <linux/slab.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/lmb.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/gfp.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/notifier.h>
#include <linux/numa.h>
#include <linux/oprofile.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include "pr_util.h"
#include <linux/string.h>
#include <linux/uaccess.h>
#include <linux/elf.h>
+#include <linux/slab.h>
#include "pr_util.h"
#include <linux/delay.h>
#include <linux/of_gpio.h>
#include <linux/of_i2c.h>
+#include <linux/slab.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <linux/of.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/watchdog.h>
#include <linux/miscdevice.h>
#include <linux/uaccess.h>
if (rc)
goto err_bcom_rx_irq;
+ lpbfifo.dma_irqs_enabled = 1;
+
/* Request the Bestcomm transmit (memory --> fifo) task and IRQ */
lpbfifo.bcom_tx_task =
bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA,
#include <linux/fsl_devices.h>
#include <linux/mdio-bitbang.h>
#include <linux/of_mdio.h>
+#include <linux/slab.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/machdep.h>
bool "Freescale MPC85xx DS"
select PPC_I8259
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
select SWIOTLB
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
bool "Freescale MPC85xx RDB"
select PPC_I8259
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
select SWIOTLB
help
This option enables support for the MPC85xx RDB (P2020 RDB) board
bool "Freescale MPC8641 HPCN"
select PPC_I8259
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
select HAS_RAPIDIO
select SWIOTLB
help
config MPC8610_HPCD
bool "Freescale MPC8610 HPCD"
select DEFAULT_UIMAGE
- select FSL_ULI1575
+ select FSL_ULI1575 if PCI
help
This option enables support for the MPC8610 HPCD board.
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#define GEF_GPIO_DIRECT 0x00
#define GEF_GPIO_IN 0x04
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/msi.h>
#include <linux/of_platform.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <asm/dcr.h>
#include <asm/machdep.h>
#include <linux/pci_regs.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <linux/lmb.h>
#include <asm/prom.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/reboot.h>
#include <linux/kexec.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <asm/ppc-pci.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/io.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/syscalls.h>
#include <linux/poll.h>
#include <linux/ptrace.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/time.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/spu.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/vmalloc.h>
#include <linux/smp.h>
#include <linux/module.h>
#include <linux/mount.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <asm/prom.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/iommu.h>
#include <asm/vio.h>
#include <linux/dma-mapping.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#include <asm/time.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
*/
#include <linux/of.h>
#include <linux/init.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
*/
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/string.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/of.h>
#include <asm/pasemi_dma.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/pci.h>
#include <linux/of_platform.h>
+#include <linux/gfp.h>
#include <asm/prom.h>
#include <asm/system.h>
#include <linux/sched.h>
#include <linux/adb.h>
#include <linux/pmu.h>
-#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/timer.h>
#include <linux/mutex.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <asm/keylargo.h>
#include <asm/uninorth.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/nvram.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/adb.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/reboot.h>
#include <asm/firmware.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
#include <linux/lmb.h>
+#include <linux/slab.h>
#include <asm/cell-regs.h>
#include <asm/firmware.h>
#include <linux/ctype.h>
#include <linux/lmb.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mmzone.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/cpu.h>
+#include <linux/slab.h>
#include "offline_states.h"
#include <asm/prom.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/debugfs.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <linux/list.h>
#include <linux/pci.h>
#include <linux/rbtree.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/atomic.h>
#include <asm/pci-bridge.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <asm/eeh_event.h>
#include <asm/ppc-pci.h>
#include <linux/of.h>
#include <linux/lmb.h>
+#include <linux/vmalloc.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
*/
start = (unsigned long)__va(base);
ret = remove_section_mapping(start, start + lmb_size);
+
+ /* Ensure all vmalloc mappings are flushed in case they also
+ * hit that section of memory
+ */
+ vm_unmap_aliases();
+
return ret;
}
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
*
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kobject.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/random.h>
#include <linux/kref.h>
#include <linux/notifier.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/rtas.h>
#include <asm/prom.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/major.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/8xx_immap.h>
return -EINVAL;
}
- if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX)
- shift += 3;
-
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
bits <<= shift;
mask <<= shift;
+
+ if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
+ if (mode == CPM_CLK_RTX) {
+ bits |= bits << 3;
+ mask |= mask << 3;
+ } else if (mode == CPM_CLK_RX) {
+ bits <<= 3;
+ mask <<= 3;
+ }
+ }
+
out_be32(reg, (in_be32(reg) & ~mask) | bits);
return 0;
return -EINVAL;
}
- if (mode == CPM_CLK_RX)
- shift += 3;
-
for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
if (clk_map[i][0] == target && clk_map[i][1] == clock) {
bits = clk_map[i][2];
bits <<= shift;
mask <<= shift;
+ if (mode == CPM_CLK_RTX) {
+ bits |= bits << 3;
+ mask |= mask << 3;
+ } else if (mode == CPM_CLK_RX) {
+ bits <<= 3;
+ mask <<= 3;
+ }
+
out_be32(reg, (in_be32(reg) & ~mask) | bits);
cpm2_unmap(im_cpmux);
#include <linux/of_device.h>
#include <linux/spinlock.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <asm/udbg.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
#include <linux/lmb.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <linux/of.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/fsl_gtm.h>
#define GTCFR_STP(x) ((x) & 1 ? 1 << 5 : 1 << 1)
#include <linux/bootmem.h>
#include <linux/msi.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
#include <asm/prom.h>
#include <linux/bootmem.h>
#include <linux/lmb.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#define MPC8XXX_GPIO_PINS 32
#include <linux/bootmem.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <asm/ptrace.h>
#include <asm/signal.h>
*
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/bitmap.h>
#include <asm/msi_bitmap.h>
#include <linux/of.h>
#include <linux/init.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
static __initdata struct {
const char *compatible;
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/types.h>
+#include <linux/slab.h>
#define GPIO_MASK(gpio) (0x80000000 >> (gpio))
#define GPIO_MASK2(gpio) (0xc0000000 >> ((gpio) * 2))
#include <linux/of.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/pci-bridge.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <asm/qe.h>
struct qe_gpio_chip {
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include "simple_gpio.h"
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
#include <linux/pagemap.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
#include <linux/netdevice.h>
/* Symbols defined by linker scripts */
extern char input_data[];
extern int input_len;
-extern int _text;
-extern int _end;
+extern char _text, _end;
+extern char _bss, _ebss;
static void error(char *m);
unsigned long output_addr;
unsigned char *output;
+ check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
+ memset(&_bss, 0, &_ebss - &_bss);
free_mem_ptr = (unsigned long)&_end;
free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL);
- check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start);
-
#ifdef CONFIG_BLK_DEV_INITRD
/*
* Move the initrd right behind the end of the decompressed
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan 4 09:03:07 2010
+# Linux kernel version: 2.6.34-rc3
+# Fri Apr 9 09:57:10 2010
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_NO_IOMEM=y
CONFIG_NO_DMA=y
CONFIG_GENERIC_LOCKBREAK=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
#
CONFIG_SMP=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
+# CONFIG_SCHED_BOOK is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_AUDIT_ARCH=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
+CONFIG_PM_OPS=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_DMA is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_KPROBE_EVENT=y
+# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SAMPLES=y
+# CONFIG_SAMPLE_TRACEPOINTS is not set
+# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
#
# Security options
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_AES_S390 is not set
CONFIG_S390_PRNG=m
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_NLATTR=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
+# CONFIG_VHOST_NET is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_BALLOON=m
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
#include <linux/namei.h>
#include <linux/vfs.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
-#include <linux/gfp.h>
#include <linux/time.h>
#include <linux/parser.h>
#include <linux/sysfs.h>
#ifndef __ASSEMBLY__
/*
* The vmalloc area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc,
+ * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc,
* which should be enough for any sane case.
* By putting vmalloc at the top, we maximise the gap between physical
* memory and vmalloc to catch misplaced memory accesses. As a side
#define VMALLOC_END 0x7e000000UL
#define VMEM_MAP_END 0x80000000UL
#else /* __s390x__ */
-#define VMALLOC_SIZE (1UL << 30)
-#define VMALLOC_END 0x3e040000000UL
+#define VMALLOC_SIZE (128UL << 30)
+#define VMALLOC_END 0x3e000000000UL
#define VMEM_MAP_END 0x40000000000UL
#endif /* __s390x__ */
#endif /* CONFIG_PFAULT */
extern void cmma_init(void);
+extern int memcpy_real(void *, void *, size_t);
#define finish_arch_switch(prev) do { \
set_fs(current->thread.mm_segment); \
" l %0,%2\n"
"0: nr %0,%5\n"
" lr %1,%0\n"
- " or %0,%2\n"
- " or %1,%3\n"
+ " or %0,%3\n"
+ " or %1,%4\n"
" cs %0,%1,%2\n"
" jnl 1f\n"
" xr %1,%0\n"
" l %0,%2\n"
"0: nr %0,%5\n"
" lr %1,%0\n"
- " or %0,%2\n"
- " or %1,%3\n"
+ " or %0,%3\n"
+ " or %1,%4\n"
" cs %0,%1,%2\n"
" jnl 1f\n"
" xr %1,%0\n"
__u32 tz_minuteswest; /* Minutes west of Greenwich 0x30 */
__u32 tz_dsttime; /* Type of dst correction 0x34 */
__u32 ectg_available;
+ __u32 ntp_mult; /* NTP adjusted multiplier 0x3C */
};
struct vdso_per_cpu_data {
DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest));
DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available));
+ DEFINE(__VDSO_NTP_MULT, offsetof(struct vdso_data, ntp_mult));
DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base));
DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time));
/* constants used by the vdso */
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
-#include <linux/slab.h>
#include <linux/uio.h>
#include <linux/quota.h>
#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/fadvise.h>
#include <linux/ipc.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/uaccess.h>
" lm 6,15,24(15)\n"
#endif
" br 14\n"
- " .size savesys_ipl_nss, .-savesys_ipl_nss\n");
+ " .size savesys_ipl_nss, .-savesys_ipl_nss\n"
+ " .previous\n");
static __initdata char upper_command_line[COMMAND_LINE_SIZE];
clc 4(4,%r12),BASED(cleanup_table_io_work_loop)
bl BASED(0f)
clc 4(4,%r12),BASED(cleanup_table_io_work_loop+4)
- bl BASED(cleanup_io_return)
+ bl BASED(cleanup_io_work_loop)
0:
br %r14
.long sysc_done - 8 + 0x80000000
cleanup_io_return:
+ mvc __LC_RETURN_PSW(4),0(%r12)
+ mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_io_return)
+ la %r12,__LC_RETURN_PSW
+ br %r14
+
+cleanup_io_work_loop:
mvc __LC_RETURN_PSW(4),0(%r12)
mvc __LC_RETURN_PSW+4(4),BASED(cleanup_table_io_work_loop)
la %r12,__LC_RETURN_PSW
clc 8(8,%r12),BASED(cleanup_table_io_work_loop)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_io_work_loop+8)
- jl cleanup_io_return
+ jl cleanup_io_work_loop
0:
br %r14
.quad sysc_done - 16
cleanup_io_return:
+ mvc __LC_RETURN_PSW(8),0(%r12)
+ mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_io_return)
+ la %r12,__LC_RETURN_PSW
+ br %r14
+
+cleanup_io_work_loop:
mvc __LC_RETURN_PSW(8),0(%r12)
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_io_work_loop)
la %r12,__LC_RETURN_PSW
lhi %r1,2 # mode 2 = esame (dump)
sigp %r1,%r0,0x12 # switch to esame mode
sam64 # switch to 64 bit mode
+ larl %r13,4f
+ lmh %r0,%r15,0(%r13) # clear high-order half
jg startup_continue
+4: .fill 16,4,0x0
#else
mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0)
l %r13,4f-.LPG0(%r13)
larl %r1,sched_clock_base_cc
mvc 0(8,%r1),__LC_LAST_UPDATE_CLOCK
larl %r13,.LPG1 # get base
- lmh %r0,%r15,.Lzero64-.LPG1(%r13) # clear high-order half
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lnop: .long 0x07000700
-.Lzero64:.fill 16,4,0x0
.Lparmaddr:
.quad PARMAREA
.align 64
#include <linux/reboot.h>
#include <linux/ctype.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <asm/ipl.h>
#include <asm/smp.h>
#include <asm/setup.h>
#include <asm/cacheflush.h>
#include <asm/sections.h>
#include <linux/module.h>
+#include <linux/slab.h>
DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
#include <linux/fs.h>
#include <linux/smp.h>
#include <linux/stddef.h>
+#include <linux/slab.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/user.h>
#include <linux/interrupt.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/tty.h>
#include <linux/ioport.h>
* Setup lowcore for boot cpu
*/
BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096);
- lc = __alloc_bootmem(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
+ lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
lc->restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE) {
lc->extended_save_area_addr = (__u32)
- __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
+ __alloc_bootmem_low(PAGE_SIZE, PAGE_SIZE, 0);
/* enable extended save area */
__ctl_set_bit(14, 29);
}
#include <linux/cpu.h>
#include <linux/timex.h>
#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <asm/asm-offsets.h>
#include <asm/ipl.h>
#include <asm/setup.h>
zfcpdump_save_areas[cpu] = kmalloc(sizeof(struct save_area), GFP_KERNEL);
while (raw_sigp(phy_cpu, sigp_stop_and_store_status) == sigp_busy)
cpu_relax();
- memcpy(zfcpdump_save_areas[cpu],
- (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE,
- sizeof(struct save_area));
+ memcpy_real(zfcpdump_save_areas[cpu],
+ (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE,
+ sizeof(struct save_area));
}
struct save_area *zfcpdump_save_areas[NR_CPUS + 1];
lghi %r2,0
brasl %r14,arch_set_page_states
+ /* Reinitialize the channel subsystem */
+ brasl %r14,channel_subsystem_reinit
+
/* Return 0 */
lmg %r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
lghi %r2,0
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/ebcdic.h>
#include <asm/sysinfo.h>
#include <asm/cpcmd.h>
#include <linux/notifier.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <asm/delay.h>
#include <asm/s390_ext.h>
vdso_data->xtime_clock_nsec = wall_time->tv_nsec;
vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+ vdso_data->ntp_mult = mult;
smp_wmb();
++vdso_data->tb_update_count;
}
default:
clear_cores();
machine_has_topology = 0;
- return;
+ goto out;
}
tle = next_tle(tle);
}
+out:
spin_unlock_irq(&topology_lock);
}
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
ahi %r0,-1
-2: mhi %r0,1000 /* cyc2ns(clock,cycle_delta) */
+2: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
lr %r2,%r0
- lhi %r0,1000
+ l %r0,__VDSO_NTP_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 3f
- ahi %r0,1000
+ a %r0,__VDSO_NTP_MULT(%r5)
3: alr %r0,%r2
srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
ahi %r0,-1
-12: mhi %r0,1000 /* cyc2ns(clock,cycle_delta) */
+12: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
lr %r2,%r0
- lhi %r0,1000
+ l %r0,__VDSO_NTP_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 13f
- ahi %r0,1000
+ a %r0,__VDSO_NTP_MULT(%r5)
13: alr %r0,%r2
srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
-3: mhi %r0,1000 /* cyc2ns(clock,cycle_delta) */
+3: ms %r0,__VDSO_NTP_MULT(%r5) /* cyc2ns(clock,cycle_delta) */
st %r0,24(%r15)
- lhi %r0,1000
+ l %r0,__VDSO_NTP_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
- ahi %r0,1000
+ a %r0,__VDSO_NTP_MULT(%r5)
4: al %r0,24(%r15)
srdl %r0,12
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- mghi %r1,1000
+ msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
lg %r0,__VDSO_XTIME_SEC(%r5)
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- mghi %r1,1000
+ msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime */
lg %r0,__VDSO_XTIME_SEC(%r5)
stck 48(%r15) /* Store TOD clock */
lg %r1,48(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
- mghi %r1,1000
+ msgf %r1,__VDSO_NTP_MULT(%r5) /* * NTP adjustment */
srlg %r1,%r1,12 /* cyc2ns(clock,cycle_delta) */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + xtime.tv_nsec */
lg %r0,__VDSO_XTIME_SEC(%r5) /* xtime.tv_sec */
#include <linux/kvm_host.h>
#include <linux/hrtimer.h>
#include <linux/signal.h>
+#include <linux/slab.h>
#include <asm/asm-offsets.h>
#include <asm/uaccess.h>
#include "kvm-s390.h"
*/
#include <linux/kvm.h>
+#include <linux/gfp.h>
#include <linux/errno.h>
#include <asm/current.h>
#include <asm/debug.h>
#include <linux/kvm.h>
#include <linux/kvm_host.h>
+#include <linux/slab.h>
#include "gaccess.h"
#include "kvm-s390.h"
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/sysctl.h>
#include <linux/ctype.h>
#include <linux/pfn.h>
#include <linux/poison.h>
#include <linux/initrd.h>
+#include <linux/gfp.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
}
return copied < 0 ? -EFAULT : 0;
}
+
+int memcpy_real(void *dest, void *src, size_t count)
+{
+ register unsigned long _dest asm("2") = (unsigned long) dest;
+ register unsigned long _len1 asm("3") = (unsigned long) count;
+ register unsigned long _src asm("4") = (unsigned long) src;
+ register unsigned long _len2 asm("5") = (unsigned long) count;
+ unsigned long flags;
+ int rc = -EFAULT;
+
+ if (!count)
+ return 0;
+ flags = __raw_local_irq_stnsm(0xf8UL);
+ asm volatile (
+ "0: mvcle %1,%2,0x0\n"
+ "1: jo 0b\n"
+ " lhi %0,0x0\n"
+ "2:\n"
+ EX_TABLE(1b,2b)
+ : "+d" (rc), "+d" (_dest), "+d" (_src), "+d" (_len1),
+ "+d" (_len2), "=m" (*((long *) dest))
+ : "m" (*((long *) src))
+ : "cc", "memory");
+ __raw_local_irq_ssm(flags);
+ return rc;
+}
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#define ESSA_SET_STABLE 1
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/highmem.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/module.h>
#include <linux/list.h>
#include <linux/hugetlb.h>
+#include <linux/slab.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t));
if (!pte)
return NULL;
- if (MACHINE_HAS_HPAGE)
- clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY | _PAGE_CO,
- PTRS_PER_PTE * sizeof(pte_t));
- else
- clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
- PTRS_PER_PTE * sizeof(pte_t));
+ clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
+ PTRS_PER_PTE * sizeof(pte_t));
return pte;
}
if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) &&
(address + HPAGE_SIZE <= start + size) &&
(address >= HPAGE_SIZE)) {
- pte_val(pte) |= _SEGMENT_ENTRY_LARGE |
- _SEGMENT_ENTRY_CO;
+ pte_val(pte) |= _SEGMENT_ENTRY_LARGE;
pmd_val(*pm_dir) = pte_val(pte);
address += HPAGE_SIZE - PAGE_SIZE;
continue;
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/unistd.h>
#include <linux/syscalls.h>
#include <asm/syscalls.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/mman.h>
pd->mac_addr[i] = mac_read(a, 0x10 + i);
msleep(10);
}
+
+ i2c_put_adapter(a);
}
#else
static void __init sh_eth_init(struct sh_eth_plat_data *pd)
* and change SW41 to use 720p
*/
+/*
+ * about sound
+ *
+ * This setup.c supports FSI slave mode.
+ * Please change J20, J21, J22 pin to 1-2 connection.
+ */
+
/* Heartbeat */
static struct resource heartbeat_resource = {
.start = PA_LED,
.rate = 0, /* unknown */
};
+/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc2
-# Mon Jan 4 11:20:36 2010
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 02:21:58 2010
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DMA_NONCOHERENT=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# Kernel Performance Events And Counters
#
-# CONFIG_PERF_EVENTS is not set
+CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_HW_BREAKPOINT=y
#
# GCOV-based kernel profiling
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_29BIT=y
-# CONFIG_PMB_ENABLE is not set
-# CONFIG_X2TLB is not set
+# CONFIG_PMB is not set
+CONFIG_X2TLB=y
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_IOREMAP_FIXED=y
+CONFIG_UNCACHED_MAPPING=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=2
+CONFIG_NR_QUICK=1
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
#
# Boot options
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_CMDLINE_OVERWRITE=y
# CONFIG_CMDLINE_EXTEND is not set
-CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=248M memchunk.vpu=8m memchunk.veu0=4m"
#
# Bus options
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+CONFIG_SH_SIR=y
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
# CONFIG_MTD_ONENAND is not set
#
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+CONFIG_TOUCHSCREEN_TSC2007=y
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# Memory mapped GPIO expanders:
#
+# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SH_MOBILE_SDHI is not set
+CONFIG_MFD_SH_MOBILE_SDHI=y
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
-# CONFIG_SOC_CAMERA_MT9T112 is not set
+CONFIG_SOC_CAMERA_MT9T112=y
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_RJ54N1 is not set
-# CONFIG_SOC_CAMERA_TW9910 is not set
+CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
# CONFIG_SOC_CAMERA_OV9640 is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
+# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set
#
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_SH_MOBILE_LCDC=y
+# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_SEQ_DUMMY=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_SND_FSI_AK4642 is not set
+CONFIG_SND_FSI_DA7210=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_DA7210=y
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
#
# OTG and related infrastructure
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
-# CONFIG_MMC_TMIO is not set
+CONFIG_MMC_TMIO=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_SMX is not set
-# CONFIG_UIO_SERCOS3 is not set
#
# TI VLYNQ
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=1
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
CONFIG_SERIAL_SH_SCI_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#include <linux/platform_device.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/dma.h>
DEFINE_SPINLOCK(dma_spin_lock);
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <asm/dma.h>
#include <asm/dmabrg.h>
#include <asm/io.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/heartbeat.h>
#define DRV_NAME "heartbeat"
#include <linux/io.h>
#include "pci-sh4.h"
#include <asm/addrspace.h>
+#include <asm/sizes.h>
static int __init __area_sdram_check(struct pci_channel *chan,
unsigned int area)
static struct resource sh7751_pci_resources[] = {
{
.name = "SH7751_IO",
- .start = SH7751_PCI_IO_BASE,
- .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1,
+ .start = 0x1000,
+ .end = SZ_4M - 1,
.flags = IORESOURCE_IO
}, {
.name = "SH7751_mem",
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "pcie-sh7786.h"
#include <asm/sizes.h>
* for more details.
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#define VSYSCALL_AUX_ENT \
if (vdso_enabled) \
- NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); \
+ else \
+ NEW_AUX_ENT(AT_IGNORE, 0);
#else
#define VSYSCALL_AUX_ENT
#endif /* CONFIG_VSYSCALL */
#ifdef CONFIG_SH_FPU
#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
#else
-#define FPU_AUX_ENT
+#define FPU_AUX_ENT NEW_AUX_ENT(AT_IGNORE, 0)
#endif
extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
}
#define TS_INDEX2VAL(i) ((((i) & 3) << CHCR_TS_LOW_SHIFT) | \
- ((((i) >> 2) & 3) << CHCR_TS_HIGH_SHIFT))
+ (((i) & 0xc) << CHCR_TS_HIGH_SHIFT))
#else /* CONFIG_CPU_SH4A */
#define MMUCR 0xFF000010 /* MMU Control Register */
+#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000
+#define MMU_ITLB_ADDRESS_ARRAY2 0xF2800000
#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000
#define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000
#define MMU_PAGE_ASSOC_BIT 0x80
#define MMUCR_URB 0x00FC0000
#define MMUCR_URB_SHIFT 18
#define MMUCR_URB_NENTRIES 64
+#define MMUCR_URC 0x0000FC00
+#define MMUCR_URC_SHIFT 10
#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
#define MMUCR_SE (1 << 4)
#define WTCNT 0xffcc0000 /*WDTST*/
#define WTST WTCNT
#define WTBST 0xffcc0008 /*WDTBST*/
+/* Register definitions */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define WTCNT 0xa4520000
+#define WTCSR 0xa4520004
#else
/* Register definitions */
#define WTCNT 0xffc00008
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/fpu.h>
#include <linux/clk.h>
#include <linux/compiler.h>
-#include <linux/slab.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <asm/suspend.h>
return -ENODEV;
cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
BUG_ON(smp_processor_id() != cpu);
freqs.flags = 0;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
- set_cpus_allowed(current, cpus_allowed);
+ set_cpus_allowed_ptr(current, &cpus_allowed);
clk_set_rate(cpuclk, freq);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
#include <linux/mm.h>
#include <linux/elf.h>
#include <linux/ftrace.h>
+#include <linux/slab.h>
#include <asm/dwarf.h>
#include <asm/unwinder.h>
#include <asm/sections.h>
unsigned char *end, struct module *mod)
{
struct rb_node **rb_node = &cie_root.rb_node;
- struct rb_node *parent;
+ struct rb_node *parent = *rb_node;
struct dwarf_cie *cie;
unsigned long flags;
int count;
unsigned char *end, struct module *mod)
{
struct rb_node **rb_node = &fde_root.rb_node;
- struct rb_node *parent;
+ struct rb_node *parent = *rb_node;
struct dwarf_fde *fde;
struct dwarf_cie *cie;
unsigned long flags;
}
}
-void __cpuinit select_idle_routine(void)
+void __init select_idle_routine(void)
{
/*
* If a platform has set its own idle routine, leave it alone.
#include <linux/ptrace.h>
#include <linux/preempt.h>
#include <linux/kdebug.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/uaccess.h>
sh_pmu->disable_all();
}
-int register_sh_pmu(struct sh_pmu *pmu)
+int __cpuinit register_sh_pmu(struct sh_pmu *pmu)
{
if (sh_pmu)
return -EBUSY;
#include <linux/mm.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/sched.h>
struct kmem_cache *task_xstate_cachep = NULL;
*/
#include <linux/module.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/elfcore.h>
#include <linux/kallsyms.h>
#include <linux/fs.h>
#include <linux/fs.h>
#include <linux/ptrace.h>
#include <linux/reboot.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/io.h>
return error;
}
-/*
- * These bracket the sleeping functions..
- */
-extern void interruptible_sleep_on(wait_queue_head_t *q);
-
-#define mid_sched ((unsigned long) interruptible_sleep_on)
-
#ifdef CONFIG_FRAME_POINTER
static int in_sh64_switch_to(unsigned long pc)
{
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/user.h>
-#include <linux/slab.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <linux/io.h>
* for more details.
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <asm/dwarf.h>
#ifdef CONFIG_DWARF_UNWINDER
}
#endif
+
+EXPORT_SYMBOL_GPL(return_address);
unsigned int cpu;
struct mm_struct *mm = &init_mm;
+ enable_mmu();
atomic_inc(&mm->mm_count);
atomic_inc(&mm->mm_users);
current->active_mm = mm;
* for more details.
*/
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/dma-debug.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <asm/cacheflush.h>
#include <asm/addrspace.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/slab.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
#include <linux/pagemap.h>
*/
#include <linux/vmalloc.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/io.h>
#include <linux/bootmem.h>
#include <linux/proc_fs.h>
-#include <linux/slab.h>
#include <asm/fixmap.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#define PGALLOC_GFP GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/fs.h>
writel_uncached(data_val & ~PMB_V, data);
}
+#ifdef CONFIG_PM
static void set_pmb_entry(struct pmb_entry *pmbe)
{
unsigned long flags;
__set_pmb_entry(pmbe);
spin_unlock_irqrestore(&pmbe->lock, flags);
}
+#endif /* CONFIG_PM */
int pmb_bolt_mapping(unsigned long vaddr, phys_addr_t phys,
unsigned long size, pgprot_t prot)
writel_uncached(0, PMB_IRMCR);
/* Flush out the TLB */
- __raw_writel(__raw_readl(MMUCR) | MMUCR_TI, MMUCR);
+ local_flush_tlb_all();
ctrl_barrier();
}
jump_to_uncached();
__raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
__raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
+ __raw_writel(page, MMU_ITLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
+ __raw_writel(asid, MMU_ITLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
back_to_cached();
}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags, status;
+ int i;
+
+ /*
+ * Flush all the TLB.
+ */
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ status = __raw_readl(MMUCR);
+ status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+ if (status == 0)
+ status = MMUCR_URB_NENTRIES;
+
+ for (i = 0; i < status; i++)
+ __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+ back_to_cached();
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
for (i = 0; i < ways; i++)
__raw_writel(data, addr + (i << 8));
}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags, status;
+
+ /*
+ * Flush all the TLB.
+ *
+ * Write to the MMU control register's bit:
+ * TF-bit for SH-3, TI-bit for SH-4.
+ * It's same position, bit #2.
+ */
+ local_irq_save(flags);
+ status = __raw_readl(MMUCR);
+ status |= 0x04;
+ __raw_writel(status, MMUCR);
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
__raw_writel(data, addr);
back_to_cached();
}
+
+void local_flush_tlb_all(void)
+{
+ unsigned long flags, status;
+ int i;
+
+ /*
+ * Flush all the TLB.
+ */
+ local_irq_save(flags);
+ jump_to_uncached();
+
+ status = __raw_readl(MMUCR);
+ status = ((status & MMUCR_URB) >> MMUCR_URB_SHIFT);
+
+ if (status == 0)
+ status = MMUCR_URB_NENTRIES;
+
+ for (i = 0; i < status; i++)
+ __raw_writel(0x0, MMU_UTLB_ADDRESS_ARRAY | (i << 8));
+
+ for (i = 0; i < 4; i++)
+ __raw_writel(0x0, MMU_ITLB_ADDRESS_ARRAY | (i << 8));
+
+ back_to_cached();
+ ctrl_barrier();
+ local_irq_restore(flags);
+}
local_irq_save(flags);
- /* Load the entry into the TLB */
- __update_tlb(vma, addr, pte);
-
- /* ... and wire it up. */
status = __raw_readl(MMUCR);
urb = (status & MMUCR_URB) >> MMUCR_URB_SHIFT;
- status &= ~MMUCR_URB;
+ status &= ~MMUCR_URC;
/*
* Make sure we're not trying to wire the last TLB entry slot.
urb = urb % MMUCR_URB_NENTRIES;
+ /*
+ * Insert this entry into the highest non-wired TLB slot (via
+ * the URC field).
+ */
+ status |= (urb << MMUCR_URC_SHIFT);
+ __raw_writel(status, MMUCR);
+ ctrl_barrier();
+
+ /* Load the entry into the TLB */
+ __update_tlb(vma, addr, pte);
+
+ /* ... and wire it up. */
+ status = __raw_readl(MMUCR);
+
+ status &= ~MMUCR_URB;
status |= (urb << MMUCR_URB_SHIFT);
+
__raw_writel(status, MMUCR);
ctrl_barrier();
local_irq_restore(flags);
}
}
-
-void local_flush_tlb_all(void)
-{
- unsigned long flags, status;
-
- /*
- * Flush all the TLB.
- *
- * Write to the MMU control register's bit:
- * TF-bit for SH-3, TI-bit for SH-4.
- * It's same position, bit #2.
- */
- local_irq_save(flags);
- status = __raw_readl(MMUCR);
- status |= 0x04;
- __raw_writel(status, MMUCR);
- ctrl_barrier();
- local_irq_restore(flags);
-}
def_bool 64BIT
select ARCH_SUPPORTS_MSI
select HAVE_FUNCTION_TRACER
+ select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_FUNCTION_GRAPH_FP_TEST
+ select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_KRETPROBES
select HAVE_KPROBES
select HAVE_LMB
bool "D-cache flush debugging"
depends on SPARC64 && DEBUG_KERNEL
-config STACK_DEBUG
- bool "Stack Overflow Detection Support"
-
config MCOUNT
bool
depends on SPARC64
- depends on STACK_DEBUG || FUNCTION_TRACER
+ depends on FUNCTION_TRACER
default y
config FRAME_POINTER
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33
-# Wed Mar 3 02:54:29 2010
+# Linux kernel version: 2.6.34-rc3
+# Sat Apr 3 15:49:56 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_MMU=y
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
-# CONFIG_MFD_88PM8607 is not set
+# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_FB_LEO is not set
CONFIG_FB_XVR500=y
CONFIG_FB_XVR2500=y
+CONFIG_FB_XVR1000=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
unsigned int __nmi_count;
unsigned long clock_tick; /* %tick's per second */
unsigned long __pad;
- unsigned int __pad1;
+ unsigned int irq0_irqs;
unsigned int __pad2;
/* Dcache line 2, rarely used */
*/
static inline unsigned long __raw_local_irq_save(void)
{
- unsigned long flags = __raw_local_save_flags();
-
- raw_local_irq_disable();
+ unsigned long flags, tmp;
+
+ /* Disable interrupts to PIL_NORMAL_MAX unless we already
+ * are using PIL_NMI, in which case PIL_NMI is retained.
+ *
+ * The only values we ever program into the %pil are 0,
+ * PIL_NORMAL_MAX and PIL_NMI.
+ *
+ * Since PIL_NMI is the largest %pil value and all bits are
+ * set in it (0xf), it doesn't matter what PIL_NORMAL_MAX
+ * actually is.
+ */
+ __asm__ __volatile__(
+ "rdpr %%pil, %0\n\t"
+ "or %0, %2, %1\n\t"
+ "wrpr %1, 0x0, %%pil"
+ : "=r" (flags), "=r" (tmp)
+ : "i" (PIL_NORMAL_MAX)
+ : "memory"
+ );
return flags;
}
ino_t st_ino;
mode_t st_mode;
short st_nlink;
- uid16_t st_uid;
- gid16_t st_gid;
+ unsigned short st_uid;
+ unsigned short st_gid;
unsigned short st_rdev;
off_t st_size;
time_t st_atime;
#define THREAD_SHIFT PAGE_SHIFT
#endif /* PAGE_SHIFT == 13 */
-#define PREEMPT_ACTIVE 0x4000000
+#define PREEMPT_ACTIVE 0x10000000
/*
* macros/functions for gaining access to the thread information structure
CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS)
extra-y += vmlinux.lds
+ifdef CONFIG_FUNCTION_TRACER
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_ftrace.o := -pg
+CFLAGS_REMOVE_time_$(BITS).o := -pg
+CFLAGS_REMOVE_perf_event.o := -pg
+CFLAGS_REMOVE_pcr.o := -pg
+endif
+
obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o
obj-$(CONFIG_SPARC32) += etrap_32.o
obj-$(CONFIG_SPARC32) += rtrap_32.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
-CFLAGS_REMOVE_ftrace.o := -pg
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_EARLYFB) += btext.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/of_device.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cpumask.h>
static u32 ftrace_call_replace(unsigned long ip, unsigned long addr)
{
- static u32 call;
+ u32 call;
s32 off;
off = ((s32)addr - (s32)ip);
return 0;
}
#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern void ftrace_graph_call(void);
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+ unsigned long ip = (unsigned long)(&ftrace_graph_call);
+ u32 old, new;
+
+ old = *(u32 *) &ftrace_graph_call;
+ new = ftrace_call_replace(ip, (unsigned long) &ftrace_graph_caller);
+ return ftrace_modify_code(ip, old, new);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+ unsigned long ip = (unsigned long)(&ftrace_graph_call);
+ u32 old, new;
+
+ old = *(u32 *) &ftrace_graph_call;
+ new = ftrace_call_replace(ip, (unsigned long) &ftrace_stub);
+
+ return ftrace_modify_code(ip, old, new);
+}
+
+#endif /* !CONFIG_DYNAMIC_FTRACE */
+
+/*
+ * Hook the return address and push it in the stack of return addrs
+ * in current thread info.
+ */
+unsigned long prepare_ftrace_return(unsigned long parent,
+ unsigned long self_addr,
+ unsigned long frame_pointer)
+{
+ unsigned long return_hooker = (unsigned long) &return_to_handler;
+ struct ftrace_graph_ent trace;
+
+ if (unlikely(atomic_read(¤t->tracing_graph_pause)))
+ return parent + 8UL;
+
+ if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
+ frame_pointer) == -EBUSY)
+ return parent + 8UL;
+
+ trace.func = self_addr;
+
+ /* Only trace if the calling function expects to */
+ if (!ftrace_graph_entry(&trace)) {
+ current->curr_ret_stack--;
+ return parent + 8UL;
+ }
+
+ return return_hooker;
+}
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
nop
.size stack_trace_flush,.-stack_trace_flush
+#ifdef CONFIG_PERF_EVENTS
+ .globl perf_arch_fetch_caller_regs
+ .type perf_arch_fetch_caller_regs,#function
+perf_arch_fetch_caller_regs:
+ /* We always read the %pstate into %o5 since we will use
+ * that to construct a fake %tstate to store into the regs.
+ */
+ rdpr %pstate, %o5
+ brz,pn %o2, 50f
+ mov %o2, %g7
+
+ /* Turn off interrupts while we walk around the register
+ * window by hand.
+ */
+ wrpr %o5, PSTATE_IE, %pstate
+
+ /* The %canrestore tells us how many register windows are
+ * still live in the chip above us, past that we have to
+ * walk the frame as saved on the stack. We stash away
+ * the %cwp in %g1 so we can return back to the original
+ * register window.
+ */
+ rdpr %cwp, %g1
+ rdpr %canrestore, %g2
+ sub %g1, 1, %g3
+
+ /* We have the skip count in %g7, if it hits zero then
+ * %fp/%i7 are the registers we need. Otherwise if our
+ * %canrestore count maintained in %g2 hits zero we have
+ * to start traversing the stack.
+ */
+10: brz,pn %g2, 4f
+ sub %g2, 1, %g2
+ wrpr %g3, %cwp
+ subcc %g7, 1, %g7
+ bne,pt %xcc, 10b
+ sub %g3, 1, %g3
+
+ /* We found the values we need in the cpu's register
+ * windows.
+ */
+ mov %fp, %g3
+ ba,pt %xcc, 3f
+ mov %i7, %g2
+
+50: mov %fp, %g3
+ ba,pt %xcc, 2f
+ mov %i7, %g2
+
+ /* We hit the end of the valid register windows in the
+ * cpu, start traversing the stack frame.
+ */
+4: mov %fp, %g3
+
+20: ldx [%g3 + STACK_BIAS + RW_V9_I7], %g2
+ subcc %g7, 1, %g7
+ bne,pn %xcc, 20b
+ ldx [%g3 + STACK_BIAS + RW_V9_I6], %g3
+
+ /* Restore the current register window position and
+ * re-enable interrupts.
+ */
+3: wrpr %g1, %cwp
+ wrpr %o5, %pstate
+
+2: stx %g3, [%o0 + PT_V9_FP]
+ sllx %o5, 8, %o5
+ stx %o5, [%o0 + PT_V9_TSTATE]
+ stx %g2, [%o0 + PT_V9_TPC]
+ add %g2, 4, %g2
+ retl
+ stx %g2, [%o0 + PT_V9_TNPC]
+ .size perf_arch_fetch_caller_regs,.-perf_arch_fetch_caller_regs
+#endif /* CONFIG_PERF_EVENTS */
+
#ifdef CONFIG_SMP
.globl hard_smp_processor_id
.type hard_smp_processor_id,#function
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <asm/hypervisor.h>
#include <asm/oplib.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/ftrace.h>
#include <linux/irq.h>
+#include <linux/kmemleak.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include "entry.h"
#include "cpumap.h"
+#include "kstack.h"
#define NUM_IVECS (IMAP_INR + 1)
bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
if (unlikely(!bucket))
return 0;
+
+ /* The only reference we store to the IRQ bucket is
+ * by physical address which kmemleak can't see, tell
+ * it that this object explicitly is not a leak and
+ * should be scanned.
+ */
+ kmemleak_not_leak(bucket);
+
__flush_dcache_range((unsigned long) bucket,
((unsigned long) bucket +
sizeof(struct ino_bucket)));
void *hardirq_stack[NR_CPUS];
void *softirq_stack[NR_CPUS];
-static __attribute__((always_inline)) void *set_hardirq_stack(void)
-{
- void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
-
- __asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
- if (orig_sp < sp ||
- orig_sp > (sp + THREAD_SIZE)) {
- sp += THREAD_SIZE - 192 - STACK_BIAS;
- __asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
- }
-
- return orig_sp;
-}
-static __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
-{
- __asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
-}
-
-void handler_irq(int irq, struct pt_regs *regs)
+void __irq_entry handler_irq(int irq, struct pt_regs *regs)
{
unsigned long pstate, bucket_pa;
struct pt_regs *old_regs;
#include <linux/kgdb.h>
#include <linux/kdebug.h>
+#include <linux/ftrace.h>
#include <asm/kdebug.h>
#include <asm/ptrace.h>
}
#ifdef CONFIG_SMP
-void smp_kgdb_capture_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_kgdb_capture_client(int irq, struct pt_regs *regs)
{
unsigned long flags;
#include <linux/kprobes.h>
#include <linux/module.h>
#include <linux/kdebug.h>
+#include <linux/slab.h>
#include <asm/signal.h>
#include <asm/cacheflush.h>
#include <asm/uaccess.h>
}
+static inline __attribute__((always_inline)) void *set_hardirq_stack(void)
+{
+ void *orig_sp, *sp = hardirq_stack[smp_processor_id()];
+
+ __asm__ __volatile__("mov %%sp, %0" : "=r" (orig_sp));
+ if (orig_sp < sp ||
+ orig_sp > (sp + THREAD_SIZE)) {
+ sp += THREAD_SIZE - 192 - STACK_BIAS;
+ __asm__ __volatile__("mov %0, %%sp" : : "r" (sp));
+ }
+
+ return orig_sp;
+}
+
+static inline __attribute__((always_inline)) void restore_hardirq_stack(void *orig_sp)
+{
+ __asm__ __volatile__("mov %0, %%sp" : : "r" (orig_sp));
+}
+
#endif /* _KSTACK_H */
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/mutex.h>
-#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/interrupt.h>
#include <linux/profile.h>
#include <linux/pm.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <linux/elf.h>
#include <linux/vmalloc.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/string.h>
#include <linux/ctype.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/pcr.h>
+#include "kstack.h"
+
/* We don't have a real NMI on sparc64, but we can fake one
* up using profiling counter overflow interrupts and interrupt
* levels.
notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
{
unsigned int sum, touched = 0;
- int cpu = smp_processor_id();
+ void *orig_sp;
clear_softint(1 << irq);
nmi_enter();
+ orig_sp = set_hardirq_stack();
+
if (notify_die(DIE_NMI, "nmi", regs, 0,
pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
touched = 1;
else
pcr_ops->write(PCR_PIC_PRIV);
- sum = kstat_irqs_cpu(0, cpu);
+ sum = local_cpu_data().irq0_irqs;
if (__get_cpu_var(nmi_touch)) {
__get_cpu_var(nmi_touch) = 0;
touched = 1;
pcr_ops->write(pcr_enable);
}
+ restore_hardirq_stack(orig_sp);
+
nmi_exit();
}
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/of_device.h>
struct resource *rp = kzalloc(sizeof(*rp), GFP_KERNEL);
if (!rp) {
- prom_printf("Cannot allocate IOMMU resource.\n");
- prom_halt();
+ pr_info("%s: Cannot allocate IOMMU resource.\n",
+ pbm->name);
+ return;
}
rp->name = "IOMMU";
rp->start = pbm->mem_space.start + (unsigned long) vdma[0];
rp->end = rp->start + (unsigned long) vdma[1] - 1UL;
rp->flags = IORESOURCE_BUSY;
- request_resource(&pbm->mem_space, rp);
+ if (request_resource(&pbm->mem_space, rp)) {
+ pr_info("%s: Unable to request IOMMU resource.\n",
+ pbm->name);
+ kfree(rp);
+ }
}
}
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/irq.h>
#include "pci_impl.h"
#include <linux/irq.h>
#include <linux/perf_event.h>
+#include <linux/ftrace.h>
#include <asm/pil.h>
#include <asm/pcr.h>
* Therefore in such situations we defer the work by signalling
* a lower level cpu IRQ.
*/
-void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
+void __irq_entry deferred_pcr_work_irq(int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs;
callchain_store(entry, PERF_CONTEXT_USER);
callchain_store(entry, regs->tpc);
- ufp = regs->u_regs[UREG_I6];
+ ufp = regs->u_regs[UREG_I6] & 0xffffffffUL;
do {
struct sparc_stackf32 *usf, sf;
unsigned long pc;
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/smp.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/auxio.h>
#include <asm/oplib.h>
*k++ = regs->u_regs[pos++];
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (get_user(*k++, ®_window[pos++]))
return -EFAULT;
}
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, ®_window[pos++]) ||
put_user(reg, u++))
regs->u_regs[pos++] = *k++;
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (put_user(*k++, ®_window[pos++]))
return -EFAULT;
}
reg_window = (unsigned long __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, u++) ||
put_user(reg, ®_window[pos++]))
*k++ = regs->u_regs[pos++];
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (get_user(*k++, ®_window[pos++]))
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, ®_window[pos++]) ||
regs->u_regs[pos++] = *k++;
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (put_user(*k++, ®_window[pos++]))
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
+ reg_window -= 16;
if (target == current) {
for (; count > 0 && pos < 32; count--) {
if (get_user(reg, u++) ||
nop
call trace_hardirqs_on
nop
- wrpr %l4, %pil
+ /* Do not actually set the %pil here. We will do that
+ * below after we clear PSTATE_IE in the %pstate register.
+ * If we re-enable interrupts here, we can recurse down
+ * the hardirq stack potentially endlessly, causing a
+ * stack overflow.
+ *
+ * It is tempting to put this test and trace_hardirqs_on
+ * call at the 'rt_continue' label, but that will not work
+ * as that path hits unconditionally and we do not want to
+ * execute this in NMI return paths, for example.
+ */
#endif
rtrap_no_irq_enable:
andcc %l1, TSTATE_PRIV, %l3
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <asm/smp.h>
#include <linux/user.h>
#include <linux/screen_info.h>
#include <linux/profile.h>
#include <linux/bootmem.h>
#include <linux/vmalloc.h>
+#include <linux/ftrace.h>
#include <linux/cpu.h>
+#include <linux/slab.h>
#include <asm/head.h>
#include <asm/ptrace.h>
&cpumask_of_cpu(cpu));
}
-void smp_call_function_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
generic_smp_call_function_interrupt();
}
-void smp_call_function_single_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
generic_smp_call_function_single_interrupt();
put_cpu();
}
-void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
{
struct mm_struct *mm;
unsigned long flags;
*/
extern void prom_world(int);
-void smp_penguin_jailcell(int irq, struct pt_regs *regs)
+void __irq_entry smp_penguin_jailcell(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
&cpumask_of_cpu(cpu));
}
-void smp_receive_signal_client(int irq, struct pt_regs *regs)
+void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
}
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/of.h>
#include <linux/sem.h>
#include <linux/msg.h>
#include <linux/shm.h>
-#include <linux/slab.h>
#include <linux/uio.h>
#include <linux/nfs_fs.h>
#include <linux/quota.h>
#include <linux/compat.h>
#include <linux/vfs.h>
#include <linux/ptrace.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <asm/uaccess.h>
unsigned long ret;
/* should return -EINVAL to userspace */
- if (set_cpus_allowed(current, cpumask_of_cpu(cpu)))
+ if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
return 0;
ret = func(arg);
- set_cpus_allowed(current, old_affinity);
+ set_cpus_allowed_ptr(current, &old_affinity);
return ret;
}
#include <linux/clocksource.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/ftrace.h>
#include <asm/oplib.h>
#include <asm/timer.h>
};
static DEFINE_PER_CPU(struct clock_event_device, sparc64_events);
-void timer_interrupt(int irq, struct pt_regs *regs)
+void __irq_entry timer_interrupt(int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
unsigned long tick_mask = tick_ops->softint_mask;
irq_enter();
+ local_cpu_data().irq0_irqs++;
kstat_incr_irqs_this_cpu(0, irq_to_desc(0));
if (unlikely(!evt->event_handler)) {
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/kdebug.h>
+#include <linux/gfp.h>
#include <asm/smp.h>
#include <asm/delay.h>
EXPORT_SYMBOL(dump_stack);
-static inline int is_kernel_stack(struct task_struct *task,
- struct reg_window *rw)
-{
- unsigned long rw_addr = (unsigned long) rw;
- unsigned long thread_base, thread_end;
-
- if (rw_addr < PAGE_OFFSET) {
- if (task != &init_task)
- return 0;
- }
-
- thread_base = (unsigned long) task_stack_page(task);
- thread_end = thread_base + sizeof(union thread_union);
- if (rw_addr >= thread_base &&
- rw_addr < thread_end &&
- !(rw_addr & 0x7UL))
- return 1;
-
- return 0;
-}
-
static inline struct reg_window *kernel_stack_up(struct reg_window *rw)
{
unsigned long fp = rw->ins[6];
show_regs(regs);
add_taint(TAINT_DIE);
if (regs->tstate & TSTATE_PRIV) {
+ struct thread_info *tp = current_thread_info();
struct reg_window *rw = (struct reg_window *)
(regs->u_regs[UREG_FP] + STACK_BIAS);
* find some badly aligned kernel stack.
*/
while (rw &&
- count++ < 30&&
- is_kernel_stack(current, rw)) {
+ count++ < 30 &&
+ kstack_valid(tp, (unsigned long) rw)) {
printk("Caller[%016lx]: %pS\n", rw->ins[7],
(void *) rw->ins[7]);
}
/* 16 = double-word, 8 = extra-word, 4 = word, 2 = half-word */
-static inline int decode_access_size(unsigned int insn)
+static inline int decode_access_size(struct pt_regs *regs, unsigned int insn)
{
unsigned int tmp;
return 2;
else {
printk("Impossible unaligned trap. insn=%08x\n", insn);
- die_if_kernel("Byte sized unaligned access?!?!", current_thread_info()->kregs);
+ die_if_kernel("Byte sized unaligned access?!?!", regs);
/* GCC should never warn that control reaches the end
* of this function without returning a value because
asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn)
{
enum direction dir = decode_direction(insn);
- int size = decode_access_size(insn);
+ int size = decode_access_size(regs, insn);
int orig_asi, asi;
current_thread_info()->kern_una_regs = regs;
return 0;
cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
clock_tick = sparc64_get_clock_tick(cpu) / 1000;
estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
- set_cpus_allowed(current, cpus_allowed);
+ set_cpus_allowed_ptr(current, &cpus_allowed);
return clock_tick / estar_to_divisor(estar);
}
return;
cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
new_bits = index_to_estar_mode(index);
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- set_cpus_allowed(current, cpus_allowed);
+ set_cpus_allowed_ptr(current, &cpus_allowed);
}
static int us2e_freq_target(struct cpufreq_policy *policy,
return 0;
cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
reg = read_safari_cfg();
ret = get_current_freq(cpu, reg);
- set_cpus_allowed(current, cpus_allowed);
+ set_cpus_allowed_ptr(current, &cpus_allowed);
return ret;
}
return;
cpus_allowed = current->cpus_allowed;
- set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ set_cpus_allowed_ptr(current, cpumask_of(cpu));
new_freq = sparc64_get_clock_tick(cpu) / 1000;
switch (index) {
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
- set_cpus_allowed(current, cpus_allowed);
+ set_cpus_allowed_ptr(current, &cpus_allowed);
}
static int us3_freq_target(struct cpufreq_policy *policy,
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/init.h>
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
+ IRQENTRY_TEXT
*(.gnu.warning)
} = 0
_etext = .;
RO_DATA(PAGE_SIZE)
+
+ /* Start of data section */
+ _sdata = .;
+
.data1 : {
*(.data1)
}
#include <linux/linkage.h>
-#include <asm/ptrace.h>
-#include <asm/thread_info.h>
-
/*
* This is the main variant and is called by C code. GCC's -pg option
* automatically instruments every C function with a call to this.
*/
-#ifdef CONFIG_STACK_DEBUG
-
-#define OVSTACKSIZE 4096 /* lets hope this is enough */
-
- .data
- .align 8
-panicstring:
- .asciz "Stack overflow\n"
- .align 8
-ovstack:
- .skip OVSTACKSIZE
-#endif
.text
.align 32
.globl _mcount
.type mcount,#function
_mcount:
mcount:
-#ifdef CONFIG_STACK_DEBUG
- /*
- * Check whether %sp is dangerously low.
- */
- ldub [%g6 + TI_FPDEPTH], %g1
- srl %g1, 1, %g3
- add %g3, 1, %g3
- sllx %g3, 8, %g3 ! each fpregs frame is 256b
- add %g3, 192, %g3
- add %g6, %g3, %g3 ! where does task_struct+frame end?
- sub %g3, STACK_BIAS, %g3
- cmp %sp, %g3
- bg,pt %xcc, 1f
- nop
- lduh [%g6 + TI_CPU], %g1
- sethi %hi(hardirq_stack), %g3
- or %g3, %lo(hardirq_stack), %g3
- sllx %g1, 3, %g1
- ldx [%g3 + %g1], %g7
- sub %g7, STACK_BIAS, %g7
- cmp %sp, %g7
- bleu,pt %xcc, 2f
- sethi %hi(THREAD_SIZE), %g3
- add %g7, %g3, %g7
- cmp %sp, %g7
- blu,pn %xcc, 1f
-2: sethi %hi(softirq_stack), %g3
- or %g3, %lo(softirq_stack), %g3
- ldx [%g3 + %g1], %g7
- sub %g7, STACK_BIAS, %g7
- cmp %sp, %g7
- bleu,pt %xcc, 3f
- sethi %hi(THREAD_SIZE), %g3
- add %g7, %g3, %g7
- cmp %sp, %g7
- blu,pn %xcc, 1f
- nop
- /* If we are already on ovstack, don't hop onto it
- * again, we are already trying to output the stack overflow
- * message.
- */
-3: sethi %hi(ovstack), %g7 ! cant move to panic stack fast enough
- or %g7, %lo(ovstack), %g7
- add %g7, OVSTACKSIZE, %g3
- sub %g3, STACK_BIAS + 192, %g3
- sub %g7, STACK_BIAS, %g7
- cmp %sp, %g7
- blu,pn %xcc, 2f
- cmp %sp, %g3
- bleu,pn %xcc, 1f
- nop
-2: mov %g3, %sp
- sethi %hi(panicstring), %g3
- call prom_printf
- or %g3, %lo(panicstring), %o0
- call prom_halt
- nop
-1:
-#endif
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_DYNAMIC_FTRACE
- mov %o7, %o0
- .globl mcount_call
-mcount_call:
- call ftrace_stub
- mov %o0, %o7
+ /* Do nothing, the retl/nop below is all we need. */
#else
- sethi %hi(ftrace_trace_function), %g1
+ sethi %hi(function_trace_stop), %g1
+ lduw [%g1 + %lo(function_trace_stop)], %g2
+ brnz,pn %g2, 2f
+ sethi %hi(ftrace_trace_function), %g1
sethi %hi(ftrace_stub), %g2
ldx [%g1 + %lo(ftrace_trace_function)], %g1
or %g2, %lo(ftrace_stub), %g2
cmp %g1, %g2
be,pn %icc, 1f
- mov %i7, %o1
- jmpl %g1, %g0
- mov %o7, %o0
+ mov %i7, %g3
+ save %sp, -176, %sp
+ mov %g3, %o1
+ jmpl %g1, %o7
+ mov %i7, %o0
+ ret
+ restore
/* not reached */
1:
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ sethi %hi(ftrace_graph_return), %g1
+ ldx [%g1 + %lo(ftrace_graph_return)], %g3
+ cmp %g2, %g3
+ bne,pn %xcc, 5f
+ sethi %hi(ftrace_graph_entry_stub), %g2
+ sethi %hi(ftrace_graph_entry), %g1
+ or %g2, %lo(ftrace_graph_entry_stub), %g2
+ ldx [%g1 + %lo(ftrace_graph_entry)], %g1
+ cmp %g1, %g2
+ be,pt %xcc, 2f
+ nop
+5: mov %i7, %g2
+ mov %fp, %g3
+ save %sp, -176, %sp
+ mov %g2, %l0
+ ba,pt %xcc, ftrace_graph_caller
+ mov %g3, %l1
+#endif
+2:
#endif
#endif
retl
.globl ftrace_caller
.type ftrace_caller,#function
ftrace_caller:
- mov %i7, %o1
- mov %o7, %o0
+ sethi %hi(function_trace_stop), %g1
+ mov %i7, %g2
+ lduw [%g1 + %lo(function_trace_stop)], %g1
+ brnz,pn %g1, ftrace_stub
+ mov %fp, %g3
+ save %sp, -176, %sp
+ mov %g2, %o1
+ mov %g2, %l0
+ mov %g3, %l1
.globl ftrace_call
ftrace_call:
call ftrace_stub
- mov %o0, %o7
- retl
+ mov %i7, %o0
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ .globl ftrace_graph_call
+ftrace_graph_call:
+ call ftrace_stub
nop
+#endif
+ ret
+ restore
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ .size ftrace_graph_call,.-ftrace_graph_call
+#endif
+ .size ftrace_call,.-ftrace_call
.size ftrace_caller,.-ftrace_caller
#endif
#endif
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+ mov %l0, %o0
+ mov %i7, %o1
+ call prepare_ftrace_return
+ mov %l1, %o2
+ ret
+ restore %o0, -8, %i7
+END(ftrace_graph_caller)
+
+ENTRY(return_to_handler)
+ save %sp, -176, %sp
+ call ftrace_return_to_handler
+ mov %fp, %o0
+ jmpl %o0 + 8, %g0
+ restore
+END(return_to_handler)
+#endif
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/slab.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
#include <linux/bootmem.h>
#include <linux/pagemap.h>
#include <linux/poison.h>
+#include <linux/gfp.h>
#include <asm/sections.h>
#include <asm/system.h>
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
-#include <linux/slab.h>
#include <linux/initrd.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
#include <linux/percpu.h>
#include <linux/lmb.h>
#include <linux/mmzone.h>
+#include <linux/gfp.h>
#include <asm/head.h>
#include <asm/system.h>
"node=%d entry=%lu/%lu\n", start, block, nr,
node,
addr >> VMEMMAP_CHUNK_SHIFT,
- VMEMMAP_SIZE >> VMEMMAP_CHUNK_SHIFT);
+ VMEMMAP_SIZE);
}
}
return 0;
#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/seq_file.h>
#include <linux/kdebug.h>
#include <linux/log2.h>
+#include <linux/gfp.h>
#include <asm/bitext.h>
#include <asm/page.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/preempt.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/page.h>
#include <asm/tlbflush.h>
#include "linux/irqreturn.h"
#include "linux/kd.h"
#include "linux/sched.h"
+#include "linux/slab.h"
#include "chan_kern.h"
#include "irq_kern.h"
#include "irq_user.h"
#include <linux/platform_device.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include "init.h"
#include "irq_kern.h"
#include "linux/interrupt.h"
#include "linux/list.h"
#include "linux/mutex.h"
+#include "linux/slab.h"
#include "linux/workqueue.h"
#include "asm/atomic.h"
#include "init.h"
#include "linux/ctype.h"
#include "linux/capability.h"
#include "linux/mm.h"
+#include "linux/slab.h"
#include "linux/vmalloc.h"
#include "linux/blkpg.h"
#include "linux/genhd.h"
#include "linux/smp_lock.h"
#include "linux/ptrace.h"
#include "linux/sched.h"
+#include "linux/slab.h"
#include "asm/current.h"
#include "asm/processor.h"
#include "asm/uaccess.h"
#include "linux/module.h"
#include "linux/sched.h"
#include "linux/seq_file.h"
+#include "linux/slab.h"
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
#include <linux/stddef.h>
#include <linux/bootmem.h>
-#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/mm.h>
#include <linux/swap.h>
+#include <linux/slab.h>
#include <asm/fixmap.h>
#include <asm/page.h>
#include "as-layout.h"
#include <linux/stddef.h>
#include <linux/err.h>
#include <linux/hardirq.h>
-#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/personality.h>
#include <linux/proc_fs.h>
#include <linux/ptrace.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/tick.h>
*/
#include "linux/sched.h"
+#include "linux/slab.h"
#include "kern_util.h"
#include "os.h"
#include "skas.h"
#include "linux/mm.h"
#include "linux/sched.h"
+#include "linux/slab.h"
#include "asm/pgalloc.h"
#include "asm/pgtable.h"
#include "as-layout.h"
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/unistd.h>
#include "os.h"
#include "proc_mm.h"
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
- range 1 9
- default "9" if MAXSMP
+ range 1 10
+ default "10" if MAXSMP
default "6" if X86_64
default "4" if X86_NUMAQ
default "3"
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/i387.h>
struct crypto_fpu_ctx {
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/user.h>
-#include <linux/slab.h>
#include <linux/binfmts.h>
#include <linux/personality.h>
#include <linux/init.h>
.quad stub32_sigreturn
.quad stub32_clone /* 120 */
.quad sys_setdomainname
- .quad sys_uname
+ .quad sys_newuname
.quad sys_modify_ldt
.quad compat_sys_adjtimex
.quad sys32_mprotect /* 125 */
#include <linux/ptrace.h>
#include <linux/highuid.h>
#include <linux/sysctl.h>
+#include <linux/slab.h>
#include <asm/mman.h>
#include <asm/types.h>
#include <asm/uaccess.h>
#define _ASM_X86_AMD_IOMMU_TYPES_H
#include <linux/types.h>
+#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/spinlock.h>
/* constants to configure the command buffer */
#define CMD_BUFFER_SIZE 8192
+#define CMD_BUFFER_UNINITIALIZED 1
#define CMD_BUFFER_ENTRIES 512
#define MMIO_CMD_SIZE_SHIFT 56
#define MMIO_CMD_SIZE_512 (0x9ULL << MMIO_CMD_SIZE_SHIFT)
struct list_head list; /* for list of all protection domains */
struct list_head dev_list; /* List of all devices in this domain */
spinlock_t lock; /* mostly used to lock the page table*/
+ struct mutex api_lock; /* protect page tables in the iommu-api path */
u16 id; /* the domain id written to the device table */
int mode; /* paging mode (0-6 levels) */
u64 *pt_root; /* page table root pointer */
#endif
FIX_DBGP_BASE,
FIX_EARLYCON_MEM_BASE,
+#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
+ FIX_OHCI1394_BASE,
+#endif
#ifdef CONFIG_X86_LOCAL_APIC
FIX_APIC_BASE, /* local (CPU) APIC) -- required for SMP or not */
#endif
(__end_of_permanent_fixed_addresses & (TOTAL_FIX_BTMAPS - 1))
: __end_of_permanent_fixed_addresses,
FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
-#ifdef CONFIG_PROVIDE_OHCI1394_DMA_INIT
- FIX_OHCI1394_BASE,
-#endif
#ifdef CONFIG_X86_32
FIX_WP_TEST,
#endif
typedef int vector_irq_t[NR_VECTORS];
DECLARE_PER_CPU(vector_irq_t, vector_irq);
+extern void setup_vector_irq(int cpu);
#ifdef CONFIG_X86_IO_APIC
extern void lock_vector_lock(void);
extern void __iomem *early_memremap(resource_size_t phys_addr,
unsigned long size);
extern void early_iounmap(void __iomem *addr, unsigned long size);
+extern void fixup_early_ioremap(void);
#define IO_SPACE_LIMIT 0xffff
#ifndef __ASSEMBLY__
#include <asm/hw_irq.h>
-#include <asm/kvm_para.h>
/*G:030
* But first, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
- * We use the KVM hypercall mechanism, though completely different hypercall
- * numbers. Seventeen hypercalls are available: the hypercall number is put in
- * the %eax register, and the arguments (when required) are placed in %ebx,
- * %ecx, %edx and %esi. If a return value makes sense, it's returned in %eax.
+ * Our hypercall mechanism uses the highest unused trap code (traps 32 and
+ * above are used by real hardware interrupts). Seventeen hypercalls are
+ * available: the hypercall number is put in the %eax register, and the
+ * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
+ * If a return value makes sense, it's returned in %eax.
*
* Grossly invalid calls result in Sudden Death at the hands of the vengeful
* Host, rather than returning failure. This reflects Winston Churchill's
* definition of a gentleman: "someone who is only rude intentionally".
-:*/
+ */
+static inline unsigned long
+hcall(unsigned long call,
+ unsigned long arg1, unsigned long arg2, unsigned long arg3,
+ unsigned long arg4)
+{
+ /* "int" is the Intel instruction to trigger a trap. */
+ asm volatile("int $" __stringify(LGUEST_TRAP_ENTRY)
+ /* The call in %eax (aka "a") might be overwritten */
+ : "=a"(call)
+ /* The arguments are in %eax, %ebx, %ecx, %edx & %esi */
+ : "a"(call), "b"(arg1), "c"(arg2), "d"(arg3), "S"(arg4)
+ /* "memory" means this might write somewhere in memory.
+ * This isn't true for all calls, but it's safe to tell
+ * gcc that it might happen so it doesn't get clever. */
+ : "memory");
+ return call;
+}
/* Can't use our min() macro here: needs to be a constant */
#define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
#define MSR_AMD64_PATCH_LEVEL 0x0000008b
#define MSR_AMD64_NB_CFG 0xc001001f
#define MSR_AMD64_PATCH_LOADER 0xc0010020
+#define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140
+#define MSR_AMD64_OSVW_STATUS 0xc0010141
#define MSR_AMD64_IBSFETCHCTL 0xc0011030
#define MSR_AMD64_IBSFETCHLINAD 0xc0011031
#define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032
#include <asm/paravirt.h>
#include <linux/bitops.h>
-#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/memory.h>
#include <linux/stop_machine.h>
+#include <linux/slab.h>
#include <asm/alternative.h>
#include <asm/sections.h>
#include <asm/pgtable.h>
*/
#include <linux/pci.h>
-#include <linux/gfp.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
return false;
/* No device or no PCI device */
- if (!dev || dev->bus != &pci_bus_type)
+ if (dev->bus != &pci_bus_type)
return false;
devid = get_device_id(dev);
u32 tail, head;
u8 *target;
+ WARN_ON(iommu->cmd_buf_size & CMD_BUFFER_UNINITIALIZED);
tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
target = iommu->cmd_buf + tail;
memcpy_toio(target, cmd, sizeof(*cmd));
struct dma_ops_domain *dma_dom;
u16 devid;
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ for_each_pci_dev(dev) {
/* Do we handle this device? */
if (!check_device(&dev->dev))
list_for_each_entry_safe(dev_data, next, &domain->dev_list, list) {
struct device *dev = dev_data->dev;
- do_detach(dev);
+ __detach_device(dev);
atomic_set(&dev_data->bind, 0);
}
return NULL;
spin_lock_init(&domain->lock);
+ mutex_init(&domain->api_lock);
domain->id = domain_id_alloc();
if (!domain->id)
goto out_err;
free_pagetable(domain);
- domain_id_free(domain->id);
-
- kfree(domain);
+ protection_domain_free(domain);
dom->priv = NULL;
}
iova &= PAGE_MASK;
paddr &= PAGE_MASK;
+ mutex_lock(&domain->api_lock);
+
for (i = 0; i < npages; ++i) {
ret = iommu_map_page(domain, iova, paddr, prot, PM_MAP_4k);
if (ret)
paddr += PAGE_SIZE;
}
+ mutex_unlock(&domain->api_lock);
+
return 0;
}
iova &= PAGE_MASK;
+ mutex_lock(&domain->api_lock);
+
for (i = 0; i < npages; ++i) {
iommu_unmap_page(domain, iova, PM_MAP_4k);
iova += PAGE_SIZE;
}
iommu_flush_tlb_pde(domain);
+
+ mutex_unlock(&domain->api_lock);
}
static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
#include <linux/pci.h>
#include <linux/acpi.h>
-#include <linux/gfp.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/msi.h>
bool amd_iommu_np_cache __read_mostly;
/*
- * Set to true if ACPI table parsing and hardware intialization went properly
+ * The ACPI table parsing functions set this variable on an error
*/
-static bool amd_iommu_initialized;
+static int __initdata amd_iommu_init_err;
/*
* List of protection domains - used during resume
*/
for (i = 0; i < table->length; ++i)
checksum += p[i];
- if (checksum != 0)
+ if (checksum != 0) {
/* ACPI table corrupt */
- return -ENODEV;
+ amd_iommu_init_err = -ENODEV;
+ return 0;
+ }
p += IVRS_HEADER_LENGTH;
if (cmd_buf == NULL)
return NULL;
- iommu->cmd_buf_size = CMD_BUFFER_SIZE;
+ iommu->cmd_buf_size = CMD_BUFFER_SIZE | CMD_BUFFER_UNINITIALIZED;
return cmd_buf;
}
&entry, sizeof(entry));
amd_iommu_reset_cmd_buffer(iommu);
+ iommu->cmd_buf_size &= ~(CMD_BUFFER_UNINITIALIZED);
}
static void __init free_command_buffer(struct amd_iommu *iommu)
{
free_pages((unsigned long)iommu->cmd_buf,
- get_order(iommu->cmd_buf_size));
+ get_order(iommu->cmd_buf_size & ~(CMD_BUFFER_UNINITIALIZED)));
}
/* allocates the memory where the IOMMU will log its events to */
h->mmio_phys);
iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
- if (iommu == NULL)
- return -ENOMEM;
+ if (iommu == NULL) {
+ amd_iommu_init_err = -ENOMEM;
+ return 0;
+ }
+
ret = init_iommu_one(iommu, h);
- if (ret)
- return ret;
+ if (ret) {
+ amd_iommu_init_err = ret;
+ return 0;
+ }
break;
default:
break;
}
WARN_ON(p != end);
- amd_iommu_initialized = true;
-
return 0;
}
if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
return -ENODEV;
+ ret = amd_iommu_init_err;
+ if (ret)
+ goto out;
+
dev_table_size = tbl_size(DEV_TABLE_ENTRY_SIZE);
alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
if (acpi_table_parse("IVRS", init_iommu_all) != 0)
goto free;
- if (!amd_iommu_initialized)
+ if (amd_iommu_init_err) {
+ ret = amd_iommu_init_err;
goto free;
+ }
if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
goto free;
+ if (amd_iommu_init_err) {
+ ret = amd_iommu_init_err;
+ goto free;
+ }
+
ret = sysdev_class_register(&amd_iommu_sysdev_class);
if (ret)
goto free;
if (ret)
goto free;
+ enable_iommus();
+
if (iommu_pass_through)
ret = amd_iommu_init_passthrough();
else
amd_iommu_init_notifier();
- enable_iommus();
-
if (iommu_pass_through)
goto out;
return ret;
free:
+ disable_iommus();
amd_iommu_uninit_devices();
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/sfi.h>
static __init int apbt_late_init(void)
{
- if (disable_apbt_percpu)
+ if (disable_apbt_percpu || !apb_timer_block_enabled)
return 0;
/* This notifier should be called after workqueue is ready */
hotcpu_notifier(apbt_cpuhp_notify, -20);
for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
int bus;
int dev_base, dev_limit;
+ u32 ctl;
bus = bus_dev_ranges[i].bus;
dev_base = bus_dev_ranges[i].dev_base;
gart_iommu_aperture = 1;
x86_init.iommu.iommu_init = gart_iommu_init;
- aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+ ctl = read_pci_config(bus, slot, 3,
+ AMD64_GARTAPERTURECTL);
+
+ /*
+ * Before we do anything else disable the GART. It may
+ * still be enabled if we boot into a crash-kernel here.
+ * Reconfiguring the GART while it is enabled could have
+ * unknown side-effects.
+ */
+ ctl &= ~GARTEN;
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+
+ aper_order = (ctl >> 1) & 7;
aper_size = (32 * 1024 * 1024) << aper_order;
aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
aper_base <<= 25;
}
#endif
+#ifndef CONFIG_SMP
enable_IR_x2apic();
default_setup_apic_routing();
+#endif
verify_local_APIC();
connect_bsp_APIC();
#include <linux/errno.h>
#include <linux/acpi.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/nmi.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <linux/jiffies.h> /* time_after() */
+#include <linux/slab.h>
#ifdef CONFIG_ACPI
#include <acpi/acpi_bus.h>
#endif
/* Mark the inuse vectors */
for_each_irq_desc(irq, desc) {
cfg = desc->chip_data;
+
+ /*
+ * If it is a legacy IRQ handled by the legacy PIC, this cpu
+ * will be part of the irq_cfg's domain.
+ */
+ if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq))
+ cpumask_set_cpu(cpu, cfg->domain);
+
if (!cpumask_test_cpu(cpu, cfg->domain))
continue;
vector = cfg->vector;
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg = desc->chip_data;
+ if (!cfg)
+ return;
+
__irq_complete_move(&desc, cfg->vector);
}
#else
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/sysdev.h>
#include <linux/sysctl.h>
#include <linux/percpu.h>
#include <linux/ctype.h>
#include <linux/sched.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/acpi.h>
#include <asm/io.h>
#include <linux/cpufreq.h>
#include <linux/compiler.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <trace/events/power.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/cpufreq.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <asm/processor-cyrix.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/cpufreq.h>
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/cpufreq.h>
-#include <linux/slab.h>
#include <linux/cpumask.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/compiler.h>
+#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/timex.h>
#include <linux/io.h>
powernow_table[i].index = index;
/* Frequency may be rounded for these */
- if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+ if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
+ || boot_cpu_data.x86 == 0x11) {
powernow_table[i].frequency =
freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
} else
#include <linux/sched.h> /* current */
#include <linux/delay.h>
#include <linux/compiler.h>
+#include <linux/gfp.h>
#include <asm/msr.h>
#include <asm/processor.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/sched.h>
#include "speedstep-lib.h"
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/slab.h>
#include <asm/msr.h>
#include <asm/tsc.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/ist.h>
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+ /*
+ * Atom erratum AAE44/AAF40/AAG38/AAH41:
+ *
+ * A race condition between speculative fetches and invalidating
+ * a large page. This is worked around in microcode, but we
+ * need the microcode to have already been loaded... so if it is
+ * not, recommend a BIOS update and disable large pages.
+ */
+ if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_mask <= 2) {
+ u32 ucode, junk;
+
+ wrmsr(MSR_IA32_UCODE_REV, 0, 0);
+ sync_core();
+ rdmsr(MSR_IA32_UCODE_REV, junk, ucode);
+
+ if (ucode < 0x20e) {
+ printk(KERN_WARNING "Atom PSE erratum detected, BIOS microcode update recommended\n");
+ clear_cpu_cap(c, X86_FEATURE_PSE);
+ }
+ }
+
#ifdef CONFIG_X86_64
set_cpu_cap(c, X86_FEATURE_SYSENTER32);
#else
#include <linux/kdebug.h>
#include <linux/cpu.h>
#include <linux/sched.h>
+#include <linux/gfp.h>
#include <asm/mce.h>
#include <asm/apic.h>
#include <linux/sched.h>
#include <linux/sysfs.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/poll.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/smp.h>
* Author: Andi Kleen
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/init.h>
#define LINE_SIZE 80
#include <linux/kdebug.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/cpu.h>
#include <linux/bitops.h>
#include <asm/apic.h>
#include <asm/stacktrace.h>
#include <asm/nmi.h>
+#include <asm/compat.h>
static u64 perf_event_mask __read_mostly;
struct perf_event *event);
struct event_constraint *event_constraints;
- void (*cpu_prepare)(int cpu);
+ int (*cpu_prepare)(int cpu);
void (*cpu_starting)(int cpu);
void (*cpu_dying)(int cpu);
void (*cpu_dead)(int cpu);
x86_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu)
{
unsigned int cpu = (long)hcpu;
+ int ret = NOTIFY_OK;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_UP_PREPARE:
if (x86_pmu.cpu_prepare)
- x86_pmu.cpu_prepare(cpu);
+ ret = x86_pmu.cpu_prepare(cpu);
break;
case CPU_STARTING:
x86_pmu.cpu_dying(cpu);
break;
+ case CPU_UP_CANCELED:
case CPU_DEAD:
if (x86_pmu.cpu_dead)
x86_pmu.cpu_dead(cpu);
break;
}
- return NOTIFY_OK;
+ return ret;
}
static void __init pmu_check_apic(void)
return len;
}
-static int copy_stack_frame(const void __user *fp, struct stack_frame *frame)
+#ifdef CONFIG_COMPAT
+static inline int
+perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
{
- unsigned long bytes;
+ /* 32-bit process in 64-bit kernel. */
+ struct stack_frame_ia32 frame;
+ const void __user *fp;
- bytes = copy_from_user_nmi(frame, fp, sizeof(*frame));
+ if (!test_thread_flag(TIF_IA32))
+ return 0;
+
+ fp = compat_ptr(regs->bp);
+ while (entry->nr < PERF_MAX_STACK_DEPTH) {
+ unsigned long bytes;
+ frame.next_frame = 0;
+ frame.return_address = 0;
+
+ bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+ if (bytes != sizeof(frame))
+ break;
+
+ if (fp < compat_ptr(regs->sp))
+ break;
- return bytes == sizeof(*frame);
+ callchain_store(entry, frame.return_address);
+ fp = compat_ptr(frame.next_frame);
+ }
+ return 1;
+}
+#else
+static inline int
+perf_callchain_user32(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+ return 0;
}
+#endif
static void
perf_callchain_user(struct pt_regs *regs, struct perf_callchain_entry *entry)
callchain_store(entry, PERF_CONTEXT_USER);
callchain_store(entry, regs->ip);
+ if (perf_callchain_user32(regs, entry))
+ return;
+
while (entry->nr < PERF_MAX_STACK_DEPTH) {
+ unsigned long bytes;
frame.next_frame = NULL;
frame.return_address = 0;
- if (!copy_stack_frame(fp, &frame))
+ bytes = copy_from_user_nmi(&frame, fp, sizeof(frame));
+ if (bytes != sizeof(frame))
break;
if ((unsigned long)fp < regs->sp)
return entry;
}
-#ifdef CONFIG_EVENT_TRACING
void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
{
regs->ip = ip;
regs->cs = __KERNEL_CS;
local_save_flags(regs->flags);
}
-#endif
return (hwc->config & 0xe0) == 0xe0;
}
+static inline int amd_has_nb(struct cpu_hw_events *cpuc)
+{
+ struct amd_nb *nb = cpuc->amd_nb;
+
+ return nb && nb->nb_id != -1;
+}
+
static void amd_put_event_constraints(struct cpu_hw_events *cpuc,
struct perf_event *event)
{
/*
* only care about NB events
*/
- if (!(nb && amd_is_nb_event(hwc)))
+ if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
return;
/*
/*
* if not NB event or no NB, then no constraints
*/
- if (!(nb && amd_is_nb_event(hwc)))
+ if (!(amd_has_nb(cpuc) && amd_is_nb_event(hwc)))
return &unconstrained;
/*
return nb;
}
-static void amd_pmu_cpu_online(int cpu)
+static int amd_pmu_cpu_prepare(int cpu)
+{
+ struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
+
+ WARN_ON_ONCE(cpuc->amd_nb);
+
+ if (boot_cpu_data.x86_max_cores < 2)
+ return NOTIFY_OK;
+
+ cpuc->amd_nb = amd_alloc_nb(cpu, -1);
+ if (!cpuc->amd_nb)
+ return NOTIFY_BAD;
+
+ return NOTIFY_OK;
+}
+
+static void amd_pmu_cpu_starting(int cpu)
{
- struct cpu_hw_events *cpu1, *cpu2;
- struct amd_nb *nb = NULL;
+ struct cpu_hw_events *cpuc = &per_cpu(cpu_hw_events, cpu);
+ struct amd_nb *nb;
int i, nb_id;
if (boot_cpu_data.x86_max_cores < 2)
return;
- /*
- * function may be called too early in the
- * boot process, in which case nb_id is bogus
- */
nb_id = amd_get_nb_id(cpu);
- if (nb_id == BAD_APICID)
- return;
-
- cpu1 = &per_cpu(cpu_hw_events, cpu);
- cpu1->amd_nb = NULL;
+ WARN_ON_ONCE(nb_id == BAD_APICID);
raw_spin_lock(&amd_nb_lock);
for_each_online_cpu(i) {
- cpu2 = &per_cpu(cpu_hw_events, i);
- nb = cpu2->amd_nb;
- if (!nb)
+ nb = per_cpu(cpu_hw_events, i).amd_nb;
+ if (WARN_ON_ONCE(!nb))
continue;
- if (nb->nb_id == nb_id)
- goto found;
- }
- nb = amd_alloc_nb(cpu, nb_id);
- if (!nb) {
- pr_err("perf_events: failed NB allocation for CPU%d\n", cpu);
- raw_spin_unlock(&amd_nb_lock);
- return;
+ if (nb->nb_id == nb_id) {
+ kfree(cpuc->amd_nb);
+ cpuc->amd_nb = nb;
+ break;
+ }
}
-found:
- nb->refcnt++;
- cpu1->amd_nb = nb;
+
+ cpuc->amd_nb->nb_id = nb_id;
+ cpuc->amd_nb->refcnt++;
raw_spin_unlock(&amd_nb_lock);
}
-static void amd_pmu_cpu_offline(int cpu)
+static void amd_pmu_cpu_dead(int cpu)
{
struct cpu_hw_events *cpuhw;
raw_spin_lock(&amd_nb_lock);
- if (--cpuhw->amd_nb->refcnt == 0)
- kfree(cpuhw->amd_nb);
+ if (cpuhw->amd_nb) {
+ struct amd_nb *nb = cpuhw->amd_nb;
+
+ if (nb->nb_id == -1 || --nb->refcnt == 0)
+ kfree(nb);
- cpuhw->amd_nb = NULL;
+ cpuhw->amd_nb = NULL;
+ }
raw_spin_unlock(&amd_nb_lock);
}
.get_event_constraints = amd_get_event_constraints,
.put_event_constraints = amd_put_event_constraints,
- .cpu_prepare = amd_pmu_cpu_online,
- .cpu_dead = amd_pmu_cpu_offline,
+ .cpu_prepare = amd_pmu_cpu_prepare,
+ .cpu_starting = amd_pmu_cpu_starting,
+ .cpu_dead = amd_pmu_cpu_dead,
};
static __init int amd_pmu_init(void)
case 26: /* 45 nm nehalem, "Bloomfield" */
case 30: /* 45 nm nehalem, "Lynnfield" */
+ case 46: /* 45 nm nehalem-ex, "Beckton" */
memcpy(hw_cache_event_ids, nehalem_hw_cache_event_ids,
sizeof(hw_cache_event_ids));
*/
#include <linux/dmi.h>
+#include <linux/module.h>
#include <asm/div64.h>
#include <asm/vmware.h>
#include <asm/x86_init.h>
return 0;
}
+EXPORT_SYMBOL(vmware_platform);
/*
* VMware hypervisor takes care of exporting a reliable TSC to the guest.
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/uaccess.h>
+#include <linux/gfp.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/cpu.h>
#include <asm/reboot.h>
#include <asm/virtext.h>
-#include <asm/x86_init.h>
#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
#ifdef CONFIG_HPET_TIMER
hpet_disable();
#endif
-
-#ifdef CONFIG_X86_64
- x86_platform.iommu_shutdown();
-#endif
-
crash_save_cpu(regs, safe_smp_processor_id());
}
* Copyright (C) IBM Corporation, 2004. All rights reserved
*/
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/highmem.h>
#include <linux/crash_dump.h>
#define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
#endif
+#include <linux/uaccess.h>
+
extern void
show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, unsigned long bp, char *log_lvl);
unsigned long return_address;
};
+struct stack_frame_ia32 {
+ u32 next_frame;
+ u32 return_address;
+};
+
static inline unsigned long rewind_frame_pointer(int n)
{
struct stack_frame *frame;
get_bp(frame);
#ifdef CONFIG_FRAME_POINTER
- while (n--)
- frame = frame->next_frame;
+ while (n--) {
+ if (probe_kernel_address(&frame->next_frame, frame))
+ break;
+ }
#endif
return (unsigned long)frame;
printk(KERN_DEBUG "e820 remove range: %016Lx - %016Lx ",
(unsigned long long) start,
(unsigned long long) end);
- e820_print_type(old_type);
+ if (checktype)
+ e820_print_type(old_type);
printk(KERN_CONT "\n");
for (i = 0; i < e820.nr_map; i++) {
struct e820entry *ei = &e820.map[i];
u64 final_start, final_end;
+ u64 ei_end;
if (checktype && ei->type != old_type)
continue;
+
+ ei_end = ei->addr + ei->size;
/* totally covered? */
- if (ei->addr >= start &&
- (ei->addr + ei->size) <= (start + size)) {
+ if (ei->addr >= start && ei_end <= end) {
real_removed_size += ei->size;
memset(ei, 0, sizeof(struct e820entry));
continue;
}
+
+ /* new range is totally covered? */
+ if (ei->addr < start && ei_end > end) {
+ e820_add_region(end, ei_end - end, ei->type);
+ ei->size = start - ei->addr;
+ real_removed_size += size;
+ continue;
+ }
+
/* partially covered */
final_start = max(start, ei->addr);
- final_end = min(start + size, ei->addr + ei->size);
+ final_end = min(end, ei_end);
if (final_start >= final_end)
continue;
real_removed_size += final_end - final_start;
+ /*
+ * left range could be head or tail, so need to update
+ * size at first.
+ */
ei->size -= final_end - final_start;
if (ei->addr < final_start)
continue;
#include <linux/init.h>
#include <linux/start_kernel.h>
+#include <linux/mm.h>
#include <asm/setup.h>
#include <asm/sections.h>
#ifdef CONFIG_BLK_DEV_INITRD
/* Reserve INITRD */
if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+ /* Assume only end is not page aligned */
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
- u64 ramdisk_end = ramdisk_image + ramdisk_size;
+ u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
}
#endif
#ifdef CONFIG_BLK_DEV_INITRD
/* Reserve INITRD */
if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
+ /* Assume only end is not page aligned */
unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
unsigned long ramdisk_size = boot_params.hdr.ramdisk_size;
- unsigned long ramdisk_end = ramdisk_image + ramdisk_size;
+ unsigned long ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
}
#endif
#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/hpet.h>
#include <linux/init.h>
#include <linux/cpu.h>
* then we might have a real hardware problem. We can not do
* much about it here, but at least alert the user/admin with
* a prominent warning.
+ * An erratum on some chipsets (ICH9,..), results in comparator read
+ * immediately following a write returning old value. Workaround
+ * for this is to read this value second time, when first
+ * read returns old value.
*/
- WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
+ if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
+ WARN_ONCE(hpet_readl(HPET_Tn_CMP(timer)) != cnt,
KERN_WARNING "hpet: compare register read back failed.\n");
+ }
return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
}
do_div(clc, freq);
clc >>= hpet_clockevent.shift;
hpet_pie_delta = clc;
+ hpet_pie_limit = 0;
}
return 1;
}
#include <linux/module.h>
#include <linux/regset.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/sigcontext.h>
#include <asm/processor.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/kprobes.h>
#include <linux/init.h>
x86_init.irqs.intr_init();
}
+/*
+ * Setup the vector to irq mappings.
+ */
+void setup_vector_irq(int cpu)
+{
+#ifndef CONFIG_X86_IO_APIC
+ int irq;
+
+ /*
+ * On most of the platforms, legacy PIC delivers the interrupts on the
+ * boot cpu. But there are certain platforms where PIC interrupts are
+ * delivered to multiple cpu's. If the legacy IRQ is handled by the
+ * legacy PIC, for the new cpu that is coming online, setup the static
+ * legacy vector to irq mapping:
+ */
+ for (irq = 0; irq < legacy_pic->nr_legacy_irqs; irq++)
+ per_cpu(vector_irq, cpu)[IRQ0_VECTOR + irq] = irq;
+#endif
+
+ __setup_vector_irq(cpu);
+}
+
static void __init smp_intr_init(void)
{
#ifdef CONFIG_SMP
* Shared support code for AMD K8 northbridges and derivates.
* Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
*/
-#include <linux/gfp.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/stat.h>
#include <linux/io.h>
* portion of kgdb because this operation requires mutexs to
* complete.
*/
+ hw_breakpoint_init(&attr);
attr.bp_addr = (unsigned long)kgdb_arch_init;
- attr.type = PERF_TYPE_BREAKPOINT;
attr.bp_len = HW_BREAKPOINT_LEN_1;
attr.bp_type = HW_BREAKPOINT_W;
attr.disabled = 1;
*/
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/mm.h>
#include <linux/kexec.h>
#include <linux/string.h>
+#include <linux/gfp.h>
#include <linux/reboot.h>
#include <linux/numa.h>
#include <linux/ftrace.h>
#include <linux/kernel.h>
#include <linux/mca.h>
#include <linux/kprobes.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
#include <linux/bug.h>
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/page.h>
{
unsigned long size = get_mpc_size(mpf->physptr);
- reserve_early(mpf->physptr, mpf->physptr+size, "MP-table mpc");
+ reserve_early_overlap_ok(mpf->physptr, mpf->physptr+size, "MP-table mpc");
}
static int __init smp_scan_config(unsigned long base, unsigned long length)
mpf, (u64)virt_to_phys(mpf));
mem = virt_to_phys(mpf);
- reserve_early(mem, mem + sizeof(*mpf), "MP-table mpf");
+ reserve_early_overlap_ok(mem, mem + sizeof(*mpf), "MP-table mpf");
if (mpf->physptr)
smp_reserve_memory(mpf);
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/uaccess.h>
+#include <linux/gfp.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <linux/dma-debug.h>
#include <linux/dmar.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/kmemleak.h>
#include <linux/iommu-helper.h>
#include <linux/sysdev.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/atomic.h>
#include <asm/mtrr.h>
#include <asm/pgtable.h>
enable_gart_translation(dev, __pa(agp_gatt_table));
}
+
+ /* Flush the GART-TLB to remove stale entries */
+ k8_flush_garts();
}
/*
#include <linux/scatterlist.h>
#include <linux/string.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/mm.h>
}
/*
- * Check for AMD CPUs, which have potentially C1E support
+ * Check for AMD CPUs, where APIC timer interrupt does not wake up CPU from C1e.
+ * For more information see
+ * - Erratum #400 for NPT family 0xf and family 0x10 CPUs
+ * - Erratum #365 for family 0x11 (not affected because C1e not in use)
*/
static int __cpuinit check_c1e_idle(const struct cpuinfo_x86 *c)
{
+ u64 val;
if (c->x86_vendor != X86_VENDOR_AMD)
- return 0;
-
- if (c->x86 < 0x0F)
- return 0;
+ goto no_c1e_idle;
/* Family 0x0f models < rev F do not have C1E */
- if (c->x86 == 0x0f && c->x86_model < 0x40)
- return 0;
+ if (c->x86 == 0x0F && c->x86_model >= 0x40)
+ return 1;
- return 1;
+ if (c->x86 == 0x10) {
+ /*
+ * check OSVW bit for CPUs that are not affected
+ * by erratum #400
+ */
+ rdmsrl(MSR_AMD64_OSVW_ID_LENGTH, val);
+ if (val >= 2) {
+ rdmsrl(MSR_AMD64_OSVW_STATUS, val);
+ if (!(val & BIT(1)))
+ goto no_c1e_idle;
+ }
+ return 1;
+ }
+
+no_c1e_idle:
+ return 0;
}
static cpumask_var_t c1e_mask;
set_tsk_thread_flag(p, TIF_FORK);
- p->thread.fs = me->thread.fs;
- p->thread.gs = me->thread.gs;
p->thread.io_bitmap_ptr = NULL;
savesegment(gs, p->thread.gsindex);
+ p->thread.gs = p->thread.gsindex ? 0 : me->thread.gs;
savesegment(fs, p->thread.fsindex);
+ p->thread.fs = p->thread.fsindex ? 0 : me->thread.fs;
savesegment(es, p->thread.es);
savesegment(ds, p->thread.ds);
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/ptrace.h>
#include <linux/regset.h>
#include <linux/tracehook.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/user.h>
#include <linux/delay.h>
#define MAX_MAP_CHUNK (NR_FIX_BTMAPS << PAGE_SHIFT)
static void __init relocate_initrd(void)
{
-
+ /* Assume only end is not page aligned */
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
+ u64 area_size = PAGE_ALIGN(ramdisk_size);
u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
u64 ramdisk_here;
unsigned long slop, clen, mapaddr;
char *p, *q;
/* We need to move the initrd down into lowmem */
- ramdisk_here = find_e820_area(0, end_of_lowmem, ramdisk_size,
+ ramdisk_here = find_e820_area(0, end_of_lowmem, area_size,
PAGE_SIZE);
if (ramdisk_here == -1ULL)
/* Note: this includes all the lowmem currently occupied by
the initrd, we rely on that fact to keep the data intact. */
- reserve_early(ramdisk_here, ramdisk_here + ramdisk_size,
+ reserve_early(ramdisk_here, ramdisk_here + area_size,
"NEW RAMDISK");
initrd_start = ramdisk_here + PAGE_OFFSET;
initrd_end = initrd_start + ramdisk_size;
static void __init reserve_initrd(void)
{
+ /* Assume only end is not page aligned */
u64 ramdisk_image = boot_params.hdr.ramdisk_image;
u64 ramdisk_size = boot_params.hdr.ramdisk_size;
- u64 ramdisk_end = ramdisk_image + ramdisk_size;
+ u64 ramdisk_end = PAGE_ALIGN(ramdisk_image + ramdisk_size);
u64 end_of_lowmem = max_low_pfn_mapped << PAGE_SHIFT;
if (!boot_params.hdr.type_of_loader ||
early_param("elfcorehdr", setup_elfcorehdr);
#endif
+static __init void reserve_ibft_region(void)
+{
+ unsigned long addr, size = 0;
+
+ addr = find_ibft_region(&size);
+
+ if (size)
+ reserve_early_overlap_ok(addr, addr + size, "ibft");
+}
+
#ifdef CONFIG_X86_RESERVE_LOW_64K
static int __init dmi_low_memory_corruption(const struct dmi_system_id *d)
{
*/
find_smp_config();
+ reserve_ibft_region();
+
reserve_trampoline_memory();
#ifdef CONFIG_ACPI_SLEEP
dma32_reserve_bootmem();
- reserve_ibft_region();
-
#ifdef CONFIG_KVM_CLOCK
kvmclock_init();
#endif
#include <linux/cache.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
+#include <linux/gfp.h>
#include <asm/mtrr.h>
#include <asm/tlbflush.h>
#include <linux/nmi.h>
#include <linux/tboot.h>
#include <linux/stackprotector.h>
+#include <linux/gfp.h>
#include <asm/acpi.h>
#include <asm/desc.h>
end_local_APIC_setup();
map_cpu_to_logical_apicid();
- notify_cpu_starting(cpuid);
-
/*
* Need to setup vector mappings before we enable interrupts.
*/
- __setup_vector_irq(smp_processor_id());
+ setup_vector_irq(smp_processor_id());
/*
* Get our bogomips.
*
*/
smp_store_cpu_info(cpuid);
+ notify_cpu_starting(cpuid);
+
/*
* Allow the master to continue.
*/
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <asm/mmu_context.h>
#include <asm/uv/uv.h>
#include <linux/module.h>
#include <linux/rbtree.h>
+#include <linux/slab.h>
#include <linux/irq.h>
#include <asm/apic.h>
* Copyright (c) Dimitri Sivanich
*/
#include <linux/clockchips.h>
+#include <linux/slab.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/sched.h>
+#include <linux/gfp.h>
#include <asm/vmi.h>
#include <asm/io.h>
#include <asm/fixmap.h>
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
- __smp_locks_end = .;
. = ALIGN(PAGE_SIZE);
+ __smp_locks_end = .;
}
#ifdef CONFIG_X86_64
#define pr_fmt(fmt) "pit: " fmt
#include <linux/kvm_host.h>
+#include <linux/slab.h>
#include "irq.h"
#include "i8254.h"
* Port from Qemu.
*/
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/bitops.h>
#include "irq.h"
#include <linux/io.h>
#include <linux/module.h>
#include <linux/math64.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/page.h>
#include <linux/hugetlb.h>
#include <linux/compiler.h>
#include <linux/srcu.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <asm/cmpxchg.h>
for_each_sp(pages, sp, parents, i) {
kvm_mmu_zap_page(kvm, sp);
mmu_pages_clear_parents(&parents);
+ zapped++;
}
- zapped += pages.nr;
kvm_mmu_pages_init(parent, &parents, &pages);
}
*/
if (used_pages > kvm_nr_mmu_pages) {
- while (used_pages > kvm_nr_mmu_pages) {
+ while (used_pages > kvm_nr_mmu_pages &&
+ !list_empty(&kvm->arch.active_mmu_pages)) {
struct kvm_mmu_page *page;
page = container_of(kvm->arch.active_mmu_pages.prev,
struct kvm_mmu_page, link);
- kvm_mmu_zap_page(kvm, page);
+ used_pages -= kvm_mmu_zap_page(kvm, page);
used_pages--;
}
+ kvm_nr_mmu_pages = used_pages;
kvm->arch.n_free_mmu_pages = 0;
}
else
&& !sp->role.invalid) {
pgprintk("%s: zap %lx %x\n",
__func__, gfn, sp->role.word);
- kvm_mmu_zap_page(kvm, sp);
+ if (kvm_mmu_zap_page(kvm, sp))
+ nn = bucket->first;
}
}
}
#include <linux/highmem.h>
#include <linux/sched.h>
#include <linux/ftrace_event.h>
+#include <linux/slab.h>
#include <asm/desc.h>
if (err)
goto free_svm;
+ err = -ENOMEM;
page = alloc_page(GFP_KERNEL);
- if (!page) {
- err = -ENOMEM;
+ if (!page)
goto uninit;
- }
- err = -ENOMEM;
msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
if (!msrpm_pages)
- goto uninit;
+ goto free_page1;
nested_msrpm_pages = alloc_pages(GFP_KERNEL, MSRPM_ALLOC_ORDER);
if (!nested_msrpm_pages)
- goto uninit;
-
- svm->msrpm = page_address(msrpm_pages);
- svm_vcpu_init_msrpm(svm->msrpm);
+ goto free_page2;
hsave_page = alloc_page(GFP_KERNEL);
if (!hsave_page)
- goto uninit;
+ goto free_page3;
+
svm->nested.hsave = page_address(hsave_page);
+ svm->msrpm = page_address(msrpm_pages);
+ svm_vcpu_init_msrpm(svm->msrpm);
+
svm->nested.msrpm = page_address(nested_msrpm_pages);
svm->vmcb = page_address(page);
return &svm->vcpu;
+free_page3:
+ __free_pages(nested_msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page2:
+ __free_pages(msrpm_pages, MSRPM_ALLOC_ORDER);
+free_page1:
+ __free_page(page);
uninit:
kvm_vcpu_uninit(&svm->vcpu);
free_svm:
#include <linux/sched.h>
#include <linux/moduleparam.h>
#include <linux/ftrace_event.h>
+#include <linux/slab.h>
#include "kvm_cache_regs.h"
#include "x86.h"
#define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
#define KVM_RMODE_VM_CR4_ALWAYS_ON (X86_CR4_VME | X86_CR4_PAE | X86_CR4_VMXE)
+#define RMODE_GUEST_OWNED_EFLAGS_BITS (~(X86_EFLAGS_IOPL | X86_EFLAGS_VM))
+
/*
* These 2 parameters are used to config the controls for Pause-Loop Exiting:
* ple_gap: upper bound on the amount of time between two successive
} host_state;
struct {
int vm86_active;
- u8 save_iopl;
+ ulong save_rflags;
struct kvm_save_segment {
u16 selector;
unsigned long base;
static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
{
- unsigned long rflags;
+ unsigned long rflags, save_rflags;
rflags = vmcs_readl(GUEST_RFLAGS);
- if (to_vmx(vcpu)->rmode.vm86_active)
- rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+ if (to_vmx(vcpu)->rmode.vm86_active) {
+ rflags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+ save_rflags = to_vmx(vcpu)->rmode.save_rflags;
+ rflags |= save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
+ }
return rflags;
}
static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
{
- if (to_vmx(vcpu)->rmode.vm86_active)
+ if (to_vmx(vcpu)->rmode.vm86_active) {
+ to_vmx(vcpu)->rmode.save_rflags = rflags;
rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
+ }
vmcs_writel(GUEST_RFLAGS, rflags);
}
vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
flags = vmcs_readl(GUEST_RFLAGS);
- flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
- flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
+ flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
+ flags |= vmx->rmode.save_rflags & ~RMODE_GUEST_OWNED_EFLAGS_BITS;
vmcs_writel(GUEST_RFLAGS, flags);
vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
flags = vmcs_readl(GUEST_RFLAGS);
- vmx->rmode.save_iopl
- = (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
+ vmx->rmode.save_rflags = flags;
flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
#include <linux/cpufreq.h>
#include <linux/user-return-notifier.h>
#include <linux/srcu.h>
+#include <linux/slab.h>
#include <trace/events/kvm.h>
#undef TRACE_INCLUDE_FILE
#define CREATE_TRACE_POINTS
#ifdef CONFIG_X86_64
if (cr0 & 0xffffffff00000000UL) {
- printk(KERN_DEBUG "set_cr0: 0x%lx #GP, reserved bits 0x%lx\n",
- cr0, kvm_read_cr0(vcpu));
kvm_inject_gp(vcpu, 0);
return;
}
cr0 &= ~CR0_RESERVED_BITS;
if ((cr0 & X86_CR0_NW) && !(cr0 & X86_CR0_CD)) {
- printk(KERN_DEBUG "set_cr0: #GP, CD == 0 && NW == 1\n");
kvm_inject_gp(vcpu, 0);
return;
}
if ((cr0 & X86_CR0_PG) && !(cr0 & X86_CR0_PE)) {
- printk(KERN_DEBUG "set_cr0: #GP, set PG flag "
- "and a clear PE flag\n");
kvm_inject_gp(vcpu, 0);
return;
}
int cs_db, cs_l;
if (!is_pae(vcpu)) {
- printk(KERN_DEBUG "set_cr0: #GP, start paging "
- "in long mode while PAE is disabled\n");
kvm_inject_gp(vcpu, 0);
return;
}
kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
if (cs_l) {
- printk(KERN_DEBUG "set_cr0: #GP, start paging "
- "in long mode while CS.L == 1\n");
kvm_inject_gp(vcpu, 0);
return;
} else
#endif
if (is_pae(vcpu) && !load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_DEBUG "set_cr0: #GP, pdptrs "
- "reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
if (cr4 & CR4_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_long_mode(vcpu)) {
if (!(cr4 & X86_CR4_PAE)) {
- printk(KERN_DEBUG "set_cr4: #GP, clearing PAE while "
- "in long mode\n");
kvm_inject_gp(vcpu, 0);
return;
}
} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
&& ((cr4 ^ old_cr4) & pdptr_bits)
&& !load_pdptrs(vcpu, vcpu->arch.cr3)) {
- printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (cr4 & X86_CR4_VMXE) {
- printk(KERN_DEBUG "set_cr4: #GP, setting VMXE\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_long_mode(vcpu)) {
if (cr3 & CR3_L_MODE_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr3: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
} else {
if (is_pae(vcpu)) {
if (cr3 & CR3_PAE_RESERVED_BITS) {
- printk(KERN_DEBUG
- "set_cr3: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (is_paging(vcpu) && !load_pdptrs(vcpu, cr3)) {
- printk(KERN_DEBUG "set_cr3: #GP, pdptrs "
- "reserved bits\n");
kvm_inject_gp(vcpu, 0);
return;
}
void kvm_set_cr8(struct kvm_vcpu *vcpu, unsigned long cr8)
{
if (cr8 & CR8_RESERVED_BITS) {
- printk(KERN_DEBUG "set_cr8: #GP, reserved bits 0x%lx\n", cr8);
kvm_inject_gp(vcpu, 0);
return;
}
static void set_efer(struct kvm_vcpu *vcpu, u64 efer)
{
if (efer & efer_reserved_bits) {
- printk(KERN_DEBUG "set_efer: 0x%llx #GP, reserved bits\n",
- efer);
kvm_inject_gp(vcpu, 0);
return;
}
if (is_paging(vcpu)
&& (vcpu->arch.efer & EFER_LME) != (efer & EFER_LME)) {
- printk(KERN_DEBUG "set_efer: #GP, change LME while paging\n");
kvm_inject_gp(vcpu, 0);
return;
}
feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
if (!feat || !(feat->edx & bit(X86_FEATURE_FXSR_OPT))) {
- printk(KERN_DEBUG "set_efer: #GP, enable FFXSR w/o CPUID capability\n");
kvm_inject_gp(vcpu, 0);
return;
}
feat = kvm_find_cpuid_entry(vcpu, 0x80000001, 0);
if (!feat || !(feat->ecx & bit(X86_FEATURE_SVM))) {
- printk(KERN_DEBUG "set_efer: #GP, enable SVM w/o SVM\n");
kvm_inject_gp(vcpu, 0);
return;
}
if (msr >= MSR_IA32_MC0_CTL &&
msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
u32 offset = msr - MSR_IA32_MC0_CTL;
- /* only 0 or all 1s can be written to IA32_MCi_CTL */
+ /* only 0 or all 1s can be written to IA32_MCi_CTL
+ * some Linux kernels though clear bit 10 in bank 4 to
+ * workaround a BIOS/GART TBL issue on AMD K8s, ignore
+ * this to avoid an uncatched #GP in the guest
+ */
if ((offset & 0x3) == 0 &&
- data != 0 && data != ~(u64)0)
+ data != 0 && (data | (1 << 10)) != ~(u64)0)
return -1;
vcpu->arch.mce_banks[offset] = data;
break;
int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
struct kvm_dirty_log *log)
{
- int r, n, i;
+ int r, i;
struct kvm_memory_slot *memslot;
+ unsigned long n;
unsigned long is_dirty = 0;
unsigned long *dirty_bitmap = NULL;
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
r = -ENOMEM;
dirty_bitmap = vmalloc(n);
kvm_set_cr8(vcpu, kvm_run->cr8);
if (vcpu->arch.pio.cur_count) {
+ vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
r = complete_pio(vcpu);
+ srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
if (r)
goto out;
}
int ret = 0;
u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
+ u32 desc_limit;
old_tss_base = kvm_mmu_gva_to_gpa_write(vcpu, old_tss_base, NULL);
}
}
- if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
+ desc_limit = get_desc_limit(&nseg_desc);
+ if (!nseg_desc.p ||
+ ((desc_limit < 0x67 && (nseg_desc.type & 8)) ||
+ desc_limit < 0x2b)) {
kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
return 1;
}
local_irq_save(flags);
if (lguest_data.hcall_status[next_call] != 0xFF) {
/* Table full, so do normal hcall which will flush table. */
- kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+ hcall(call, arg1, arg2, arg3, arg4);
} else {
lguest_data.hcalls[next_call].arg0 = call;
lguest_data.hcalls[next_call].arg1 = arg1;
* So, when we're in lazy mode, we call async_hcall() to store the call for
* future processing:
*/
-static void lazy_hcall1(unsigned long call,
- unsigned long arg1)
+static void lazy_hcall1(unsigned long call, unsigned long arg1)
{
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
- kvm_hypercall1(call, arg1);
+ hcall(call, arg1, 0, 0, 0);
else
async_hcall(call, arg1, 0, 0, 0);
}
/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
static void lazy_hcall2(unsigned long call,
- unsigned long arg1,
- unsigned long arg2)
+ unsigned long arg1,
+ unsigned long arg2)
{
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
- kvm_hypercall2(call, arg1, arg2);
+ hcall(call, arg1, arg2, 0, 0);
else
async_hcall(call, arg1, arg2, 0, 0);
}
static void lazy_hcall3(unsigned long call,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3)
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3)
{
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
- kvm_hypercall3(call, arg1, arg2, arg3);
+ hcall(call, arg1, arg2, arg3, 0);
else
async_hcall(call, arg1, arg2, arg3, 0);
}
#ifdef CONFIG_X86_PAE
static void lazy_hcall4(unsigned long call,
- unsigned long arg1,
- unsigned long arg2,
- unsigned long arg3,
- unsigned long arg4)
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4)
{
if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
- kvm_hypercall4(call, arg1, arg2, arg3, arg4);
+ hcall(call, arg1, arg2, arg3, arg4);
else
async_hcall(call, arg1, arg2, arg3, arg4);
}
:*/
static void lguest_leave_lazy_mmu_mode(void)
{
- kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+ hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0);
paravirt_leave_lazy_mmu();
}
static void lguest_end_context_switch(struct task_struct *next)
{
- kvm_hypercall0(LHCALL_FLUSH_ASYNC);
+ hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0);
paravirt_end_context_switch(next);
}
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
/* Tell Host about this new entry. */
- kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
+ hcall(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1], 0);
}
/*
struct desc_struct *idt = (void *)desc->address;
for (i = 0; i < (desc->size+1)/8; i++)
- kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b);
+ hcall(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b, 0);
}
/*
struct desc_struct *gdt = (void *)desc->address;
for (i = 0; i < (desc->size+1)/8; i++)
- kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
+ hcall(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b, 0);
}
/*
{
native_write_gdt_entry(dt, entrynum, desc, type);
/* Tell Host about this new entry. */
- kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
- dt[entrynum].a, dt[entrynum].b);
+ hcall(LHCALL_LOAD_GDT_ENTRY, entrynum,
+ dt[entrynum].a, dt[entrynum].b, 0);
}
/*
}
/* Please wake us this far in the future. */
- kvm_hypercall1(LHCALL_SET_CLOCKEVENT, delta);
+ hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0, 0);
return 0;
}
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* A 0 argument shuts the clock down. */
- kvm_hypercall0(LHCALL_SET_CLOCKEVENT);
+ hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* This is what we expect. */
/* STOP! Until an interrupt comes in. */
static void lguest_safe_halt(void)
{
- kvm_hypercall0(LHCALL_HALT);
+ hcall(LHCALL_HALT, 0, 0, 0, 0);
}
/*
*/
static void lguest_power_off(void)
{
- kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
- LGUEST_SHUTDOWN_POWEROFF);
+ hcall(LHCALL_SHUTDOWN, __pa("Power down"),
+ LGUEST_SHUTDOWN_POWEROFF, 0, 0);
}
/*
*/
static int lguest_panic(struct notifier_block *nb, unsigned long l, void *p)
{
- kvm_hypercall2(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF);
+ hcall(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF, 0, 0);
/* The hcall won't return, but to keep gcc happy, we're "done". */
return NOTIFY_DONE;
}
len = sizeof(scratch) - 1;
scratch[len] = '\0';
memcpy(scratch, buf, len);
- kvm_hypercall1(LHCALL_NOTIFY, __pa(scratch));
+ hcall(LHCALL_NOTIFY, __pa(scratch), 0, 0, 0);
/* This routine returns the number of bytes actually written. */
return len;
*/
static void lguest_restart(char *reason)
{
- kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
+ hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0, 0);
}
/*G:050
*/
movl $LHCALL_LGUEST_INIT, %eax
movl $lguest_data - __PAGE_OFFSET, %ebx
- .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+ int $LGUEST_TRAP_ENTRY
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
ENDPROC(call_rwsem_down_write_failed)
ENTRY(call_rwsem_wake)
- decw %dx /* do nothing if still outstanding active readers */
+ decl %edx /* do nothing if still outstanding active readers */
jnz 1f
save_common_regs
movq %rax,%rdi
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
-#include <linux/slab.h>
#include <linux/err.h>
#include <linux/sysctl.h>
#include <asm/mman.h>
+#include <linux/gfp.h>
#include <linux/initrd.h>
#include <linux/ioport.h>
#include <linux/swap.h>
void free_init_pages(char *what, unsigned long begin, unsigned long end)
{
- unsigned long addr = begin;
+ unsigned long addr;
+ unsigned long begin_aligned, end_aligned;
- if (addr >= end)
+ /* Make sure boundaries are page aligned */
+ begin_aligned = PAGE_ALIGN(begin);
+ end_aligned = end & PAGE_MASK;
+
+ if (WARN_ON(begin_aligned != begin || end_aligned != end)) {
+ begin = begin_aligned;
+ end = end_aligned;
+ }
+
+ if (begin >= end)
return;
+ addr = begin;
+
/*
* If debugging page accesses then do not free this memory but
* mark them not present - any buggy init-section access will
*/
#ifdef CONFIG_DEBUG_PAGEALLOC
printk(KERN_INFO "debug: unmapping init memory %08lx..%08lx\n",
- begin, PAGE_ALIGN(end));
+ begin, end);
set_memory_np(begin, (end - begin) >> PAGE_SHIFT);
#else
/*
for (; addr < end; addr += PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
- memset((void *)(addr & ~(PAGE_SIZE-1)),
- POISON_FREE_INITMEM, PAGE_SIZE);
+ memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
free_page(addr);
totalram_pages++;
}
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
- free_init_pages("initrd memory", start, end);
+ /*
+ * end could be not aligned, and We can not align that,
+ * decompresser could be confused by aligned initrd_end
+ * We already reserve the end partial page before in
+ * - i386_start_kernel()
+ * - x86_64_start_kernel()
+ * - relocate_initrd()
+ * So here We can do PAGE_ALIGN() safely to get partial page to be freed
+ */
+ free_init_pages("initrd memory", start, PAGE_ALIGN(end));
}
#endif
#include <linux/pfn.h>
#include <linux/poison.h>
#include <linux/bootmem.h>
-#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/memory_hotplug.h>
#include <linux/initrd.h>
#include <linux/cpumask.h>
+#include <linux/gfp.h>
#include <asm/asm.h>
#include <asm/bios_ebda.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
#include <linux/nmi.h>
+#include <linux/gfp.h>
#include <asm/processor.h>
#include <asm/bios_ebda.h>
static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata;
static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
+void __init fixup_early_ioremap(void)
+{
+ int i;
+
+ for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
+ if (prev_map[i]) {
+ WARN_ON(1);
+ break;
+ }
+ }
+
+ early_ioremap_init();
+}
+
static int __init check_early_ioremap_leak(void)
{
int count = 0;
#include <linux/kdebug.h>
#include <linux/mutex.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/version.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/pfn.h>
#include <linux/percpu.h>
+#include <linux/gfp.h>
#include <asm/e820.h>
#include <asm/processor.h>
#include <linux/debugfs.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include <linux/rbtree.h>
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/tlb.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/highmem.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <asm/e820.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
+#include <asm/io.h>
unsigned int __VMALLOC_RESERVE = 128 << 20;
address = memparse(arg, &arg);
reserve_top_address(address);
+ fixup_early_ioremap();
return 0;
}
early_param("reservetop", parse_reservetop);
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>
struct acpi_resource_address64 *addr)
{
acpi_status status;
-
- status = acpi_resource_to_address64(resource, addr);
- if (ACPI_SUCCESS(status) &&
- (addr->resource_type == ACPI_MEMORY_RANGE ||
- addr->resource_type == ACPI_IO_RANGE) &&
- addr->address_length > 0 &&
- addr->producer_consumer == ACPI_PRODUCER) {
+ struct acpi_resource_memory24 *memory24;
+ struct acpi_resource_memory32 *memory32;
+ struct acpi_resource_fixed_memory32 *fixed_memory32;
+
+ memset(addr, 0, sizeof(*addr));
+ switch (resource->type) {
+ case ACPI_RESOURCE_TYPE_MEMORY24:
+ memory24 = &resource->data.memory24;
+ addr->resource_type = ACPI_MEMORY_RANGE;
+ addr->minimum = memory24->minimum;
+ addr->address_length = memory24->address_length;
+ addr->maximum = addr->minimum + addr->address_length - 1;
+ return AE_OK;
+ case ACPI_RESOURCE_TYPE_MEMORY32:
+ memory32 = &resource->data.memory32;
+ addr->resource_type = ACPI_MEMORY_RANGE;
+ addr->minimum = memory32->minimum;
+ addr->address_length = memory32->address_length;
+ addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
+ case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
+ fixed_memory32 = &resource->data.fixed_memory32;
+ addr->resource_type = ACPI_MEMORY_RANGE;
+ addr->minimum = fixed_memory32->address;
+ addr->address_length = fixed_memory32->address_length;
+ addr->maximum = addr->minimum + addr->address_length - 1;
+ return AE_OK;
+ case ACPI_RESOURCE_TYPE_ADDRESS16:
+ case ACPI_RESOURCE_TYPE_ADDRESS32:
+ case ACPI_RESOURCE_TYPE_ADDRESS64:
+ status = acpi_resource_to_address64(resource, addr);
+ if (ACPI_SUCCESS(status) &&
+ (addr->resource_type == ACPI_MEMORY_RANGE ||
+ addr->resource_type == ACPI_IO_RANGE) &&
+ addr->address_length > 0) {
+ return AE_OK;
+ }
+ break;
}
return AE_ERROR;
}
return AE_OK;
}
-static void
-align_resource(struct acpi_device *bridge, struct resource *res)
-{
- int align = (res->flags & IORESOURCE_MEM) ? 16 : 4;
-
- /*
- * Host bridge windows are not BARs, but the decoders on the PCI side
- * that claim this address space have starting alignment and length
- * constraints, so fix any obvious BIOS goofs.
- */
- if (!IS_ALIGNED(res->start, align)) {
- dev_printk(KERN_DEBUG, &bridge->dev,
- "host bridge window %pR invalid; "
- "aligning start to %d-byte boundary\n", res, align);
- res->start &= ~(align - 1);
- }
- if (!IS_ALIGNED(res->end + 1, align)) {
- dev_printk(KERN_DEBUG, &bridge->dev,
- "host bridge window %pR invalid; "
- "aligning end to %d-byte boundary\n", res, align);
- res->end = ALIGN(res->end, align) - 1;
- }
-}
-
static acpi_status
setup_resource(struct acpi_resource *acpi_res, void *data)
{
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
- struct resource *root;
+ struct resource *root, *conflict;
u64 start, end;
status = resource_to_addr(acpi_res, &addr);
return AE_OK;
start = addr.minimum + addr.translation_offset;
- end = start + addr.address_length - 1;
+ end = addr.maximum + addr.translation_offset;
res = &info->res[info->res_num];
res->name = info->name;
res->start = start;
res->end = end;
res->child = NULL;
- align_resource(info->bridge, res);
if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
return AE_OK;
}
- if (insert_resource(root, res)) {
+ conflict = insert_resource_conflict(root, res);
+ if (conflict) {
dev_err(&info->bridge->dev,
- "can't allocate host bridge window %pR\n", res);
+ "address space collision: host bridge window %pR "
+ "conflicts with %s %pR\n",
+ res, conflict->name, conflict);
} else {
pci_bus_add_resource(info->bus, res, 0);
info->res_num++;
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <asm/acpi.h>
#include <asm/segment.h>
return start;
if (start & 0x300)
start = (start + 0x3ff) & ~0x3ff;
+ } else if (res->flags & IORESOURCE_MEM) {
+ if (start < BIOS_END)
+ start = BIOS_END;
}
return start;
}
continue;
if (!r->start ||
pci_claim_resource(dev, idx) < 0) {
- dev_info(&dev->dev,
- "can't reserve window %pR\n",
- r);
/*
* Something is wrong with the region.
* Invalidate the resource to prevent
"BAR %d: reserving %pr (d=%d, p=%d)\n",
idx, r, disabled, pass);
if (pci_claim_resource(dev, idx) < 0) {
- dev_info(&dev->dev,
- "can't reserve %pR\n", r);
/* We'll assign a new address later */
r->end -= r->start;
r->start = 0;
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmi.h>
#include <linux/io.h>
#include <linux/sfi_acpi.h>
#include <linux/bitmap.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
#include <asm/acpi.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <asm/pci_x86.h>
* Copyright (c) 2006 Rafael J. Wysocki <rjw@sisk.pl>
*/
+#include <linux/gfp.h>
#include <linux/suspend.h>
#include <linux/bootmem.h>
* Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
*/
+#include <linux/gfp.h>
#include <linux/smp.h>
#include <linux/suspend.h>
#include <asm/proto.h>
ret
ENTRY(restore_image)
+ movl mmu_cr4_features, %ecx
movl resume_pg_dir, %eax
subl $__PAGE_OFFSET, %eax
movl %eax, %cr3
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ andl $~(X86_CR4_PGE), %ecx
+ movl %ecx, %cr4; # turn off PGE
+ movl %cr3, %eax; # flush TLB
+ movl %eax, %cr3
+1:
movl restore_pblist, %edx
.p2align 4,,7
movl $swapper_pg_dir, %eax
subl $__PAGE_OFFSET, %eax
movl %eax, %cr3
- /* Flush TLB, including "global" things (vmalloc) */
movl mmu_cr4_features, %ecx
jecxz 1f # cr4 Pentium and higher, skip if zero
- movl %ecx, %edx
- andl $~(X86_CR4_PGE), %edx
- movl %edx, %cr4; # turn off PGE
-1:
- movl %cr3, %eax; # flush TLB
- movl %eax, %cr3
- jecxz 1f # cr4 Pentium and higher, skip if zero
movl %ecx, %cr4; # turn PGE back on
1:
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/random.h>
#include <linux/elf.h>
#include <linux/init.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include "debugfs.h"
#include <linux/highmem.h>
#include <linux/console.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <xen/xen.h>
#include <xen/interface/xen.h>
#include <linux/debugfs.h>
#include <linux/bug.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
*/
#include <linux/sched.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/smp.h>
#include <asm/paravirt.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
#include <linux/log2.h>
+#include <linux/gfp.h>
#include <asm/paravirt.h>
#include <linux/clockchips.h>
#include <linux/kernel_stat.h>
#include <linux/math64.h>
+#include <linux/gfp.h>
#include <asm/pvclock.h>
#include <asm/xen/hypervisor.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/elf.h>
#include <linux/init.h>
#include <linux/prctl.h>
#include <linux/module.h>
#include <linux/mqueue.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
+#include <linux/gfp.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <asm/bootparam.h>
#include <asm/page.h>
#include <linux/sched.h>
#include <linux/console.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/major.h>
#include <linux/param.h>
Protection. If in doubt, say N.
config BLK_CGROUP
- tristate
+ tristate "Block cgroup support"
depends on CGROUPS
+ depends on CFQ_GROUP_IOSCHED
default n
---help---
Generic block IO controller cgroup interface. This is the common
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include <linux/gfp.h>
#include "blk.h"
#include <linux/kdev_t.h>
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "blk-cgroup.h"
static DEFINE_SPINLOCK(blkio_list_lock);
static struct cgroup_subsys_state *
blkiocg_create(struct cgroup_subsys *subsys, struct cgroup *cgroup)
{
- struct blkio_cgroup *blkcg, *parent_blkcg;
+ struct blkio_cgroup *blkcg;
+ struct cgroup *parent = cgroup->parent;
- if (!cgroup->parent) {
+ if (!parent) {
blkcg = &blkio_root_cgroup;
goto done;
}
/* Currently we do not support hierarchy deeper than two level (0,1) */
- parent_blkcg = cgroup_to_blkio_cgroup(cgroup->parent);
- if (css_depth(&parent_blkcg->css) > 0)
+ if (parent != cgroup->top_cgroup)
return ERR_PTR(-EINVAL);
blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL);
#include <linux/mempool.h>
#include <linux/bio.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include "blk.h"
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/bootmem.h> /* for max_pfn/max_low_pfn */
+#include <linux/slab.h>
#include "blk.h"
#include <linux/blkdev.h>
#include <linux/bootmem.h> /* for max_pfn/max_low_pfn */
#include <linux/gcd.h>
+#include <linux/lcm.h>
#include <linux/jiffies.h>
+#include <linux/gfp.h>
#include "blk.h"
}
EXPORT_SYMBOL(blk_queue_stack_limits);
-static unsigned int lcm(unsigned int a, unsigned int b)
-{
- if (a && b)
- return (a * b) / gcd(a, b);
- else if (b)
- return b;
-
- return a;
-}
-
/**
* blk_stack_limits - adjust queue_limits for stacked devices
* @t: the stacking driver limits (top device)
* Functions related to sysfs handling
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
return queue_var_show(max_sectors_kb, (page));
}
+static ssize_t queue_max_segments_show(struct request_queue *q, char *page)
+{
+ return queue_var_show(queue_max_segments(q), (page));
+}
+
+static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
+{
+ if (test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+ return queue_var_show(queue_max_segment_size(q), (page));
+
+ return queue_var_show(PAGE_CACHE_SIZE, (page));
+}
+
static ssize_t queue_logical_block_size_show(struct request_queue *q, char *page)
{
return queue_var_show(queue_logical_block_size(q), page);
.show = queue_max_hw_sectors_show,
};
+static struct queue_sysfs_entry queue_max_segments_entry = {
+ .attr = {.name = "max_segments", .mode = S_IRUGO },
+ .show = queue_max_segments_show,
+};
+
+static struct queue_sysfs_entry queue_max_segment_size_entry = {
+ .attr = {.name = "max_segment_size", .mode = S_IRUGO },
+ .show = queue_max_segment_size_show,
+};
+
static struct queue_sysfs_entry queue_iosched_entry = {
.attr = {.name = "scheduler", .mode = S_IRUGO | S_IWUSR },
.show = elv_iosched_show,
&queue_ra_entry.attr,
&queue_max_hw_sectors_entry.attr,
&queue_max_sectors_entry.attr,
+ &queue_max_segments_entry.attr,
+ &queue_max_segment_size_entry.attr,
&queue_iosched_entry.attr,
&queue_hw_sector_size_entry.attr,
&queue_logical_block_size_entry.attr,
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include <linux/slab.h>
#include "blk.h"
struct request_queue *q = (struct request_queue *) data;
unsigned long flags, next = 0;
struct request *rq, *tmp;
+ int next_set = 0;
spin_lock_irqsave(q->queue_lock, flags);
if (blk_mark_rq_complete(rq))
continue;
blk_rq_timed_out(rq);
- } else if (!next || time_after(next, rq->deadline))
+ } else if (!next_set || time_after(next, rq->deadline)) {
next = rq->deadline;
+ next_set = 1;
+ }
}
- /*
- * next can never be 0 here with the list non-empty, since we always
- * bump ->deadline to 1 so we can detect if the timer was ever added
- * or not. See comment in blk_add_timer()
- */
- if (next)
+ if (next_set)
mod_timer(&q->timeout, round_jiffies_up(next));
spin_unlock_irqrestore(q->queue_lock, flags);
#include <linux/idr.h>
#include <linux/bsg.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_ioctl.h>
* Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/elevator.h>
#include <linux/jiffies.h>
#define CFQ_SERVICE_SHIFT 12
#define CFQQ_SEEK_THR (sector_t)(8 * 100)
+#define CFQQ_CLOSE_THR (sector_t)(8 * 1024)
#define CFQQ_SECT_THR_NONROT (sector_t)(2 * 32)
#define CFQQ_SEEKY(cfqq) (hweight32(cfqq->seek_history) > 32/8)
unsigned int major, minor;
cfqg = cfqg_of_blkg(blkiocg_lookup_group(blkcg, key));
+ if (cfqg && !cfqg->blkg.dev && bdi->dev && dev_name(bdi->dev)) {
+ sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
+ cfqg->blkg.dev = MKDEV(major, minor);
+ goto done;
+ }
if (cfqg || !create)
goto done;
struct cfq_queue *cfqq)
{
if (cfqq) {
- cfq_log_cfqq(cfqd, cfqq, "set_active");
+ cfq_log_cfqq(cfqd, cfqq, "set_active wl_prio:%d wl_type:%d",
+ cfqd->serving_prio, cfqd->serving_type);
cfqq->slice_start = 0;
cfqq->dispatch_start = jiffies;
cfqq->allocated_slice = 0;
}
static inline int cfq_rq_close(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- struct request *rq, bool for_preempt)
+ struct request *rq)
{
- return cfq_dist_from_last(cfqd, rq) <= CFQQ_SEEK_THR;
+ return cfq_dist_from_last(cfqd, rq) <= CFQQ_CLOSE_THR;
}
static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
* will contain the closest sector.
*/
__cfqq = rb_entry(parent, struct cfq_queue, p_node);
- if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false))
+ if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
return __cfqq;
if (blk_rq_pos(__cfqq->next_rq) < sector)
return NULL;
__cfqq = rb_entry(node, struct cfq_queue, p_node);
- if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq, false))
+ if (cfq_rq_close(cfqd, cur_cfqq, __cfqq->next_rq))
return __cfqq;
return NULL;
{
struct cfq_queue *cfqq;
+ if (cfq_class_idle(cur_cfqq))
+ return NULL;
if (!cfq_cfqq_sync(cur_cfqq))
return NULL;
if (CFQQ_SEEKY(cur_cfqq))
* Otherwise, we do only if they are the last ones
* in their service tree.
*/
- return service_tree->count == 1 && cfq_cfqq_sync(cfqq);
+ if (service_tree->count == 1 && cfq_cfqq_sync(cfqq))
+ return 1;
+ cfq_log_cfqq(cfqd, cfqq, "Not idling. st->count:%d",
+ service_tree->count);
+ return 0;
}
static void cfq_arm_slice_timer(struct cfq_data *cfqd)
* time slice.
*/
if (sample_valid(cic->ttime_samples) &&
- (cfqq->slice_end - jiffies < cic->ttime_mean))
+ (cfqq->slice_end - jiffies < cic->ttime_mean)) {
+ cfq_log_cfqq(cfqd, cfqq, "Not idling. think_time:%d",
+ cic->ttime_mean);
return;
+ }
cfq_mark_cfqq_wait_request(cfqq);
slice = max(slice, 2 * cfqd->cfq_slice_idle);
slice = max_t(unsigned, slice, CFQ_MIN_TT);
+ cfq_log(cfqd, "workload slice:%d", slice);
cfqd->workload_expires = jiffies + slice;
cfqd->noidle_tree_requires_idle = false;
}
struct cfq_queue *cfqq;
int dispatched = 0;
- while ((cfqq = cfq_get_next_queue_forced(cfqd)) != NULL)
+ /* Expire the timeslice of the current active queue first */
+ cfq_slice_expired(cfqd, 0);
+ while ((cfqq = cfq_get_next_queue_forced(cfqd)) != NULL) {
+ __cfq_set_active_queue(cfqd, cfqq);
dispatched += __cfq_forced_dispatch_cfqq(cfqq);
+ }
- cfq_slice_expired(cfqd, 0);
BUG_ON(cfqd->busy_queues);
cfq_log(cfqd, "forced_dispatch=%d", dispatched);
* if this request is as-good as one we would expect from the
* current cfqq, let it preempt
*/
- if (cfq_rq_close(cfqd, cfqq, rq, true))
+ if (cfq_rq_close(cfqd, cfqq, rq))
return true;
return false;
if (cfq_should_wait_busy(cfqd, cfqq)) {
cfqq->slice_end = jiffies + cfqd->cfq_slice_idle;
cfq_mark_cfqq_wait_busy(cfqq);
+ cfq_log_cfqq(cfqd, cfqq, "will busy wait");
}
/*
* to make sure that cfq_put_cfqg() does not try to kfree root group
*/
atomic_set(&cfqg->ref, 1);
+ rcu_read_lock();
blkiocg_add_blkio_group(&blkio_root_cgroup, &cfqg->blkg, (void *)cfqd,
0);
+ rcu_read_unlock();
#endif
/*
* Not strictly needed (since RB_ROOT just clears the node and we
#include <linux/elevator.h>
#include <linux/fd.h>
#include <linux/hdreg.h>
+#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/smp_lock.h>
#include <linux/types.h>
spin_unlock(&elv_list_lock);
- sprintf(elv, "%s-iosched", name);
+ snprintf(elv, sizeof(elv), "%s-iosched", name);
request_module("%s", elv);
spin_lock(&elv_list_lock);
#include <linux/capability.h>
#include <linux/blkdev.h>
+#include <linux/gfp.h>
#include <linux/blkpg.h>
#include <linux/hdreg.h>
#include <linux/backing-dev.h>
#include <linux/elevator.h>
#include <linux/bio.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
struct noop_data {
#include <linux/list.h>
#include <linux/module.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include "internal.h"
#include <linux/notifier.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include "internal.h"
#include <linux/dma-mapping.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
+#include <linux/gfp.h>
/**
* pq_scribble_page - space to hold throwaway P or Q buffer for
async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
struct page **blocks, struct async_submit_ctl *submit)
{
+ void *scribble = submit->scribble;
int non_zero_srcs, i;
BUG_ON(faila == failb);
pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
- /* we need to preserve the contents of 'blocks' for the async
- * case, so punt to synchronous if a scribble buffer is not available
+ /* if a dma resource is not available or a scribble buffer is not
+ * available punt to the synchronous path. In the 'dma not
+ * available' case be sure to use the scribble buffer to
+ * preserve the content of 'blocks' as the caller intended.
*/
- if (!submit->scribble) {
- void **ptrs = (void **) blocks;
+ if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+ void **ptrs = scribble ? scribble : (void **) blocks;
async_tx_quiesce(&submit->depend_tx);
for (i = 0; i < disks; i++)
pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
- /* we need to preserve the contents of 'blocks' for the async
- * case, so punt to synchronous if a scribble buffer is not available
+ /* if a dma resource is not available or a scribble buffer is not
+ * available punt to the synchronous path. In the 'dma not
+ * available' case be sure to use the scribble buffer to
+ * preserve the content of 'blocks' as the caller intended.
*/
- if (!scribble) {
- void **ptrs = (void **) blocks;
+ if (!async_dma_find_channel(DMA_PQ) || !scribble) {
+ void **ptrs = scribble ? scribble : (void **) blocks;
async_tx_quiesce(&submit->depend_tx);
for (i = 0; i < disks; i++)
*
*/
#include <linux/async_tx.h>
+#include <linux/gfp.h>
#include <linux/random.h>
#undef pr
char tail[];
};
+static void authenc_request_complete(struct aead_request *req, int err)
+{
+ if (err != -EINPROGRESS)
+ aead_request_complete(req, err);
+}
+
static int crypto_authenc_setkey(struct crypto_aead *authenc, const u8 *key,
unsigned int keylen)
{
crypto_aead_authsize(authenc), 1);
out:
- aead_request_complete(req, err);
+ authenc_request_complete(req, err);
}
static void authenc_geniv_ahash_done(struct crypto_async_request *areq, int err)
err = crypto_ablkcipher_decrypt(abreq);
out:
- aead_request_complete(req, err);
+ authenc_request_complete(req, err);
}
static void authenc_verify_ahash_done(struct crypto_async_request *areq,
err = crypto_ablkcipher_decrypt(abreq);
out:
- aead_request_complete(req, err);
+ authenc_request_complete(req, err);
}
static u8 *crypto_authenc_ahash_fb(struct aead_request *req, unsigned int flags)
err = crypto_authenc_genicv(areq, iv, 0);
}
- aead_request_complete(areq, err);
+ authenc_request_complete(areq, err);
}
static int crypto_authenc_encrypt(struct aead_request *req)
err = crypto_authenc_genicv(areq, greq->giv, 0);
}
- aead_request_complete(areq, err);
+ authenc_request_complete(areq, err);
}
static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/scatterlist.h>
-#include <linux/slab.h>
#include <linux/string.h>
struct hmac_ctx {
#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/string.h>
static DEFINE_MUTEX(crypto_default_rng_lock);
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <crypto/hash.h>
#include <linux/err.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/string.h>
#include <linux/moduleparam.h>
#define BH_TRACE 0
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/raid/xor.h>
#include <linux/jiffies.h>
#include <asm/xor.h>
obj-$(CONFIG_PNP) += pnp/
obj-$(CONFIG_ARM_AMBA) += amba/
+obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_XEN) += xen/
# regulators early, since some subsystems rely on them to initialize
obj-$(CONFIG_OF) += of/
obj-$(CONFIG_SSB) += ssb/
obj-$(CONFIG_VHOST_NET) += vhost/
-obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_VLYNQ) += vlynq/
obj-$(CONFIG_STAGING) += staging/
obj-y += platform/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/init.h>
#include <linux/types.h>
#include <linux/memory_hotplug.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#define ACPI_MEMORY_DEVICE_CLASS "memory"
#include <linux/freezer.h>
#include <linux/cpu.h>
#include <linux/clockchips.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_PROCESSOR_AGGREGATOR_CLASS "processor_aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_CLASS "acpi_pad"
#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
static DEFINE_MUTEX(isolated_cpus_lock);
if (ACPI_FAILURE(status))
return_ACPI_STATUS(status);
- /* Mark wake-enabled or HW enable, or both */
-
- if (gpe_event_info->runtime_count) {
- /* Clear the GPE (of stale events), then enable it */
- status = acpi_hw_clear_gpe(gpe_event_info);
- if (ACPI_FAILURE(status))
- return_ACPI_STATUS(status);
-
- /* Enable the requested runtime GPE */
- status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
- }
+ /* Clear the GPE (of stale events), then enable it */
+ status = acpi_hw_clear_gpe(gpe_event_info);
+ if (ACPI_FAILURE(status))
+ return_ACPI_STATUS(status);
- return_ACPI_STATUS(AE_OK);
+ /* Enable the requested GPE */
+ status = acpi_hw_write_gpe_enable_reg(gpe_event_info);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
acpi_ut_add_reference(obj_desc->field.region_obj);
+ /* allow full data read from EC address space */
+ if (obj_desc->field.region_obj->region.space_id ==
+ ACPI_ADR_SPACE_EC) {
+ if (obj_desc->common_field.bit_length > 8) {
+ unsigned width =
+ ACPI_ROUND_BITS_UP_TO_BYTES(
+ obj_desc->common_field.bit_length);
+ // access_bit_width is u8, don't overflow it
+ if (width > 8)
+ width = 8;
+ obj_desc->common_field.access_byte_width =
+ width;
+ obj_desc->common_field.access_bit_width =
+ 8 * width;
+ }
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_BFIELD,
"RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
obj_desc->field.start_field_bit_offset,
#include <linux/jiffies.h>
#include <linux/async.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#ifdef CONFIG_ACPI_PROCFS_POWER
#include <linux/proc_fs.h>
result = acpi_battery_get_status(battery);
if (result)
return result;
-#ifdef CONFIG_ACPI_SYSFS_POWER
if (!acpi_battery_present(battery)) {
+#ifdef CONFIG_ACPI_SYSFS_POWER
sysfs_remove_battery(battery);
+#endif
battery->update_time = 0;
return 0;
}
-#endif
if (!battery->update_time ||
old_present != acpi_battery_present(battery)) {
result = acpi_battery_get_info(battery);
#ifdef CONFIG_ACPI_SYSFS_POWER
/* acpi_battery_update could remove power_supply object */
if (battery->bat.dev)
- kobject_uevent(&battery->bat.dev->kobj, KOBJ_CHANGE);
+ power_supply_changed(&battery->bat);
#endif
}
#include <linux/device.h>
#include <linux/proc_fs.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#ifdef CONFIG_X86
#include <asm/mpspec.h>
#endif
if (!event_is_open)
return 0;
- event = kmalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
+ event = kzalloc(sizeof(struct acpi_bus_event), GFP_ATOMIC);
if (!event)
return -ENOMEM;
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/acpi.h>
#include <acpi/acpi_bus.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <acpi/acpi_drivers.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/notifier.h>
static acpi_status
find_dock(acpi_handle handle, u32 lvl, void *context, void **rv)
{
- acpi_status status = AE_OK;
-
if (is_dock(handle))
- if (dock_add(handle) >= 0)
- status = AE_CTRL_TERMINATE;
+ dock_add(handle);
- return status;
+ return AE_OK;
}
static acpi_status
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
static acpi_status
acpi_ec_space_handler(u32 function, acpi_physical_address address,
- u32 bits, u64 *value,
+ u32 bits, u64 *value64,
void *handler_context, void *region_context)
{
struct acpi_ec *ec = handler_context;
- int result = 0, i;
- u8 temp = 0;
+ int result = 0, i, bytes = bits / 8;
+ u8 *value = (u8 *)value64;
if ((address > 0xFF) || !value || !handler_context)
return AE_BAD_PARAMETER;
if (function != ACPI_READ && function != ACPI_WRITE)
return AE_BAD_PARAMETER;
- if (bits != 8 && acpi_strict)
- return AE_BAD_PARAMETER;
-
- if (EC_FLAGS_MSI)
+ if (EC_FLAGS_MSI || bits > 8)
acpi_ec_burst_enable(ec);
- if (function == ACPI_READ) {
- result = acpi_ec_read(ec, address, &temp);
- *value = temp;
- } else {
- temp = 0xff & (*value);
- result = acpi_ec_write(ec, address, temp);
- }
-
- for (i = 8; unlikely(bits - i > 0); i += 8) {
- ++address;
- if (function == ACPI_READ) {
- result = acpi_ec_read(ec, address, &temp);
- (*value) |= ((u64)temp) << i;
- } else {
- temp = 0xff & ((*value) >> i);
- result = acpi_ec_write(ec, address, temp);
- }
- }
+ for (i = 0; i < bytes; ++i, ++address, ++value)
+ result = (function == ACPI_READ) ?
+ acpi_ec_read(ec, address, value) :
+ acpi_ec_write(ec, address, *value);
- if (EC_FLAGS_MSI)
+ if (EC_FLAGS_MSI || bits > 8)
acpi_ec_burst_disable(ec);
switch (result) {
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/poll.h>
+#include <linux/gfp.h>
#include <acpi/acpi_drivers.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/rwsem.h>
#include <linux/acpi.h>
{
acpi_status status = AE_NOT_FOUND;
struct acpi_table_header *hest = NULL;
+
+ if (acpi_disabled)
+ return 0;
+
status = acpi_get_table(ACPI_SIG_HEST, 1, &hest);
if (ACPI_SUCCESS(status)) {
void __acpi_map_pxm_to_node(int pxm, int node)
{
- pxm_to_node_map[pxm] = node;
- node_to_pxm_map[node] = pxm;
+ if (pxm_to_node_map[pxm] == NUMA_NO_NODE || node < pxm_to_node_map[pxm])
+ pxm_to_node_map[pxm] = node;
+ if (node_to_pxm_map[node] == PXM_INVAL || pxm < node_to_pxm_map[node])
+ node_to_pxm_map[node] = pxm;
}
int acpi_map_pxm_to_node(int pxm)
queue = hp ? kacpi_hotplug_wq :
(type == OSL_NOTIFY_HANDLER ? kacpi_notify_wq : kacpid_wq);
dpc->wait = hp ? 1 : 0;
- INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+
+ if (queue == kacpi_hotplug_wq)
+ INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+ else if (queue == kacpi_notify_wq)
+ INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+ else
+ INIT_WORK(&dpc->work, acpi_os_execute_deferred);
+
ret = queue_work(queue, &dpc->work);
if (!ret) {
if (clash) {
if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) {
- printk("%sACPI: %s resource %s [0x%llx-0x%llx]"
- " conflicts with ACPI region %s"
- " [0x%llx-0x%llx]\n",
- acpi_enforce_resources == ENFORCE_RESOURCES_LAX
- ? KERN_WARNING : KERN_ERR,
- ioport ? "I/O" : "Memory", res->name,
- (long long) res->start, (long long) res->end,
- res_list_elem->name,
- (long long) res_list_elem->start,
- (long long) res_list_elem->end);
+ printk(KERN_WARNING "ACPI: resource %s %pR"
+ " conflicts with ACPI region %s %pR\n",
+ res->name, res, res_list_elem->name,
+ res_list_elem);
if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
printk(KERN_NOTICE "ACPI: This conflict may"
" cause random problems and system"
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/pci.h>
#include <linux/pci-acpi.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <acpi/acpi_bus.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <linux/kdev_t.h>
#include <linux/sched.h>
#include <linux/time.h>
#define ACPI_POWER_METER_NAME "power_meter"
ACPI_MODULE_NAME(ACPI_POWER_METER_NAME);
#define ACPI_POWER_METER_DEVICE_NAME "Power Meter"
-#define ACPI_POWER_METER_CLASS "power_meter_resource"
+#define ACPI_POWER_METER_CLASS "pwr_meter_resource"
#define NUM_SENSORS 17
* - Added _PDC for platforms with Intel CPUs
*/
#include <linux/dmi.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#include <acpi/processor.h>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/cpuidle.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#ifdef CONFIG_X86
#include <asm/cpufeature.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include "sbshc.h"
#define PREFIX "ACPI: "
-#define ACPI_SMB_HC_CLASS "smbus_host_controller"
+#define ACPI_SMB_HC_CLASS "smbus_host_ctl"
#define ACPI_SMB_HC_DEVICE_NAME "ACPI SMBus HC"
struct acpi_smb_hc {
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/acpi.h>
#include <linux/signal.h>
#include <linux/kthread.h>
+#include <linux/dmi.h>
#include <acpi/acpi_drivers.h>
list_add_tail(&id->list, &device->pnp.ids);
}
+/*
+ * Old IBM workstations have a DSDT bug wherein the SMBus object
+ * lacks the SMBUS01 HID and the methods do not have the necessary "_"
+ * prefix. Work around this.
+ */
+static int acpi_ibm_smbus_match(struct acpi_device *device)
+{
+ acpi_handle h_dummy;
+ struct acpi_buffer path = {ACPI_ALLOCATE_BUFFER, NULL};
+ int result;
+
+ if (!dmi_name_in_vendors("IBM"))
+ return -ENODEV;
+
+ /* Look for SMBS object */
+ result = acpi_get_name(device->handle, ACPI_SINGLE_NAME, &path);
+ if (result)
+ return result;
+
+ if (strcmp("SMBS", path.pointer)) {
+ result = -ENODEV;
+ goto out;
+ }
+
+ /* Does it have the necessary (but misnamed) methods? */
+ result = -ENODEV;
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "SBI", &h_dummy)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "SBR", &h_dummy)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "SBW", &h_dummy)))
+ result = 0;
+out:
+ kfree(path.pointer);
+ return result;
+}
+
static void acpi_device_set_id(struct acpi_device *device)
{
acpi_status status;
if (ACPI_IS_ROOT_DEVICE(device)) {
acpi_add_id(device, ACPI_SYSTEM_HID);
break;
- } else if (ACPI_IS_ROOT_DEVICE(device->parent)) {
- /* \_SB_, the only root-level namespace device */
- acpi_add_id(device, ACPI_BUS_HID);
- strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
- strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
- break;
}
status = acpi_get_object_info(device->handle, &info);
acpi_add_id(device, ACPI_BAY_HID);
else if (ACPI_SUCCESS(acpi_dock_match(device)))
acpi_add_id(device, ACPI_DOCK_HID);
+ else if (!acpi_ibm_smbus_match(device))
+ acpi_add_id(device, ACPI_SMBUS_IBM_HID);
+ else if (!acpi_device_hid(device) &&
+ ACPI_IS_ROOT_DEVICE(device->parent)) {
+ acpi_add_id(device, ACPI_BUS_HID); /* \_SB, LNXSYBUS */
+ strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
+ strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
+ }
break;
case ACPI_BUS_TYPE_POWER:
},
},
{
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad T410",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad T510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad W510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad X201",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad X201",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad T410",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad T510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad W510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad X201",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad X201",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad T410",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad T510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad W510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad X201",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Lenovo ThinkPad X201",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"),
+ },
+ },
+ {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Dell Studio 1558",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1558"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Dell Studio 1557",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Dell Studio 1555",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1555"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/string.h>
#include <asm/uaccess.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <acpi/acpi_bus.h>
#include <linux/sort.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/dmi.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <linux/suspend.h>
#define PREFIX "ACPI: "
static int register_count = 0;
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
-static int acpi_video_resume(struct acpi_device *device);
static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id video_device_ids[] = {
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
- .resume = acpi_video_resume,
.notify = acpi_video_bus_notify,
},
};
struct proc_dir_entry *dir;
struct input_dev *input;
char phys[32]; /* for input device */
+ struct notifier_block pm_nb;
};
struct acpi_video_device_flags {
if (IS_ERR(device->backlight))
return;
+ /*
+ * Save current brightness level in case we have to restore it
+ * before acpi_video_device_lcd_set_level() is called next time.
+ */
+ device->backlight->props.brightness =
+ acpi_video_get_brightness(device->backlight);
+
result = sysfs_create_link(&device->backlight->dev.kobj,
&device->dev->dev.kobj, "device");
if (result)
{
struct acpi_video_bus *video = acpi_driver_data(device);
struct input_dev *input;
- int keycode;
+ int keycode = 0;
if (!video)
return;
break;
default:
- keycode = KEY_UNKNOWN;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
acpi_notifier_call_chain(device, event, 0);
- input_report_key(input, keycode, 1);
- input_sync(input);
- input_report_key(input, keycode, 0);
- input_sync(input);
+
+ if (keycode) {
+ input_report_key(input, keycode, 1);
+ input_sync(input);
+ input_report_key(input, keycode, 0);
+ input_sync(input);
+ }
return;
}
struct acpi_device *device = NULL;
struct acpi_video_bus *bus;
struct input_dev *input;
- int keycode;
+ int keycode = 0;
if (!video_device)
return;
keycode = KEY_DISPLAY_OFF;
break;
default:
- keycode = KEY_UNKNOWN;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
acpi_notifier_call_chain(device, event, 0);
- input_report_key(input, keycode, 1);
- input_sync(input);
- input_report_key(input, keycode, 0);
- input_sync(input);
+
+ if (keycode) {
+ input_report_key(input, keycode, 1);
+ input_sync(input);
+ input_report_key(input, keycode, 0);
+ input_sync(input);
+ }
return;
}
-static int instance;
-static int acpi_video_resume(struct acpi_device *device)
+static int acpi_video_resume(struct notifier_block *nb,
+ unsigned long val, void *ign)
{
struct acpi_video_bus *video;
struct acpi_video_device *video_device;
int i;
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
+ switch (val) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ case PM_RESTORE_PREPARE:
+ return NOTIFY_DONE;
+ }
- video = acpi_driver_data(device);
+ video = container_of(nb, struct acpi_video_bus, pm_nb);
+
+ dev_info(&video->device->dev, "Restoring backlight state\n");
for (i = 0; i < video->attached_count; i++) {
video_device = video->attached_array[i].bind_info;
if (video_device && video_device->backlight)
acpi_video_set_brightness(video_device->backlight);
}
- return AE_OK;
+
+ return NOTIFY_OK;
}
static acpi_status
return AE_OK;
}
+static int instance;
+
static int acpi_video_bus_add(struct acpi_device *device)
{
struct acpi_video_bus *video;
set_bit(KEY_BRIGHTNESSDOWN, input->keybit);
set_bit(KEY_BRIGHTNESS_ZERO, input->keybit);
set_bit(KEY_DISPLAY_OFF, input->keybit);
- set_bit(KEY_UNKNOWN, input->keybit);
error = input_register_device(input);
if (error)
video->flags.rom ? "yes" : "no",
video->flags.post ? "yes" : "no");
+ video->pm_nb.notifier_call = acpi_video_resume;
+ video->pm_nb.priority = 0;
+ register_pm_notifier(&video->pm_nb);
+
return 0;
err_free_input_dev:
video = acpi_driver_data(device);
+ unregister_pm_notifier(&video->pm_nb);
+
acpi_video_bus_stop_devices(video);
acpi_video_bus_put_devices(video);
acpi_video_bus_remove_fs(device);
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/dmi.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
#include <linux/libata.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <scsi/scsi_device.h>
#include "libata.h"
#include <linux/io.h>
#include <linux/async.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
{
struct ata_eh_context *ehc = &dev->link->eh_context;
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+ bool unlock_hpa = ata_ignore_hpa || dev->flags & ATA_DFLAG_UNLOCK_HPA;
u64 sectors = ata_id_n_sectors(dev->id);
u64 native_sectors;
int rc;
/* If device aborted the command or HPA isn't going to
* be unlocked, skip HPA resizing.
*/
- if (rc == -EACCES || !ata_ignore_hpa) {
+ if (rc == -EACCES || !unlock_hpa) {
ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
"broken, skipping HPA handling\n");
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
dev->n_native_sectors = native_sectors;
/* nothing to do? */
- if (native_sectors <= sectors || !ata_ignore_hpa) {
+ if (native_sectors <= sectors || !unlock_hpa) {
if (!print_info || native_sectors == sectors)
return 0;
goto fail;
/* verify n_sectors hasn't changed */
- if (dev->class == ATA_DEV_ATA && n_sectors &&
- dev->n_sectors != n_sectors) {
- ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
- "%llu != %llu\n",
- (unsigned long long)n_sectors,
- (unsigned long long)dev->n_sectors);
- /*
- * Something could have caused HPA to be unlocked
- * involuntarily. If n_native_sectors hasn't changed
- * and the new size matches it, keep the device.
- */
- if (dev->n_native_sectors == n_native_sectors &&
- dev->n_sectors > n_sectors &&
- dev->n_sectors == n_native_sectors) {
- ata_dev_printk(dev, KERN_WARNING,
- "new n_sectors matches native, probably "
- "late HPA unlock, continuing\n");
- /* keep using the old n_sectors */
- dev->n_sectors = n_sectors;
- } else {
- /* restore original n_[native]_sectors and fail */
- dev->n_native_sectors = n_native_sectors;
- dev->n_sectors = n_sectors;
- rc = -ENODEV;
- goto fail;
- }
+ if (dev->class != ATA_DEV_ATA || !n_sectors ||
+ dev->n_sectors == n_sectors)
+ return 0;
+
+ /* n_sectors has changed */
+ ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch %llu != %llu\n",
+ (unsigned long long)n_sectors,
+ (unsigned long long)dev->n_sectors);
+
+ /*
+ * Something could have caused HPA to be unlocked
+ * involuntarily. If n_native_sectors hasn't changed and the
+ * new size matches it, keep the device.
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "new n_sectors matches native, probably "
+ "late HPA unlock, continuing\n");
+ /* keep using the old n_sectors */
+ dev->n_sectors = n_sectors;
+ return 0;
}
- return 0;
+ /*
+ * Some BIOSes boot w/o HPA but resume w/ HPA locked. Try
+ * unlocking HPA in those cases.
+ *
+ * https://bugzilla.kernel.org/show_bug.cgi?id=15396
+ */
+ if (dev->n_native_sectors == n_native_sectors &&
+ dev->n_sectors < n_sectors && n_sectors == n_native_sectors &&
+ !(dev->horkage & ATA_HORKAGE_BROKEN_HPA)) {
+ ata_dev_printk(dev, KERN_WARNING,
+ "old n_sectors matches native, probably "
+ "late HPA lock, will try to unlock HPA\n");
+ /* try unlocking HPA */
+ dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+ rc = -EIO;
+ } else
+ rc = -ENODEV;
+ /* restore original n_[native_]sectors and fail */
+ dev->n_native_sectors = n_native_sectors;
+ dev->n_sectors = n_sectors;
fail:
ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);
return rc;
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=15573 */
+ { "C300-CTFDDAC128MAG", "0001", ATA_HORKAGE_NONCQ, },
+
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ struct request_queue *q = qc->scsicmd->device->request_queue;
+ unsigned long flags;
WARN_ON(!ap->ops->error_handler);
* Note that ATA_QCFLAG_FAILED is unconditionally set after
* this function completes.
*/
+ spin_lock_irqsave(q->queue_lock, flags);
blk_abort_request(qc->scsicmd->request);
+ spin_unlock_irqrestore(q->queue_lock, flags);
}
/**
}
/* okay, this error is ours */
+ memset(&tf, 0, sizeof(tf));
rc = ata_eh_read_log_10h(dev, &tag, &tf);
if (rc) {
ata_link_printk(link, KERN_ERR, "failed to read log page 10h "
#include <linux/kernel.h>
#include <linux/libata.h>
+#include <linux/slab.h>
#include "libata.h"
const struct ata_port_operations sata_pmp_port_ops = {
*
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/spinlock.h>
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/libata.h>
#include <linux/highmem.h>
{
struct ata_eh_info *ehi = &ap->link.eh_info;
u8 status, host_stat = 0;
+ bool bmdma_stopped = false;
VPRINTK("ata%u: protocol %d task_state %d\n",
ap->print_id, qc->tf.protocol, ap->hsm_task_state);
/* before we do anything else, clear DMA-Start bit */
ap->ops->bmdma_stop(qc);
+ bmdma_stopped = true;
if (unlikely(host_stat & ATA_DMA_ERR)) {
/* error when transfering data to/from memory */
/* check main status, clearing INTRQ if needed */
status = ata_sff_irq_status(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
+ if (status & ATA_BUSY) {
+ if (bmdma_stopped) {
+ /* BMDMA engine is already stopped, we're screwed */
+ qc->err_mask |= AC_ERR_HSM;
+ ap->hsm_task_state = HSM_ST_ERR;
+ } else
+ goto idle_irq;
+ }
/* ack bmdma irq events */
ap->ops->sff_irq_clear(ap);
irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
+ bool retried = false;
unsigned int i;
- unsigned int handled = 0, polling = 0;
+ unsigned int handled, idle, polling;
unsigned long flags;
/* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */
spin_lock_irqsave(&host->lock, flags);
+retry:
+ handled = idle = polling = 0;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
struct ata_queued_cmd *qc;
handled |= ata_sff_host_intr(ap, qc);
else
polling |= 1 << i;
- }
+ } else
+ idle |= 1 << i;
}
/*
* asserting IRQ line, nobody cared will ensue. Check IRQ
* pending status if available and clear spurious IRQ.
*/
- if (!handled) {
+ if (!handled && !retried) {
+ bool retry = false;
+
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
!ap->ops->sff_irq_check(ap))
continue;
- if (printk_ratelimit())
- ata_port_printk(ap, KERN_INFO,
- "clearing spurious IRQ\n");
+ if (idle & (1 << i)) {
+ ap->ops->sff_check_status(ap);
+ ap->ops->sff_irq_clear(ap);
+ } else {
+ /* clear INTRQ and check if BUSY cleared */
+ if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
+ retry |= true;
+ /*
+ * With command in flight, we can't do
+ * sff_irq_clear() w/o racing with completion.
+ */
+ }
+ }
- ap->ops->sff_check_status(ap);
- ap->ops->sff_irq_clear(ap);
+ if (retry) {
+ retried = true;
+ goto retry;
}
}
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <acpi/acpi_bus.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/clk.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/pmu.h>
#include <linux/scatterlist.h>
#include <linux/of.h>
+#include <linux/gfp.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/libata.h>
#include <linux/of_platform.h>
#include <linux/module.h>
#include <linux/libata.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
*
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>
u8 rev = isa->revision;
pci_dev_put(isa);
+ if ((id->device == 0x0415 || id->device == 0x3164) &&
+ (config->id != id->device))
+ continue;
+
if (rev >= config->rev_min && rev <= config->rev_max)
break;
}
{ PCI_VDEVICE(VIA, 0x3164), },
{ PCI_VDEVICE(VIA, 0x5324), },
{ PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE },
+ { PCI_VDEVICE(VIA, 0x9001), VIA_IDFLAG_SINGLE },
{ },
};
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
* happy to assist.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/ata_platform.h>
#include <linux/mbus.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <linux/mutex.h>
#include <linux/firmware.h>
#include <linux/ihex.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include <linux/atm_tcp.h>
#include <linux/bitops.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/init.h>
#include <linux/atm_eni.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/system.h>
#include <asm/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/capability.h>
#include <linux/atm_idt77105.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/param.h>
#include <asm/uaccess.h>
#include <linux/wait.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/uio.h>
#include <linux/init.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/atomic.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/atmdev.h>
#include <asm/io.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/firmware.h>
#include <linux/ctype.h>
#include <linux/swab.h>
+#include <linux/slab.h>
#define VERSION "0.07"
#define PTAG "solos-pci"
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/atm_suni.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/param.h>
#include <asm/uaccess.h>
#include <linux/atmdev.h>
#include <linux/sonet.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/capability.h>
#include <linux/bitops.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/system.h>
#include <asm/string.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/cdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/uaccess.h>
#include <linux/cfag12864b.h>
return sysfs_create_group(&classdev->kobj, cont->grp);
for (i = 0; attrs[i]; i++) {
+ sysfs_attr_init(&attrs[i]->attr);
error = device_create_file(classdev, attrs[i]);
if (error)
return error;
#include <linux/device.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/string.h>
#include "base.h"
#include <linux/topology.h>
#include <linux/device.h>
#include <linux/node.h>
+#include <linux/gfp.h>
#include "base.h"
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "base.h"
#include <linux/cred.h>
#include <linux/sched.h>
#include <linux/init_task.h>
+#include <linux/slab.h>
static struct vfsmount *dev_mnt;
* Coherent per-device memory handling.
* Borrowed from i386
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
*/
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
/*
* Managed DMA API
#include <linux/device.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include "base.h"
#include <linux/kthread.h>
#include <linux/highmem.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#define to_dev(obj) container_of(obj, struct device, kobj)
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
print_block_size(struct sysdev_class *class, struct sysdev_class_attribute *attr,
char *buf)
{
- return sprintf(buf, "%#lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+ return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
}
static SYSDEV_CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
#include <linux/device.h>
#include <linux/module.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include "base.h"
#include <linux/cpu.h>
#include <linux/device.h>
#include <linux/swap.h>
+#include <linux/slab.h>
static struct sysdev_class_attribute *node_state_attrs[];
if (dev->bus && dev->bus->pm) {
pm_dev_dbg(dev, state, "EARLY ");
error = pm_noirq_op(dev, dev->bus->pm, state);
+ if (error)
+ goto End;
}
+ if (dev->type && dev->type->pm) {
+ pm_dev_dbg(dev, state, "EARLY type ");
+ error = pm_noirq_op(dev, dev->type->pm, state);
+ if (error)
+ goto End;
+ }
+
+ if (dev->class && dev->class->pm) {
+ pm_dev_dbg(dev, state, "EARLY class ");
+ error = pm_noirq_op(dev, dev->class->pm, state);
+ }
+
+End:
TRACE_RESUME(error);
return error;
}
{
int error = 0;
+ if (dev->class && dev->class->pm) {
+ pm_dev_dbg(dev, state, "LATE class ");
+ error = pm_noirq_op(dev, dev->class->pm, state);
+ if (error)
+ goto End;
+ }
+
+ if (dev->type && dev->type->pm) {
+ pm_dev_dbg(dev, state, "LATE type ");
+ error = pm_noirq_op(dev, dev->type->pm, state);
+ if (error)
+ goto End;
+ }
+
if (dev->bus && dev->bus->pm) {
pm_dev_dbg(dev, state, "LATE ");
error = pm_noirq_op(dev, dev->bus->pm, state);
}
+
+End:
return error;
}
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/pm.h>
#include <linux/device.h>
Controller->RequestQueue[n] = RequestQueue;
blk_queue_bounce_limit(RequestQueue, Controller->BounceBufferLimit);
RequestQueue->queuedata = Controller;
- blk_queue_max_hw_segments(RequestQueue, Controller->DriverScatterGatherLimit);
blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit);
blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand);
disk->queue = RequestQueue;
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/fd.h>
#include <linux/hdreg.h>
#include <linux/backing-dev.h>
#include <linux/fs.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <linux/genhd.h>
#include <linux/netdevice.h>
#include "aoe.h"
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/skbuff.h>
#include "aoe.h"
*/
#include <linux/ata.h>
+#include <linux/slab.h>
#include <linux/hdreg.h>
#include <linux/blkdev.h>
#include <linux/skbuff.h>
#include <linux/blkdev.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "aoe.h"
static void dummy_timer(ulong);
* Ethernet portion of AoE driver
*/
+#include <linux/gfp.h>
#include <linux/hdreg.h>
#include <linux/blkdev.h>
#include <linux/netdevice.h>
#include <linux/blkdev.h>
#include <linux/bio.h>
#include <linux/highmem.h>
-#include <linux/gfp.h>
#include <linux/radix-tree.h>
#include <linux/buffer_head.h> /* invalidate_bh_lrus() */
+#include <linux/slab.h>
#include <asm/uaccess.h>
printk(KERN_WARNING
"cciss: controller cciss%d failed, stopping.\n",
h->ctlr);
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
fail_all_cmds(h->ctlr);
return IRQ_HANDLED;
}
put_ldev(mdev);
}
+/* sector to word */
#define S2W(s) ((s)<<(BM_EXT_SHIFT-BM_BLOCK_SHIFT-LN2_BPL))
+
/* activity log to on disk bitmap -- prepare bio unless that sector
* is already covered by previously prepared bios */
static int atodb_prepare_unless_covered(struct drbd_conf *mdev,
{
struct bio *bio;
struct page *page;
- sector_t on_disk_sector = enr + mdev->ldev->md.md_offset
- + mdev->ldev->md.bm_offset;
+ sector_t on_disk_sector;
unsigned int page_offset = PAGE_SIZE;
int offset;
int i = 0;
int err = -ENOMEM;
+ /* We always write aligned, full 4k blocks,
+ * so we can ignore the logical_block_size (for now) */
+ enr &= ~7U;
+ on_disk_sector = enr + mdev->ldev->md.md_offset
+ + mdev->ldev->md.bm_offset;
+
+ D_ASSERT(!(on_disk_sector & 7U));
+
/* Check if that enr is already covered by an already created bio.
* Caution, bios[] is not NULL terminated,
* but only initialized to all NULL.
offset = S2W(enr);
drbd_bm_get_lel(mdev, offset,
- min_t(size_t, S2W(1), drbd_bm_words(mdev) - offset),
+ min_t(size_t, S2W(8), drbd_bm_words(mdev) - offset),
kmap(page) + page_offset);
kunmap(page);
bio->bi_bdev = mdev->ldev->md_bdev;
bio->bi_sector = on_disk_sector;
- if (bio_add_page(bio, page, MD_SECTOR_SIZE, page_offset) != MD_SECTOR_SIZE)
+ if (bio_add_page(bio, page, 4096, page_offset) != 4096)
goto out_put_page;
atomic_inc(&wc->count);
/* ok, ->resync is there. */
for (i = 0; i < mdev->resync->nr_elements; i++) {
e = lc_element_by_index(mdev->resync, i);
- bm_ext = e ? lc_entry(e, struct bm_extent, lce) : NULL;
+ bm_ext = lc_entry(e, struct bm_extent, lce);
if (bm_ext->lce.lc_number == LC_FREE)
continue;
if (bm_ext->lce.lc_number == mdev->resync_wenr) {
#include <linux/vmalloc.h>
#include <linux/string.h>
#include <linux/drbd.h>
+#include <linux/slab.h>
#include <asm/kmap_types.h>
#include "drbd_int.h"
size_t bm_words;
size_t bm_number_of_pages;
sector_t bm_dev_capacity;
- struct semaphore bm_change; /* serializes resize operations */
+ struct mutex bm_change; /* serializes resize operations */
atomic_t bm_async_io;
wait_queue_head_t bm_io_wait;
return;
}
- trylock_failed = down_trylock(&b->bm_change);
+ trylock_failed = !mutex_trylock(&b->bm_change);
if (trylock_failed) {
dev_warn(DEV, "%s going to '%s' but bitmap already locked for '%s' by %s\n",
b->bm_task == mdev->receiver.task ? "receiver" :
b->bm_task == mdev->asender.task ? "asender" :
b->bm_task == mdev->worker.task ? "worker" : "?");
- down(&b->bm_change);
+ mutex_lock(&b->bm_change);
}
if (__test_and_set_bit(BM_LOCKED, &b->bm_flags))
dev_err(DEV, "FIXME bitmap already locked in bm_lock\n");
b->bm_why = NULL;
b->bm_task = NULL;
- up(&b->bm_change);
+ mutex_unlock(&b->bm_change);
}
/* word offset to long pointer */
if (!b)
return -ENOMEM;
spin_lock_init(&b->bm_lock);
- init_MUTEX(&b->bm_change);
+ mutex_init(&b->bm_change);
init_waitqueue_head(&b->bm_io_wait);
mdev->bitmap = b;
[P_OV_REQUEST] = "OVRequest",
[P_OV_REPLY] = "OVReply",
[P_OV_RESULT] = "OVResult",
+ [P_CSUM_RS_REQUEST] = "CsumRSRequest",
+ [P_RS_IS_IN_SYNC] = "CsumRSIsInSync",
+ [P_COMPRESSED_BITMAP] = "CBitmap",
[P_MAX_CMD] = NULL,
};
char csums_alg[SHARED_SECRET_MAX];
} __packed;
+enum drbd_conn_flags {
+ CF_WANT_LOSE = 1,
+ CF_DRY_RUN = 2,
+};
+
struct p_protocol {
struct p_header head;
u32 protocol;
u32 after_sb_0p;
u32 after_sb_1p;
u32 after_sb_2p;
- u32 want_lose;
+ u32 conn_flags;
u32 two_primaries;
/* Since protocol version 87 and higher. */
* while this is set. */
RESIZE_PENDING, /* Size change detected locally, waiting for the response from
* the peer, if it changed there as well. */
+ CONN_DRY_RUN, /* Expect disconnect after resync handshake. */
+ GOT_PING_ACK, /* set when we receive a ping_ack packet, misc wait gets woken */
};
struct drbd_bitmap; /* opaque for drbd_conf */
int drbd_send_protocol(struct drbd_conf *mdev)
{
struct p_protocol *p;
- int size, rv;
+ int size, cf, rv;
size = sizeof(struct p_protocol);
p->after_sb_0p = cpu_to_be32(mdev->net_conf->after_sb_0p);
p->after_sb_1p = cpu_to_be32(mdev->net_conf->after_sb_1p);
p->after_sb_2p = cpu_to_be32(mdev->net_conf->after_sb_2p);
- p->want_lose = cpu_to_be32(mdev->net_conf->want_lose);
p->two_primaries = cpu_to_be32(mdev->net_conf->two_primaries);
+ cf = 0;
+ if (mdev->net_conf->want_lose)
+ cf |= CF_WANT_LOSE;
+ if (mdev->net_conf->dry_run) {
+ if (mdev->agreed_pro_version >= 92)
+ cf |= CF_DRY_RUN;
+ else {
+ dev_err(DEV, "--dry-run is not supported by peer");
+ kfree(p);
+ return 0;
+ }
+ }
+ p->conn_flags = cpu_to_be32(cf);
+
if (mdev->agreed_pro_version >= 87)
strcpy(p->integrity_alg, mdev->net_conf->integrity_alg);
void drbd_free_sock(struct drbd_conf *mdev)
{
if (mdev->data.socket) {
+ mutex_lock(&mdev->data.mutex);
kernel_sock_shutdown(mdev->data.socket, SHUT_RDWR);
sock_release(mdev->data.socket);
mdev->data.socket = NULL;
+ mutex_unlock(&mdev->data.mutex);
}
if (mdev->meta.socket) {
+ mutex_lock(&mdev->meta.mutex);
kernel_sock_shutdown(mdev->meta.socket, SHUT_RDWR);
sock_release(mdev->meta.socket);
mdev->meta.socket = NULL;
+ mutex_unlock(&mdev->meta.mutex);
}
}
}
if (r == SS_NO_UP_TO_DATE_DISK && force &&
- (mdev->state.disk == D_INCONSISTENT ||
- mdev->state.disk == D_OUTDATED)) {
+ (mdev->state.disk < D_UP_TO_DATE &&
+ mdev->state.disk >= D_INCONSISTENT)) {
mask.disk = D_MASK;
val.disk = D_UP_TO_DATE;
forced = 1;
}
reply->ret_code =
- drbd_set_role(mdev, R_PRIMARY, primary_args.overwrite_peer);
+ drbd_set_role(mdev, R_PRIMARY, primary_args.primary_force);
return 0;
}
drbd_md_set_sector_offsets(mdev, nbc);
+ /* allocate a second IO page if logical_block_size != 512 */
+ logical_block_size = bdev_logical_block_size(nbc->md_bdev);
+ if (logical_block_size == 0)
+ logical_block_size = MD_SECTOR_SIZE;
+
+ if (logical_block_size != MD_SECTOR_SIZE) {
+ if (!mdev->md_io_tmpp) {
+ struct page *page = alloc_page(GFP_NOIO);
+ if (!page)
+ goto force_diskless_dec;
+
+ dev_warn(DEV, "Meta data's bdev logical_block_size = %d != %d\n",
+ logical_block_size, MD_SECTOR_SIZE);
+ dev_warn(DEV, "Workaround engaged (has performance impact).\n");
+
+ mdev->md_io_tmpp = page;
+ }
+ }
+
if (!mdev->bitmap) {
if (drbd_bm_init(mdev)) {
retcode = ERR_NOMEM;
goto force_diskless_dec;
}
- /* allocate a second IO page if logical_block_size != 512 */
- logical_block_size = bdev_logical_block_size(nbc->md_bdev);
- if (logical_block_size == 0)
- logical_block_size = MD_SECTOR_SIZE;
-
- if (logical_block_size != MD_SECTOR_SIZE) {
- if (!mdev->md_io_tmpp) {
- struct page *page = alloc_page(GFP_NOIO);
- if (!page)
- goto force_diskless_dec;
-
- dev_warn(DEV, "Meta data's bdev logical_block_size = %d != %d\n",
- logical_block_size, MD_SECTOR_SIZE);
- dev_warn(DEV, "Workaround engaged (has performance impact).\n");
-
- mdev->md_io_tmpp = page;
- }
- }
-
/* Reset the "barriers don't work" bits here, then force meta data to
* be written, to ensure we determine if barriers are supported. */
if (nbc->dc.no_md_flush)
#include <asm/uaccess.h>
#include <linux/fs.h>
#include <linux/file.h>
-#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/drbd.h>
drbd_thread_start(&mdev->asender);
- drbd_send_protocol(mdev);
+ if (!drbd_send_protocol(mdev))
+ return -1;
drbd_send_sync_param(mdev, &mdev->sync_conf);
drbd_send_sizes(mdev, 0);
drbd_send_uuids(mdev);
}
if (hg == -100) {
+ /* FIXME this log message is not correct if we end up here
+ * after an attempted attach on a diskless node.
+ * We just refuse to attach -- well, we drop the "connection"
+ * to that disk, in a way... */
dev_alert(DEV, "Split-Brain detected, dropping connection!\n");
drbd_khelper(mdev, "split-brain");
return C_MASK;
}
}
+ if (mdev->net_conf->dry_run || test_bit(CONN_DRY_RUN, &mdev->flags)) {
+ if (hg == 0)
+ dev_info(DEV, "dry-run connect: No resync, would become Connected immediately.\n");
+ else
+ dev_info(DEV, "dry-run connect: Would become %s, doing a %s resync.",
+ drbd_conn_str(hg > 0 ? C_SYNC_SOURCE : C_SYNC_TARGET),
+ abs(hg) >= 2 ? "full" : "bit-map based");
+ return C_MASK;
+ }
+
if (abs(hg) >= 2) {
dev_info(DEV, "Writing the whole bitmap, full sync required after drbd_sync_handshake.\n");
if (drbd_bitmap_io(mdev, &drbd_bmio_set_n_write, "set_n_write from sync_handshake"))
struct p_protocol *p = (struct p_protocol *)h;
int header_size, data_size;
int p_proto, p_after_sb_0p, p_after_sb_1p, p_after_sb_2p;
- int p_want_lose, p_two_primaries;
+ int p_want_lose, p_two_primaries, cf;
char p_integrity_alg[SHARED_SECRET_MAX] = "";
header_size = sizeof(*p) - sizeof(*h);
p_after_sb_0p = be32_to_cpu(p->after_sb_0p);
p_after_sb_1p = be32_to_cpu(p->after_sb_1p);
p_after_sb_2p = be32_to_cpu(p->after_sb_2p);
- p_want_lose = be32_to_cpu(p->want_lose);
p_two_primaries = be32_to_cpu(p->two_primaries);
+ cf = be32_to_cpu(p->conn_flags);
+ p_want_lose = cf & CF_WANT_LOSE;
+
+ clear_bit(CONN_DRY_RUN, &mdev->flags);
+
+ if (cf & CF_DRY_RUN)
+ set_bit(CONN_DRY_RUN, &mdev->flags);
if (p_proto != mdev->net_conf->wire_protocol) {
dev_err(DEV, "incompatible communication protocols\n");
put_ldev(mdev);
if (nconn == C_MASK) {
+ nconn = C_CONNECTED;
if (mdev->state.disk == D_NEGOTIATING) {
drbd_force_state(mdev, NS(disk, D_DISKLESS));
- nconn = C_CONNECTED;
} else if (peer_state.disk == D_NEGOTIATING) {
dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
peer_state.disk = D_DISKLESS;
+ real_peer_disk = D_DISKLESS;
} else {
+ if (test_and_clear_bit(CONN_DRY_RUN, &mdev->flags))
+ return FALSE;
D_ASSERT(oconn == C_WF_REPORT_PARAMS);
drbd_force_state(mdev, NS(conn, C_DISCONNECTING));
return FALSE;
/* asender does not clean up anything. it must not interfere, either */
drbd_thread_stop(&mdev->asender);
-
- mutex_lock(&mdev->data.mutex);
drbd_free_sock(mdev);
- mutex_unlock(&mdev->data.mutex);
spin_lock_irq(&mdev->req_lock);
_drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
{
/* restore idle timeout */
mdev->meta.socket->sk->sk_rcvtimeo = mdev->net_conf->ping_int*HZ;
+ if (!test_and_set_bit(GOT_PING_ACK, &mdev->flags))
+ wake_up(&mdev->misc_wait);
return TRUE;
}
if (unlikely(error)) {
what = (bio_data_dir(bio) == WRITE)
? write_completed_with_error
- : (bio_rw(bio) == READA)
+ : (bio_rw(bio) == READ)
? read_completed_with_error
: read_ahead_completed_with_error;
} else
if (eq) {
drbd_set_in_sync(mdev, e->sector, e->size);
- mdev->rs_same_csum++;
+ /* rs_same_csums unit is BM_BLOCK_SIZE */
+ mdev->rs_same_csum += e->size >> BM_BLOCK_SHIFT;
ok = drbd_send_ack(mdev, P_RS_IS_IN_SYNC, e);
} else {
inc_rs_pending(mdev);
return retcode;
}
+static void ping_peer(struct drbd_conf *mdev)
+{
+ clear_bit(GOT_PING_ACK, &mdev->flags);
+ request_ping(mdev);
+ wait_event(mdev->misc_wait,
+ test_bit(GOT_PING_ACK, &mdev->flags) || mdev->state.conn < C_CONNECTED);
+}
+
/**
* drbd_start_resync() - Start the resync process
* @mdev: DRBD device.
_drbd_pause_after(mdev);
}
write_unlock_irq(&global_state_lock);
- drbd_state_unlock(mdev);
put_ldev(mdev);
if (r == SS_SUCCESS) {
if (mdev->rs_total == 0) {
/* Peer still reachable? Beware of failing before-resync-target handlers! */
- request_ping(mdev);
- __set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(mdev->net_conf->ping_timeo*HZ/9); /* 9 instead 10 */
+ ping_peer(mdev);
drbd_resync_finished(mdev);
- return;
}
/* ns.conn may already be != mdev->state.conn,
drbd_md_sync(mdev);
}
+ drbd_state_unlock(mdev);
}
int drbd_worker(struct drbd_thread *thi)
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/genhd.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/buffer_head.h> /* for invalidate_bdev() */
#include <linux/completion.h>
#include <linux/highmem.h>
-#include <linux/gfp.h>
#include <linux/kthread.h>
#include <linux/splice.h>
if (ret)
goto fail;
+ file_update_time(file);
+
transfer_result = lo_do_transfer(lo, WRITE, page, offset,
bvec->bv_page, bv_offs, size, IV);
copied = size;
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mg_disk.h>
+#include <linux/slab.h>
#define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
#include <linux/compiler.h>
#include <linux/err.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/net.h>
#include <linux/kthread.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <scsi/osd_initiator.h>
#include <scsi/osd_attributes.h>
#include <scsi/osd_sec.h>
&& (j++ < PCD_SPIN))
udelay(PCD_DELAY);
- if ((r & (IDE_ERR & stop)) || (j >= PCD_SPIN)) {
+ if ((r & (IDE_ERR & stop)) || (j > PCD_SPIN)) {
s = read_reg(cd, 7);
e = read_reg(cd, 1);
p = read_reg(cd, 2);
- if (j >= PCD_SPIN)
+ if (j > PCD_SPIN)
e |= 0x100;
if (fun)
printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
&& (j++ < PF_SPIN))
udelay(PF_SPIN_DEL);
- if ((r & (STAT_ERR & stop)) || (j >= PF_SPIN)) {
+ if ((r & (STAT_ERR & stop)) || (j > PF_SPIN)) {
s = read_reg(pf, 7);
e = read_reg(pf, 1);
p = read_reg(pf, 2);
- if (j >= PF_SPIN)
+ if (j > PF_SPIN)
e |= 0x100;
if (fun)
printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
&& (j++ < PT_SPIN))
udelay(PT_SPIN_DEL);
- if ((r & (STAT_ERR & stop)) || (j >= PT_SPIN)) {
+ if ((r & (STAT_ERR & stop)) || (j > PT_SPIN)) {
s = read_reg(pi, 7);
e = read_reg(pi, 1);
p = read_reg(pi, 2);
- if (j >= PT_SPIN)
+ if (j > PT_SPIN)
e |= 0x100;
if (fun)
printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/compat.h>
#include <linux/kthread.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/miscdevice.h>
#include <linux/freezer.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/scsi.h>
mutex_unlock(&ctl_mutex);
}
-static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+static long pkt_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
struct pkt_ctrl_command ctrl_cmd;
return ret;
}
+#ifdef CONFIG_COMPAT
+static long pkt_ctl_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ return pkt_ctl_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
static const struct file_operations pkt_ctl_fops = {
- .ioctl = pkt_ctl_ioctl,
- .owner = THIS_MODULE,
+ .open = nonseekable_open,
+ .unlocked_ioctl = pkt_ctl_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = pkt_ctl_compat_ioctl,
+#endif
+ .owner = THIS_MODULE,
};
static struct miscdevice pkt_misc = {
#include <linux/ata.h>
#include <linux/blkdev.h>
+#include <linux/slab.h>
#include <asm/lv1call.h>
#include <asm/ps3stor.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/cell-regs.h>
#include <asm/firmware.h>
#include <linux/module.h>
#include <linux/fd.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/kernel.h>
#include <linux/blkdev.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#define DRV_NAME "ub"
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/mman.h>
+#include <linux/gfp.h>
#include <linux/ioctl.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/fcntl.h> /* O_ACCMODE */
//#define DEBUG
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/virtio.h>
set_capacity(vblk->disk, cap);
/* We can handle whatever the host told us to handle. */
- blk_queue_max_phys_segments(q, vblk->sg_elems-2);
- blk_queue_max_hw_segments(q, vblk->sg_elems-2);
+ blk_queue_max_segments(q, vblk->sg_elems-2);
/* No need to bounce any requests */
blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);
/* No real sector limit. */
- blk_queue_max_sectors(q, -1U);
+ blk_queue_max_hw_sectors(q, -1U);
/* Host can optionally specify maximum segment size and number of
* segments. */
#include <linux/blkpg.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/hdreg.h>
#include <linux/cdrom.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <xen/xen.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
**/
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include <linux/kthread.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <net/bluetooth/bluetooth.h>
#define BTM_HEADER_LEN 4
**/
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio_func.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
-#include <linux/gfp.h>
#include <linux/page-flags.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include "agp.h"
#define AMD_MMBASE 0x14
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/miscdevice.h>
#include <linux/pm.h>
#include <linux/pci.h>
#include <linux/fs.h>
#include <linux/agpgart.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "agp.h"
#include "compat_ioctl.h"
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
#include <asm/pgtable.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <asm/acpi-ext.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pagemap.h>
#define IS_PINEVIEW (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_PINEVIEW_HB)
+#define IS_SNB (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB)
+
#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_EAGLELAKE_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB || \
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB || \
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB)
+ IS_SNB)
extern int agp_memory_reserved;
#define SNB_GMCH_GMS_STOLEN_448M (0xe << 3)
#define SNB_GMCH_GMS_STOLEN_480M (0xf << 3)
#define SNB_GMCH_GMS_STOLEN_512M (0x10 << 3)
+#define SNB_GTT_SIZE_0M (0 << 8)
+#define SNB_GTT_SIZE_1M (1 << 8)
+#define SNB_GTT_SIZE_2M (2 << 8)
+#define SNB_GTT_SIZE_MASK (3 << 8)
static const struct aper_size_info_fixed intel_i810_sizes[] =
{
if (intel_private.ifp_resource.start)
return;
+ if (IS_SNB)
+ return;
+
/* setup a resource for this object */
intel_private.ifp_resource.name = "Intel Flush Page";
intel_private.ifp_resource.flags = IORESOURCE_MEM;
static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size)
{
+ u16 snb_gmch_ctl;
+
switch (agp_bridge->dev->device) {
case PCI_DEVICE_ID_INTEL_GM45_HB:
case PCI_DEVICE_ID_INTEL_EAGLELAKE_HB:
case PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB:
case PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB:
case PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB:
+ *gtt_offset = *gtt_size = MB(2);
+ break;
case PCI_DEVICE_ID_INTEL_SANDYBRIDGE_HB:
case PCI_DEVICE_ID_INTEL_SANDYBRIDGE_M_HB:
- *gtt_offset = *gtt_size = MB(2);
+ *gtt_offset = MB(2);
+
+ pci_read_config_word(intel_private.pcidev, SNB_GMCH_CTRL, &snb_gmch_ctl);
+ switch (snb_gmch_ctl & SNB_GTT_SIZE_MASK) {
+ default:
+ case SNB_GTT_SIZE_0M:
+ printk(KERN_ERR "Bad GTT size mask: 0x%04x.\n", snb_gmch_ctl);
+ *gtt_size = MB(0);
+ break;
+ case SNB_GTT_SIZE_1M:
+ *gtt_size = MB(1);
+ break;
+ case SNB_GTT_SIZE_2M:
+ *gtt_size = MB(2);
+ break;
+ }
break;
default:
*gtt_offset = *gtt_size = KB(512);
pci_write_config_byte(agp_bridge->dev, INTEL_I845_AGPM, temp2 | (1 << 1));
/* clear any possible error conditions */
pci_write_config_word(agp_bridge->dev, INTEL_I845_ERRSTS, 0x001c);
-
- intel_i830_setup_flush();
return 0;
}
.agp_destroy_page = agp_generic_destroy_page,
.agp_destroy_pages = agp_generic_destroy_pages,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
- .chipset_flush = intel_i830_chipset_flush,
};
static const struct agp_bridge_driver intel_850_driver = {
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
-#include <linux/gfp.h>
#include <linux/page-flags.h>
#include <linux/mm.h>
#include <linux/jiffies.h>
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <asm/sn/addrs.h>
*/
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/agp_backend.h>
state->baud_base = amiga_colorclock;
state->xmit_fifo_size = 1;
- local_irq_save(flags);
-
/* set ISRs, and then disable the rx interrupts */
error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
if (error)
if (error)
goto fail_free_irq;
+ local_irq_save(flags);
+
/* turn off Rx and Tx interrupts */
custom.intena = IF_RBF | IF_TBE;
mb();
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/miscdevice.h>
#include <linux/cdev.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <asm/pgtable.h>
#include <asm/io.h>
#include <linux/bitops.h>
#include <linux/firmware.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/uaccess.h>
*/
#include <linux/module.h>
-#include <linux/slab.h> /* for kmalloc() and kfree() */
#include <linux/major.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/ctype.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/interrupt.h>
#include <linux/tty_flip.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#define DEBUG
#include <linux/seq_file.h>
#include <linux/bitops.h>
#include <linux/clocksource.h>
+#include <linux/slab.h>
#include <asm/current.h>
#include <asm/uaccess.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/freezer.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
hp = tty->driver_data;
spin_lock_irqsave(&hp->lock, flags);
- tty_kref_get(tty);
if (--hp->count == 0) {
/* We are done with the tty pointer now. */
hp->tty = NULL;
spin_unlock_irqrestore(&hp->lock, flags);
- /* Put the ref obtained in hvc_open() */
- tty_kref_put(tty);
-
if (hp->ops->notifier_del)
hp->ops->notifier_del(hp, hp->data);
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/types.h>
+#include <linux/slab.h>
#include <asm/ebcdic.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
#include <linux/tty.h>
#include <linux/pci.h>
#include <linux/stop_machine.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/device.h>
#include <linux/hw_random.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-rnm-defs.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/hw_random.h>
+#include <linux/gfp.h>
#define TX4939_RNG_RCSR 0x00000000
#define TX4939_RNG_ROR(n) (0x00000018 + (n) * 8)
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/io.h>
if (tport == NULL)
return -ENODEV;
port = container_of(tport, struct isi_port, port);
- card = &isi_card[BOARD(tty->index)];
+ tty->driver_data = port;
return tty_port_open(tport, tty, filp);
}
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *ip = tty->driver_data;
- struct tty_port *port = &ip->port;
+ struct tty_port *port;
+
+ if (ip == NULL)
+ return;
+
+ port = &ip->port;
if (isicom_paranoia_check(ip, tty->name, "isicom_close"))
return;
tty_port_close(port, tty, filp);
return -ENODEV;
if (portp->devnr < 1)
return -ENODEV;
+
+ tty->driver_data = portp;
return tty_port_open(&portp->port, tty, filp);
}
#include <linux/uio.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/system.h>
* outside of main memory.
*
*/
+#ifdef pgprot_noncached
static int uncached_access(struct file *file, unsigned long addr)
{
#if defined(CONFIG_IA64)
return addr >= __pa(high_memory);
#endif
}
+#endif
static pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
switch (orig) {
case SEEK_CUR:
offset += file->f_pos;
- if ((unsigned long long)offset <
- (unsigned long long)file->f_pos) {
- ret = -EOVERFLOW;
- break;
- }
case SEEK_SET:
/* to avoid userland mistaking f_pos=-9 as -EBADF=-9 */
if ((unsigned long long)offset >= ~0xFFFULL) {
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
mem_class = class_create(THIS_MODULE, "mem");
+ if (IS_ERR(mem_class))
+ return PTR_ERR(mem_class);
+
mem_class->devnode = mem_devnode;
for (minor = 1; minor < ARRAY_SIZE(devlist); minor++) {
if (!devlist[minor].name)
#include <linux/miscdevice.h>
#include <linux/kernel.h>
#include <linux/major.h>
-#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/tty.h>
#include <linux/kmod.h>
+#include <linux/gfp.h>
/*
* Head entry for the doubly linked miscdevice list
#include <linux/time.h>
#include <linux/math64.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/sn/addrs.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
-#include <linux/gfp.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
if (!info->ioaddr)
return -ENODEV;
+ tty->driver_data = info;
return tty_port_open(&info->port, tty, filp);
}
struct mxser_port *info = tty->driver_data;
struct tty_port *port = &info->port;
- if (tty->index == MXSER_PORTS)
+ if (tty->index == MXSER_PORTS || info == NULL)
return;
if (tty_port_close_start(port, tty, filp) == 0)
return;
int len, lsr;
len = mxser_chars_in_buffer(tty);
- spin_lock(&info->slock);
+ spin_lock_irq(&info->slock);
lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE;
spin_unlock_irq(&info->slock);
len += (lsr ? 0 : 1);
case MOXA_ASPP_MON: {
int mcr, status;
- spin_lock(&info->slock);
+ spin_lock_irq(&info->slock);
status = mxser_get_msr(info->ioaddr, 1, tty->index);
mxser_check_modem_status(tty, info, status);
mcr = inb(info->ioaddr + UART_MCR);
- spin_unlock(&info->slock);
+ spin_unlock_irq(&info->slock);
if (mcr & MOXA_MUST_MCR_XON_FLAG)
info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD;
#include <linux/init.h>
#include <linux/kfifo.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
#include <linux/mc146818rtc.h>
xoutb(0, REG_FLAGS1(iobase)); /* clear detectCMM */
/* last check before exit */
- if (!io_detect_cm4000(iobase, dev))
- count = -ENODEV;
+ if (!io_detect_cm4000(iobase, dev)) {
+ rc = -ENODEV;
+ goto release_io;
+ }
if (test_bit(IS_INVREV, &dev->flags) && count > 0)
str_invert_revert(dev->rbuf, count);
if (copy_to_user(buf, dev->rbuf, count))
- return -EFAULT;
+ rc = -EFAULT;
release_io:
clear_bit(LOCK_IO, &dev->flags);
#include <linux/netdevice.h>
#include <linux/ppp_channel.h>
#include <linux/ppp_defs.h>
+#include <linux/slab.h>
#include <linux/if_ppp.h>
#include <linux/skbuff.h>
#include <linux/parport.h>
#include <linux/ctype.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/major.h>
#include <linux/ppdev.h>
#include <linux/smp_lock.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/lv1call.h>
#include <linux/uaccess.h>
#include <linux/bitops.h>
#include <linux/devpts_fs.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
.aio_read = generic_file_aio_read,
.write = do_sync_write,
.aio_write = blkdev_aio_write,
+ .fsync = blkdev_fsync,
.open = raw_open,
.release= raw_release,
.ioctl = raw_ioctl,
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <asm/io.h>
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <asm/io.h>
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/string.h>
if (error)
return error;
+ tty->driver_data = port;
return tty_port_open(&port->port, tty, filp);
}
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/tty_flip.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/sn/sn_sal.h>
#include <asm/unaligned.h>
#include <linux/err.h>
#include <linux/kfifo.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/uaccess.h>
+#include <linux/gfp.h>
#include "specialix_io8.h"
#include "cd1865.h"
{
struct stlport *portp;
struct stlbrd *brdp;
- struct tty_port *port;
unsigned int minordev, brdnr, panelnr;
int portnr;
portp = brdp->panels[panelnr]->ports[portnr];
if (portp == NULL)
return -ENODEV;
- port = &portp->port;
+
+ tty->driver_data = portp;
return tty_port_open(&portp->port, tty, filp);
}
pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
portp = tty->driver_data;
- BUG_ON(portp == NULL);
+ if(portp == NULL)
+ return;
tty_port_close(&portp->port, tty, filp);
}
#include <linux/workqueue.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
+#include <linux/slab.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
*/
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/fs.h>
#include <linux/security.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <acpi/acpi.h>
#include "tpm.h"
*/
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "tpm.h"
/* National definitions */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/pnp.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include "tpm.h"
*/
#include <linux/audit.h>
+#include <linux/slab.h>
#include <linux/tty.h>
struct tty_audit_buf {
list_del_init(&tty->tty_files);
file_list_unlock();
+ put_pid(tty->pgrp);
+ put_pid(tty->session);
free_tty_struct(tty);
}
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
#include <linux/list.h>
#include <linux/poll.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/virtio.h>
#include <linux/virtio_console.h>
#include <linux/workqueue.h>
#include "hvc_console.h"
+/* Moved here from .h file in order to disable MULTIPORT. */
+#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
+
+struct virtio_console_multiport_conf {
+ struct virtio_console_config config;
+ /* max. number of ports this device can hold */
+ __u32 max_nr_ports;
+ /* number of ports added so far */
+ __u32 nr_ports;
+} __attribute__((packed));
+
+/*
+ * A message that's passed between the Host and the Guest for a
+ * particular port.
+ */
+struct virtio_console_control {
+ __u32 id; /* Port number */
+ __u16 event; /* The kind of control event (see below) */
+ __u16 value; /* Extra information for the key */
+};
+
+/* Some events for control messages */
+#define VIRTIO_CONSOLE_PORT_READY 0
+#define VIRTIO_CONSOLE_CONSOLE_PORT 1
+#define VIRTIO_CONSOLE_RESIZE 2
+#define VIRTIO_CONSOLE_PORT_OPEN 3
+#define VIRTIO_CONSOLE_PORT_NAME 4
+#define VIRTIO_CONSOLE_PORT_REMOVE 5
+
/*
* This is a global struct for storing common data for all the devices
* this driver handles.
spinlock_t cvq_lock;
/* The current config space is stored here */
- struct virtio_console_config config;
+ struct virtio_console_multiport_conf config;
/* The virtio device we're associated with */
struct virtio_device *vdev;
out_vq->vq_ops->kick(out_vq);
if (ret < 0) {
- len = 0;
+ in_count = 0;
goto fail;
}
- /*
- * Wait till the host acknowledges it pushed out the data we
- * sent. Also ensure we return to userspace the number of
- * bytes that were successfully consumed by the host.
- */
+ /* Wait till the host acknowledges it pushed out the data we sent. */
while (!out_vq->vq_ops->get_buf(out_vq, &len))
cpu_relax();
fail:
/* We're expected to return the amount of data we wrote */
- return len;
+ return in_count;
}
/*
{
struct port *port;
+ if (unlikely(early_put_chars))
+ return early_put_chars(vtermno, buf, count);
+
port = find_port_by_vtermno(vtermno);
if (!port)
return 0;
- if (unlikely(early_put_chars))
- return early_put_chars(vtermno, buf, count);
-
return send_buf(port, (void *)buf, count);
}
struct virtio_device *vdev;
struct winsize ws;
+ /* The port could have been hot-unplugged */
+ if (!port)
+ return;
+
vdev = port->portdev->vdev;
if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) {
vdev->config->get(vdev,
*/
err = sysfs_create_group(&port->dev->kobj,
&port_attribute_group);
- if (err)
+ if (err) {
dev_err(port->dev,
"Error %d creating sysfs device attributes\n",
err);
-
+ } else {
+ /*
+ * Generate a udev event so that appropriate
+ * symlinks can be created based on udev
+ * rules.
+ */
+ kobject_uevent(&port->dev->kobj, KOBJ_CHANGE);
+ }
break;
case VIRTIO_CONSOLE_PORT_REMOVE:
/*
*/
static void config_work_handler(struct work_struct *work)
{
- struct virtio_console_config virtconconf;
+ struct virtio_console_multiport_conf virtconconf;
struct ports_device *portdev;
struct virtio_device *vdev;
int err;
vdev = portdev->vdev;
vdev->config->get(vdev,
- offsetof(struct virtio_console_config, nr_ports),
+ offsetof(struct virtio_console_multiport_conf,
+ nr_ports),
&virtconconf.nr_ports,
sizeof(virtconconf.nr_ports));
multiport = false;
portdev->config.nr_ports = 1;
portdev->config.max_nr_ports = 1;
+#if 0 /* Multiport is not quite ready yet --RR */
if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) {
multiport = true;
vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT;
- vdev->config->get(vdev, offsetof(struct virtio_console_config,
- nr_ports),
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_multiport_conf,
+ nr_ports),
&portdev->config.nr_ports,
sizeof(portdev->config.nr_ports));
- vdev->config->get(vdev, offsetof(struct virtio_console_config,
- max_nr_ports),
+ vdev->config->get(vdev,
+ offsetof(struct virtio_console_multiport_conf,
+ max_nr_ports),
&portdev->config.max_nr_ports,
sizeof(portdev->config.max_nr_ports));
if (portdev->config.nr_ports > portdev->config.max_nr_ports) {
/* Let the Host know we support multiple ports.*/
vdev->config->finalize_features(vdev);
+#endif
err = init_vqs(portdev);
if (err < 0) {
static unsigned int features[] = {
VIRTIO_CONSOLE_F_SIZE,
- VIRTIO_CONSOLE_F_MULTIPORT,
};
static struct virtio_driver virtio_console = {
#include <linux/fcntl.h>
#include <linux/major.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/cdev.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
+#include <linux/slab.h>
struct sh_cmt_priv {
void __iomem *mapbase;
#include <linux/err.h>
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
+#include <linux/slab.h>
struct sh_mtu2_priv {
void __iomem *mapbase;
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/sh_timer.h>
+#include <linux/slab.h>
struct sh_tmu_priv {
void __iomem *mapbase;
#include <linux/ktime.h>
#include <linux/init.h>
#include <linux/connector.h>
+#include <linux/gfp.h>
#include <asm/atomic.h>
#include <asm/unaligned.h>
#include <linux/netlink.h>
#include <linux/moduleparam.h>
#include <linux/connector.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
unsigned int cpu = sys_dev->id;
unsigned long flags;
struct cpufreq_policy *data;
+ struct kobject *kobj;
+ struct completion *cmp;
#ifdef CONFIG_SMP
struct sys_device *cpu_sys_dev;
unsigned int j;
dprintk("removing link\n");
cpumask_clear_cpu(cpu, data->cpus);
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
- sysfs_remove_link(&sys_dev->kobj, "cpufreq");
+ kobj = &sys_dev->kobj;
cpufreq_cpu_put(data);
cpufreq_debug_enable_ratelimit();
unlock_policy_rwsem_write(cpu);
+ sysfs_remove_link(kobj, "cpufreq");
return 0;
}
#endif
data->governor->name, CPUFREQ_NAME_LEN);
#endif
cpu_sys_dev = get_cpu_sysdev(j);
- sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq");
+ kobj = &cpu_sys_dev->kobj;
+ unlock_policy_rwsem_write(cpu);
+ sysfs_remove_link(kobj, "cpufreq");
+ lock_policy_rwsem_write(cpu);
cpufreq_cpu_put(data);
}
}
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- kobject_put(&data->kobj);
+ kobj = &data->kobj;
+ cmp = &data->kobj_unregister;
+ unlock_policy_rwsem_write(cpu);
+ kobject_put(kobj);
/* we need to make sure that the underlying kobj is actually
* not referenced anymore by anybody before we proceed with
* unloading.
*/
dprintk("waiting for dropping of refcount\n");
- wait_for_completion(&data->kobj_unregister);
+ wait_for_completion(cmp);
dprintk("wait complete\n");
+ lock_policy_rwsem_write(cpu);
if (cpufreq_driver->exit)
cpufreq_driver->exit(data);
-
unlock_policy_rwsem_write(cpu);
free_cpumask_var(data->related_cpus);
static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
{
unsigned int load = 0;
+ unsigned int max_load = 0;
unsigned int freq_target;
struct cpufreq_policy *policy;
continue;
load = 100 * (wall_time - idle_time) / wall_time;
+
+ if (load > max_load)
+ max_load = load;
}
/*
return;
/* Check for frequency increase */
- if (load > dbs_tuners_ins.up_threshold) {
+ if (max_load > dbs_tuners_ins.up_threshold) {
this_dbs_info->down_skip = 0;
/* if we are already at full speed then break out early */
* can support the current CPU usage without triggering the up
* policy. To be safe, we focus 10 points under the threshold.
*/
- if (load < (dbs_tuners_ins.down_threshold - 10)) {
+ if (max_load < (dbs_tuners_ins.down_threshold - 10)) {
freq_target = (dbs_tuners_ins.freq_step * policy->max) / 100;
this_dbs_info->requested_freq -= freq_target;
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/sysdev.h>
#include <linux/cpu.h>
#include <linux/sysfs.h>
int needs_update;
unsigned int expected_us;
- unsigned int measured_us;
u64 predicted_us;
unsigned int exit_us;
unsigned int bucket;
int i;
int multiplier;
- data->last_state_idx = 0;
- data->exit_us = 0;
-
if (data->needs_update) {
menu_update(dev);
data->needs_update = 0;
}
+ data->last_state_idx = 0;
+ data->exit_us = 0;
+
/* Special case when user has set very strict latency requirement */
if (unlikely(latency_req == 0))
return 0;
new_factor = data->correction_factor[data->bucket]
* (DECAY - 1) / DECAY;
- if (data->expected_us > 0 && data->measured_us < MAX_INTERESTING)
+ if (data->expected_us > 0 && measured_us < MAX_INTERESTING)
new_factor += RESOLUTION * measured_us / data->expected_us;
else
/*
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <linux/cpu.h>
#include "cpuidle.h"
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
#include <asm/cacheflush.h>
#include <linux/rtnetlink.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
+#include <linux/gfp.h>
#include <crypto/ctr.h>
#include <crypto/des.h>
#include <linux/kthread.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include "mv_cesa.h"
/*
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/smp.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/processor.h>
#include <asm/i387.h>
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <crypto/algapi.h>
#include <crypto/aes.h>
#include <linux/notifier.h>
#include <linux/device.h>
#include <linux/dca.h>
+#include <linux/slab.h>
#define DCA_VERSION "1.12.1"
#include <linux/kdev_t.h>
#include <linux/err.h>
#include <linux/dca.h>
+#include <linux/gfp.h>
static struct class *dca_class;
static struct idr dca_idr;
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "at_hdmac_regs.h"
#include <linux/spinlock.h>
#include <linux/dmapool.h>
#include <linux/memory.h>
+#include <linux/gfp.h>
#include <mach/coh901318.h>
#include "coh901318_lli.h"
#include <linux/jiffies.h>
#include <linux/rculist.h>
#include <linux/idr.h>
+#include <linux/slab.h>
static DEFINE_MUTEX(dma_list_mutex);
static LIST_HEAD(dma_device_list);
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/wait.h>
static unsigned int test_buf_size = 16384;
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
*/
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
#include "registers.h"
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/dca.h>
+#include <linux/slab.h>
#include "dma.h"
#include "dma_v2.h"
#include "registers.h"
#include <linux/memory.h>
#include <linux/ioport.h>
#include <linux/raid/pq.h>
+#include <linux/slab.h>
#include <mach/adma.h>
#include <linux/dmaengine.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <net/tcp.h> /* for memcpy_toiovec */
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/proc_fs.h>
#include <linux/of.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/delay.h>
struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
struct sh_desc *desc;
struct sh_dmae_slave *param = chan->private;
+ int ret;
pm_runtime_get_sync(sh_chan->dev);
struct sh_dmae_slave_config *cfg;
cfg = sh_dmae_find_slave(sh_chan, param->slave_id);
- if (!cfg)
- return -EINVAL;
+ if (!cfg) {
+ ret = -EINVAL;
+ goto efindslave;
+ }
- if (test_and_set_bit(param->slave_id, sh_dmae_slave_used))
- return -EBUSY;
+ if (test_and_set_bit(param->slave_id, sh_dmae_slave_used)) {
+ ret = -EBUSY;
+ goto etestused;
+ }
param->config = cfg;
}
spin_unlock_bh(&sh_chan->desc_lock);
- if (!sh_chan->descs_allocated)
- pm_runtime_put(sh_chan->dev);
+ if (!sh_chan->descs_allocated) {
+ ret = -ENOMEM;
+ goto edescalloc;
+ }
return sh_chan->descs_allocated;
+
+edescalloc:
+ if (param)
+ clear_bit(param->slave_id, sh_dmae_slave_used);
+etestused:
+efindslave:
+ pm_runtime_put(sh_chan->dev);
+ return ret;
}
/*
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TXx9 DMA Controller driver");
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
+MODULE_ALIAS("platform:txx9dmac");
+MODULE_ALIAS("platform:txx9dmac-chan");
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/edac.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include "edac_core.h"
#include "edac_module.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/ctype.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "edac_core.h"
#include "edac_module.h"
*/
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/bug.h>
#include "edac_core.h"
void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
{
u32 ec = ERROR_CODE(regs->nbsl);
- u32 xec = EXT_ERROR_CODE(regs->nbsl);
if (!handle_errors)
return;
if (regs->nbsh & K8_NBSH_ERR_CPU_VAL)
pr_cont(", core: %u\n", (u8)(regs->nbsh & 0xf));
} else {
- pr_cont(", core: %d\n", fls((regs->nbsh & 0xf) - 1));
+ u8 assoc_cpus = regs->nbsh & 0xf;
+
+ if (assoc_cpus > 0)
+ pr_cont(", core: %d", fls(assoc_cpus) - 1);
+
+ pr_cont("\n");
}
- pr_emerg("%s.\n", EXT_ERR_MSG(xec));
+ pr_emerg("%s.\n", EXT_ERR_MSG(regs->nbsl));
if (BUS_ERROR(ec) && nb_bus_decoder)
nb_bus_decoder(node_id, regs);
((m->status & MCI_STATUS_PCC) ? "yes" : "no"));
/* do the two bits[14:13] together */
- ecc = m->status & (3ULL << 45);
+ ecc = (m->status >> 45) & 0x3;
if (ecc)
pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U"));
*/
#include <linux/module.h>
#include <linux/sysdev.h>
+#include <linux/slab.h>
#include <linux/ctype.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include <linux/io.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include <linux/delay.h>
#include <linux/mmzone.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
*/
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/io.h>
#include <linux/mod_devicetable.h>
#include <linux/edac.h>
#include <linux/smp.h>
+#include <linux/gfp.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/edac.h>
+#include <linux/gfp.h>
#include "edac_core.h"
#include "edac_module.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
-#include <linux/slab.h>
#include <linux/edac.h>
#include "edac_core.h"
#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/time.h>
u.packet.header_length = GET_HEADER_LENGTH(control);
if (ctx->type == FW_ISO_CONTEXT_TRANSMIT) {
+ if (u.packet.header_length % 4 != 0)
+ return -EINVAL;
header_length = u.packet.header_length;
} else {
/*
if (ctx->header_size == 0) {
if (u.packet.header_length > 0)
return -EINVAL;
- } else if (u.packet.header_length % ctx->header_size != 0) {
+ } else if (u.packet.header_length == 0 ||
+ u.packet.header_length % ctx->header_size != 0) {
return -EINVAL;
}
header_length = 0;
return -ENODEV;
if (_IOC_TYPE(cmd) != '#' ||
- _IOC_NR(cmd) >= ARRAY_SIZE(ioctl_handlers))
+ _IOC_NR(cmd) >= ARRAY_SIZE(ioctl_handlers) ||
+ _IOC_SIZE(cmd) > sizeof(buffer))
return -EINVAL;
- if (_IOC_DIR(cmd) & _IOC_WRITE) {
- if (_IOC_SIZE(cmd) > sizeof(buffer) ||
- copy_from_user(&buffer, arg, _IOC_SIZE(cmd)))
+ if (_IOC_DIR(cmd) == _IOC_READ)
+ memset(&buffer, 0, _IOC_SIZE(cmd));
+
+ if (_IOC_DIR(cmd) & _IOC_WRITE)
+ if (copy_from_user(&buffer, arg, _IOC_SIZE(cmd)))
return -EFAULT;
- }
ret = ioctl_handlers[_IOC_NR(cmd)](client, &buffer);
if (ret < 0)
return ret;
- if (_IOC_DIR(cmd) & _IOC_READ) {
- if (_IOC_SIZE(cmd) > sizeof(buffer) ||
- copy_to_user(arg, &buffer, _IOC_SIZE(cmd)))
+ if (_IOC_DIR(cmd) & _IOC_READ)
+ if (copy_to_user(arg, &buffer, _IOC_SIZE(cmd)))
return -EFAULT;
- }
return ret;
}
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/rwsem.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/workqueue.h>
}
EXPORT_SYMBOL(fw_csr_string);
-static bool is_fw_unit(struct device *dev);
-
-static int match_unit_directory(const u32 *directory, u32 match_flags,
- const struct ieee1394_device_id *id)
+static void get_ids(const u32 *directory, int *id)
{
struct fw_csr_iterator ci;
- int key, value, match;
+ int key, value;
- match = 0;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
- if (key == CSR_VENDOR && value == id->vendor_id)
- match |= IEEE1394_MATCH_VENDOR_ID;
- if (key == CSR_MODEL && value == id->model_id)
- match |= IEEE1394_MATCH_MODEL_ID;
- if (key == CSR_SPECIFIER_ID && value == id->specifier_id)
- match |= IEEE1394_MATCH_SPECIFIER_ID;
- if (key == CSR_VERSION && value == id->version)
- match |= IEEE1394_MATCH_VERSION;
+ switch (key) {
+ case CSR_VENDOR: id[0] = value; break;
+ case CSR_MODEL: id[1] = value; break;
+ case CSR_SPECIFIER_ID: id[2] = value; break;
+ case CSR_VERSION: id[3] = value; break;
+ }
}
+}
+
+static void get_modalias_ids(struct fw_unit *unit, int *id)
+{
+ get_ids(&fw_parent_device(unit)->config_rom[5], id);
+ get_ids(unit->directory, id);
+}
+
+static bool match_ids(const struct ieee1394_device_id *id_table, int *id)
+{
+ int match = 0;
+
+ if (id[0] == id_table->vendor_id)
+ match |= IEEE1394_MATCH_VENDOR_ID;
+ if (id[1] == id_table->model_id)
+ match |= IEEE1394_MATCH_MODEL_ID;
+ if (id[2] == id_table->specifier_id)
+ match |= IEEE1394_MATCH_SPECIFIER_ID;
+ if (id[3] == id_table->version)
+ match |= IEEE1394_MATCH_VERSION;
- return (match & match_flags) == match_flags;
+ return (match & id_table->match_flags) == id_table->match_flags;
}
+static bool is_fw_unit(struct device *dev);
+
static int fw_unit_match(struct device *dev, struct device_driver *drv)
{
- struct fw_unit *unit = fw_unit(dev);
- struct fw_device *device;
- const struct ieee1394_device_id *id;
+ const struct ieee1394_device_id *id_table =
+ container_of(drv, struct fw_driver, driver)->id_table;
+ int id[] = {0, 0, 0, 0};
/* We only allow binding to fw_units. */
if (!is_fw_unit(dev))
return 0;
- device = fw_parent_device(unit);
- id = container_of(drv, struct fw_driver, driver)->id_table;
+ get_modalias_ids(fw_unit(dev), id);
- for (; id->match_flags != 0; id++) {
- if (match_unit_directory(unit->directory, id->match_flags, id))
+ for (; id_table->match_flags != 0; id_table++)
+ if (match_ids(id_table, id))
return 1;
- /* Also check vendor ID in the root directory. */
- if ((id->match_flags & IEEE1394_MATCH_VENDOR_ID) &&
- match_unit_directory(&device->config_rom[5],
- IEEE1394_MATCH_VENDOR_ID, id) &&
- match_unit_directory(unit->directory, id->match_flags
- & ~IEEE1394_MATCH_VENDOR_ID, id))
- return 1;
- }
-
return 0;
}
static int get_modalias(struct fw_unit *unit, char *buffer, size_t buffer_size)
{
- struct fw_device *device = fw_parent_device(unit);
- struct fw_csr_iterator ci;
+ int id[] = {0, 0, 0, 0};
- int key, value;
- int vendor = 0;
- int model = 0;
- int specifier_id = 0;
- int version = 0;
-
- fw_csr_iterator_init(&ci, &device->config_rom[5]);
- while (fw_csr_iterator_next(&ci, &key, &value)) {
- switch (key) {
- case CSR_VENDOR:
- vendor = value;
- break;
- case CSR_MODEL:
- model = value;
- break;
- }
- }
-
- fw_csr_iterator_init(&ci, unit->directory);
- while (fw_csr_iterator_next(&ci, &key, &value)) {
- switch (key) {
- case CSR_SPECIFIER_ID:
- specifier_id = value;
- break;
- case CSR_VERSION:
- version = value;
- break;
- }
- }
+ get_modalias_ids(unit, id);
return snprintf(buffer, buffer_size,
"ieee1394:ven%08Xmo%08Xsp%08Xver%08X",
- vendor, model, specifier_id, version);
+ id[0], id[1], id[2], id[3]);
}
static int fw_unit_uevent(struct device *dev, struct kobj_uevent_env *env)
#include <linux/firewire-constants.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
for (try = 0; try < 5; try++) {
new = allocate ? old - bandwidth : old + bandwidth;
if (new < 0 || new > BANDWIDTH_AVAILABLE_INITIAL)
- break;
+ return -EBUSY;
data[0] = cpu_to_be32(old);
data[1] = cpu_to_be32(new);
u32 channels_mask, u64 offset, bool allocate, __be32 data[2])
{
__be32 c, all, old;
- int i, retry = 5;
+ int i, ret = -EIO, retry = 5;
old = all = allocate ? cpu_to_be32(~0) : 0;
if (!(channels_mask & 1 << i))
continue;
+ ret = -EBUSY;
+
c = cpu_to_be32(1 << (31 - i));
if ((old & c) != (all & c))
continue;
/* 1394-1995 IRM, fall through to retry. */
default:
- if (retry--)
+ if (retry) {
+ retry--;
i--;
+ } else {
+ ret = -EIO;
+ }
}
}
- return -EIO;
+ return ret;
}
static void deallocate_channel(struct fw_card *card, int irm_id,
if (ret < 0)
*bandwidth = 0;
- if (allocate && ret < 0 && c >= 0) {
- deallocate_channel(card, irm_id, generation, c, buffer);
+ if (allocate && ret < 0) {
+ if (c >= 0)
+ deallocate_channel(card, irm_id, generation, c, buffer);
*channel = ret;
}
}
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/unaligned.h>
#include <linux/dma-mapping.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
-#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
static char ohci_driver_name[] = KBUILD_MODNAME;
+#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
+
#define QUIRK_CYCLE_TIMER 1
#define QUIRK_RESET_PACKET 2
#define QUIRK_BE_HEADERS 4
static const struct {
unsigned short vendor, device, flags;
} ohci_quirks[] = {
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, QUIRK_CYCLE_TIMER |
+ QUIRK_RESET_PACKET},
{PCI_VENDOR_ID_TI, PCI_ANY_ID, QUIRK_RESET_PACKET},
{PCI_VENDOR_ID_AL, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
{PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
struct fw_packet *packet, u32 csr)
{
struct fw_packet response;
- int tcode, length, ext_tcode, sel;
+ int tcode, length, ext_tcode, sel, try;
__be32 *payload, lock_old;
u32 lock_arg, lock_data;
reg_write(ohci, OHCI1394_CSRCompareData, lock_arg);
reg_write(ohci, OHCI1394_CSRControl, sel);
- if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000)
- lock_old = cpu_to_be32(reg_read(ohci, OHCI1394_CSRData));
- else
- fw_notify("swap not done yet\n");
+ for (try = 0; try < 20; try++)
+ if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) {
+ lock_old = cpu_to_be32(reg_read(ohci,
+ OHCI1394_CSRData));
+ fw_fill_response(&response, packet->header,
+ RCODE_COMPLETE,
+ &lock_old, sizeof(lock_old));
+ goto out;
+ }
+
+ fw_error("swap not done (CSR lock timeout)\n");
+ fw_fill_response(&response, packet->header, RCODE_BUSY, NULL, 0);
- fw_fill_response(&response, packet->header,
- RCODE_COMPLETE, &lock_old, sizeof(lock_old));
out:
fw_core_handle_response(&ohci->card, &response);
}
static void handle_local_request(struct context *ctx, struct fw_packet *packet)
{
- u64 offset;
- u32 csr;
+ u64 offset, csr;
if (ctx == &ctx->ohci->at_request_ctx) {
packet->ack = ACK_PENDING;
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mc146818rtc.h>
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <linux/device.h>
+#include <linux/slab.h>
struct dmi_device_attribute{
struct device_attribute dev_attr;
#include <linux/dmi.h>
#include <linux/efi.h>
#include <linux/bootmem.h>
-#include <linux/slab.h>
#include <asm/dmi.h>
/*
#include <linux/sysfs.h>
#include <linux/kobject.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/limits.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/string.h>
#include <linux/types.h>
* Routine used to find the iSCSI Boot Format Table. The logical
* kernel address is set in the ibft_addr global variable.
*/
-void __init reserve_ibft_region(void)
+unsigned long __init find_ibft_region(unsigned long *sizep)
{
unsigned long pos;
unsigned int len = 0;
}
}
}
- if (ibft_addr)
- reserve_bootmem(pos, PAGE_ALIGN(len), BOOTMEM_DEFAULT);
+ if (ibft_addr) {
+ *sizep = PAGE_ALIGN(len);
+ return pos;
+ }
+
+ *sizep = 0;
+ return 0;
}
#include <linux/module.h>
#include <linux/types.h>
#include <linux/bootmem.h>
+#include <linux/slab.h>
/*
* Data types ------------------------------------------------------------------
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
/* Steal the hardware definitions from the bttv driver. */
#include "../media/video/bt8xx/bt848.h"
#include <linux/seq_file.h>
#include <linux/gpio.h>
#include <linux/idr.h>
+#include <linux/slab.h>
/* Optional implementation infrastructure for GPIO interfaces.
return 0;
free_sd:
- sysfs_put(pdesc->value_sd);
+ if (pdesc)
+ sysfs_put(pdesc->value_sd);
free_id:
idr_remove(&pdesc_idr, id);
desc->flags &= GPIO_FLAGS_MASK;
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
struct lnw_gpio_register {
u32 GPLR[2];
#include <linux/mutex.h>
#include <linux/i2c.h>
#include <linux/spi/max7301.h>
+#include <linux/slab.h>
static int max7300_i2c_write(struct device *dev, unsigned int reg,
unsigned int val)
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/max7301.h>
#include <linux/mutex.h>
#include <linux/spi/max7301.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
/*
* Pin configurations, see MAX7301 datasheet page 6
return ret;
}
EXPORT_SYMBOL_GPL(__max730x_remove);
+
+MODULE_AUTHOR("Juergen Beisert, Wolfram Sang");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MAX730x GPIO-Expanders, generic parts");
#include <linux/spi/spi.h>
#include <linux/spi/mc33880.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#define DRIVER_NAME "mc33880"
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/mcp23s08.h>
+#include <linux/slab.h>
/* Registers are all 8 bits wide.
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
+#include <linux/slab.h>
#ifdef CONFIG_OF_GPIO
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
static void pca953x_irq_bus_sync_unlock(unsigned int irq)
{
struct pca953x_chip *chip = get_irq_chip_data(irq);
+ uint16_t new_irqs;
+ uint16_t level;
+
+ /* Look for any newly setup interrupt */
+ new_irqs = chip->irq_trig_fall | chip->irq_trig_raise;
+ new_irqs &= ~chip->reg_direction;
+
+ while (new_irqs) {
+ level = __ffs(new_irqs);
+ pca953x_gpio_direction_input(&chip->gpio_chip, level);
+ new_irqs &= ~(1 << level);
+ }
mutex_unlock(&chip->irq_lock);
}
else
chip->irq_trig_raise &= ~mask;
- return pca953x_gpio_direction_input(&chip->gpio_chip, level);
+ return 0;
}
static struct irq_chip pca953x_irq_chip = {
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/slab.h>
#define GPIODIR 0x400
#define GPIOIS 0x404
gpiodir = readb(chip->base + GPIODIR);
gpiodir |= 1 << offset;
writeb(gpiodir, chip->base + GPIODIR);
+
+ /*
+ * gpio value is set again, because pl061 doesn't allow to set value of
+ * a gpio pin before configuring it in OUT mode.
+ */
+ writeb(!!value << offset, chip->base + (1 << (offset + 2)));
spin_unlock_irqrestore(&chip->lock, flags);
return 0;
gpioibe &= ~(1 << offset);
if (trigger & IRQ_TYPE_EDGE_RISING)
gpioiev |= 1 << offset;
- else
+ else if (trigger & IRQ_TYPE_EDGE_FALLING)
gpioiev &= ~(1 << offset);
}
writeb(gpioibe, chip->base + GPIOIBE);
static void pl061_irq_handler(unsigned irq, struct irq_desc *desc)
{
- struct list_head *chip_list = get_irq_chip_data(irq);
+ struct list_head *chip_list = get_irq_data(irq);
struct list_head *ptr;
struct pl061_gpio *chip;
goto iounmap;
}
INIT_LIST_HEAD(chip_list);
- set_irq_chip_data(irq, chip_list);
+ set_irq_data(irq, chip_list);
} else
- chip_list = get_irq_chip_data(irq);
+ chip_list = get_irq_data(irq);
list_add(&chip->list, chip_list);
for (i = 0; i < PL061_GPIO_NR; i++) {
#include <linux/io.h>
#include <linux/timb_gpio.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#define DRIVER_NAME "timb-gpio"
unsigned long flags;
u32 lvr, flr, bflr = 0;
u32 ver;
+ int ret = 0;
if (offset < 0 || offset > tgpio->gpio.ngpio)
return -EINVAL;
}
if ((trigger & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
- if (ver < 3)
- return -EINVAL;
+ if (ver < 3) {
+ ret = -EINVAL;
+ goto out;
+ }
else {
flr |= 1 << offset;
bflr |= 1 << offset;
iowrite32(bflr, tgpio->membase + TGPIO_BFLR);
iowrite32(1 << offset, tgpio->membase + TGPIO_ICR);
- spin_unlock_irqrestore(&tgpio->lock, flags);
- return 0;
+out:
+ spin_unlock_irqrestore(&tgpio->lock, flags);
+ return ret;
}
static void timbgpio_irq(unsigned int irq, struct irq_desc *desc)
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/i2c/twl.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/mfd/core.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
/* Register Offset Definitions */
#define XGPIO_DATA_OFFSET (0x0) /* Data register */
#include "drmP.h"
#include <linux/module.h>
+#include <linux/slab.h>
#if __OS_HAS_AGP
*/
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/log2.h>
#include <asm/shmparam.h>
#include "drmP.h"
* Jesse Barnes <jesse.barnes@intel.com>
*/
#include <linux/list.h>
+#include <linux/slab.h>
#include "drm.h"
#include "drmP.h"
#include "drm_crtc.h"
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("%s is disconnected\n",
drm_get_connector_name(connector));
+ drm_mode_connector_update_edid_property(connector, NULL);
goto prune;
}
#include <linux/debugfs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
#if defined(CONFIG_DEBUG_FS)
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
*/
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm_core.h"
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include "drmP.h"
/* Envision Peripherals, Inc. EN-7100e */
{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
+ /* Envision EN2028 */
+ { "EPI", 8232, EDID_QUIRK_PREFER_LARGE_60 },
/* Funai Electronics PM36B */
{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
mode->vsync_end = mode->vsync_start + vsync_pulse_width;
mode->vtotal = mode->vdisplay + vblank;
- /* perform the basic check for the detailed timing */
- if (mode->hsync_end > mode->htotal ||
- mode->vsync_end > mode->vtotal) {
- drm_mode_destroy(dev, mode);
- DRM_DEBUG_KMS("Incorrect detailed timing. "
- "Sync is beyond the blank.\n");
- return NULL;
- }
-
/* Some EDIDs have bogus h/vtotal values */
if (mode->hsync_end > mode->htotal)
mode->htotal = mode->hsync_end + 1;
*/
#include <linux/kernel.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/fb.h>
#include "drmP.h"
#include "drm_crtc.h"
.help_msg = "force-fb(V)",
.action_msg = "Restore framebuffer console",
};
+#else
+static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
#endif
static void drm_fb_helper_on(struct fb_info *info)
#include "drmP.h"
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
static int drm_open_helper(struct inode *inode, struct file *filp,
spin_unlock(&dev->count_lock);
}
out:
- mutex_lock(&dev->struct_mutex);
- if (minor->type == DRM_MINOR_LEGACY) {
- BUG_ON((dev->dev_mapping != NULL) &&
- (dev->dev_mapping != inode->i_mapping));
- if (dev->dev_mapping == NULL)
- dev->dev_mapping = inode->i_mapping;
+ if (!retcode) {
+ mutex_lock(&dev->struct_mutex);
+ if (minor->type == DRM_MINOR_LEGACY) {
+ if (dev->dev_mapping == NULL)
+ dev->dev_mapping = inode->i_mapping;
+ else if (dev->dev_mapping != inode->i_mapping)
+ retcode = -ENODEV;
+ }
+ mutex_unlock(&dev->struct_mutex);
}
- mutex_unlock(&dev->struct_mutex);
return retcode;
}
#include "drmP.h"
#include "drm_hashtab.h"
#include <linux/hash.h>
+#include <linux/slab.h>
int drm_ht_create(struct drm_open_hash *ht, unsigned int order)
{
#include "drmP.h"
#include <linux/interrupt.h> /* For task queue support */
+#include <linux/slab.h>
#include <linux/vgaarb.h>
/**
unsigned long irqflags;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ dev->driver->disable_vblank(dev, crtc);
DRM_WAKEUP(&dev->vbl_queue[crtc]);
dev->vblank_enabled[crtc] = 0;
dev->last_vblank[crtc] = dev->driver->get_vblank_counter(dev, crtc);
&& (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >=
(offset + size))
break;
- if (!agpmem)
+ if (&agpmem->head == &dev->agp->memory)
return NULL;
/*
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include "drmP.h"
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
/***************************************************
*/
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include "drmP.h"
#define DEBUG_SCATTER 0
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm_core.h"
}
driver = dev->driver;
- drm_vblank_cleanup(dev);
-
drm_lastclose(dev);
if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
dev->agp = NULL;
}
+ drm_vblank_cleanup(dev);
+
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
drm_rmmap(dev, r_list->map);
drm_ht_remove(&dev->map_hash);
#include <linux/device.h>
#include <linux/kdev_t.h>
+#include <linux/gfp.h>
#include <linux/err.h>
#include "drm_sysfs.h"
int drm_sysfs_connector_add(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- int ret = 0, i, j;
+ int attr_cnt = 0;
+ int opt_cnt = 0;
+ int i;
+ int ret = 0;
/* We shouldn't get called more than once for the same connector */
BUG_ON(device_is_registered(&connector->kdev));
/* Standard attributes */
- for (i = 0; i < ARRAY_SIZE(connector_attrs); i++) {
- ret = device_create_file(&connector->kdev, &connector_attrs[i]);
+ for (attr_cnt = 0; attr_cnt < ARRAY_SIZE(connector_attrs); attr_cnt++) {
+ ret = device_create_file(&connector->kdev, &connector_attrs[attr_cnt]);
if (ret)
goto err_out_files;
}
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Component:
case DRM_MODE_CONNECTOR_TV:
- for (i = 0; i < ARRAY_SIZE(connector_attrs_opt1); i++) {
- ret = device_create_file(&connector->kdev, &connector_attrs_opt1[i]);
+ for (opt_cnt = 0; opt_cnt < ARRAY_SIZE(connector_attrs_opt1); opt_cnt++) {
+ ret = device_create_file(&connector->kdev, &connector_attrs_opt1[opt_cnt]);
if (ret)
goto err_out_files;
}
return 0;
err_out_files:
- if (i > 0)
- for (j = 0; j < i; j++)
- device_remove_file(&connector->kdev,
- &connector_attrs[i]);
+ for (i = 0; i < opt_cnt; i++)
+ device_remove_file(&connector->kdev, &connector_attrs_opt1[i]);
+ for (i = 0; i < attr_cnt; i++)
+ device_remove_file(&connector->kdev, &connector_attrs[i]);
device_unregister(&connector->kdev);
out:
#include "drmP.h"
#if defined(__ia64__)
#include <linux/efi.h>
+#include <linux/slab.h>
#endif
static void drm_vm_open(struct vm_area_struct *vma);
#include "i810_drv.h"
#include <linux/interrupt.h> /* For task queue support */
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#define I810_BUF_FREE 2
#include <linux/interrupt.h> /* For task queue support */
#include <linux/pagemap.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#define I830_BUF_FREE 2
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
} else {
struct drm_i915_gem_object *obj_priv;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
seq_printf(m, "Fenced object[%2d] = %p: %s "
"%08x %08zx %08x %s %08x %08x %d",
i, obj, get_pin_flag(obj_priv),
#include <linux/acpi.h>
#include <linux/pnp.h>
#include <linux/vga_switcheroo.h>
+#include <linux/slab.h>
/* Really want an OS-independent resettable timer. Would like to have
* this loop run for (eg) 3 sec, but have the timer reset every time
dev_priv->cfb_size = size;
+ dev_priv->compressed_fb = compressed_fb;
+
if (IS_GM45(dev)) {
g4x_disable_fbc(dev);
I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
i8xx_disable_fbc(dev);
I915_WRITE(FBC_CFB_BASE, cfb_base);
I915_WRITE(FBC_LL_BASE, ll_base);
+ dev_priv->compressed_llb = compressed_llb;
}
DRM_DEBUG("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
ll_base, size >> 20);
}
+static void i915_cleanup_compression(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ drm_mm_put_block(dev_priv->compressed_fb);
+ if (!IS_GM45(dev))
+ drm_mm_put_block(dev_priv->compressed_llb);
+}
+
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
mutex_lock(&dev->struct_mutex);
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
+ if (I915_HAS_FBC(dev) && i915_powersave)
+ i915_cleanup_compression(dev);
drm_mm_takedown(&dev_priv->vram);
i915_gem_lastclose(dev);
DRM_IOCTL_DEF(DRM_I915_GET_VBLANK_PIPE, i915_vblank_pipe_get, DRM_AUTH ),
DRM_IOCTL_DEF(DRM_I915_VBLANK_SWAP, i915_vblank_swap, DRM_AUTH),
DRM_IOCTL_DEF(DRM_I915_HWS_ADDR, i915_set_status_page, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH),
- DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH),
- DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH),
- DRM_IOCTL_DEF(DRM_I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH),
- DRM_IOCTL_DEF(DRM_I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
- DRM_IOCTL_DEF(DRM_I915_GEM_CREATE, i915_gem_create_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_PREAD, i915_gem_pread_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_PWRITE, i915_gem_pwrite_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_MMAP, i915_gem_mmap_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
- DRM_IOCTL_DEF(DRM_I915_GEM_MADVISE, i915_gem_madvise_ioctl, 0),
- DRM_IOCTL_DEF(DRM_I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF(DRM_I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW),
+ DRM_IOCTL_DEF(DRM_I915_GEM_INIT, i915_gem_init_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER, i915_gem_execbuffer, DRM_AUTH|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_EXECBUFFER2, i915_gem_execbuffer2, DRM_AUTH|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_PIN, i915_gem_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_UNPIN, i915_gem_unpin_ioctl, DRM_AUTH|DRM_ROOT_ONLY|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_ENTERVT, i915_gem_entervt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_LEAVEVT, i915_gem_leavevt_ioctl, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_CREATE, i915_gem_create_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_I915_OVERLAY_ATTRS, intel_overlay_attrs, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
};
const static struct intel_device_info intel_i85x_info = {
- .is_i8xx = 1, .is_mobile = 1, .cursor_needs_physical = 1,
+ .is_i8xx = 1, .is_i85x = 1, .is_mobile = 1,
+ .cursor_needs_physical = 1,
};
const static struct intel_device_info intel_i865g_info = {
.is_i915g = 1, .is_i9xx = 1, .cursor_needs_physical = 1,
};
const static struct intel_device_info intel_i915gm_info = {
- .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .is_i9xx = 1, .is_mobile = 1,
.cursor_needs_physical = 1,
};
const static struct intel_device_info intel_i945g_info = {
.is_i9xx = 1, .has_hotplug = 1, .cursor_needs_physical = 1,
};
const static struct intel_device_info intel_i945gm_info = {
- .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1, .has_fbc = 1,
+ .is_i945gm = 1, .is_i9xx = 1, .is_mobile = 1,
.has_hotplug = 1, .cursor_needs_physical = 1,
};
const static struct intel_device_info intel_sandybridge_d_info = {
.is_i965g = 1, .is_i9xx = 1, .need_gfx_hws = 1,
- .has_hotplug = 1,
+ .has_hotplug = 1, .is_gen6 = 1,
};
const static struct intel_device_info intel_sandybridge_m_info = {
.is_i965g = 1, .is_mobile = 1, .is_i9xx = 1, .need_gfx_hws = 1,
- .has_hotplug = 1,
+ .has_hotplug = 1, .is_gen6 = 1,
};
const static struct pci_device_id pciidlist[] = {
INTEL_VGA_DEVICE(0x3577, &intel_i830_info),
INTEL_VGA_DEVICE(0x2562, &intel_845g_info),
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info),
- INTEL_VGA_DEVICE(0x35e8, &intel_i85x_info),
+ INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
INTEL_VGA_DEVICE(0x2572, &intel_i865g_info),
INTEL_VGA_DEVICE(0x2582, &intel_i915g_info),
INTEL_VGA_DEVICE(0x258a, &intel_i915g_info),
!dev_priv->mm.suspended) {
drm_i915_ring_buffer_t *ring = &dev_priv->ring;
struct drm_gem_object *obj = ring->ring_obj;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
dev_priv->mm.suspended = 0;
/* Stop the ring if it's running. */
struct intel_device_info {
u8 is_mobile : 1;
u8 is_i8xx : 1;
+ u8 is_i85x : 1;
u8 is_i915g : 1;
u8 is_i9xx : 1;
u8 is_i945gm : 1;
u8 is_g4x : 1;
u8 is_pineview : 1;
u8 is_ironlake : 1;
+ u8 is_gen6 : 1;
u8 has_fbc : 1;
u8 has_rc6 : 1;
u8 has_pipe_cxsr : 1;
drm_dma_handle_t *status_page_dmah;
void *hw_status_page;
+ void *seqno_page;
dma_addr_t dma_status_page;
uint32_t counter;
unsigned int status_gfx_addr;
+ unsigned int seqno_gfx_addr;
drm_local_map_t hws_map;
struct drm_gem_object *hws_obj;
+ struct drm_gem_object *seqno_obj;
struct drm_gem_object *pwrctx;
struct resource mch_res;
/* Reclocking support */
bool render_reclock_avail;
bool lvds_downclock_avail;
+ /* indicate whether the LVDS EDID is OK */
+ bool lvds_edid_good;
/* indicates the reduced downclock for LVDS*/
int lvds_downclock;
struct work_struct idle_work;
u8 max_delay;
enum no_fbc_reason no_fbc_reason;
+
+ struct drm_mm_node *compressed_fb;
+ struct drm_mm_node *compressed_llb;
} drm_i915_private_t;
/** driver private structure attached to each drm_gem_object */
atomic_t pending_flip;
};
+#define to_intel_bo(x) ((struct drm_i915_gem_object *) (x)->driver_private)
+
/**
* Request queue structure.
*
#define IS_I830(dev) ((dev)->pci_device == 0x3577)
#define IS_845G(dev) ((dev)->pci_device == 0x2562)
-#define IS_I85X(dev) ((dev)->pci_device == 0x3582)
+#define IS_I85X(dev) (INTEL_INFO(dev)->is_i85x)
#define IS_I865G(dev) ((dev)->pci_device == 0x2572)
#define IS_GEN2(dev) (INTEL_INFO(dev)->is_i8xx)
#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
#define IS_IRONLAKE_M(dev) ((dev)->pci_device == 0x0046)
#define IS_IRONLAKE(dev) (INTEL_INFO(dev)->is_ironlake)
#define IS_I9XX(dev) (INTEL_INFO(dev)->is_i9xx)
+#define IS_GEN6(dev) (INTEL_INFO(dev)->is_gen6)
#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
#define IS_GEN3(dev) (IS_I915G(dev) || \
#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
-#define IS_GEN6(dev) ((dev)->pci_device == 0x0102)
-
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
*/
#define HAS_PCH_SPLIT(dev) (IS_IRONLAKE(dev) || \
IS_GEN6(dev))
+#define HAS_PIPE_CONTROL(dev) (IS_IRONLAKE(dev) || IS_GEN6(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
+#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/pci.h>
static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj)
{
drm_i915_private_t *dev_priv = obj->dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
obj_priv->tiling_mode != I915_TILING_NONE;
struct drm_i915_gem_pread *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
ssize_t remain;
loff_t offset, page_base;
char __user *user_data;
if (ret != 0)
goto fail_put_pages;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
offset = args->offset;
while (remain > 0) {
struct drm_i915_gem_pread *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct mm_struct *mm = current->mm;
struct page **user_pages;
ssize_t remain;
if (ret != 0)
goto fail_put_pages;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
offset = args->offset;
while (remain > 0) {
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EBADF;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
/* Bounds check source.
*
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
drm_i915_private_t *dev_priv = dev->dev_private;
ssize_t remain;
loff_t offset, page_base;
if (ret)
goto fail;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
offset = obj_priv->gtt_offset + args->offset;
while (remain > 0) {
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
drm_i915_private_t *dev_priv = dev->dev_private;
ssize_t remain;
loff_t gtt_page_base, offset;
if (ret)
goto out_unpin_object;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
offset = obj_priv->gtt_offset + args->offset;
while (remain > 0) {
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
ssize_t remain;
loff_t offset, page_base;
char __user *user_data;
if (ret != 0)
goto fail_put_pages;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
offset = args->offset;
obj_priv->dirty = 1;
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct mm_struct *mm = current->mm;
struct page **user_pages;
ssize_t remain;
if (ret != 0)
goto fail_put_pages;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
offset = args->offset;
obj_priv->dirty = 1;
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EBADF;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
/* Bounds check destination.
*
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EBADF;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
mutex_lock(&dev->struct_mutex);
DRM_INFO("%s: sw_finish %d (%p %zd)\n",
__func__, args->handle, obj, obj->size);
#endif
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
/* Pinned buffers may be scanout, so flush the cache */
if (obj_priv->pin_count)
struct drm_gem_object *obj = vma->vm_private_data;
struct drm_device *dev = obj->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
pgoff_t page_offset;
unsigned long pfn;
int ret = 0;
{
struct drm_device *dev = obj->dev;
struct drm_gem_mm *mm = dev->mm_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct drm_map_list *list;
struct drm_local_map *map;
int ret = 0;
i915_gem_release_mmap(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
if (dev->dev_mapping)
unmap_mapping_range(dev->dev_mapping,
i915_gem_free_mmap_offset(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct drm_gem_mm *mm = dev->mm_private;
struct drm_map_list *list;
i915_gem_get_gtt_alignment(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int start, i;
/*
mutex_lock(&dev->struct_mutex);
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (obj_priv->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to mmap a purgeable buffer\n");
void
i915_gem_object_put_pages(struct drm_gem_object *obj)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int page_count = obj->size / PAGE_SIZE;
int i;
obj_priv->dirty = 0;
for (i = 0; i < page_count; i++) {
- if (obj_priv->pages[i] == NULL)
- break;
-
if (obj_priv->dirty)
set_page_dirty(obj_priv->pages[i]);
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
/* Add a reference if we're newly entering the active list. */
if (!obj_priv->active) {
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
BUG_ON(!obj_priv->active);
list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list);
static void
i915_gem_object_truncate(struct drm_gem_object *obj)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct inode *inode;
inode = obj->filp->f_path.dentry->d_inode;
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
i915_verify_inactive(dev, __FILE__, __LINE__);
if (obj_priv->pin_count != 0)
}
}
+#define PIPE_CONTROL_FLUSH(addr) \
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE | \
+ PIPE_CONTROL_DEPTH_STALL); \
+ OUT_RING(addr | PIPE_CONTROL_GLOBAL_GTT); \
+ OUT_RING(0); \
+ OUT_RING(0); \
+
/**
* Creates a new sequence number, emitting a write of it to the status page
* plus an interrupt, which will trigger i915_user_interrupt_handler.
if (dev_priv->mm.next_gem_seqno == 0)
dev_priv->mm.next_gem_seqno++;
- BEGIN_LP_RING(4);
- OUT_RING(MI_STORE_DWORD_INDEX);
- OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
- OUT_RING(seqno);
+ if (HAS_PIPE_CONTROL(dev)) {
+ u32 scratch_addr = dev_priv->seqno_gfx_addr + 128;
- OUT_RING(MI_USER_INTERRUPT);
- ADVANCE_LP_RING();
+ /*
+ * Workaround qword write incoherence by flushing the
+ * PIPE_NOTIFY buffers out to memory before requesting
+ * an interrupt.
+ */
+ BEGIN_LP_RING(32);
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128; /* write to separate cachelines */
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ scratch_addr += 128;
+ PIPE_CONTROL_FLUSH(scratch_addr);
+ OUT_RING(GFX_OP_PIPE_CONTROL | PIPE_CONTROL_QW_WRITE |
+ PIPE_CONTROL_WC_FLUSH | PIPE_CONTROL_TC_FLUSH |
+ PIPE_CONTROL_NOTIFY);
+ OUT_RING(dev_priv->seqno_gfx_addr | PIPE_CONTROL_GLOBAL_GTT);
+ OUT_RING(seqno);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ } else {
+ BEGIN_LP_RING(4);
+ OUT_RING(MI_STORE_DWORD_INDEX);
+ OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+ OUT_RING(seqno);
+
+ OUT_RING(MI_USER_INTERRUPT);
+ ADVANCE_LP_RING();
+ }
DRM_DEBUG_DRIVER("%d\n", seqno);
{
drm_i915_private_t *dev_priv = dev->dev_private;
- return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
+ if (HAS_PIPE_CONTROL(dev))
+ return ((volatile u32 *)(dev_priv->seqno_page))[0];
+ else
+ return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX);
}
/**
i915_gem_object_wait_rendering(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int ret;
/* This function only exists to support waiting for existing rendering,
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int ret = 0;
#if WATCH_BUF
#if WATCH_LRU
DRM_INFO("%s: evicting %p\n", __func__, obj);
#endif
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
BUG_ON(obj_priv->pin_count != 0);
BUG_ON(obj_priv->active);
seqno = i915_add_request(dev, NULL, obj->write_domain);
if (seqno == 0)
return -ENOMEM;
-
- ret = i915_wait_request(dev, seqno);
- if (ret)
- return ret;
-
continue;
}
}
i915_gem_object_get_pages(struct drm_gem_object *obj,
gfp_t gfpmask)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int page_count, i;
struct address_space *mapping;
struct inode *inode;
struct page *page;
- int ret;
if (obj_priv->pages_refcount++ != 0)
return 0;
mapping_gfp_mask (mapping) |
__GFP_COLD |
gfpmask);
- if (IS_ERR(page)) {
- ret = PTR_ERR(page);
- i915_gem_object_put_pages(obj);
- return ret;
- }
+ if (IS_ERR(page))
+ goto err_pages;
+
obj_priv->pages[i] = page;
}
i915_gem_object_do_bit_17_swizzle(obj);
return 0;
+
+err_pages:
+ while (i--)
+ page_cache_release(obj_priv->pages[i]);
+
+ drm_free_large(obj_priv->pages);
+ obj_priv->pages = NULL;
+ obj_priv->pages_refcount--;
+ return PTR_ERR(page);
}
static void sandybridge_write_fence_reg(struct drm_i915_fence_reg *reg)
struct drm_gem_object *obj = reg->obj;
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int regnum = obj_priv->fence_reg;
uint64_t val;
struct drm_gem_object *obj = reg->obj;
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int regnum = obj_priv->fence_reg;
uint64_t val;
struct drm_gem_object *obj = reg->obj;
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int regnum = obj_priv->fence_reg;
int tile_width;
uint32_t fence_reg, val;
pitch_val = obj_priv->stride / tile_width;
pitch_val = ffs(pitch_val) - 1;
+ if (obj_priv->tiling_mode == I915_TILING_Y &&
+ HAS_128_BYTE_Y_TILING(dev))
+ WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+ else
+ WARN_ON(pitch_val > I915_FENCE_MAX_PITCH_VAL);
+
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
struct drm_gem_object *obj = reg->obj;
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int regnum = obj_priv->fence_reg;
uint32_t val;
uint32_t pitch_val;
if (!reg->obj)
return i;
- obj_priv = reg->obj->driver_private;
+ obj_priv = to_intel_bo(reg->obj);
if (!obj_priv->pin_count)
avail++;
}
{
struct drm_device *dev = obj->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct drm_i915_fence_reg *reg = NULL;
int ret;
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
if (IS_GEN6(dev)) {
I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 +
i915_gem_object_put_fence_reg(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
if (obj_priv->fence_reg == I915_FENCE_REG_NONE)
return 0;
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
struct drm_mm_node *free_space;
gfp_t gfpmask = __GFP_NORETRY | __GFP_NOWARN;
int ret;
void
i915_gem_clflush_object(struct drm_gem_object *obj)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
/* If we don't have a page list set up, then we're not pinned
* to GPU, and we can ignore the cache flush because it'll happen
int
i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
uint32_t old_write_domain, old_read_domains;
int ret;
i915_gem_object_set_to_display_plane(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
uint32_t old_write_domain, old_read_domains;
int ret;
i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
uint32_t old_read_domains;
static void
i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
if (!obj_priv->page_cpu_valid)
return;
i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
uint64_t offset, uint64_t size)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
uint32_t old_read_domains;
int i, ret;
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int i, ret;
void __iomem *reloc_page;
bool need_fence;
i915_gem_object_unpin(obj);
return -EBADF;
}
- target_obj_priv = target_obj->driver_private;
+ target_obj_priv = to_intel_bo(target_obj);
#if WATCH_RELOC
DRM_INFO("%s: obj %p offset %08x target %d "
prepare_to_wait(&dev_priv->pending_flip_queue,
&wait, TASK_INTERRUPTIBLE);
for (i = 0; i < count; i++) {
- obj_priv = object_list[i]->driver_private;
+ obj_priv = to_intel_bo(object_list[i]);
if (atomic_read(&obj_priv->pending_flip) > 0)
break;
}
goto err;
}
- obj_priv = object_list[i]->driver_private;
+ obj_priv = to_intel_bo(object_list[i]);
if (obj_priv->in_execbuffer) {
DRM_ERROR("Object %p appears more than once in object list\n",
object_list[i]);
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
uint32_t old_write_domain = obj->write_domain;
obj->write_domain = obj->pending_write_domain;
for (i = 0; i < args->buffer_count; i++) {
if (object_list[i]) {
- obj_priv = object_list[i]->driver_private;
+ obj_priv = to_intel_bo(object_list[i]);
obj_priv->in_execbuffer = false;
}
drm_gem_object_unreference(object_list[i]);
i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int ret;
i915_verify_inactive(dev, __FILE__, __LINE__);
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
i915_verify_inactive(dev, __FILE__, __LINE__);
obj_priv->pin_count--;
mutex_unlock(&dev->struct_mutex);
return -EBADF;
}
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (obj_priv->madv != I915_MADV_WILLNEED) {
DRM_ERROR("Attempting to pin a purgeable buffer\n");
return -EBADF;
}
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (obj_priv->pin_filp != file_priv) {
DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n",
args->handle);
*/
i915_gem_retire_requests(dev);
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
/* Don't count being on the flushing list against the object being
* done. Otherwise, a buffer left on the flushing list but not getting
* flushed (because nobody's flushing that domain) won't ever return
}
mutex_lock(&dev->struct_mutex);
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (obj_priv->pin_count) {
drm_gem_object_unreference(obj);
void i915_gem_free_object(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
trace_i915_gem_object_destroy(obj);
return 0;
}
+/*
+ * 965+ support PIPE_CONTROL commands, which provide finer grained control
+ * over cache flushing.
+ */
+static int
+i915_gem_init_pipe_control(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+ int ret;
+
+ obj = drm_gem_object_alloc(dev, 4096);
+ if (obj == NULL) {
+ DRM_ERROR("Failed to allocate seqno page\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+ obj_priv = to_intel_bo(obj);
+ obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
+
+ ret = i915_gem_object_pin(obj, 4096);
+ if (ret)
+ goto err_unref;
+
+ dev_priv->seqno_gfx_addr = obj_priv->gtt_offset;
+ dev_priv->seqno_page = kmap(obj_priv->pages[0]);
+ if (dev_priv->seqno_page == NULL)
+ goto err_unpin;
+
+ dev_priv->seqno_obj = obj;
+ memset(dev_priv->seqno_page, 0, PAGE_SIZE);
+
+ return 0;
+
+err_unpin:
+ i915_gem_object_unpin(obj);
+err_unref:
+ drm_gem_object_unreference(obj);
+err:
+ return ret;
+}
+
static int
i915_gem_init_hws(struct drm_device *dev)
{
obj = drm_gem_object_alloc(dev, 4096);
if (obj == NULL) {
DRM_ERROR("Failed to allocate status page\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err;
}
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
obj_priv->agp_type = AGP_USER_CACHED_MEMORY;
ret = i915_gem_object_pin(obj, 4096);
if (ret != 0) {
drm_gem_object_unreference(obj);
- return ret;
+ goto err_unref;
}
dev_priv->status_gfx_addr = obj_priv->gtt_offset;
if (dev_priv->hw_status_page == NULL) {
DRM_ERROR("Failed to map status page.\n");
memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
- i915_gem_object_unpin(obj);
- drm_gem_object_unreference(obj);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_unpin;
+ }
+
+ if (HAS_PIPE_CONTROL(dev)) {
+ ret = i915_gem_init_pipe_control(dev);
+ if (ret)
+ goto err_unpin;
}
+
dev_priv->hws_obj = obj;
memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
if (IS_GEN6(dev)) {
DRM_DEBUG_DRIVER("hws offset: 0x%08x\n", dev_priv->status_gfx_addr);
return 0;
+
+err_unpin:
+ i915_gem_object_unpin(obj);
+err_unref:
+ drm_gem_object_unreference(obj);
+err:
+ return 0;
+}
+
+static void
+i915_gem_cleanup_pipe_control(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+
+ obj = dev_priv->seqno_obj;
+ obj_priv = to_intel_bo(obj);
+ kunmap(obj_priv->pages[0]);
+ i915_gem_object_unpin(obj);
+ drm_gem_object_unreference(obj);
+ dev_priv->seqno_obj = NULL;
+
+ dev_priv->seqno_page = NULL;
}
static void
return;
obj = dev_priv->hws_obj;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
kunmap(obj_priv->pages[0]);
i915_gem_object_unpin(obj);
memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map));
dev_priv->hw_status_page = NULL;
+ if (HAS_PIPE_CONTROL(dev))
+ i915_gem_cleanup_pipe_control(dev);
+
/* Write high address into HWS_PGA when disabling. */
I915_WRITE(HWS_PGA, 0x1ffff000);
}
i915_gem_cleanup_hws(dev);
return -ENOMEM;
}
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
ret = i915_gem_object_pin(obj, 4096);
if (ret != 0) {
ring->space += ring->Size;
}
+ if (IS_I9XX(dev) && !IS_GEN3(dev)) {
+ I915_WRITE(MI_MODE,
+ (VS_TIMER_DISPATCH) << 16 | VS_TIMER_DISPATCH);
+ }
+
return 0;
}
int ret;
int page_count;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (!obj_priv->phys_obj)
return;
if (id > I915_MAX_PHYS_OBJECT)
return -EINVAL;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (obj_priv->phys_obj) {
if (obj_priv->phys_obj->id == id)
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
void *obj_addr;
int ret;
char __user *user_data;
i915_gem_dump_object(struct drm_gem_object *obj, int len,
const char *where, uint32_t mark)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int page;
DRM_INFO("%s: object at offset %08x\n", where, obj_priv->gtt_offset);
i915_gem_object_check_coherency(struct drm_gem_object *obj, int handle)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int page;
uint32_t *gtt_mapping;
uint32_t *backing_map = NULL;
* reg, so dont bother to check the size */
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
- } else if (IS_I9XX(dev)) {
- uint32_t pitch_val = ffs(stride / tile_width) - 1;
-
- /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
- * instead of 4 (2KB) on 945s.
- */
- if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
- size > (I830_FENCE_MAX_SIZE_VAL << 20))
+ } else if (IS_GEN3(dev) || IS_GEN2(dev)) {
+ if (stride > 8192)
return false;
- } else {
- uint32_t pitch_val = ffs(stride / tile_width) - 1;
- if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
- size > (I830_FENCE_MAX_SIZE_VAL << 19))
- return false;
+ if (IS_GEN3(dev)) {
+ if (size > I830_FENCE_MAX_SIZE_VAL << 20)
+ return false;
+ } else {
+ if (size > I830_FENCE_MAX_SIZE_VAL << 19)
+ return false;
+ }
}
/* 965+ just needs multiples of tile width */
i915_gem_object_fence_offset_ok(struct drm_gem_object *obj, int tiling_mode)
{
struct drm_device *dev = obj->dev;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
if (obj_priv->gtt_space == NULL)
return true;
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EINVAL;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
if (!i915_tiling_ok(dev, args->stride, obj->size, args->tiling_mode)) {
drm_gem_object_unreference_unlocked(obj);
* need to ensure that any fence register is cleared.
*/
if (!i915_gem_object_fence_offset_ok(obj, args->tiling_mode))
- ret = i915_gem_object_unbind(obj);
+ ret = i915_gem_object_unbind(obj);
+ else if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+ ret = i915_gem_object_put_fence_reg(obj);
else
- ret = i915_gem_object_put_fence_reg(obj);
+ i915_gem_release_mmap(obj);
+
if (ret != 0) {
WARN(ret != -ERESTARTSYS,
"failed to reset object for tiling switch");
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EINVAL;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
mutex_lock(&dev->struct_mutex);
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int page_count = obj->size >> PAGE_SHIFT;
int i;
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
int page_count = obj->size >> PAGE_SHIFT;
int i;
*/
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
if (mode_config->num_connector) {
list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- if (intel_output->hot_plug)
- (*intel_output->hot_plug) (intel_output);
+ if (intel_encoder->hot_plug)
+ (*intel_encoder->hot_plug) (intel_encoder);
}
}
/* Just fire off a uevent and let userspace tell us what to do */
READ_BREADCRUMB(dev_priv);
}
- if (gt_iir & GT_USER_INTERRUPT) {
+ if (gt_iir & GT_PIPE_NOTIFY) {
u32 seqno = i915_get_gem_seqno(dev);
dev_priv->mm.irq_gem_seqno = seqno;
trace_i915_gem_request_complete(dev, seqno);
if (src == NULL)
return NULL;
- src_priv = src->driver_private;
+ src_priv = to_intel_bo(src);
if (src_priv->pages == NULL)
return NULL;
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) {
if (HAS_PCH_SPLIT(dev))
- ironlake_enable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+ ironlake_enable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
else
i915_enable_irq(dev_priv, I915_USER_INTERRUPT);
}
BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0);
if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
if (HAS_PCH_SPLIT(dev))
- ironlake_disable_graphics_irq(dev_priv, GT_USER_INTERRUPT);
+ ironlake_disable_graphics_irq(dev_priv, GT_PIPE_NOTIFY);
else
i915_disable_irq(dev_priv, I915_USER_INTERRUPT);
}
/* enable kind of interrupts always enabled */
u32 display_mask = DE_MASTER_IRQ_CONTROL | DE_GSE | DE_PCH_EVENT |
DE_PLANEA_FLIP_DONE | DE_PLANEB_FLIP_DONE;
- u32 render_mask = GT_USER_INTERRUPT;
+ u32 render_mask = GT_PIPE_NOTIFY;
u32 hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG |
SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
struct drm_connector *connector;
+ acpi_handle handle;
+ struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
+ unsigned long long device_id;
+ acpi_status status;
int i = 0;
+ handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &acpi_dev)))
+ return;
+
+ if (acpi_is_video_device(acpi_dev))
+ acpi_video_bus = acpi_dev;
+ else {
+ list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
+ if (acpi_is_video_device(acpi_cdev)) {
+ acpi_video_bus = acpi_cdev;
+ break;
+ }
+ }
+ }
+
+ if (!acpi_video_bus) {
+ printk(KERN_WARNING "No ACPI video bus found\n");
+ return;
+ }
+
+ list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
+ if (i >= 8) {
+ dev_printk (KERN_ERR, &dev->pdev->dev,
+ "More than 8 outputs detected\n");
+ return;
+ }
+ status =
+ acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
+ NULL, &device_id);
+ if (ACPI_SUCCESS(status)) {
+ if (!device_id)
+ goto blind_set;
+ opregion->acpi->didl[i] = (u32)(device_id & 0x0f0f);
+ i++;
+ }
+ }
+
+end:
+ /* If fewer than 8 outputs, the list must be null terminated */
+ if (i < 8)
+ opregion->acpi->didl[i] = 0;
+ return;
+
+blind_set:
+ i = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
int output_type = ACPI_OTHER_OUTPUT;
if (i >= 8) {
opregion->acpi->didl[i] |= (1<<31) | output_type | i;
i++;
}
-
- /* If fewer than 8 outputs, the list must be null terminated */
- if (i < 8)
- opregion->acpi->didl[i] = 0;
+ goto end;
}
int intel_opregion_init(struct drm_device *dev, int resume)
#define ASYNC_FLIP (1<<22)
#define DISPLAY_PLANE_A (0<<20)
#define DISPLAY_PLANE_B (1<<20)
+#define GFX_OP_PIPE_CONTROL ((0x3<<29)|(0x3<<27)|(0x2<<24)|2)
+#define PIPE_CONTROL_QW_WRITE (1<<14)
+#define PIPE_CONTROL_DEPTH_STALL (1<<13)
+#define PIPE_CONTROL_WC_FLUSH (1<<12)
+#define PIPE_CONTROL_IS_FLUSH (1<<11) /* MBZ on Ironlake */
+#define PIPE_CONTROL_TC_FLUSH (1<<10) /* GM45+ only */
+#define PIPE_CONTROL_ISP_DIS (1<<9)
+#define PIPE_CONTROL_NOTIFY (1<<8)
+#define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */
+#define PIPE_CONTROL_STALL_EN (1<<1) /* in addr word, Ironlake+ only */
/*
* Fence registers
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 4
#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define INSTDONE 0x02090
#define NOPID 0x02094
#define HWSTAM 0x02098
+
+#define MI_MODE 0x0209c
+# define VS_TIMER_DISPATCH (1 << 6)
+
#define SCPD0 0x0209c /* 915+ only */
#define IER 0x020a0
#define IIR 0x020a4
#define FBC_CTL_PERIODIC (1<<30)
#define FBC_CTL_INTERVAL_SHIFT (16)
#define FBC_CTL_UNCOMPRESSIBLE (1<<14)
-#define FBC_C3_IDLE (1<<13)
+#define FBC_CTL_C3_IDLE (1<<13)
#define FBC_CTL_STRIDE_SHIFT (5)
#define FBC_CTL_FENCENO (1<<0)
#define FBC_COMMAND 0x0320c
#define DISPLAY_PORT_PLL_BIOS_1 0x46010
#define DISPLAY_PORT_PLL_BIOS_2 0x46014
+#define PCH_DSPCLK_GATE_D 0x42020
+# define DPFDUNIT_CLOCK_GATE_DISABLE (1 << 7)
+# define DPARBUNIT_CLOCK_GATE_DISABLE (1 << 5)
+
+#define PCH_3DCGDIS0 0x46020
+# define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18)
+# define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1)
+
#define FDI_PLL_FREQ_CTL 0x46030
#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24)
#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00
#define DEIER 0x4400c
/* GT interrupt */
+#define GT_PIPE_NOTIFY (1 << 4)
#define GT_SYNC_STATUS (1 << 2)
#define GT_USER_INTERRUPT (1 << 0)
edp = find_section(bdb, BDB_EDP);
if (!edp) {
if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp_support) {
- DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported,\
- assume 18bpp panel color depth.\n");
+ DRM_DEBUG_KMS("No eDP BDB found but eDP panel "
+ "supported, assume 18bpp panel color "
+ "depth.\n");
dev_priv->edp_bpp = 18;
}
return;
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
/* CRT should always be at 0, but check anyway */
- if (intel_output->type != INTEL_OUTPUT_ANALOG)
+ if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
return false;
- return intel_ddc_probe(intel_output);
+ return intel_ddc_probe(intel_encoder);
}
static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
{
- struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output = to_intel_output(connector);
- struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_crtc *crtc;
int dpms_mode;
enum drm_connector_status status;
/* for pre-945g platforms use load detect */
if (encoder->crtc && encoder->crtc->enabled) {
- status = intel_crt_load_detect(encoder->crtc, intel_output);
+ status = intel_crt_load_detect(encoder->crtc, intel_encoder);
} else {
- crtc = intel_get_load_detect_pipe(intel_output,
+ crtc = intel_get_load_detect_pipe(intel_encoder,
NULL, &dpms_mode);
if (crtc) {
- status = intel_crt_load_detect(crtc, intel_output);
- intel_release_load_detect_pipe(intel_output, dpms_mode);
+ status = intel_crt_load_detect(crtc, intel_encoder);
+ intel_release_load_detect_pipe(intel_encoder, dpms_mode);
} else
status = connector_status_unknown;
}
static void intel_crt_destroy(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- intel_i2c_destroy(intel_output->ddc_bus);
+ intel_i2c_destroy(intel_encoder->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
static int intel_crt_get_modes(struct drm_connector *connector)
{
int ret;
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
struct i2c_adapter *ddcbus;
struct drm_device *dev = connector->dev;
- ret = intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_encoder);
if (ret || !IS_G4X(dev))
goto end;
- ddcbus = intel_output->ddc_bus;
+ ddcbus = intel_encoder->ddc_bus;
/* Try to probe digital port for output in DVI-I -> VGA mode. */
- intel_output->ddc_bus =
+ intel_encoder->ddc_bus =
intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
- if (!intel_output->ddc_bus) {
- intel_output->ddc_bus = ddcbus;
+ if (!intel_encoder->ddc_bus) {
+ intel_encoder->ddc_bus = ddcbus;
dev_printk(KERN_ERR, &connector->dev->pdev->dev,
"DDC bus registration failed for CRTDDC_D.\n");
goto end;
}
/* Try to get modes by GPIOD port */
- ret = intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_encoder);
intel_i2c_destroy(ddcbus);
end:
void intel_crt_init(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct drm_i915_private *dev_priv = dev->dev_private;
u32 i2c_reg;
- intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
- if (!intel_output)
+ intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
+ if (!intel_encoder)
return;
- connector = &intel_output->base;
- drm_connector_init(dev, &intel_output->base,
+ connector = &intel_encoder->base;
+ drm_connector_init(dev, &intel_encoder->base,
&intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
- drm_encoder_init(dev, &intel_output->enc, &intel_crt_enc_funcs,
+ drm_encoder_init(dev, &intel_encoder->enc, &intel_crt_enc_funcs,
DRM_MODE_ENCODER_DAC);
- drm_mode_connector_attach_encoder(&intel_output->base,
- &intel_output->enc);
+ drm_mode_connector_attach_encoder(&intel_encoder->base,
+ &intel_encoder->enc);
/* Set up the DDC bus. */
if (HAS_PCH_SPLIT(dev))
if (dev_priv->crt_ddc_bus != 0)
i2c_reg = dev_priv->crt_ddc_bus;
}
- intel_output->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
- if (!intel_output->ddc_bus) {
+ intel_encoder->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
+ if (!intel_encoder->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
return;
}
- intel_output->type = INTEL_OUTPUT_ANALOG;
- intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ intel_encoder->type = INTEL_OUTPUT_ANALOG;
+ intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT) |
(1 << INTEL_SDVO_LVDS_CLONE_BIT);
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
- drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
+ drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);
drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
drm_sysfs_connector_add(connector);
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "intel_drv.h"
#include "i915_drm.h"
list_for_each_entry(l_entry, &mode_config->connector_list, head) {
if (l_entry->encoder &&
l_entry->encoder->crtc == crtc) {
- struct intel_output *intel_output = to_intel_output(l_entry);
- if (intel_output->type == type)
+ struct intel_encoder *intel_encoder = to_intel_encoder(l_entry);
+ if (intel_encoder->type == type)
return true;
}
}
return false;
}
-struct drm_connector *
-intel_pipe_get_output (struct drm_crtc *crtc)
+static struct drm_connector *
+intel_pipe_get_connector (struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_mode_config *mode_config = &dev->mode_config;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_framebuffer *fb = crtc->fb;
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int plane, i;
u32 fbc_ctl, fbc_ctl2;
/* enable it... */
fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
if (IS_I945GM(dev))
- fbc_ctl |= FBC_C3_IDLE; /* 945 needs special SR handling */
+ fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
if (obj_priv->tiling_mode != I915_TILING_NONE)
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_framebuffer *fb = crtc->fb;
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
- struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(intel_fb->obj);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA :
DPFC_CTL_PLANEB);
return;
intel_fb = to_intel_framebuffer(fb);
- obj_priv = intel_fb->obj->driver_private;
+ obj_priv = to_intel_bo(intel_fb->obj);
/*
* If FBC is already on, we just have to verify that we can
static int
intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_gem_object *obj)
{
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
u32 alignment;
int ret;
intel_fb = to_intel_framebuffer(crtc->fb);
obj = intel_fb->obj;
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
mutex_lock(&dev->struct_mutex);
ret = intel_pin_and_fence_fb_obj(dev, obj);
if (old_fb) {
intel_fb = to_intel_framebuffer(old_fb);
- obj_priv = intel_fb->obj->driver_private;
+ obj_priv = to_intel_bo(intel_fb->obj);
i915_gem_object_unpin(intel_fb->obj);
}
intel_increase_pllclock(crtc, true);
int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
- int refclk, num_outputs = 0;
+ int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
u32 dpll = 0, fp = 0, fp2 = 0, dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
drm_vblank_pre_modeset(dev, pipe);
list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
if (!connector->encoder || connector->encoder->crtc != crtc)
continue;
- switch (intel_output->type) {
+ switch (intel_encoder->type) {
case INTEL_OUTPUT_LVDS:
is_lvds = true;
break;
case INTEL_OUTPUT_SDVO:
case INTEL_OUTPUT_HDMI:
is_sdvo = true;
- if (intel_output->needs_tv_clock)
+ if (intel_encoder->needs_tv_clock)
is_tv = true;
break;
case INTEL_OUTPUT_DVO:
break;
}
- num_outputs++;
+ num_connectors++;
}
- if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) {
+ if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2) {
refclk = dev_priv->lvds_ssc_freq * 1000;
DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
refclk / 1000);
if (is_edp) {
struct drm_connector *edp;
target_clock = mode->clock;
- edp = intel_pipe_get_output(crtc);
- intel_edp_link_config(to_intel_output(edp),
+ edp = intel_pipe_get_connector(crtc);
+ intel_edp_link_config(to_intel_encoder(edp),
&lane, &link_bw);
} else {
/* DP over FDI requires target mode clock
/* XXX: just matching BIOS for now */
/* dpll |= PLL_REF_INPUT_TVCLKINBC; */
dpll |= 3;
- else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2)
+ else if (is_lvds && dev_priv->lvds_use_ssc && num_connectors < 2)
dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
else
dpll |= PLL_REF_INPUT_DREFCLK;
if (!bo)
return -ENOENT;
- obj_priv = bo->driver_private;
+ obj_priv = to_intel_bo(bo);
if (bo->size < width * height * 4) {
DRM_ERROR("buffer is to small\n");
* detection.
*
* It will be up to the load-detect code to adjust the pipe as appropriate for
- * its requirements. The pipe will be connected to no other outputs.
+ * its requirements. The pipe will be connected to no other encoders.
*
- * Currently this code will only succeed if there is a pipe with no outputs
+ * Currently this code will only succeed if there is a pipe with no encoders
* configured for it. In the future, it could choose to temporarily disable
* some outputs to free up a pipe for its use.
*
704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
};
-struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
+struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
struct drm_display_mode *mode,
int *dpms_mode)
{
struct intel_crtc *intel_crtc;
struct drm_crtc *possible_crtc;
struct drm_crtc *supported_crtc =NULL;
- struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_crtc *crtc = NULL;
struct drm_device *dev = encoder->dev;
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
}
encoder->crtc = crtc;
- intel_output->base.encoder = encoder;
- intel_output->load_detect_temp = true;
+ intel_encoder->base.encoder = encoder;
+ intel_encoder->load_detect_temp = true;
intel_crtc = to_intel_crtc(crtc);
*dpms_mode = intel_crtc->dpms_mode;
return crtc;
}
-void intel_release_load_detect_pipe(struct intel_output *intel_output, int dpms_mode)
+void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, int dpms_mode)
{
- struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_device *dev = encoder->dev;
struct drm_crtc *crtc = encoder->crtc;
struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
- if (intel_output->load_detect_temp) {
+ if (intel_encoder->load_detect_temp) {
encoder->crtc = NULL;
- intel_output->base.encoder = NULL;
- intel_output->load_detect_temp = false;
+ intel_encoder->base.encoder = NULL;
+ intel_encoder->load_detect_temp = false;
crtc->enabled = drm_helper_crtc_in_use(crtc);
drm_helper_disable_unused_functions(dev);
}
- /* Switch crtc and output back off if necessary */
+ /* Switch crtc and encoder back off if necessary */
if (crtc->enabled && dpms_mode != DRM_MODE_DPMS_ON) {
if (encoder->crtc == crtc)
encoder_funcs->dpms(encoder, dpms_mode);
work = intel_crtc->unpin_work;
if (work == NULL || !work->pending) {
if (work && !work->pending) {
- obj_priv = work->pending_flip_obj->driver_private;
+ obj_priv = to_intel_bo(work->pending_flip_obj);
DRM_DEBUG_DRIVER("flip finish: %p (%d) not pending?\n",
obj_priv,
atomic_read(&obj_priv->pending_flip));
spin_unlock_irqrestore(&dev->event_lock, flags);
- obj_priv = work->pending_flip_obj->driver_private;
+ obj_priv = to_intel_bo(work->pending_flip_obj);
/* Initial scanout buffer will have a 0 pending flip count */
if ((atomic_read(&obj_priv->pending_flip) == 0) ||
ret = intel_pin_and_fence_fb_obj(dev, obj);
if (ret != 0) {
DRM_DEBUG_DRIVER("flip queue: %p pin & fence failed\n",
- obj->driver_private);
+ to_intel_bo(obj));
kfree(work);
intel_crtc->unpin_work = NULL;
mutex_unlock(&dev->struct_mutex);
crtc->fb = fb;
i915_gem_object_flush_write_domain(obj);
drm_vblank_get(dev, intel_crtc->pipe);
- obj_priv = obj->driver_private;
+ obj_priv = to_intel_bo(obj);
atomic_inc(&obj_priv->pending_flip);
work->pending_flip_obj = obj;
int entry = 0;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- struct intel_output *intel_output = to_intel_output(connector);
- if (type_mask & intel_output->clone_mask)
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ if (type_mask & intel_encoder->clone_mask)
index_mask |= (1 << entry);
entry++;
}
intel_tv_init(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- struct intel_output *intel_output = to_intel_output(connector);
- struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct drm_encoder *encoder = &intel_encoder->enc;
- encoder->possible_crtcs = intel_output->crtc_mask;
+ encoder->possible_crtcs = intel_encoder->crtc_mask;
encoder->possible_clones = intel_connector_clones(dev,
- intel_output->clone_mask);
+ intel_encoder->clone_mask);
}
}
* specs, but enable as much else as we can.
*/
if (HAS_PCH_SPLIT(dev)) {
+ uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+ if (IS_IRONLAKE(dev)) {
+ /* Required for FBC */
+ dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE;
+ /* Required for CxSR */
+ dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
+
+ I915_WRITE(PCH_3DCGDIS0,
+ MARIUNIT_CLOCK_GATE_DISABLE |
+ SVSMUNIT_CLOCK_GATE_DISABLE);
+ }
+
+ I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
return;
} else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
struct drm_i915_gem_object *obj_priv = NULL;
if (dev_priv->pwrctx) {
- obj_priv = dev_priv->pwrctx->driver_private;
+ obj_priv = to_intel_bo(dev_priv->pwrctx);
} else {
struct drm_gem_object *pwrctx;
pwrctx = intel_alloc_power_context(dev);
if (pwrctx) {
dev_priv->pwrctx = pwrctx;
- obj_priv = pwrctx->driver_private;
+ obj_priv = to_intel_bo(pwrctx);
}
}
dev_priv->display.fbc_enabled = g4x_fbc_enabled;
dev_priv->display.enable_fbc = g4x_enable_fbc;
dev_priv->display.disable_fbc = g4x_disable_fbc;
- } else if (IS_I965GM(dev) || IS_I945GM(dev) || IS_I915GM(dev)) {
+ } else if (IS_I965GM(dev)) {
dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
dev_priv->display.enable_fbc = i8xx_enable_fbc;
dev_priv->display.disable_fbc = i8xx_disable_fbc;
dev_priv->display.update_wm = g4x_update_wm;
else if (IS_I965G(dev))
dev_priv->display.update_wm = i965_update_wm;
- else if (IS_I9XX(dev) || IS_MOBILE(dev)) {
+ else if (IS_I9XX(dev)) {
dev_priv->display.update_wm = i9xx_update_wm;
dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
+ } else if (IS_I85X(dev)) {
+ dev_priv->display.update_wm = i9xx_update_wm;
+ dev_priv->display.get_fifo_size = i85x_get_fifo_size;
} else {
- if (IS_I85X(dev))
- dev_priv->display.get_fifo_size = i85x_get_fifo_size;
- else if (IS_845G(dev))
+ dev_priv->display.update_wm = i830_update_wm;
+ if (IS_845G(dev))
dev_priv->display.get_fifo_size = i845_get_fifo_size;
else
dev_priv->display.get_fifo_size = i830_get_fifo_size;
- dev_priv->display.update_wm = i830_update_wm;
}
}
if (dev_priv->pwrctx) {
struct drm_i915_gem_object *obj_priv;
- obj_priv = dev_priv->pwrctx->driver_private;
+ obj_priv = to_intel_bo(dev_priv->pwrctx);
I915_WRITE(PWRCTXA, obj_priv->gtt_offset &~ PWRCTX_EN);
I915_READ(PWRCTXA);
i915_gem_object_unpin(dev_priv->pwrctx);
*/
struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- return &intel_output->enc;
+ return &intel_encoder->enc;
}
/*
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
uint8_t link_bw;
uint8_t lane_count;
uint8_t dpcd[4];
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct i2c_adapter adapter;
struct i2c_algo_dp_aux_data algo;
};
static void
-intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+intel_dp_link_train(struct intel_encoder *intel_encoder, uint32_t DP,
uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]);
static void
-intel_dp_link_down(struct intel_output *intel_output, uint32_t DP);
+intel_dp_link_down(struct intel_encoder *intel_encoder, uint32_t DP);
void
-intel_edp_link_config (struct intel_output *intel_output,
+intel_edp_link_config (struct intel_encoder *intel_encoder,
int *lane_num, int *link_bw)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
*lane_num = dp_priv->lane_count;
if (dp_priv->link_bw == DP_LINK_BW_1_62)
}
static int
-intel_dp_max_lane_count(struct intel_output *intel_output)
+intel_dp_max_lane_count(struct intel_encoder *intel_encoder)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
int max_lane_count = 4;
if (dp_priv->dpcd[0] >= 0x11) {
}
static int
-intel_dp_max_link_bw(struct intel_output *intel_output)
+intel_dp_max_link_bw(struct intel_encoder *intel_encoder)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
int max_link_bw = dp_priv->dpcd[1];
switch (max_link_bw) {
/* I think this is a fiction */
static int
intel_dp_link_required(struct drm_device *dev,
- struct intel_output *intel_output, int pixel_clock)
+ struct intel_encoder *intel_encoder, int pixel_clock)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- if (IS_eDP(intel_output))
+ if (IS_eDP(intel_encoder))
return (pixel_clock * dev_priv->edp_bpp) / 8;
else
return pixel_clock * 3;
intel_dp_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- struct intel_output *intel_output = to_intel_output(connector);
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_output));
- int max_lanes = intel_dp_max_lane_count(intel_output);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_encoder));
+ int max_lanes = intel_dp_max_lane_count(intel_encoder);
- if (intel_dp_link_required(connector->dev, intel_output, mode->clock)
+ if (intel_dp_link_required(connector->dev, intel_encoder, mode->clock)
> max_link_clock * max_lanes)
return MODE_CLOCK_HIGH;
}
static int
-intel_dp_aux_ch(struct intel_output *intel_output,
+intel_dp_aux_ch(struct intel_encoder *intel_encoder,
uint8_t *send, int send_bytes,
uint8_t *recv, int recv_size)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
uint32_t output_reg = dp_priv->output_reg;
- struct drm_device *dev = intel_output->base.dev;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t ch_ctl = output_reg + 0x10;
uint32_t ch_data = ch_ctl + 4;
* and would like to run at 2MHz. So, take the
* hrawclk value and divide by 2 and use that
*/
- if (IS_eDP(intel_output))
+ if (IS_eDP(intel_encoder))
aux_clock_divider = 225; /* eDP input clock at 450Mhz */
else if (HAS_PCH_SPLIT(dev))
aux_clock_divider = 62; /* IRL input clock fixed at 125Mhz */
/* Write data to the aux channel in native mode */
static int
-intel_dp_aux_native_write(struct intel_output *intel_output,
+intel_dp_aux_native_write(struct intel_encoder *intel_encoder,
uint16_t address, uint8_t *send, int send_bytes)
{
int ret;
memcpy(&msg[4], send, send_bytes);
msg_bytes = send_bytes + 4;
for (;;) {
- ret = intel_dp_aux_ch(intel_output, msg, msg_bytes, &ack, 1);
+ ret = intel_dp_aux_ch(intel_encoder, msg, msg_bytes, &ack, 1);
if (ret < 0)
return ret;
if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
/* Write a single byte to the aux channel in native mode */
static int
-intel_dp_aux_native_write_1(struct intel_output *intel_output,
+intel_dp_aux_native_write_1(struct intel_encoder *intel_encoder,
uint16_t address, uint8_t byte)
{
- return intel_dp_aux_native_write(intel_output, address, &byte, 1);
+ return intel_dp_aux_native_write(intel_encoder, address, &byte, 1);
}
/* read bytes from a native aux channel */
static int
-intel_dp_aux_native_read(struct intel_output *intel_output,
+intel_dp_aux_native_read(struct intel_encoder *intel_encoder,
uint16_t address, uint8_t *recv, int recv_bytes)
{
uint8_t msg[4];
reply_bytes = recv_bytes + 1;
for (;;) {
- ret = intel_dp_aux_ch(intel_output, msg, msg_bytes,
+ ret = intel_dp_aux_ch(intel_encoder, msg, msg_bytes,
reply, reply_bytes);
if (ret == 0)
return -EPROTO;
struct intel_dp_priv *dp_priv = container_of(adapter,
struct intel_dp_priv,
adapter);
- struct intel_output *intel_output = dp_priv->intel_output;
+ struct intel_encoder *intel_encoder = dp_priv->intel_encoder;
uint16_t address = algo_data->address;
uint8_t msg[5];
uint8_t reply[2];
}
for (;;) {
- ret = intel_dp_aux_ch(intel_output,
+ ret = intel_dp_aux_ch(intel_encoder,
msg, msg_bytes,
reply, reply_bytes);
if (ret < 0) {
}
static int
-intel_dp_i2c_init(struct intel_output *intel_output, const char *name)
+intel_dp_i2c_init(struct intel_encoder *intel_encoder, const char *name)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
DRM_DEBUG_KMS("i2c_init %s\n", name);
dp_priv->algo.running = false;
strncpy (dp_priv->adapter.name, name, sizeof(dp_priv->adapter.name) - 1);
dp_priv->adapter.name[sizeof(dp_priv->adapter.name) - 1] = '\0';
dp_priv->adapter.algo_data = &dp_priv->algo;
- dp_priv->adapter.dev.parent = &intel_output->base.kdev;
+ dp_priv->adapter.dev.parent = &intel_encoder->base.kdev;
return i2c_dp_aux_add_bus(&dp_priv->adapter);
}
intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
int lane_count, clock;
- int max_lane_count = intel_dp_max_lane_count(intel_output);
- int max_clock = intel_dp_max_link_bw(intel_output) == DP_LINK_BW_2_7 ? 1 : 0;
+ int max_lane_count = intel_dp_max_lane_count(intel_encoder);
+ int max_clock = intel_dp_max_link_bw(intel_encoder) == DP_LINK_BW_2_7 ? 1 : 0;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_link_clock(bws[clock]) * lane_count;
- if (intel_dp_link_required(encoder->dev, intel_output, mode->clock)
+ if (intel_dp_link_required(encoder->dev, intel_encoder, mode->clock)
<= link_avail) {
dp_priv->link_bw = bws[clock];
dp_priv->lane_count = lane_count;
struct intel_dp_m_n m_n;
/*
- * Find the lane count in the intel_output private
+ * Find the lane count in the intel_encoder private
*/
list_for_each_entry(connector, &mode_config->connector_list, head) {
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
if (!connector->encoder || connector->encoder->crtc != crtc)
continue;
- if (intel_output->type == INTEL_OUTPUT_DISPLAYPORT) {
+ if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
lane_count = dp_priv->lane_count;
break;
}
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
- struct drm_crtc *crtc = intel_output->enc.crtc;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
+ struct drm_crtc *crtc = intel_encoder->enc.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
dp_priv->DP = (DP_LINK_TRAIN_OFF |
if (intel_crtc->pipe == 1)
dp_priv->DP |= DP_PIPEB_SELECT;
- if (IS_eDP(intel_output)) {
+ if (IS_eDP(intel_encoder)) {
/* don't miss out required setting for eDP */
dp_priv->DP |= DP_PLL_ENABLE;
if (adjusted_mode->clock < 200000)
static void
intel_dp_dpms(struct drm_encoder *encoder, int mode)
{
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
- struct drm_device *dev = intel_output->base.dev;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dp_reg = I915_READ(dp_priv->output_reg);
if (mode != DRM_MODE_DPMS_ON) {
if (dp_reg & DP_PORT_EN) {
- intel_dp_link_down(intel_output, dp_priv->DP);
- if (IS_eDP(intel_output))
+ intel_dp_link_down(intel_encoder, dp_priv->DP);
+ if (IS_eDP(intel_encoder))
ironlake_edp_backlight_off(dev);
}
} else {
if (!(dp_reg & DP_PORT_EN)) {
- intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
- if (IS_eDP(intel_output))
+ intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
+ if (IS_eDP(intel_encoder))
ironlake_edp_backlight_on(dev);
}
}
* link status information
*/
static bool
-intel_dp_get_link_status(struct intel_output *intel_output,
+intel_dp_get_link_status(struct intel_encoder *intel_encoder,
uint8_t link_status[DP_LINK_STATUS_SIZE])
{
int ret;
- ret = intel_dp_aux_native_read(intel_output,
+ ret = intel_dp_aux_native_read(intel_encoder,
DP_LANE0_1_STATUS,
link_status, DP_LINK_STATUS_SIZE);
if (ret != DP_LINK_STATUS_SIZE)
static void
intel_dp_save(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct drm_device *dev = intel_output->base.dev;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
dp_priv->save_DP = I915_READ(dp_priv->output_reg);
- intel_dp_aux_native_read(intel_output, DP_LINK_BW_SET,
+ intel_dp_aux_native_read(intel_encoder, DP_LINK_BW_SET,
dp_priv->save_link_configuration,
sizeof (dp_priv->save_link_configuration));
}
}
static void
-intel_get_adjust_train(struct intel_output *intel_output,
+intel_get_adjust_train(struct intel_encoder *intel_encoder,
uint8_t link_status[DP_LINK_STATUS_SIZE],
int lane_count,
uint8_t train_set[4])
}
static bool
-intel_dp_set_link_train(struct intel_output *intel_output,
+intel_dp_set_link_train(struct intel_encoder *intel_encoder,
uint32_t dp_reg_value,
uint8_t dp_train_pat,
uint8_t train_set[4],
bool first)
{
- struct drm_device *dev = intel_output->base.dev;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
int ret;
I915_WRITE(dp_priv->output_reg, dp_reg_value);
if (first)
intel_wait_for_vblank(dev);
- intel_dp_aux_native_write_1(intel_output,
+ intel_dp_aux_native_write_1(intel_encoder,
DP_TRAINING_PATTERN_SET,
dp_train_pat);
- ret = intel_dp_aux_native_write(intel_output,
+ ret = intel_dp_aux_native_write(intel_encoder,
DP_TRAINING_LANE0_SET, train_set, 4);
if (ret != 4)
return false;
}
static void
-intel_dp_link_train(struct intel_output *intel_output, uint32_t DP,
+intel_dp_link_train(struct intel_encoder *intel_encoder, uint32_t DP,
uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE])
{
- struct drm_device *dev = intel_output->base.dev;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
uint8_t train_set[4];
uint8_t link_status[DP_LINK_STATUS_SIZE];
int i;
int tries;
/* Write the link configuration data */
- intel_dp_aux_native_write(intel_output, 0x100,
+ intel_dp_aux_native_write(intel_encoder, 0x100,
link_configuration, DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
uint32_t signal_levels = intel_dp_signal_levels(train_set[0], dp_priv->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_1,
+ if (!intel_dp_set_link_train(intel_encoder, DP | DP_LINK_TRAIN_PAT_1,
DP_TRAINING_PATTERN_1, train_set, first))
break;
first = false;
/* Set training pattern 1 */
udelay(100);
- if (!intel_dp_get_link_status(intel_output, link_status))
+ if (!intel_dp_get_link_status(intel_encoder, link_status))
break;
if (intel_clock_recovery_ok(link_status, dp_priv->lane_count)) {
voltage = train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
/* Compute new train_set as requested by target */
- intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ intel_get_adjust_train(intel_encoder, link_status, dp_priv->lane_count, train_set);
}
/* channel equalization */
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
/* channel eq pattern */
- if (!intel_dp_set_link_train(intel_output, DP | DP_LINK_TRAIN_PAT_2,
+ if (!intel_dp_set_link_train(intel_encoder, DP | DP_LINK_TRAIN_PAT_2,
DP_TRAINING_PATTERN_2, train_set,
false))
break;
udelay(400);
- if (!intel_dp_get_link_status(intel_output, link_status))
+ if (!intel_dp_get_link_status(intel_encoder, link_status))
break;
if (intel_channel_eq_ok(link_status, dp_priv->lane_count)) {
break;
/* Compute new train_set as requested by target */
- intel_get_adjust_train(intel_output, link_status, dp_priv->lane_count, train_set);
+ intel_get_adjust_train(intel_encoder, link_status, dp_priv->lane_count, train_set);
++tries;
}
I915_WRITE(dp_priv->output_reg, DP | DP_LINK_TRAIN_OFF);
POSTING_READ(dp_priv->output_reg);
- intel_dp_aux_native_write_1(intel_output,
+ intel_dp_aux_native_write_1(intel_encoder,
DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE);
}
static void
-intel_dp_link_down(struct intel_output *intel_output, uint32_t DP)
+intel_dp_link_down(struct intel_encoder *intel_encoder, uint32_t DP)
{
- struct drm_device *dev = intel_output->base.dev;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
DRM_DEBUG_KMS("\n");
- if (IS_eDP(intel_output)) {
+ if (IS_eDP(intel_encoder)) {
DP &= ~DP_PLL_ENABLE;
I915_WRITE(dp_priv->output_reg, DP);
POSTING_READ(dp_priv->output_reg);
udelay(17000);
- if (IS_eDP(intel_output))
+ if (IS_eDP(intel_encoder))
DP |= DP_LINK_TRAIN_OFF;
I915_WRITE(dp_priv->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(dp_priv->output_reg);
static void
intel_dp_restore(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
if (dp_priv->save_DP & DP_PORT_EN)
- intel_dp_link_train(intel_output, dp_priv->save_DP, dp_priv->save_link_configuration);
+ intel_dp_link_train(intel_encoder, dp_priv->save_DP, dp_priv->save_link_configuration);
else
- intel_dp_link_down(intel_output, dp_priv->save_DP);
+ intel_dp_link_down(intel_encoder, dp_priv->save_DP);
}
/*
*/
static void
-intel_dp_check_link_status(struct intel_output *intel_output)
+intel_dp_check_link_status(struct intel_encoder *intel_encoder)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
uint8_t link_status[DP_LINK_STATUS_SIZE];
- if (!intel_output->enc.crtc)
+ if (!intel_encoder->enc.crtc)
return;
- if (!intel_dp_get_link_status(intel_output, link_status)) {
- intel_dp_link_down(intel_output, dp_priv->DP);
+ if (!intel_dp_get_link_status(intel_encoder, link_status)) {
+ intel_dp_link_down(intel_encoder, dp_priv->DP);
return;
}
if (!intel_channel_eq_ok(link_status, dp_priv->lane_count))
- intel_dp_link_train(intel_output, dp_priv->DP, dp_priv->link_configuration);
+ intel_dp_link_train(intel_encoder, dp_priv->DP, dp_priv->link_configuration);
}
static enum drm_connector_status
ironlake_dp_detect(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
enum drm_connector_status status;
status = connector_status_disconnected;
- if (intel_dp_aux_native_read(intel_output,
+ if (intel_dp_aux_native_read(intel_encoder,
0x000, dp_priv->dpcd,
sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
{
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct drm_device *dev = intel_output->base.dev;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
uint32_t temp, bit;
enum drm_connector_status status;
return connector_status_disconnected;
status = connector_status_disconnected;
- if (intel_dp_aux_native_read(intel_output,
+ if (intel_dp_aux_native_read(intel_encoder,
0x000, dp_priv->dpcd,
sizeof (dp_priv->dpcd)) == sizeof (dp_priv->dpcd))
{
static int intel_dp_get_modes(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct drm_device *dev = intel_output->base.dev;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
int ret;
/* We should parse the EDID data and find out if it has an audio sink
*/
- ret = intel_ddc_get_modes(intel_output);
+ ret = intel_ddc_get_modes(intel_encoder);
if (ret)
return ret;
/* if eDP has no EDID, try to use fixed panel mode from VBT */
- if (IS_eDP(intel_output)) {
+ if (IS_eDP(intel_encoder)) {
if (dev_priv->panel_fixed_mode != NULL) {
struct drm_display_mode *mode;
mode = drm_mode_duplicate(dev, dev_priv->panel_fixed_mode);
static void
intel_dp_destroy (struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- if (intel_output->i2c_bus)
- intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_encoder->i2c_bus)
+ intel_i2c_destroy(intel_encoder->i2c_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
- kfree(intel_output);
+ kfree(intel_encoder);
}
static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
};
void
-intel_dp_hot_plug(struct intel_output *intel_output)
+intel_dp_hot_plug(struct intel_encoder *intel_encoder)
{
- struct intel_dp_priv *dp_priv = intel_output->dev_priv;
+ struct intel_dp_priv *dp_priv = intel_encoder->dev_priv;
if (dp_priv->dpms_mode == DRM_MODE_DPMS_ON)
- intel_dp_check_link_status(intel_output);
+ intel_dp_check_link_status(intel_encoder);
}
void
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct intel_dp_priv *dp_priv;
const char *name = NULL;
- intel_output = kcalloc(sizeof(struct intel_output) +
+ intel_encoder = kcalloc(sizeof(struct intel_encoder) +
sizeof(struct intel_dp_priv), 1, GFP_KERNEL);
- if (!intel_output)
+ if (!intel_encoder)
return;
- dp_priv = (struct intel_dp_priv *)(intel_output + 1);
+ dp_priv = (struct intel_dp_priv *)(intel_encoder + 1);
- connector = &intel_output->base;
+ connector = &intel_encoder->base;
drm_connector_init(dev, connector, &intel_dp_connector_funcs,
DRM_MODE_CONNECTOR_DisplayPort);
drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
if (output_reg == DP_A)
- intel_output->type = INTEL_OUTPUT_EDP;
+ intel_encoder->type = INTEL_OUTPUT_EDP;
else
- intel_output->type = INTEL_OUTPUT_DISPLAYPORT;
+ intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
if (output_reg == DP_B || output_reg == PCH_DP_B)
- intel_output->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
+ intel_encoder->clone_mask = (1 << INTEL_DP_B_CLONE_BIT);
else if (output_reg == DP_C || output_reg == PCH_DP_C)
- intel_output->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
+ intel_encoder->clone_mask = (1 << INTEL_DP_C_CLONE_BIT);
else if (output_reg == DP_D || output_reg == PCH_DP_D)
- intel_output->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
+ intel_encoder->clone_mask = (1 << INTEL_DP_D_CLONE_BIT);
- if (IS_eDP(intel_output))
- intel_output->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
+ if (IS_eDP(intel_encoder))
+ intel_encoder->clone_mask = (1 << INTEL_EDP_CLONE_BIT);
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
connector->interlace_allowed = true;
connector->doublescan_allowed = 0;
- dp_priv->intel_output = intel_output;
+ dp_priv->intel_encoder = intel_encoder;
dp_priv->output_reg = output_reg;
dp_priv->has_audio = false;
dp_priv->dpms_mode = DRM_MODE_DPMS_ON;
- intel_output->dev_priv = dp_priv;
+ intel_encoder->dev_priv = dp_priv;
- drm_encoder_init(dev, &intel_output->enc, &intel_dp_enc_funcs,
+ drm_encoder_init(dev, &intel_encoder->enc, &intel_dp_enc_funcs,
DRM_MODE_ENCODER_TMDS);
- drm_encoder_helper_add(&intel_output->enc, &intel_dp_helper_funcs);
+ drm_encoder_helper_add(&intel_encoder->enc, &intel_dp_helper_funcs);
- drm_mode_connector_attach_encoder(&intel_output->base,
- &intel_output->enc);
+ drm_mode_connector_attach_encoder(&intel_encoder->base,
+ &intel_encoder->enc);
drm_sysfs_connector_add(connector);
/* Set up the DDC bus. */
break;
}
- intel_dp_i2c_init(intel_output, name);
+ intel_dp_i2c_init(intel_encoder, name);
- intel_output->ddc_bus = &dp_priv->adapter;
- intel_output->hot_plug = intel_dp_hot_plug;
+ intel_encoder->ddc_bus = &dp_priv->adapter;
+ intel_encoder->hot_plug = intel_dp_hot_plug;
if (output_reg == DP_A) {
/* initialize panel mode from VBT if available for eDP */
};
-struct intel_output {
+struct intel_encoder {
struct drm_connector base;
struct drm_encoder enc;
bool load_detect_temp;
bool needs_tv_clock;
void *dev_priv;
- void (*hot_plug)(struct intel_output *);
+ void (*hot_plug)(struct intel_encoder *);
int crtc_mask;
int clone_mask;
};
};
#define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
-#define to_intel_output(x) container_of(x, struct intel_output, base)
-#define enc_to_intel_output(x) container_of(x, struct intel_output, enc)
+#define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
+#define enc_to_intel_encoder(x) container_of(x, struct intel_encoder, enc)
#define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
struct i2c_adapter *intel_i2c_create(struct drm_device *dev, const u32 reg,
const char *name);
void intel_i2c_destroy(struct i2c_adapter *adapter);
-int intel_ddc_get_modes(struct intel_output *intel_output);
-extern bool intel_ddc_probe(struct intel_output *intel_output);
+int intel_ddc_get_modes(struct intel_encoder *intel_encoder);
+extern bool intel_ddc_probe(struct intel_encoder *intel_encoder);
void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
void intel_i2c_reset_gmbus(struct drm_device *dev);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
-extern void intel_edp_link_config (struct intel_output *, int *, int *);
+extern void intel_edp_link_config (struct intel_encoder *, int *, int *);
extern int intel_panel_fitter_pipe (struct drm_device *dev);
struct drm_file *file_priv);
extern void intel_wait_for_vblank(struct drm_device *dev);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
-extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
+extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,
struct drm_display_mode *mode,
int *dpms_mode);
-extern void intel_release_load_detect_pipe(struct intel_output *intel_output,
+extern void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
int dpms_mode);
extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
static void intel_dvo_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
u32 dvo_reg = dvo->dvo_reg;
u32 temp = I915_READ(dvo_reg);
static void intel_dvo_save(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
/* Each output should probably just save the registers it touches,
* but for now, use more overkill.
static void intel_dvo_restore(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
dvo->dev_ops->restore(dvo);
static int intel_dvo_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
/* If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
int pipe = intel_crtc->pipe;
u32 dvo_val;
u32 dvo_reg = dvo->dvo_reg, dvo_srcdim_reg;
*/
static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
return dvo->dev_ops->detect(dvo);
}
static int intel_dvo_get_modes(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
/* We should probably have an i2c driver get_modes function for those
* devices which will have a fixed set of modes determined by the chip
* (TV-out, for example), but for now with just TMDS and LVDS,
* that's not the case.
*/
- intel_ddc_get_modes(intel_output);
+ intel_ddc_get_modes(intel_encoder);
if (!list_empty(&connector->probed_modes))
return 1;
static void intel_dvo_destroy (struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
if (dvo) {
if (dvo->dev_ops->destroy)
/* no need, in i830_dvoices[] now */
//kfree(dvo);
}
- if (intel_output->i2c_bus)
- intel_i2c_destroy(intel_output->i2c_bus);
- if (intel_output->ddc_bus)
- intel_i2c_destroy(intel_output->ddc_bus);
+ if (intel_encoder->i2c_bus)
+ intel_i2c_destroy(intel_encoder->i2c_bus);
+ if (intel_encoder->ddc_bus)
+ intel_i2c_destroy(intel_encoder->ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
- kfree(intel_output);
+ kfree(intel_encoder);
}
#ifdef RANDR_GET_CRTC_INTERFACE
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
int pipe = !!(I915_READ(dvo->dvo_reg) & SDVO_PIPE_B_SELECT);
return intel_pipe_to_crtc(pScrn, pipe);
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_dvo_device *dvo = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_dvo_device *dvo = intel_encoder->dev_priv;
uint32_t dvo_reg = dvo->dvo_reg;
uint32_t dvo_val = I915_READ(dvo_reg);
struct drm_display_mode *mode = NULL;
void intel_dvo_init(struct drm_device *dev)
{
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct intel_dvo_device *dvo;
struct i2c_adapter *i2cbus = NULL;
int ret = 0;
int i;
int encoder_type = DRM_MODE_ENCODER_NONE;
- intel_output = kzalloc (sizeof(struct intel_output), GFP_KERNEL);
- if (!intel_output)
+ intel_encoder = kzalloc (sizeof(struct intel_encoder), GFP_KERNEL);
+ if (!intel_encoder)
return;
/* Set up the DDC bus */
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
- if (!intel_output->ddc_bus)
+ intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOD, "DVODDC_D");
+ if (!intel_encoder->ddc_bus)
goto free_intel;
/* Now, try to find a controller */
for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
- struct drm_connector *connector = &intel_output->base;
+ struct drm_connector *connector = &intel_encoder->base;
int gpio;
dvo = &intel_dvo_devices[i];
if (!ret)
continue;
- intel_output->type = INTEL_OUTPUT_DVO;
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->type = INTEL_OUTPUT_DVO;
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
switch (dvo->type) {
case INTEL_DVO_CHIP_TMDS:
- intel_output->clone_mask =
+ intel_encoder->clone_mask =
(1 << INTEL_DVO_TMDS_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT);
drm_connector_init(dev, connector,
encoder_type = DRM_MODE_ENCODER_TMDS;
break;
case INTEL_DVO_CHIP_LVDS:
- intel_output->clone_mask =
+ intel_encoder->clone_mask =
(1 << INTEL_DVO_LVDS_CLONE_BIT);
drm_connector_init(dev, connector,
&intel_dvo_connector_funcs,
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
- intel_output->dev_priv = dvo;
- intel_output->i2c_bus = i2cbus;
+ intel_encoder->dev_priv = dvo;
+ intel_encoder->i2c_bus = i2cbus;
- drm_encoder_init(dev, &intel_output->enc,
+ drm_encoder_init(dev, &intel_encoder->enc,
&intel_dvo_enc_funcs, encoder_type);
- drm_encoder_helper_add(&intel_output->enc,
+ drm_encoder_helper_add(&intel_encoder->enc,
&intel_dvo_helper_funcs);
- drm_mode_connector_attach_encoder(&intel_output->base,
- &intel_output->enc);
+ drm_mode_connector_attach_encoder(&intel_encoder->base,
+ &intel_encoder->enc);
if (dvo->type == INTEL_DVO_CHIP_LVDS) {
/* For our LVDS chipsets, we should hopefully be able
* to dig the fixed panel mode out of the BIOS data.
return;
}
- intel_i2c_destroy(intel_output->ddc_bus);
+ intel_i2c_destroy(intel_encoder->ddc_bus);
/* Didn't find a chip, so tear down. */
if (i2cbus != NULL)
intel_i2c_destroy(i2cbus);
free_intel:
- kfree(intel_output);
+ kfree(intel_encoder);
}
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
-#include <linux/slab.h>
#include <linux/sysrq.h>
#include <linux/delay.h>
#include <linux/fb.h>
ret = -ENOMEM;
goto out;
}
- obj_priv = fbo->driver_private;
+ obj_priv = to_intel_bo(fbo);
mutex_lock(&dev->struct_mutex);
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "drmP.h"
#include "drm.h"
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_hdmi_priv *hdmi_priv = intel_encoder->dev_priv;
u32 sdvox;
sdvox = SDVO_ENCODING_HDMI |
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_hdmi_priv *hdmi_priv = intel_encoder->dev_priv;
u32 temp;
temp = I915_READ(hdmi_priv->sdvox_reg);
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_hdmi_priv *hdmi_priv = intel_encoder->dev_priv;
hdmi_priv->save_SDVOX = I915_READ(hdmi_priv->sdvox_reg);
}
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_hdmi_priv *hdmi_priv = intel_encoder->dev_priv;
I915_WRITE(hdmi_priv->sdvox_reg, hdmi_priv->save_SDVOX);
POSTING_READ(hdmi_priv->sdvox_reg);
static enum drm_connector_status
intel_hdmi_detect(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_hdmi_priv *hdmi_priv = intel_encoder->dev_priv;
struct edid *edid = NULL;
enum drm_connector_status status = connector_status_disconnected;
hdmi_priv->has_hdmi_sink = false;
- edid = drm_get_edid(&intel_output->base,
- intel_output->ddc_bus);
+ edid = drm_get_edid(&intel_encoder->base,
+ intel_encoder->ddc_bus);
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
}
- intel_output->base.display_info.raw_edid = NULL;
+ intel_encoder->base.display_info.raw_edid = NULL;
kfree(edid);
}
static int intel_hdmi_get_modes(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
/* We should parse the EDID data and find out if it's an HDMI sink so
* we can send audio to it.
*/
- return intel_ddc_get_modes(intel_output);
+ return intel_ddc_get_modes(intel_encoder);
}
static void intel_hdmi_destroy(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- if (intel_output->i2c_bus)
- intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_encoder->i2c_bus)
+ intel_i2c_destroy(intel_encoder->i2c_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
- kfree(intel_output);
+ kfree(intel_encoder);
}
static const struct drm_encoder_helper_funcs intel_hdmi_helper_funcs = {
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct intel_hdmi_priv *hdmi_priv;
- intel_output = kcalloc(sizeof(struct intel_output) +
+ intel_encoder = kcalloc(sizeof(struct intel_encoder) +
sizeof(struct intel_hdmi_priv), 1, GFP_KERNEL);
- if (!intel_output)
+ if (!intel_encoder)
return;
- hdmi_priv = (struct intel_hdmi_priv *)(intel_output + 1);
+ hdmi_priv = (struct intel_hdmi_priv *)(intel_encoder + 1);
- connector = &intel_output->base;
+ connector = &intel_encoder->base;
drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
DRM_MODE_CONNECTOR_HDMIA);
drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
- intel_output->type = INTEL_OUTPUT_HDMI;
+ intel_encoder->type = INTEL_OUTPUT_HDMI;
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
/* Set up the DDC bus. */
if (sdvox_reg == SDVOB) {
- intel_output->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
+ intel_encoder->clone_mask = (1 << INTEL_HDMIB_CLONE_BIT);
+ intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOE, "HDMIB");
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == SDVOC) {
- intel_output->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
+ intel_encoder->clone_mask = (1 << INTEL_HDMIC_CLONE_BIT);
+ intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOD, "HDMIC");
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIB) {
- intel_output->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
- intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
+ intel_encoder->clone_mask = (1 << INTEL_HDMID_CLONE_BIT);
+ intel_encoder->ddc_bus = intel_i2c_create(dev, PCH_GPIOE,
"HDMIB");
dev_priv->hotplug_supported_mask |= HDMIB_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMIC) {
- intel_output->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
- intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
+ intel_encoder->clone_mask = (1 << INTEL_HDMIE_CLONE_BIT);
+ intel_encoder->ddc_bus = intel_i2c_create(dev, PCH_GPIOD,
"HDMIC");
dev_priv->hotplug_supported_mask |= HDMIC_HOTPLUG_INT_STATUS;
} else if (sdvox_reg == HDMID) {
- intel_output->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
- intel_output->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
+ intel_encoder->clone_mask = (1 << INTEL_HDMIF_CLONE_BIT);
+ intel_encoder->ddc_bus = intel_i2c_create(dev, PCH_GPIOF,
"HDMID");
dev_priv->hotplug_supported_mask |= HDMID_HOTPLUG_INT_STATUS;
}
- if (!intel_output->ddc_bus)
+ if (!intel_encoder->ddc_bus)
goto err_connector;
hdmi_priv->sdvox_reg = sdvox_reg;
- intel_output->dev_priv = hdmi_priv;
+ intel_encoder->dev_priv = hdmi_priv;
- drm_encoder_init(dev, &intel_output->enc, &intel_hdmi_enc_funcs,
+ drm_encoder_init(dev, &intel_encoder->enc, &intel_hdmi_enc_funcs,
DRM_MODE_ENCODER_TMDS);
- drm_encoder_helper_add(&intel_output->enc, &intel_hdmi_helper_funcs);
+ drm_encoder_helper_add(&intel_encoder->enc, &intel_hdmi_helper_funcs);
- drm_mode_connector_attach_encoder(&intel_output->base,
- &intel_output->enc);
+ drm_mode_connector_attach_encoder(&intel_encoder->base,
+ &intel_encoder->enc);
drm_sysfs_connector_add(connector);
/* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
err_connector:
drm_connector_cleanup(connector);
- kfree(intel_output);
+ kfree(intel_encoder);
return;
}
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
#include "drmP.h"
#include <acpi/button.h>
#include <linux/dmi.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_crtc.h"
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
struct drm_encoder *tmp_encoder;
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
u32 pfit_control = 0, pfit_pgm_ratios = 0;
int left_border = 0, right_border = 0, top_border = 0;
int bottom_border = 0;
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
/*
* The LVDS pin pair will already have been turned on in the
I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
-/* Some lid devices report incorrect lid status, assume they're connected */
-static const struct dmi_system_id bad_lid_status[] = {
- {
- .ident = "Compaq nx9020",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_BOARD_NAME, "3084"),
- },
- },
- {
- .ident = "Samsung SX20S",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
- DMI_MATCH(DMI_BOARD_NAME, "SX20S"),
- },
- },
- {
- .ident = "Aspire One",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
- },
- },
- {
- .ident = "Aspire 1810T",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1810T"),
- },
- },
- {
- .ident = "PC-81005",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "MALATA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "PC-81005"),
- },
- },
- {
- .ident = "Clevo M5x0N",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
- DMI_MATCH(DMI_BOARD_NAME, "M5x0N"),
- },
- },
- { }
-};
-
/**
* Detect the LVDS connection.
*
/* ACPI lid methods were generally unreliable in this generation, so
* don't even bother.
*/
- if (IS_GEN2(dev))
+ if (IS_GEN2(dev) || IS_GEN3(dev))
return connector_status_connected;
- if (!dmi_check_system(bad_lid_status) && !acpi_lid_open())
- status = connector_status_disconnected;
-
return status;
}
static int intel_lvds_get_modes(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
- ret = intel_ddc_get_modes(intel_output);
+ if (dev_priv->lvds_edid_good) {
+ ret = intel_ddc_get_modes(intel_encoder);
- if (ret)
- return ret;
+ if (ret)
+ return ret;
+ }
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes
static void intel_lvds_destroy(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
struct drm_i915_private *dev_priv = dev->dev_private;
- if (intel_output->ddc_bus)
- intel_i2c_destroy(intel_output->ddc_bus);
+ if (intel_encoder->ddc_bus)
+ intel_i2c_destroy(intel_encoder->ddc_bus);
if (dev_priv->lid_notifier.notifier_call)
acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
uint64_t value)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output =
- to_intel_output(connector);
+ struct intel_encoder *intel_encoder =
+ to_intel_encoder(connector);
if (property == dev->mode_config.scaling_mode_property &&
connector->encoder) {
struct drm_crtc *crtc = connector->encoder->crtc;
- struct intel_lvds_priv *lvds_priv = intel_output->dev_priv;
+ struct intel_lvds_priv *lvds_priv = intel_encoder->dev_priv;
if (value == DRM_MODE_SCALE_NONE) {
DRM_DEBUG_KMS("no scaling not supported\n");
return 0;
DMI_MATCH(DMI_PRODUCT_VERSION, "AO00001JW"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Clientron U800",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Clientron"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "U800"),
+ },
+ },
{ } /* terminating entry */
};
void intel_lvds_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct drm_connector *connector;
struct drm_encoder *encoder;
struct drm_display_mode *scan; /* *modes, *bios_mode; */
gpio = PCH_GPIOC;
}
- intel_output = kzalloc(sizeof(struct intel_output) +
+ intel_encoder = kzalloc(sizeof(struct intel_encoder) +
sizeof(struct intel_lvds_priv), GFP_KERNEL);
- if (!intel_output) {
+ if (!intel_encoder) {
return;
}
- connector = &intel_output->base;
- encoder = &intel_output->enc;
- drm_connector_init(dev, &intel_output->base, &intel_lvds_connector_funcs,
+ connector = &intel_encoder->base;
+ encoder = &intel_encoder->enc;
+ drm_connector_init(dev, &intel_encoder->base, &intel_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
- drm_encoder_init(dev, &intel_output->enc, &intel_lvds_enc_funcs,
+ drm_encoder_init(dev, &intel_encoder->enc, &intel_lvds_enc_funcs,
DRM_MODE_ENCODER_LVDS);
- drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
- intel_output->type = INTEL_OUTPUT_LVDS;
+ drm_mode_connector_attach_encoder(&intel_encoder->base, &intel_encoder->enc);
+ intel_encoder->type = INTEL_OUTPUT_LVDS;
- intel_output->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
- intel_output->crtc_mask = (1 << 1);
+ intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
+ intel_encoder->crtc_mask = (1 << 1);
drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
- lvds_priv = (struct intel_lvds_priv *)(intel_output + 1);
- intel_output->dev_priv = lvds_priv;
+ lvds_priv = (struct intel_lvds_priv *)(intel_encoder + 1);
+ intel_encoder->dev_priv = lvds_priv;
/* create the scaling mode property */
drm_mode_create_scaling_mode_property(dev);
/*
* the initial panel fitting mode will be FULL_SCREEN.
*/
- drm_connector_attach_property(&intel_output->base,
+ drm_connector_attach_property(&intel_encoder->base,
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
lvds_priv->fitting_mode = DRM_MODE_SCALE_FULLSCREEN;
*/
/* Set up the DDC bus. */
- intel_output->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C");
- if (!intel_output->ddc_bus) {
+ intel_encoder->ddc_bus = intel_i2c_create(dev, gpio, "LVDSDDC_C");
+ if (!intel_encoder->ddc_bus) {
dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
"failed.\n");
goto failed;
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
- intel_ddc_get_modes(intel_output);
+ dev_priv->lvds_edid_good = true;
+
+ if (!intel_ddc_get_modes(intel_encoder))
+ dev_priv->lvds_edid_good = false;
list_for_each_entry(scan, &connector->probed_modes, head) {
mutex_lock(&dev->mode_config.mutex);
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
- if (intel_output->ddc_bus)
- intel_i2c_destroy(intel_output->ddc_bus);
+ if (intel_encoder->ddc_bus)
+ intel_i2c_destroy(intel_encoder->ddc_bus);
drm_connector_cleanup(connector);
drm_encoder_cleanup(encoder);
- kfree(intel_output);
+ kfree(intel_encoder);
}
* DEALINGS IN THE SOFTWARE.
*/
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/fb.h>
#include "drmP.h"
* intel_ddc_probe
*
*/
-bool intel_ddc_probe(struct intel_output *intel_output)
+bool intel_ddc_probe(struct intel_encoder *intel_encoder)
{
u8 out_buf[] = { 0x0, 0x0};
u8 buf[2];
}
};
- intel_i2c_quirk_set(intel_output->base.dev, true);
- ret = i2c_transfer(intel_output->ddc_bus, msgs, 2);
- intel_i2c_quirk_set(intel_output->base.dev, false);
+ intel_i2c_quirk_set(intel_encoder->base.dev, true);
+ ret = i2c_transfer(intel_encoder->ddc_bus, msgs, 2);
+ intel_i2c_quirk_set(intel_encoder->base.dev, false);
if (ret == 2)
return true;
*
* Fetch the EDID information from @connector using the DDC bus.
*/
-int intel_ddc_get_modes(struct intel_output *intel_output)
+int intel_ddc_get_modes(struct intel_encoder *intel_encoder)
{
struct edid *edid;
int ret = 0;
- intel_i2c_quirk_set(intel_output->base.dev, true);
- edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus);
- intel_i2c_quirk_set(intel_output->base.dev, false);
+ intel_i2c_quirk_set(intel_encoder->base.dev, true);
+ edid = drm_get_edid(&intel_encoder->base, intel_encoder->ddc_bus);
+ intel_i2c_quirk_set(intel_encoder->base.dev, false);
if (edid) {
- drm_mode_connector_update_edid_property(&intel_output->base,
+ drm_mode_connector_update_edid_property(&intel_encoder->base,
edid);
- ret = drm_add_edid_modes(&intel_output->base, edid);
- intel_output->base.display_info.raw_edid = NULL;
+ ret = drm_add_edid_modes(&intel_encoder->base, edid);
+ intel_encoder->base.display_info.raw_edid = NULL;
kfree(edid);
}
int ret, tmp_width;
struct overlay_registers *regs;
bool scale_changed = false;
- struct drm_i915_gem_object *bo_priv = new_bo->driver_private;
+ struct drm_i915_gem_object *bo_priv = to_intel_bo(new_bo);
struct drm_device *dev = overlay->dev;
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
intel_overlay_continue(overlay, scale_changed);
overlay->old_vid_bo = overlay->vid_bo;
- overlay->vid_bo = new_bo->driver_private;
+ overlay->vid_bo = to_intel_bo(new_bo);
return 0;
drmmode_obj = drm_mode_object_find(dev, put_image_rec->crtc_id,
DRM_MODE_OBJECT_CRTC);
- if (!drmmode_obj)
- return -ENOENT;
+ if (!drmmode_obj) {
+ ret = -ENOENT;
+ goto out_free;
+ }
crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
new_bo = drm_gem_object_lookup(dev, file_priv,
put_image_rec->bo_handle);
- if (!new_bo)
- return -ENOENT;
+ if (!new_bo) {
+ ret = -ENOENT;
+ goto out_free;
+ }
mutex_lock(&dev->mode_config.mutex);
mutex_lock(&dev->struct_mutex);
mutex_unlock(&dev->struct_mutex);
mutex_unlock(&dev->mode_config.mutex);
drm_gem_object_unreference_unlocked(new_bo);
+out_free:
kfree(params);
return ret;
reg_bo = drm_gem_object_alloc(dev, PAGE_SIZE);
if (!reg_bo)
goto out_free;
- overlay->reg_bo = reg_bo->driver_private;
+ overlay->reg_bo = to_intel_bo(reg_bo);
if (OVERLAY_NONPHYSICAL(dev)) {
ret = i915_gem_object_pin(reg_bo, PAGE_SIZE);
* Eric Anholt <eric@anholt.net>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "drmP.h"
#include "drm.h"
u8 slave_addr;
/* Register for the SDVO device: SDVOB or SDVOC */
- int output_device;
+ int sdvo_reg;
/* Active outputs controlled by this SDVO output */
uint16_t controlled_output;
*/
struct intel_sdvo_encode encode;
- /* DDC bus used by this SDVO output */
+ /* DDC bus used by this SDVO encoder */
uint8_t ddc_bus;
/* Mac mini hack -- use the same DDC as the analog connector */
};
static bool
-intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags);
+intel_sdvo_output_setup(struct intel_encoder *intel_encoder, uint16_t flags);
/**
* Writes the SDVOB or SDVOC with the given value, but always writes both
* SDVOB and SDVOC to work around apparent hardware issues (according to
* comments in the BIOS).
*/
-static void intel_sdvo_write_sdvox(struct intel_output *intel_output, u32 val)
+static void intel_sdvo_write_sdvox(struct intel_encoder *intel_encoder, u32 val)
{
- struct drm_device *dev = intel_output->base.dev;
+ struct drm_device *dev = intel_encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
u32 bval = val, cval = val;
int i;
- if (sdvo_priv->output_device == SDVOB) {
+ if (sdvo_priv->sdvo_reg == SDVOB) {
cval = I915_READ(SDVOC);
} else {
bval = I915_READ(SDVOB);
}
}
-static bool intel_sdvo_read_byte(struct intel_output *intel_output, u8 addr,
+static bool intel_sdvo_read_byte(struct intel_encoder *intel_encoder, u8 addr,
u8 *ch)
{
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
u8 out_buf[2];
u8 buf[2];
int ret;
out_buf[0] = addr;
out_buf[1] = 0;
- if ((ret = i2c_transfer(intel_output->i2c_bus, msgs, 2)) == 2)
+ if ((ret = i2c_transfer(intel_encoder->i2c_bus, msgs, 2)) == 2)
{
*ch = buf[0];
return true;
return false;
}
-static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr,
+static bool intel_sdvo_write_byte(struct intel_encoder *intel_encoder, int addr,
u8 ch)
{
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
u8 out_buf[2];
struct i2c_msg msgs[] = {
{
out_buf[0] = addr;
out_buf[1] = ch;
- if (i2c_transfer(intel_output->i2c_bus, msgs, 1) == 1)
+ if (i2c_transfer(intel_encoder->i2c_bus, msgs, 1) == 1)
{
return true;
}
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA),
};
-#define SDVO_NAME(dev_priv) ((dev_priv)->output_device == SDVOB ? "SDVOB" : "SDVOC")
-#define SDVO_PRIV(output) ((struct intel_sdvo_priv *) (output)->dev_priv)
+#define SDVO_NAME(dev_priv) ((dev_priv)->sdvo_reg == SDVOB ? "SDVOB" : "SDVOC")
+#define SDVO_PRIV(encoder) ((struct intel_sdvo_priv *) (encoder)->dev_priv)
-static void intel_sdvo_debug_write(struct intel_output *intel_output, u8 cmd,
+static void intel_sdvo_debug_write(struct intel_encoder *intel_encoder, u8 cmd,
void *args, int args_len)
{
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
int i;
DRM_DEBUG_KMS("%s: W: %02X ",
DRM_LOG_KMS("\n");
}
-static void intel_sdvo_write_cmd(struct intel_output *intel_output, u8 cmd,
+static void intel_sdvo_write_cmd(struct intel_encoder *intel_encoder, u8 cmd,
void *args, int args_len)
{
int i;
- intel_sdvo_debug_write(intel_output, cmd, args, args_len);
+ intel_sdvo_debug_write(intel_encoder, cmd, args, args_len);
for (i = 0; i < args_len; i++) {
- intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0 - i,
+ intel_sdvo_write_byte(intel_encoder, SDVO_I2C_ARG_0 - i,
((u8*)args)[i]);
}
- intel_sdvo_write_byte(intel_output, SDVO_I2C_OPCODE, cmd);
+ intel_sdvo_write_byte(intel_encoder, SDVO_I2C_OPCODE, cmd);
}
static const char *cmd_status_names[] = {
"Scaling not supported"
};
-static void intel_sdvo_debug_response(struct intel_output *intel_output,
+static void intel_sdvo_debug_response(struct intel_encoder *intel_encoder,
void *response, int response_len,
u8 status)
{
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
int i;
DRM_DEBUG_KMS("%s: R: ", SDVO_NAME(sdvo_priv));
DRM_LOG_KMS("\n");
}
-static u8 intel_sdvo_read_response(struct intel_output *intel_output,
+static u8 intel_sdvo_read_response(struct intel_encoder *intel_encoder,
void *response, int response_len)
{
int i;
while (retry--) {
/* Read the command response */
for (i = 0; i < response_len; i++) {
- intel_sdvo_read_byte(intel_output,
+ intel_sdvo_read_byte(intel_encoder,
SDVO_I2C_RETURN_0 + i,
&((u8 *)response)[i]);
}
/* read the return status */
- intel_sdvo_read_byte(intel_output, SDVO_I2C_CMD_STATUS,
+ intel_sdvo_read_byte(intel_encoder, SDVO_I2C_CMD_STATUS,
&status);
- intel_sdvo_debug_response(intel_output, response, response_len,
+ intel_sdvo_debug_response(intel_encoder, response, response_len,
status);
if (status != SDVO_CMD_STATUS_PENDING)
return status;
* another I2C transaction after issuing the DDC bus switch, it will be
* switched to the internal SDVO register.
*/
-static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output,
+static void intel_sdvo_set_control_bus_switch(struct intel_encoder *intel_encoder,
u8 target)
{
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
u8 out_buf[2], cmd_buf[2], ret_value[2], ret;
struct i2c_msg msgs[] = {
{
},
};
- intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
+ intel_sdvo_debug_write(intel_encoder, SDVO_CMD_SET_CONTROL_BUS_SWITCH,
&target, 1);
/* write the DDC switch command argument */
- intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target);
+ intel_sdvo_write_byte(intel_encoder, SDVO_I2C_ARG_0, target);
out_buf[0] = SDVO_I2C_OPCODE;
out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH;
ret_value[0] = 0;
ret_value[1] = 0;
- ret = i2c_transfer(intel_output->i2c_bus, msgs, 3);
+ ret = i2c_transfer(intel_encoder->i2c_bus, msgs, 3);
if (ret != 3) {
/* failure in I2C transfer */
DRM_DEBUG_KMS("I2c transfer returned %d\n", ret);
return;
}
-static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1)
+static bool intel_sdvo_set_target_input(struct intel_encoder *intel_encoder, bool target_0, bool target_1)
{
struct intel_sdvo_set_target_input_args targets = {0};
u8 status;
if (target_1)
targets.target_1 = 1;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_INPUT, &targets,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_TARGET_INPUT, &targets,
sizeof(targets));
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
return (status == SDVO_CMD_STATUS_SUCCESS);
}
* This function is making an assumption about the layout of the response,
* which should be checked against the docs.
*/
-static bool intel_sdvo_get_trained_inputs(struct intel_output *intel_output, bool *input_1, bool *input_2)
+static bool intel_sdvo_get_trained_inputs(struct intel_encoder *intel_encoder, bool *input_1, bool *input_2)
{
struct intel_sdvo_get_trained_inputs_response response;
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0);
- status = intel_sdvo_read_response(intel_output, &response, sizeof(response));
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_TRAINED_INPUTS, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, &response, sizeof(response));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
return true;
}
-static bool intel_sdvo_get_active_outputs(struct intel_output *intel_output,
+static bool intel_sdvo_get_active_outputs(struct intel_encoder *intel_encoder,
u16 *outputs)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0);
- status = intel_sdvo_read_response(intel_output, outputs, sizeof(*outputs));
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_ACTIVE_OUTPUTS, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, outputs, sizeof(*outputs));
return (status == SDVO_CMD_STATUS_SUCCESS);
}
-static bool intel_sdvo_set_active_outputs(struct intel_output *intel_output,
+static bool intel_sdvo_set_active_outputs(struct intel_encoder *intel_encoder,
u16 outputs)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_ACTIVE_OUTPUTS, &outputs,
sizeof(outputs));
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
return (status == SDVO_CMD_STATUS_SUCCESS);
}
-static bool intel_sdvo_set_encoder_power_state(struct intel_output *intel_output,
+static bool intel_sdvo_set_encoder_power_state(struct intel_encoder *intel_encoder,
int mode)
{
u8 status, state = SDVO_ENCODER_STATE_ON;
break;
}
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ENCODER_POWER_STATE, &state,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_ENCODER_POWER_STATE, &state,
sizeof(state));
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
return (status == SDVO_CMD_STATUS_SUCCESS);
}
-static bool intel_sdvo_get_input_pixel_clock_range(struct intel_output *intel_output,
+static bool intel_sdvo_get_input_pixel_clock_range(struct intel_encoder *intel_encoder,
int *clock_min,
int *clock_max)
{
struct intel_sdvo_pixel_clock_range clocks;
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE,
NULL, 0);
- status = intel_sdvo_read_response(intel_output, &clocks, sizeof(clocks));
+ status = intel_sdvo_read_response(intel_encoder, &clocks, sizeof(clocks));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
return true;
}
-static bool intel_sdvo_set_target_output(struct intel_output *intel_output,
+static bool intel_sdvo_set_target_output(struct intel_encoder *intel_encoder,
u16 outputs)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_TARGET_OUTPUT, &outputs,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_TARGET_OUTPUT, &outputs,
sizeof(outputs));
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
return (status == SDVO_CMD_STATUS_SUCCESS);
}
-static bool intel_sdvo_get_timing(struct intel_output *intel_output, u8 cmd,
+static bool intel_sdvo_get_timing(struct intel_encoder *intel_encoder, u8 cmd,
struct intel_sdvo_dtd *dtd)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, cmd, NULL, 0);
- status = intel_sdvo_read_response(intel_output, &dtd->part1,
+ intel_sdvo_write_cmd(intel_encoder, cmd, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, &dtd->part1,
sizeof(dtd->part1));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
- intel_sdvo_write_cmd(intel_output, cmd + 1, NULL, 0);
- status = intel_sdvo_read_response(intel_output, &dtd->part2,
+ intel_sdvo_write_cmd(intel_encoder, cmd + 1, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, &dtd->part2,
sizeof(dtd->part2));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
return true;
}
-static bool intel_sdvo_get_input_timing(struct intel_output *intel_output,
+static bool intel_sdvo_get_input_timing(struct intel_encoder *intel_encoder,
struct intel_sdvo_dtd *dtd)
{
- return intel_sdvo_get_timing(intel_output,
+ return intel_sdvo_get_timing(intel_encoder,
SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd);
}
-static bool intel_sdvo_get_output_timing(struct intel_output *intel_output,
+static bool intel_sdvo_get_output_timing(struct intel_encoder *intel_encoder,
struct intel_sdvo_dtd *dtd)
{
- return intel_sdvo_get_timing(intel_output,
+ return intel_sdvo_get_timing(intel_encoder,
SDVO_CMD_GET_OUTPUT_TIMINGS_PART1, dtd);
}
-static bool intel_sdvo_set_timing(struct intel_output *intel_output, u8 cmd,
+static bool intel_sdvo_set_timing(struct intel_encoder *intel_encoder, u8 cmd,
struct intel_sdvo_dtd *dtd)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, cmd, &dtd->part1, sizeof(dtd->part1));
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ intel_sdvo_write_cmd(intel_encoder, cmd, &dtd->part1, sizeof(dtd->part1));
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
- intel_sdvo_write_cmd(intel_output, cmd + 1, &dtd->part2, sizeof(dtd->part2));
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ intel_sdvo_write_cmd(intel_encoder, cmd + 1, &dtd->part2, sizeof(dtd->part2));
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
return true;
}
-static bool intel_sdvo_set_input_timing(struct intel_output *intel_output,
+static bool intel_sdvo_set_input_timing(struct intel_encoder *intel_encoder,
struct intel_sdvo_dtd *dtd)
{
- return intel_sdvo_set_timing(intel_output,
+ return intel_sdvo_set_timing(intel_encoder,
SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd);
}
-static bool intel_sdvo_set_output_timing(struct intel_output *intel_output,
+static bool intel_sdvo_set_output_timing(struct intel_encoder *intel_encoder,
struct intel_sdvo_dtd *dtd)
{
- return intel_sdvo_set_timing(intel_output,
+ return intel_sdvo_set_timing(intel_encoder,
SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd);
}
static bool
-intel_sdvo_create_preferred_input_timing(struct intel_output *output,
+intel_sdvo_create_preferred_input_timing(struct intel_encoder *intel_encoder,
uint16_t clock,
uint16_t width,
uint16_t height)
{
struct intel_sdvo_preferred_input_timing_args args;
- struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
uint8_t status;
memset(&args, 0, sizeof(args));
sdvo_priv->sdvo_lvds_fixed_mode->vdisplay != height))
args.scaled = 1;
- intel_sdvo_write_cmd(output, SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
+ intel_sdvo_write_cmd(intel_encoder,
+ SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING,
&args, sizeof(args));
- status = intel_sdvo_read_response(output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
return true;
}
-static bool intel_sdvo_get_preferred_input_timing(struct intel_output *output,
+static bool intel_sdvo_get_preferred_input_timing(struct intel_encoder *intel_encoder,
struct intel_sdvo_dtd *dtd)
{
bool status;
- intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1,
NULL, 0);
- status = intel_sdvo_read_response(output, &dtd->part1,
+ status = intel_sdvo_read_response(intel_encoder, &dtd->part1,
sizeof(dtd->part1));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
- intel_sdvo_write_cmd(output, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2,
NULL, 0);
- status = intel_sdvo_read_response(output, &dtd->part2,
+ status = intel_sdvo_read_response(intel_encoder, &dtd->part2,
sizeof(dtd->part2));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
return false;
}
-static int intel_sdvo_get_clock_rate_mult(struct intel_output *intel_output)
+static int intel_sdvo_get_clock_rate_mult(struct intel_encoder *intel_encoder)
{
u8 response, status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0);
- status = intel_sdvo_read_response(intel_output, &response, 1);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_CLOCK_RATE_MULT, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, &response, 1);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Couldn't get SDVO clock rate multiplier\n");
return response;
}
-static bool intel_sdvo_set_clock_rate_mult(struct intel_output *intel_output, u8 val)
+static bool intel_sdvo_set_clock_rate_mult(struct intel_encoder *intel_encoder, u8 val)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1);
- status = intel_sdvo_read_response(intel_output, NULL, 0);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
mode->flags |= DRM_MODE_FLAG_PVSYNC;
}
-static bool intel_sdvo_get_supp_encode(struct intel_output *output,
+static bool intel_sdvo_get_supp_encode(struct intel_encoder *intel_encoder,
struct intel_sdvo_encode *encode)
{
uint8_t status;
- intel_sdvo_write_cmd(output, SDVO_CMD_GET_SUPP_ENCODE, NULL, 0);
- status = intel_sdvo_read_response(output, encode, sizeof(*encode));
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_SUPP_ENCODE, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, encode, sizeof(*encode));
if (status != SDVO_CMD_STATUS_SUCCESS) { /* non-support means DVI */
memset(encode, 0, sizeof(*encode));
return false;
return true;
}
-static bool intel_sdvo_set_encode(struct intel_output *output, uint8_t mode)
+static bool intel_sdvo_set_encode(struct intel_encoder *intel_encoder,
+ uint8_t mode)
{
uint8_t status;
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_ENCODE, &mode, 1);
- status = intel_sdvo_read_response(output, NULL, 0);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_ENCODE, &mode, 1);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
return (status == SDVO_CMD_STATUS_SUCCESS);
}
-static bool intel_sdvo_set_colorimetry(struct intel_output *output,
+static bool intel_sdvo_set_colorimetry(struct intel_encoder *intel_encoder,
uint8_t mode)
{
uint8_t status;
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_COLORIMETRY, &mode, 1);
- status = intel_sdvo_read_response(output, NULL, 0);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_COLORIMETRY, &mode, 1);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
return (status == SDVO_CMD_STATUS_SUCCESS);
}
#if 0
-static void intel_sdvo_dump_hdmi_buf(struct intel_output *output)
+static void intel_sdvo_dump_hdmi_buf(struct intel_encoder *intel_encoder)
{
int i, j;
uint8_t set_buf_index[2];
uint8_t buf[48];
uint8_t *pos;
- intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_AV_SPLIT, NULL, 0);
- intel_sdvo_read_response(output, &av_split, 1);
+ intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_AV_SPLIT, NULL, 0);
+ intel_sdvo_read_response(encoder, &av_split, 1);
for (i = 0; i <= av_split; i++) {
set_buf_index[0] = i; set_buf_index[1] = 0;
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX,
+ intel_sdvo_write_cmd(encoder, SDVO_CMD_SET_HBUF_INDEX,
set_buf_index, 2);
- intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_INFO, NULL, 0);
- intel_sdvo_read_response(output, &buf_size, 1);
+ intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_INFO, NULL, 0);
+ intel_sdvo_read_response(encoder, &buf_size, 1);
pos = buf;
for (j = 0; j <= buf_size; j += 8) {
- intel_sdvo_write_cmd(output, SDVO_CMD_GET_HBUF_DATA,
+ intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_DATA,
NULL, 0);
- intel_sdvo_read_response(output, pos, 8);
+ intel_sdvo_read_response(encoder, pos, 8);
pos += 8;
}
}
}
#endif
-static void intel_sdvo_set_hdmi_buf(struct intel_output *output, int index,
- uint8_t *data, int8_t size, uint8_t tx_rate)
+static void intel_sdvo_set_hdmi_buf(struct intel_encoder *intel_encoder,
+ int index,
+ uint8_t *data, int8_t size, uint8_t tx_rate)
{
uint8_t set_buf_index[2];
set_buf_index[0] = index;
set_buf_index[1] = 0;
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_INDEX, set_buf_index, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_HBUF_INDEX,
+ set_buf_index, 2);
for (; size > 0; size -= 8) {
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_DATA, data, 8);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_HBUF_DATA, data, 8);
data += 8;
}
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_HBUF_TXRATE, &tx_rate, 1);
}
static uint8_t intel_sdvo_calc_hbuf_csum(uint8_t *data, uint8_t size)
} __attribute__ ((packed)) u;
} __attribute__((packed));
-static void intel_sdvo_set_avi_infoframe(struct intel_output *output,
+static void intel_sdvo_set_avi_infoframe(struct intel_encoder *intel_encoder,
struct drm_display_mode * mode)
{
struct dip_infoframe avi_if = {
avi_if.checksum = intel_sdvo_calc_hbuf_csum((uint8_t *)&avi_if,
4 + avi_if.len);
- intel_sdvo_set_hdmi_buf(output, 1, (uint8_t *)&avi_if, 4 + avi_if.len,
+ intel_sdvo_set_hdmi_buf(intel_encoder, 1, (uint8_t *)&avi_if,
+ 4 + avi_if.len,
SDVO_HBUF_TX_VSYNC);
}
-static void intel_sdvo_set_tv_format(struct intel_output *output)
+static void intel_sdvo_set_tv_format(struct intel_encoder *intel_encoder)
{
struct intel_sdvo_tv_format format;
- struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
uint32_t format_map, i;
uint8_t status;
memcpy(&format, &format_map, sizeof(format_map) > sizeof(format) ?
sizeof(format) : sizeof(format_map));
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_TV_FORMAT, &format_map,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_TV_FORMAT, &format_map,
sizeof(format));
- status = intel_sdvo_read_response(output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
DRM_DEBUG_KMS("%s: Failed to set TV format\n",
SDVO_NAME(sdvo_priv));
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct intel_output *output = enc_to_intel_output(encoder);
- struct intel_sdvo_priv *dev_priv = output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_sdvo_priv *dev_priv = intel_encoder->dev_priv;
if (dev_priv->is_tv) {
struct intel_sdvo_dtd output_dtd;
/* Set output timings */
intel_sdvo_get_dtd_from_mode(&output_dtd, mode);
- intel_sdvo_set_target_output(output,
+ intel_sdvo_set_target_output(intel_encoder,
dev_priv->controlled_output);
- intel_sdvo_set_output_timing(output, &output_dtd);
+ intel_sdvo_set_output_timing(intel_encoder, &output_dtd);
/* Set the input timing to the screen. Assume always input 0. */
- intel_sdvo_set_target_input(output, true, false);
+ intel_sdvo_set_target_input(intel_encoder, true, false);
- success = intel_sdvo_create_preferred_input_timing(output,
+ success = intel_sdvo_create_preferred_input_timing(intel_encoder,
mode->clock / 10,
mode->hdisplay,
mode->vdisplay);
if (success) {
struct intel_sdvo_dtd input_dtd;
- intel_sdvo_get_preferred_input_timing(output,
+ intel_sdvo_get_preferred_input_timing(intel_encoder,
&input_dtd);
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
intel_sdvo_get_dtd_from_mode(&output_dtd,
dev_priv->sdvo_lvds_fixed_mode);
- intel_sdvo_set_target_output(output,
+ intel_sdvo_set_target_output(intel_encoder,
dev_priv->controlled_output);
- intel_sdvo_set_output_timing(output, &output_dtd);
+ intel_sdvo_set_output_timing(intel_encoder, &output_dtd);
/* Set the input timing to the screen. Assume always input 0. */
- intel_sdvo_set_target_input(output, true, false);
+ intel_sdvo_set_target_input(intel_encoder, true, false);
success = intel_sdvo_create_preferred_input_timing(
- output,
+ intel_encoder,
mode->clock / 10,
mode->hdisplay,
mode->vdisplay);
if (success) {
struct intel_sdvo_dtd input_dtd;
- intel_sdvo_get_preferred_input_timing(output,
+ intel_sdvo_get_preferred_input_timing(intel_encoder,
&input_dtd);
intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd);
dev_priv->sdvo_flags = input_dtd.part2.sdvo_flags;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_output *output = enc_to_intel_output(encoder);
- struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
u32 sdvox = 0;
int sdvo_pixel_multiply;
struct intel_sdvo_in_out_map in_out;
in_out.in0 = sdvo_priv->controlled_output;
in_out.in1 = 0;
- intel_sdvo_write_cmd(output, SDVO_CMD_SET_IN_OUT_MAP,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_IN_OUT_MAP,
&in_out, sizeof(in_out));
- status = intel_sdvo_read_response(output, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, NULL, 0);
if (sdvo_priv->is_hdmi) {
- intel_sdvo_set_avi_infoframe(output, mode);
+ intel_sdvo_set_avi_infoframe(intel_encoder, mode);
sdvox |= SDVO_AUDIO_ENABLE;
}
*/
if (!sdvo_priv->is_tv && !sdvo_priv->is_lvds) {
/* Set the output timing to the screen */
- intel_sdvo_set_target_output(output,
+ intel_sdvo_set_target_output(intel_encoder,
sdvo_priv->controlled_output);
- intel_sdvo_set_output_timing(output, &input_dtd);
+ intel_sdvo_set_output_timing(intel_encoder, &input_dtd);
}
/* Set the input timing to the screen. Assume always input 0. */
- intel_sdvo_set_target_input(output, true, false);
+ intel_sdvo_set_target_input(intel_encoder, true, false);
if (sdvo_priv->is_tv)
- intel_sdvo_set_tv_format(output);
+ intel_sdvo_set_tv_format(intel_encoder);
/* We would like to use intel_sdvo_create_preferred_input_timing() to
* provide the device with a timing it can support, if it supports that
* output the preferred timing, and we don't support that currently.
*/
#if 0
- success = intel_sdvo_create_preferred_input_timing(output, clock,
+ success = intel_sdvo_create_preferred_input_timing(encoder, clock,
width, height);
if (success) {
struct intel_sdvo_dtd *input_dtd;
- intel_sdvo_get_preferred_input_timing(output, &input_dtd);
- intel_sdvo_set_input_timing(output, &input_dtd);
+ intel_sdvo_get_preferred_input_timing(encoder, &input_dtd);
+ intel_sdvo_set_input_timing(encoder, &input_dtd);
}
#else
- intel_sdvo_set_input_timing(output, &input_dtd);
+ intel_sdvo_set_input_timing(intel_encoder, &input_dtd);
#endif
switch (intel_sdvo_get_pixel_multiplier(mode)) {
case 1:
- intel_sdvo_set_clock_rate_mult(output,
+ intel_sdvo_set_clock_rate_mult(intel_encoder,
SDVO_CLOCK_RATE_MULT_1X);
break;
case 2:
- intel_sdvo_set_clock_rate_mult(output,
+ intel_sdvo_set_clock_rate_mult(intel_encoder,
SDVO_CLOCK_RATE_MULT_2X);
break;
case 4:
- intel_sdvo_set_clock_rate_mult(output,
+ intel_sdvo_set_clock_rate_mult(intel_encoder,
SDVO_CLOCK_RATE_MULT_4X);
break;
}
SDVO_VSYNC_ACTIVE_HIGH |
SDVO_HSYNC_ACTIVE_HIGH;
} else {
- sdvox |= I915_READ(sdvo_priv->output_device);
- switch (sdvo_priv->output_device) {
+ sdvox |= I915_READ(sdvo_priv->sdvo_reg);
+ switch (sdvo_priv->sdvo_reg) {
case SDVOB:
sdvox &= SDVOB_PRESERVE_MASK;
break;
if (sdvo_priv->sdvo_flags & SDVO_NEED_TO_STALL)
sdvox |= SDVO_STALL_SELECT;
- intel_sdvo_write_sdvox(output, sdvox);
+ intel_sdvo_write_sdvox(intel_encoder, sdvox);
}
static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
u32 temp;
if (mode != DRM_MODE_DPMS_ON) {
- intel_sdvo_set_active_outputs(intel_output, 0);
+ intel_sdvo_set_active_outputs(intel_encoder, 0);
if (0)
- intel_sdvo_set_encoder_power_state(intel_output, mode);
+ intel_sdvo_set_encoder_power_state(intel_encoder, mode);
if (mode == DRM_MODE_DPMS_OFF) {
- temp = I915_READ(sdvo_priv->output_device);
+ temp = I915_READ(sdvo_priv->sdvo_reg);
if ((temp & SDVO_ENABLE) != 0) {
- intel_sdvo_write_sdvox(intel_output, temp & ~SDVO_ENABLE);
+ intel_sdvo_write_sdvox(intel_encoder, temp & ~SDVO_ENABLE);
}
}
} else {
int i;
u8 status;
- temp = I915_READ(sdvo_priv->output_device);
+ temp = I915_READ(sdvo_priv->sdvo_reg);
if ((temp & SDVO_ENABLE) == 0)
- intel_sdvo_write_sdvox(intel_output, temp | SDVO_ENABLE);
+ intel_sdvo_write_sdvox(intel_encoder, temp | SDVO_ENABLE);
for (i = 0; i < 2; i++)
intel_wait_for_vblank(dev);
- status = intel_sdvo_get_trained_inputs(intel_output, &input1,
+ status = intel_sdvo_get_trained_inputs(intel_encoder, &input1,
&input2);
}
if (0)
- intel_sdvo_set_encoder_power_state(intel_output, mode);
- intel_sdvo_set_active_outputs(intel_output, sdvo_priv->controlled_output);
+ intel_sdvo_set_encoder_power_state(intel_encoder, mode);
+ intel_sdvo_set_active_outputs(intel_encoder, sdvo_priv->controlled_output);
}
return;
}
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
int o;
- sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(intel_output);
- intel_sdvo_get_active_outputs(intel_output, &sdvo_priv->save_active_outputs);
+ sdvo_priv->save_sdvo_mult = intel_sdvo_get_clock_rate_mult(intel_encoder);
+ intel_sdvo_get_active_outputs(intel_encoder, &sdvo_priv->save_active_outputs);
if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
- intel_sdvo_set_target_input(intel_output, true, false);
- intel_sdvo_get_input_timing(intel_output,
+ intel_sdvo_set_target_input(intel_encoder, true, false);
+ intel_sdvo_get_input_timing(intel_encoder,
&sdvo_priv->save_input_dtd_1);
}
if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
- intel_sdvo_set_target_input(intel_output, false, true);
- intel_sdvo_get_input_timing(intel_output,
+ intel_sdvo_set_target_input(intel_encoder, false, true);
+ intel_sdvo_get_input_timing(intel_encoder,
&sdvo_priv->save_input_dtd_2);
}
u16 this_output = (1 << o);
if (sdvo_priv->caps.output_flags & this_output)
{
- intel_sdvo_set_target_output(intel_output, this_output);
- intel_sdvo_get_output_timing(intel_output,
+ intel_sdvo_set_target_output(intel_encoder, this_output);
+ intel_sdvo_get_output_timing(intel_encoder,
&sdvo_priv->save_output_dtd[o]);
}
}
/* XXX: Save TV format/enhancements. */
}
- sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->output_device);
+ sdvo_priv->save_SDVOX = I915_READ(sdvo_priv->sdvo_reg);
}
static void intel_sdvo_restore(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
int o;
int i;
bool input1, input2;
u8 status;
- intel_sdvo_set_active_outputs(intel_output, 0);
+ intel_sdvo_set_active_outputs(intel_encoder, 0);
for (o = SDVO_OUTPUT_FIRST; o <= SDVO_OUTPUT_LAST; o++)
{
u16 this_output = (1 << o);
if (sdvo_priv->caps.output_flags & this_output) {
- intel_sdvo_set_target_output(intel_output, this_output);
- intel_sdvo_set_output_timing(intel_output, &sdvo_priv->save_output_dtd[o]);
+ intel_sdvo_set_target_output(intel_encoder, this_output);
+ intel_sdvo_set_output_timing(intel_encoder, &sdvo_priv->save_output_dtd[o]);
}
}
if (sdvo_priv->caps.sdvo_inputs_mask & 0x1) {
- intel_sdvo_set_target_input(intel_output, true, false);
- intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_1);
+ intel_sdvo_set_target_input(intel_encoder, true, false);
+ intel_sdvo_set_input_timing(intel_encoder, &sdvo_priv->save_input_dtd_1);
}
if (sdvo_priv->caps.sdvo_inputs_mask & 0x2) {
- intel_sdvo_set_target_input(intel_output, false, true);
- intel_sdvo_set_input_timing(intel_output, &sdvo_priv->save_input_dtd_2);
+ intel_sdvo_set_target_input(intel_encoder, false, true);
+ intel_sdvo_set_input_timing(intel_encoder, &sdvo_priv->save_input_dtd_2);
}
- intel_sdvo_set_clock_rate_mult(intel_output, sdvo_priv->save_sdvo_mult);
+ intel_sdvo_set_clock_rate_mult(intel_encoder, sdvo_priv->save_sdvo_mult);
if (sdvo_priv->is_tv) {
/* XXX: Restore TV format/enhancements. */
}
- intel_sdvo_write_sdvox(intel_output, sdvo_priv->save_SDVOX);
+ intel_sdvo_write_sdvox(intel_encoder, sdvo_priv->save_SDVOX);
if (sdvo_priv->save_SDVOX & SDVO_ENABLE)
{
for (i = 0; i < 2; i++)
intel_wait_for_vblank(dev);
- status = intel_sdvo_get_trained_inputs(intel_output, &input1, &input2);
+ status = intel_sdvo_get_trained_inputs(intel_encoder, &input1, &input2);
if (status == SDVO_CMD_STATUS_SUCCESS && !input1)
DRM_DEBUG_KMS("First %s output reported failure to "
"sync\n", SDVO_NAME(sdvo_priv));
}
- intel_sdvo_set_active_outputs(intel_output, sdvo_priv->save_active_outputs);
+ intel_sdvo_set_active_outputs(intel_encoder, sdvo_priv->save_active_outputs);
}
static int intel_sdvo_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
return MODE_OK;
}
-static bool intel_sdvo_get_capabilities(struct intel_output *intel_output, struct intel_sdvo_caps *caps)
+static bool intel_sdvo_get_capabilities(struct intel_encoder *intel_encoder, struct intel_sdvo_caps *caps)
{
u8 status;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0);
- status = intel_sdvo_read_response(intel_output, caps, sizeof(*caps));
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_DEVICE_CAPS, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, caps, sizeof(*caps));
if (status != SDVO_CMD_STATUS_SUCCESS)
return false;
struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
{
struct drm_connector *connector = NULL;
- struct intel_output *iout = NULL;
+ struct intel_encoder *iout = NULL;
struct intel_sdvo_priv *sdvo;
/* find the sdvo connector */
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- iout = to_intel_output(connector);
+ iout = to_intel_encoder(connector);
if (iout->type != INTEL_OUTPUT_SDVO)
continue;
sdvo = iout->dev_priv;
- if (sdvo->output_device == SDVOB && sdvoB)
+ if (sdvo->sdvo_reg == SDVOB && sdvoB)
return connector;
- if (sdvo->output_device == SDVOC && !sdvoB)
+ if (sdvo->sdvo_reg == SDVOC && !sdvoB)
return connector;
}
{
u8 response[2];
u8 status;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
DRM_DEBUG_KMS("\n");
if (!connector)
return 0;
- intel_output = to_intel_output(connector);
+ intel_encoder = to_intel_encoder(connector);
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
- status = intel_sdvo_read_response(intel_output, &response, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, &response, 2);
if (response[0] !=0)
return 1;
{
u8 response[2];
u8 status;
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_output, &response, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
+ intel_sdvo_read_response(intel_encoder, &response, 2);
if (on) {
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
- status = intel_sdvo_read_response(intel_output, &response, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
+ status = intel_sdvo_read_response(intel_encoder, &response, 2);
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
} else {
response[0] = 0;
response[1] = 0;
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
}
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_output, &response, 2);
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
+ intel_sdvo_read_response(intel_encoder, &response, 2);
}
static bool
-intel_sdvo_multifunc_encoder(struct intel_output *intel_output)
+intel_sdvo_multifunc_encoder(struct intel_encoder *intel_encoder)
{
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
int caps = 0;
if (sdvo_priv->caps.output_flags &
intel_find_analog_connector(struct drm_device *dev)
{
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- intel_output = to_intel_output(connector);
- if (intel_output->type == INTEL_OUTPUT_ANALOG)
+ intel_encoder = to_intel_encoder(connector);
+ if (intel_encoder->type == INTEL_OUTPUT_ANALOG)
return connector;
}
return NULL;
enum drm_connector_status
intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
enum drm_connector_status status = connector_status_connected;
struct edid *edid = NULL;
- edid = drm_get_edid(&intel_output->base,
- intel_output->ddc_bus);
+ edid = drm_get_edid(&intel_encoder->base,
+ intel_encoder->ddc_bus);
/* This is only applied to SDVO cards with multiple outputs */
- if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) {
+ if (edid == NULL && intel_sdvo_multifunc_encoder(intel_encoder)) {
uint8_t saved_ddc, temp_ddc;
saved_ddc = sdvo_priv->ddc_bus;
temp_ddc = sdvo_priv->ddc_bus >> 1;
*/
while(temp_ddc > 1) {
sdvo_priv->ddc_bus = temp_ddc;
- edid = drm_get_edid(&intel_output->base,
- intel_output->ddc_bus);
+ edid = drm_get_edid(&intel_encoder->base,
+ intel_encoder->ddc_bus);
if (edid) {
/*
* When we can get the EDID, maybe it is the
*/
if (edid == NULL &&
sdvo_priv->analog_ddc_bus &&
- !intel_analog_is_connected(intel_output->base.dev))
- edid = drm_get_edid(&intel_output->base,
+ !intel_analog_is_connected(intel_encoder->base.dev))
+ edid = drm_get_edid(&intel_encoder->base,
sdvo_priv->analog_ddc_bus);
if (edid != NULL) {
/* Don't report the output as connected if it's a DVI-I
}
kfree(edid);
- intel_output->base.display_info.raw_edid = NULL;
+ intel_encoder->base.display_info.raw_edid = NULL;
} else if (response & (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1))
status = connector_status_disconnected;
{
uint16_t response;
u8 status;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0);
if (sdvo_priv->is_tv) {
/* add 30ms delay when the output type is SDVO-TV */
mdelay(30);
}
- status = intel_sdvo_read_response(intel_output, &response, 2);
+ status = intel_sdvo_read_response(intel_encoder, &response, 2);
DRM_DEBUG_KMS("SDVO response %d %d\n", response & 0xff, response >> 8);
if (response == 0)
return connector_status_disconnected;
- if (intel_sdvo_multifunc_encoder(intel_output) &&
+ if (intel_sdvo_multifunc_encoder(intel_encoder) &&
sdvo_priv->attached_output != response) {
if (sdvo_priv->controlled_output != response &&
- intel_sdvo_output_setup(intel_output, response) != true)
+ intel_sdvo_output_setup(intel_encoder, response) != true)
return connector_status_unknown;
sdvo_priv->attached_output = response;
}
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
int num_modes;
/* set the bus switch and get the modes */
- num_modes = intel_ddc_get_modes(intel_output);
+ num_modes = intel_ddc_get_modes(intel_encoder);
/*
* Mac mini hack. On this device, the DVI-I connector shares one DDC
*/
if (num_modes == 0 &&
sdvo_priv->analog_ddc_bus &&
- !intel_analog_is_connected(intel_output->base.dev)) {
+ !intel_analog_is_connected(intel_encoder->base.dev)) {
struct i2c_adapter *digital_ddc_bus;
/* Switch to the analog ddc bus and try that
*/
- digital_ddc_bus = intel_output->ddc_bus;
- intel_output->ddc_bus = sdvo_priv->analog_ddc_bus;
+ digital_ddc_bus = intel_encoder->ddc_bus;
+ intel_encoder->ddc_bus = sdvo_priv->analog_ddc_bus;
- (void) intel_ddc_get_modes(intel_output);
+ (void) intel_ddc_get_modes(intel_encoder);
- intel_output->ddc_bus = digital_ddc_bus;
+ intel_encoder->ddc_bus = digital_ddc_bus;
}
}
static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
{
- struct intel_output *output = to_intel_output(connector);
+ struct intel_encoder *output = to_intel_encoder(connector);
struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
struct intel_sdvo_sdtv_resolution_request tv_res;
uint32_t reply = 0, format_map = 0;
static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
struct drm_display_mode *newmode;
/*
* Assume that the preferred modes are
* arranged in priority order.
*/
- intel_ddc_get_modes(intel_output);
+ intel_ddc_get_modes(intel_encoder);
if (list_empty(&connector->probed_modes) == false)
goto end;
static int intel_sdvo_get_modes(struct drm_connector *connector)
{
- struct intel_output *output = to_intel_output(connector);
+ struct intel_encoder *output = to_intel_encoder(connector);
struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
if (sdvo_priv->is_tv)
static
void intel_sdvo_destroy_enhance_property(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
struct drm_device *dev = connector->dev;
if (sdvo_priv->is_tv) {
static void intel_sdvo_destroy(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
- if (intel_output->i2c_bus)
- intel_i2c_destroy(intel_output->i2c_bus);
- if (intel_output->ddc_bus)
- intel_i2c_destroy(intel_output->ddc_bus);
+ if (intel_encoder->i2c_bus)
+ intel_i2c_destroy(intel_encoder->i2c_bus);
+ if (intel_encoder->ddc_bus)
+ intel_i2c_destroy(intel_encoder->ddc_bus);
if (sdvo_priv->analog_ddc_bus)
intel_i2c_destroy(sdvo_priv->analog_ddc_bus);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
- kfree(intel_output);
+ kfree(intel_encoder);
}
static int
struct drm_property *property,
uint64_t val)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
- struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_crtc *crtc = encoder->crtc;
int ret = 0;
bool changed = false;
sdvo_priv->cur_brightness = temp_value;
}
if (cmd) {
- intel_sdvo_write_cmd(intel_output, cmd, &temp_value, 2);
- status = intel_sdvo_read_response(intel_output,
+ intel_sdvo_write_cmd(intel_encoder, cmd, &temp_value, 2);
+ status = intel_sdvo_read_response(intel_encoder,
NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO command \n");
}
static bool
-intel_sdvo_get_digital_encoding_mode(struct intel_output *output)
+intel_sdvo_get_digital_encoding_mode(struct intel_encoder *output)
{
struct intel_sdvo_priv *sdvo_priv = output->dev_priv;
uint8_t status;
return true;
}
-static struct intel_output *
-intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan)
+static struct intel_encoder *
+intel_sdvo_chan_to_intel_encoder(struct intel_i2c_chan *chan)
{
struct drm_device *dev = chan->drm_dev;
struct drm_connector *connector;
- struct intel_output *intel_output = NULL;
+ struct intel_encoder *intel_encoder = NULL;
list_for_each_entry(connector,
&dev->mode_config.connector_list, head) {
- if (to_intel_output(connector)->ddc_bus == &chan->adapter) {
- intel_output = to_intel_output(connector);
+ if (to_intel_encoder(connector)->ddc_bus == &chan->adapter) {
+ intel_encoder = to_intel_encoder(connector);
break;
}
}
- return intel_output;
+ return intel_encoder;
}
static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg msgs[], int num)
{
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct intel_sdvo_priv *sdvo_priv;
struct i2c_algo_bit_data *algo_data;
const struct i2c_algorithm *algo;
algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
- intel_output =
- intel_sdvo_chan_to_intel_output(
+ intel_encoder =
+ intel_sdvo_chan_to_intel_encoder(
(struct intel_i2c_chan *)(algo_data->data));
- if (intel_output == NULL)
+ if (intel_encoder == NULL)
return -EINVAL;
- sdvo_priv = intel_output->dev_priv;
- algo = intel_output->i2c_bus->algo;
+ sdvo_priv = intel_encoder->dev_priv;
+ algo = intel_encoder->i2c_bus->algo;
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ intel_sdvo_set_control_bus_switch(intel_encoder, sdvo_priv->ddc_bus);
return algo->master_xfer(i2c_adap, msgs, num);
}
};
static u8
-intel_sdvo_get_slave_addr(struct drm_device *dev, int output_device)
+intel_sdvo_get_slave_addr(struct drm_device *dev, int sdvo_reg)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct sdvo_device_mapping *my_mapping, *other_mapping;
- if (output_device == SDVOB) {
+ if (sdvo_reg == SDVOB) {
my_mapping = &dev_priv->sdvo_mappings[0];
other_mapping = &dev_priv->sdvo_mappings[1];
} else {
/* No SDVO device info is found for another DVO port,
* so use mapping assumption we had before BIOS parsing.
*/
- if (output_device == SDVOB)
+ if (sdvo_reg == SDVOB)
return 0x70;
else
return 0x72;
};
static bool
-intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags)
+intel_sdvo_output_setup(struct intel_encoder *intel_encoder, uint16_t flags)
{
- struct drm_connector *connector = &intel_output->base;
- struct drm_encoder *encoder = &intel_output->enc;
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_connector *connector = &intel_encoder->base;
+ struct drm_encoder *encoder = &intel_encoder->enc;
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
bool ret = true, registered = false;
sdvo_priv->is_tv = false;
- intel_output->needs_tv_clock = false;
+ intel_encoder->needs_tv_clock = false;
sdvo_priv->is_lvds = false;
if (device_is_registered(&connector->kdev)) {
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
- if (intel_sdvo_get_supp_encode(intel_output,
+ if (intel_sdvo_get_supp_encode(intel_encoder,
&sdvo_priv->encode) &&
- intel_sdvo_get_digital_encoding_mode(intel_output) &&
+ intel_sdvo_get_digital_encoding_mode(intel_encoder) &&
sdvo_priv->is_hdmi) {
/* enable hdmi encoding mode if supported */
- intel_sdvo_set_encode(intel_output, SDVO_ENCODE_HDMI);
- intel_sdvo_set_colorimetry(intel_output,
+ intel_sdvo_set_encode(intel_encoder, SDVO_ENCODE_HDMI);
+ intel_sdvo_set_colorimetry(intel_encoder,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
- intel_output->clone_mask =
+ intel_encoder->clone_mask =
(1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT);
}
encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
- intel_output->needs_tv_clock = true;
- intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+ intel_encoder->needs_tv_clock = true;
+ intel_encoder->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
} else if (flags & SDVO_OUTPUT_RGB0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
- intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_RGB1) {
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
- intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_CVBS0) {
encoder->encoder_type = DRM_MODE_ENCODER_TVDAC;
connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
- intel_output->needs_tv_clock = true;
- intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
+ intel_encoder->needs_tv_clock = true;
+ intel_encoder->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT;
} else if (flags & SDVO_OUTPUT_LVDS0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
- intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ intel_encoder->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
(1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_LVDS1) {
encoder->encoder_type = DRM_MODE_ENCODER_LVDS;
connector->connector_type = DRM_MODE_CONNECTOR_LVDS;
sdvo_priv->is_lvds = true;
- intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
+ intel_encoder->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT) |
(1 << INTEL_SDVO_LVDS_CLONE_BIT);
} else {
bytes[0], bytes[1]);
ret = false;
}
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
if (ret && registered)
ret = drm_sysfs_connector_add(connector) == 0 ? true : false;
static void intel_sdvo_tv_create_property(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
struct intel_sdvo_tv_format format;
uint32_t format_map, i;
uint8_t status;
- intel_sdvo_set_target_output(intel_output,
+ intel_sdvo_set_target_output(intel_encoder,
sdvo_priv->controlled_output);
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_SUPPORTED_TV_FORMATS, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&format, sizeof(format));
if (status != SDVO_CMD_STATUS_SUCCESS)
return;
static void intel_sdvo_create_enhance_property(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_encoder->dev_priv;
struct intel_sdvo_enhancements_reply sdvo_data;
struct drm_device *dev = connector->dev;
uint8_t status;
uint16_t response, data_value[2];
- intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+ intel_sdvo_write_cmd(intel_encoder, SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
NULL, 0);
- status = intel_sdvo_read_response(intel_output, &sdvo_data,
+ status = intel_sdvo_read_response(intel_encoder, &sdvo_data,
sizeof(sdvo_data));
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS(" incorrect response is returned\n");
* property
*/
if (sdvo_data.overscan_h) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_OVERSCAN_H, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO max "
"h_overscan\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_OVERSCAN_H, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO h_overscan\n");
data_value[0], data_value[1], response);
}
if (sdvo_data.overscan_v) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_OVERSCAN_V, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO max "
"v_overscan\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_OVERSCAN_V, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO v_overscan\n");
data_value[0], data_value[1], response);
}
if (sdvo_data.position_h) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_POSITION_H, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO Max h_pos\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_POSITION_H, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO get h_postion\n");
data_value[0], data_value[1], response);
}
if (sdvo_data.position_v) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_POSITION_V, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO Max v_pos\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_POSITION_V, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO get v_postion\n");
}
if (sdvo_priv->is_tv) {
if (sdvo_data.saturation) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_SATURATION, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO Max sat\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_SATURATION, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO get sat\n");
data_value[0], data_value[1], response);
}
if (sdvo_data.contrast) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_CONTRAST, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO Max contrast\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_CONTRAST, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO get contrast\n");
data_value[0], data_value[1], response);
}
if (sdvo_data.hue) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_HUE, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO Max hue\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_HUE, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO get hue\n");
}
if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
if (sdvo_data.brightness) {
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_MAX_BRIGHTNESS, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&data_value, 4);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO Max bright\n");
return;
}
- intel_sdvo_write_cmd(intel_output,
+ intel_sdvo_write_cmd(intel_encoder,
SDVO_CMD_GET_BRIGHTNESS, NULL, 0);
- status = intel_sdvo_read_response(intel_output,
+ status = intel_sdvo_read_response(intel_encoder,
&response, 2);
if (status != SDVO_CMD_STATUS_SUCCESS) {
DRM_DEBUG_KMS("Incorrect SDVO get brigh\n");
return;
}
-bool intel_sdvo_init(struct drm_device *dev, int output_device)
+bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct intel_sdvo_priv *sdvo_priv;
u8 ch[0x40];
int i;
- intel_output = kcalloc(sizeof(struct intel_output)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
- if (!intel_output) {
+ intel_encoder = kcalloc(sizeof(struct intel_encoder)+sizeof(struct intel_sdvo_priv), 1, GFP_KERNEL);
+ if (!intel_encoder) {
return false;
}
- sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
- sdvo_priv->output_device = output_device;
+ sdvo_priv = (struct intel_sdvo_priv *)(intel_encoder + 1);
+ sdvo_priv->sdvo_reg = sdvo_reg;
- intel_output->dev_priv = sdvo_priv;
- intel_output->type = INTEL_OUTPUT_SDVO;
+ intel_encoder->dev_priv = sdvo_priv;
+ intel_encoder->type = INTEL_OUTPUT_SDVO;
/* setup the DDC bus. */
- if (output_device == SDVOB)
- intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
+ if (sdvo_reg == SDVOB)
+ intel_encoder->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
else
- intel_output->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
+ intel_encoder->i2c_bus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
- if (!intel_output->i2c_bus)
+ if (!intel_encoder->i2c_bus)
goto err_inteloutput;
- sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, output_device);
+ sdvo_priv->slave_addr = intel_sdvo_get_slave_addr(dev, sdvo_reg);
/* Save the bit-banging i2c functionality for use by the DDC wrapper */
- intel_sdvo_i2c_bit_algo.functionality = intel_output->i2c_bus->algo->functionality;
+ intel_sdvo_i2c_bit_algo.functionality = intel_encoder->i2c_bus->algo->functionality;
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
- if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
+ if (!intel_sdvo_read_byte(intel_encoder, i, &ch[i])) {
DRM_DEBUG_KMS("No SDVO device found on SDVO%c\n",
- output_device == SDVOB ? 'B' : 'C');
+ sdvo_reg == SDVOB ? 'B' : 'C');
goto err_i2c;
}
}
/* setup the DDC bus. */
- if (output_device == SDVOB) {
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+ if (sdvo_reg == SDVOB) {
+ intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOB/VGA DDC BUS");
dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS;
} else {
- intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+ intel_encoder->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA,
"SDVOC/VGA DDC BUS");
dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS;
}
- if (intel_output->ddc_bus == NULL)
+ if (intel_encoder->ddc_bus == NULL)
goto err_i2c;
/* Wrap with our custom algo which switches to DDC mode */
- intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
+ intel_encoder->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
/* In default case sdvo lvds is false */
- intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
+ intel_sdvo_get_capabilities(intel_encoder, &sdvo_priv->caps);
- if (intel_sdvo_output_setup(intel_output,
+ if (intel_sdvo_output_setup(intel_encoder,
sdvo_priv->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
- output_device == SDVOB ? 'B' : 'C');
+ sdvo_reg == SDVOB ? 'B' : 'C');
goto err_i2c;
}
- connector = &intel_output->base;
+ connector = &intel_encoder->base;
drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
connector->connector_type);
connector->doublescan_allowed = 0;
connector->display_info.subpixel_order = SubPixelHorizontalRGB;
- drm_encoder_init(dev, &intel_output->enc,
- &intel_sdvo_enc_funcs, intel_output->enc.encoder_type);
+ drm_encoder_init(dev, &intel_encoder->enc,
+ &intel_sdvo_enc_funcs, intel_encoder->enc.encoder_type);
- drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
+ drm_encoder_helper_add(&intel_encoder->enc, &intel_sdvo_helper_funcs);
- drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
+ drm_mode_connector_attach_encoder(&intel_encoder->base, &intel_encoder->enc);
if (sdvo_priv->is_tv)
intel_sdvo_tv_create_property(connector);
intel_sdvo_select_ddc_bus(sdvo_priv);
/* Set the input timing to the screen. Assume always input 0. */
- intel_sdvo_set_target_input(intel_output, true, false);
+ intel_sdvo_set_target_input(intel_encoder, true, false);
- intel_sdvo_get_input_pixel_clock_range(intel_output,
+ intel_sdvo_get_input_pixel_clock_range(intel_encoder,
&sdvo_priv->pixel_clock_min,
&sdvo_priv->pixel_clock_max);
err_i2c:
if (sdvo_priv->analog_ddc_bus != NULL)
intel_i2c_destroy(sdvo_priv->analog_ddc_bus);
- if (intel_output->ddc_bus != NULL)
- intel_i2c_destroy(intel_output->ddc_bus);
- if (intel_output->i2c_bus != NULL)
- intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_encoder->ddc_bus != NULL)
+ intel_i2c_destroy(intel_encoder->ddc_bus);
+ if (intel_encoder->i2c_bus != NULL)
+ intel_i2c_destroy(intel_encoder->i2c_bus);
err_inteloutput:
- kfree(intel_output);
+ kfree(intel_encoder);
return false;
}
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
int i;
tv_priv->save_TV_H_CTL_1 = I915_READ(TV_H_CTL_1);
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
struct drm_crtc *crtc = connector->encoder->crtc;
struct intel_crtc *intel_crtc;
int i;
}
static const struct tv_mode *
-intel_tv_mode_find (struct intel_output *intel_output)
+intel_tv_mode_find (struct intel_encoder *intel_encoder)
{
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
return intel_tv_mode_lookup(tv_priv->tv_format);
}
static enum drm_mode_status
intel_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode)
{
- struct intel_output *intel_output = to_intel_output(connector);
- const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_encoder);
/* Ensure TV refresh is close to desired refresh */
if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode) * 1000)
{
struct drm_device *dev = encoder->dev;
struct drm_mode_config *drm_config = &dev->mode_config;
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- const struct tv_mode *tv_mode = intel_tv_mode_find (intel_output);
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ const struct tv_mode *tv_mode = intel_tv_mode_find (intel_encoder);
struct drm_encoder *other_encoder;
if (!tv_mode)
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- struct intel_output *intel_output = enc_to_intel_output(encoder);
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
- const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+ struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_encoder);
u32 tv_ctl;
u32 hctl1, hctl2, hctl3;
u32 vctl1, vctl2, vctl3, vctl4, vctl5, vctl6, vctl7;
* \return false if TV is disconnected.
*/
static int
-intel_tv_detect_type (struct drm_crtc *crtc, struct intel_output *intel_output)
+intel_tv_detect_type (struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
{
- struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long irqflags;
*/
static void intel_tv_find_better_format(struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
- const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_encoder);
int i;
if ((tv_priv->type == DRM_MODE_CONNECTOR_Component) ==
{
struct drm_crtc *crtc;
struct drm_display_mode mode;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
- struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
+ struct drm_encoder *encoder = &intel_encoder->enc;
int dpms_mode;
int type = tv_priv->type;
drm_mode_set_crtcinfo(&mode, CRTC_INTERLACE_HALVE_V);
if (encoder->crtc && encoder->crtc->enabled) {
- type = intel_tv_detect_type(encoder->crtc, intel_output);
+ type = intel_tv_detect_type(encoder->crtc, intel_encoder);
} else {
- crtc = intel_get_load_detect_pipe(intel_output, &mode, &dpms_mode);
+ crtc = intel_get_load_detect_pipe(intel_encoder, &mode, &dpms_mode);
if (crtc) {
- type = intel_tv_detect_type(crtc, intel_output);
- intel_release_load_detect_pipe(intel_output, dpms_mode);
+ type = intel_tv_detect_type(crtc, intel_encoder);
+ intel_release_load_detect_pipe(intel_encoder, dpms_mode);
} else
type = -1;
}
intel_tv_chose_preferred_modes(struct drm_connector *connector,
struct drm_display_mode *mode_ptr)
{
- struct intel_output *intel_output = to_intel_output(connector);
- const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_encoder);
if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
intel_tv_get_modes(struct drm_connector *connector)
{
struct drm_display_mode *mode_ptr;
- struct intel_output *intel_output = to_intel_output(connector);
- const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ const struct tv_mode *tv_mode = intel_tv_mode_find(intel_encoder);
int j, count = 0;
u64 tmp;
static void
intel_tv_destroy (struct drm_connector *connector)
{
- struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
- kfree(intel_output);
+ kfree(intel_encoder);
}
uint64_t val)
{
struct drm_device *dev = connector->dev;
- struct intel_output *intel_output = to_intel_output(connector);
- struct intel_tv_priv *tv_priv = intel_output->dev_priv;
- struct drm_encoder *encoder = &intel_output->enc;
+ struct intel_encoder *intel_encoder = to_intel_encoder(connector);
+ struct intel_tv_priv *tv_priv = intel_encoder->dev_priv;
+ struct drm_encoder *encoder = &intel_encoder->enc;
struct drm_crtc *crtc = encoder->crtc;
int ret = 0;
bool changed = false;
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
- struct intel_output *intel_output;
+ struct intel_encoder *intel_encoder;
struct intel_tv_priv *tv_priv;
u32 tv_dac_on, tv_dac_off, save_tv_dac;
char **tv_format_names;
(tv_dac_off & TVDAC_STATE_CHG_EN) != 0)
return;
- intel_output = kzalloc(sizeof(struct intel_output) +
+ intel_encoder = kzalloc(sizeof(struct intel_encoder) +
sizeof(struct intel_tv_priv), GFP_KERNEL);
- if (!intel_output) {
+ if (!intel_encoder) {
return;
}
- connector = &intel_output->base;
+ connector = &intel_encoder->base;
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
DRM_MODE_CONNECTOR_SVIDEO);
- drm_encoder_init(dev, &intel_output->enc, &intel_tv_enc_funcs,
+ drm_encoder_init(dev, &intel_encoder->enc, &intel_tv_enc_funcs,
DRM_MODE_ENCODER_TVDAC);
- drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
- tv_priv = (struct intel_tv_priv *)(intel_output + 1);
- intel_output->type = INTEL_OUTPUT_TVOUT;
- intel_output->crtc_mask = (1 << 0) | (1 << 1);
- intel_output->clone_mask = (1 << INTEL_TV_CLONE_BIT);
- intel_output->enc.possible_crtcs = ((1 << 0) | (1 << 1));
- intel_output->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
- intel_output->dev_priv = tv_priv;
+ drm_mode_connector_attach_encoder(&intel_encoder->base, &intel_encoder->enc);
+ tv_priv = (struct intel_tv_priv *)(intel_encoder + 1);
+ intel_encoder->type = INTEL_OUTPUT_TVOUT;
+ intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+ intel_encoder->clone_mask = (1 << INTEL_TV_CLONE_BIT);
+ intel_encoder->enc.possible_crtcs = ((1 << 0) | (1 << 1));
+ intel_encoder->enc.possible_clones = (1 << INTEL_OUTPUT_TVOUT);
+ intel_encoder->dev_priv = tv_priv;
tv_priv->type = DRM_MODE_CONNECTOR_Unknown;
/* BIOS margin values */
tv_priv->tv_format = kstrdup(tv_modes[initial_mode].name, GFP_KERNEL);
- drm_encoder_helper_add(&intel_output->enc, &intel_tv_helper_funcs);
+ drm_encoder_helper_add(&intel_encoder->enc, &intel_tv_helper_funcs);
drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs);
connector->interlace_allowed = false;
connector->doublescan_allowed = false;
nouveau_dp.o nouveau_grctx.o \
nv04_timer.o \
nv04_mc.o nv40_mc.o nv50_mc.o \
- nv04_fb.o nv10_fb.o nv40_fb.o \
+ nv04_fb.o nv10_fb.o nv40_fb.o nv50_fb.o \
nv04_fifo.o nv10_fifo.o nv40_fifo.o nv50_fifo.o \
nv04_graph.o nv10_graph.o nv20_graph.o \
nv40_graph.o nv50_graph.o \
nv50_cursor.o nv50_display.o nv50_fbcon.o \
nv04_dac.o nv04_dfp.o nv04_tv.o nv17_tv.o nv17_tv_modes.o \
nv04_crtc.o nv04_display.o nv04_cursor.o nv04_fbcon.o \
- nv17_gpio.o
+ nv17_gpio.o nv50_gpio.o
nouveau-$(CONFIG_DRM_NOUVEAU_DEBUG) += nouveau_debugfs.o
nouveau-$(CONFIG_COMPAT) += nouveau_ioc32.o
#include <linux/pci.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
* each GPIO according to various values listed in each entry
*/
- const uint32_t nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
+ struct drm_nouveau_private *dev_priv = bios->dev->dev_private;
const uint32_t nv50_gpio_ctl[2] = { 0xe100, 0xe28c };
- const uint8_t *gpio_table = &bios->data[bios->dcb.gpio_table_ptr];
- const uint8_t *gpio_entry;
int i;
- if (!iexec->execute)
- return 1;
-
- if (bios->dcb.version != 0x40) {
- NV_ERROR(bios->dev, "DCB table not version 4.0\n");
- return 0;
+ if (dev_priv->card_type != NV_50) {
+ NV_ERROR(bios->dev, "INIT_GPIO on unsupported chipset\n");
+ return -ENODEV;
}
- if (!bios->dcb.gpio_table_ptr) {
- NV_WARN(bios->dev, "Invalid pointer to INIT_8E table\n");
- return 0;
- }
+ if (!iexec->execute)
+ return 1;
- gpio_entry = gpio_table + gpio_table[1];
- for (i = 0; i < gpio_table[2]; i++, gpio_entry += gpio_table[3]) {
- uint32_t entry = ROM32(gpio_entry[0]), r, s, v;
- int line = (entry & 0x0000001f);
+ for (i = 0; i < bios->dcb.gpio.entries; i++) {
+ struct dcb_gpio_entry *gpio = &bios->dcb.gpio.entry[i];
+ uint32_t r, s, v;
- BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, entry);
+ BIOSLOG(bios, "0x%04X: Entry: 0x%08X\n", offset, gpio->entry);
- if ((entry & 0x0000ff00) == 0x0000ff00)
- continue;
+ nv50_gpio_set(bios->dev, gpio->tag, gpio->state_default);
- r = nv50_gpio_reg[line >> 3];
- s = (line & 0x07) << 2;
- v = bios_rd32(bios, r) & ~(0x00000003 << s);
- if (entry & 0x01000000)
- v |= (((entry & 0x60000000) >> 29) ^ 2) << s;
- else
- v |= (((entry & 0x18000000) >> 27) ^ 2) << s;
- bios_wr32(bios, r, v);
-
- r = nv50_gpio_ctl[line >> 4];
- s = (line & 0x0f);
+ /* The NVIDIA binary driver doesn't appear to actually do
+ * any of this, my VBIOS does however.
+ */
+ /* Not a clue, needs de-magicing */
+ r = nv50_gpio_ctl[gpio->line >> 4];
+ s = (gpio->line & 0x0f);
v = bios_rd32(bios, r) & ~(0x00010001 << s);
- switch ((entry & 0x06000000) >> 25) {
+ switch ((gpio->entry & 0x06000000) >> 25) {
case 1:
v |= (0x00000001 << s);
break;
struct nvbios *bios = &dev_priv->vbios;
unsigned int outputset = (dcbent->or == 4) ? 1 : 0;
uint16_t scriptptr = 0, clktable;
- uint8_t clktableptr = 0;
/*
* For now we assume version 3.0 table - g80 support will need some
scriptptr = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 11 + outputset * 2]);
break;
case LVDS_RESET:
+ clktable = bios->fp.lvdsmanufacturerpointer + 15;
+ if (dcbent->or == 4)
+ clktable += 8;
+
if (dcbent->lvdsconf.use_straps_for_mode) {
if (bios->fp.dual_link)
- clktableptr += 2;
- if (bios->fp.BITbit1)
- clktableptr++;
+ clktable += 4;
+ if (bios->fp.if_is_24bit)
+ clktable += 2;
} else {
/* using EDID */
- uint8_t fallback = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
- int fallbackcmpval = (dcbent->or == 4) ? 4 : 1;
+ int cmpval_24bit = (dcbent->or == 4) ? 4 : 1;
if (bios->fp.dual_link) {
- clktableptr += 2;
- fallbackcmpval *= 2;
+ clktable += 4;
+ cmpval_24bit <<= 1;
}
- if (fallbackcmpval & fallback)
- clktableptr++;
+
+ if (bios->fp.strapless_is_24bit & cmpval_24bit)
+ clktable += 2;
}
- /* adding outputset * 8 may not be correct */
- clktable = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 15 + clktableptr * 2 + outputset * 8]);
+ clktable = ROM16(bios->data[clktable]);
if (!clktable) {
NV_ERROR(dev, "Pixel clock comparison table not found\n");
return -ENOENT;
*if_is_24bit = bios->data[lvdsofs] & 16;
break;
case 0x30:
- /*
- * My money would be on there being a 24 bit interface bit in
- * this table, but I have no example of a laptop bios with a
- * 24 bit panel to confirm that. Hence we shout loudly if any
- * bit other than bit 0 is set (I've not even seen bit 1)
- */
- if (bios->data[lvdsofs] > 1)
- NV_ERROR(dev,
- "You have a very unusual laptop display; please report it\n");
+ case 0x40:
/*
* No sign of the "power off for reset" or "reset for panel
* on" bits, but it's safer to assume we should
*/
bios->fp.power_off_for_reset = true;
bios->fp.reset_after_pclk_change = true;
+
/*
* It's ok lvdsofs is wrong for nv4x edid case; dual_link is
- * over-written, and BITbit1 isn't used
+ * over-written, and if_is_24bit isn't used
*/
bios->fp.dual_link = bios->data[lvdsofs] & 1;
- bios->fp.BITbit1 = bios->data[lvdsofs] & 2;
- bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;
- break;
- case 0x40:
- bios->fp.dual_link = bios->data[lvdsofs] & 1;
bios->fp.if_is_24bit = bios->data[lvdsofs] & 2;
bios->fp.strapless_is_24bit = bios->data[bios->fp.lvdsmanufacturerpointer + 4];
bios->fp.duallink_transition_clk = ROM16(bios->data[bios->fp.lvdsmanufacturerpointer + 5]) * 10;
break;
}
+ /* Dell Latitude D620 reports a too-high value for the dual-link
+ * transition freq, causing us to program the panel incorrectly.
+ *
+ * It doesn't appear the VBIOS actually uses its transition freq
+ * (90000kHz), instead it uses the "Number of LVDS channels" field
+ * out of the panel ID structure (http://www.spwg.org/).
+ *
+ * For the moment, a quirk will do :)
+ */
+ if ((dev->pdev->device == 0x01d7) &&
+ (dev->pdev->subsystem_vendor == 0x1028) &&
+ (dev->pdev->subsystem_device == 0x01c2)) {
+ bios->fp.duallink_transition_clk = 80000;
+ }
+
/* set dual_link flag for EDID case */
if (pxclk && (chip_version < 0x25 || chip_version > 0x28))
bios->fp.dual_link = (pxclk >= bios->fp.duallink_transition_clk);
gpio->tag = tag;
gpio->line = line;
gpio->invert = flags != 4;
+ gpio->entry = ent;
}
static void
parse_dcb40_gpio_entry(struct nvbios *bios, uint16_t offset)
{
+ uint32_t entry = ROM32(bios->data[offset]);
struct dcb_gpio_entry *gpio;
- uint32_t ent = ROM32(bios->data[offset]);
- uint8_t line = ent & 0x1f,
- tag = ent >> 8 & 0xff;
- if (tag == 0xff)
+ if ((entry & 0x0000ff00) == 0x0000ff00)
return;
gpio = new_gpio_entry(bios);
-
- /* Currently unused, we may need more fields parsed at some
- * point. */
- gpio->tag = tag;
- gpio->line = line;
+ gpio->tag = (entry & 0x0000ff00) >> 8;
+ gpio->line = (entry & 0x0000001f) >> 0;
+ gpio->state_default = (entry & 0x01000000) >> 24;
+ gpio->state[0] = (entry & 0x18000000) >> 27;
+ gpio->state[1] = (entry & 0x60000000) >> 29;
+ gpio->entry = entry;
}
static void
return type;
}
+static void
+apply_dcb_connector_quirks(struct nvbios *bios, int idx)
+{
+ struct dcb_connector_table_entry *cte = &bios->dcb.connector.entry[idx];
+ struct drm_device *dev = bios->dev;
+
+ /* Gigabyte NX85T */
+ if ((dev->pdev->device == 0x0421) &&
+ (dev->pdev->subsystem_vendor == 0x1458) &&
+ (dev->pdev->subsystem_device == 0x344c)) {
+ if (cte->type == DCB_CONNECTOR_HDMI_1)
+ cte->type = DCB_CONNECTOR_DVI_I;
+ }
+}
+
static void
parse_dcb_connector_table(struct nvbios *bios)
{
entry = conntab + conntab[1];
cte = &ct->entry[0];
for (i = 0; i < conntab[2]; i++, entry += conntab[3], cte++) {
+ cte->index = i;
if (conntab[3] == 2)
cte->entry = ROM16(entry[0]);
else
cte->entry = ROM32(entry[0]);
cte->type = (cte->entry & 0x000000ff) >> 0;
- cte->index = (cte->entry & 0x00000f00) >> 8;
+ cte->index2 = (cte->entry & 0x00000f00) >> 8;
switch (cte->entry & 0x00033000) {
case 0x00001000:
cte->gpio_tag = 0x07;
if (cte->type == 0xff)
continue;
+ apply_dcb_connector_quirks(bios, i);
+
NV_INFO(dev, " %d: 0x%08x: type 0x%02x idx %d tag 0x%02x\n",
i, cte->entry, cte->type, cte->index, cte->gpio_tag);
break;
default:
cte->type = divine_connector_type(bios, cte->index);
- NV_WARN(dev, "unknown type, using 0x%02x", cte->type);
+ NV_WARN(dev, "unknown type, using 0x%02x\n", cte->type);
break;
}
+ if (nouveau_override_conntype) {
+ int type = divine_connector_type(bios, cte->index);
+ if (type != cte->type)
+ NV_WARN(dev, " -> type 0x%02x\n", cte->type);
+ }
+
}
}
enum dcb_gpio_tag tag;
int line;
bool invert;
+ uint32_t entry;
+ uint8_t state_default;
+ uint8_t state[2];
};
struct dcb_gpio_table {
};
struct dcb_connector_table_entry {
+ uint8_t index;
uint32_t entry;
enum dcb_connector_type type;
- uint8_t index;
+ uint8_t index2;
uint8_t gpio_tag;
};
bool reset_after_pclk_change;
bool dual_link;
bool link_c_increment;
- bool BITbit1;
bool if_is_24bit;
int duallink_transition_clk;
uint8_t strapless_is_24bit;
#include "nouveau_dma.h"
#include <linux/log2.h>
+#include <linux/slab.h>
static void
nouveau_bo_del_ttm(struct ttm_buffer_object *bo)
* many small buffers.
*/
if (dev_priv->card_type == NV_50) {
- uint32_t block_size = nouveau_mem_fb_amount(dev) >> 15;
+ uint32_t block_size = dev_priv->vram_size >> 15;
int i;
switch (tile_flags) {
nvbo->placement.fpfn = 0;
nvbo->placement.lpfn = mappable ? dev_priv->fb_mappable_pages : 0;
- nouveau_bo_placement_set(nvbo, flags);
+ nouveau_bo_placement_set(nvbo, flags, 0);
nvbo->channel = chan;
ret = ttm_bo_init(&dev_priv->ttm.bdev, &nvbo->bo, size,
return 0;
}
+static void
+set_placement_list(uint32_t *pl, unsigned *n, uint32_t type, uint32_t flags)
+{
+ *n = 0;
+
+ if (type & TTM_PL_FLAG_VRAM)
+ pl[(*n)++] = TTM_PL_FLAG_VRAM | flags;
+ if (type & TTM_PL_FLAG_TT)
+ pl[(*n)++] = TTM_PL_FLAG_TT | flags;
+ if (type & TTM_PL_FLAG_SYSTEM)
+ pl[(*n)++] = TTM_PL_FLAG_SYSTEM | flags;
+}
+
void
-nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t memtype)
+nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t type, uint32_t busy)
{
- int n = 0;
-
- if (memtype & TTM_PL_FLAG_VRAM)
- nvbo->placements[n++] = TTM_PL_FLAG_VRAM | TTM_PL_MASK_CACHING;
- if (memtype & TTM_PL_FLAG_TT)
- nvbo->placements[n++] = TTM_PL_FLAG_TT | TTM_PL_MASK_CACHING;
- if (memtype & TTM_PL_FLAG_SYSTEM)
- nvbo->placements[n++] = TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
- nvbo->placement.placement = nvbo->placements;
- nvbo->placement.busy_placement = nvbo->placements;
- nvbo->placement.num_placement = n;
- nvbo->placement.num_busy_placement = n;
-
- if (nvbo->pin_refcnt) {
- while (n--)
- nvbo->placements[n] |= TTM_PL_FLAG_NO_EVICT;
- }
+ struct ttm_placement *pl = &nvbo->placement;
+ uint32_t flags = TTM_PL_MASK_CACHING |
+ (nvbo->pin_refcnt ? TTM_PL_FLAG_NO_EVICT : 0);
+
+ pl->placement = nvbo->placements;
+ set_placement_list(nvbo->placements, &pl->num_placement,
+ type, flags);
+
+ pl->busy_placement = nvbo->busy_placements;
+ set_placement_list(nvbo->busy_placements, &pl->num_busy_placement,
+ type | busy, flags);
}
int
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(nvbo->bo.bdev);
struct ttm_buffer_object *bo = &nvbo->bo;
- int ret, i;
+ int ret;
if (nvbo->pin_refcnt && !(memtype & (1 << bo->mem.mem_type))) {
NV_ERROR(nouveau_bdev(bo->bdev)->dev,
if (ret)
goto out;
- nouveau_bo_placement_set(nvbo, memtype);
- for (i = 0; i < nvbo->placement.num_placement; i++)
- nvbo->placements[i] |= TTM_PL_FLAG_NO_EVICT;
+ nouveau_bo_placement_set(nvbo, memtype, 0);
ret = ttm_bo_validate(bo, &nvbo->placement, false, false);
if (ret == 0) {
{
struct drm_nouveau_private *dev_priv = nouveau_bdev(nvbo->bo.bdev);
struct ttm_buffer_object *bo = &nvbo->bo;
- int ret, i;
+ int ret;
if (--nvbo->pin_refcnt)
return 0;
if (ret)
return ret;
- for (i = 0; i < nvbo->placement.num_placement; i++)
- nvbo->placements[i] &= ~TTM_PL_FLAG_NO_EVICT;
+ nouveau_bo_placement_set(nvbo, bo->mem.placement, 0);
ret = ttm_bo_validate(bo, &nvbo->placement, false, false);
if (ret == 0) {
man->io_addr = NULL;
man->io_offset = drm_get_resource_start(dev, 1);
man->io_size = drm_get_resource_len(dev, 1);
- if (man->io_size > nouveau_mem_fb_amount(dev))
- man->io_size = nouveau_mem_fb_amount(dev);
+ if (man->io_size > dev_priv->vram_size)
+ man->io_size = dev_priv->vram_size;
man->gpu_offset = dev_priv->vm_vram_base;
break;
switch (bo->mem.mem_type) {
case TTM_PL_VRAM:
- nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT |
+ nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_TT,
TTM_PL_FLAG_SYSTEM);
break;
default:
- nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_SYSTEM);
+ nouveau_bo_placement_set(nvbo, TTM_PL_FLAG_SYSTEM, 0);
break;
}
GFP_KERNEL);
if (!dev_priv->fifos[channel])
return -ENOMEM;
- dev_priv->fifo_alloc_count++;
chan = dev_priv->fifos[channel];
INIT_LIST_HEAD(&chan->nvsw.vbl_wait);
INIT_LIST_HEAD(&chan->fence.pending);
iounmap(chan->user);
dev_priv->fifos[chan->id] = NULL;
- dev_priv->fifo_alloc_count--;
kfree(chan);
}
detect_analog:
nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
- if (!nv_encoder)
+ if (!nv_encoder && !nouveau_tv_disable)
nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
if (nv_encoder) {
struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
{
struct drm_info_node *node = (struct drm_info_node *) m->private;
struct drm_minor *minor = node->minor;
- struct drm_device *dev = minor->dev;
+ struct drm_nouveau_private *dev_priv = minor->dev->dev_private;
- seq_printf(m, "VRAM total: %dKiB\n",
- (int)(nouveau_mem_fb_amount(dev) >> 10));
+ seq_printf(m, "VRAM total: %dKiB\n", (int)(dev_priv->vram_size >> 10));
return 0;
}
nouveau_bo_wr32(pb, ip++, upper_32_bits(offset) | length << 8);
chan->dma.ib_put = (chan->dma.ib_put + 1) & chan->dma.ib_max;
+
+ DRM_MEMORYBARRIER();
+ /* Flush writes. */
+ nouveau_bo_rd32(pb, 0);
+
nvchan_wr32(chan, 0x8c, chan->dma.ib_put);
chan->dma.ib_free--;
}
ctrl |= (cmd << NV50_AUXCH_CTRL_CMD_SHIFT);
ctrl |= ((data_nr - 1) << NV50_AUXCH_CTRL_LEN_SHIFT);
- for (;;) {
+ for (i = 0; i < 16; i++) {
nv_wr32(dev, NV50_AUXCH_CTRL(index), ctrl | 0x80000000);
nv_wr32(dev, NV50_AUXCH_CTRL(index), ctrl);
nv_wr32(dev, NV50_AUXCH_CTRL(index), ctrl | 0x00010000);
break;
}
+ if (i == 16) {
+ NV_ERROR(dev, "auxch DEFER too many times, bailing\n");
+ ret = -EREMOTEIO;
+ goto out;
+ }
+
if (cmd & 1) {
if ((stat & NV50_AUXCH_STAT_COUNT) != data_nr) {
ret = -EREMOTEIO;
int nouveau_nofbaccel = 0;
module_param_named(nofbaccel, nouveau_nofbaccel, int, 0400);
+MODULE_PARM_DESC(override_conntype, "Ignore DCB connector type");
+int nouveau_override_conntype = 0;
+module_param_named(override_conntype, nouveau_override_conntype, int, 0400);
+
+MODULE_PARM_DESC(tv_disable, "Disable TV-out detection\n");
+int nouveau_tv_disable = 0;
+module_param_named(tv_disable, nouveau_tv_disable, int, 0400);
+
MODULE_PARM_DESC(tv_norm, "Default TV norm.\n"
"\t\tSupported: PAL, PAL-M, PAL-N, PAL-Nc, NTSC-M, NTSC-J,\n"
"\t\t\thd480i, hd480p, hd576i, hd576p, hd720p, hd1080i.\n"
if (pm_state.event == PM_EVENT_PRETHAW)
return 0;
+ NV_INFO(dev, "Disabling fbcon acceleration...\n");
fbdev_flags = dev_priv->fbdev_info->flags;
dev_priv->fbdev_info->flags |= FBINFO_HWACCEL_DISABLED;
+ NV_INFO(dev, "Unpinning framebuffer(s)...\n");
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
struct nouveau_framebuffer *nouveau_fb;
struct ttm_buffer_object bo;
struct ttm_placement placement;
u32 placements[3];
+ u32 busy_placements[3];
struct ttm_bo_kmap_obj kmap;
struct list_head head;
struct workqueue_struct *wq;
struct work_struct irq_work;
+ struct work_struct hpd_work;
struct list_head vbl_waiting;
struct fb_info *fbdev_info;
- int fifo_alloc_count;
struct nouveau_channel *fifos[NOUVEAU_MAX_CHANNEL_NR];
struct nouveau_engine engine;
uint32_t ramro_offset;
uint32_t ramro_size;
- /* base physical addresses */
- uint64_t fb_phys;
- uint64_t fb_available_size;
- uint64_t fb_mappable_pages;
- uint64_t fb_aper_free;
-
struct {
enum {
NOUVEAU_GART_NONE = 0,
struct nouveau_gpuobj *sg_ctxdma;
struct page *sg_dummy_page;
dma_addr_t sg_dummy_bus;
-
- /* nottm hack */
- struct drm_ttm_backend *sg_be;
- unsigned long sg_handle;
} gart_info;
/* nv10-nv40 tiling regions */
spinlock_t lock;
} tile;
+ /* VRAM/fb configuration */
+ uint64_t vram_size;
+ uint64_t vram_sys_base;
+
+ uint64_t fb_phys;
+ uint64_t fb_available_size;
+ uint64_t fb_mappable_pages;
+ uint64_t fb_aper_free;
+ int fb_mtrr;
+
/* G8x/G9x virtual address space */
uint64_t vm_gart_base;
uint64_t vm_gart_size;
uint64_t vm_end;
struct nouveau_gpuobj *vm_vram_pt[NV50_VM_VRAM_NR];
int vm_vram_pt_nr;
- uint64_t vram_sys_base;
-
- /* the mtrr covering the FB */
- int fb_mtrr;
struct mem_block *ramin_heap;
uint32_t dac_users[4];
struct nouveau_suspend_resume {
- uint32_t fifo_mode;
- uint32_t graph_ctx_control;
- uint32_t graph_state;
uint32_t *ramin_copy;
- uint64_t ramin_size;
} susres;
struct backlight_device *backlight;
extern int nouveau_vram_pushbuf;
extern int nouveau_vram_notify;
extern int nouveau_fbpercrtc;
+extern int nouveau_tv_disable;
extern char *nouveau_tv_norm;
extern int nouveau_reg_debug;
extern char *nouveau_vbios;
extern int nouveau_ignorelid;
extern int nouveau_nofbaccel;
extern int nouveau_noaccel;
+extern int nouveau_override_conntype;
extern int nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state);
extern int nouveau_pci_resume(struct pci_dev *pdev);
struct drm_file *, int tail);
extern void nouveau_mem_takedown(struct mem_block **heap);
extern void nouveau_mem_free_block(struct mem_block *);
-extern uint64_t nouveau_mem_fb_amount(struct drm_device *);
+extern int nouveau_mem_detect(struct drm_device *dev);
extern void nouveau_mem_release(struct drm_file *, struct mem_block *heap);
extern int nouveau_mem_init(struct drm_device *);
extern int nouveau_mem_init_agp(struct drm_device *);
extern void nv40_fb_set_region_tiling(struct drm_device *, int, uint32_t,
uint32_t, uint32_t);
+/* nv50_fb.c */
+extern int nv50_fb_init(struct drm_device *);
+extern void nv50_fb_takedown(struct drm_device *);
+
/* nv04_fifo.c */
extern int nv04_fifo_init(struct drm_device *);
extern void nv04_fifo_disable(struct drm_device *);
extern int nouveau_bo_unpin(struct nouveau_bo *);
extern int nouveau_bo_map(struct nouveau_bo *);
extern void nouveau_bo_unmap(struct nouveau_bo *);
-extern void nouveau_bo_placement_set(struct nouveau_bo *, uint32_t memtype);
+extern void nouveau_bo_placement_set(struct nouveau_bo *, uint32_t type,
+ uint32_t busy);
extern u16 nouveau_bo_rd16(struct nouveau_bo *nvbo, unsigned index);
extern void nouveau_bo_wr16(struct nouveau_bo *nvbo, unsigned index, u16 val);
extern u32 nouveau_bo_rd32(struct nouveau_bo *nvbo, unsigned index);
int nv17_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
int nv17_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
+/* nv50_gpio.c */
+int nv50_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag);
+int nv50_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state);
+
#ifndef ioread32_native
#ifdef __BIG_ENDIAN
#define ioread16_native ioread16be
union {
struct {
+ int mc_unknown;
int dpcd_version;
int link_nr;
int link_bw;
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
-#include <linux/slab.h>
#include <linux/sysrq.h>
#include <linux/delay.h>
#include <linux/fb.h>
{
struct nouveau_bo *nvbo = gem->driver_private;
struct ttm_buffer_object *bo = &nvbo->bo;
- uint64_t flags;
+ uint32_t domains = valid_domains &
+ (write_domains ? write_domains : read_domains);
+ uint32_t pref_flags = 0, valid_flags = 0;
- if (!valid_domains || (!read_domains && !write_domains))
+ if (!domains)
return -EINVAL;
- if (write_domains) {
- if ((valid_domains & NOUVEAU_GEM_DOMAIN_VRAM) &&
- (write_domains & NOUVEAU_GEM_DOMAIN_VRAM))
- flags = TTM_PL_FLAG_VRAM;
- else
- if ((valid_domains & NOUVEAU_GEM_DOMAIN_GART) &&
- (write_domains & NOUVEAU_GEM_DOMAIN_GART))
- flags = TTM_PL_FLAG_TT;
- else
- return -EINVAL;
- } else {
- if ((valid_domains & NOUVEAU_GEM_DOMAIN_VRAM) &&
- (read_domains & NOUVEAU_GEM_DOMAIN_VRAM) &&
- bo->mem.mem_type == TTM_PL_VRAM)
- flags = TTM_PL_FLAG_VRAM;
- else
- if ((valid_domains & NOUVEAU_GEM_DOMAIN_GART) &&
- (read_domains & NOUVEAU_GEM_DOMAIN_GART) &&
- bo->mem.mem_type == TTM_PL_TT)
- flags = TTM_PL_FLAG_TT;
- else
- if ((valid_domains & NOUVEAU_GEM_DOMAIN_VRAM) &&
- (read_domains & NOUVEAU_GEM_DOMAIN_VRAM))
- flags = TTM_PL_FLAG_VRAM;
- else
- flags = TTM_PL_FLAG_TT;
- }
+ if (valid_domains & NOUVEAU_GEM_DOMAIN_VRAM)
+ valid_flags |= TTM_PL_FLAG_VRAM;
+
+ if (valid_domains & NOUVEAU_GEM_DOMAIN_GART)
+ valid_flags |= TTM_PL_FLAG_TT;
+
+ if ((domains & NOUVEAU_GEM_DOMAIN_VRAM) &&
+ bo->mem.mem_type == TTM_PL_VRAM)
+ pref_flags |= TTM_PL_FLAG_VRAM;
+
+ else if ((domains & NOUVEAU_GEM_DOMAIN_GART) &&
+ bo->mem.mem_type == TTM_PL_TT)
+ pref_flags |= TTM_PL_FLAG_TT;
+
+ else if (domains & NOUVEAU_GEM_DOMAIN_VRAM)
+ pref_flags |= TTM_PL_FLAG_VRAM;
+
+ else
+ pref_flags |= TTM_PL_FLAG_TT;
+
+ nouveau_bo_placement_set(nvbo, pref_flags, valid_flags);
- nouveau_bo_placement_set(nvbo, flags);
return 0;
}
*/
#include <linux/firmware.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "nouveau_drv.h"
if (dev_priv->card_type == NV_50) {
INIT_WORK(&dev_priv->irq_work, nv50_display_irq_handler_bh);
+ INIT_WORK(&dev_priv->hpd_work, nv50_display_irq_hotplug_bh);
INIT_LIST_HEAD(&dev_priv->vbl_waiting);
}
}
#define nouveau_print_bitfield_names(val, namelist) \
nouveau_print_bitfield_names_((val), (namelist), ARRAY_SIZE(namelist))
+struct nouveau_enum_names {
+ uint32_t value;
+ const char *name;
+};
+
+static void
+nouveau_print_enum_names_(uint32_t value,
+ const struct nouveau_enum_names *namelist,
+ const int namelist_len)
+{
+ /*
+ * Caller must have already printed the KERN_* log level for us.
+ * Also the caller is responsible for adding the newline.
+ */
+ int i;
+ for (i = 0; i < namelist_len; ++i) {
+ if (value == namelist[i].value) {
+ printk("%s", namelist[i].name);
+ return;
+ }
+ }
+ printk("unknown value 0x%08x", value);
+}
+#define nouveau_print_enum_names(val, namelist) \
+ nouveau_print_enum_names_((val), (namelist), ARRAY_SIZE(namelist))
static int
nouveau_graph_chid_from_grctx(struct drm_device *dev)
struct drm_nouveau_private *dev_priv = dev->dev_private;
uint32_t nsource = trap->nsource, nstatus = trap->nstatus;
- NV_INFO(dev, "%s - nSource:", id);
- nouveau_print_bitfield_names(nsource, nsource_names);
- printk(", nStatus:");
- if (dev_priv->card_type < NV_10)
- nouveau_print_bitfield_names(nstatus, nstatus_names);
- else
- nouveau_print_bitfield_names(nstatus, nstatus_names_nv10);
- printk("\n");
+ if (dev_priv->card_type < NV_50) {
+ NV_INFO(dev, "%s - nSource:", id);
+ nouveau_print_bitfield_names(nsource, nsource_names);
+ printk(", nStatus:");
+ if (dev_priv->card_type < NV_10)
+ nouveau_print_bitfield_names(nstatus, nstatus_names);
+ else
+ nouveau_print_bitfield_names(nstatus, nstatus_names_nv10);
+ printk("\n");
+ }
NV_INFO(dev, "%s - Ch %d/%d Class 0x%04x Mthd 0x%04x "
"Data 0x%08x:0x%08x\n",
nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING);
}
+static void
+nv50_pfb_vm_trap(struct drm_device *dev, int display, const char *name)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t trap[6];
+ int i, ch;
+ uint32_t idx = nv_rd32(dev, 0x100c90);
+ if (idx & 0x80000000) {
+ idx &= 0xffffff;
+ if (display) {
+ for (i = 0; i < 6; i++) {
+ nv_wr32(dev, 0x100c90, idx | i << 24);
+ trap[i] = nv_rd32(dev, 0x100c94);
+ }
+ for (ch = 0; ch < dev_priv->engine.fifo.channels; ch++) {
+ struct nouveau_channel *chan = dev_priv->fifos[ch];
+
+ if (!chan || !chan->ramin)
+ continue;
+
+ if (trap[1] == chan->ramin->instance >> 12)
+ break;
+ }
+ NV_INFO(dev, "%s - VM: Trapped %s at %02x%04x%04x status %08x %08x channel %d\n",
+ name, (trap[5]&0x100?"read":"write"),
+ trap[5]&0xff, trap[4]&0xffff,
+ trap[3]&0xffff, trap[0], trap[2], ch);
+ }
+ nv_wr32(dev, 0x100c90, idx | 0x80000000);
+ } else if (display) {
+ NV_INFO(dev, "%s - no VM fault?\n", name);
+ }
+}
+
+static struct nouveau_enum_names nv50_mp_exec_error_names[] =
+{
+ { 3, "STACK_UNDERFLOW" },
+ { 4, "QUADON_ACTIVE" },
+ { 8, "TIMEOUT" },
+ { 0x10, "INVALID_OPCODE" },
+ { 0x40, "BREAKPOINT" },
+};
+
+static void
+nv50_pgraph_mp_trap(struct drm_device *dev, int tpid, int display)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t units = nv_rd32(dev, 0x1540);
+ uint32_t addr, mp10, status, pc, oplow, ophigh;
+ int i;
+ int mps = 0;
+ for (i = 0; i < 4; i++) {
+ if (!(units & 1 << (i+24)))
+ continue;
+ if (dev_priv->chipset < 0xa0)
+ addr = 0x408200 + (tpid << 12) + (i << 7);
+ else
+ addr = 0x408100 + (tpid << 11) + (i << 7);
+ mp10 = nv_rd32(dev, addr + 0x10);
+ status = nv_rd32(dev, addr + 0x14);
+ if (!status)
+ continue;
+ if (display) {
+ nv_rd32(dev, addr + 0x20);
+ pc = nv_rd32(dev, addr + 0x24);
+ oplow = nv_rd32(dev, addr + 0x70);
+ ophigh= nv_rd32(dev, addr + 0x74);
+ NV_INFO(dev, "PGRAPH_TRAP_MP_EXEC - "
+ "TP %d MP %d: ", tpid, i);
+ nouveau_print_enum_names(status,
+ nv50_mp_exec_error_names);
+ printk(" at %06x warp %d, opcode %08x %08x\n",
+ pc&0xffffff, pc >> 24,
+ oplow, ophigh);
+ }
+ nv_wr32(dev, addr + 0x10, mp10);
+ nv_wr32(dev, addr + 0x14, 0);
+ mps++;
+ }
+ if (!mps && display)
+ NV_INFO(dev, "PGRAPH_TRAP_MP_EXEC - TP %d: "
+ "No MPs claiming errors?\n", tpid);
+}
+
+static void
+nv50_pgraph_tp_trap(struct drm_device *dev, int type, uint32_t ustatus_old,
+ uint32_t ustatus_new, int display, const char *name)
+{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ int tps = 0;
+ uint32_t units = nv_rd32(dev, 0x1540);
+ int i, r;
+ uint32_t ustatus_addr, ustatus;
+ for (i = 0; i < 16; i++) {
+ if (!(units & (1 << i)))
+ continue;
+ if (dev_priv->chipset < 0xa0)
+ ustatus_addr = ustatus_old + (i << 12);
+ else
+ ustatus_addr = ustatus_new + (i << 11);
+ ustatus = nv_rd32(dev, ustatus_addr) & 0x7fffffff;
+ if (!ustatus)
+ continue;
+ tps++;
+ switch (type) {
+ case 6: /* texture error... unknown for now */
+ nv50_pfb_vm_trap(dev, display, name);
+ if (display) {
+ NV_ERROR(dev, "magic set %d:\n", i);
+ for (r = ustatus_addr + 4; r <= ustatus_addr + 0x10; r += 4)
+ NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
+ nv_rd32(dev, r));
+ }
+ break;
+ case 7: /* MP error */
+ if (ustatus & 0x00010000) {
+ nv50_pgraph_mp_trap(dev, i, display);
+ ustatus &= ~0x00010000;
+ }
+ break;
+ case 8: /* TPDMA error */
+ {
+ uint32_t e0c = nv_rd32(dev, ustatus_addr + 4);
+ uint32_t e10 = nv_rd32(dev, ustatus_addr + 8);
+ uint32_t e14 = nv_rd32(dev, ustatus_addr + 0xc);
+ uint32_t e18 = nv_rd32(dev, ustatus_addr + 0x10);
+ uint32_t e1c = nv_rd32(dev, ustatus_addr + 0x14);
+ uint32_t e20 = nv_rd32(dev, ustatus_addr + 0x18);
+ uint32_t e24 = nv_rd32(dev, ustatus_addr + 0x1c);
+ nv50_pfb_vm_trap(dev, display, name);
+ /* 2d engine destination */
+ if (ustatus & 0x00000010) {
+ if (display) {
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA_2D - TP %d - Unknown fault at address %02x%08x\n",
+ i, e14, e10);
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA_2D - TP %d - e0c: %08x, e18: %08x, e1c: %08x, e20: %08x, e24: %08x\n",
+ i, e0c, e18, e1c, e20, e24);
+ }
+ ustatus &= ~0x00000010;
+ }
+ /* Render target */
+ if (ustatus & 0x00000040) {
+ if (display) {
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA_RT - TP %d - Unknown fault at address %02x%08x\n",
+ i, e14, e10);
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA_RT - TP %d - e0c: %08x, e18: %08x, e1c: %08x, e20: %08x, e24: %08x\n",
+ i, e0c, e18, e1c, e20, e24);
+ }
+ ustatus &= ~0x00000040;
+ }
+ /* CUDA memory: l[], g[] or stack. */
+ if (ustatus & 0x00000080) {
+ if (display) {
+ if (e18 & 0x80000000) {
+ /* g[] read fault? */
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA - TP %d - Global read fault at address %02x%08x\n",
+ i, e14, e10 | ((e18 >> 24) & 0x1f));
+ e18 &= ~0x1f000000;
+ } else if (e18 & 0xc) {
+ /* g[] write fault? */
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA - TP %d - Global write fault at address %02x%08x\n",
+ i, e14, e10 | ((e18 >> 7) & 0x1f));
+ e18 &= ~0x00000f80;
+ } else {
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA - TP %d - Unknown CUDA fault at address %02x%08x\n",
+ i, e14, e10);
+ }
+ NV_INFO(dev, "PGRAPH_TRAP_TPDMA - TP %d - e0c: %08x, e18: %08x, e1c: %08x, e20: %08x, e24: %08x\n",
+ i, e0c, e18, e1c, e20, e24);
+ }
+ ustatus &= ~0x00000080;
+ }
+ }
+ break;
+ }
+ if (ustatus) {
+ if (display)
+ NV_INFO(dev, "%s - TP%d: Unhandled ustatus 0x%08x\n", name, i, ustatus);
+ }
+ nv_wr32(dev, ustatus_addr, 0xc0000000);
+ }
+
+ if (!tps && display)
+ NV_INFO(dev, "%s - No TPs claiming errors?\n", name);
+}
+
+static void
+nv50_pgraph_trap_handler(struct drm_device *dev)
+{
+ struct nouveau_pgraph_trap trap;
+ uint32_t status = nv_rd32(dev, 0x400108);
+ uint32_t ustatus;
+ int display = nouveau_ratelimit();
+
+
+ if (!status && display) {
+ nouveau_graph_trap_info(dev, &trap);
+ nouveau_graph_dump_trap_info(dev, "PGRAPH_TRAP", &trap);
+ NV_INFO(dev, "PGRAPH_TRAP - no units reporting traps?\n");
+ }
+
+ /* DISPATCH: Relays commands to other units and handles NOTIFY,
+ * COND, QUERY. If you get a trap from it, the command is still stuck
+ * in DISPATCH and you need to do something about it. */
+ if (status & 0x001) {
+ ustatus = nv_rd32(dev, 0x400804) & 0x7fffffff;
+ if (!ustatus && display) {
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH - no ustatus?\n");
+ }
+
+ /* Known to be triggered by screwed up NOTIFY and COND... */
+ if (ustatus & 0x00000001) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_DISPATCH_FAULT");
+ nv_wr32(dev, 0x400500, 0);
+ if (nv_rd32(dev, 0x400808) & 0x80000000) {
+ if (display) {
+ if (nouveau_graph_trapped_channel(dev, &trap.channel))
+ trap.channel = -1;
+ trap.class = nv_rd32(dev, 0x400814);
+ trap.mthd = nv_rd32(dev, 0x400808) & 0x1ffc;
+ trap.subc = (nv_rd32(dev, 0x400808) >> 16) & 0x7;
+ trap.data = nv_rd32(dev, 0x40080c);
+ trap.data2 = nv_rd32(dev, 0x400810);
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_TRAP_DISPATCH_FAULT", &trap);
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH_FAULT - 400808: %08x\n", nv_rd32(dev, 0x400808));
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH_FAULT - 400848: %08x\n", nv_rd32(dev, 0x400848));
+ }
+ nv_wr32(dev, 0x400808, 0);
+ } else if (display) {
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH_FAULT - No stuck command?\n");
+ }
+ nv_wr32(dev, 0x4008e8, nv_rd32(dev, 0x4008e8) & 3);
+ nv_wr32(dev, 0x400848, 0);
+ ustatus &= ~0x00000001;
+ }
+ if (ustatus & 0x00000002) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_DISPATCH_QUERY");
+ nv_wr32(dev, 0x400500, 0);
+ if (nv_rd32(dev, 0x40084c) & 0x80000000) {
+ if (display) {
+ if (nouveau_graph_trapped_channel(dev, &trap.channel))
+ trap.channel = -1;
+ trap.class = nv_rd32(dev, 0x400814);
+ trap.mthd = nv_rd32(dev, 0x40084c) & 0x1ffc;
+ trap.subc = (nv_rd32(dev, 0x40084c) >> 16) & 0x7;
+ trap.data = nv_rd32(dev, 0x40085c);
+ trap.data2 = 0;
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_TRAP_DISPATCH_QUERY", &trap);
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH_QUERY - 40084c: %08x\n", nv_rd32(dev, 0x40084c));
+ }
+ nv_wr32(dev, 0x40084c, 0);
+ } else if (display) {
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH_QUERY - No stuck command?\n");
+ }
+ ustatus &= ~0x00000002;
+ }
+ if (ustatus && display)
+ NV_INFO(dev, "PGRAPH_TRAP_DISPATCH - Unhandled ustatus 0x%08x\n", ustatus);
+ nv_wr32(dev, 0x400804, 0xc0000000);
+ nv_wr32(dev, 0x400108, 0x001);
+ status &= ~0x001;
+ }
+
+ /* TRAPs other than dispatch use the "normal" trap regs. */
+ if (status && display) {
+ nouveau_graph_trap_info(dev, &trap);
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_TRAP", &trap);
+ }
+
+ /* M2MF: Memory to memory copy engine. */
+ if (status & 0x002) {
+ ustatus = nv_rd32(dev, 0x406800) & 0x7fffffff;
+ if (!ustatus && display) {
+ NV_INFO(dev, "PGRAPH_TRAP_M2MF - no ustatus?\n");
+ }
+ if (ustatus & 0x00000001) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_M2MF_NOTIFY");
+ ustatus &= ~0x00000001;
+ }
+ if (ustatus & 0x00000002) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_M2MF_IN");
+ ustatus &= ~0x00000002;
+ }
+ if (ustatus & 0x00000004) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_M2MF_OUT");
+ ustatus &= ~0x00000004;
+ }
+ NV_INFO (dev, "PGRAPH_TRAP_M2MF - %08x %08x %08x %08x\n",
+ nv_rd32(dev, 0x406804),
+ nv_rd32(dev, 0x406808),
+ nv_rd32(dev, 0x40680c),
+ nv_rd32(dev, 0x406810));
+ if (ustatus && display)
+ NV_INFO(dev, "PGRAPH_TRAP_M2MF - Unhandled ustatus 0x%08x\n", ustatus);
+ /* No sane way found yet -- just reset the bugger. */
+ nv_wr32(dev, 0x400040, 2);
+ nv_wr32(dev, 0x400040, 0);
+ nv_wr32(dev, 0x406800, 0xc0000000);
+ nv_wr32(dev, 0x400108, 0x002);
+ status &= ~0x002;
+ }
+
+ /* VFETCH: Fetches data from vertex buffers. */
+ if (status & 0x004) {
+ ustatus = nv_rd32(dev, 0x400c04) & 0x7fffffff;
+ if (!ustatus && display) {
+ NV_INFO(dev, "PGRAPH_TRAP_VFETCH - no ustatus?\n");
+ }
+ if (ustatus & 0x00000001) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_VFETCH_FAULT");
+ NV_INFO (dev, "PGRAPH_TRAP_VFETCH_FAULT - %08x %08x %08x %08x\n",
+ nv_rd32(dev, 0x400c00),
+ nv_rd32(dev, 0x400c08),
+ nv_rd32(dev, 0x400c0c),
+ nv_rd32(dev, 0x400c10));
+ ustatus &= ~0x00000001;
+ }
+ if (ustatus && display)
+ NV_INFO(dev, "PGRAPH_TRAP_VFETCH - Unhandled ustatus 0x%08x\n", ustatus);
+ nv_wr32(dev, 0x400c04, 0xc0000000);
+ nv_wr32(dev, 0x400108, 0x004);
+ status &= ~0x004;
+ }
+
+ /* STRMOUT: DirectX streamout / OpenGL transform feedback. */
+ if (status & 0x008) {
+ ustatus = nv_rd32(dev, 0x401800) & 0x7fffffff;
+ if (!ustatus && display) {
+ NV_INFO(dev, "PGRAPH_TRAP_STRMOUT - no ustatus?\n");
+ }
+ if (ustatus & 0x00000001) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_STRMOUT_FAULT");
+ NV_INFO (dev, "PGRAPH_TRAP_STRMOUT_FAULT - %08x %08x %08x %08x\n",
+ nv_rd32(dev, 0x401804),
+ nv_rd32(dev, 0x401808),
+ nv_rd32(dev, 0x40180c),
+ nv_rd32(dev, 0x401810));
+ ustatus &= ~0x00000001;
+ }
+ if (ustatus && display)
+ NV_INFO(dev, "PGRAPH_TRAP_STRMOUT - Unhandled ustatus 0x%08x\n", ustatus);
+ /* No sane way found yet -- just reset the bugger. */
+ nv_wr32(dev, 0x400040, 0x80);
+ nv_wr32(dev, 0x400040, 0);
+ nv_wr32(dev, 0x401800, 0xc0000000);
+ nv_wr32(dev, 0x400108, 0x008);
+ status &= ~0x008;
+ }
+
+ /* CCACHE: Handles code and c[] caches and fills them. */
+ if (status & 0x010) {
+ ustatus = nv_rd32(dev, 0x405018) & 0x7fffffff;
+ if (!ustatus && display) {
+ NV_INFO(dev, "PGRAPH_TRAP_CCACHE - no ustatus?\n");
+ }
+ if (ustatus & 0x00000001) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_CCACHE_FAULT");
+ NV_INFO (dev, "PGRAPH_TRAP_CCACHE_FAULT - %08x %08x %08x %08x %08x %08x %08x\n",
+ nv_rd32(dev, 0x405800),
+ nv_rd32(dev, 0x405804),
+ nv_rd32(dev, 0x405808),
+ nv_rd32(dev, 0x40580c),
+ nv_rd32(dev, 0x405810),
+ nv_rd32(dev, 0x405814),
+ nv_rd32(dev, 0x40581c));
+ ustatus &= ~0x00000001;
+ }
+ if (ustatus && display)
+ NV_INFO(dev, "PGRAPH_TRAP_CCACHE - Unhandled ustatus 0x%08x\n", ustatus);
+ nv_wr32(dev, 0x405018, 0xc0000000);
+ nv_wr32(dev, 0x400108, 0x010);
+ status &= ~0x010;
+ }
+
+ /* Unknown, not seen yet... 0x402000 is the only trap status reg
+ * remaining, so try to handle it anyway. Perhaps related to that
+ * unknown DMA slot on tesla? */
+ if (status & 0x20) {
+ nv50_pfb_vm_trap(dev, display, "PGRAPH_TRAP_UNKC04");
+ ustatus = nv_rd32(dev, 0x402000) & 0x7fffffff;
+ if (display)
+ NV_INFO(dev, "PGRAPH_TRAP_UNKC04 - Unhandled ustatus 0x%08x\n", ustatus);
+ nv_wr32(dev, 0x402000, 0xc0000000);
+ /* no status modifiction on purpose */
+ }
+
+ /* TEXTURE: CUDA texturing units */
+ if (status & 0x040) {
+ nv50_pgraph_tp_trap (dev, 6, 0x408900, 0x408600, display,
+ "PGRAPH_TRAP_TEXTURE");
+ nv_wr32(dev, 0x400108, 0x040);
+ status &= ~0x040;
+ }
+
+ /* MP: CUDA execution engines. */
+ if (status & 0x080) {
+ nv50_pgraph_tp_trap (dev, 7, 0x408314, 0x40831c, display,
+ "PGRAPH_TRAP_MP");
+ nv_wr32(dev, 0x400108, 0x080);
+ status &= ~0x080;
+ }
+
+ /* TPDMA: Handles TP-initiated uncached memory accesses:
+ * l[], g[], stack, 2d surfaces, render targets. */
+ if (status & 0x100) {
+ nv50_pgraph_tp_trap (dev, 8, 0x408e08, 0x408708, display,
+ "PGRAPH_TRAP_TPDMA");
+ nv_wr32(dev, 0x400108, 0x100);
+ status &= ~0x100;
+ }
+
+ if (status) {
+ if (display)
+ NV_INFO(dev, "PGRAPH_TRAP - Unknown trap 0x%08x\n",
+ status);
+ nv_wr32(dev, 0x400108, status);
+ }
+}
+
+/* There must be a *lot* of these. Will take some time to gather them up. */
+static struct nouveau_enum_names nv50_data_error_names[] =
+{
+ { 4, "INVALID_VALUE" },
+ { 5, "INVALID_ENUM" },
+ { 8, "INVALID_OBJECT" },
+ { 0xc, "INVALID_BITFIELD" },
+ { 0x28, "MP_NO_REG_SPACE" },
+ { 0x2b, "MP_BLOCK_SIZE_MISMATCH" },
+};
+
static void
nv50_pgraph_irq_handler(struct drm_device *dev)
{
+ struct nouveau_pgraph_trap trap;
+ int unhandled = 0;
uint32_t status;
while ((status = nv_rd32(dev, NV03_PGRAPH_INTR))) {
- uint32_t nsource = nv_rd32(dev, NV03_PGRAPH_NSOURCE);
-
+ /* NOTIFY: You've set a NOTIFY an a command and it's done. */
if (status & 0x00000001) {
- nouveau_pgraph_intr_notify(dev, nsource);
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_NOTIFY", &trap);
status &= ~0x00000001;
nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000001);
}
- if (status & 0x00000010) {
- nouveau_pgraph_intr_error(dev, nsource |
- NV03_PGRAPH_NSOURCE_ILLEGAL_MTHD);
+ /* COMPUTE_QUERY: Purpose and exact cause unknown, happens
+ * when you write 0x200 to 0x50c0 method 0x31c. */
+ if (status & 0x00000002) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_COMPUTE_QUERY", &trap);
+ status &= ~0x00000002;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000002);
+ }
+ /* Unknown, never seen: 0x4 */
+
+ /* ILLEGAL_MTHD: You used a wrong method for this class. */
+ if (status & 0x00000010) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_pgraph_intr_swmthd(dev, &trap))
+ unhandled = 1;
+ if (unhandled && nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_ILLEGAL_MTHD", &trap);
status &= ~0x00000010;
nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000010);
}
+ /* ILLEGAL_CLASS: You used a wrong class. */
+ if (status & 0x00000020) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_ILLEGAL_CLASS", &trap);
+ status &= ~0x00000020;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000020);
+ }
+
+ /* DOUBLE_NOTIFY: You tried to set a NOTIFY on another NOTIFY. */
+ if (status & 0x00000040) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_DOUBLE_NOTIFY", &trap);
+ status &= ~0x00000040;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00000040);
+ }
+
+ /* CONTEXT_SWITCH: PGRAPH needs us to load a new context */
if (status & 0x00001000) {
nv_wr32(dev, 0x400500, 0x00000000);
nv_wr32(dev, NV03_PGRAPH_INTR,
status &= ~NV_PGRAPH_INTR_CONTEXT_SWITCH;
}
- if (status & 0x00100000) {
- nouveau_pgraph_intr_error(dev, nsource |
- NV03_PGRAPH_NSOURCE_DATA_ERROR);
+ /* BUFFER_NOTIFY: Your m2mf transfer finished */
+ if (status & 0x00010000) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_BUFFER_NOTIFY", &trap);
+ status &= ~0x00010000;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x00010000);
+ }
+ /* DATA_ERROR: Invalid value for this method, or invalid
+ * state in current PGRAPH context for this operation */
+ if (status & 0x00100000) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit()) {
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_DATA_ERROR", &trap);
+ NV_INFO (dev, "PGRAPH_DATA_ERROR - ");
+ nouveau_print_enum_names(nv_rd32(dev, 0x400110),
+ nv50_data_error_names);
+ printk("\n");
+ }
status &= ~0x00100000;
nv_wr32(dev, NV03_PGRAPH_INTR, 0x00100000);
}
+ /* TRAP: Something bad happened in the middle of command
+ * execution. Has a billion types, subtypes, and even
+ * subsubtypes. */
if (status & 0x00200000) {
- int r;
-
- nouveau_pgraph_intr_error(dev, nsource |
- NV03_PGRAPH_NSOURCE_PROTECTION_ERROR);
-
- NV_ERROR(dev, "magic set 1:\n");
- for (r = 0x408900; r <= 0x408910; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
- nv_rd32(dev, r));
- nv_wr32(dev, 0x408900,
- nv_rd32(dev, 0x408904) | 0xc0000000);
- for (r = 0x408e08; r <= 0x408e24; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
- nv_rd32(dev, r));
- nv_wr32(dev, 0x408e08,
- nv_rd32(dev, 0x408e08) | 0xc0000000);
-
- NV_ERROR(dev, "magic set 2:\n");
- for (r = 0x409900; r <= 0x409910; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
- nv_rd32(dev, r));
- nv_wr32(dev, 0x409900,
- nv_rd32(dev, 0x409904) | 0xc0000000);
- for (r = 0x409e08; r <= 0x409e24; r += 4)
- NV_ERROR(dev, "\t0x%08x: 0x%08x\n", r,
- nv_rd32(dev, r));
- nv_wr32(dev, 0x409e08,
- nv_rd32(dev, 0x409e08) | 0xc0000000);
-
+ nv50_pgraph_trap_handler(dev);
status &= ~0x00200000;
- nv_wr32(dev, NV03_PGRAPH_NSOURCE, nsource);
nv_wr32(dev, NV03_PGRAPH_INTR, 0x00200000);
}
+ /* Unknown, never seen: 0x00400000 */
+
+ /* SINGLE_STEP: Happens on every method if you turned on
+ * single stepping in 40008c */
+ if (status & 0x01000000) {
+ nouveau_graph_trap_info(dev, &trap);
+ if (nouveau_ratelimit())
+ nouveau_graph_dump_trap_info(dev,
+ "PGRAPH_SINGLE_STEP", &trap);
+ status &= ~0x01000000;
+ nv_wr32(dev, NV03_PGRAPH_INTR, 0x01000000);
+ }
+
+ /* 0x02000000 happens when you pause a ctxprog...
+ * but the only way this can happen that I know is by
+ * poking the relevant MMIO register, and we don't
+ * do that. */
+
if (status) {
NV_INFO(dev, "Unhandled PGRAPH_INTR - 0x%08x\n",
status);
}
nv_wr32(dev, NV03_PMC_INTR_0, NV_PMC_INTR_0_PGRAPH_PENDING);
- nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
+ if (nv_rd32(dev, 0x400824) & (1 << 31))
+ nv_wr32(dev, 0x400824, nv_rd32(dev, 0x400824) & ~(1 << 31));
}
static void
return -EBUSY;
}
+ nv_wr32(dev, 0x100c80, 0x00040001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+ return -EBUSY;
+ }
+
+ nv_wr32(dev, 0x100c80, 0x00060001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+ return -EBUSY;
+ }
+
return 0;
}
}
nv_wr32(dev, 0x100c80, 0x00000001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+ return;
+ }
+
+ nv_wr32(dev, 0x100c80, 0x00040001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
+ return;
+ }
+
+ nv_wr32(dev, 0x100c80, 0x00060001);
if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
NV_ERROR(dev, "0x100c80 = 0x%08x\n", nv_rd32(dev, 0x100c80));
}
}
-/*XXX won't work on BSD because of pci_read_config_dword */
static uint32_t
-nouveau_mem_fb_amount_igp(struct drm_device *dev)
+nouveau_mem_detect_nv04(struct drm_device *dev)
+{
+ uint32_t boot0 = nv_rd32(dev, NV03_BOOT_0);
+
+ if (boot0 & 0x00000100)
+ return (((boot0 >> 12) & 0xf) * 2 + 2) * 1024 * 1024;
+
+ switch (boot0 & NV03_BOOT_0_RAM_AMOUNT) {
+ case NV04_BOOT_0_RAM_AMOUNT_32MB:
+ return 32 * 1024 * 1024;
+ case NV04_BOOT_0_RAM_AMOUNT_16MB:
+ return 16 * 1024 * 1024;
+ case NV04_BOOT_0_RAM_AMOUNT_8MB:
+ return 8 * 1024 * 1024;
+ case NV04_BOOT_0_RAM_AMOUNT_4MB:
+ return 4 * 1024 * 1024;
+ }
+
+ return 0;
+}
+
+static uint32_t
+nouveau_mem_detect_nforce(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct pci_dev *bridge;
return 0;
}
- if (dev_priv->flags&NV_NFORCE) {
+ if (dev_priv->flags & NV_NFORCE) {
pci_read_config_dword(bridge, 0x7C, &mem);
return (uint64_t)(((mem >> 6) & 31) + 1)*1024*1024;
} else
- if (dev_priv->flags&NV_NFORCE2) {
+ if (dev_priv->flags & NV_NFORCE2) {
pci_read_config_dword(bridge, 0x84, &mem);
return (uint64_t)(((mem >> 4) & 127) + 1)*1024*1024;
}
}
/* returns the amount of FB ram in bytes */
-uint64_t nouveau_mem_fb_amount(struct drm_device *dev)
+int
+nouveau_mem_detect(struct drm_device *dev)
{
struct drm_nouveau_private *dev_priv = dev->dev_private;
- uint32_t boot0;
-
- switch (dev_priv->card_type) {
- case NV_04:
- boot0 = nv_rd32(dev, NV03_BOOT_0);
- if (boot0 & 0x00000100)
- return (((boot0 >> 12) & 0xf) * 2 + 2) * 1024 * 1024;
-
- switch (boot0 & NV03_BOOT_0_RAM_AMOUNT) {
- case NV04_BOOT_0_RAM_AMOUNT_32MB:
- return 32 * 1024 * 1024;
- case NV04_BOOT_0_RAM_AMOUNT_16MB:
- return 16 * 1024 * 1024;
- case NV04_BOOT_0_RAM_AMOUNT_8MB:
- return 8 * 1024 * 1024;
- case NV04_BOOT_0_RAM_AMOUNT_4MB:
- return 4 * 1024 * 1024;
- }
- break;
- case NV_10:
- case NV_20:
- case NV_30:
- case NV_40:
- case NV_50:
- default:
- if (dev_priv->flags & (NV_NFORCE | NV_NFORCE2)) {
- return nouveau_mem_fb_amount_igp(dev);
- } else {
- uint64_t mem;
- mem = (nv_rd32(dev, NV04_FIFO_DATA) &
- NV10_FIFO_DATA_RAM_AMOUNT_MB_MASK) >>
- NV10_FIFO_DATA_RAM_AMOUNT_MB_SHIFT;
- return mem * 1024 * 1024;
- }
- break;
+
+ if (dev_priv->card_type == NV_04) {
+ dev_priv->vram_size = nouveau_mem_detect_nv04(dev);
+ } else
+ if (dev_priv->flags & (NV_NFORCE | NV_NFORCE2)) {
+ dev_priv->vram_size = nouveau_mem_detect_nforce(dev);
+ } else {
+ dev_priv->vram_size = nv_rd32(dev, NV04_FIFO_DATA);
+ dev_priv->vram_size &= NV10_FIFO_DATA_RAM_AMOUNT_MB_MASK;
+ if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
+ dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
}
- NV_ERROR(dev,
- "Unable to detect video ram size. Please report your setup to "
- DRIVER_EMAIL "\n");
- return 0;
+ NV_INFO(dev, "Detected %dMiB VRAM\n", (int)(dev_priv->vram_size >> 20));
+ if (dev_priv->vram_sys_base) {
+ NV_INFO(dev, "Stolen system memory at: 0x%010llx\n",
+ dev_priv->vram_sys_base);
+ }
+
+ if (dev_priv->vram_size)
+ return 0;
+ return -ENOMEM;
}
#if __OS_HAS_AGP
spin_lock_init(&dev_priv->ttm.bo_list_lock);
spin_lock_init(&dev_priv->tile.lock);
- dev_priv->fb_available_size = nouveau_mem_fb_amount(dev);
-
+ dev_priv->fb_available_size = dev_priv->vram_size;
dev_priv->fb_mappable_pages = dev_priv->fb_available_size;
if (dev_priv->fb_mappable_pages > drm_get_resource_len(dev, 1))
dev_priv->fb_mappable_pages = drm_get_resource_len(dev, 1);
dev_priv->fb_mappable_pages >>= PAGE_SHIFT;
- NV_INFO(dev, "%d MiB VRAM\n", (int)(dev_priv->fb_available_size >> 20));
-
/* remove reserved space at end of vram from available amount */
dev_priv->fb_available_size -= dev_priv->ramin_rsvd_vram;
dev_priv->fb_aper_free = dev_priv->fb_available_size;
#include "drmP.h"
#include "nouveau_drv.h"
#include <linux/pagemap.h>
+#include <linux/slab.h>
#define NV_CTXDMA_PAGE_SHIFT 12
#define NV_CTXDMA_PAGE_SIZE (1 << NV_CTXDMA_PAGE_SHIFT)
}
dev_priv->engine.instmem.finish_access(nvbe->dev);
+ if (dev_priv->card_type == NV_50) {
+ nv_wr32(dev, 0x100c80, 0x00050001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n",
+ nv_rd32(dev, 0x100c80));
+ return -EBUSY;
+ }
+
+ nv_wr32(dev, 0x100c80, 0x00000001);
+ if (!nv_wait(0x100c80, 0x00000001, 0x00000000)) {
+ NV_ERROR(dev, "timeout: (0x100c80 & 1) == 0 (2)\n");
+ NV_ERROR(dev, "0x100c80 = 0x%08x\n",
+ nv_rd32(dev, 0x100c80));
+ return -EBUSY;
+ }
+ }
+
nvbe->bound = false;
return 0;
}
*/
#include <linux/swab.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "drm_sarea.h"
#include "nouveau_drm.h"
#include "nv50_display.h"
-static int nouveau_stub_init(struct drm_device *dev) { return 0; }
static void nouveau_stub_takedown(struct drm_device *dev) {}
static int nouveau_init_engine_ptrs(struct drm_device *dev)
engine->timer.init = nv04_timer_init;
engine->timer.read = nv04_timer_read;
engine->timer.takedown = nv04_timer_takedown;
- engine->fb.init = nouveau_stub_init;
- engine->fb.takedown = nouveau_stub_takedown;
+ engine->fb.init = nv50_fb_init;
+ engine->fb.takedown = nv50_fb_takedown;
engine->graph.grclass = nv50_graph_grclass;
engine->graph.init = nv50_graph_init;
engine->graph.takedown = nv50_graph_takedown;
gpuobj = NULL;
ret = nouveau_gpuobj_dma_new(dev_priv->channel, NV_CLASS_DMA_IN_MEMORY,
- 0, nouveau_mem_fb_amount(dev),
+ 0, dev_priv->vram_size,
NV_DMA_ACCESS_RW, NV_DMA_TARGET_VIDMEM,
&gpuobj);
if (ret)
goto out;
}
+ ret = nouveau_mem_detect(dev);
+ if (ret)
+ goto out_bios;
+
ret = nouveau_gpuobj_early_init(dev);
if (ret)
goto out_bios;
else
ret = nv04_display_create(dev);
if (ret)
- goto out_irq;
+ goto out_channel;
}
ret = nouveau_backlight_init(dev);
return 0;
+out_channel:
+ if (dev_priv->channel) {
+ nouveau_channel_free(dev_priv->channel);
+ dev_priv->channel = NULL;
+ }
out_irq:
drm_irq_uninstall(dev);
out_fifo:
out_gpuobj:
nouveau_gpuobj_takedown(dev);
out_mem:
+ nouveau_sgdma_takedown(dev);
nouveau_mem_close(dev);
out_instmem:
engine->instmem.takedown(dev);
struct drm_framebuffer *fb = crtc->fb;
/* Calculate our timings */
- int horizDisplay = (mode->crtc_hdisplay >> 3) - 1;
- int horizStart = (mode->crtc_hsync_start >> 3) - 1;
- int horizEnd = (mode->crtc_hsync_end >> 3) - 1;
+ int horizDisplay = (mode->crtc_hdisplay >> 3) - 1;
+ int horizStart = (mode->crtc_hsync_start >> 3) + 1;
+ int horizEnd = (mode->crtc_hsync_end >> 3) + 1;
int horizTotal = (mode->crtc_htotal >> 3) - 5;
int horizBlankStart = (mode->crtc_hdisplay >> 3) - 1;
int horizBlankEnd = (mode->crtc_htotal >> 3) - 1;
return;
}
- width = ALIGN(image->width, 32);
- dsize = (width * image->height) >> 5;
+ width = ALIGN(image->width, 8);
+ dsize = ALIGN(width * image->height, 32) >> 5;
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
((image->dx + image->width) & 0xffff));
OUT_RING(chan, bg);
OUT_RING(chan, fg);
- OUT_RING(chan, (image->height << 16) | image->width);
OUT_RING(chan, (image->height << 16) | width);
+ OUT_RING(chan, (image->height << 16) | image->width);
OUT_RING(chan, (image->dy << 16) | (image->dx & 0xffff));
while (dsize) {
default:
nv_wr32(dev, 0x2230, 0);
nv_wr32(dev, NV40_PFIFO_RAMFC,
- ((nouveau_mem_fb_amount(dev) - 512 * 1024 +
+ ((dev_priv->vram_size - 512 * 1024 +
dev_priv->ramfc_offset) >> 16) | (3 << 16));
break;
}
nv_wr32(dev, 0x400b38, 0x2ffff800);
nv_wr32(dev, 0x400b3c, 0x00006000);
+ /* Tiling related stuff. */
+ switch (dev_priv->chipset) {
+ case 0x44:
+ case 0x4a:
+ nv_wr32(dev, 0x400bc4, 0x1003d888);
+ nv_wr32(dev, 0x400bbc, 0xb7a7b500);
+ break;
+ case 0x46:
+ nv_wr32(dev, 0x400bc4, 0x0000e024);
+ nv_wr32(dev, 0x400bbc, 0xb7a7b520);
+ break;
+ case 0x4c:
+ case 0x4e:
+ case 0x67:
+ nv_wr32(dev, 0x400bc4, 0x1003d888);
+ nv_wr32(dev, 0x400bbc, 0xb7a7b540);
+ break;
+ default:
+ break;
+ }
+
/* Turn all the tiling regions off. */
for (i = 0; i < pfb->num_tiles; i++)
nv40_graph_set_region_tiling(dev, i, 0, 0, 0);
}
ret = nv50_evo_dmaobj_new(chan, 0x3d, NvEvoVRAM, 0, 0x19,
- 0, nouveau_mem_fb_amount(dev));
+ 0, dev_priv->vram_size);
if (ret) {
nv50_evo_channel_del(pchan);
return ret;
/* This used to be in crtc unblank, but seems out of place there. */
nv_wr32(dev, NV50_PDISPLAY_UNK_380, 0);
/* RAM is clamped to 256 MiB. */
- ram_amount = nouveau_mem_fb_amount(dev);
+ ram_amount = dev_priv->vram_size;
NV_DEBUG_KMS(dev, "ram_amount %d\n", ram_amount);
if (ram_amount > 256*1024*1024)
ram_amount = 256*1024*1024;
}
for (i = 0 ; i < dcb->connector.entries; i++) {
- if (i != 0 && dcb->connector.entry[i].index ==
- dcb->connector.entry[i - 1].index)
+ if (i != 0 && dcb->connector.entry[i].index2 ==
+ dcb->connector.entry[i - 1].index2)
continue;
nouveau_connector_create(dev, &dcb->connector.entry[i]);
}
ret = nv50_display_init(dev);
- if (ret)
+ if (ret) {
+ nv50_display_destroy(dev);
return ret;
+ }
return 0;
}
nv_wr32(dev, NV50_PDISPLAY_TRAPPED_ADDR, 0x90000000);
}
-static void
-nv50_display_irq_hotplug(struct drm_device *dev)
+void
+nv50_display_irq_hotplug_bh(struct work_struct *work)
{
- struct drm_nouveau_private *dev_priv = dev->dev_private;
+ struct drm_nouveau_private *dev_priv =
+ container_of(work, struct drm_nouveau_private, hpd_work);
+ struct drm_device *dev = dev_priv->dev;
struct drm_connector *connector;
const uint32_t gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
uint32_t unplug_mask, plug_mask, change_mask;
struct drm_nouveau_private *dev_priv = dev->dev_private;
uint32_t delayed = 0;
- while (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_HOTPLUG)
- nv50_display_irq_hotplug(dev);
+ if (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_HOTPLUG) {
+ if (!work_pending(&dev_priv->hpd_work))
+ queue_work(dev_priv->wq, &dev_priv->hpd_work);
+ }
while (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_DISPLAY) {
uint32_t intr0 = nv_rd32(dev, NV50_PDISPLAY_INTR_0);
void nv50_display_irq_handler(struct drm_device *dev);
void nv50_display_irq_handler_bh(struct work_struct *work);
+void nv50_display_irq_hotplug_bh(struct work_struct *work);
int nv50_display_init(struct drm_device *dev);
int nv50_display_create(struct drm_device *dev);
int nv50_display_destroy(struct drm_device *dev);
--- /dev/null
+#include "drmP.h"
+#include "drm.h"
+#include "nouveau_drv.h"
+#include "nouveau_drm.h"
+
+int
+nv50_fb_init(struct drm_device *dev)
+{
+ /* This is needed to get meaningful information from 100c90
+ * on traps. No idea what these values mean exactly. */
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+ switch (dev_priv->chipset) {
+ case 0x50:
+ nv_wr32(dev, 0x100c90, 0x0707ff);
+ break;
+ case 0xa5:
+ case 0xa8:
+ nv_wr32(dev, 0x100c90, 0x0d0fff);
+ break;
+ default:
+ nv_wr32(dev, 0x100c90, 0x1d07ff);
+ break;
+ }
+
+ return 0;
+}
+
+void
+nv50_fb_takedown(struct drm_device *dev)
+{
+}
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *chan = dev_priv->channel;
struct nouveau_gpuobj *eng2d = NULL;
+ uint64_t fb;
int ret, format;
+ fb = info->fix.smem_start - dev_priv->fb_phys + dev_priv->vm_vram_base;
+
switch (info->var.bits_per_pixel) {
case 8:
format = 0xf3;
BEGIN_RING(chan, NvSub2D, 0x0808, 3);
OUT_RING(chan, 0);
OUT_RING(chan, 0);
- OUT_RING(chan, 0);
+ OUT_RING(chan, 1);
BEGIN_RING(chan, NvSub2D, 0x081c, 1);
OUT_RING(chan, 1);
BEGIN_RING(chan, NvSub2D, 0x0840, 4);
OUT_RING(chan, info->fix.line_length);
OUT_RING(chan, info->var.xres_virtual);
OUT_RING(chan, info->var.yres_virtual);
- OUT_RING(chan, 0);
- OUT_RING(chan, info->fix.smem_start - dev_priv->fb_phys +
- dev_priv->vm_vram_base);
+ OUT_RING(chan, upper_32_bits(fb));
+ OUT_RING(chan, lower_32_bits(fb));
BEGIN_RING(chan, NvSub2D, 0x0230, 2);
OUT_RING(chan, format);
OUT_RING(chan, 1);
OUT_RING(chan, info->fix.line_length);
OUT_RING(chan, info->var.xres_virtual);
OUT_RING(chan, info->var.yres_virtual);
- OUT_RING(chan, 0);
- OUT_RING(chan, info->fix.smem_start - dev_priv->fb_phys +
- dev_priv->vm_vram_base);
+ OUT_RING(chan, upper_32_bits(fb));
+ OUT_RING(chan, lower_32_bits(fb));
return 0;
}
--- /dev/null
+/*
+ * Copyright 2010 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs
+ */
+
+#include "drmP.h"
+#include "nouveau_drv.h"
+#include "nouveau_hw.h"
+
+static int
+nv50_gpio_location(struct dcb_gpio_entry *gpio, uint32_t *reg, uint32_t *shift)
+{
+ const uint32_t nv50_gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
+
+ if (gpio->line > 32)
+ return -EINVAL;
+
+ *reg = nv50_gpio_reg[gpio->line >> 3];
+ *shift = (gpio->line & 7) << 2;
+ return 0;
+}
+
+int
+nv50_gpio_get(struct drm_device *dev, enum dcb_gpio_tag tag)
+{
+ struct dcb_gpio_entry *gpio;
+ uint32_t r, s, v;
+
+ gpio = nouveau_bios_gpio_entry(dev, tag);
+ if (!gpio)
+ return -ENOENT;
+
+ if (nv50_gpio_location(gpio, &r, &s))
+ return -EINVAL;
+
+ v = nv_rd32(dev, r) >> (s + 2);
+ return ((v & 1) == (gpio->state[1] & 1));
+}
+
+int
+nv50_gpio_set(struct drm_device *dev, enum dcb_gpio_tag tag, int state)
+{
+ struct dcb_gpio_entry *gpio;
+ uint32_t r, s, v;
+
+ gpio = nouveau_bios_gpio_entry(dev, tag);
+ if (!gpio)
+ return -ENOENT;
+
+ if (nv50_gpio_location(gpio, &r, &s))
+ return -EINVAL;
+
+ v = nv_rd32(dev, r) & ~(0x3 << s);
+ v |= (gpio->state[state] ^ 2) << s;
+ nv_wr32(dev, r, v);
+ return 0;
+}
static void
nv50_graph_init_regs__nv(struct drm_device *dev)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
+ uint32_t units = nv_rd32(dev, 0x1540);
+ int i;
+
NV_DEBUG(dev, "\n");
nv_wr32(dev, 0x400804, 0xc0000000);
nv_wr32(dev, 0x405018, 0xc0000000);
nv_wr32(dev, 0x402000, 0xc0000000);
+ for (i = 0; i < 16; i++) {
+ if (units & 1 << i) {
+ if (dev_priv->chipset < 0xa0) {
+ nv_wr32(dev, 0x408900 + (i << 12), 0xc0000000);
+ nv_wr32(dev, 0x408e08 + (i << 12), 0xc0000000);
+ nv_wr32(dev, 0x408314 + (i << 12), 0xc0000000);
+ } else {
+ nv_wr32(dev, 0x408600 + (i << 11), 0xc0000000);
+ nv_wr32(dev, 0x408708 + (i << 11), 0xc0000000);
+ nv_wr32(dev, 0x40831c + (i << 11), 0xc0000000);
+ }
+ }
+ }
+
nv_wr32(dev, 0x400108, 0xffffffff);
nv_wr32(dev, 0x400824, 0x00004000);
nouveau_grctx_vals_load(dev, ctx);
}
nv_wo32(dev, ctx, 0x00000/4, chan->ramin->instance >> 12);
- if ((dev_priv->chipset & 0xf0) == 0xa0)
- nv_wo32(dev, ctx, 0x00004/4, 0x00000000);
- else
- nv_wo32(dev, ctx, 0x0011c/4, 0x00000000);
dev_priv->engine.instmem.finish_access(dev);
return 0;
{ 0x5039, false, NULL }, /* m2mf */
{ 0x502d, false, NULL }, /* 2d */
{ 0x50c0, false, NULL }, /* compute */
+ { 0x85c0, false, NULL }, /* compute (nva3, nva5, nva8) */
{ 0x5097, false, NULL }, /* tesla (nv50) */
- { 0x8297, false, NULL }, /* tesla (nv80/nv90) */
- { 0x8397, false, NULL }, /* tesla (nva0) */
- { 0x8597, false, NULL }, /* tesla (nva8) */
+ { 0x8297, false, NULL }, /* tesla (nv8x/nv9x) */
+ { 0x8397, false, NULL }, /* tesla (nva0, nvaa, nvac) */
+ { 0x8597, false, NULL }, /* tesla (nva3, nva5, nva8) */
{}
};
#define CP_FLAG_AUTO_LOAD ((2 * 32) + 5)
#define CP_FLAG_AUTO_LOAD_NOT_PENDING 0
#define CP_FLAG_AUTO_LOAD_PENDING 1
+#define CP_FLAG_NEWCTX ((2 * 32) + 10)
+#define CP_FLAG_NEWCTX_BUSY 0
+#define CP_FLAG_NEWCTX_DONE 1
#define CP_FLAG_XFER ((2 * 32) + 11)
#define CP_FLAG_XFER_IDLE 0
#define CP_FLAG_XFER_BUSY 1
-#define CP_FLAG_NEWCTX ((2 * 32) + 12)
-#define CP_FLAG_NEWCTX_BUSY 0
-#define CP_FLAG_NEWCTX_DONE 1
#define CP_FLAG_ALWAYS ((2 * 32) + 13)
#define CP_FLAG_ALWAYS_FALSE 0
#define CP_FLAG_ALWAYS_TRUE 1
+#define CP_FLAG_INTR ((2 * 32) + 15)
+#define CP_FLAG_INTR_NOT_PENDING 0
+#define CP_FLAG_INTR_PENDING 1
#define CP_CTX 0x00100000
#define CP_CTX_COUNT 0x000f0000
case 0x96:
case 0x98:
case 0xa0:
+ case 0xa3:
case 0xa5:
case 0xa8:
case 0xaa:
cp_name(ctx, cp_setup_save);
cp_set (ctx, UNK1D, SET);
cp_wait(ctx, STATUS, BUSY);
+ cp_wait(ctx, INTR, PENDING);
+ cp_bra (ctx, STATUS, BUSY, cp_setup_save);
cp_set (ctx, UNK01, SET);
cp_set (ctx, SWAP_DIRECTION, SAVE);
int offset, base;
uint32_t units = nv_rd32 (ctx->dev, 0x1540);
- /* 0800 */
+ /* 0800: DISPATCH */
cp_ctx(ctx, 0x400808, 7);
gr_def(ctx, 0x400814, 0x00000030);
cp_ctx(ctx, 0x400834, 0x32);
gr_def(ctx, 0x400b20, 0x0001629d);
}
- /* 0C00 */
+ /* 0C00: VFETCH */
cp_ctx(ctx, 0x400c08, 0x2);
gr_def(ctx, 0x400c08, 0x0000fe0c);
cp_ctx(ctx, 0x401540, 0x5);
gr_def(ctx, 0x401550, 0x00001018);
- /* 1800 */
+ /* 1800: STREAMOUT */
cp_ctx(ctx, 0x401814, 0x1);
gr_def(ctx, 0x401814, 0x000000ff);
if (dev_priv->chipset == 0x50) {
case 0xac:
gr_def(ctx, 0x401c00, 0x042500df);
break;
+ case 0xa3:
case 0xa5:
case 0xa8:
gr_def(ctx, 0x401c00, 0x142500df);
break;
case 0x84:
case 0xa0:
+ case 0xa3:
case 0xa5:
case 0xa8:
case 0xaa:
if (dev_priv->chipset == 0x50)
cp_ctx(ctx, 0x4063e0, 0x1);
- /* 6800 */
+ /* 6800: M2MF */
if (dev_priv->chipset < 0x90) {
cp_ctx(ctx, 0x406814, 0x2b);
gr_def(ctx, 0x406818, 0x00000f80);
case 0xa5:
gr_def(ctx, offset + 0x1c, 0x310c0000);
break;
+ case 0xa3:
case 0xa8:
case 0xaa:
case 0xac:
else
gr_def(ctx, offset + 0x8, 0x05010202);
gr_def(ctx, offset + 0xc, 0x00030201);
+ if (dev_priv->chipset == 0xa3)
+ cp_ctx(ctx, base + 0x36c, 1);
cp_ctx(ctx, base + 0x400, 2);
gr_def(ctx, base + 0x404, 0x00000040);
nv50_graph_construct_gene_unk8(ctx);
if (dev_priv->chipset == 0xa0)
xf_emit(ctx, 0x189, 0);
- else if (dev_priv->chipset < 0xa8)
+ else if (dev_priv->chipset == 0xa3)
+ xf_emit(ctx, 0xd5, 0);
+ else if (dev_priv->chipset == 0xa5)
xf_emit(ctx, 0x99, 0);
else if (dev_priv->chipset == 0xaa)
xf_emit(ctx, 0x65, 0);
ctx->ctxvals_pos = offset + 4;
if (dev_priv->chipset == 0xa0)
xf_emit(ctx, 0xa80, 0);
+ else if (dev_priv->chipset == 0xa3)
+ xf_emit(ctx, 0xa7c, 0);
else
xf_emit(ctx, 0xa7a, 0);
xf_emit(ctx, 1, 0x3fffff);
xf_emit(ctx, 0x942, 0);
break;
case 0xa0:
+ case 0xa3:
xf_emit(ctx, 0x2042, 0);
break;
case 0xa5:
struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_channel *chan;
uint32_t c_offset, c_size, c_ramfc, c_vmpd, c_base, pt_size;
+ uint32_t save_nv001700;
+ uint64_t v;
struct nv50_instmem_priv *priv;
int ret, i;
- uint32_t v, save_nv001700;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
for (i = 0x1700; i <= 0x1710; i += 4)
priv->save1700[(i-0x1700)/4] = nv_rd32(dev, i);
- if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac)
- dev_priv->vram_sys_base = nv_rd32(dev, 0x100e10) << 12;
- else
- dev_priv->vram_sys_base = 0;
-
/* Reserve the last MiB of VRAM, we should probably try to avoid
* setting up the below tables over the top of the VBIOS image at
* some point.
*/
dev_priv->ramin_rsvd_vram = 1 << 20;
- c_offset = nouveau_mem_fb_amount(dev) - dev_priv->ramin_rsvd_vram;
+ c_offset = dev_priv->vram_size - dev_priv->ramin_rsvd_vram;
c_size = 128 << 10;
c_vmpd = ((dev_priv->chipset & 0xf0) == 0x50) ? 0x1400 : 0x200;
c_ramfc = ((dev_priv->chipset & 0xf0) == 0x50) ? 0x0 : 0x20;
dev_priv->vm_gart_size = NV50_VM_BLOCK;
dev_priv->vm_vram_base = dev_priv->vm_gart_base + dev_priv->vm_gart_size;
- dev_priv->vm_vram_size = nouveau_mem_fb_amount(dev);
+ dev_priv->vm_vram_size = dev_priv->vram_size;
if (dev_priv->vm_vram_size > NV50_VM_MAX_VRAM)
dev_priv->vm_vram_size = NV50_VM_MAX_VRAM;
dev_priv->vm_vram_size = roundup(dev_priv->vm_vram_size, NV50_VM_BLOCK);
i = 0;
while (v < dev_priv->vram_sys_base + c_offset + c_size) {
- BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, v);
- BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, 0x00000000);
+ BAR0_WI32(priv->pramin_pt->gpuobj, i + 0, lower_32_bits(v));
+ BAR0_WI32(priv->pramin_pt->gpuobj, i + 4, upper_32_bits(v));
v += 0x1000;
i += 8;
}
mode_ctl = 0x0200;
break;
case OUTPUT_DP:
- mode_ctl |= 0x00050000;
+ mode_ctl |= (nv_encoder->dp.mc_unknown << 16);
if (nv_encoder->dcb->sorconf.link & 1)
mode_ctl |= 0x00000800;
else
int
nv50_sor_create(struct drm_device *dev, struct dcb_entry *entry)
{
+ struct drm_nouveau_private *dev_priv = dev->dev_private;
struct nouveau_encoder *nv_encoder = NULL;
struct drm_encoder *encoder;
bool dum;
encoder->possible_crtcs = entry->heads;
encoder->possible_clones = 0;
+ if (nv_encoder->dcb->type == OUTPUT_DP) {
+ uint32_t mc, or = nv_encoder->or;
+
+ if (dev_priv->chipset < 0x90 ||
+ dev_priv->chipset == 0x92 || dev_priv->chipset == 0xa0)
+ mc = nv_rd32(dev, NV50_PDISPLAY_SOR_MODE_CTRL_C(or));
+ else
+ mc = nv_rd32(dev, NV90_PDISPLAY_SOR_MODE_CTRL_C(or));
+
+ switch ((mc & 0x00000f00) >> 8) {
+ case 8:
+ case 9:
+ nv_encoder->dp.mc_unknown = (mc & 0x000f0000) >> 16;
+ break;
+ default:
+ break;
+ }
+
+ if (!nv_encoder->dp.mc_unknown)
+ nv_encoder->dp.mc_unknown = 5;
+ }
+
return 0;
}
#include <linux/firmware.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
radeon-y := radeon_drv.o radeon_cp.o radeon_state.o radeon_mem.o \
radeon_irq.o r300_cmdbuf.o r600_cp.o
# add KMS driver
-radeon-y += radeon_device.o radeon_kms.o \
+radeon-y += radeon_device.o radeon_asic.o radeon_kms.o \
radeon_atombios.o radeon_agp.o atombios_crtc.o radeon_combios.o \
atom.o radeon_fence.o radeon_ttm.o radeon_object.o radeon_gart.o \
radeon_legacy_crtc.o radeon_legacy_encoders.o radeon_connectors.o \
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#define ATOM_DEBUG
typedef struct {
struct atom_context *ctx;
-
uint32_t *ps, *ws;
int ps_shift;
uint16_t start;
+ unsigned last_jump;
+ unsigned long last_jump_jiffies;
+ bool abort;
} atom_exec_context;
int atom_debug = 0;
-static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params);
-void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params);
+static int atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params);
+int atom_execute_table(struct atom_context *ctx, int index, uint32_t * params);
static uint32_t atom_arg_mask[8] =
{ 0xFFFFFFFF, 0xFFFF, 0xFFFF00, 0xFFFF0000, 0xFF, 0xFF00, 0xFF0000,
static void atom_op_calltable(atom_exec_context *ctx, int *ptr, int arg)
{
int idx = U8((*ptr)++);
+ int r = 0;
+
if (idx < ATOM_TABLE_NAMES_CNT)
SDEBUG(" table: %d (%s)\n", idx, atom_table_names[idx]);
else
SDEBUG(" table: %d\n", idx);
if (U16(ctx->ctx->cmd_table + 4 + 2 * idx))
- atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift);
+ r = atom_execute_table_locked(ctx->ctx, idx, ctx->ps + ctx->ps_shift);
+ if (r) {
+ ctx->abort = true;
+ }
}
static void atom_op_clear(atom_exec_context *ctx, int *ptr, int arg)
static void atom_op_jump(atom_exec_context *ctx, int *ptr, int arg)
{
int execute = 0, target = U16(*ptr);
+ unsigned long cjiffies;
+
(*ptr) += 2;
switch (arg) {
case ATOM_COND_ABOVE:
if (arg != ATOM_COND_ALWAYS)
SDEBUG(" taken: %s\n", execute ? "yes" : "no");
SDEBUG(" target: 0x%04X\n", target);
- if (execute)
+ if (execute) {
+ if (ctx->last_jump == (ctx->start + target)) {
+ cjiffies = jiffies;
+ if (time_after(cjiffies, ctx->last_jump_jiffies)) {
+ cjiffies -= ctx->last_jump_jiffies;
+ if ((jiffies_to_msecs(cjiffies) > 1000)) {
+ DRM_ERROR("atombios stuck in loop for more than 1sec aborting\n");
+ ctx->abort = true;
+ }
+ } else {
+ /* jiffies wrap around we will just wait a little longer */
+ ctx->last_jump_jiffies = jiffies;
+ }
+ } else {
+ ctx->last_jump = ctx->start + target;
+ ctx->last_jump_jiffies = jiffies;
+ }
*ptr = ctx->start + target;
+ }
}
static void atom_op_mask(atom_exec_context *ctx, int *ptr, int arg)
uint8_t attr = U8((*ptr)++), shift;
uint32_t saved, dst;
int dptr = *ptr;
+ uint32_t dst_align = atom_dst_to_src[(attr >> 3) & 7][(attr >> 6) & 3];
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ /* op needs to full dst value */
+ dst = saved;
shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst <<= shift;
+ dst &= atom_arg_mask[dst_align];
+ dst >>= atom_arg_shift[dst_align];
SDEBUG(" dst: ");
atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
}
uint8_t attr = U8((*ptr)++), shift;
uint32_t saved, dst;
int dptr = *ptr;
+ uint32_t dst_align = atom_dst_to_src[(attr >> 3) & 7][(attr >> 6) & 3];
SDEBUG(" dst: ");
dst = atom_get_dst(ctx, arg, attr, ptr, &saved, 1);
+ /* op needs to full dst value */
+ dst = saved;
shift = atom_get_src(ctx, attr, ptr);
SDEBUG(" shift: %d\n", shift);
dst >>= shift;
+ dst &= atom_arg_mask[dst_align];
+ dst >>= atom_arg_shift[dst_align];
SDEBUG(" dst: ");
atom_put_dst(ctx, arg, attr, &dptr, dst, saved);
}
atom_op_shr, ATOM_ARG_MC}, {
atom_op_debug, 0},};
-static void atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params)
+static int atom_execute_table_locked(struct atom_context *ctx, int index, uint32_t * params)
{
int base = CU16(ctx->cmd_table + 4 + 2 * index);
int len, ws, ps, ptr;
unsigned char op;
atom_exec_context ectx;
+ int ret = 0;
if (!base)
- return;
+ return -EINVAL;
len = CU16(base + ATOM_CT_SIZE_PTR);
ws = CU8(base + ATOM_CT_WS_PTR);
ectx.ps_shift = ps / 4;
ectx.start = base;
ectx.ps = params;
+ ectx.abort = false;
+ ectx.last_jump = 0;
if (ws)
ectx.ws = kzalloc(4 * ws, GFP_KERNEL);
else
SDEBUG("%s @ 0x%04X\n", atom_op_names[op], ptr - 1);
else
SDEBUG("[%d] @ 0x%04X\n", op, ptr - 1);
+ if (ectx.abort) {
+ DRM_ERROR("atombios stuck executing %04X (len %d, WS %d, PS %d) @ 0x%04X\n",
+ base, len, ws, ps, ptr - 1);
+ ret = -EINVAL;
+ goto free;
+ }
if (op < ATOM_OP_CNT && op > 0)
opcode_table[op].func(&ectx, &ptr,
debug_depth--;
SDEBUG("<<\n");
+free:
if (ws)
kfree(ectx.ws);
+ return ret;
}
-void atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
+int atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
{
+ int r;
+
mutex_lock(&ctx->mutex);
/* reset reg block */
ctx->reg_block = 0;
ctx->fb_base = 0;
/* reset io mode */
ctx->io_mode = ATOM_IO_MM;
- atom_execute_table_locked(ctx, index, params);
+ r = atom_execute_table_locked(ctx, index, params);
mutex_unlock(&ctx->mutex);
+ return r;
}
static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 };
if (!CU16(ctx->cmd_table + 4 + 2 * ATOM_CMD_INIT))
return 1;
- atom_execute_table(ctx, ATOM_CMD_INIT, ps);
-
- return 0;
+ return atom_execute_table(ctx, ATOM_CMD_INIT, ps);
}
void atom_destroy(struct atom_context *ctx)
kfree(ctx);
}
-void atom_parse_data_header(struct atom_context *ctx, int index,
+bool atom_parse_data_header(struct atom_context *ctx, int index,
uint16_t * size, uint8_t * frev, uint8_t * crev,
uint16_t * data_start)
{
int offset = index * 2 + 4;
int idx = CU16(ctx->data_table + offset);
+ u16 *mdt = (u16 *)(ctx->bios + ctx->data_table + 4);
+
+ if (!mdt[index])
+ return false;
if (size)
*size = CU16(idx);
if (crev)
*crev = CU8(idx + 3);
*data_start = idx;
- return;
+ return true;
}
-void atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t * frev,
+bool atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t * frev,
uint8_t * crev)
{
int offset = index * 2 + 4;
int idx = CU16(ctx->cmd_table + offset);
+ u16 *mct = (u16 *)(ctx->bios + ctx->cmd_table + 4);
+
+ if (!mct[index])
+ return false;
if (frev)
*frev = CU8(idx + 2);
if (crev)
*crev = CU8(idx + 3);
- return;
+ return true;
}
int atom_allocate_fb_scratch(struct atom_context *ctx)
{
int index = GetIndexIntoMasterTable(DATA, VRAM_UsageByFirmware);
uint16_t data_offset;
- int usage_bytes;
+ int usage_bytes = 0;
struct _ATOM_VRAM_USAGE_BY_FIRMWARE *firmware_usage;
- atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset);
+ if (atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset)) {
+ firmware_usage = (struct _ATOM_VRAM_USAGE_BY_FIRMWARE *)(ctx->bios + data_offset);
- firmware_usage = (struct _ATOM_VRAM_USAGE_BY_FIRMWARE *)(ctx->bios + data_offset);
+ DRM_DEBUG("atom firmware requested %08x %dkb\n",
+ firmware_usage->asFirmwareVramReserveInfo[0].ulStartAddrUsedByFirmware,
+ firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb);
- DRM_DEBUG("atom firmware requested %08x %dkb\n",
- firmware_usage->asFirmwareVramReserveInfo[0].ulStartAddrUsedByFirmware,
- firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb);
-
- usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
+ usage_bytes = firmware_usage->asFirmwareVramReserveInfo[0].usFirmwareUseInKb * 1024;
+ }
if (usage_bytes == 0)
usage_bytes = 20 * 1024;
/* allocate some scratch memory */
extern int atom_debug;
struct atom_context *atom_parse(struct card_info *, void *);
-void atom_execute_table(struct atom_context *, int, uint32_t *);
+int atom_execute_table(struct atom_context *, int, uint32_t *);
int atom_asic_init(struct atom_context *);
void atom_destroy(struct atom_context *);
-void atom_parse_data_header(struct atom_context *ctx, int index, uint16_t *size, uint8_t *frev, uint8_t *crev, uint16_t *data_start);
-void atom_parse_cmd_header(struct atom_context *ctx, int index, uint8_t *frev, uint8_t *crev);
+bool atom_parse_data_header(struct atom_context *ctx, int index, uint16_t *size,
+ uint8_t *frev, uint8_t *crev, uint16_t *data_start);
+bool atom_parse_cmd_header(struct atom_context *ctx, int index,
+ uint8_t *frev, uint8_t *crev);
int atom_allocate_fb_scratch(struct atom_context *ctx);
#include "atom-types.h"
#include "atombios.h"
UCHAR ucTV_BootUpDefaultStandard;
UCHAR ucExt_TV_ASIC_ID;
UCHAR ucExt_TV_ASIC_SlaveAddr;
- ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING];
+ ATOM_DTD_FORMAT aModeTimings[MAX_SUPPORTED_TV_TIMING_V1_2];
}ATOM_ANALOG_TV_INFO_V1_2;
typedef struct _ATOM_DPCD_INFO
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+static void atombios_disable_ss(struct drm_crtc *crtc)
+{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ u32 ss_cntl;
+
+ if (ASIC_IS_DCE4(rdev)) {
+ switch (radeon_crtc->pll_id) {
+ case ATOM_PPLL1:
+ ss_cntl = RREG32(EVERGREEN_P1PLL_SS_CNTL);
+ ss_cntl &= ~EVERGREEN_PxPLL_SS_EN;
+ WREG32(EVERGREEN_P1PLL_SS_CNTL, ss_cntl);
+ break;
+ case ATOM_PPLL2:
+ ss_cntl = RREG32(EVERGREEN_P2PLL_SS_CNTL);
+ ss_cntl &= ~EVERGREEN_PxPLL_SS_EN;
+ WREG32(EVERGREEN_P2PLL_SS_CNTL, ss_cntl);
+ break;
+ case ATOM_DCPLL:
+ case ATOM_PPLL_INVALID:
+ return;
+ }
+ } else if (ASIC_IS_AVIVO(rdev)) {
+ switch (radeon_crtc->pll_id) {
+ case ATOM_PPLL1:
+ ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL);
+ ss_cntl &= ~1;
+ WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl);
+ break;
+ case ATOM_PPLL2:
+ ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL);
+ ss_cntl &= ~1;
+ WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl);
+ break;
+ case ATOM_DCPLL:
+ case ATOM_PPLL_INVALID:
+ return;
+ }
+ }
+}
+
+
union atom_enable_ss {
ENABLE_LVDS_SS_PARAMETERS legacy;
ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION v1;
};
-static void atombios_set_ss(struct drm_crtc *crtc, int enable)
+static void atombios_enable_ss(struct drm_crtc *crtc)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
step = dig->ss->step;
delay = dig->ss->delay;
range = dig->ss->range;
- } else if (enable)
+ } else
return;
- } else if (enable)
+ } else
return;
break;
}
args.v1.ucSpreadSpectrumDelay = delay;
args.v1.ucSpreadSpectrumRange = range;
args.v1.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
- args.v1.ucEnable = enable;
+ args.v1.ucEnable = ATOM_ENABLE;
} else {
args.legacy.usSpreadSpectrumPercentage = cpu_to_le16(percentage);
args.legacy.ucSpreadSpectrumType = type;
args.legacy.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2;
args.legacy.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4;
- args.legacy.ucEnable = enable;
+ args.legacy.ucEnable = ATOM_ENABLE;
}
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
adjusted_clock = mode->clock * 2;
- /* LVDS PLL quirks */
- if (encoder->encoder_type == DRM_MODE_ENCODER_LVDS) {
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- pll->algo = dig->pll_algo;
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
+ pll->algo = PLL_ALGO_LEGACY;
+ pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
}
} else {
if (encoder->encoder_type != DRM_MODE_ENCODER_DAC)
int index;
index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll);
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
- &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+ &crev))
+ return adjusted_clock;
memset(&args, 0, sizeof(args));
}
} else if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
/* may want to enable SS on DP/eDP eventually */
- args.v3.sInput.ucDispPllConfig |=
- DISPPLL_CONFIG_SS_ENABLE;
- if (mode->clock > 165000)
+ /*args.v3.sInput.ucDispPllConfig |=
+ DISPPLL_CONFIG_SS_ENABLE;*/
+ if (encoder_mode == ATOM_ENCODER_MODE_DP)
args.v3.sInput.ucDispPllConfig |=
- DISPPLL_CONFIG_DUAL_LINK;
+ DISPPLL_CONFIG_COHERENT_MODE;
+ else {
+ if (mode->clock > 165000)
+ args.v3.sInput.ucDispPllConfig |=
+ DISPPLL_CONFIG_DUAL_LINK;
+ }
}
atom_execute_table(rdev->mode_info.atom_context,
index, (uint32_t *)&args);
memset(&args, 0, sizeof(args));
index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
- &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+ &crev))
+ return;
switch (frev) {
case 1:
&ref_div, &post_div);
index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
- &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
+ &crev))
+ return;
switch (frev) {
case 1:
/* TODO color tiling */
- /* pick pll */
- radeon_crtc->pll_id = radeon_atom_pick_pll(crtc);
-
- atombios_set_ss(crtc, 0);
+ atombios_disable_ss(crtc);
/* always set DCPLL */
if (ASIC_IS_DCE4(rdev))
atombios_crtc_set_dcpll(crtc);
atombios_crtc_set_pll(crtc, adjusted_mode);
- atombios_set_ss(crtc, 1);
+ atombios_enable_ss(crtc);
if (ASIC_IS_DCE4(rdev))
atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
static void atombios_crtc_prepare(struct drm_crtc *crtc)
{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+ /* pick pll */
+ radeon_crtc->pll_id = radeon_atom_pick_pll(crtc);
+
atombios_lock_crtc(crtc, ATOM_ENABLE);
atombios_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
>> DP_TRAIN_PRE_EMPHASIS_SHIFT);
/* disable the training pattern on the sink */
+ dp_set_training(radeon_connector, DP_TRAINING_PATTERN_DISABLE);
+
+ /* disable the training pattern on the source */
if (ASIC_IS_DCE4(rdev))
atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE);
else
radeon_dp_encoder_service(rdev, ATOM_DP_ACTION_TRAINING_COMPLETE,
dig_connector->dp_clock, enc_id, 0);
-
- radeon_dp_encoder_service(rdev, ATOM_DP_ACTION_TRAINING_COMPLETE,
- dig_connector->dp_clock, enc_id, 0);
}
int radeon_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
*/
#include <linux/firmware.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "radeon_drm.h"
#include "rv770d.h"
#include "atom.h"
int evergreen_mc_init(struct radeon_device *rdev)
{
- fixed20_12 a;
u32 tmp;
int chansize, numchan;
rdev->mc.real_vram_size = rdev->mc.aper_size;
}
r600_vram_gtt_location(rdev, &rdev->mc);
- /* FIXME: we should enforce default clock in case GPU is not in
- * default setup
- */
- a.full = rfixed_const(100);
- rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
- rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ radeon_update_bandwidth_info(rdev);
+
return 0;
}
void evergreen_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
evergreen_suspend(rdev);
#if 0
r600_blit_fini(rdev);
* Jerome Glisse
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "radeon_drm.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "r100d.h"
#include "rs100d.h"
#include "rv200d.h"
void r100_pci_gart_fini(struct radeon_device *rdev)
{
+ radeon_gart_fini(rdev);
r100_pci_gart_disable(rdev);
radeon_gart_table_ram_free(rdev);
- radeon_gart_fini(rdev);
}
int r100_irq_set(struct radeon_device *rdev)
/* Vertical blank interrupts */
if (status & RADEON_CRTC_VBLANK_STAT) {
drm_handle_vblank(rdev->ddev, 0);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
}
if (status & RADEON_CRTC2_VBLANK_STAT) {
drm_handle_vblank(rdev->ddev, 1);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
}
if (status & RADEON_FP_DETECT_STAT) {
udelay(10);
rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR);
+ /* protect against crazy HW on resume */
+ rdev->cp.wptr &= rdev->cp.ptr_mask;
/* Set cp mode to bus mastering & enable cp*/
WREG32(RADEON_CP_CSQ_MODE,
REG_SET(RADEON_INDIRECT2_START, indirect2_start) |
{
struct drm_device *dev = rdev->ddev;
bool force_dac2 = false;
+ u32 tmp;
/* set these so they don't interfere with anything */
WREG32(RADEON_OV0_SCALE_CNTL, 0);
WREG32(RADEON_DISP_HW_DEBUG, disp_hw_debug);
WREG32(RADEON_DAC_CNTL2, dac2_cntl);
}
+
+ /* switch PM block to ACPI mode */
+ tmp = RREG32_PLL(RADEON_PLL_PWRMGT_CNTL);
+ tmp &= ~RADEON_PM_MODE_SEL;
+ WREG32_PLL(RADEON_PLL_PWRMGT_CNTL, tmp);
+
}
/*
radeon_vram_location(rdev, &rdev->mc, base);
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
+ radeon_update_bandwidth_info(rdev);
}
uint32_t pixel_bytes1 = 0;
uint32_t pixel_bytes2 = 0;
+ radeon_update_display_priority(rdev);
+
if (rdev->mode_info.crtcs[0]->base.enabled) {
mode1 = &rdev->mode_info.crtcs[0]->base.mode;
pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
/*
* determine is there is enough bw for current mode
*/
- mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
- temp_ff.full = rfixed_const(100);
- mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
- sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
- sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+ sclk_ff = rdev->pm.sclk;
+ mclk_ff = rdev->pm.mclk;
temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
temp_ff.full = rfixed_const(temp);
{
struct radeon_bo *robj;
unsigned long size;
- unsigned u, i, w, h;
+ unsigned u, i, w, h, d;
int ret;
for (u = 0; u < track->num_texture; u++) {
h = h / (1 << i);
if (track->textures[u].roundup_h)
h = roundup_pow_of_two(h);
+ if (track->textures[u].tex_coord_type == 1) {
+ d = (1 << track->textures[u].txdepth) / (1 << i);
+ if (!d)
+ d = 1;
+ } else {
+ d = 1;
+ }
if (track->textures[u].compress_format) {
- size += r100_track_compress_size(track->textures[u].compress_format, w, h);
+ size += r100_track_compress_size(track->textures[u].compress_format, w, h) * d;
/* compressed textures are block based */
} else
- size += w * h;
+ size += w * h * d;
}
size *= track->textures[u].cpp;
switch (track->textures[u].tex_coord_type) {
case 0:
- break;
case 1:
- size *= (1 << track->textures[u].txdepth);
break;
case 2:
if (track->separate_cube) {
for (i = 0; i < track->num_cb; i++) {
if (track->cb[i].robj == NULL) {
- if (!(track->fastfill || track->color_channel_mask ||
+ if (!(track->zb_cb_clear || track->color_channel_mask ||
track->blend_read_enable)) {
continue;
}
}
}
prim_walk = (track->vap_vf_cntl >> 4) & 0x3;
- nverts = (track->vap_vf_cntl >> 16) & 0xFFFF;
+ if (track->vap_vf_cntl & (1 << 14)) {
+ nverts = track->vap_alt_nverts;
+ } else {
+ nverts = (track->vap_vf_cntl >> 16) & 0xFFFF;
+ }
switch (prim_walk) {
case 1:
for (i = 0; i < track->num_arrays; i++) {
void r100_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
unsigned maxy;
unsigned vtx_size;
unsigned vap_vf_cntl;
+ unsigned vap_alt_nverts;
unsigned immd_dwords;
unsigned num_arrays;
unsigned max_indx;
struct r100_cs_track_texture textures[R300_TRACK_MAX_TEXTURE];
bool z_enabled;
bool separate_cube;
- bool fastfill;
+ bool zb_cb_clear;
bool blend_read_enable;
};
#include "radeon_drm.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "r100d.h"
#include "r200_reg_safe.h"
* Jerome Glisse
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "radeon_drm.h"
#include "r100_track.h"
#include "r300d.h"
void rv370_pcie_gart_fini(struct radeon_device *rdev)
{
+ radeon_gart_fini(rdev);
rv370_pcie_gart_disable(rdev);
radeon_gart_table_vram_free(rdev);
- radeon_gart_fini(rdev);
}
void r300_fence_ring_emit(struct radeon_device *rdev,
uint32_t gb_tile_config, tmp;
r100_hdp_reset(rdev);
- /* FIXME: rv380 one pipes ? */
- if ((rdev->family == CHIP_R300) || (rdev->family == CHIP_R350)) {
+ if ((rdev->family == CHIP_R300 && rdev->pdev->device != 0x4144) ||
+ (rdev->family == CHIP_R350 && rdev->pdev->device != 0x4148)) {
/* r300,r350 */
rdev->num_gb_pipes = 2;
} else {
- /* rv350,rv370,rv380 */
+ /* rv350,rv370,rv380,r300 AD, r350 AH */
rdev->num_gb_pipes = 1;
}
rdev->num_z_pipes = 1;
radeon_vram_location(rdev, &rdev->mc, base);
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
+ radeon_update_bandwidth_info(rdev);
}
void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes)
/* VAP_VF_MAX_VTX_INDX */
track->max_indx = idx_value & 0x00FFFFFFUL;
break;
+ case 0x2088:
+ /* VAP_ALT_NUM_VERTICES - only valid on r500 */
+ if (p->rdev->family < CHIP_RV515)
+ goto fail;
+ track->vap_alt_nverts = idx_value & 0xFFFFFF;
+ break;
case 0x43E4:
/* SC_SCISSOR1 */
track->maxy = ((idx_value >> 13) & 0x1FFF) + 1;
tmp = idx_value & ~(0x7 << 16);
tmp |= tile_flags;
ib[idx] = tmp;
-
i = (reg - 0x4E38) >> 2;
track->cb[i].pitch = idx_value & 0x3FFE;
switch (((idx_value >> 21) & 0xF)) {
break;
case 0x4d1c:
/* ZB_BW_CNTL */
- track->fastfill = !!(idx_value & (1 << 2));
+ track->zb_cb_clear = !!(idx_value & (1 << 5));
break;
case 0x4e04:
/* RB3D_BLENDCNTL */
break;
/* fallthrough do not move */
default:
- printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
- reg, idx);
- return -EINVAL;
+ goto fail;
}
return 0;
+fail:
+ printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
+ reg, idx);
+ return -EINVAL;
}
static int r300_packet3_check(struct radeon_cs_parser *p,
void r300_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
ptr_addr = drm_buffer_read_object(cmdbuf->buffer,
sizeof(stack_ptr_addr), &stack_ptr_addr);
- ref_age_base = (u32 *)(unsigned long)*ptr_addr;
+ ref_age_base = (u32 *)(unsigned long)get_unaligned(ptr_addr);
for (i=0; i < header.scratch.n_bufs; i++) {
buf_idx = drm_buffer_pointer_to_dword(cmdbuf->buffer, 0);
* Jerome Glisse
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "radeon_reg.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "atom.h"
#include "r100d.h"
#include "r420d.h"
/* get max number of pipes */
gb_pipe_select = RREG32(0x402C);
num_pipes = ((gb_pipe_select >> 12) & 3) + 1;
+
+ /* SE chips have 1 pipe */
+ if ((rdev->pdev->device == 0x5e4c) ||
+ (rdev->pdev->device == 0x5e4f))
+ num_pipes = 1;
+
rdev->num_gb_pipes = num_pipes;
tmp = 0;
switch (num_pipes) {
void r420_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
*/
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "atom.h"
#include "r520d.h"
void r520_mc_init(struct radeon_device *rdev)
{
- fixed20_12 a;
r520_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
- /* FIXME: we should enforce default clock in case GPU is not in
- * default setup
- */
- a.full = rfixed_const(100);
- rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
- rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ radeon_update_bandwidth_info(rdev);
}
void r520_mc_program(struct radeon_device *rdev)
* Alex Deucher
* Jerome Glisse
*/
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/firmware.h>
#include <linux/platform_device.h>
#include "drmP.h"
#include "radeon_drm.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "radeon_mode.h"
#include "r600d.h"
#include "atom.h"
void r600_pcie_gart_fini(struct radeon_device *rdev)
{
+ radeon_gart_fini(rdev);
r600_pcie_gart_disable(rdev);
radeon_gart_table_vram_free(rdev);
- radeon_gart_fini(rdev);
}
void r600_agp_enable(struct radeon_device *rdev)
int r600_mc_init(struct radeon_device *rdev)
{
- fixed20_12 a;
u32 tmp;
int chansize, numchan;
rdev->mc.real_vram_size = rdev->mc.aper_size;
}
r600_vram_gtt_location(rdev, &rdev->mc);
- /* FIXME: we should enforce default clock in case GPU is not in
- * default setup
- */
- a.full = rfixed_const(100);
- rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
- rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+
if (rdev->flags & RADEON_IS_IGP)
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
+ radeon_update_bandwidth_info(rdev);
return 0;
}
/* Setup pipes */
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_GC_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
+ WREG32(GC_USER_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
tmp = R6XX_MAX_PIPES - r600_count_pipe_bits((cc_gc_shader_pipe_config & INACTIVE_QD_PIPES_MASK) >> 8);
WREG32(VGT_OUT_DEALLOC_CNTL, (tmp * 4) & DEALLOC_DIST_MASK);
void r600_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r600_audio_fini(rdev);
r600_blit_fini(rdev);
r600_cp_fini(rdev);
WREG32(DC_HPD4_INT_CONTROL, tmp);
if (ASIC_IS_DCE32(rdev)) {
tmp = RREG32(DC_HPD5_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD5_INT_CONTROL, 0);
+ WREG32(DC_HPD5_INT_CONTROL, tmp);
tmp = RREG32(DC_HPD6_INT_CONTROL) & DC_HPDx_INT_POLARITY;
- WREG32(DC_HPD6_INT_CONTROL, 0);
+ WREG32(DC_HPD6_INT_CONTROL, tmp);
}
} else {
WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
WREG32(DACB_AUTODETECT_INT_CONTROL, 0);
tmp = RREG32(DC_HOT_PLUG_DETECT1_INT_CONTROL) & DC_HOT_PLUG_DETECTx_INT_POLARITY;
- WREG32(DC_HOT_PLUG_DETECT1_INT_CONTROL, 0);
+ WREG32(DC_HOT_PLUG_DETECT1_INT_CONTROL, tmp);
tmp = RREG32(DC_HOT_PLUG_DETECT2_INT_CONTROL) & DC_HOT_PLUG_DETECTx_INT_POLARITY;
- WREG32(DC_HOT_PLUG_DETECT2_INT_CONTROL, 0);
+ WREG32(DC_HOT_PLUG_DETECT2_INT_CONTROL, tmp);
tmp = RREG32(DC_HOT_PLUG_DETECT3_INT_CONTROL) & DC_HOT_PLUG_DETECTx_INT_POLARITY;
- WREG32(DC_HOT_PLUG_DETECT3_INT_CONTROL, 0);
+ WREG32(DC_HOT_PLUG_DETECT3_INT_CONTROL, tmp);
}
}
case 0: /* D1 vblank */
if (disp_int & LB_D1_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 0);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int &= ~LB_D1_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D1 vblank\n");
case 0: /* D2 vblank */
if (disp_int & LB_D2_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 1);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int &= ~LB_D2_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D2 vblank\n");
break;
case 10:
if (disp_int_cont2 & DC_HPD5_INTERRUPT) {
- disp_int_cont &= ~DC_HPD5_INTERRUPT;
+ disp_int_cont2 &= ~DC_HPD5_INTERRUPT;
queue_hotplug = true;
DRM_DEBUG("IH: HPD5\n");
}
break;
case 12:
if (disp_int_cont2 & DC_HPD6_INTERRUPT) {
- disp_int_cont &= ~DC_HPD6_INTERRUPT;
+ disp_int_cont2 &= ~DC_HPD6_INTERRUPT;
queue_hotplug = true;
DRM_DEBUG("IH: HPD6\n");
}
*/
static int r600_audio_chipset_supported(struct radeon_device *rdev)
{
- return rdev->family >= CHIP_R600
+ return (rdev->family >= CHIP_R600 && rdev->family < CHIP_CEDAR)
|| rdev->family == CHIP_RS600
|| rdev->family == CHIP_RS690
|| rdev->family == CHIP_RS740;
return 0;
}
-/*
- * determin how the encoders and audio interface is wired together
- */
-int r600_audio_tmds_index(struct drm_encoder *encoder)
-{
- struct drm_device *dev = encoder->dev;
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct drm_encoder *other;
-
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- return 0;
-
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- /* special case check if an TMDS1 is present */
- list_for_each_entry(other, &dev->mode_config.encoder_list, head) {
- if (to_radeon_encoder(other)->encoder_id ==
- ENCODER_OBJECT_ID_INTERNAL_TMDS1)
- return 1;
- }
- return 0;
-
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- return 1;
-
- default:
- DRM_ERROR("Unsupported encoder type 0x%02X\n",
- radeon_encoder->encoder_id);
- return -1;
- }
-}
-
/*
* atach the audio codec to the clock source of the encoder
*/
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
int base_rate = 48000;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
WREG32_P(R600_AUDIO_TIMING, 0, ~0x301);
break;
-
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
WREG32_P(R600_AUDIO_TIMING, 0x100, ~0x301);
break;
-
default:
DRM_ERROR("Unsupported encoder type 0x%02X\n",
radeon_encoder->encoder_id);
return;
}
- switch (r600_audio_tmds_index(encoder)) {
+ switch (dig->dig_encoder) {
case 0:
- WREG32(R600_AUDIO_PLL1_MUL, base_rate*50);
- WREG32(R600_AUDIO_PLL1_DIV, clock*100);
+ WREG32(R600_AUDIO_PLL1_MUL, base_rate * 50);
+ WREG32(R600_AUDIO_PLL1_DIV, clock * 100);
WREG32(R600_AUDIO_CLK_SRCSEL, 0);
break;
case 1:
- WREG32(R600_AUDIO_PLL2_MUL, base_rate*50);
- WREG32(R600_AUDIO_PLL2_DIV, clock*100);
+ WREG32(R600_AUDIO_PLL2_MUL, base_rate * 50);
+ WREG32(R600_AUDIO_PLL2_DIV, clock * 100);
WREG32(R600_AUDIO_CLK_SRCSEL, 1);
break;
+ default:
+ dev_err(rdev->dev, "Unsupported DIG on encoder 0x%02X\n",
+ radeon_encoder->encoder_id);
+ return;
}
}
+/*
+ * Copyright 2009 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Alex Deucher <alexander.deucher@amd.com>
+ */
#include <linux/types.h>
#include <linux/kernel.h>
+/*
+ * R6xx+ cards need to use the 3D engine to blit data which requires
+ * quite a bit of hw state setup. Rather than pull the whole 3D driver
+ * (which normally generates the 3D state) into the DRM, we opt to use
+ * statically generated state tables. The regsiter state and shaders
+ * were hand generated to support blitting functionality. See the 3D
+ * driver or documentation for descriptions of the registers and
+ * shader instructions.
+ */
+
const u32 r6xx_default_state[] =
{
0xc0002400,
RADEON_WRITE(R600_CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
RADEON_WRITE(R600_CC_GC_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
+ RADEON_WRITE(R600_GC_USER_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
RADEON_WRITE(R700_CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
RADEON_WRITE(R700_CGTS_SYS_TCC_DISABLE, 0);
RADEON_WRITE(R700_CGTS_TCC_DISABLE, 0);
+ RADEON_WRITE(R700_CGTS_USER_SYS_TCC_DISABLE, 0);
+ RADEON_WRITE(R700_CGTS_USER_TCC_DISABLE, 0);
num_qd_pipes =
R7XX_MAX_PIPES - r600_count_pipe_bits((cc_gc_shader_pipe_config & R600_INACTIVE_QD_PIPES_MASK) >> 8);
u32 nbanks;
u32 npipes;
/* value we track */
+ u32 sq_config;
u32 nsamples;
u32 cb_color_base_last[8];
struct radeon_bo *cb_color_bo[8];
{
int i;
+ /* assume DX9 mode */
+ track->sq_config = DX9_CONSTS;
for (i = 0; i < 8; i++) {
track->cb_color_base_last[i] = 0;
track->cb_color_size[i] = 0;
tmp =radeon_get_ib_value(p, idx);
ib[idx] = 0;
break;
+ case SQ_CONFIG:
+ track->sq_config = radeon_get_ib_value(p, idx);
+ break;
case R_028800_DB_DEPTH_CONTROL:
track->db_depth_control = radeon_get_ib_value(p, idx);
break;
case SQ_PGM_START_VS:
case SQ_PGM_START_GS:
case SQ_PGM_START_PS:
+ case SQ_ALU_CONST_CACHE_GS_0:
+ case SQ_ALU_CONST_CACHE_GS_1:
+ case SQ_ALU_CONST_CACHE_GS_2:
+ case SQ_ALU_CONST_CACHE_GS_3:
+ case SQ_ALU_CONST_CACHE_GS_4:
+ case SQ_ALU_CONST_CACHE_GS_5:
+ case SQ_ALU_CONST_CACHE_GS_6:
+ case SQ_ALU_CONST_CACHE_GS_7:
+ case SQ_ALU_CONST_CACHE_GS_8:
+ case SQ_ALU_CONST_CACHE_GS_9:
+ case SQ_ALU_CONST_CACHE_GS_10:
+ case SQ_ALU_CONST_CACHE_GS_11:
+ case SQ_ALU_CONST_CACHE_GS_12:
+ case SQ_ALU_CONST_CACHE_GS_13:
+ case SQ_ALU_CONST_CACHE_GS_14:
+ case SQ_ALU_CONST_CACHE_GS_15:
+ case SQ_ALU_CONST_CACHE_PS_0:
+ case SQ_ALU_CONST_CACHE_PS_1:
+ case SQ_ALU_CONST_CACHE_PS_2:
+ case SQ_ALU_CONST_CACHE_PS_3:
+ case SQ_ALU_CONST_CACHE_PS_4:
+ case SQ_ALU_CONST_CACHE_PS_5:
+ case SQ_ALU_CONST_CACHE_PS_6:
+ case SQ_ALU_CONST_CACHE_PS_7:
+ case SQ_ALU_CONST_CACHE_PS_8:
+ case SQ_ALU_CONST_CACHE_PS_9:
+ case SQ_ALU_CONST_CACHE_PS_10:
+ case SQ_ALU_CONST_CACHE_PS_11:
+ case SQ_ALU_CONST_CACHE_PS_12:
+ case SQ_ALU_CONST_CACHE_PS_13:
+ case SQ_ALU_CONST_CACHE_PS_14:
+ case SQ_ALU_CONST_CACHE_PS_15:
+ case SQ_ALU_CONST_CACHE_VS_0:
+ case SQ_ALU_CONST_CACHE_VS_1:
+ case SQ_ALU_CONST_CACHE_VS_2:
+ case SQ_ALU_CONST_CACHE_VS_3:
+ case SQ_ALU_CONST_CACHE_VS_4:
+ case SQ_ALU_CONST_CACHE_VS_5:
+ case SQ_ALU_CONST_CACHE_VS_6:
+ case SQ_ALU_CONST_CACHE_VS_7:
+ case SQ_ALU_CONST_CACHE_VS_8:
+ case SQ_ALU_CONST_CACHE_VS_9:
+ case SQ_ALU_CONST_CACHE_VS_10:
+ case SQ_ALU_CONST_CACHE_VS_11:
+ case SQ_ALU_CONST_CACHE_VS_12:
+ case SQ_ALU_CONST_CACHE_VS_13:
+ case SQ_ALU_CONST_CACHE_VS_14:
+ case SQ_ALU_CONST_CACHE_VS_15:
r = r600_cs_packet_next_reloc(p, &reloc);
if (r) {
dev_warn(p->dev, "bad SET_CONTEXT_REG "
}
break;
case PACKET3_SET_ALU_CONST:
- start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET;
- end_reg = 4 * pkt->count + start_reg - 4;
- if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) ||
- (start_reg >= PACKET3_SET_ALU_CONST_END) ||
- (end_reg >= PACKET3_SET_ALU_CONST_END)) {
- DRM_ERROR("bad SET_ALU_CONST\n");
- return -EINVAL;
+ if (track->sq_config & DX9_CONSTS) {
+ start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET;
+ end_reg = 4 * pkt->count + start_reg - 4;
+ if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) ||
+ (start_reg >= PACKET3_SET_ALU_CONST_END) ||
+ (end_reg >= PACKET3_SET_ALU_CONST_END)) {
+ DRM_ERROR("bad SET_ALU_CONST\n");
+ return -EINVAL;
+ }
}
break;
case PACKET3_SET_BOOL_CONST:
*/
enum r600_hdmi_iec_status_bits {
AUDIO_STATUS_DIG_ENABLE = 0x01,
- AUDIO_STATUS_V = 0x02,
- AUDIO_STATUS_VCFG = 0x04,
+ AUDIO_STATUS_V = 0x02,
+ AUDIO_STATUS_VCFG = 0x04,
AUDIO_STATUS_EMPHASIS = 0x08,
AUDIO_STATUS_COPYRIGHT = 0x10,
AUDIO_STATUS_NONAUDIO = 0x20,
AUDIO_STATUS_PROFESSIONAL = 0x40,
- AUDIO_STATUS_LEVEL = 0x80
+ AUDIO_STATUS_LEVEL = 0x80
};
struct {
static void r600_hdmi_calc_CTS(uint32_t clock, int *CTS, int N, int freq)
{
if (*CTS == 0)
- *CTS = clock*N/(128*freq)*1000;
+ *CTS = clock * N / (128 * freq) * 1000;
DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n",
N, *CTS, freq);
}
uint8_t length,
uint8_t *frame)
{
- int i;
- frame[0] = packetType + versionNumber + length;
- for (i = 1; i <= length; i++)
- frame[0] += frame[i];
- frame[0] = 0x100 - frame[0];
+ int i;
+ frame[0] = packetType + versionNumber + length;
+ for (i = 1; i <= length; i++)
+ frame[0] += frame[i];
+ frame[0] = 0x100 - frame[0];
}
/*
struct radeon_device *rdev = dev->dev_private;
uint32_t offset = to_radeon_encoder(encoder)->hdmi_offset;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
if (!offset)
return;
WREG32_P(offset+R600_HDMI_CNTL, 0x04000000, ~0x04000000);
}
-/*
- * enable/disable the HDMI engine
- */
-void r600_hdmi_enable(struct drm_encoder *encoder, int enable)
+static int r600_hdmi_find_free_block(struct drm_device *dev)
+{
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_encoder *encoder;
+ struct radeon_encoder *radeon_encoder;
+ bool free_blocks[3] = { true, true, true };
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ switch (radeon_encoder->hdmi_offset) {
+ case R600_HDMI_BLOCK1:
+ free_blocks[0] = false;
+ break;
+ case R600_HDMI_BLOCK2:
+ free_blocks[1] = false;
+ break;
+ case R600_HDMI_BLOCK3:
+ free_blocks[2] = false;
+ break;
+ }
+ }
+
+ if (rdev->family == CHIP_RS600 || rdev->family == CHIP_RS690) {
+ return free_blocks[0] ? R600_HDMI_BLOCK1 : 0;
+ } else if (rdev->family >= CHIP_R600) {
+ if (free_blocks[0])
+ return R600_HDMI_BLOCK1;
+ else if (free_blocks[1])
+ return R600_HDMI_BLOCK2;
+ }
+ return 0;
+}
+
+static void r600_hdmi_assign_block(struct drm_encoder *encoder)
{
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- uint32_t offset = to_radeon_encoder(encoder)->hdmi_offset;
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- if (!offset)
+ if (!dig) {
+ dev_err(rdev->dev, "Enabling HDMI on non-dig encoder\n");
return;
+ }
- DRM_DEBUG("%s HDMI interface @ 0x%04X\n", enable ? "Enabling" : "Disabling", offset);
-
- /* some version of atombios ignore the enable HDMI flag
- * so enabling/disabling HDMI was moved here for TMDS1+2 */
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- WREG32_P(AVIVO_TMDSA_CNTL, enable ? 0x4 : 0x0, ~0x4);
- WREG32(offset+R600_HDMI_ENABLE, enable ? 0x101 : 0x0);
- break;
-
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- WREG32_P(AVIVO_LVTMA_CNTL, enable ? 0x4 : 0x0, ~0x4);
- WREG32(offset+R600_HDMI_ENABLE, enable ? 0x105 : 0x0);
- break;
-
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- /* This part is doubtfull in my opinion */
- WREG32(offset+R600_HDMI_ENABLE, enable ? 0x110 : 0x0);
- break;
-
- default:
- DRM_ERROR("unknown HDMI output type\n");
- break;
+ if (ASIC_IS_DCE4(rdev)) {
+ /* TODO */
+ } else if (ASIC_IS_DCE3(rdev)) {
+ radeon_encoder->hdmi_offset = dig->dig_encoder ?
+ R600_HDMI_BLOCK3 : R600_HDMI_BLOCK1;
+ if (ASIC_IS_DCE32(rdev))
+ radeon_encoder->hdmi_config_offset = dig->dig_encoder ?
+ R600_HDMI_CONFIG2 : R600_HDMI_CONFIG1;
+ } else if (rdev->family >= CHIP_R600) {
+ radeon_encoder->hdmi_offset = r600_hdmi_find_free_block(dev);
}
}
/*
- * determin at which register offset the HDMI encoder is
+ * enable the HDMI engine
*/
-void r600_hdmi_init(struct drm_encoder *encoder)
+void r600_hdmi_enable(struct drm_encoder *encoder)
{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
- radeon_encoder->hdmi_offset = R600_HDMI_TMDS1;
- break;
-
- case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
- switch (r600_audio_tmds_index(encoder)) {
- case 0:
- radeon_encoder->hdmi_offset = R600_HDMI_TMDS1;
+ if (ASIC_IS_DCE4(rdev))
+ return;
+
+ if (!radeon_encoder->hdmi_offset) {
+ r600_hdmi_assign_block(encoder);
+ if (!radeon_encoder->hdmi_offset) {
+ dev_warn(rdev->dev, "Could not find HDMI block for "
+ "0x%x encoder\n", radeon_encoder->encoder_id);
+ return;
+ }
+ }
+
+ if (ASIC_IS_DCE32(rdev) && !ASIC_IS_DCE4(rdev)) {
+ WREG32_P(radeon_encoder->hdmi_config_offset + 0x4, 0x1, ~0x1);
+ } else if (rdev->family >= CHIP_R600 && !ASIC_IS_DCE3(rdev)) {
+ int offset = radeon_encoder->hdmi_offset;
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ WREG32_P(AVIVO_TMDSA_CNTL, 0x4, ~0x4);
+ WREG32(offset + R600_HDMI_ENABLE, 0x101);
break;
- case 1:
- radeon_encoder->hdmi_offset = R600_HDMI_TMDS2;
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ WREG32_P(AVIVO_LVTMA_CNTL, 0x4, ~0x4);
+ WREG32(offset + R600_HDMI_ENABLE, 0x105);
break;
default:
- radeon_encoder->hdmi_offset = 0;
+ dev_err(rdev->dev, "Unknown HDMI output type\n");
break;
}
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
- radeon_encoder->hdmi_offset = R600_HDMI_TMDS2;
- break;
+ }
+
+ DRM_DEBUG("Enabling HDMI interface @ 0x%04X for encoder 0x%x\n",
+ radeon_encoder->hdmi_offset, radeon_encoder->encoder_id);
+}
+
+/*
+ * disable the HDMI engine
+ */
+void r600_hdmi_disable(struct drm_encoder *encoder)
+{
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
- radeon_encoder->hdmi_offset = R600_HDMI_DIG;
- break;
+ if (ASIC_IS_DCE4(rdev))
+ return;
- default:
- radeon_encoder->hdmi_offset = 0;
- break;
+ if (!radeon_encoder->hdmi_offset) {
+ dev_err(rdev->dev, "Disabling not enabled HDMI\n");
+ return;
}
- DRM_DEBUG("using HDMI engine at offset 0x%04X for encoder 0x%x\n",
- radeon_encoder->hdmi_offset, radeon_encoder->encoder_id);
+ DRM_DEBUG("Disabling HDMI interface @ 0x%04X for encoder 0x%x\n",
+ radeon_encoder->hdmi_offset, radeon_encoder->encoder_id);
+
+ if (ASIC_IS_DCE32(rdev) && !ASIC_IS_DCE4(rdev)) {
+ WREG32_P(radeon_encoder->hdmi_config_offset + 0x4, 0, ~0x1);
+ } else if (rdev->family >= CHIP_R600 && !ASIC_IS_DCE3(rdev)) {
+ int offset = radeon_encoder->hdmi_offset;
+ switch (radeon_encoder->encoder_id) {
+ case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_TMDS1:
+ WREG32_P(AVIVO_TMDSA_CNTL, 0, ~0x4);
+ WREG32(offset + R600_HDMI_ENABLE, 0);
+ break;
+ case ENCODER_OBJECT_ID_INTERNAL_LVTM1:
+ WREG32_P(AVIVO_LVTMA_CNTL, 0, ~0x4);
+ WREG32(offset + R600_HDMI_ENABLE, 0);
+ break;
+ default:
+ dev_err(rdev->dev, "Unknown HDMI output type\n");
+ break;
+ }
+ }
- /* TODO: make this configureable */
- radeon_encoder->hdmi_audio_workaround = 0;
+ radeon_encoder->hdmi_offset = 0;
+ radeon_encoder->hdmi_config_offset = 0;
}
#define R600_AUDIO_STATUS_BITS 0x73d8
/* HDMI base register addresses */
-#define R600_HDMI_TMDS1 0x7400
-#define R600_HDMI_TMDS2 0x7700
-#define R600_HDMI_DIG 0x7800
+#define R600_HDMI_BLOCK1 0x7400
+#define R600_HDMI_BLOCK2 0x7700
+#define R600_HDMI_BLOCK3 0x7800
/* HDMI registers */
#define R600_HDMI_ENABLE 0x00
#define R600_HDMI_AUDIO_DEBUG_2 0xe8
#define R600_HDMI_AUDIO_DEBUG_3 0xec
+/* HDMI additional config base register addresses */
+#define R600_HDMI_CONFIG1 0x7600
+#define R600_HDMI_CONFIG2 0x7a00
+
#endif
#define CB_COLOR0_FRAG 0x280e0
#define CB_COLOR0_MASK 0x28100
+#define SQ_ALU_CONST_CACHE_PS_0 0x28940
+#define SQ_ALU_CONST_CACHE_PS_1 0x28944
+#define SQ_ALU_CONST_CACHE_PS_2 0x28948
+#define SQ_ALU_CONST_CACHE_PS_3 0x2894c
+#define SQ_ALU_CONST_CACHE_PS_4 0x28950
+#define SQ_ALU_CONST_CACHE_PS_5 0x28954
+#define SQ_ALU_CONST_CACHE_PS_6 0x28958
+#define SQ_ALU_CONST_CACHE_PS_7 0x2895c
+#define SQ_ALU_CONST_CACHE_PS_8 0x28960
+#define SQ_ALU_CONST_CACHE_PS_9 0x28964
+#define SQ_ALU_CONST_CACHE_PS_10 0x28968
+#define SQ_ALU_CONST_CACHE_PS_11 0x2896c
+#define SQ_ALU_CONST_CACHE_PS_12 0x28970
+#define SQ_ALU_CONST_CACHE_PS_13 0x28974
+#define SQ_ALU_CONST_CACHE_PS_14 0x28978
+#define SQ_ALU_CONST_CACHE_PS_15 0x2897c
+#define SQ_ALU_CONST_CACHE_VS_0 0x28980
+#define SQ_ALU_CONST_CACHE_VS_1 0x28984
+#define SQ_ALU_CONST_CACHE_VS_2 0x28988
+#define SQ_ALU_CONST_CACHE_VS_3 0x2898c
+#define SQ_ALU_CONST_CACHE_VS_4 0x28990
+#define SQ_ALU_CONST_CACHE_VS_5 0x28994
+#define SQ_ALU_CONST_CACHE_VS_6 0x28998
+#define SQ_ALU_CONST_CACHE_VS_7 0x2899c
+#define SQ_ALU_CONST_CACHE_VS_8 0x289a0
+#define SQ_ALU_CONST_CACHE_VS_9 0x289a4
+#define SQ_ALU_CONST_CACHE_VS_10 0x289a8
+#define SQ_ALU_CONST_CACHE_VS_11 0x289ac
+#define SQ_ALU_CONST_CACHE_VS_12 0x289b0
+#define SQ_ALU_CONST_CACHE_VS_13 0x289b4
+#define SQ_ALU_CONST_CACHE_VS_14 0x289b8
+#define SQ_ALU_CONST_CACHE_VS_15 0x289bc
+#define SQ_ALU_CONST_CACHE_GS_0 0x289c0
+#define SQ_ALU_CONST_CACHE_GS_1 0x289c4
+#define SQ_ALU_CONST_CACHE_GS_2 0x289c8
+#define SQ_ALU_CONST_CACHE_GS_3 0x289cc
+#define SQ_ALU_CONST_CACHE_GS_4 0x289d0
+#define SQ_ALU_CONST_CACHE_GS_5 0x289d4
+#define SQ_ALU_CONST_CACHE_GS_6 0x289d8
+#define SQ_ALU_CONST_CACHE_GS_7 0x289dc
+#define SQ_ALU_CONST_CACHE_GS_8 0x289e0
+#define SQ_ALU_CONST_CACHE_GS_9 0x289e4
+#define SQ_ALU_CONST_CACHE_GS_10 0x289e8
+#define SQ_ALU_CONST_CACHE_GS_11 0x289ec
+#define SQ_ALU_CONST_CACHE_GS_12 0x289f0
+#define SQ_ALU_CONST_CACHE_GS_13 0x289f4
+#define SQ_ALU_CONST_CACHE_GS_14 0x289f8
+#define SQ_ALU_CONST_CACHE_GS_15 0x289fc
+
#define CONFIG_MEMSIZE 0x5428
#define CONFIG_CNTL 0x5424
#define CP_STAT 0x8680
extern int radeon_new_pll;
extern int radeon_dynpm;
extern int radeon_audio;
+extern int radeon_disp_priority;
+extern int radeon_hw_i2c;
/*
* Copy from radeon_drv.h so we don't have to include both and have conflicting
* Power management
*/
int radeon_pm_init(struct radeon_device *rdev);
+void radeon_pm_fini(struct radeon_device *rdev);
void radeon_pm_compute_clocks(struct radeon_device *rdev);
void radeon_combios_get_power_modes(struct radeon_device *rdev);
void radeon_atombios_get_power_modes(struct radeon_device *rdev);
bool downclocked;
int active_crtcs;
int req_vblank;
+ bool vblank_sync;
fixed20_12 max_bandwidth;
fixed20_12 igp_sideport_mclk;
fixed20_12 igp_system_mclk;
fixed20_12 ht_bandwidth;
fixed20_12 core_bandwidth;
fixed20_12 sclk;
+ fixed20_12 mclk;
fixed20_12 needed_bandwidth;
/* XXX: use a define for num power modes */
struct radeon_power_state power_state[8];
struct radeon_power_state *requested_power_state;
struct radeon_pm_clock_info *requested_clock_mode;
struct radeon_power_state *default_power_state;
+ struct radeon_i2c_chan *i2c_bus;
};
struct drm_info_list *files,
unsigned nfiles);
int radeon_debugfs_fence_init(struct radeon_device *rdev);
-int r100_debugfs_rbbm_init(struct radeon_device *rdev);
-int r100_debugfs_cp_init(struct radeon_device *rdev);
/*
int (*set_surface_reg)(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
uint32_t offset, uint32_t obj_size);
- int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
+ void (*clear_surface_reg)(struct radeon_device *rdev, int reg);
void (*bandwidth_update)(struct radeon_device *rdev);
void (*hpd_init)(struct radeon_device *rdev);
void (*hpd_fini)(struct radeon_device *rdev);
struct rv770_asic rv770;
};
+/*
+ * asic initizalization from radeon_asic.c
+ */
+void radeon_agp_disable(struct radeon_device *rdev);
+int radeon_asic_init(struct radeon_device *rdev);
+
/*
* IOCTL.
extern int radeon_modeset_init(struct radeon_device *rdev);
extern void radeon_modeset_fini(struct radeon_device *rdev);
extern bool radeon_card_posted(struct radeon_device *rdev);
+extern void radeon_update_bandwidth_info(struct radeon_device *rdev);
+extern void radeon_update_display_priority(struct radeon_device *rdev);
extern bool radeon_boot_test_post_card(struct radeon_device *rdev);
extern int radeon_clocks_init(struct radeon_device *rdev);
extern void radeon_clocks_fini(struct radeon_device *rdev);
extern int radeon_suspend_kms(struct drm_device *dev, pm_message_t state);
/* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */
-struct r100_mc_save {
- u32 GENMO_WT;
- u32 CRTC_EXT_CNTL;
- u32 CRTC_GEN_CNTL;
- u32 CRTC2_GEN_CNTL;
- u32 CUR_OFFSET;
- u32 CUR2_OFFSET;
-};
-extern void r100_cp_disable(struct radeon_device *rdev);
-extern int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-extern void r100_cp_fini(struct radeon_device *rdev);
-extern void r100_pci_gart_tlb_flush(struct radeon_device *rdev);
-extern int r100_pci_gart_init(struct radeon_device *rdev);
-extern void r100_pci_gart_fini(struct radeon_device *rdev);
-extern int r100_pci_gart_enable(struct radeon_device *rdev);
-extern void r100_pci_gart_disable(struct radeon_device *rdev);
-extern int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
-extern int r100_debugfs_mc_info_init(struct radeon_device *rdev);
-extern int r100_gui_wait_for_idle(struct radeon_device *rdev);
-extern void r100_ib_fini(struct radeon_device *rdev);
-extern int r100_ib_init(struct radeon_device *rdev);
-extern void r100_irq_disable(struct radeon_device *rdev);
-extern int r100_irq_set(struct radeon_device *rdev);
-extern void r100_mc_stop(struct radeon_device *rdev, struct r100_mc_save *save);
-extern void r100_mc_resume(struct radeon_device *rdev, struct r100_mc_save *save);
-extern void r100_vram_init_sizes(struct radeon_device *rdev);
-extern void r100_wb_disable(struct radeon_device *rdev);
-extern void r100_wb_fini(struct radeon_device *rdev);
-extern int r100_wb_init(struct radeon_device *rdev);
-extern void r100_hdp_reset(struct radeon_device *rdev);
-extern int r100_rb2d_reset(struct radeon_device *rdev);
-extern int r100_cp_reset(struct radeon_device *rdev);
-extern void r100_vga_render_disable(struct radeon_device *rdev);
-extern int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- struct radeon_bo *robj);
-extern int r100_cs_parse_packet0(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- const unsigned *auth, unsigned n,
- radeon_packet0_check_t check);
-extern int r100_cs_packet_parse(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- unsigned idx);
-extern void r100_enable_bm(struct radeon_device *rdev);
-extern void r100_set_common_regs(struct radeon_device *rdev);
/* rv200,rv250,rv280 */
extern void r200_set_safe_registers(struct radeon_device *rdev);
extern void r600_audio_set_clock(struct drm_encoder *encoder, int clock);
extern void r600_audio_fini(struct radeon_device *rdev);
extern void r600_hdmi_init(struct drm_encoder *encoder);
-extern void r600_hdmi_enable(struct drm_encoder *encoder, int enable);
+extern void r600_hdmi_enable(struct drm_encoder *encoder);
+extern void r600_hdmi_disable(struct drm_encoder *encoder);
extern void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mode);
extern int r600_hdmi_buffer_status_changed(struct drm_encoder *encoder);
extern void r600_hdmi_update_audio_settings(struct drm_encoder *encoder,
int ret;
/* Acquire AGP. */
- if (!rdev->ddev->agp->acquired) {
- ret = drm_agp_acquire(rdev->ddev);
- if (ret) {
- DRM_ERROR("Unable to acquire AGP: %d\n", ret);
- return ret;
- }
+ ret = drm_agp_acquire(rdev->ddev);
+ if (ret) {
+ DRM_ERROR("Unable to acquire AGP: %d\n", ret);
+ return ret;
}
ret = drm_agp_info(rdev->ddev, &info);
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+
+#include <linux/console.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/radeon_drm.h>
+#include <linux/vgaarb.h>
+#include <linux/vga_switcheroo.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+#include "radeon_asic.h"
+#include "atom.h"
+
+/*
+ * Registers accessors functions.
+ */
+static uint32_t radeon_invalid_rreg(struct radeon_device *rdev, uint32_t reg)
+{
+ DRM_ERROR("Invalid callback to read register 0x%04X\n", reg);
+ BUG_ON(1);
+ return 0;
+}
+
+static void radeon_invalid_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
+{
+ DRM_ERROR("Invalid callback to write register 0x%04X with 0x%08X\n",
+ reg, v);
+ BUG_ON(1);
+}
+
+static void radeon_register_accessor_init(struct radeon_device *rdev)
+{
+ rdev->mc_rreg = &radeon_invalid_rreg;
+ rdev->mc_wreg = &radeon_invalid_wreg;
+ rdev->pll_rreg = &radeon_invalid_rreg;
+ rdev->pll_wreg = &radeon_invalid_wreg;
+ rdev->pciep_rreg = &radeon_invalid_rreg;
+ rdev->pciep_wreg = &radeon_invalid_wreg;
+
+ /* Don't change order as we are overridding accessor. */
+ if (rdev->family < CHIP_RV515) {
+ rdev->pcie_reg_mask = 0xff;
+ } else {
+ rdev->pcie_reg_mask = 0x7ff;
+ }
+ /* FIXME: not sure here */
+ if (rdev->family <= CHIP_R580) {
+ rdev->pll_rreg = &r100_pll_rreg;
+ rdev->pll_wreg = &r100_pll_wreg;
+ }
+ if (rdev->family >= CHIP_R420) {
+ rdev->mc_rreg = &r420_mc_rreg;
+ rdev->mc_wreg = &r420_mc_wreg;
+ }
+ if (rdev->family >= CHIP_RV515) {
+ rdev->mc_rreg = &rv515_mc_rreg;
+ rdev->mc_wreg = &rv515_mc_wreg;
+ }
+ if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
+ rdev->mc_rreg = &rs400_mc_rreg;
+ rdev->mc_wreg = &rs400_mc_wreg;
+ }
+ if (rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
+ rdev->mc_rreg = &rs690_mc_rreg;
+ rdev->mc_wreg = &rs690_mc_wreg;
+ }
+ if (rdev->family == CHIP_RS600) {
+ rdev->mc_rreg = &rs600_mc_rreg;
+ rdev->mc_wreg = &rs600_mc_wreg;
+ }
+ if ((rdev->family >= CHIP_R600) && (rdev->family <= CHIP_RV740)) {
+ rdev->pciep_rreg = &r600_pciep_rreg;
+ rdev->pciep_wreg = &r600_pciep_wreg;
+ }
+}
+
+
+/* helper to disable agp */
+void radeon_agp_disable(struct radeon_device *rdev)
+{
+ rdev->flags &= ~RADEON_IS_AGP;
+ if (rdev->family >= CHIP_R600) {
+ DRM_INFO("Forcing AGP to PCIE mode\n");
+ rdev->flags |= RADEON_IS_PCIE;
+ } else if (rdev->family >= CHIP_RV515 ||
+ rdev->family == CHIP_RV380 ||
+ rdev->family == CHIP_RV410 ||
+ rdev->family == CHIP_R423) {
+ DRM_INFO("Forcing AGP to PCIE mode\n");
+ rdev->flags |= RADEON_IS_PCIE;
+ rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
+ rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
+ } else {
+ DRM_INFO("Forcing AGP to PCI mode\n");
+ rdev->flags |= RADEON_IS_PCI;
+ rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
+ rdev->asic->gart_set_page = &r100_pci_gart_set_page;
+ }
+ rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+}
+
+/*
+ * ASIC
+ */
+static struct radeon_asic r100_asic = {
+ .init = &r100_init,
+ .fini = &r100_fini,
+ .suspend = &r100_suspend,
+ .resume = &r100_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r100_gpu_reset,
+ .gart_tlb_flush = &r100_pci_gart_tlb_flush,
+ .gart_set_page = &r100_pci_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r100_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &r100_irq_set,
+ .irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
+ .fence_ring_emit = &r100_fence_ring_emit,
+ .cs_parse = &r100_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = NULL,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
+ .set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = &radeon_legacy_get_memory_clock,
+ .set_memory_clock = NULL,
+ .get_pcie_lanes = NULL,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
+ .hpd_init = &r100_hpd_init,
+ .hpd_fini = &r100_hpd_fini,
+ .hpd_sense = &r100_hpd_sense,
+ .hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic r200_asic = {
+ .init = &r100_init,
+ .fini = &r100_fini,
+ .suspend = &r100_suspend,
+ .resume = &r100_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r100_gpu_reset,
+ .gart_tlb_flush = &r100_pci_gart_tlb_flush,
+ .gart_set_page = &r100_pci_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r100_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &r100_irq_set,
+ .irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
+ .fence_ring_emit = &r100_fence_ring_emit,
+ .cs_parse = &r100_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
+ .set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = &radeon_legacy_get_memory_clock,
+ .set_memory_clock = NULL,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
+ .hpd_init = &r100_hpd_init,
+ .hpd_fini = &r100_hpd_fini,
+ .hpd_sense = &r100_hpd_sense,
+ .hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic r300_asic = {
+ .init = &r300_init,
+ .fini = &r300_fini,
+ .suspend = &r300_suspend,
+ .resume = &r300_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r300_gpu_reset,
+ .gart_tlb_flush = &r100_pci_gart_tlb_flush,
+ .gart_set_page = &r100_pci_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r300_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &r100_irq_set,
+ .irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
+ .set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = &radeon_legacy_get_memory_clock,
+ .set_memory_clock = NULL,
+ .get_pcie_lanes = &rv370_get_pcie_lanes,
+ .set_pcie_lanes = &rv370_set_pcie_lanes,
+ .set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
+ .hpd_init = &r100_hpd_init,
+ .hpd_fini = &r100_hpd_fini,
+ .hpd_sense = &r100_hpd_sense,
+ .hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic r300_asic_pcie = {
+ .init = &r300_init,
+ .fini = &r300_fini,
+ .suspend = &r300_suspend,
+ .resume = &r300_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r300_gpu_reset,
+ .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+ .gart_set_page = &rv370_pcie_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r300_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &r100_irq_set,
+ .irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
+ .set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = &radeon_legacy_get_memory_clock,
+ .set_memory_clock = NULL,
+ .set_pcie_lanes = &rv370_set_pcie_lanes,
+ .set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
+ .hpd_init = &r100_hpd_init,
+ .hpd_fini = &r100_hpd_fini,
+ .hpd_sense = &r100_hpd_sense,
+ .hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic r420_asic = {
+ .init = &r420_init,
+ .fini = &r420_fini,
+ .suspend = &r420_suspend,
+ .resume = &r420_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r300_gpu_reset,
+ .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+ .gart_set_page = &rv370_pcie_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r300_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &r100_irq_set,
+ .irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = &rv370_get_pcie_lanes,
+ .set_pcie_lanes = &rv370_set_pcie_lanes,
+ .set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
+ .hpd_init = &r100_hpd_init,
+ .hpd_fini = &r100_hpd_fini,
+ .hpd_sense = &r100_hpd_sense,
+ .hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic rs400_asic = {
+ .init = &rs400_init,
+ .fini = &rs400_fini,
+ .suspend = &rs400_suspend,
+ .resume = &rs400_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r300_gpu_reset,
+ .gart_tlb_flush = &rs400_gart_tlb_flush,
+ .gart_set_page = &rs400_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r300_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &r100_irq_set,
+ .irq_process = &r100_irq_process,
+ .get_vblank_counter = &r100_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
+ .set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = &radeon_legacy_get_memory_clock,
+ .set_memory_clock = NULL,
+ .get_pcie_lanes = NULL,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = &radeon_legacy_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &r100_bandwidth_update,
+ .hpd_init = &r100_hpd_init,
+ .hpd_fini = &r100_hpd_fini,
+ .hpd_sense = &r100_hpd_sense,
+ .hpd_set_polarity = &r100_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic rs600_asic = {
+ .init = &rs600_init,
+ .fini = &rs600_fini,
+ .suspend = &rs600_suspend,
+ .resume = &rs600_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r300_gpu_reset,
+ .gart_tlb_flush = &rs600_gart_tlb_flush,
+ .gart_set_page = &rs600_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r300_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = NULL,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rs600_bandwidth_update,
+ .hpd_init = &rs600_hpd_init,
+ .hpd_fini = &rs600_hpd_fini,
+ .hpd_sense = &rs600_hpd_sense,
+ .hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic rs690_asic = {
+ .init = &rs690_init,
+ .fini = &rs690_fini,
+ .suspend = &rs690_suspend,
+ .resume = &rs690_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &r300_gpu_reset,
+ .gart_tlb_flush = &rs400_gart_tlb_flush,
+ .gart_set_page = &rs400_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &r300_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r200_copy_dma,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = NULL,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rs690_bandwidth_update,
+ .hpd_init = &rs600_hpd_init,
+ .hpd_fini = &rs600_hpd_fini,
+ .hpd_sense = &rs600_hpd_sense,
+ .hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic rv515_asic = {
+ .init = &rv515_init,
+ .fini = &rv515_fini,
+ .suspend = &rv515_suspend,
+ .resume = &rv515_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &rv515_gpu_reset,
+ .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+ .gart_set_page = &rv370_pcie_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &rv515_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = &rv370_get_pcie_lanes,
+ .set_pcie_lanes = &rv370_set_pcie_lanes,
+ .set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rv515_bandwidth_update,
+ .hpd_init = &rs600_hpd_init,
+ .hpd_fini = &rs600_hpd_fini,
+ .hpd_sense = &rs600_hpd_sense,
+ .hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic r520_asic = {
+ .init = &r520_init,
+ .fini = &rv515_fini,
+ .suspend = &rv515_suspend,
+ .resume = &r520_resume,
+ .vga_set_state = &r100_vga_set_state,
+ .gpu_reset = &rv515_gpu_reset,
+ .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
+ .gart_set_page = &rv370_pcie_gart_set_page,
+ .cp_commit = &r100_cp_commit,
+ .ring_start = &rv515_ring_start,
+ .ring_test = &r100_ring_test,
+ .ring_ib_execute = &r100_ring_ib_execute,
+ .irq_set = &rs600_irq_set,
+ .irq_process = &rs600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r300_fence_ring_emit,
+ .cs_parse = &r300_cs_parse,
+ .copy_blit = &r100_copy_blit,
+ .copy_dma = &r200_copy_dma,
+ .copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = &rv370_get_pcie_lanes,
+ .set_pcie_lanes = &rv370_set_pcie_lanes,
+ .set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r100_set_surface_reg,
+ .clear_surface_reg = r100_clear_surface_reg,
+ .bandwidth_update = &rv515_bandwidth_update,
+ .hpd_init = &rs600_hpd_init,
+ .hpd_fini = &rs600_hpd_fini,
+ .hpd_sense = &rs600_hpd_sense,
+ .hpd_set_polarity = &rs600_hpd_set_polarity,
+ .ioctl_wait_idle = NULL,
+};
+
+static struct radeon_asic r600_asic = {
+ .init = &r600_init,
+ .fini = &r600_fini,
+ .suspend = &r600_suspend,
+ .resume = &r600_resume,
+ .cp_commit = &r600_cp_commit,
+ .vga_set_state = &r600_vga_set_state,
+ .gpu_reset = &r600_gpu_reset,
+ .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
+ .gart_set_page = &rs600_gart_set_page,
+ .ring_test = &r600_ring_test,
+ .ring_ib_execute = &r600_ring_ib_execute,
+ .irq_set = &r600_irq_set,
+ .irq_process = &r600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r600_fence_ring_emit,
+ .cs_parse = &r600_cs_parse,
+ .copy_blit = &r600_copy_blit,
+ .copy_dma = &r600_copy_blit,
+ .copy = &r600_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = &rv370_get_pcie_lanes,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = NULL,
+ .set_surface_reg = r600_set_surface_reg,
+ .clear_surface_reg = r600_clear_surface_reg,
+ .bandwidth_update = &rv515_bandwidth_update,
+ .hpd_init = &r600_hpd_init,
+ .hpd_fini = &r600_hpd_fini,
+ .hpd_sense = &r600_hpd_sense,
+ .hpd_set_polarity = &r600_hpd_set_polarity,
+ .ioctl_wait_idle = r600_ioctl_wait_idle,
+};
+
+static struct radeon_asic rs780_asic = {
+ .init = &r600_init,
+ .fini = &r600_fini,
+ .suspend = &r600_suspend,
+ .resume = &r600_resume,
+ .cp_commit = &r600_cp_commit,
+ .vga_set_state = &r600_vga_set_state,
+ .gpu_reset = &r600_gpu_reset,
+ .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
+ .gart_set_page = &rs600_gart_set_page,
+ .ring_test = &r600_ring_test,
+ .ring_ib_execute = &r600_ring_ib_execute,
+ .irq_set = &r600_irq_set,
+ .irq_process = &r600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r600_fence_ring_emit,
+ .cs_parse = &r600_cs_parse,
+ .copy_blit = &r600_copy_blit,
+ .copy_dma = &r600_copy_blit,
+ .copy = &r600_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = NULL,
+ .set_memory_clock = NULL,
+ .get_pcie_lanes = NULL,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = NULL,
+ .set_surface_reg = r600_set_surface_reg,
+ .clear_surface_reg = r600_clear_surface_reg,
+ .bandwidth_update = &rs690_bandwidth_update,
+ .hpd_init = &r600_hpd_init,
+ .hpd_fini = &r600_hpd_fini,
+ .hpd_sense = &r600_hpd_sense,
+ .hpd_set_polarity = &r600_hpd_set_polarity,
+ .ioctl_wait_idle = r600_ioctl_wait_idle,
+};
+
+static struct radeon_asic rv770_asic = {
+ .init = &rv770_init,
+ .fini = &rv770_fini,
+ .suspend = &rv770_suspend,
+ .resume = &rv770_resume,
+ .cp_commit = &r600_cp_commit,
+ .gpu_reset = &rv770_gpu_reset,
+ .vga_set_state = &r600_vga_set_state,
+ .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
+ .gart_set_page = &rs600_gart_set_page,
+ .ring_test = &r600_ring_test,
+ .ring_ib_execute = &r600_ring_ib_execute,
+ .irq_set = &r600_irq_set,
+ .irq_process = &r600_irq_process,
+ .get_vblank_counter = &rs600_get_vblank_counter,
+ .fence_ring_emit = &r600_fence_ring_emit,
+ .cs_parse = &r600_cs_parse,
+ .copy_blit = &r600_copy_blit,
+ .copy_dma = &r600_copy_blit,
+ .copy = &r600_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .get_pcie_lanes = &rv370_get_pcie_lanes,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = &radeon_atom_set_clock_gating,
+ .set_surface_reg = r600_set_surface_reg,
+ .clear_surface_reg = r600_clear_surface_reg,
+ .bandwidth_update = &rv515_bandwidth_update,
+ .hpd_init = &r600_hpd_init,
+ .hpd_fini = &r600_hpd_fini,
+ .hpd_sense = &r600_hpd_sense,
+ .hpd_set_polarity = &r600_hpd_set_polarity,
+ .ioctl_wait_idle = r600_ioctl_wait_idle,
+};
+
+static struct radeon_asic evergreen_asic = {
+ .init = &evergreen_init,
+ .fini = &evergreen_fini,
+ .suspend = &evergreen_suspend,
+ .resume = &evergreen_resume,
+ .cp_commit = NULL,
+ .gpu_reset = &evergreen_gpu_reset,
+ .vga_set_state = &r600_vga_set_state,
+ .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
+ .gart_set_page = &rs600_gart_set_page,
+ .ring_test = NULL,
+ .ring_ib_execute = NULL,
+ .irq_set = NULL,
+ .irq_process = NULL,
+ .get_vblank_counter = NULL,
+ .fence_ring_emit = NULL,
+ .cs_parse = NULL,
+ .copy_blit = NULL,
+ .copy_dma = NULL,
+ .copy = NULL,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
+ .set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
+ .set_memory_clock = &radeon_atom_set_memory_clock,
+ .set_pcie_lanes = NULL,
+ .set_clock_gating = NULL,
+ .set_surface_reg = r600_set_surface_reg,
+ .clear_surface_reg = r600_clear_surface_reg,
+ .bandwidth_update = &evergreen_bandwidth_update,
+ .hpd_init = &evergreen_hpd_init,
+ .hpd_fini = &evergreen_hpd_fini,
+ .hpd_sense = &evergreen_hpd_sense,
+ .hpd_set_polarity = &evergreen_hpd_set_polarity,
+};
+
+int radeon_asic_init(struct radeon_device *rdev)
+{
+ radeon_register_accessor_init(rdev);
+ switch (rdev->family) {
+ case CHIP_R100:
+ case CHIP_RV100:
+ case CHIP_RS100:
+ case CHIP_RV200:
+ case CHIP_RS200:
+ rdev->asic = &r100_asic;
+ break;
+ case CHIP_R200:
+ case CHIP_RV250:
+ case CHIP_RS300:
+ case CHIP_RV280:
+ rdev->asic = &r200_asic;
+ break;
+ case CHIP_R300:
+ case CHIP_R350:
+ case CHIP_RV350:
+ case CHIP_RV380:
+ if (rdev->flags & RADEON_IS_PCIE)
+ rdev->asic = &r300_asic_pcie;
+ else
+ rdev->asic = &r300_asic;
+ break;
+ case CHIP_R420:
+ case CHIP_R423:
+ case CHIP_RV410:
+ rdev->asic = &r420_asic;
+ break;
+ case CHIP_RS400:
+ case CHIP_RS480:
+ rdev->asic = &rs400_asic;
+ break;
+ case CHIP_RS600:
+ rdev->asic = &rs600_asic;
+ break;
+ case CHIP_RS690:
+ case CHIP_RS740:
+ rdev->asic = &rs690_asic;
+ break;
+ case CHIP_RV515:
+ rdev->asic = &rv515_asic;
+ break;
+ case CHIP_R520:
+ case CHIP_RV530:
+ case CHIP_RV560:
+ case CHIP_RV570:
+ case CHIP_R580:
+ rdev->asic = &r520_asic;
+ break;
+ case CHIP_R600:
+ case CHIP_RV610:
+ case CHIP_RV630:
+ case CHIP_RV620:
+ case CHIP_RV635:
+ case CHIP_RV670:
+ rdev->asic = &r600_asic;
+ break;
+ case CHIP_RS780:
+ case CHIP_RS880:
+ rdev->asic = &rs780_asic;
+ break;
+ case CHIP_RV770:
+ case CHIP_RV730:
+ case CHIP_RV710:
+ case CHIP_RV740:
+ rdev->asic = &rv770_asic;
+ break;
+ case CHIP_CEDAR:
+ case CHIP_REDWOOD:
+ case CHIP_JUNIPER:
+ case CHIP_CYPRESS:
+ case CHIP_HEMLOCK:
+ rdev->asic = &evergreen_asic;
+ break;
+ default:
+ /* FIXME: not supported yet */
+ return -EINVAL;
+ }
+
+ if (rdev->flags & RADEON_IS_IGP) {
+ rdev->asic->get_memory_clock = NULL;
+ rdev->asic->set_memory_clock = NULL;
+ }
+
+ /* set the number of crtcs */
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ rdev->num_crtc = 1;
+ else {
+ if (ASIC_IS_DCE4(rdev))
+ rdev->num_crtc = 6;
+ else
+ rdev->num_crtc = 2;
+ }
+
+ return 0;
+}
+
+/*
+ * Wrapper around modesetting bits. Move to radeon_clocks.c?
+ */
+int radeon_clocks_init(struct radeon_device *rdev)
+{
+ int r;
+
+ r = radeon_static_clocks_init(rdev->ddev);
+ if (r) {
+ return r;
+ }
+ DRM_INFO("Clocks initialized !\n");
+ return 0;
+}
+
+void radeon_clocks_fini(struct radeon_device *rdev)
+{
+}
/*
* r100,rv100,rs100,rv200,rs200
*/
-extern int r100_init(struct radeon_device *rdev);
-extern void r100_fini(struct radeon_device *rdev);
-extern int r100_suspend(struct radeon_device *rdev);
-extern int r100_resume(struct radeon_device *rdev);
+struct r100_mc_save {
+ u32 GENMO_WT;
+ u32 CRTC_EXT_CNTL;
+ u32 CRTC_GEN_CNTL;
+ u32 CRTC2_GEN_CNTL;
+ u32 CUR_OFFSET;
+ u32 CUR2_OFFSET;
+};
+int r100_init(struct radeon_device *rdev);
+void r100_fini(struct radeon_device *rdev);
+int r100_suspend(struct radeon_device *rdev);
+int r100_resume(struct radeon_device *rdev);
uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg);
void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void r100_vga_set_state(struct radeon_device *rdev, bool state);
int r100_set_surface_reg(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
uint32_t offset, uint32_t obj_size);
-int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r100_clear_surface_reg(struct radeon_device *rdev, int reg);
void r100_bandwidth_update(struct radeon_device *rdev);
void r100_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int r100_ring_test(struct radeon_device *rdev);
bool r100_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
void r100_hpd_set_polarity(struct radeon_device *rdev,
enum radeon_hpd_id hpd);
-
-static struct radeon_asic r100_asic = {
- .init = &r100_init,
- .fini = &r100_fini,
- .suspend = &r100_suspend,
- .resume = &r100_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r100_gpu_reset,
- .gart_tlb_flush = &r100_pci_gart_tlb_flush,
- .gart_set_page = &r100_pci_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r100_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
- .get_vblank_counter = &r100_get_vblank_counter,
- .fence_ring_emit = &r100_fence_ring_emit,
- .cs_parse = &r100_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = NULL,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_legacy_get_engine_clock,
- .set_engine_clock = &radeon_legacy_set_engine_clock,
- .get_memory_clock = &radeon_legacy_get_memory_clock,
- .set_memory_clock = NULL,
- .get_pcie_lanes = NULL,
- .set_pcie_lanes = NULL,
- .set_clock_gating = &radeon_legacy_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r100_bandwidth_update,
- .hpd_init = &r100_hpd_init,
- .hpd_fini = &r100_hpd_fini,
- .hpd_sense = &r100_hpd_sense,
- .hpd_set_polarity = &r100_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
+int r100_debugfs_rbbm_init(struct radeon_device *rdev);
+int r100_debugfs_cp_init(struct radeon_device *rdev);
+void r100_cp_disable(struct radeon_device *rdev);
+int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
+void r100_cp_fini(struct radeon_device *rdev);
+int r100_pci_gart_init(struct radeon_device *rdev);
+void r100_pci_gart_fini(struct radeon_device *rdev);
+int r100_pci_gart_enable(struct radeon_device *rdev);
+void r100_pci_gart_disable(struct radeon_device *rdev);
+int r100_debugfs_mc_info_init(struct radeon_device *rdev);
+int r100_gui_wait_for_idle(struct radeon_device *rdev);
+void r100_ib_fini(struct radeon_device *rdev);
+int r100_ib_init(struct radeon_device *rdev);
+void r100_irq_disable(struct radeon_device *rdev);
+void r100_mc_stop(struct radeon_device *rdev, struct r100_mc_save *save);
+void r100_mc_resume(struct radeon_device *rdev, struct r100_mc_save *save);
+void r100_vram_init_sizes(struct radeon_device *rdev);
+void r100_wb_disable(struct radeon_device *rdev);
+void r100_wb_fini(struct radeon_device *rdev);
+int r100_wb_init(struct radeon_device *rdev);
+void r100_hdp_reset(struct radeon_device *rdev);
+int r100_rb2d_reset(struct radeon_device *rdev);
+int r100_cp_reset(struct radeon_device *rdev);
+void r100_vga_render_disable(struct radeon_device *rdev);
+int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ struct radeon_bo *robj);
+int r100_cs_parse_packet0(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ const unsigned *auth, unsigned n,
+ radeon_packet0_check_t check);
+int r100_cs_packet_parse(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ unsigned idx);
+void r100_enable_bm(struct radeon_device *rdev);
+void r100_set_common_regs(struct radeon_device *rdev);
/*
* r200,rv250,rs300,rv280
uint64_t dst_offset,
unsigned num_pages,
struct radeon_fence *fence);
-static struct radeon_asic r200_asic = {
- .init = &r100_init,
- .fini = &r100_fini,
- .suspend = &r100_suspend,
- .resume = &r100_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r100_gpu_reset,
- .gart_tlb_flush = &r100_pci_gart_tlb_flush,
- .gart_set_page = &r100_pci_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r100_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
- .get_vblank_counter = &r100_get_vblank_counter,
- .fence_ring_emit = &r100_fence_ring_emit,
- .cs_parse = &r100_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_legacy_get_engine_clock,
- .set_engine_clock = &radeon_legacy_set_engine_clock,
- .get_memory_clock = &radeon_legacy_get_memory_clock,
- .set_memory_clock = NULL,
- .set_pcie_lanes = NULL,
- .set_clock_gating = &radeon_legacy_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r100_bandwidth_update,
- .hpd_init = &r100_hpd_init,
- .hpd_fini = &r100_hpd_fini,
- .hpd_sense = &r100_hpd_sense,
- .hpd_set_polarity = &r100_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
/*
* r300,r350,rv350,rv380
extern void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes);
extern int rv370_get_pcie_lanes(struct radeon_device *rdev);
-static struct radeon_asic r300_asic = {
- .init = &r300_init,
- .fini = &r300_fini,
- .suspend = &r300_suspend,
- .resume = &r300_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r300_gpu_reset,
- .gart_tlb_flush = &r100_pci_gart_tlb_flush,
- .gart_set_page = &r100_pci_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r300_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
- .get_vblank_counter = &r100_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_legacy_get_engine_clock,
- .set_engine_clock = &radeon_legacy_set_engine_clock,
- .get_memory_clock = &radeon_legacy_get_memory_clock,
- .set_memory_clock = NULL,
- .get_pcie_lanes = &rv370_get_pcie_lanes,
- .set_pcie_lanes = &rv370_set_pcie_lanes,
- .set_clock_gating = &radeon_legacy_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r100_bandwidth_update,
- .hpd_init = &r100_hpd_init,
- .hpd_fini = &r100_hpd_fini,
- .hpd_sense = &r100_hpd_sense,
- .hpd_set_polarity = &r100_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
-
-static struct radeon_asic r300_asic_pcie = {
- .init = &r300_init,
- .fini = &r300_fini,
- .suspend = &r300_suspend,
- .resume = &r300_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r300_gpu_reset,
- .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
- .gart_set_page = &rv370_pcie_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r300_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
- .get_vblank_counter = &r100_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_legacy_get_engine_clock,
- .set_engine_clock = &radeon_legacy_set_engine_clock,
- .get_memory_clock = &radeon_legacy_get_memory_clock,
- .set_memory_clock = NULL,
- .set_pcie_lanes = &rv370_set_pcie_lanes,
- .set_clock_gating = &radeon_legacy_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r100_bandwidth_update,
- .hpd_init = &r100_hpd_init,
- .hpd_fini = &r100_hpd_fini,
- .hpd_sense = &r100_hpd_sense,
- .hpd_set_polarity = &r100_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
/*
* r420,r423,rv410
*/
extern void r420_fini(struct radeon_device *rdev);
extern int r420_suspend(struct radeon_device *rdev);
extern int r420_resume(struct radeon_device *rdev);
-static struct radeon_asic r420_asic = {
- .init = &r420_init,
- .fini = &r420_fini,
- .suspend = &r420_suspend,
- .resume = &r420_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r300_gpu_reset,
- .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
- .gart_set_page = &rv370_pcie_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r300_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
- .get_vblank_counter = &r100_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = &rv370_get_pcie_lanes,
- .set_pcie_lanes = &rv370_set_pcie_lanes,
- .set_clock_gating = &radeon_atom_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r100_bandwidth_update,
- .hpd_init = &r100_hpd_init,
- .hpd_fini = &r100_hpd_fini,
- .hpd_sense = &r100_hpd_sense,
- .hpd_set_polarity = &r100_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
/*
* rs400,rs480
int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
-static struct radeon_asic rs400_asic = {
- .init = &rs400_init,
- .fini = &rs400_fini,
- .suspend = &rs400_suspend,
- .resume = &rs400_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r300_gpu_reset,
- .gart_tlb_flush = &rs400_gart_tlb_flush,
- .gart_set_page = &rs400_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r300_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &r100_irq_set,
- .irq_process = &r100_irq_process,
- .get_vblank_counter = &r100_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_legacy_get_engine_clock,
- .set_engine_clock = &radeon_legacy_set_engine_clock,
- .get_memory_clock = &radeon_legacy_get_memory_clock,
- .set_memory_clock = NULL,
- .get_pcie_lanes = NULL,
- .set_pcie_lanes = NULL,
- .set_clock_gating = &radeon_legacy_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r100_bandwidth_update,
- .hpd_init = &r100_hpd_init,
- .hpd_fini = &r100_hpd_fini,
- .hpd_sense = &r100_hpd_sense,
- .hpd_set_polarity = &r100_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
/*
* rs600.
void rs600_hpd_set_polarity(struct radeon_device *rdev,
enum radeon_hpd_id hpd);
-static struct radeon_asic rs600_asic = {
- .init = &rs600_init,
- .fini = &rs600_fini,
- .suspend = &rs600_suspend,
- .resume = &rs600_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r300_gpu_reset,
- .gart_tlb_flush = &rs600_gart_tlb_flush,
- .gart_set_page = &rs600_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r300_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &rs600_irq_set,
- .irq_process = &rs600_irq_process,
- .get_vblank_counter = &rs600_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = NULL,
- .set_pcie_lanes = NULL,
- .set_clock_gating = &radeon_atom_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &rs600_bandwidth_update,
- .hpd_init = &rs600_hpd_init,
- .hpd_fini = &rs600_hpd_fini,
- .hpd_sense = &rs600_hpd_sense,
- .hpd_set_polarity = &rs600_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
-
/*
* rs690,rs740
*/
uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rs690_bandwidth_update(struct radeon_device *rdev);
-static struct radeon_asic rs690_asic = {
- .init = &rs690_init,
- .fini = &rs690_fini,
- .suspend = &rs690_suspend,
- .resume = &rs690_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &r300_gpu_reset,
- .gart_tlb_flush = &rs400_gart_tlb_flush,
- .gart_set_page = &rs400_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &r300_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &rs600_irq_set,
- .irq_process = &rs600_irq_process,
- .get_vblank_counter = &rs600_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r200_copy_dma,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = NULL,
- .set_pcie_lanes = NULL,
- .set_clock_gating = &radeon_atom_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &rs690_bandwidth_update,
- .hpd_init = &rs600_hpd_init,
- .hpd_fini = &rs600_hpd_fini,
- .hpd_sense = &rs600_hpd_sense,
- .hpd_set_polarity = &rs600_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
/*
* rv515
void rv515_bandwidth_update(struct radeon_device *rdev);
int rv515_resume(struct radeon_device *rdev);
int rv515_suspend(struct radeon_device *rdev);
-static struct radeon_asic rv515_asic = {
- .init = &rv515_init,
- .fini = &rv515_fini,
- .suspend = &rv515_suspend,
- .resume = &rv515_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &rv515_gpu_reset,
- .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
- .gart_set_page = &rv370_pcie_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &rv515_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &rs600_irq_set,
- .irq_process = &rs600_irq_process,
- .get_vblank_counter = &rs600_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = &rv370_get_pcie_lanes,
- .set_pcie_lanes = &rv370_set_pcie_lanes,
- .set_clock_gating = &radeon_atom_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &rv515_bandwidth_update,
- .hpd_init = &rs600_hpd_init,
- .hpd_fini = &rs600_hpd_fini,
- .hpd_sense = &rs600_hpd_sense,
- .hpd_set_polarity = &rs600_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
-
/*
* r520,rv530,rv560,rv570,r580
*/
int r520_init(struct radeon_device *rdev);
int r520_resume(struct radeon_device *rdev);
-static struct radeon_asic r520_asic = {
- .init = &r520_init,
- .fini = &rv515_fini,
- .suspend = &rv515_suspend,
- .resume = &r520_resume,
- .vga_set_state = &r100_vga_set_state,
- .gpu_reset = &rv515_gpu_reset,
- .gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
- .gart_set_page = &rv370_pcie_gart_set_page,
- .cp_commit = &r100_cp_commit,
- .ring_start = &rv515_ring_start,
- .ring_test = &r100_ring_test,
- .ring_ib_execute = &r100_ring_ib_execute,
- .irq_set = &rs600_irq_set,
- .irq_process = &rs600_irq_process,
- .get_vblank_counter = &rs600_get_vblank_counter,
- .fence_ring_emit = &r300_fence_ring_emit,
- .cs_parse = &r300_cs_parse,
- .copy_blit = &r100_copy_blit,
- .copy_dma = &r200_copy_dma,
- .copy = &r100_copy_blit,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = &rv370_get_pcie_lanes,
- .set_pcie_lanes = &rv370_set_pcie_lanes,
- .set_clock_gating = &radeon_atom_set_clock_gating,
- .set_surface_reg = r100_set_surface_reg,
- .clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &rv515_bandwidth_update,
- .hpd_init = &rs600_hpd_init,
- .hpd_fini = &rs600_hpd_fini,
- .hpd_sense = &rs600_hpd_sense,
- .hpd_set_polarity = &rs600_hpd_set_polarity,
- .ioctl_wait_idle = NULL,
-};
/*
* r600,rv610,rv630,rv620,rv635,rv670,rs780,rs880
int r600_set_surface_reg(struct radeon_device *rdev, int reg,
uint32_t tiling_flags, uint32_t pitch,
uint32_t offset, uint32_t obj_size);
-int r600_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r600_clear_surface_reg(struct radeon_device *rdev, int reg);
void r600_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
int r600_ring_test(struct radeon_device *rdev);
int r600_copy_blit(struct radeon_device *rdev,
enum radeon_hpd_id hpd);
extern void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo);
-static struct radeon_asic r600_asic = {
- .init = &r600_init,
- .fini = &r600_fini,
- .suspend = &r600_suspend,
- .resume = &r600_resume,
- .cp_commit = &r600_cp_commit,
- .vga_set_state = &r600_vga_set_state,
- .gpu_reset = &r600_gpu_reset,
- .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
- .gart_set_page = &rs600_gart_set_page,
- .ring_test = &r600_ring_test,
- .ring_ib_execute = &r600_ring_ib_execute,
- .irq_set = &r600_irq_set,
- .irq_process = &r600_irq_process,
- .get_vblank_counter = &rs600_get_vblank_counter,
- .fence_ring_emit = &r600_fence_ring_emit,
- .cs_parse = &r600_cs_parse,
- .copy_blit = &r600_copy_blit,
- .copy_dma = &r600_copy_blit,
- .copy = &r600_copy_blit,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = &rv370_get_pcie_lanes,
- .set_pcie_lanes = NULL,
- .set_clock_gating = NULL,
- .set_surface_reg = r600_set_surface_reg,
- .clear_surface_reg = r600_clear_surface_reg,
- .bandwidth_update = &rv515_bandwidth_update,
- .hpd_init = &r600_hpd_init,
- .hpd_fini = &r600_hpd_fini,
- .hpd_sense = &r600_hpd_sense,
- .hpd_set_polarity = &r600_hpd_set_polarity,
- .ioctl_wait_idle = r600_ioctl_wait_idle,
-};
-
/*
* rv770,rv730,rv710,rv740
*/
int rv770_resume(struct radeon_device *rdev);
int rv770_gpu_reset(struct radeon_device *rdev);
-static struct radeon_asic rv770_asic = {
- .init = &rv770_init,
- .fini = &rv770_fini,
- .suspend = &rv770_suspend,
- .resume = &rv770_resume,
- .cp_commit = &r600_cp_commit,
- .gpu_reset = &rv770_gpu_reset,
- .vga_set_state = &r600_vga_set_state,
- .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
- .gart_set_page = &rs600_gart_set_page,
- .ring_test = &r600_ring_test,
- .ring_ib_execute = &r600_ring_ib_execute,
- .irq_set = &r600_irq_set,
- .irq_process = &r600_irq_process,
- .get_vblank_counter = &rs600_get_vblank_counter,
- .fence_ring_emit = &r600_fence_ring_emit,
- .cs_parse = &r600_cs_parse,
- .copy_blit = &r600_copy_blit,
- .copy_dma = &r600_copy_blit,
- .copy = &r600_copy_blit,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .get_pcie_lanes = &rv370_get_pcie_lanes,
- .set_pcie_lanes = NULL,
- .set_clock_gating = &radeon_atom_set_clock_gating,
- .set_surface_reg = r600_set_surface_reg,
- .clear_surface_reg = r600_clear_surface_reg,
- .bandwidth_update = &rv515_bandwidth_update,
- .hpd_init = &r600_hpd_init,
- .hpd_fini = &r600_hpd_fini,
- .hpd_sense = &r600_hpd_sense,
- .hpd_set_polarity = &r600_hpd_set_polarity,
- .ioctl_wait_idle = r600_ioctl_wait_idle,
-};
-
/*
* evergreen
*/
bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
void evergreen_hpd_set_polarity(struct radeon_device *rdev,
enum radeon_hpd_id hpd);
-
-static struct radeon_asic evergreen_asic = {
- .init = &evergreen_init,
- .fini = &evergreen_fini,
- .suspend = &evergreen_suspend,
- .resume = &evergreen_resume,
- .cp_commit = NULL,
- .gpu_reset = &evergreen_gpu_reset,
- .vga_set_state = &r600_vga_set_state,
- .gart_tlb_flush = &r600_pcie_gart_tlb_flush,
- .gart_set_page = &rs600_gart_set_page,
- .ring_test = NULL,
- .ring_ib_execute = NULL,
- .irq_set = NULL,
- .irq_process = NULL,
- .get_vblank_counter = NULL,
- .fence_ring_emit = NULL,
- .cs_parse = NULL,
- .copy_blit = NULL,
- .copy_dma = NULL,
- .copy = NULL,
- .get_engine_clock = &radeon_atom_get_engine_clock,
- .set_engine_clock = &radeon_atom_set_engine_clock,
- .get_memory_clock = &radeon_atom_get_memory_clock,
- .set_memory_clock = &radeon_atom_set_memory_clock,
- .set_pcie_lanes = NULL,
- .set_clock_gating = NULL,
- .set_surface_reg = r600_set_surface_reg,
- .clear_surface_reg = r600_clear_surface_reg,
- .bandwidth_update = &evergreen_bandwidth_update,
- .hpd_init = &evergreen_hpd_init,
- .hpd_fini = &evergreen_hpd_fini,
- .hpd_sense = &evergreen_hpd_sense,
- .hpd_set_polarity = &evergreen_hpd_set_polarity,
-};
-
#endif
struct radeon_i2c_bus_rec i2c;
int index = GetIndexIntoMasterTable(DATA, GPIO_I2C_Info);
struct _ATOM_GPIO_I2C_INFO *i2c_info;
- uint16_t data_offset;
- int i;
+ uint16_t data_offset, size;
+ int i, num_indices;
memset(&i2c, 0, sizeof(struct radeon_i2c_bus_rec));
i2c.valid = false;
- atom_parse_data_header(ctx, index, NULL, NULL, NULL, &data_offset);
-
- i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset);
-
-
- for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) {
- gpio = &i2c_info->asGPIO_Info[i];
-
- if (gpio->sucI2cId.ucAccess == id) {
- i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
- i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
- i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
- i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
- i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
- i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
- i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
- i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
- i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
- i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
- i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
- i2c.en_data_mask = (1 << gpio->ucDataEnShift);
- i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
- i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
- i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
- i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
-
- if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
- i2c.hw_capable = true;
- else
- i2c.hw_capable = false;
-
- if (gpio->sucI2cId.ucAccess == 0xa0)
- i2c.mm_i2c = true;
- else
- i2c.mm_i2c = false;
-
- i2c.i2c_id = gpio->sucI2cId.ucAccess;
-
- i2c.valid = true;
- break;
+ if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) {
+ i2c_info = (struct _ATOM_GPIO_I2C_INFO *)(ctx->bios + data_offset);
+
+ num_indices = (size - sizeof(ATOM_COMMON_TABLE_HEADER)) /
+ sizeof(ATOM_GPIO_I2C_ASSIGMENT);
+
+ for (i = 0; i < num_indices; i++) {
+ gpio = &i2c_info->asGPIO_Info[i];
+
+ if (gpio->sucI2cId.ucAccess == id) {
+ i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
+ i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
+ i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
+ i2c.en_data_reg = le16_to_cpu(gpio->usDataEnRegisterIndex) * 4;
+ i2c.y_clk_reg = le16_to_cpu(gpio->usClkY_RegisterIndex) * 4;
+ i2c.y_data_reg = le16_to_cpu(gpio->usDataY_RegisterIndex) * 4;
+ i2c.a_clk_reg = le16_to_cpu(gpio->usClkA_RegisterIndex) * 4;
+ i2c.a_data_reg = le16_to_cpu(gpio->usDataA_RegisterIndex) * 4;
+ i2c.mask_clk_mask = (1 << gpio->ucClkMaskShift);
+ i2c.mask_data_mask = (1 << gpio->ucDataMaskShift);
+ i2c.en_clk_mask = (1 << gpio->ucClkEnShift);
+ i2c.en_data_mask = (1 << gpio->ucDataEnShift);
+ i2c.y_clk_mask = (1 << gpio->ucClkY_Shift);
+ i2c.y_data_mask = (1 << gpio->ucDataY_Shift);
+ i2c.a_clk_mask = (1 << gpio->ucClkA_Shift);
+ i2c.a_data_mask = (1 << gpio->ucDataA_Shift);
+
+ if (gpio->sucI2cId.sbfAccess.bfHW_Capable)
+ i2c.hw_capable = true;
+ else
+ i2c.hw_capable = false;
+
+ if (gpio->sucI2cId.ucAccess == 0xa0)
+ i2c.mm_i2c = true;
+ else
+ i2c.mm_i2c = false;
+
+ i2c.i2c_id = gpio->sucI2cId.ucAccess;
+
+ i2c.valid = true;
+ break;
+ }
}
}
memset(&gpio, 0, sizeof(struct radeon_gpio_rec));
gpio.valid = false;
- atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset);
+ if (atom_parse_data_header(ctx, index, &size, NULL, NULL, &data_offset)) {
+ gpio_info = (struct _ATOM_GPIO_PIN_LUT *)(ctx->bios + data_offset);
- gpio_info = (struct _ATOM_GPIO_PIN_LUT *)(ctx->bios + data_offset);
+ num_indices = (size - sizeof(ATOM_COMMON_TABLE_HEADER)) /
+ sizeof(ATOM_GPIO_PIN_ASSIGNMENT);
- num_indices = (size - sizeof(ATOM_COMMON_TABLE_HEADER)) / sizeof(ATOM_GPIO_PIN_ASSIGNMENT);
-
- for (i = 0; i < num_indices; i++) {
- pin = &gpio_info->asGPIO_Pin[i];
- if (id == pin->ucGPIO_ID) {
- gpio.id = pin->ucGPIO_ID;
- gpio.reg = pin->usGpioPin_AIndex * 4;
- gpio.mask = (1 << pin->ucGpioPinBitShift);
- gpio.valid = true;
- break;
+ for (i = 0; i < num_indices; i++) {
+ pin = &gpio_info->asGPIO_Pin[i];
+ if (id == pin->ucGPIO_ID) {
+ gpio.id = pin->ucGPIO_ID;
+ gpio.reg = pin->usGpioPin_AIndex * 4;
+ gpio.mask = (1 << pin->ucGpioPinBitShift);
+ gpio.valid = true;
+ break;
+ }
}
}
if ((supported_device == ATOM_DEVICE_CRT1_SUPPORT) ||
(supported_device == ATOM_DEVICE_DFP2_SUPPORT))
return false;
+ if (supported_device == ATOM_DEVICE_CRT2_SUPPORT)
+ *line_mux = 0x90;
}
/* ASUS HD 3600 XT board lists the DVI port as HDMI */
struct radeon_gpio_rec gpio;
struct radeon_hpd hpd;
- atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset);
-
- if (data_offset == 0)
+ if (!atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset))
return false;
if (crev < 2)
GetIndexIntoMasterTable(DATA,
IntegratedSystemInfo);
- atom_parse_data_header(ctx, index, &size, &frev,
- &crev, &igp_offset);
-
- if (crev >= 2) {
- igp_obj =
- (ATOM_INTEGRATED_SYSTEM_INFO_V2
- *) (ctx->bios + igp_offset);
-
- if (igp_obj) {
- uint32_t slot_config, ct;
-
- if (con_obj_num == 1)
- slot_config =
- igp_obj->
- ulDDISlot1Config;
- else
- slot_config =
- igp_obj->
- ulDDISlot2Config;
-
- ct = (slot_config >> 16) & 0xff;
- connector_type =
- object_connector_convert
- [ct];
- connector_object_id = ct;
- igp_lane_info =
- slot_config & 0xffff;
+ if (atom_parse_data_header(ctx, index, &size, &frev,
+ &crev, &igp_offset)) {
+
+ if (crev >= 2) {
+ igp_obj =
+ (ATOM_INTEGRATED_SYSTEM_INFO_V2
+ *) (ctx->bios + igp_offset);
+
+ if (igp_obj) {
+ uint32_t slot_config, ct;
+
+ if (con_obj_num == 1)
+ slot_config =
+ igp_obj->
+ ulDDISlot1Config;
+ else
+ slot_config =
+ igp_obj->
+ ulDDISlot2Config;
+
+ ct = (slot_config >> 16) & 0xff;
+ connector_type =
+ object_connector_convert
+ [ct];
+ connector_object_id = ct;
+ igp_lane_info =
+ slot_config & 0xffff;
+ } else
+ continue;
} else
continue;
- } else
- continue;
+ } else {
+ igp_lane_info = 0;
+ connector_type =
+ object_connector_convert[con_obj_id];
+ connector_object_id = con_obj_id;
+ }
} else {
igp_lane_info = 0;
connector_type =
uint8_t frev, crev;
ATOM_XTMDS_INFO *xtmds;
- atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset);
- xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset);
+ if (atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset)) {
+ xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset);
- if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) {
- if (connector_type == DRM_MODE_CONNECTOR_DVII)
- return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I;
- else
- return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D;
- } else {
- if (connector_type == DRM_MODE_CONNECTOR_DVII)
- return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
- else
- return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D;
- }
+ if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) {
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I;
+ else
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D;
+ } else {
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
+ else
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D;
+ }
+ } else
+ return supported_devices_connector_object_id_convert
+ [connector_type];
} else {
return supported_devices_connector_object_id_convert
[connector_type];
int i, j, max_device;
struct bios_connector bios_connectors[ATOM_MAX_SUPPORTED_DEVICE];
- atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset);
+ if (!atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset))
+ return false;
supported_devices =
(union atom_supported_devices *)(ctx->bios + data_offset);
struct radeon_pll *mpll = &rdev->clock.mpll;
uint16_t data_offset;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
- &crev, &data_offset);
-
- firmware_info =
- (union firmware_info *)(mode_info->atom_context->bios +
- data_offset);
-
- if (firmware_info) {
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ firmware_info =
+ (union firmware_info *)(mode_info->atom_context->bios +
+ data_offset);
/* pixel clocks */
p1pll->reference_freq =
le16_to_cpu(firmware_info->info.usReferenceClock);
p1pll->pll_out_max =
le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output);
+ if (crev >= 4) {
+ p1pll->lcd_pll_out_min =
+ le16_to_cpu(firmware_info->info_14.usLcdMinPixelClockPLL_Output) * 100;
+ if (p1pll->lcd_pll_out_min == 0)
+ p1pll->lcd_pll_out_min = p1pll->pll_out_min;
+ p1pll->lcd_pll_out_max =
+ le16_to_cpu(firmware_info->info_14.usLcdMaxPixelClockPLL_Output) * 100;
+ if (p1pll->lcd_pll_out_max == 0)
+ p1pll->lcd_pll_out_max = p1pll->pll_out_max;
+ } else {
+ p1pll->lcd_pll_out_min = p1pll->pll_out_min;
+ p1pll->lcd_pll_out_max = p1pll->pll_out_max;
+ }
+
if (p1pll->pll_out_min == 0) {
if (ASIC_IS_AVIVO(rdev))
p1pll->pll_out_min = 64800;
u8 frev, crev;
u16 data_offset;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
- &crev, &data_offset);
-
- igp_info = (union igp_info *)(mode_info->atom_context->bios +
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ igp_info = (union igp_info *)(mode_info->atom_context->bios +
data_offset);
-
- if (igp_info) {
switch (crev) {
case 1:
if (igp_info->info.ucMemoryType & 0xf0)
uint16_t maxfreq;
int i;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
- &crev, &data_offset);
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ tmds_info =
+ (struct _ATOM_TMDS_INFO *)(mode_info->atom_context->bios +
+ data_offset);
- tmds_info =
- (struct _ATOM_TMDS_INFO *)(mode_info->atom_context->bios +
- data_offset);
-
- if (tmds_info) {
maxfreq = le16_to_cpu(tmds_info->usMaxFrequency);
for (i = 0; i < 4; i++) {
tmds->tmds_pll[i].freq =
if (id > ATOM_MAX_SS_ENTRY)
return NULL;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
- &crev, &data_offset);
-
- ss_info =
- (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset);
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ ss_info =
+ (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset);
- if (ss_info) {
ss =
kzalloc(sizeof(struct radeon_atom_ss), GFP_KERNEL);
return ss;
}
-static void radeon_atom_apply_lvds_quirks(struct drm_device *dev,
- struct radeon_encoder_atom_dig *lvds)
-{
-
- /* Toshiba A300-1BU laptop panel doesn't like new pll divider algo */
- if ((dev->pdev->device == 0x95c4) &&
- (dev->pdev->subsystem_vendor == 0x1179) &&
- (dev->pdev->subsystem_device == 0xff50)) {
- if ((lvds->native_mode.hdisplay == 1280) &&
- (lvds->native_mode.vdisplay == 800))
- lvds->pll_algo = PLL_ALGO_LEGACY;
- }
-
- /* Dell Studio 15 laptop panel doesn't like new pll divider algo */
- if ((dev->pdev->device == 0x95c4) &&
- (dev->pdev->subsystem_vendor == 0x1028) &&
- (dev->pdev->subsystem_device == 0x029f)) {
- if ((lvds->native_mode.hdisplay == 1280) &&
- (lvds->native_mode.vdisplay == 800))
- lvds->pll_algo = PLL_ALGO_LEGACY;
- }
-
-}
-
union lvds_info {
struct _ATOM_LVDS_INFO info;
struct _ATOM_LVDS_INFO_V12 info_12;
uint8_t frev, crev;
struct radeon_encoder_atom_dig *lvds = NULL;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
- &crev, &data_offset);
-
- lvds_info =
- (union lvds_info *)(mode_info->atom_context->bios + data_offset);
-
- if (lvds_info) {
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ lvds_info =
+ (union lvds_info *)(mode_info->atom_context->bios + data_offset);
lvds =
kzalloc(sizeof(struct radeon_encoder_atom_dig), GFP_KERNEL);
lvds->pll_algo = PLL_ALGO_LEGACY;
}
- /* LVDS quirks */
- radeon_atom_apply_lvds_quirks(dev, lvds);
-
encoder->native_mode = lvds->native_mode;
}
return lvds;
uint8_t bg, dac;
struct radeon_encoder_primary_dac *p_dac = NULL;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
-
- dac_info = (struct _COMPASSIONATE_DATA *)(mode_info->atom_context->bios + data_offset);
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ dac_info = (struct _COMPASSIONATE_DATA *)
+ (mode_info->atom_context->bios + data_offset);
- if (dac_info) {
p_dac = kzalloc(sizeof(struct radeon_encoder_primary_dac), GFP_KERNEL);
if (!p_dac)
u8 frev, crev;
u16 data_offset, misc;
- atom_parse_data_header(mode_info->atom_context, data_index, NULL, &frev, &crev, &data_offset);
+ if (!atom_parse_data_header(mode_info->atom_context, data_index, NULL,
+ &frev, &crev, &data_offset))
+ return false;
switch (crev) {
case 1:
tv_info = (ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset);
- if (index > MAX_SUPPORTED_TV_TIMING)
+ if (index >= MAX_SUPPORTED_TV_TIMING)
return false;
mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total);
break;
case 2:
tv_info_v1_2 = (ATOM_ANALOG_TV_INFO_V1_2 *)(mode_info->atom_context->bios + data_offset);
- if (index > MAX_SUPPORTED_TV_TIMING_V1_2)
+ if (index >= MAX_SUPPORTED_TV_TIMING_V1_2)
return false;
dtd_timings = &tv_info_v1_2->aModeTimings[index];
struct _ATOM_ANALOG_TV_INFO *tv_info;
enum radeon_tv_std tv_std = TV_STD_NTSC;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
- tv_info = (struct _ATOM_ANALOG_TV_INFO *)(mode_info->atom_context->bios + data_offset);
+ tv_info = (struct _ATOM_ANALOG_TV_INFO *)
+ (mode_info->atom_context->bios + data_offset);
- switch (tv_info->ucTV_BootUpDefaultStandard) {
- case ATOM_TV_NTSC:
- tv_std = TV_STD_NTSC;
- DRM_INFO("Default TV standard: NTSC\n");
- break;
- case ATOM_TV_NTSCJ:
- tv_std = TV_STD_NTSC_J;
- DRM_INFO("Default TV standard: NTSC-J\n");
- break;
- case ATOM_TV_PAL:
- tv_std = TV_STD_PAL;
- DRM_INFO("Default TV standard: PAL\n");
- break;
- case ATOM_TV_PALM:
- tv_std = TV_STD_PAL_M;
- DRM_INFO("Default TV standard: PAL-M\n");
- break;
- case ATOM_TV_PALN:
- tv_std = TV_STD_PAL_N;
- DRM_INFO("Default TV standard: PAL-N\n");
- break;
- case ATOM_TV_PALCN:
- tv_std = TV_STD_PAL_CN;
- DRM_INFO("Default TV standard: PAL-CN\n");
- break;
- case ATOM_TV_PAL60:
- tv_std = TV_STD_PAL_60;
- DRM_INFO("Default TV standard: PAL-60\n");
- break;
- case ATOM_TV_SECAM:
- tv_std = TV_STD_SECAM;
- DRM_INFO("Default TV standard: SECAM\n");
- break;
- default:
- tv_std = TV_STD_NTSC;
- DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
- break;
+ switch (tv_info->ucTV_BootUpDefaultStandard) {
+ case ATOM_TV_NTSC:
+ tv_std = TV_STD_NTSC;
+ DRM_INFO("Default TV standard: NTSC\n");
+ break;
+ case ATOM_TV_NTSCJ:
+ tv_std = TV_STD_NTSC_J;
+ DRM_INFO("Default TV standard: NTSC-J\n");
+ break;
+ case ATOM_TV_PAL:
+ tv_std = TV_STD_PAL;
+ DRM_INFO("Default TV standard: PAL\n");
+ break;
+ case ATOM_TV_PALM:
+ tv_std = TV_STD_PAL_M;
+ DRM_INFO("Default TV standard: PAL-M\n");
+ break;
+ case ATOM_TV_PALN:
+ tv_std = TV_STD_PAL_N;
+ DRM_INFO("Default TV standard: PAL-N\n");
+ break;
+ case ATOM_TV_PALCN:
+ tv_std = TV_STD_PAL_CN;
+ DRM_INFO("Default TV standard: PAL-CN\n");
+ break;
+ case ATOM_TV_PAL60:
+ tv_std = TV_STD_PAL_60;
+ DRM_INFO("Default TV standard: PAL-60\n");
+ break;
+ case ATOM_TV_SECAM:
+ tv_std = TV_STD_SECAM;
+ DRM_INFO("Default TV standard: SECAM\n");
+ break;
+ default:
+ tv_std = TV_STD_NTSC;
+ DRM_INFO("Unknown TV standard; defaulting to NTSC\n");
+ break;
+ }
}
return tv_std;
}
uint8_t bg, dac;
struct radeon_encoder_tv_dac *tv_dac = NULL;
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
- dac_info = (struct _COMPASSIONATE_DATA *)(mode_info->atom_context->bios + data_offset);
+ dac_info = (struct _COMPASSIONATE_DATA *)
+ (mode_info->atom_context->bios + data_offset);
- if (dac_info) {
tv_dac = kzalloc(sizeof(struct radeon_encoder_tv_dac), GFP_KERNEL);
if (!tv_dac)
return tv_dac;
}
+static const char *thermal_controller_names[] = {
+ "NONE",
+ "LM63",
+ "ADM1032",
+ "ADM1030",
+ "MUA6649",
+ "LM64",
+ "F75375",
+ "ASC7512",
+};
+
+static const char *pp_lib_thermal_controller_names[] = {
+ "NONE",
+ "LM63",
+ "ADM1032",
+ "ADM1030",
+ "MUA6649",
+ "LM64",
+ "F75375",
+ "RV6xx",
+ "RV770",
+ "ADT7473",
+};
+
union power_info {
struct _ATOM_POWERPLAY_INFO info;
struct _ATOM_POWERPLAY_INFO_V2 info_2;
struct _ATOM_PPLIB_STATE *power_state;
int num_modes = 0, i, j;
int state_index = 0, mode_index = 0;
-
- atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, &crev, &data_offset);
-
- power_info = (union power_info *)(mode_info->atom_context->bios + data_offset);
+ struct radeon_i2c_bus_rec i2c_bus;
rdev->pm.default_power_state = NULL;
- if (power_info) {
+ if (atom_parse_data_header(mode_info->atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ power_info = (union power_info *)(mode_info->atom_context->bios + data_offset);
if (frev < 4) {
+ /* add the i2c bus for thermal/fan chip */
+ if (power_info->info.ucOverdriveThermalController > 0) {
+ DRM_INFO("Possible %s thermal controller at 0x%02x\n",
+ thermal_controller_names[power_info->info.ucOverdriveThermalController],
+ power_info->info.ucOverdriveControllerAddress >> 1);
+ i2c_bus = radeon_lookup_i2c_gpio(rdev, power_info->info.ucOverdriveI2cLine);
+ rdev->pm.i2c_bus = radeon_i2c_create(rdev->ddev, &i2c_bus, "Thermal");
+ }
num_modes = power_info->info.ucNumOfPowerModeEntries;
if (num_modes > ATOM_MAX_NUMBEROF_POWER_BLOCK)
num_modes = ATOM_MAX_NUMBEROF_POWER_BLOCK;
}
}
} else if (frev == 4) {
+ /* add the i2c bus for thermal/fan chip */
+ /* no support for internal controller yet */
+ if (power_info->info_4.sThermalController.ucType > 0) {
+ if ((power_info->info_4.sThermalController.ucType == ATOM_PP_THERMALCONTROLLER_RV6xx) ||
+ (power_info->info_4.sThermalController.ucType == ATOM_PP_THERMALCONTROLLER_RV770)) {
+ DRM_INFO("Internal thermal controller %s fan control\n",
+ (power_info->info_4.sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+ } else {
+ DRM_INFO("Possible %s thermal controller at 0x%02x %s fan control\n",
+ pp_lib_thermal_controller_names[power_info->info_4.sThermalController.ucType],
+ power_info->info_4.sThermalController.ucI2cAddress >> 1,
+ (power_info->info_4.sThermalController.ucFanParameters &
+ ATOM_PP_FANPARAMETERS_NOFAN) ? "without" : "with");
+ i2c_bus = radeon_lookup_i2c_gpio(rdev, power_info->info_4.sThermalController.ucI2cLine);
+ rdev->pm.i2c_bus = radeon_i2c_create(rdev->ddev, &i2c_bus, "Thermal");
+ }
+ }
for (i = 0; i < power_info->info_4.ucNumStates; i++) {
mode_index = 0;
power_state = (struct _ATOM_PPLIB_STATE *)
* ATPX support for both Intel/ATI
*/
#include <linux/vga_switcheroo.h>
+#include <linux/slab.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <linux/pci.h>
#include "atom.h"
#include <linux/vga_switcheroo.h>
+#include <linux/slab.h>
/*
* BIOS.
*/
case CHIP_RS300:
switch (ddc_line) {
case RADEON_GPIO_DVI_DDC:
- /* in theory this should be hw capable,
- * but it doesn't seem to work
- */
- i2c.hw_capable = false;
+ i2c.hw_capable = true;
break;
default:
i2c.hw_capable = false;
p1pll->reference_div = RBIOS16(pll_info + 0x10);
p1pll->pll_out_min = RBIOS32(pll_info + 0x12);
p1pll->pll_out_max = RBIOS32(pll_info + 0x16);
+ p1pll->lcd_pll_out_min = p1pll->pll_out_min;
+ p1pll->lcd_pll_out_max = p1pll->pll_out_max;
if (rev > 9) {
p1pll->pll_in_min = RBIOS32(pll_info + 0x36);
dac = RBIOS8(dac_info + 0x3) & 0xf;
p_dac->ps2_pdac_adj = (bg << 8) | (dac);
}
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (p_dac->ps2_pdac_adj)
+ found = 1;
}
if (!found) /* fallback to defaults */
bg = RBIOS8(dac_info + 0x10) & 0xf;
dac = RBIOS8(dac_info + 0x11) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
} else if (rev > 1) {
bg = RBIOS8(dac_info + 0xc) & 0xf;
dac = (RBIOS8(dac_info + 0xc) >> 4) & 0xf;
bg = RBIOS8(dac_info + 0xe) & 0xf;
dac = (RBIOS8(dac_info + 0xe) >> 4) & 0xf;
tv_dac->ntsc_tvdac_adj = (bg << 16) | (dac << 20);
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
}
tv_dac->tv_std = radeon_combios_get_tv_info(rdev);
}
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
} else {
bg = RBIOS8(dac_info + 0x4) & 0xf;
dac = RBIOS8(dac_info + 0x5) & 0xf;
(bg << 16) | (dac << 20);
tv_dac->pal_tvdac_adj = tv_dac->ps2_tvdac_adj;
tv_dac->ntsc_tvdac_adj = tv_dac->ps2_tvdac_adj;
- found = 1;
+ /* if the values are all zeros, use the table */
+ if (tv_dac->ps2_tvdac_adj)
+ found = 1;
}
} else {
DRM_INFO("No TV DAC info found in BIOS\n");
{
struct drm_device *dev = connector->dev;
struct drm_connector *conflict;
+ struct radeon_connector *radeon_conflict;
int i;
list_for_each_entry(conflict, &dev->mode_config.connector_list, head) {
if (conflict == connector)
continue;
+ radeon_conflict = to_radeon_connector(conflict);
for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
if (conflict->encoder_ids[i] == 0)
break;
if (conflict->status != connector_status_connected)
continue;
+ if (radeon_conflict->use_digital)
+ continue;
+
if (priority == true) {
DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
if (property == rdev->mode_info.coherent_mode_property) {
struct radeon_encoder_atom_dig *dig;
+ bool new_coherent_mode;
/* need to find digital encoder on connector */
encoder = radeon_find_encoder(connector, DRM_MODE_ENCODER_TMDS);
return 0;
dig = radeon_encoder->enc_priv;
- dig->coherent_mode = val ? true : false;
- radeon_property_change_mode(&radeon_encoder->base);
+ new_coherent_mode = val ? true : false;
+ if (dig->coherent_mode != new_coherent_mode) {
+ dig->coherent_mode = new_coherent_mode;
+ radeon_property_change_mode(&radeon_encoder->base);
+ }
}
if (property == rdev->mode_info.tv_std_property) {
radeon_encoder = to_radeon_encoder(encoder);
if (!radeon_encoder->enc_priv)
return 0;
- if (rdev->is_atom_bios) {
+ if (ASIC_IS_AVIVO(rdev) || radeon_r4xx_atom) {
struct radeon_encoder_atom_dac *dac_int;
dac_int = radeon_encoder->enc_priv;
dac_int->tv_std = val;
if (radeon_connector->edid)
kfree(radeon_connector->edid);
if (radeon_dig_connector->dp_i2c_bus)
- radeon_i2c_destroy_dp(radeon_dig_connector->dp_i2c_bus);
+ radeon_i2c_destroy(radeon_dig_connector->dp_i2c_bus);
kfree(radeon_connector->con_priv);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
if (!radeon_connector->ddc_bus)
goto failed;
+ }
+ if (connector_type == DRM_MODE_CONNECTOR_DVII) {
radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
return -EBUSY;
}
-static void radeon_init_pipes(drm_radeon_private_t *dev_priv)
+static void radeon_init_pipes(struct drm_device *dev)
{
+ drm_radeon_private_t *dev_priv = dev->dev_private;
uint32_t gb_tile_config, gb_pipe_sel = 0;
if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) {
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) {
gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT);
dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1;
+ /* SE cards have 1 pipe */
+ if ((dev->pdev->device == 0x5e4c) ||
+ (dev->pdev->device == 0x5e4f))
+ dev_priv->num_gb_pipes = 1;
} else {
/* R3xx */
- if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) ||
- ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) {
+ if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300 &&
+ dev->pdev->device != 0x4144) ||
+ ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350 &&
+ dev->pdev->device != 0x4148)) {
dev_priv->num_gb_pipes = 2;
} else {
- /* R3Vxx */
+ /* RV3xx/R300 AD/R350 AH */
dev_priv->num_gb_pipes = 1;
}
}
/* setup the raster pipes */
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300)
- radeon_init_pipes(dev_priv);
+ radeon_init_pipes(dev);
/* Reset the CP ring */
radeon_do_cp_reset(dev_priv);
radeon_bo_list_fence(&parser->validated, parser->ib->fence);
}
radeon_bo_list_unreserve(&parser->validated);
- for (i = 0; i < parser->nrelocs; i++) {
- if (parser->relocs[i].gobj)
- drm_gem_object_unreference_unlocked(parser->relocs[i].gobj);
+ if (parser->relocs != NULL) {
+ for (i = 0; i < parser->nrelocs; i++) {
+ if (parser->relocs[i].gobj)
+ drm_gem_object_unreference_unlocked(parser->relocs[i].gobj);
+ }
}
kfree(parser->track);
kfree(parser->relocs);
}
r = radeon_cs_parser_relocs(&parser);
if (r) {
- DRM_ERROR("Failed to parse relocation !\n");
+ if (r != -ERESTARTSYS)
+ DRM_ERROR("Failed to parse relocation %d!\n", r);
radeon_cs_parser_fini(&parser, r);
mutex_unlock(&rdev->cs_mutex);
return r;
* Jerome Glisse
*/
#include <linux/console.h>
+#include <linux/slab.h>
#include <drm/drmP.h>
#include <drm/drm_crtc_helper.h>
#include <drm/radeon_drm.h>
#include <linux/vga_switcheroo.h>
#include "radeon_reg.h"
#include "radeon.h"
-#include "radeon_asic.h"
#include "atom.h"
+static const char radeon_family_name[][16] = {
+ "R100",
+ "RV100",
+ "RS100",
+ "RV200",
+ "RS200",
+ "R200",
+ "RV250",
+ "RS300",
+ "RV280",
+ "R300",
+ "R350",
+ "RV350",
+ "RV380",
+ "R420",
+ "R423",
+ "RV410",
+ "RS400",
+ "RS480",
+ "RS600",
+ "RS690",
+ "RS740",
+ "RV515",
+ "R520",
+ "RV530",
+ "RV560",
+ "RV570",
+ "R580",
+ "R600",
+ "RV610",
+ "RV630",
+ "RV670",
+ "RV620",
+ "RV635",
+ "RS780",
+ "RS880",
+ "RV770",
+ "RV730",
+ "RV710",
+ "RV740",
+ "CEDAR",
+ "REDWOOD",
+ "JUNIPER",
+ "CYPRESS",
+ "HEMLOCK",
+ "LAST",
+};
+
/*
* Clear GPU surface registers.
*/
}
+void radeon_update_bandwidth_info(struct radeon_device *rdev)
+{
+ fixed20_12 a;
+ u32 sclk, mclk;
+
+ if (rdev->flags & RADEON_IS_IGP) {
+ sclk = radeon_get_engine_clock(rdev);
+ mclk = rdev->clock.default_mclk;
+
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ rdev->pm.mclk.full = rfixed_const(mclk);
+ rdev->pm.mclk.full = rfixed_div(rdev->pm.mclk, a);
+
+ a.full = rfixed_const(16);
+ /* core_bandwidth = sclk(Mhz) * 16 */
+ rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
+ } else {
+ sclk = radeon_get_engine_clock(rdev);
+ mclk = radeon_get_memory_clock(rdev);
+
+ a.full = rfixed_const(100);
+ rdev->pm.sclk.full = rfixed_const(sclk);
+ rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ rdev->pm.mclk.full = rfixed_const(mclk);
+ rdev->pm.mclk.full = rfixed_div(rdev->pm.mclk, a);
+ }
+}
+
bool radeon_boot_test_post_card(struct radeon_device *rdev)
{
if (radeon_card_posted(rdev))
}
-/*
- * Registers accessors functions.
- */
-uint32_t radeon_invalid_rreg(struct radeon_device *rdev, uint32_t reg)
-{
- DRM_ERROR("Invalid callback to read register 0x%04X\n", reg);
- BUG_ON(1);
- return 0;
-}
-
-void radeon_invalid_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
-{
- DRM_ERROR("Invalid callback to write register 0x%04X with 0x%08X\n",
- reg, v);
- BUG_ON(1);
-}
-
-void radeon_register_accessor_init(struct radeon_device *rdev)
-{
- rdev->mc_rreg = &radeon_invalid_rreg;
- rdev->mc_wreg = &radeon_invalid_wreg;
- rdev->pll_rreg = &radeon_invalid_rreg;
- rdev->pll_wreg = &radeon_invalid_wreg;
- rdev->pciep_rreg = &radeon_invalid_rreg;
- rdev->pciep_wreg = &radeon_invalid_wreg;
-
- /* Don't change order as we are overridding accessor. */
- if (rdev->family < CHIP_RV515) {
- rdev->pcie_reg_mask = 0xff;
- } else {
- rdev->pcie_reg_mask = 0x7ff;
- }
- /* FIXME: not sure here */
- if (rdev->family <= CHIP_R580) {
- rdev->pll_rreg = &r100_pll_rreg;
- rdev->pll_wreg = &r100_pll_wreg;
- }
- if (rdev->family >= CHIP_R420) {
- rdev->mc_rreg = &r420_mc_rreg;
- rdev->mc_wreg = &r420_mc_wreg;
- }
- if (rdev->family >= CHIP_RV515) {
- rdev->mc_rreg = &rv515_mc_rreg;
- rdev->mc_wreg = &rv515_mc_wreg;
- }
- if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) {
- rdev->mc_rreg = &rs400_mc_rreg;
- rdev->mc_wreg = &rs400_mc_wreg;
- }
- if (rdev->family == CHIP_RS690 || rdev->family == CHIP_RS740) {
- rdev->mc_rreg = &rs690_mc_rreg;
- rdev->mc_wreg = &rs690_mc_wreg;
- }
- if (rdev->family == CHIP_RS600) {
- rdev->mc_rreg = &rs600_mc_rreg;
- rdev->mc_wreg = &rs600_mc_wreg;
- }
- if ((rdev->family >= CHIP_R600) && (rdev->family <= CHIP_RV740)) {
- rdev->pciep_rreg = &r600_pciep_rreg;
- rdev->pciep_wreg = &r600_pciep_wreg;
- }
-}
-
-
-/*
- * ASIC
- */
-int radeon_asic_init(struct radeon_device *rdev)
-{
- radeon_register_accessor_init(rdev);
- switch (rdev->family) {
- case CHIP_R100:
- case CHIP_RV100:
- case CHIP_RS100:
- case CHIP_RV200:
- case CHIP_RS200:
- rdev->asic = &r100_asic;
- break;
- case CHIP_R200:
- case CHIP_RV250:
- case CHIP_RS300:
- case CHIP_RV280:
- rdev->asic = &r200_asic;
- break;
- case CHIP_R300:
- case CHIP_R350:
- case CHIP_RV350:
- case CHIP_RV380:
- if (rdev->flags & RADEON_IS_PCIE)
- rdev->asic = &r300_asic_pcie;
- else
- rdev->asic = &r300_asic;
- break;
- case CHIP_R420:
- case CHIP_R423:
- case CHIP_RV410:
- rdev->asic = &r420_asic;
- break;
- case CHIP_RS400:
- case CHIP_RS480:
- rdev->asic = &rs400_asic;
- break;
- case CHIP_RS600:
- rdev->asic = &rs600_asic;
- break;
- case CHIP_RS690:
- case CHIP_RS740:
- rdev->asic = &rs690_asic;
- break;
- case CHIP_RV515:
- rdev->asic = &rv515_asic;
- break;
- case CHIP_R520:
- case CHIP_RV530:
- case CHIP_RV560:
- case CHIP_RV570:
- case CHIP_R580:
- rdev->asic = &r520_asic;
- break;
- case CHIP_R600:
- case CHIP_RV610:
- case CHIP_RV630:
- case CHIP_RV620:
- case CHIP_RV635:
- case CHIP_RV670:
- case CHIP_RS780:
- case CHIP_RS880:
- rdev->asic = &r600_asic;
- break;
- case CHIP_RV770:
- case CHIP_RV730:
- case CHIP_RV710:
- case CHIP_RV740:
- rdev->asic = &rv770_asic;
- break;
- case CHIP_CEDAR:
- case CHIP_REDWOOD:
- case CHIP_JUNIPER:
- case CHIP_CYPRESS:
- case CHIP_HEMLOCK:
- rdev->asic = &evergreen_asic;
- break;
- default:
- /* FIXME: not supported yet */
- return -EINVAL;
- }
-
- if (rdev->flags & RADEON_IS_IGP) {
- rdev->asic->get_memory_clock = NULL;
- rdev->asic->set_memory_clock = NULL;
- }
-
- return 0;
-}
-
-
-/*
- * Wrapper around modesetting bits.
- */
-int radeon_clocks_init(struct radeon_device *rdev)
-{
- int r;
-
- r = radeon_static_clocks_init(rdev->ddev);
- if (r) {
- return r;
- }
- DRM_INFO("Clocks initialized !\n");
- return 0;
-}
-
-void radeon_clocks_fini(struct radeon_device *rdev)
-{
-}
-
/* ATOM accessor methods */
static uint32_t cail_pll_read(struct card_info *info, uint32_t reg)
{
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
-void radeon_agp_disable(struct radeon_device *rdev)
-{
- rdev->flags &= ~RADEON_IS_AGP;
- if (rdev->family >= CHIP_R600) {
- DRM_INFO("Forcing AGP to PCIE mode\n");
- rdev->flags |= RADEON_IS_PCIE;
- } else if (rdev->family >= CHIP_RV515 ||
- rdev->family == CHIP_RV380 ||
- rdev->family == CHIP_RV410 ||
- rdev->family == CHIP_R423) {
- DRM_INFO("Forcing AGP to PCIE mode\n");
- rdev->flags |= RADEON_IS_PCIE;
- rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
- rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
- } else {
- DRM_INFO("Forcing AGP to PCI mode\n");
- rdev->flags |= RADEON_IS_PCI;
- rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
- rdev->asic->gart_set_page = &r100_pci_gart_set_page;
- }
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-}
-
void radeon_check_arguments(struct radeon_device *rdev)
{
/* vramlimit must be a power of two */
int r;
int dma_bits;
- DRM_INFO("radeon: Initializing kernel modesetting.\n");
rdev->shutdown = false;
rdev->dev = &pdev->dev;
rdev->ddev = ddev;
rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
rdev->gpu_lockup = false;
rdev->accel_working = false;
+
+ DRM_INFO("initializing kernel modesetting (%s 0x%04X:0x%04X).\n",
+ radeon_family_name[rdev->family], pdev->vendor, pdev->device);
+
/* mutex initialization are all done here so we
* can recall function without having locking issues */
mutex_init(&rdev->cs_mutex);
return r;
radeon_check_arguments(rdev);
+ /* all of the newer IGP chips have an internal gart
+ * However some rs4xx report as AGP, so remove that here.
+ */
+ if ((rdev->family >= CHIP_RS400) &&
+ (rdev->flags & RADEON_IS_IGP)) {
+ rdev->flags &= ~RADEON_IS_AGP;
+ }
+
if (rdev->flags & RADEON_IS_AGP && radeon_agpmode == -1) {
radeon_agp_disable(rdev);
}
WREG32(EVERGREEN_DC_LUT_WHITE_OFFSET_GREEN + radeon_crtc->crtc_offset, 0xffff);
WREG32(EVERGREEN_DC_LUT_WHITE_OFFSET_RED + radeon_crtc->crtc_offset, 0xffff);
- WREG32(EVERGREEN_DC_LUT_RW_MODE, radeon_crtc->crtc_id);
- WREG32(EVERGREEN_DC_LUT_WRITE_EN_MASK, 0x00000007);
+ WREG32(EVERGREEN_DC_LUT_RW_MODE + radeon_crtc->crtc_offset, 0);
+ WREG32(EVERGREEN_DC_LUT_WRITE_EN_MASK + radeon_crtc->crtc_offset, 0x00000007);
- WREG32(EVERGREEN_DC_LUT_RW_INDEX, 0);
+ WREG32(EVERGREEN_DC_LUT_RW_INDEX + radeon_crtc->crtc_offset, 0);
for (i = 0; i < 256; i++) {
- WREG32(EVERGREEN_DC_LUT_30_COLOR,
+ WREG32(EVERGREEN_DC_LUT_30_COLOR + radeon_crtc->crtc_offset,
(radeon_crtc->lut_r[i] << 20) |
(radeon_crtc->lut_g[i] << 10) |
(radeon_crtc->lut_b[i] << 0));
if (rdev->bios) {
if (rdev->is_atom_bios) {
- if (rdev->family >= CHIP_R600)
+ ret = radeon_get_atom_connector_info_from_supported_devices_table(dev);
+ if (ret == false)
ret = radeon_get_atom_connector_info_from_object_table(dev);
- else
- ret = radeon_get_atom_connector_info_from_supported_devices_table(dev);
} else {
ret = radeon_get_legacy_connector_info_from_bios(dev);
if (ret == false)
uint32_t best_error = 0xffffffff;
uint32_t best_vco_diff = 1;
uint32_t post_div;
+ u32 pll_out_min, pll_out_max;
DRM_DEBUG("PLL freq %llu %u %u\n", freq, pll->min_ref_div, pll->max_ref_div);
freq = freq * 1000;
+ if (pll->flags & RADEON_PLL_IS_LCD) {
+ pll_out_min = pll->lcd_pll_out_min;
+ pll_out_max = pll->lcd_pll_out_max;
+ } else {
+ pll_out_min = pll->pll_out_min;
+ pll_out_max = pll->pll_out_max;
+ }
+
if (pll->flags & RADEON_PLL_USE_REF_DIV)
min_ref_div = max_ref_div = pll->reference_div;
else {
tmp = (uint64_t)pll->reference_freq * feedback_div;
vco = radeon_div(tmp, ref_div);
- if (vco < pll->pll_out_min) {
+ if (vco < pll_out_min) {
min_feed_div = feedback_div + 1;
continue;
- } else if (vco > pll->pll_out_max) {
+ } else if (vco > pll_out_max) {
max_feed_div = feedback_div;
continue;
}
{
fixed20_12 ffreq, max_error, error, pll_out, a;
u32 vco;
+ u32 pll_out_min, pll_out_max;
+
+ if (pll->flags & RADEON_PLL_IS_LCD) {
+ pll_out_min = pll->lcd_pll_out_min;
+ pll_out_max = pll->lcd_pll_out_max;
+ } else {
+ pll_out_min = pll->pll_out_min;
+ pll_out_max = pll->pll_out_max;
+ }
ffreq.full = rfixed_const(freq);
/* max_error = ffreq * 0.0025; */
vco = pll->reference_freq * (((*fb_div) * 10) + (*fb_div_frac));
vco = vco / ((*ref_div) * 10);
- if ((vco < pll->pll_out_min) || (vco > pll->pll_out_max))
+ if ((vco < pll_out_min) || (vco > pll_out_max))
continue;
/* pll_out = vco / post_div; */
{
u32 fb_div = 0, fb_div_frac = 0, post_div = 0, ref_div = 0;
u32 best_freq = 0, vco_frequency;
+ u32 pll_out_min, pll_out_max;
+
+ if (pll->flags & RADEON_PLL_IS_LCD) {
+ pll_out_min = pll->lcd_pll_out_min;
+ pll_out_max = pll->lcd_pll_out_max;
+ } else {
+ pll_out_min = pll->pll_out_min;
+ pll_out_max = pll->pll_out_max;
+ }
/* freq = freq / 10; */
do_div(freq, 10);
goto done;
vco_frequency = freq * post_div;
- if ((vco_frequency < pll->pll_out_min) || (vco_frequency > pll->pll_out_max))
+ if ((vco_frequency < pll_out_min) || (vco_frequency > pll_out_max))
goto done;
if (pll->flags & RADEON_PLL_USE_REF_DIV) {
continue;
vco_frequency = freq * post_div;
- if ((vco_frequency < pll->pll_out_min) || (vco_frequency > pll->pll_out_max))
+ if ((vco_frequency < pll_out_min) || (vco_frequency > pll_out_max))
continue;
if (pll->flags & RADEON_PLL_USE_REF_DIV) {
ref_div = pll->reference_div;
return 0;
}
+void radeon_update_display_priority(struct radeon_device *rdev)
+{
+ /* adjustment options for the display watermarks */
+ if ((radeon_disp_priority == 0) || (radeon_disp_priority > 2)) {
+ /* set display priority to high for r3xx, rv515 chips
+ * this avoids flickering due to underflow to the
+ * display controllers during heavy acceleration.
+ */
+ if (ASIC_IS_R300(rdev) || (rdev->family == CHIP_RV515))
+ rdev->disp_priority = 2;
+ else
+ rdev->disp_priority = 0;
+ } else
+ rdev->disp_priority = radeon_disp_priority;
+
+}
+
int radeon_modeset_init(struct radeon_device *rdev)
{
int i;
radeon_combios_check_hardcoded_edid(rdev);
}
- if (rdev->flags & RADEON_SINGLE_CRTC)
- rdev->num_crtc = 1;
- else {
- if (ASIC_IS_DCE4(rdev))
- rdev->num_crtc = 6;
- else
- rdev->num_crtc = 2;
- }
-
/* allocate crtcs */
for (i = 0; i < rdev->num_crtc; i++) {
radeon_crtc_init(rdev->ddev, i);
* KMS wrapper.
* - 2.0.0 - initial interface
* - 2.1.0 - add square tiling interface
+ * - 2.2.0 - add r6xx/r7xx const buffer support
+ * - 2.3.0 - add MSPOS + 3D texture + r500 VAP regs
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 1
+#define KMS_DRIVER_MINOR 3
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
int radeon_new_pll = -1;
int radeon_dynpm = -1;
int radeon_audio = 1;
+int radeon_disp_priority = 0;
+int radeon_hw_i2c = 0;
MODULE_PARM_DESC(no_wb, "Disable AGP writeback for scratch registers");
module_param_named(no_wb, radeon_no_wb, int, 0444);
MODULE_PARM_DESC(audio, "Audio enable (0 = disable)");
module_param_named(audio, radeon_audio, int, 0444);
+MODULE_PARM_DESC(disp_priority, "Display Priority (0 = auto, 1 = normal, 2 = high)");
+module_param_named(disp_priority, radeon_disp_priority, int, 0444);
+
+MODULE_PARM_DESC(hw_i2c, "hw i2c engine enable (0 = disable)");
+module_param_named(hw_i2c, radeon_hw_i2c, int, 0444);
+
static int radeon_suspend(struct drm_device *dev, pm_message_t state)
{
drm_radeon_private_t *dev_priv = dev->dev_private;
.mmap = drm_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+ .read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = radeon_compat_ioctl,
#endif
.mmap = radeon_mmap,
.poll = drm_poll,
.fasync = drm_fasync,
+ .read = drm_read,
#ifdef CONFIG_COMPAT
.compat_ioctl = radeon_kms_compat_ioctl,
#endif
* 1.30- Add support for occlusion queries
* 1.31- Add support for num Z pipes from GET_PARAM
* 1.32- fixes for rv740 setup
+ * 1.33- Add r6xx/r7xx const buffer support
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 32
+#define DRIVER_MINOR 33
#define DRIVER_PATCHLEVEL 0
enum radeon_cp_microcode_version {
return dig_connector;
}
+void radeon_panel_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+ unsigned hblank = native_mode->htotal - native_mode->hdisplay;
+ unsigned vblank = native_mode->vtotal - native_mode->vdisplay;
+ unsigned hover = native_mode->hsync_start - native_mode->hdisplay;
+ unsigned vover = native_mode->vsync_start - native_mode->vdisplay;
+ unsigned hsync_width = native_mode->hsync_end - native_mode->hsync_start;
+ unsigned vsync_width = native_mode->vsync_end - native_mode->vsync_start;
+
+ adjusted_mode->clock = native_mode->clock;
+ adjusted_mode->flags = native_mode->flags;
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ adjusted_mode->hdisplay = native_mode->hdisplay;
+ adjusted_mode->vdisplay = native_mode->vdisplay;
+ }
+
+ adjusted_mode->htotal = native_mode->hdisplay + hblank;
+ adjusted_mode->hsync_start = native_mode->hdisplay + hover;
+ adjusted_mode->hsync_end = adjusted_mode->hsync_start + hsync_width;
+
+ adjusted_mode->vtotal = native_mode->vdisplay + vblank;
+ adjusted_mode->vsync_start = native_mode->vdisplay + vover;
+ adjusted_mode->vsync_end = adjusted_mode->vsync_start + vsync_width;
+
+ drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ adjusted_mode->crtc_hdisplay = native_mode->hdisplay;
+ adjusted_mode->crtc_vdisplay = native_mode->vdisplay;
+ }
+
+ adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + hblank;
+ adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + hover;
+ adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + hsync_width;
+
+ adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + vblank;
+ adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + vover;
+ adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + vsync_width;
+
+}
+
static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
/* get the native mode for LVDS */
- if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
- struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
- int mode_id = adjusted_mode->base.id;
- *adjusted_mode = *native_mode;
- if (!ASIC_IS_AVIVO(rdev)) {
- adjusted_mode->hdisplay = mode->hdisplay;
- adjusted_mode->vdisplay = mode->vdisplay;
- adjusted_mode->crtc_hdisplay = mode->hdisplay;
- adjusted_mode->crtc_vdisplay = mode->vdisplay;
- }
- adjusted_mode->base.id = mode_id;
- }
+ if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
+ radeon_panel_mode_fixup(encoder, adjusted_mode);
/* get the native mode for TV */
if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
}
if (ASIC_IS_DCE3(rdev) &&
- (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT))) {
+ (radeon_encoder->active_device & (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT))) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
radeon_dp_set_link_config(connector, mode);
}
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
DAC_ENCODER_CONTROL_PS_ALLOCATION args;
- int index = 0, num = 0;
+ int index = 0;
struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
- enum radeon_tv_std tv_std = TV_STD_NTSC;
-
- if (dac_info->tv_std)
- tv_std = dac_info->tv_std;
memset(&args, 0, sizeof(args));
case ENCODER_OBJECT_ID_INTERNAL_DAC1:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
index = GetIndexIntoMasterTable(COMMAND, DAC1EncoderControl);
- num = 1;
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC2:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
index = GetIndexIntoMasterTable(COMMAND, DAC2EncoderControl);
- num = 2;
break;
}
else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
args.ucDacStandard = ATOM_DAC1_CV;
else {
- switch (tv_std) {
+ switch (dac_info->tv_std) {
case TV_STD_PAL:
case TV_STD_PAL_M:
case TV_STD_SCART_PAL:
TV_ENCODER_CONTROL_PS_ALLOCATION args;
int index = 0;
struct radeon_encoder_atom_dac *dac_info = radeon_encoder->enc_priv;
- enum radeon_tv_std tv_std = TV_STD_NTSC;
-
- if (dac_info->tv_std)
- tv_std = dac_info->tv_std;
memset(&args, 0, sizeof(args));
if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
args.sTVEncoder.ucTvStandard = ATOM_TV_CV;
else {
- switch (tv_std) {
+ switch (dac_info->tv_std) {
case TV_STD_NTSC:
args.sTVEncoder.ucTvStandard = ATOM_TV_NTSC;
break;
break;
}
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
switch (frev) {
case 1:
}
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
- r600_hdmi_enable(encoder, hdmi_detected);
}
int
struct radeon_connector_atom_dig *dig_connector =
radeon_get_atom_connector_priv_from_encoder(encoder);
union dig_encoder_control args;
- int index = 0, num = 0;
+ int index = 0;
uint8_t frev, crev;
if (!dig || !dig_connector)
else
index = GetIndexIntoMasterTable(COMMAND, DIG1EncoderControl);
}
- num = dig->dig_encoder + 1;
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
args.v1.ucAction = action;
args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
union dig_transmitter_control args;
- int index = 0, num = 0;
+ int index = 0;
uint8_t frev, crev;
bool is_dp = false;
int pll_id = 0;
}
}
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
args.v1.ucAction = action;
if (action == ATOM_TRANSMITTER_ACTION_INIT) {
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
args.v3.acConfig.ucTransmitterSel = 0;
- num = 0;
break;
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
args.v3.acConfig.ucTransmitterSel = 1;
- num = 1;
break;
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
args.v3.acConfig.ucTransmitterSel = 2;
- num = 2;
break;
}
else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
if (dig->coherent_mode)
args.v3.acConfig.fCoherentMode = 1;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v3.acConfig.fDualLinkConnector = 1;
}
} else if (ASIC_IS_DCE32(rdev)) {
- if (dig->dig_encoder == 1)
- args.v2.acConfig.ucEncoderSel = 1;
+ args.v2.acConfig.ucEncoderSel = dig->dig_encoder;
if (dig_connector->linkb)
args.v2.acConfig.ucLinkSel = 1;
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
args.v2.acConfig.ucTransmitterSel = 0;
- num = 0;
break;
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
args.v2.acConfig.ucTransmitterSel = 1;
- num = 1;
break;
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
args.v2.acConfig.ucTransmitterSel = 2;
- num = 2;
break;
}
else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
if (dig->coherent_mode)
args.v2.acConfig.fCoherentMode = 1;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v2.acConfig.fDualLinkConnector = 1;
}
} else {
args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
else
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_DIG1_ENCODER;
- switch (radeon_encoder->encoder_id) {
- case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
- if (rdev->flags & RADEON_IS_IGP) {
- if (radeon_encoder->pixel_clock > 165000) {
- if (dig_connector->igp_lane_info & 0x3)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
- else if (dig_connector->igp_lane_info & 0xc)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
- } else {
- if (dig_connector->igp_lane_info & 0x1)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
- else if (dig_connector->igp_lane_info & 0x2)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
- else if (dig_connector->igp_lane_info & 0x4)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
- else if (dig_connector->igp_lane_info & 0x8)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
- }
+ if ((rdev->flags & RADEON_IS_IGP) &&
+ (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY)) {
+ if (is_dp || (radeon_encoder->pixel_clock <= 165000)) {
+ if (dig_connector->igp_lane_info & 0x1)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_3;
+ else if (dig_connector->igp_lane_info & 0x2)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_4_7;
+ else if (dig_connector->igp_lane_info & 0x4)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_11;
+ else if (dig_connector->igp_lane_info & 0x8)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_12_15;
+ } else {
+ if (dig_connector->igp_lane_info & 0x3)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_0_7;
+ else if (dig_connector->igp_lane_info & 0xc)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LANE_8_15;
}
- break;
}
- if (radeon_encoder->pixel_clock > 165000)
- args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_8LANE_LINK;
-
if (dig_connector->linkb)
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_LINKB;
else
else if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
if (dig->coherent_mode)
args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_COHERENT;
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v1.ucConfig |= ATOM_TRANSMITTER_CONFIG_8LANE_LINK;
}
}
if (is_dig) {
switch (mode) {
case DRM_MODE_DPMS_ON:
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
- {
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
dp_link_train(encoder, connector);
+ if (ASIC_IS_DCE4(rdev))
+ atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
}
+ if (!ASIC_IS_DCE4(rdev))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT, 0, 0);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
- atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+ if (!ASIC_IS_DCE4(rdev))
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
+ if (ASIC_IS_DCE4(rdev))
+ atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF);
+ }
break;
}
} else {
memset(&args, 0, sizeof(args));
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return;
switch (frev) {
case 1:
}
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+ /* update scratch regs with new routing */
+ radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
}
static void
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
- if (radeon_encoder->active_device &
- (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
- struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
- if (dig)
- dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
- }
radeon_encoder->pixel_clock = adjusted_mode->clock;
- radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
- atombios_set_encoder_crtc_source(encoder);
-
- if (ASIC_IS_AVIVO(rdev)) {
+ if (ASIC_IS_AVIVO(rdev) && !ASIC_IS_DCE4(rdev)) {
if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT))
atombios_yuv_setup(encoder, true);
else
case ENCODER_OBJECT_ID_INTERNAL_DAC2:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
atombios_dac_setup(encoder, ATOM_ENABLE);
- if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
- atombios_tv_setup(encoder, ATOM_ENABLE);
+ if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT)) {
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT | ATOM_DEVICE_CV_SUPPORT))
+ atombios_tv_setup(encoder, ATOM_ENABLE);
+ else
+ atombios_tv_setup(encoder, ATOM_DISABLE);
+ }
break;
}
atombios_apply_encoder_quirks(encoder, adjusted_mode);
- /* XXX */
- if (!ASIC_IS_DCE4(rdev))
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
+ r600_hdmi_enable(encoder);
r600_hdmi_setmode(encoder, adjusted_mode);
+ }
}
static bool
memset(&args, 0, sizeof(args));
- atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
+ if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+ return false;
args.sDacload.ucMisc = 0;
static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
{
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+
+ if (radeon_encoder->active_device &
+ (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
+ struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
+ if (dig)
+ dig->dig_encoder = radeon_atom_pick_dig_encoder(encoder);
+ }
+
radeon_atom_output_lock(encoder, true);
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+
+ /* this is needed for the pll/ss setup to work correctly in some cases */
+ atombios_set_encoder_crtc_source(encoder);
}
static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
if (radeon_encoder_is_digital(encoder)) {
+ if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
+ r600_hdmi_disable(encoder);
dig = radeon_encoder->enc_priv;
dig->dig_encoder = -1;
}
struct radeon_encoder_atom_dac *
radeon_atombios_set_dac_info(struct radeon_encoder *radeon_encoder)
{
+ struct drm_device *dev = radeon_encoder->base.dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_encoder_atom_dac *dac = kzalloc(sizeof(struct radeon_encoder_atom_dac), GFP_KERNEL);
if (!dac)
return NULL;
- dac->tv_std = TV_STD_NTSC;
+ dac->tv_std = radeon_atombios_get_tv_info(rdev);
return dac;
}
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC1:
drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+ radeon_encoder->enc_priv = radeon_atombios_set_dac_info(radeon_encoder);
drm_encoder_helper_add(encoder, &radeon_atom_dac_helper_funcs);
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC2:
drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
break;
}
-
- r600_hdmi_init(encoder);
}
* Radeon chip families
*/
enum radeon_family {
- CHIP_R100,
+ CHIP_R100 = 0,
CHIP_RV100,
CHIP_RS100,
CHIP_RV200,
RADEON_IS_PCI = 0x00800000UL,
RADEON_IS_IGPGART = 0x01000000UL,
};
+
#endif
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/fb.h>
#include "drmP.h"
#include <linux/wait.h>
#include <linux/list.h>
#include <linux/kref.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "drm.h"
#include "radeon_reg.h"
return false;
}
+/* bit banging i2c */
static void radeon_i2c_do_lock(struct radeon_i2c_chan *i2c, int lock_state)
{
WREG32(rec->en_data_reg, val);
}
+static int pre_xfer(struct i2c_adapter *i2c_adap)
+{
+ struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
+
+ radeon_i2c_do_lock(i2c, 1);
+
+ return 0;
+}
+
+static void post_xfer(struct i2c_adapter *i2c_adap)
+{
+ struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
+
+ radeon_i2c_do_lock(i2c, 0);
+}
+
+/* hw i2c */
+
static u32 radeon_get_i2c_prescale(struct radeon_device *rdev)
{
- struct radeon_pll *spll = &rdev->clock.spll;
u32 sclk = radeon_get_engine_clock(rdev);
u32 prescale = 0;
- u32 n, m;
- u8 loop;
+ u32 nm;
+ u8 n, m, loop;
int i2c_clock;
switch (rdev->family) {
case CHIP_R300:
case CHIP_R350:
case CHIP_RV350:
- n = (spll->reference_freq) / (4 * 6);
+ i2c_clock = 60;
+ nm = (sclk * 10) / (i2c_clock * 4);
for (loop = 1; loop < 255; loop++) {
- if ((loop * (loop - 1)) > n)
+ if ((nm / loop) < loop)
break;
}
- m = loop - 1;
- prescale = m | (loop << 8);
+ n = loop - 1;
+ m = loop - 2;
+ prescale = m | (n << 8);
break;
case CHIP_RV380:
case CHIP_RS400:
case CHIP_R420:
case CHIP_R423:
case CHIP_RV410:
- sclk = radeon_get_engine_clock(rdev);
prescale = (((sclk * 10)/(4 * 128 * 100) + 1) << 8) + 128;
break;
case CHIP_RS600:
case CHIP_RV570:
case CHIP_R580:
i2c_clock = 50;
- sclk = radeon_get_engine_clock(rdev);
if (rdev->family == CHIP_R520)
prescale = (127 << 8) + ((sclk * 10) / (4 * 127 * i2c_clock));
else
prescale = radeon_get_i2c_prescale(rdev);
reg = ((prescale << RADEON_I2C_PRESCALE_SHIFT) |
+ RADEON_I2C_DRIVE_EN |
RADEON_I2C_START |
RADEON_I2C_STOP |
RADEON_I2C_GO);
return ret;
}
-static int radeon_sw_i2c_xfer(struct i2c_adapter *i2c_adap,
+static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
struct i2c_msg *msgs, int num)
-{
- struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
- int ret;
-
- radeon_i2c_do_lock(i2c, 1);
- ret = i2c_transfer(&i2c->algo.radeon.bit_adapter, msgs, num);
- radeon_i2c_do_lock(i2c, 0);
-
- return ret;
-}
-
-static int radeon_i2c_xfer(struct i2c_adapter *i2c_adap,
- struct i2c_msg *msgs, int num)
{
struct radeon_i2c_chan *i2c = i2c_get_adapdata(i2c_adap);
struct radeon_device *rdev = i2c->dev->dev_private;
struct radeon_i2c_bus_rec *rec = &i2c->rec;
- int ret;
+ int ret = 0;
switch (rdev->family) {
case CHIP_R100:
case CHIP_RV410:
case CHIP_RS400:
case CHIP_RS480:
- if (rec->hw_capable)
- ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
- else
- ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+ ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
break;
case CHIP_RS600:
case CHIP_RS690:
case CHIP_RS740:
/* XXX fill in hw i2c implementation */
- ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
break;
case CHIP_RV515:
case CHIP_R520:
case CHIP_RV560:
case CHIP_RV570:
case CHIP_R580:
- if (rec->hw_capable) {
- if (rec->mm_i2c)
- ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
- else
- ret = r500_hw_i2c_xfer(i2c_adap, msgs, num);
- } else
- ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
+ if (rec->mm_i2c)
+ ret = r100_hw_i2c_xfer(i2c_adap, msgs, num);
+ else
+ ret = r500_hw_i2c_xfer(i2c_adap, msgs, num);
break;
case CHIP_R600:
case CHIP_RV610:
case CHIP_RV630:
case CHIP_RV670:
/* XXX fill in hw i2c implementation */
- ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
break;
case CHIP_RV620:
case CHIP_RV635:
case CHIP_RV710:
case CHIP_RV740:
/* XXX fill in hw i2c implementation */
- ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
break;
case CHIP_CEDAR:
case CHIP_REDWOOD:
case CHIP_CYPRESS:
case CHIP_HEMLOCK:
/* XXX fill in hw i2c implementation */
- ret = radeon_sw_i2c_xfer(i2c_adap, msgs, num);
break;
default:
DRM_ERROR("i2c: unhandled radeon chip\n");
return ret;
}
-static u32 radeon_i2c_func(struct i2c_adapter *adap)
+static u32 radeon_hw_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm radeon_i2c_algo = {
- .master_xfer = radeon_i2c_xfer,
- .functionality = radeon_i2c_func,
+ .master_xfer = radeon_hw_i2c_xfer,
+ .functionality = radeon_hw_i2c_func,
};
struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
struct radeon_i2c_bus_rec *rec,
const char *name)
{
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_i2c_chan *i2c;
int ret;
if (i2c == NULL)
return NULL;
- /* set the internal bit adapter */
- i2c->algo.radeon.bit_adapter.owner = THIS_MODULE;
- i2c_set_adapdata(&i2c->algo.radeon.bit_adapter, i2c);
- sprintf(i2c->algo.radeon.bit_adapter.name, "Radeon internal i2c bit bus %s", name);
- i2c->algo.radeon.bit_adapter.algo_data = &i2c->algo.radeon.bit_data;
- i2c->algo.radeon.bit_data.setsda = set_data;
- i2c->algo.radeon.bit_data.setscl = set_clock;
- i2c->algo.radeon.bit_data.getsda = get_data;
- i2c->algo.radeon.bit_data.getscl = get_clock;
- i2c->algo.radeon.bit_data.udelay = 20;
- /* vesa says 2.2 ms is enough, 1 jiffy doesn't seem to always
- * make this, 2 jiffies is a lot more reliable */
- i2c->algo.radeon.bit_data.timeout = 2;
- i2c->algo.radeon.bit_data.data = i2c;
- ret = i2c_bit_add_bus(&i2c->algo.radeon.bit_adapter);
- if (ret) {
- DRM_ERROR("Failed to register internal bit i2c %s\n", name);
- goto out_free;
- }
- /* set the radeon i2c adapter */
- i2c->dev = dev;
i2c->rec = *rec;
i2c->adapter.owner = THIS_MODULE;
+ i2c->dev = dev;
i2c_set_adapdata(&i2c->adapter, i2c);
- sprintf(i2c->adapter.name, "Radeon i2c %s", name);
- i2c->adapter.algo_data = &i2c->algo.radeon;
- i2c->adapter.algo = &radeon_i2c_algo;
- ret = i2c_add_adapter(&i2c->adapter);
- if (ret) {
- DRM_ERROR("Failed to register i2c %s\n", name);
- goto out_free;
+ if (rec->mm_i2c ||
+ (rec->hw_capable &&
+ radeon_hw_i2c &&
+ ((rdev->family <= CHIP_RS480) ||
+ ((rdev->family >= CHIP_RV515) && (rdev->family <= CHIP_R580))))) {
+ /* set the radeon hw i2c adapter */
+ sprintf(i2c->adapter.name, "Radeon i2c hw bus %s", name);
+ i2c->adapter.algo = &radeon_i2c_algo;
+ ret = i2c_add_adapter(&i2c->adapter);
+ if (ret) {
+ DRM_ERROR("Failed to register hw i2c %s\n", name);
+ goto out_free;
+ }
+ } else {
+ /* set the radeon bit adapter */
+ sprintf(i2c->adapter.name, "Radeon i2c bit bus %s", name);
+ i2c->adapter.algo_data = &i2c->algo.bit;
+ i2c->algo.bit.pre_xfer = pre_xfer;
+ i2c->algo.bit.post_xfer = post_xfer;
+ i2c->algo.bit.setsda = set_data;
+ i2c->algo.bit.setscl = set_clock;
+ i2c->algo.bit.getsda = get_data;
+ i2c->algo.bit.getscl = get_clock;
+ i2c->algo.bit.udelay = 20;
+ /* vesa says 2.2 ms is enough, 1 jiffy doesn't seem to always
+ * make this, 2 jiffies is a lot more reliable */
+ i2c->algo.bit.timeout = 2;
+ i2c->algo.bit.data = i2c;
+ ret = i2c_bit_add_bus(&i2c->adapter);
+ if (ret) {
+ DRM_ERROR("Failed to register bit i2c %s\n", name);
+ goto out_free;
+ }
}
return i2c;
{
if (!i2c)
return;
- i2c_del_adapter(&i2c->algo.radeon.bit_adapter);
- i2c_del_adapter(&i2c->adapter);
- kfree(i2c);
-}
-
-void radeon_i2c_destroy_dp(struct radeon_i2c_chan *i2c)
-{
- if (!i2c)
- return;
-
i2c_del_adapter(&i2c->adapter);
kfree(i2c);
}
/* Disable *all* interrupts */
rdev->irq.sw_int = false;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < rdev->num_crtc; i++)
rdev->irq.crtc_vblank_int[i] = false;
- }
+ for (i = 0; i < 6; i++)
+ rdev->irq.hpd[i] = false;
radeon_irq_set(rdev);
/* Clear bits */
radeon_irq_process(rdev);
}
/* Disable *all* interrupts */
rdev->irq.sw_int = false;
- for (i = 0; i < 2; i++) {
+ for (i = 0; i < rdev->num_crtc; i++)
rdev->irq.crtc_vblank_int[i] = false;
+ for (i = 0; i < 6; i++)
rdev->irq.hpd[i] = false;
- }
radeon_irq_set(rdev);
}
int radeon_irq_kms_init(struct radeon_device *rdev)
{
int r = 0;
- int num_crtc = 2;
- if (rdev->flags & RADEON_SINGLE_CRTC)
- num_crtc = 1;
spin_lock_init(&rdev->irq.sw_lock);
- r = drm_vblank_init(rdev->ddev, num_crtc);
+ r = drm_vblank_init(rdev->ddev, rdev->num_crtc);
if (r) {
return r;
}
/* enable msi */
rdev->msi_enabled = 0;
- /* MSIs don't seem to work on my rs780;
- * not sure about rs880 or other rs780s.
- * Needs more investigation.
+ /* MSIs don't seem to work reliably on all IGP
+ * chips. Disable MSI on them for now.
*/
if ((rdev->family >= CHIP_RV380) &&
- (rdev->family != CHIP_RS780) &&
- (rdev->family != CHIP_RS880)) {
+ (!(rdev->flags & RADEON_IS_IGP))) {
int ret = pci_enable_msi(rdev->pdev);
if (!ret) {
rdev->msi_enabled = 1;
#include "radeon_drm.h"
#include <linux/vga_switcheroo.h>
+#include <linux/slab.h>
int radeon_driver_unload_kms(struct drm_device *dev)
{
{
struct radeon_device *rdev = dev->dev_private;
- if (crtc < 0 || crtc > 1) {
+ if (crtc < 0 || crtc >= rdev->num_crtc) {
DRM_ERROR("Invalid crtc %d\n", crtc);
return -EINVAL;
}
{
struct radeon_device *rdev = dev->dev_private;
- if (crtc < 0 || crtc > 1) {
+ if (crtc < 0 || crtc >= rdev->num_crtc) {
DRM_ERROR("Invalid crtc %d\n", crtc);
return -EINVAL;
}
{
struct radeon_device *rdev = dev->dev_private;
- if (crtc < 0 || crtc > 1) {
+ if (crtc < 0 || crtc >= rdev->num_crtc) {
DRM_ERROR("Invalid crtc %d\n", crtc);
return;
}
? RADEON_CRTC2_INTERLACE_EN
: 0));
+ /* rs4xx chips seem to like to have the crtc enabled when the timing is set */
+ if ((rdev->family == CHIP_RS400) || (rdev->family == CHIP_RS480))
+ crtc2_gen_cntl |= RADEON_CRTC2_EN;
+
disp2_merge_cntl = RREG32(RADEON_DISP2_MERGE_CNTL);
disp2_merge_cntl &= ~RADEON_DISP2_RGB_OFFSET_EN;
? RADEON_CRTC_INTERLACE_EN
: 0));
+ /* rs4xx chips seem to like to have the crtc enabled when the timing is set */
+ if ((rdev->family == CHIP_RS400) || (rdev->family == CHIP_RS480))
+ crtc_gen_cntl |= RADEON_CRTC_EN;
+
crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
crtc_ext_cntl |= (RADEON_XCRT_CNT_EN |
RADEON_CRTC_VSYNC_DIS |
drm_mode_set_crtcinfo(adjusted_mode, 0);
/* get the native mode for LVDS */
- if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
- struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
- int mode_id = adjusted_mode->base.id;
- *adjusted_mode = *native_mode;
- adjusted_mode->hdisplay = mode->hdisplay;
- adjusted_mode->vdisplay = mode->vdisplay;
- adjusted_mode->crtc_hdisplay = mode->hdisplay;
- adjusted_mode->crtc_vdisplay = mode->vdisplay;
- adjusted_mode->base.id = mode_id;
- }
+ if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
+ radeon_panel_mode_fixup(encoder, adjusted_mode);
return true;
}
crtc2_gen_cntl &= ~RADEON_CRTC2_CRT2_ON;
if (rdev->family == CHIP_R420 ||
- rdev->family == CHIP_R423 ||
- rdev->family == CHIP_RV410)
+ rdev->family == CHIP_R423 ||
+ rdev->family == CHIP_RV410)
tv_dac_cntl |= (R420_TV_DAC_RDACPD |
R420_TV_DAC_GDACPD |
R420_TV_DAC_BDACPD |
if (rdev->family != CHIP_R200) {
tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
if (rdev->family == CHIP_R420 ||
- rdev->family == CHIP_R423 ||
- rdev->family == CHIP_RV410) {
+ rdev->family == CHIP_R423 ||
+ rdev->family == CHIP_RV410) {
tv_dac_cntl &= ~(RADEON_TV_DAC_STD_MASK |
- RADEON_TV_DAC_BGADJ_MASK |
- R420_TV_DAC_DACADJ_MASK |
- R420_TV_DAC_RDACPD |
- R420_TV_DAC_GDACPD |
- R420_TV_DAC_BDACPD |
- R420_TV_DAC_TVENABLE);
+ RADEON_TV_DAC_BGADJ_MASK |
+ R420_TV_DAC_DACADJ_MASK |
+ R420_TV_DAC_RDACPD |
+ R420_TV_DAC_GDACPD |
+ R420_TV_DAC_BDACPD |
+ R420_TV_DAC_TVENABLE);
} else {
tv_dac_cntl &= ~(RADEON_TV_DAC_STD_MASK |
- RADEON_TV_DAC_BGADJ_MASK |
- RADEON_TV_DAC_DACADJ_MASK |
- RADEON_TV_DAC_RDACPD |
- RADEON_TV_DAC_GDACPD |
- RADEON_TV_DAC_BDACPD);
+ RADEON_TV_DAC_BGADJ_MASK |
+ RADEON_TV_DAC_DACADJ_MASK |
+ RADEON_TV_DAC_RDACPD |
+ RADEON_TV_DAC_GDACPD |
+ RADEON_TV_DAC_BDACPD);
}
- /* FIXME TV */
- if (tv_dac) {
- struct radeon_encoder_tv_dac *tv_dac = radeon_encoder->enc_priv;
- tv_dac_cntl |= (RADEON_TV_DAC_NBLANK |
- RADEON_TV_DAC_NHOLD |
- RADEON_TV_DAC_STD_PS2 |
- tv_dac->ps2_tvdac_adj);
+ tv_dac_cntl |= RADEON_TV_DAC_NBLANK | RADEON_TV_DAC_NHOLD;
+
+ if (is_tv) {
+ if (tv_dac->tv_std == TV_STD_NTSC ||
+ tv_dac->tv_std == TV_STD_NTSC_J ||
+ tv_dac->tv_std == TV_STD_PAL_M ||
+ tv_dac->tv_std == TV_STD_PAL_60)
+ tv_dac_cntl |= tv_dac->ntsc_tvdac_adj;
+ else
+ tv_dac_cntl |= tv_dac->pal_tvdac_adj;
+
+ if (tv_dac->tv_std == TV_STD_NTSC ||
+ tv_dac->tv_std == TV_STD_NTSC_J)
+ tv_dac_cntl |= RADEON_TV_DAC_STD_NTSC;
+ else
+ tv_dac_cntl |= RADEON_TV_DAC_STD_PAL;
} else
- tv_dac_cntl |= (RADEON_TV_DAC_NBLANK |
- RADEON_TV_DAC_NHOLD |
- RADEON_TV_DAC_STD_PS2);
+ tv_dac_cntl |= (RADEON_TV_DAC_STD_PS2 |
+ tv_dac->ps2_tvdac_adj);
WREG32(RADEON_TV_DAC_CNTL, tv_dac_cntl);
}
#define NTSC_TV_PLL_N_14 693
#define NTSC_TV_PLL_P_14 7
+#define PAL_TV_PLL_M_14 19
+#define PAL_TV_PLL_N_14 353
+#define PAL_TV_PLL_P_14 5
+
#define VERT_LEAD_IN_LINES 2
#define FRAC_BITS 0xe
#define FRAC_MASK 0x3fff
630627, /* defRestart */
347, /* crtcPLL_N */
14, /* crtcPLL_M */
- 8, /* crtcPLL_postDiv */
+ 8, /* crtcPLL_postDiv */
1022, /* pixToTV */
},
+ { /* PAL timing for 14 Mhz ref clk */
+ 800, /* horResolution */
+ 600, /* verResolution */
+ TV_STD_PAL, /* standard */
+ 1131, /* horTotal */
+ 742, /* verTotal */
+ 813, /* horStart */
+ 840, /* horSyncStart */
+ 633, /* verSyncStart */
+ 708369, /* defRestart */
+ 211, /* crtcPLL_N */
+ 9, /* crtcPLL_M */
+ 8, /* crtcPLL_postDiv */
+ 759, /* pixToTV */
+ },
};
#define N_AVAILABLE_MODES ARRAY_SIZE(available_tv_modes)
if (pll->reference_freq == 2700)
const_ptr = &available_tv_modes[1];
else
- const_ptr = &available_tv_modes[1]; /* FIX ME */
+ const_ptr = &available_tv_modes[3];
}
return const_ptr;
}
n = PAL_TV_PLL_N_27;
p = PAL_TV_PLL_P_27;
} else {
- m = PAL_TV_PLL_M_27;
- n = PAL_TV_PLL_N_27;
- p = PAL_TV_PLL_P_27;
+ m = PAL_TV_PLL_M_14;
+ n = PAL_TV_PLL_N_14;
+ p = PAL_TV_PLL_P_14;
}
}
#define RADEON_PLL_USE_FRAC_FB_DIV (1 << 10)
#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
#define RADEON_PLL_USE_POST_DIV (1 << 12)
+#define RADEON_PLL_IS_LCD (1 << 13)
/* pll algo */
enum radeon_pll_algo {
uint32_t pll_in_max;
uint32_t pll_out_min;
uint32_t pll_out_max;
+ uint32_t lcd_pll_out_min;
+ uint32_t lcd_pll_out_max;
uint32_t best_vco;
/* divider limits */
enum radeon_pll_algo algo;
};
-struct i2c_algo_radeon_data {
- struct i2c_adapter bit_adapter;
- struct i2c_algo_bit_data bit_data;
-};
-
struct radeon_i2c_chan {
struct i2c_adapter adapter;
struct drm_device *dev;
union {
+ struct i2c_algo_bit_data bit;
struct i2c_algo_dp_aux_data dp;
- struct i2c_algo_radeon_data radeon;
} algo;
struct radeon_i2c_bus_rec rec;
};
struct drm_display_mode native_mode;
void *enc_priv;
int hdmi_offset;
+ int hdmi_config_offset;
int hdmi_audio_workaround;
int hdmi_buffer_status;
};
struct radeon_i2c_bus_rec *rec,
const char *name);
extern void radeon_i2c_destroy(struct radeon_i2c_chan *i2c);
-extern void radeon_i2c_destroy_dp(struct radeon_i2c_chan *i2c);
extern void radeon_i2c_get_byte(struct radeon_i2c_chan *i2c_bus,
u8 slave_addr,
u8 addr,
bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
+void radeon_panel_mode_fixup(struct drm_encoder *encoder,
+ struct drm_display_mode *adjusted_mode);
void atom_rv515_force_tv_scaler(struct radeon_device *rdev, struct radeon_crtc *radeon_crtc);
/* legacy tv */
* Dave Airlie
*/
#include <linux/list.h>
+#include <linux/slab.h>
#include <drm/drmP.h>
#include "radeon_drm.h"
#include "radeon.h"
return 0;
}
radeon_ttm_placement_from_domain(bo, domain);
- /* force to pin into visible video ram */
- bo->placement.lpfn = bo->rdev->mc.visible_vram_size >> PAGE_SHIFT;
+ if (domain == RADEON_GEM_DOMAIN_VRAM) {
+ /* force to pin into visible video ram */
+ bo->placement.lpfn = bo->rdev->mc.visible_vram_size >> PAGE_SHIFT;
+ }
for (i = 0; i < bo->placement.num_placement; i++)
bo->placements[i] |= TTM_PL_FLAG_NO_EVICT;
r = ttm_bo_validate(&bo->tbo, &bo->placement, false, false);
#define RADEON_RECLOCK_DELAY_MS 200
#define RADEON_WAIT_VBLANK_TIMEOUT 200
+static bool radeon_pm_debug_check_in_vbl(struct radeon_device *rdev, bool finish);
static void radeon_pm_set_clocks_locked(struct radeon_device *rdev);
static void radeon_pm_set_clocks(struct radeon_device *rdev);
static void radeon_pm_idle_work_handler(struct work_struct *work);
rdev->pm.requested_power_state->non_clock_info.pcie_lanes);
}
+static inline void radeon_sync_with_vblank(struct radeon_device *rdev)
+{
+ if (rdev->pm.active_crtcs) {
+ rdev->pm.vblank_sync = false;
+ wait_event_timeout(
+ rdev->irq.vblank_queue, rdev->pm.vblank_sync,
+ msecs_to_jiffies(RADEON_WAIT_VBLANK_TIMEOUT));
+ }
+}
+
static void radeon_set_power_state(struct radeon_device *rdev)
{
/* if *_clock_mode are the same, *_power_state are as well */
rdev->pm.requested_clock_mode->sclk,
rdev->pm.requested_clock_mode->mclk,
rdev->pm.requested_power_state->non_clock_info.pcie_lanes);
+
/* set pcie lanes */
+ /* TODO */
+
/* set voltage */
+ /* TODO */
+
/* set engine clock */
+ radeon_sync_with_vblank(rdev);
+ radeon_pm_debug_check_in_vbl(rdev, false);
radeon_set_engine_clock(rdev, rdev->pm.requested_clock_mode->sclk);
+ radeon_pm_debug_check_in_vbl(rdev, true);
+
+#if 0
/* set memory clock */
+ if (rdev->asic->set_memory_clock) {
+ radeon_sync_with_vblank(rdev);
+ radeon_pm_debug_check_in_vbl(rdev, false);
+ radeon_set_memory_clock(rdev, rdev->pm.requested_clock_mode->mclk);
+ radeon_pm_debug_check_in_vbl(rdev, true);
+ }
+#endif
rdev->pm.current_power_state = rdev->pm.requested_power_state;
rdev->pm.current_clock_mode = rdev->pm.requested_clock_mode;
return 0;
}
+void radeon_pm_fini(struct radeon_device *rdev)
+{
+ if (rdev->pm.i2c_bus)
+ radeon_i2c_destroy(rdev->pm.i2c_bus);
+}
+
void radeon_pm_compute_clocks(struct radeon_device *rdev)
{
struct drm_device *ddev = rdev->ddev;
list_for_each_entry(connector,
&ddev->mode_config.connector_list, head) {
if (connector->encoder &&
- connector->dpms != DRM_MODE_DPMS_OFF) {
+ connector->encoder->crtc &&
+ connector->dpms != DRM_MODE_DPMS_OFF) {
radeon_crtc = to_radeon_crtc(connector->encoder->crtc);
rdev->pm.active_crtcs |= (1 << radeon_crtc->crtc_id);
++count;
break;
}
- /* check if we are in vblank */
- radeon_pm_debug_check_in_vbl(rdev, false);
radeon_set_power_state(rdev);
- radeon_pm_debug_check_in_vbl(rdev, true);
rdev->pm.planned_action = PM_ACTION_NONE;
}
rdev->pm.req_vblank |= (1 << 1);
drm_vblank_get(rdev->ddev, 1);
}
- if (rdev->pm.active_crtcs)
- wait_event_interruptible_timeout(
- rdev->irq.vblank_queue, 0,
- msecs_to_jiffies(RADEON_WAIT_VBLANK_TIMEOUT));
+ radeon_pm_set_clocks_locked(rdev);
if (rdev->pm.req_vblank & (1 << 0)) {
rdev->pm.req_vblank &= ~(1 << 0);
drm_vblank_put(rdev->ddev, 0);
drm_vblank_put(rdev->ddev, 1);
}
- radeon_pm_set_clocks_locked(rdev);
mutex_unlock(&rdev->cp.mutex);
}
# define RADEON_TVPLL_PWRMGT_OFF (1 << 30)
# define RADEON_TVCLK_TURNOFF (1 << 31)
#define RADEON_PLL_PWRMGT_CNTL 0x0015 /* PLL */
+# define RADEON_PM_MODE_SEL (1 << 13)
# define RADEON_TCL_BYPASS_DISABLE (1 << 20)
#define RADEON_CLR_CMP_CLR_3D 0x1a24
#define RADEON_CLR_CMP_CLR_DST 0x15c8
* Jerome Glisse
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "radeon_drm.h"
#include "radeon_reg.h"
#include <drm/drmP.h>
#include <drm/radeon_drm.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "radeon_reg.h"
#include "radeon.h"
0x4000 GB_VAP_RASTER_VTX_FMT_0
0x4004 GB_VAP_RASTER_VTX_FMT_1
0x4008 GB_ENABLE
+0x4010 GB_MSPOS0
+0x4014 GB_MSPOS1
0x401C GB_SELECT
0x4020 GB_AA_CONFIG
0x4024 GB_FIFO_SIZE
0x4000 GB_VAP_RASTER_VTX_FMT_0
0x4004 GB_VAP_RASTER_VTX_FMT_1
0x4008 GB_ENABLE
+0x4010 GB_MSPOS0
+0x4014 GB_MSPOS1
0x401C GB_SELECT
0x4020 GB_AA_CONFIG
0x4024 GB_FIFO_SIZE
0x00028408 VGT_INDX_OFFSET
0x00028AA0 VGT_INSTANCE_STEP_RATE_0
0x00028AA4 VGT_INSTANCE_STEP_RATE_1
-0x000088C0 VGT_LAST_COPY_STATE
0x00028400 VGT_MAX_VTX_INDX
-0x000088D8 VGT_MC_LAT_CNTL
0x00028404 VGT_MIN_VTX_INDX
0x00028A94 VGT_MULTI_PRIM_IB_RESET_EN
0x0002840C VGT_MULTI_PRIM_IB_RESET_INDX
0x00008970 VGT_NUM_INDICES
0x00008974 VGT_NUM_INSTANCES
0x00028A10 VGT_OUTPUT_PATH_CNTL
-0x00028C5C VGT_OUT_DEALLOC_CNTL
0x00028A84 VGT_PRIMITIVEID_EN
0x00008958 VGT_PRIMITIVE_TYPE
0x00028AB4 VGT_REUSE_OFF
-0x00028C58 VGT_VERTEX_REUSE_BLOCK_CNTL
0x00028AB8 VGT_VTX_CNT_EN
0x000088B0 VGT_VTX_VECT_EJECT_REG
0x00028810 PA_CL_CLIP_CNTL
0x00028E00 PA_SU_POLY_OFFSET_FRONT_SCALE
0x00028814 PA_SU_SC_MODE_CNTL
0x00028C08 PA_SU_VTX_CNTL
-0x00008C00 SQ_CONFIG
0x00008C04 SQ_GPR_RESOURCE_MGMT_1
0x00008C08 SQ_GPR_RESOURCE_MGMT_2
0x00008C10 SQ_STACK_RESOURCE_MGMT_1
0x000283FC SQ_VTX_SEMANTIC_31
0x000288E0 SQ_VTX_SEMANTIC_CLEAR
0x0003CFF4 SQ_VTX_START_INST_LOC
-0x0003C000 SQ_TEX_SAMPLER_WORD0_0
-0x0003C004 SQ_TEX_SAMPLER_WORD1_0
-0x0003C008 SQ_TEX_SAMPLER_WORD2_0
-0x00030000 SQ_ALU_CONSTANT0_0
-0x00030004 SQ_ALU_CONSTANT1_0
-0x00030008 SQ_ALU_CONSTANT2_0
-0x0003000C SQ_ALU_CONSTANT3_0
-0x0003E380 SQ_BOOL_CONST_0
-0x0003E384 SQ_BOOL_CONST_1
-0x0003E388 SQ_BOOL_CONST_2
-0x0003E200 SQ_LOOP_CONST_0
-0x0003E200 SQ_LOOP_CONST_DX10_0
0x000281C0 SQ_ALU_CONST_BUFFER_SIZE_GS_0
0x000281C4 SQ_ALU_CONST_BUFFER_SIZE_GS_1
0x000281C8 SQ_ALU_CONST_BUFFER_SIZE_GS_2
0x000281B4 SQ_ALU_CONST_BUFFER_SIZE_VS_13
0x000281B8 SQ_ALU_CONST_BUFFER_SIZE_VS_14
0x000281BC SQ_ALU_CONST_BUFFER_SIZE_VS_15
-0x000289C0 SQ_ALU_CONST_CACHE_GS_0
-0x000289C4 SQ_ALU_CONST_CACHE_GS_1
-0x000289C8 SQ_ALU_CONST_CACHE_GS_2
-0x000289CC SQ_ALU_CONST_CACHE_GS_3
-0x000289D0 SQ_ALU_CONST_CACHE_GS_4
-0x000289D4 SQ_ALU_CONST_CACHE_GS_5
-0x000289D8 SQ_ALU_CONST_CACHE_GS_6
-0x000289DC SQ_ALU_CONST_CACHE_GS_7
-0x000289E0 SQ_ALU_CONST_CACHE_GS_8
-0x000289E4 SQ_ALU_CONST_CACHE_GS_9
-0x000289E8 SQ_ALU_CONST_CACHE_GS_10
-0x000289EC SQ_ALU_CONST_CACHE_GS_11
-0x000289F0 SQ_ALU_CONST_CACHE_GS_12
-0x000289F4 SQ_ALU_CONST_CACHE_GS_13
-0x000289F8 SQ_ALU_CONST_CACHE_GS_14
-0x000289FC SQ_ALU_CONST_CACHE_GS_15
-0x00028940 SQ_ALU_CONST_CACHE_PS_0
-0x00028944 SQ_ALU_CONST_CACHE_PS_1
-0x00028948 SQ_ALU_CONST_CACHE_PS_2
-0x0002894C SQ_ALU_CONST_CACHE_PS_3
-0x00028950 SQ_ALU_CONST_CACHE_PS_4
-0x00028954 SQ_ALU_CONST_CACHE_PS_5
-0x00028958 SQ_ALU_CONST_CACHE_PS_6
-0x0002895C SQ_ALU_CONST_CACHE_PS_7
-0x00028960 SQ_ALU_CONST_CACHE_PS_8
-0x00028964 SQ_ALU_CONST_CACHE_PS_9
-0x00028968 SQ_ALU_CONST_CACHE_PS_10
-0x0002896C SQ_ALU_CONST_CACHE_PS_11
-0x00028970 SQ_ALU_CONST_CACHE_PS_12
-0x00028974 SQ_ALU_CONST_CACHE_PS_13
-0x00028978 SQ_ALU_CONST_CACHE_PS_14
-0x0002897C SQ_ALU_CONST_CACHE_PS_15
-0x00028980 SQ_ALU_CONST_CACHE_VS_0
-0x00028984 SQ_ALU_CONST_CACHE_VS_1
-0x00028988 SQ_ALU_CONST_CACHE_VS_2
-0x0002898C SQ_ALU_CONST_CACHE_VS_3
-0x00028990 SQ_ALU_CONST_CACHE_VS_4
-0x00028994 SQ_ALU_CONST_CACHE_VS_5
-0x00028998 SQ_ALU_CONST_CACHE_VS_6
-0x0002899C SQ_ALU_CONST_CACHE_VS_7
-0x000289A0 SQ_ALU_CONST_CACHE_VS_8
-0x000289A4 SQ_ALU_CONST_CACHE_VS_9
-0x000289A8 SQ_ALU_CONST_CACHE_VS_10
-0x000289AC SQ_ALU_CONST_CACHE_VS_11
-0x000289B0 SQ_ALU_CONST_CACHE_VS_12
-0x000289B4 SQ_ALU_CONST_CACHE_VS_13
-0x000289B8 SQ_ALU_CONST_CACHE_VS_14
-0x000289BC SQ_ALU_CONST_CACHE_VS_15
0x000288D8 SQ_PGM_CF_OFFSET_ES
0x000288DC SQ_PGM_CF_OFFSET_FS
0x000288D4 SQ_PGM_CF_OFFSET_GS
0x00028438 SX_ALPHA_REF
0x00028410 SX_ALPHA_TEST_CONTROL
0x00028350 SX_MISC
-0x0000A020 SMX_DC_CTL0
-0x0000A024 SMX_DC_CTL1
-0x0000A028 SMX_DC_CTL2
-0x00009608 TC_CNTL
0x00009604 TC_INVALIDATE
-0x00009490 TD_CNTL
0x00009400 TD_FILTER4
0x00009404 TD_FILTER4_1
0x00009408 TD_FILTER4_2
0x00028428 CB_FOG_GREEN
0x00028424 CB_FOG_RED
0x00008040 WAIT_UNTIL
-0x00008950 CC_GC_SHADER_PIPE_CONFIG
-0x00008954 GC_USER_SHADER_PIPE_CONFIG
0x00009714 VC_ENHANCE
0x00009830 DB_DEBUG
0x00009838 DB_WATERMARKS
0x00028D28 DB_SRESULTS_COMPARE_STATE0
0x00028D44 DB_ALPHA_TO_MASK
-0x00009504 TA_CNTL
0x00009700 VC_CNTL
-0x00009718 VC_CONFIG
-0x0000A02C SMX_DC_MC_INTF_CTL
0x4000 GB_VAP_RASTER_VTX_FMT_0
0x4004 GB_VAP_RASTER_VTX_FMT_1
0x4008 GB_ENABLE
+0x4010 GB_MSPOS0
+0x4014 GB_MSPOS1
0x401C GB_SELECT
0x4020 GB_AA_CONFIG
0x4024 GB_FIFO_SIZE
0x1DA8 VAP_VPORT_ZSCALE
0x1DAC VAP_VPORT_ZOFFSET
0x2080 VAP_CNTL
+0x208C VAP_INDEX_OFFSET
0x2090 VAP_OUT_VTX_FMT_0
0x2094 VAP_OUT_VTX_FMT_1
0x20B0 VAP_VTE_CNTL
0x4000 GB_VAP_RASTER_VTX_FMT_0
0x4004 GB_VAP_RASTER_VTX_FMT_1
0x4008 GB_ENABLE
+0x4010 GB_MSPOS0
+0x4014 GB_MSPOS1
0x401C GB_SELECT
0x4020 GB_AA_CONFIG
0x4024 GB_FIFO_SIZE
* Jerome Glisse
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <drm/drmP.h>
#include "radeon.h"
+#include "radeon_asic.h"
#include "rs400d.h"
/* This files gather functions specifics to : rs400,rs480 */
void rs400_gart_fini(struct radeon_device *rdev)
{
+ radeon_gart_fini(rdev);
rs400_gart_disable(rdev);
radeon_gart_table_ram_free(rdev);
- radeon_gart_fini(rdev);
}
int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
base = (RREG32(RADEON_NB_TOM) & 0xffff) << 16;
radeon_vram_location(rdev, &rdev->mc, base);
radeon_gtt_location(rdev, &rdev->mc);
+ radeon_update_bandwidth_info(rdev);
}
uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg)
{
int r;
+ r100_set_common_regs(rdev);
+
rs400_mc_program(rdev);
/* Resume clock */
r300_clock_startup(rdev);
void rs400_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
*/
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "atom.h"
#include "rs600d.h"
WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
- tmp |= S_000100_INVALIDATE_ALL_L1_TLBS(1) & S_000100_INVALIDATE_L2_CACHE(1);
+ tmp |= S_000100_INVALIDATE_ALL_L1_TLBS(1) | S_000100_INVALIDATE_L2_CACHE(1);
WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
void rs600_gart_fini(struct radeon_device *rdev)
{
+ radeon_gart_fini(rdev);
rs600_gart_disable(rdev);
radeon_gart_table_vram_free(rdev);
- radeon_gart_fini(rdev);
}
#define R600_PTE_VALID (1 << 0)
/* Vertical blank interrupts */
if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int)) {
drm_handle_vblank(rdev->ddev, 0);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
}
if (G_007EDC_LB_D2_VBLANK_INTERRUPT(r500_disp_int)) {
drm_handle_vblank(rdev->ddev, 1);
+ rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
}
if (G_007EDC_DC_HOT_PLUG_DETECT1_INTERRUPT(r500_disp_int)) {
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
base = RREG32_MC(R_000004_MC_FB_LOCATION);
base = G_000004_MC_FB_START(base) << 16;
+ rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
radeon_gtt_location(rdev, &rdev->mc);
+ radeon_update_bandwidth_info(rdev);
}
void rs600_bandwidth_update(struct radeon_device *rdev)
{
- /* FIXME: implement, should this be like rs690 ? */
+ struct drm_display_mode *mode0 = NULL;
+ struct drm_display_mode *mode1 = NULL;
+ u32 d1mode_priority_a_cnt, d2mode_priority_a_cnt;
+ /* FIXME: implement full support */
+
+ radeon_update_display_priority(rdev);
+
+ if (rdev->mode_info.crtcs[0]->base.enabled)
+ mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+ if (rdev->mode_info.crtcs[1]->base.enabled)
+ mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+
+ rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+ if (rdev->disp_priority == 2) {
+ d1mode_priority_a_cnt = RREG32(R_006548_D1MODE_PRIORITY_A_CNT);
+ d2mode_priority_a_cnt = RREG32(R_006D48_D2MODE_PRIORITY_A_CNT);
+ d1mode_priority_a_cnt |= S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(1);
+ d2mode_priority_a_cnt |= S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(1);
+ WREG32(R_006548_D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+ WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
+ WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+ WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
+ }
}
uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg)
void rs600_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
#define G_00016C_INVALIDATE_L1_TLB(x) (((x) >> 20) & 0x1)
#define C_00016C_INVALIDATE_L1_TLB 0xFFEFFFFF
+#define R_006548_D1MODE_PRIORITY_A_CNT 0x006548
+#define S_006548_D1MODE_PRIORITY_MARK_A(x) (((x) & 0x7FFF) << 0)
+#define G_006548_D1MODE_PRIORITY_MARK_A(x) (((x) >> 0) & 0x7FFF)
+#define C_006548_D1MODE_PRIORITY_MARK_A 0xFFFF8000
+#define S_006548_D1MODE_PRIORITY_A_OFF(x) (((x) & 0x1) << 16)
+#define G_006548_D1MODE_PRIORITY_A_OFF(x) (((x) >> 16) & 0x1)
+#define C_006548_D1MODE_PRIORITY_A_OFF 0xFFFEFFFF
+#define S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_006548_D1MODE_PRIORITY_A_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_006548_D1MODE_PRIORITY_A_ALWAYS_ON 0xFFEFFFFF
+#define S_006548_D1MODE_PRIORITY_A_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_006548_D1MODE_PRIORITY_A_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_006548_D1MODE_PRIORITY_A_FORCE_MASK 0xFEFFFFFF
+#define R_00654C_D1MODE_PRIORITY_B_CNT 0x00654C
+#define S_00654C_D1MODE_PRIORITY_MARK_B(x) (((x) & 0x7FFF) << 0)
+#define G_00654C_D1MODE_PRIORITY_MARK_B(x) (((x) >> 0) & 0x7FFF)
+#define C_00654C_D1MODE_PRIORITY_MARK_B 0xFFFF8000
+#define S_00654C_D1MODE_PRIORITY_B_OFF(x) (((x) & 0x1) << 16)
+#define G_00654C_D1MODE_PRIORITY_B_OFF(x) (((x) >> 16) & 0x1)
+#define C_00654C_D1MODE_PRIORITY_B_OFF 0xFFFEFFFF
+#define S_00654C_D1MODE_PRIORITY_B_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_00654C_D1MODE_PRIORITY_B_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_00654C_D1MODE_PRIORITY_B_ALWAYS_ON 0xFFEFFFFF
+#define S_00654C_D1MODE_PRIORITY_B_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_00654C_D1MODE_PRIORITY_B_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_00654C_D1MODE_PRIORITY_B_FORCE_MASK 0xFEFFFFFF
+#define R_006D48_D2MODE_PRIORITY_A_CNT 0x006D48
+#define S_006D48_D2MODE_PRIORITY_MARK_A(x) (((x) & 0x7FFF) << 0)
+#define G_006D48_D2MODE_PRIORITY_MARK_A(x) (((x) >> 0) & 0x7FFF)
+#define C_006D48_D2MODE_PRIORITY_MARK_A 0xFFFF8000
+#define S_006D48_D2MODE_PRIORITY_A_OFF(x) (((x) & 0x1) << 16)
+#define G_006D48_D2MODE_PRIORITY_A_OFF(x) (((x) >> 16) & 0x1)
+#define C_006D48_D2MODE_PRIORITY_A_OFF 0xFFFEFFFF
+#define S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_006D48_D2MODE_PRIORITY_A_ALWAYS_ON 0xFFEFFFFF
+#define S_006D48_D2MODE_PRIORITY_A_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_006D48_D2MODE_PRIORITY_A_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_006D48_D2MODE_PRIORITY_A_FORCE_MASK 0xFEFFFFFF
+#define R_006D4C_D2MODE_PRIORITY_B_CNT 0x006D4C
+#define S_006D4C_D2MODE_PRIORITY_MARK_B(x) (((x) & 0x7FFF) << 0)
+#define G_006D4C_D2MODE_PRIORITY_MARK_B(x) (((x) >> 0) & 0x7FFF)
+#define C_006D4C_D2MODE_PRIORITY_MARK_B 0xFFFF8000
+#define S_006D4C_D2MODE_PRIORITY_B_OFF(x) (((x) & 0x1) << 16)
+#define G_006D4C_D2MODE_PRIORITY_B_OFF(x) (((x) >> 16) & 0x1)
+#define C_006D4C_D2MODE_PRIORITY_B_OFF 0xFFFEFFFF
+#define S_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON 0xFFEFFFFF
+#define S_006D4C_D2MODE_PRIORITY_B_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_006D4C_D2MODE_PRIORITY_B_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_006D4C_D2MODE_PRIORITY_B_FORCE_MASK 0xFEFFFFFF
+
#endif
*/
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "atom.h"
#include "rs690d.h"
}
}
+union igp_info {
+ struct _ATOM_INTEGRATED_SYSTEM_INFO info;
+ struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 info_v2;
+};
+
void rs690_pm_info(struct radeon_device *rdev)
{
int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
- struct _ATOM_INTEGRATED_SYSTEM_INFO *info;
- struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2;
- void *ptr;
+ union igp_info *info;
uint16_t data_offset;
uint8_t frev, crev;
fixed20_12 tmp;
- atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
- &frev, &crev, &data_offset);
- ptr = rdev->mode_info.atom_context->bios + data_offset;
- info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr;
- info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr;
- /* Get various system informations from bios */
- switch (crev) {
- case 1:
- tmp.full = rfixed_const(100);
- rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock);
- rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
- rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock));
- rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock));
- rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth);
- break;
- case 2:
- tmp.full = rfixed_const(100);
- rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock);
- rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
- rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock);
- rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
- rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq);
- rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
- rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth));
- break;
- default:
+ if (atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
+ &frev, &crev, &data_offset)) {
+ info = (union igp_info *)(rdev->mode_info.atom_context->bios + data_offset);
+
+ /* Get various system informations from bios */
+ switch (crev) {
+ case 1:
+ tmp.full = rfixed_const(100);
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(info->info.ulBootUpMemoryClock);
+ rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+ rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->info.usK8MemoryClock));
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->info.usFSBClock));
+ rdev->pm.igp_ht_link_width.full = rfixed_const(info->info.ucHTLinkWidth);
+ break;
+ case 2:
+ tmp.full = rfixed_const(100);
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(info->info_v2.ulBootUpSidePortClock);
+ rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+ rdev->pm.igp_system_mclk.full = rfixed_const(info->info_v2.ulBootUpUMAClock);
+ rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(info->info_v2.ulHTLinkFreq);
+ rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
+ rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info->info_v2.usMinHTLinkWidth));
+ break;
+ default:
+ tmp.full = rfixed_const(100);
+ /* We assume the slower possible clock ie worst case */
+ /* DDR 333Mhz */
+ rdev->pm.igp_sideport_mclk.full = rfixed_const(333);
+ /* FIXME: system clock ? */
+ rdev->pm.igp_system_mclk.full = rfixed_const(100);
+ rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+ rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
+ rdev->pm.igp_ht_link_width.full = rfixed_const(8);
+ DRM_ERROR("No integrated system info for your GPU, using safe default\n");
+ break;
+ }
+ } else {
tmp.full = rfixed_const(100);
/* We assume the slower possible clock ie worst case */
/* DDR 333Mhz */
rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
rdev->pm.igp_ht_link_width.full = rfixed_const(8);
DRM_ERROR("No integrated system info for your GPU, using safe default\n");
- break;
}
/* Compute various bandwidth */
/* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4 */
void rs690_mc_init(struct radeon_device *rdev)
{
- fixed20_12 a;
u64 base;
rs400_gart_adjust_size(rdev);
base = RREG32_MC(R_000100_MCCFG_FB_LOCATION);
base = G_000100_MC_FB_START(base) << 16;
rs690_pm_info(rdev);
- /* FIXME: we should enforce default clock in case GPU is not in
- * default setup
- */
- a.full = rfixed_const(100);
- rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
- rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
- a.full = rfixed_const(16);
- /* core_bandwidth = sclk(Mhz) * 16 */
- rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev);
radeon_vram_location(rdev, &rdev->mc, base);
radeon_gtt_location(rdev, &rdev->mc);
+ radeon_update_bandwidth_info(rdev);
}
void rs690_line_buffer_adjust(struct radeon_device *rdev,
struct drm_display_mode *mode1 = NULL;
struct rs690_watermark wm0;
struct rs690_watermark wm1;
- u32 tmp;
+ u32 tmp, d1mode_priority_a_cnt, d2mode_priority_a_cnt;
fixed20_12 priority_mark02, priority_mark12, fill_rate;
fixed20_12 a, b;
+ radeon_update_display_priority(rdev);
+
if (rdev->mode_info.crtcs[0]->base.enabled)
mode0 = &rdev->mode_info.crtcs[0]->base.mode;
if (rdev->mode_info.crtcs[1]->base.enabled)
* modes if the user specifies HIGH for displaypriority
* option.
*/
- if (rdev->disp_priority == 2) {
+ if ((rdev->disp_priority == 2) &&
+ ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))) {
tmp = RREG32_MC(R_000104_MC_INIT_MISC_LAT_TIMER);
tmp &= C_000104_MC_DISP0R_INIT_LAT;
tmp &= C_000104_MC_DISP1R_INIT_LAT;
priority_mark12.full = 0;
if (wm1.priority_mark_max.full > priority_mark12.full)
priority_mark12.full = wm1.priority_mark_max.full;
- WREG32(R_006548_D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
- WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
- WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
- WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ d1mode_priority_a_cnt = rfixed_trunc(priority_mark02);
+ d2mode_priority_a_cnt = rfixed_trunc(priority_mark12);
+ if (rdev->disp_priority == 2) {
+ d1mode_priority_a_cnt |= S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(1);
+ d2mode_priority_a_cnt |= S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(1);
+ }
+ WREG32(R_006548_D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+ WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
+ WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+ WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
} else if (mode0) {
if (rfixed_trunc(wm0.dbpp) > 64)
a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
priority_mark02.full = 0;
if (wm0.priority_mark_max.full > priority_mark02.full)
priority_mark02.full = wm0.priority_mark_max.full;
- WREG32(R_006548_D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
- WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ d1mode_priority_a_cnt = rfixed_trunc(priority_mark02);
+ if (rdev->disp_priority == 2)
+ d1mode_priority_a_cnt |= S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(1);
+ WREG32(R_006548_D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+ WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
WREG32(R_006D48_D2MODE_PRIORITY_A_CNT,
S_006D48_D2MODE_PRIORITY_A_OFF(1));
WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT,
priority_mark12.full = 0;
if (wm1.priority_mark_max.full > priority_mark12.full)
priority_mark12.full = wm1.priority_mark_max.full;
+ d2mode_priority_a_cnt = rfixed_trunc(priority_mark12);
+ if (rdev->disp_priority == 2)
+ d2mode_priority_a_cnt |= S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(1);
WREG32(R_006548_D1MODE_PRIORITY_A_CNT,
S_006548_D1MODE_PRIORITY_A_OFF(1));
WREG32(R_00654C_D1MODE_PRIORITY_B_CNT,
S_00654C_D1MODE_PRIORITY_B_OFF(1));
- WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
- WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+ WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
}
}
void rs690_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
#define S_006548_D1MODE_PRIORITY_A_OFF(x) (((x) & 0x1) << 16)
#define G_006548_D1MODE_PRIORITY_A_OFF(x) (((x) >> 16) & 0x1)
#define C_006548_D1MODE_PRIORITY_A_OFF 0xFFFEFFFF
+#define S_006548_D1MODE_PRIORITY_A_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_006548_D1MODE_PRIORITY_A_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_006548_D1MODE_PRIORITY_A_ALWAYS_ON 0xFFEFFFFF
#define S_006548_D1MODE_PRIORITY_A_FORCE_MASK(x) (((x) & 0x1) << 24)
#define G_006548_D1MODE_PRIORITY_A_FORCE_MASK(x) (((x) >> 24) & 0x1)
#define C_006548_D1MODE_PRIORITY_A_FORCE_MASK 0xFEFFFFFF
* Jerome Glisse
*/
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "rv515d.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "atom.h"
#include "rv515_reg_safe.h"
void rv515_mc_init(struct radeon_device *rdev)
{
- fixed20_12 a;
rv515_vram_get_type(rdev);
r100_vram_init_sizes(rdev);
radeon_vram_location(rdev, &rdev->mc, 0);
if (!(rdev->flags & RADEON_IS_AGP))
radeon_gtt_location(rdev, &rdev->mc);
- /* FIXME: we should enforce default clock in case GPU is not in
- * default setup
- */
- a.full = rfixed_const(100);
- rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
- rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ radeon_update_bandwidth_info(rdev);
}
uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
void rv515_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r100_cp_fini(rdev);
r100_wb_fini(rdev);
r100_ib_fini(rdev);
struct drm_display_mode *mode1 = NULL;
struct rv515_watermark wm0;
struct rv515_watermark wm1;
- u32 tmp;
+ u32 tmp, d1mode_priority_a_cnt, d2mode_priority_a_cnt;
fixed20_12 priority_mark02, priority_mark12, fill_rate;
fixed20_12 a, b;
priority_mark12.full = 0;
if (wm1.priority_mark_max.full > priority_mark12.full)
priority_mark12.full = wm1.priority_mark_max.full;
- WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
- WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
- WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
- WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ d1mode_priority_a_cnt = rfixed_trunc(priority_mark02);
+ d2mode_priority_a_cnt = rfixed_trunc(priority_mark12);
+ if (rdev->disp_priority == 2) {
+ d1mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
+ d2mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
+ }
+ WREG32(D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+ WREG32(D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
+ WREG32(D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+ WREG32(D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
} else if (mode0) {
if (rfixed_trunc(wm0.dbpp) > 64)
a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
priority_mark02.full = 0;
if (wm0.priority_mark_max.full > priority_mark02.full)
priority_mark02.full = wm0.priority_mark_max.full;
- WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
- WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ d1mode_priority_a_cnt = rfixed_trunc(priority_mark02);
+ if (rdev->disp_priority == 2)
+ d1mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
+ WREG32(D1MODE_PRIORITY_A_CNT, d1mode_priority_a_cnt);
+ WREG32(D1MODE_PRIORITY_B_CNT, d1mode_priority_a_cnt);
WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
} else {
priority_mark12.full = 0;
if (wm1.priority_mark_max.full > priority_mark12.full)
priority_mark12.full = wm1.priority_mark_max.full;
+ d2mode_priority_a_cnt = rfixed_trunc(priority_mark12);
+ if (rdev->disp_priority == 2)
+ d2mode_priority_a_cnt |= MODE_PRIORITY_ALWAYS_ON;
WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
- WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
- WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ WREG32(D2MODE_PRIORITY_A_CNT, d2mode_priority_a_cnt);
+ WREG32(D2MODE_PRIORITY_B_CNT, d2mode_priority_a_cnt);
}
}
struct drm_display_mode *mode0 = NULL;
struct drm_display_mode *mode1 = NULL;
+ radeon_update_display_priority(rdev);
+
if (rdev->mode_info.crtcs[0]->base.enabled)
mode0 = &rdev->mode_info.crtcs[0]->base.mode;
if (rdev->mode_info.crtcs[1]->base.enabled)
* modes if the user specifies HIGH for displaypriority
* option.
*/
- if (rdev->disp_priority == 2) {
+ if ((rdev->disp_priority == 2) &&
+ (rdev->family == CHIP_RV515)) {
tmp = RREG32_MC(MC_MISC_LAT_TIMER);
tmp &= ~MC_DISP1R_INIT_LAT_MASK;
tmp &= ~MC_DISP0R_INIT_LAT_MASK;
*/
#include <linux/firmware.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "radeon_drm.h"
#include "rv770d.h"
#include "atom.h"
void rv770_pcie_gart_fini(struct radeon_device *rdev)
{
+ radeon_gart_fini(rdev);
rv770_pcie_gart_disable(rdev);
radeon_gart_table_vram_free(rdev);
- radeon_gart_fini(rdev);
}
WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CC_GC_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
+ WREG32(GC_USER_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
WREG32(CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
WREG32(CGTS_SYS_TCC_DISABLE, 0);
WREG32(CGTS_TCC_DISABLE, 0);
+ WREG32(CGTS_USER_SYS_TCC_DISABLE, 0);
+ WREG32(CGTS_USER_TCC_DISABLE, 0);
num_qd_pipes =
R7XX_MAX_PIPES - r600_count_pipe_bits((cc_gc_shader_pipe_config & INACTIVE_QD_PIPES_MASK) >> 8);
int rv770_mc_init(struct radeon_device *rdev)
{
- fixed20_12 a;
u32 tmp;
int chansize, numchan;
rdev->mc.real_vram_size = rdev->mc.aper_size;
}
r600_vram_gtt_location(rdev, &rdev->mc);
- /* FIXME: we should enforce default clock in case GPU is not in
- * default setup
- */
- a.full = rfixed_const(100);
- rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
- rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+ radeon_update_bandwidth_info(rdev);
+
return 0;
}
DRM_ERROR("radeon: failled testing IB (%d).\n", r);
return r;
}
+
+ r = r600_audio_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "radeon: audio init failed\n");
+ return r;
+ }
+
return r;
}
{
int r;
+ r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
r700_cp_stop(rdev);
rdev->cp.ready = false;
}
}
}
+
+ r = r600_audio_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "radeon: audio init failed\n");
+ return r;
+ }
+
return 0;
}
void rv770_fini(struct radeon_device *rdev)
{
+ radeon_pm_fini(rdev);
r600_blit_fini(rdev);
r600_cp_fini(rdev);
r600_wb_fini(rdev);
#include "ttm/ttm_placement.h"
#include <linux/agp_backend.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <asm/agp.h>
atomic_set(&glob->bo_count, 0);
- kobject_init(&glob->kobj, &ttm_bo_glob_kobj_type);
- ret = kobject_add(&glob->kobj, ttm_get_kobj(), "buffer_objects");
+ ret = kobject_init_and_add(
+ &glob->kobj, &ttm_bo_glob_kobj_type, ttm_get_kobj(), "buffer_objects");
if (unlikely(ret != 0))
kobject_put(&glob->kobj);
return ret;
}
EXPORT_SYMBOL(ttm_bo_wait);
-void ttm_bo_unblock_reservation(struct ttm_buffer_object *bo)
-{
- atomic_set(&bo->reserved, 0);
- wake_up_all(&bo->event_queue);
-}
-
-int ttm_bo_block_reservation(struct ttm_buffer_object *bo, bool interruptible,
- bool no_wait)
-{
- int ret;
-
- while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) {
- if (no_wait)
- return -EBUSY;
- else if (interruptible) {
- ret = wait_event_interruptible
- (bo->event_queue, atomic_read(&bo->reserved) == 0);
- if (unlikely(ret != 0))
- return ret;
- } else {
- wait_event(bo->event_queue,
- atomic_read(&bo->reserved) == 0);
- }
- }
- return 0;
-}
-
int ttm_bo_synccpu_write_grab(struct ttm_buffer_object *bo, bool no_wait)
{
int ret = 0;
/*
- * Using ttm_bo_reserve instead of ttm_bo_block_reservation
- * makes sure the lru lists are updated.
+ * Using ttm_bo_reserve makes sure the lru lists are updated.
*/
ret = ttm_bo_reserve(bo, true, no_wait, false, 0);
#include <linux/io.h>
#include <linux/highmem.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
lock->flags &= ~TTM_VT_LOCK;
wake_up_all(&lock->queue);
spin_unlock(&lock->lock);
- printk(KERN_INFO TTM_PFX "vt unlock.\n");
return ret;
}
ttm_lock_type, &ttm_vt_lock_remove, NULL);
if (ret)
(void)__ttm_vt_unlock(lock);
- else {
+ else
lock->vt_holder = tfile;
- printk(KERN_INFO TTM_PFX "vt lock.\n");
- }
return ret;
}
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/slab.h>
#define TTM_MEMORY_ALLOC_RETRIES 4
zone->used_mem = 0;
zone->glob = glob;
glob->zone_kernel = zone;
- kobject_init(&zone->kobj, &ttm_mem_zone_kobj_type);
- ret = kobject_add(&zone->kobj, &glob->kobj, zone->name);
+ ret = kobject_init_and_add(
+ &zone->kobj, &ttm_mem_zone_kobj_type, &glob->kobj, zone->name);
if (unlikely(ret != 0)) {
kobject_put(&zone->kobj);
return ret;
zone->used_mem = 0;
zone->glob = glob;
glob->zone_highmem = zone;
- kobject_init(&zone->kobj, &ttm_mem_zone_kobj_type);
- ret = kobject_add(&zone->kobj, &glob->kobj, zone->name);
+ ret = kobject_init_and_add(
+ &zone->kobj, &ttm_mem_zone_kobj_type, &glob->kobj, zone->name);
if (unlikely(ret != 0)) {
kobject_put(&zone->kobj);
return ret;
zone->used_mem = 0;
zone->glob = glob;
glob->zone_dma32 = zone;
- kobject_init(&zone->kobj, &ttm_mem_zone_kobj_type);
- ret = kobject_add(&zone->kobj, &glob->kobj, zone->name);
+ ret = kobject_init_and_add(
+ &zone->kobj, &ttm_mem_zone_kobj_type, &glob->kobj, zone->name);
if (unlikely(ret != 0)) {
kobject_put(&zone->kobj);
return ret;
glob->swap_queue = create_singlethread_workqueue("ttm_swap");
INIT_WORK(&glob->work, ttm_shrink_work);
init_waitqueue_head(&glob->queue);
- kobject_init(&glob->kobj, &ttm_mem_glob_kobj_type);
- ret = kobject_add(&glob->kobj,
- ttm_get_kobj(),
- "memory_accounting");
+ ret = kobject_init_and_add(
+ &glob->kobj, &ttm_mem_glob_kobj_type, ttm_get_kobj(), "memory_accounting");
if (unlikely(ret != 0)) {
kobject_put(&glob->kobj);
return ret;
* Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
*/
-#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/swap.h>
+#include <linux/slab.h>
#include "drm_cache.h"
+#include "drm_mem_util.h"
#include "ttm/ttm_module.h"
#include "ttm/ttm_bo_driver.h"
#include "ttm/ttm_placement.h"
/**
* Allocates storage for pointers to the pages that back the ttm.
- *
- * Uses kmalloc if possible. Otherwise falls back to vmalloc.
*/
static void ttm_tt_alloc_page_directory(struct ttm_tt *ttm)
{
- unsigned long size = ttm->num_pages * sizeof(*ttm->pages);
- ttm->pages = NULL;
-
- if (size <= PAGE_SIZE)
- ttm->pages = kzalloc(size, GFP_KERNEL);
-
- if (!ttm->pages) {
- ttm->pages = vmalloc_user(size);
- if (ttm->pages)
- ttm->page_flags |= TTM_PAGE_FLAG_VMALLOC;
- }
+ ttm->pages = drm_calloc_large(ttm->num_pages, sizeof(*ttm->pages));
}
static void ttm_tt_free_page_directory(struct ttm_tt *ttm)
{
- if (ttm->page_flags & TTM_PAGE_FLAG_VMALLOC) {
- vfree(ttm->pages);
- ttm->page_flags &= ~TTM_PAGE_FLAG_VMALLOC;
- } else {
- kfree(ttm->pages);
- }
+ drm_free_large(ttm->pages);
ttm->pages = NULL;
}
#include "via_dmablit.h"
#include <linux/pagemap.h>
+#include <linux/slab.h>
#define VIA_PGDN(x) (((unsigned long)(x)) & PAGE_MASK)
#define VIA_PGOFF(x) (((unsigned long)(x)) & ~PAGE_MASK)
DRM_DEBUG("\n");
- if (fx->lock > VIA_NR_XVMC_LOCKS)
+ if (fx->lock >= VIA_NR_XVMC_LOCKS)
return -EFAULT;
lock = (volatile int *)XVMCLOCKPTR(sAPriv, fx->lock);
config DRM_VMWGFX
tristate "DRM driver for VMware Virtual GPU"
- depends on DRM && PCI
+ depends on DRM && PCI && FB
select FB_DEFERRED_IO
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
mutex_lock(&vgasr_mutex);
- if (!vgasr_priv.active)
- return -EINVAL;
+ if (!vgasr_priv.active) {
+ cnt = -EINVAL;
+ goto out;
+ }
/* pwr off the device not in use */
if (strncmp(usercmd, "OFF", 3) == 0) {
#include <linux/spinlock.h>
#include <linux/poll.h>
#include <linux/miscdevice.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
#include <linux/input.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "hid-ids.h"
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "hid-ids.h"
static const struct hid_device_id ch_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ }
};
MODULE_DEVICE_TABLE(hid, ch_devices);
if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_report_event)
hid->hiddev_report_event(hid, report);
- if (hid->claimed & HID_CLAIMED_HIDRAW) {
- /* numbered reports need to be passed with the report num */
- if (report_enum->numbered)
- hidraw_report_event(hid, data - 1, size + 1);
- else
- hidraw_report_event(hid, data, size);
- }
+ if (hid->claimed & HID_CLAIMED_HIDRAW)
+ hidraw_report_event(hid, data, size);
for (a = 0; a < report->maxfield; a++)
hid_input_field(hid, report->field[a], cdata, interrupt);
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/poll.h>
*/
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
*/
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "hid-ids.h"
static int gyration_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
- struct input_dev *input = field->hidinput->input;
+
+ if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput)
+ return 0;
if ((usage->hid & HID_USAGE_PAGE) == HID_UP_GENDESK &&
(usage->hid & 0xff) == 0x82) {
+ struct input_dev *input = field->hidinput->input;
input_event(input, usage->type, usage->code, 1);
input_sync(input);
input_event(input, usage->type, usage->code, 0);
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
+#define USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR 0x0027
#define USB_VENDOR_ID_CHIC 0x05fe
#define USB_DEVICE_ID_CHIC_GAMEPAD 0x0014
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "hid-ids.h"
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "usbhid/usbhid.h"
/*
* HID driver for N-Trig touchscreens
*
- * Copyright (c) 2008 Rafi Rubin
- * Copyright (c) 2009 Stephane Chatty
+ * Copyright (c) 2008-2010 Rafi Rubin
+ * Copyright (c) 2009-2010 Stephane Chatty
*
*/
#include <linux/device.h>
#include <linux/hid.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
#include <linux/module.h>
+#include <linux/slab.h>
#include "hid-ids.h"
#define NTRIG_DUPLICATE_USAGES 0x001
-#define nt_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \
- EV_KEY, (c))
-
struct ntrig_data {
/* Incoming raw values for a single contact */
__u16 x, y, w, h;
__u16 id;
- __u8 confidence;
+
+ bool tipswitch;
+ bool confidence;
+ bool first_contact_touch;
bool reading_mt;
- __u8 first_contact_confidence;
__u8 mt_footer[4];
__u8 mt_foot_count;
case 0xff000001:
/* Tag indicating the start of a multitouch group */
nd->reading_mt = 1;
- nd->first_contact_confidence = 0;
+ nd->first_contact_touch = 0;
break;
case HID_DG_TIPSWITCH:
+ nd->tipswitch = value;
/* Prevent emission of touch until validated */
return 1;
case HID_DG_CONFIDENCE:
* to emit a normal (X, Y) position
*/
if (!nd->reading_mt) {
+ /*
+ * TipSwitch indicates the presence of a
+ * finger in single touch mode.
+ */
+ input_report_key(input, BTN_TOUCH,
+ nd->tipswitch);
input_report_key(input, BTN_TOOL_DOUBLETAP,
- (nd->confidence != 0));
+ nd->tipswitch);
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
/* emit a normal (X, Y) for the first point only */
if (nd->id == 0) {
- nd->first_contact_confidence = nd->confidence;
+ /*
+ * TipSwitch is superfluous in multitouch
+ * mode. The footer events tell us
+ * if there is a finger on the screen or
+ * not.
+ */
+ nd->first_contact_touch = nd->confidence;
input_event(input, EV_ABS, ABS_X, nd->x);
input_event(input, EV_ABS, ABS_Y, nd->y);
}
nd->reading_mt = 0;
- if (nd->first_contact_confidence) {
- switch (value) {
- case 0: /* for single touch devices */
- case 1:
- input_report_key(input,
- BTN_TOOL_DOUBLETAP, 1);
- break;
- case 2:
- input_report_key(input,
- BTN_TOOL_TRIPLETAP, 1);
- break;
- case 3:
- default:
- input_report_key(input,
- BTN_TOOL_QUADTAP, 1);
- }
+ if (nd->first_contact_touch) {
+ input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
input_report_key(input, BTN_TOUCH, 1);
} else {
- input_report_key(input,
- BTN_TOOL_DOUBLETAP, 0);
- input_report_key(input,
- BTN_TOOL_TRIPLETAP, 0);
- input_report_key(input,
- BTN_TOOL_QUADTAP, 0);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
input_report_key(input, BTN_TOUCH, 0);
}
break;
struct ntrig_data *nd;
struct hid_input *hidinput;
struct input_dev *input;
+ struct hid_report *report;
if (id->driver_data)
hdev->quirks |= HID_QUIRK_MULTI_INPUT;
__clear_bit(BTN_TOOL_PEN, input->keybit);
__clear_bit(BTN_TOOL_FINGER, input->keybit);
__clear_bit(BTN_0, input->keybit);
- /*
- * A little something special to enable
- * two and three finger taps.
- */
__set_bit(BTN_TOOL_DOUBLETAP, input->keybit);
- __set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
- __set_bit(BTN_TOOL_QUADTAP, input->keybit);
/*
* The physical touchscreen (single touch)
* input has a value for physical, whereas
}
}
+ /* This is needed for devices with more recent firmware versions */
+ report = hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[0x0a];
+ if (report)
+ usbhid_submit_report(hdev, report, USB_DIR_OUT);
+
+
return 0;
err_free:
kfree(nd);
#define debug(format, arg...) pr_debug("hid-plff: " format "\n" , ## arg)
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("Quanta dual-touch panel");
/* #define DEBUG */
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
#include "hid-ids.h"
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "hid-ids.h"
static int sony_set_operational_bt(struct hid_device *hdev)
{
- unsigned char buf[] = { 0x53, 0xf4, 0x42, 0x03, 0x00, 0x00 };
+ unsigned char buf[] = { 0xf4, 0x42, 0x03, 0x00, 0x00 };
return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
}
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
MODULE_DESCRIPTION("Stantum HID multitouch panels");
#include <linux/hid.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "hid-ids.h"
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "hid-ids.h"
ret = hid_register_driver(&wacom_driver);
if (ret)
printk(KERN_ERR "can't register wacom driver\n");
- printk(KERN_ERR "wacom driver registered\n");
return ret;
}
#include <linux/hid.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "hid-ids.h"
#include <linux/poll.h>
#include <linux/device.h>
#include <linux/major.h>
+#include <linux/slab.h>
#include <linux/hid.h>
#include <linux/mutex.h>
#include <linux/sched.h>
}
}
- init_waitqueue_head(&usbhid->wait);
- INIT_WORK(&usbhid->reset_work, hid_reset);
- INIT_WORK(&usbhid->restart_work, __usbhid_restart_queues);
- setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
-
- spin_lock_init(&usbhid->lock);
-
usbhid->urbctrl = usb_alloc_urb(0, GFP_KERNEL);
if (!usbhid->urbctrl) {
ret = -ENOMEM;
usbhid->intf = intf;
usbhid->ifnum = interface->desc.bInterfaceNumber;
+ init_waitqueue_head(&usbhid->wait);
+ INIT_WORK(&usbhid->reset_work, hid_reset);
+ INIT_WORK(&usbhid->restart_work, __usbhid_restart_queues);
+ setup_timer(&usbhid->io_retry, hid_retry_timeout, (unsigned long) hid);
+ spin_lock_init(&usbhid->lock);
+
ret = hid_add_device(hid);
if (ret) {
if (ret != -ENODEV)
#define debug(format, arg...) pr_debug("hid-pidff: " format "\n" , ## arg)
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/hid.h>
*/
#include <linux/hid.h>
+#include <linux/slab.h>
#include "../hid-ids.h"
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
depends on HWMON && I2C
help
If you say yes here you get support for the aSC7621
- family of SMBus sensors chip found on most Intel X48, X38, 975,
- 965 and 945 desktop boards. Currently supported chips:
+ family of SMBus sensors chip found on most Intel X38, X48, X58,
+ 945, 965 and 975 desktop boards. Currently supported chips:
aSC7621
aSC7621a
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
/* AD7414 registers */
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "lm75.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/slab.h>
#define ADT7411_REG_INT_TEMP_VDD_LSB 0x03
#define ADT7411_REG_EXT_TEMP_AIN14_LSB 0x04
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/log2.h>
+#include <linux/slab.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x58, 0x5C, I2C_CLIENT_END };
#include <linux/delay.h>
#include <linux/log2.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
"TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
"TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
NULL },
+/* Set 17: iMac 9,1 */
+ { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
+ "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
+/* Set 18: MacBook Pro 2,2 */
+ { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
+ "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
};
/* List of keys used to read/write fan speeds */
{ .accelerometer = 1, .light = 1, .temperature_set = 15 },
/* MacPro3,1: temperature set 16 */
{ .accelerometer = 0, .light = 0, .temperature_set = 16 },
+/* iMac 9,1: light sensor only, temperature set 17 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 17 },
+/* MacBook Pro 2,2: accelerometer, backlight and temperature set 18 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 18 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
&applesmc_dmi_data[9]},
+ { applesmc_dmi_match, "Apple MacBook Pro 2,2", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
+ &applesmc_dmi_data[18]},
{ applesmc_dmi_match, "Apple MacBook Pro", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple iMac 9,1", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
+ &applesmc_dmi_data[17]},
{ applesmc_dmi_match, "Apple iMac 8", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
#include <linux/hwmon.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <acpi/acpi.h>
#include <acpi/acpixf.h>
int err;
list_for_each_entry(s, &data->sensor_list, list) {
+ sysfs_attr_init(&s->input_attr.attr);
err = device_create_file(data->hwmon_dev, &s->input_attr);
if (err)
return err;
+ sysfs_attr_init(&s->label_attr.attr);
err = device_create_file(data->hwmon_dev, &s->label_attr);
if (err)
return err;
+ sysfs_attr_init(&s->limit1_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit1_attr);
if (err)
return err;
+ sysfs_attr_init(&s->limit2_attr.attr);
err = device_create_file(data->hwmon_dev, &s->limit2_attr);
if (err)
return err;
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("System voltages control via Attansic ATXP1");
if (err) {
dev_warn(dev,
"Unable to access MSR 0xEE, for Tjmax, left"
- " at default");
+ " at default\n");
} else if (eax & 0x40000000) {
tjmax = tjmax_ee;
}
family 6 CPU */
if ((c->x86 == 0x6) && (c->x86_model > 0xf))
printk(KERN_WARNING DRVNAME ": Unknown CPU "
- "model %x\n", c->x86_model);
+ "model 0x%x\n", c->x86_model);
continue;
}
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/f75375s.h>
+#include <linux/slab.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
+ AXIS_DMI_MATCH("HPB432x", "HP ProBook 432", xy_rotated_left),
+ AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
+ AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
+ AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
#include <linux/log2.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#define DRVNAME "i5k_amb"
#include <linux/kdev_t.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/math64.h>
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#define REFRESH_INTERVAL (2 * HZ)
#define DRVNAME "ibmpex"
struct it87_data *data = dev_get_drvdata(dev);
long val;
+ u8 reg;
if (strict_strtol(buf, 10, &val) < 0)
return -EINVAL;
- mutex_lock(&data->update_lock);
-
- data->sensor &= ~(1 << nr);
- data->sensor &= ~(8 << nr);
+ reg = it87_read_value(data, IT87_REG_TEMP_ENABLE);
+ reg &= ~(1 << nr);
+ reg &= ~(8 << nr);
if (val == 2) { /* backwards compatibility */
dev_warn(dev, "Sensor type 2 is deprecated, please use 4 "
"instead\n");
}
/* 3 = thermal diode; 4 = thermistor; 0 = disabled */
if (val == 3)
- data->sensor |= 1 << nr;
+ reg |= 1 << nr;
else if (val == 4)
- data->sensor |= 8 << nr;
- else if (val != 0) {
- mutex_unlock(&data->update_lock);
+ reg |= 8 << nr;
+ else if (val != 0)
return -EINVAL;
- }
+
+ mutex_lock(&data->update_lock);
+ data->sensor = reg;
it87_write_value(data, IT87_REG_TEMP_ENABLE, data->sensor);
+ data->valid = 0; /* Force cache refresh */
mutex_unlock(&data->update_lock);
return count;
}
it87_write_value(data, IT87_REG_TEMP_HIGH(i), 127);
}
- /* Check if temperature channels are reset manually or by some reason */
- tmp = it87_read_value(data, IT87_REG_TEMP_ENABLE);
- if ((tmp & 0x3f) == 0) {
- /* Temp1,Temp3=thermistor; Temp2=thermal diode */
- tmp = (tmp & 0xc0) | 0x2a;
- it87_write_value(data, IT87_REG_TEMP_ENABLE, tmp);
- }
- data->sensor = tmp;
+ /* Temperature channels are not forcibly enabled, as they can be
+ * set to two different sensor types and we can't guess which one
+ * is correct for a given system. These channels can be enabled at
+ * run-time through the temp{1-3}_type sysfs accessors if needed. */
/* Check if voltage monitors are reset manually or by some reason */
tmp = it87_read_value(data, IT87_REG_VIN_ENABLE);
#include <linux/mutex.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#define DRVNAME "lm70"
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#define MAX1111_TX_BUF_SIZE 1
#define MAX1111_RX_BUF_SIZE 2
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/hwmon.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/err.h>
#include <linux/sht15.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#define SHT15_MEASURE_TEMP 3
**/
static inline int sht15_calc_temp(struct sht15_data *data)
{
- int d1 = 0;
+ int d1 = temppoints[0].d1;
int i;
- for (i = 1; i < ARRAY_SIZE(temppoints); i++)
+ for (i = ARRAY_SIZE(temppoints) - 1; i > 0; i--)
/* Find pointer to interpolate */
if (data->supply_uV > temppoints[i - 1].vdd) {
- d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+ d1 = (data->supply_uV - temppoints[i - 1].vdd)
* (temppoints[i].d1 - temppoints[i - 1].d1)
/ (temppoints[i].vdd - temppoints[i - 1].vdd)
+ temppoints[i - 1].d1;
/* If a regulator is available, query what the supply voltage actually is!*/
data->reg = regulator_get(data->dev, "vcc");
if (!IS_ERR(data->reg)) {
- data->supply_uV = regulator_get_voltage(data->reg);
+ int voltage;
+
+ voltage = regulator_get_voltage(data->reg);
+ if (voltage)
+ data->supply_uV = voltage;
+
regulator_enable(data->reg);
/* setup a notifier block to update this if another device
* causes the voltage to change */
static ssize_t watchdog_write(struct file *filp, const char __user *buf,
size_t count, loff_t *offset)
{
- size_t ret;
+ ssize_t ret;
struct w83793_data *data = filp->private_data;
if (count) {
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/auxadc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
/*
* Registers offset
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <asm/gpio.h>
#include <linux/completion.h>
#include <linux/io.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#define SMCR 0x00
#define SMCR_START (1 << 0)
#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
"<%s> I2C Interrupted\n", __func__);
return -EINTR;
}
- if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+ if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> I2C bus is busy\n", __func__);
- return -EIO;
+ return -ETIMEDOUT;
}
schedule();
}
result = i2c_imx_read(i2c_imx, &msgs[i]);
else
result = i2c_imx_write(i2c_imx, &msgs[i]);
+ if (result)
+ goto fail0;
}
fail0:
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/slab.h>
#include <mach/hardware.h> /* Pick up IXP2000-specific bits */
#include <mach/gpio.h>
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/of_i2c.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
* or implied.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/i2c-ocores.h>
+#include <linux/slab.h>
#include <asm/io.h>
struct ocores_i2c {
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/io.h>
/**
* octeon_i2c_setclock - Calculate and set clock divisors.
*/
-static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_setclock(struct octeon_i2c *i2c)
{
int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
return 0;
}
-static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+static int __devinit octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
{
u8 status;
int tries;
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
/* I2C controller revisions */
#define OMAP_I2C_REV_2 0x20
platform_set_drvdata(pdev, dev);
+ if (cpu_is_omap7xx())
+ dev->reg_shift = 1;
+ else
+ dev->reg_shift = 2;
+
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_iounmap;
dev->b_hw = 1; /* Enable hardware fixes */
}
- if (cpu_is_omap7xx())
- dev->reg_shift = 1;
- else
- dev->reg_shift = 2;
-
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-smbus.h>
+#include <linux/slab.h>
#include "i2c-parport.h"
/* ----- Device list ------------------------------------------------------ */
#include <linux/sched.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
static struct pci_driver pasemi_smb_driver;
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
/* We still have something to talk about... */
val = *alg_data->mif.buf++;
+ if (alg_data->mif.len == 1)
+ val |= stop_bit;
+
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
__func__);
if (alg_data->mif.len == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
/*
* Enable interrupt RFDAIE (data in Rx fifo),
* and disable DRMIE (need data for Tx)
*/
tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+ if (tmp > 0x3FF)
+ tmp = 0x3FF;
iowrite32(tmp, I2C_REG_CKH(alg_data));
iowrite32(tmp, I2C_REG_CKL(alg_data));
#include <linux/platform_device.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/io.h>
u8 cap_info:1;
u8 cap_read:1;
u8 cap_write:1;
+ struct smbus_methods_t *methods;
};
static const struct smbus_methods_t smbus_methods = {
.mt_sbw = "_SBW",
};
+/* Some IBM BIOSes omit the leading underscore */
+static const struct smbus_methods_t ibm_smbus_methods = {
+ .mt_info = "SBI_",
+ .mt_sbr = "SBR_",
+ .mt_sbw = "SBW_",
+};
+
static const struct acpi_device_id acpi_smbus_cmi_ids[] = {
- {"SMBUS01", 0},
+ {"SMBUS01", (kernel_ulong_t)&smbus_methods},
+ {ACPI_SMBUS_IBM_HID, (kernel_ulong_t)&ibm_smbus_methods},
{"", 0}
};
+MODULE_DEVICE_TABLE(acpi, acpi_smbus_cmi_ids);
#define ACPI_SMBUS_STATUS_OK 0x00
#define ACPI_SMBUS_STATUS_FAIL 0x07
if (read_write == I2C_SMBUS_READ) {
protocol |= ACPI_SMBUS_PRTCL_READ;
- method = smbus_methods.mt_sbr;
+ method = smbus_cmi->methods->mt_sbr;
input.count = 3;
} else {
protocol |= ACPI_SMBUS_PRTCL_WRITE;
- method = smbus_methods.mt_sbw;
+ method = smbus_cmi->methods->mt_sbw;
input.count = 5;
}
union acpi_object *obj;
acpi_status status;
- if (!strcmp(name, smbus_methods.mt_info)) {
+ if (!strcmp(name, smbus_cmi->methods->mt_info)) {
status = acpi_evaluate_object(smbus_cmi->handle,
- smbus_methods.mt_info,
+ smbus_cmi->methods->mt_info,
NULL, &buffer);
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Evaluating %s: %i",
- smbus_methods.mt_info, status));
+ smbus_cmi->methods->mt_info, status));
return -EIO;
}
kfree(buffer.pointer);
smbus_cmi->cap_info = 1;
- } else if (!strcmp(name, smbus_methods.mt_sbr))
+ } else if (!strcmp(name, smbus_cmi->methods->mt_sbr))
smbus_cmi->cap_read = 1;
- else if (!strcmp(name, smbus_methods.mt_sbw))
+ else if (!strcmp(name, smbus_cmi->methods->mt_sbw))
smbus_cmi->cap_write = 1;
else
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unsupported CMI method: %s\n",
static int acpi_smbus_cmi_add(struct acpi_device *device)
{
struct acpi_smbus_cmi *smbus_cmi;
+ const struct acpi_device_id *id;
smbus_cmi = kzalloc(sizeof(struct acpi_smbus_cmi), GFP_KERNEL);
if (!smbus_cmi)
smbus_cmi->cap_read = 0;
smbus_cmi->cap_write = 0;
+ for (id = acpi_smbus_cmi_ids; id->id[0]; id++)
+ if (!strcmp(id->id, acpi_device_hid(device)))
+ smbus_cmi->methods =
+ (struct smbus_methods_t *) id->driver_data;
+
acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
/* Transmit operation: */
/* */
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
/* the name of this kernel module */
#define NAME "stu300"
int i = 0;
/* Locate the apropriate clock setting */
- while (i < ARRAY_SIZE(stu300_clktable) &&
+ while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
stu300_clktable[i].rate < clkrate)
i++;
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
/* include interfaces to usb layer */
#include <linux/i2c-algo-bit.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/wait.h>
#include <linux/i2c-xiic.h>
#include <linux/io.h>
+#include <linux/slab.h>
#define DRIVER_NAME "xiic-i2c"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/scx200.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/rwsem.h>
#include "i2c-core.h"
#include "i2c-core.h"
-/* core_lock protects i2c_adapter_idr, userspace_devices, and guarantees
+/* core_lock protects i2c_adapter_idr, and guarantees
that device detection, deletion of detected devices, and attach_adapter
and detach_adapter calls are serialized */
static DEFINE_MUTEX(core_lock);
static DEFINE_IDR(i2c_adapter_idr);
-static LIST_HEAD(userspace_devices);
static struct device_type i2c_client_type;
static int i2c_check_addr(struct i2c_adapter *adapter, int addr);
dev_dbg(dev, "probe\n");
status = driver->probe(client, i2c_match_id(driver->id_table, client));
- if (status)
+ if (status) {
client->driver = NULL;
+ i2c_set_clientdata(client, NULL);
+ }
return status;
}
dev->driver = NULL;
status = 0;
}
- if (status == 0)
+ if (status == 0) {
client->driver = NULL;
+ i2c_set_clientdata(client, NULL);
+ }
return status;
}
return -EEXIST;
/* Keep track of the added device */
- mutex_lock(&core_lock);
- list_add_tail(&client->detected, &userspace_devices);
- mutex_unlock(&core_lock);
+ i2c_lock_adapter(adap);
+ list_add_tail(&client->detected, &adap->userspace_clients);
+ i2c_unlock_adapter(adap);
dev_info(dev, "%s: Instantiated device %s at 0x%02hx\n", "new_device",
info.type, info.addr);
/* Make sure the device was added through sysfs */
res = -ENOENT;
- mutex_lock(&core_lock);
- list_for_each_entry_safe(client, next, &userspace_devices, detected) {
- if (client->addr == addr && client->adapter == adap) {
+ i2c_lock_adapter(adap);
+ list_for_each_entry_safe(client, next, &adap->userspace_clients,
+ detected) {
+ if (client->addr == addr) {
dev_info(dev, "%s: Deleting device %s at 0x%02hx\n",
"delete_device", client->name, client->addr);
break;
}
}
- mutex_unlock(&core_lock);
+ i2c_unlock_adapter(adap);
if (res < 0)
dev_err(dev, "%s: Can't find device in list\n",
}
rt_mutex_init(&adap->bus_lock);
+ INIT_LIST_HEAD(&adap->userspace_clients);
/* Set default timeout to 1 second if not already set */
if (adap->timeout == 0)
return res;
/* Remove devices instantiated from sysfs */
- list_for_each_entry_safe(client, next, &userspace_devices, detected) {
- if (client->adapter == adap) {
- dev_dbg(&adap->dev, "Removing %s at 0x%x\n",
- client->name, client->addr);
- list_del(&client->detected);
- i2c_unregister_device(client);
- }
+ i2c_lock_adapter(adap);
+ list_for_each_entry_safe(client, next, &adap->userspace_clients,
+ detected) {
+ dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
+ client->addr);
+ list_del(&client->detected);
+ i2c_unregister_device(client);
}
+ i2c_unlock_adapter(adap);
/* Detach any active clients. This can't fail, thus we do not
checking the returned value. */
return 0;
/* Make sure there is something at this address */
- if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0)
- return 0;
+ if (addr == 0x73 && (adapter->class & I2C_CLASS_HWMON)) {
+ /* Special probe for FSC hwmon chips */
+ union i2c_smbus_data dummy;
- /* Prevent 24RF08 corruption */
- if ((addr & ~0x0f) == 0x50)
- i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL);
+ if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_READ, 0,
+ I2C_SMBUS_BYTE_DATA, &dummy) < 0)
+ return 0;
+ } else {
+ if (i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL) < 0)
+ return 0;
+
+ /* Prevent 24RF08 corruption */
+ if ((addr & ~0x0f) == 0x50)
+ i2c_smbus_xfer(adapter, addr, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL);
+ }
/* Finally call the custom detection function */
memset(&info, 0, sizeof(struct i2c_board_info));
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/i2c-smbus.h>
+#include <linux/slab.h>
struct i2c_smbus_alert {
unsigned int alert_edge_triggered:1;
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <acpi/acpi.h>
#include <linux/ide.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
+#include <linux/gfp.h>
#include <scsi/scsi.h>
* of it. The failed command will be retried after sense data
* is acquired.
*/
- blk_requeue_request(failed_rq->q, failed_rq);
drive->hwif->rq = NULL;
+ ide_requeue_and_plug(drive, failed_rq);
if (ide_queue_sense_rq(drive, pc)) {
blk_start_request(failed_rq);
ide_complete_rq(drive, -EIO, blk_rq_bytes(failed_rq));
#include <linux/kernel.h>
#include <linux/cdrom.h>
+#include <linux/gfp.h>
#include <linux/ide.h>
#include <scsi/scsi.h>
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
+ PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
+ PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/ide.h>
DEFINE_MUTEX(ide_setting_mtx);
#include <linux/kernel.h>
#include <linux/ide.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include "ide-disk.h"
*/
#include <linux/types.h>
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/ide.h>
#include <linux/scatterlist.h>
if (rq) {
hwif->rq = NULL;
rq->errors = 0;
+ ide_requeue_and_plug(drive, rq);
}
return ret;
}
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
-#include <linux/slab.h>
#include <linux/cdrom.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
blk_plug_device(q);
}
-static void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
+void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq)
{
struct request_queue *q = drive->queue;
unsigned long flags;
#include <linux/hdreg.h>
#include <linux/ide.h>
+#include <linux/slab.h>
static const struct ide_ioctl_devset ide_ioctl_settings[] = {
{ HDIO_GET_32BIT, HDIO_SET_32BIT, &ide_devset_io_32bit },
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/ide.h>
#include <linux/jiffies.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/ide.h>
int generic_ide_suspend(struct device *dev, pm_message_t mesg)
if (irqd)
disable_irq(hwif->irq);
- rc = ide_port_wait_ready(hwif);
- if (rc == -ENODEV) {
- printk(KERN_INFO "%s: no devices on the port\n", hwif->name);
- goto out;
- } else if (rc == -EBUSY)
- printk(KERN_ERR "%s: not ready before the probe\n", hwif->name);
- else
- rc = -ENODEV;
+ if (ide_port_wait_ready(hwif) == -EBUSY)
+ printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
* Second drive should only exist if first drive was found,
if (drive->dev_flags & IDE_DFLAG_PRESENT)
rc = 0;
}
-out:
+
/*
* Use cached IRQ number. It might be (and is...) changed by probe
* code above
#include <linux/ctype.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/io.h>
{
struct request *rq;
int error;
+ int rw = !(cmd->tf_flags & IDE_TFLAG_WRITE) ? READ : WRITE;
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq = blk_get_request(drive->queue, rw, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
- if (cmd->tf_flags & IDE_TFLAG_WRITE)
- rq->cmd_flags |= REQ_RW;
-
/*
* (ks) We transfer currently only whole sectors.
* This is suffient for now. But, it would be great,
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/io.h>
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/errno.h>
#include <linux/ide.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ide.h>
{
struct via_isa_bridge *via_config;
unsigned int via_80w;
- u8 cached_device[2];
};
/**
.cable_detect = via82cxxx_cable_detect,
};
-static void via_write_devctl(ide_hwif_t *hwif, u8 ctl)
-{
- struct via82cxxx_dev *vdev = hwif->host->host_priv;
-
- outb(ctl, hwif->io_ports.ctl_addr);
- outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr);
-}
-
-static void __via_dev_select(ide_drive_t *drive, u8 select)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct via82cxxx_dev *vdev = hwif->host->host_priv;
-
- outb(select, hwif->io_ports.device_addr);
- vdev->cached_device[hwif->channel] = select;
-}
-
-static void via_dev_select(ide_drive_t *drive)
-{
- __via_dev_select(drive, drive->select | ATA_DEVICE_OBS);
-}
-
-static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
-
- if (valid & IDE_VALID_FEATURE)
- outb(tf->feature, io_ports->feature_addr);
- if (valid & IDE_VALID_NSECT)
- outb(tf->nsect, io_ports->nsect_addr);
- if (valid & IDE_VALID_LBAL)
- outb(tf->lbal, io_ports->lbal_addr);
- if (valid & IDE_VALID_LBAM)
- outb(tf->lbam, io_ports->lbam_addr);
- if (valid & IDE_VALID_LBAH)
- outb(tf->lbah, io_ports->lbah_addr);
- if (valid & IDE_VALID_DEVICE)
- __via_dev_select(drive, tf->device);
-}
-
-const struct ide_tp_ops via_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = via_write_devctl,
-
- .dev_select = via_dev_select,
- .tf_load = via_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
static const struct ide_port_info via82cxxx_chipset __devinitdata = {
.name = DRV_NAME,
.init_chipset = init_chipset_via82cxxx,
.enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
- .tp_ops = &via_tp_ops,
.port_ops = &via_port_ops,
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
IDE_HFLAG_POST_SET_MODE |
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/notifier.h>
#include <linux/cpumask.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/scatterlist.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
-#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/inetdevice.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <net/arp.h>
#include <net/neighbour.h>
#include <linux/random.h>
#include <linux/rbtree.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/workqueue.h>
#include <linux/kdev_t.h>
cm_dev->device = device_create(&cm_class, &ib_device->dev,
MKDEV(0, 0), NULL,
"%s", ib_device->name);
- if (!cm_dev->device) {
+ if (IS_ERR(cm_dev->device)) {
kfree(cm_dev);
return;
}
#include <linux/random.h>
#include <linux/idr.h>
#include <linux/inetdevice.h>
+#include <linux/slab.h>
#include <net/tcp.h>
#include <net/ipv6.h>
}
memcpy(id->route.path_rec, path_rec, sizeof *path_rec * num_paths);
+ id->route.num_paths = num_paths;
return 0;
err:
cma_comp_exch(id_priv, CMA_ROUTE_RESOLVED, CMA_ADDR_RESOLVED);
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
+#include <linux/slab.h>
#include <rdma/iw_cm.h>
#include <rdma/ib_addr.h>
*
*/
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <rdma/ib_cache.h>
#include "mad_priv.h"
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "mad_priv.h"
#include "mad_rmpp.h"
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/bitops.h>
#include <linux/random.h>
#include <linux/cdev.h>
#include <linux/idr.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/miscdevice.h>
+#include <linux/slab.h>
#include <rdma/rdma_user_cm.h>
#include <rdma/ib_marshall.h>
#include <linux/sched.h>
#include <linux/hugetlb.h>
#include <linux/dma-attrs.h>
+#include <linux/slab.h>
#include "uverbs.h"
#include <linux/compat.h>
#include <linux/sched.h>
#include <linux/semaphore.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/file.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/file.h>
#include <linux/cdev.h>
#include <linux/anon_inodes.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/tcp.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
*/
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/bitmap.h>
#include "c2.h"
* SOFTWARE.
*
*/
+#include <linux/slab.h>
+
#include "c2.h"
#include "c2_wr.h"
#include "c2_vq.h"
* SOFTWARE.
*
*/
+#include <linux/gfp.h>
+
#include "c2.h"
#include "c2_vq.h"
#include "c2_status.h"
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "c2.h"
#include "c2_vq.h"
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include "c2.h"
#include <linux/dma-mapping.h>
#include <linux/if_arp.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
*/
#include <linux/delay.h>
+#include <linux/gfp.h>
#include "c2.h"
#include "c2_vq.h"
#include <linux/mm.h>
#include <linux/inet.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/route.h>
*/
#ifdef DEBUG
#include <linux/types.h>
+#include <linux/slab.h>
#include "common.h"
#include "cxgb3_ioctl.h"
#include "cxio_hal.h"
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include "cxio_resource.h"
*/
#include <linux/module.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/skbuff.h>
#include <linux/timer.h>
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/mman.h>
#include <net/sock.h>
#include "iwch_provider.h"
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <rdma/iw_cm.h>
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
#include <linux/inetdevice.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
* SOFTWARE.
*/
#include <linux/sched.h>
+#include <linux/gfp.h>
#include "iwch_provider.h"
#include "iwch.h"
#include "iwch_cm.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_tools.h"
#include "ehca_iverbs.h"
#include "hcp_if.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_iverbs.h"
#include "ehca_classes.h"
#include "ehca_irq.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/gfp.h>
+
#include "ehca_tools.h"
#include "ehca_iverbs.h"
#include "hcp_if.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_classes.h"
#include "ehca_irq.h"
#include "ehca_iverbs.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
#include <rdma/ib_umem.h>
#include "ehca_iverbs.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_tools.h"
#include "ehca_iverbs.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_classes.h"
#include "ehca_tools.h"
#include "ehca_qes.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_classes.h"
#include "ehca_iverbs.h"
#include "ehca_mrmw.h"
* POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include "ehca_tools.h"
#include "ipz_pt_fn.h"
#include "ehca_classes.h"
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "ipath_verbs.h"
*/
#include <linux/scatterlist.h>
+#include <linux/gfp.h>
#include <rdma/ib_verbs.h>
#include "ipath_verbs.h"
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
#include <linux/cdev.h>
#include <linux/swap.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include "ipath_kernel.h"
#include <linux/pci.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "ipath_kernel.h"
#include <linux/module.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <asm/pgtable.h>
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include <rdma/ib_umem.h>
#include <rdma/ib_pack.h>
#include <rdma/ib_smi.h>
#include <linux/err.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "ipath_verbs.h"
*/
#include <linux/spinlock.h>
+#include <linux/gfp.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "ipath_verbs.h"
#include <linux/mm.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include "ipath_kernel.h"
#include <rdma/ib_mad.h>
#include <rdma/ib_user_verbs.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/utsname.h>
#include <linux/rculist.h>
#include <linux/rculist.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ipath_verbs.h"
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "mlx4_ib.h"
struct ib_ah *mlx4_ib_create_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr)
#include <linux/mlx4/cq.h>
#include <linux/mlx4/qp.h>
+#include <linux/slab.h>
#include "mlx4_ib.h"
#include "user.h"
#include <rdma/ib_smi.h>
#include <linux/mlx4/cmd.h>
+#include <linux/gfp.h>
#include "mlx4_ib.h"
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <rdma/ib_smi.h>
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "mlx4_ib.h"
static u32 convert_access(int acc)
mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
size, &mfrpl->map,
GFP_KERNEL);
- if (!mfrpl->ibfrpl.page_list)
+ if (!mfrpl->mapped_page_list)
goto err_free;
WARN_ON(mfrpl->map & 0x3f);
*/
#include <linux/log2.h>
+#include <linux/slab.h>
#include <rdma/ib_cache.h>
#include <rdma/ib_pack.h>
#include <linux/mlx4/qp.h>
#include <linux/mlx4/srq.h>
+#include <linux/slab.h>
#include "mlx4_ib.h"
#include "user.h"
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <rdma/ib_mad.h>
* SOFTWARE.
*/
+#include <linux/gfp.h>
#include <linux/hardirq.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "mthca_dev.h"
#include "mthca_cmd.h"
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/gfp.h>
#include "mthca_dev.h"
#include "mthca_config_reg.h"
*/
#include <linux/string.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include "mthca_dev.h"
#include "mthca_cmd.h"
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <rdma/ib_user_verbs.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include "mthca_dev.h"
#include <linux/init.h>
#include <linux/if_arp.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
#include <linux/list.h>
#include <linux/threads.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/neighbour.h>
#include <net/route.h>
#include <linux/tcp.h>
#include <linux/if_vlan.h>
#include <linux/inet_lro.h>
+#include <linux/slab.h>
#include "nes.h"
#include <linux/if_arp.h>
#include <linux/if_vlan.h>
#include <linux/ethtool.h>
+#include <linux/slab.h>
#include <net/tcp.h>
#include <net/inet_common.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
+#include <linux/slab.h>
#include <linux/crc32.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/moduleparam.h>
#include <linux/random.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <rdma/ib_verbs.h>
attr->cap.max_send_wr = nesqp->hwqp.sq_size;
attr->cap.max_recv_wr = nesqp->hwqp.rq_size;
attr->cap.max_recv_sge = 1;
- if (nes_drv_opt & NES_DRV_OPT_NO_INLINE_DATA) {
- init_attr->cap.max_inline_data = 0;
- } else {
- init_attr->cap.max_inline_data = 64;
- }
+ if (nes_drv_opt & NES_DRV_OPT_NO_INLINE_DATA)
+ attr->cap.max_inline_data = 0;
+ else
+ attr->cap.max_inline_data = 64;
init_attr->event_handler = nesqp->ibqp.event_handler;
init_attr->qp_context = nesqp->ibqp.qp_context;
#include <net/icmp.h>
#include <linux/icmpv6.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "ipoib.h"
#include <linux/err.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
struct file_operations;
#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/inetdevice.h>
#include <linux/delay.h>
#include <linux/completion.h>
+#include <linux/slab.h>
#include <net/dst.h>
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "ipoib.h"
int ipoib_mcast_attach(struct net_device *dev, u16 mlid, union ib_gid *mgid, int set_qkey)
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
#include <linux/net.h>
#include <linux/scatterlist.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <net/sock.h>
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "iscsi_iser.h"
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/slab.h>
/*
* Check that the effect_id is a valid effect and whether the user
#define debug(format, arg...) pr_debug("ff-memless: " format "\n", ## arg)
+#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/gameport.h>
-#include <linux/slab.h>
#define L4_PORT 0x201
#define L4_SELECT_ANALOG 0xa4
*/
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/input-polldev.h>
#include <linux/types.h>
#include <linux/input.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/random.h>
#include <linux/major.h>
#include <linux/proc_fs.h>
int input_get_keycode(struct input_dev *dev,
unsigned int scancode, unsigned int *keycode)
{
- return dev->getkeycode(dev, scancode, keycode);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&dev->event_lock, flags);
+ retval = dev->getkeycode(dev, scancode, keycode);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+
+ return retval;
}
EXPORT_SYMBOL(input_get_keycode);
.evbit = { BIT_MASK(EV_ABS) },
.absbit = { BIT_MASK(ABS_THROTTLE) },
},
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = {[BIT_WORD(BTN_JOYSTICK)] = BIT_MASK(BTN_JOYSTICK) },
+ },
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_GAMEPAD)] = BIT_MASK(BTN_GAMEPAD) },
+ },
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_TRIGGER_HAPPY)] = BIT_MASK(BTN_TRIGGER_HAPPY) },
+ },
{ } /* Terminating entry */
};
#include <linux/parport.h>
#include <linux/input.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("Atari, Amstrad, Commodore, Amiga, Sega, etc. joystick driver");
#include <linux/parport.h>
#include <linux/input.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("NES, SNES, N64, MultiSystem, PSX gamepad driver");
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
MODULE_DESCRIPTION("TurboGraFX parallel port interface driver");
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/mfd/adp5520.h>
+#include <linux/slab.h>
struct adp5520_keys {
struct input_dev *input;
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/i2c/adp5588.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/pm.h>
#include <linux/sysctl.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/ep93xx_keypad.h>
#include <linux/irq.h>
#include <linux/sched.h>
#include <linux/pm.h>
+#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/proc_fs.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/timer.h>
/*
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <mach/jornada720.h>
#include <mach/hardware.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/i2c/lm8323.h>
+#include <linux/slab.h>
/* Commands to send to the chip. */
#define LM8323_CMD_READ_ID 0x80 /* Read chip ID. */
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
struct matrix_keypad {
const struct matrix_keypad_platform_data *pdata;
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY);
+ if (!pdata->no_autorepeat)
+ input_dev->evbit[0] |= BIT_MASK(EV_REP);
input_dev->open = matrix_keypad_start;
input_dev->close = matrix_keypad_stop;
#include <linux/module.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <mach/gpio.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
struct opencores_kbd {
struct input_dev *input;
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/pxa930_rotary.h>
#include <linux/bitmap.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
static const struct {
unsigned char kymd, keyout, keyin;
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <mach/gpio.h>
#include <mach/tosa.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
+#include <linux/slab.h>
/*
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/w90p910_keypad.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/slab.h>
#define PM8607_WAKEUP 0x0b
* Module and Version Information, Module Parameters
*/
-#define ATI_REMOTE_VENDOR_ID 0x0bc7
-#define ATI_REMOTE_PRODUCT_ID 0x004
-#define LOLA_REMOTE_PRODUCT_ID 0x002
-#define MEDION_REMOTE_PRODUCT_ID 0x006
+#define ATI_REMOTE_VENDOR_ID 0x0bc7
+#define LOLA_REMOTE_PRODUCT_ID 0x0002
+#define LOLA2_REMOTE_PRODUCT_ID 0x0003
+#define ATI_REMOTE_PRODUCT_ID 0x0004
+#define NVIDIA_REMOTE_PRODUCT_ID 0x0005
+#define MEDION_REMOTE_PRODUCT_ID 0x0006
#define DRIVER_VERSION "2.2.1"
#define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>"
#define err(format, arg...) printk(KERN_ERR format , ## arg)
static struct usb_device_id ati_remote_table[] = {
- { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID) },
+ { USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID) },
{ USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID) },
{} /* Terminating entry */
};
*/
#include <linux/usb/input.h>
+#include <linux/slab.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
#define DRIVER_VERSION "0.3"
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <asm/portmux.h>
#include <asm/bfin_rotary.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#define BUTTONS_POLL_INTERVAL 30 /* msec */
#define BUTTONS_COUNT_THRESHOLD 3
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/platform_device.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/mfd/ezx-pcap.h>
+#include <linux/slab.h>
struct pcap_keys {
struct pcap_chip *pcap;
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/mfd/pcf50633/core.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/rotary_encoder.h>
+#include <linux/slab.h>
#define DRV_NAME "rotary-encoder"
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#ifdef CONFIG_SGI_IP22
#include <asm/sgi/ioc.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/of_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl4030-codec.h>
#include <linux/input.h>
+#include <linux/slab.h>
/* MODULE ID2 */
#define LEDEN 0x00
#include <linux/io.h>
#include <linux/bitrev.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#define DRVNAME "winbond-cir"
#include <linux/module.h>
#include <linux/preempt.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/input.h>
* the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
.disconnect = bcm5974_disconnect,
.suspend = bcm5974_suspend,
.resume = bcm5974_resume,
- .reset_resume = bcm5974_resume,
.id_table = bcm5974_table,
.supports_autosuspend = 1,
};
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/serio.h>
printk(KERN_DEBUG format, ##arg); \
} while (0)
+static bool force_elantech;
+module_param_named(force_elantech, force_elantech, bool, 0644);
+MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
+
/*
* Send a Synaptics style sliced query command
*/
static int old_fingers;
if (etd->fw_version_maj == 0x01) {
- /* byte 0: D U p1 p2 1 p3 R L
- byte 1: f 0 th tw x9 x8 y9 y8 */
+ /*
+ * byte 0: D U p1 p2 1 p3 R L
+ * byte 1: f 0 th tw x9 x8 y9 y8
+ */
fingers = ((packet[1] & 0x80) >> 7) +
((packet[1] & 0x30) >> 4);
} else {
- /* byte 0: n1 n0 p2 p1 1 p3 R L
- byte 1: 0 0 0 0 x9 x8 y9 y8 */
+ /*
+ * byte 0: n1 n0 p2 p1 1 p3 R L
+ * byte 1: 0 0 0 0 x9 x8 y9 y8
+ */
fingers = (packet[0] & 0xc0) >> 6;
}
input_report_key(dev, BTN_TOUCH, fingers != 0);
- /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
- byte 3: y7 y6 y5 y4 y3 y2 y1 y0 */
+ /*
+ * byte 2: x7 x6 x5 x4 x3 x2 x1 x0
+ * byte 3: y7 y6 y5 y4 y3 y2 y1 y0
+ */
if (fingers) {
input_report_abs(dev, ABS_X,
((packet[1] & 0x0c) << 6) | packet[2]);
- input_report_abs(dev, ABS_Y, ETP_YMAX_V1 -
- (((packet[1] & 0x03) << 8) | packet[3]));
+ input_report_abs(dev, ABS_Y,
+ ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
}
input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
switch (fingers) {
case 1:
- /* byte 1: x15 x14 x13 x12 x11 x10 x9 x8
- byte 2: x7 x6 x5 x4 x4 x2 x1 x0 */
- input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]);
- /* byte 4: y15 y14 y13 y12 y11 y10 y8 y8
- byte 5: y7 y6 y5 y4 y3 y2 y1 y0 */
- input_report_abs(dev, ABS_Y, ETP_YMAX_V2 -
- ((packet[4] << 8) | packet[5]));
+ /*
+ * byte 1: . . . . . x10 x9 x8
+ * byte 2: x7 x6 x5 x4 x4 x2 x1 x0
+ */
+ input_report_abs(dev, ABS_X,
+ ((packet[1] & 0x07) << 8) | packet[2]);
+ /*
+ * byte 4: . . . . . . y9 y8
+ * byte 5: y7 y6 y5 y4 y3 y2 y1 y0
+ */
+ input_report_abs(dev, ABS_Y,
+ ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]));
break;
case 2:
- /* The coordinate of each finger is reported separately with
- a lower resolution for two finger touches */
- /* byte 0: . . ay8 ax8 . . . .
- byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */
+ /*
+ * The coordinate of each finger is reported separately
+ * with a lower resolution for two finger touches:
+ * byte 0: . . ay8 ax8 . . . .
+ * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+ */
x1 = ((packet[0] & 0x10) << 4) | packet[1];
/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
- /* byte 3: . . by8 bx8 . . . .
- byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */
+ /*
+ * byte 3: . . by8 bx8 . . . .
+ * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
+ */
x2 = ((packet[3] & 0x10) << 4) | packet[4];
/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
- /* For compatibility with the X Synaptics driver scale up one
- coordinate and report as ordinary mouse movent */
+ /*
+ * For compatibility with the X Synaptics driver scale up
+ * one coordinate and report as ordinary mouse movent
+ */
input_report_abs(dev, ABS_X, x1 << 2);
input_report_abs(dev, ABS_Y, y1 << 2);
- /* For compatibility with the proprietary X Elantech driver
- report both coordinates as hat coordinates */
+ /*
+ * For compatibility with the proprietary X Elantech driver
+ * report both coordinates as hat coordinates
+ */
input_report_abs(dev, ABS_HAT0X, x1);
input_report_abs(dev, ABS_HAT0Y, y1);
input_report_abs(dev, ABS_HAT1X, x2);
param[0], param[1], param[2]);
if (param[0] == 0 || param[1] != 0) {
- pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
- return -1;
+ if (!force_elantech) {
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
+ return -1;
+ }
+
+ pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
}
if (set_properties) {
* Assume every version greater than this is new EeePC style
* hardware with 6 byte packets
*/
- if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) {
+ if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
+ etd->fw_version_maj > 0x02) {
etd->hw_version = 2;
/* For now show extra debug information */
etd->debug = 1;
*/
#define DEBUG
+#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/serio.h>
#include <linux/libps2.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include "psmouse.h"
#include "lifebook.h"
struct psmouse_protocol {
enum psmouse_type type;
bool maxproto;
+ bool ignore_parity; /* Protocol should ignore parity errors from KBC */
const char *name;
const char *alias;
int (*detect)(struct psmouse *, bool);
if (psmouse->state == PSMOUSE_IGNORE)
goto out;
- if (flags & (SERIO_PARITY|SERIO_TIMEOUT)) {
+ if (unlikely((flags & SERIO_TIMEOUT) ||
+ ((flags & SERIO_PARITY) && !psmouse->ignore_parity))) {
+
if (psmouse->state == PSMOUSE_ACTIVATED)
printk(KERN_WARNING "psmouse.c: bad data from KBC -%s%s\n",
flags & SERIO_TIMEOUT ? " timeout" : "",
.name = "PS/2",
.alias = "bare",
.maxproto = true,
+ .ignore_parity = true,
.detect = ps2bare_detect,
},
#ifdef CONFIG_MOUSE_PS2_LOGIPS2PP
.name = "ImPS/2",
.alias = "imps",
.maxproto = true,
+ .ignore_parity = true,
.detect = intellimouse_detect,
},
{
.name = "ImExPS/2",
.alias = "exps",
.maxproto = true,
+ .ignore_parity = true,
.detect = im_explorer_detect,
},
#ifdef CONFIG_MOUSE_PS2_SYNAPTICS
static int psmouse_switch_protocol(struct psmouse *psmouse,
const struct psmouse_protocol *proto)
{
+ const struct psmouse_protocol *selected_proto;
struct input_dev *input_dev = psmouse->dev;
input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
return -1;
psmouse->type = proto->type;
- } else
+ selected_proto = proto;
+ } else {
psmouse->type = psmouse_extensions(psmouse,
psmouse_max_proto, true);
+ selected_proto = psmouse_protocol_by_type(psmouse->type);
+ }
+
+ psmouse->ignore_parity = selected_proto->ignore_parity;
/*
* If mouse's packet size is 3 there is no point in polling the
psmouse->resync_time = 0;
snprintf(psmouse->devname, sizeof(psmouse->devname), "%s %s %s",
- psmouse_protocol_by_type(psmouse->type)->name, psmouse->vendor, psmouse->name);
+ selected_proto->name, psmouse->vendor, psmouse->name);
input_dev->name = psmouse->devname;
input_dev->phys = psmouse->phys;
unsigned char pktcnt;
unsigned char pktsize;
unsigned char type;
+ bool ignore_parity;
bool acks_disable_command;
unsigned int model;
unsigned long last;
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/pxa930_trkball.h>
#include <linux/libps2.h>
#include <linux/serio.h>
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include "psmouse.h"
#include "sentelic.h"
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
+#include <linux/slab.h>
#include "psmouse.h"
#include "synaptics.h"
if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
return -1;
priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
- priv->ext_cap = 0;
+ priv->ext_cap = priv->ext_cap_0c = 0;
+
if (!SYN_CAP_VALID(priv->capabilities))
return -1;
if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
printk(KERN_ERR "Synaptics claims to have extended capabilities,"
- " but I'm not able to read them.");
+ " but I'm not able to read them.\n");
} else {
priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
priv->ext_cap &= 0xff0fff;
}
}
+
+ if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
+ if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
+ printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
+ " but I'm not able to read it.\n");
+ } else {
+ priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
+ }
+ }
+
return 0;
}
hw->left = (buf[0] & 0x01) ? 1 : 0;
hw->right = (buf[0] & 0x02) ? 1 : 0;
- if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
+ if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ /*
+ * Clickpad's button is transmitted as middle button,
+ * however, since it is primary button, we will report
+ * it as BTN_LEFT.
+ */
+ hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
+
+ } else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
if (hw->w == 2)
hw->scroll = (signed char)(buf[1]);
dev->absres[ABS_X] = priv->x_res;
dev->absres[ABS_Y] = priv->y_res;
+
+ if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+ /* Clickpads report only left button */
+ __clear_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+ }
}
static void synaptics_disconnect(struct psmouse *psmouse)
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
- printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+ printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
- priv->model_id, priv->capabilities, priv->ext_cap);
+ priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
set_input_params(psmouse->dev, priv);
#define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
+#define SYN_QUE_EXT_CAPAB_0C 0x0c
/* synatics modes */
#define SYN_BIT_ABSOLUTE_MODE (1 << 7)
#define SYN_CAP_VALID(c) ((((c) & 0x00ff00) >> 8) == 0x47)
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
+#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
/* synaptics modes query bits */
#define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7))
unsigned long int model_id; /* Model-ID */
unsigned long int capabilities; /* Capabilities */
unsigned long int ext_cap; /* Extended Capabilities */
+ unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
unsigned long int identity; /* Identification */
int x_res; /* X resolution in units/mm */
int y_res; /* Y resolution in units/mm */
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#define DRIVER_NAME "synaptics_i2c"
/* maximum product id is 15 characters */
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
* Trademarks are the property of their respective owners.
*/
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serio.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#define DRV_NAME "altera_ps2"
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
/* PSIF register offsets */
#define PSIF_CR 0x00
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/serio.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <linux/rcupdate.h>
#include <linux/platform_device.h>
#include <linux/i8042.h>
+#include <linux/slab.h>
#include <asm/io.h>
static bool i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
-MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing conrtoller is present.");
+MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present.");
static bool i8042_unlock;
module_param_named(unlock, i8042_unlock, bool, 0);
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/module.h>
#include <linux/parport.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/ioport.h>
#include <linux/input.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/serio.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <linux/serio.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
MODULE_DESCRIPTION("Generic support for sparse keymaps");
unsigned int scancode,
unsigned int *keycode)
{
- const struct key_entry *key =
- sparse_keymap_entry_from_scancode(dev, scancode);
+ const struct key_entry *key;
- if (key && key->type == KE_KEY) {
- *keycode = key->keycode;
- return 0;
+ if (dev->keycode) {
+ key = sparse_keymap_entry_from_scancode(dev, scancode);
+ if (key && key->type == KE_KEY) {
+ *keycode = key->keycode;
+ return 0;
+ }
}
return -EINVAL;
struct key_entry *key;
int old_keycode;
- if (keycode < 0 || keycode > KEY_MAX)
- return -EINVAL;
-
- key = sparse_keymap_entry_from_scancode(dev, scancode);
- if (key && key->type == KE_KEY) {
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!sparse_keymap_entry_from_keycode(dev, old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
+ if (dev->keycode) {
+ key = sparse_keymap_entry_from_scancode(dev, scancode);
+ if (key && key->type == KE_KEY) {
+ old_keycode = key->keycode;
+ key->keycode = keycode;
+ set_bit(keycode, dev->keybit);
+ if (!sparse_keymap_entry_from_keycode(dev, old_keycode))
+ clear_bit(old_keycode, dev->keybit);
+ return 0;
+ }
}
return -EINVAL;
return 0;
err_out:
- kfree(keymap);
+ kfree(map);
return error;
}
*
* This function is used to free memory allocated by sparse keymap
* in an input device that was set up by sparse_keymap_setup().
+ * NOTE: It is safe to cal this function while input device is
+ * still registered (however the drivers should care not to try to
+ * use freed keymap and thus have to shut off interrups/polling
+ * before freeing the keymap).
*/
void sparse_keymap_free(struct input_dev *dev)
{
+ unsigned long flags;
+
+ /*
+ * Take event lock to prevent racing with input_get_keycode()
+ * and input_set_keycode() if we are called while input device
+ * is still registered.
+ */
+ spin_lock_irqsave(&dev->event_lock, flags);
+
kfree(dev->keycode);
dev->keycode = NULL;
dev->keycodemax = 0;
- dev->getkeycode = NULL;
- dev->setkeycode = NULL;
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
}
EXPORT_SYMBOL(sparse_keymap_free);
int rv;
mutex_lock(&wacom->lock);
- if (wacom->open) {
+
+ /* switch to wacom mode first */
+ wacom_query_tablet_data(intf, features);
+
+ if (wacom->open)
rv = usb_submit_urb(wacom->irq, GFP_NOIO);
- /* switch to wacom mode if needed */
- if (!wacom_retrieve_hid_descriptor(intf, features))
- wacom_query_tablet_data(intf, features);
- } else
+ else
rv = 0;
+
mutex_unlock(&wacom->lock);
return rv;
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
- int x, y, prox;
- int rw = 0;
- int retval = 0;
+ int x, y, rw;
+ static int penData = 0;
if (data[0] != WACOM_REPORT_PENABLED) {
dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
- goto exit;
+ return 0;
}
- prox = data[1] & 0x80;
- if (prox || wacom->id[0]) {
- if (prox) {
- switch ((data[1] >> 5) & 3) {
+ if (data[1] & 0x80) {
+ /* in prox and not a pad data */
+ penData = 1;
+
+ switch ((data[1] >> 5) & 3) {
case 0: /* Pen */
wacom->tool[0] = BTN_TOOL_PEN;
case 2: /* Mouse with wheel */
wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
+ if (features->type == WACOM_G4 || features->type == WACOM_MO) {
+ rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+ wacom_report_rel(wcombo, REL_WHEEL, -rw);
+ } else
+ wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
/* fall through */
case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
wacom->id[0] = CURSOR_DEVICE_ID;
+ wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+ wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+ if (features->type == WACOM_G4 || features->type == WACOM_MO)
+ wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
+ else
+ wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
break;
- }
}
x = wacom_le16_to_cpu(&data[2]);
y = wacom_le16_to_cpu(&data[4]);
wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
- } else {
- wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
- wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
- if (features->type == WACOM_G4 ||
- features->type == WACOM_MO) {
- wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
- rw = (signed)(data[7] & 0x04) - (data[7] & 0x03);
- } else {
- wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
- rw = -(signed)data[6];
- }
- wacom_report_rel(wcombo, REL_WHEEL, rw);
}
-
- if (!prox)
- wacom->id[0] = 0;
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
- wacom_report_key(wcombo, wacom->tool[0], prox);
- wacom_input_sync(wcombo); /* sync last event */
+ wacom_report_key(wcombo, wacom->tool[0], 1);
+ } else if (wacom->id[0]) {
+ wacom_report_abs(wcombo, ABS_X, 0);
+ wacom_report_abs(wcombo, ABS_Y, 0);
+ if (wacom->tool[0] == BTN_TOOL_MOUSE) {
+ wacom_report_key(wcombo, BTN_LEFT, 0);
+ wacom_report_key(wcombo, BTN_RIGHT, 0);
+ wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ }
+ wacom->id[0] = 0;
+ wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+ wacom_report_key(wcombo, wacom->tool[0], 0);
}
/* send pad data */
switch (features->type) {
case WACOM_G4:
- prox = data[7] & 0xf8;
- if (prox || wacom->id[1]) {
+ if (data[7] & 0xf8) {
+ if (penData) {
+ wacom_input_sync(wcombo); /* sync last event */
+ if (!wacom->id[0])
+ penData = 0;
+ }
wacom->id[1] = PAD_DEVICE_ID;
wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
wacom_report_rel(wcombo, REL_WHEEL, rw);
wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
- if (!prox)
- wacom->id[1] = 0;
- wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+ } else if (wacom->id[1]) {
+ if (penData) {
+ wacom_input_sync(wcombo); /* sync last event */
+ if (!wacom->id[0])
+ penData = 0;
+ }
+ wacom->id[1] = 0;
+ wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
+ wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+ wacom_report_rel(wcombo, REL_WHEEL, 0);
+ wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+ wacom_report_abs(wcombo, ABS_MISC, 0);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
}
- retval = 1;
break;
case WACOM_MO:
- prox = (data[7] & 0xf8) || data[8];
- if (prox || wacom->id[1]) {
+ if ((data[7] & 0xf8) || (data[8] & 0xff)) {
+ if (penData) {
+ wacom_input_sync(wcombo); /* sync last event */
+ if (!wacom->id[0])
+ penData = 0;
+ }
wacom->id[1] = PAD_DEVICE_ID;
wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
- if (!prox)
- wacom->id[1] = 0;
wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+ } else if (wacom->id[1]) {
+ if (penData) {
+ wacom_input_sync(wcombo); /* sync last event */
+ if (!wacom->id[0])
+ penData = 0;
+ }
+ wacom->id[1] = 0;
+ wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
+ wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
+ wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
+ wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
+ wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
+ wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+ wacom_report_abs(wcombo, ABS_MISC, 0);
+ wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
}
- retval = 1;
break;
}
-exit:
- return retval;
+ return 1;
}
static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
static void wacom_tpc_finger_in(struct wacom_wac *wacom, void *wcombo, char *data, int idx)
{
wacom_report_abs(wcombo, ABS_X,
- data[2 + idx * 2] | ((data[3 + idx * 2] & 0x7f) << 8));
+ (data[2 + idx * 2] & 0xff) | ((data[3 + idx * 2] & 0x7f) << 8));
wacom_report_abs(wcombo, ABS_Y,
- data[6 + idx * 2] | ((data[7 + idx * 2] & 0x7f) << 8));
+ (data[6 + idx * 2] & 0xff) | ((data[7 + idx * 2] & 0x7f) << 8));
wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
wacom_report_key(wcombo, wacom->tool[idx], 1);
if (idx)
touchInProx = 0;
- if (!wacom->id[0]) { /* first in prox */
- /* Going into proximity select tool */
- wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
- if (wacom->tool[0] == BTN_TOOL_PEN)
- wacom->id[0] = STYLUS_DEVICE_ID;
- else
- wacom->id[0] = ERASER_DEVICE_ID;
- }
- wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
- wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
- wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
- wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
- pressure = ((data[7] & 0x01) << 8) | data[6];
- if (pressure < 0)
- pressure = features->pressure_max + pressure + 1;
- wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
- wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
- if (!prox) { /* out-prox */
+ if (prox) { /* in prox */
+ if (!wacom->id[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[0] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ else
+ wacom->id[0] = ERASER_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x05);
+ } else {
+ wacom_report_abs(wcombo, ABS_X, 0);
+ wacom_report_abs(wcombo, ABS_Y, 0);
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
wacom->id[0] = 0;
/* pen is out so touch can be enabled now */
touchInProx = 1;
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/slab.h>
#define MEAS_LEN (8)
#define ACCURATE_BIT (12)
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/slab.h>
#define AC97C_ICA 0x10
#define AC97C_CBRHR 0x30
#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/mfd/da903x.h>
+#include <linux/slab.h>
#define DA9034_MANUAL_CTRL 0x50
#define DA9034_LDO_ADC_EN (1 << 4)
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/input/eeti_ts.h>
+#include <linux/slab.h>
static int flip_x;
module_param(flip_x, bool, 0644);
return IRQ_HANDLED;
}
-static int eeti_ts_open(struct input_dev *dev)
+static void eeti_ts_start(struct eeti_ts_priv *priv)
{
- struct eeti_ts_priv *priv = input_get_drvdata(dev);
-
enable_irq(priv->irq);
/* Read the events once to arm the IRQ */
eeti_ts_read(&priv->work);
+}
+
+static void eeti_ts_stop(struct eeti_ts_priv *priv)
+{
+ disable_irq(priv->irq);
+ cancel_work_sync(&priv->work);
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+ struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+ eeti_ts_start(priv);
return 0;
}
{
struct eeti_ts_priv *priv = input_get_drvdata(dev);
- disable_irq(priv->irq);
- cancel_work_sync(&priv->work);
+ eeti_ts_stop(priv);
}
static int __devinit eeti_ts_probe(struct i2c_client *client,
unsigned int irq_flags;
int err = -ENOMEM;
- /* In contrast to what's described in the datasheet, there seems
+ /*
+ * In contrast to what's described in the datasheet, there seems
* to be no way of probing the presence of that device using I2C
* commands. So we need to blindly believe it is there, and wait
- * for interrupts to occur. */
+ * for interrupts to occur.
+ */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
goto err2;
}
- /* Disable the irq for now. It will be enabled once the input device
- * is opened. */
- disable_irq(priv->irq);
+ /*
+ * Disable the device for now. It will be enabled once the
+ * input device is opened.
+ */
+ eeti_ts_stop(priv);
device_init_wakeup(&client->dev, 0);
return 0;
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
free_irq(priv->irq, priv);
+ /*
+ * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
+ * so that device still works if we reload the driver.
+ */
+ enable_irq(priv->irq);
+
input_unregister_device(priv->input);
i2c_set_clientdata(client, NULL);
kfree(priv);
static int eeti_ts_suspend(struct i2c_client *client, pm_message_t mesg)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+ struct input_dev *input_dev = priv->input;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ eeti_ts_stop(priv);
+
+ mutex_unlock(&input_dev->mutex);
if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq);
static int eeti_ts_resume(struct i2c_client *client)
{
struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+ struct input_dev *input_dev = priv->input;
if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq);
+ mutex_lock(&input_dev->mutex);
+
+ if (input_dev->users)
+ eeti_ts_start(priv);
+
+ mutex_unlock(&input_dev->mutex);
+
return 0;
}
#else
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/init.h>
#define MC13783_TS_NAME "mc13783-ts"
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/irq.h>
+#include <linux/slab.h>
/* Registers */
#define MCS5000_TS_STATUS 0x00
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/i2c.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/suspend.h>
-#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/ucb1400.h>
#include <linux/clk.h>
#include <linux/input.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
/* ADC controller bit defines */
#define ADC_DELAY 0xf00
#include <linux/wm97xx.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/slab.h>
#define TS_NAME "wm97xx"
#define WM_CORE_VERSION "1.00"
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <asm/xen/hypervisor.h>
#include "act2000_isa.h"
#include "capi.h"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
static unsigned short act2000_isa_ports[] =
#include <linux/fs.h>
#include <linux/mount.h>
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/isdn/capilli.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/isdn/capiutil.h>
+#include <linux/slab.h>
/* from CAPI2.0 DDK AVM Berlin GmbH */
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/isdn/capicmd.h>
#include <linux/isdn/capiutil.h>
#include <linux/module.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
#else
*/
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
*/
#include "gigaset.h"
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/timer.h>
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
*/
#include "gigaset.h"
-#include <linux/ctype.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/isdn/capilli.h>
*/
#include "gigaset.h"
-#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/compiler.h>
#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/usb.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ppp_defs.h>
#include "gigaset.h"
#include <linux/gigaset_dev.h>
-#include <linux/tty.h>
#include <linux/tty_flip.h>
/*** our ioctls ***/
*/
#include "gigaset.h"
-#include <linux/ctype.h>
static ssize_t show_cidmode(struct device *dev,
struct device_attribute *attr, char *buf)
*/
#include "gigaset.h"
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
-#include <linux/tty.h>
#include <linux/completion.h>
/* Version Information */
*/
#include "gigaset.h"
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ioport.h>
#include <linux/capi.h>
#include <linux/kernelcapi.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <linux/capi.h>
#include <linux/kernelcapi.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/capi.h>
#include <linux/kernelcapi.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/netdevice.h>
#include <linux/kernelcapi.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <linux/isdn/capicmd.h>
#include <linux/isdn/capiutil.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/seq_file.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ipac.h"
#define HFC_MULTI_VERSION "2.03"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
+#include <linux/slab.h>
#include "hfc_pci.h"
#include <linux/delay.h>
#include <linux/usb.h>
#include <linux/mISDNhw.h>
+#include <linux/slab.h>
#include "hfcsusb.h"
static const char *hfcsusb_rev = "Revision: 0.3.3 (socket), 2008-11-05";
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
+#include <linux/slab.h>
#include "ipac.h"
#define INFINEON_REV "1.0"
*
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mISDNhw.h>
#include "ipac.h"
*/
/* #define DEBUG */
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
#include <linux/mISDNhw.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
+#include <linux/slab.h>
#include "ipac.h"
#include "iohelper.h"
#include "netjet.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
+#include <linux/slab.h>
#include "w6692.h"
#define W6692_REV "2.0"
#include "amd7930_fn.h"
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/gfp.h>
static void Amd7930_new_ph(struct IsdnCardState *cs);
#include "isac.h"
#include "isdnl1.h"
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/isapnp.h>
#include <linux/interrupt.h>
handler.
*/
-static int avma1cs_config(struct pcmcia_device *link);
+static int avma1cs_config(struct pcmcia_device *link) __devinit ;
static void avma1cs_release(struct pcmcia_device *link);
/*
needed to manage one actual PCMCIA card.
*/
-static void avma1cs_detach(struct pcmcia_device *p_dev);
+static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ;
/*
======================================================================*/
-static int avma1cs_probe(struct pcmcia_device *p_dev)
+static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
======================================================================*/
-static void avma1cs_detach(struct pcmcia_device *link)
+static void __devexit avma1cs_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link);
avma1cs_release(link);
}
-static int avma1cs_config(struct pcmcia_device *link)
+static int __devinit avma1cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
int i;
.name = "avma1_cs",
},
.probe = avma1cs_probe,
- .remove = avma1cs_detach,
+ .remove = __devexit_p(avma1cs_detach),
.id_table = avma1cs_ids,
};
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include "hisax.h"
#include <linux/isdn/capicmd.h>
#include <linux/kernel_stat.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#define HISAX_STATUS_BUFSIZE 4096
/*
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include "hisax.h"
#include "arcofi.h"
#include "isac.h"
handler.
*/
-static int elsa_cs_config(struct pcmcia_device *link);
+static int elsa_cs_config(struct pcmcia_device *link) __devinit ;
static void elsa_cs_release(struct pcmcia_device *link);
/*
needed to manage one actual PCMCIA card.
*/
-static void elsa_cs_detach(struct pcmcia_device *p_dev);
+static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
/*
A driver needs to provide a dev_node_t structure for each device
======================================================================*/
-static int elsa_cs_probe(struct pcmcia_device *link)
+static int __devinit elsa_cs_probe(struct pcmcia_device *link)
{
local_info_t *local;
======================================================================*/
-static void elsa_cs_detach(struct pcmcia_device *link)
+static void __devexit elsa_cs_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
return -ENODEV;
}
-static int elsa_cs_config(struct pcmcia_device *link)
+static int __devinit elsa_cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
int i;
.name = "elsa_cs",
},
.probe = elsa_cs_probe,
- .remove = elsa_cs_detach,
+ .remove = __devexit_p(elsa_cs_detach),
.id_table = elsa_ids,
.suspend = elsa_suspend,
.resume = elsa_resume,
#include <linux/serial.h>
#include <linux/serial_reg.h>
+#include <linux/slab.h>
#define MAX_MODEM_BUF 256
#define WAKEUP_CHARS (MAX_MODEM_BUF/2)
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include "hisax.h"
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
#include <linux/wait.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "hisax.h"
#include "hfc_2bds0.h"
#include "isdnl1.h"
#include "isac.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
+#include <linux/slab.h>
static inline int
WaitForBusy(struct IsdnCardState *cs)
#include "isdnl1.h"
#include <linux/interrupt.h>
#include <linux/isapnp.h>
+#include <linux/slab.h>
static const char *hfcsx_revision = "$Revision: 1.12.2.5 $";
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include "hisax.h"
#include "hisax_if.h"
#include "hfc_usb.h"
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include "hisax_isac.h"
#include "isac.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
+#include <linux/slab.h>
static char *HSCXVer[] =
{"A1", "?1", "A2", "?3", "A3", "V2.1", "?6", "?7",
// #include "arcofi.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
+#include <linux/slab.h>
#define DBUSY_TIMER_VALUE 80
#define ARCOFI_USE 0
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include "hisax_if.h"
#include "hisax.h"
#include "arcofi.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/init.h>
#define DBUSY_TIMER_VALUE 80
#include "isar.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
+#include <linux/slab.h>
#define DBG_LOADFIRM 0
#define DUMP_MBOXFRAME 2
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include "hisax.h"
#include "isdnl1.h"
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include "hisax.h"
#include "isdnl2.h"
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include "hisax.h"
#include "isdnl3.h"
#include "jade.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
+#include <linux/slab.h>
int
#include "isdnl3.h"
#include "l3dss1.h"
#include <linux/ctype.h>
+#include <linux/slab.h>
extern char *HiSax_getrev(const char *revision);
static const char *dss1_revision = "$Revision: 2.32.2.3 $";
#include "isdnl3.h"
#include "l3ni1.h"
#include <linux/ctype.h>
+#include <linux/slab.h>
extern char *HiSax_getrev(const char *revision);
static const char *ni1_revision = "$Revision: 2.8.2.3 $";
#include "isdnl1.h"
#include <linux/interrupt.h>
#include <linux/ppp_defs.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include "netjet.h"
event handler.
*/
-static int sedlbauer_config(struct pcmcia_device *link);
+static int sedlbauer_config(struct pcmcia_device *link) __devinit ;
static void sedlbauer_release(struct pcmcia_device *link);
/*
needed to manage one actual PCMCIA card.
*/
-static void sedlbauer_detach(struct pcmcia_device *p_dev);
+static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
/*
You'll also need to prototype all the functions that will actually
======================================================================*/
-static int sedlbauer_probe(struct pcmcia_device *link)
+static int __devinit sedlbauer_probe(struct pcmcia_device *link)
{
local_info_t *local;
======================================================================*/
-static void sedlbauer_detach(struct pcmcia_device *link)
+static void __devexit sedlbauer_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link);
-static int sedlbauer_config(struct pcmcia_device *link)
+static int __devinit sedlbauer_config(struct pcmcia_device *link)
{
local_info_t *dev = link->priv;
win_req_t *req;
.name = "sedlbauer_cs",
},
.probe = sedlbauer_probe,
- .remove = sedlbauer_detach,
+ .remove = __devexit_p(sedlbauer_detach),
.id_table = sedlbauer_ids,
.suspend = sedlbauer_suspend,
.resume = sedlbauer_resume,
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/usb.h>
-#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/bitrev.h>
#include "st5481.h"
*/
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/usb.h>
-#include <linux/slab.h>
#include <linux/netdevice.h>
#include "st5481.h"
#include "hisax.h"
#include "isdnl2.h"
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/random.h>
handler.
*/
-static int teles_cs_config(struct pcmcia_device *link);
+static int teles_cs_config(struct pcmcia_device *link) __devinit ;
static void teles_cs_release(struct pcmcia_device *link);
/*
needed to manage one actual PCMCIA card.
*/
-static void teles_detach(struct pcmcia_device *p_dev);
+static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
/*
A linked list of "instances" of the teles_cs device. Each actual
======================================================================*/
-static int teles_probe(struct pcmcia_device *link)
+static int __devinit teles_probe(struct pcmcia_device *link)
{
local_info_t *local;
======================================================================*/
-static void teles_detach(struct pcmcia_device *link)
+static void __devexit teles_detach(struct pcmcia_device *link)
{
local_info_t *info = link->priv;
return -ENODEV;
}
-static int teles_cs_config(struct pcmcia_device *link)
+static int __devinit teles_cs_config(struct pcmcia_device *link)
{
local_info_t *dev;
int i;
.name = "teles_cs",
},
.probe = teles_probe,
- .remove = teles_detach,
+ .remove = __devexit_p(teles_detach),
.id_table = teles_ids,
.suspend = teles_suspend,
.resume = teles_resume,
#include "isdnl1.h"
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/slab.h>
/* table entry in the PCI devices list */
typedef struct {
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#define VER_DRIVER 0
#define VER_CARDTYPE 1
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <net/net_namespace.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include "hysdn_defs.h"
*/
#include <linux/isdn.h>
+#include <linux/slab.h>
#include "isdn_audio.h"
#include "isdn_common.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/isdn.h>
#include <linux/smp_lock.h>
*/
#include <linux/isdn.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/dst.h>
#include <net/pkt_sched.h>
#include <linux/isdn.h>
#include <linux/poll.h>
#include <linux/ppp-comp.h>
+#include <linux/slab.h>
#ifdef CONFIG_IPPP_FILTER
#include <linux/filter.h>
#endif
#undef ISDN_TTY_STAT_DEBUG
#include <linux/isdn.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/smp_lock.h>
#include "isdn_common.h"
/* #include <linux/isdn.h> */
#include <linux/netdevice.h>
#include <linux/concap.h>
+#include <linux/slab.h>
#include <linux/wanrouter.h>
#include <net/x25device.h>
#include "isdn_x25iface.h"
#include "icn.h"
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/sched.h>
static int portbase = ICN_BASEADDR;
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include "isdnloop.h"
*
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/spinlock.h>
*
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/module.h>
/* delay.h is required for hw_lock.h */
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mISDNif.h>
#include <linux/mISDNdsp.h>
*/
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/mISDNif.h>
#include <linux/mISDNdsp.h>
#include <linux/module.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/string.h>
#include <linux/mISDNif.h>
*
*/
+#include <linux/gfp.h>
#include <linux/mISDNif.h>
#include <linux/mISDNdsp.h>
#include "core.h"
*
*/
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/mISDNhw.h>
#include <linux/inet.h>
#include <linux/workqueue.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include "core.h"
#include "l1oip.h"
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mISDNhw.h>
#include "core.h"
*/
#include <linux/mISDNif.h>
+#include <linux/slab.h>
#include "core.h"
#include "fsm.h"
#include "layer2.h"
*/
#include <linux/mISDNif.h>
+#include <linux/slab.h>
#include "core.h"
static u_int *debug;
*
*/
+#include <linux/slab.h>
#include <linux/mISDNif.h>
#include <linux/kthread.h>
#include <linux/smp_lock.h>
*/
#include "layer2.h"
#include <linux/random.h>
+#include <linux/slab.h>
#include "core.h"
#define ID_REQUEST 1
#include <linux/poll.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/skbuff.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/skbuff.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "includes.h"
#include "hardware.h"
#include "card.h"
#include <linux/acpi.h>
#include <linux/leds.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Louis Davis/Jim Dailey");
MODULE_DESCRIPTION("Dell LED Control Driver");
#include <linux/timer.h>
#include <linux/rwsem.h>
#include <linux/leds.h>
+#include <linux/slab.h>
#include "leds.h"
/*
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/leds.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/mfd/88pm860x.h>
#include <linux/leds.h>
#include <linux/workqueue.h>
#include <linux/mfd/adp5520.h>
+#include <linux/slab.h>
struct adp5520_led {
struct led_classdev cdev;
#include <linux/leds.h>
#include <linux/io.h>
#include <linux/atmel_pwm.h>
+#include <linux/slab.h>
struct pwmled {
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/leds-bd2802.h>
+#include <linux/slab.h>
#define LED_CTL(rgb2en, rgb1en) ((rgb2en) << 4 | ((rgb1en) << 0))
#include <linux/leds.h>
#include <linux/workqueue.h>
#include <linux/mfd/da903x.h>
+#include <linux/slab.h>
#define DA9030_LED1_CONTROL 0x20
#define DA9030_LED2_CONTROL 0x21
* LED driver for the DAC124S085 SPI DAC
*/
-#include <linux/gfp.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <asm/gpio.h>
#include <linux/module.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
struct lt3593_led_data {
struct led_classdev cdev;
#include <linux/module.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/mutex.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
/* LED select registers determine the source that drives LED outputs */
#define PCA955X_LS_LED_ON 0x0 /* Output LOW */
#include <linux/err.h>
#include <linux/pwm.h>
#include <linux/leds_pwm.h>
+#include <linux/slab.h>
struct led_pwm_data {
struct led_classdev cdev;
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/leds.h>
#include <linux/leds-regulator.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <linux/leds.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/fhc.h>
#include <asm/upa.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/err.h>
#include <linux/mfd/wm8350/pmic.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
/* Microamps */
static const int isink_cur[] = {
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/leds.h>
+#include <linux/slab.h>
#include "leds.h"
struct gpio_trig_data {
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/leds.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/leds.h>
+#include <linux/slab.h>
#include "leds.h"
struct timer_trig_data {
#include <linux/cpu.h>
#include <linux/freezer.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/paravirt.h>
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <linux/wait.h>
#include <linux/hrtimer.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/lguest.h>
#include <linux/interrupt.h>
#include <linux/virtio_ring.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/paravirt.h>
#include <asm/lguest_hcall.h>
/* We set the status. */
to_lgdev(vdev)->desc->status = status;
- kvm_hypercall1(LHCALL_NOTIFY, (max_pfn << PAGE_SHIFT) + offset);
+ hcall(LHCALL_NOTIFY, (max_pfn << PAGE_SHIFT) + offset, 0, 0, 0);
}
static void lg_set_status(struct virtio_device *vdev, u8 status)
*/
struct lguest_vq_info *lvq = vq->priv;
- kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
+ hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0, 0);
}
/* An extern declaration inside a C file is bad form. Don't do it. */
#include <linux/sched.h>
#include <linux/eventfd.h>
#include <linux/file.h>
+#include <linux/slab.h>
#include "lg.h"
/*L:056
/* Copyright (C) Rusty Russell IBM Corporation 2006.
* GPL v2 and any later version */
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/random.h>
/* Decoding x86 instructions is icky. */
insn = lgread(cpu, physaddr, u8);
+ /*
+ * Around 2.6.33, the kernel started using an emulation for the
+ * cmpxchg8b instruction in early boot on many configurations. This
+ * code isn't paravirtualized, and it tries to disable interrupts.
+ * Ignore it, which will Mostly Work.
+ */
+ if (insn == 0xfa) {
+ /* "cli", or Clear Interrupt Enable instruction. Skip it. */
+ cpu->regs->eip++;
+ return 1;
+ }
+
/*
* 0x66 is an "operand prefix". It means it's using the upper 16 bits
* of the eax register.
#include <linux/sysctl.h>
#include <linux/input.h>
#include <linux/module.h>
+#include <linux/slab.h>
MODULE_LICENSE("GPL");
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/i2c.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kthread.h>
#include <linux/of_platform.h>
#include <linux/miscdevice.h>
#include <linux/blkdev.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/kthread.h>
kref_init(&new_ct->ref);
list_add(&new_ct->link, &wf_controls);
+ sysfs_attr_init(&new_ct->attr.attr);
new_ct->attr.attr.name = new_ct->name;
new_ct->attr.attr.mode = 0644;
new_ct->attr.show = wf_show_control;
*/
#include <linux/bio.h>
+#include <linux/slab.h>
#include <linux/dm-dirty-log.h>
#include <linux/device-mapper.h>
#include <linux/dm-log-userspace.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/workqueue.h>
#include <linux/connector.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "dm.h"
#include "dm.h"
#include "dm-path-selector.h"
+#include <linux/slab.h>
+
#define DM_MSG_PREFIX "multipath service-time"
#define ST_MIN_IO 1
#define ST_MAX_RELATIVE_THROUGHPUT 100
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/bio.h>
-#include <linux/slab.h>
#define DM_MSG_PREFIX "target"
#define MaxFault 50
#include <linux/blkdev.h>
#include <linux/raid/md_u.h>
+#include <linux/slab.h>
#include "md.h"
#include <linux/seq_file.h>
#include <linux/blkdev.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "md.h"
#include "linear.h"
#include <linux/delay.h>
#include <linux/raid/md_p.h>
#include <linux/raid/md_u.h>
+#include <linux/slab.h>
#include "md.h"
#include "bitmap.h"
if (!mddev->in_sync || mddev->recovery_cp != MaxSector) { /* not clean */
/* .. if the array isn't clean, an 'even' event must also go
* to spares. */
- if ((mddev->events&1)==0)
+ if ((mddev->events&1)==0) {
nospares = 0;
+ sync_req = 2; /* force a second update to get the
+ * even/odd in sync */
+ }
} else {
/* otherwise an 'odd' event must go to spares */
- if ((mddev->events&1))
+ if ((mddev->events&1)) {
nospares = 0;
+ sync_req = 2; /* force a second update to get the
+ * even/odd in sync */
+ }
}
}
#include <linux/blkdev.h>
#include <linux/raid/md_u.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "md.h"
#include "multipath.h"
#include <linux/blkdev.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "md.h"
#include "raid0.h"
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/seq_file.h>
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include <linux/async.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
+#include <linux/slab.h>
#include "md.h"
#include "raid5.h"
#include "bitmap.h"
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
- if (conf->mddev->degraded)
+ if (conf->mddev->degraded >= conf->max_degraded)
printk_rl(KERN_WARNING
"raid5:%s: read error not correctable "
"(sector %llu on %s).\n",
int previous, int *dd_idx,
struct stripe_head *sh)
{
- long stripe;
- unsigned long chunk_number;
+ sector_t stripe, stripe2;
+ sector_t chunk_number;
unsigned int chunk_offset;
int pd_idx, qd_idx;
int ddf_layout = 0;
*/
chunk_offset = sector_div(r_sector, sectors_per_chunk);
chunk_number = r_sector;
- BUG_ON(r_sector != chunk_number);
/*
* Compute the stripe number
*/
- stripe = chunk_number / data_disks;
-
- /*
- * Compute the data disk and parity disk indexes inside the stripe
- */
- *dd_idx = chunk_number % data_disks;
-
+ stripe = chunk_number;
+ *dd_idx = sector_div(stripe, data_disks);
+ stripe2 = stripe;
/*
* Select the parity disk based on the user selected algorithm.
*/
case 5:
switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
- pd_idx = data_disks - stripe % raid_disks;
+ pd_idx = data_disks - sector_div(stripe2, raid_disks);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
break;
case ALGORITHM_RIGHT_ASYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
break;
case ALGORITHM_LEFT_SYMMETRIC:
- pd_idx = data_disks - stripe % raid_disks;
+ pd_idx = data_disks - sector_div(stripe2, raid_disks);
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
break;
case ALGORITHM_RIGHT_SYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
break;
case ALGORITHM_PARITY_0:
switch (algorithm) {
case ALGORITHM_LEFT_ASYMMETRIC:
- pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
(*dd_idx) += 2; /* D D P Q D */
break;
case ALGORITHM_RIGHT_ASYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
(*dd_idx) += 2; /* D D P Q D */
break;
case ALGORITHM_LEFT_SYMMETRIC:
- pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = (pd_idx + 1) % raid_disks;
*dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
break;
case ALGORITHM_RIGHT_SYMMETRIC:
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
qd_idx = (pd_idx + 1) % raid_disks;
*dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
break;
/* Exactly the same as RIGHT_ASYMMETRIC, but or
* of blocks for computing Q is different.
*/
- pd_idx = stripe % raid_disks;
+ pd_idx = sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
* D D D P Q rather than
* Q D D D P
*/
- pd_idx = raid_disks - 1 - ((stripe + 1) % raid_disks);
+ stripe2 += 1;
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = pd_idx + 1;
if (pd_idx == raid_disks-1) {
(*dd_idx)++; /* Q D D D P */
case ALGORITHM_ROTATING_N_CONTINUE:
/* Same as left_symmetric but Q is before P */
- pd_idx = raid_disks - 1 - (stripe % raid_disks);
+ pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
qd_idx = (pd_idx + raid_disks - 1) % raid_disks;
*dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
ddf_layout = 1;
case ALGORITHM_LEFT_ASYMMETRIC_6:
/* RAID5 left_asymmetric, with Q on last device */
- pd_idx = data_disks - stripe % (raid_disks-1);
+ pd_idx = data_disks - sector_div(stripe2, raid_disks-1);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
qd_idx = raid_disks - 1;
break;
case ALGORITHM_RIGHT_ASYMMETRIC_6:
- pd_idx = stripe % (raid_disks-1);
+ pd_idx = sector_div(stripe2, raid_disks-1);
if (*dd_idx >= pd_idx)
(*dd_idx)++;
qd_idx = raid_disks - 1;
break;
case ALGORITHM_LEFT_SYMMETRIC_6:
- pd_idx = data_disks - stripe % (raid_disks-1);
+ pd_idx = data_disks - sector_div(stripe2, raid_disks-1);
*dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
qd_idx = raid_disks - 1;
break;
case ALGORITHM_RIGHT_SYMMETRIC_6:
- pd_idx = stripe % (raid_disks-1);
+ pd_idx = sector_div(stripe2, raid_disks-1);
*dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
qd_idx = raid_disks - 1;
break;
: conf->algorithm;
sector_t stripe;
int chunk_offset;
- int chunk_number, dummy1, dd_idx = i;
+ sector_t chunk_number;
+ int dummy1, dd_idx = i;
sector_t r_sector;
struct stripe_head sh2;
chunk_offset = sector_div(new_sector, sectors_per_chunk);
stripe = new_sector;
- BUG_ON(new_sector != stripe);
if (i == sh->pd_idx)
return 0;
}
chunk_number = stripe * data_disks + i;
- r_sector = (sector_t)chunk_number * sectors_per_chunk + chunk_offset;
+ r_sector = chunk_number * sectors_per_chunk + chunk_offset;
check = raid5_compute_sector(conf, r_sector,
previous, &dummy1, &sh2);
*/
#include <linux/raid/pq.h>
+#include <linux/gfp.h>
#ifndef __KERNEL__
#include <sys/mman.h>
#include <stdio.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <media/ir-common.h>
#define IR_TAB_MIN_SIZE 32
* GNU General Public License for more details.
*/
+#include <linux/slab.h>
#include <linux/input.h>
#include <linux/device.h>
#include <media/ir-core.h>
}
}
-int saa7146_vv_devinit(struct saa7146_dev *dev)
-{
- return v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
-}
-EXPORT_SYMBOL_GPL(saa7146_vv_devinit);
-
int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv)
{
struct saa7146_vv *vv;
+ int err;
+
+ err = v4l2_device_register(&dev->pci->dev, &dev->v4l2_dev);
+ if (err)
+ return err;
vv = kzalloc(sizeof(struct saa7146_vv), GFP_KERNEL);
if (vv == NULL) {
/* ok, accept it */
vv->ov_fb = *fb;
vv->ov_fmt = fmt;
- if (0 == vv->ov_fb.fmt.bytesperline)
- vv->ov_fb.fmt.bytesperline =
- vv->ov_fb.fmt.width * fmt->depth / 8;
+
+ if (vv->ov_fb.fmt.bytesperline < vv->ov_fb.fmt.width) {
+ vv->ov_fb.fmt.bytesperline = vv->ov_fb.fmt.width * fmt->depth / 8;
+ DEB_D(("setting bytesperline to %d\n", vv->ov_fb.fmt.bytesperline));
+ }
mutex_unlock(&dev->lock);
return 0;
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
*/
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include "tuner-i2c.h"
#include "mt20xx.h"
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "mt2266.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/types.h>
#include <linux/dvb/frontend.h>
#include <linux/videodev2.h>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include "tuner-i2c.h"
#include <linux/types.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <media/tuner.h>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include "tuner-i2c.h"
#define __TUNER_I2C_H__
#include <linux/i2c.h>
+#include <linux/slab.h>
struct tuner_i2c_props {
u8 addr;
#include <linux/delay.h>
#include <media/tuner.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "tuner-i2c.h"
#include "tuner-xc2028.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <media/ir-common.h>
#include "demux.h"
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/dvb/dmx.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/dvb/frontend.h>
*/
#include <linux/hash.h>
+#include <linux/slab.h>
#include "af9015.h"
#include "af9013.h"
*/
#include <media/tuner.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include "cxusb.h"
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/bitops.h>
#include <linux/input.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include "dvb_frontend.h"
#include "au8522.h"
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_frontend.h"
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_frontend.h"
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_frontend.h"
* published by the Free Software Foundation, version 2.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_frontend.h"
* published by the Free Software Foundation, version 2.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_math.h"
* published by the Free Software Foundation, version 2.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include "dvb_math.h"
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <asm/div64.h>
#include "dvb_frontend.h"
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <asm/types.h>
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "dvb_frontend.h"
#include "lgdt3304.h"
#include <asm/div64.h>
#include <linux/dvb/frontend.h>
+#include <linux/slab.h>
#include "dvb_math.h"
#include "lgdt3305.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "mb86a16.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "dvb_frontend.h"
#include "s921_module.h"
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/dvb/frontend.h>
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <asm/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include "dvb_frontend.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/dvb/frontend.h>
if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0)
goto err;
+ /* workaround for stuck DiSEqC output */
+ if (config->diseqc_envelope_mode)
+ stv090x_send_diseqc_burst(fe, SEC_MINI_A);
+
return 0;
err:
dprintk(FE_ERROR, 1, "I/O error");
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include "dvb_frontend.h"
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "tda665x.h"
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "dvb_frontend.h"
#include "tda8261.h"
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <asm/types.h>
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
#include <asm/types.h>
#include <linux/module.h>
#include <linux/dvb/frontend.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include "zl10036.h"
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <linux/interrupt.h>
*/
#include <linux/signal.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/io.h>
#include <asm/div64.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include "demux.h"
#include "dmxdev.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/wait.h>
****************************************************************/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include "dmxdev.h"
*/
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/mmc/card.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include "smscoreapi.h"
#include "sms-cards.h"
#include <linux/crc32.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>
#include <linux/fs.h>
#include <linux/timer.h>
#include <linux/poll.h>
+#include <linux/gfp.h>
#include "av7110.h"
#include "av7110_hw.h"
&budget->i2c_adap,
&tt1600_isl6423_config);
- } else {
- dvb_frontend_detach(budget->dvb_frontend);
- budget->dvb_frontend = NULL;
}
}
break;
#include <linux/errno.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#include <linux/io.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <linux/pci.h>
#include <linux/videodev2.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <linux/videodev2.h>
#include <linux/version.h> /* for KERNEL_VERSION MACRO */
#include <linux/io.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
* add RDS support
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h> /* Initdata */
#include <linux/videodev2.h> /* kernel radio structs */
#include <media/v4l2-device.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <media/timb_radio.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
/* kernel includes */
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
/* kernel includes */
#include <linux/usb.h>
#include <linux/hid.h>
+#include <linux/slab.h>
#include "radio-si470x.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-common.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
+#include <linux/slab.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7191 video decoder.
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on PCI && VIDEO_V4L1 && I2C
+ depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o
obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o
-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
-
obj-$(CONFIG_VIDEO_AU0828) += au0828/
obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
+#include <linux/slab.h>
#include <media/v4l2-ioctl.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/device.h>
#include <linux/delay.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/mutex.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/suspend.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/suspend.h>
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include "bttvp.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include "bttv.h"
#include "bttvp.h"
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-chip-ident.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
* 02111-1307 USA
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "cx18-driver.h"
#include "cx18-cards.h"
#include <linux/pagemap.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <linux/dvb/video.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/usb.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "cx231xx.h"
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include "cx231xx.h"
#include <linux/i2c.h>
#include <linux/mm.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/version.h>
#include <linux/mm.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <media/cx2341x.h>
*/
#include <linux/input.h>
+#include <linux/slab.h>
#include <media/ir-common.h>
#include <media/v4l2-subdev.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include "cx23885.h"
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/kdev_t.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/tuner.h>
*/
#include <linux/kfifo.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <linux/vmalloc.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <sound/core.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "cx88.h"
#include "tea5767.h"
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/hrtimer.h>
#include <linux/input.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include "cx88.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/poll.h>
#include <linux/signal.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include "cx88.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
#include <linux/videodev2.h>
+#include <linux/gfp.h>
#include <linux/clk.h>
#include <linux/err.h>
* - Support for control ioctls
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
BUG_ON(!dev->hw_ops.get_frame_format);
BUG_ON(!dev->hw_ops.get_pixel_format);
BUG_ON(!dev->hw_ops.set_pixel_format);
- BUG_ON(!dev->hw_ops.set_params);
BUG_ON(!dev->hw_ops.set_image_window);
BUG_ON(!dev->hw_ops.get_image_window);
BUG_ON(!dev->hw_ops.get_line_length);
struct vpfe_device *vpfe_dev = video_drvdata(file);
int ret = 0;
- v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
+ v4l2_dbg(2, debug, &vpfe_dev->v4l2_dev, "vpfe_param_handler\n");
if (vpfe_dev->started) {
/* only allowed if streaming is not started */
- v4l2_err(&vpfe_dev->v4l2_dev, "device already started\n");
+ v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+ "device already started\n");
return -EBUSY;
}
case VPFE_CMD_S_CCDC_RAW_PARAMS:
v4l2_warn(&vpfe_dev->v4l2_dev,
"VPFE_CMD_S_CCDC_RAW_PARAMS: experimental ioctl\n");
- ret = ccdc_dev->hw_ops.set_params(param);
- if (ret) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "Error in setting parameters in CCDC\n");
- goto unlock_out;
- }
- if (vpfe_get_ccdc_image_format(vpfe_dev, &vpfe_dev->fmt) < 0) {
- v4l2_err(&vpfe_dev->v4l2_dev,
- "Invalid image format at CCDC\n");
- goto unlock_out;
+ if (ccdc_dev->hw_ops.set_params) {
+ ret = ccdc_dev->hw_ops.set_params(param);
+ if (ret) {
+ v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+ "Error setting parameters in CCDC\n");
+ goto unlock_out;
+ }
+ if (vpfe_get_ccdc_image_format(vpfe_dev,
+ &vpfe_dev->fmt) < 0) {
+ v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+ "Invalid image format at CCDC\n");
+ goto unlock_out;
+ }
+ } else {
+ ret = -EINVAL;
+ v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev,
+ "VPFE_CMD_S_CCDC_RAW_PARAMS not supported\n");
}
break;
default:
if (NULL == ccdc_cfg) {
v4l2_err(pdev->dev.driver,
"Memory allocation failed for ccdc_cfg\n");
- goto probe_free_dev_mem;
+ goto probe_free_lock;
}
strncpy(ccdc_cfg->name, vpfe_cfg->ccdc, 32);
probe_out_release_irq:
free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
probe_free_ccdc_cfg_mem:
- mutex_unlock(&ccdc_lock);
kfree(ccdc_cfg);
+probe_free_lock:
+ mutex_unlock(&ccdc_lock);
probe_free_dev_mem:
kfree(vpfe_dev);
return ret;
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/version.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/version.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/usb.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/vmalloc.h>
#include <media/v4l2-common.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "em28xx.h"
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include "em28xx.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include "em28xx.h"
#include <linux/version.h>
#include <linux/mm.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include "em28xx.h"
#include <media/v4l2-common.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
/* compilation option */
#define GSPCA_DEBUG 1
#define MODULE_NAME "jeilinj"
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include "gspca.h"
#include "jpeg.h"
*/
#include <linux/kthread.h>
+#include <linux/slab.h>
#include "m5602_s5k83a.h"
static int s5k83a_set_gain(struct gspca_dev *gspca_dev, __s32 val);
#include <linux/freezer.h>
#include <linux/usb/input.h>
#include <linux/input.h>
+#include <linux/slab.h>
#endif
#include "gspca.h"
struct gspca_dev *gspca_dev = (struct gspca_dev *)data;
struct sd *sd = (struct sd *) gspca_dev;
- DECLARE_WAIT_QUEUE_HEAD(wait);
+ DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait);
set_freezable();
for (;;) {
if (kthread_should_stop())
#define MODULE_NAME "sonixj"
#include <linux/input.h>
+#include <linux/slab.h>
#include "gspca.h"
#include "jpeg.h"
static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x0130, 0x0130), .driver_info = HamaUSBSightcam},
{USB_DEVICE(0x041e, 0x4018), .driver_info = CreativeVista},
- {USB_DEVICE(0x0461, 0x0815), .driver_info = MicroInnovationIC200},
{USB_DEVICE(0x0733, 0x0110), .driver_info = ViewQuestVQ110},
{USB_DEVICE(0x0af9, 0x0010), .driver_info = HamaUSBSightcam},
{USB_DEVICE(0x0af9, 0x0011), .driver_info = HamaUSBSightcam2},
{USB_DEVICE(0x041e, 0x401a), .driver_info = Rev072A},
{USB_DEVICE(0x041e, 0x403b), .driver_info = Rev012A},
{USB_DEVICE(0x0458, 0x7004), .driver_info = Rev072A},
+ {USB_DEVICE(0x0461, 0x0815), .driver_info = Rev072A},
{USB_DEVICE(0x046d, 0x0928), .driver_info = Rev012A},
{USB_DEVICE(0x046d, 0x0929), .driver_info = Rev012A},
{USB_DEVICE(0x046d, 0x092a), .driver_info = Rev012A},
#define MODULE_NAME "sq905"
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include "gspca.h"
MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>, "
#define MODULE_NAME "sq905c"
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include "gspca.h"
MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>");
{USB_DEVICE(0x046D, 0x08F5), .driver_info = BRIDGE_ST6422 },
/* QuickCam Messenger (new) */
{USB_DEVICE(0x046D, 0x08F6), .driver_info = BRIDGE_ST6422 },
- /* QuickCam Messenger (new) */
- {USB_DEVICE(0x046D, 0x08DA), .driver_info = BRIDGE_ST6422 },
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
#define MODULE_NAME "zc3xx"
#include <linux/input.h>
+#include <linux/slab.h>
#include "gspca.h"
#include "jpeg.h"
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "hdpvr.h"
DEB_EE((".\n"));
- ret = saa7146_vv_devinit(dev);
- if (ret)
- return ret;
hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL);
if (NULL == hexium) {
printk("hexium_gemini: not enough kernel memory in hexium_attach().\n");
return -EFAULT;
}
- err = saa7146_vv_devinit(dev);
- if (err)
- return err;
-
hexium = kzalloc(sizeof(struct hexium), GFP_KERNEL);
if (NULL == hexium) {
printk("hexium_orion: hexium_probe: not enough kernel memory.\n");
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "ivtv-driver.h"
#include "ivtv-cards.h"
#include <linux/scatterlist.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/byteorder.h>
#include <linux/kernel.h>
#include <linux/fb.h>
#include <linux/ivtvfb.h>
+#include <linux/slab.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/videodev.h>
+#include <linux/gfp.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/freezer.h>
#include <linux/videodev2.h>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
#include <asm/div64.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include <linux/version.h>
#include <linux/videodev2.h>
/*
* CSI registers
*/
-#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */
-#define DMA_DIMR 0x08 /* Interrupt mask Register */
#define CSICR1 0x00 /* CSI Control Register 1 */
#define CSISR 0x08 /* CSI Status Register */
#define CSIRXR 0x10 /* CSI RxFIFO Register */
pcdev);
imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
- IMX_DMA_MEMSIZE_32, DMA_REQ_CSI_R, 0);
+ IMX_DMA_MEMSIZE_32, MX1_DMA_REQ_CSI_R, 0);
/* burst length : 16 words = 64 bytes */
imx_dma_config_burstlen(pcdev->dma_chan, 0);
set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
&mx1_camera_sof_fiq_start);
- regs.ARM_r8 = DMA_BASE + DMA_DIMR;
- regs.ARM_r9 = DMA_BASE + DMA_CCR(pcdev->dma_chan);
+ regs.ARM_r8 = (long)MX1_DMA_DIMR;
+ regs.ARM_r9 = (long)MX1_DMA_CCR(pcdev->dma_chan);
regs.ARM_r10 = (long)pcdev->base + CSICR1;
regs.ARM_fp = (long)pcdev->base + CSISR;
regs.ARM_sp = 1 << pcdev->dma_chan;
static int mxb_probe(struct saa7146_dev *dev)
{
struct mxb *mxb = NULL;
- int err;
- err = saa7146_vv_devinit(dev);
- if (err)
- return err;
mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL);
if (mxb == NULL) {
DEB_D(("not enough kernel memory.\n"));
/* this function only gets called when the probing was successful */
static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
{
- struct mxb *mxb = (struct mxb *)dev->ext_priv;
+ struct mxb *mxb;
DEB_EE(("dev:%p\n", dev));
- /* checking for i2c-devices can be omitted here, because we
- already did this in "mxb_vl42_probe" */
-
saa7146_vv_init(dev, &vv_data);
+ if (mxb_probe(dev)) {
+ saa7146_vv_release(dev);
+ return -1;
+ }
+ mxb = (struct mxb *)dev->ext_priv;
+
vv_data.ops.vidioc_queryctrl = vidioc_queryctrl;
vv_data.ops.vidioc_g_ctrl = vidioc_g_ctrl;
vv_data.ops.vidioc_s_ctrl = vidioc_s_ctrl;
vv_data.ops.vidioc_default = vidioc_default;
if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) {
ERR(("cannot register capture v4l2 device. skipping.\n"));
+ saa7146_vv_release(dev);
return -1;
}
.pci_tbl = &pci_tbl[0],
.module = THIS_MODULE,
- .probe = mxb_probe,
.attach = mxb_attach,
.detach = mxb_detach,
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
}
size = 0;
- for (i = first; i <= last; i++) {
+ for (i = first; i <= last && i < VIDEO_MAX_FRAME; i++) {
struct videobuf_dmabuf *dma = videobuf_to_dma(vbq->bufs[i]);
for (j = 0; j < dma->sglen; j++) {
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/errno.h>
-#include <linux/slab.h>
struct routing_scheme {
const int *def;
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/errno.h>
-#include <linux/slab.h>
struct routing_scheme_item {
*/
#include <linux/string.h>
-#include <linux/slab.h>
#include "pvrusb2-debugifc.h"
#include "pvrusb2-hdw.h"
#include "pvrusb2-debug.h"
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include "dvbdev.h"
#include "pvrusb2-debug.h"
*
*/
+#include <linux/slab.h>
#include "pvrusb2-eeprom.h"
#include "pvrusb2-hdw-internal.h"
#include "pvrusb2-debug.h"
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
dip = kzalloc(sizeof(*dip),GFP_KERNEL);
if (!dip) return;
+ sysfs_attr_init(&dip->attr_debugcmd.attr);
dip->attr_debugcmd.attr.name = "debugcmd";
dip->attr_debugcmd.attr.mode = S_IRUGO|S_IWUSR|S_IWGRP;
dip->attr_debugcmd.show = debugcmd_show;
dip->attr_debugcmd.store = debugcmd_store;
+ sysfs_attr_init(&dip->attr_debuginfo.attr);
dip->attr_debuginfo.attr.name = "debuginfo";
dip->attr_debuginfo.attr.mode = S_IRUGO;
dip->attr_debuginfo.show = debuginfo_show;
return;
}
+ sysfs_attr_init(&sfp->attr_v4l_minor_number.attr);
sfp->attr_v4l_minor_number.attr.name = "v4l_minor_number";
sfp->attr_v4l_minor_number.attr.mode = S_IRUGO;
sfp->attr_v4l_minor_number.show = v4l_minor_number_show;
sfp->v4l_minor_number_created_ok = !0;
}
+ sysfs_attr_init(&sfp->attr_v4l_radio_minor_number.attr);
sfp->attr_v4l_radio_minor_number.attr.name = "v4l_radio_minor_number";
sfp->attr_v4l_radio_minor_number.attr.mode = S_IRUGO;
sfp->attr_v4l_radio_minor_number.show = v4l_radio_minor_number_show;
sfp->v4l_radio_minor_number_created_ok = !0;
}
+ sysfs_attr_init(&sfp->attr_unit_number.attr);
sfp->attr_unit_number.attr.name = "unit_number";
sfp->attr_unit_number.attr.mode = S_IRUGO;
sfp->attr_unit_number.show = unit_number_show;
sfp->unit_number_created_ok = !0;
}
+ sysfs_attr_init(&sfp->attr_bus_info.attr);
sfp->attr_bus_info.attr.name = "bus_info_str";
sfp->attr_bus_info.attr.mode = S_IRUGO;
sfp->attr_bus_info.show = bus_info_show;
sfp->bus_info_created_ok = !0;
}
+ sysfs_attr_init(&sfp->attr_hdw_name.attr);
sfp->attr_hdw_name.attr.name = "device_hardware_type";
sfp->attr_hdw_name.attr.mode = S_IRUGO;
sfp->attr_hdw_name.show = hdw_name_show;
sfp->hdw_name_created_ok = !0;
}
+ sysfs_attr_init(&sfp->attr_hdw_desc.attr);
sfp->attr_hdw_desc.attr.name = "device_hardware_description";
sfp->attr_hdw_desc.attr.mode = S_IRUGO;
sfp->attr_hdw_desc.show = hdw_desc_show;
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include "pvrusb2-context.h"
#include "pvrusb2-hdw.h"
#include <media/v4l2-common.h>
#include <media/saa7115.h>
#include <linux/errno.h>
-#include <linux/slab.h>
struct routing_scheme {
const int *def;
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/errno.h>
-#include <linux/slab.h>
void pvr2_wm8775_subdev_update(struct pvr2_hdw *hdw, struct v4l2_subdev *sd)
{
#include <media/pwc-ioctl.h>
#include <linux/string.h>
+#include <linux/slab.h>
/*
* USE_LOOKUP_TABLE_TO_CLAMP
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/poll.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/io.h>
#include <linux/version.h>
#include <linux/mutex.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <asm/errno.h>
#include <linux/videodev.h>
#include <media/v4l2-common.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
*/
static void pxa_camera_start_capture(struct pxa_camera_dev *pcdev)
{
- unsigned long cicr0, cifr;
+ unsigned long cicr0;
dev_dbg(pcdev->soc_host.v4l2_dev.dev, "%s\n", __func__);
- /* Reset the FIFOs */
- cifr = __raw_readl(pcdev->base + CIFR) | CIFR_RESET_F;
- __raw_writel(cifr, pcdev->base + CIFR);
/* Enable End-Of-Frame Interrupt */
cicr0 = __raw_readl(pcdev->base + CICR0) | CICR0_ENB;
cicr0 &= ~CICR0_EOFM;
static irqreturn_t pxa_camera_irq(int irq, void *data)
{
struct pxa_camera_dev *pcdev = data;
- unsigned long status, cicr0;
+ unsigned long status, cifr, cicr0;
struct pxa_buffer *buf;
struct videobuf_buffer *vb;
__raw_writel(status, pcdev->base + CISR);
if (status & CISR_EOF) {
+ /* Reset the FIFOs */
+ cifr = __raw_readl(pcdev->base + CIFR) | CIFR_RESET_F;
+ __raw_writel(cifr, pcdev->base + CIFR);
+
pcdev->active = list_first_entry(&pcdev->capture,
struct pxa_buffer, vb.queue);
vb = &pcdev->active->vb;
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/version.h>
#include <linux/mm.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/videotext.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
#include <linux/videotext.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ioctl.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/suspend.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include "saa7134-reg.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include "saa7134-reg.h"
#include "saa7134.h"
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include "saa7134-reg.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/freezer.h>
#include <asm/div64.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include "saa7134-reg.h"
#include "saa7134.h"
*/
#include <linux/wait.h>
+#include <linux/slab.h>
#include "saa7164.h"
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
+
#include "saa7164.h"
/* The PCI address space for buffer handling looks like this:
*/
#include <linux/firmware.h>
+#include <linux/slab.h>
#include "saa7164.h"
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/videodev2.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/moduleparam.h>
#include <linux/time.h>
#include <linux/version.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/videodev2.h>
height = pix->height;
pix->bytesperline = soc_mbus_bytes_per_line(width, xlate->host_fmt);
- if (pix->bytesperline < 0)
+ if ((int)pix->bytesperline < 0)
return pix->bytesperline;
pix->sizeimage = height * pix->bytesperline;
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <media/soc_camera.h>
#include <linux/module.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <linux/module.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <linux/module.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/sound.h>
#include <linux/spinlock.h>
#include <linux/soundcard.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/usb.h>
#include <linux/dvb/dmx.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include "vendorcmds.h"
#include <linux/sched.h>
#include <linux/usb.h>
#include <linux/mm.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-dev.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
#include <media/v4l2-device.h>
*/
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/tvp7002.h>
#include <media/v4l2-device.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb/input.h>
+#include <linux/gfp.h>
#include "usbvideo.h"
#include <linux/init.h>
#include <linux/input.h>
#include <linux/usb/input.h>
+#include <linux/slab.h>
#include "usbvideo.h"
#include "quickcam_messenger.h"
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/timer.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
#include <linux/version.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
#include <linux/vmalloc.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/pagemap.h>
#include <linux/dma-mapping.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <media/videobuf-dma-contig.h>
struct videobuf_dma_contig_memory {
#include <linux/fs.h>
#include <linux/kthread.h>
#include <linux/file.h>
+#include <linux/slab.h>
#include <linux/freezer.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/time.h>
#include <linux/version.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/videodev.h>
+#include <linux/slab.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/parport.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <asm/uaccess.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/i2c.h>
#include <linux/idr.h>
#include <linux/fs.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#define DRIVER_NAME "memstick"
#include <linux/hdreg.h>
#include <linux/kthread.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/memstick.h>
#define DRIVER_NAME "mspro_block"
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/memstick.h>
+#include <linux/slab.h>
#define DRIVER_NAME "jmb38x_ms"
#include <linux/reboot.h> /* notifier code */
#include <linux/workqueue.h>
#include <linux/sort.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#define my_VERSION MPT_LINUX_VERSION_COMMON
#define MYNAM "mptlan"
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kdev_t.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kdev_t.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/i2o.h>
#include <linux/mempool.h>
#include <linux/miscdevice.h>
#include <linux/smp_lock.h>
#include <linux/compat.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/i2o.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/i2o.h>
#include <linux/delay.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "core.h"
#define OSM_NAME "i2o"
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/i2o.h>
#include "core.h"
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/slab.h>
static inline int pm860x_read_device(struct i2c_client *i2c,
int reg, int bytes, void *dest)
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/notifier.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mfd/ab3100.h>
* Interrupt management to be added - TODO.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/err.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/mfd/da903x.h>
+#include <linux/slab.h>
#define DA9030_CHIP_ID 0x00
#define DA9030_EVENT_A 0x01
#include <linux/mfd/ezx-pcap.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#define PCAP_ADC_MAXQ 8
struct pcap_adc_request {
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mfd/htc-egpio.h>
#include <linux/spinlock.h>
#include <linux/htcpld.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
struct htcpld_chip {
spinlock_t lock;
#include <linux/mfd/core.h>
#include <linux/mfd/ds1wm.h>
#include <linux/mfd/htc-pasic3.h>
+#include <linux/slab.h>
struct pasic3_data {
void __iomem *mapping;
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/mfd/max8925.h>
+#include <linux/slab.h>
#define RTC_I2C_ADDR 0x68
#define ADC_I2C_ADDR 0x47
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/mfd/core.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
-#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/mfd/mcp.h>
#include <linux/delay.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#include <asm/mach/irq.h>
#include <linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/mfd/core.h>
+#include <linux/slab.h>
static int mfd_add_device(struct device *parent, int id,
const struct mfd_cell *cell,
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/mfd/pcf50633/core.h>
#include <linux/kernel.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/mmc/host.h>
#include <linux/mfd/core.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/i2c-gpio.h>
+#include <linux/slab.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tmio.h>
#include <linux/mfd/tc6387xb.h>
+#include <linux/slab.h>
enum {
TC6387XB_CELL_MMC,
#include <linux/mfd/tmio.h>
#include <linux/mfd/tc6393xb.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#define SCR_REVID 0x08 /* b Revision ID */
#define SCR_ISR 0x50 /* b Interrupt Status */
#include <linux/pci.h>
#include <linux/msi.h>
#include <linux/mfd/core.h>
+#include <linux/slab.h>
#include <linux/timb_gpio.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <linux/i2c/twl.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/ucb1400.h>
unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/mfd/wm8350/core.h>
+#include <linux/slab.h>
static int wm8350_i2c_read_device(struct wm8350 *wm8350, char reg,
int bytes, void *dest)
#include <linux/mfd/core.h>
#include <linux/mfd/wm8400-private.h>
#include <linux/mfd/wm8400-audio.h>
+#include <linux/slab.h>
static struct {
u16 readable; /* Mask of readable bits */
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
This driver can also be built as a module. If so, the module
will be calles ti_dac7512.
+config VMWARE_BALLOON
+ tristate "VMware Balloon Driver"
+ depends on X86
+ help
+ This is VMware physical memory management driver which acts
+ like a "balloon" that can be inflated to reclaim physical pages
+ by reserving them in the guest and invalidating them in the
+ monitor, freeing up the underlying machine pages so they can
+ be allocated to other guests. The balloon can also be deflated
+ to allow the guest to use more physical memory.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vmware_balloon.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/
obj-y += eeprom/
obj-y += cb710/
+obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o
#include <linux/io.h>
#include <linux/spinlock.h>
#include <linux/atmel-ssc.h>
+#include <linux/slab.h>
/* Serialize access to ssc_list and user count */
static DEFINE_SPINLOCK(user_lock);
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
/* Number of bytes to reserve for the iomem resource */
#define ATMEL_TC_IOMEM_SIZE 256
#include <linux/delay.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/c2port.h>
c2dev->dev = device_create(c2port_class, NULL, 0, c2dev,
"c2port%d", id);
- if (unlikely(!c2dev->dev)) {
- ret = -ENOMEM;
+ if (unlikely(IS_ERR(c2dev->dev))) {
+ ret = PTR_ERR(c2dev->dev);
goto error_device_create;
}
dev_set_drvdata(c2dev->dev, c2dev);
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
#include <linux/cb710.h>
+#include <linux/gfp.h>
static DEFINE_IDA(cb710_ida);
static DEFINE_SPINLOCK(cb710_ida_lock);
#include <linux/cb710.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#define CB710_REG_COUNT 0x80
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/cs5535.h>
+#include <linux/slab.h>
#define DRV_NAME "cs5535-mfgpt"
#define MFGPT_BAR 2
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
static LIST_HEAD(container_list);
static DEFINE_MUTEX(container_list_lock);
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/io.h>
#include <linux/wait.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include "hpilo.h"
static struct class *ilo_class;
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ibmasm.h"
#include "lowlevel.h"
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ibmasm.h"
#include "lowlevel.h"
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include "ibmasm.h"
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include "ibmasm.h"
#include "lowlevel.h"
#include "remote.h"
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/log2.h>
+#include <linux/slab.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END };
#include <linux/pci.h>
#include <linux/ioc4.h>
#include <linux/ktime.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/time.h>
#include <asm/io.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/mmc/sdio_func.h>
#include <linux/firmware.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "iwmc3200top.h"
#include <linux/kernel.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
#include <linux/ctype.h>
#include "fw-msg.h"
#include "iwmc3200top.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/debugfs.h>
/* On x86 a breakpoint stop requires it to be decremented */
if (addr + 1 == kgdbts_regs.ip)
offset = -1;
+#elif defined(CONFIG_SUPERH)
+ /* On SUPERH a breakpoint stop requires it to be decremented */
+ if (addr + 2 == kgdbts_regs.pc)
+ offset = -2;
#endif
if (strcmp(arg, "silent") &&
instruction_pointer(&kgdbts_regs) + offset != addr) {
#ifdef CONFIG_X86
/* On x86 adjust the instruction pointer if needed */
kgdbts_regs.ip += offset;
+#elif defined(CONFIG_SUPERH)
+ kgdbts_regs.pc += offset;
#endif
return 0;
}
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/hrtimer.h>
+#include <linux/slab.h>
#include <scsi/scsi_cmnd.h>
#include <linux/debugfs.h>
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/cdev.h>
+#include <linux/slab.h>
#include <linux/phantom.h>
#include <linux/sched.h>
#include <linux/smp_lock.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/hardirq.h>
+#include <linux/slab.h>
#include "xpc.h"
#include <asm/uv/uv_hub.h>
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/uncached.h>
#include <asm/sn/mspec.h>
#include <asm/sn/sn_sal.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/uv/uv_hub.h>
#if defined CONFIG_X86_64
#include <asm/uv/bios.h>
*
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
*/
#include <linux/tifm.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/idr.h>
--- /dev/null
+/*
+ * VMware Balloon driver.
+ *
+ * Copyright (C) 2000-2010, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained by: Dmitry Torokhov <dtor@vmware.com>
+ */
+
+/*
+ * This is VMware physical memory management driver for Linux. The driver
+ * acts like a "balloon" that can be inflated to reclaim physical pages by
+ * reserving them in the guest and invalidating them in the monitor,
+ * freeing up the underlying machine pages so they can be allocated to
+ * other guests. The balloon can also be deflated to allow the guest to
+ * use more physical memory. Higher level policies can control the sizes
+ * of balloons in VMs in order to manage physical memory resources.
+ */
+
+//#define DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/vmware.h>
+
+MODULE_AUTHOR("VMware, Inc.");
+MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
+MODULE_VERSION("1.2.1.0-K");
+MODULE_ALIAS("dmi:*:svnVMware*:*");
+MODULE_ALIAS("vmware_vmmemctl");
+MODULE_LICENSE("GPL");
+
+/*
+ * Various constants controlling rate of inflaint/deflating balloon,
+ * measured in pages.
+ */
+
+/*
+ * Rate of allocating memory when there is no memory pressure
+ * (driver performs non-sleeping allocations).
+ */
+#define VMW_BALLOON_NOSLEEP_ALLOC_MAX 16384U
+
+/*
+ * Rates of memory allocaton when guest experiences memory pressure
+ * (driver performs sleeping allocations).
+ */
+#define VMW_BALLOON_RATE_ALLOC_MIN 512U
+#define VMW_BALLOON_RATE_ALLOC_MAX 2048U
+#define VMW_BALLOON_RATE_ALLOC_INC 16U
+
+/*
+ * Rates for releasing pages while deflating balloon.
+ */
+#define VMW_BALLOON_RATE_FREE_MIN 512U
+#define VMW_BALLOON_RATE_FREE_MAX 16384U
+#define VMW_BALLOON_RATE_FREE_INC 16U
+
+/*
+ * When guest is under memory pressure, use a reduced page allocation
+ * rate for next several cycles.
+ */
+#define VMW_BALLOON_SLOW_CYCLES 4
+
+/*
+ * Use __GFP_HIGHMEM to allow pages from HIGHMEM zone. We don't
+ * allow wait (__GFP_WAIT) for NOSLEEP page allocations. Use
+ * __GFP_NOWARN, to suppress page allocation failure warnings.
+ */
+#define VMW_PAGE_ALLOC_NOSLEEP (__GFP_HIGHMEM|__GFP_NOWARN)
+
+/*
+ * Use GFP_HIGHUSER when executing in a separate kernel thread
+ * context and allocation can sleep. This is less stressful to
+ * the guest memory system, since it allows the thread to block
+ * while memory is reclaimed, and won't take pages from emergency
+ * low-memory pools.
+ */
+#define VMW_PAGE_ALLOC_CANSLEEP (GFP_HIGHUSER)
+
+/* Maximum number of page allocations without yielding processor */
+#define VMW_BALLOON_YIELD_THRESHOLD 1024
+
+
+/*
+ * Hypervisor communication port definitions.
+ */
+#define VMW_BALLOON_HV_PORT 0x5670
+#define VMW_BALLOON_HV_MAGIC 0x456c6d6f
+#define VMW_BALLOON_PROTOCOL_VERSION 2
+#define VMW_BALLOON_GUEST_ID 1 /* Linux */
+
+#define VMW_BALLOON_CMD_START 0
+#define VMW_BALLOON_CMD_GET_TARGET 1
+#define VMW_BALLOON_CMD_LOCK 2
+#define VMW_BALLOON_CMD_UNLOCK 3
+#define VMW_BALLOON_CMD_GUEST_ID 4
+
+/* error codes */
+#define VMW_BALLOON_SUCCESS 0
+#define VMW_BALLOON_FAILURE -1
+#define VMW_BALLOON_ERROR_CMD_INVALID 1
+#define VMW_BALLOON_ERROR_PPN_INVALID 2
+#define VMW_BALLOON_ERROR_PPN_LOCKED 3
+#define VMW_BALLOON_ERROR_PPN_UNLOCKED 4
+#define VMW_BALLOON_ERROR_PPN_PINNED 5
+#define VMW_BALLOON_ERROR_PPN_NOTNEEDED 6
+#define VMW_BALLOON_ERROR_RESET 7
+#define VMW_BALLOON_ERROR_BUSY 8
+
+#define VMWARE_BALLOON_CMD(cmd, data, result) \
+({ \
+ unsigned long __stat, __dummy1, __dummy2; \
+ __asm__ __volatile__ ("inl (%%dx)" : \
+ "=a"(__stat), \
+ "=c"(__dummy1), \
+ "=d"(__dummy2), \
+ "=b"(result) : \
+ "0"(VMW_BALLOON_HV_MAGIC), \
+ "1"(VMW_BALLOON_CMD_##cmd), \
+ "2"(VMW_BALLOON_HV_PORT), \
+ "3"(data) : \
+ "memory"); \
+ result &= -1UL; \
+ __stat & -1UL; \
+})
+
+#ifdef CONFIG_DEBUG_FS
+struct vmballoon_stats {
+ unsigned int timer;
+
+ /* allocation statustics */
+ unsigned int alloc;
+ unsigned int alloc_fail;
+ unsigned int sleep_alloc;
+ unsigned int sleep_alloc_fail;
+ unsigned int refused_alloc;
+ unsigned int refused_free;
+ unsigned int free;
+
+ /* monitor operations */
+ unsigned int lock;
+ unsigned int lock_fail;
+ unsigned int unlock;
+ unsigned int unlock_fail;
+ unsigned int target;
+ unsigned int target_fail;
+ unsigned int start;
+ unsigned int start_fail;
+ unsigned int guest_type;
+ unsigned int guest_type_fail;
+};
+
+#define STATS_INC(stat) (stat)++
+#else
+#define STATS_INC(stat)
+#endif
+
+struct vmballoon {
+
+ /* list of reserved physical pages */
+ struct list_head pages;
+
+ /* transient list of non-balloonable pages */
+ struct list_head refused_pages;
+
+ /* balloon size in pages */
+ unsigned int size;
+ unsigned int target;
+
+ /* reset flag */
+ bool reset_required;
+
+ /* adjustment rates (pages per second) */
+ unsigned int rate_alloc;
+ unsigned int rate_free;
+
+ /* slowdown page allocations for next few cycles */
+ unsigned int slow_allocation_cycles;
+
+#ifdef CONFIG_DEBUG_FS
+ /* statistics */
+ struct vmballoon_stats stats;
+
+ /* debugfs file exporting statistics */
+ struct dentry *dbg_entry;
+#endif
+
+ struct sysinfo sysinfo;
+
+ struct delayed_work dwork;
+};
+
+static struct vmballoon balloon;
+static struct workqueue_struct *vmballoon_wq;
+
+/*
+ * Send "start" command to the host, communicating supported version
+ * of the protocol.
+ */
+static bool vmballoon_send_start(struct vmballoon *b)
+{
+ unsigned long status, dummy;
+
+ STATS_INC(b->stats.start);
+
+ status = VMWARE_BALLOON_CMD(START, VMW_BALLOON_PROTOCOL_VERSION, dummy);
+ if (status == VMW_BALLOON_SUCCESS)
+ return true;
+
+ pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+ STATS_INC(b->stats.start_fail);
+ return false;
+}
+
+static bool vmballoon_check_status(struct vmballoon *b, unsigned long status)
+{
+ switch (status) {
+ case VMW_BALLOON_SUCCESS:
+ return true;
+
+ case VMW_BALLOON_ERROR_RESET:
+ b->reset_required = true;
+ /* fall through */
+
+ default:
+ return false;
+ }
+}
+
+/*
+ * Communicate guest type to the host so that it can adjust ballooning
+ * algorithm to the one most appropriate for the guest. This command
+ * is normally issued after sending "start" command and is part of
+ * standard reset sequence.
+ */
+static bool vmballoon_send_guest_id(struct vmballoon *b)
+{
+ unsigned long status, dummy;
+
+ status = VMWARE_BALLOON_CMD(GUEST_ID, VMW_BALLOON_GUEST_ID, dummy);
+
+ STATS_INC(b->stats.guest_type);
+
+ if (vmballoon_check_status(b, status))
+ return true;
+
+ pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+ STATS_INC(b->stats.guest_type_fail);
+ return false;
+}
+
+/*
+ * Retrieve desired balloon size from the host.
+ */
+static bool vmballoon_send_get_target(struct vmballoon *b, u32 *new_target)
+{
+ unsigned long status;
+ unsigned long target;
+ unsigned long limit;
+ u32 limit32;
+
+ /*
+ * si_meminfo() is cheap. Moreover, we want to provide dynamic
+ * max balloon size later. So let us call si_meminfo() every
+ * iteration.
+ */
+ si_meminfo(&b->sysinfo);
+ limit = b->sysinfo.totalram;
+
+ /* Ensure limit fits in 32-bits */
+ limit32 = (u32)limit;
+ if (limit != limit32)
+ return false;
+
+ /* update stats */
+ STATS_INC(b->stats.target);
+
+ status = VMWARE_BALLOON_CMD(GET_TARGET, limit, target);
+ if (vmballoon_check_status(b, status)) {
+ *new_target = target;
+ return true;
+ }
+
+ pr_debug("%s - failed, hv returns %ld\n", __func__, status);
+ STATS_INC(b->stats.target_fail);
+ return false;
+}
+
+/*
+ * Notify the host about allocated page so that host can use it without
+ * fear that guest will need it. Host may reject some pages, we need to
+ * check the return value and maybe submit a different page.
+ */
+static bool vmballoon_send_lock_page(struct vmballoon *b, unsigned long pfn)
+{
+ unsigned long status, dummy;
+ u32 pfn32;
+
+ pfn32 = (u32)pfn;
+ if (pfn32 != pfn)
+ return false;
+
+ STATS_INC(b->stats.lock);
+
+ status = VMWARE_BALLOON_CMD(LOCK, pfn, dummy);
+ if (vmballoon_check_status(b, status))
+ return true;
+
+ pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
+ STATS_INC(b->stats.lock_fail);
+ return false;
+}
+
+/*
+ * Notify the host that guest intends to release given page back into
+ * the pool of available (to the guest) pages.
+ */
+static bool vmballoon_send_unlock_page(struct vmballoon *b, unsigned long pfn)
+{
+ unsigned long status, dummy;
+ u32 pfn32;
+
+ pfn32 = (u32)pfn;
+ if (pfn32 != pfn)
+ return false;
+
+ STATS_INC(b->stats.unlock);
+
+ status = VMWARE_BALLOON_CMD(UNLOCK, pfn, dummy);
+ if (vmballoon_check_status(b, status))
+ return true;
+
+ pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
+ STATS_INC(b->stats.unlock_fail);
+ return false;
+}
+
+/*
+ * Quickly release all pages allocated for the balloon. This function is
+ * called when host decides to "reset" balloon for one reason or another.
+ * Unlike normal "deflate" we do not (shall not) notify host of the pages
+ * being released.
+ */
+static void vmballoon_pop(struct vmballoon *b)
+{
+ struct page *page, *next;
+ unsigned int count = 0;
+
+ list_for_each_entry_safe(page, next, &b->pages, lru) {
+ list_del(&page->lru);
+ __free_page(page);
+ STATS_INC(b->stats.free);
+ b->size--;
+
+ if (++count >= b->rate_free) {
+ count = 0;
+ cond_resched();
+ }
+ }
+}
+
+/*
+ * Perform standard reset sequence by popping the balloon (in case it
+ * is not empty) and then restarting protocol. This operation normally
+ * happens when host responds with VMW_BALLOON_ERROR_RESET to a command.
+ */
+static void vmballoon_reset(struct vmballoon *b)
+{
+ /* free all pages, skipping monitor unlock */
+ vmballoon_pop(b);
+
+ if (vmballoon_send_start(b)) {
+ b->reset_required = false;
+ if (!vmballoon_send_guest_id(b))
+ pr_err("failed to send guest ID to the host\n");
+ }
+}
+
+/*
+ * Allocate (or reserve) a page for the balloon and notify the host. If host
+ * refuses the page put it on "refuse" list and allocate another one until host
+ * is satisfied. "Refused" pages are released at the end of inflation cycle
+ * (when we allocate b->rate_alloc pages).
+ */
+static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep)
+{
+ struct page *page;
+ gfp_t flags;
+ bool locked = false;
+
+ do {
+ if (!can_sleep)
+ STATS_INC(b->stats.alloc);
+ else
+ STATS_INC(b->stats.sleep_alloc);
+
+ flags = can_sleep ? VMW_PAGE_ALLOC_CANSLEEP : VMW_PAGE_ALLOC_NOSLEEP;
+ page = alloc_page(flags);
+ if (!page) {
+ if (!can_sleep)
+ STATS_INC(b->stats.alloc_fail);
+ else
+ STATS_INC(b->stats.sleep_alloc_fail);
+ return -ENOMEM;
+ }
+
+ /* inform monitor */
+ locked = vmballoon_send_lock_page(b, page_to_pfn(page));
+ if (!locked) {
+ if (b->reset_required) {
+ __free_page(page);
+ return -EIO;
+ }
+
+ /* place on list of non-balloonable pages, retry allocation */
+ list_add(&page->lru, &b->refused_pages);
+ STATS_INC(b->stats.refused_alloc);
+ }
+ } while (!locked);
+
+ /* track allocated page */
+ list_add(&page->lru, &b->pages);
+
+ /* update balloon size */
+ b->size++;
+
+ return 0;
+}
+
+/*
+ * Release the page allocated for the balloon. Note that we first notify
+ * the host so it can make sure the page will be available for the guest
+ * to use, if needed.
+ */
+static int vmballoon_release_page(struct vmballoon *b, struct page *page)
+{
+ if (!vmballoon_send_unlock_page(b, page_to_pfn(page)))
+ return -EIO;
+
+ list_del(&page->lru);
+
+ /* deallocate page */
+ __free_page(page);
+ STATS_INC(b->stats.free);
+
+ /* update balloon size */
+ b->size--;
+
+ return 0;
+}
+
+/*
+ * Release pages that were allocated while attempting to inflate the
+ * balloon but were refused by the host for one reason or another.
+ */
+static void vmballoon_release_refused_pages(struct vmballoon *b)
+{
+ struct page *page, *next;
+
+ list_for_each_entry_safe(page, next, &b->refused_pages, lru) {
+ list_del(&page->lru);
+ __free_page(page);
+ STATS_INC(b->stats.refused_free);
+ }
+}
+
+/*
+ * Inflate the balloon towards its target size. Note that we try to limit
+ * the rate of allocation to make sure we are not choking the rest of the
+ * system.
+ */
+static void vmballoon_inflate(struct vmballoon *b)
+{
+ unsigned int goal;
+ unsigned int rate;
+ unsigned int i;
+ unsigned int allocations = 0;
+ int error = 0;
+ bool alloc_can_sleep = false;
+
+ pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target);
+
+ /*
+ * First try NOSLEEP page allocations to inflate balloon.
+ *
+ * If we do not throttle nosleep allocations, we can drain all
+ * free pages in the guest quickly (if the balloon target is high).
+ * As a side-effect, draining free pages helps to inform (force)
+ * the guest to start swapping if balloon target is not met yet,
+ * which is a desired behavior. However, balloon driver can consume
+ * all available CPU cycles if too many pages are allocated in a
+ * second. Therefore, we throttle nosleep allocations even when
+ * the guest is not under memory pressure. OTOH, if we have already
+ * predicted that the guest is under memory pressure, then we
+ * slowdown page allocations considerably.
+ */
+
+ goal = b->target - b->size;
+ /*
+ * Start with no sleep allocation rate which may be higher
+ * than sleeping allocation rate.
+ */
+ rate = b->slow_allocation_cycles ?
+ b->rate_alloc : VMW_BALLOON_NOSLEEP_ALLOC_MAX;
+
+ pr_debug("%s - goal: %d, no-sleep rate: %d, sleep rate: %d\n",
+ __func__, goal, rate, b->rate_alloc);
+
+ for (i = 0; i < goal; i++) {
+
+ error = vmballoon_reserve_page(b, alloc_can_sleep);
+ if (error) {
+ if (error != -ENOMEM) {
+ /*
+ * Not a page allocation failure, stop this
+ * cycle. Maybe we'll get new target from
+ * the host soon.
+ */
+ break;
+ }
+
+ if (alloc_can_sleep) {
+ /*
+ * CANSLEEP page allocation failed, so guest
+ * is under severe memory pressure. Quickly
+ * decrease allocation rate.
+ */
+ b->rate_alloc = max(b->rate_alloc / 2,
+ VMW_BALLOON_RATE_ALLOC_MIN);
+ break;
+ }
+
+ /*
+ * NOSLEEP page allocation failed, so the guest is
+ * under memory pressure. Let us slow down page
+ * allocations for next few cycles so that the guest
+ * gets out of memory pressure. Also, if we already
+ * allocated b->rate_alloc pages, let's pause,
+ * otherwise switch to sleeping allocations.
+ */
+ b->slow_allocation_cycles = VMW_BALLOON_SLOW_CYCLES;
+
+ if (i >= b->rate_alloc)
+ break;
+
+ alloc_can_sleep = true;
+ /* Lower rate for sleeping allocations. */
+ rate = b->rate_alloc;
+ }
+
+ if (++allocations > VMW_BALLOON_YIELD_THRESHOLD) {
+ cond_resched();
+ allocations = 0;
+ }
+
+ if (i >= rate) {
+ /* We allocated enough pages, let's take a break. */
+ break;
+ }
+ }
+
+ /*
+ * We reached our goal without failures so try increasing
+ * allocation rate.
+ */
+ if (error == 0 && i >= b->rate_alloc) {
+ unsigned int mult = i / b->rate_alloc;
+
+ b->rate_alloc =
+ min(b->rate_alloc + mult * VMW_BALLOON_RATE_ALLOC_INC,
+ VMW_BALLOON_RATE_ALLOC_MAX);
+ }
+
+ vmballoon_release_refused_pages(b);
+}
+
+/*
+ * Decrease the size of the balloon allowing guest to use more memory.
+ */
+static void vmballoon_deflate(struct vmballoon *b)
+{
+ struct page *page, *next;
+ unsigned int i = 0;
+ unsigned int goal;
+ int error;
+
+ pr_debug("%s - size: %d, target %d\n", __func__, b->size, b->target);
+
+ /* limit deallocation rate */
+ goal = min(b->size - b->target, b->rate_free);
+
+ pr_debug("%s - goal: %d, rate: %d\n", __func__, goal, b->rate_free);
+
+ /* free pages to reach target */
+ list_for_each_entry_safe(page, next, &b->pages, lru) {
+ error = vmballoon_release_page(b, page);
+ if (error) {
+ /* quickly decrease rate in case of error */
+ b->rate_free = max(b->rate_free / 2,
+ VMW_BALLOON_RATE_FREE_MIN);
+ return;
+ }
+
+ if (++i >= goal)
+ break;
+ }
+
+ /* slowly increase rate if there were no errors */
+ b->rate_free = min(b->rate_free + VMW_BALLOON_RATE_FREE_INC,
+ VMW_BALLOON_RATE_FREE_MAX);
+}
+
+/*
+ * Balloon work function: reset protocol, if needed, get the new size and
+ * adjust balloon as needed. Repeat in 1 sec.
+ */
+static void vmballoon_work(struct work_struct *work)
+{
+ struct delayed_work *dwork = to_delayed_work(work);
+ struct vmballoon *b = container_of(dwork, struct vmballoon, dwork);
+ unsigned int target;
+
+ STATS_INC(b->stats.timer);
+
+ if (b->reset_required)
+ vmballoon_reset(b);
+
+ if (b->slow_allocation_cycles > 0)
+ b->slow_allocation_cycles--;
+
+ if (vmballoon_send_get_target(b, &target)) {
+ /* update target, adjust size */
+ b->target = target;
+
+ if (b->size < target)
+ vmballoon_inflate(b);
+ else if (b->size > target)
+ vmballoon_deflate(b);
+ }
+
+ queue_delayed_work(vmballoon_wq, dwork, round_jiffies_relative(HZ));
+}
+
+/*
+ * DEBUGFS Interface
+ */
+#ifdef CONFIG_DEBUG_FS
+
+static int vmballoon_debug_show(struct seq_file *f, void *offset)
+{
+ struct vmballoon *b = f->private;
+ struct vmballoon_stats *stats = &b->stats;
+
+ /* format size info */
+ seq_printf(f,
+ "target: %8d pages\n"
+ "current: %8d pages\n",
+ b->target, b->size);
+
+ /* format rate info */
+ seq_printf(f,
+ "rateNoSleepAlloc: %8d pages/sec\n"
+ "rateSleepAlloc: %8d pages/sec\n"
+ "rateFree: %8d pages/sec\n",
+ VMW_BALLOON_NOSLEEP_ALLOC_MAX,
+ b->rate_alloc, b->rate_free);
+
+ seq_printf(f,
+ "\n"
+ "timer: %8u\n"
+ "start: %8u (%4u failed)\n"
+ "guestType: %8u (%4u failed)\n"
+ "lock: %8u (%4u failed)\n"
+ "unlock: %8u (%4u failed)\n"
+ "target: %8u (%4u failed)\n"
+ "primNoSleepAlloc: %8u (%4u failed)\n"
+ "primCanSleepAlloc: %8u (%4u failed)\n"
+ "primFree: %8u\n"
+ "errAlloc: %8u\n"
+ "errFree: %8u\n",
+ stats->timer,
+ stats->start, stats->start_fail,
+ stats->guest_type, stats->guest_type_fail,
+ stats->lock, stats->lock_fail,
+ stats->unlock, stats->unlock_fail,
+ stats->target, stats->target_fail,
+ stats->alloc, stats->alloc_fail,
+ stats->sleep_alloc, stats->sleep_alloc_fail,
+ stats->free,
+ stats->refused_alloc, stats->refused_free);
+
+ return 0;
+}
+
+static int vmballoon_debug_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, vmballoon_debug_show, inode->i_private);
+}
+
+static const struct file_operations vmballoon_debug_fops = {
+ .owner = THIS_MODULE,
+ .open = vmballoon_debug_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init vmballoon_debugfs_init(struct vmballoon *b)
+{
+ int error;
+
+ b->dbg_entry = debugfs_create_file("vmmemctl", S_IRUGO, NULL, b,
+ &vmballoon_debug_fops);
+ if (IS_ERR(b->dbg_entry)) {
+ error = PTR_ERR(b->dbg_entry);
+ pr_err("failed to create debugfs entry, error: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static void __exit vmballoon_debugfs_exit(struct vmballoon *b)
+{
+ debugfs_remove(b->dbg_entry);
+}
+
+#else
+
+static inline int vmballoon_debugfs_init(struct vmballoon *b)
+{
+ return 0;
+}
+
+static inline void vmballoon_debugfs_exit(struct vmballoon *b)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __init vmballoon_init(void)
+{
+ int error;
+
+ /*
+ * Check if we are running on VMware's hypervisor and bail out
+ * if we are not.
+ */
+ if (!vmware_platform())
+ return -ENODEV;
+
+ vmballoon_wq = create_freezeable_workqueue("vmmemctl");
+ if (!vmballoon_wq) {
+ pr_err("failed to create workqueue\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&balloon.pages);
+ INIT_LIST_HEAD(&balloon.refused_pages);
+
+ /* initialize rates */
+ balloon.rate_alloc = VMW_BALLOON_RATE_ALLOC_MAX;
+ balloon.rate_free = VMW_BALLOON_RATE_FREE_MAX;
+
+ INIT_DELAYED_WORK(&balloon.dwork, vmballoon_work);
+
+ /*
+ * Start balloon.
+ */
+ if (!vmballoon_send_start(&balloon)) {
+ pr_err("failed to send start command to the host\n");
+ error = -EIO;
+ goto fail;
+ }
+
+ if (!vmballoon_send_guest_id(&balloon)) {
+ pr_err("failed to send guest ID to the host\n");
+ error = -EIO;
+ goto fail;
+ }
+
+ error = vmballoon_debugfs_init(&balloon);
+ if (error)
+ goto fail;
+
+ queue_delayed_work(vmballoon_wq, &balloon.dwork, 0);
+
+ return 0;
+
+fail:
+ destroy_workqueue(vmballoon_wq);
+ return error;
+}
+module_init(vmballoon_init);
+
+static void __exit vmballoon_exit(void)
+{
+ cancel_delayed_work_sync(&balloon.dwork);
+ destroy_workqueue(vmballoon_wq);
+
+ vmballoon_debugfs_exit(&balloon);
+
+ /*
+ * Deallocate all reserved memory, and reset connection with monitor.
+ * Reset connection before deallocating memory to avoid potential for
+ * additional spurious resets from guest touching deallocated pages.
+ */
+ vmballoon_send_start(&balloon);
+ vmballoon_pop(&balloon);
+}
+module_exit(vmballoon_exit);
#include <linux/kernel.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/hdreg.h>
#include <linux/kdev_t.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
+#include <linux/slab.h>
#include <linux/scatterlist.h>
* published by the Free Software Foundation.
*
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/freezer.h>
#include <linux/seq_file.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
-#include <linux/gfp.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/kfifo.h>
+#include <linux/slab.h>
#include <linux/mmc/core.h>
#include <linux/mmc/card.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/debugfs.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/mmc/card.h>
#include <linux/idr.h>
#include <linux/pagemap.h>
#include <linux/leds.h>
+#include <linux/slab.h>
#include <linux/mmc/host.h>
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
mmc_card_set_blockaddr(card);
}
- switch (ext_csd[EXT_CSD_CARD_TYPE]) {
+ switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26:
card->ext_csd.hs_max_dtr = 52000000;
break;
printk(KERN_WARNING "%s: card is mmc v4 but doesn't "
"support any high-speed modes.\n",
mmc_hostname(card->host));
- goto out;
}
if (card->ext_csd.rev >= 3) {
* your option) any later version.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/scatterlist.h>
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/atmel_pdc.h>
+#include <linux/gfp.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/mmc/host.h>
#include <linux/scatterlist.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/mach-au1x00/au1000.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/host.h>
#include <linux/proc_fs.h>
+#include <linux/gfp.h>
#include <asm/cacheflush.h>
#include <asm/dma.h>
*/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include "cb710-mmc.h"
*/
#include <linux/sched.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/bio.h>
#include <linux/dma-mapping.h>
#include <linux/crc7.h>
#include <linux/debugfs.h>
#include <linux/io.h>
#include <linux/memory.h>
+#include <linux/gfp.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/i2c/tps65010.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
carddetect = -ENOSYS;
}
- if (carddetect) {
+ if (carddetect)
mmc_detect_change(host->mmc, (HZ * 200) / 1000);
- } else {
- mmc_host_enable(host->mmc);
- omap_hsmmc_reset_controller_fsm(host, SRD);
- mmc_host_lazy_disable(host->mmc);
-
+ else
mmc_detect_change(host->mmc, (HZ * 50) / 1000);
- }
}
/*
#include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
+#include <linux/gfp.h>
#include <asm/sizes.h>
#include <linux/highmem.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/highmem.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/leds.h>
#include <linux/highmem.h>
#include <linux/mmc/host.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/dma.h>
# Core functionality.
obj-$(CONFIG_MTD) += mtd.o
-mtd-y := mtdcore.o mtdsuper.o mtdbdi.o
+mtd-y := mtdcore.o mtdsuper.o
mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o
obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o
#include <linux/buffer_head.h>
#include <linux/mutex.h>
#include <linux/mount.h>
+#include <linux/slab.h>
#define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args)
#define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args)
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/math64.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/mod_devicetable.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/mtd/mtd.h>
+++ /dev/null
-/* Internal MTD definitions
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * mtdbdi.c
- */
-extern struct backing_dev_info mtd_bdi_unmappable;
-extern struct backing_dev_info mtd_bdi_ro_mappable;
-extern struct backing_dev_info mtd_bdi_rw_mappable;
*/
#include <linux/mtd/pfow.h>
#include <linux/mtd/qinfo.h>
+#include <linux/slab.h>
static int lpddr_read(struct mtd_info *mtd, loff_t adr, size_t len,
size_t *retlen, u_char *buf);
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <asm/blackfin.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/types.h>
#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
##################################################################### */
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/concat.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
struct of_flash_list {
struct mtd_info *mtd;
#include <linux/init.h>
#include <linux/module.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
// Includes
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/ioport.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/uaccess.h>
#include <asm/io.h>
##################################################################### */
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/spinlock.h>
* GNU General Public Licence
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/maple.h>
+++ /dev/null
-/* MTD backing device capabilities
- *
- * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/backing-dev.h>
-#include <linux/mtd/mtd.h>
-#include "internal.h"
-
-/*
- * backing device capabilities for non-mappable devices (such as NAND flash)
- * - permits private mappings, copies are taken of the data
- */
-struct backing_dev_info mtd_bdi_unmappable = {
- .capabilities = BDI_CAP_MAP_COPY,
-};
-
-/*
- * backing device capabilities for R/O mappable devices (such as ROM)
- * - permits private mappings, copies are taken of the data
- * - permits non-writable shared mappings
- */
-struct backing_dev_info mtd_bdi_ro_mappable = {
- .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
- BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
-};
-
-/*
- * backing device capabilities for writable mappable devices (such as RAM)
- * - permits private mappings, copies are taken of the data
- * - permits non-writable shared mappings
- */
-struct backing_dev_info mtd_bdi_rw_mappable = {
- .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
- BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
- BDI_CAP_WRITE_MAP),
-};
* Core registration and callback routines for MTD
* drivers and users.
*
+ * bdi bits are:
+ * Copyright © 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/major.h>
#include <linux/init.h>
#include <linux/mtd/compatmac.h>
#include <linux/proc_fs.h>
+#include <linux/backing-dev.h>
#include <linux/mtd/mtd.h>
-#include "internal.h"
#include "mtdcore.h"
+/*
+ * backing device capabilities for non-mappable devices (such as NAND flash)
+ * - permits private mappings, copies are taken of the data
+ */
+struct backing_dev_info mtd_bdi_unmappable = {
+ .capabilities = BDI_CAP_MAP_COPY,
+};
+
+/*
+ * backing device capabilities for R/O mappable devices (such as ROM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+struct backing_dev_info mtd_bdi_ro_mappable = {
+ .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+ BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP),
+};
+
+/*
+ * backing device capabilities for writable mappable devices (such as RAM)
+ * - permits private mappings, copies are taken of the data
+ * - permits non-writable shared mappings
+ */
+struct backing_dev_info mtd_bdi_rw_mappable = {
+ .capabilities = (BDI_CAP_MAP_COPY | BDI_CAP_MAP_DIRECT |
+ BDI_CAP_EXEC_MAP | BDI_CAP_READ_MAP |
+ BDI_CAP_WRITE_MAP),
+};
static int mtd_cls_suspend(struct device *dev, pm_message_t state);
static int mtd_cls_resume(struct device *dev);
/*====================================================================*/
/* Init code */
+static int __init mtd_bdi_init(struct backing_dev_info *bdi, const char *name)
+{
+ int ret;
+
+ ret = bdi_init(bdi);
+ if (!ret)
+ ret = bdi_register(bdi, NULL, name);
+
+ if (ret)
+ bdi_destroy(bdi);
+
+ return ret;
+}
+
static int __init init_mtd(void)
{
int ret;
+
ret = class_register(&mtd_class);
+ if (ret)
+ goto err_reg;
+
+ ret = mtd_bdi_init(&mtd_bdi_unmappable, "mtd-unmap");
+ if (ret)
+ goto err_bdi1;
+
+ ret = mtd_bdi_init(&mtd_bdi_ro_mappable, "mtd-romap");
+ if (ret)
+ goto err_bdi2;
+
+ ret = mtd_bdi_init(&mtd_bdi_rw_mappable, "mtd-rwmap");
+ if (ret)
+ goto err_bdi3;
- if (ret) {
- pr_err("Error registering mtd class: %d\n", ret);
- return ret;
- }
#ifdef CONFIG_PROC_FS
if ((proc_mtd = create_proc_entry( "mtd", 0, NULL )))
proc_mtd->read_proc = mtd_read_proc;
#endif /* CONFIG_PROC_FS */
return 0;
+
+err_bdi3:
+ bdi_destroy(&mtd_bdi_ro_mappable);
+err_bdi2:
+ bdi_destroy(&mtd_bdi_unmappable);
+err_bdi1:
+ class_unregister(&mtd_class);
+err_reg:
+ pr_err("Error registering mtd class or bdi: %d\n", ret);
+ return ret;
}
static void __exit cleanup_mtd(void)
remove_proc_entry( "mtd", NULL);
#endif /* CONFIG_PROC_FS */
class_unregister(&mtd_class);
+ bdi_destroy(&mtd_bdi_unmappable);
+ bdi_destroy(&mtd_bdi_ro_mappable);
+ bdi_destroy(&mtd_bdi_rw_mappable);
}
module_init(init_mtd);
#include <linux/mtd/super.h>
#include <linux/namei.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
/*
* compare superblocks to see if they're equivalent
sb->s_mtd = mtd;
sb->s_dev = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
+ sb->s_bdi = mtd->backing_dev_info;
return 0;
}
#include <linux/types.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/io.h>
#define CAFE_NAND_CTRL1 0x00
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <asm/io.h>
#include <linux/io.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
#include <mach/nand.h>
#include <linux/delay.h>
#include <linux/rslib.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/fsl_lbc.h>
#define FSL_UPM_WAIT_RUN_PATTERN 0x1
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/ndfc.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/nand.h>
#include <mach/fsmc.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
}
buf64 = (uint64_t *)buf;
while (i < len/8) {
- uint64_t x;
+ /*
+ * Since GCC has no proper constraint (PR 43518)
+ * force x variable to r2/r3 registers as ldrd instruction
+ * requires first register to be even.
+ */
+ register uint64_t x asm ("r2");
+
asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
buf64[i++] = x;
}
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <mach/dma.h>
#include <plat/pxa3xx_nand.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
/*--------------------------------------------------------------------------*/
#include <linux/init.h>
#include <linux/of.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/mtd/partitions.h>
int __devinit of_mtd_parse_partitions(struct device *dev,
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/mach/flash.h>
#include <plat/gpmc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/delay.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/list.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#define PRINT_PREF KERN_INFO "mtd_oobtest: "
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#define PRINT_PREF KERN_INFO "mtd_pagetest: "
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#define PRINT_PREF KERN_INFO "mtd_readtest: "
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#define PRINT_PREF KERN_INFO "mtd_speedtest: "
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#define PRINT_PREF KERN_INFO "mtd_subpagetest: "
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#define PRINT_PREF KERN_INFO "mtd_torturetest: "
#include <linux/kthread.h>
#include <linux/reboot.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "ubi.h"
/* Maximum length of the 'mtd=' parameter */
#include <linux/module.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <linux/ioctl.h>
#include <linux/capability.h>
#include <linux/uaccess.h>
#include <linux/err.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/math64.h>
#include <linux/module.h>
#include <linux/crc32.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "ubi.h"
#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/fs.h>
#include <asm/div64.h>
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/crc32.h>
#include <linux/math64.h>
#include "ubi.h"
#include <linux/fs.h>
#include <linux/cdev.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <linux/notifier.h>
#include <linux/err.h>
#include <linux/math64.h>
+#include <linux/slab.h>
#include "ubi.h"
#ifdef CONFIG_MTD_UBI_DEBUG_PARANOID
#include <linux/crc32.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/div64.h>
#include "ubi.h"
#include <linux/fcntl.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/etherdevice.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/errno.h>
#include <linux/in.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/mca-legacy.h>
#include <linux/errno.h>
#include <linux/in.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/mii.h>
#include <linux/eisa.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>
+#include <linux/gfp.h>
#include <asm/irq.h> /* For nr_irqs only. */
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/route.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/skbuff.h>
#include <asm/irq.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
+#include <linux/gfp.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/crc32.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/gfp.h>
#include <asm/irq.h>
#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
__func__, rx_status, rx_size, cur_rx);
#if RTL8139_DEBUG > 2
- print_dump_hex(KERN_DEBUG, "Frame contents: ",
+ print_hex_dump(KERN_DEBUG, "Frame contents: ",
DUMP_PREFIX_OFFSET, 16, 1,
&rx_ring[ring_offset], 70, true);
#endif
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
To compile this driver as a module, choose M here: the module
will be called cxgb3.
+config CHELSIO_T4_DEPENDS
+ tristate
+ depends on PCI && INET
+ default y
+
+config CHELSIO_T4
+ tristate "Chelsio Communications T4 Ethernet support"
+ depends on CHELSIO_T4_DEPENDS
+ select FW_LOADER
+ select MDIO
+ help
+ This driver supports Chelsio T4-based gigabit and 10Gb Ethernet
+ adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module choose M here; the module
+ will be called cxgb4.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS && INET && SPARSEMEM
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CHELSIO_T1) += chelsio/
obj-$(CONFIG_CHELSIO_T3) += cxgb3/
+obj-$(CONFIG_CHELSIO_T4) += cxgb4/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_USB_HSO) += usb/
obj-$(CONFIG_USB_USBNET) += usb/
obj-$(CONFIG_USB_ZD1201) += usb/
+obj-$(CONFIG_USB_IPHETH) += usb/
obj-y += wireless/
obj-$(CONFIG_NET_TULIP) += tulip/
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/highmem.h>
#include <linux/sockios.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#include <linux/if_vlan.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/compiler.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ip.h>
#include <linux/atalk.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <net/route.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/atalk.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/dma.h>
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/if_arp.h>
#include <net/arp.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/bootmem.h>
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/if_arp.h>
#include <net/arp.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/arcdevice.h>
* **********************
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/if_arp.h>
#include <net/arp.h>
*
* **********************
*/
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/if_arp.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
#include <linux/ethtool.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
processed++;
}
- if (processed) {
- wrw(ep, REG_RXDENQ, processed);
- wrw(ep, REG_RXSTSENQ, processed);
- }
-
return processed;
}
goto poll_some_more;
}
+ if (rx) {
+ wrw(ep, REG_RXDENQ, rx);
+ wrw(ep, REG_RXSTSENQ, rx);
+ }
+
return rx;
}
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/kernel.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <mach/npe.h>
#include <mach/qmgr.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/irq.h>
}
/**
- * ks8695_rx - Receive packets called by NAPI poll method
+ * ks8695_rx - Receive packets called by NAPI poll method
* @ksp: Private data for the KS8695 Ethernet
- * @budget: The max packets would be receive
+ * @budget: Number of packets allowed to process
*/
-
static int ks8695_rx(struct ks8695_priv *ksp, int budget)
{
struct net_device *ndev = ksp->ndev;
int buff_n;
u32 flags;
int pktlen;
- int last_rx_processed = -1;
int received = 0;
buff_n = ksp->next_rx_desc_read;
cpu_to_le32(RDES_OWN)))) {
rmb();
flags = le32_to_cpu(ksp->rx_ring[buff_n].status);
+
/* Found an SKB which we own, this means we
* received a packet
*/
ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
rx_finished:
received++;
- /* And note this as processed so we can start
- * from here next time
- */
- last_rx_processed = buff_n;
buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
- /*And note which RX descriptor we last did */
- if (likely(last_rx_processed != -1))
- ksp->next_rx_desc_read =
- (last_rx_processed + 1) &
- MAX_RX_DESC_MASK;
}
+
+ /* And note which RX descriptor we last did */
+ ksp->next_rx_desc_read = buff_n;
+
/* And refill the buffers */
ks8695_refill_rxbuffers(ksp);
- /* Kick the RX DMA engine, in case it became
- * suspended */
+ /* Kick the RX DMA engine, in case it became suspended */
ks8695_writereg(ksp, KS8695_DRSC, 0);
+
return received;
}
#include <linux/ethtool.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/gfp.h>
#define DRV_MODULE_NAME "w90p910-emc"
#define DRV_MODULE_VERSION "0.1"
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
+#include <linux/slab.h>
#include "atl1c.h"
#include <linux/netdevice.h>
#include <linux/ethtool.h>
+#include <linux/slab.h>
#include "atl1e.h"
#define ATLX_DRIVER_VERSION "2.1.3"
MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
- Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(ATLX_DRIVER_VERSION);
#include <linux/pci_ids.h>
#include <linux/pm.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/tcp.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/slab.h>
#include <net/ax88796.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/ssb/ssb.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/clk.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/crc32.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include "be_hw.h"
req->params.op_type = cpu_to_le32(IMG_TYPE_REDBOOT);
req->params.op_code = cpu_to_le32(FLASHROM_OPER_REPORT);
- req->params.offset = offset;
- req->params.data_buf_size = 0x4;
+ req->params.offset = cpu_to_le32(offset);
+ req->params.data_buf_size = cpu_to_le32(0x4);
status = be_mcc_notify_wait(adapter);
if (!status)
{
int ret, i;
struct be_dma_mem ddrdma_cmd;
- u64 pattern[2] = {0x5a5a5a5a5a5a5a5a, 0xa5a5a5a5a5a5a5a5};
+ u64 pattern[2] = {0x5a5a5a5a5a5a5a5aULL, 0xa5a5a5a5a5a5a5a5ULL};
ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
ddrdma_cmd.va = pci_alloc_consistent(adapter->pdev, ddrdma_cmd.size,
return;
}
vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
- vid = be16_to_cpu(vid);
+ vid = swab16(vid);
vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
} else {
netif_receive_skb(skb);
napi_gro_frags(&eq_obj->napi);
} else {
vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
- vid = be16_to_cpu(vid);
+ vid = swab16(vid);
if (!adapter->vlan_grp || adapter->vlans_added == 0)
return;
p += crc_offset;
status = be_cmd_get_flash_crc(adapter, flashed_crc,
- (img_start + image_size - 4));
+ (image_size - 4));
if (status) {
dev_err(&adapter->pdev->dev,
"could not get crc from flash, not flashing redboot\n");
struct flash_file_hdr_g3 *fhdr3;
struct image_hdr *img_hdr_ptr = NULL;
struct be_dma_mem flash_cmd;
- int status, i = 0;
+ int status, i = 0, num_imgs = 0;
const u8 *p;
strcpy(fw_file, func);
if ((adapter->generation == BE_GEN3) &&
(get_ufigen_type(fhdr) == BE_GEN3)) {
fhdr3 = (struct flash_file_hdr_g3 *) fw->data;
- for (i = 0; i < fhdr3->num_imgs; i++) {
+ num_imgs = le32_to_cpu(fhdr3->num_imgs);
+ for (i = 0; i < num_imgs; i++) {
img_hdr_ptr = (struct image_hdr *) (fw->data +
(sizeof(struct flash_file_hdr_g3) +
- i * sizeof(struct image_hdr)));
- if (img_hdr_ptr->imageid == 1) {
- status = be_flash_data(adapter, fw,
- &flash_cmd, fhdr3->num_imgs);
- }
-
+ i * sizeof(struct image_hdr)));
+ if (le32_to_cpu(img_hdr_ptr->imageid) == 1)
+ status = be_flash_data(adapter, fw, &flash_cmd,
+ num_imgs);
}
} else if ((adapter->generation == BE_GEN2) &&
(get_ufigen_type(fhdr) == BE_GEN2)) {
#include <linux/crc32.h>
#include <linux/bitrev.h>
#include <linux/ethtool.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include "bnx2_fw.h"
#define DRV_MODULE_NAME "bnx2"
-#define DRV_MODULE_VERSION "2.0.8"
-#define DRV_MODULE_RELDATE "Feb 15, 2010"
+#define DRV_MODULE_VERSION "2.0.9"
+#define DRV_MODULE_RELDATE "April 27, 2010"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-5.0.0.j6.fw"
#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-5.0.0.j3.fw"
#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-5.0.0.j9.fw"
MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
+static void bnx2_init_napi(struct bnx2 *bp);
+
static inline u32 bnx2_tx_avail(struct bnx2 *bp, struct bnx2_tx_ring_info *txr)
{
u32 diff;
}
static void
-bnx2_netif_stop(struct bnx2 *bp)
+bnx2_netif_stop(struct bnx2 *bp, bool stop_cnic)
{
- bnx2_cnic_stop(bp);
+ if (stop_cnic)
+ bnx2_cnic_stop(bp);
if (netif_running(bp->dev)) {
int i;
}
static void
-bnx2_netif_start(struct bnx2 *bp)
+bnx2_netif_start(struct bnx2 *bp, bool start_cnic)
{
if (atomic_dec_and_test(&bp->intr_sem)) {
if (netif_running(bp->dev)) {
netif_tx_wake_all_queues(bp->dev);
bnx2_napi_enable(bp);
bnx2_enable_int(bp);
- bnx2_cnic_start(bp);
+ if (start_cnic)
+ bnx2_cnic_start(bp);
}
}
}
rc = bnx2_alloc_bad_rbuf(bp);
}
- if (bp->flags & BNX2_FLAG_USING_MSIX)
+ if (bp->flags & BNX2_FLAG_USING_MSIX) {
bnx2_setup_msix_tbl(bp);
+ /* Prevent MSIX table reads and write from timing out */
+ REG_WR(bp, BNX2_MISC_ECO_HW_CTL,
+ BNX2_MISC_ECO_HW_CTL_LARGE_GRC_TMOUT_EN);
+ }
return rc;
}
bnx2_disable_int(bp);
bnx2_setup_int_mode(bp, disable_msi);
+ bnx2_init_napi(bp);
bnx2_napi_enable(bp);
rc = bnx2_alloc_mem(bp);
if (rc)
return;
}
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, true);
bnx2_init_nic(bp, 1);
atomic_set(&bp->intr_sem, 1);
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, true);
rtnl_unlock();
}
struct bnx2 *bp = netdev_priv(dev);
if (netif_running(dev))
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, false);
bp->vlgrp = vlgrp;
if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_KEEP_VLAN_UPDATE, 0, 1);
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, false);
}
#endif
bp->stats_ticks &= BNX2_HC_STATS_TICKS_HC_STAT_TICKS;
if (netif_running(bp->dev)) {
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, true);
bnx2_init_nic(bp, 0);
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, true);
}
return 0;
/* Reset will erase chipset stats; save them */
bnx2_save_stats(bp);
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, true);
bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
bnx2_free_skbs(bp);
bnx2_free_mem(bp);
bnx2_setup_cnic_irq_info(bp);
mutex_unlock(&bp->cnic_lock);
#endif
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, true);
}
return 0;
}
if (etest->flags & ETH_TEST_FL_OFFLINE) {
int i;
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, true);
bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG);
bnx2_free_skbs(bp);
bnx2_shutdown_chip(bp);
else {
bnx2_init_nic(bp, 1);
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, true);
}
/* wait for link up */
int i;
for (i = 0; i < bp->irq_nvecs; i++) {
- disable_irq(bp->irq_tbl[i].vector);
- bnx2_interrupt(bp->irq_tbl[i].vector, &bp->bnx2_napi[i]);
- enable_irq(bp->irq_tbl[i].vector);
+ struct bnx2_irq *irq = &bp->irq_tbl[i];
+
+ disable_irq(irq->vector);
+ irq->handler(irq->vector, &bp->bnx2_napi[i]);
+ enable_irq(irq->vector);
}
}
#endif
{
int i;
- for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
+ for (i = 0; i < bp->irq_nvecs; i++) {
struct bnx2_napi *bnapi = &bp->bnx2_napi[i];
int (*poll)(struct napi_struct *, int);
dev->ethtool_ops = &bnx2_ethtool_ops;
bp = netdev_priv(dev);
- bnx2_init_napi(bp);
pci_set_drvdata(pdev, dev);
return 0;
flush_scheduled_work();
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, true);
netif_device_detach(dev);
del_timer_sync(&bp->timer);
bnx2_shutdown_chip(bp);
bnx2_set_power_state(bp, PCI_D0);
netif_device_attach(dev);
bnx2_init_nic(bp, 1);
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, true);
return 0;
}
}
if (netif_running(dev)) {
- bnx2_netif_stop(bp);
+ bnx2_netif_stop(bp, true);
del_timer_sync(&bp->timer);
bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET);
}
rtnl_lock();
if (netif_running(dev))
- bnx2_netif_start(bp);
+ bnx2_netif_start(bp, true);
netif_device_attach(dev);
rtnl_unlock();
write_lock_bh(&bond->curr_slave_lock);
}
}
+
+ /* resend IGMP joins since all were sent on curr_active_slave */
+ if (bond->params.mode == BOND_MODE_ROUNDROBIN) {
+ bond_resend_igmp_join_requests(bond);
+ }
}
/**
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave, *start_at;
int i, slave_no, res = 1;
+ struct iphdr *iph = ip_hdr(skb);
read_lock(&bond->lock);
if (!BOND_IS_OK(bond))
goto out;
-
/*
- * Concurrent TX may collide on rr_tx_counter; we accept that
- * as being rare enough not to justify using an atomic op here
+ * Start with the curr_active_slave that joined the bond as the
+ * default for sending IGMP traffic. For failover purposes one
+ * needs to maintain some consistency for the interface that will
+ * send the join/membership reports. The curr_active_slave found
+ * will send all of this type of traffic.
*/
- slave_no = bond->rr_tx_counter++ % bond->slave_cnt;
+ if ((iph->protocol == IPPROTO_IGMP) &&
+ (skb->protocol == htons(ETH_P_IP))) {
- bond_for_each_slave(bond, slave, i) {
- slave_no--;
- if (slave_no < 0)
- break;
+ read_lock(&bond->curr_slave_lock);
+ slave = bond->curr_active_slave;
+ read_unlock(&bond->curr_slave_lock);
+
+ if (!slave)
+ goto out;
+ } else {
+ /*
+ * Concurrent TX may collide on rr_tx_counter; we accept
+ * that as being rare enough not to justify using an
+ * atomic op here.
+ */
+ slave_no = bond->rr_tx_counter++ % bond->slave_cnt;
+
+ bond_for_each_slave(bond, slave, i) {
+ slave_no--;
+ if (slave_no < 0)
+ break;
+ }
}
start_at = slave;
.ndo_vlan_rx_kill_vid = bond_vlan_rx_kill_vid,
};
+static void bond_destructor(struct net_device *bond_dev)
+{
+ struct bonding *bond = netdev_priv(bond_dev);
+ if (bond->wq)
+ destroy_workqueue(bond->wq);
+ free_netdev(bond_dev);
+}
+
static void bond_setup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
bond_dev->ethtool_ops = &bond_ethtool_ops;
bond_set_mode_ops(bond, bond->params.mode);
- bond_dev->destructor = free_netdev;
+ bond_dev->destructor = bond_destructor;
/* Initialize the device options */
bond_dev->tx_queue_len = 0;
bond_remove_proc_entry(bond);
- if (bond->wq)
- destroy_workqueue(bond->wq);
-
netif_addr_lock_bh(bond_dev);
bond_mc_list_destroy(bond);
netif_addr_unlock_bh(bond_dev);
bond_setup);
if (!bond_dev) {
pr_err("%s: eek! can't alloc netdev!\n", name);
- res = -ENOMEM;
- goto out;
+ rtnl_unlock();
+ return -ENOMEM;
}
dev_net_set(bond_dev, net);
if (!name) {
res = dev_alloc_name(bond_dev, "bond%d");
if (res < 0)
- goto out_netdev;
+ goto out;
}
res = register_netdevice(bond_dev);
- if (res < 0)
- goto out_netdev;
out:
rtnl_unlock();
+ if (res < 0)
+ bond_destructor(bond_dev);
return res;
-out_netdev:
- free_netdev(bond_dev);
- goto out;
}
static int __net_init bond_net_init(struct net *net)
#include <linux/can/dev.h>
#include <linux/can/error.h>
+#include <asm/bfin_can.h>
#include <asm/portmux.h>
#define DRV_NAME "bfin_can"
#define BFIN_CAN_TIMEOUT 100
#define TX_ECHO_SKB_MAX 1
-/*
- * transmit and receive channels
- */
-#define TRANSMIT_CHL 24
-#define RECEIVE_STD_CHL 0
-#define RECEIVE_EXT_CHL 4
-#define RECEIVE_RTR_CHL 8
-#define RECEIVE_EXT_RTR_CHL 12
-#define MAX_CHL_NUMBER 32
-
-/*
- * bfin can registers layout
- */
-struct bfin_can_mask_regs {
- u16 aml;
- u16 dummy1;
- u16 amh;
- u16 dummy2;
-};
-
-struct bfin_can_channel_regs {
- u16 data[8];
- u16 dlc;
- u16 dummy1;
- u16 tsv;
- u16 dummy2;
- u16 id0;
- u16 dummy3;
- u16 id1;
- u16 dummy4;
-};
-
-struct bfin_can_regs {
- /*
- * global control and status registers
- */
- u16 mc1; /* offset 0 */
- u16 dummy1;
- u16 md1; /* offset 4 */
- u16 rsv1[13];
- u16 mbtif1; /* offset 0x20 */
- u16 dummy2;
- u16 mbrif1; /* offset 0x24 */
- u16 dummy3;
- u16 mbim1; /* offset 0x28 */
- u16 rsv2[11];
- u16 mc2; /* offset 0x40 */
- u16 dummy4;
- u16 md2; /* offset 0x44 */
- u16 dummy5;
- u16 trs2; /* offset 0x48 */
- u16 rsv3[11];
- u16 mbtif2; /* offset 0x60 */
- u16 dummy6;
- u16 mbrif2; /* offset 0x64 */
- u16 dummy7;
- u16 mbim2; /* offset 0x68 */
- u16 rsv4[11];
- u16 clk; /* offset 0x80 */
- u16 dummy8;
- u16 timing; /* offset 0x84 */
- u16 rsv5[3];
- u16 status; /* offset 0x8c */
- u16 dummy9;
- u16 cec; /* offset 0x90 */
- u16 dummy10;
- u16 gis; /* offset 0x94 */
- u16 dummy11;
- u16 gim; /* offset 0x98 */
- u16 rsv6[3];
- u16 ctrl; /* offset 0xa0 */
- u16 dummy12;
- u16 intr; /* offset 0xa4 */
- u16 rsv7[7];
- u16 esr; /* offset 0xb4 */
- u16 rsv8[37];
-
- /*
- * channel(mailbox) mask and message registers
- */
- struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */
- struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
-};
-
/*
* bfin can private data
*/
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
timing |= SAM;
- bfin_write16(®->clk, clk);
+ bfin_write16(®->clock, clk);
bfin_write16(®->timing, timing);
dev_info(dev->dev.parent, "setting CLOCK=0x%04x TIMING=0x%04x\n",
bfin_write16(®->gim, 0);
/* reset can and enter configuration mode */
- bfin_write16(®->ctrl, SRS | CCR);
+ bfin_write16(®->control, SRS | CCR);
SSYNC();
- bfin_write16(®->ctrl, CCR);
+ bfin_write16(®->control, CCR);
SSYNC();
- while (!(bfin_read16(®->ctrl) & CCA)) {
+ while (!(bfin_read16(®->control) & CCA)) {
udelay(10);
if (--timeout == 0) {
dev_err(dev->dev.parent,
/*
* leave configuration mode
*/
- bfin_write16(®->ctrl, bfin_read16(®->ctrl) & ~CCR);
+ bfin_write16(®->control, bfin_read16(®->control) & ~CCR);
while (bfin_read16(®->status) & CCA) {
udelay(10);
if (netif_running(dev)) {
/* enter sleep mode */
- bfin_write16(®->ctrl, bfin_read16(®->ctrl) | SMR);
+ bfin_write16(®->control, bfin_read16(®->control) | SMR);
SSYNC();
while (!(bfin_read16(®->intr) & SMACK)) {
udelay(10);
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/can.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/can.h>
#include <linux/can/dev.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/can.h>
#include <linux/can/dev.h>
netdev = alloc_candev(sizeof(struct ems_usb), MAX_TX_URBS);
if (!netdev) {
- dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
+ dev_err(&intf->dev, "ems_usb: Couldn't alloc candev\n");
return -ENOMEM;
}
dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->intr_urb) {
- dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n");
+ dev_err(&intf->dev, "Couldn't alloc intr URB\n");
goto cleanup_candev;
}
dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL);
if (!dev->intr_in_buffer) {
- dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n");
+ dev_err(&intf->dev, "Couldn't alloc Intr buffer\n");
goto cleanup_intr_urb;
}
dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE +
sizeof(struct ems_cpc_msg), GFP_KERNEL);
if (!dev->tx_msg_buffer) {
- dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n");
+ dev_err(&intf->dev, "Couldn't alloc Tx buffer\n");
goto cleanup_intr_in_buffer;
}
#include <linux/if_ether.h>
#include <linux/can.h>
#include <linux/can/dev.h>
+#include <linux/slab.h>
#include <net/rtnetlink.h>
static __initdata const char banner[] =
#include <linux/mdio.h>
#include <linux/crc32.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/pci_ids.h>
#include "suni1x10gexp_regs.h"
#include <linux/crc32.h>
+#include <linux/slab.h>
#define OFFSET(REG_ADDR) ((REG_ADDR) << 2)
#include <linux/ip.h>
#include <linux/in.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include "cpl5_cmd.h"
#include "sge.h"
struct cnic_local *cp = dev->cnic_priv;
u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
- prefetch(cp->status_blk.bnx2x);
- prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+ if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags))) {
+ prefetch(cp->status_blk.bnx2x);
+ prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
- if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
tasklet_schedule(&cp->cnic_irq_task);
-
- cnic_chk_pkt_rings(cp);
+ cnic_chk_pkt_rings(cp);
+ }
return 0;
}
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/io.h>
int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *mdio_ops)
{
- cphy_init(phy, adapter, MDIO_PRTAD_NONE, &xaui_direct_ops, mdio_ops,
+ cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
"10GBASE-CX4");
return 0;
#include <linux/log2.h>
#include <linux/stringify.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "common.h"
static int await_mgmt_replies(struct adapter *adap, unsigned long init_cnt,
unsigned long n)
{
- int attempts = 5;
+ int attempts = 10;
while (adap->sge.qs[0].rspq.offload_pkts < init_cnt + n) {
if (!--attempts)
*/
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/neighbour.h>
#include <linux/notifier.h>
#include <asm/atomic.h>
#include <linux/if.h>
#include <linux/if_vlan.h>
#include <linux/jhash.h>
+#include <linux/slab.h>
#include <net/neighbour.h>
#include "common.h"
#include "t3cdev.h"
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include "common.h"
#include "regs.h"
--- /dev/null
+#
+# Chelsio T4 driver
+#
+
+obj-$(CONFIG_CHELSIO_T4) += cxgb4.o
+
+cxgb4-objs := cxgb4_main.o l2t.o t4_hw.o sge.o
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CXGB4_H__
+#define __CXGB4_H__
+
+#include <linux/bitops.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include "cxgb4_uld.h"
+#include "t4_hw.h"
+
+#define FW_VERSION_MAJOR 1
+#define FW_VERSION_MINOR 1
+#define FW_VERSION_MICRO 0
+
+enum {
+ MAX_NPORTS = 4, /* max # of ports */
+ SERNUM_LEN = 16, /* Serial # length */
+ EC_LEN = 16, /* E/C length */
+ ID_LEN = 16, /* ID length */
+};
+
+enum {
+ MEM_EDC0,
+ MEM_EDC1,
+ MEM_MC
+};
+
+enum dev_master {
+ MASTER_CANT,
+ MASTER_MAY,
+ MASTER_MUST
+};
+
+enum dev_state {
+ DEV_STATE_UNINIT,
+ DEV_STATE_INIT,
+ DEV_STATE_ERR
+};
+
+enum {
+ PAUSE_RX = 1 << 0,
+ PAUSE_TX = 1 << 1,
+ PAUSE_AUTONEG = 1 << 2
+};
+
+struct port_stats {
+ u64 tx_octets; /* total # of octets in good frames */
+ u64 tx_frames; /* all good frames */
+ u64 tx_bcast_frames; /* all broadcast frames */
+ u64 tx_mcast_frames; /* all multicast frames */
+ u64 tx_ucast_frames; /* all unicast frames */
+ u64 tx_error_frames; /* all error frames */
+
+ u64 tx_frames_64; /* # of Tx frames in a particular range */
+ u64 tx_frames_65_127;
+ u64 tx_frames_128_255;
+ u64 tx_frames_256_511;
+ u64 tx_frames_512_1023;
+ u64 tx_frames_1024_1518;
+ u64 tx_frames_1519_max;
+
+ u64 tx_drop; /* # of dropped Tx frames */
+ u64 tx_pause; /* # of transmitted pause frames */
+ u64 tx_ppp0; /* # of transmitted PPP prio 0 frames */
+ u64 tx_ppp1; /* # of transmitted PPP prio 1 frames */
+ u64 tx_ppp2; /* # of transmitted PPP prio 2 frames */
+ u64 tx_ppp3; /* # of transmitted PPP prio 3 frames */
+ u64 tx_ppp4; /* # of transmitted PPP prio 4 frames */
+ u64 tx_ppp5; /* # of transmitted PPP prio 5 frames */
+ u64 tx_ppp6; /* # of transmitted PPP prio 6 frames */
+ u64 tx_ppp7; /* # of transmitted PPP prio 7 frames */
+
+ u64 rx_octets; /* total # of octets in good frames */
+ u64 rx_frames; /* all good frames */
+ u64 rx_bcast_frames; /* all broadcast frames */
+ u64 rx_mcast_frames; /* all multicast frames */
+ u64 rx_ucast_frames; /* all unicast frames */
+ u64 rx_too_long; /* # of frames exceeding MTU */
+ u64 rx_jabber; /* # of jabber frames */
+ u64 rx_fcs_err; /* # of received frames with bad FCS */
+ u64 rx_len_err; /* # of received frames with length error */
+ u64 rx_symbol_err; /* symbol errors */
+ u64 rx_runt; /* # of short frames */
+
+ u64 rx_frames_64; /* # of Rx frames in a particular range */
+ u64 rx_frames_65_127;
+ u64 rx_frames_128_255;
+ u64 rx_frames_256_511;
+ u64 rx_frames_512_1023;
+ u64 rx_frames_1024_1518;
+ u64 rx_frames_1519_max;
+
+ u64 rx_pause; /* # of received pause frames */
+ u64 rx_ppp0; /* # of received PPP prio 0 frames */
+ u64 rx_ppp1; /* # of received PPP prio 1 frames */
+ u64 rx_ppp2; /* # of received PPP prio 2 frames */
+ u64 rx_ppp3; /* # of received PPP prio 3 frames */
+ u64 rx_ppp4; /* # of received PPP prio 4 frames */
+ u64 rx_ppp5; /* # of received PPP prio 5 frames */
+ u64 rx_ppp6; /* # of received PPP prio 6 frames */
+ u64 rx_ppp7; /* # of received PPP prio 7 frames */
+
+ u64 rx_ovflow0; /* drops due to buffer-group 0 overflows */
+ u64 rx_ovflow1; /* drops due to buffer-group 1 overflows */
+ u64 rx_ovflow2; /* drops due to buffer-group 2 overflows */
+ u64 rx_ovflow3; /* drops due to buffer-group 3 overflows */
+ u64 rx_trunc0; /* buffer-group 0 truncated packets */
+ u64 rx_trunc1; /* buffer-group 1 truncated packets */
+ u64 rx_trunc2; /* buffer-group 2 truncated packets */
+ u64 rx_trunc3; /* buffer-group 3 truncated packets */
+};
+
+struct lb_port_stats {
+ u64 octets;
+ u64 frames;
+ u64 bcast_frames;
+ u64 mcast_frames;
+ u64 ucast_frames;
+ u64 error_frames;
+
+ u64 frames_64;
+ u64 frames_65_127;
+ u64 frames_128_255;
+ u64 frames_256_511;
+ u64 frames_512_1023;
+ u64 frames_1024_1518;
+ u64 frames_1519_max;
+
+ u64 drop;
+
+ u64 ovflow0;
+ u64 ovflow1;
+ u64 ovflow2;
+ u64 ovflow3;
+ u64 trunc0;
+ u64 trunc1;
+ u64 trunc2;
+ u64 trunc3;
+};
+
+struct tp_tcp_stats {
+ u32 tcpOutRsts;
+ u64 tcpInSegs;
+ u64 tcpOutSegs;
+ u64 tcpRetransSegs;
+};
+
+struct tp_err_stats {
+ u32 macInErrs[4];
+ u32 hdrInErrs[4];
+ u32 tcpInErrs[4];
+ u32 tnlCongDrops[4];
+ u32 ofldChanDrops[4];
+ u32 tnlTxDrops[4];
+ u32 ofldVlanDrops[4];
+ u32 tcp6InErrs[4];
+ u32 ofldNoNeigh;
+ u32 ofldCongDefer;
+};
+
+struct tp_params {
+ unsigned int ntxchan; /* # of Tx channels */
+ unsigned int tre; /* log2 of core clocks per TP tick */
+};
+
+struct vpd_params {
+ unsigned int cclk;
+ u8 ec[EC_LEN + 1];
+ u8 sn[SERNUM_LEN + 1];
+ u8 id[ID_LEN + 1];
+};
+
+struct pci_params {
+ unsigned char speed;
+ unsigned char width;
+};
+
+struct adapter_params {
+ struct tp_params tp;
+ struct vpd_params vpd;
+ struct pci_params pci;
+
+ unsigned int fw_vers;
+ unsigned int tp_vers;
+ u8 api_vers[7];
+
+ unsigned short mtus[NMTUS];
+ unsigned short a_wnd[NCCTRL_WIN];
+ unsigned short b_wnd[NCCTRL_WIN];
+
+ unsigned char nports; /* # of ethernet ports */
+ unsigned char portvec;
+ unsigned char rev; /* chip revision */
+ unsigned char offload;
+
+ unsigned int ofldq_wr_cred;
+};
+
+struct trace_params {
+ u32 data[TRACE_LEN / 4];
+ u32 mask[TRACE_LEN / 4];
+ unsigned short snap_len;
+ unsigned short min_len;
+ unsigned char skip_ofst;
+ unsigned char skip_len;
+ unsigned char invert;
+ unsigned char port;
+};
+
+struct link_config {
+ unsigned short supported; /* link capabilities */
+ unsigned short advertising; /* advertised capabilities */
+ unsigned short requested_speed; /* speed user has requested */
+ unsigned short speed; /* actual link speed */
+ unsigned char requested_fc; /* flow control user has requested */
+ unsigned char fc; /* actual link flow control */
+ unsigned char autoneg; /* autonegotiating? */
+ unsigned char link_ok; /* link up? */
+};
+
+#define FW_LEN16(fw_struct) FW_CMD_LEN16(sizeof(fw_struct) / 16)
+
+enum {
+ MAX_ETH_QSETS = 32, /* # of Ethernet Tx/Rx queue sets */
+ MAX_OFLD_QSETS = 16, /* # of offload Tx/Rx queue sets */
+ MAX_CTRL_QUEUES = NCHAN, /* # of control Tx queues */
+ MAX_RDMA_QUEUES = NCHAN, /* # of streaming RDMA Rx queues */
+};
+
+enum {
+ MAX_EGRQ = 128, /* max # of egress queues, including FLs */
+ MAX_INGQ = 64 /* max # of interrupt-capable ingress queues */
+};
+
+struct adapter;
+struct vlan_group;
+struct sge_rspq;
+
+struct port_info {
+ struct adapter *adapter;
+ struct vlan_group *vlan_grp;
+ u16 viid;
+ s16 xact_addr_filt; /* index of exact MAC address filter */
+ u16 rss_size; /* size of VI's RSS table slice */
+ s8 mdio_addr;
+ u8 port_type;
+ u8 mod_type;
+ u8 port_id;
+ u8 tx_chan;
+ u8 lport; /* associated offload logical port */
+ u8 rx_offload; /* CSO, etc */
+ u8 nqsets; /* # of qsets */
+ u8 first_qset; /* index of first qset */
+ struct link_config link_cfg;
+};
+
+/* port_info.rx_offload flags */
+enum {
+ RX_CSO = 1 << 0,
+};
+
+struct dentry;
+struct work_struct;
+
+enum { /* adapter flags */
+ FULL_INIT_DONE = (1 << 0),
+ USING_MSI = (1 << 1),
+ USING_MSIX = (1 << 2),
+ QUEUES_BOUND = (1 << 3),
+ FW_OK = (1 << 4),
+};
+
+struct rx_sw_desc;
+
+struct sge_fl { /* SGE free-buffer queue state */
+ unsigned int avail; /* # of available Rx buffers */
+ unsigned int pend_cred; /* new buffers since last FL DB ring */
+ unsigned int cidx; /* consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned long alloc_failed; /* # of times buffer allocation failed */
+ unsigned long large_alloc_failed;
+ unsigned long starving;
+ /* RO fields */
+ unsigned int cntxt_id; /* SGE context id for the free list */
+ unsigned int size; /* capacity of free list */
+ struct rx_sw_desc *sdesc; /* address of SW Rx descriptor ring */
+ __be64 *desc; /* address of HW Rx descriptor ring */
+ dma_addr_t addr; /* bus address of HW ring start */
+};
+
+/* A packet gather list */
+struct pkt_gl {
+ skb_frag_t frags[MAX_SKB_FRAGS];
+ void *va; /* virtual address of first byte */
+ unsigned int nfrags; /* # of fragments */
+ unsigned int tot_len; /* total length of fragments */
+};
+
+typedef int (*rspq_handler_t)(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl);
+
+struct sge_rspq { /* state for an SGE response queue */
+ struct napi_struct napi;
+ const __be64 *cur_desc; /* current descriptor in queue */
+ unsigned int cidx; /* consumer index */
+ u8 gen; /* current generation bit */
+ u8 intr_params; /* interrupt holdoff parameters */
+ u8 next_intr_params; /* holdoff params for next interrupt */
+ u8 pktcnt_idx; /* interrupt packet threshold */
+ u8 uld; /* ULD handling this queue */
+ u8 idx; /* queue index within its group */
+ int offset; /* offset into current Rx buffer */
+ u16 cntxt_id; /* SGE context id for the response q */
+ u16 abs_id; /* absolute SGE id for the response q */
+ __be64 *desc; /* address of HW response ring */
+ dma_addr_t phys_addr; /* physical address of the ring */
+ unsigned int iqe_len; /* entry size */
+ unsigned int size; /* capacity of response queue */
+ struct adapter *adap;
+ struct net_device *netdev; /* associated net device */
+ rspq_handler_t handler;
+};
+
+struct sge_eth_stats { /* Ethernet queue statistics */
+ unsigned long pkts; /* # of ethernet packets */
+ unsigned long lro_pkts; /* # of LRO super packets */
+ unsigned long lro_merged; /* # of wire packets merged by LRO */
+ unsigned long rx_cso; /* # of Rx checksum offloads */
+ unsigned long vlan_ex; /* # of Rx VLAN extractions */
+ unsigned long rx_drops; /* # of packets dropped due to no mem */
+};
+
+struct sge_eth_rxq { /* SW Ethernet Rx queue */
+ struct sge_rspq rspq;
+ struct sge_fl fl;
+ struct sge_eth_stats stats;
+} ____cacheline_aligned_in_smp;
+
+struct sge_ofld_stats { /* offload queue statistics */
+ unsigned long pkts; /* # of packets */
+ unsigned long imm; /* # of immediate-data packets */
+ unsigned long an; /* # of asynchronous notifications */
+ unsigned long nomem; /* # of responses deferred due to no mem */
+};
+
+struct sge_ofld_rxq { /* SW offload Rx queue */
+ struct sge_rspq rspq;
+ struct sge_fl fl;
+ struct sge_ofld_stats stats;
+} ____cacheline_aligned_in_smp;
+
+struct tx_desc {
+ __be64 flit[8];
+};
+
+struct tx_sw_desc;
+
+struct sge_txq {
+ unsigned int in_use; /* # of in-use Tx descriptors */
+ unsigned int size; /* # of descriptors */
+ unsigned int cidx; /* SW consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned long stops; /* # of times q has been stopped */
+ unsigned long restarts; /* # of queue restarts */
+ unsigned int cntxt_id; /* SGE context id for the Tx q */
+ struct tx_desc *desc; /* address of HW Tx descriptor ring */
+ struct tx_sw_desc *sdesc; /* address of SW Tx descriptor ring */
+ struct sge_qstat *stat; /* queue status entry */
+ dma_addr_t phys_addr; /* physical address of the ring */
+};
+
+struct sge_eth_txq { /* state for an SGE Ethernet Tx queue */
+ struct sge_txq q;
+ struct netdev_queue *txq; /* associated netdev TX queue */
+ unsigned long tso; /* # of TSO requests */
+ unsigned long tx_cso; /* # of Tx checksum offloads */
+ unsigned long vlan_ins; /* # of Tx VLAN insertions */
+ unsigned long mapping_err; /* # of I/O MMU packet mapping errors */
+} ____cacheline_aligned_in_smp;
+
+struct sge_ofld_txq { /* state for an SGE offload Tx queue */
+ struct sge_txq q;
+ struct adapter *adap;
+ struct sk_buff_head sendq; /* list of backpressured packets */
+ struct tasklet_struct qresume_tsk; /* restarts the queue */
+ u8 full; /* the Tx ring is full */
+ unsigned long mapping_err; /* # of I/O MMU packet mapping errors */
+} ____cacheline_aligned_in_smp;
+
+struct sge_ctrl_txq { /* state for an SGE control Tx queue */
+ struct sge_txq q;
+ struct adapter *adap;
+ struct sk_buff_head sendq; /* list of backpressured packets */
+ struct tasklet_struct qresume_tsk; /* restarts the queue */
+ u8 full; /* the Tx ring is full */
+} ____cacheline_aligned_in_smp;
+
+struct sge {
+ struct sge_eth_txq ethtxq[MAX_ETH_QSETS];
+ struct sge_ofld_txq ofldtxq[MAX_OFLD_QSETS];
+ struct sge_ctrl_txq ctrlq[MAX_CTRL_QUEUES];
+
+ struct sge_eth_rxq ethrxq[MAX_ETH_QSETS];
+ struct sge_ofld_rxq ofldrxq[MAX_OFLD_QSETS];
+ struct sge_ofld_rxq rdmarxq[MAX_RDMA_QUEUES];
+ struct sge_rspq fw_evtq ____cacheline_aligned_in_smp;
+
+ struct sge_rspq intrq ____cacheline_aligned_in_smp;
+ spinlock_t intrq_lock;
+
+ u16 max_ethqsets; /* # of available Ethernet queue sets */
+ u16 ethqsets; /* # of active Ethernet queue sets */
+ u16 ethtxq_rover; /* Tx queue to clean up next */
+ u16 ofldqsets; /* # of active offload queue sets */
+ u16 rdmaqs; /* # of available RDMA Rx queues */
+ u16 ofld_rxq[MAX_OFLD_QSETS];
+ u16 rdma_rxq[NCHAN];
+ u16 timer_val[SGE_NTIMERS];
+ u8 counter_val[SGE_NCOUNTERS];
+ unsigned int starve_thres;
+ u8 idma_state[2];
+ void *egr_map[MAX_EGRQ]; /* qid->queue egress queue map */
+ struct sge_rspq *ingr_map[MAX_INGQ]; /* qid->queue ingress queue map */
+ DECLARE_BITMAP(starving_fl, MAX_EGRQ);
+ DECLARE_BITMAP(txq_maperr, MAX_EGRQ);
+ struct timer_list rx_timer; /* refills starving FLs */
+ struct timer_list tx_timer; /* checks Tx queues */
+};
+
+#define for_each_ethrxq(sge, i) for (i = 0; i < (sge)->ethqsets; i++)
+#define for_each_ofldrxq(sge, i) for (i = 0; i < (sge)->ofldqsets; i++)
+#define for_each_rdmarxq(sge, i) for (i = 0; i < (sge)->rdmaqs; i++)
+
+struct l2t_data;
+
+struct adapter {
+ void __iomem *regs;
+ struct pci_dev *pdev;
+ struct device *pdev_dev;
+ unsigned long registered_device_map;
+ unsigned long open_device_map;
+ unsigned long flags;
+
+ const char *name;
+ int msg_enable;
+
+ struct adapter_params params;
+ struct cxgb4_virt_res vres;
+ unsigned int swintr;
+
+ unsigned int wol;
+
+ struct {
+ unsigned short vec;
+ char desc[14];
+ } msix_info[MAX_INGQ + 1];
+
+ struct sge sge;
+
+ struct net_device *port[MAX_NPORTS];
+ u8 chan_map[NCHAN]; /* channel -> port map */
+
+ struct l2t_data *l2t;
+ void *uld_handle[CXGB4_ULD_MAX];
+ struct list_head list_node;
+
+ struct tid_info tids;
+ void **tid_release_head;
+ spinlock_t tid_release_lock;
+ struct work_struct tid_release_task;
+ bool tid_release_task_busy;
+
+ struct dentry *debugfs_root;
+
+ spinlock_t stats_lock;
+};
+
+static inline u32 t4_read_reg(struct adapter *adap, u32 reg_addr)
+{
+ return readl(adap->regs + reg_addr);
+}
+
+static inline void t4_write_reg(struct adapter *adap, u32 reg_addr, u32 val)
+{
+ writel(val, adap->regs + reg_addr);
+}
+
+#ifndef readq
+static inline u64 readq(const volatile void __iomem *addr)
+{
+ return readl(addr) + ((u64)readl(addr + 4) << 32);
+}
+
+static inline void writeq(u64 val, volatile void __iomem *addr)
+{
+ writel(val, addr);
+ writel(val >> 32, addr + 4);
+}
+#endif
+
+static inline u64 t4_read_reg64(struct adapter *adap, u32 reg_addr)
+{
+ return readq(adap->regs + reg_addr);
+}
+
+static inline void t4_write_reg64(struct adapter *adap, u32 reg_addr, u64 val)
+{
+ writeq(val, adap->regs + reg_addr);
+}
+
+/**
+ * netdev2pinfo - return the port_info structure associated with a net_device
+ * @dev: the netdev
+ *
+ * Return the struct port_info associated with a net_device
+ */
+static inline struct port_info *netdev2pinfo(const struct net_device *dev)
+{
+ return netdev_priv(dev);
+}
+
+/**
+ * adap2pinfo - return the port_info of a port
+ * @adap: the adapter
+ * @idx: the port index
+ *
+ * Return the port_info structure for the port of the given index.
+ */
+static inline struct port_info *adap2pinfo(struct adapter *adap, int idx)
+{
+ return netdev_priv(adap->port[idx]);
+}
+
+/**
+ * netdev2adap - return the adapter structure associated with a net_device
+ * @dev: the netdev
+ *
+ * Return the struct adapter associated with a net_device
+ */
+static inline struct adapter *netdev2adap(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->adapter;
+}
+
+void t4_os_portmod_changed(const struct adapter *adap, int port_id);
+void t4_os_link_changed(struct adapter *adap, int port_id, int link_stat);
+
+void *t4_alloc_mem(size_t size);
+void t4_free_mem(void *addr);
+
+void t4_free_sge_resources(struct adapter *adap);
+irq_handler_t t4_intr_handler(struct adapter *adap);
+netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev);
+int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl);
+int t4_mgmt_tx(struct adapter *adap, struct sk_buff *skb);
+int t4_ofld_send(struct adapter *adap, struct sk_buff *skb);
+int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
+ struct net_device *dev, int intr_idx,
+ struct sge_fl *fl, rspq_handler_t hnd);
+int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
+ struct net_device *dev, struct netdev_queue *netdevq,
+ unsigned int iqid);
+int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
+ struct net_device *dev, unsigned int iqid,
+ unsigned int cmplqid);
+int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
+ struct net_device *dev, unsigned int iqid);
+irqreturn_t t4_sge_intr_msix(int irq, void *cookie);
+void t4_sge_init(struct adapter *adap);
+void t4_sge_start(struct adapter *adap);
+void t4_sge_stop(struct adapter *adap);
+
+#define for_each_port(adapter, iter) \
+ for (iter = 0; iter < (adapter)->params.nports; ++iter)
+
+static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
+{
+ return adap->params.vpd.cclk / 1000;
+}
+
+static inline unsigned int us_to_core_ticks(const struct adapter *adap,
+ unsigned int us)
+{
+ return (us * adap->params.vpd.cclk) / 1000;
+}
+
+void t4_set_reg_field(struct adapter *adap, unsigned int addr, u32 mask,
+ u32 val);
+
+int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
+ void *rpl, bool sleep_ok);
+
+static inline int t4_wr_mbox(struct adapter *adap, int mbox, const void *cmd,
+ int size, void *rpl)
+{
+ return t4_wr_mbox_meat(adap, mbox, cmd, size, rpl, true);
+}
+
+static inline int t4_wr_mbox_ns(struct adapter *adap, int mbox, const void *cmd,
+ int size, void *rpl)
+{
+ return t4_wr_mbox_meat(adap, mbox, cmd, size, rpl, false);
+}
+
+void t4_intr_enable(struct adapter *adapter);
+void t4_intr_disable(struct adapter *adapter);
+void t4_intr_clear(struct adapter *adapter);
+int t4_slow_intr_handler(struct adapter *adapter);
+
+int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port,
+ struct link_config *lc);
+int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port);
+int t4_seeprom_wp(struct adapter *adapter, bool enable);
+int t4_read_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int nwords, u32 *data, int byte_oriented);
+int t4_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size);
+int t4_check_fw_version(struct adapter *adapter);
+int t4_prep_adapter(struct adapter *adapter);
+int t4_port_init(struct adapter *adap, int mbox, int pf, int vf);
+void t4_fatal_err(struct adapter *adapter);
+void t4_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on);
+int t4_set_trace_filter(struct adapter *adapter, const struct trace_params *tp,
+ int filter_index, int enable);
+void t4_get_trace_filter(struct adapter *adapter, struct trace_params *tp,
+ int filter_index, int *enabled);
+int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
+ int start, int n, const u16 *rspq, unsigned int nrspq);
+int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode,
+ unsigned int flags);
+int t4_read_rss(struct adapter *adapter, u16 *entries);
+int t4_mc_read(struct adapter *adap, u32 addr, __be32 *data, u64 *parity);
+int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data,
+ u64 *parity);
+
+void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p);
+void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p);
+
+void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log);
+void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st);
+void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
+ struct tp_tcp_stats *v6);
+void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
+ const unsigned short *alpha, const unsigned short *beta);
+
+void t4_wol_magic_enable(struct adapter *adap, unsigned int port,
+ const u8 *addr);
+int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map,
+ u64 mask0, u64 mask1, unsigned int crc, bool enable);
+
+int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
+ enum dev_master master, enum dev_state *state);
+int t4_fw_bye(struct adapter *adap, unsigned int mbox);
+int t4_early_init(struct adapter *adap, unsigned int mbox);
+int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset);
+int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int nparams, const u32 *params,
+ u32 *val);
+int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int nparams, const u32 *params,
+ const u32 *val);
+int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
+ unsigned int rxqi, unsigned int rxq, unsigned int tc,
+ unsigned int vi, unsigned int cmask, unsigned int pmask,
+ unsigned int nexact, unsigned int rcaps, unsigned int wxcaps);
+int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
+ unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
+ unsigned int *rss_size);
+int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int viid);
+int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ int mtu, int promisc, int all_multi, int bcast, bool sleep_ok);
+int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
+ unsigned int viid, bool free, unsigned int naddr,
+ const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok);
+int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ int idx, const u8 *addr, bool persist, bool add_smt);
+int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ bool ucast, u64 vec, bool sleep_ok);
+int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ bool rx_en, bool tx_en);
+int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ unsigned int nblinks);
+int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
+ unsigned int mmd, unsigned int reg, u16 *valp);
+int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
+ unsigned int mmd, unsigned int reg, u16 val);
+int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start,
+ unsigned int pf, unsigned int vf, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id);
+int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int iqtype, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id);
+int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid);
+int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid);
+int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid);
+int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl);
+#endif /* __CXGB4_H__ */
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/crc32.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/etherdevice.h>
+#include <linux/firmware.h>
+#include <linux/if_vlan.h>
+#include <linux/init.h>
+#include <linux/log2.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/mutex.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/aer.h>
+#include <linux/rtnetlink.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+#include <linux/sockios.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <net/neighbour.h>
+#include <net/netevent.h>
+#include <asm/uaccess.h>
+
+#include "cxgb4.h"
+#include "t4_regs.h"
+#include "t4_msg.h"
+#include "t4fw_api.h"
+#include "l2t.h"
+
+#define DRV_VERSION "1.0.0-ko"
+#define DRV_DESC "Chelsio T4 Network Driver"
+
+/*
+ * Max interrupt hold-off timer value in us. Queues fall back to this value
+ * under extreme memory pressure so it's largish to give the system time to
+ * recover.
+ */
+#define MAX_SGE_TIMERVAL 200U
+
+enum {
+ MEMWIN0_APERTURE = 65536,
+ MEMWIN0_BASE = 0x30000,
+ MEMWIN1_APERTURE = 32768,
+ MEMWIN1_BASE = 0x28000,
+ MEMWIN2_APERTURE = 2048,
+ MEMWIN2_BASE = 0x1b800,
+};
+
+enum {
+ MAX_TXQ_ENTRIES = 16384,
+ MAX_CTRL_TXQ_ENTRIES = 1024,
+ MAX_RSPQ_ENTRIES = 16384,
+ MAX_RX_BUFFERS = 16384,
+ MIN_TXQ_ENTRIES = 32,
+ MIN_CTRL_TXQ_ENTRIES = 32,
+ MIN_RSPQ_ENTRIES = 128,
+ MIN_FL_ENTRIES = 16
+};
+
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+#define CH_DEVICE(devid) { PCI_VDEVICE(CHELSIO, devid), 0 }
+
+static DEFINE_PCI_DEVICE_TABLE(cxgb4_pci_tbl) = {
+ CH_DEVICE(0xa000), /* PE10K */
+ { 0, }
+};
+
+#define FW_FNAME "cxgb4/t4fw.bin"
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, cxgb4_pci_tbl);
+MODULE_FIRMWARE(FW_FNAME);
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+module_param(dflt_msg_enable, int, 0644);
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T4 default message enable bitmap");
+
+/*
+ * The driver uses the best interrupt scheme available on a platform in the
+ * order MSI-X, MSI, legacy INTx interrupts. This parameter determines which
+ * of these schemes the driver may consider as follows:
+ *
+ * msi = 2: choose from among all three options
+ * msi = 1: only consider MSI and INTx interrupts
+ * msi = 0: force INTx interrupts
+ */
+static int msi = 2;
+
+module_param(msi, int, 0644);
+MODULE_PARM_DESC(msi, "whether to use INTx (0), MSI (1) or MSI-X (2)");
+
+/*
+ * Queue interrupt hold-off timer values. Queues default to the first of these
+ * upon creation.
+ */
+static unsigned int intr_holdoff[SGE_NTIMERS - 1] = { 5, 10, 20, 50, 100 };
+
+module_param_array(intr_holdoff, uint, NULL, 0644);
+MODULE_PARM_DESC(intr_holdoff, "values for queue interrupt hold-off timers "
+ "0..4 in microseconds");
+
+static unsigned int intr_cnt[SGE_NCOUNTERS - 1] = { 4, 8, 16 };
+
+module_param_array(intr_cnt, uint, NULL, 0644);
+MODULE_PARM_DESC(intr_cnt,
+ "thresholds 1..3 for queue interrupt packet counters");
+
+static int vf_acls;
+
+#ifdef CONFIG_PCI_IOV
+module_param(vf_acls, bool, 0644);
+MODULE_PARM_DESC(vf_acls, "if set enable virtualization L2 ACL enforcement");
+
+static unsigned int num_vf[4];
+
+module_param_array(num_vf, uint, NULL, 0644);
+MODULE_PARM_DESC(num_vf, "number of VFs for each of PFs 0-3");
+#endif
+
+static struct dentry *cxgb4_debugfs_root;
+
+static LIST_HEAD(adapter_list);
+static DEFINE_MUTEX(uld_mutex);
+static struct cxgb4_uld_info ulds[CXGB4_ULD_MAX];
+static const char *uld_str[] = { "RDMA", "iSCSI" };
+
+static void link_report(struct net_device *dev)
+{
+ if (!netif_carrier_ok(dev))
+ netdev_info(dev, "link down\n");
+ else {
+ static const char *fc[] = { "no", "Rx", "Tx", "Tx/Rx" };
+
+ const char *s = "10Mbps";
+ const struct port_info *p = netdev_priv(dev);
+
+ switch (p->link_cfg.speed) {
+ case SPEED_10000:
+ s = "10Gbps";
+ break;
+ case SPEED_1000:
+ s = "1000Mbps";
+ break;
+ case SPEED_100:
+ s = "100Mbps";
+ break;
+ }
+
+ netdev_info(dev, "link up, %s, full-duplex, %s PAUSE\n", s,
+ fc[p->link_cfg.fc]);
+ }
+}
+
+void t4_os_link_changed(struct adapter *adapter, int port_id, int link_stat)
+{
+ struct net_device *dev = adapter->port[port_id];
+
+ /* Skip changes from disabled ports. */
+ if (netif_running(dev) && link_stat != netif_carrier_ok(dev)) {
+ if (link_stat)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+
+ link_report(dev);
+ }
+}
+
+void t4_os_portmod_changed(const struct adapter *adap, int port_id)
+{
+ static const char *mod_str[] = {
+ NULL, "LR", "SR", "ER", "passive DA", "active DA"
+ };
+
+ const struct net_device *dev = adap->port[port_id];
+ const struct port_info *pi = netdev_priv(dev);
+
+ if (pi->mod_type == FW_PORT_MOD_TYPE_NONE)
+ netdev_info(dev, "port module unplugged\n");
+ else
+ netdev_info(dev, "%s module inserted\n", mod_str[pi->mod_type]);
+}
+
+/*
+ * Configure the exact and hash address filters to handle a port's multicast
+ * and secondary unicast MAC addresses.
+ */
+static int set_addr_filters(const struct net_device *dev, bool sleep)
+{
+ u64 mhash = 0;
+ u64 uhash = 0;
+ bool free = true;
+ u16 filt_idx[7];
+ const u8 *addr[7];
+ int ret, naddr = 0;
+ const struct dev_addr_list *d;
+ const struct netdev_hw_addr *ha;
+ int uc_cnt = netdev_uc_count(dev);
+ const struct port_info *pi = netdev_priv(dev);
+
+ /* first do the secondary unicast addresses */
+ netdev_for_each_uc_addr(ha, dev) {
+ addr[naddr++] = ha->addr;
+ if (--uc_cnt == 0 || naddr >= ARRAY_SIZE(addr)) {
+ ret = t4_alloc_mac_filt(pi->adapter, 0, pi->viid, free,
+ naddr, addr, filt_idx, &uhash, sleep);
+ if (ret < 0)
+ return ret;
+
+ free = false;
+ naddr = 0;
+ }
+ }
+
+ /* next set up the multicast addresses */
+ netdev_for_each_mc_addr(d, dev) {
+ addr[naddr++] = d->dmi_addr;
+ if (naddr >= ARRAY_SIZE(addr) || d->next == NULL) {
+ ret = t4_alloc_mac_filt(pi->adapter, 0, pi->viid, free,
+ naddr, addr, filt_idx, &mhash, sleep);
+ if (ret < 0)
+ return ret;
+
+ free = false;
+ naddr = 0;
+ }
+ }
+
+ return t4_set_addr_hash(pi->adapter, 0, pi->viid, uhash != 0,
+ uhash | mhash, sleep);
+}
+
+/*
+ * Set Rx properties of a port, such as promiscruity, address filters, and MTU.
+ * If @mtu is -1 it is left unchanged.
+ */
+static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ ret = set_addr_filters(dev, sleep_ok);
+ if (ret == 0)
+ ret = t4_set_rxmode(pi->adapter, 0, pi->viid, mtu,
+ (dev->flags & IFF_PROMISC) ? 1 : 0,
+ (dev->flags & IFF_ALLMULTI) ? 1 : 0, 1,
+ sleep_ok);
+ return ret;
+}
+
+/**
+ * link_start - enable a port
+ * @dev: the port to enable
+ *
+ * Performs the MAC and PHY actions needed to enable a port.
+ */
+static int link_start(struct net_device *dev)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ /*
+ * We do not set address filters and promiscuity here, the stack does
+ * that step explicitly.
+ */
+ ret = t4_set_rxmode(pi->adapter, 0, pi->viid, dev->mtu, -1, -1, -1,
+ true);
+ if (ret == 0) {
+ ret = t4_change_mac(pi->adapter, 0, pi->viid,
+ pi->xact_addr_filt, dev->dev_addr, true,
+ false);
+ if (ret >= 0) {
+ pi->xact_addr_filt = ret;
+ ret = 0;
+ }
+ }
+ if (ret == 0)
+ ret = t4_link_start(pi->adapter, 0, pi->tx_chan, &pi->link_cfg);
+ if (ret == 0)
+ ret = t4_enable_vi(pi->adapter, 0, pi->viid, true, true);
+ return ret;
+}
+
+/*
+ * Response queue handler for the FW event queue.
+ */
+static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl)
+{
+ u8 opcode = ((const struct rss_header *)rsp)->opcode;
+
+ rsp++; /* skip RSS header */
+ if (likely(opcode == CPL_SGE_EGR_UPDATE)) {
+ const struct cpl_sge_egr_update *p = (void *)rsp;
+ unsigned int qid = EGR_QID(ntohl(p->opcode_qid));
+ struct sge_txq *txq = q->adap->sge.egr_map[qid];
+
+ txq->restarts++;
+ if ((u8 *)txq < (u8 *)q->adap->sge.ethrxq) {
+ struct sge_eth_txq *eq;
+
+ eq = container_of(txq, struct sge_eth_txq, q);
+ netif_tx_wake_queue(eq->txq);
+ } else {
+ struct sge_ofld_txq *oq;
+
+ oq = container_of(txq, struct sge_ofld_txq, q);
+ tasklet_schedule(&oq->qresume_tsk);
+ }
+ } else if (opcode == CPL_FW6_MSG || opcode == CPL_FW4_MSG) {
+ const struct cpl_fw6_msg *p = (void *)rsp;
+
+ if (p->type == 0)
+ t4_handle_fw_rpl(q->adap, p->data);
+ } else if (opcode == CPL_L2T_WRITE_RPL) {
+ const struct cpl_l2t_write_rpl *p = (void *)rsp;
+
+ do_l2t_write_rpl(q->adap, p);
+ } else
+ dev_err(q->adap->pdev_dev,
+ "unexpected CPL %#x on FW event queue\n", opcode);
+ return 0;
+}
+
+/**
+ * uldrx_handler - response queue handler for ULD queues
+ * @q: the response queue that received the packet
+ * @rsp: the response queue descriptor holding the offload message
+ * @gl: the gather list of packet fragments
+ *
+ * Deliver an ingress offload packet to a ULD. All processing is done by
+ * the ULD, we just maintain statistics.
+ */
+static int uldrx_handler(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *gl)
+{
+ struct sge_ofld_rxq *rxq = container_of(q, struct sge_ofld_rxq, rspq);
+
+ if (ulds[q->uld].rx_handler(q->adap->uld_handle[q->uld], rsp, gl)) {
+ rxq->stats.nomem++;
+ return -1;
+ }
+ if (gl == NULL)
+ rxq->stats.imm++;
+ else if (gl == CXGB4_MSG_AN)
+ rxq->stats.an++;
+ else
+ rxq->stats.pkts++;
+ return 0;
+}
+
+static void disable_msi(struct adapter *adapter)
+{
+ if (adapter->flags & USING_MSIX) {
+ pci_disable_msix(adapter->pdev);
+ adapter->flags &= ~USING_MSIX;
+ } else if (adapter->flags & USING_MSI) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~USING_MSI;
+ }
+}
+
+/*
+ * Interrupt handler for non-data events used with MSI-X.
+ */
+static irqreturn_t t4_nondata_intr(int irq, void *cookie)
+{
+ struct adapter *adap = cookie;
+
+ u32 v = t4_read_reg(adap, MYPF_REG(PL_PF_INT_CAUSE));
+ if (v & PFSW) {
+ adap->swintr = 1;
+ t4_write_reg(adap, MYPF_REG(PL_PF_INT_CAUSE), v);
+ }
+ t4_slow_intr_handler(adap);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Name the MSI-X interrupts.
+ */
+static void name_msix_vecs(struct adapter *adap)
+{
+ int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc) - 1;
+
+ /* non-data interrupts */
+ snprintf(adap->msix_info[0].desc, n, "%s", adap->name);
+ adap->msix_info[0].desc[n] = 0;
+
+ /* FW events */
+ snprintf(adap->msix_info[1].desc, n, "%s-FWeventq", adap->name);
+ adap->msix_info[1].desc[n] = 0;
+
+ /* Ethernet queues */
+ for_each_port(adap, j) {
+ struct net_device *d = adap->port[j];
+ const struct port_info *pi = netdev_priv(d);
+
+ for (i = 0; i < pi->nqsets; i++, msi_idx++) {
+ snprintf(adap->msix_info[msi_idx].desc, n, "%s-Rx%d",
+ d->name, i);
+ adap->msix_info[msi_idx].desc[n] = 0;
+ }
+ }
+
+ /* offload queues */
+ for_each_ofldrxq(&adap->sge, i) {
+ snprintf(adap->msix_info[msi_idx].desc, n, "%s-ofld%d",
+ adap->name, i);
+ adap->msix_info[msi_idx++].desc[n] = 0;
+ }
+ for_each_rdmarxq(&adap->sge, i) {
+ snprintf(adap->msix_info[msi_idx].desc, n, "%s-rdma%d",
+ adap->name, i);
+ adap->msix_info[msi_idx++].desc[n] = 0;
+ }
+}
+
+static int request_msix_queue_irqs(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+ int err, ethqidx, ofldqidx = 0, rdmaqidx = 0, msi = 2;
+
+ err = request_irq(adap->msix_info[1].vec, t4_sge_intr_msix, 0,
+ adap->msix_info[1].desc, &s->fw_evtq);
+ if (err)
+ return err;
+
+ for_each_ethrxq(s, ethqidx) {
+ err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0,
+ adap->msix_info[msi].desc,
+ &s->ethrxq[ethqidx].rspq);
+ if (err)
+ goto unwind;
+ msi++;
+ }
+ for_each_ofldrxq(s, ofldqidx) {
+ err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0,
+ adap->msix_info[msi].desc,
+ &s->ofldrxq[ofldqidx].rspq);
+ if (err)
+ goto unwind;
+ msi++;
+ }
+ for_each_rdmarxq(s, rdmaqidx) {
+ err = request_irq(adap->msix_info[msi].vec, t4_sge_intr_msix, 0,
+ adap->msix_info[msi].desc,
+ &s->rdmarxq[rdmaqidx].rspq);
+ if (err)
+ goto unwind;
+ msi++;
+ }
+ return 0;
+
+unwind:
+ while (--rdmaqidx >= 0)
+ free_irq(adap->msix_info[--msi].vec,
+ &s->rdmarxq[rdmaqidx].rspq);
+ while (--ofldqidx >= 0)
+ free_irq(adap->msix_info[--msi].vec,
+ &s->ofldrxq[ofldqidx].rspq);
+ while (--ethqidx >= 0)
+ free_irq(adap->msix_info[--msi].vec, &s->ethrxq[ethqidx].rspq);
+ free_irq(adap->msix_info[1].vec, &s->fw_evtq);
+ return err;
+}
+
+static void free_msix_queue_irqs(struct adapter *adap)
+{
+ int i, msi = 2;
+ struct sge *s = &adap->sge;
+
+ free_irq(adap->msix_info[1].vec, &s->fw_evtq);
+ for_each_ethrxq(s, i)
+ free_irq(adap->msix_info[msi++].vec, &s->ethrxq[i].rspq);
+ for_each_ofldrxq(s, i)
+ free_irq(adap->msix_info[msi++].vec, &s->ofldrxq[i].rspq);
+ for_each_rdmarxq(s, i)
+ free_irq(adap->msix_info[msi++].vec, &s->rdmarxq[i].rspq);
+}
+
+/**
+ * setup_rss - configure RSS
+ * @adap: the adapter
+ *
+ * Sets up RSS to distribute packets to multiple receive queues. We
+ * configure the RSS CPU lookup table to distribute to the number of HW
+ * receive queues, and the response queue lookup table to narrow that
+ * down to the response queues actually configured for each port.
+ * We always configure the RSS mapping for all ports since the mapping
+ * table has plenty of entries.
+ */
+static int setup_rss(struct adapter *adap)
+{
+ int i, j, err;
+ u16 rss[MAX_ETH_QSETS];
+
+ for_each_port(adap, i) {
+ const struct port_info *pi = adap2pinfo(adap, i);
+ const struct sge_eth_rxq *q = &adap->sge.ethrxq[pi->first_qset];
+
+ for (j = 0; j < pi->nqsets; j++)
+ rss[j] = q[j].rspq.abs_id;
+
+ err = t4_config_rss_range(adap, 0, pi->viid, 0, pi->rss_size,
+ rss, pi->nqsets);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+/*
+ * Wait until all NAPI handlers are descheduled.
+ */
+static void quiesce_rx(struct adapter *adap)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) {
+ struct sge_rspq *q = adap->sge.ingr_map[i];
+
+ if (q && q->handler)
+ napi_disable(&q->napi);
+ }
+}
+
+/*
+ * Enable NAPI scheduling and interrupt generation for all Rx queues.
+ */
+static void enable_rx(struct adapter *adap)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(adap->sge.ingr_map); i++) {
+ struct sge_rspq *q = adap->sge.ingr_map[i];
+
+ if (!q)
+ continue;
+ if (q->handler)
+ napi_enable(&q->napi);
+ /* 0-increment GTS to start the timer and enable interrupts */
+ t4_write_reg(adap, MYPF_REG(SGE_PF_GTS),
+ SEINTARM(q->intr_params) |
+ INGRESSQID(q->cntxt_id));
+ }
+}
+
+/**
+ * setup_sge_queues - configure SGE Tx/Rx/response queues
+ * @adap: the adapter
+ *
+ * Determines how many sets of SGE queues to use and initializes them.
+ * We support multiple queue sets per port if we have MSI-X, otherwise
+ * just one queue set per port.
+ */
+static int setup_sge_queues(struct adapter *adap)
+{
+ int err, msi_idx, i, j;
+ struct sge *s = &adap->sge;
+
+ bitmap_zero(s->starving_fl, MAX_EGRQ);
+ bitmap_zero(s->txq_maperr, MAX_EGRQ);
+
+ if (adap->flags & USING_MSIX)
+ msi_idx = 1; /* vector 0 is for non-queue interrupts */
+ else {
+ err = t4_sge_alloc_rxq(adap, &s->intrq, false, adap->port[0], 0,
+ NULL, NULL);
+ if (err)
+ return err;
+ msi_idx = -((int)s->intrq.abs_id + 1);
+ }
+
+ err = t4_sge_alloc_rxq(adap, &s->fw_evtq, true, adap->port[0],
+ msi_idx, NULL, fwevtq_handler);
+ if (err) {
+freeout: t4_free_sge_resources(adap);
+ return err;
+ }
+
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+ struct port_info *pi = netdev_priv(dev);
+ struct sge_eth_rxq *q = &s->ethrxq[pi->first_qset];
+ struct sge_eth_txq *t = &s->ethtxq[pi->first_qset];
+
+ for (j = 0; j < pi->nqsets; j++, q++) {
+ if (msi_idx > 0)
+ msi_idx++;
+ err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev,
+ msi_idx, &q->fl,
+ t4_ethrx_handler);
+ if (err)
+ goto freeout;
+ q->rspq.idx = j;
+ memset(&q->stats, 0, sizeof(q->stats));
+ }
+ for (j = 0; j < pi->nqsets; j++, t++) {
+ err = t4_sge_alloc_eth_txq(adap, t, dev,
+ netdev_get_tx_queue(dev, j),
+ s->fw_evtq.cntxt_id);
+ if (err)
+ goto freeout;
+ }
+ }
+
+ j = s->ofldqsets / adap->params.nports; /* ofld queues per channel */
+ for_each_ofldrxq(s, i) {
+ struct sge_ofld_rxq *q = &s->ofldrxq[i];
+ struct net_device *dev = adap->port[i / j];
+
+ if (msi_idx > 0)
+ msi_idx++;
+ err = t4_sge_alloc_rxq(adap, &q->rspq, false, dev, msi_idx,
+ &q->fl, uldrx_handler);
+ if (err)
+ goto freeout;
+ memset(&q->stats, 0, sizeof(q->stats));
+ s->ofld_rxq[i] = q->rspq.abs_id;
+ err = t4_sge_alloc_ofld_txq(adap, &s->ofldtxq[i], dev,
+ s->fw_evtq.cntxt_id);
+ if (err)
+ goto freeout;
+ }
+
+ for_each_rdmarxq(s, i) {
+ struct sge_ofld_rxq *q = &s->rdmarxq[i];
+
+ if (msi_idx > 0)
+ msi_idx++;
+ err = t4_sge_alloc_rxq(adap, &q->rspq, false, adap->port[i],
+ msi_idx, &q->fl, uldrx_handler);
+ if (err)
+ goto freeout;
+ memset(&q->stats, 0, sizeof(q->stats));
+ s->rdma_rxq[i] = q->rspq.abs_id;
+ }
+
+ for_each_port(adap, i) {
+ /*
+ * Note that ->rdmarxq[i].rspq.cntxt_id below is 0 if we don't
+ * have RDMA queues, and that's the right value.
+ */
+ err = t4_sge_alloc_ctrl_txq(adap, &s->ctrlq[i], adap->port[i],
+ s->fw_evtq.cntxt_id,
+ s->rdmarxq[i].rspq.cntxt_id);
+ if (err)
+ goto freeout;
+ }
+
+ t4_write_reg(adap, MPS_TRC_RSS_CONTROL,
+ RSSCONTROL(netdev2pinfo(adap->port[0])->tx_chan) |
+ QUEUENUMBER(s->ethrxq[0].rspq.abs_id));
+ return 0;
+}
+
+/*
+ * Returns 0 if new FW was successfully loaded, a positive errno if a load was
+ * started but failed, and a negative errno if flash load couldn't start.
+ */
+static int upgrade_fw(struct adapter *adap)
+{
+ int ret;
+ u32 vers;
+ const struct fw_hdr *hdr;
+ const struct firmware *fw;
+ struct device *dev = adap->pdev_dev;
+
+ ret = request_firmware(&fw, FW_FNAME, dev);
+ if (ret < 0) {
+ dev_err(dev, "unable to load firmware image " FW_FNAME
+ ", error %d\n", ret);
+ return ret;
+ }
+
+ hdr = (const struct fw_hdr *)fw->data;
+ vers = ntohl(hdr->fw_ver);
+ if (FW_HDR_FW_VER_MAJOR_GET(vers) != FW_VERSION_MAJOR) {
+ ret = -EINVAL; /* wrong major version, won't do */
+ goto out;
+ }
+
+ /*
+ * If the flash FW is unusable or we found something newer, load it.
+ */
+ if (FW_HDR_FW_VER_MAJOR_GET(adap->params.fw_vers) != FW_VERSION_MAJOR ||
+ vers > adap->params.fw_vers) {
+ ret = -t4_load_fw(adap, fw->data, fw->size);
+ if (!ret)
+ dev_info(dev, "firmware upgraded to version %pI4 from "
+ FW_FNAME "\n", &hdr->fw_ver);
+ }
+out: release_firmware(fw);
+ return ret;
+}
+
+/*
+ * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc.
+ * The allocated memory is cleared.
+ */
+void *t4_alloc_mem(size_t size)
+{
+ void *p = kmalloc(size, GFP_KERNEL);
+
+ if (!p)
+ p = vmalloc(size);
+ if (p)
+ memset(p, 0, size);
+ return p;
+}
+
+/*
+ * Free memory allocated through alloc_mem().
+ */
+void t4_free_mem(void *addr)
+{
+ if (is_vmalloc_addr(addr))
+ vfree(addr);
+ else
+ kfree(addr);
+}
+
+static inline int is_offload(const struct adapter *adap)
+{
+ return adap->params.offload;
+}
+
+/*
+ * Implementation of ethtool operations.
+ */
+
+static u32 get_msglevel(struct net_device *dev)
+{
+ return netdev2adap(dev)->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+ netdev2adap(dev)->msg_enable = val;
+}
+
+static char stats_strings[][ETH_GSTRING_LEN] = {
+ "TxOctetsOK ",
+ "TxFramesOK ",
+ "TxBroadcastFrames ",
+ "TxMulticastFrames ",
+ "TxUnicastFrames ",
+ "TxErrorFrames ",
+
+ "TxFrames64 ",
+ "TxFrames65To127 ",
+ "TxFrames128To255 ",
+ "TxFrames256To511 ",
+ "TxFrames512To1023 ",
+ "TxFrames1024To1518 ",
+ "TxFrames1519ToMax ",
+
+ "TxFramesDropped ",
+ "TxPauseFrames ",
+ "TxPPP0Frames ",
+ "TxPPP1Frames ",
+ "TxPPP2Frames ",
+ "TxPPP3Frames ",
+ "TxPPP4Frames ",
+ "TxPPP5Frames ",
+ "TxPPP6Frames ",
+ "TxPPP7Frames ",
+
+ "RxOctetsOK ",
+ "RxFramesOK ",
+ "RxBroadcastFrames ",
+ "RxMulticastFrames ",
+ "RxUnicastFrames ",
+
+ "RxFramesTooLong ",
+ "RxJabberErrors ",
+ "RxFCSErrors ",
+ "RxLengthErrors ",
+ "RxSymbolErrors ",
+ "RxRuntFrames ",
+
+ "RxFrames64 ",
+ "RxFrames65To127 ",
+ "RxFrames128To255 ",
+ "RxFrames256To511 ",
+ "RxFrames512To1023 ",
+ "RxFrames1024To1518 ",
+ "RxFrames1519ToMax ",
+
+ "RxPauseFrames ",
+ "RxPPP0Frames ",
+ "RxPPP1Frames ",
+ "RxPPP2Frames ",
+ "RxPPP3Frames ",
+ "RxPPP4Frames ",
+ "RxPPP5Frames ",
+ "RxPPP6Frames ",
+ "RxPPP7Frames ",
+
+ "RxBG0FramesDropped ",
+ "RxBG1FramesDropped ",
+ "RxBG2FramesDropped ",
+ "RxBG3FramesDropped ",
+ "RxBG0FramesTrunc ",
+ "RxBG1FramesTrunc ",
+ "RxBG2FramesTrunc ",
+ "RxBG3FramesTrunc ",
+
+ "TSO ",
+ "TxCsumOffload ",
+ "RxCsumGood ",
+ "VLANextractions ",
+ "VLANinsertions ",
+};
+
+static int get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(stats_strings);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+#define T4_REGMAP_SIZE (160 * 1024)
+
+static int get_regs_len(struct net_device *dev)
+{
+ return T4_REGMAP_SIZE;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+ return EEPROMSIZE;
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct adapter *adapter = netdev2adap(dev);
+
+ strcpy(info->driver, KBUILD_MODNAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(adapter->pdev));
+
+ if (!adapter->params.fw_vers)
+ strcpy(info->fw_version, "N/A");
+ else
+ snprintf(info->fw_version, sizeof(info->fw_version),
+ "%u.%u.%u.%u, TP %u.%u.%u.%u",
+ FW_HDR_FW_VER_MAJOR_GET(adapter->params.fw_vers),
+ FW_HDR_FW_VER_MINOR_GET(adapter->params.fw_vers),
+ FW_HDR_FW_VER_MICRO_GET(adapter->params.fw_vers),
+ FW_HDR_FW_VER_BUILD_GET(adapter->params.fw_vers),
+ FW_HDR_FW_VER_MAJOR_GET(adapter->params.tp_vers),
+ FW_HDR_FW_VER_MINOR_GET(adapter->params.tp_vers),
+ FW_HDR_FW_VER_MICRO_GET(adapter->params.tp_vers),
+ FW_HDR_FW_VER_BUILD_GET(adapter->params.tp_vers));
+}
+
+static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(data, stats_strings, sizeof(stats_strings));
+}
+
+/*
+ * port stats maintained per queue of the port. They should be in the same
+ * order as in stats_strings above.
+ */
+struct queue_port_stats {
+ u64 tso;
+ u64 tx_csum;
+ u64 rx_csum;
+ u64 vlan_ex;
+ u64 vlan_ins;
+};
+
+static void collect_sge_port_stats(const struct adapter *adap,
+ const struct port_info *p, struct queue_port_stats *s)
+{
+ int i;
+ const struct sge_eth_txq *tx = &adap->sge.ethtxq[p->first_qset];
+ const struct sge_eth_rxq *rx = &adap->sge.ethrxq[p->first_qset];
+
+ memset(s, 0, sizeof(*s));
+ for (i = 0; i < p->nqsets; i++, rx++, tx++) {
+ s->tso += tx->tso;
+ s->tx_csum += tx->tx_cso;
+ s->rx_csum += rx->stats.rx_cso;
+ s->vlan_ex += rx->stats.vlan_ex;
+ s->vlan_ins += tx->vlan_ins;
+ }
+}
+
+static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ t4_get_port_stats(adapter, pi->tx_chan, (struct port_stats *)data);
+
+ data += sizeof(struct port_stats) / sizeof(u64);
+ collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data);
+}
+
+/*
+ * Return a version number to identify the type of adapter. The scheme is:
+ * - bits 0..9: chip version
+ * - bits 10..15: chip revision
+ */
+static inline unsigned int mk_adap_vers(const struct adapter *ap)
+{
+ return 4 | (ap->params.rev << 10);
+}
+
+static void reg_block_dump(struct adapter *ap, void *buf, unsigned int start,
+ unsigned int end)
+{
+ u32 *p = buf + start;
+
+ for ( ; start <= end; start += sizeof(u32))
+ *p++ = t4_read_reg(ap, start);
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *buf)
+{
+ static const unsigned int reg_ranges[] = {
+ 0x1008, 0x1108,
+ 0x1180, 0x11b4,
+ 0x11fc, 0x123c,
+ 0x1300, 0x173c,
+ 0x1800, 0x18fc,
+ 0x3000, 0x30d8,
+ 0x30e0, 0x5924,
+ 0x5960, 0x59d4,
+ 0x5a00, 0x5af8,
+ 0x6000, 0x6098,
+ 0x6100, 0x6150,
+ 0x6200, 0x6208,
+ 0x6240, 0x6248,
+ 0x6280, 0x6338,
+ 0x6370, 0x638c,
+ 0x6400, 0x643c,
+ 0x6500, 0x6524,
+ 0x6a00, 0x6a38,
+ 0x6a60, 0x6a78,
+ 0x6b00, 0x6b84,
+ 0x6bf0, 0x6c84,
+ 0x6cf0, 0x6d84,
+ 0x6df0, 0x6e84,
+ 0x6ef0, 0x6f84,
+ 0x6ff0, 0x7084,
+ 0x70f0, 0x7184,
+ 0x71f0, 0x7284,
+ 0x72f0, 0x7384,
+ 0x73f0, 0x7450,
+ 0x7500, 0x7530,
+ 0x7600, 0x761c,
+ 0x7680, 0x76cc,
+ 0x7700, 0x7798,
+ 0x77c0, 0x77fc,
+ 0x7900, 0x79fc,
+ 0x7b00, 0x7c38,
+ 0x7d00, 0x7efc,
+ 0x8dc0, 0x8e1c,
+ 0x8e30, 0x8e78,
+ 0x8ea0, 0x8f6c,
+ 0x8fc0, 0x9074,
+ 0x90fc, 0x90fc,
+ 0x9400, 0x9458,
+ 0x9600, 0x96bc,
+ 0x9800, 0x9808,
+ 0x9820, 0x983c,
+ 0x9850, 0x9864,
+ 0x9c00, 0x9c6c,
+ 0x9c80, 0x9cec,
+ 0x9d00, 0x9d6c,
+ 0x9d80, 0x9dec,
+ 0x9e00, 0x9e6c,
+ 0x9e80, 0x9eec,
+ 0x9f00, 0x9f6c,
+ 0x9f80, 0x9fec,
+ 0xd004, 0xd03c,
+ 0xdfc0, 0xdfe0,
+ 0xe000, 0xea7c,
+ 0xf000, 0x11190,
+ 0x19040, 0x19124,
+ 0x19150, 0x191b0,
+ 0x191d0, 0x191e8,
+ 0x19238, 0x1924c,
+ 0x193f8, 0x19474,
+ 0x19490, 0x194f8,
+ 0x19800, 0x19f30,
+ 0x1a000, 0x1a06c,
+ 0x1a0b0, 0x1a120,
+ 0x1a128, 0x1a138,
+ 0x1a190, 0x1a1c4,
+ 0x1a1fc, 0x1a1fc,
+ 0x1e040, 0x1e04c,
+ 0x1e240, 0x1e28c,
+ 0x1e2c0, 0x1e2c0,
+ 0x1e2e0, 0x1e2e0,
+ 0x1e300, 0x1e384,
+ 0x1e3c0, 0x1e3c8,
+ 0x1e440, 0x1e44c,
+ 0x1e640, 0x1e68c,
+ 0x1e6c0, 0x1e6c0,
+ 0x1e6e0, 0x1e6e0,
+ 0x1e700, 0x1e784,
+ 0x1e7c0, 0x1e7c8,
+ 0x1e840, 0x1e84c,
+ 0x1ea40, 0x1ea8c,
+ 0x1eac0, 0x1eac0,
+ 0x1eae0, 0x1eae0,
+ 0x1eb00, 0x1eb84,
+ 0x1ebc0, 0x1ebc8,
+ 0x1ec40, 0x1ec4c,
+ 0x1ee40, 0x1ee8c,
+ 0x1eec0, 0x1eec0,
+ 0x1eee0, 0x1eee0,
+ 0x1ef00, 0x1ef84,
+ 0x1efc0, 0x1efc8,
+ 0x1f040, 0x1f04c,
+ 0x1f240, 0x1f28c,
+ 0x1f2c0, 0x1f2c0,
+ 0x1f2e0, 0x1f2e0,
+ 0x1f300, 0x1f384,
+ 0x1f3c0, 0x1f3c8,
+ 0x1f440, 0x1f44c,
+ 0x1f640, 0x1f68c,
+ 0x1f6c0, 0x1f6c0,
+ 0x1f6e0, 0x1f6e0,
+ 0x1f700, 0x1f784,
+ 0x1f7c0, 0x1f7c8,
+ 0x1f840, 0x1f84c,
+ 0x1fa40, 0x1fa8c,
+ 0x1fac0, 0x1fac0,
+ 0x1fae0, 0x1fae0,
+ 0x1fb00, 0x1fb84,
+ 0x1fbc0, 0x1fbc8,
+ 0x1fc40, 0x1fc4c,
+ 0x1fe40, 0x1fe8c,
+ 0x1fec0, 0x1fec0,
+ 0x1fee0, 0x1fee0,
+ 0x1ff00, 0x1ff84,
+ 0x1ffc0, 0x1ffc8,
+ 0x20000, 0x2002c,
+ 0x20100, 0x2013c,
+ 0x20190, 0x201c8,
+ 0x20200, 0x20318,
+ 0x20400, 0x20528,
+ 0x20540, 0x20614,
+ 0x21000, 0x21040,
+ 0x2104c, 0x21060,
+ 0x210c0, 0x210ec,
+ 0x21200, 0x21268,
+ 0x21270, 0x21284,
+ 0x212fc, 0x21388,
+ 0x21400, 0x21404,
+ 0x21500, 0x21518,
+ 0x2152c, 0x2153c,
+ 0x21550, 0x21554,
+ 0x21600, 0x21600,
+ 0x21608, 0x21628,
+ 0x21630, 0x2163c,
+ 0x21700, 0x2171c,
+ 0x21780, 0x2178c,
+ 0x21800, 0x21c38,
+ 0x21c80, 0x21d7c,
+ 0x21e00, 0x21e04,
+ 0x22000, 0x2202c,
+ 0x22100, 0x2213c,
+ 0x22190, 0x221c8,
+ 0x22200, 0x22318,
+ 0x22400, 0x22528,
+ 0x22540, 0x22614,
+ 0x23000, 0x23040,
+ 0x2304c, 0x23060,
+ 0x230c0, 0x230ec,
+ 0x23200, 0x23268,
+ 0x23270, 0x23284,
+ 0x232fc, 0x23388,
+ 0x23400, 0x23404,
+ 0x23500, 0x23518,
+ 0x2352c, 0x2353c,
+ 0x23550, 0x23554,
+ 0x23600, 0x23600,
+ 0x23608, 0x23628,
+ 0x23630, 0x2363c,
+ 0x23700, 0x2371c,
+ 0x23780, 0x2378c,
+ 0x23800, 0x23c38,
+ 0x23c80, 0x23d7c,
+ 0x23e00, 0x23e04,
+ 0x24000, 0x2402c,
+ 0x24100, 0x2413c,
+ 0x24190, 0x241c8,
+ 0x24200, 0x24318,
+ 0x24400, 0x24528,
+ 0x24540, 0x24614,
+ 0x25000, 0x25040,
+ 0x2504c, 0x25060,
+ 0x250c0, 0x250ec,
+ 0x25200, 0x25268,
+ 0x25270, 0x25284,
+ 0x252fc, 0x25388,
+ 0x25400, 0x25404,
+ 0x25500, 0x25518,
+ 0x2552c, 0x2553c,
+ 0x25550, 0x25554,
+ 0x25600, 0x25600,
+ 0x25608, 0x25628,
+ 0x25630, 0x2563c,
+ 0x25700, 0x2571c,
+ 0x25780, 0x2578c,
+ 0x25800, 0x25c38,
+ 0x25c80, 0x25d7c,
+ 0x25e00, 0x25e04,
+ 0x26000, 0x2602c,
+ 0x26100, 0x2613c,
+ 0x26190, 0x261c8,
+ 0x26200, 0x26318,
+ 0x26400, 0x26528,
+ 0x26540, 0x26614,
+ 0x27000, 0x27040,
+ 0x2704c, 0x27060,
+ 0x270c0, 0x270ec,
+ 0x27200, 0x27268,
+ 0x27270, 0x27284,
+ 0x272fc, 0x27388,
+ 0x27400, 0x27404,
+ 0x27500, 0x27518,
+ 0x2752c, 0x2753c,
+ 0x27550, 0x27554,
+ 0x27600, 0x27600,
+ 0x27608, 0x27628,
+ 0x27630, 0x2763c,
+ 0x27700, 0x2771c,
+ 0x27780, 0x2778c,
+ 0x27800, 0x27c38,
+ 0x27c80, 0x27d7c,
+ 0x27e00, 0x27e04
+ };
+
+ int i;
+ struct adapter *ap = netdev2adap(dev);
+
+ regs->version = mk_adap_vers(ap);
+
+ memset(buf, 0, T4_REGMAP_SIZE);
+ for (i = 0; i < ARRAY_SIZE(reg_ranges); i += 2)
+ reg_block_dump(ap, buf, reg_ranges[i], reg_ranges[i + 1]);
+}
+
+static int restart_autoneg(struct net_device *dev)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return -EAGAIN;
+ if (p->link_cfg.autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ t4_restart_aneg(p->adapter, 0, p->tx_chan);
+ return 0;
+}
+
+static int identify_port(struct net_device *dev, u32 data)
+{
+ if (data == 0)
+ data = 2; /* default to 2 seconds */
+
+ return t4_identify_port(netdev2adap(dev), 0, netdev2pinfo(dev)->viid,
+ data * 5);
+}
+
+static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps)
+{
+ unsigned int v = 0;
+
+ if (type == FW_PORT_TYPE_BT_SGMII || type == FW_PORT_TYPE_BT_XAUI) {
+ v |= SUPPORTED_TP;
+ if (caps & FW_PORT_CAP_SPEED_100M)
+ v |= SUPPORTED_100baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseT_Full;
+ } else if (type == FW_PORT_TYPE_KX4 || type == FW_PORT_TYPE_KX) {
+ v |= SUPPORTED_Backplane;
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseKX_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseKX4_Full;
+ } else if (type == FW_PORT_TYPE_KR)
+ v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full;
+ else if (type == FW_PORT_TYPE_FIBER)
+ v |= SUPPORTED_FIBRE;
+
+ if (caps & FW_PORT_CAP_ANEG)
+ v |= SUPPORTED_Autoneg;
+ return v;
+}
+
+static unsigned int to_fw_linkcaps(unsigned int caps)
+{
+ unsigned int v = 0;
+
+ if (caps & ADVERTISED_100baseT_Full)
+ v |= FW_PORT_CAP_SPEED_100M;
+ if (caps & ADVERTISED_1000baseT_Full)
+ v |= FW_PORT_CAP_SPEED_1G;
+ if (caps & ADVERTISED_10000baseT_Full)
+ v |= FW_PORT_CAP_SPEED_10G;
+ return v;
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ const struct port_info *p = netdev_priv(dev);
+
+ if (p->port_type == FW_PORT_TYPE_BT_SGMII ||
+ p->port_type == FW_PORT_TYPE_BT_XAUI)
+ cmd->port = PORT_TP;
+ else if (p->port_type == FW_PORT_TYPE_FIBER)
+ cmd->port = PORT_FIBRE;
+ else if (p->port_type == FW_PORT_TYPE_TWINAX)
+ cmd->port = PORT_DA;
+ else
+ cmd->port = PORT_OTHER;
+
+ if (p->mdio_addr >= 0) {
+ cmd->phy_address = p->mdio_addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->mdio_support = p->port_type == FW_PORT_TYPE_BT_SGMII ?
+ MDIO_SUPPORTS_C22 : MDIO_SUPPORTS_C45;
+ } else {
+ cmd->phy_address = 0; /* not really, but no better option */
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->mdio_support = 0;
+ }
+
+ cmd->supported = from_fw_linkcaps(p->port_type, p->link_cfg.supported);
+ cmd->advertising = from_fw_linkcaps(p->port_type,
+ p->link_cfg.advertising);
+ cmd->speed = netif_carrier_ok(dev) ? p->link_cfg.speed : 0;
+ cmd->duplex = DUPLEX_FULL;
+ cmd->autoneg = p->link_cfg.autoneg;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
+ return 0;
+}
+
+static unsigned int speed_to_caps(int speed)
+{
+ if (speed == SPEED_100)
+ return FW_PORT_CAP_SPEED_100M;
+ if (speed == SPEED_1000)
+ return FW_PORT_CAP_SPEED_1G;
+ if (speed == SPEED_10000)
+ return FW_PORT_CAP_SPEED_10G;
+ return 0;
+}
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ unsigned int cap;
+ struct port_info *p = netdev_priv(dev);
+ struct link_config *lc = &p->link_cfg;
+
+ if (cmd->duplex != DUPLEX_FULL) /* only full-duplex supported */
+ return -EINVAL;
+
+ if (!(lc->supported & FW_PORT_CAP_ANEG)) {
+ /*
+ * PHY offers a single speed. See if that's what's
+ * being requested.
+ */
+ if (cmd->autoneg == AUTONEG_DISABLE &&
+ (lc->supported & speed_to_caps(cmd->speed)))
+ return 0;
+ return -EINVAL;
+ }
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ cap = speed_to_caps(cmd->speed);
+
+ if (!(lc->supported & cap) || cmd->speed == SPEED_1000 ||
+ cmd->speed == SPEED_10000)
+ return -EINVAL;
+ lc->requested_speed = cap;
+ lc->advertising = 0;
+ } else {
+ cap = to_fw_linkcaps(cmd->advertising);
+ if (!(lc->supported & cap))
+ return -EINVAL;
+ lc->requested_speed = 0;
+ lc->advertising = cap | FW_PORT_CAP_ANEG;
+ }
+ lc->autoneg = cmd->autoneg;
+
+ if (netif_running(dev))
+ return t4_link_start(p->adapter, 0, p->tx_chan, lc);
+ return 0;
+}
+
+static void get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ epause->autoneg = (p->link_cfg.requested_fc & PAUSE_AUTONEG) != 0;
+ epause->rx_pause = (p->link_cfg.fc & PAUSE_RX) != 0;
+ epause->tx_pause = (p->link_cfg.fc & PAUSE_TX) != 0;
+}
+
+static int set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct port_info *p = netdev_priv(dev);
+ struct link_config *lc = &p->link_cfg;
+
+ if (epause->autoneg == AUTONEG_DISABLE)
+ lc->requested_fc = 0;
+ else if (lc->supported & FW_PORT_CAP_ANEG)
+ lc->requested_fc = PAUSE_AUTONEG;
+ else
+ return -EINVAL;
+
+ if (epause->rx_pause)
+ lc->requested_fc |= PAUSE_RX;
+ if (epause->tx_pause)
+ lc->requested_fc |= PAUSE_TX;
+ if (netif_running(dev))
+ return t4_link_start(p->adapter, 0, p->tx_chan, lc);
+ return 0;
+}
+
+static u32 get_rx_csum(struct net_device *dev)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ return p->rx_offload & RX_CSO;
+}
+
+static int set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ if (data)
+ p->rx_offload |= RX_CSO;
+ else
+ p->rx_offload &= ~RX_CSO;
+ return 0;
+}
+
+static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ const struct sge *s = &pi->adapter->sge;
+
+ e->rx_max_pending = MAX_RX_BUFFERS;
+ e->rx_mini_max_pending = MAX_RSPQ_ENTRIES;
+ e->rx_jumbo_max_pending = 0;
+ e->tx_max_pending = MAX_TXQ_ENTRIES;
+
+ e->rx_pending = s->ethrxq[pi->first_qset].fl.size - 8;
+ e->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size;
+ e->rx_jumbo_pending = 0;
+ e->tx_pending = s->ethtxq[pi->first_qset].q.size;
+}
+
+static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ int i;
+ const struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+ struct sge *s = &adapter->sge;
+
+ if (e->rx_pending > MAX_RX_BUFFERS || e->rx_jumbo_pending ||
+ e->tx_pending > MAX_TXQ_ENTRIES ||
+ e->rx_mini_pending > MAX_RSPQ_ENTRIES ||
+ e->rx_mini_pending < MIN_RSPQ_ENTRIES ||
+ e->rx_pending < MIN_FL_ENTRIES || e->tx_pending < MIN_TXQ_ENTRIES)
+ return -EINVAL;
+
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+
+ for (i = 0; i < pi->nqsets; ++i) {
+ s->ethtxq[pi->first_qset + i].q.size = e->tx_pending;
+ s->ethrxq[pi->first_qset + i].fl.size = e->rx_pending + 8;
+ s->ethrxq[pi->first_qset + i].rspq.size = e->rx_mini_pending;
+ }
+ return 0;
+}
+
+static int closest_timer(const struct sge *s, int time)
+{
+ int i, delta, match = 0, min_delta = INT_MAX;
+
+ for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) {
+ delta = time - s->timer_val[i];
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ match = i;
+ }
+ }
+ return match;
+}
+
+static int closest_thres(const struct sge *s, int thres)
+{
+ int i, delta, match = 0, min_delta = INT_MAX;
+
+ for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) {
+ delta = thres - s->counter_val[i];
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ match = i;
+ }
+ }
+ return match;
+}
+
+/*
+ * Return a queue's interrupt hold-off time in us. 0 means no timer.
+ */
+static unsigned int qtimer_val(const struct adapter *adap,
+ const struct sge_rspq *q)
+{
+ unsigned int idx = q->intr_params >> 1;
+
+ return idx < SGE_NTIMERS ? adap->sge.timer_val[idx] : 0;
+}
+
+/**
+ * set_rxq_intr_params - set a queue's interrupt holdoff parameters
+ * @adap: the adapter
+ * @q: the Rx queue
+ * @us: the hold-off time in us, or 0 to disable timer
+ * @cnt: the hold-off packet count, or 0 to disable counter
+ *
+ * Sets an Rx queue's interrupt hold-off time and packet count. At least
+ * one of the two needs to be enabled for the queue to generate interrupts.
+ */
+static int set_rxq_intr_params(struct adapter *adap, struct sge_rspq *q,
+ unsigned int us, unsigned int cnt)
+{
+ if ((us | cnt) == 0)
+ cnt = 1;
+
+ if (cnt) {
+ int err;
+ u32 v, new_idx;
+
+ new_idx = closest_thres(&adap->sge, cnt);
+ if (q->desc && q->pktcnt_idx != new_idx) {
+ /* the queue has already been created, update it */
+ v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) |
+ FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) |
+ FW_PARAMS_PARAM_YZ(q->cntxt_id);
+ err = t4_set_params(adap, 0, 0, 0, 1, &v, &new_idx);
+ if (err)
+ return err;
+ }
+ q->pktcnt_idx = new_idx;
+ }
+
+ us = us == 0 ? 6 : closest_timer(&adap->sge, us);
+ q->intr_params = QINTR_TIMER_IDX(us) | (cnt > 0 ? QINTR_CNT_EN : 0);
+ return 0;
+}
+
+static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+
+ return set_rxq_intr_params(adap, &adap->sge.ethrxq[pi->first_qset].rspq,
+ c->rx_coalesce_usecs, c->rx_max_coalesced_frames);
+}
+
+static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ const struct port_info *pi = netdev_priv(dev);
+ const struct adapter *adap = pi->adapter;
+ const struct sge_rspq *rq = &adap->sge.ethrxq[pi->first_qset].rspq;
+
+ c->rx_coalesce_usecs = qtimer_val(adap, rq);
+ c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN) ?
+ adap->sge.counter_val[rq->pktcnt_idx] : 0;
+ return 0;
+}
+
+/*
+ * Translate a physical EEPROM address to virtual. The first 1K is accessed
+ * through virtual addresses starting at 31K, the rest is accessed through
+ * virtual addresses starting at 0. This mapping is correct only for PF0.
+ */
+static int eeprom_ptov(unsigned int phys_addr)
+{
+ if (phys_addr < 1024)
+ return phys_addr + (31 << 10);
+ if (phys_addr < EEPROMSIZE)
+ return phys_addr - 1024;
+ return -EINVAL;
+}
+
+/*
+ * The next two routines implement eeprom read/write from physical addresses.
+ * The physical->virtual translation is correct only for PF0.
+ */
+static int eeprom_rd_phys(struct adapter *adap, unsigned int phys_addr, u32 *v)
+{
+ int vaddr = eeprom_ptov(phys_addr);
+
+ if (vaddr >= 0)
+ vaddr = pci_read_vpd(adap->pdev, vaddr, sizeof(u32), v);
+ return vaddr < 0 ? vaddr : 0;
+}
+
+static int eeprom_wr_phys(struct adapter *adap, unsigned int phys_addr, u32 v)
+{
+ int vaddr = eeprom_ptov(phys_addr);
+
+ if (vaddr >= 0)
+ vaddr = pci_write_vpd(adap->pdev, vaddr, sizeof(u32), &v);
+ return vaddr < 0 ? vaddr : 0;
+}
+
+#define EEPROM_MAGIC 0x38E2F10C
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
+ u8 *data)
+{
+ int i, err = 0;
+ struct adapter *adapter = netdev2adap(dev);
+
+ u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ e->magic = EEPROM_MAGIC;
+ for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4)
+ err = eeprom_rd_phys(adapter, i, (u32 *)&buf[i]);
+
+ if (!err)
+ memcpy(data, buf + e->offset, e->len);
+ kfree(buf);
+ return err;
+}
+
+static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 *data)
+{
+ u8 *buf;
+ int err = 0;
+ u32 aligned_offset, aligned_len, *p;
+ struct adapter *adapter = netdev2adap(dev);
+
+ if (eeprom->magic != EEPROM_MAGIC)
+ return -EINVAL;
+
+ aligned_offset = eeprom->offset & ~3;
+ aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3;
+
+ if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) {
+ /*
+ * RMW possibly needed for first or last words.
+ */
+ buf = kmalloc(aligned_len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ err = eeprom_rd_phys(adapter, aligned_offset, (u32 *)buf);
+ if (!err && aligned_len > 4)
+ err = eeprom_rd_phys(adapter,
+ aligned_offset + aligned_len - 4,
+ (u32 *)&buf[aligned_len - 4]);
+ if (err)
+ goto out;
+ memcpy(buf + (eeprom->offset & 3), data, eeprom->len);
+ } else
+ buf = data;
+
+ err = t4_seeprom_wp(adapter, false);
+ if (err)
+ goto out;
+
+ for (p = (u32 *)buf; !err && aligned_len; aligned_len -= 4, p++) {
+ err = eeprom_wr_phys(adapter, aligned_offset, *p);
+ aligned_offset += 4;
+ }
+
+ if (!err)
+ err = t4_seeprom_wp(adapter, true);
+out:
+ if (buf != data)
+ kfree(buf);
+ return err;
+}
+
+static int set_flash(struct net_device *netdev, struct ethtool_flash *ef)
+{
+ int ret;
+ const struct firmware *fw;
+ struct adapter *adap = netdev2adap(netdev);
+
+ ef->data[sizeof(ef->data) - 1] = '\0';
+ ret = request_firmware(&fw, ef->data, adap->pdev_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = t4_load_fw(adap, fw->data, fw->size);
+ release_firmware(fw);
+ if (!ret)
+ dev_info(adap->pdev_dev, "loaded firmware %s\n", ef->data);
+ return ret;
+}
+
+#define WOL_SUPPORTED (WAKE_BCAST | WAKE_MAGIC)
+#define BCAST_CRC 0xa0ccc1a6
+
+static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = netdev2adap(dev)->wol;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+static int set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ int err = 0;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (wol->wolopts & ~WOL_SUPPORTED)
+ return -EINVAL;
+ t4_wol_magic_enable(pi->adapter, pi->tx_chan,
+ (wol->wolopts & WAKE_MAGIC) ? dev->dev_addr : NULL);
+ if (wol->wolopts & WAKE_BCAST) {
+ err = t4_wol_pat_enable(pi->adapter, pi->tx_chan, 0xfe, ~0ULL,
+ ~0ULL, 0, false);
+ if (!err)
+ err = t4_wol_pat_enable(pi->adapter, pi->tx_chan, 1,
+ ~6ULL, ~0ULL, BCAST_CRC, true);
+ } else
+ t4_wol_pat_enable(pi->adapter, pi->tx_chan, 0, 0, 0, 0, false);
+ return err;
+}
+
+static int set_tso(struct net_device *dev, u32 value)
+{
+ if (value)
+ dev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+ else
+ dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+ return 0;
+}
+
+static struct ethtool_ops cxgb_ethtool_ops = {
+ .get_settings = get_settings,
+ .set_settings = set_settings,
+ .get_drvinfo = get_drvinfo,
+ .get_msglevel = get_msglevel,
+ .set_msglevel = set_msglevel,
+ .get_ringparam = get_sge_param,
+ .set_ringparam = set_sge_param,
+ .get_coalesce = get_coalesce,
+ .set_coalesce = set_coalesce,
+ .get_eeprom_len = get_eeprom_len,
+ .get_eeprom = get_eeprom,
+ .set_eeprom = set_eeprom,
+ .get_pauseparam = get_pauseparam,
+ .set_pauseparam = set_pauseparam,
+ .get_rx_csum = get_rx_csum,
+ .set_rx_csum = set_rx_csum,
+ .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
+ .set_sg = ethtool_op_set_sg,
+ .get_link = ethtool_op_get_link,
+ .get_strings = get_strings,
+ .phys_id = identify_port,
+ .nway_reset = restart_autoneg,
+ .get_sset_count = get_sset_count,
+ .get_ethtool_stats = get_stats,
+ .get_regs_len = get_regs_len,
+ .get_regs = get_regs,
+ .get_wol = get_wol,
+ .set_wol = set_wol,
+ .set_tso = set_tso,
+ .flash_device = set_flash,
+};
+
+/*
+ * debugfs support
+ */
+
+static int mem_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t mem_read(struct file *file, char __user *buf, size_t count,
+ loff_t *ppos)
+{
+ loff_t pos = *ppos;
+ loff_t avail = file->f_path.dentry->d_inode->i_size;
+ unsigned int mem = (uintptr_t)file->private_data & 3;
+ struct adapter *adap = file->private_data - mem;
+
+ if (pos < 0)
+ return -EINVAL;
+ if (pos >= avail)
+ return 0;
+ if (count > avail - pos)
+ count = avail - pos;
+
+ while (count) {
+ size_t len;
+ int ret, ofst;
+ __be32 data[16];
+
+ if (mem == MEM_MC)
+ ret = t4_mc_read(adap, pos, data, NULL);
+ else
+ ret = t4_edc_read(adap, mem, pos, data, NULL);
+ if (ret)
+ return ret;
+
+ ofst = pos % sizeof(data);
+ len = min(count, sizeof(data) - ofst);
+ if (copy_to_user(buf, (u8 *)data + ofst, len))
+ return -EFAULT;
+
+ buf += len;
+ pos += len;
+ count -= len;
+ }
+ count = pos - *ppos;
+ *ppos = pos;
+ return count;
+}
+
+static const struct file_operations mem_debugfs_fops = {
+ .owner = THIS_MODULE,
+ .open = mem_open,
+ .read = mem_read,
+};
+
+static void __devinit add_debugfs_mem(struct adapter *adap, const char *name,
+ unsigned int idx, unsigned int size_mb)
+{
+ struct dentry *de;
+
+ de = debugfs_create_file(name, S_IRUSR, adap->debugfs_root,
+ (void *)adap + idx, &mem_debugfs_fops);
+ if (de && de->d_inode)
+ de->d_inode->i_size = size_mb << 20;
+}
+
+static int __devinit setup_debugfs(struct adapter *adap)
+{
+ int i;
+
+ if (IS_ERR_OR_NULL(adap->debugfs_root))
+ return -1;
+
+ i = t4_read_reg(adap, MA_TARGET_MEM_ENABLE);
+ if (i & EDRAM0_ENABLE)
+ add_debugfs_mem(adap, "edc0", MEM_EDC0, 5);
+ if (i & EDRAM1_ENABLE)
+ add_debugfs_mem(adap, "edc1", MEM_EDC1, 5);
+ if (i & EXT_MEM_ENABLE)
+ add_debugfs_mem(adap, "mc", MEM_MC,
+ EXT_MEM_SIZE_GET(t4_read_reg(adap, MA_EXT_MEMORY_BAR)));
+ if (adap->l2t)
+ debugfs_create_file("l2t", S_IRUSR, adap->debugfs_root, adap,
+ &t4_l2t_fops);
+ return 0;
+}
+
+/*
+ * upper-layer driver support
+ */
+
+/*
+ * Allocate an active-open TID and set it to the supplied value.
+ */
+int cxgb4_alloc_atid(struct tid_info *t, void *data)
+{
+ int atid = -1;
+
+ spin_lock_bh(&t->atid_lock);
+ if (t->afree) {
+ union aopen_entry *p = t->afree;
+
+ atid = p - t->atid_tab;
+ t->afree = p->next;
+ p->data = data;
+ t->atids_in_use++;
+ }
+ spin_unlock_bh(&t->atid_lock);
+ return atid;
+}
+EXPORT_SYMBOL(cxgb4_alloc_atid);
+
+/*
+ * Release an active-open TID.
+ */
+void cxgb4_free_atid(struct tid_info *t, unsigned int atid)
+{
+ union aopen_entry *p = &t->atid_tab[atid];
+
+ spin_lock_bh(&t->atid_lock);
+ p->next = t->afree;
+ t->afree = p;
+ t->atids_in_use--;
+ spin_unlock_bh(&t->atid_lock);
+}
+EXPORT_SYMBOL(cxgb4_free_atid);
+
+/*
+ * Allocate a server TID and set it to the supplied value.
+ */
+int cxgb4_alloc_stid(struct tid_info *t, int family, void *data)
+{
+ int stid;
+
+ spin_lock_bh(&t->stid_lock);
+ if (family == PF_INET) {
+ stid = find_first_zero_bit(t->stid_bmap, t->nstids);
+ if (stid < t->nstids)
+ __set_bit(stid, t->stid_bmap);
+ else
+ stid = -1;
+ } else {
+ stid = bitmap_find_free_region(t->stid_bmap, t->nstids, 2);
+ if (stid < 0)
+ stid = -1;
+ }
+ if (stid >= 0) {
+ t->stid_tab[stid].data = data;
+ stid += t->stid_base;
+ t->stids_in_use++;
+ }
+ spin_unlock_bh(&t->stid_lock);
+ return stid;
+}
+EXPORT_SYMBOL(cxgb4_alloc_stid);
+
+/*
+ * Release a server TID.
+ */
+void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family)
+{
+ stid -= t->stid_base;
+ spin_lock_bh(&t->stid_lock);
+ if (family == PF_INET)
+ __clear_bit(stid, t->stid_bmap);
+ else
+ bitmap_release_region(t->stid_bmap, stid, 2);
+ t->stid_tab[stid].data = NULL;
+ t->stids_in_use--;
+ spin_unlock_bh(&t->stid_lock);
+}
+EXPORT_SYMBOL(cxgb4_free_stid);
+
+/*
+ * Populate a TID_RELEASE WR. Caller must properly size the skb.
+ */
+static void mk_tid_release(struct sk_buff *skb, unsigned int chan,
+ unsigned int tid)
+{
+ struct cpl_tid_release *req;
+
+ set_wr_txq(skb, CPL_PRIORITY_SETUP, chan);
+ req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, tid);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid));
+}
+
+/*
+ * Queue a TID release request and if necessary schedule a work queue to
+ * process it.
+ */
+void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan,
+ unsigned int tid)
+{
+ void **p = &t->tid_tab[tid];
+ struct adapter *adap = container_of(t, struct adapter, tids);
+
+ spin_lock_bh(&adap->tid_release_lock);
+ *p = adap->tid_release_head;
+ /* Low 2 bits encode the Tx channel number */
+ adap->tid_release_head = (void **)((uintptr_t)p | chan);
+ if (!adap->tid_release_task_busy) {
+ adap->tid_release_task_busy = true;
+ schedule_work(&adap->tid_release_task);
+ }
+ spin_unlock_bh(&adap->tid_release_lock);
+}
+EXPORT_SYMBOL(cxgb4_queue_tid_release);
+
+/*
+ * Process the list of pending TID release requests.
+ */
+static void process_tid_release_list(struct work_struct *work)
+{
+ struct sk_buff *skb;
+ struct adapter *adap;
+
+ adap = container_of(work, struct adapter, tid_release_task);
+
+ spin_lock_bh(&adap->tid_release_lock);
+ while (adap->tid_release_head) {
+ void **p = adap->tid_release_head;
+ unsigned int chan = (uintptr_t)p & 3;
+ p = (void *)p - chan;
+
+ adap->tid_release_head = *p;
+ *p = NULL;
+ spin_unlock_bh(&adap->tid_release_lock);
+
+ while (!(skb = alloc_skb(sizeof(struct cpl_tid_release),
+ GFP_KERNEL)))
+ schedule_timeout_uninterruptible(1);
+
+ mk_tid_release(skb, chan, p - adap->tids.tid_tab);
+ t4_ofld_send(adap, skb);
+ spin_lock_bh(&adap->tid_release_lock);
+ }
+ adap->tid_release_task_busy = false;
+ spin_unlock_bh(&adap->tid_release_lock);
+}
+
+/*
+ * Release a TID and inform HW. If we are unable to allocate the release
+ * message we defer to a work queue.
+ */
+void cxgb4_remove_tid(struct tid_info *t, unsigned int chan, unsigned int tid)
+{
+ void *old;
+ struct sk_buff *skb;
+ struct adapter *adap = container_of(t, struct adapter, tids);
+
+ old = t->tid_tab[tid];
+ skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC);
+ if (likely(skb)) {
+ t->tid_tab[tid] = NULL;
+ mk_tid_release(skb, chan, tid);
+ t4_ofld_send(adap, skb);
+ } else
+ cxgb4_queue_tid_release(t, chan, tid);
+ if (old)
+ atomic_dec(&t->tids_in_use);
+}
+EXPORT_SYMBOL(cxgb4_remove_tid);
+
+/*
+ * Allocate and initialize the TID tables. Returns 0 on success.
+ */
+static int tid_init(struct tid_info *t)
+{
+ size_t size;
+ unsigned int natids = t->natids;
+
+ size = t->ntids * sizeof(*t->tid_tab) + natids * sizeof(*t->atid_tab) +
+ t->nstids * sizeof(*t->stid_tab) +
+ BITS_TO_LONGS(t->nstids) * sizeof(long);
+ t->tid_tab = t4_alloc_mem(size);
+ if (!t->tid_tab)
+ return -ENOMEM;
+
+ t->atid_tab = (union aopen_entry *)&t->tid_tab[t->ntids];
+ t->stid_tab = (struct serv_entry *)&t->atid_tab[natids];
+ t->stid_bmap = (unsigned long *)&t->stid_tab[t->nstids];
+ spin_lock_init(&t->stid_lock);
+ spin_lock_init(&t->atid_lock);
+
+ t->stids_in_use = 0;
+ t->afree = NULL;
+ t->atids_in_use = 0;
+ atomic_set(&t->tids_in_use, 0);
+
+ /* Setup the free list for atid_tab and clear the stid bitmap. */
+ if (natids) {
+ while (--natids)
+ t->atid_tab[natids - 1].next = &t->atid_tab[natids];
+ t->afree = t->atid_tab;
+ }
+ bitmap_zero(t->stid_bmap, t->nstids);
+ return 0;
+}
+
+/**
+ * cxgb4_create_server - create an IP server
+ * @dev: the device
+ * @stid: the server TID
+ * @sip: local IP address to bind server to
+ * @sport: the server's TCP port
+ * @queue: queue to direct messages from this server to
+ *
+ * Create an IP server for the given port and address.
+ * Returns <0 on error and one of the %NET_XMIT_* values on success.
+ */
+int cxgb4_create_server(const struct net_device *dev, unsigned int stid,
+ __be32 sip, __be16 sport, unsigned int queue)
+{
+ unsigned int chan;
+ struct sk_buff *skb;
+ struct adapter *adap;
+ struct cpl_pass_open_req *req;
+
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ adap = netdev2adap(dev);
+ req = (struct cpl_pass_open_req *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, 0);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ, stid));
+ req->local_port = sport;
+ req->peer_port = htons(0);
+ req->local_ip = sip;
+ req->peer_ip = htonl(0);
+ chan = netdev2pinfo(adap->sge.ingr_map[queue]->netdev)->tx_chan;
+ req->opt0 = cpu_to_be64(TX_CHAN(chan));
+ req->opt1 = cpu_to_be64(CONN_POLICY_ASK |
+ SYN_RSS_ENABLE | SYN_RSS_QUEUE(queue));
+ return t4_mgmt_tx(adap, skb);
+}
+EXPORT_SYMBOL(cxgb4_create_server);
+
+/**
+ * cxgb4_create_server6 - create an IPv6 server
+ * @dev: the device
+ * @stid: the server TID
+ * @sip: local IPv6 address to bind server to
+ * @sport: the server's TCP port
+ * @queue: queue to direct messages from this server to
+ *
+ * Create an IPv6 server for the given port and address.
+ * Returns <0 on error and one of the %NET_XMIT_* values on success.
+ */
+int cxgb4_create_server6(const struct net_device *dev, unsigned int stid,
+ const struct in6_addr *sip, __be16 sport,
+ unsigned int queue)
+{
+ unsigned int chan;
+ struct sk_buff *skb;
+ struct adapter *adap;
+ struct cpl_pass_open_req6 *req;
+
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+
+ adap = netdev2adap(dev);
+ req = (struct cpl_pass_open_req6 *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, 0);
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_OPEN_REQ6, stid));
+ req->local_port = sport;
+ req->peer_port = htons(0);
+ req->local_ip_hi = *(__be64 *)(sip->s6_addr);
+ req->local_ip_lo = *(__be64 *)(sip->s6_addr + 8);
+ req->peer_ip_hi = cpu_to_be64(0);
+ req->peer_ip_lo = cpu_to_be64(0);
+ chan = netdev2pinfo(adap->sge.ingr_map[queue]->netdev)->tx_chan;
+ req->opt0 = cpu_to_be64(TX_CHAN(chan));
+ req->opt1 = cpu_to_be64(CONN_POLICY_ASK |
+ SYN_RSS_ENABLE | SYN_RSS_QUEUE(queue));
+ return t4_mgmt_tx(adap, skb);
+}
+EXPORT_SYMBOL(cxgb4_create_server6);
+
+/**
+ * cxgb4_best_mtu - find the entry in the MTU table closest to an MTU
+ * @mtus: the HW MTU table
+ * @mtu: the target MTU
+ * @idx: index of selected entry in the MTU table
+ *
+ * Returns the index and the value in the HW MTU table that is closest to
+ * but does not exceed @mtu, unless @mtu is smaller than any value in the
+ * table, in which case that smallest available value is selected.
+ */
+unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu,
+ unsigned int *idx)
+{
+ unsigned int i = 0;
+
+ while (i < NMTUS - 1 && mtus[i + 1] <= mtu)
+ ++i;
+ if (idx)
+ *idx = i;
+ return mtus[i];
+}
+EXPORT_SYMBOL(cxgb4_best_mtu);
+
+/**
+ * cxgb4_port_chan - get the HW channel of a port
+ * @dev: the net device for the port
+ *
+ * Return the HW Tx channel of the given port.
+ */
+unsigned int cxgb4_port_chan(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->tx_chan;
+}
+EXPORT_SYMBOL(cxgb4_port_chan);
+
+/**
+ * cxgb4_port_viid - get the VI id of a port
+ * @dev: the net device for the port
+ *
+ * Return the VI id of the given port.
+ */
+unsigned int cxgb4_port_viid(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->viid;
+}
+EXPORT_SYMBOL(cxgb4_port_viid);
+
+/**
+ * cxgb4_port_idx - get the index of a port
+ * @dev: the net device for the port
+ *
+ * Return the index of the given port.
+ */
+unsigned int cxgb4_port_idx(const struct net_device *dev)
+{
+ return netdev2pinfo(dev)->port_id;
+}
+EXPORT_SYMBOL(cxgb4_port_idx);
+
+/**
+ * cxgb4_netdev_by_hwid - return the net device of a HW port
+ * @pdev: identifies the adapter
+ * @id: the HW port id
+ *
+ * Return the net device associated with the interface with the given HW
+ * id.
+ */
+struct net_device *cxgb4_netdev_by_hwid(struct pci_dev *pdev, unsigned int id)
+{
+ const struct adapter *adap = pci_get_drvdata(pdev);
+
+ if (!adap || id >= NCHAN)
+ return NULL;
+ id = adap->chan_map[id];
+ return id < MAX_NPORTS ? adap->port[id] : NULL;
+}
+EXPORT_SYMBOL(cxgb4_netdev_by_hwid);
+
+void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4,
+ struct tp_tcp_stats *v6)
+{
+ struct adapter *adap = pci_get_drvdata(pdev);
+
+ spin_lock(&adap->stats_lock);
+ t4_tp_get_tcp_stats(adap, v4, v6);
+ spin_unlock(&adap->stats_lock);
+}
+EXPORT_SYMBOL(cxgb4_get_tcp_stats);
+
+void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask,
+ const unsigned int *pgsz_order)
+{
+ struct adapter *adap = netdev2adap(dev);
+
+ t4_write_reg(adap, ULP_RX_ISCSI_TAGMASK, tag_mask);
+ t4_write_reg(adap, ULP_RX_ISCSI_PSZ, HPZ0(pgsz_order[0]) |
+ HPZ1(pgsz_order[1]) | HPZ2(pgsz_order[2]) |
+ HPZ3(pgsz_order[3]));
+}
+EXPORT_SYMBOL(cxgb4_iscsi_init);
+
+static struct pci_driver cxgb4_driver;
+
+static void check_neigh_update(struct neighbour *neigh)
+{
+ const struct device *parent;
+ const struct net_device *netdev = neigh->dev;
+
+ if (netdev->priv_flags & IFF_802_1Q_VLAN)
+ netdev = vlan_dev_real_dev(netdev);
+ parent = netdev->dev.parent;
+ if (parent && parent->driver == &cxgb4_driver.driver)
+ t4_l2t_update(dev_get_drvdata(parent), neigh);
+}
+
+static int netevent_cb(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ switch (event) {
+ case NETEVENT_NEIGH_UPDATE:
+ check_neigh_update(data);
+ break;
+ case NETEVENT_PMTU_UPDATE:
+ case NETEVENT_REDIRECT:
+ default:
+ break;
+ }
+ return 0;
+}
+
+static bool netevent_registered;
+static struct notifier_block cxgb4_netevent_nb = {
+ .notifier_call = netevent_cb
+};
+
+static void uld_attach(struct adapter *adap, unsigned int uld)
+{
+ void *handle;
+ struct cxgb4_lld_info lli;
+
+ lli.pdev = adap->pdev;
+ lli.l2t = adap->l2t;
+ lli.tids = &adap->tids;
+ lli.ports = adap->port;
+ lli.vr = &adap->vres;
+ lli.mtus = adap->params.mtus;
+ if (uld == CXGB4_ULD_RDMA) {
+ lli.rxq_ids = adap->sge.rdma_rxq;
+ lli.nrxq = adap->sge.rdmaqs;
+ } else if (uld == CXGB4_ULD_ISCSI) {
+ lli.rxq_ids = adap->sge.ofld_rxq;
+ lli.nrxq = adap->sge.ofldqsets;
+ }
+ lli.ntxq = adap->sge.ofldqsets;
+ lli.nchan = adap->params.nports;
+ lli.nports = adap->params.nports;
+ lli.wr_cred = adap->params.ofldq_wr_cred;
+ lli.adapter_type = adap->params.rev;
+ lli.iscsi_iolen = MAXRXDATA_GET(t4_read_reg(adap, TP_PARA_REG2));
+ lli.udb_density = 1 << QUEUESPERPAGEPF0_GET(
+ t4_read_reg(adap, SGE_EGRESS_QUEUES_PER_PAGE_PF));
+ lli.ucq_density = 1 << QUEUESPERPAGEPF0_GET(
+ t4_read_reg(adap, SGE_INGRESS_QUEUES_PER_PAGE_PF));
+ lli.gts_reg = adap->regs + MYPF_REG(SGE_PF_GTS);
+ lli.db_reg = adap->regs + MYPF_REG(SGE_PF_KDOORBELL);
+ lli.fw_vers = adap->params.fw_vers;
+
+ handle = ulds[uld].add(&lli);
+ if (IS_ERR(handle)) {
+ dev_warn(adap->pdev_dev,
+ "could not attach to the %s driver, error %ld\n",
+ uld_str[uld], PTR_ERR(handle));
+ return;
+ }
+
+ adap->uld_handle[uld] = handle;
+
+ if (!netevent_registered) {
+ register_netevent_notifier(&cxgb4_netevent_nb);
+ netevent_registered = true;
+ }
+}
+
+static void attach_ulds(struct adapter *adap)
+{
+ unsigned int i;
+
+ mutex_lock(&uld_mutex);
+ list_add_tail(&adap->list_node, &adapter_list);
+ for (i = 0; i < CXGB4_ULD_MAX; i++)
+ if (ulds[i].add)
+ uld_attach(adap, i);
+ mutex_unlock(&uld_mutex);
+}
+
+static void detach_ulds(struct adapter *adap)
+{
+ unsigned int i;
+
+ mutex_lock(&uld_mutex);
+ list_del(&adap->list_node);
+ for (i = 0; i < CXGB4_ULD_MAX; i++)
+ if (adap->uld_handle[i]) {
+ ulds[i].state_change(adap->uld_handle[i],
+ CXGB4_STATE_DETACH);
+ adap->uld_handle[i] = NULL;
+ }
+ if (netevent_registered && list_empty(&adapter_list)) {
+ unregister_netevent_notifier(&cxgb4_netevent_nb);
+ netevent_registered = false;
+ }
+ mutex_unlock(&uld_mutex);
+}
+
+static void notify_ulds(struct adapter *adap, enum cxgb4_state new_state)
+{
+ unsigned int i;
+
+ mutex_lock(&uld_mutex);
+ for (i = 0; i < CXGB4_ULD_MAX; i++)
+ if (adap->uld_handle[i])
+ ulds[i].state_change(adap->uld_handle[i], new_state);
+ mutex_unlock(&uld_mutex);
+}
+
+/**
+ * cxgb4_register_uld - register an upper-layer driver
+ * @type: the ULD type
+ * @p: the ULD methods
+ *
+ * Registers an upper-layer driver with this driver and notifies the ULD
+ * about any presently available devices that support its type. Returns
+ * %-EBUSY if a ULD of the same type is already registered.
+ */
+int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p)
+{
+ int ret = 0;
+ struct adapter *adap;
+
+ if (type >= CXGB4_ULD_MAX)
+ return -EINVAL;
+ mutex_lock(&uld_mutex);
+ if (ulds[type].add) {
+ ret = -EBUSY;
+ goto out;
+ }
+ ulds[type] = *p;
+ list_for_each_entry(adap, &adapter_list, list_node)
+ uld_attach(adap, type);
+out: mutex_unlock(&uld_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(cxgb4_register_uld);
+
+/**
+ * cxgb4_unregister_uld - unregister an upper-layer driver
+ * @type: the ULD type
+ *
+ * Unregisters an existing upper-layer driver.
+ */
+int cxgb4_unregister_uld(enum cxgb4_uld type)
+{
+ struct adapter *adap;
+
+ if (type >= CXGB4_ULD_MAX)
+ return -EINVAL;
+ mutex_lock(&uld_mutex);
+ list_for_each_entry(adap, &adapter_list, list_node)
+ adap->uld_handle[type] = NULL;
+ ulds[type].add = NULL;
+ mutex_unlock(&uld_mutex);
+ return 0;
+}
+EXPORT_SYMBOL(cxgb4_unregister_uld);
+
+/**
+ * cxgb_up - enable the adapter
+ * @adap: adapter being enabled
+ *
+ * Called when the first port is enabled, this function performs the
+ * actions necessary to make an adapter operational, such as completing
+ * the initialization of HW modules, and enabling interrupts.
+ *
+ * Must be called with the rtnl lock held.
+ */
+static int cxgb_up(struct adapter *adap)
+{
+ int err = 0;
+
+ if (!(adap->flags & FULL_INIT_DONE)) {
+ err = setup_sge_queues(adap);
+ if (err)
+ goto out;
+ err = setup_rss(adap);
+ if (err) {
+ t4_free_sge_resources(adap);
+ goto out;
+ }
+ if (adap->flags & USING_MSIX)
+ name_msix_vecs(adap);
+ adap->flags |= FULL_INIT_DONE;
+ }
+
+ if (adap->flags & USING_MSIX) {
+ err = request_irq(adap->msix_info[0].vec, t4_nondata_intr, 0,
+ adap->msix_info[0].desc, adap);
+ if (err)
+ goto irq_err;
+
+ err = request_msix_queue_irqs(adap);
+ if (err) {
+ free_irq(adap->msix_info[0].vec, adap);
+ goto irq_err;
+ }
+ } else {
+ err = request_irq(adap->pdev->irq, t4_intr_handler(adap),
+ (adap->flags & USING_MSI) ? 0 : IRQF_SHARED,
+ adap->name, adap);
+ if (err)
+ goto irq_err;
+ }
+ enable_rx(adap);
+ t4_sge_start(adap);
+ t4_intr_enable(adap);
+ notify_ulds(adap, CXGB4_STATE_UP);
+ out:
+ return err;
+ irq_err:
+ dev_err(adap->pdev_dev, "request_irq failed, err %d\n", err);
+ goto out;
+}
+
+static void cxgb_down(struct adapter *adapter)
+{
+ t4_intr_disable(adapter);
+ cancel_work_sync(&adapter->tid_release_task);
+ adapter->tid_release_task_busy = false;
+
+ if (adapter->flags & USING_MSIX) {
+ free_msix_queue_irqs(adapter);
+ free_irq(adapter->msix_info[0].vec, adapter);
+ } else
+ free_irq(adapter->pdev->irq, adapter);
+ quiesce_rx(adapter);
+}
+
+/*
+ * net_device operations
+ */
+static int cxgb_open(struct net_device *dev)
+{
+ int err;
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
+ return err;
+
+ dev->real_num_tx_queues = pi->nqsets;
+ set_bit(pi->tx_chan, &adapter->open_device_map);
+ link_start(dev);
+ netif_tx_start_all_queues(dev);
+ return 0;
+}
+
+static int cxgb_close(struct net_device *dev)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adapter = pi->adapter;
+
+ netif_tx_stop_all_queues(dev);
+ netif_carrier_off(dev);
+ ret = t4_enable_vi(adapter, 0, pi->viid, false, false);
+
+ clear_bit(pi->tx_chan, &adapter->open_device_map);
+
+ if (!adapter->open_device_map)
+ cxgb_down(adapter);
+ return 0;
+}
+
+static struct net_device_stats *cxgb_get_stats(struct net_device *dev)
+{
+ struct port_stats stats;
+ struct port_info *p = netdev_priv(dev);
+ struct adapter *adapter = p->adapter;
+ struct net_device_stats *ns = &dev->stats;
+
+ spin_lock(&adapter->stats_lock);
+ t4_get_port_stats(adapter, p->tx_chan, &stats);
+ spin_unlock(&adapter->stats_lock);
+
+ ns->tx_bytes = stats.tx_octets;
+ ns->tx_packets = stats.tx_frames;
+ ns->rx_bytes = stats.rx_octets;
+ ns->rx_packets = stats.rx_frames;
+ ns->multicast = stats.rx_mcast_frames;
+
+ /* detailed rx_errors */
+ ns->rx_length_errors = stats.rx_jabber + stats.rx_too_long +
+ stats.rx_runt;
+ ns->rx_over_errors = 0;
+ ns->rx_crc_errors = stats.rx_fcs_err;
+ ns->rx_frame_errors = stats.rx_symbol_err;
+ ns->rx_fifo_errors = stats.rx_ovflow0 + stats.rx_ovflow1 +
+ stats.rx_ovflow2 + stats.rx_ovflow3 +
+ stats.rx_trunc0 + stats.rx_trunc1 +
+ stats.rx_trunc2 + stats.rx_trunc3;
+ ns->rx_missed_errors = 0;
+
+ /* detailed tx_errors */
+ ns->tx_aborted_errors = 0;
+ ns->tx_carrier_errors = 0;
+ ns->tx_fifo_errors = 0;
+ ns->tx_heartbeat_errors = 0;
+ ns->tx_window_errors = 0;
+
+ ns->tx_errors = stats.tx_error_frames;
+ ns->rx_errors = stats.rx_symbol_err + stats.rx_fcs_err +
+ ns->rx_length_errors + stats.rx_len_err + ns->rx_fifo_errors;
+ return ns;
+}
+
+static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ int ret = 0, prtad, devad;
+ struct port_info *pi = netdev_priv(dev);
+ struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ if (pi->mdio_addr < 0)
+ return -EOPNOTSUPP;
+ data->phy_id = pi->mdio_addr;
+ break;
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (mdio_phy_id_is_c45(data->phy_id)) {
+ prtad = mdio_phy_id_prtad(data->phy_id);
+ devad = mdio_phy_id_devad(data->phy_id);
+ } else if (data->phy_id < 32) {
+ prtad = data->phy_id;
+ devad = 0;
+ data->reg_num &= 0x1f;
+ } else
+ return -EINVAL;
+
+ if (cmd == SIOCGMIIREG)
+ ret = t4_mdio_rd(pi->adapter, 0, prtad, devad,
+ data->reg_num, &data->val_out);
+ else
+ ret = t4_mdio_wr(pi->adapter, 0, prtad, devad,
+ data->reg_num, data->val_in);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static void cxgb_set_rxmode(struct net_device *dev)
+{
+ /* unfortunately we can't return errors to the stack */
+ set_rxmode(dev, -1, false);
+}
+
+static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (new_mtu < 81 || new_mtu > MAX_MTU) /* accommodate SACK */
+ return -EINVAL;
+ ret = t4_set_rxmode(pi->adapter, 0, pi->viid, new_mtu, -1, -1, -1,
+ true);
+ if (!ret)
+ dev->mtu = new_mtu;
+ return ret;
+}
+
+static int cxgb_set_mac_addr(struct net_device *dev, void *p)
+{
+ int ret;
+ struct sockaddr *addr = p;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ ret = t4_change_mac(pi->adapter, 0, pi->viid, pi->xact_addr_filt,
+ addr->sa_data, true, true);
+ if (ret < 0)
+ return ret;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ pi->xact_addr_filt = ret;
+ return 0;
+}
+
+static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct port_info *pi = netdev_priv(dev);
+
+ pi->vlan_grp = grp;
+ t4_set_vlan_accel(pi->adapter, 1 << pi->tx_chan, grp != NULL);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void cxgb_netpoll(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+
+ if (adap->flags & USING_MSIX) {
+ int i;
+ struct sge_eth_rxq *rx = &adap->sge.ethrxq[pi->first_qset];
+
+ for (i = pi->nqsets; i; i--, rx++)
+ t4_sge_intr_msix(0, &rx->rspq);
+ } else
+ t4_intr_handler(adap)(0, adap);
+}
+#endif
+
+static const struct net_device_ops cxgb4_netdev_ops = {
+ .ndo_open = cxgb_open,
+ .ndo_stop = cxgb_close,
+ .ndo_start_xmit = t4_eth_xmit,
+ .ndo_get_stats = cxgb_get_stats,
+ .ndo_set_rx_mode = cxgb_set_rxmode,
+ .ndo_set_mac_address = cxgb_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = cxgb_ioctl,
+ .ndo_change_mtu = cxgb_change_mtu,
+ .ndo_vlan_rx_register = vlan_rx_register,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = cxgb_netpoll,
+#endif
+};
+
+void t4_fatal_err(struct adapter *adap)
+{
+ t4_set_reg_field(adap, SGE_CONTROL, GLOBALENABLE, 0);
+ t4_intr_disable(adap);
+ dev_alert(adap->pdev_dev, "encountered fatal error, adapter stopped\n");
+}
+
+static void setup_memwin(struct adapter *adap)
+{
+ u32 bar0;
+
+ bar0 = pci_resource_start(adap->pdev, 0); /* truncation intentional */
+ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 0),
+ (bar0 + MEMWIN0_BASE) | BIR(0) |
+ WINDOW(ilog2(MEMWIN0_APERTURE) - 10));
+ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 1),
+ (bar0 + MEMWIN1_BASE) | BIR(0) |
+ WINDOW(ilog2(MEMWIN1_APERTURE) - 10));
+ t4_write_reg(adap, PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN, 2),
+ (bar0 + MEMWIN2_BASE) | BIR(0) |
+ WINDOW(ilog2(MEMWIN2_APERTURE) - 10));
+}
+
+/*
+ * Max # of ATIDs. The absolute HW max is 16K but we keep it lower.
+ */
+#define MAX_ATIDS 8192U
+
+/*
+ * Phase 0 of initialization: contact FW, obtain config, perform basic init.
+ */
+static int adap_init0(struct adapter *adap)
+{
+ int ret;
+ u32 v, port_vec;
+ enum dev_state state;
+ u32 params[7], val[7];
+ struct fw_caps_config_cmd c;
+
+ ret = t4_check_fw_version(adap);
+ if (ret == -EINVAL || ret > 0) {
+ if (upgrade_fw(adap) >= 0) /* recache FW version */
+ ret = t4_check_fw_version(adap);
+ }
+ if (ret < 0)
+ return ret;
+
+ /* contact FW, request master */
+ ret = t4_fw_hello(adap, 0, 0, MASTER_MUST, &state);
+ if (ret < 0) {
+ dev_err(adap->pdev_dev, "could not connect to FW, error %d\n",
+ ret);
+ return ret;
+ }
+
+ /* reset device */
+ ret = t4_fw_reset(adap, 0, PIORSTMODE | PIORST);
+ if (ret < 0)
+ goto bye;
+
+ /* get device capabilities */
+ memset(&c, 0, sizeof(c));
+ c.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST | FW_CMD_READ);
+ c.retval_len16 = htonl(FW_LEN16(c));
+ ret = t4_wr_mbox(adap, 0, &c, sizeof(c), &c);
+ if (ret < 0)
+ goto bye;
+
+ /* select capabilities we'll be using */
+ if (c.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
+ if (!vf_acls)
+ c.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
+ else
+ c.niccaps = htons(FW_CAPS_CONFIG_NIC_VM);
+ } else if (vf_acls) {
+ dev_err(adap->pdev_dev, "virtualization ACLs not supported");
+ goto bye;
+ }
+ c.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ FW_CMD_REQUEST | FW_CMD_WRITE);
+ ret = t4_wr_mbox(adap, 0, &c, sizeof(c), NULL);
+ if (ret < 0)
+ goto bye;
+
+ ret = t4_config_glbl_rss(adap, 0,
+ FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL,
+ FW_RSS_GLB_CONFIG_CMD_TNLMAPEN |
+ FW_RSS_GLB_CONFIG_CMD_TNLALLLKP);
+ if (ret < 0)
+ goto bye;
+
+ ret = t4_cfg_pfvf(adap, 0, 0, 0, 64, 64, 64, 0, 0, 4, 0xf, 0xf, 16,
+ FW_CMD_CAP_PF, FW_CMD_CAP_PF);
+ if (ret < 0)
+ goto bye;
+
+ for (v = 0; v < SGE_NTIMERS - 1; v++)
+ adap->sge.timer_val[v] = min(intr_holdoff[v], MAX_SGE_TIMERVAL);
+ adap->sge.timer_val[SGE_NTIMERS - 1] = MAX_SGE_TIMERVAL;
+ adap->sge.counter_val[0] = 1;
+ for (v = 1; v < SGE_NCOUNTERS; v++)
+ adap->sge.counter_val[v] = min(intr_cnt[v - 1],
+ THRESHOLD_3_MASK);
+ t4_sge_init(adap);
+
+ /* get basic stuff going */
+ ret = t4_early_init(adap, 0);
+ if (ret < 0)
+ goto bye;
+
+#define FW_PARAM_DEV(param) \
+ (FW_PARAMS_MNEM(FW_PARAMS_MNEM_DEV) | \
+ FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_DEV_##param))
+
+#define FW_PARAM_PFVF(param) \
+ (FW_PARAMS_MNEM(FW_PARAMS_MNEM_PFVF) | \
+ FW_PARAMS_PARAM_X(FW_PARAMS_PARAM_PFVF_##param))
+
+ params[0] = FW_PARAM_DEV(PORTVEC);
+ params[1] = FW_PARAM_PFVF(L2T_START);
+ params[2] = FW_PARAM_PFVF(L2T_END);
+ params[3] = FW_PARAM_PFVF(FILTER_START);
+ params[4] = FW_PARAM_PFVF(FILTER_END);
+ ret = t4_query_params(adap, 0, 0, 0, 5, params, val);
+ if (ret < 0)
+ goto bye;
+ port_vec = val[0];
+ adap->tids.ftid_base = val[3];
+ adap->tids.nftids = val[4] - val[3] + 1;
+
+ if (c.ofldcaps) {
+ /* query offload-related parameters */
+ params[0] = FW_PARAM_DEV(NTID);
+ params[1] = FW_PARAM_PFVF(SERVER_START);
+ params[2] = FW_PARAM_PFVF(SERVER_END);
+ params[3] = FW_PARAM_PFVF(TDDP_START);
+ params[4] = FW_PARAM_PFVF(TDDP_END);
+ params[5] = FW_PARAM_DEV(FLOWC_BUFFIFO_SZ);
+ ret = t4_query_params(adap, 0, 0, 0, 6, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->tids.ntids = val[0];
+ adap->tids.natids = min(adap->tids.ntids / 2, MAX_ATIDS);
+ adap->tids.stid_base = val[1];
+ adap->tids.nstids = val[2] - val[1] + 1;
+ adap->vres.ddp.start = val[3];
+ adap->vres.ddp.size = val[4] - val[3] + 1;
+ adap->params.ofldq_wr_cred = val[5];
+ adap->params.offload = 1;
+ }
+ if (c.rdmacaps) {
+ params[0] = FW_PARAM_PFVF(STAG_START);
+ params[1] = FW_PARAM_PFVF(STAG_END);
+ params[2] = FW_PARAM_PFVF(RQ_START);
+ params[3] = FW_PARAM_PFVF(RQ_END);
+ params[4] = FW_PARAM_PFVF(PBL_START);
+ params[5] = FW_PARAM_PFVF(PBL_END);
+ ret = t4_query_params(adap, 0, 0, 0, 6, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->vres.stag.start = val[0];
+ adap->vres.stag.size = val[1] - val[0] + 1;
+ adap->vres.rq.start = val[2];
+ adap->vres.rq.size = val[3] - val[2] + 1;
+ adap->vres.pbl.start = val[4];
+ adap->vres.pbl.size = val[5] - val[4] + 1;
+ }
+ if (c.iscsicaps) {
+ params[0] = FW_PARAM_PFVF(ISCSI_START);
+ params[1] = FW_PARAM_PFVF(ISCSI_END);
+ ret = t4_query_params(adap, 0, 0, 0, 2, params, val);
+ if (ret < 0)
+ goto bye;
+ adap->vres.iscsi.start = val[0];
+ adap->vres.iscsi.size = val[1] - val[0] + 1;
+ }
+#undef FW_PARAM_PFVF
+#undef FW_PARAM_DEV
+
+ adap->params.nports = hweight32(port_vec);
+ adap->params.portvec = port_vec;
+ adap->flags |= FW_OK;
+
+ /* These are finalized by FW initialization, load their values now */
+ v = t4_read_reg(adap, TP_TIMER_RESOLUTION);
+ adap->params.tp.tre = TIMERRESOLUTION_GET(v);
+ t4_read_mtu_tbl(adap, adap->params.mtus, NULL);
+ t4_load_mtus(adap, adap->params.mtus, adap->params.a_wnd,
+ adap->params.b_wnd);
+
+ /* tweak some settings */
+ t4_write_reg(adap, TP_SHIFT_CNT, 0x64f8849);
+ t4_write_reg(adap, ULP_RX_TDDP_PSZ, HPZ0(PAGE_SHIFT - 12));
+ t4_write_reg(adap, TP_PIO_ADDR, TP_INGRESS_CONFIG);
+ v = t4_read_reg(adap, TP_PIO_DATA);
+ t4_write_reg(adap, TP_PIO_DATA, v & ~CSUM_HAS_PSEUDO_HDR);
+ setup_memwin(adap);
+ return 0;
+
+ /*
+ * If a command timed out or failed with EIO FW does not operate within
+ * its spec or something catastrophic happened to HW/FW, stop issuing
+ * commands.
+ */
+bye: if (ret != -ETIMEDOUT && ret != -EIO)
+ t4_fw_bye(adap, 0);
+ return ret;
+}
+
+static inline bool is_10g_port(const struct link_config *lc)
+{
+ return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0;
+}
+
+static inline void init_rspq(struct sge_rspq *q, u8 timer_idx, u8 pkt_cnt_idx,
+ unsigned int size, unsigned int iqe_size)
+{
+ q->intr_params = QINTR_TIMER_IDX(timer_idx) |
+ (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0);
+ q->pktcnt_idx = pkt_cnt_idx < SGE_NCOUNTERS ? pkt_cnt_idx : 0;
+ q->iqe_len = iqe_size;
+ q->size = size;
+}
+
+/*
+ * Perform default configuration of DMA queues depending on the number and type
+ * of ports we found and the number of available CPUs. Most settings can be
+ * modified by the admin prior to actual use.
+ */
+static void __devinit cfg_queues(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+ int i, q10g = 0, n10g = 0, qidx = 0;
+
+ for_each_port(adap, i)
+ n10g += is_10g_port(&adap2pinfo(adap, i)->link_cfg);
+
+ /*
+ * We default to 1 queue per non-10G port and up to # of cores queues
+ * per 10G port.
+ */
+ if (n10g)
+ q10g = (MAX_ETH_QSETS - (adap->params.nports - n10g)) / n10g;
+ if (q10g > num_online_cpus())
+ q10g = num_online_cpus();
+
+ for_each_port(adap, i) {
+ struct port_info *pi = adap2pinfo(adap, i);
+
+ pi->first_qset = qidx;
+ pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1;
+ qidx += pi->nqsets;
+ }
+
+ s->ethqsets = qidx;
+ s->max_ethqsets = qidx; /* MSI-X may lower it later */
+
+ if (is_offload(adap)) {
+ /*
+ * For offload we use 1 queue/channel if all ports are up to 1G,
+ * otherwise we divide all available queues amongst the channels
+ * capped by the number of available cores.
+ */
+ if (n10g) {
+ i = min_t(int, ARRAY_SIZE(s->ofldrxq),
+ num_online_cpus());
+ s->ofldqsets = roundup(i, adap->params.nports);
+ } else
+ s->ofldqsets = adap->params.nports;
+ /* For RDMA one Rx queue per channel suffices */
+ s->rdmaqs = adap->params.nports;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->ethrxq); i++) {
+ struct sge_eth_rxq *r = &s->ethrxq[i];
+
+ init_rspq(&r->rspq, 0, 0, 1024, 64);
+ r->fl.size = 72;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->ethtxq); i++)
+ s->ethtxq[i].q.size = 1024;
+
+ for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++)
+ s->ctrlq[i].q.size = 512;
+
+ for (i = 0; i < ARRAY_SIZE(s->ofldtxq); i++)
+ s->ofldtxq[i].q.size = 1024;
+
+ for (i = 0; i < ARRAY_SIZE(s->ofldrxq); i++) {
+ struct sge_ofld_rxq *r = &s->ofldrxq[i];
+
+ init_rspq(&r->rspq, 0, 0, 1024, 64);
+ r->rspq.uld = CXGB4_ULD_ISCSI;
+ r->fl.size = 72;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(s->rdmarxq); i++) {
+ struct sge_ofld_rxq *r = &s->rdmarxq[i];
+
+ init_rspq(&r->rspq, 0, 0, 511, 64);
+ r->rspq.uld = CXGB4_ULD_RDMA;
+ r->fl.size = 72;
+ }
+
+ init_rspq(&s->fw_evtq, 6, 0, 512, 64);
+ init_rspq(&s->intrq, 6, 0, 2 * MAX_INGQ, 64);
+}
+
+/*
+ * Reduce the number of Ethernet queues across all ports to at most n.
+ * n provides at least one queue per port.
+ */
+static void __devinit reduce_ethqs(struct adapter *adap, int n)
+{
+ int i;
+ struct port_info *pi;
+
+ while (n < adap->sge.ethqsets)
+ for_each_port(adap, i) {
+ pi = adap2pinfo(adap, i);
+ if (pi->nqsets > 1) {
+ pi->nqsets--;
+ adap->sge.ethqsets--;
+ if (adap->sge.ethqsets <= n)
+ break;
+ }
+ }
+
+ n = 0;
+ for_each_port(adap, i) {
+ pi = adap2pinfo(adap, i);
+ pi->first_qset = n;
+ n += pi->nqsets;
+ }
+}
+
+/* 2 MSI-X vectors needed for the FW queue and non-data interrupts */
+#define EXTRA_VECS 2
+
+static int __devinit enable_msix(struct adapter *adap)
+{
+ int ofld_need = 0;
+ int i, err, want, need;
+ struct sge *s = &adap->sge;
+ unsigned int nchan = adap->params.nports;
+ struct msix_entry entries[MAX_INGQ + 1];
+
+ for (i = 0; i < ARRAY_SIZE(entries); ++i)
+ entries[i].entry = i;
+
+ want = s->max_ethqsets + EXTRA_VECS;
+ if (is_offload(adap)) {
+ want += s->rdmaqs + s->ofldqsets;
+ /* need nchan for each possible ULD */
+ ofld_need = 2 * nchan;
+ }
+ need = adap->params.nports + EXTRA_VECS + ofld_need;
+
+ while ((err = pci_enable_msix(adap->pdev, entries, want)) >= need)
+ want = err;
+
+ if (!err) {
+ /*
+ * Distribute available vectors to the various queue groups.
+ * Every group gets its minimum requirement and NIC gets top
+ * priority for leftovers.
+ */
+ i = want - EXTRA_VECS - ofld_need;
+ if (i < s->max_ethqsets) {
+ s->max_ethqsets = i;
+ if (i < s->ethqsets)
+ reduce_ethqs(adap, i);
+ }
+ if (is_offload(adap)) {
+ i = want - EXTRA_VECS - s->max_ethqsets;
+ i -= ofld_need - nchan;
+ s->ofldqsets = (i / nchan) * nchan; /* round down */
+ }
+ for (i = 0; i < want; ++i)
+ adap->msix_info[i].vec = entries[i].vector;
+ } else if (err > 0)
+ dev_info(adap->pdev_dev,
+ "only %d MSI-X vectors left, not using MSI-X\n", err);
+ return err;
+}
+
+#undef EXTRA_VECS
+
+static void __devinit print_port_info(struct adapter *adap)
+{
+ static const char *base[] = {
+ "R", "KX4", "T", "KX", "T", "KR", "CX4"
+ };
+
+ int i;
+ char buf[80];
+
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+ const struct port_info *pi = netdev_priv(dev);
+ char *bufp = buf;
+
+ if (!test_bit(i, &adap->registered_device_map))
+ continue;
+
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
+ bufp += sprintf(bufp, "100/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
+ bufp += sprintf(bufp, "1000/");
+ if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
+ bufp += sprintf(bufp, "10G/");
+ if (bufp != buf)
+ --bufp;
+ sprintf(bufp, "BASE-%s", base[pi->port_type]);
+
+ netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s\n",
+ adap->params.vpd.id, adap->params.rev,
+ buf, is_offload(adap) ? "R" : "",
+ adap->params.pci.width,
+ (adap->flags & USING_MSIX) ? " MSI-X" :
+ (adap->flags & USING_MSI) ? " MSI" : "");
+ if (adap->name == dev->name)
+ netdev_info(dev, "S/N: %s, E/C: %s\n",
+ adap->params.vpd.sn, adap->params.vpd.ec);
+ }
+}
+
+#define VLAN_FEAT (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO | NETIF_F_TSO6 |\
+ NETIF_F_IPV6_CSUM | NETIF_F_HIGHDMA)
+
+static int __devinit init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int func, i, err;
+ struct port_info *pi;
+ unsigned int highdma = 0;
+ struct adapter *adapter = NULL;
+
+ printk_once(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
+
+ err = pci_request_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ /* Just info, some other driver may have claimed the device. */
+ dev_info(&pdev->dev, "cannot obtain PCI resources\n");
+ return err;
+ }
+
+ /* We control everything through PF 0 */
+ func = PCI_FUNC(pdev->devfn);
+ if (func > 0)
+ goto sriov;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
+ goto out_release_regions;
+ }
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ highdma = NETIF_F_HIGHDMA;
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pdev->dev, "unable to obtain 64-bit DMA for "
+ "coherent allocations\n");
+ goto out_disable_device;
+ }
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
+ goto out_disable_device;
+ }
+ }
+
+ pci_enable_pcie_error_reporting(pdev);
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+ adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+ if (!adapter) {
+ err = -ENOMEM;
+ goto out_disable_device;
+ }
+
+ adapter->regs = pci_ioremap_bar(pdev, 0);
+ if (!adapter->regs) {
+ dev_err(&pdev->dev, "cannot map device registers\n");
+ err = -ENOMEM;
+ goto out_free_adapter;
+ }
+
+ adapter->pdev = pdev;
+ adapter->pdev_dev = &pdev->dev;
+ adapter->name = pci_name(pdev);
+ adapter->msg_enable = dflt_msg_enable;
+ memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map));
+
+ spin_lock_init(&adapter->stats_lock);
+ spin_lock_init(&adapter->tid_release_lock);
+
+ INIT_WORK(&adapter->tid_release_task, process_tid_release_list);
+
+ err = t4_prep_adapter(adapter);
+ if (err)
+ goto out_unmap_bar;
+ err = adap_init0(adapter);
+ if (err)
+ goto out_unmap_bar;
+
+ for_each_port(adapter, i) {
+ struct net_device *netdev;
+
+ netdev = alloc_etherdev_mq(sizeof(struct port_info),
+ MAX_ETH_QSETS);
+ if (!netdev) {
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ adapter->port[i] = netdev;
+ pi = netdev_priv(netdev);
+ pi->adapter = adapter;
+ pi->xact_addr_filt = -1;
+ pi->rx_offload = RX_CSO;
+ pi->port_id = i;
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+ netdev->irq = pdev->irq;
+
+ netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6;
+ netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+ netdev->features |= NETIF_F_GRO | highdma;
+ netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->vlan_features = netdev->features & VLAN_FEAT;
+
+ netdev->netdev_ops = &cxgb4_netdev_ops;
+ SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
+ }
+
+ pci_set_drvdata(pdev, adapter);
+
+ if (adapter->flags & FW_OK) {
+ err = t4_port_init(adapter, 0, 0, 0);
+ if (err)
+ goto out_free_dev;
+ }
+
+ /*
+ * Configure queues and allocate tables now, they can be needed as
+ * soon as the first register_netdev completes.
+ */
+ cfg_queues(adapter);
+
+ adapter->l2t = t4_init_l2t();
+ if (!adapter->l2t) {
+ /* We tolerate a lack of L2T, giving up some functionality */
+ dev_warn(&pdev->dev, "could not allocate L2T, continuing\n");
+ adapter->params.offload = 0;
+ }
+
+ if (is_offload(adapter) && tid_init(&adapter->tids) < 0) {
+ dev_warn(&pdev->dev, "could not allocate TID table, "
+ "continuing\n");
+ adapter->params.offload = 0;
+ }
+
+ /*
+ * The card is now ready to go. If any errors occur during device
+ * registration we do not fail the whole card but rather proceed only
+ * with the ports we manage to register successfully. However we must
+ * register at least one net device.
+ */
+ for_each_port(adapter, i) {
+ err = register_netdev(adapter->port[i]);
+ if (err)
+ dev_warn(&pdev->dev,
+ "cannot register net device %s, skipping\n",
+ adapter->port[i]->name);
+ else {
+ /*
+ * Change the name we use for messages to the name of
+ * the first successfully registered interface.
+ */
+ if (!adapter->registered_device_map)
+ adapter->name = adapter->port[i]->name;
+
+ __set_bit(i, &adapter->registered_device_map);
+ adapter->chan_map[adap2pinfo(adapter, i)->tx_chan] = i;
+ }
+ }
+ if (!adapter->registered_device_map) {
+ dev_err(&pdev->dev, "could not register any net devices\n");
+ goto out_free_dev;
+ }
+
+ if (cxgb4_debugfs_root) {
+ adapter->debugfs_root = debugfs_create_dir(pci_name(pdev),
+ cxgb4_debugfs_root);
+ setup_debugfs(adapter);
+ }
+
+ /* See what interrupts we'll be using */
+ if (msi > 1 && enable_msix(adapter) == 0)
+ adapter->flags |= USING_MSIX;
+ else if (msi > 0 && pci_enable_msi(pdev) == 0)
+ adapter->flags |= USING_MSI;
+
+ if (is_offload(adapter))
+ attach_ulds(adapter);
+
+ print_port_info(adapter);
+
+sriov:
+#ifdef CONFIG_PCI_IOV
+ if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0)
+ if (pci_enable_sriov(pdev, num_vf[func]) == 0)
+ dev_info(&pdev->dev,
+ "instantiated %u virtual functions\n",
+ num_vf[func]);
+#endif
+ return 0;
+
+ out_free_dev:
+ t4_free_mem(adapter->tids.tid_tab);
+ t4_free_mem(adapter->l2t);
+ for_each_port(adapter, i)
+ if (adapter->port[i])
+ free_netdev(adapter->port[i]);
+ if (adapter->flags & FW_OK)
+ t4_fw_bye(adapter, 0);
+ out_unmap_bar:
+ iounmap(adapter->regs);
+ out_free_adapter:
+ kfree(adapter);
+ out_disable_device:
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ out_release_regions:
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void __devexit remove_one(struct pci_dev *pdev)
+{
+ struct adapter *adapter = pci_get_drvdata(pdev);
+
+ pci_disable_sriov(pdev);
+
+ if (adapter) {
+ int i;
+
+ if (is_offload(adapter))
+ detach_ulds(adapter);
+
+ for_each_port(adapter, i)
+ if (test_bit(i, &adapter->registered_device_map))
+ unregister_netdev(adapter->port[i]);
+
+ if (adapter->debugfs_root)
+ debugfs_remove_recursive(adapter->debugfs_root);
+
+ t4_sge_stop(adapter);
+ t4_free_sge_resources(adapter);
+ t4_free_mem(adapter->l2t);
+ t4_free_mem(adapter->tids.tid_tab);
+ disable_msi(adapter);
+
+ for_each_port(adapter, i)
+ if (adapter->port[i])
+ free_netdev(adapter->port[i]);
+
+ if (adapter->flags & FW_OK)
+ t4_fw_bye(adapter, 0);
+ iounmap(adapter->regs);
+ kfree(adapter);
+ pci_disable_pcie_error_reporting(pdev);
+ pci_disable_device(pdev);
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+ } else if (PCI_FUNC(pdev->devfn) > 0)
+ pci_release_regions(pdev);
+}
+
+static struct pci_driver cxgb4_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = cxgb4_pci_tbl,
+ .probe = init_one,
+ .remove = __devexit_p(remove_one),
+};
+
+static int __init cxgb4_init_module(void)
+{
+ int ret;
+
+ /* Debugfs support is optional, just warn if this fails */
+ cxgb4_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!cxgb4_debugfs_root)
+ pr_warning("could not create debugfs entry, continuing\n");
+
+ ret = pci_register_driver(&cxgb4_driver);
+ if (ret < 0)
+ debugfs_remove(cxgb4_debugfs_root);
+ return ret;
+}
+
+static void __exit cxgb4_cleanup_module(void)
+{
+ pci_unregister_driver(&cxgb4_driver);
+ debugfs_remove(cxgb4_debugfs_root); /* NULL ok */
+}
+
+module_init(cxgb4_init_module);
+module_exit(cxgb4_cleanup_module);
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CXGB4_OFLD_H
+#define __CXGB4_OFLD_H
+
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <asm/atomic.h>
+
+/* CPL message priority levels */
+enum {
+ CPL_PRIORITY_DATA = 0, /* data messages */
+ CPL_PRIORITY_SETUP = 1, /* connection setup messages */
+ CPL_PRIORITY_TEARDOWN = 0, /* connection teardown messages */
+ CPL_PRIORITY_LISTEN = 1, /* listen start/stop messages */
+ CPL_PRIORITY_ACK = 1, /* RX ACK messages */
+ CPL_PRIORITY_CONTROL = 1 /* control messages */
+};
+
+#define INIT_TP_WR(w, tid) do { \
+ (w)->wr.wr_hi = htonl(FW_WR_OP(FW_TP_WR) | \
+ FW_WR_IMMDLEN(sizeof(*w) - sizeof(w->wr))); \
+ (w)->wr.wr_mid = htonl(FW_WR_LEN16(DIV_ROUND_UP(sizeof(*w), 16)) | \
+ FW_WR_FLOWID(tid)); \
+ (w)->wr.wr_lo = cpu_to_be64(0); \
+} while (0)
+
+#define INIT_TP_WR_CPL(w, cpl, tid) do { \
+ INIT_TP_WR(w, tid); \
+ OPCODE_TID(w) = htonl(MK_OPCODE_TID(cpl, tid)); \
+} while (0)
+
+#define INIT_ULPTX_WR(w, wrlen, atomic, tid) do { \
+ (w)->wr.wr_hi = htonl(FW_WR_OP(FW_ULPTX_WR) | FW_WR_ATOMIC(atomic)); \
+ (w)->wr.wr_mid = htonl(FW_WR_LEN16(DIV_ROUND_UP(wrlen, 16)) | \
+ FW_WR_FLOWID(tid)); \
+ (w)->wr.wr_lo = cpu_to_be64(0); \
+} while (0)
+
+/* Special asynchronous notification message */
+#define CXGB4_MSG_AN ((void *)1)
+
+struct serv_entry {
+ void *data;
+};
+
+union aopen_entry {
+ void *data;
+ union aopen_entry *next;
+};
+
+/*
+ * Holds the size, base address, free list start, etc of the TID, server TID,
+ * and active-open TID tables. The tables themselves are allocated dynamically.
+ */
+struct tid_info {
+ void **tid_tab;
+ unsigned int ntids;
+
+ struct serv_entry *stid_tab;
+ unsigned long *stid_bmap;
+ unsigned int nstids;
+ unsigned int stid_base;
+
+ union aopen_entry *atid_tab;
+ unsigned int natids;
+
+ unsigned int nftids;
+ unsigned int ftid_base;
+
+ spinlock_t atid_lock ____cacheline_aligned_in_smp;
+ union aopen_entry *afree;
+ unsigned int atids_in_use;
+
+ spinlock_t stid_lock;
+ unsigned int stids_in_use;
+
+ atomic_t tids_in_use;
+};
+
+static inline void *lookup_tid(const struct tid_info *t, unsigned int tid)
+{
+ return tid < t->ntids ? t->tid_tab[tid] : NULL;
+}
+
+static inline void *lookup_atid(const struct tid_info *t, unsigned int atid)
+{
+ return atid < t->natids ? t->atid_tab[atid].data : NULL;
+}
+
+static inline void *lookup_stid(const struct tid_info *t, unsigned int stid)
+{
+ stid -= t->stid_base;
+ return stid < t->nstids ? t->stid_tab[stid].data : NULL;
+}
+
+static inline void cxgb4_insert_tid(struct tid_info *t, void *data,
+ unsigned int tid)
+{
+ t->tid_tab[tid] = data;
+ atomic_inc(&t->tids_in_use);
+}
+
+int cxgb4_alloc_atid(struct tid_info *t, void *data);
+int cxgb4_alloc_stid(struct tid_info *t, int family, void *data);
+void cxgb4_free_atid(struct tid_info *t, unsigned int atid);
+void cxgb4_free_stid(struct tid_info *t, unsigned int stid, int family);
+void cxgb4_remove_tid(struct tid_info *t, unsigned int qid, unsigned int tid);
+void cxgb4_queue_tid_release(struct tid_info *t, unsigned int chan,
+ unsigned int tid);
+
+struct in6_addr;
+
+int cxgb4_create_server(const struct net_device *dev, unsigned int stid,
+ __be32 sip, __be16 sport, unsigned int queue);
+int cxgb4_create_server6(const struct net_device *dev, unsigned int stid,
+ const struct in6_addr *sip, __be16 sport,
+ unsigned int queue);
+
+static inline void set_wr_txq(struct sk_buff *skb, int prio, int queue)
+{
+ skb_set_queue_mapping(skb, (queue << 1) | prio);
+}
+
+enum cxgb4_uld {
+ CXGB4_ULD_RDMA,
+ CXGB4_ULD_ISCSI,
+ CXGB4_ULD_MAX
+};
+
+enum cxgb4_state {
+ CXGB4_STATE_UP,
+ CXGB4_STATE_START_RECOVERY,
+ CXGB4_STATE_DOWN,
+ CXGB4_STATE_DETACH
+};
+
+struct pci_dev;
+struct l2t_data;
+struct net_device;
+struct pkt_gl;
+struct tp_tcp_stats;
+
+struct cxgb4_range {
+ unsigned int start;
+ unsigned int size;
+};
+
+struct cxgb4_virt_res { /* virtualized HW resources */
+ struct cxgb4_range ddp;
+ struct cxgb4_range iscsi;
+ struct cxgb4_range stag;
+ struct cxgb4_range rq;
+ struct cxgb4_range pbl;
+};
+
+/*
+ * Block of information the LLD provides to ULDs attaching to a device.
+ */
+struct cxgb4_lld_info {
+ struct pci_dev *pdev; /* associated PCI device */
+ struct l2t_data *l2t; /* L2 table */
+ struct tid_info *tids; /* TID table */
+ struct net_device **ports; /* device ports */
+ const struct cxgb4_virt_res *vr; /* assorted HW resources */
+ const unsigned short *mtus; /* MTU table */
+ const unsigned short *rxq_ids; /* the ULD's Rx queue ids */
+ unsigned short nrxq; /* # of Rx queues */
+ unsigned short ntxq; /* # of Tx queues */
+ unsigned char nchan:4; /* # of channels */
+ unsigned char nports:4; /* # of ports */
+ unsigned char wr_cred; /* WR 16-byte credits */
+ unsigned char adapter_type; /* type of adapter */
+ unsigned char fw_api_ver; /* FW API version */
+ unsigned int fw_vers; /* FW version */
+ unsigned int iscsi_iolen; /* iSCSI max I/O length */
+ unsigned short udb_density; /* # of user DB/page */
+ unsigned short ucq_density; /* # of user CQs/page */
+ void __iomem *gts_reg; /* address of GTS register */
+ void __iomem *db_reg; /* address of kernel doorbell */
+};
+
+struct cxgb4_uld_info {
+ const char *name;
+ void *(*add)(const struct cxgb4_lld_info *p);
+ int (*rx_handler)(void *handle, const __be64 *rsp,
+ const struct pkt_gl *gl);
+ int (*state_change)(void *handle, enum cxgb4_state new_state);
+};
+
+int cxgb4_register_uld(enum cxgb4_uld type, const struct cxgb4_uld_info *p);
+int cxgb4_unregister_uld(enum cxgb4_uld type);
+int cxgb4_ofld_send(struct net_device *dev, struct sk_buff *skb);
+unsigned int cxgb4_port_chan(const struct net_device *dev);
+unsigned int cxgb4_port_viid(const struct net_device *dev);
+unsigned int cxgb4_port_idx(const struct net_device *dev);
+struct net_device *cxgb4_netdev_by_hwid(struct pci_dev *pdev, unsigned int id);
+unsigned int cxgb4_best_mtu(const unsigned short *mtus, unsigned short mtu,
+ unsigned int *idx);
+void cxgb4_get_tcp_stats(struct pci_dev *pdev, struct tp_tcp_stats *v4,
+ struct tp_tcp_stats *v6);
+void cxgb4_iscsi_init(struct net_device *dev, unsigned int tag_mask,
+ const unsigned int *pgsz_order);
+struct sk_buff *cxgb4_pktgl_to_skb(const struct pkt_gl *gl,
+ unsigned int skb_len, unsigned int pull_len);
+#endif /* !__CXGB4_OFLD_H */
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/jhash.h>
+#include <net/neighbour.h>
+#include "cxgb4.h"
+#include "l2t.h"
+#include "t4_msg.h"
+#include "t4fw_api.h"
+
+#define VLAN_NONE 0xfff
+
+/* identifies sync vs async L2T_WRITE_REQs */
+#define F_SYNC_WR (1 << 12)
+
+enum {
+ L2T_STATE_VALID, /* entry is up to date */
+ L2T_STATE_STALE, /* entry may be used but needs revalidation */
+ L2T_STATE_RESOLVING, /* entry needs address resolution */
+ L2T_STATE_SYNC_WRITE, /* synchronous write of entry underway */
+
+ /* when state is one of the below the entry is not hashed */
+ L2T_STATE_SWITCHING, /* entry is being used by a switching filter */
+ L2T_STATE_UNUSED /* entry not in use */
+};
+
+struct l2t_data {
+ rwlock_t lock;
+ atomic_t nfree; /* number of free entries */
+ struct l2t_entry *rover; /* starting point for next allocation */
+ struct l2t_entry l2tab[L2T_SIZE];
+};
+
+static inline unsigned int vlan_prio(const struct l2t_entry *e)
+{
+ return e->vlan >> 13;
+}
+
+static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e)
+{
+ if (atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */
+ atomic_dec(&d->nfree);
+}
+
+/*
+ * To avoid having to check address families we do not allow v4 and v6
+ * neighbors to be on the same hash chain. We keep v4 entries in the first
+ * half of available hash buckets and v6 in the second.
+ */
+enum {
+ L2T_SZ_HALF = L2T_SIZE / 2,
+ L2T_HASH_MASK = L2T_SZ_HALF - 1
+};
+
+static inline unsigned int arp_hash(const u32 *key, int ifindex)
+{
+ return jhash_2words(*key, ifindex, 0) & L2T_HASH_MASK;
+}
+
+static inline unsigned int ipv6_hash(const u32 *key, int ifindex)
+{
+ u32 xor = key[0] ^ key[1] ^ key[2] ^ key[3];
+
+ return L2T_SZ_HALF + (jhash_2words(xor, ifindex, 0) & L2T_HASH_MASK);
+}
+
+static unsigned int addr_hash(const u32 *addr, int addr_len, int ifindex)
+{
+ return addr_len == 4 ? arp_hash(addr, ifindex) :
+ ipv6_hash(addr, ifindex);
+}
+
+/*
+ * Checks if an L2T entry is for the given IP/IPv6 address. It does not check
+ * whether the L2T entry and the address are of the same address family.
+ * Callers ensure an address is only checked against L2T entries of the same
+ * family, something made trivial by the separation of IP and IPv6 hash chains
+ * mentioned above. Returns 0 if there's a match,
+ */
+static int addreq(const struct l2t_entry *e, const u32 *addr)
+{
+ if (e->v6)
+ return (e->addr[0] ^ addr[0]) | (e->addr[1] ^ addr[1]) |
+ (e->addr[2] ^ addr[2]) | (e->addr[3] ^ addr[3]);
+ return e->addr[0] ^ addr[0];
+}
+
+static void neigh_replace(struct l2t_entry *e, struct neighbour *n)
+{
+ neigh_hold(n);
+ if (e->neigh)
+ neigh_release(e->neigh);
+ e->neigh = n;
+}
+
+/*
+ * Write an L2T entry. Must be called with the entry locked.
+ * The write may be synchronous or asynchronous.
+ */
+static int write_l2e(struct adapter *adap, struct l2t_entry *e, int sync)
+{
+ struct sk_buff *skb;
+ struct cpl_l2t_write_req *req;
+
+ skb = alloc_skb(sizeof(*req), GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+
+ req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req));
+ INIT_TP_WR(req, 0);
+
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ,
+ e->idx | (sync ? F_SYNC_WR : 0) |
+ TID_QID(adap->sge.fw_evtq.abs_id)));
+ req->params = htons(L2T_W_PORT(e->lport) | L2T_W_NOREPLY(!sync));
+ req->l2t_idx = htons(e->idx);
+ req->vlan = htons(e->vlan);
+ if (e->neigh)
+ memcpy(e->dmac, e->neigh->ha, sizeof(e->dmac));
+ memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac));
+
+ set_wr_txq(skb, CPL_PRIORITY_CONTROL, 0);
+ t4_ofld_send(adap, skb);
+
+ if (sync && e->state != L2T_STATE_SWITCHING)
+ e->state = L2T_STATE_SYNC_WRITE;
+ return 0;
+}
+
+/*
+ * Send packets waiting in an L2T entry's ARP queue. Must be called with the
+ * entry locked.
+ */
+static void send_pending(struct adapter *adap, struct l2t_entry *e)
+{
+ while (e->arpq_head) {
+ struct sk_buff *skb = e->arpq_head;
+
+ e->arpq_head = skb->next;
+ skb->next = NULL;
+ t4_ofld_send(adap, skb);
+ }
+ e->arpq_tail = NULL;
+}
+
+/*
+ * Process a CPL_L2T_WRITE_RPL. Wake up the ARP queue if it completes a
+ * synchronous L2T_WRITE. Note that the TID in the reply is really the L2T
+ * index it refers to.
+ */
+void do_l2t_write_rpl(struct adapter *adap, const struct cpl_l2t_write_rpl *rpl)
+{
+ unsigned int tid = GET_TID(rpl);
+ unsigned int idx = tid & (L2T_SIZE - 1);
+
+ if (unlikely(rpl->status != CPL_ERR_NONE)) {
+ dev_err(adap->pdev_dev,
+ "Unexpected L2T_WRITE_RPL status %u for entry %u\n",
+ rpl->status, idx);
+ return;
+ }
+
+ if (tid & F_SYNC_WR) {
+ struct l2t_entry *e = &adap->l2t->l2tab[idx];
+
+ spin_lock(&e->lock);
+ if (e->state != L2T_STATE_SWITCHING) {
+ send_pending(adap, e);
+ e->state = (e->neigh->nud_state & NUD_STALE) ?
+ L2T_STATE_STALE : L2T_STATE_VALID;
+ }
+ spin_unlock(&e->lock);
+ }
+}
+
+/*
+ * Add a packet to an L2T entry's queue of packets awaiting resolution.
+ * Must be called with the entry's lock held.
+ */
+static inline void arpq_enqueue(struct l2t_entry *e, struct sk_buff *skb)
+{
+ skb->next = NULL;
+ if (e->arpq_head)
+ e->arpq_tail->next = skb;
+ else
+ e->arpq_head = skb;
+ e->arpq_tail = skb;
+}
+
+int cxgb4_l2t_send(struct net_device *dev, struct sk_buff *skb,
+ struct l2t_entry *e)
+{
+ struct adapter *adap = netdev2adap(dev);
+
+again:
+ switch (e->state) {
+ case L2T_STATE_STALE: /* entry is stale, kick off revalidation */
+ neigh_event_send(e->neigh, NULL);
+ spin_lock_bh(&e->lock);
+ if (e->state == L2T_STATE_STALE)
+ e->state = L2T_STATE_VALID;
+ spin_unlock_bh(&e->lock);
+ case L2T_STATE_VALID: /* fast-path, send the packet on */
+ return t4_ofld_send(adap, skb);
+ case L2T_STATE_RESOLVING:
+ case L2T_STATE_SYNC_WRITE:
+ spin_lock_bh(&e->lock);
+ if (e->state != L2T_STATE_SYNC_WRITE &&
+ e->state != L2T_STATE_RESOLVING) {
+ spin_unlock_bh(&e->lock);
+ goto again;
+ }
+ arpq_enqueue(e, skb);
+ spin_unlock_bh(&e->lock);
+
+ if (e->state == L2T_STATE_RESOLVING &&
+ !neigh_event_send(e->neigh, NULL)) {
+ spin_lock_bh(&e->lock);
+ if (e->state == L2T_STATE_RESOLVING && e->arpq_head)
+ write_l2e(adap, e, 1);
+ spin_unlock_bh(&e->lock);
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL(cxgb4_l2t_send);
+
+/*
+ * Allocate a free L2T entry. Must be called with l2t_data.lock held.
+ */
+static struct l2t_entry *alloc_l2e(struct l2t_data *d)
+{
+ struct l2t_entry *end, *e, **p;
+
+ if (!atomic_read(&d->nfree))
+ return NULL;
+
+ /* there's definitely a free entry */
+ for (e = d->rover, end = &d->l2tab[L2T_SIZE]; e != end; ++e)
+ if (atomic_read(&e->refcnt) == 0)
+ goto found;
+
+ for (e = d->l2tab; atomic_read(&e->refcnt); ++e)
+ ;
+found:
+ d->rover = e + 1;
+ atomic_dec(&d->nfree);
+
+ /*
+ * The entry we found may be an inactive entry that is
+ * presently in the hash table. We need to remove it.
+ */
+ if (e->state < L2T_STATE_SWITCHING)
+ for (p = &d->l2tab[e->hash].first; *p; p = &(*p)->next)
+ if (*p == e) {
+ *p = e->next;
+ e->next = NULL;
+ break;
+ }
+
+ e->state = L2T_STATE_UNUSED;
+ return e;
+}
+
+/*
+ * Called when an L2T entry has no more users.
+ */
+static void t4_l2e_free(struct l2t_entry *e)
+{
+ struct l2t_data *d;
+
+ spin_lock_bh(&e->lock);
+ if (atomic_read(&e->refcnt) == 0) { /* hasn't been recycled */
+ if (e->neigh) {
+ neigh_release(e->neigh);
+ e->neigh = NULL;
+ }
+ }
+ spin_unlock_bh(&e->lock);
+
+ d = container_of(e, struct l2t_data, l2tab[e->idx]);
+ atomic_inc(&d->nfree);
+}
+
+void cxgb4_l2t_release(struct l2t_entry *e)
+{
+ if (atomic_dec_and_test(&e->refcnt))
+ t4_l2e_free(e);
+}
+EXPORT_SYMBOL(cxgb4_l2t_release);
+
+/*
+ * Update an L2T entry that was previously used for the same next hop as neigh.
+ * Must be called with softirqs disabled.
+ */
+static void reuse_entry(struct l2t_entry *e, struct neighbour *neigh)
+{
+ unsigned int nud_state;
+
+ spin_lock(&e->lock); /* avoid race with t4_l2t_free */
+ if (neigh != e->neigh)
+ neigh_replace(e, neigh);
+ nud_state = neigh->nud_state;
+ if (memcmp(e->dmac, neigh->ha, sizeof(e->dmac)) ||
+ !(nud_state & NUD_VALID))
+ e->state = L2T_STATE_RESOLVING;
+ else if (nud_state & NUD_CONNECTED)
+ e->state = L2T_STATE_VALID;
+ else
+ e->state = L2T_STATE_STALE;
+ spin_unlock(&e->lock);
+}
+
+struct l2t_entry *cxgb4_l2t_get(struct l2t_data *d, struct neighbour *neigh,
+ const struct net_device *physdev,
+ unsigned int priority)
+{
+ u8 lport;
+ u16 vlan;
+ struct l2t_entry *e;
+ int addr_len = neigh->tbl->key_len;
+ u32 *addr = (u32 *)neigh->primary_key;
+ int ifidx = neigh->dev->ifindex;
+ int hash = addr_hash(addr, addr_len, ifidx);
+
+ if (neigh->dev->flags & IFF_LOOPBACK)
+ lport = netdev2pinfo(physdev)->tx_chan + 4;
+ else
+ lport = netdev2pinfo(physdev)->lport;
+
+ if (neigh->dev->priv_flags & IFF_802_1Q_VLAN)
+ vlan = vlan_dev_vlan_id(neigh->dev);
+ else
+ vlan = VLAN_NONE;
+
+ write_lock_bh(&d->lock);
+ for (e = d->l2tab[hash].first; e; e = e->next)
+ if (!addreq(e, addr) && e->ifindex == ifidx &&
+ e->vlan == vlan && e->lport == lport) {
+ l2t_hold(d, e);
+ if (atomic_read(&e->refcnt) == 1)
+ reuse_entry(e, neigh);
+ goto done;
+ }
+
+ /* Need to allocate a new entry */
+ e = alloc_l2e(d);
+ if (e) {
+ spin_lock(&e->lock); /* avoid race with t4_l2t_free */
+ e->state = L2T_STATE_RESOLVING;
+ memcpy(e->addr, addr, addr_len);
+ e->ifindex = ifidx;
+ e->hash = hash;
+ e->lport = lport;
+ e->v6 = addr_len == 16;
+ atomic_set(&e->refcnt, 1);
+ neigh_replace(e, neigh);
+ e->vlan = vlan;
+ e->next = d->l2tab[hash].first;
+ d->l2tab[hash].first = e;
+ spin_unlock(&e->lock);
+ }
+done:
+ write_unlock_bh(&d->lock);
+ return e;
+}
+EXPORT_SYMBOL(cxgb4_l2t_get);
+
+/*
+ * Called when address resolution fails for an L2T entry to handle packets
+ * on the arpq head. If a packet specifies a failure handler it is invoked,
+ * otherwise the packet is sent to the device.
+ */
+static void handle_failed_resolution(struct adapter *adap, struct sk_buff *arpq)
+{
+ while (arpq) {
+ struct sk_buff *skb = arpq;
+ const struct l2t_skb_cb *cb = L2T_SKB_CB(skb);
+
+ arpq = skb->next;
+ skb->next = NULL;
+ if (cb->arp_err_handler)
+ cb->arp_err_handler(cb->handle, skb);
+ else
+ t4_ofld_send(adap, skb);
+ }
+}
+
+/*
+ * Called when the host's neighbor layer makes a change to some entry that is
+ * loaded into the HW L2 table.
+ */
+void t4_l2t_update(struct adapter *adap, struct neighbour *neigh)
+{
+ struct l2t_entry *e;
+ struct sk_buff *arpq = NULL;
+ struct l2t_data *d = adap->l2t;
+ int addr_len = neigh->tbl->key_len;
+ u32 *addr = (u32 *) neigh->primary_key;
+ int ifidx = neigh->dev->ifindex;
+ int hash = addr_hash(addr, addr_len, ifidx);
+
+ read_lock_bh(&d->lock);
+ for (e = d->l2tab[hash].first; e; e = e->next)
+ if (!addreq(e, addr) && e->ifindex == ifidx) {
+ spin_lock(&e->lock);
+ if (atomic_read(&e->refcnt))
+ goto found;
+ spin_unlock(&e->lock);
+ break;
+ }
+ read_unlock_bh(&d->lock);
+ return;
+
+ found:
+ read_unlock(&d->lock);
+
+ if (neigh != e->neigh)
+ neigh_replace(e, neigh);
+
+ if (e->state == L2T_STATE_RESOLVING) {
+ if (neigh->nud_state & NUD_FAILED) {
+ arpq = e->arpq_head;
+ e->arpq_head = e->arpq_tail = NULL;
+ } else if ((neigh->nud_state & (NUD_CONNECTED | NUD_STALE)) &&
+ e->arpq_head) {
+ write_l2e(adap, e, 1);
+ }
+ } else {
+ e->state = neigh->nud_state & NUD_CONNECTED ?
+ L2T_STATE_VALID : L2T_STATE_STALE;
+ if (memcmp(e->dmac, neigh->ha, sizeof(e->dmac)))
+ write_l2e(adap, e, 0);
+ }
+
+ spin_unlock_bh(&e->lock);
+
+ if (arpq)
+ handle_failed_resolution(adap, arpq);
+}
+
+/*
+ * Allocate an L2T entry for use by a switching rule. Such entries need to be
+ * explicitly freed and while busy they are not on any hash chain, so normal
+ * address resolution updates do not see them.
+ */
+struct l2t_entry *t4_l2t_alloc_switching(struct l2t_data *d)
+{
+ struct l2t_entry *e;
+
+ write_lock_bh(&d->lock);
+ e = alloc_l2e(d);
+ if (e) {
+ spin_lock(&e->lock); /* avoid race with t4_l2t_free */
+ e->state = L2T_STATE_SWITCHING;
+ atomic_set(&e->refcnt, 1);
+ spin_unlock(&e->lock);
+ }
+ write_unlock_bh(&d->lock);
+ return e;
+}
+
+/*
+ * Sets/updates the contents of a switching L2T entry that has been allocated
+ * with an earlier call to @t4_l2t_alloc_switching.
+ */
+int t4_l2t_set_switching(struct adapter *adap, struct l2t_entry *e, u16 vlan,
+ u8 port, u8 *eth_addr)
+{
+ e->vlan = vlan;
+ e->lport = port;
+ memcpy(e->dmac, eth_addr, ETH_ALEN);
+ return write_l2e(adap, e, 0);
+}
+
+struct l2t_data *t4_init_l2t(void)
+{
+ int i;
+ struct l2t_data *d;
+
+ d = t4_alloc_mem(sizeof(*d));
+ if (!d)
+ return NULL;
+
+ d->rover = d->l2tab;
+ atomic_set(&d->nfree, L2T_SIZE);
+ rwlock_init(&d->lock);
+
+ for (i = 0; i < L2T_SIZE; ++i) {
+ d->l2tab[i].idx = i;
+ d->l2tab[i].state = L2T_STATE_UNUSED;
+ spin_lock_init(&d->l2tab[i].lock);
+ atomic_set(&d->l2tab[i].refcnt, 0);
+ }
+ return d;
+}
+
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static inline void *l2t_get_idx(struct seq_file *seq, loff_t pos)
+{
+ struct l2t_entry *l2tab = seq->private;
+
+ return pos >= L2T_SIZE ? NULL : &l2tab[pos];
+}
+
+static void *l2t_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ return *pos ? l2t_get_idx(seq, *pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *l2t_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ v = l2t_get_idx(seq, *pos);
+ if (v)
+ ++*pos;
+ return v;
+}
+
+static void l2t_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static char l2e_state(const struct l2t_entry *e)
+{
+ switch (e->state) {
+ case L2T_STATE_VALID: return 'V';
+ case L2T_STATE_STALE: return 'S';
+ case L2T_STATE_SYNC_WRITE: return 'W';
+ case L2T_STATE_RESOLVING: return e->arpq_head ? 'A' : 'R';
+ case L2T_STATE_SWITCHING: return 'X';
+ default:
+ return 'U';
+ }
+}
+
+static int l2t_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_puts(seq, " Idx IP address "
+ "Ethernet address VLAN/P LP State Users Port\n");
+ else {
+ char ip[60];
+ struct l2t_entry *e = v;
+
+ spin_lock_bh(&e->lock);
+ if (e->state == L2T_STATE_SWITCHING)
+ ip[0] = '\0';
+ else
+ sprintf(ip, e->v6 ? "%pI6c" : "%pI4", e->addr);
+ seq_printf(seq, "%4u %-25s %17pM %4d %u %2u %c %5u %s\n",
+ e->idx, ip, e->dmac,
+ e->vlan & VLAN_VID_MASK, vlan_prio(e), e->lport,
+ l2e_state(e), atomic_read(&e->refcnt),
+ e->neigh ? e->neigh->dev->name : "");
+ spin_unlock_bh(&e->lock);
+ }
+ return 0;
+}
+
+static const struct seq_operations l2t_seq_ops = {
+ .start = l2t_seq_start,
+ .next = l2t_seq_next,
+ .stop = l2t_seq_stop,
+ .show = l2t_seq_show
+};
+
+static int l2t_seq_open(struct inode *inode, struct file *file)
+{
+ int rc = seq_open(file, &l2t_seq_ops);
+
+ if (!rc) {
+ struct adapter *adap = inode->i_private;
+ struct seq_file *seq = file->private_data;
+
+ seq->private = adap->l2t->l2tab;
+ }
+ return rc;
+}
+
+const struct file_operations t4_l2t_fops = {
+ .owner = THIS_MODULE,
+ .open = l2t_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __CXGB4_L2T_H
+#define __CXGB4_L2T_H
+
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <asm/atomic.h>
+
+struct adapter;
+struct l2t_data;
+struct neighbour;
+struct net_device;
+struct file_operations;
+struct cpl_l2t_write_rpl;
+
+/*
+ * Each L2T entry plays multiple roles. First of all, it keeps state for the
+ * corresponding entry of the HW L2 table and maintains a queue of offload
+ * packets awaiting address resolution. Second, it is a node of a hash table
+ * chain, where the nodes of the chain are linked together through their next
+ * pointer. Finally, each node is a bucket of a hash table, pointing to the
+ * first element in its chain through its first pointer.
+ */
+struct l2t_entry {
+ u16 state; /* entry state */
+ u16 idx; /* entry index */
+ u32 addr[4]; /* next hop IP or IPv6 address */
+ int ifindex; /* neighbor's net_device's ifindex */
+ struct neighbour *neigh; /* associated neighbour */
+ struct l2t_entry *first; /* start of hash chain */
+ struct l2t_entry *next; /* next l2t_entry on chain */
+ struct sk_buff *arpq_head; /* queue of packets awaiting resolution */
+ struct sk_buff *arpq_tail;
+ spinlock_t lock;
+ atomic_t refcnt; /* entry reference count */
+ u16 hash; /* hash bucket the entry is on */
+ u16 vlan; /* VLAN TCI (id: bits 0-11, prio: 13-15 */
+ u8 v6; /* whether entry is for IPv6 */
+ u8 lport; /* associated offload logical interface */
+ u8 dmac[ETH_ALEN]; /* neighbour's MAC address */
+};
+
+typedef void (*arp_err_handler_t)(void *handle, struct sk_buff *skb);
+
+/*
+ * Callback stored in an skb to handle address resolution failure.
+ */
+struct l2t_skb_cb {
+ void *handle;
+ arp_err_handler_t arp_err_handler;
+};
+
+#define L2T_SKB_CB(skb) ((struct l2t_skb_cb *)(skb)->cb)
+
+static inline void t4_set_arp_err_handler(struct sk_buff *skb, void *handle,
+ arp_err_handler_t handler)
+{
+ L2T_SKB_CB(skb)->handle = handle;
+ L2T_SKB_CB(skb)->arp_err_handler = handler;
+}
+
+void cxgb4_l2t_release(struct l2t_entry *e);
+int cxgb4_l2t_send(struct net_device *dev, struct sk_buff *skb,
+ struct l2t_entry *e);
+struct l2t_entry *cxgb4_l2t_get(struct l2t_data *d, struct neighbour *neigh,
+ const struct net_device *physdev,
+ unsigned int priority);
+
+void t4_l2t_update(struct adapter *adap, struct neighbour *neigh);
+struct l2t_entry *t4_l2t_alloc_switching(struct l2t_data *d);
+int t4_l2t_set_switching(struct adapter *adap, struct l2t_entry *e, u16 vlan,
+ u8 port, u8 *eth_addr);
+struct l2t_data *t4_init_l2t(void);
+void do_l2t_write_rpl(struct adapter *p, const struct cpl_l2t_write_rpl *rpl);
+
+extern const struct file_operations t4_l2t_fops;
+#endif /* __CXGB4_L2T_H */
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/dma-mapping.h>
+#include <linux/jiffies.h>
+#include <net/ipv6.h>
+#include <net/tcp.h>
+#include "cxgb4.h"
+#include "t4_regs.h"
+#include "t4_msg.h"
+#include "t4fw_api.h"
+
+/*
+ * Rx buffer size. We use largish buffers if possible but settle for single
+ * pages under memory shortage.
+ */
+#if PAGE_SHIFT >= 16
+# define FL_PG_ORDER 0
+#else
+# define FL_PG_ORDER (16 - PAGE_SHIFT)
+#endif
+
+/* RX_PULL_LEN should be <= RX_COPY_THRES */
+#define RX_COPY_THRES 256
+#define RX_PULL_LEN 128
+
+/*
+ * Main body length for sk_buffs used for Rx Ethernet packets with fragments.
+ * Should be >= RX_PULL_LEN but possibly bigger to give pskb_may_pull some room.
+ */
+#define RX_PKT_SKB_LEN 512
+
+/* Ethernet header padding prepended to RX_PKTs */
+#define RX_PKT_PAD 2
+
+/*
+ * Max number of Tx descriptors we clean up at a time. Should be modest as
+ * freeing skbs isn't cheap and it happens while holding locks. We just need
+ * to free packets faster than they arrive, we eventually catch up and keep
+ * the amortized cost reasonable. Must be >= 2 * TXQ_STOP_THRES.
+ */
+#define MAX_TX_RECLAIM 16
+
+/*
+ * Max number of Rx buffers we replenish at a time. Again keep this modest,
+ * allocating buffers isn't cheap either.
+ */
+#define MAX_RX_REFILL 16U
+
+/*
+ * Period of the Rx queue check timer. This timer is infrequent as it has
+ * something to do only when the system experiences severe memory shortage.
+ */
+#define RX_QCHECK_PERIOD (HZ / 2)
+
+/*
+ * Period of the Tx queue check timer.
+ */
+#define TX_QCHECK_PERIOD (HZ / 2)
+
+/*
+ * Max number of Tx descriptors to be reclaimed by the Tx timer.
+ */
+#define MAX_TIMER_TX_RECLAIM 100
+
+/*
+ * Timer index used when backing off due to memory shortage.
+ */
+#define NOMEM_TMR_IDX (SGE_NTIMERS - 1)
+
+/*
+ * An FL with <= FL_STARVE_THRES buffers is starving and a periodic timer will
+ * attempt to refill it.
+ */
+#define FL_STARVE_THRES 4
+
+/*
+ * Suspend an Ethernet Tx queue with fewer available descriptors than this.
+ * This is the same as calc_tx_descs() for a TSO packet with
+ * nr_frags == MAX_SKB_FRAGS.
+ */
+#define ETHTXQ_STOP_THRES \
+ (1 + DIV_ROUND_UP((3 * MAX_SKB_FRAGS) / 2 + (MAX_SKB_FRAGS & 1), 8))
+
+/*
+ * Suspension threshold for non-Ethernet Tx queues. We require enough room
+ * for a full sized WR.
+ */
+#define TXQ_STOP_THRES (SGE_MAX_WR_LEN / sizeof(struct tx_desc))
+
+/*
+ * Max Tx descriptor space we allow for an Ethernet packet to be inlined
+ * into a WR.
+ */
+#define MAX_IMM_TX_PKT_LEN 128
+
+/*
+ * Max size of a WR sent through a control Tx queue.
+ */
+#define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN
+
+enum {
+ /* packet alignment in FL buffers */
+ FL_ALIGN = L1_CACHE_BYTES < 32 ? 32 : L1_CACHE_BYTES,
+ /* egress status entry size */
+ STAT_LEN = L1_CACHE_BYTES > 64 ? 128 : 64
+};
+
+struct tx_sw_desc { /* SW state per Tx descriptor */
+ struct sk_buff *skb;
+ struct ulptx_sgl *sgl;
+};
+
+struct rx_sw_desc { /* SW state per Rx descriptor */
+ struct page *page;
+ dma_addr_t dma_addr;
+};
+
+/*
+ * The low bits of rx_sw_desc.dma_addr have special meaning.
+ */
+enum {
+ RX_LARGE_BUF = 1 << 0, /* buffer is larger than PAGE_SIZE */
+ RX_UNMAPPED_BUF = 1 << 1, /* buffer is not mapped */
+};
+
+static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *d)
+{
+ return d->dma_addr & ~(dma_addr_t)(RX_LARGE_BUF | RX_UNMAPPED_BUF);
+}
+
+static inline bool is_buf_mapped(const struct rx_sw_desc *d)
+{
+ return !(d->dma_addr & RX_UNMAPPED_BUF);
+}
+
+/**
+ * txq_avail - return the number of available slots in a Tx queue
+ * @q: the Tx queue
+ *
+ * Returns the number of descriptors in a Tx queue available to write new
+ * packets.
+ */
+static inline unsigned int txq_avail(const struct sge_txq *q)
+{
+ return q->size - 1 - q->in_use;
+}
+
+/**
+ * fl_cap - return the capacity of a free-buffer list
+ * @fl: the FL
+ *
+ * Returns the capacity of a free-buffer list. The capacity is less than
+ * the size because one descriptor needs to be left unpopulated, otherwise
+ * HW will think the FL is empty.
+ */
+static inline unsigned int fl_cap(const struct sge_fl *fl)
+{
+ return fl->size - 8; /* 1 descriptor = 8 buffers */
+}
+
+static inline bool fl_starving(const struct sge_fl *fl)
+{
+ return fl->avail - fl->pend_cred <= FL_STARVE_THRES;
+}
+
+static int map_skb(struct device *dev, const struct sk_buff *skb,
+ dma_addr_t *addr)
+{
+ const skb_frag_t *fp, *end;
+ const struct skb_shared_info *si;
+
+ *addr = dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, *addr))
+ goto out_err;
+
+ si = skb_shinfo(skb);
+ end = &si->frags[si->nr_frags];
+
+ for (fp = si->frags; fp < end; fp++) {
+ *++addr = dma_map_page(dev, fp->page, fp->page_offset, fp->size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, *addr))
+ goto unwind;
+ }
+ return 0;
+
+unwind:
+ while (fp-- > si->frags)
+ dma_unmap_page(dev, *--addr, fp->size, DMA_TO_DEVICE);
+
+ dma_unmap_single(dev, addr[-1], skb_headlen(skb), DMA_TO_DEVICE);
+out_err:
+ return -ENOMEM;
+}
+
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+static void unmap_skb(struct device *dev, const struct sk_buff *skb,
+ const dma_addr_t *addr)
+{
+ const skb_frag_t *fp, *end;
+ const struct skb_shared_info *si;
+
+ dma_unmap_single(dev, *addr++, skb_headlen(skb), DMA_TO_DEVICE);
+
+ si = skb_shinfo(skb);
+ end = &si->frags[si->nr_frags];
+ for (fp = si->frags; fp < end; fp++)
+ dma_unmap_page(dev, *addr++, fp->size, DMA_TO_DEVICE);
+}
+
+/**
+ * deferred_unmap_destructor - unmap a packet when it is freed
+ * @skb: the packet
+ *
+ * This is the packet destructor used for Tx packets that need to remain
+ * mapped until they are freed rather than until their Tx descriptors are
+ * freed.
+ */
+static void deferred_unmap_destructor(struct sk_buff *skb)
+{
+ unmap_skb(skb->dev->dev.parent, skb, (dma_addr_t *)skb->head);
+}
+#endif
+
+static void unmap_sgl(struct device *dev, const struct sk_buff *skb,
+ const struct ulptx_sgl *sgl, const struct sge_txq *q)
+{
+ const struct ulptx_sge_pair *p;
+ unsigned int nfrags = skb_shinfo(skb)->nr_frags;
+
+ if (likely(skb_headlen(skb)))
+ dma_unmap_single(dev, be64_to_cpu(sgl->addr0), ntohl(sgl->len0),
+ DMA_TO_DEVICE);
+ else {
+ dma_unmap_page(dev, be64_to_cpu(sgl->addr0), ntohl(sgl->len0),
+ DMA_TO_DEVICE);
+ nfrags--;
+ }
+
+ /*
+ * the complexity below is because of the possibility of a wrap-around
+ * in the middle of an SGL
+ */
+ for (p = sgl->sge; nfrags >= 2; nfrags -= 2) {
+ if (likely((u8 *)(p + 1) <= (u8 *)q->stat)) {
+unmap: dma_unmap_page(dev, be64_to_cpu(p->addr[0]),
+ ntohl(p->len[0]), DMA_TO_DEVICE);
+ dma_unmap_page(dev, be64_to_cpu(p->addr[1]),
+ ntohl(p->len[1]), DMA_TO_DEVICE);
+ p++;
+ } else if ((u8 *)p == (u8 *)q->stat) {
+ p = (const struct ulptx_sge_pair *)q->desc;
+ goto unmap;
+ } else if ((u8 *)p + 8 == (u8 *)q->stat) {
+ const __be64 *addr = (const __be64 *)q->desc;
+
+ dma_unmap_page(dev, be64_to_cpu(addr[0]),
+ ntohl(p->len[0]), DMA_TO_DEVICE);
+ dma_unmap_page(dev, be64_to_cpu(addr[1]),
+ ntohl(p->len[1]), DMA_TO_DEVICE);
+ p = (const struct ulptx_sge_pair *)&addr[2];
+ } else {
+ const __be64 *addr = (const __be64 *)q->desc;
+
+ dma_unmap_page(dev, be64_to_cpu(p->addr[0]),
+ ntohl(p->len[0]), DMA_TO_DEVICE);
+ dma_unmap_page(dev, be64_to_cpu(addr[0]),
+ ntohl(p->len[1]), DMA_TO_DEVICE);
+ p = (const struct ulptx_sge_pair *)&addr[1];
+ }
+ }
+ if (nfrags) {
+ __be64 addr;
+
+ if ((u8 *)p == (u8 *)q->stat)
+ p = (const struct ulptx_sge_pair *)q->desc;
+ addr = (u8 *)p + 16 <= (u8 *)q->stat ? p->addr[0] :
+ *(const __be64 *)q->desc;
+ dma_unmap_page(dev, be64_to_cpu(addr), ntohl(p->len[0]),
+ DMA_TO_DEVICE);
+ }
+}
+
+/**
+ * free_tx_desc - reclaims Tx descriptors and their buffers
+ * @adapter: the adapter
+ * @q: the Tx queue to reclaim descriptors from
+ * @n: the number of descriptors to reclaim
+ * @unmap: whether the buffers should be unmapped for DMA
+ *
+ * Reclaims Tx descriptors from an SGE Tx queue and frees the associated
+ * Tx buffers. Called with the Tx queue lock held.
+ */
+static void free_tx_desc(struct adapter *adap, struct sge_txq *q,
+ unsigned int n, bool unmap)
+{
+ struct tx_sw_desc *d;
+ unsigned int cidx = q->cidx;
+ struct device *dev = adap->pdev_dev;
+
+ d = &q->sdesc[cidx];
+ while (n--) {
+ if (d->skb) { /* an SGL is present */
+ if (unmap)
+ unmap_sgl(dev, d->skb, d->sgl, q);
+ kfree_skb(d->skb);
+ d->skb = NULL;
+ }
+ ++d;
+ if (++cidx == q->size) {
+ cidx = 0;
+ d = q->sdesc;
+ }
+ }
+ q->cidx = cidx;
+}
+
+/*
+ * Return the number of reclaimable descriptors in a Tx queue.
+ */
+static inline int reclaimable(const struct sge_txq *q)
+{
+ int hw_cidx = ntohs(q->stat->cidx);
+ hw_cidx -= q->cidx;
+ return hw_cidx < 0 ? hw_cidx + q->size : hw_cidx;
+}
+
+/**
+ * reclaim_completed_tx - reclaims completed Tx descriptors
+ * @adap: the adapter
+ * @q: the Tx queue to reclaim completed descriptors from
+ * @unmap: whether the buffers should be unmapped for DMA
+ *
+ * Reclaims Tx descriptors that the SGE has indicated it has processed,
+ * and frees the associated buffers if possible. Called with the Tx
+ * queue locked.
+ */
+static inline void reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
+ bool unmap)
+{
+ int avail = reclaimable(q);
+
+ if (avail) {
+ /*
+ * Limit the amount of clean up work we do at a time to keep
+ * the Tx lock hold time O(1).
+ */
+ if (avail > MAX_TX_RECLAIM)
+ avail = MAX_TX_RECLAIM;
+
+ free_tx_desc(adap, q, avail, unmap);
+ q->in_use -= avail;
+ }
+}
+
+static inline int get_buf_size(const struct rx_sw_desc *d)
+{
+#if FL_PG_ORDER > 0
+ return (d->dma_addr & RX_LARGE_BUF) ? (PAGE_SIZE << FL_PG_ORDER) :
+ PAGE_SIZE;
+#else
+ return PAGE_SIZE;
+#endif
+}
+
+/**
+ * free_rx_bufs - free the Rx buffers on an SGE free list
+ * @adap: the adapter
+ * @q: the SGE free list to free buffers from
+ * @n: how many buffers to free
+ *
+ * Release the next @n buffers on an SGE free-buffer Rx queue. The
+ * buffers must be made inaccessible to HW before calling this function.
+ */
+static void free_rx_bufs(struct adapter *adap, struct sge_fl *q, int n)
+{
+ while (n--) {
+ struct rx_sw_desc *d = &q->sdesc[q->cidx];
+
+ if (is_buf_mapped(d))
+ dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
+ get_buf_size(d), PCI_DMA_FROMDEVICE);
+ put_page(d->page);
+ d->page = NULL;
+ if (++q->cidx == q->size)
+ q->cidx = 0;
+ q->avail--;
+ }
+}
+
+/**
+ * unmap_rx_buf - unmap the current Rx buffer on an SGE free list
+ * @adap: the adapter
+ * @q: the SGE free list
+ *
+ * Unmap the current buffer on an SGE free-buffer Rx queue. The
+ * buffer must be made inaccessible to HW before calling this function.
+ *
+ * This is similar to @free_rx_bufs above but does not free the buffer.
+ * Do note that the FL still loses any further access to the buffer.
+ */
+static void unmap_rx_buf(struct adapter *adap, struct sge_fl *q)
+{
+ struct rx_sw_desc *d = &q->sdesc[q->cidx];
+
+ if (is_buf_mapped(d))
+ dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
+ get_buf_size(d), PCI_DMA_FROMDEVICE);
+ d->page = NULL;
+ if (++q->cidx == q->size)
+ q->cidx = 0;
+ q->avail--;
+}
+
+static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
+{
+ if (q->pend_cred >= 8) {
+ wmb();
+ t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL), DBPRIO |
+ QID(q->cntxt_id) | PIDX(q->pend_cred / 8));
+ q->pend_cred &= 7;
+ }
+}
+
+static inline void set_rx_sw_desc(struct rx_sw_desc *sd, struct page *pg,
+ dma_addr_t mapping)
+{
+ sd->page = pg;
+ sd->dma_addr = mapping; /* includes size low bits */
+}
+
+/**
+ * refill_fl - refill an SGE Rx buffer ring
+ * @adap: the adapter
+ * @q: the ring to refill
+ * @n: the number of new buffers to allocate
+ * @gfp: the gfp flags for the allocations
+ *
+ * (Re)populate an SGE free-buffer queue with up to @n new packet buffers,
+ * allocated with the supplied gfp flags. The caller must assure that
+ * @n does not exceed the queue's capacity. If afterwards the queue is
+ * found critically low mark it as starving in the bitmap of starving FLs.
+ *
+ * Returns the number of buffers allocated.
+ */
+static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
+ gfp_t gfp)
+{
+ struct page *pg;
+ dma_addr_t mapping;
+ unsigned int cred = q->avail;
+ __be64 *d = &q->desc[q->pidx];
+ struct rx_sw_desc *sd = &q->sdesc[q->pidx];
+
+ gfp |= __GFP_NOWARN; /* failures are expected */
+
+#if FL_PG_ORDER > 0
+ /*
+ * Prefer large buffers
+ */
+ while (n) {
+ pg = alloc_pages(gfp | __GFP_COMP, FL_PG_ORDER);
+ if (unlikely(!pg)) {
+ q->large_alloc_failed++;
+ break; /* fall back to single pages */
+ }
+
+ mapping = dma_map_page(adap->pdev_dev, pg, 0,
+ PAGE_SIZE << FL_PG_ORDER,
+ PCI_DMA_FROMDEVICE);
+ if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) {
+ __free_pages(pg, FL_PG_ORDER);
+ goto out; /* do not try small pages for this error */
+ }
+ mapping |= RX_LARGE_BUF;
+ *d++ = cpu_to_be64(mapping);
+
+ set_rx_sw_desc(sd, pg, mapping);
+ sd++;
+
+ q->avail++;
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ sd = q->sdesc;
+ d = q->desc;
+ }
+ n--;
+ }
+#endif
+
+ while (n--) {
+ pg = __netdev_alloc_page(adap->port[0], gfp);
+ if (unlikely(!pg)) {
+ q->alloc_failed++;
+ break;
+ }
+
+ mapping = dma_map_page(adap->pdev_dev, pg, 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) {
+ netdev_free_page(adap->port[0], pg);
+ goto out;
+ }
+ *d++ = cpu_to_be64(mapping);
+
+ set_rx_sw_desc(sd, pg, mapping);
+ sd++;
+
+ q->avail++;
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ sd = q->sdesc;
+ d = q->desc;
+ }
+ }
+
+out: cred = q->avail - cred;
+ q->pend_cred += cred;
+ ring_fl_db(adap, q);
+
+ if (unlikely(fl_starving(q))) {
+ smp_wmb();
+ set_bit(q->cntxt_id, adap->sge.starving_fl);
+ }
+
+ return cred;
+}
+
+static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
+{
+ refill_fl(adap, fl, min(MAX_RX_REFILL, fl_cap(fl) - fl->avail),
+ GFP_ATOMIC);
+}
+
+/**
+ * alloc_ring - allocate resources for an SGE descriptor ring
+ * @dev: the PCI device's core device
+ * @nelem: the number of descriptors
+ * @elem_size: the size of each descriptor
+ * @sw_size: the size of the SW state associated with each ring element
+ * @phys: the physical address of the allocated ring
+ * @metadata: address of the array holding the SW state for the ring
+ * @stat_size: extra space in HW ring for status information
+ *
+ * Allocates resources for an SGE descriptor ring, such as Tx queues,
+ * free buffer lists, or response queues. Each SGE ring requires
+ * space for its HW descriptors plus, optionally, space for the SW state
+ * associated with each HW entry (the metadata). The function returns
+ * three values: the virtual address for the HW ring (the return value
+ * of the function), the bus address of the HW ring, and the address
+ * of the SW ring.
+ */
+static void *alloc_ring(struct device *dev, size_t nelem, size_t elem_size,
+ size_t sw_size, dma_addr_t *phys, void *metadata,
+ size_t stat_size)
+{
+ size_t len = nelem * elem_size + stat_size;
+ void *s = NULL;
+ void *p = dma_alloc_coherent(dev, len, phys, GFP_KERNEL);
+
+ if (!p)
+ return NULL;
+ if (sw_size) {
+ s = kcalloc(nelem, sw_size, GFP_KERNEL);
+
+ if (!s) {
+ dma_free_coherent(dev, len, p, *phys);
+ return NULL;
+ }
+ }
+ if (metadata)
+ *(void **)metadata = s;
+ memset(p, 0, len);
+ return p;
+}
+
+/**
+ * sgl_len - calculates the size of an SGL of the given capacity
+ * @n: the number of SGL entries
+ *
+ * Calculates the number of flits needed for a scatter/gather list that
+ * can hold the given number of entries.
+ */
+static inline unsigned int sgl_len(unsigned int n)
+{
+ n--;
+ return (3 * n) / 2 + (n & 1) + 2;
+}
+
+/**
+ * flits_to_desc - returns the num of Tx descriptors for the given flits
+ * @n: the number of flits
+ *
+ * Returns the number of Tx descriptors needed for the supplied number
+ * of flits.
+ */
+static inline unsigned int flits_to_desc(unsigned int n)
+{
+ BUG_ON(n > SGE_MAX_WR_LEN / 8);
+ return DIV_ROUND_UP(n, 8);
+}
+
+/**
+ * is_eth_imm - can an Ethernet packet be sent as immediate data?
+ * @skb: the packet
+ *
+ * Returns whether an Ethernet packet is small enough to fit as
+ * immediate data.
+ */
+static inline int is_eth_imm(const struct sk_buff *skb)
+{
+ return skb->len <= MAX_IMM_TX_PKT_LEN - sizeof(struct cpl_tx_pkt);
+}
+
+/**
+ * calc_tx_flits - calculate the number of flits for a packet Tx WR
+ * @skb: the packet
+ *
+ * Returns the number of flits needed for a Tx WR for the given Ethernet
+ * packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int calc_tx_flits(const struct sk_buff *skb)
+{
+ unsigned int flits;
+
+ if (is_eth_imm(skb))
+ return DIV_ROUND_UP(skb->len + sizeof(struct cpl_tx_pkt), 8);
+
+ flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 4;
+ if (skb_shinfo(skb)->gso_size)
+ flits += 2;
+ return flits;
+}
+
+/**
+ * calc_tx_descs - calculate the number of Tx descriptors for a packet
+ * @skb: the packet
+ *
+ * Returns the number of Tx descriptors needed for the given Ethernet
+ * packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
+{
+ return flits_to_desc(calc_tx_flits(skb));
+}
+
+/**
+ * write_sgl - populate a scatter/gather list for a packet
+ * @skb: the packet
+ * @q: the Tx queue we are writing into
+ * @sgl: starting location for writing the SGL
+ * @end: points right after the end of the SGL
+ * @start: start offset into skb main-body data to include in the SGL
+ * @addr: the list of bus addresses for the SGL elements
+ *
+ * Generates a gather list for the buffers that make up a packet.
+ * The caller must provide adequate space for the SGL that will be written.
+ * The SGL includes all of the packet's page fragments and the data in its
+ * main body except for the first @start bytes. @sgl must be 16-byte
+ * aligned and within a Tx descriptor with available space. @end points
+ * right after the end of the SGL but does not account for any potential
+ * wrap around, i.e., @end > @sgl.
+ */
+static void write_sgl(const struct sk_buff *skb, struct sge_txq *q,
+ struct ulptx_sgl *sgl, u64 *end, unsigned int start,
+ const dma_addr_t *addr)
+{
+ unsigned int i, len;
+ struct ulptx_sge_pair *to;
+ const struct skb_shared_info *si = skb_shinfo(skb);
+ unsigned int nfrags = si->nr_frags;
+ struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1];
+
+ len = skb_headlen(skb) - start;
+ if (likely(len)) {
+ sgl->len0 = htonl(len);
+ sgl->addr0 = cpu_to_be64(addr[0] + start);
+ nfrags++;
+ } else {
+ sgl->len0 = htonl(si->frags[0].size);
+ sgl->addr0 = cpu_to_be64(addr[1]);
+ }
+
+ sgl->cmd_nsge = htonl(ULPTX_CMD(ULP_TX_SC_DSGL) | ULPTX_NSGE(nfrags));
+ if (likely(--nfrags == 0))
+ return;
+ /*
+ * Most of the complexity below deals with the possibility we hit the
+ * end of the queue in the middle of writing the SGL. For this case
+ * only we create the SGL in a temporary buffer and then copy it.
+ */
+ to = (u8 *)end > (u8 *)q->stat ? buf : sgl->sge;
+
+ for (i = (nfrags != si->nr_frags); nfrags >= 2; nfrags -= 2, to++) {
+ to->len[0] = cpu_to_be32(si->frags[i].size);
+ to->len[1] = cpu_to_be32(si->frags[++i].size);
+ to->addr[0] = cpu_to_be64(addr[i]);
+ to->addr[1] = cpu_to_be64(addr[++i]);
+ }
+ if (nfrags) {
+ to->len[0] = cpu_to_be32(si->frags[i].size);
+ to->len[1] = cpu_to_be32(0);
+ to->addr[0] = cpu_to_be64(addr[i + 1]);
+ }
+ if (unlikely((u8 *)end > (u8 *)q->stat)) {
+ unsigned int part0 = (u8 *)q->stat - (u8 *)sgl->sge, part1;
+
+ if (likely(part0))
+ memcpy(sgl->sge, buf, part0);
+ part1 = (u8 *)end - (u8 *)q->stat;
+ memcpy(q->desc, (u8 *)buf + part0, part1);
+ end = (void *)q->desc + part1;
+ }
+ if ((uintptr_t)end & 8) /* 0-pad to multiple of 16 */
+ *(u64 *)end = 0;
+}
+
+/**
+ * ring_tx_db - check and potentially ring a Tx queue's doorbell
+ * @adap: the adapter
+ * @q: the Tx queue
+ * @n: number of new descriptors to give to HW
+ *
+ * Ring the doorbel for a Tx queue.
+ */
+static inline void ring_tx_db(struct adapter *adap, struct sge_txq *q, int n)
+{
+ wmb(); /* write descriptors before telling HW */
+ t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL),
+ QID(q->cntxt_id) | PIDX(n));
+}
+
+/**
+ * inline_tx_skb - inline a packet's data into Tx descriptors
+ * @skb: the packet
+ * @q: the Tx queue where the packet will be inlined
+ * @pos: starting position in the Tx queue where to inline the packet
+ *
+ * Inline a packet's contents directly into Tx descriptors, starting at
+ * the given position within the Tx DMA ring.
+ * Most of the complexity of this operation is dealing with wrap arounds
+ * in the middle of the packet we want to inline.
+ */
+static void inline_tx_skb(const struct sk_buff *skb, const struct sge_txq *q,
+ void *pos)
+{
+ u64 *p;
+ int left = (void *)q->stat - pos;
+
+ if (likely(skb->len <= left)) {
+ if (likely(!skb->data_len))
+ skb_copy_from_linear_data(skb, pos, skb->len);
+ else
+ skb_copy_bits(skb, 0, pos, skb->len);
+ pos += skb->len;
+ } else {
+ skb_copy_bits(skb, 0, pos, left);
+ skb_copy_bits(skb, left, q->desc, skb->len - left);
+ pos = (void *)q->desc + (skb->len - left);
+ }
+
+ /* 0-pad to multiple of 16 */
+ p = PTR_ALIGN(pos, 8);
+ if ((uintptr_t)p & 8)
+ *p = 0;
+}
+
+/*
+ * Figure out what HW csum a packet wants and return the appropriate control
+ * bits.
+ */
+static u64 hwcsum(const struct sk_buff *skb)
+{
+ int csum_type;
+ const struct iphdr *iph = ip_hdr(skb);
+
+ if (iph->version == 4) {
+ if (iph->protocol == IPPROTO_TCP)
+ csum_type = TX_CSUM_TCPIP;
+ else if (iph->protocol == IPPROTO_UDP)
+ csum_type = TX_CSUM_UDPIP;
+ else {
+nocsum: /*
+ * unknown protocol, disable HW csum
+ * and hope a bad packet is detected
+ */
+ return TXPKT_L4CSUM_DIS;
+ }
+ } else {
+ /*
+ * this doesn't work with extension headers
+ */
+ const struct ipv6hdr *ip6h = (const struct ipv6hdr *)iph;
+
+ if (ip6h->nexthdr == IPPROTO_TCP)
+ csum_type = TX_CSUM_TCPIP6;
+ else if (ip6h->nexthdr == IPPROTO_UDP)
+ csum_type = TX_CSUM_UDPIP6;
+ else
+ goto nocsum;
+ }
+
+ if (likely(csum_type >= TX_CSUM_TCPIP))
+ return TXPKT_CSUM_TYPE(csum_type) |
+ TXPKT_IPHDR_LEN(skb_network_header_len(skb)) |
+ TXPKT_ETHHDR_LEN(skb_network_offset(skb) - ETH_HLEN);
+ else {
+ int start = skb_transport_offset(skb);
+
+ return TXPKT_CSUM_TYPE(csum_type) | TXPKT_CSUM_START(start) |
+ TXPKT_CSUM_LOC(start + skb->csum_offset);
+ }
+}
+
+static void eth_txq_stop(struct sge_eth_txq *q)
+{
+ netif_tx_stop_queue(q->txq);
+ q->q.stops++;
+}
+
+static inline void txq_advance(struct sge_txq *q, unsigned int n)
+{
+ q->in_use += n;
+ q->pidx += n;
+ if (q->pidx >= q->size)
+ q->pidx -= q->size;
+}
+
+/**
+ * t4_eth_xmit - add a packet to an Ethernet Tx queue
+ * @skb: the packet
+ * @dev: the egress net device
+ *
+ * Add a packet to an SGE Ethernet Tx queue. Runs with softirqs disabled.
+ */
+netdev_tx_t t4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ u32 wr_mid;
+ u64 cntrl, *end;
+ int qidx, credits;
+ unsigned int flits, ndesc;
+ struct adapter *adap;
+ struct sge_eth_txq *q;
+ const struct port_info *pi;
+ struct fw_eth_tx_pkt_wr *wr;
+ struct cpl_tx_pkt_core *cpl;
+ const struct skb_shared_info *ssi;
+ dma_addr_t addr[MAX_SKB_FRAGS + 1];
+
+ /*
+ * The chip min packet length is 10 octets but play safe and reject
+ * anything shorter than an Ethernet header.
+ */
+ if (unlikely(skb->len < ETH_HLEN)) {
+out_free: dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ pi = netdev_priv(dev);
+ adap = pi->adapter;
+ qidx = skb_get_queue_mapping(skb);
+ q = &adap->sge.ethtxq[qidx + pi->first_qset];
+
+ reclaim_completed_tx(adap, &q->q, true);
+
+ flits = calc_tx_flits(skb);
+ ndesc = flits_to_desc(flits);
+ credits = txq_avail(&q->q) - ndesc;
+
+ if (unlikely(credits < 0)) {
+ eth_txq_stop(q);
+ dev_err(adap->pdev_dev,
+ "%s: Tx ring %u full while queue awake!\n",
+ dev->name, qidx);
+ return NETDEV_TX_BUSY;
+ }
+
+ if (!is_eth_imm(skb) &&
+ unlikely(map_skb(adap->pdev_dev, skb, addr) < 0)) {
+ q->mapping_err++;
+ goto out_free;
+ }
+
+ wr_mid = FW_WR_LEN16(DIV_ROUND_UP(flits, 2));
+ if (unlikely(credits < ETHTXQ_STOP_THRES)) {
+ eth_txq_stop(q);
+ wr_mid |= FW_WR_EQUEQ | FW_WR_EQUIQ;
+ }
+
+ wr = (void *)&q->q.desc[q->q.pidx];
+ wr->equiq_to_len16 = htonl(wr_mid);
+ wr->r3 = cpu_to_be64(0);
+ end = (u64 *)wr + flits;
+
+ ssi = skb_shinfo(skb);
+ if (ssi->gso_size) {
+ struct cpl_tx_pkt_lso *lso = (void *)wr;
+ bool v6 = (ssi->gso_type & SKB_GSO_TCPV6) != 0;
+ int l3hdr_len = skb_network_header_len(skb);
+ int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
+
+ wr->op_immdlen = htonl(FW_WR_OP(FW_ETH_TX_PKT_WR) |
+ FW_WR_IMMDLEN(sizeof(*lso)));
+ lso->lso_ctrl = htonl(LSO_OPCODE(CPL_TX_PKT_LSO) |
+ LSO_FIRST_SLICE | LSO_LAST_SLICE |
+ LSO_IPV6(v6) |
+ LSO_ETHHDR_LEN(eth_xtra_len / 4) |
+ LSO_IPHDR_LEN(l3hdr_len / 4) |
+ LSO_TCPHDR_LEN(tcp_hdr(skb)->doff));
+ lso->ipid_ofst = htons(0);
+ lso->mss = htons(ssi->gso_size);
+ lso->seqno_offset = htonl(0);
+ lso->len = htonl(skb->len);
+ cpl = (void *)(lso + 1);
+ cntrl = TXPKT_CSUM_TYPE(v6 ? TX_CSUM_TCPIP6 : TX_CSUM_TCPIP) |
+ TXPKT_IPHDR_LEN(l3hdr_len) |
+ TXPKT_ETHHDR_LEN(eth_xtra_len);
+ q->tso++;
+ q->tx_cso += ssi->gso_segs;
+ } else {
+ int len;
+
+ len = is_eth_imm(skb) ? skb->len + sizeof(*cpl) : sizeof(*cpl);
+ wr->op_immdlen = htonl(FW_WR_OP(FW_ETH_TX_PKT_WR) |
+ FW_WR_IMMDLEN(len));
+ cpl = (void *)(wr + 1);
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ cntrl = hwcsum(skb) | TXPKT_IPCSUM_DIS;
+ q->tx_cso++;
+ } else
+ cntrl = TXPKT_L4CSUM_DIS | TXPKT_IPCSUM_DIS;
+ }
+
+ if (vlan_tx_tag_present(skb)) {
+ q->vlan_ins++;
+ cntrl |= TXPKT_VLAN_VLD | TXPKT_VLAN(vlan_tx_tag_get(skb));
+ }
+
+ cpl->ctrl0 = htonl(TXPKT_OPCODE(CPL_TX_PKT_XT) |
+ TXPKT_INTF(pi->tx_chan) | TXPKT_PF(0));
+ cpl->pack = htons(0);
+ cpl->len = htons(skb->len);
+ cpl->ctrl1 = cpu_to_be64(cntrl);
+
+ if (is_eth_imm(skb)) {
+ inline_tx_skb(skb, &q->q, cpl + 1);
+ dev_kfree_skb(skb);
+ } else {
+ int last_desc;
+
+ write_sgl(skb, &q->q, (struct ulptx_sgl *)(cpl + 1), end, 0,
+ addr);
+ skb_orphan(skb);
+
+ last_desc = q->q.pidx + ndesc - 1;
+ if (last_desc >= q->q.size)
+ last_desc -= q->q.size;
+ q->q.sdesc[last_desc].skb = skb;
+ q->q.sdesc[last_desc].sgl = (struct ulptx_sgl *)(cpl + 1);
+ }
+
+ txq_advance(&q->q, ndesc);
+
+ ring_tx_db(adap, &q->q, ndesc);
+ return NETDEV_TX_OK;
+}
+
+/**
+ * reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
+ * @q: the SGE control Tx queue
+ *
+ * This is a variant of reclaim_completed_tx() that is used for Tx queues
+ * that send only immediate data (presently just the control queues) and
+ * thus do not have any sk_buffs to release.
+ */
+static inline void reclaim_completed_tx_imm(struct sge_txq *q)
+{
+ int hw_cidx = ntohs(q->stat->cidx);
+ int reclaim = hw_cidx - q->cidx;
+
+ if (reclaim < 0)
+ reclaim += q->size;
+
+ q->in_use -= reclaim;
+ q->cidx = hw_cidx;
+}
+
+/**
+ * is_imm - check whether a packet can be sent as immediate data
+ * @skb: the packet
+ *
+ * Returns true if a packet can be sent as a WR with immediate data.
+ */
+static inline int is_imm(const struct sk_buff *skb)
+{
+ return skb->len <= MAX_CTRL_WR_LEN;
+}
+
+/**
+ * ctrlq_check_stop - check if a control queue is full and should stop
+ * @q: the queue
+ * @wr: most recent WR written to the queue
+ *
+ * Check if a control queue has become full and should be stopped.
+ * We clean up control queue descriptors very lazily, only when we are out.
+ * If the queue is still full after reclaiming any completed descriptors
+ * we suspend it and have the last WR wake it up.
+ */
+static void ctrlq_check_stop(struct sge_ctrl_txq *q, struct fw_wr_hdr *wr)
+{
+ reclaim_completed_tx_imm(&q->q);
+ if (unlikely(txq_avail(&q->q) < TXQ_STOP_THRES)) {
+ wr->lo |= htonl(FW_WR_EQUEQ | FW_WR_EQUIQ);
+ q->q.stops++;
+ q->full = 1;
+ }
+}
+
+/**
+ * ctrl_xmit - send a packet through an SGE control Tx queue
+ * @q: the control queue
+ * @skb: the packet
+ *
+ * Send a packet through an SGE control Tx queue. Packets sent through
+ * a control queue must fit entirely as immediate data.
+ */
+static int ctrl_xmit(struct sge_ctrl_txq *q, struct sk_buff *skb)
+{
+ unsigned int ndesc;
+ struct fw_wr_hdr *wr;
+
+ if (unlikely(!is_imm(skb))) {
+ WARN_ON(1);
+ dev_kfree_skb(skb);
+ return NET_XMIT_DROP;
+ }
+
+ ndesc = DIV_ROUND_UP(skb->len, sizeof(struct tx_desc));
+ spin_lock(&q->sendq.lock);
+
+ if (unlikely(q->full)) {
+ skb->priority = ndesc; /* save for restart */
+ __skb_queue_tail(&q->sendq, skb);
+ spin_unlock(&q->sendq.lock);
+ return NET_XMIT_CN;
+ }
+
+ wr = (struct fw_wr_hdr *)&q->q.desc[q->q.pidx];
+ inline_tx_skb(skb, &q->q, wr);
+
+ txq_advance(&q->q, ndesc);
+ if (unlikely(txq_avail(&q->q) < TXQ_STOP_THRES))
+ ctrlq_check_stop(q, wr);
+
+ ring_tx_db(q->adap, &q->q, ndesc);
+ spin_unlock(&q->sendq.lock);
+
+ kfree_skb(skb);
+ return NET_XMIT_SUCCESS;
+}
+
+/**
+ * restart_ctrlq - restart a suspended control queue
+ * @data: the control queue to restart
+ *
+ * Resumes transmission on a suspended Tx control queue.
+ */
+static void restart_ctrlq(unsigned long data)
+{
+ struct sk_buff *skb;
+ unsigned int written = 0;
+ struct sge_ctrl_txq *q = (struct sge_ctrl_txq *)data;
+
+ spin_lock(&q->sendq.lock);
+ reclaim_completed_tx_imm(&q->q);
+ BUG_ON(txq_avail(&q->q) < TXQ_STOP_THRES); /* q should be empty */
+
+ while ((skb = __skb_dequeue(&q->sendq)) != NULL) {
+ struct fw_wr_hdr *wr;
+ unsigned int ndesc = skb->priority; /* previously saved */
+
+ /*
+ * Write descriptors and free skbs outside the lock to limit
+ * wait times. q->full is still set so new skbs will be queued.
+ */
+ spin_unlock(&q->sendq.lock);
+
+ wr = (struct fw_wr_hdr *)&q->q.desc[q->q.pidx];
+ inline_tx_skb(skb, &q->q, wr);
+ kfree_skb(skb);
+
+ written += ndesc;
+ txq_advance(&q->q, ndesc);
+ if (unlikely(txq_avail(&q->q) < TXQ_STOP_THRES)) {
+ unsigned long old = q->q.stops;
+
+ ctrlq_check_stop(q, wr);
+ if (q->q.stops != old) { /* suspended anew */
+ spin_lock(&q->sendq.lock);
+ goto ringdb;
+ }
+ }
+ if (written > 16) {
+ ring_tx_db(q->adap, &q->q, written);
+ written = 0;
+ }
+ spin_lock(&q->sendq.lock);
+ }
+ q->full = 0;
+ringdb: if (written)
+ ring_tx_db(q->adap, &q->q, written);
+ spin_unlock(&q->sendq.lock);
+}
+
+/**
+ * t4_mgmt_tx - send a management message
+ * @adap: the adapter
+ * @skb: the packet containing the management message
+ *
+ * Send a management message through control queue 0.
+ */
+int t4_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
+{
+ int ret;
+
+ local_bh_disable();
+ ret = ctrl_xmit(&adap->sge.ctrlq[0], skb);
+ local_bh_enable();
+ return ret;
+}
+
+/**
+ * is_ofld_imm - check whether a packet can be sent as immediate data
+ * @skb: the packet
+ *
+ * Returns true if a packet can be sent as an offload WR with immediate
+ * data. We currently use the same limit as for Ethernet packets.
+ */
+static inline int is_ofld_imm(const struct sk_buff *skb)
+{
+ return skb->len <= MAX_IMM_TX_PKT_LEN;
+}
+
+/**
+ * calc_tx_flits_ofld - calculate # of flits for an offload packet
+ * @skb: the packet
+ *
+ * Returns the number of flits needed for the given offload packet.
+ * These packets are already fully constructed and no additional headers
+ * will be added.
+ */
+static inline unsigned int calc_tx_flits_ofld(const struct sk_buff *skb)
+{
+ unsigned int flits, cnt;
+
+ if (is_ofld_imm(skb))
+ return DIV_ROUND_UP(skb->len, 8);
+
+ flits = skb_transport_offset(skb) / 8U; /* headers */
+ cnt = skb_shinfo(skb)->nr_frags;
+ if (skb->tail != skb->transport_header)
+ cnt++;
+ return flits + sgl_len(cnt);
+}
+
+/**
+ * txq_stop_maperr - stop a Tx queue due to I/O MMU exhaustion
+ * @adap: the adapter
+ * @q: the queue to stop
+ *
+ * Mark a Tx queue stopped due to I/O MMU exhaustion and resulting
+ * inability to map packets. A periodic timer attempts to restart
+ * queues so marked.
+ */
+static void txq_stop_maperr(struct sge_ofld_txq *q)
+{
+ q->mapping_err++;
+ q->q.stops++;
+ set_bit(q->q.cntxt_id, q->adap->sge.txq_maperr);
+}
+
+/**
+ * ofldtxq_stop - stop an offload Tx queue that has become full
+ * @q: the queue to stop
+ * @skb: the packet causing the queue to become full
+ *
+ * Stops an offload Tx queue that has become full and modifies the packet
+ * being written to request a wakeup.
+ */
+static void ofldtxq_stop(struct sge_ofld_txq *q, struct sk_buff *skb)
+{
+ struct fw_wr_hdr *wr = (struct fw_wr_hdr *)skb->data;
+
+ wr->lo |= htonl(FW_WR_EQUEQ | FW_WR_EQUIQ);
+ q->q.stops++;
+ q->full = 1;
+}
+
+/**
+ * service_ofldq - restart a suspended offload queue
+ * @q: the offload queue
+ *
+ * Services an offload Tx queue by moving packets from its packet queue
+ * to the HW Tx ring. The function starts and ends with the queue locked.
+ */
+static void service_ofldq(struct sge_ofld_txq *q)
+{
+ u64 *pos;
+ int credits;
+ struct sk_buff *skb;
+ unsigned int written = 0;
+ unsigned int flits, ndesc;
+
+ while ((skb = skb_peek(&q->sendq)) != NULL && !q->full) {
+ /*
+ * We drop the lock but leave skb on sendq, thus retaining
+ * exclusive access to the state of the queue.
+ */
+ spin_unlock(&q->sendq.lock);
+
+ reclaim_completed_tx(q->adap, &q->q, false);
+
+ flits = skb->priority; /* previously saved */
+ ndesc = flits_to_desc(flits);
+ credits = txq_avail(&q->q) - ndesc;
+ BUG_ON(credits < 0);
+ if (unlikely(credits < TXQ_STOP_THRES))
+ ofldtxq_stop(q, skb);
+
+ pos = (u64 *)&q->q.desc[q->q.pidx];
+ if (is_ofld_imm(skb))
+ inline_tx_skb(skb, &q->q, pos);
+ else if (map_skb(q->adap->pdev_dev, skb,
+ (dma_addr_t *)skb->head)) {
+ txq_stop_maperr(q);
+ spin_lock(&q->sendq.lock);
+ break;
+ } else {
+ int last_desc, hdr_len = skb_transport_offset(skb);
+
+ memcpy(pos, skb->data, hdr_len);
+ write_sgl(skb, &q->q, (void *)pos + hdr_len,
+ pos + flits, hdr_len,
+ (dma_addr_t *)skb->head);
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+ skb->dev = q->adap->port[0];
+ skb->destructor = deferred_unmap_destructor;
+#endif
+ last_desc = q->q.pidx + ndesc - 1;
+ if (last_desc >= q->q.size)
+ last_desc -= q->q.size;
+ q->q.sdesc[last_desc].skb = skb;
+ }
+
+ txq_advance(&q->q, ndesc);
+ written += ndesc;
+ if (unlikely(written > 32)) {
+ ring_tx_db(q->adap, &q->q, written);
+ written = 0;
+ }
+
+ spin_lock(&q->sendq.lock);
+ __skb_unlink(skb, &q->sendq);
+ if (is_ofld_imm(skb))
+ kfree_skb(skb);
+ }
+ if (likely(written))
+ ring_tx_db(q->adap, &q->q, written);
+}
+
+/**
+ * ofld_xmit - send a packet through an offload queue
+ * @q: the Tx offload queue
+ * @skb: the packet
+ *
+ * Send an offload packet through an SGE offload queue.
+ */
+static int ofld_xmit(struct sge_ofld_txq *q, struct sk_buff *skb)
+{
+ skb->priority = calc_tx_flits_ofld(skb); /* save for restart */
+ spin_lock(&q->sendq.lock);
+ __skb_queue_tail(&q->sendq, skb);
+ if (q->sendq.qlen == 1)
+ service_ofldq(q);
+ spin_unlock(&q->sendq.lock);
+ return NET_XMIT_SUCCESS;
+}
+
+/**
+ * restart_ofldq - restart a suspended offload queue
+ * @data: the offload queue to restart
+ *
+ * Resumes transmission on a suspended Tx offload queue.
+ */
+static void restart_ofldq(unsigned long data)
+{
+ struct sge_ofld_txq *q = (struct sge_ofld_txq *)data;
+
+ spin_lock(&q->sendq.lock);
+ q->full = 0; /* the queue actually is completely empty now */
+ service_ofldq(q);
+ spin_unlock(&q->sendq.lock);
+}
+
+/**
+ * skb_txq - return the Tx queue an offload packet should use
+ * @skb: the packet
+ *
+ * Returns the Tx queue an offload packet should use as indicated by bits
+ * 1-15 in the packet's queue_mapping.
+ */
+static inline unsigned int skb_txq(const struct sk_buff *skb)
+{
+ return skb->queue_mapping >> 1;
+}
+
+/**
+ * is_ctrl_pkt - return whether an offload packet is a control packet
+ * @skb: the packet
+ *
+ * Returns whether an offload packet should use an OFLD or a CTRL
+ * Tx queue as indicated by bit 0 in the packet's queue_mapping.
+ */
+static inline unsigned int is_ctrl_pkt(const struct sk_buff *skb)
+{
+ return skb->queue_mapping & 1;
+}
+
+static inline int ofld_send(struct adapter *adap, struct sk_buff *skb)
+{
+ unsigned int idx = skb_txq(skb);
+
+ if (unlikely(is_ctrl_pkt(skb)))
+ return ctrl_xmit(&adap->sge.ctrlq[idx], skb);
+ return ofld_xmit(&adap->sge.ofldtxq[idx], skb);
+}
+
+/**
+ * t4_ofld_send - send an offload packet
+ * @adap: the adapter
+ * @skb: the packet
+ *
+ * Sends an offload packet. We use the packet queue_mapping to select the
+ * appropriate Tx queue as follows: bit 0 indicates whether the packet
+ * should be sent as regular or control, bits 1-15 select the queue.
+ */
+int t4_ofld_send(struct adapter *adap, struct sk_buff *skb)
+{
+ int ret;
+
+ local_bh_disable();
+ ret = ofld_send(adap, skb);
+ local_bh_enable();
+ return ret;
+}
+
+/**
+ * cxgb4_ofld_send - send an offload packet
+ * @dev: the net device
+ * @skb: the packet
+ *
+ * Sends an offload packet. This is an exported version of @t4_ofld_send,
+ * intended for ULDs.
+ */
+int cxgb4_ofld_send(struct net_device *dev, struct sk_buff *skb)
+{
+ return t4_ofld_send(netdev2adap(dev), skb);
+}
+EXPORT_SYMBOL(cxgb4_ofld_send);
+
+static inline void copy_frags(struct skb_shared_info *ssi,
+ const struct pkt_gl *gl, unsigned int offset)
+{
+ unsigned int n;
+
+ /* usually there's just one frag */
+ ssi->frags[0].page = gl->frags[0].page;
+ ssi->frags[0].page_offset = gl->frags[0].page_offset + offset;
+ ssi->frags[0].size = gl->frags[0].size - offset;
+ ssi->nr_frags = gl->nfrags;
+ n = gl->nfrags - 1;
+ if (n)
+ memcpy(&ssi->frags[1], &gl->frags[1], n * sizeof(skb_frag_t));
+
+ /* get a reference to the last page, we don't own it */
+ get_page(gl->frags[n].page);
+}
+
+/**
+ * cxgb4_pktgl_to_skb - build an sk_buff from a packet gather list
+ * @gl: the gather list
+ * @skb_len: size of sk_buff main body if it carries fragments
+ * @pull_len: amount of data to move to the sk_buff's main body
+ *
+ * Builds an sk_buff from the given packet gather list. Returns the
+ * sk_buff or %NULL if sk_buff allocation failed.
+ */
+struct sk_buff *cxgb4_pktgl_to_skb(const struct pkt_gl *gl,
+ unsigned int skb_len, unsigned int pull_len)
+{
+ struct sk_buff *skb;
+
+ /*
+ * Below we rely on RX_COPY_THRES being less than the smallest Rx buffer
+ * size, which is expected since buffers are at least PAGE_SIZEd.
+ * In this case packets up to RX_COPY_THRES have only one fragment.
+ */
+ if (gl->tot_len <= RX_COPY_THRES) {
+ skb = dev_alloc_skb(gl->tot_len);
+ if (unlikely(!skb))
+ goto out;
+ __skb_put(skb, gl->tot_len);
+ skb_copy_to_linear_data(skb, gl->va, gl->tot_len);
+ } else {
+ skb = dev_alloc_skb(skb_len);
+ if (unlikely(!skb))
+ goto out;
+ __skb_put(skb, pull_len);
+ skb_copy_to_linear_data(skb, gl->va, pull_len);
+
+ copy_frags(skb_shinfo(skb), gl, pull_len);
+ skb->len = gl->tot_len;
+ skb->data_len = skb->len - pull_len;
+ skb->truesize += skb->data_len;
+ }
+out: return skb;
+}
+EXPORT_SYMBOL(cxgb4_pktgl_to_skb);
+
+/**
+ * t4_pktgl_free - free a packet gather list
+ * @gl: the gather list
+ *
+ * Releases the pages of a packet gather list. We do not own the last
+ * page on the list and do not free it.
+ */
+void t4_pktgl_free(const struct pkt_gl *gl)
+{
+ int n;
+ const skb_frag_t *p;
+
+ for (p = gl->frags, n = gl->nfrags - 1; n--; p++)
+ put_page(p->page);
+}
+
+/*
+ * Process an MPS trace packet. Give it an unused protocol number so it won't
+ * be delivered to anyone and send it to the stack for capture.
+ */
+static noinline int handle_trace_pkt(struct adapter *adap,
+ const struct pkt_gl *gl)
+{
+ struct sk_buff *skb;
+ struct cpl_trace_pkt *p;
+
+ skb = cxgb4_pktgl_to_skb(gl, RX_PULL_LEN, RX_PULL_LEN);
+ if (unlikely(!skb)) {
+ t4_pktgl_free(gl);
+ return 0;
+ }
+
+ p = (struct cpl_trace_pkt *)skb->data;
+ __skb_pull(skb, sizeof(*p));
+ skb_reset_mac_header(skb);
+ skb->protocol = htons(0xffff);
+ skb->dev = adap->port[0];
+ netif_receive_skb(skb);
+ return 0;
+}
+
+static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
+ const struct cpl_rx_pkt *pkt)
+{
+ int ret;
+ struct sk_buff *skb;
+
+ skb = napi_get_frags(&rxq->rspq.napi);
+ if (unlikely(!skb)) {
+ t4_pktgl_free(gl);
+ rxq->stats.rx_drops++;
+ return;
+ }
+
+ copy_frags(skb_shinfo(skb), gl, RX_PKT_PAD);
+ skb->len = gl->tot_len - RX_PKT_PAD;
+ skb->data_len = skb->len;
+ skb->truesize += skb->data_len;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb_record_rx_queue(skb, rxq->rspq.idx);
+
+ if (unlikely(pkt->vlan_ex)) {
+ struct port_info *pi = netdev_priv(rxq->rspq.netdev);
+ struct vlan_group *grp = pi->vlan_grp;
+
+ rxq->stats.vlan_ex++;
+ if (likely(grp)) {
+ ret = vlan_gro_frags(&rxq->rspq.napi, grp,
+ ntohs(pkt->vlan));
+ goto stats;
+ }
+ }
+ ret = napi_gro_frags(&rxq->rspq.napi);
+stats: if (ret == GRO_HELD)
+ rxq->stats.lro_pkts++;
+ else if (ret == GRO_MERGED || ret == GRO_MERGED_FREE)
+ rxq->stats.lro_merged++;
+ rxq->stats.pkts++;
+ rxq->stats.rx_cso++;
+}
+
+/**
+ * t4_ethrx_handler - process an ingress ethernet packet
+ * @q: the response queue that received the packet
+ * @rsp: the response queue descriptor holding the RX_PKT message
+ * @si: the gather list of packet fragments
+ *
+ * Process an ingress ethernet packet and deliver it to the stack.
+ */
+int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
+ const struct pkt_gl *si)
+{
+ bool csum_ok;
+ struct sk_buff *skb;
+ struct port_info *pi;
+ const struct cpl_rx_pkt *pkt;
+ struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+
+ if (unlikely(*(u8 *)rsp == CPL_TRACE_PKT))
+ return handle_trace_pkt(q->adap, si);
+
+ pkt = (void *)&rsp[1];
+ csum_ok = pkt->csum_calc && !pkt->err_vec;
+ if ((pkt->l2info & htonl(RXF_TCP)) &&
+ (q->netdev->features & NETIF_F_GRO) && csum_ok && !pkt->ip_frag) {
+ do_gro(rxq, si, pkt);
+ return 0;
+ }
+
+ skb = cxgb4_pktgl_to_skb(si, RX_PKT_SKB_LEN, RX_PULL_LEN);
+ if (unlikely(!skb)) {
+ t4_pktgl_free(si);
+ rxq->stats.rx_drops++;
+ return 0;
+ }
+
+ __skb_pull(skb, RX_PKT_PAD); /* remove ethernet header padding */
+ skb->protocol = eth_type_trans(skb, q->netdev);
+ skb_record_rx_queue(skb, q->idx);
+ pi = netdev_priv(skb->dev);
+ rxq->stats.pkts++;
+
+ if (csum_ok && (pi->rx_offload & RX_CSO) &&
+ (pkt->l2info & htonl(RXF_UDP | RXF_TCP))) {
+ if (!pkt->ip_frag)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ else {
+ __sum16 c = (__force __sum16)pkt->csum;
+ skb->csum = csum_unfold(c);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+ rxq->stats.rx_cso++;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ if (unlikely(pkt->vlan_ex)) {
+ struct vlan_group *grp = pi->vlan_grp;
+
+ rxq->stats.vlan_ex++;
+ if (likely(grp))
+ vlan_hwaccel_receive_skb(skb, grp, ntohs(pkt->vlan));
+ else
+ dev_kfree_skb_any(skb);
+ } else
+ netif_receive_skb(skb);
+
+ return 0;
+}
+
+/**
+ * restore_rx_bufs - put back a packet's Rx buffers
+ * @si: the packet gather list
+ * @q: the SGE free list
+ * @frags: number of FL buffers to restore
+ *
+ * Puts back on an FL the Rx buffers associated with @si. The buffers
+ * have already been unmapped and are left unmapped, we mark them so to
+ * prevent further unmapping attempts.
+ *
+ * This function undoes a series of @unmap_rx_buf calls when we find out
+ * that the current packet can't be processed right away afterall and we
+ * need to come back to it later. This is a very rare event and there's
+ * no effort to make this particularly efficient.
+ */
+static void restore_rx_bufs(const struct pkt_gl *si, struct sge_fl *q,
+ int frags)
+{
+ struct rx_sw_desc *d;
+
+ while (frags--) {
+ if (q->cidx == 0)
+ q->cidx = q->size - 1;
+ else
+ q->cidx--;
+ d = &q->sdesc[q->cidx];
+ d->page = si->frags[frags].page;
+ d->dma_addr |= RX_UNMAPPED_BUF;
+ q->avail++;
+ }
+}
+
+/**
+ * is_new_response - check if a response is newly written
+ * @r: the response descriptor
+ * @q: the response queue
+ *
+ * Returns true if a response descriptor contains a yet unprocessed
+ * response.
+ */
+static inline bool is_new_response(const struct rsp_ctrl *r,
+ const struct sge_rspq *q)
+{
+ return RSPD_GEN(r->type_gen) == q->gen;
+}
+
+/**
+ * rspq_next - advance to the next entry in a response queue
+ * @q: the queue
+ *
+ * Updates the state of a response queue to advance it to the next entry.
+ */
+static inline void rspq_next(struct sge_rspq *q)
+{
+ q->cur_desc = (void *)q->cur_desc + q->iqe_len;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->gen ^= 1;
+ q->cur_desc = q->desc;
+ }
+}
+
+/**
+ * process_responses - process responses from an SGE response queue
+ * @q: the ingress queue to process
+ * @budget: how many responses can be processed in this round
+ *
+ * Process responses from an SGE response queue up to the supplied budget.
+ * Responses include received packets as well as control messages from FW
+ * or HW.
+ *
+ * Additionally choose the interrupt holdoff time for the next interrupt
+ * on this queue. If the system is under memory shortage use a fairly
+ * long delay to help recovery.
+ */
+static int process_responses(struct sge_rspq *q, int budget)
+{
+ int ret, rsp_type;
+ int budget_left = budget;
+ const struct rsp_ctrl *rc;
+ struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+
+ while (likely(budget_left)) {
+ rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc));
+ if (!is_new_response(rc, q))
+ break;
+
+ rmb();
+ rsp_type = RSPD_TYPE(rc->type_gen);
+ if (likely(rsp_type == RSP_TYPE_FLBUF)) {
+ skb_frag_t *fp;
+ struct pkt_gl si;
+ const struct rx_sw_desc *rsd;
+ u32 len = ntohl(rc->pldbuflen_qid), bufsz, frags;
+
+ if (len & RSPD_NEWBUF) {
+ if (likely(q->offset > 0)) {
+ free_rx_bufs(q->adap, &rxq->fl, 1);
+ q->offset = 0;
+ }
+ len &= RSPD_LEN;
+ }
+ si.tot_len = len;
+
+ /* gather packet fragments */
+ for (frags = 0, fp = si.frags; ; frags++, fp++) {
+ rsd = &rxq->fl.sdesc[rxq->fl.cidx];
+ bufsz = get_buf_size(rsd);
+ fp->page = rsd->page;
+ fp->page_offset = q->offset;
+ fp->size = min(bufsz, len);
+ len -= fp->size;
+ if (!len)
+ break;
+ unmap_rx_buf(q->adap, &rxq->fl);
+ }
+
+ /*
+ * Last buffer remains mapped so explicitly make it
+ * coherent for CPU access.
+ */
+ dma_sync_single_for_cpu(q->adap->pdev_dev,
+ get_buf_addr(rsd),
+ fp->size, DMA_FROM_DEVICE);
+
+ si.va = page_address(si.frags[0].page) +
+ si.frags[0].page_offset;
+ prefetch(si.va);
+
+ si.nfrags = frags + 1;
+ ret = q->handler(q, q->cur_desc, &si);
+ if (likely(ret == 0))
+ q->offset += ALIGN(fp->size, FL_ALIGN);
+ else
+ restore_rx_bufs(&si, &rxq->fl, frags);
+ } else if (likely(rsp_type == RSP_TYPE_CPL)) {
+ ret = q->handler(q, q->cur_desc, NULL);
+ } else {
+ ret = q->handler(q, (const __be64 *)rc, CXGB4_MSG_AN);
+ }
+
+ if (unlikely(ret)) {
+ /* couldn't process descriptor, back off for recovery */
+ q->next_intr_params = QINTR_TIMER_IDX(NOMEM_TMR_IDX);
+ break;
+ }
+
+ rspq_next(q);
+ budget_left--;
+ }
+
+ if (q->offset >= 0 && rxq->fl.size - rxq->fl.avail >= 16)
+ __refill_fl(q->adap, &rxq->fl);
+ return budget - budget_left;
+}
+
+/**
+ * napi_rx_handler - the NAPI handler for Rx processing
+ * @napi: the napi instance
+ * @budget: how many packets we can process in this round
+ *
+ * Handler for new data events when using NAPI. This does not need any
+ * locking or protection from interrupts as data interrupts are off at
+ * this point and other adapter interrupts do not interfere (the latter
+ * in not a concern at all with MSI-X as non-data interrupts then have
+ * a separate handler).
+ */
+static int napi_rx_handler(struct napi_struct *napi, int budget)
+{
+ unsigned int params;
+ struct sge_rspq *q = container_of(napi, struct sge_rspq, napi);
+ int work_done = process_responses(q, budget);
+
+ if (likely(work_done < budget)) {
+ napi_complete(napi);
+ params = q->next_intr_params;
+ q->next_intr_params = q->intr_params;
+ } else
+ params = QINTR_TIMER_IDX(7);
+
+ t4_write_reg(q->adap, MYPF_REG(SGE_PF_GTS), CIDXINC(work_done) |
+ INGRESSQID((u32)q->cntxt_id) | SEINTARM(params));
+ return work_done;
+}
+
+/*
+ * The MSI-X interrupt handler for an SGE response queue.
+ */
+irqreturn_t t4_sge_intr_msix(int irq, void *cookie)
+{
+ struct sge_rspq *q = cookie;
+
+ napi_schedule(&q->napi);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Process the indirect interrupt entries in the interrupt queue and kick off
+ * NAPI for each queue that has generated an entry.
+ */
+static unsigned int process_intrq(struct adapter *adap)
+{
+ unsigned int credits;
+ const struct rsp_ctrl *rc;
+ struct sge_rspq *q = &adap->sge.intrq;
+
+ spin_lock(&adap->sge.intrq_lock);
+ for (credits = 0; ; credits++) {
+ rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc));
+ if (!is_new_response(rc, q))
+ break;
+
+ rmb();
+ if (RSPD_TYPE(rc->type_gen) == RSP_TYPE_INTR) {
+ unsigned int qid = ntohl(rc->pldbuflen_qid);
+
+ napi_schedule(&adap->sge.ingr_map[qid]->napi);
+ }
+
+ rspq_next(q);
+ }
+
+ t4_write_reg(adap, MYPF_REG(SGE_PF_GTS), CIDXINC(credits) |
+ INGRESSQID(q->cntxt_id) | SEINTARM(q->intr_params));
+ spin_unlock(&adap->sge.intrq_lock);
+ return credits;
+}
+
+/*
+ * The MSI interrupt handler, which handles data events from SGE response queues
+ * as well as error and other async events as they all use the same MSI vector.
+ */
+static irqreturn_t t4_intr_msi(int irq, void *cookie)
+{
+ struct adapter *adap = cookie;
+
+ t4_slow_intr_handler(adap);
+ process_intrq(adap);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Interrupt handler for legacy INTx interrupts.
+ * Handles data events from SGE response queues as well as error and other
+ * async events as they all use the same interrupt line.
+ */
+static irqreturn_t t4_intr_intx(int irq, void *cookie)
+{
+ struct adapter *adap = cookie;
+
+ t4_write_reg(adap, MYPF_REG(PCIE_PF_CLI), 0);
+ if (t4_slow_intr_handler(adap) | process_intrq(adap))
+ return IRQ_HANDLED;
+ return IRQ_NONE; /* probably shared interrupt */
+}
+
+/**
+ * t4_intr_handler - select the top-level interrupt handler
+ * @adap: the adapter
+ *
+ * Selects the top-level interrupt handler based on the type of interrupts
+ * (MSI-X, MSI, or INTx).
+ */
+irq_handler_t t4_intr_handler(struct adapter *adap)
+{
+ if (adap->flags & USING_MSIX)
+ return t4_sge_intr_msix;
+ if (adap->flags & USING_MSI)
+ return t4_intr_msi;
+ return t4_intr_intx;
+}
+
+static void sge_rx_timer_cb(unsigned long data)
+{
+ unsigned long m;
+ unsigned int i, cnt[2];
+ struct adapter *adap = (struct adapter *)data;
+ struct sge *s = &adap->sge;
+
+ for (i = 0; i < ARRAY_SIZE(s->starving_fl); i++)
+ for (m = s->starving_fl[i]; m; m &= m - 1) {
+ struct sge_eth_rxq *rxq;
+ unsigned int id = __ffs(m) + i * BITS_PER_LONG;
+ struct sge_fl *fl = s->egr_map[id];
+
+ clear_bit(id, s->starving_fl);
+ smp_mb__after_clear_bit();
+
+ if (fl_starving(fl)) {
+ rxq = container_of(fl, struct sge_eth_rxq, fl);
+ if (napi_reschedule(&rxq->rspq.napi))
+ fl->starving++;
+ else
+ set_bit(id, s->starving_fl);
+ }
+ }
+
+ t4_write_reg(adap, SGE_DEBUG_INDEX, 13);
+ cnt[0] = t4_read_reg(adap, SGE_DEBUG_DATA_HIGH);
+ cnt[1] = t4_read_reg(adap, SGE_DEBUG_DATA_LOW);
+
+ for (i = 0; i < 2; i++)
+ if (cnt[i] >= s->starve_thres) {
+ if (s->idma_state[i] || cnt[i] == 0xffffffff)
+ continue;
+ s->idma_state[i] = 1;
+ t4_write_reg(adap, SGE_DEBUG_INDEX, 11);
+ m = t4_read_reg(adap, SGE_DEBUG_DATA_LOW) >> (i * 16);
+ dev_warn(adap->pdev_dev,
+ "SGE idma%u starvation detected for "
+ "queue %lu\n", i, m & 0xffff);
+ } else if (s->idma_state[i])
+ s->idma_state[i] = 0;
+
+ mod_timer(&s->rx_timer, jiffies + RX_QCHECK_PERIOD);
+}
+
+static void sge_tx_timer_cb(unsigned long data)
+{
+ unsigned long m;
+ unsigned int i, budget;
+ struct adapter *adap = (struct adapter *)data;
+ struct sge *s = &adap->sge;
+
+ for (i = 0; i < ARRAY_SIZE(s->txq_maperr); i++)
+ for (m = s->txq_maperr[i]; m; m &= m - 1) {
+ unsigned long id = __ffs(m) + i * BITS_PER_LONG;
+ struct sge_ofld_txq *txq = s->egr_map[id];
+
+ clear_bit(id, s->txq_maperr);
+ tasklet_schedule(&txq->qresume_tsk);
+ }
+
+ budget = MAX_TIMER_TX_RECLAIM;
+ i = s->ethtxq_rover;
+ do {
+ struct sge_eth_txq *q = &s->ethtxq[i];
+
+ if (q->q.in_use &&
+ time_after_eq(jiffies, q->txq->trans_start + HZ / 100) &&
+ __netif_tx_trylock(q->txq)) {
+ int avail = reclaimable(&q->q);
+
+ if (avail) {
+ if (avail > budget)
+ avail = budget;
+
+ free_tx_desc(adap, &q->q, avail, true);
+ q->q.in_use -= avail;
+ budget -= avail;
+ }
+ __netif_tx_unlock(q->txq);
+ }
+
+ if (++i >= s->ethqsets)
+ i = 0;
+ } while (budget && i != s->ethtxq_rover);
+ s->ethtxq_rover = i;
+ mod_timer(&s->tx_timer, jiffies + (budget ? TX_QCHECK_PERIOD : 2));
+}
+
+int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
+ struct net_device *dev, int intr_idx,
+ struct sge_fl *fl, rspq_handler_t hnd)
+{
+ int ret, flsz = 0;
+ struct fw_iq_cmd c;
+ struct port_info *pi = netdev_priv(dev);
+
+ /* Size needs to be multiple of 16, including status entry. */
+ iq->size = roundup(iq->size, 16);
+
+ iq->desc = alloc_ring(adap->pdev_dev, iq->size, iq->iqe_len, 0,
+ &iq->phys_addr, NULL, 0);
+ if (!iq->desc)
+ return -ENOMEM;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_CMD_EXEC |
+ FW_IQ_CMD_PFN(0) | FW_IQ_CMD_VFN(0));
+ c.alloc_to_len16 = htonl(FW_IQ_CMD_ALLOC | FW_IQ_CMD_IQSTART(1) |
+ FW_LEN16(c));
+ c.type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) |
+ FW_IQ_CMD_IQASYNCH(fwevtq) | FW_IQ_CMD_VIID(pi->viid) |
+ FW_IQ_CMD_IQANDST(intr_idx < 0) | FW_IQ_CMD_IQANUD(1) |
+ FW_IQ_CMD_IQANDSTINDEX(intr_idx >= 0 ? intr_idx :
+ -intr_idx - 1));
+ c.iqdroprss_to_iqesize = htons(FW_IQ_CMD_IQPCIECH(pi->tx_chan) |
+ FW_IQ_CMD_IQGTSMODE |
+ FW_IQ_CMD_IQINTCNTTHRESH(iq->pktcnt_idx) |
+ FW_IQ_CMD_IQESIZE(ilog2(iq->iqe_len) - 4));
+ c.iqsize = htons(iq->size);
+ c.iqaddr = cpu_to_be64(iq->phys_addr);
+
+ if (fl) {
+ fl->size = roundup(fl->size, 8);
+ fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64),
+ sizeof(struct rx_sw_desc), &fl->addr,
+ &fl->sdesc, STAT_LEN);
+ if (!fl->desc)
+ goto fl_nomem;
+
+ flsz = fl->size / 8 + STAT_LEN / sizeof(struct tx_desc);
+ c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN |
+ FW_IQ_CMD_FL0PADEN);
+ c.fl0dcaen_to_fl0cidxfthresh = htons(FW_IQ_CMD_FL0FBMIN(2) |
+ FW_IQ_CMD_FL0FBMAX(3));
+ c.fl0size = htons(flsz);
+ c.fl0addr = cpu_to_be64(fl->addr);
+ }
+
+ ret = t4_wr_mbox(adap, 0, &c, sizeof(c), &c);
+ if (ret)
+ goto err;
+
+ netif_napi_add(dev, &iq->napi, napi_rx_handler, 64);
+ iq->cur_desc = iq->desc;
+ iq->cidx = 0;
+ iq->gen = 1;
+ iq->next_intr_params = iq->intr_params;
+ iq->cntxt_id = ntohs(c.iqid);
+ iq->abs_id = ntohs(c.physiqid);
+ iq->size--; /* subtract status entry */
+ iq->adap = adap;
+ iq->netdev = dev;
+ iq->handler = hnd;
+
+ /* set offset to -1 to distinguish ingress queues without FL */
+ iq->offset = fl ? 0 : -1;
+
+ adap->sge.ingr_map[iq->cntxt_id] = iq;
+
+ if (fl) {
+ fl->cntxt_id = htons(c.fl0id);
+ fl->avail = fl->pend_cred = 0;
+ fl->pidx = fl->cidx = 0;
+ fl->alloc_failed = fl->large_alloc_failed = fl->starving = 0;
+ adap->sge.egr_map[fl->cntxt_id] = fl;
+ refill_fl(adap, fl, fl_cap(fl), GFP_KERNEL);
+ }
+ return 0;
+
+fl_nomem:
+ ret = -ENOMEM;
+err:
+ if (iq->desc) {
+ dma_free_coherent(adap->pdev_dev, iq->size * iq->iqe_len,
+ iq->desc, iq->phys_addr);
+ iq->desc = NULL;
+ }
+ if (fl && fl->desc) {
+ kfree(fl->sdesc);
+ fl->sdesc = NULL;
+ dma_free_coherent(adap->pdev_dev, flsz * sizeof(struct tx_desc),
+ fl->desc, fl->addr);
+ fl->desc = NULL;
+ }
+ return ret;
+}
+
+static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id)
+{
+ q->in_use = 0;
+ q->cidx = q->pidx = 0;
+ q->stops = q->restarts = 0;
+ q->stat = (void *)&q->desc[q->size];
+ q->cntxt_id = id;
+ adap->sge.egr_map[id] = q;
+}
+
+int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
+ struct net_device *dev, struct netdev_queue *netdevq,
+ unsigned int iqid)
+{
+ int ret, nentries;
+ struct fw_eq_eth_cmd c;
+ struct port_info *pi = netdev_priv(dev);
+
+ /* Add status entries */
+ nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+
+ txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
+ sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
+ &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
+ if (!txq->q.desc)
+ return -ENOMEM;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_ETH_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_CMD_EXEC |
+ FW_EQ_ETH_CMD_PFN(0) | FW_EQ_ETH_CMD_VFN(0));
+ c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_ALLOC |
+ FW_EQ_ETH_CMD_EQSTART | FW_LEN16(c));
+ c.viid_pkd = htonl(FW_EQ_ETH_CMD_VIID(pi->viid));
+ c.fetchszm_to_iqid = htonl(FW_EQ_ETH_CMD_HOSTFCMODE(2) |
+ FW_EQ_ETH_CMD_PCIECHN(pi->tx_chan) |
+ FW_EQ_ETH_CMD_IQID(iqid));
+ c.dcaen_to_eqsize = htonl(FW_EQ_ETH_CMD_FBMIN(2) |
+ FW_EQ_ETH_CMD_FBMAX(3) |
+ FW_EQ_ETH_CMD_CIDXFTHRESH(5) |
+ FW_EQ_ETH_CMD_EQSIZE(nentries));
+ c.eqaddr = cpu_to_be64(txq->q.phys_addr);
+
+ ret = t4_wr_mbox(adap, 0, &c, sizeof(c), &c);
+ if (ret) {
+ kfree(txq->q.sdesc);
+ txq->q.sdesc = NULL;
+ dma_free_coherent(adap->pdev_dev,
+ nentries * sizeof(struct tx_desc),
+ txq->q.desc, txq->q.phys_addr);
+ txq->q.desc = NULL;
+ return ret;
+ }
+
+ init_txq(adap, &txq->q, FW_EQ_ETH_CMD_EQID_GET(ntohl(c.eqid_pkd)));
+ txq->txq = netdevq;
+ txq->tso = txq->tx_cso = txq->vlan_ins = 0;
+ txq->mapping_err = 0;
+ return 0;
+}
+
+int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
+ struct net_device *dev, unsigned int iqid,
+ unsigned int cmplqid)
+{
+ int ret, nentries;
+ struct fw_eq_ctrl_cmd c;
+ struct port_info *pi = netdev_priv(dev);
+
+ /* Add status entries */
+ nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+
+ txq->q.desc = alloc_ring(adap->pdev_dev, nentries,
+ sizeof(struct tx_desc), 0, &txq->q.phys_addr,
+ NULL, 0);
+ if (!txq->q.desc)
+ return -ENOMEM;
+
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_CMD_EXEC |
+ FW_EQ_CTRL_CMD_PFN(0) | FW_EQ_CTRL_CMD_VFN(0));
+ c.alloc_to_len16 = htonl(FW_EQ_CTRL_CMD_ALLOC |
+ FW_EQ_CTRL_CMD_EQSTART | FW_LEN16(c));
+ c.cmpliqid_eqid = htonl(FW_EQ_CTRL_CMD_CMPLIQID(cmplqid));
+ c.physeqid_pkd = htonl(0);
+ c.fetchszm_to_iqid = htonl(FW_EQ_CTRL_CMD_HOSTFCMODE(2) |
+ FW_EQ_CTRL_CMD_PCIECHN(pi->tx_chan) |
+ FW_EQ_CTRL_CMD_IQID(iqid));
+ c.dcaen_to_eqsize = htonl(FW_EQ_CTRL_CMD_FBMIN(2) |
+ FW_EQ_CTRL_CMD_FBMAX(3) |
+ FW_EQ_CTRL_CMD_CIDXFTHRESH(5) |
+ FW_EQ_CTRL_CMD_EQSIZE(nentries));
+ c.eqaddr = cpu_to_be64(txq->q.phys_addr);
+
+ ret = t4_wr_mbox(adap, 0, &c, sizeof(c), &c);
+ if (ret) {
+ dma_free_coherent(adap->pdev_dev,
+ nentries * sizeof(struct tx_desc),
+ txq->q.desc, txq->q.phys_addr);
+ txq->q.desc = NULL;
+ return ret;
+ }
+
+ init_txq(adap, &txq->q, FW_EQ_CTRL_CMD_EQID_GET(ntohl(c.cmpliqid_eqid)));
+ txq->adap = adap;
+ skb_queue_head_init(&txq->sendq);
+ tasklet_init(&txq->qresume_tsk, restart_ctrlq, (unsigned long)txq);
+ txq->full = 0;
+ return 0;
+}
+
+int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
+ struct net_device *dev, unsigned int iqid)
+{
+ int ret, nentries;
+ struct fw_eq_ofld_cmd c;
+ struct port_info *pi = netdev_priv(dev);
+
+ /* Add status entries */
+ nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+
+ txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
+ sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
+ &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
+ if (!txq->q.desc)
+ return -ENOMEM;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_CMD_EXEC |
+ FW_EQ_OFLD_CMD_PFN(0) | FW_EQ_OFLD_CMD_VFN(0));
+ c.alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_ALLOC |
+ FW_EQ_OFLD_CMD_EQSTART | FW_LEN16(c));
+ c.fetchszm_to_iqid = htonl(FW_EQ_OFLD_CMD_HOSTFCMODE(2) |
+ FW_EQ_OFLD_CMD_PCIECHN(pi->tx_chan) |
+ FW_EQ_OFLD_CMD_IQID(iqid));
+ c.dcaen_to_eqsize = htonl(FW_EQ_OFLD_CMD_FBMIN(2) |
+ FW_EQ_OFLD_CMD_FBMAX(3) |
+ FW_EQ_OFLD_CMD_CIDXFTHRESH(5) |
+ FW_EQ_OFLD_CMD_EQSIZE(nentries));
+ c.eqaddr = cpu_to_be64(txq->q.phys_addr);
+
+ ret = t4_wr_mbox(adap, 0, &c, sizeof(c), &c);
+ if (ret) {
+ kfree(txq->q.sdesc);
+ txq->q.sdesc = NULL;
+ dma_free_coherent(adap->pdev_dev,
+ nentries * sizeof(struct tx_desc),
+ txq->q.desc, txq->q.phys_addr);
+ txq->q.desc = NULL;
+ return ret;
+ }
+
+ init_txq(adap, &txq->q, FW_EQ_OFLD_CMD_EQID_GET(ntohl(c.eqid_pkd)));
+ txq->adap = adap;
+ skb_queue_head_init(&txq->sendq);
+ tasklet_init(&txq->qresume_tsk, restart_ofldq, (unsigned long)txq);
+ txq->full = 0;
+ txq->mapping_err = 0;
+ return 0;
+}
+
+static void free_txq(struct adapter *adap, struct sge_txq *q)
+{
+ dma_free_coherent(adap->pdev_dev,
+ q->size * sizeof(struct tx_desc) + STAT_LEN,
+ q->desc, q->phys_addr);
+ q->cntxt_id = 0;
+ q->sdesc = NULL;
+ q->desc = NULL;
+}
+
+static void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
+ struct sge_fl *fl)
+{
+ unsigned int fl_id = fl ? fl->cntxt_id : 0xffff;
+
+ adap->sge.ingr_map[rq->cntxt_id] = NULL;
+ t4_iq_free(adap, 0, 0, 0, FW_IQ_TYPE_FL_INT_CAP, rq->cntxt_id, fl_id,
+ 0xffff);
+ dma_free_coherent(adap->pdev_dev, (rq->size + 1) * rq->iqe_len,
+ rq->desc, rq->phys_addr);
+ netif_napi_del(&rq->napi);
+ rq->netdev = NULL;
+ rq->cntxt_id = rq->abs_id = 0;
+ rq->desc = NULL;
+
+ if (fl) {
+ free_rx_bufs(adap, fl, fl->avail);
+ dma_free_coherent(adap->pdev_dev, fl->size * 8 + STAT_LEN,
+ fl->desc, fl->addr);
+ kfree(fl->sdesc);
+ fl->sdesc = NULL;
+ fl->cntxt_id = 0;
+ fl->desc = NULL;
+ }
+}
+
+/**
+ * t4_free_sge_resources - free SGE resources
+ * @adap: the adapter
+ *
+ * Frees resources used by the SGE queue sets.
+ */
+void t4_free_sge_resources(struct adapter *adap)
+{
+ int i;
+ struct sge_eth_rxq *eq = adap->sge.ethrxq;
+ struct sge_eth_txq *etq = adap->sge.ethtxq;
+ struct sge_ofld_rxq *oq = adap->sge.ofldrxq;
+
+ /* clean up Ethernet Tx/Rx queues */
+ for (i = 0; i < adap->sge.ethqsets; i++, eq++, etq++) {
+ if (eq->rspq.desc)
+ free_rspq_fl(adap, &eq->rspq, &eq->fl);
+ if (etq->q.desc) {
+ t4_eth_eq_free(adap, 0, 0, 0, etq->q.cntxt_id);
+ free_tx_desc(adap, &etq->q, etq->q.in_use, true);
+ kfree(etq->q.sdesc);
+ free_txq(adap, &etq->q);
+ }
+ }
+
+ /* clean up RDMA and iSCSI Rx queues */
+ for (i = 0; i < adap->sge.ofldqsets; i++, oq++) {
+ if (oq->rspq.desc)
+ free_rspq_fl(adap, &oq->rspq, &oq->fl);
+ }
+ for (i = 0, oq = adap->sge.rdmarxq; i < adap->sge.rdmaqs; i++, oq++) {
+ if (oq->rspq.desc)
+ free_rspq_fl(adap, &oq->rspq, &oq->fl);
+ }
+
+ /* clean up offload Tx queues */
+ for (i = 0; i < ARRAY_SIZE(adap->sge.ofldtxq); i++) {
+ struct sge_ofld_txq *q = &adap->sge.ofldtxq[i];
+
+ if (q->q.desc) {
+ tasklet_kill(&q->qresume_tsk);
+ t4_ofld_eq_free(adap, 0, 0, 0, q->q.cntxt_id);
+ free_tx_desc(adap, &q->q, q->q.in_use, false);
+ kfree(q->q.sdesc);
+ __skb_queue_purge(&q->sendq);
+ free_txq(adap, &q->q);
+ }
+ }
+
+ /* clean up control Tx queues */
+ for (i = 0; i < ARRAY_SIZE(adap->sge.ctrlq); i++) {
+ struct sge_ctrl_txq *cq = &adap->sge.ctrlq[i];
+
+ if (cq->q.desc) {
+ tasklet_kill(&cq->qresume_tsk);
+ t4_ctrl_eq_free(adap, 0, 0, 0, cq->q.cntxt_id);
+ __skb_queue_purge(&cq->sendq);
+ free_txq(adap, &cq->q);
+ }
+ }
+
+ if (adap->sge.fw_evtq.desc)
+ free_rspq_fl(adap, &adap->sge.fw_evtq, NULL);
+
+ if (adap->sge.intrq.desc)
+ free_rspq_fl(adap, &adap->sge.intrq, NULL);
+
+ /* clear the reverse egress queue map */
+ memset(adap->sge.egr_map, 0, sizeof(adap->sge.egr_map));
+}
+
+void t4_sge_start(struct adapter *adap)
+{
+ adap->sge.ethtxq_rover = 0;
+ mod_timer(&adap->sge.rx_timer, jiffies + RX_QCHECK_PERIOD);
+ mod_timer(&adap->sge.tx_timer, jiffies + TX_QCHECK_PERIOD);
+}
+
+/**
+ * t4_sge_stop - disable SGE operation
+ * @adap: the adapter
+ *
+ * Stop tasklets and timers associated with the DMA engine. Note that
+ * this is effective only if measures have been taken to disable any HW
+ * events that may restart them.
+ */
+void t4_sge_stop(struct adapter *adap)
+{
+ int i;
+ struct sge *s = &adap->sge;
+
+ if (in_interrupt()) /* actions below require waiting */
+ return;
+
+ if (s->rx_timer.function)
+ del_timer_sync(&s->rx_timer);
+ if (s->tx_timer.function)
+ del_timer_sync(&s->tx_timer);
+
+ for (i = 0; i < ARRAY_SIZE(s->ofldtxq); i++) {
+ struct sge_ofld_txq *q = &s->ofldtxq[i];
+
+ if (q->q.desc)
+ tasklet_kill(&q->qresume_tsk);
+ }
+ for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++) {
+ struct sge_ctrl_txq *cq = &s->ctrlq[i];
+
+ if (cq->q.desc)
+ tasklet_kill(&cq->qresume_tsk);
+ }
+}
+
+/**
+ * t4_sge_init - initialize SGE
+ * @adap: the adapter
+ *
+ * Performs SGE initialization needed every time after a chip reset.
+ * We do not initialize any of the queues here, instead the driver
+ * top-level must request them individually.
+ */
+void t4_sge_init(struct adapter *adap)
+{
+ struct sge *s = &adap->sge;
+ unsigned int fl_align_log = ilog2(FL_ALIGN);
+
+ t4_set_reg_field(adap, SGE_CONTROL, PKTSHIFT_MASK |
+ INGPADBOUNDARY_MASK | EGRSTATUSPAGESIZE,
+ INGPADBOUNDARY(fl_align_log - 5) | PKTSHIFT(2) |
+ RXPKTCPLMODE |
+ (STAT_LEN == 128 ? EGRSTATUSPAGESIZE : 0));
+ t4_set_reg_field(adap, SGE_HOST_PAGE_SIZE, HOSTPAGESIZEPF0_MASK,
+ HOSTPAGESIZEPF0(PAGE_SHIFT - 10));
+ t4_write_reg(adap, SGE_FL_BUFFER_SIZE0, PAGE_SIZE);
+#if FL_PG_ORDER > 0
+ t4_write_reg(adap, SGE_FL_BUFFER_SIZE1, PAGE_SIZE << FL_PG_ORDER);
+#endif
+ t4_write_reg(adap, SGE_INGRESS_RX_THRESHOLD,
+ THRESHOLD_0(s->counter_val[0]) |
+ THRESHOLD_1(s->counter_val[1]) |
+ THRESHOLD_2(s->counter_val[2]) |
+ THRESHOLD_3(s->counter_val[3]));
+ t4_write_reg(adap, SGE_TIMER_VALUE_0_AND_1,
+ TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[0])) |
+ TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[1])));
+ t4_write_reg(adap, SGE_TIMER_VALUE_2_AND_3,
+ TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[2])) |
+ TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[3])));
+ t4_write_reg(adap, SGE_TIMER_VALUE_4_AND_5,
+ TIMERVALUE0(us_to_core_ticks(adap, s->timer_val[4])) |
+ TIMERVALUE1(us_to_core_ticks(adap, s->timer_val[5])));
+ setup_timer(&s->rx_timer, sge_rx_timer_cb, (unsigned long)adap);
+ setup_timer(&s->tx_timer, sge_tx_timer_cb, (unsigned long)adap);
+ s->starve_thres = core_ticks_per_usec(adap) * 1000000; /* 1 s */
+ s->idma_state[0] = s->idma_state[1] = 0;
+ spin_lock_init(&s->intrq_lock);
+}
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include "cxgb4.h"
+#include "t4_regs.h"
+#include "t4fw_api.h"
+
+/**
+ * t4_wait_op_done_val - wait until an operation is completed
+ * @adapter: the adapter performing the operation
+ * @reg: the register to check for completion
+ * @mask: a single-bit field within @reg that indicates completion
+ * @polarity: the value of the field when the operation is completed
+ * @attempts: number of check iterations
+ * @delay: delay in usecs between iterations
+ * @valp: where to store the value of the register at completion time
+ *
+ * Wait until an operation is completed by checking a bit in a register
+ * up to @attempts times. If @valp is not NULL the value of the register
+ * at the time it indicated completion is stored there. Returns 0 if the
+ * operation completes and -EAGAIN otherwise.
+ */
+int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay, u32 *valp)
+{
+ while (1) {
+ u32 val = t4_read_reg(adapter, reg);
+
+ if (!!(val & mask) == polarity) {
+ if (valp)
+ *valp = val;
+ return 0;
+ }
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ udelay(delay);
+ }
+}
+
+static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay)
+{
+ return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts,
+ delay, NULL);
+}
+
+/**
+ * t4_set_reg_field - set a register field to a value
+ * @adapter: the adapter to program
+ * @addr: the register address
+ * @mask: specifies the portion of the register to modify
+ * @val: the new value for the register field
+ *
+ * Sets a register field specified by the supplied mask to the
+ * given value.
+ */
+void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
+ u32 val)
+{
+ u32 v = t4_read_reg(adapter, addr) & ~mask;
+
+ t4_write_reg(adapter, addr, v | val);
+ (void) t4_read_reg(adapter, addr); /* flush */
+}
+
+/**
+ * t4_read_indirect - read indirectly addressed registers
+ * @adap: the adapter
+ * @addr_reg: register holding the indirect address
+ * @data_reg: register holding the value of the indirect register
+ * @vals: where the read register values are stored
+ * @nregs: how many indirect registers to read
+ * @start_idx: index of first indirect register to read
+ *
+ * Reads registers that are accessed indirectly through an address/data
+ * register pair.
+ */
+void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
+ unsigned int data_reg, u32 *vals, unsigned int nregs,
+ unsigned int start_idx)
+{
+ while (nregs--) {
+ t4_write_reg(adap, addr_reg, start_idx);
+ *vals++ = t4_read_reg(adap, data_reg);
+ start_idx++;
+ }
+}
+
+/**
+ * t4_write_indirect - write indirectly addressed registers
+ * @adap: the adapter
+ * @addr_reg: register holding the indirect addresses
+ * @data_reg: register holding the value for the indirect registers
+ * @vals: values to write
+ * @nregs: how many indirect registers to write
+ * @start_idx: address of first indirect register to write
+ *
+ * Writes a sequential block of registers that are accessed indirectly
+ * through an address/data register pair.
+ */
+void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
+ unsigned int data_reg, const u32 *vals,
+ unsigned int nregs, unsigned int start_idx)
+{
+ while (nregs--) {
+ t4_write_reg(adap, addr_reg, start_idx++);
+ t4_write_reg(adap, data_reg, *vals++);
+ }
+}
+
+/*
+ * Get the reply to a mailbox command and store it in @rpl in big-endian order.
+ */
+static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
+ u32 mbox_addr)
+{
+ for ( ; nflit; nflit--, mbox_addr += 8)
+ *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
+}
+
+/*
+ * Handle a FW assertion reported in a mailbox.
+ */
+static void fw_asrt(struct adapter *adap, u32 mbox_addr)
+{
+ struct fw_debug_cmd asrt;
+
+ get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
+ dev_alert(adap->pdev_dev,
+ "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
+ asrt.u.assert.filename_0_7, ntohl(asrt.u.assert.line),
+ ntohl(asrt.u.assert.x), ntohl(asrt.u.assert.y));
+}
+
+static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg)
+{
+ dev_err(adap->pdev_dev,
+ "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox,
+ (unsigned long long)t4_read_reg64(adap, data_reg),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 8),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 16),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 24),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 32),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 40),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 48),
+ (unsigned long long)t4_read_reg64(adap, data_reg + 56));
+}
+
+/**
+ * t4_wr_mbox_meat - send a command to FW through the given mailbox
+ * @adap: the adapter
+ * @mbox: index of the mailbox to use
+ * @cmd: the command to write
+ * @size: command length in bytes
+ * @rpl: where to optionally store the reply
+ * @sleep_ok: if true we may sleep while awaiting command completion
+ *
+ * Sends the given command to FW through the selected mailbox and waits
+ * for the FW to execute the command. If @rpl is not %NULL it is used to
+ * store the FW's reply to the command. The command and its optional
+ * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms
+ * to respond. @sleep_ok determines whether we may sleep while awaiting
+ * the response. If sleeping is allowed we use progressive backoff
+ * otherwise we spin.
+ *
+ * The return value is 0 on success or a negative errno on failure. A
+ * failure can happen either because we are not able to execute the
+ * command or FW executes it but signals an error. In the latter case
+ * the return value is the error code indicated by FW (negated).
+ */
+int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
+ void *rpl, bool sleep_ok)
+{
+ static int delay[] = {
+ 1, 1, 3, 5, 10, 10, 20, 50, 100, 200
+ };
+
+ u32 v;
+ u64 res;
+ int i, ms, delay_idx;
+ const __be64 *p = cmd;
+ u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA);
+ u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL);
+
+ if ((size & 15) || size > MBOX_LEN)
+ return -EINVAL;
+
+ v = MBOWNER_GET(t4_read_reg(adap, ctl_reg));
+ for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
+ v = MBOWNER_GET(t4_read_reg(adap, ctl_reg));
+
+ if (v != MBOX_OWNER_DRV)
+ return v ? -EBUSY : -ETIMEDOUT;
+
+ for (i = 0; i < size; i += 8)
+ t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++));
+
+ t4_write_reg(adap, ctl_reg, MBMSGVALID | MBOWNER(MBOX_OWNER_FW));
+ t4_read_reg(adap, ctl_reg); /* flush write */
+
+ delay_idx = 0;
+ ms = delay[0];
+
+ for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) {
+ if (sleep_ok) {
+ ms = delay[delay_idx]; /* last element may repeat */
+ if (delay_idx < ARRAY_SIZE(delay) - 1)
+ delay_idx++;
+ msleep(ms);
+ } else
+ mdelay(ms);
+
+ v = t4_read_reg(adap, ctl_reg);
+ if (MBOWNER_GET(v) == MBOX_OWNER_DRV) {
+ if (!(v & MBMSGVALID)) {
+ t4_write_reg(adap, ctl_reg, 0);
+ continue;
+ }
+
+ res = t4_read_reg64(adap, data_reg);
+ if (FW_CMD_OP_GET(res >> 32) == FW_DEBUG_CMD) {
+ fw_asrt(adap, data_reg);
+ res = FW_CMD_RETVAL(EIO);
+ } else if (rpl)
+ get_mbox_rpl(adap, rpl, size / 8, data_reg);
+
+ if (FW_CMD_RETVAL_GET((int)res))
+ dump_mbox(adap, mbox, data_reg);
+ t4_write_reg(adap, ctl_reg, 0);
+ return -FW_CMD_RETVAL_GET((int)res);
+ }
+ }
+
+ dump_mbox(adap, mbox, data_reg);
+ dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n",
+ *(const u8 *)cmd, mbox);
+ return -ETIMEDOUT;
+}
+
+/**
+ * t4_mc_read - read from MC through backdoor accesses
+ * @adap: the adapter
+ * @addr: address of first byte requested
+ * @data: 64 bytes of data containing the requested address
+ * @ecc: where to store the corresponding 64-bit ECC word
+ *
+ * Read 64 bytes of data from MC starting at a 64-byte-aligned address
+ * that covers the requested address @addr. If @parity is not %NULL it
+ * is assigned the 64-bit ECC word for the read data.
+ */
+int t4_mc_read(struct adapter *adap, u32 addr, __be32 *data, u64 *ecc)
+{
+ int i;
+
+ if (t4_read_reg(adap, MC_BIST_CMD) & START_BIST)
+ return -EBUSY;
+ t4_write_reg(adap, MC_BIST_CMD_ADDR, addr & ~0x3fU);
+ t4_write_reg(adap, MC_BIST_CMD_LEN, 64);
+ t4_write_reg(adap, MC_BIST_DATA_PATTERN, 0xc);
+ t4_write_reg(adap, MC_BIST_CMD, BIST_OPCODE(1) | START_BIST |
+ BIST_CMD_GAP(1));
+ i = t4_wait_op_done(adap, MC_BIST_CMD, START_BIST, 0, 10, 1);
+ if (i)
+ return i;
+
+#define MC_DATA(i) MC_BIST_STATUS_REG(MC_BIST_STATUS_RDATA, i)
+
+ for (i = 15; i >= 0; i--)
+ *data++ = htonl(t4_read_reg(adap, MC_DATA(i)));
+ if (ecc)
+ *ecc = t4_read_reg64(adap, MC_DATA(16));
+#undef MC_DATA
+ return 0;
+}
+
+/**
+ * t4_edc_read - read from EDC through backdoor accesses
+ * @adap: the adapter
+ * @idx: which EDC to access
+ * @addr: address of first byte requested
+ * @data: 64 bytes of data containing the requested address
+ * @ecc: where to store the corresponding 64-bit ECC word
+ *
+ * Read 64 bytes of data from EDC starting at a 64-byte-aligned address
+ * that covers the requested address @addr. If @parity is not %NULL it
+ * is assigned the 64-bit ECC word for the read data.
+ */
+int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc)
+{
+ int i;
+
+ idx *= EDC_STRIDE;
+ if (t4_read_reg(adap, EDC_BIST_CMD + idx) & START_BIST)
+ return -EBUSY;
+ t4_write_reg(adap, EDC_BIST_CMD_ADDR + idx, addr & ~0x3fU);
+ t4_write_reg(adap, EDC_BIST_CMD_LEN + idx, 64);
+ t4_write_reg(adap, EDC_BIST_DATA_PATTERN + idx, 0xc);
+ t4_write_reg(adap, EDC_BIST_CMD + idx,
+ BIST_OPCODE(1) | BIST_CMD_GAP(1) | START_BIST);
+ i = t4_wait_op_done(adap, EDC_BIST_CMD + idx, START_BIST, 0, 10, 1);
+ if (i)
+ return i;
+
+#define EDC_DATA(i) (EDC_BIST_STATUS_REG(EDC_BIST_STATUS_RDATA, i) + idx)
+
+ for (i = 15; i >= 0; i--)
+ *data++ = htonl(t4_read_reg(adap, EDC_DATA(i)));
+ if (ecc)
+ *ecc = t4_read_reg64(adap, EDC_DATA(16));
+#undef EDC_DATA
+ return 0;
+}
+
+#define VPD_ENTRY(name, len) \
+ u8 name##_kword[2]; u8 name##_len; u8 name##_data[len]
+
+/*
+ * Partial EEPROM Vital Product Data structure. Includes only the ID and
+ * VPD-R sections.
+ */
+struct t4_vpd {
+ u8 id_tag;
+ u8 id_len[2];
+ u8 id_data[ID_LEN];
+ u8 vpdr_tag;
+ u8 vpdr_len[2];
+ VPD_ENTRY(pn, 16); /* part number */
+ VPD_ENTRY(ec, EC_LEN); /* EC level */
+ VPD_ENTRY(sn, SERNUM_LEN); /* serial number */
+ VPD_ENTRY(na, 12); /* MAC address base */
+ VPD_ENTRY(port_type, 8); /* port types */
+ VPD_ENTRY(gpio, 14); /* GPIO usage */
+ VPD_ENTRY(cclk, 6); /* core clock */
+ VPD_ENTRY(port_addr, 8); /* port MDIO addresses */
+ VPD_ENTRY(rv, 1); /* csum */
+ u32 pad; /* for multiple-of-4 sizing and alignment */
+};
+
+#define EEPROM_STAT_ADDR 0x7bfc
+#define VPD_BASE 0
+
+/**
+ * t4_seeprom_wp - enable/disable EEPROM write protection
+ * @adapter: the adapter
+ * @enable: whether to enable or disable write protection
+ *
+ * Enables or disables write protection on the serial EEPROM.
+ */
+int t4_seeprom_wp(struct adapter *adapter, bool enable)
+{
+ unsigned int v = enable ? 0xc : 0;
+ int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v);
+ return ret < 0 ? ret : 0;
+}
+
+/**
+ * get_vpd_params - read VPD parameters from VPD EEPROM
+ * @adapter: adapter to read
+ * @p: where to store the parameters
+ *
+ * Reads card parameters stored in VPD EEPROM.
+ */
+static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+{
+ int ret;
+ struct t4_vpd vpd;
+ u8 *q = (u8 *)&vpd, csum;
+
+ ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(vpd), &vpd);
+ if (ret < 0)
+ return ret;
+
+ for (csum = 0; q <= vpd.rv_data; q++)
+ csum += *q;
+
+ if (csum) {
+ dev_err(adapter->pdev_dev,
+ "corrupted VPD EEPROM, actual csum %u\n", csum);
+ return -EINVAL;
+ }
+
+ p->cclk = simple_strtoul(vpd.cclk_data, NULL, 10);
+ memcpy(p->id, vpd.id_data, sizeof(vpd.id_data));
+ strim(p->id);
+ memcpy(p->ec, vpd.ec_data, sizeof(vpd.ec_data));
+ strim(p->ec);
+ memcpy(p->sn, vpd.sn_data, sizeof(vpd.sn_data));
+ strim(p->sn);
+ return 0;
+}
+
+/* serial flash and firmware constants */
+enum {
+ SF_ATTEMPTS = 10, /* max retries for SF operations */
+
+ /* flash command opcodes */
+ SF_PROG_PAGE = 2, /* program page */
+ SF_WR_DISABLE = 4, /* disable writes */
+ SF_RD_STATUS = 5, /* read status register */
+ SF_WR_ENABLE = 6, /* enable writes */
+ SF_RD_DATA_FAST = 0xb, /* read flash */
+ SF_ERASE_SECTOR = 0xd8, /* erase sector */
+
+ FW_START_SEC = 8, /* first flash sector for FW */
+ FW_END_SEC = 15, /* last flash sector for FW */
+ FW_IMG_START = FW_START_SEC * SF_SEC_SIZE,
+ FW_MAX_SIZE = (FW_END_SEC - FW_START_SEC + 1) * SF_SEC_SIZE,
+};
+
+/**
+ * sf1_read - read data from the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to read
+ * @cont: whether another operation will be chained
+ * @lock: whether to lock SF for PL access only
+ * @valp: where to store the read data
+ *
+ * Reads up to 4 bytes of data from the serial flash. The location of
+ * the read needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ int lock, u32 *valp)
+{
+ int ret;
+
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t4_read_reg(adapter, SF_OP) & BUSY)
+ return -EBUSY;
+ cont = cont ? SF_CONT : 0;
+ lock = lock ? SF_LOCK : 0;
+ t4_write_reg(adapter, SF_OP, lock | cont | BYTECNT(byte_cnt - 1));
+ ret = t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5);
+ if (!ret)
+ *valp = t4_read_reg(adapter, SF_DATA);
+ return ret;
+}
+
+/**
+ * sf1_write - write data to the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to write
+ * @cont: whether another operation will be chained
+ * @lock: whether to lock SF for PL access only
+ * @val: value to write
+ *
+ * Writes up to 4 bytes of data to the serial flash. The location of
+ * the write needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ int lock, u32 val)
+{
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t4_read_reg(adapter, SF_OP) & BUSY)
+ return -EBUSY;
+ cont = cont ? SF_CONT : 0;
+ lock = lock ? SF_LOCK : 0;
+ t4_write_reg(adapter, SF_DATA, val);
+ t4_write_reg(adapter, SF_OP, lock |
+ cont | BYTECNT(byte_cnt - 1) | OP_WR);
+ return t4_wait_op_done(adapter, SF_OP, BUSY, 0, SF_ATTEMPTS, 5);
+}
+
+/**
+ * flash_wait_op - wait for a flash operation to complete
+ * @adapter: the adapter
+ * @attempts: max number of polls of the status register
+ * @delay: delay between polls in ms
+ *
+ * Wait for a flash operation to complete by polling the status register.
+ */
+static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
+{
+ int ret;
+ u32 status;
+
+ while (1) {
+ if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 ||
+ (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0)
+ return ret;
+ if (!(status & 1))
+ return 0;
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ msleep(delay);
+ }
+}
+
+/**
+ * t4_read_flash - read words from serial flash
+ * @adapter: the adapter
+ * @addr: the start address for the read
+ * @nwords: how many 32-bit words to read
+ * @data: where to store the read data
+ * @byte_oriented: whether to store data as bytes or as words
+ *
+ * Read the specified number of 32-bit words from the serial flash.
+ * If @byte_oriented is set the read data is stored as a byte array
+ * (i.e., big-endian), otherwise as 32-bit words in the platform's
+ * natural endianess.
+ */
+int t4_read_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int nwords, u32 *data, int byte_oriented)
+{
+ int ret;
+
+ if (addr + nwords * sizeof(u32) > SF_SIZE || (addr & 3))
+ return -EINVAL;
+
+ addr = swab32(addr) | SF_RD_DATA_FAST;
+
+ if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 ||
+ (ret = sf1_read(adapter, 1, 1, 0, data)) != 0)
+ return ret;
+
+ for ( ; nwords; nwords--, data++) {
+ ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
+ if (nwords == 1)
+ t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
+ if (ret)
+ return ret;
+ if (byte_oriented)
+ *data = htonl(*data);
+ }
+ return 0;
+}
+
+/**
+ * t4_write_flash - write up to a page of data to the serial flash
+ * @adapter: the adapter
+ * @addr: the start address to write
+ * @n: length of data to write in bytes
+ * @data: the data to write
+ *
+ * Writes up to a page of data (256 bytes) to the serial flash starting
+ * at the given address. All the data must be written to the same page.
+ */
+static int t4_write_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int n, const u8 *data)
+{
+ int ret;
+ u32 buf[64];
+ unsigned int i, c, left, val, offset = addr & 0xff;
+
+ if (addr >= SF_SIZE || offset + n > SF_PAGE_SIZE)
+ return -EINVAL;
+
+ val = swab32(addr) | SF_PROG_PAGE;
+
+ if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
+ (ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
+ goto unlock;
+
+ for (left = n; left; left -= c) {
+ c = min(left, 4U);
+ for (val = 0, i = 0; i < c; ++i)
+ val = (val << 8) + *data++;
+
+ ret = sf1_write(adapter, c, c != left, 1, val);
+ if (ret)
+ goto unlock;
+ }
+ ret = flash_wait_op(adapter, 5, 1);
+ if (ret)
+ goto unlock;
+
+ t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
+
+ /* Read the page to verify the write succeeded */
+ ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+ if (ret)
+ return ret;
+
+ if (memcmp(data - n, (u8 *)buf + offset, n)) {
+ dev_err(adapter->pdev_dev,
+ "failed to correctly write the flash page at %#x\n",
+ addr);
+ return -EIO;
+ }
+ return 0;
+
+unlock:
+ t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
+ return ret;
+}
+
+/**
+ * get_fw_version - read the firmware version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the FW version from flash.
+ */
+static int get_fw_version(struct adapter *adapter, u32 *vers)
+{
+ return t4_read_flash(adapter,
+ FW_IMG_START + offsetof(struct fw_hdr, fw_ver), 1,
+ vers, 0);
+}
+
+/**
+ * get_tp_version - read the TP microcode version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the TP microcode version from flash.
+ */
+static int get_tp_version(struct adapter *adapter, u32 *vers)
+{
+ return t4_read_flash(adapter, FW_IMG_START + offsetof(struct fw_hdr,
+ tp_microcode_ver),
+ 1, vers, 0);
+}
+
+/**
+ * t4_check_fw_version - check if the FW is compatible with this driver
+ * @adapter: the adapter
+ *
+ * Checks if an adapter's FW is compatible with the driver. Returns 0
+ * if there's exact match, a negative error if the version could not be
+ * read or there's a major version mismatch, and a positive value if the
+ * expected major version is found but there's a minor version mismatch.
+ */
+int t4_check_fw_version(struct adapter *adapter)
+{
+ u32 api_vers[2];
+ int ret, major, minor, micro;
+
+ ret = get_fw_version(adapter, &adapter->params.fw_vers);
+ if (!ret)
+ ret = get_tp_version(adapter, &adapter->params.tp_vers);
+ if (!ret)
+ ret = t4_read_flash(adapter,
+ FW_IMG_START + offsetof(struct fw_hdr, intfver_nic),
+ 2, api_vers, 1);
+ if (ret)
+ return ret;
+
+ major = FW_HDR_FW_VER_MAJOR_GET(adapter->params.fw_vers);
+ minor = FW_HDR_FW_VER_MINOR_GET(adapter->params.fw_vers);
+ micro = FW_HDR_FW_VER_MICRO_GET(adapter->params.fw_vers);
+ memcpy(adapter->params.api_vers, api_vers,
+ sizeof(adapter->params.api_vers));
+
+ if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */
+ dev_err(adapter->pdev_dev,
+ "card FW has major version %u, driver wants %u\n",
+ major, FW_VERSION_MAJOR);
+ return -EINVAL;
+ }
+
+ if (minor == FW_VERSION_MINOR && micro == FW_VERSION_MICRO)
+ return 0; /* perfect match */
+
+ /* Minor/micro version mismatch. Report it but often it's OK. */
+ return 1;
+}
+
+/**
+ * t4_flash_erase_sectors - erase a range of flash sectors
+ * @adapter: the adapter
+ * @start: the first sector to erase
+ * @end: the last sector to erase
+ *
+ * Erases the sectors in the given inclusive range.
+ */
+static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end)
+{
+ int ret = 0;
+
+ while (start <= end) {
+ if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
+ (ret = sf1_write(adapter, 4, 0, 1,
+ SF_ERASE_SECTOR | (start << 8))) != 0 ||
+ (ret = flash_wait_op(adapter, 5, 500)) != 0) {
+ dev_err(adapter->pdev_dev,
+ "erase of flash sector %d failed, error %d\n",
+ start, ret);
+ break;
+ }
+ start++;
+ }
+ t4_write_reg(adapter, SF_OP, 0); /* unlock SF */
+ return ret;
+}
+
+/**
+ * t4_load_fw - download firmware
+ * @adap: the adapter
+ * @fw_data: the firmware image to write
+ * @size: image size
+ *
+ * Write the supplied firmware image to the card's serial flash.
+ */
+int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
+{
+ u32 csum;
+ int ret, addr;
+ unsigned int i;
+ u8 first_page[SF_PAGE_SIZE];
+ const u32 *p = (const u32 *)fw_data;
+ const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data;
+
+ if (!size) {
+ dev_err(adap->pdev_dev, "FW image has no data\n");
+ return -EINVAL;
+ }
+ if (size & 511) {
+ dev_err(adap->pdev_dev,
+ "FW image size not multiple of 512 bytes\n");
+ return -EINVAL;
+ }
+ if (ntohs(hdr->len512) * 512 != size) {
+ dev_err(adap->pdev_dev,
+ "FW image size differs from size in FW header\n");
+ return -EINVAL;
+ }
+ if (size > FW_MAX_SIZE) {
+ dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n",
+ FW_MAX_SIZE);
+ return -EFBIG;
+ }
+
+ for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+ csum += ntohl(p[i]);
+
+ if (csum != 0xffffffff) {
+ dev_err(adap->pdev_dev,
+ "corrupted firmware image, checksum %#x\n", csum);
+ return -EINVAL;
+ }
+
+ i = DIV_ROUND_UP(size, SF_SEC_SIZE); /* # of sectors spanned */
+ ret = t4_flash_erase_sectors(adap, FW_START_SEC, FW_START_SEC + i - 1);
+ if (ret)
+ goto out;
+
+ /*
+ * We write the correct version at the end so the driver can see a bad
+ * version if the FW write fails. Start by writing a copy of the
+ * first page with a bad version.
+ */
+ memcpy(first_page, fw_data, SF_PAGE_SIZE);
+ ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff);
+ ret = t4_write_flash(adap, FW_IMG_START, SF_PAGE_SIZE, first_page);
+ if (ret)
+ goto out;
+
+ addr = FW_IMG_START;
+ for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
+ addr += SF_PAGE_SIZE;
+ fw_data += SF_PAGE_SIZE;
+ ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data);
+ if (ret)
+ goto out;
+ }
+
+ ret = t4_write_flash(adap,
+ FW_IMG_START + offsetof(struct fw_hdr, fw_ver),
+ sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver);
+out:
+ if (ret)
+ dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
+ ret);
+ return ret;
+}
+
+#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
+ FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG)
+
+/**
+ * t4_link_start - apply link configuration to MAC/PHY
+ * @phy: the PHY to setup
+ * @mac: the MAC to setup
+ * @lc: the requested link configuration
+ *
+ * Set up a port's MAC and PHY according to a desired link configuration.
+ * - If the PHY can auto-negotiate first decide what to advertise, then
+ * enable/disable auto-negotiation as desired, and reset.
+ * - If the PHY does not auto-negotiate just reset it.
+ * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
+ * otherwise do it later based on the outcome of auto-negotiation.
+ */
+int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port,
+ struct link_config *lc)
+{
+ struct fw_port_cmd c;
+ unsigned int fc = 0, mdi = FW_PORT_MDI(FW_PORT_MDI_AUTO);
+
+ lc->link_ok = 0;
+ if (lc->requested_fc & PAUSE_RX)
+ fc |= FW_PORT_CAP_FC_RX;
+ if (lc->requested_fc & PAUSE_TX)
+ fc |= FW_PORT_CAP_FC_TX;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_PORT_CMD_PORTID(port));
+ c.action_to_len16 = htonl(FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
+ FW_LEN16(c));
+
+ if (!(lc->supported & FW_PORT_CAP_ANEG)) {
+ c.u.l1cfg.rcap = htonl((lc->supported & ADVERT_MASK) | fc);
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ } else if (lc->autoneg == AUTONEG_DISABLE) {
+ c.u.l1cfg.rcap = htonl(lc->requested_speed | fc | mdi);
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ } else
+ c.u.l1cfg.rcap = htonl(lc->advertising | fc | mdi);
+
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_restart_aneg - restart autonegotiation
+ * @adap: the adapter
+ * @mbox: mbox to use for the FW command
+ * @port: the port id
+ *
+ * Restarts autonegotiation for the selected port.
+ */
+int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
+{
+ struct fw_port_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_PORT_CMD_PORTID(port));
+ c.action_to_len16 = htonl(FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) |
+ FW_LEN16(c));
+ c.u.l1cfg.rcap = htonl(FW_PORT_CAP_ANEG);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_set_vlan_accel - configure HW VLAN extraction
+ * @adap: the adapter
+ * @ports: bitmap of adapter ports to operate on
+ * @on: enable (1) or disable (0) HW VLAN extraction
+ *
+ * Enables or disables HW extraction of VLAN tags for the ports specified
+ * by @ports. @ports is a bitmap with the ith bit designating the port
+ * associated with the ith adapter channel.
+ */
+void t4_set_vlan_accel(struct adapter *adap, unsigned int ports, int on)
+{
+ ports <<= VLANEXTENABLE_SHIFT;
+ t4_set_reg_field(adap, TP_OUT_CONFIG, ports, on ? ports : 0);
+}
+
+struct intr_info {
+ unsigned int mask; /* bits to check in interrupt status */
+ const char *msg; /* message to print or NULL */
+ short stat_idx; /* stat counter to increment or -1 */
+ unsigned short fatal; /* whether the condition reported is fatal */
+};
+
+/**
+ * t4_handle_intr_status - table driven interrupt handler
+ * @adapter: the adapter that generated the interrupt
+ * @reg: the interrupt status register to process
+ * @acts: table of interrupt actions
+ *
+ * A table driven interrupt handler that applies a set of masks to an
+ * interrupt status word and performs the corresponding actions if the
+ * interrupts described by the mask have occured. The actions include
+ * optionally emitting a warning or alert message. The table is terminated
+ * by an entry specifying mask 0. Returns the number of fatal interrupt
+ * conditions.
+ */
+static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg,
+ const struct intr_info *acts)
+{
+ int fatal = 0;
+ unsigned int mask = 0;
+ unsigned int status = t4_read_reg(adapter, reg);
+
+ for ( ; acts->mask; ++acts) {
+ if (!(status & acts->mask))
+ continue;
+ if (acts->fatal) {
+ fatal++;
+ dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
+ status & acts->mask);
+ } else if (acts->msg && printk_ratelimit())
+ dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
+ status & acts->mask);
+ mask |= acts->mask;
+ }
+ status &= mask;
+ if (status) /* clear processed interrupts */
+ t4_write_reg(adapter, reg, status);
+ return fatal;
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void pcie_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info sysbus_intr_info[] = {
+ { RNPP, "RXNP array parity error", -1, 1 },
+ { RPCP, "RXPC array parity error", -1, 1 },
+ { RCIP, "RXCIF array parity error", -1, 1 },
+ { RCCP, "Rx completions control array parity error", -1, 1 },
+ { RFTP, "RXFT array parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info pcie_port_intr_info[] = {
+ { TPCP, "TXPC array parity error", -1, 1 },
+ { TNPP, "TXNP array parity error", -1, 1 },
+ { TFTP, "TXFT array parity error", -1, 1 },
+ { TCAP, "TXCA array parity error", -1, 1 },
+ { TCIP, "TXCIF array parity error", -1, 1 },
+ { RCAP, "RXCA array parity error", -1, 1 },
+ { OTDD, "outbound request TLP discarded", -1, 1 },
+ { RDPE, "Rx data parity error", -1, 1 },
+ { TDUE, "Tx uncorrectable data error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info pcie_intr_info[] = {
+ { MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
+ { MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
+ { MSIDATAPERR, "MSI data parity error", -1, 1 },
+ { MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 },
+ { MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 },
+ { MSIXDATAPERR, "MSI-X data parity error", -1, 1 },
+ { MSIXDIPERR, "MSI-X DI parity error", -1, 1 },
+ { PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 },
+ { PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 },
+ { TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 },
+ { CCNTPERR, "PCI CMD channel count parity error", -1, 1 },
+ { CREQPERR, "PCI CMD channel request parity error", -1, 1 },
+ { CRSPPERR, "PCI CMD channel response parity error", -1, 1 },
+ { DCNTPERR, "PCI DMA channel count parity error", -1, 1 },
+ { DREQPERR, "PCI DMA channel request parity error", -1, 1 },
+ { DRSPPERR, "PCI DMA channel response parity error", -1, 1 },
+ { HCNTPERR, "PCI HMA channel count parity error", -1, 1 },
+ { HREQPERR, "PCI HMA channel request parity error", -1, 1 },
+ { HRSPPERR, "PCI HMA channel response parity error", -1, 1 },
+ { CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 },
+ { FIDPERR, "PCI FID parity error", -1, 1 },
+ { INTXCLRPERR, "PCI INTx clear parity error", -1, 1 },
+ { MATAGPERR, "PCI MA tag parity error", -1, 1 },
+ { PIOTAGPERR, "PCI PIO tag parity error", -1, 1 },
+ { RXCPLPERR, "PCI Rx completion parity error", -1, 1 },
+ { RXWRPERR, "PCI Rx write parity error", -1, 1 },
+ { RPLPERR, "PCI replay buffer parity error", -1, 1 },
+ { PCIESINT, "PCI core secondary fault", -1, 1 },
+ { PCIEPINT, "PCI core primary fault", -1, 1 },
+ { UNXSPLCPLERR, "PCI unexpected split completion error", -1, 0 },
+ { 0 }
+ };
+
+ int fat;
+
+ fat = t4_handle_intr_status(adapter,
+ PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
+ sysbus_intr_info) +
+ t4_handle_intr_status(adapter,
+ PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
+ pcie_port_intr_info) +
+ t4_handle_intr_status(adapter, PCIE_INT_CAUSE, pcie_intr_info);
+ if (fat)
+ t4_fatal_err(adapter);
+}
+
+/*
+ * TP interrupt handler.
+ */
+static void tp_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info tp_intr_info[] = {
+ { 0x3fffffff, "TP parity error", -1, 1 },
+ { FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adapter, TP_INT_CAUSE, tp_intr_info))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * SGE interrupt handler.
+ */
+static void sge_intr_handler(struct adapter *adapter)
+{
+ u64 v;
+
+ static struct intr_info sge_intr_info[] = {
+ { ERR_CPL_EXCEED_IQE_SIZE,
+ "SGE received CPL exceeding IQE size", -1, 1 },
+ { ERR_INVALID_CIDX_INC,
+ "SGE GTS CIDX increment too large", -1, 0 },
+ { ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 },
+ { ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 },
+ { ERR_DATA_CPL_ON_HIGH_QID1 | ERR_DATA_CPL_ON_HIGH_QID0,
+ "SGE IQID > 1023 received CPL for FL", -1, 0 },
+ { ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1,
+ 0 },
+ { ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1,
+ 0 },
+ { ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1,
+ 0 },
+ { ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1,
+ 0 },
+ { ERR_ING_CTXT_PRIO,
+ "SGE too many priority ingress contexts", -1, 0 },
+ { ERR_EGR_CTXT_PRIO,
+ "SGE too many priority egress contexts", -1, 0 },
+ { INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 },
+ { EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 },
+ { 0 }
+ };
+
+ v = (u64)t4_read_reg(adapter, SGE_INT_CAUSE1) |
+ ((u64)t4_read_reg(adapter, SGE_INT_CAUSE2) << 32);
+ if (v) {
+ dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n",
+ (unsigned long long)v);
+ t4_write_reg(adapter, SGE_INT_CAUSE1, v);
+ t4_write_reg(adapter, SGE_INT_CAUSE2, v >> 32);
+ }
+
+ if (t4_handle_intr_status(adapter, SGE_INT_CAUSE3, sge_intr_info) ||
+ v != 0)
+ t4_fatal_err(adapter);
+}
+
+/*
+ * CIM interrupt handler.
+ */
+static void cim_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info cim_intr_info[] = {
+ { PREFDROPINT, "CIM control register prefetch drop", -1, 1 },
+ { OBQPARERR, "CIM OBQ parity error", -1, 1 },
+ { IBQPARERR, "CIM IBQ parity error", -1, 1 },
+ { MBUPPARERR, "CIM mailbox uP parity error", -1, 1 },
+ { MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 },
+ { TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 },
+ { TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info cim_upintr_info[] = {
+ { RSVDSPACEINT, "CIM reserved space access", -1, 1 },
+ { ILLTRANSINT, "CIM illegal transaction", -1, 1 },
+ { ILLWRINT, "CIM illegal write", -1, 1 },
+ { ILLRDINT, "CIM illegal read", -1, 1 },
+ { ILLRDBEINT, "CIM illegal read BE", -1, 1 },
+ { ILLWRBEINT, "CIM illegal write BE", -1, 1 },
+ { SGLRDBOOTINT, "CIM single read from boot space", -1, 1 },
+ { SGLWRBOOTINT, "CIM single write to boot space", -1, 1 },
+ { BLKWRBOOTINT, "CIM block write to boot space", -1, 1 },
+ { SGLRDFLASHINT, "CIM single read from flash space", -1, 1 },
+ { SGLWRFLASHINT, "CIM single write to flash space", -1, 1 },
+ { BLKWRFLASHINT, "CIM block write to flash space", -1, 1 },
+ { SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 },
+ { SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 },
+ { BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 },
+ { BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 },
+ { SGLRDCTLINT , "CIM single read from CTL space", -1, 1 },
+ { SGLWRCTLINT , "CIM single write to CTL space", -1, 1 },
+ { BLKRDCTLINT , "CIM block read from CTL space", -1, 1 },
+ { BLKWRCTLINT , "CIM block write to CTL space", -1, 1 },
+ { SGLRDPLINT , "CIM single read from PL space", -1, 1 },
+ { SGLWRPLINT , "CIM single write to PL space", -1, 1 },
+ { BLKRDPLINT , "CIM block read from PL space", -1, 1 },
+ { BLKWRPLINT , "CIM block write to PL space", -1, 1 },
+ { REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 },
+ { RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 },
+ { TIMEOUTINT , "CIM PIF timeout", -1, 1 },
+ { TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 },
+ { 0 }
+ };
+
+ int fat;
+
+ fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE,
+ cim_intr_info) +
+ t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE,
+ cim_upintr_info);
+ if (fat)
+ t4_fatal_err(adapter);
+}
+
+/*
+ * ULP RX interrupt handler.
+ */
+static void ulprx_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info ulprx_intr_info[] = {
+ { 0x7fffff, "ULPRX parity error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE, ulprx_intr_info))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * ULP TX interrupt handler.
+ */
+static void ulptx_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info ulptx_intr_info[] = {
+ { PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1,
+ 0 },
+ { PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1,
+ 0 },
+ { PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1,
+ 0 },
+ { PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1,
+ 0 },
+ { 0xfffffff, "ULPTX parity error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE, ulptx_intr_info))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * PM TX interrupt handler.
+ */
+static void pmtx_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info pmtx_intr_info[] = {
+ { PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 },
+ { PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 },
+ { PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 },
+ { ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 },
+ { PMTX_FRAMING_ERROR, "PMTX framing error", -1, 1 },
+ { OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 },
+ { DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1, 1 },
+ { ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 },
+ { C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1},
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE, pmtx_intr_info))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * PM RX interrupt handler.
+ */
+static void pmrx_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info pmrx_intr_info[] = {
+ { ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 },
+ { PMRX_FRAMING_ERROR, "PMRX framing error", -1, 1 },
+ { OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 },
+ { DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1, 1 },
+ { IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 },
+ { E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1},
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE, pmrx_intr_info))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * CPL switch interrupt handler.
+ */
+static void cplsw_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info cplsw_intr_info[] = {
+ { CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 },
+ { CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 },
+ { TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 },
+ { SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 },
+ { CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 },
+ { ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE, cplsw_intr_info))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * LE interrupt handler.
+ */
+static void le_intr_handler(struct adapter *adap)
+{
+ static struct intr_info le_intr_info[] = {
+ { LIPMISS, "LE LIP miss", -1, 0 },
+ { LIP0, "LE 0 LIP error", -1, 0 },
+ { PARITYERR, "LE parity error", -1, 1 },
+ { UNKNOWNCMD, "LE unknown command", -1, 1 },
+ { REQQPARERR, "LE request queue parity error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE, le_intr_info))
+ t4_fatal_err(adap);
+}
+
+/*
+ * MPS interrupt handler.
+ */
+static void mps_intr_handler(struct adapter *adapter)
+{
+ static struct intr_info mps_rx_intr_info[] = {
+ { 0xffffff, "MPS Rx parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info mps_tx_intr_info[] = {
+ { TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 },
+ { NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 },
+ { TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 },
+ { TXDESCFIFO, "MPS Tx desc FIFO parity error", -1, 1 },
+ { BUBBLE, "MPS Tx underflow", -1, 1 },
+ { SECNTERR, "MPS Tx SOP/EOP error", -1, 1 },
+ { FRMERR, "MPS Tx framing error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info mps_trc_intr_info[] = {
+ { FILTMEM, "MPS TRC filter parity error", -1, 1 },
+ { PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 },
+ { MISCPERR, "MPS TRC misc parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info mps_stat_sram_intr_info[] = {
+ { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info mps_stat_tx_intr_info[] = {
+ { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info mps_stat_rx_intr_info[] = {
+ { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
+ { 0 }
+ };
+ static struct intr_info mps_cls_intr_info[] = {
+ { MATCHSRAM, "MPS match SRAM parity error", -1, 1 },
+ { MATCHTCAM, "MPS match TCAM parity error", -1, 1 },
+ { HASHSRAM, "MPS hash SRAM parity error", -1, 1 },
+ { 0 }
+ };
+
+ int fat;
+
+ fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE,
+ mps_rx_intr_info) +
+ t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE,
+ mps_tx_intr_info) +
+ t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE,
+ mps_trc_intr_info) +
+ t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM,
+ mps_stat_sram_intr_info) +
+ t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO,
+ mps_stat_tx_intr_info) +
+ t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO,
+ mps_stat_rx_intr_info) +
+ t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE,
+ mps_cls_intr_info);
+
+ t4_write_reg(adapter, MPS_INT_CAUSE, CLSINT | TRCINT |
+ RXINT | TXINT | STATINT);
+ t4_read_reg(adapter, MPS_INT_CAUSE); /* flush */
+ if (fat)
+ t4_fatal_err(adapter);
+}
+
+#define MEM_INT_MASK (PERR_INT_CAUSE | ECC_CE_INT_CAUSE | ECC_UE_INT_CAUSE)
+
+/*
+ * EDC/MC interrupt handler.
+ */
+static void mem_intr_handler(struct adapter *adapter, int idx)
+{
+ static const char name[3][5] = { "EDC0", "EDC1", "MC" };
+
+ unsigned int addr, cnt_addr, v;
+
+ if (idx <= MEM_EDC1) {
+ addr = EDC_REG(EDC_INT_CAUSE, idx);
+ cnt_addr = EDC_REG(EDC_ECC_STATUS, idx);
+ } else {
+ addr = MC_INT_CAUSE;
+ cnt_addr = MC_ECC_STATUS;
+ }
+
+ v = t4_read_reg(adapter, addr) & MEM_INT_MASK;
+ if (v & PERR_INT_CAUSE)
+ dev_alert(adapter->pdev_dev, "%s FIFO parity error\n",
+ name[idx]);
+ if (v & ECC_CE_INT_CAUSE) {
+ u32 cnt = ECC_CECNT_GET(t4_read_reg(adapter, cnt_addr));
+
+ t4_write_reg(adapter, cnt_addr, ECC_CECNT_MASK);
+ if (printk_ratelimit())
+ dev_warn(adapter->pdev_dev,
+ "%u %s correctable ECC data error%s\n",
+ cnt, name[idx], cnt > 1 ? "s" : "");
+ }
+ if (v & ECC_UE_INT_CAUSE)
+ dev_alert(adapter->pdev_dev,
+ "%s uncorrectable ECC data error\n", name[idx]);
+
+ t4_write_reg(adapter, addr, v);
+ if (v & (PERR_INT_CAUSE | ECC_UE_INT_CAUSE))
+ t4_fatal_err(adapter);
+}
+
+/*
+ * MA interrupt handler.
+ */
+static void ma_intr_handler(struct adapter *adap)
+{
+ u32 v, status = t4_read_reg(adap, MA_INT_CAUSE);
+
+ if (status & MEM_PERR_INT_CAUSE)
+ dev_alert(adap->pdev_dev,
+ "MA parity error, parity status %#x\n",
+ t4_read_reg(adap, MA_PARITY_ERROR_STATUS));
+ if (status & MEM_WRAP_INT_CAUSE) {
+ v = t4_read_reg(adap, MA_INT_WRAP_STATUS);
+ dev_alert(adap->pdev_dev, "MA address wrap-around error by "
+ "client %u to address %#x\n",
+ MEM_WRAP_CLIENT_NUM_GET(v),
+ MEM_WRAP_ADDRESS_GET(v) << 4);
+ }
+ t4_write_reg(adap, MA_INT_CAUSE, status);
+ t4_fatal_err(adap);
+}
+
+/*
+ * SMB interrupt handler.
+ */
+static void smb_intr_handler(struct adapter *adap)
+{
+ static struct intr_info smb_intr_info[] = {
+ { MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 },
+ { MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 },
+ { SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adap, SMB_INT_CAUSE, smb_intr_info))
+ t4_fatal_err(adap);
+}
+
+/*
+ * NC-SI interrupt handler.
+ */
+static void ncsi_intr_handler(struct adapter *adap)
+{
+ static struct intr_info ncsi_intr_info[] = {
+ { CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 },
+ { MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 },
+ { TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 },
+ { RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adap, NCSI_INT_CAUSE, ncsi_intr_info))
+ t4_fatal_err(adap);
+}
+
+/*
+ * XGMAC interrupt handler.
+ */
+static void xgmac_intr_handler(struct adapter *adap, int port)
+{
+ u32 v = t4_read_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE));
+
+ v &= TXFIFO_PRTY_ERR | RXFIFO_PRTY_ERR;
+ if (!v)
+ return;
+
+ if (v & TXFIFO_PRTY_ERR)
+ dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n",
+ port);
+ if (v & RXFIFO_PRTY_ERR)
+ dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n",
+ port);
+ t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE), v);
+ t4_fatal_err(adap);
+}
+
+/*
+ * PL interrupt handler.
+ */
+static void pl_intr_handler(struct adapter *adap)
+{
+ static struct intr_info pl_intr_info[] = {
+ { FATALPERR, "T4 fatal parity error", -1, 1 },
+ { PERRVFID, "PL VFID_MAP parity error", -1, 1 },
+ { 0 }
+ };
+
+ if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE, pl_intr_info))
+ t4_fatal_err(adap);
+}
+
+#define PF_INTR_MASK (PFSW | PFCIM)
+#define GLBL_INTR_MASK (CIM | MPS | PL | PCIE | MC | EDC0 | \
+ EDC1 | LE | TP | MA | PM_TX | PM_RX | ULP_RX | \
+ CPL_SWITCH | SGE | ULP_TX)
+
+/**
+ * t4_slow_intr_handler - control path interrupt handler
+ * @adapter: the adapter
+ *
+ * T4 interrupt handler for non-data global interrupt events, e.g., errors.
+ * The designation 'slow' is because it involves register reads, while
+ * data interrupts typically don't involve any MMIOs.
+ */
+int t4_slow_intr_handler(struct adapter *adapter)
+{
+ u32 cause = t4_read_reg(adapter, PL_INT_CAUSE);
+
+ if (!(cause & GLBL_INTR_MASK))
+ return 0;
+ if (cause & CIM)
+ cim_intr_handler(adapter);
+ if (cause & MPS)
+ mps_intr_handler(adapter);
+ if (cause & NCSI)
+ ncsi_intr_handler(adapter);
+ if (cause & PL)
+ pl_intr_handler(adapter);
+ if (cause & SMB)
+ smb_intr_handler(adapter);
+ if (cause & XGMAC0)
+ xgmac_intr_handler(adapter, 0);
+ if (cause & XGMAC1)
+ xgmac_intr_handler(adapter, 1);
+ if (cause & XGMAC_KR0)
+ xgmac_intr_handler(adapter, 2);
+ if (cause & XGMAC_KR1)
+ xgmac_intr_handler(adapter, 3);
+ if (cause & PCIE)
+ pcie_intr_handler(adapter);
+ if (cause & MC)
+ mem_intr_handler(adapter, MEM_MC);
+ if (cause & EDC0)
+ mem_intr_handler(adapter, MEM_EDC0);
+ if (cause & EDC1)
+ mem_intr_handler(adapter, MEM_EDC1);
+ if (cause & LE)
+ le_intr_handler(adapter);
+ if (cause & TP)
+ tp_intr_handler(adapter);
+ if (cause & MA)
+ ma_intr_handler(adapter);
+ if (cause & PM_TX)
+ pmtx_intr_handler(adapter);
+ if (cause & PM_RX)
+ pmrx_intr_handler(adapter);
+ if (cause & ULP_RX)
+ ulprx_intr_handler(adapter);
+ if (cause & CPL_SWITCH)
+ cplsw_intr_handler(adapter);
+ if (cause & SGE)
+ sge_intr_handler(adapter);
+ if (cause & ULP_TX)
+ ulptx_intr_handler(adapter);
+
+ /* Clear the interrupts just processed for which we are the master. */
+ t4_write_reg(adapter, PL_INT_CAUSE, cause & GLBL_INTR_MASK);
+ (void) t4_read_reg(adapter, PL_INT_CAUSE); /* flush */
+ return 1;
+}
+
+/**
+ * t4_intr_enable - enable interrupts
+ * @adapter: the adapter whose interrupts should be enabled
+ *
+ * Enable PF-specific interrupts for the calling function and the top-level
+ * interrupt concentrator for global interrupts. Interrupts are already
+ * enabled at each module, here we just enable the roots of the interrupt
+ * hierarchies.
+ *
+ * Note: this function should be called only when the driver manages
+ * non PF-specific interrupts from the various HW modules. Only one PCI
+ * function at a time should be doing this.
+ */
+void t4_intr_enable(struct adapter *adapter)
+{
+ u32 pf = SOURCEPF_GET(t4_read_reg(adapter, PL_WHOAMI));
+
+ t4_write_reg(adapter, SGE_INT_ENABLE3, ERR_CPL_EXCEED_IQE_SIZE |
+ ERR_INVALID_CIDX_INC | ERR_CPL_OPCODE_0 |
+ ERR_DROPPED_DB | ERR_DATA_CPL_ON_HIGH_QID1 |
+ ERR_DATA_CPL_ON_HIGH_QID0 | ERR_BAD_DB_PIDX3 |
+ ERR_BAD_DB_PIDX2 | ERR_BAD_DB_PIDX1 |
+ ERR_BAD_DB_PIDX0 | ERR_ING_CTXT_PRIO |
+ ERR_EGR_CTXT_PRIO | INGRESS_SIZE_ERR |
+ EGRESS_SIZE_ERR);
+ t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), PF_INTR_MASK);
+ t4_set_reg_field(adapter, PL_INT_MAP0, 0, 1 << pf);
+}
+
+/**
+ * t4_intr_disable - disable interrupts
+ * @adapter: the adapter whose interrupts should be disabled
+ *
+ * Disable interrupts. We only disable the top-level interrupt
+ * concentrators. The caller must be a PCI function managing global
+ * interrupts.
+ */
+void t4_intr_disable(struct adapter *adapter)
+{
+ u32 pf = SOURCEPF_GET(t4_read_reg(adapter, PL_WHOAMI));
+
+ t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE), 0);
+ t4_set_reg_field(adapter, PL_INT_MAP0, 1 << pf, 0);
+}
+
+/**
+ * t4_intr_clear - clear all interrupts
+ * @adapter: the adapter whose interrupts should be cleared
+ *
+ * Clears all interrupts. The caller must be a PCI function managing
+ * global interrupts.
+ */
+void t4_intr_clear(struct adapter *adapter)
+{
+ static const unsigned int cause_reg[] = {
+ SGE_INT_CAUSE1, SGE_INT_CAUSE2, SGE_INT_CAUSE3,
+ PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS,
+ PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS,
+ PCIE_NONFAT_ERR, PCIE_INT_CAUSE,
+ MC_INT_CAUSE,
+ MA_INT_WRAP_STATUS, MA_PARITY_ERROR_STATUS, MA_INT_CAUSE,
+ EDC_INT_CAUSE, EDC_REG(EDC_INT_CAUSE, 1),
+ CIM_HOST_INT_CAUSE, CIM_HOST_UPACC_INT_CAUSE,
+ MYPF_REG(CIM_PF_HOST_INT_CAUSE),
+ TP_INT_CAUSE,
+ ULP_RX_INT_CAUSE, ULP_TX_INT_CAUSE,
+ PM_RX_INT_CAUSE, PM_TX_INT_CAUSE,
+ MPS_RX_PERR_INT_CAUSE,
+ CPL_INTR_CAUSE,
+ MYPF_REG(PL_PF_INT_CAUSE),
+ PL_PL_INT_CAUSE,
+ LE_DB_INT_CAUSE,
+ };
+
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(cause_reg); ++i)
+ t4_write_reg(adapter, cause_reg[i], 0xffffffff);
+
+ t4_write_reg(adapter, PL_INT_CAUSE, GLBL_INTR_MASK);
+ (void) t4_read_reg(adapter, PL_INT_CAUSE); /* flush */
+}
+
+/**
+ * hash_mac_addr - return the hash value of a MAC address
+ * @addr: the 48-bit Ethernet MAC address
+ *
+ * Hashes a MAC address according to the hash function used by HW inexact
+ * (hash) address matching.
+ */
+static int hash_mac_addr(const u8 *addr)
+{
+ u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2];
+ u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5];
+ a ^= b;
+ a ^= (a >> 12);
+ a ^= (a >> 6);
+ return a & 0x3f;
+}
+
+/**
+ * t4_config_rss_range - configure a portion of the RSS mapping table
+ * @adapter: the adapter
+ * @mbox: mbox to use for the FW command
+ * @viid: virtual interface whose RSS subtable is to be written
+ * @start: start entry in the table to write
+ * @n: how many table entries to write
+ * @rspq: values for the response queue lookup table
+ * @nrspq: number of values in @rspq
+ *
+ * Programs the selected part of the VI's RSS mapping table with the
+ * provided values. If @nrspq < @n the supplied values are used repeatedly
+ * until the full table range is populated.
+ *
+ * The caller must ensure the values in @rspq are in the range allowed for
+ * @viid.
+ */
+int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
+ int start, int n, const u16 *rspq, unsigned int nrspq)
+{
+ int ret;
+ const u16 *rsp = rspq;
+ const u16 *rsp_end = rspq + nrspq;
+ struct fw_rss_ind_tbl_cmd cmd;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_viid = htonl(FW_CMD_OP(FW_RSS_IND_TBL_CMD) |
+ FW_CMD_REQUEST | FW_CMD_WRITE |
+ FW_RSS_IND_TBL_CMD_VIID(viid));
+ cmd.retval_len16 = htonl(FW_LEN16(cmd));
+
+ /* each fw_rss_ind_tbl_cmd takes up to 32 entries */
+ while (n > 0) {
+ int nq = min(n, 32);
+ __be32 *qp = &cmd.iq0_to_iq2;
+
+ cmd.niqid = htons(nq);
+ cmd.startidx = htons(start);
+
+ start += nq;
+ n -= nq;
+
+ while (nq > 0) {
+ unsigned int v;
+
+ v = FW_RSS_IND_TBL_CMD_IQ0(*rsp);
+ if (++rsp >= rsp_end)
+ rsp = rspq;
+ v |= FW_RSS_IND_TBL_CMD_IQ1(*rsp);
+ if (++rsp >= rsp_end)
+ rsp = rspq;
+ v |= FW_RSS_IND_TBL_CMD_IQ2(*rsp);
+ if (++rsp >= rsp_end)
+ rsp = rspq;
+
+ *qp++ = htonl(v);
+ nq -= 3;
+ }
+
+ ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+/**
+ * t4_config_glbl_rss - configure the global RSS mode
+ * @adapter: the adapter
+ * @mbox: mbox to use for the FW command
+ * @mode: global RSS mode
+ * @flags: mode-specific flags
+ *
+ * Sets the global RSS mode.
+ */
+int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode,
+ unsigned int flags)
+{
+ struct fw_rss_glb_config_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_write = htonl(FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) |
+ FW_CMD_REQUEST | FW_CMD_WRITE);
+ c.retval_len16 = htonl(FW_LEN16(c));
+ if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) {
+ c.u.manual.mode_pkd = htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode));
+ } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
+ c.u.basicvirtual.mode_pkd =
+ htonl(FW_RSS_GLB_CONFIG_CMD_MODE(mode));
+ c.u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags);
+ } else
+ return -EINVAL;
+ return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
+}
+
+/* Read an RSS table row */
+static int rd_rss_row(struct adapter *adap, int row, u32 *val)
+{
+ t4_write_reg(adap, TP_RSS_LKP_TABLE, 0xfff00000 | row);
+ return t4_wait_op_done_val(adap, TP_RSS_LKP_TABLE, LKPTBLROWVLD, 1,
+ 5, 0, val);
+}
+
+/**
+ * t4_read_rss - read the contents of the RSS mapping table
+ * @adapter: the adapter
+ * @map: holds the contents of the RSS mapping table
+ *
+ * Reads the contents of the RSS hash->queue mapping table.
+ */
+int t4_read_rss(struct adapter *adapter, u16 *map)
+{
+ u32 val;
+ int i, ret;
+
+ for (i = 0; i < RSS_NENTRIES / 2; ++i) {
+ ret = rd_rss_row(adapter, i, &val);
+ if (ret)
+ return ret;
+ *map++ = LKPTBLQUEUE0_GET(val);
+ *map++ = LKPTBLQUEUE1_GET(val);
+ }
+ return 0;
+}
+
+/**
+ * t4_tp_get_tcp_stats - read TP's TCP MIB counters
+ * @adap: the adapter
+ * @v4: holds the TCP/IP counter values
+ * @v6: holds the TCP/IPv6 counter values
+ *
+ * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters.
+ * Either @v4 or @v6 may be %NULL to skip the corresponding stats.
+ */
+void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
+ struct tp_tcp_stats *v6)
+{
+ u32 val[TP_MIB_TCP_RXT_SEG_LO - TP_MIB_TCP_OUT_RST + 1];
+
+#define STAT_IDX(x) ((TP_MIB_TCP_##x) - TP_MIB_TCP_OUT_RST)
+#define STAT(x) val[STAT_IDX(x)]
+#define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO))
+
+ if (v4) {
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, val,
+ ARRAY_SIZE(val), TP_MIB_TCP_OUT_RST);
+ v4->tcpOutRsts = STAT(OUT_RST);
+ v4->tcpInSegs = STAT64(IN_SEG);
+ v4->tcpOutSegs = STAT64(OUT_SEG);
+ v4->tcpRetransSegs = STAT64(RXT_SEG);
+ }
+ if (v6) {
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, val,
+ ARRAY_SIZE(val), TP_MIB_TCP_V6OUT_RST);
+ v6->tcpOutRsts = STAT(OUT_RST);
+ v6->tcpInSegs = STAT64(IN_SEG);
+ v6->tcpOutSegs = STAT64(OUT_SEG);
+ v6->tcpRetransSegs = STAT64(RXT_SEG);
+ }
+#undef STAT64
+#undef STAT
+#undef STAT_IDX
+}
+
+/**
+ * t4_tp_get_err_stats - read TP's error MIB counters
+ * @adap: the adapter
+ * @st: holds the counter values
+ *
+ * Returns the values of TP's error counters.
+ */
+void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st)
+{
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, st->macInErrs,
+ 12, TP_MIB_MAC_IN_ERR_0);
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, st->tnlCongDrops,
+ 8, TP_MIB_TNL_CNG_DROP_0);
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, st->tnlTxDrops,
+ 4, TP_MIB_TNL_DROP_0);
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, st->ofldVlanDrops,
+ 4, TP_MIB_OFD_VLN_DROP_0);
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, st->tcp6InErrs,
+ 4, TP_MIB_TCP_V6IN_ERR_0);
+ t4_read_indirect(adap, TP_MIB_INDEX, TP_MIB_DATA, &st->ofldNoNeigh,
+ 2, TP_MIB_OFD_ARP_DROP);
+}
+
+/**
+ * t4_read_mtu_tbl - returns the values in the HW path MTU table
+ * @adap: the adapter
+ * @mtus: where to store the MTU values
+ * @mtu_log: where to store the MTU base-2 log (may be %NULL)
+ *
+ * Reads the HW path MTU table.
+ */
+void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
+{
+ u32 v;
+ int i;
+
+ for (i = 0; i < NMTUS; ++i) {
+ t4_write_reg(adap, TP_MTU_TABLE,
+ MTUINDEX(0xff) | MTUVALUE(i));
+ v = t4_read_reg(adap, TP_MTU_TABLE);
+ mtus[i] = MTUVALUE_GET(v);
+ if (mtu_log)
+ mtu_log[i] = MTUWIDTH_GET(v);
+ }
+}
+
+/**
+ * init_cong_ctrl - initialize congestion control parameters
+ * @a: the alpha values for congestion control
+ * @b: the beta values for congestion control
+ *
+ * Initialize the congestion control parameters.
+ */
+static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b)
+{
+ a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
+ a[9] = 2;
+ a[10] = 3;
+ a[11] = 4;
+ a[12] = 5;
+ a[13] = 6;
+ a[14] = 7;
+ a[15] = 8;
+ a[16] = 9;
+ a[17] = 10;
+ a[18] = 14;
+ a[19] = 17;
+ a[20] = 21;
+ a[21] = 25;
+ a[22] = 30;
+ a[23] = 35;
+ a[24] = 45;
+ a[25] = 60;
+ a[26] = 80;
+ a[27] = 100;
+ a[28] = 200;
+ a[29] = 300;
+ a[30] = 400;
+ a[31] = 500;
+
+ b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
+ b[9] = b[10] = 1;
+ b[11] = b[12] = 2;
+ b[13] = b[14] = b[15] = b[16] = 3;
+ b[17] = b[18] = b[19] = b[20] = b[21] = 4;
+ b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
+ b[28] = b[29] = 6;
+ b[30] = b[31] = 7;
+}
+
+/* The minimum additive increment value for the congestion control table */
+#define CC_MIN_INCR 2U
+
+/**
+ * t4_load_mtus - write the MTU and congestion control HW tables
+ * @adap: the adapter
+ * @mtus: the values for the MTU table
+ * @alpha: the values for the congestion control alpha parameter
+ * @beta: the values for the congestion control beta parameter
+ *
+ * Write the HW MTU table with the supplied MTUs and the high-speed
+ * congestion control table with the supplied alpha, beta, and MTUs.
+ * We write the two tables together because the additive increments
+ * depend on the MTUs.
+ */
+void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
+ const unsigned short *alpha, const unsigned short *beta)
+{
+ static const unsigned int avg_pkts[NCCTRL_WIN] = {
+ 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
+ 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
+ 28672, 40960, 57344, 81920, 114688, 163840, 229376
+ };
+
+ unsigned int i, w;
+
+ for (i = 0; i < NMTUS; ++i) {
+ unsigned int mtu = mtus[i];
+ unsigned int log2 = fls(mtu);
+
+ if (!(mtu & ((1 << log2) >> 2))) /* round */
+ log2--;
+ t4_write_reg(adap, TP_MTU_TABLE, MTUINDEX(i) |
+ MTUWIDTH(log2) | MTUVALUE(mtu));
+
+ for (w = 0; w < NCCTRL_WIN; ++w) {
+ unsigned int inc;
+
+ inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
+ CC_MIN_INCR);
+
+ t4_write_reg(adap, TP_CCTRL_TABLE, (i << 21) |
+ (w << 16) | (beta[w] << 13) | inc);
+ }
+ }
+}
+
+/**
+ * t4_set_trace_filter - configure one of the tracing filters
+ * @adap: the adapter
+ * @tp: the desired trace filter parameters
+ * @idx: which filter to configure
+ * @enable: whether to enable or disable the filter
+ *
+ * Configures one of the tracing filters available in HW. If @enable is
+ * %0 @tp is not examined and may be %NULL.
+ */
+int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp,
+ int idx, int enable)
+{
+ int i, ofst = idx * 4;
+ u32 data_reg, mask_reg, cfg;
+ u32 multitrc = TRCMULTIFILTER;
+
+ if (!enable) {
+ t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + ofst, 0);
+ goto out;
+ }
+
+ if (tp->port > 11 || tp->invert > 1 || tp->skip_len > 0x1f ||
+ tp->skip_ofst > 0x1f || tp->min_len > 0x1ff ||
+ tp->snap_len > 9600 || (idx && tp->snap_len > 256))
+ return -EINVAL;
+
+ if (tp->snap_len > 256) { /* must be tracer 0 */
+ if ((t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + 4) |
+ t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + 8) |
+ t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + 12)) & TFEN)
+ return -EINVAL; /* other tracers are enabled */
+ multitrc = 0;
+ } else if (idx) {
+ i = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B);
+ if (TFCAPTUREMAX_GET(i) > 256 &&
+ (t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A) & TFEN))
+ return -EINVAL;
+ }
+
+ /* stop the tracer we'll be changing */
+ t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + ofst, 0);
+
+ /* disable tracing globally if running in the wrong single/multi mode */
+ cfg = t4_read_reg(adap, MPS_TRC_CFG);
+ if ((cfg & TRCEN) && multitrc != (cfg & TRCMULTIFILTER)) {
+ t4_write_reg(adap, MPS_TRC_CFG, cfg ^ TRCEN);
+ t4_read_reg(adap, MPS_TRC_CFG); /* flush */
+ msleep(1);
+ if (!(t4_read_reg(adap, MPS_TRC_CFG) & TRCFIFOEMPTY))
+ return -ETIMEDOUT;
+ }
+ /*
+ * At this point either the tracing is enabled and in the right mode or
+ * disabled.
+ */
+
+ idx *= (MPS_TRC_FILTER1_MATCH - MPS_TRC_FILTER0_MATCH);
+ data_reg = MPS_TRC_FILTER0_MATCH + idx;
+ mask_reg = MPS_TRC_FILTER0_DONT_CARE + idx;
+
+ for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
+ t4_write_reg(adap, data_reg, tp->data[i]);
+ t4_write_reg(adap, mask_reg, ~tp->mask[i]);
+ }
+ t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B + ofst,
+ TFCAPTUREMAX(tp->snap_len) |
+ TFMINPKTSIZE(tp->min_len));
+ t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + ofst,
+ TFOFFSET(tp->skip_ofst) | TFLENGTH(tp->skip_len) |
+ TFPORT(tp->port) | TFEN |
+ (tp->invert ? TFINVERTMATCH : 0));
+
+ cfg &= ~TRCMULTIFILTER;
+ t4_write_reg(adap, MPS_TRC_CFG, cfg | TRCEN | multitrc);
+out: t4_read_reg(adap, MPS_TRC_CFG); /* flush */
+ return 0;
+}
+
+/**
+ * t4_get_trace_filter - query one of the tracing filters
+ * @adap: the adapter
+ * @tp: the current trace filter parameters
+ * @idx: which trace filter to query
+ * @enabled: non-zero if the filter is enabled
+ *
+ * Returns the current settings of one of the HW tracing filters.
+ */
+void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx,
+ int *enabled)
+{
+ u32 ctla, ctlb;
+ int i, ofst = idx * 4;
+ u32 data_reg, mask_reg;
+
+ ctla = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A + ofst);
+ ctlb = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B + ofst);
+
+ *enabled = !!(ctla & TFEN);
+ tp->snap_len = TFCAPTUREMAX_GET(ctlb);
+ tp->min_len = TFMINPKTSIZE_GET(ctlb);
+ tp->skip_ofst = TFOFFSET_GET(ctla);
+ tp->skip_len = TFLENGTH_GET(ctla);
+ tp->invert = !!(ctla & TFINVERTMATCH);
+ tp->port = TFPORT_GET(ctla);
+
+ ofst = (MPS_TRC_FILTER1_MATCH - MPS_TRC_FILTER0_MATCH) * idx;
+ data_reg = MPS_TRC_FILTER0_MATCH + ofst;
+ mask_reg = MPS_TRC_FILTER0_DONT_CARE + ofst;
+
+ for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
+ tp->mask[i] = ~t4_read_reg(adap, mask_reg);
+ tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i];
+ }
+}
+
+/**
+ * get_mps_bg_map - return the buffer groups associated with a port
+ * @adap: the adapter
+ * @idx: the port index
+ *
+ * Returns a bitmap indicating which MPS buffer groups are associated
+ * with the given port. Bit i is set if buffer group i is used by the
+ * port.
+ */
+static unsigned int get_mps_bg_map(struct adapter *adap, int idx)
+{
+ u32 n = NUMPORTS_GET(t4_read_reg(adap, MPS_CMN_CTL));
+
+ if (n == 0)
+ return idx == 0 ? 0xf : 0;
+ if (n == 1)
+ return idx < 2 ? (3 << (2 * idx)) : 0;
+ return 1 << idx;
+}
+
+/**
+ * t4_get_port_stats - collect port statistics
+ * @adap: the adapter
+ * @idx: the port index
+ * @p: the stats structure to fill
+ *
+ * Collect statistics related to the given port from HW.
+ */
+void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
+{
+ u32 bgmap = get_mps_bg_map(adap, idx);
+
+#define GET_STAT(name) \
+ t4_read_reg64(adap, PORT_REG(idx, MPS_PORT_STAT_##name##_L))
+#define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
+
+ p->tx_octets = GET_STAT(TX_PORT_BYTES);
+ p->tx_frames = GET_STAT(TX_PORT_FRAMES);
+ p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST);
+ p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST);
+ p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST);
+ p->tx_error_frames = GET_STAT(TX_PORT_ERROR);
+ p->tx_frames_64 = GET_STAT(TX_PORT_64B);
+ p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B);
+ p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B);
+ p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B);
+ p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B);
+ p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
+ p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX);
+ p->tx_drop = GET_STAT(TX_PORT_DROP);
+ p->tx_pause = GET_STAT(TX_PORT_PAUSE);
+ p->tx_ppp0 = GET_STAT(TX_PORT_PPP0);
+ p->tx_ppp1 = GET_STAT(TX_PORT_PPP1);
+ p->tx_ppp2 = GET_STAT(TX_PORT_PPP2);
+ p->tx_ppp3 = GET_STAT(TX_PORT_PPP3);
+ p->tx_ppp4 = GET_STAT(TX_PORT_PPP4);
+ p->tx_ppp5 = GET_STAT(TX_PORT_PPP5);
+ p->tx_ppp6 = GET_STAT(TX_PORT_PPP6);
+ p->tx_ppp7 = GET_STAT(TX_PORT_PPP7);
+
+ p->rx_octets = GET_STAT(RX_PORT_BYTES);
+ p->rx_frames = GET_STAT(RX_PORT_FRAMES);
+ p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST);
+ p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST);
+ p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST);
+ p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR);
+ p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR);
+ p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR);
+ p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR);
+ p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR);
+ p->rx_runt = GET_STAT(RX_PORT_LESS_64B);
+ p->rx_frames_64 = GET_STAT(RX_PORT_64B);
+ p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B);
+ p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B);
+ p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B);
+ p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B);
+ p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
+ p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX);
+ p->rx_pause = GET_STAT(RX_PORT_PAUSE);
+ p->rx_ppp0 = GET_STAT(RX_PORT_PPP0);
+ p->rx_ppp1 = GET_STAT(RX_PORT_PPP1);
+ p->rx_ppp2 = GET_STAT(RX_PORT_PPP2);
+ p->rx_ppp3 = GET_STAT(RX_PORT_PPP3);
+ p->rx_ppp4 = GET_STAT(RX_PORT_PPP4);
+ p->rx_ppp5 = GET_STAT(RX_PORT_PPP5);
+ p->rx_ppp6 = GET_STAT(RX_PORT_PPP6);
+ p->rx_ppp7 = GET_STAT(RX_PORT_PPP7);
+
+ p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
+ p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
+ p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
+ p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
+ p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
+ p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
+ p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
+ p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;
+
+#undef GET_STAT
+#undef GET_STAT_COM
+}
+
+/**
+ * t4_get_lb_stats - collect loopback port statistics
+ * @adap: the adapter
+ * @idx: the loopback port index
+ * @p: the stats structure to fill
+ *
+ * Return HW statistics for the given loopback port.
+ */
+void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p)
+{
+ u32 bgmap = get_mps_bg_map(adap, idx);
+
+#define GET_STAT(name) \
+ t4_read_reg64(adap, PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L))
+#define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)
+
+ p->octets = GET_STAT(BYTES);
+ p->frames = GET_STAT(FRAMES);
+ p->bcast_frames = GET_STAT(BCAST);
+ p->mcast_frames = GET_STAT(MCAST);
+ p->ucast_frames = GET_STAT(UCAST);
+ p->error_frames = GET_STAT(ERROR);
+
+ p->frames_64 = GET_STAT(64B);
+ p->frames_65_127 = GET_STAT(65B_127B);
+ p->frames_128_255 = GET_STAT(128B_255B);
+ p->frames_256_511 = GET_STAT(256B_511B);
+ p->frames_512_1023 = GET_STAT(512B_1023B);
+ p->frames_1024_1518 = GET_STAT(1024B_1518B);
+ p->frames_1519_max = GET_STAT(1519B_MAX);
+ p->drop = t4_read_reg(adap, PORT_REG(idx,
+ MPS_PORT_STAT_LB_PORT_DROP_FRAMES));
+
+ p->ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0;
+ p->ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0;
+ p->ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0;
+ p->ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0;
+ p->trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0;
+ p->trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0;
+ p->trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0;
+ p->trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0;
+
+#undef GET_STAT
+#undef GET_STAT_COM
+}
+
+/**
+ * t4_wol_magic_enable - enable/disable magic packet WoL
+ * @adap: the adapter
+ * @port: the physical port index
+ * @addr: MAC address expected in magic packets, %NULL to disable
+ *
+ * Enables/disables magic packet wake-on-LAN for the selected port.
+ */
+void t4_wol_magic_enable(struct adapter *adap, unsigned int port,
+ const u8 *addr)
+{
+ if (addr) {
+ t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_MAGIC_MACID_LO),
+ (addr[2] << 24) | (addr[3] << 16) |
+ (addr[4] << 8) | addr[5]);
+ t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_MAGIC_MACID_HI),
+ (addr[0] << 8) | addr[1]);
+ }
+ t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), MAGICEN,
+ addr ? MAGICEN : 0);
+}
+
+/**
+ * t4_wol_pat_enable - enable/disable pattern-based WoL
+ * @adap: the adapter
+ * @port: the physical port index
+ * @map: bitmap of which HW pattern filters to set
+ * @mask0: byte mask for bytes 0-63 of a packet
+ * @mask1: byte mask for bytes 64-127 of a packet
+ * @crc: Ethernet CRC for selected bytes
+ * @enable: enable/disable switch
+ *
+ * Sets the pattern filters indicated in @map to mask out the bytes
+ * specified in @mask0/@mask1 in received packets and compare the CRC of
+ * the resulting packet against @crc. If @enable is %true pattern-based
+ * WoL is enabled, otherwise disabled.
+ */
+int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map,
+ u64 mask0, u64 mask1, unsigned int crc, bool enable)
+{
+ int i;
+
+ if (!enable) {
+ t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2),
+ PATEN, 0);
+ return 0;
+ }
+ if (map > 0xff)
+ return -EINVAL;
+
+#define EPIO_REG(name) PORT_REG(port, XGMAC_PORT_EPIO_##name)
+
+ t4_write_reg(adap, EPIO_REG(DATA1), mask0 >> 32);
+ t4_write_reg(adap, EPIO_REG(DATA2), mask1);
+ t4_write_reg(adap, EPIO_REG(DATA3), mask1 >> 32);
+
+ for (i = 0; i < NWOL_PAT; i++, map >>= 1) {
+ if (!(map & 1))
+ continue;
+
+ /* write byte masks */
+ t4_write_reg(adap, EPIO_REG(DATA0), mask0);
+ t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i) | EPIOWR);
+ t4_read_reg(adap, EPIO_REG(OP)); /* flush */
+ if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY)
+ return -ETIMEDOUT;
+
+ /* write CRC */
+ t4_write_reg(adap, EPIO_REG(DATA0), crc);
+ t4_write_reg(adap, EPIO_REG(OP), ADDRESS(i + 32) | EPIOWR);
+ t4_read_reg(adap, EPIO_REG(OP)); /* flush */
+ if (t4_read_reg(adap, EPIO_REG(OP)) & BUSY)
+ return -ETIMEDOUT;
+ }
+#undef EPIO_REG
+
+ t4_set_reg_field(adap, PORT_REG(port, XGMAC_PORT_CFG2), 0, PATEN);
+ return 0;
+}
+
+#define INIT_CMD(var, cmd, rd_wr) do { \
+ (var).op_to_write = htonl(FW_CMD_OP(FW_##cmd##_CMD) | \
+ FW_CMD_REQUEST | FW_CMD_##rd_wr); \
+ (var).retval_len16 = htonl(FW_LEN16(var)); \
+} while (0)
+
+/**
+ * t4_mdio_rd - read a PHY register through MDIO
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @phy_addr: the PHY address
+ * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
+ * @reg: the register to read
+ * @valp: where to store the value
+ *
+ * Issues a FW command through the given mailbox to read a PHY register.
+ */
+int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
+ unsigned int mmd, unsigned int reg, u16 *valp)
+{
+ int ret;
+ struct fw_ldst_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST |
+ FW_CMD_READ | FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO));
+ c.cycles_to_len16 = htonl(FW_LEN16(c));
+ c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR(phy_addr) |
+ FW_LDST_CMD_MMD(mmd));
+ c.u.mdio.raddr = htons(reg);
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret == 0)
+ *valp = ntohs(c.u.mdio.rval);
+ return ret;
+}
+
+/**
+ * t4_mdio_wr - write a PHY register through MDIO
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @phy_addr: the PHY address
+ * @mmd: the PHY MMD to access (0 for clause 22 PHYs)
+ * @reg: the register to write
+ * @valp: value to write
+ *
+ * Issues a FW command through the given mailbox to write a PHY register.
+ */
+int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
+ unsigned int mmd, unsigned int reg, u16 val)
+{
+ struct fw_ldst_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_addrspace = htonl(FW_CMD_OP(FW_LDST_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO));
+ c.cycles_to_len16 = htonl(FW_LEN16(c));
+ c.u.mdio.paddr_mmd = htons(FW_LDST_CMD_PADDR(phy_addr) |
+ FW_LDST_CMD_MMD(mmd));
+ c.u.mdio.raddr = htons(reg);
+ c.u.mdio.rval = htons(val);
+
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_fw_hello - establish communication with FW
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @evt_mbox: mailbox to receive async FW events
+ * @master: specifies the caller's willingness to be the device master
+ * @state: returns the current device state
+ *
+ * Issues a command to establish communication with FW.
+ */
+int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
+ enum dev_master master, enum dev_state *state)
+{
+ int ret;
+ struct fw_hello_cmd c;
+
+ INIT_CMD(c, HELLO, WRITE);
+ c.err_to_mbasyncnot = htonl(
+ FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) |
+ FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) |
+ FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) |
+ FW_HELLO_CMD_MBASYNCNOT(evt_mbox));
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret == 0 && state) {
+ u32 v = ntohl(c.err_to_mbasyncnot);
+ if (v & FW_HELLO_CMD_INIT)
+ *state = DEV_STATE_INIT;
+ else if (v & FW_HELLO_CMD_ERR)
+ *state = DEV_STATE_ERR;
+ else
+ *state = DEV_STATE_UNINIT;
+ }
+ return ret;
+}
+
+/**
+ * t4_fw_bye - end communication with FW
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ *
+ * Issues a command to terminate communication with FW.
+ */
+int t4_fw_bye(struct adapter *adap, unsigned int mbox)
+{
+ struct fw_bye_cmd c;
+
+ INIT_CMD(c, BYE, WRITE);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_init_cmd - ask FW to initialize the device
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ *
+ * Issues a command to FW to partially initialize the device. This
+ * performs initialization that generally doesn't depend on user input.
+ */
+int t4_early_init(struct adapter *adap, unsigned int mbox)
+{
+ struct fw_initialize_cmd c;
+
+ INIT_CMD(c, INITIALIZE, WRITE);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_fw_reset - issue a reset to FW
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @reset: specifies the type of reset to perform
+ *
+ * Issues a reset command of the specified type to FW.
+ */
+int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
+{
+ struct fw_reset_cmd c;
+
+ INIT_CMD(c, RESET, WRITE);
+ c.val = htonl(reset);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_query_params - query FW or device parameters
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF
+ * @vf: the VF
+ * @nparams: the number of parameters
+ * @params: the parameter names
+ * @val: the parameter values
+ *
+ * Reads the value of FW or device parameters. Up to 7 parameters can be
+ * queried at once.
+ */
+int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int nparams, const u32 *params,
+ u32 *val)
+{
+ int i, ret;
+ struct fw_params_cmd c;
+ __be32 *p = &c.param[0].mnem;
+
+ if (nparams > 7)
+ return -EINVAL;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | FW_CMD_REQUEST |
+ FW_CMD_READ | FW_PARAMS_CMD_PFN(pf) |
+ FW_PARAMS_CMD_VFN(vf));
+ c.retval_len16 = htonl(FW_LEN16(c));
+ for (i = 0; i < nparams; i++, p += 2)
+ *p = htonl(*params++);
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret == 0)
+ for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
+ *val++ = ntohl(*p);
+ return ret;
+}
+
+/**
+ * t4_set_params - sets FW or device parameters
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF
+ * @vf: the VF
+ * @nparams: the number of parameters
+ * @params: the parameter names
+ * @val: the parameter values
+ *
+ * Sets the value of FW or device parameters. Up to 7 parameters can be
+ * specified at once.
+ */
+int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int nparams, const u32 *params,
+ const u32 *val)
+{
+ struct fw_params_cmd c;
+ __be32 *p = &c.param[0].mnem;
+
+ if (nparams > 7)
+ return -EINVAL;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_PARAMS_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_PARAMS_CMD_PFN(pf) |
+ FW_PARAMS_CMD_VFN(vf));
+ c.retval_len16 = htonl(FW_LEN16(c));
+ while (nparams--) {
+ *p++ = htonl(*params++);
+ *p++ = htonl(*val++);
+ }
+
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_cfg_pfvf - configure PF/VF resource limits
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF being configured
+ * @vf: the VF being configured
+ * @txq: the max number of egress queues
+ * @txq_eth_ctrl: the max number of egress Ethernet or control queues
+ * @rxqi: the max number of interrupt-capable ingress queues
+ * @rxq: the max number of interruptless ingress queues
+ * @tc: the PCI traffic class
+ * @vi: the max number of virtual interfaces
+ * @cmask: the channel access rights mask for the PF/VF
+ * @pmask: the port access rights mask for the PF/VF
+ * @nexact: the maximum number of exact MPS filters
+ * @rcaps: read capabilities
+ * @wxcaps: write/execute capabilities
+ *
+ * Configures resource limits and capabilities for a physical or virtual
+ * function.
+ */
+int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
+ unsigned int rxqi, unsigned int rxq, unsigned int tc,
+ unsigned int vi, unsigned int cmask, unsigned int pmask,
+ unsigned int nexact, unsigned int rcaps, unsigned int wxcaps)
+{
+ struct fw_pfvf_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_PFVF_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_PFVF_CMD_PFN(pf) |
+ FW_PFVF_CMD_VFN(vf));
+ c.retval_len16 = htonl(FW_LEN16(c));
+ c.niqflint_niq = htonl(FW_PFVF_CMD_NIQFLINT(rxqi) |
+ FW_PFVF_CMD_NIQ(rxq));
+ c.cmask_to_neq = htonl(FW_PFVF_CMD_CMASK(cmask) |
+ FW_PFVF_CMD_PMASK(pmask) |
+ FW_PFVF_CMD_NEQ(txq));
+ c.tc_to_nexactf = htonl(FW_PFVF_CMD_TC(tc) | FW_PFVF_CMD_NVI(vi) |
+ FW_PFVF_CMD_NEXACTF(nexact));
+ c.r_caps_to_nethctrl = htonl(FW_PFVF_CMD_R_CAPS(rcaps) |
+ FW_PFVF_CMD_WX_CAPS(wxcaps) |
+ FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_alloc_vi - allocate a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @port: physical port associated with the VI
+ * @pf: the PF owning the VI
+ * @vf: the VF owning the VI
+ * @nmac: number of MAC addresses needed (1 to 5)
+ * @mac: the MAC addresses of the VI
+ * @rss_size: size of RSS table slice associated with this VI
+ *
+ * Allocates a virtual interface for the given physical port. If @mac is
+ * not %NULL it contains the MAC addresses of the VI as assigned by FW.
+ * @mac should be large enough to hold @nmac Ethernet addresses, they are
+ * stored consecutively so the space needed is @nmac * 6 bytes.
+ * Returns a negative error number or the non-negative VI id.
+ */
+int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
+ unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
+ unsigned int *rss_size)
+{
+ int ret;
+ struct fw_vi_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_VI_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_CMD_EXEC |
+ FW_VI_CMD_PFN(pf) | FW_VI_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_VI_CMD_ALLOC | FW_LEN16(c));
+ c.portid_pkd = FW_VI_CMD_PORTID(port);
+ c.nmac = nmac - 1;
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret)
+ return ret;
+
+ if (mac) {
+ memcpy(mac, c.mac, sizeof(c.mac));
+ switch (nmac) {
+ case 5:
+ memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
+ case 4:
+ memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
+ case 3:
+ memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
+ case 2:
+ memcpy(mac + 6, c.nmac0, sizeof(c.nmac0));
+ }
+ }
+ if (rss_size)
+ *rss_size = FW_VI_CMD_RSSSIZE_GET(ntohs(c.rsssize_pkd));
+ return ntohs(c.viid_pkd);
+}
+
+/**
+ * t4_free_vi - free a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the VI
+ * @vf: the VF owning the VI
+ * @viid: virtual interface identifiler
+ *
+ * Free a previously allocated virtual interface.
+ */
+int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int viid)
+{
+ struct fw_vi_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_VI_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_VI_CMD_PFN(pf) |
+ FW_VI_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_VI_CMD_FREE | FW_LEN16(c));
+ c.viid_pkd = htons(FW_VI_CMD_VIID(viid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+}
+
+/**
+ * t4_set_rxmode - set Rx properties of a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @mtu: the new MTU or -1
+ * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
+ * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
+ * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
+ * @sleep_ok: if true we may sleep while awaiting command completion
+ *
+ * Sets Rx properties of a virtual interface.
+ */
+int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ int mtu, int promisc, int all_multi, int bcast, bool sleep_ok)
+{
+ struct fw_vi_rxmode_cmd c;
+
+ /* convert to FW values */
+ if (mtu < 0)
+ mtu = FW_RXMODE_MTU_NO_CHG;
+ if (promisc < 0)
+ promisc = FW_VI_RXMODE_CMD_PROMISCEN_MASK;
+ if (all_multi < 0)
+ all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_MASK;
+ if (bcast < 0)
+ bcast = FW_VI_RXMODE_CMD_BROADCASTEN_MASK;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = htonl(FW_CMD_OP(FW_VI_RXMODE_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_VI_RXMODE_CMD_VIID(viid));
+ c.retval_len16 = htonl(FW_LEN16(c));
+ c.mtu_to_broadcasten = htonl(FW_VI_RXMODE_CMD_MTU(mtu) |
+ FW_VI_RXMODE_CMD_PROMISCEN(promisc) |
+ FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) |
+ FW_VI_RXMODE_CMD_BROADCASTEN(bcast));
+ return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
+}
+
+/**
+ * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @free: if true any existing filters for this VI id are first removed
+ * @naddr: the number of MAC addresses to allocate filters for (up to 7)
+ * @addr: the MAC address(es)
+ * @idx: where to store the index of each allocated filter
+ * @hash: pointer to hash address filter bitmap
+ * @sleep_ok: call is allowed to sleep
+ *
+ * Allocates an exact-match filter for each of the supplied addresses and
+ * sets it to the corresponding address. If @idx is not %NULL it should
+ * have at least @naddr entries, each of which will be set to the index of
+ * the filter allocated for the corresponding MAC address. If a filter
+ * could not be allocated for an address its index is set to 0xffff.
+ * If @hash is not %NULL addresses that fail to allocate an exact filter
+ * are hashed and update the hash filter bitmap pointed at by @hash.
+ *
+ * Returns a negative error number or the number of filters allocated.
+ */
+int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
+ unsigned int viid, bool free, unsigned int naddr,
+ const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok)
+{
+ int i, ret;
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_exact *p;
+
+ if (naddr > 7)
+ return -EINVAL;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | (free ? FW_CMD_EXEC : 0) |
+ FW_VI_MAC_CMD_VIID(viid));
+ c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_FREEMACS(free) |
+ FW_CMD_LEN16((naddr + 2) / 2));
+
+ for (i = 0, p = c.u.exact; i < naddr; i++, p++) {
+ p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID |
+ FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
+ memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
+ }
+
+ ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
+ if (ret)
+ return ret;
+
+ for (i = 0, p = c.u.exact; i < naddr; i++, p++) {
+ u16 index = FW_VI_MAC_CMD_IDX_GET(ntohs(p->valid_to_idx));
+
+ if (idx)
+ idx[i] = index >= NEXACT_MAC ? 0xffff : index;
+ if (index < NEXACT_MAC)
+ ret++;
+ else if (hash)
+ *hash |= (1 << hash_mac_addr(addr[i]));
+ }
+ return ret;
+}
+
+/**
+ * t4_change_mac - modifies the exact-match filter for a MAC address
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @idx: index of existing filter for old value of MAC address, or -1
+ * @addr: the new MAC address value
+ * @persist: whether a new MAC allocation should be persistent
+ * @add_smt: if true also add the address to the HW SMT
+ *
+ * Modifies an exact-match filter and sets it to the new MAC address.
+ * Note that in general it is not possible to modify the value of a given
+ * filter so the generic way to modify an address filter is to free the one
+ * being used by the old address value and allocate a new filter for the
+ * new address value. @idx can be -1 if the address is a new addition.
+ *
+ * Returns a negative error number or the index of the filter with the new
+ * MAC value.
+ */
+int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ int idx, const u8 *addr, bool persist, bool add_smt)
+{
+ int ret, mode;
+ struct fw_vi_mac_cmd c;
+ struct fw_vi_mac_exact *p = c.u.exact;
+
+ if (idx < 0) /* new allocation */
+ idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
+ mode = add_smt ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_VI_MAC_CMD_VIID(viid));
+ c.freemacs_to_len16 = htonl(FW_CMD_LEN16(1));
+ p->valid_to_idx = htons(FW_VI_MAC_CMD_VALID |
+ FW_VI_MAC_CMD_SMAC_RESULT(mode) |
+ FW_VI_MAC_CMD_IDX(idx));
+ memcpy(p->macaddr, addr, sizeof(p->macaddr));
+
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret == 0) {
+ ret = FW_VI_MAC_CMD_IDX_GET(ntohs(p->valid_to_idx));
+ if (ret >= NEXACT_MAC)
+ ret = -ENOMEM;
+ }
+ return ret;
+}
+
+/**
+ * t4_set_addr_hash - program the MAC inexact-match hash filter
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @ucast: whether the hash filter should also match unicast addresses
+ * @vec: the value to be written to the hash filter
+ * @sleep_ok: call is allowed to sleep
+ *
+ * Sets the 64-bit inexact-match hash filter for a virtual interface.
+ */
+int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ bool ucast, u64 vec, bool sleep_ok)
+{
+ struct fw_vi_mac_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = htonl(FW_CMD_OP(FW_VI_MAC_CMD) | FW_CMD_REQUEST |
+ FW_CMD_WRITE | FW_VI_ENABLE_CMD_VIID(viid));
+ c.freemacs_to_len16 = htonl(FW_VI_MAC_CMD_HASHVECEN |
+ FW_VI_MAC_CMD_HASHUNIEN(ucast) |
+ FW_CMD_LEN16(1));
+ c.u.hash.hashvec = cpu_to_be64(vec);
+ return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
+}
+
+/**
+ * t4_enable_vi - enable/disable a virtual interface
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @rx_en: 1=enable Rx, 0=disable Rx
+ * @tx_en: 1=enable Tx, 0=disable Tx
+ *
+ * Enables/disables a virtual interface.
+ */
+int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ bool rx_en, bool tx_en)
+{
+ struct fw_vi_enable_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
+ c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_IEN(rx_en) |
+ FW_VI_ENABLE_CMD_EEN(tx_en) | FW_LEN16(c));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_identify_port - identify a VI's port by blinking its LED
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @viid: the VI id
+ * @nblinks: how many times to blink LED at 2.5 Hz
+ *
+ * Identifies a VI's port by blinking its LED.
+ */
+int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
+ unsigned int nblinks)
+{
+ struct fw_vi_enable_cmd c;
+
+ c.op_to_viid = htonl(FW_CMD_OP(FW_VI_ENABLE_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_VI_ENABLE_CMD_VIID(viid));
+ c.ien_to_len16 = htonl(FW_VI_ENABLE_CMD_LED | FW_LEN16(c));
+ c.blinkdur = htons(nblinks);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_iq_start_stop - enable/disable an ingress queue and its FLs
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @start: %true to enable the queues, %false to disable them
+ * @pf: the PF owning the queues
+ * @vf: the VF owning the queues
+ * @iqid: ingress queue id
+ * @fl0id: FL0 queue id or 0xffff if no attached FL0
+ * @fl1id: FL1 queue id or 0xffff if no attached FL1
+ *
+ * Starts or stops an ingress queue and its associated FLs, if any.
+ */
+int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start,
+ unsigned int pf, unsigned int vf, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id)
+{
+ struct fw_iq_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_IQ_CMD_PFN(pf) |
+ FW_IQ_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_IQ_CMD_IQSTART(start) |
+ FW_IQ_CMD_IQSTOP(!start) | FW_LEN16(c));
+ c.iqid = htons(iqid);
+ c.fl0id = htons(fl0id);
+ c.fl1id = htons(fl1id);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_iq_free - free an ingress queue and its FLs
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queues
+ * @vf: the VF owning the queues
+ * @iqtype: the ingress queue type
+ * @iqid: ingress queue id
+ * @fl0id: FL0 queue id or 0xffff if no attached FL0
+ * @fl1id: FL1 queue id or 0xffff if no attached FL1
+ *
+ * Frees an ingress queue and its associated FLs, if any.
+ */
+int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int iqtype, unsigned int iqid,
+ unsigned int fl0id, unsigned int fl1id)
+{
+ struct fw_iq_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_IQ_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_IQ_CMD_PFN(pf) |
+ FW_IQ_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_IQ_CMD_FREE | FW_LEN16(c));
+ c.type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE(iqtype));
+ c.iqid = htons(iqid);
+ c.fl0id = htons(fl0id);
+ c.fl1id = htons(fl1id);
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_eth_eq_free - free an Ethernet egress queue
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queue
+ * @vf: the VF owning the queue
+ * @eqid: egress queue id
+ *
+ * Frees an Ethernet egress queue.
+ */
+int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid)
+{
+ struct fw_eq_eth_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_ETH_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_EQ_ETH_CMD_PFN(pf) |
+ FW_EQ_ETH_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_FREE | FW_LEN16(c));
+ c.eqid_pkd = htonl(FW_EQ_ETH_CMD_EQID(eqid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_ctrl_eq_free - free a control egress queue
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queue
+ * @vf: the VF owning the queue
+ * @eqid: egress queue id
+ *
+ * Frees a control egress queue.
+ */
+int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid)
+{
+ struct fw_eq_ctrl_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_EQ_CTRL_CMD_PFN(pf) |
+ FW_EQ_CTRL_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_EQ_CTRL_CMD_FREE | FW_LEN16(c));
+ c.cmpliqid_eqid = htonl(FW_EQ_CTRL_CMD_EQID(eqid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_ofld_eq_free - free an offload egress queue
+ * @adap: the adapter
+ * @mbox: mailbox to use for the FW command
+ * @pf: the PF owning the queue
+ * @vf: the VF owning the queue
+ * @eqid: egress queue id
+ *
+ * Frees a control egress queue.
+ */
+int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
+ unsigned int vf, unsigned int eqid)
+{
+ struct fw_eq_ofld_cmd c;
+
+ memset(&c, 0, sizeof(c));
+ c.op_to_vfn = htonl(FW_CMD_OP(FW_EQ_OFLD_CMD) | FW_CMD_REQUEST |
+ FW_CMD_EXEC | FW_EQ_OFLD_CMD_PFN(pf) |
+ FW_EQ_OFLD_CMD_VFN(vf));
+ c.alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_FREE | FW_LEN16(c));
+ c.eqid_pkd = htonl(FW_EQ_OFLD_CMD_EQID(eqid));
+ return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
+}
+
+/**
+ * t4_handle_fw_rpl - process a FW reply message
+ * @adap: the adapter
+ * @rpl: start of the FW message
+ *
+ * Processes a FW message, such as link state change messages.
+ */
+int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
+{
+ u8 opcode = *(const u8 *)rpl;
+
+ if (opcode == FW_PORT_CMD) { /* link/module state change message */
+ int speed = 0, fc = 0;
+ const struct fw_port_cmd *p = (void *)rpl;
+ int chan = FW_PORT_CMD_PORTID_GET(ntohl(p->op_to_portid));
+ int port = adap->chan_map[chan];
+ struct port_info *pi = adap2pinfo(adap, port);
+ struct link_config *lc = &pi->link_cfg;
+ u32 stat = ntohl(p->u.info.lstatus_to_modtype);
+ int link_ok = (stat & FW_PORT_CMD_LSTATUS) != 0;
+ u32 mod = FW_PORT_CMD_MODTYPE_GET(stat);
+
+ if (stat & FW_PORT_CMD_RXPAUSE)
+ fc |= PAUSE_RX;
+ if (stat & FW_PORT_CMD_TXPAUSE)
+ fc |= PAUSE_TX;
+ if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M))
+ speed = SPEED_100;
+ else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G))
+ speed = SPEED_1000;
+ else if (stat & FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G))
+ speed = SPEED_10000;
+
+ if (link_ok != lc->link_ok || speed != lc->speed ||
+ fc != lc->fc) { /* something changed */
+ lc->link_ok = link_ok;
+ lc->speed = speed;
+ lc->fc = fc;
+ t4_os_link_changed(adap, port, link_ok);
+ }
+ if (mod != pi->mod_type) {
+ pi->mod_type = mod;
+ t4_os_portmod_changed(adap, port);
+ }
+ }
+ return 0;
+}
+
+static void __devinit get_pci_mode(struct adapter *adapter,
+ struct pci_params *p)
+{
+ u16 val;
+ u32 pcie_cap = pci_pcie_cap(adapter->pdev);
+
+ if (pcie_cap) {
+ pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA,
+ &val);
+ p->speed = val & PCI_EXP_LNKSTA_CLS;
+ p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4;
+ }
+}
+
+/**
+ * init_link_config - initialize a link's SW state
+ * @lc: structure holding the link state
+ * @caps: link capabilities
+ *
+ * Initializes the SW state maintained for each link, including the link's
+ * capabilities and default speed/flow-control/autonegotiation settings.
+ */
+static void __devinit init_link_config(struct link_config *lc,
+ unsigned int caps)
+{
+ lc->supported = caps;
+ lc->requested_speed = 0;
+ lc->speed = 0;
+ lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+ if (lc->supported & FW_PORT_CAP_ANEG) {
+ lc->advertising = lc->supported & ADVERT_MASK;
+ lc->autoneg = AUTONEG_ENABLE;
+ lc->requested_fc |= PAUSE_AUTONEG;
+ } else {
+ lc->advertising = 0;
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+}
+
+static int __devinit wait_dev_ready(struct adapter *adap)
+{
+ if (t4_read_reg(adap, PL_WHOAMI) != 0xffffffff)
+ return 0;
+ msleep(500);
+ return t4_read_reg(adap, PL_WHOAMI) != 0xffffffff ? 0 : -EIO;
+}
+
+/**
+ * t4_prep_adapter - prepare SW and HW for operation
+ * @adapter: the adapter
+ * @reset: if true perform a HW reset
+ *
+ * Initialize adapter SW state for the various HW modules, set initial
+ * values for some adapter tunables, take PHYs out of reset, and
+ * initialize the MDIO interface.
+ */
+int __devinit t4_prep_adapter(struct adapter *adapter)
+{
+ int ret;
+
+ ret = wait_dev_ready(adapter);
+ if (ret < 0)
+ return ret;
+
+ get_pci_mode(adapter, &adapter->params.pci);
+ adapter->params.rev = t4_read_reg(adapter, PL_REV);
+
+ ret = get_vpd_params(adapter, &adapter->params.vpd);
+ if (ret < 0)
+ return ret;
+
+ init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
+
+ /*
+ * Default port for debugging in case we can't reach FW.
+ */
+ adapter->params.nports = 1;
+ adapter->params.portvec = 1;
+ return 0;
+}
+
+int __devinit t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
+{
+ u8 addr[6];
+ int ret, i, j = 0;
+ struct fw_port_cmd c;
+
+ memset(&c, 0, sizeof(c));
+
+ for_each_port(adap, i) {
+ unsigned int rss_size;
+ struct port_info *p = adap2pinfo(adap, i);
+
+ while ((adap->params.portvec & (1 << j)) == 0)
+ j++;
+
+ c.op_to_portid = htonl(FW_CMD_OP(FW_PORT_CMD) |
+ FW_CMD_REQUEST | FW_CMD_READ |
+ FW_PORT_CMD_PORTID(j));
+ c.action_to_len16 = htonl(
+ FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) |
+ FW_LEN16(c));
+ ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
+ if (ret)
+ return ret;
+
+ ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size);
+ if (ret < 0)
+ return ret;
+
+ p->viid = ret;
+ p->tx_chan = j;
+ p->lport = j;
+ p->rss_size = rss_size;
+ memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN);
+ memcpy(adap->port[i]->perm_addr, addr, ETH_ALEN);
+
+ ret = ntohl(c.u.info.lstatus_to_modtype);
+ p->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP) ?
+ FW_PORT_CMD_MDIOADDR_GET(ret) : -1;
+ p->port_type = FW_PORT_CMD_PTYPE_GET(ret);
+ p->mod_type = FW_PORT_CMD_MODTYPE_GET(ret);
+
+ init_link_config(&p->link_cfg, ntohs(c.u.info.pcap));
+ j++;
+ }
+ return 0;
+}
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __T4_HW_H
+#define __T4_HW_H
+
+#include <linux/types.h>
+
+enum {
+ NCHAN = 4, /* # of HW channels */
+ MAX_MTU = 9600, /* max MAC MTU, excluding header + FCS */
+ EEPROMSIZE = 17408, /* Serial EEPROM physical size */
+ EEPROMVSIZE = 32768, /* Serial EEPROM virtual address space size */
+ RSS_NENTRIES = 2048, /* # of entries in RSS mapping table */
+ TCB_SIZE = 128, /* TCB size */
+ NMTUS = 16, /* size of MTU table */
+ NCCTRL_WIN = 32, /* # of congestion control windows */
+ NEXACT_MAC = 336, /* # of exact MAC address filters */
+ L2T_SIZE = 4096, /* # of L2T entries */
+ MBOX_LEN = 64, /* mailbox size in bytes */
+ TRACE_LEN = 112, /* length of trace data and mask */
+ FILTER_OPT_LEN = 36, /* filter tuple width for optional components */
+ NWOL_PAT = 8, /* # of WoL patterns */
+ WOL_PAT_LEN = 128, /* length of WoL patterns */
+};
+
+enum {
+ SF_PAGE_SIZE = 256, /* serial flash page size */
+ SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */
+ SF_SIZE = SF_SEC_SIZE * 16, /* serial flash size */
+};
+
+enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */
+
+enum { MBOX_OWNER_NONE, MBOX_OWNER_FW, MBOX_OWNER_DRV }; /* mailbox owners */
+
+enum {
+ SGE_MAX_WR_LEN = 512, /* max WR size in bytes */
+ SGE_NTIMERS = 6, /* # of interrupt holdoff timer values */
+ SGE_NCOUNTERS = 4, /* # of interrupt packet counter values */
+};
+
+struct sge_qstat { /* data written to SGE queue status entries */
+ __be32 qid;
+ __be16 cidx;
+ __be16 pidx;
+};
+
+/*
+ * Structure for last 128 bits of response descriptors
+ */
+struct rsp_ctrl {
+ __be32 hdrbuflen_pidx;
+ __be32 pldbuflen_qid;
+ union {
+ u8 type_gen;
+ __be64 last_flit;
+ };
+};
+
+#define RSPD_NEWBUF 0x80000000U
+#define RSPD_LEN 0x7fffffffU
+
+#define RSPD_GEN(x) ((x) >> 7)
+#define RSPD_TYPE(x) (((x) >> 4) & 3)
+
+#define QINTR_CNT_EN 0x1
+#define QINTR_TIMER_IDX(x) ((x) << 1)
+#endif /* __T4_HW_H */
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __T4_MSG_H
+#define __T4_MSG_H
+
+#include <linux/types.h>
+
+enum {
+ CPL_PASS_OPEN_REQ = 0x1,
+ CPL_PASS_ACCEPT_RPL = 0x2,
+ CPL_ACT_OPEN_REQ = 0x3,
+ CPL_SET_TCB_FIELD = 0x5,
+ CPL_GET_TCB = 0x6,
+ CPL_CLOSE_CON_REQ = 0x8,
+ CPL_CLOSE_LISTSRV_REQ = 0x9,
+ CPL_ABORT_REQ = 0xA,
+ CPL_ABORT_RPL = 0xB,
+ CPL_RX_DATA_ACK = 0xD,
+ CPL_TX_PKT = 0xE,
+ CPL_L2T_WRITE_REQ = 0x12,
+ CPL_TID_RELEASE = 0x1A,
+
+ CPL_CLOSE_LISTSRV_RPL = 0x20,
+ CPL_L2T_WRITE_RPL = 0x23,
+ CPL_PASS_OPEN_RPL = 0x24,
+ CPL_ACT_OPEN_RPL = 0x25,
+ CPL_PEER_CLOSE = 0x26,
+ CPL_ABORT_REQ_RSS = 0x2B,
+ CPL_ABORT_RPL_RSS = 0x2D,
+
+ CPL_CLOSE_CON_RPL = 0x32,
+ CPL_ISCSI_HDR = 0x33,
+ CPL_RDMA_CQE = 0x35,
+ CPL_RDMA_CQE_READ_RSP = 0x36,
+ CPL_RDMA_CQE_ERR = 0x37,
+ CPL_RX_DATA = 0x39,
+ CPL_SET_TCB_RPL = 0x3A,
+ CPL_RX_PKT = 0x3B,
+ CPL_RX_DDP_COMPLETE = 0x3F,
+
+ CPL_ACT_ESTABLISH = 0x40,
+ CPL_PASS_ESTABLISH = 0x41,
+ CPL_RX_DATA_DDP = 0x42,
+ CPL_PASS_ACCEPT_REQ = 0x44,
+
+ CPL_RDMA_READ_REQ = 0x60,
+
+ CPL_PASS_OPEN_REQ6 = 0x81,
+ CPL_ACT_OPEN_REQ6 = 0x83,
+
+ CPL_RDMA_TERMINATE = 0xA2,
+ CPL_RDMA_WRITE = 0xA4,
+ CPL_SGE_EGR_UPDATE = 0xA5,
+
+ CPL_TRACE_PKT = 0xB0,
+
+ CPL_FW4_MSG = 0xC0,
+ CPL_FW4_PLD = 0xC1,
+ CPL_FW4_ACK = 0xC3,
+
+ CPL_FW6_MSG = 0xE0,
+ CPL_FW6_PLD = 0xE1,
+ CPL_TX_PKT_LSO = 0xED,
+ CPL_TX_PKT_XT = 0xEE,
+
+ NUM_CPL_CMDS
+};
+
+enum CPL_error {
+ CPL_ERR_NONE = 0,
+ CPL_ERR_TCAM_FULL = 3,
+ CPL_ERR_BAD_LENGTH = 15,
+ CPL_ERR_BAD_ROUTE = 18,
+ CPL_ERR_CONN_RESET = 20,
+ CPL_ERR_CONN_EXIST_SYNRECV = 21,
+ CPL_ERR_CONN_EXIST = 22,
+ CPL_ERR_ARP_MISS = 23,
+ CPL_ERR_BAD_SYN = 24,
+ CPL_ERR_CONN_TIMEDOUT = 30,
+ CPL_ERR_XMIT_TIMEDOUT = 31,
+ CPL_ERR_PERSIST_TIMEDOUT = 32,
+ CPL_ERR_FINWAIT2_TIMEDOUT = 33,
+ CPL_ERR_KEEPALIVE_TIMEDOUT = 34,
+ CPL_ERR_RTX_NEG_ADVICE = 35,
+ CPL_ERR_PERSIST_NEG_ADVICE = 36,
+ CPL_ERR_ABORT_FAILED = 42,
+ CPL_ERR_IWARP_FLM = 50,
+};
+
+enum {
+ ULP_MODE_NONE = 0,
+ ULP_MODE_ISCSI = 2,
+ ULP_MODE_RDMA = 4,
+ ULP_MODE_FCOE = 6,
+};
+
+enum {
+ ULP_CRC_HEADER = 1 << 0,
+ ULP_CRC_DATA = 1 << 1
+};
+
+enum {
+ CPL_ABORT_SEND_RST = 0,
+ CPL_ABORT_NO_RST,
+};
+
+enum { /* TX_PKT_XT checksum types */
+ TX_CSUM_TCP = 0,
+ TX_CSUM_UDP = 1,
+ TX_CSUM_CRC16 = 4,
+ TX_CSUM_CRC32 = 5,
+ TX_CSUM_CRC32C = 6,
+ TX_CSUM_FCOE = 7,
+ TX_CSUM_TCPIP = 8,
+ TX_CSUM_UDPIP = 9,
+ TX_CSUM_TCPIP6 = 10,
+ TX_CSUM_UDPIP6 = 11,
+ TX_CSUM_IP = 12,
+};
+
+union opcode_tid {
+ __be32 opcode_tid;
+ u8 opcode;
+};
+
+#define CPL_OPCODE(x) ((x) << 24)
+#define MK_OPCODE_TID(opcode, tid) (CPL_OPCODE(opcode) | (tid))
+#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid)
+#define GET_TID(cmd) (ntohl(OPCODE_TID(cmd)) & 0xFFFFFF)
+
+/* partitioning of TID fields that also carry a queue id */
+#define GET_TID_TID(x) ((x) & 0x3fff)
+#define GET_TID_QID(x) (((x) >> 14) & 0x3ff)
+#define TID_QID(x) ((x) << 14)
+
+struct rss_header {
+ u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 channel:2;
+ u8 filter_hit:1;
+ u8 filter_tid:1;
+ u8 hash_type:2;
+ u8 ipv6:1;
+ u8 send2fw:1;
+#else
+ u8 send2fw:1;
+ u8 ipv6:1;
+ u8 hash_type:2;
+ u8 filter_tid:1;
+ u8 filter_hit:1;
+ u8 channel:2;
+#endif
+ __be16 qid;
+ __be32 hash_val;
+};
+
+struct work_request_hdr {
+ __be32 wr_hi;
+ __be32 wr_mid;
+ __be64 wr_lo;
+};
+
+#define WR_HDR struct work_request_hdr wr
+
+struct cpl_pass_open_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be64 opt0;
+#define TX_CHAN(x) ((x) << 2)
+#define DELACK(x) ((x) << 5)
+#define ULP_MODE(x) ((x) << 8)
+#define RCV_BUFSIZ(x) ((x) << 12)
+#define DSCP(x) ((x) << 22)
+#define SMAC_SEL(x) ((u64)(x) << 28)
+#define L2T_IDX(x) ((u64)(x) << 36)
+#define NAGLE(x) ((u64)(x) << 49)
+#define WND_SCALE(x) ((u64)(x) << 50)
+#define KEEP_ALIVE(x) ((u64)(x) << 54)
+#define MSS_IDX(x) ((u64)(x) << 60)
+ __be64 opt1;
+#define SYN_RSS_ENABLE (1 << 0)
+#define SYN_RSS_QUEUE(x) ((x) << 2)
+#define CONN_POLICY_ASK (1 << 22)
+};
+
+struct cpl_pass_open_req6 {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be64 local_ip_hi;
+ __be64 local_ip_lo;
+ __be64 peer_ip_hi;
+ __be64 peer_ip_lo;
+ __be64 opt0;
+ __be64 opt1;
+};
+
+struct cpl_pass_open_rpl {
+ union opcode_tid ot;
+ u8 rsvd[3];
+ u8 status;
+};
+
+struct cpl_pass_accept_rpl {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 opt2;
+#define RSS_QUEUE(x) ((x) << 0)
+#define RSS_QUEUE_VALID (1 << 10)
+#define RX_COALESCE_VALID(x) ((x) << 11)
+#define RX_COALESCE(x) ((x) << 12)
+#define TX_QUEUE(x) ((x) << 23)
+#define RX_CHANNEL(x) ((x) << 26)
+#define WND_SCALE_EN(x) ((x) << 28)
+#define TSTAMPS_EN(x) ((x) << 29)
+#define SACK_EN(x) ((x) << 30)
+ __be64 opt0;
+};
+
+struct cpl_act_open_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be64 opt0;
+ __be32 params;
+ __be32 opt2;
+};
+
+struct cpl_act_open_req6 {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be64 local_ip_hi;
+ __be64 local_ip_lo;
+ __be64 peer_ip_hi;
+ __be64 peer_ip_lo;
+ __be64 opt0;
+ __be32 params;
+ __be32 opt2;
+};
+
+struct cpl_act_open_rpl {
+ union opcode_tid ot;
+ __be32 atid_status;
+#define GET_AOPEN_STATUS(x) ((x) & 0xff)
+#define GET_AOPEN_ATID(x) (((x) >> 8) & 0xffffff)
+};
+
+struct cpl_pass_establish {
+ union opcode_tid ot;
+ __be32 rsvd;
+ __be32 tos_stid;
+#define GET_POPEN_TID(x) ((x) & 0xffffff)
+#define GET_POPEN_TOS(x) (((x) >> 24) & 0xff)
+ __be16 mac_idx;
+ __be16 tcp_opt;
+#define GET_TCPOPT_WSCALE_OK(x) (((x) >> 5) & 1)
+#define GET_TCPOPT_SACK(x) (((x) >> 6) & 1)
+#define GET_TCPOPT_TSTAMP(x) (((x) >> 7) & 1)
+#define GET_TCPOPT_SND_WSCALE(x) (((x) >> 8) & 0xf)
+#define GET_TCPOPT_MSS(x) (((x) >> 12) & 0xf)
+ __be32 snd_isn;
+ __be32 rcv_isn;
+};
+
+struct cpl_act_establish {
+ union opcode_tid ot;
+ __be32 rsvd;
+ __be32 tos_atid;
+ __be16 mac_idx;
+ __be16 tcp_opt;
+ __be32 snd_isn;
+ __be32 rcv_isn;
+};
+
+struct cpl_get_tcb {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 reply_ctrl;
+#define QUEUENO(x) ((x) << 0)
+#define REPLY_CHAN(x) ((x) << 14)
+#define NO_REPLY(x) ((x) << 15)
+ __be16 cookie;
+};
+
+struct cpl_set_tcb_field {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 reply_ctrl;
+ __be16 word_cookie;
+#define TCB_WORD(x) ((x) << 0)
+#define TCB_COOKIE(x) ((x) << 5)
+ __be64 mask;
+ __be64 val;
+};
+
+struct cpl_set_tcb_rpl {
+ union opcode_tid ot;
+ __be16 rsvd;
+ u8 cookie;
+ u8 status;
+ __be64 oldval;
+};
+
+struct cpl_close_con_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd;
+};
+
+struct cpl_close_con_rpl {
+ union opcode_tid ot;
+ u8 rsvd[3];
+ u8 status;
+ __be32 snd_nxt;
+ __be32 rcv_nxt;
+};
+
+struct cpl_close_listsvr_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 reply_ctrl;
+#define LISTSVR_IPV6 (1 << 14)
+ __be16 rsvd;
+};
+
+struct cpl_close_listsvr_rpl {
+ union opcode_tid ot;
+ u8 rsvd[3];
+ u8 status;
+};
+
+struct cpl_abort_req_rss {
+ union opcode_tid ot;
+ u8 rsvd[3];
+ u8 status;
+};
+
+struct cpl_abort_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd0;
+ u8 rsvd1;
+ u8 cmd;
+ u8 rsvd2[6];
+};
+
+struct cpl_abort_rpl_rss {
+ union opcode_tid ot;
+ u8 rsvd[3];
+ u8 status;
+};
+
+struct cpl_abort_rpl {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd0;
+ u8 rsvd1;
+ u8 cmd;
+ u8 rsvd2[6];
+};
+
+struct cpl_peer_close {
+ union opcode_tid ot;
+ __be32 rcv_nxt;
+};
+
+struct cpl_tid_release {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd;
+};
+
+struct cpl_tx_pkt_core {
+ __be32 ctrl0;
+#define TXPKT_VF(x) ((x) << 0)
+#define TXPKT_PF(x) ((x) << 8)
+#define TXPKT_VF_VLD (1 << 11)
+#define TXPKT_OVLAN_IDX(x) ((x) << 12)
+#define TXPKT_INTF(x) ((x) << 16)
+#define TXPKT_INS_OVLAN (1 << 21)
+#define TXPKT_OPCODE(x) ((x) << 24)
+ __be16 pack;
+ __be16 len;
+ __be64 ctrl1;
+#define TXPKT_CSUM_END(x) ((x) << 12)
+#define TXPKT_CSUM_START(x) ((x) << 20)
+#define TXPKT_IPHDR_LEN(x) ((u64)(x) << 20)
+#define TXPKT_CSUM_LOC(x) ((u64)(x) << 30)
+#define TXPKT_ETHHDR_LEN(x) ((u64)(x) << 34)
+#define TXPKT_CSUM_TYPE(x) ((u64)(x) << 40)
+#define TXPKT_VLAN(x) ((u64)(x) << 44)
+#define TXPKT_VLAN_VLD (1ULL << 60)
+#define TXPKT_IPCSUM_DIS (1ULL << 62)
+#define TXPKT_L4CSUM_DIS (1ULL << 63)
+};
+
+struct cpl_tx_pkt {
+ WR_HDR;
+ struct cpl_tx_pkt_core c;
+};
+
+#define cpl_tx_pkt_xt cpl_tx_pkt
+
+struct cpl_tx_pkt_lso {
+ WR_HDR;
+ __be32 lso_ctrl;
+#define LSO_TCPHDR_LEN(x) ((x) << 0)
+#define LSO_IPHDR_LEN(x) ((x) << 4)
+#define LSO_ETHHDR_LEN(x) ((x) << 16)
+#define LSO_IPV6(x) ((x) << 20)
+#define LSO_LAST_SLICE (1 << 22)
+#define LSO_FIRST_SLICE (1 << 23)
+#define LSO_OPCODE(x) ((x) << 24)
+ __be16 ipid_ofst;
+ __be16 mss;
+ __be32 seqno_offset;
+ __be32 len;
+ /* encapsulated CPL (TX_PKT, TX_PKT_XT or TX_DATA) follows here */
+};
+
+struct cpl_iscsi_hdr {
+ union opcode_tid ot;
+ __be16 pdu_len_ddp;
+#define ISCSI_PDU_LEN(x) ((x) & 0x7FFF)
+#define ISCSI_DDP (1 << 15)
+ __be16 len;
+ __be32 seq;
+ __be16 urg;
+ u8 rsvd;
+ u8 status;
+};
+
+struct cpl_rx_data {
+ union opcode_tid ot;
+ __be16 rsvd;
+ __be16 len;
+ __be32 seq;
+ __be16 urg;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 dack_mode:2;
+ u8 psh:1;
+ u8 heartbeat:1;
+ u8 ddp_off:1;
+ u8 :3;
+#else
+ u8 :3;
+ u8 ddp_off:1;
+ u8 heartbeat:1;
+ u8 psh:1;
+ u8 dack_mode:2;
+#endif
+ u8 status;
+};
+
+struct cpl_rx_data_ack {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 credit_dack;
+#define RX_CREDITS(x) ((x) << 0)
+#define RX_FORCE_ACK(x) ((x) << 28)
+};
+
+struct cpl_rx_pkt {
+ u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 iff:4;
+ u8 csum_calc:1;
+ u8 ipmi_pkt:1;
+ u8 vlan_ex:1;
+ u8 ip_frag:1;
+#else
+ u8 ip_frag:1;
+ u8 vlan_ex:1;
+ u8 ipmi_pkt:1;
+ u8 csum_calc:1;
+ u8 iff:4;
+#endif
+ __be16 csum;
+ __be16 vlan;
+ __be16 len;
+ __be32 l2info;
+#define RXF_UDP (1 << 22)
+#define RXF_TCP (1 << 23)
+ __be16 hdr_len;
+ __be16 err_vec;
+};
+
+struct cpl_trace_pkt {
+ u8 opcode;
+ u8 intf;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ u8 runt:4;
+ u8 filter_hit:4;
+ u8 :6;
+ u8 err:1;
+ u8 trunc:1;
+#else
+ u8 filter_hit:4;
+ u8 runt:4;
+ u8 trunc:1;
+ u8 err:1;
+ u8 :6;
+#endif
+ __be16 rsvd;
+ __be16 len;
+ __be64 tstamp;
+};
+
+struct cpl_l2t_write_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 params;
+#define L2T_W_INFO(x) ((x) << 2)
+#define L2T_W_PORT(x) ((x) << 8)
+#define L2T_W_NOREPLY(x) ((x) << 15)
+ __be16 l2t_idx;
+ __be16 vlan;
+ u8 dst_mac[6];
+};
+
+struct cpl_l2t_write_rpl {
+ union opcode_tid ot;
+ u8 status;
+ u8 rsvd[3];
+};
+
+struct cpl_rdma_terminate {
+ union opcode_tid ot;
+ __be16 rsvd;
+ __be16 len;
+};
+
+struct cpl_sge_egr_update {
+ __be32 opcode_qid;
+#define EGR_QID(x) ((x) & 0x1FFFF)
+ __be16 cidx;
+ __be16 pidx;
+};
+
+struct cpl_fw4_pld {
+ u8 opcode;
+ u8 rsvd0[3];
+ u8 type;
+ u8 rsvd1;
+ __be16 len;
+ __be64 data;
+ __be64 rsvd2;
+};
+
+struct cpl_fw6_pld {
+ u8 opcode;
+ u8 rsvd[5];
+ __be16 len;
+ __be64 data[4];
+};
+
+struct cpl_fw4_msg {
+ u8 opcode;
+ u8 type;
+ __be16 rsvd0;
+ __be32 rsvd1;
+ __be64 data[2];
+};
+
+struct cpl_fw4_ack {
+ union opcode_tid ot;
+ u8 credits;
+ u8 rsvd0[2];
+ u8 seq_vld;
+ __be32 snd_nxt;
+ __be32 snd_una;
+ __be64 rsvd1;
+};
+
+struct cpl_fw6_msg {
+ u8 opcode;
+ u8 type;
+ __be16 rsvd0;
+ __be32 rsvd1;
+ __be64 data[4];
+};
+
+enum {
+ ULP_TX_MEM_READ = 2,
+ ULP_TX_MEM_WRITE = 3,
+ ULP_TX_PKT = 4
+};
+
+enum {
+ ULP_TX_SC_NOOP = 0x80,
+ ULP_TX_SC_IMM = 0x81,
+ ULP_TX_SC_DSGL = 0x82,
+ ULP_TX_SC_ISGL = 0x83
+};
+
+struct ulptx_sge_pair {
+ __be32 len[2];
+ __be64 addr[2];
+};
+
+struct ulptx_sgl {
+ __be32 cmd_nsge;
+#define ULPTX_CMD(x) ((x) << 24)
+#define ULPTX_NSGE(x) ((x) << 0)
+ __be32 len0;
+ __be64 addr0;
+ struct ulptx_sge_pair sge[0];
+};
+
+struct ulp_mem_io {
+ WR_HDR;
+ __be32 cmd;
+#define ULP_MEMIO_ORDER(x) ((x) << 23)
+ __be32 len16; /* command length */
+ __be32 dlen; /* data length in 32-byte units */
+#define ULP_MEMIO_DATA_LEN(x) ((x) << 0)
+ __be32 lock_addr;
+#define ULP_MEMIO_ADDR(x) ((x) << 0)
+#define ULP_MEMIO_LOCK(x) ((x) << 31)
+};
+
+#endif /* __T4_MSG_H */
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __T4_REGS_H
+#define __T4_REGS_H
+
+#define MYPF_BASE 0x1b000
+#define MYPF_REG(reg_addr) (MYPF_BASE + (reg_addr))
+
+#define PF0_BASE 0x1e000
+#define PF0_REG(reg_addr) (PF0_BASE + (reg_addr))
+
+#define PF_STRIDE 0x400
+#define PF_BASE(idx) (PF0_BASE + (idx) * PF_STRIDE)
+#define PF_REG(idx, reg) (PF_BASE(idx) + (reg))
+
+#define MYPORT_BASE 0x1c000
+#define MYPORT_REG(reg_addr) (MYPORT_BASE + (reg_addr))
+
+#define PORT0_BASE 0x20000
+#define PORT0_REG(reg_addr) (PORT0_BASE + (reg_addr))
+
+#define PORT_STRIDE 0x2000
+#define PORT_BASE(idx) (PORT0_BASE + (idx) * PORT_STRIDE)
+#define PORT_REG(idx, reg) (PORT_BASE(idx) + (reg))
+
+#define EDC_STRIDE (EDC_1_BASE_ADDR - EDC_0_BASE_ADDR)
+#define EDC_REG(reg, idx) (reg + EDC_STRIDE * idx)
+
+#define PCIE_MEM_ACCESS_REG(reg_addr, idx) ((reg_addr) + (idx) * 8)
+#define PCIE_MAILBOX_REG(reg_addr, idx) ((reg_addr) + (idx) * 8)
+#define MC_BIST_STATUS_REG(reg_addr, idx) ((reg_addr) + (idx) * 4)
+#define EDC_BIST_STATUS_REG(reg_addr, idx) ((reg_addr) + (idx) * 4)
+
+#define SGE_PF_KDOORBELL 0x0
+#define QID_MASK 0xffff8000U
+#define QID_SHIFT 15
+#define QID(x) ((x) << QID_SHIFT)
+#define DBPRIO 0x00004000U
+#define PIDX_MASK 0x00003fffU
+#define PIDX_SHIFT 0
+#define PIDX(x) ((x) << PIDX_SHIFT)
+
+#define SGE_PF_GTS 0x4
+#define INGRESSQID_MASK 0xffff0000U
+#define INGRESSQID_SHIFT 16
+#define INGRESSQID(x) ((x) << INGRESSQID_SHIFT)
+#define TIMERREG_MASK 0x0000e000U
+#define TIMERREG_SHIFT 13
+#define TIMERREG(x) ((x) << TIMERREG_SHIFT)
+#define SEINTARM_MASK 0x00001000U
+#define SEINTARM_SHIFT 12
+#define SEINTARM(x) ((x) << SEINTARM_SHIFT)
+#define CIDXINC_MASK 0x00000fffU
+#define CIDXINC_SHIFT 0
+#define CIDXINC(x) ((x) << CIDXINC_SHIFT)
+
+#define SGE_CONTROL 0x1008
+#define DCASYSTYPE 0x00080000U
+#define RXPKTCPLMODE 0x00040000U
+#define EGRSTATUSPAGESIZE 0x00020000U
+#define PKTSHIFT_MASK 0x00001c00U
+#define PKTSHIFT_SHIFT 10
+#define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT)
+#define INGPCIEBOUNDARY_MASK 0x00000380U
+#define INGPCIEBOUNDARY_SHIFT 7
+#define INGPCIEBOUNDARY(x) ((x) << INGPCIEBOUNDARY_SHIFT)
+#define INGPADBOUNDARY_MASK 0x00000070U
+#define INGPADBOUNDARY_SHIFT 4
+#define INGPADBOUNDARY(x) ((x) << INGPADBOUNDARY_SHIFT)
+#define EGRPCIEBOUNDARY_MASK 0x0000000eU
+#define EGRPCIEBOUNDARY_SHIFT 1
+#define EGRPCIEBOUNDARY(x) ((x) << EGRPCIEBOUNDARY_SHIFT)
+#define GLOBALENABLE 0x00000001U
+
+#define SGE_HOST_PAGE_SIZE 0x100c
+#define HOSTPAGESIZEPF0_MASK 0x0000000fU
+#define HOSTPAGESIZEPF0_SHIFT 0
+#define HOSTPAGESIZEPF0(x) ((x) << HOSTPAGESIZEPF0_SHIFT)
+
+#define SGE_EGRESS_QUEUES_PER_PAGE_PF 0x1010
+#define QUEUESPERPAGEPF0_MASK 0x0000000fU
+#define QUEUESPERPAGEPF0_GET(x) ((x) & QUEUESPERPAGEPF0_MASK)
+
+#define SGE_INT_CAUSE1 0x1024
+#define SGE_INT_CAUSE2 0x1030
+#define SGE_INT_CAUSE3 0x103c
+#define ERR_FLM_DBP 0x80000000U
+#define ERR_FLM_IDMA1 0x40000000U
+#define ERR_FLM_IDMA0 0x20000000U
+#define ERR_FLM_HINT 0x10000000U
+#define ERR_PCIE_ERROR3 0x08000000U
+#define ERR_PCIE_ERROR2 0x04000000U
+#define ERR_PCIE_ERROR1 0x02000000U
+#define ERR_PCIE_ERROR0 0x01000000U
+#define ERR_TIMER_ABOVE_MAX_QID 0x00800000U
+#define ERR_CPL_EXCEED_IQE_SIZE 0x00400000U
+#define ERR_INVALID_CIDX_INC 0x00200000U
+#define ERR_ITP_TIME_PAUSED 0x00100000U
+#define ERR_CPL_OPCODE_0 0x00080000U
+#define ERR_DROPPED_DB 0x00040000U
+#define ERR_DATA_CPL_ON_HIGH_QID1 0x00020000U
+#define ERR_DATA_CPL_ON_HIGH_QID0 0x00010000U
+#define ERR_BAD_DB_PIDX3 0x00008000U
+#define ERR_BAD_DB_PIDX2 0x00004000U
+#define ERR_BAD_DB_PIDX1 0x00002000U
+#define ERR_BAD_DB_PIDX0 0x00001000U
+#define ERR_ING_PCIE_CHAN 0x00000800U
+#define ERR_ING_CTXT_PRIO 0x00000400U
+#define ERR_EGR_CTXT_PRIO 0x00000200U
+#define DBFIFO_HP_INT 0x00000100U
+#define DBFIFO_LP_INT 0x00000080U
+#define REG_ADDRESS_ERR 0x00000040U
+#define INGRESS_SIZE_ERR 0x00000020U
+#define EGRESS_SIZE_ERR 0x00000010U
+#define ERR_INV_CTXT3 0x00000008U
+#define ERR_INV_CTXT2 0x00000004U
+#define ERR_INV_CTXT1 0x00000002U
+#define ERR_INV_CTXT0 0x00000001U
+
+#define SGE_INT_ENABLE3 0x1040
+#define SGE_FL_BUFFER_SIZE0 0x1044
+#define SGE_FL_BUFFER_SIZE1 0x1048
+#define SGE_INGRESS_RX_THRESHOLD 0x10a0
+#define THRESHOLD_0_MASK 0x3f000000U
+#define THRESHOLD_0_SHIFT 24
+#define THRESHOLD_0(x) ((x) << THRESHOLD_0_SHIFT)
+#define THRESHOLD_0_GET(x) (((x) & THRESHOLD_0_MASK) >> THRESHOLD_0_SHIFT)
+#define THRESHOLD_1_MASK 0x003f0000U
+#define THRESHOLD_1_SHIFT 16
+#define THRESHOLD_1(x) ((x) << THRESHOLD_1_SHIFT)
+#define THRESHOLD_1_GET(x) (((x) & THRESHOLD_1_MASK) >> THRESHOLD_1_SHIFT)
+#define THRESHOLD_2_MASK 0x00003f00U
+#define THRESHOLD_2_SHIFT 8
+#define THRESHOLD_2(x) ((x) << THRESHOLD_2_SHIFT)
+#define THRESHOLD_2_GET(x) (((x) & THRESHOLD_2_MASK) >> THRESHOLD_2_SHIFT)
+#define THRESHOLD_3_MASK 0x0000003fU
+#define THRESHOLD_3_SHIFT 0
+#define THRESHOLD_3(x) ((x) << THRESHOLD_3_SHIFT)
+#define THRESHOLD_3_GET(x) (((x) & THRESHOLD_3_MASK) >> THRESHOLD_3_SHIFT)
+
+#define SGE_TIMER_VALUE_0_AND_1 0x10b8
+#define TIMERVALUE0_MASK 0xffff0000U
+#define TIMERVALUE0_SHIFT 16
+#define TIMERVALUE0(x) ((x) << TIMERVALUE0_SHIFT)
+#define TIMERVALUE0_GET(x) (((x) & TIMERVALUE0_MASK) >> TIMERVALUE0_SHIFT)
+#define TIMERVALUE1_MASK 0x0000ffffU
+#define TIMERVALUE1_SHIFT 0
+#define TIMERVALUE1(x) ((x) << TIMERVALUE1_SHIFT)
+#define TIMERVALUE1_GET(x) (((x) & TIMERVALUE1_MASK) >> TIMERVALUE1_SHIFT)
+
+#define SGE_TIMER_VALUE_2_AND_3 0x10bc
+#define SGE_TIMER_VALUE_4_AND_5 0x10c0
+#define SGE_DEBUG_INDEX 0x10cc
+#define SGE_DEBUG_DATA_HIGH 0x10d0
+#define SGE_DEBUG_DATA_LOW 0x10d4
+#define SGE_INGRESS_QUEUES_PER_PAGE_PF 0x10f4
+
+#define PCIE_PF_CLI 0x44
+#define PCIE_INT_CAUSE 0x3004
+#define UNXSPLCPLERR 0x20000000U
+#define PCIEPINT 0x10000000U
+#define PCIESINT 0x08000000U
+#define RPLPERR 0x04000000U
+#define RXWRPERR 0x02000000U
+#define RXCPLPERR 0x01000000U
+#define PIOTAGPERR 0x00800000U
+#define MATAGPERR 0x00400000U
+#define INTXCLRPERR 0x00200000U
+#define FIDPERR 0x00100000U
+#define CFGSNPPERR 0x00080000U
+#define HRSPPERR 0x00040000U
+#define HREQPERR 0x00020000U
+#define HCNTPERR 0x00010000U
+#define DRSPPERR 0x00008000U
+#define DREQPERR 0x00004000U
+#define DCNTPERR 0x00002000U
+#define CRSPPERR 0x00001000U
+#define CREQPERR 0x00000800U
+#define CCNTPERR 0x00000400U
+#define TARTAGPERR 0x00000200U
+#define PIOREQPERR 0x00000100U
+#define PIOCPLPERR 0x00000080U
+#define MSIXDIPERR 0x00000040U
+#define MSIXDATAPERR 0x00000020U
+#define MSIXADDRHPERR 0x00000010U
+#define MSIXADDRLPERR 0x00000008U
+#define MSIDATAPERR 0x00000004U
+#define MSIADDRHPERR 0x00000002U
+#define MSIADDRLPERR 0x00000001U
+
+#define PCIE_NONFAT_ERR 0x3010
+#define PCIE_MEM_ACCESS_BASE_WIN 0x3068
+#define PCIEOFST_MASK 0xfffffc00U
+#define BIR_MASK 0x00000300U
+#define BIR_SHIFT 8
+#define BIR(x) ((x) << BIR_SHIFT)
+#define WINDOW_MASK 0x000000ffU
+#define WINDOW_SHIFT 0
+#define WINDOW(x) ((x) << WINDOW_SHIFT)
+
+#define PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS 0x5908
+#define RNPP 0x80000000U
+#define RPCP 0x20000000U
+#define RCIP 0x08000000U
+#define RCCP 0x04000000U
+#define RFTP 0x00800000U
+#define PTRP 0x00100000U
+
+#define PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS 0x59a4
+#define TPCP 0x40000000U
+#define TNPP 0x20000000U
+#define TFTP 0x10000000U
+#define TCAP 0x08000000U
+#define TCIP 0x04000000U
+#define RCAP 0x02000000U
+#define PLUP 0x00800000U
+#define PLDN 0x00400000U
+#define OTDD 0x00200000U
+#define GTRP 0x00100000U
+#define RDPE 0x00040000U
+#define TDCE 0x00020000U
+#define TDUE 0x00010000U
+
+#define MC_INT_CAUSE 0x7518
+#define ECC_UE_INT_CAUSE 0x00000004U
+#define ECC_CE_INT_CAUSE 0x00000002U
+#define PERR_INT_CAUSE 0x00000001U
+
+#define MC_ECC_STATUS 0x751c
+#define ECC_CECNT_MASK 0xffff0000U
+#define ECC_CECNT_SHIFT 16
+#define ECC_CECNT(x) ((x) << ECC_CECNT_SHIFT)
+#define ECC_CECNT_GET(x) (((x) & ECC_CECNT_MASK) >> ECC_CECNT_SHIFT)
+#define ECC_UECNT_MASK 0x0000ffffU
+#define ECC_UECNT_SHIFT 0
+#define ECC_UECNT(x) ((x) << ECC_UECNT_SHIFT)
+#define ECC_UECNT_GET(x) (((x) & ECC_UECNT_MASK) >> ECC_UECNT_SHIFT)
+
+#define MC_BIST_CMD 0x7600
+#define START_BIST 0x80000000U
+#define BIST_CMD_GAP_MASK 0x0000ff00U
+#define BIST_CMD_GAP_SHIFT 8
+#define BIST_CMD_GAP(x) ((x) << BIST_CMD_GAP_SHIFT)
+#define BIST_OPCODE_MASK 0x00000003U
+#define BIST_OPCODE_SHIFT 0
+#define BIST_OPCODE(x) ((x) << BIST_OPCODE_SHIFT)
+
+#define MC_BIST_CMD_ADDR 0x7604
+#define MC_BIST_CMD_LEN 0x7608
+#define MC_BIST_DATA_PATTERN 0x760c
+#define BIST_DATA_TYPE_MASK 0x0000000fU
+#define BIST_DATA_TYPE_SHIFT 0
+#define BIST_DATA_TYPE(x) ((x) << BIST_DATA_TYPE_SHIFT)
+
+#define MC_BIST_STATUS_RDATA 0x7688
+
+#define MA_EXT_MEMORY_BAR 0x77c8
+#define EXT_MEM_SIZE_MASK 0x00000fffU
+#define EXT_MEM_SIZE_SHIFT 0
+#define EXT_MEM_SIZE_GET(x) (((x) & EXT_MEM_SIZE_MASK) >> EXT_MEM_SIZE_SHIFT)
+
+#define MA_TARGET_MEM_ENABLE 0x77d8
+#define EXT_MEM_ENABLE 0x00000004U
+#define EDRAM1_ENABLE 0x00000002U
+#define EDRAM0_ENABLE 0x00000001U
+
+#define MA_INT_CAUSE 0x77e0
+#define MEM_PERR_INT_CAUSE 0x00000002U
+#define MEM_WRAP_INT_CAUSE 0x00000001U
+
+#define MA_INT_WRAP_STATUS 0x77e4
+#define MEM_WRAP_ADDRESS_MASK 0xfffffff0U
+#define MEM_WRAP_ADDRESS_SHIFT 4
+#define MEM_WRAP_ADDRESS_GET(x) (((x) & MEM_WRAP_ADDRESS_MASK) >> MEM_WRAP_ADDRESS_SHIFT)
+#define MEM_WRAP_CLIENT_NUM_MASK 0x0000000fU
+#define MEM_WRAP_CLIENT_NUM_SHIFT 0
+#define MEM_WRAP_CLIENT_NUM_GET(x) (((x) & MEM_WRAP_CLIENT_NUM_MASK) >> MEM_WRAP_CLIENT_NUM_SHIFT)
+
+#define MA_PARITY_ERROR_STATUS 0x77f4
+
+#define EDC_0_BASE_ADDR 0x7900
+
+#define EDC_BIST_CMD 0x7904
+#define EDC_BIST_CMD_ADDR 0x7908
+#define EDC_BIST_CMD_LEN 0x790c
+#define EDC_BIST_DATA_PATTERN 0x7910
+#define EDC_BIST_STATUS_RDATA 0x7928
+#define EDC_INT_CAUSE 0x7978
+#define ECC_UE_PAR 0x00000020U
+#define ECC_CE_PAR 0x00000010U
+#define PERR_PAR_CAUSE 0x00000008U
+
+#define EDC_ECC_STATUS 0x797c
+
+#define EDC_1_BASE_ADDR 0x7980
+
+#define CIM_PF_MAILBOX_DATA 0x240
+#define CIM_PF_MAILBOX_CTRL 0x280
+#define MBMSGVALID 0x00000008U
+#define MBINTREQ 0x00000004U
+#define MBOWNER_MASK 0x00000003U
+#define MBOWNER_SHIFT 0
+#define MBOWNER(x) ((x) << MBOWNER_SHIFT)
+#define MBOWNER_GET(x) (((x) & MBOWNER_MASK) >> MBOWNER_SHIFT)
+
+#define CIM_PF_HOST_INT_CAUSE 0x28c
+#define MBMSGRDYINT 0x00080000U
+
+#define CIM_HOST_INT_CAUSE 0x7b2c
+#define TIEQOUTPARERRINT 0x00100000U
+#define TIEQINPARERRINT 0x00080000U
+#define MBHOSTPARERR 0x00040000U
+#define MBUPPARERR 0x00020000U
+#define IBQPARERR 0x0001f800U
+#define IBQTP0PARERR 0x00010000U
+#define IBQTP1PARERR 0x00008000U
+#define IBQULPPARERR 0x00004000U
+#define IBQSGELOPARERR 0x00002000U
+#define IBQSGEHIPARERR 0x00001000U
+#define IBQNCSIPARERR 0x00000800U
+#define OBQPARERR 0x000007e0U
+#define OBQULP0PARERR 0x00000400U
+#define OBQULP1PARERR 0x00000200U
+#define OBQULP2PARERR 0x00000100U
+#define OBQULP3PARERR 0x00000080U
+#define OBQSGEPARERR 0x00000040U
+#define OBQNCSIPARERR 0x00000020U
+#define PREFDROPINT 0x00000002U
+#define UPACCNONZERO 0x00000001U
+
+#define CIM_HOST_UPACC_INT_CAUSE 0x7b34
+#define EEPROMWRINT 0x40000000U
+#define TIMEOUTMAINT 0x20000000U
+#define TIMEOUTINT 0x10000000U
+#define RSPOVRLOOKUPINT 0x08000000U
+#define REQOVRLOOKUPINT 0x04000000U
+#define BLKWRPLINT 0x02000000U
+#define BLKRDPLINT 0x01000000U
+#define SGLWRPLINT 0x00800000U
+#define SGLRDPLINT 0x00400000U
+#define BLKWRCTLINT 0x00200000U
+#define BLKRDCTLINT 0x00100000U
+#define SGLWRCTLINT 0x00080000U
+#define SGLRDCTLINT 0x00040000U
+#define BLKWREEPROMINT 0x00020000U
+#define BLKRDEEPROMINT 0x00010000U
+#define SGLWREEPROMINT 0x00008000U
+#define SGLRDEEPROMINT 0x00004000U
+#define BLKWRFLASHINT 0x00002000U
+#define BLKRDFLASHINT 0x00001000U
+#define SGLWRFLASHINT 0x00000800U
+#define SGLRDFLASHINT 0x00000400U
+#define BLKWRBOOTINT 0x00000200U
+#define BLKRDBOOTINT 0x00000100U
+#define SGLWRBOOTINT 0x00000080U
+#define SGLRDBOOTINT 0x00000040U
+#define ILLWRBEINT 0x00000020U
+#define ILLRDBEINT 0x00000010U
+#define ILLRDINT 0x00000008U
+#define ILLWRINT 0x00000004U
+#define ILLTRANSINT 0x00000002U
+#define RSVDSPACEINT 0x00000001U
+
+#define TP_OUT_CONFIG 0x7d04
+#define VLANEXTENABLE_MASK 0x0000f000U
+#define VLANEXTENABLE_SHIFT 12
+
+#define TP_PARA_REG2 0x7d68
+#define MAXRXDATA_MASK 0xffff0000U
+#define MAXRXDATA_SHIFT 16
+#define MAXRXDATA_GET(x) (((x) & MAXRXDATA_MASK) >> MAXRXDATA_SHIFT)
+
+#define TP_TIMER_RESOLUTION 0x7d90
+#define TIMERRESOLUTION_MASK 0x00ff0000U
+#define TIMERRESOLUTION_SHIFT 16
+#define TIMERRESOLUTION_GET(x) (((x) & TIMERRESOLUTION_MASK) >> TIMERRESOLUTION_SHIFT)
+
+#define TP_SHIFT_CNT 0x7dc0
+
+#define TP_CCTRL_TABLE 0x7ddc
+#define TP_MTU_TABLE 0x7de4
+#define MTUINDEX_MASK 0xff000000U
+#define MTUINDEX_SHIFT 24
+#define MTUINDEX(x) ((x) << MTUINDEX_SHIFT)
+#define MTUWIDTH_MASK 0x000f0000U
+#define MTUWIDTH_SHIFT 16
+#define MTUWIDTH(x) ((x) << MTUWIDTH_SHIFT)
+#define MTUWIDTH_GET(x) (((x) & MTUWIDTH_MASK) >> MTUWIDTH_SHIFT)
+#define MTUVALUE_MASK 0x00003fffU
+#define MTUVALUE_SHIFT 0
+#define MTUVALUE(x) ((x) << MTUVALUE_SHIFT)
+#define MTUVALUE_GET(x) (((x) & MTUVALUE_MASK) >> MTUVALUE_SHIFT)
+
+#define TP_RSS_LKP_TABLE 0x7dec
+#define LKPTBLROWVLD 0x80000000U
+#define LKPTBLQUEUE1_MASK 0x000ffc00U
+#define LKPTBLQUEUE1_SHIFT 10
+#define LKPTBLQUEUE1(x) ((x) << LKPTBLQUEUE1_SHIFT)
+#define LKPTBLQUEUE1_GET(x) (((x) & LKPTBLQUEUE1_MASK) >> LKPTBLQUEUE1_SHIFT)
+#define LKPTBLQUEUE0_MASK 0x000003ffU
+#define LKPTBLQUEUE0_SHIFT 0
+#define LKPTBLQUEUE0(x) ((x) << LKPTBLQUEUE0_SHIFT)
+#define LKPTBLQUEUE0_GET(x) (((x) & LKPTBLQUEUE0_MASK) >> LKPTBLQUEUE0_SHIFT)
+
+#define TP_PIO_ADDR 0x7e40
+#define TP_PIO_DATA 0x7e44
+#define TP_MIB_INDEX 0x7e50
+#define TP_MIB_DATA 0x7e54
+#define TP_INT_CAUSE 0x7e74
+#define FLMTXFLSTEMPTY 0x40000000U
+
+#define TP_INGRESS_CONFIG 0x141
+#define VNIC 0x00000800U
+#define CSUM_HAS_PSEUDO_HDR 0x00000400U
+#define RM_OVLAN 0x00000200U
+#define LOOKUPEVERYPKT 0x00000100U
+
+#define TP_MIB_MAC_IN_ERR_0 0x0
+#define TP_MIB_TCP_OUT_RST 0xc
+#define TP_MIB_TCP_IN_SEG_HI 0x10
+#define TP_MIB_TCP_IN_SEG_LO 0x11
+#define TP_MIB_TCP_OUT_SEG_HI 0x12
+#define TP_MIB_TCP_OUT_SEG_LO 0x13
+#define TP_MIB_TCP_RXT_SEG_HI 0x14
+#define TP_MIB_TCP_RXT_SEG_LO 0x15
+#define TP_MIB_TNL_CNG_DROP_0 0x18
+#define TP_MIB_TCP_V6IN_ERR_0 0x28
+#define TP_MIB_TCP_V6OUT_RST 0x2c
+#define TP_MIB_OFD_ARP_DROP 0x36
+#define TP_MIB_TNL_DROP_0 0x44
+#define TP_MIB_OFD_VLN_DROP_0 0x58
+
+#define ULP_TX_INT_CAUSE 0x8dcc
+#define PBL_BOUND_ERR_CH3 0x80000000U
+#define PBL_BOUND_ERR_CH2 0x40000000U
+#define PBL_BOUND_ERR_CH1 0x20000000U
+#define PBL_BOUND_ERR_CH0 0x10000000U
+
+#define PM_RX_INT_CAUSE 0x8fdc
+#define ZERO_E_CMD_ERROR 0x00400000U
+#define PMRX_FRAMING_ERROR 0x003ffff0U
+#define OCSPI_PAR_ERROR 0x00000008U
+#define DB_OPTIONS_PAR_ERROR 0x00000004U
+#define IESPI_PAR_ERROR 0x00000002U
+#define E_PCMD_PAR_ERROR 0x00000001U
+
+#define PM_TX_INT_CAUSE 0x8ffc
+#define PCMD_LEN_OVFL0 0x80000000U
+#define PCMD_LEN_OVFL1 0x40000000U
+#define PCMD_LEN_OVFL2 0x20000000U
+#define ZERO_C_CMD_ERROR 0x10000000U
+#define PMTX_FRAMING_ERROR 0x0ffffff0U
+#define OESPI_PAR_ERROR 0x00000008U
+#define ICSPI_PAR_ERROR 0x00000002U
+#define C_PCMD_PAR_ERROR 0x00000001U
+
+#define MPS_PORT_STAT_TX_PORT_BYTES_L 0x400
+#define MPS_PORT_STAT_TX_PORT_BYTES_H 0x404
+#define MPS_PORT_STAT_TX_PORT_FRAMES_L 0x408
+#define MPS_PORT_STAT_TX_PORT_FRAMES_H 0x40c
+#define MPS_PORT_STAT_TX_PORT_BCAST_L 0x410
+#define MPS_PORT_STAT_TX_PORT_BCAST_H 0x414
+#define MPS_PORT_STAT_TX_PORT_MCAST_L 0x418
+#define MPS_PORT_STAT_TX_PORT_MCAST_H 0x41c
+#define MPS_PORT_STAT_TX_PORT_UCAST_L 0x420
+#define MPS_PORT_STAT_TX_PORT_UCAST_H 0x424
+#define MPS_PORT_STAT_TX_PORT_ERROR_L 0x428
+#define MPS_PORT_STAT_TX_PORT_ERROR_H 0x42c
+#define MPS_PORT_STAT_TX_PORT_64B_L 0x430
+#define MPS_PORT_STAT_TX_PORT_64B_H 0x434
+#define MPS_PORT_STAT_TX_PORT_65B_127B_L 0x438
+#define MPS_PORT_STAT_TX_PORT_65B_127B_H 0x43c
+#define MPS_PORT_STAT_TX_PORT_128B_255B_L 0x440
+#define MPS_PORT_STAT_TX_PORT_128B_255B_H 0x444
+#define MPS_PORT_STAT_TX_PORT_256B_511B_L 0x448
+#define MPS_PORT_STAT_TX_PORT_256B_511B_H 0x44c
+#define MPS_PORT_STAT_TX_PORT_512B_1023B_L 0x450
+#define MPS_PORT_STAT_TX_PORT_512B_1023B_H 0x454
+#define MPS_PORT_STAT_TX_PORT_1024B_1518B_L 0x458
+#define MPS_PORT_STAT_TX_PORT_1024B_1518B_H 0x45c
+#define MPS_PORT_STAT_TX_PORT_1519B_MAX_L 0x460
+#define MPS_PORT_STAT_TX_PORT_1519B_MAX_H 0x464
+#define MPS_PORT_STAT_TX_PORT_DROP_L 0x468
+#define MPS_PORT_STAT_TX_PORT_DROP_H 0x46c
+#define MPS_PORT_STAT_TX_PORT_PAUSE_L 0x470
+#define MPS_PORT_STAT_TX_PORT_PAUSE_H 0x474
+#define MPS_PORT_STAT_TX_PORT_PPP0_L 0x478
+#define MPS_PORT_STAT_TX_PORT_PPP0_H 0x47c
+#define MPS_PORT_STAT_TX_PORT_PPP1_L 0x480
+#define MPS_PORT_STAT_TX_PORT_PPP1_H 0x484
+#define MPS_PORT_STAT_TX_PORT_PPP2_L 0x488
+#define MPS_PORT_STAT_TX_PORT_PPP2_H 0x48c
+#define MPS_PORT_STAT_TX_PORT_PPP3_L 0x490
+#define MPS_PORT_STAT_TX_PORT_PPP3_H 0x494
+#define MPS_PORT_STAT_TX_PORT_PPP4_L 0x498
+#define MPS_PORT_STAT_TX_PORT_PPP4_H 0x49c
+#define MPS_PORT_STAT_TX_PORT_PPP5_L 0x4a0
+#define MPS_PORT_STAT_TX_PORT_PPP5_H 0x4a4
+#define MPS_PORT_STAT_TX_PORT_PPP6_L 0x4a8
+#define MPS_PORT_STAT_TX_PORT_PPP6_H 0x4ac
+#define MPS_PORT_STAT_TX_PORT_PPP7_L 0x4b0
+#define MPS_PORT_STAT_TX_PORT_PPP7_H 0x4b4
+#define MPS_PORT_STAT_LB_PORT_BYTES_L 0x4c0
+#define MPS_PORT_STAT_LB_PORT_BYTES_H 0x4c4
+#define MPS_PORT_STAT_LB_PORT_FRAMES_L 0x4c8
+#define MPS_PORT_STAT_LB_PORT_FRAMES_H 0x4cc
+#define MPS_PORT_STAT_LB_PORT_BCAST_L 0x4d0
+#define MPS_PORT_STAT_LB_PORT_BCAST_H 0x4d4
+#define MPS_PORT_STAT_LB_PORT_MCAST_L 0x4d8
+#define MPS_PORT_STAT_LB_PORT_MCAST_H 0x4dc
+#define MPS_PORT_STAT_LB_PORT_UCAST_L 0x4e0
+#define MPS_PORT_STAT_LB_PORT_UCAST_H 0x4e4
+#define MPS_PORT_STAT_LB_PORT_ERROR_L 0x4e8
+#define MPS_PORT_STAT_LB_PORT_ERROR_H 0x4ec
+#define MPS_PORT_STAT_LB_PORT_64B_L 0x4f0
+#define MPS_PORT_STAT_LB_PORT_64B_H 0x4f4
+#define MPS_PORT_STAT_LB_PORT_65B_127B_L 0x4f8
+#define MPS_PORT_STAT_LB_PORT_65B_127B_H 0x4fc
+#define MPS_PORT_STAT_LB_PORT_128B_255B_L 0x500
+#define MPS_PORT_STAT_LB_PORT_128B_255B_H 0x504
+#define MPS_PORT_STAT_LB_PORT_256B_511B_L 0x508
+#define MPS_PORT_STAT_LB_PORT_256B_511B_H 0x50c
+#define MPS_PORT_STAT_LB_PORT_512B_1023B_L 0x510
+#define MPS_PORT_STAT_LB_PORT_512B_1023B_H 0x514
+#define MPS_PORT_STAT_LB_PORT_1024B_1518B_L 0x518
+#define MPS_PORT_STAT_LB_PORT_1024B_1518B_H 0x51c
+#define MPS_PORT_STAT_LB_PORT_1519B_MAX_L 0x520
+#define MPS_PORT_STAT_LB_PORT_1519B_MAX_H 0x524
+#define MPS_PORT_STAT_LB_PORT_DROP_FRAMES 0x528
+#define MPS_PORT_STAT_RX_PORT_BYTES_L 0x540
+#define MPS_PORT_STAT_RX_PORT_BYTES_H 0x544
+#define MPS_PORT_STAT_RX_PORT_FRAMES_L 0x548
+#define MPS_PORT_STAT_RX_PORT_FRAMES_H 0x54c
+#define MPS_PORT_STAT_RX_PORT_BCAST_L 0x550
+#define MPS_PORT_STAT_RX_PORT_BCAST_H 0x554
+#define MPS_PORT_STAT_RX_PORT_MCAST_L 0x558
+#define MPS_PORT_STAT_RX_PORT_MCAST_H 0x55c
+#define MPS_PORT_STAT_RX_PORT_UCAST_L 0x560
+#define MPS_PORT_STAT_RX_PORT_UCAST_H 0x564
+#define MPS_PORT_STAT_RX_PORT_MTU_ERROR_L 0x568
+#define MPS_PORT_STAT_RX_PORT_MTU_ERROR_H 0x56c
+#define MPS_PORT_STAT_RX_PORT_MTU_CRC_ERROR_L 0x570
+#define MPS_PORT_STAT_RX_PORT_MTU_CRC_ERROR_H 0x574
+#define MPS_PORT_STAT_RX_PORT_CRC_ERROR_L 0x578
+#define MPS_PORT_STAT_RX_PORT_CRC_ERROR_H 0x57c
+#define MPS_PORT_STAT_RX_PORT_LEN_ERROR_L 0x580
+#define MPS_PORT_STAT_RX_PORT_LEN_ERROR_H 0x584
+#define MPS_PORT_STAT_RX_PORT_SYM_ERROR_L 0x588
+#define MPS_PORT_STAT_RX_PORT_SYM_ERROR_H 0x58c
+#define MPS_PORT_STAT_RX_PORT_64B_L 0x590
+#define MPS_PORT_STAT_RX_PORT_64B_H 0x594
+#define MPS_PORT_STAT_RX_PORT_65B_127B_L 0x598
+#define MPS_PORT_STAT_RX_PORT_65B_127B_H 0x59c
+#define MPS_PORT_STAT_RX_PORT_128B_255B_L 0x5a0
+#define MPS_PORT_STAT_RX_PORT_128B_255B_H 0x5a4
+#define MPS_PORT_STAT_RX_PORT_256B_511B_L 0x5a8
+#define MPS_PORT_STAT_RX_PORT_256B_511B_H 0x5ac
+#define MPS_PORT_STAT_RX_PORT_512B_1023B_L 0x5b0
+#define MPS_PORT_STAT_RX_PORT_512B_1023B_H 0x5b4
+#define MPS_PORT_STAT_RX_PORT_1024B_1518B_L 0x5b8
+#define MPS_PORT_STAT_RX_PORT_1024B_1518B_H 0x5bc
+#define MPS_PORT_STAT_RX_PORT_1519B_MAX_L 0x5c0
+#define MPS_PORT_STAT_RX_PORT_1519B_MAX_H 0x5c4
+#define MPS_PORT_STAT_RX_PORT_PAUSE_L 0x5c8
+#define MPS_PORT_STAT_RX_PORT_PAUSE_H 0x5cc
+#define MPS_PORT_STAT_RX_PORT_PPP0_L 0x5d0
+#define MPS_PORT_STAT_RX_PORT_PPP0_H 0x5d4
+#define MPS_PORT_STAT_RX_PORT_PPP1_L 0x5d8
+#define MPS_PORT_STAT_RX_PORT_PPP1_H 0x5dc
+#define MPS_PORT_STAT_RX_PORT_PPP2_L 0x5e0
+#define MPS_PORT_STAT_RX_PORT_PPP2_H 0x5e4
+#define MPS_PORT_STAT_RX_PORT_PPP3_L 0x5e8
+#define MPS_PORT_STAT_RX_PORT_PPP3_H 0x5ec
+#define MPS_PORT_STAT_RX_PORT_PPP4_L 0x5f0
+#define MPS_PORT_STAT_RX_PORT_PPP4_H 0x5f4
+#define MPS_PORT_STAT_RX_PORT_PPP5_L 0x5f8
+#define MPS_PORT_STAT_RX_PORT_PPP5_H 0x5fc
+#define MPS_PORT_STAT_RX_PORT_PPP6_L 0x600
+#define MPS_PORT_STAT_RX_PORT_PPP6_H 0x604
+#define MPS_PORT_STAT_RX_PORT_PPP7_L 0x608
+#define MPS_PORT_STAT_RX_PORT_PPP7_H 0x60c
+#define MPS_PORT_STAT_RX_PORT_LESS_64B_L 0x610
+#define MPS_PORT_STAT_RX_PORT_LESS_64B_H 0x614
+#define MPS_CMN_CTL 0x9000
+#define NUMPORTS_MASK 0x00000003U
+#define NUMPORTS_SHIFT 0
+#define NUMPORTS_GET(x) (((x) & NUMPORTS_MASK) >> NUMPORTS_SHIFT)
+
+#define MPS_INT_CAUSE 0x9008
+#define STATINT 0x00000020U
+#define TXINT 0x00000010U
+#define RXINT 0x00000008U
+#define TRCINT 0x00000004U
+#define CLSINT 0x00000002U
+#define PLINT 0x00000001U
+
+#define MPS_TX_INT_CAUSE 0x9408
+#define PORTERR 0x00010000U
+#define FRMERR 0x00008000U
+#define SECNTERR 0x00004000U
+#define BUBBLE 0x00002000U
+#define TXDESCFIFO 0x00001e00U
+#define TXDATAFIFO 0x000001e0U
+#define NCSIFIFO 0x00000010U
+#define TPFIFO 0x0000000fU
+
+#define MPS_STAT_PERR_INT_CAUSE_SRAM 0x9614
+#define MPS_STAT_PERR_INT_CAUSE_TX_FIFO 0x9620
+#define MPS_STAT_PERR_INT_CAUSE_RX_FIFO 0x962c
+
+#define MPS_STAT_RX_BG_0_MAC_DROP_FRAME_L 0x9640
+#define MPS_STAT_RX_BG_0_MAC_DROP_FRAME_H 0x9644
+#define MPS_STAT_RX_BG_1_MAC_DROP_FRAME_L 0x9648
+#define MPS_STAT_RX_BG_1_MAC_DROP_FRAME_H 0x964c
+#define MPS_STAT_RX_BG_2_MAC_DROP_FRAME_L 0x9650
+#define MPS_STAT_RX_BG_2_MAC_DROP_FRAME_H 0x9654
+#define MPS_STAT_RX_BG_3_MAC_DROP_FRAME_L 0x9658
+#define MPS_STAT_RX_BG_3_MAC_DROP_FRAME_H 0x965c
+#define MPS_STAT_RX_BG_0_LB_DROP_FRAME_L 0x9660
+#define MPS_STAT_RX_BG_0_LB_DROP_FRAME_H 0x9664
+#define MPS_STAT_RX_BG_1_LB_DROP_FRAME_L 0x9668
+#define MPS_STAT_RX_BG_1_LB_DROP_FRAME_H 0x966c
+#define MPS_STAT_RX_BG_2_LB_DROP_FRAME_L 0x9670
+#define MPS_STAT_RX_BG_2_LB_DROP_FRAME_H 0x9674
+#define MPS_STAT_RX_BG_3_LB_DROP_FRAME_L 0x9678
+#define MPS_STAT_RX_BG_3_LB_DROP_FRAME_H 0x967c
+#define MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_L 0x9680
+#define MPS_STAT_RX_BG_0_MAC_TRUNC_FRAME_H 0x9684
+#define MPS_STAT_RX_BG_1_MAC_TRUNC_FRAME_L 0x9688
+#define MPS_STAT_RX_BG_1_MAC_TRUNC_FRAME_H 0x968c
+#define MPS_STAT_RX_BG_2_MAC_TRUNC_FRAME_L 0x9690
+#define MPS_STAT_RX_BG_2_MAC_TRUNC_FRAME_H 0x9694
+#define MPS_STAT_RX_BG_3_MAC_TRUNC_FRAME_L 0x9698
+#define MPS_STAT_RX_BG_3_MAC_TRUNC_FRAME_H 0x969c
+#define MPS_STAT_RX_BG_0_LB_TRUNC_FRAME_L 0x96a0
+#define MPS_STAT_RX_BG_0_LB_TRUNC_FRAME_H 0x96a4
+#define MPS_STAT_RX_BG_1_LB_TRUNC_FRAME_L 0x96a8
+#define MPS_STAT_RX_BG_1_LB_TRUNC_FRAME_H 0x96ac
+#define MPS_STAT_RX_BG_2_LB_TRUNC_FRAME_L 0x96b0
+#define MPS_STAT_RX_BG_2_LB_TRUNC_FRAME_H 0x96b4
+#define MPS_STAT_RX_BG_3_LB_TRUNC_FRAME_L 0x96b8
+#define MPS_STAT_RX_BG_3_LB_TRUNC_FRAME_H 0x96bc
+#define MPS_TRC_CFG 0x9800
+#define TRCFIFOEMPTY 0x00000010U
+#define TRCIGNOREDROPINPUT 0x00000008U
+#define TRCKEEPDUPLICATES 0x00000004U
+#define TRCEN 0x00000002U
+#define TRCMULTIFILTER 0x00000001U
+
+#define MPS_TRC_RSS_CONTROL 0x9808
+#define RSSCONTROL_MASK 0x00ff0000U
+#define RSSCONTROL_SHIFT 16
+#define RSSCONTROL(x) ((x) << RSSCONTROL_SHIFT)
+#define QUEUENUMBER_MASK 0x0000ffffU
+#define QUEUENUMBER_SHIFT 0
+#define QUEUENUMBER(x) ((x) << QUEUENUMBER_SHIFT)
+
+#define MPS_TRC_FILTER_MATCH_CTL_A 0x9810
+#define TFINVERTMATCH 0x01000000U
+#define TFPKTTOOLARGE 0x00800000U
+#define TFEN 0x00400000U
+#define TFPORT_MASK 0x003c0000U
+#define TFPORT_SHIFT 18
+#define TFPORT(x) ((x) << TFPORT_SHIFT)
+#define TFPORT_GET(x) (((x) & TFPORT_MASK) >> TFPORT_SHIFT)
+#define TFDROP 0x00020000U
+#define TFSOPEOPERR 0x00010000U
+#define TFLENGTH_MASK 0x00001f00U
+#define TFLENGTH_SHIFT 8
+#define TFLENGTH(x) ((x) << TFLENGTH_SHIFT)
+#define TFLENGTH_GET(x) (((x) & TFLENGTH_MASK) >> TFLENGTH_SHIFT)
+#define TFOFFSET_MASK 0x0000001fU
+#define TFOFFSET_SHIFT 0
+#define TFOFFSET(x) ((x) << TFOFFSET_SHIFT)
+#define TFOFFSET_GET(x) (((x) & TFOFFSET_MASK) >> TFOFFSET_SHIFT)
+
+#define MPS_TRC_FILTER_MATCH_CTL_B 0x9820
+#define TFMINPKTSIZE_MASK 0x01ff0000U
+#define TFMINPKTSIZE_SHIFT 16
+#define TFMINPKTSIZE(x) ((x) << TFMINPKTSIZE_SHIFT)
+#define TFMINPKTSIZE_GET(x) (((x) & TFMINPKTSIZE_MASK) >> TFMINPKTSIZE_SHIFT)
+#define TFCAPTUREMAX_MASK 0x00003fffU
+#define TFCAPTUREMAX_SHIFT 0
+#define TFCAPTUREMAX(x) ((x) << TFCAPTUREMAX_SHIFT)
+#define TFCAPTUREMAX_GET(x) (((x) & TFCAPTUREMAX_MASK) >> TFCAPTUREMAX_SHIFT)
+
+#define MPS_TRC_INT_CAUSE 0x985c
+#define MISCPERR 0x00000100U
+#define PKTFIFO 0x000000f0U
+#define FILTMEM 0x0000000fU
+
+#define MPS_TRC_FILTER0_MATCH 0x9c00
+#define MPS_TRC_FILTER0_DONT_CARE 0x9c80
+#define MPS_TRC_FILTER1_MATCH 0x9d00
+#define MPS_CLS_INT_CAUSE 0xd028
+#define PLERRENB 0x00000008U
+#define HASHSRAM 0x00000004U
+#define MATCHTCAM 0x00000002U
+#define MATCHSRAM 0x00000001U
+
+#define MPS_RX_PERR_INT_CAUSE 0x11074
+
+#define CPL_INTR_CAUSE 0x19054
+#define CIM_OP_MAP_PERR 0x00000020U
+#define CIM_OVFL_ERROR 0x00000010U
+#define TP_FRAMING_ERROR 0x00000008U
+#define SGE_FRAMING_ERROR 0x00000004U
+#define CIM_FRAMING_ERROR 0x00000002U
+#define ZERO_SWITCH_ERROR 0x00000001U
+
+#define SMB_INT_CAUSE 0x19090
+#define MSTTXFIFOPARINT 0x00200000U
+#define MSTRXFIFOPARINT 0x00100000U
+#define SLVFIFOPARINT 0x00080000U
+
+#define ULP_RX_INT_CAUSE 0x19158
+#define ULP_RX_ISCSI_TAGMASK 0x19164
+#define ULP_RX_ISCSI_PSZ 0x19168
+#define HPZ3_MASK 0x0f000000U
+#define HPZ3_SHIFT 24
+#define HPZ3(x) ((x) << HPZ3_SHIFT)
+#define HPZ2_MASK 0x000f0000U
+#define HPZ2_SHIFT 16
+#define HPZ2(x) ((x) << HPZ2_SHIFT)
+#define HPZ1_MASK 0x00000f00U
+#define HPZ1_SHIFT 8
+#define HPZ1(x) ((x) << HPZ1_SHIFT)
+#define HPZ0_MASK 0x0000000fU
+#define HPZ0_SHIFT 0
+#define HPZ0(x) ((x) << HPZ0_SHIFT)
+
+#define ULP_RX_TDDP_PSZ 0x19178
+
+#define SF_DATA 0x193f8
+#define SF_OP 0x193fc
+#define BUSY 0x80000000U
+#define SF_LOCK 0x00000010U
+#define SF_CONT 0x00000008U
+#define BYTECNT_MASK 0x00000006U
+#define BYTECNT_SHIFT 1
+#define BYTECNT(x) ((x) << BYTECNT_SHIFT)
+#define OP_WR 0x00000001U
+
+#define PL_PF_INT_CAUSE 0x3c0
+#define PFSW 0x00000008U
+#define PFSGE 0x00000004U
+#define PFCIM 0x00000002U
+#define PFMPS 0x00000001U
+
+#define PL_PF_INT_ENABLE 0x3c4
+#define PL_PF_CTL 0x3c8
+#define SWINT 0x00000001U
+
+#define PL_WHOAMI 0x19400
+#define SOURCEPF_MASK 0x00000700U
+#define SOURCEPF_SHIFT 8
+#define SOURCEPF(x) ((x) << SOURCEPF_SHIFT)
+#define SOURCEPF_GET(x) (((x) & SOURCEPF_MASK) >> SOURCEPF_SHIFT)
+#define ISVF 0x00000080U
+#define VFID_MASK 0x0000007fU
+#define VFID_SHIFT 0
+#define VFID(x) ((x) << VFID_SHIFT)
+#define VFID_GET(x) (((x) & VFID_MASK) >> VFID_SHIFT)
+
+#define PL_INT_CAUSE 0x1940c
+#define ULP_TX 0x08000000U
+#define SGE 0x04000000U
+#define HMA 0x02000000U
+#define CPL_SWITCH 0x01000000U
+#define ULP_RX 0x00800000U
+#define PM_RX 0x00400000U
+#define PM_TX 0x00200000U
+#define MA 0x00100000U
+#define TP 0x00080000U
+#define LE 0x00040000U
+#define EDC1 0x00020000U
+#define EDC0 0x00010000U
+#define MC 0x00008000U
+#define PCIE 0x00004000U
+#define PMU 0x00002000U
+#define XGMAC_KR1 0x00001000U
+#define XGMAC_KR0 0x00000800U
+#define XGMAC1 0x00000400U
+#define XGMAC0 0x00000200U
+#define SMB 0x00000100U
+#define SF 0x00000080U
+#define PL 0x00000040U
+#define NCSI 0x00000020U
+#define MPS 0x00000010U
+#define MI 0x00000008U
+#define DBG 0x00000004U
+#define I2CM 0x00000002U
+#define CIM 0x00000001U
+
+#define PL_INT_MAP0 0x19414
+#define PL_RST 0x19428
+#define PIORST 0x00000002U
+#define PIORSTMODE 0x00000001U
+
+#define PL_PL_INT_CAUSE 0x19430
+#define FATALPERR 0x00000010U
+#define PERRVFID 0x00000001U
+
+#define PL_REV 0x1943c
+
+#define LE_DB_CONFIG 0x19c04
+#define HASHEN 0x00100000U
+
+#define LE_DB_SERVER_INDEX 0x19c18
+#define LE_DB_ACT_CNT_IPV4 0x19c20
+#define LE_DB_ACT_CNT_IPV6 0x19c24
+
+#define LE_DB_INT_CAUSE 0x19c3c
+#define REQQPARERR 0x00010000U
+#define UNKNOWNCMD 0x00008000U
+#define PARITYERR 0x00000040U
+#define LIPMISS 0x00000020U
+#define LIP0 0x00000010U
+
+#define LE_DB_TID_HASHBASE 0x19df8
+
+#define NCSI_INT_CAUSE 0x1a0d8
+#define CIM_DM_PRTY_ERR 0x00000100U
+#define MPS_DM_PRTY_ERR 0x00000080U
+#define TXFIFO_PRTY_ERR 0x00000002U
+#define RXFIFO_PRTY_ERR 0x00000001U
+
+#define XGMAC_PORT_CFG2 0x1018
+#define PATEN 0x00040000U
+#define MAGICEN 0x00020000U
+
+#define XGMAC_PORT_MAGIC_MACID_LO 0x1024
+#define XGMAC_PORT_MAGIC_MACID_HI 0x1028
+
+#define XGMAC_PORT_EPIO_DATA0 0x10c0
+#define XGMAC_PORT_EPIO_DATA1 0x10c4
+#define XGMAC_PORT_EPIO_DATA2 0x10c8
+#define XGMAC_PORT_EPIO_DATA3 0x10cc
+#define XGMAC_PORT_EPIO_OP 0x10d0
+#define EPIOWR 0x00000100U
+#define ADDRESS_MASK 0x000000ffU
+#define ADDRESS_SHIFT 0
+#define ADDRESS(x) ((x) << ADDRESS_SHIFT)
+
+#define XGMAC_PORT_INT_CAUSE 0x10dc
+#endif /* __T4_REGS_H */
--- /dev/null
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _T4FW_INTERFACE_H_
+#define _T4FW_INTERFACE_H_
+
+#define FW_T4VF_SGE_BASE_ADDR 0x0000
+#define FW_T4VF_MPS_BASE_ADDR 0x0100
+#define FW_T4VF_PL_BASE_ADDR 0x0200
+#define FW_T4VF_MBDATA_BASE_ADDR 0x0240
+#define FW_T4VF_CIM_BASE_ADDR 0x0300
+
+enum fw_wr_opcodes {
+ FW_FILTER_WR = 0x02,
+ FW_ULPTX_WR = 0x04,
+ FW_TP_WR = 0x05,
+ FW_ETH_TX_PKT_WR = 0x08,
+ FW_FLOWC_WR = 0x0a,
+ FW_OFLD_TX_DATA_WR = 0x0b,
+ FW_CMD_WR = 0x10,
+ FW_ETH_TX_PKT_VM_WR = 0x11,
+ FW_RI_RES_WR = 0x0c,
+ FW_RI_INIT_WR = 0x0d,
+ FW_RI_RDMA_WRITE_WR = 0x14,
+ FW_RI_SEND_WR = 0x15,
+ FW_RI_RDMA_READ_WR = 0x16,
+ FW_RI_RECV_WR = 0x17,
+ FW_RI_BIND_MW_WR = 0x18,
+ FW_RI_FR_NSMR_WR = 0x19,
+ FW_RI_INV_LSTAG_WR = 0x1a,
+ FW_LASTC2E_WR = 0x40
+};
+
+struct fw_wr_hdr {
+ __be32 hi;
+ __be32 lo;
+};
+
+#define FW_WR_OP(x) ((x) << 24)
+#define FW_WR_ATOMIC(x) ((x) << 23)
+#define FW_WR_FLUSH(x) ((x) << 22)
+#define FW_WR_COMPL(x) ((x) << 21)
+#define FW_WR_IMMDLEN(x) ((x) << 0)
+
+#define FW_WR_EQUIQ (1U << 31)
+#define FW_WR_EQUEQ (1U << 30)
+#define FW_WR_FLOWID(x) ((x) << 8)
+#define FW_WR_LEN16(x) ((x) << 0)
+
+struct fw_ulptx_wr {
+ __be32 op_to_compl;
+ __be32 flowid_len16;
+ u64 cookie;
+};
+
+struct fw_tp_wr {
+ __be32 op_to_immdlen;
+ __be32 flowid_len16;
+ u64 cookie;
+};
+
+struct fw_eth_tx_pkt_wr {
+ __be32 op_immdlen;
+ __be32 equiq_to_len16;
+ __be64 r3;
+};
+
+enum fw_flowc_mnem {
+ FW_FLOWC_MNEM_PFNVFN, /* PFN [15:8] VFN [7:0] */
+ FW_FLOWC_MNEM_CH,
+ FW_FLOWC_MNEM_PORT,
+ FW_FLOWC_MNEM_IQID,
+ FW_FLOWC_MNEM_SNDNXT,
+ FW_FLOWC_MNEM_RCVNXT,
+ FW_FLOWC_MNEM_SNDBUF,
+ FW_FLOWC_MNEM_MSS,
+};
+
+struct fw_flowc_mnemval {
+ u8 mnemonic;
+ u8 r4[3];
+ __be32 val;
+};
+
+struct fw_flowc_wr {
+ __be32 op_to_nparams;
+#define FW_FLOWC_WR_NPARAMS(x) ((x) << 0)
+ __be32 flowid_len16;
+ struct fw_flowc_mnemval mnemval[0];
+};
+
+struct fw_ofld_tx_data_wr {
+ __be32 op_to_immdlen;
+ __be32 flowid_len16;
+ __be32 plen;
+ __be32 tunnel_to_proxy;
+#define FW_OFLD_TX_DATA_WR_TUNNEL(x) ((x) << 19)
+#define FW_OFLD_TX_DATA_WR_SAVE(x) ((x) << 18)
+#define FW_OFLD_TX_DATA_WR_FLUSH(x) ((x) << 17)
+#define FW_OFLD_TX_DATA_WR_URGENT(x) ((x) << 16)
+#define FW_OFLD_TX_DATA_WR_MORE(x) ((x) << 15)
+#define FW_OFLD_TX_DATA_WR_SHOVE(x) ((x) << 14)
+#define FW_OFLD_TX_DATA_WR_ULPMODE(x) ((x) << 10)
+#define FW_OFLD_TX_DATA_WR_ULPSUBMODE(x) ((x) << 6)
+};
+
+struct fw_cmd_wr {
+ __be32 op_dma;
+#define FW_CMD_WR_DMA (1U << 17)
+ __be32 len16_pkd;
+ __be64 cookie_daddr;
+};
+
+struct fw_eth_tx_pkt_vm_wr {
+ __be32 op_immdlen;
+ __be32 equiq_to_len16;
+ __be32 r3[2];
+ u8 ethmacdst[6];
+ u8 ethmacsrc[6];
+ __be16 ethtype;
+ __be16 vlantci;
+};
+
+#define FW_CMD_MAX_TIMEOUT 3000
+
+enum fw_cmd_opcodes {
+ FW_LDST_CMD = 0x01,
+ FW_RESET_CMD = 0x03,
+ FW_HELLO_CMD = 0x04,
+ FW_BYE_CMD = 0x05,
+ FW_INITIALIZE_CMD = 0x06,
+ FW_CAPS_CONFIG_CMD = 0x07,
+ FW_PARAMS_CMD = 0x08,
+ FW_PFVF_CMD = 0x09,
+ FW_IQ_CMD = 0x10,
+ FW_EQ_MNGT_CMD = 0x11,
+ FW_EQ_ETH_CMD = 0x12,
+ FW_EQ_CTRL_CMD = 0x13,
+ FW_EQ_OFLD_CMD = 0x21,
+ FW_VI_CMD = 0x14,
+ FW_VI_MAC_CMD = 0x15,
+ FW_VI_RXMODE_CMD = 0x16,
+ FW_VI_ENABLE_CMD = 0x17,
+ FW_ACL_MAC_CMD = 0x18,
+ FW_ACL_VLAN_CMD = 0x19,
+ FW_VI_STATS_CMD = 0x1a,
+ FW_PORT_CMD = 0x1b,
+ FW_PORT_STATS_CMD = 0x1c,
+ FW_PORT_LB_STATS_CMD = 0x1d,
+ FW_PORT_TRACE_CMD = 0x1e,
+ FW_PORT_TRACE_MMAP_CMD = 0x1f,
+ FW_RSS_IND_TBL_CMD = 0x20,
+ FW_RSS_GLB_CONFIG_CMD = 0x22,
+ FW_RSS_VI_CONFIG_CMD = 0x23,
+ FW_LASTC2E_CMD = 0x40,
+ FW_ERROR_CMD = 0x80,
+ FW_DEBUG_CMD = 0x81,
+};
+
+enum fw_cmd_cap {
+ FW_CMD_CAP_PF = 0x01,
+ FW_CMD_CAP_DMAQ = 0x02,
+ FW_CMD_CAP_PORT = 0x04,
+ FW_CMD_CAP_PORTPROMISC = 0x08,
+ FW_CMD_CAP_PORTSTATS = 0x10,
+ FW_CMD_CAP_VF = 0x80,
+};
+
+/*
+ * Generic command header flit0
+ */
+struct fw_cmd_hdr {
+ __be32 hi;
+ __be32 lo;
+};
+
+#define FW_CMD_OP(x) ((x) << 24)
+#define FW_CMD_OP_GET(x) (((x) >> 24) & 0xff)
+#define FW_CMD_REQUEST (1U << 23)
+#define FW_CMD_READ (1U << 22)
+#define FW_CMD_WRITE (1U << 21)
+#define FW_CMD_EXEC (1U << 20)
+#define FW_CMD_RAMASK(x) ((x) << 20)
+#define FW_CMD_RETVAL(x) ((x) << 8)
+#define FW_CMD_RETVAL_GET(x) (((x) >> 8) & 0xff)
+#define FW_CMD_LEN16(x) ((x) << 0)
+
+enum fw_ldst_addrspc {
+ FW_LDST_ADDRSPC_FIRMWARE = 0x0001,
+ FW_LDST_ADDRSPC_SGE_EGRC = 0x0008,
+ FW_LDST_ADDRSPC_SGE_INGC = 0x0009,
+ FW_LDST_ADDRSPC_SGE_FLMC = 0x000a,
+ FW_LDST_ADDRSPC_SGE_CONMC = 0x000b,
+ FW_LDST_ADDRSPC_TP_PIO = 0x0010,
+ FW_LDST_ADDRSPC_TP_TM_PIO = 0x0011,
+ FW_LDST_ADDRSPC_TP_MIB = 0x0012,
+ FW_LDST_ADDRSPC_MDIO = 0x0018,
+ FW_LDST_ADDRSPC_MPS = 0x0020,
+ FW_LDST_ADDRSPC_FUNC = 0x0028
+};
+
+enum fw_ldst_mps_fid {
+ FW_LDST_MPS_ATRB,
+ FW_LDST_MPS_RPLC
+};
+
+enum fw_ldst_func_access_ctl {
+ FW_LDST_FUNC_ACC_CTL_VIID,
+ FW_LDST_FUNC_ACC_CTL_FID
+};
+
+enum fw_ldst_func_mod_index {
+ FW_LDST_FUNC_MPS
+};
+
+struct fw_ldst_cmd {
+ __be32 op_to_addrspace;
+#define FW_LDST_CMD_ADDRSPACE(x) ((x) << 0)
+ __be32 cycles_to_len16;
+ union fw_ldst {
+ struct fw_ldst_addrval {
+ __be32 addr;
+ __be32 val;
+ } addrval;
+ struct fw_ldst_idctxt {
+ __be32 physid;
+ __be32 msg_pkd;
+ __be32 ctxt_data7;
+ __be32 ctxt_data6;
+ __be32 ctxt_data5;
+ __be32 ctxt_data4;
+ __be32 ctxt_data3;
+ __be32 ctxt_data2;
+ __be32 ctxt_data1;
+ __be32 ctxt_data0;
+ } idctxt;
+ struct fw_ldst_mdio {
+ __be16 paddr_mmd;
+ __be16 raddr;
+ __be16 vctl;
+ __be16 rval;
+ } mdio;
+ struct fw_ldst_mps {
+ __be16 fid_ctl;
+ __be16 rplcpf_pkd;
+ __be32 rplc127_96;
+ __be32 rplc95_64;
+ __be32 rplc63_32;
+ __be32 rplc31_0;
+ __be32 atrb;
+ __be16 vlan[16];
+ } mps;
+ struct fw_ldst_func {
+ u8 access_ctl;
+ u8 mod_index;
+ __be16 ctl_id;
+ __be32 offset;
+ __be64 data0;
+ __be64 data1;
+ } func;
+ } u;
+};
+
+#define FW_LDST_CMD_MSG(x) ((x) << 31)
+#define FW_LDST_CMD_PADDR(x) ((x) << 8)
+#define FW_LDST_CMD_MMD(x) ((x) << 0)
+#define FW_LDST_CMD_FID(x) ((x) << 15)
+#define FW_LDST_CMD_CTL(x) ((x) << 0)
+#define FW_LDST_CMD_RPLCPF(x) ((x) << 0)
+
+struct fw_reset_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ __be32 val;
+ __be32 r3;
+};
+
+struct fw_hello_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ __be32 err_to_mbasyncnot;
+#define FW_HELLO_CMD_ERR (1U << 31)
+#define FW_HELLO_CMD_INIT (1U << 30)
+#define FW_HELLO_CMD_MASTERDIS(x) ((x) << 29)
+#define FW_HELLO_CMD_MASTERFORCE(x) ((x) << 28)
+#define FW_HELLO_CMD_MBMASTER(x) ((x) << 24)
+#define FW_HELLO_CMD_MBASYNCNOT(x) ((x) << 20)
+ __be32 fwrev;
+};
+
+struct fw_bye_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ __be64 r3;
+};
+
+struct fw_initialize_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ __be64 r3;
+};
+
+enum fw_caps_config_hm {
+ FW_CAPS_CONFIG_HM_PCIE = 0x00000001,
+ FW_CAPS_CONFIG_HM_PL = 0x00000002,
+ FW_CAPS_CONFIG_HM_SGE = 0x00000004,
+ FW_CAPS_CONFIG_HM_CIM = 0x00000008,
+ FW_CAPS_CONFIG_HM_ULPTX = 0x00000010,
+ FW_CAPS_CONFIG_HM_TP = 0x00000020,
+ FW_CAPS_CONFIG_HM_ULPRX = 0x00000040,
+ FW_CAPS_CONFIG_HM_PMRX = 0x00000080,
+ FW_CAPS_CONFIG_HM_PMTX = 0x00000100,
+ FW_CAPS_CONFIG_HM_MC = 0x00000200,
+ FW_CAPS_CONFIG_HM_LE = 0x00000400,
+ FW_CAPS_CONFIG_HM_MPS = 0x00000800,
+ FW_CAPS_CONFIG_HM_XGMAC = 0x00001000,
+ FW_CAPS_CONFIG_HM_CPLSWITCH = 0x00002000,
+ FW_CAPS_CONFIG_HM_T4DBG = 0x00004000,
+ FW_CAPS_CONFIG_HM_MI = 0x00008000,
+ FW_CAPS_CONFIG_HM_I2CM = 0x00010000,
+ FW_CAPS_CONFIG_HM_NCSI = 0x00020000,
+ FW_CAPS_CONFIG_HM_SMB = 0x00040000,
+ FW_CAPS_CONFIG_HM_MA = 0x00080000,
+ FW_CAPS_CONFIG_HM_EDRAM = 0x00100000,
+ FW_CAPS_CONFIG_HM_PMU = 0x00200000,
+ FW_CAPS_CONFIG_HM_UART = 0x00400000,
+ FW_CAPS_CONFIG_HM_SF = 0x00800000,
+};
+
+enum fw_caps_config_nbm {
+ FW_CAPS_CONFIG_NBM_IPMI = 0x00000001,
+ FW_CAPS_CONFIG_NBM_NCSI = 0x00000002,
+};
+
+enum fw_caps_config_link {
+ FW_CAPS_CONFIG_LINK_PPP = 0x00000001,
+ FW_CAPS_CONFIG_LINK_QFC = 0x00000002,
+ FW_CAPS_CONFIG_LINK_DCBX = 0x00000004,
+};
+
+enum fw_caps_config_switch {
+ FW_CAPS_CONFIG_SWITCH_INGRESS = 0x00000001,
+ FW_CAPS_CONFIG_SWITCH_EGRESS = 0x00000002,
+};
+
+enum fw_caps_config_nic {
+ FW_CAPS_CONFIG_NIC = 0x00000001,
+ FW_CAPS_CONFIG_NIC_VM = 0x00000002,
+};
+
+enum fw_caps_config_ofld {
+ FW_CAPS_CONFIG_OFLD = 0x00000001,
+};
+
+enum fw_caps_config_rdma {
+ FW_CAPS_CONFIG_RDMA_RDDP = 0x00000001,
+ FW_CAPS_CONFIG_RDMA_RDMAC = 0x00000002,
+};
+
+enum fw_caps_config_iscsi {
+ FW_CAPS_CONFIG_ISCSI_INITIATOR_PDU = 0x00000001,
+ FW_CAPS_CONFIG_ISCSI_TARGET_PDU = 0x00000002,
+ FW_CAPS_CONFIG_ISCSI_INITIATOR_CNXOFLD = 0x00000004,
+ FW_CAPS_CONFIG_ISCSI_TARGET_CNXOFLD = 0x00000008,
+};
+
+enum fw_caps_config_fcoe {
+ FW_CAPS_CONFIG_FCOE_INITIATOR = 0x00000001,
+ FW_CAPS_CONFIG_FCOE_TARGET = 0x00000002,
+};
+
+struct fw_caps_config_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ __be32 r2;
+ __be32 hwmbitmap;
+ __be16 nbmcaps;
+ __be16 linkcaps;
+ __be16 switchcaps;
+ __be16 r3;
+ __be16 niccaps;
+ __be16 ofldcaps;
+ __be16 rdmacaps;
+ __be16 r4;
+ __be16 iscsicaps;
+ __be16 fcoecaps;
+ __be32 r5;
+ __be64 r6;
+};
+
+/*
+ * params command mnemonics
+ */
+enum fw_params_mnem {
+ FW_PARAMS_MNEM_DEV = 1, /* device params */
+ FW_PARAMS_MNEM_PFVF = 2, /* function params */
+ FW_PARAMS_MNEM_REG = 3, /* limited register access */
+ FW_PARAMS_MNEM_DMAQ = 4, /* dma queue params */
+ FW_PARAMS_MNEM_LAST
+};
+
+/*
+ * device parameters
+ */
+enum fw_params_param_dev {
+ FW_PARAMS_PARAM_DEV_CCLK = 0x00, /* chip core clock in khz */
+ FW_PARAMS_PARAM_DEV_PORTVEC = 0x01, /* the port vector */
+ FW_PARAMS_PARAM_DEV_NTID = 0x02, /* reads the number of TIDs
+ * allocated by the device's
+ * Lookup Engine
+ */
+ FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ = 0x03,
+ FW_PARAMS_PARAM_DEV_INTVER_NIC = 0x04,
+ FW_PARAMS_PARAM_DEV_INTVER_VNIC = 0x05,
+ FW_PARAMS_PARAM_DEV_INTVER_OFLD = 0x06,
+ FW_PARAMS_PARAM_DEV_INTVER_RI = 0x07,
+ FW_PARAMS_PARAM_DEV_INTVER_ISCSIPDU = 0x08,
+ FW_PARAMS_PARAM_DEV_INTVER_ISCSI = 0x09,
+ FW_PARAMS_PARAM_DEV_INTVER_FCOE = 0x0A
+};
+
+/*
+ * physical and virtual function parameters
+ */
+enum fw_params_param_pfvf {
+ FW_PARAMS_PARAM_PFVF_RWXCAPS = 0x00,
+ FW_PARAMS_PARAM_PFVF_ROUTE_START = 0x01,
+ FW_PARAMS_PARAM_PFVF_ROUTE_END = 0x02,
+ FW_PARAMS_PARAM_PFVF_CLIP_START = 0x03,
+ FW_PARAMS_PARAM_PFVF_CLIP_END = 0x04,
+ FW_PARAMS_PARAM_PFVF_FILTER_START = 0x05,
+ FW_PARAMS_PARAM_PFVF_FILTER_END = 0x06,
+ FW_PARAMS_PARAM_PFVF_SERVER_START = 0x07,
+ FW_PARAMS_PARAM_PFVF_SERVER_END = 0x08,
+ FW_PARAMS_PARAM_PFVF_TDDP_START = 0x09,
+ FW_PARAMS_PARAM_PFVF_TDDP_END = 0x0A,
+ FW_PARAMS_PARAM_PFVF_ISCSI_START = 0x0B,
+ FW_PARAMS_PARAM_PFVF_ISCSI_END = 0x0C,
+ FW_PARAMS_PARAM_PFVF_STAG_START = 0x0D,
+ FW_PARAMS_PARAM_PFVF_STAG_END = 0x0E,
+ FW_PARAMS_PARAM_PFVF_RQ_START = 0x1F,
+ FW_PARAMS_PARAM_PFVF_RQ_END = 0x10,
+ FW_PARAMS_PARAM_PFVF_PBL_START = 0x11,
+ FW_PARAMS_PARAM_PFVF_PBL_END = 0x12,
+ FW_PARAMS_PARAM_PFVF_L2T_START = 0x13,
+ FW_PARAMS_PARAM_PFVF_L2T_END = 0x14,
+ FW_PARAMS_PARAM_PFVF_SCHEDCLASS_ETH = 0x20,
+};
+
+/*
+ * dma queue parameters
+ */
+enum fw_params_param_dmaq {
+ FW_PARAMS_PARAM_DMAQ_IQ_DCAEN_DCACPU = 0x00,
+ FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH = 0x01,
+ FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_MNGT = 0x10,
+ FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_CTRL = 0x11,
+ FW_PARAMS_PARAM_DMAQ_EQ_SCHEDCLASS_ETH = 0x12,
+};
+
+#define FW_PARAMS_MNEM(x) ((x) << 24)
+#define FW_PARAMS_PARAM_X(x) ((x) << 16)
+#define FW_PARAMS_PARAM_Y(x) ((x) << 8)
+#define FW_PARAMS_PARAM_Z(x) ((x) << 0)
+#define FW_PARAMS_PARAM_XYZ(x) ((x) << 0)
+#define FW_PARAMS_PARAM_YZ(x) ((x) << 0)
+
+struct fw_params_cmd {
+ __be32 op_to_vfn;
+ __be32 retval_len16;
+ struct fw_params_param {
+ __be32 mnem;
+ __be32 val;
+ } param[7];
+};
+
+#define FW_PARAMS_CMD_PFN(x) ((x) << 8)
+#define FW_PARAMS_CMD_VFN(x) ((x) << 0)
+
+struct fw_pfvf_cmd {
+ __be32 op_to_vfn;
+ __be32 retval_len16;
+ __be32 niqflint_niq;
+ __be32 cmask_to_neq;
+ __be32 tc_to_nexactf;
+ __be32 r_caps_to_nethctrl;
+ __be16 nricq;
+ __be16 nriqp;
+ __be32 r4;
+};
+
+#define FW_PFVF_CMD_PFN(x) ((x) << 8)
+#define FW_PFVF_CMD_VFN(x) ((x) << 0)
+
+#define FW_PFVF_CMD_NIQFLINT(x) ((x) << 20)
+#define FW_PFVF_CMD_NIQFLINT_GET(x) (((x) >> 20) & 0xfff)
+
+#define FW_PFVF_CMD_NIQ(x) ((x) << 0)
+#define FW_PFVF_CMD_NIQ_GET(x) (((x) >> 0) & 0xfffff)
+
+#define FW_PFVF_CMD_CMASK(x) ((x) << 24)
+#define FW_PFVF_CMD_CMASK_GET(x) (((x) >> 24) & 0xf)
+
+#define FW_PFVF_CMD_PMASK(x) ((x) << 20)
+#define FW_PFVF_CMD_PMASK_GET(x) (((x) >> 20) & 0xf)
+
+#define FW_PFVF_CMD_NEQ(x) ((x) << 0)
+#define FW_PFVF_CMD_NEQ_GET(x) (((x) >> 0) & 0xfffff)
+
+#define FW_PFVF_CMD_TC(x) ((x) << 24)
+#define FW_PFVF_CMD_TC_GET(x) (((x) >> 24) & 0xff)
+
+#define FW_PFVF_CMD_NVI(x) ((x) << 16)
+#define FW_PFVF_CMD_NVI_GET(x) (((x) >> 16) & 0xff)
+
+#define FW_PFVF_CMD_NEXACTF(x) ((x) << 0)
+#define FW_PFVF_CMD_NEXACTF_GET(x) (((x) >> 0) & 0xffff)
+
+#define FW_PFVF_CMD_R_CAPS(x) ((x) << 24)
+#define FW_PFVF_CMD_R_CAPS_GET(x) (((x) >> 24) & 0xff)
+
+#define FW_PFVF_CMD_WX_CAPS(x) ((x) << 16)
+#define FW_PFVF_CMD_WX_CAPS_GET(x) (((x) >> 16) & 0xff)
+
+#define FW_PFVF_CMD_NETHCTRL(x) ((x) << 0)
+#define FW_PFVF_CMD_NETHCTRL_GET(x) (((x) >> 0) & 0xffff)
+
+enum fw_iq_type {
+ FW_IQ_TYPE_FL_INT_CAP,
+ FW_IQ_TYPE_NO_FL_INT_CAP
+};
+
+struct fw_iq_cmd {
+ __be32 op_to_vfn;
+ __be32 alloc_to_len16;
+ __be16 physiqid;
+ __be16 iqid;
+ __be16 fl0id;
+ __be16 fl1id;
+ __be32 type_to_iqandstindex;
+ __be16 iqdroprss_to_iqesize;
+ __be16 iqsize;
+ __be64 iqaddr;
+ __be32 iqns_to_fl0congen;
+ __be16 fl0dcaen_to_fl0cidxfthresh;
+ __be16 fl0size;
+ __be64 fl0addr;
+ __be32 fl1cngchmap_to_fl1congen;
+ __be16 fl1dcaen_to_fl1cidxfthresh;
+ __be16 fl1size;
+ __be64 fl1addr;
+};
+
+#define FW_IQ_CMD_PFN(x) ((x) << 8)
+#define FW_IQ_CMD_VFN(x) ((x) << 0)
+
+#define FW_IQ_CMD_ALLOC (1U << 31)
+#define FW_IQ_CMD_FREE (1U << 30)
+#define FW_IQ_CMD_MODIFY (1U << 29)
+#define FW_IQ_CMD_IQSTART(x) ((x) << 28)
+#define FW_IQ_CMD_IQSTOP(x) ((x) << 27)
+
+#define FW_IQ_CMD_TYPE(x) ((x) << 29)
+#define FW_IQ_CMD_IQASYNCH(x) ((x) << 28)
+#define FW_IQ_CMD_VIID(x) ((x) << 16)
+#define FW_IQ_CMD_IQANDST(x) ((x) << 15)
+#define FW_IQ_CMD_IQANUS(x) ((x) << 14)
+#define FW_IQ_CMD_IQANUD(x) ((x) << 12)
+#define FW_IQ_CMD_IQANDSTINDEX(x) ((x) << 0)
+
+#define FW_IQ_CMD_IQDROPRSS (1U << 15)
+#define FW_IQ_CMD_IQGTSMODE (1U << 14)
+#define FW_IQ_CMD_IQPCIECH(x) ((x) << 12)
+#define FW_IQ_CMD_IQDCAEN(x) ((x) << 11)
+#define FW_IQ_CMD_IQDCACPU(x) ((x) << 6)
+#define FW_IQ_CMD_IQINTCNTTHRESH(x) ((x) << 4)
+#define FW_IQ_CMD_IQO (1U << 3)
+#define FW_IQ_CMD_IQCPRIO(x) ((x) << 2)
+#define FW_IQ_CMD_IQESIZE(x) ((x) << 0)
+
+#define FW_IQ_CMD_IQNS(x) ((x) << 31)
+#define FW_IQ_CMD_IQRO(x) ((x) << 30)
+#define FW_IQ_CMD_IQFLINTIQHSEN(x) ((x) << 28)
+#define FW_IQ_CMD_IQFLINTCONGEN(x) ((x) << 27)
+#define FW_IQ_CMD_IQFLINTISCSIC(x) ((x) << 26)
+#define FW_IQ_CMD_FL0CNGCHMAP(x) ((x) << 20)
+#define FW_IQ_CMD_FL0CACHELOCK(x) ((x) << 15)
+#define FW_IQ_CMD_FL0DBP(x) ((x) << 14)
+#define FW_IQ_CMD_FL0DATANS(x) ((x) << 13)
+#define FW_IQ_CMD_FL0DATARO(x) ((x) << 12)
+#define FW_IQ_CMD_FL0CONGCIF(x) ((x) << 11)
+#define FW_IQ_CMD_FL0ONCHIP(x) ((x) << 10)
+#define FW_IQ_CMD_FL0STATUSPGNS(x) ((x) << 9)
+#define FW_IQ_CMD_FL0STATUSPGRO(x) ((x) << 8)
+#define FW_IQ_CMD_FL0FETCHNS(x) ((x) << 7)
+#define FW_IQ_CMD_FL0FETCHRO(x) ((x) << 6)
+#define FW_IQ_CMD_FL0HOSTFCMODE(x) ((x) << 4)
+#define FW_IQ_CMD_FL0CPRIO(x) ((x) << 3)
+#define FW_IQ_CMD_FL0PADEN (1U << 2)
+#define FW_IQ_CMD_FL0PACKEN (1U << 1)
+#define FW_IQ_CMD_FL0CONGEN (1U << 0)
+
+#define FW_IQ_CMD_FL0DCAEN(x) ((x) << 15)
+#define FW_IQ_CMD_FL0DCACPU(x) ((x) << 10)
+#define FW_IQ_CMD_FL0FBMIN(x) ((x) << 7)
+#define FW_IQ_CMD_FL0FBMAX(x) ((x) << 4)
+#define FW_IQ_CMD_FL0CIDXFTHRESHO (1U << 3)
+#define FW_IQ_CMD_FL0CIDXFTHRESH(x) ((x) << 0)
+
+#define FW_IQ_CMD_FL1CNGCHMAP(x) ((x) << 20)
+#define FW_IQ_CMD_FL1CACHELOCK(x) ((x) << 15)
+#define FW_IQ_CMD_FL1DBP(x) ((x) << 14)
+#define FW_IQ_CMD_FL1DATANS(x) ((x) << 13)
+#define FW_IQ_CMD_FL1DATARO(x) ((x) << 12)
+#define FW_IQ_CMD_FL1CONGCIF(x) ((x) << 11)
+#define FW_IQ_CMD_FL1ONCHIP(x) ((x) << 10)
+#define FW_IQ_CMD_FL1STATUSPGNS(x) ((x) << 9)
+#define FW_IQ_CMD_FL1STATUSPGRO(x) ((x) << 8)
+#define FW_IQ_CMD_FL1FETCHNS(x) ((x) << 7)
+#define FW_IQ_CMD_FL1FETCHRO(x) ((x) << 6)
+#define FW_IQ_CMD_FL1HOSTFCMODE(x) ((x) << 4)
+#define FW_IQ_CMD_FL1CPRIO(x) ((x) << 3)
+#define FW_IQ_CMD_FL1PADEN (1U << 2)
+#define FW_IQ_CMD_FL1PACKEN (1U << 1)
+#define FW_IQ_CMD_FL1CONGEN (1U << 0)
+
+#define FW_IQ_CMD_FL1DCAEN(x) ((x) << 15)
+#define FW_IQ_CMD_FL1DCACPU(x) ((x) << 10)
+#define FW_IQ_CMD_FL1FBMIN(x) ((x) << 7)
+#define FW_IQ_CMD_FL1FBMAX(x) ((x) << 4)
+#define FW_IQ_CMD_FL1CIDXFTHRESHO (1U << 3)
+#define FW_IQ_CMD_FL1CIDXFTHRESH(x) ((x) << 0)
+
+struct fw_eq_eth_cmd {
+ __be32 op_to_vfn;
+ __be32 alloc_to_len16;
+ __be32 eqid_pkd;
+ __be32 physeqid_pkd;
+ __be32 fetchszm_to_iqid;
+ __be32 dcaen_to_eqsize;
+ __be64 eqaddr;
+ __be32 viid_pkd;
+ __be32 r8_lo;
+ __be64 r9;
+};
+
+#define FW_EQ_ETH_CMD_PFN(x) ((x) << 8)
+#define FW_EQ_ETH_CMD_VFN(x) ((x) << 0)
+#define FW_EQ_ETH_CMD_ALLOC (1U << 31)
+#define FW_EQ_ETH_CMD_FREE (1U << 30)
+#define FW_EQ_ETH_CMD_MODIFY (1U << 29)
+#define FW_EQ_ETH_CMD_EQSTART (1U << 28)
+#define FW_EQ_ETH_CMD_EQSTOP (1U << 27)
+
+#define FW_EQ_ETH_CMD_EQID(x) ((x) << 0)
+#define FW_EQ_ETH_CMD_EQID_GET(x) (((x) >> 0) & 0xfffff)
+#define FW_EQ_ETH_CMD_PHYSEQID(x) ((x) << 0)
+
+#define FW_EQ_ETH_CMD_FETCHSZM(x) ((x) << 26)
+#define FW_EQ_ETH_CMD_STATUSPGNS(x) ((x) << 25)
+#define FW_EQ_ETH_CMD_STATUSPGRO(x) ((x) << 24)
+#define FW_EQ_ETH_CMD_FETCHNS(x) ((x) << 23)
+#define FW_EQ_ETH_CMD_FETCHRO(x) ((x) << 22)
+#define FW_EQ_ETH_CMD_HOSTFCMODE(x) ((x) << 20)
+#define FW_EQ_ETH_CMD_CPRIO(x) ((x) << 19)
+#define FW_EQ_ETH_CMD_ONCHIP(x) ((x) << 18)
+#define FW_EQ_ETH_CMD_PCIECHN(x) ((x) << 16)
+#define FW_EQ_ETH_CMD_IQID(x) ((x) << 0)
+
+#define FW_EQ_ETH_CMD_DCAEN(x) ((x) << 31)
+#define FW_EQ_ETH_CMD_DCACPU(x) ((x) << 26)
+#define FW_EQ_ETH_CMD_FBMIN(x) ((x) << 23)
+#define FW_EQ_ETH_CMD_FBMAX(x) ((x) << 20)
+#define FW_EQ_ETH_CMD_CIDXFTHRESHO(x) ((x) << 19)
+#define FW_EQ_ETH_CMD_CIDXFTHRESH(x) ((x) << 16)
+#define FW_EQ_ETH_CMD_EQSIZE(x) ((x) << 0)
+
+#define FW_EQ_ETH_CMD_VIID(x) ((x) << 16)
+
+struct fw_eq_ctrl_cmd {
+ __be32 op_to_vfn;
+ __be32 alloc_to_len16;
+ __be32 cmpliqid_eqid;
+ __be32 physeqid_pkd;
+ __be32 fetchszm_to_iqid;
+ __be32 dcaen_to_eqsize;
+ __be64 eqaddr;
+};
+
+#define FW_EQ_CTRL_CMD_PFN(x) ((x) << 8)
+#define FW_EQ_CTRL_CMD_VFN(x) ((x) << 0)
+
+#define FW_EQ_CTRL_CMD_ALLOC (1U << 31)
+#define FW_EQ_CTRL_CMD_FREE (1U << 30)
+#define FW_EQ_CTRL_CMD_MODIFY (1U << 29)
+#define FW_EQ_CTRL_CMD_EQSTART (1U << 28)
+#define FW_EQ_CTRL_CMD_EQSTOP (1U << 27)
+
+#define FW_EQ_CTRL_CMD_CMPLIQID(x) ((x) << 20)
+#define FW_EQ_CTRL_CMD_EQID(x) ((x) << 0)
+#define FW_EQ_CTRL_CMD_EQID_GET(x) (((x) >> 0) & 0xfffff)
+#define FW_EQ_CTRL_CMD_PHYSEQID_GET(x) (((x) >> 0) & 0xfffff)
+
+#define FW_EQ_CTRL_CMD_FETCHSZM (1U << 26)
+#define FW_EQ_CTRL_CMD_STATUSPGNS (1U << 25)
+#define FW_EQ_CTRL_CMD_STATUSPGRO (1U << 24)
+#define FW_EQ_CTRL_CMD_FETCHNS (1U << 23)
+#define FW_EQ_CTRL_CMD_FETCHRO (1U << 22)
+#define FW_EQ_CTRL_CMD_HOSTFCMODE(x) ((x) << 20)
+#define FW_EQ_CTRL_CMD_CPRIO(x) ((x) << 19)
+#define FW_EQ_CTRL_CMD_ONCHIP(x) ((x) << 18)
+#define FW_EQ_CTRL_CMD_PCIECHN(x) ((x) << 16)
+#define FW_EQ_CTRL_CMD_IQID(x) ((x) << 0)
+
+#define FW_EQ_CTRL_CMD_DCAEN(x) ((x) << 31)
+#define FW_EQ_CTRL_CMD_DCACPU(x) ((x) << 26)
+#define FW_EQ_CTRL_CMD_FBMIN(x) ((x) << 23)
+#define FW_EQ_CTRL_CMD_FBMAX(x) ((x) << 20)
+#define FW_EQ_CTRL_CMD_CIDXFTHRESHO(x) ((x) << 19)
+#define FW_EQ_CTRL_CMD_CIDXFTHRESH(x) ((x) << 16)
+#define FW_EQ_CTRL_CMD_EQSIZE(x) ((x) << 0)
+
+struct fw_eq_ofld_cmd {
+ __be32 op_to_vfn;
+ __be32 alloc_to_len16;
+ __be32 eqid_pkd;
+ __be32 physeqid_pkd;
+ __be32 fetchszm_to_iqid;
+ __be32 dcaen_to_eqsize;
+ __be64 eqaddr;
+};
+
+#define FW_EQ_OFLD_CMD_PFN(x) ((x) << 8)
+#define FW_EQ_OFLD_CMD_VFN(x) ((x) << 0)
+
+#define FW_EQ_OFLD_CMD_ALLOC (1U << 31)
+#define FW_EQ_OFLD_CMD_FREE (1U << 30)
+#define FW_EQ_OFLD_CMD_MODIFY (1U << 29)
+#define FW_EQ_OFLD_CMD_EQSTART (1U << 28)
+#define FW_EQ_OFLD_CMD_EQSTOP (1U << 27)
+
+#define FW_EQ_OFLD_CMD_EQID(x) ((x) << 0)
+#define FW_EQ_OFLD_CMD_EQID_GET(x) (((x) >> 0) & 0xfffff)
+#define FW_EQ_OFLD_CMD_PHYSEQID_GET(x) (((x) >> 0) & 0xfffff)
+
+#define FW_EQ_OFLD_CMD_FETCHSZM(x) ((x) << 26)
+#define FW_EQ_OFLD_CMD_STATUSPGNS(x) ((x) << 25)
+#define FW_EQ_OFLD_CMD_STATUSPGRO(x) ((x) << 24)
+#define FW_EQ_OFLD_CMD_FETCHNS(x) ((x) << 23)
+#define FW_EQ_OFLD_CMD_FETCHRO(x) ((x) << 22)
+#define FW_EQ_OFLD_CMD_HOSTFCMODE(x) ((x) << 20)
+#define FW_EQ_OFLD_CMD_CPRIO(x) ((x) << 19)
+#define FW_EQ_OFLD_CMD_ONCHIP(x) ((x) << 18)
+#define FW_EQ_OFLD_CMD_PCIECHN(x) ((x) << 16)
+#define FW_EQ_OFLD_CMD_IQID(x) ((x) << 0)
+
+#define FW_EQ_OFLD_CMD_DCAEN(x) ((x) << 31)
+#define FW_EQ_OFLD_CMD_DCACPU(x) ((x) << 26)
+#define FW_EQ_OFLD_CMD_FBMIN(x) ((x) << 23)
+#define FW_EQ_OFLD_CMD_FBMAX(x) ((x) << 20)
+#define FW_EQ_OFLD_CMD_CIDXFTHRESHO(x) ((x) << 19)
+#define FW_EQ_OFLD_CMD_CIDXFTHRESH(x) ((x) << 16)
+#define FW_EQ_OFLD_CMD_EQSIZE(x) ((x) << 0)
+
+/*
+ * Macros for VIID parsing:
+ * VIID - [10:8] PFN, [7] VI Valid, [6:0] VI number
+ */
+#define FW_VIID_PFN_GET(x) (((x) >> 8) & 0x7)
+#define FW_VIID_VIVLD_GET(x) (((x) >> 7) & 0x1)
+#define FW_VIID_VIN_GET(x) (((x) >> 0) & 0x7F)
+
+struct fw_vi_cmd {
+ __be32 op_to_vfn;
+ __be32 alloc_to_len16;
+ __be16 viid_pkd;
+ u8 mac[6];
+ u8 portid_pkd;
+ u8 nmac;
+ u8 nmac0[6];
+ __be16 rsssize_pkd;
+ u8 nmac1[6];
+ __be16 r7;
+ u8 nmac2[6];
+ __be16 r8;
+ u8 nmac3[6];
+ __be64 r9;
+ __be64 r10;
+};
+
+#define FW_VI_CMD_PFN(x) ((x) << 8)
+#define FW_VI_CMD_VFN(x) ((x) << 0)
+#define FW_VI_CMD_ALLOC (1U << 31)
+#define FW_VI_CMD_FREE (1U << 30)
+#define FW_VI_CMD_VIID(x) ((x) << 0)
+#define FW_VI_CMD_PORTID(x) ((x) << 4)
+#define FW_VI_CMD_RSSSIZE_GET(x) (((x) >> 0) & 0x7ff)
+
+/* Special VI_MAC command index ids */
+#define FW_VI_MAC_ADD_MAC 0x3FF
+#define FW_VI_MAC_ADD_PERSIST_MAC 0x3FE
+#define FW_VI_MAC_MAC_BASED_FREE 0x3FD
+
+enum fw_vi_mac_smac {
+ FW_VI_MAC_MPS_TCAM_ENTRY,
+ FW_VI_MAC_MPS_TCAM_ONLY,
+ FW_VI_MAC_SMT_ONLY,
+ FW_VI_MAC_SMT_AND_MPSTCAM
+};
+
+enum fw_vi_mac_result {
+ FW_VI_MAC_R_SUCCESS,
+ FW_VI_MAC_R_F_NONEXISTENT_NOMEM,
+ FW_VI_MAC_R_SMAC_FAIL,
+ FW_VI_MAC_R_F_ACL_CHECK
+};
+
+struct fw_vi_mac_cmd {
+ __be32 op_to_viid;
+ __be32 freemacs_to_len16;
+ union fw_vi_mac {
+ struct fw_vi_mac_exact {
+ __be16 valid_to_idx;
+ u8 macaddr[6];
+ } exact[7];
+ struct fw_vi_mac_hash {
+ __be64 hashvec;
+ } hash;
+ } u;
+};
+
+#define FW_VI_MAC_CMD_VIID(x) ((x) << 0)
+#define FW_VI_MAC_CMD_FREEMACS(x) ((x) << 31)
+#define FW_VI_MAC_CMD_HASHVECEN (1U << 23)
+#define FW_VI_MAC_CMD_HASHUNIEN(x) ((x) << 22)
+#define FW_VI_MAC_CMD_VALID (1U << 15)
+#define FW_VI_MAC_CMD_PRIO(x) ((x) << 12)
+#define FW_VI_MAC_CMD_SMAC_RESULT(x) ((x) << 10)
+#define FW_VI_MAC_CMD_SMAC_RESULT_GET(x) (((x) >> 10) & 0x3)
+#define FW_VI_MAC_CMD_IDX(x) ((x) << 0)
+#define FW_VI_MAC_CMD_IDX_GET(x) (((x) >> 0) & 0x3ff)
+
+#define FW_RXMODE_MTU_NO_CHG 65535
+
+struct fw_vi_rxmode_cmd {
+ __be32 op_to_viid;
+ __be32 retval_len16;
+ __be32 mtu_to_broadcasten;
+ __be32 r4_lo;
+};
+
+#define FW_VI_RXMODE_CMD_VIID(x) ((x) << 0)
+#define FW_VI_RXMODE_CMD_MTU(x) ((x) << 16)
+#define FW_VI_RXMODE_CMD_PROMISCEN_MASK 0x3
+#define FW_VI_RXMODE_CMD_PROMISCEN(x) ((x) << 14)
+#define FW_VI_RXMODE_CMD_ALLMULTIEN_MASK 0x3
+#define FW_VI_RXMODE_CMD_ALLMULTIEN(x) ((x) << 12)
+#define FW_VI_RXMODE_CMD_BROADCASTEN_MASK 0x3
+#define FW_VI_RXMODE_CMD_BROADCASTEN(x) ((x) << 10)
+
+struct fw_vi_enable_cmd {
+ __be32 op_to_viid;
+ __be32 ien_to_len16;
+ __be16 blinkdur;
+ __be16 r3;
+ __be32 r4;
+};
+
+#define FW_VI_ENABLE_CMD_VIID(x) ((x) << 0)
+#define FW_VI_ENABLE_CMD_IEN(x) ((x) << 31)
+#define FW_VI_ENABLE_CMD_EEN(x) ((x) << 30)
+#define FW_VI_ENABLE_CMD_LED (1U << 29)
+
+/* VI VF stats offset definitions */
+#define VI_VF_NUM_STATS 16
+enum fw_vi_stats_vf_index {
+ FW_VI_VF_STAT_TX_BCAST_BYTES_IX,
+ FW_VI_VF_STAT_TX_BCAST_FRAMES_IX,
+ FW_VI_VF_STAT_TX_MCAST_BYTES_IX,
+ FW_VI_VF_STAT_TX_MCAST_FRAMES_IX,
+ FW_VI_VF_STAT_TX_UCAST_BYTES_IX,
+ FW_VI_VF_STAT_TX_UCAST_FRAMES_IX,
+ FW_VI_VF_STAT_TX_DROP_FRAMES_IX,
+ FW_VI_VF_STAT_TX_OFLD_BYTES_IX,
+ FW_VI_VF_STAT_TX_OFLD_FRAMES_IX,
+ FW_VI_VF_STAT_RX_BCAST_BYTES_IX,
+ FW_VI_VF_STAT_RX_BCAST_FRAMES_IX,
+ FW_VI_VF_STAT_RX_MCAST_BYTES_IX,
+ FW_VI_VF_STAT_RX_MCAST_FRAMES_IX,
+ FW_VI_VF_STAT_RX_UCAST_BYTES_IX,
+ FW_VI_VF_STAT_RX_UCAST_FRAMES_IX,
+ FW_VI_VF_STAT_RX_ERR_FRAMES_IX
+};
+
+/* VI PF stats offset definitions */
+#define VI_PF_NUM_STATS 17
+enum fw_vi_stats_pf_index {
+ FW_VI_PF_STAT_TX_BCAST_BYTES_IX,
+ FW_VI_PF_STAT_TX_BCAST_FRAMES_IX,
+ FW_VI_PF_STAT_TX_MCAST_BYTES_IX,
+ FW_VI_PF_STAT_TX_MCAST_FRAMES_IX,
+ FW_VI_PF_STAT_TX_UCAST_BYTES_IX,
+ FW_VI_PF_STAT_TX_UCAST_FRAMES_IX,
+ FW_VI_PF_STAT_TX_OFLD_BYTES_IX,
+ FW_VI_PF_STAT_TX_OFLD_FRAMES_IX,
+ FW_VI_PF_STAT_RX_BYTES_IX,
+ FW_VI_PF_STAT_RX_FRAMES_IX,
+ FW_VI_PF_STAT_RX_BCAST_BYTES_IX,
+ FW_VI_PF_STAT_RX_BCAST_FRAMES_IX,
+ FW_VI_PF_STAT_RX_MCAST_BYTES_IX,
+ FW_VI_PF_STAT_RX_MCAST_FRAMES_IX,
+ FW_VI_PF_STAT_RX_UCAST_BYTES_IX,
+ FW_VI_PF_STAT_RX_UCAST_FRAMES_IX,
+ FW_VI_PF_STAT_RX_ERR_FRAMES_IX
+};
+
+struct fw_vi_stats_cmd {
+ __be32 op_to_viid;
+ __be32 retval_len16;
+ union fw_vi_stats {
+ struct fw_vi_stats_ctl {
+ __be16 nstats_ix;
+ __be16 r6;
+ __be32 r7;
+ __be64 stat0;
+ __be64 stat1;
+ __be64 stat2;
+ __be64 stat3;
+ __be64 stat4;
+ __be64 stat5;
+ } ctl;
+ struct fw_vi_stats_pf {
+ __be64 tx_bcast_bytes;
+ __be64 tx_bcast_frames;
+ __be64 tx_mcast_bytes;
+ __be64 tx_mcast_frames;
+ __be64 tx_ucast_bytes;
+ __be64 tx_ucast_frames;
+ __be64 tx_offload_bytes;
+ __be64 tx_offload_frames;
+ __be64 rx_pf_bytes;
+ __be64 rx_pf_frames;
+ __be64 rx_bcast_bytes;
+ __be64 rx_bcast_frames;
+ __be64 rx_mcast_bytes;
+ __be64 rx_mcast_frames;
+ __be64 rx_ucast_bytes;
+ __be64 rx_ucast_frames;
+ __be64 rx_err_frames;
+ } pf;
+ struct fw_vi_stats_vf {
+ __be64 tx_bcast_bytes;
+ __be64 tx_bcast_frames;
+ __be64 tx_mcast_bytes;
+ __be64 tx_mcast_frames;
+ __be64 tx_ucast_bytes;
+ __be64 tx_ucast_frames;
+ __be64 tx_drop_frames;
+ __be64 tx_offload_bytes;
+ __be64 tx_offload_frames;
+ __be64 rx_bcast_bytes;
+ __be64 rx_bcast_frames;
+ __be64 rx_mcast_bytes;
+ __be64 rx_mcast_frames;
+ __be64 rx_ucast_bytes;
+ __be64 rx_ucast_frames;
+ __be64 rx_err_frames;
+ } vf;
+ } u;
+};
+
+#define FW_VI_STATS_CMD_VIID(x) ((x) << 0)
+#define FW_VI_STATS_CMD_NSTATS(x) ((x) << 12)
+#define FW_VI_STATS_CMD_IX(x) ((x) << 0)
+
+struct fw_acl_mac_cmd {
+ __be32 op_to_vfn;
+ __be32 en_to_len16;
+ u8 nmac;
+ u8 r3[7];
+ __be16 r4;
+ u8 macaddr0[6];
+ __be16 r5;
+ u8 macaddr1[6];
+ __be16 r6;
+ u8 macaddr2[6];
+ __be16 r7;
+ u8 macaddr3[6];
+};
+
+#define FW_ACL_MAC_CMD_PFN(x) ((x) << 8)
+#define FW_ACL_MAC_CMD_VFN(x) ((x) << 0)
+#define FW_ACL_MAC_CMD_EN(x) ((x) << 31)
+
+struct fw_acl_vlan_cmd {
+ __be32 op_to_vfn;
+ __be32 en_to_len16;
+ u8 nvlan;
+ u8 dropnovlan_fm;
+ u8 r3_lo[6];
+ __be16 vlanid[16];
+};
+
+#define FW_ACL_VLAN_CMD_PFN(x) ((x) << 8)
+#define FW_ACL_VLAN_CMD_VFN(x) ((x) << 0)
+#define FW_ACL_VLAN_CMD_EN(x) ((x) << 31)
+#define FW_ACL_VLAN_CMD_DROPNOVLAN(x) ((x) << 7)
+#define FW_ACL_VLAN_CMD_FM(x) ((x) << 6)
+
+enum fw_port_cap {
+ FW_PORT_CAP_SPEED_100M = 0x0001,
+ FW_PORT_CAP_SPEED_1G = 0x0002,
+ FW_PORT_CAP_SPEED_2_5G = 0x0004,
+ FW_PORT_CAP_SPEED_10G = 0x0008,
+ FW_PORT_CAP_SPEED_40G = 0x0010,
+ FW_PORT_CAP_SPEED_100G = 0x0020,
+ FW_PORT_CAP_FC_RX = 0x0040,
+ FW_PORT_CAP_FC_TX = 0x0080,
+ FW_PORT_CAP_ANEG = 0x0100,
+ FW_PORT_CAP_MDI_0 = 0x0200,
+ FW_PORT_CAP_MDI_1 = 0x0400,
+ FW_PORT_CAP_BEAN = 0x0800,
+ FW_PORT_CAP_PMA_LPBK = 0x1000,
+ FW_PORT_CAP_PCS_LPBK = 0x2000,
+ FW_PORT_CAP_PHYXS_LPBK = 0x4000,
+ FW_PORT_CAP_FAR_END_LPBK = 0x8000,
+};
+
+enum fw_port_mdi {
+ FW_PORT_MDI_UNCHANGED,
+ FW_PORT_MDI_AUTO,
+ FW_PORT_MDI_F_STRAIGHT,
+ FW_PORT_MDI_F_CROSSOVER
+};
+
+#define FW_PORT_MDI(x) ((x) << 9)
+
+enum fw_port_action {
+ FW_PORT_ACTION_L1_CFG = 0x0001,
+ FW_PORT_ACTION_L2_CFG = 0x0002,
+ FW_PORT_ACTION_GET_PORT_INFO = 0x0003,
+ FW_PORT_ACTION_L2_PPP_CFG = 0x0004,
+ FW_PORT_ACTION_L2_DCB_CFG = 0x0005,
+ FW_PORT_ACTION_LOW_PWR_TO_NORMAL = 0x0010,
+ FW_PORT_ACTION_L1_LOW_PWR_EN = 0x0011,
+ FW_PORT_ACTION_L2_WOL_MODE_EN = 0x0012,
+ FW_PORT_ACTION_LPBK_TO_NORMAL = 0x0020,
+ FW_PORT_ACTION_L1_LPBK = 0x0021,
+ FW_PORT_ACTION_L1_PMA_LPBK = 0x0022,
+ FW_PORT_ACTION_L1_PCS_LPBK = 0x0023,
+ FW_PORT_ACTION_L1_PHYXS_CSIDE_LPBK = 0x0024,
+ FW_PORT_ACTION_L1_PHYXS_ESIDE_LPBK = 0x0025,
+ FW_PORT_ACTION_PHY_RESET = 0x0040,
+ FW_PORT_ACTION_PMA_RESET = 0x0041,
+ FW_PORT_ACTION_PCS_RESET = 0x0042,
+ FW_PORT_ACTION_PHYXS_RESET = 0x0043,
+ FW_PORT_ACTION_DTEXS_REEST = 0x0044,
+ FW_PORT_ACTION_AN_RESET = 0x0045
+};
+
+enum fw_port_l2cfg_ctlbf {
+ FW_PORT_L2_CTLBF_OVLAN0 = 0x01,
+ FW_PORT_L2_CTLBF_OVLAN1 = 0x02,
+ FW_PORT_L2_CTLBF_OVLAN2 = 0x04,
+ FW_PORT_L2_CTLBF_OVLAN3 = 0x08,
+ FW_PORT_L2_CTLBF_IVLAN = 0x10,
+ FW_PORT_L2_CTLBF_TXIPG = 0x20
+};
+
+enum fw_port_dcb_cfg {
+ FW_PORT_DCB_CFG_PG = 0x01,
+ FW_PORT_DCB_CFG_PFC = 0x02,
+ FW_PORT_DCB_CFG_APPL = 0x04
+};
+
+enum fw_port_dcb_cfg_rc {
+ FW_PORT_DCB_CFG_SUCCESS = 0x0,
+ FW_PORT_DCB_CFG_ERROR = 0x1
+};
+
+struct fw_port_cmd {
+ __be32 op_to_portid;
+ __be32 action_to_len16;
+ union fw_port {
+ struct fw_port_l1cfg {
+ __be32 rcap;
+ __be32 r;
+ } l1cfg;
+ struct fw_port_l2cfg {
+ __be16 ctlbf_to_ivlan0;
+ __be16 ivlantype;
+ __be32 txipg_pkd;
+ __be16 ovlan0mask;
+ __be16 ovlan0type;
+ __be16 ovlan1mask;
+ __be16 ovlan1type;
+ __be16 ovlan2mask;
+ __be16 ovlan2type;
+ __be16 ovlan3mask;
+ __be16 ovlan3type;
+ } l2cfg;
+ struct fw_port_info {
+ __be32 lstatus_to_modtype;
+ __be16 pcap;
+ __be16 acap;
+ } info;
+ struct fw_port_ppp {
+ __be32 pppen_to_ncsich;
+ __be32 r11;
+ } ppp;
+ struct fw_port_dcb {
+ __be16 cfg;
+ u8 up_map;
+ u8 sf_cfgrc;
+ __be16 prot_ix;
+ u8 pe7_to_pe0;
+ u8 numTCPFCs;
+ __be32 pgid0_to_pgid7;
+ __be32 numTCs_oui;
+ u8 pgpc[8];
+ } dcb;
+ } u;
+};
+
+#define FW_PORT_CMD_READ (1U << 22)
+
+#define FW_PORT_CMD_PORTID(x) ((x) << 0)
+#define FW_PORT_CMD_PORTID_GET(x) (((x) >> 0) & 0xf)
+
+#define FW_PORT_CMD_ACTION(x) ((x) << 16)
+
+#define FW_PORT_CMD_CTLBF(x) ((x) << 10)
+#define FW_PORT_CMD_OVLAN3(x) ((x) << 7)
+#define FW_PORT_CMD_OVLAN2(x) ((x) << 6)
+#define FW_PORT_CMD_OVLAN1(x) ((x) << 5)
+#define FW_PORT_CMD_OVLAN0(x) ((x) << 4)
+#define FW_PORT_CMD_IVLAN0(x) ((x) << 3)
+
+#define FW_PORT_CMD_TXIPG(x) ((x) << 19)
+
+#define FW_PORT_CMD_LSTATUS (1U << 31)
+#define FW_PORT_CMD_LSPEED(x) ((x) << 24)
+#define FW_PORT_CMD_LSPEED_GET(x) (((x) >> 24) & 0x3f)
+#define FW_PORT_CMD_TXPAUSE (1U << 23)
+#define FW_PORT_CMD_RXPAUSE (1U << 22)
+#define FW_PORT_CMD_MDIOCAP (1U << 21)
+#define FW_PORT_CMD_MDIOADDR_GET(x) (((x) >> 16) & 0x1f)
+#define FW_PORT_CMD_LPTXPAUSE (1U << 15)
+#define FW_PORT_CMD_LPRXPAUSE (1U << 14)
+#define FW_PORT_CMD_PTYPE_MASK 0x1f
+#define FW_PORT_CMD_PTYPE_GET(x) (((x) >> 8) & FW_PORT_CMD_PTYPE_MASK)
+#define FW_PORT_CMD_MODTYPE_MASK 0x1f
+#define FW_PORT_CMD_MODTYPE_GET(x) (((x) >> 0) & FW_PORT_CMD_MODTYPE_MASK)
+
+#define FW_PORT_CMD_PPPEN(x) ((x) << 31)
+#define FW_PORT_CMD_TPSRC(x) ((x) << 28)
+#define FW_PORT_CMD_NCSISRC(x) ((x) << 24)
+
+#define FW_PORT_CMD_CH0(x) ((x) << 20)
+#define FW_PORT_CMD_CH1(x) ((x) << 16)
+#define FW_PORT_CMD_CH2(x) ((x) << 12)
+#define FW_PORT_CMD_CH3(x) ((x) << 8)
+#define FW_PORT_CMD_NCSICH(x) ((x) << 4)
+
+enum fw_port_type {
+ FW_PORT_TYPE_FIBER,
+ FW_PORT_TYPE_KX4,
+ FW_PORT_TYPE_BT_SGMII,
+ FW_PORT_TYPE_KX,
+ FW_PORT_TYPE_BT_XAUI,
+ FW_PORT_TYPE_KR,
+ FW_PORT_TYPE_CX4,
+ FW_PORT_TYPE_TWINAX,
+
+ FW_PORT_TYPE_NONE = FW_PORT_CMD_PTYPE_MASK
+};
+
+enum fw_port_module_type {
+ FW_PORT_MOD_TYPE_NA,
+ FW_PORT_MOD_TYPE_LR,
+ FW_PORT_MOD_TYPE_SR,
+ FW_PORT_MOD_TYPE_ER,
+
+ FW_PORT_MOD_TYPE_NONE = FW_PORT_CMD_MODTYPE_MASK
+};
+
+/* port stats */
+#define FW_NUM_PORT_STATS 50
+#define FW_NUM_PORT_TX_STATS 23
+#define FW_NUM_PORT_RX_STATS 27
+
+enum fw_port_stats_tx_index {
+ FW_STAT_TX_PORT_BYTES_IX,
+ FW_STAT_TX_PORT_FRAMES_IX,
+ FW_STAT_TX_PORT_BCAST_IX,
+ FW_STAT_TX_PORT_MCAST_IX,
+ FW_STAT_TX_PORT_UCAST_IX,
+ FW_STAT_TX_PORT_ERROR_IX,
+ FW_STAT_TX_PORT_64B_IX,
+ FW_STAT_TX_PORT_65B_127B_IX,
+ FW_STAT_TX_PORT_128B_255B_IX,
+ FW_STAT_TX_PORT_256B_511B_IX,
+ FW_STAT_TX_PORT_512B_1023B_IX,
+ FW_STAT_TX_PORT_1024B_1518B_IX,
+ FW_STAT_TX_PORT_1519B_MAX_IX,
+ FW_STAT_TX_PORT_DROP_IX,
+ FW_STAT_TX_PORT_PAUSE_IX,
+ FW_STAT_TX_PORT_PPP0_IX,
+ FW_STAT_TX_PORT_PPP1_IX,
+ FW_STAT_TX_PORT_PPP2_IX,
+ FW_STAT_TX_PORT_PPP3_IX,
+ FW_STAT_TX_PORT_PPP4_IX,
+ FW_STAT_TX_PORT_PPP5_IX,
+ FW_STAT_TX_PORT_PPP6_IX,
+ FW_STAT_TX_PORT_PPP7_IX
+};
+
+enum fw_port_stat_rx_index {
+ FW_STAT_RX_PORT_BYTES_IX,
+ FW_STAT_RX_PORT_FRAMES_IX,
+ FW_STAT_RX_PORT_BCAST_IX,
+ FW_STAT_RX_PORT_MCAST_IX,
+ FW_STAT_RX_PORT_UCAST_IX,
+ FW_STAT_RX_PORT_MTU_ERROR_IX,
+ FW_STAT_RX_PORT_MTU_CRC_ERROR_IX,
+ FW_STAT_RX_PORT_CRC_ERROR_IX,
+ FW_STAT_RX_PORT_LEN_ERROR_IX,
+ FW_STAT_RX_PORT_SYM_ERROR_IX,
+ FW_STAT_RX_PORT_64B_IX,
+ FW_STAT_RX_PORT_65B_127B_IX,
+ FW_STAT_RX_PORT_128B_255B_IX,
+ FW_STAT_RX_PORT_256B_511B_IX,
+ FW_STAT_RX_PORT_512B_1023B_IX,
+ FW_STAT_RX_PORT_1024B_1518B_IX,
+ FW_STAT_RX_PORT_1519B_MAX_IX,
+ FW_STAT_RX_PORT_PAUSE_IX,
+ FW_STAT_RX_PORT_PPP0_IX,
+ FW_STAT_RX_PORT_PPP1_IX,
+ FW_STAT_RX_PORT_PPP2_IX,
+ FW_STAT_RX_PORT_PPP3_IX,
+ FW_STAT_RX_PORT_PPP4_IX,
+ FW_STAT_RX_PORT_PPP5_IX,
+ FW_STAT_RX_PORT_PPP6_IX,
+ FW_STAT_RX_PORT_PPP7_IX,
+ FW_STAT_RX_PORT_LESS_64B_IX
+};
+
+struct fw_port_stats_cmd {
+ __be32 op_to_portid;
+ __be32 retval_len16;
+ union fw_port_stats {
+ struct fw_port_stats_ctl {
+ u8 nstats_bg_bm;
+ u8 tx_ix;
+ __be16 r6;
+ __be32 r7;
+ __be64 stat0;
+ __be64 stat1;
+ __be64 stat2;
+ __be64 stat3;
+ __be64 stat4;
+ __be64 stat5;
+ } ctl;
+ struct fw_port_stats_all {
+ __be64 tx_bytes;
+ __be64 tx_frames;
+ __be64 tx_bcast;
+ __be64 tx_mcast;
+ __be64 tx_ucast;
+ __be64 tx_error;
+ __be64 tx_64b;
+ __be64 tx_65b_127b;
+ __be64 tx_128b_255b;
+ __be64 tx_256b_511b;
+ __be64 tx_512b_1023b;
+ __be64 tx_1024b_1518b;
+ __be64 tx_1519b_max;
+ __be64 tx_drop;
+ __be64 tx_pause;
+ __be64 tx_ppp0;
+ __be64 tx_ppp1;
+ __be64 tx_ppp2;
+ __be64 tx_ppp3;
+ __be64 tx_ppp4;
+ __be64 tx_ppp5;
+ __be64 tx_ppp6;
+ __be64 tx_ppp7;
+ __be64 rx_bytes;
+ __be64 rx_frames;
+ __be64 rx_bcast;
+ __be64 rx_mcast;
+ __be64 rx_ucast;
+ __be64 rx_mtu_error;
+ __be64 rx_mtu_crc_error;
+ __be64 rx_crc_error;
+ __be64 rx_len_error;
+ __be64 rx_sym_error;
+ __be64 rx_64b;
+ __be64 rx_65b_127b;
+ __be64 rx_128b_255b;
+ __be64 rx_256b_511b;
+ __be64 rx_512b_1023b;
+ __be64 rx_1024b_1518b;
+ __be64 rx_1519b_max;
+ __be64 rx_pause;
+ __be64 rx_ppp0;
+ __be64 rx_ppp1;
+ __be64 rx_ppp2;
+ __be64 rx_ppp3;
+ __be64 rx_ppp4;
+ __be64 rx_ppp5;
+ __be64 rx_ppp6;
+ __be64 rx_ppp7;
+ __be64 rx_less_64b;
+ __be64 rx_bg_drop;
+ __be64 rx_bg_trunc;
+ } all;
+ } u;
+};
+
+#define FW_PORT_STATS_CMD_NSTATS(x) ((x) << 4)
+#define FW_PORT_STATS_CMD_BG_BM(x) ((x) << 0)
+#define FW_PORT_STATS_CMD_TX(x) ((x) << 7)
+#define FW_PORT_STATS_CMD_IX(x) ((x) << 0)
+
+/* port loopback stats */
+#define FW_NUM_LB_STATS 16
+enum fw_port_lb_stats_index {
+ FW_STAT_LB_PORT_BYTES_IX,
+ FW_STAT_LB_PORT_FRAMES_IX,
+ FW_STAT_LB_PORT_BCAST_IX,
+ FW_STAT_LB_PORT_MCAST_IX,
+ FW_STAT_LB_PORT_UCAST_IX,
+ FW_STAT_LB_PORT_ERROR_IX,
+ FW_STAT_LB_PORT_64B_IX,
+ FW_STAT_LB_PORT_65B_127B_IX,
+ FW_STAT_LB_PORT_128B_255B_IX,
+ FW_STAT_LB_PORT_256B_511B_IX,
+ FW_STAT_LB_PORT_512B_1023B_IX,
+ FW_STAT_LB_PORT_1024B_1518B_IX,
+ FW_STAT_LB_PORT_1519B_MAX_IX,
+ FW_STAT_LB_PORT_DROP_FRAMES_IX
+};
+
+struct fw_port_lb_stats_cmd {
+ __be32 op_to_lbport;
+ __be32 retval_len16;
+ union fw_port_lb_stats {
+ struct fw_port_lb_stats_ctl {
+ u8 nstats_bg_bm;
+ u8 ix_pkd;
+ __be16 r6;
+ __be32 r7;
+ __be64 stat0;
+ __be64 stat1;
+ __be64 stat2;
+ __be64 stat3;
+ __be64 stat4;
+ __be64 stat5;
+ } ctl;
+ struct fw_port_lb_stats_all {
+ __be64 tx_bytes;
+ __be64 tx_frames;
+ __be64 tx_bcast;
+ __be64 tx_mcast;
+ __be64 tx_ucast;
+ __be64 tx_error;
+ __be64 tx_64b;
+ __be64 tx_65b_127b;
+ __be64 tx_128b_255b;
+ __be64 tx_256b_511b;
+ __be64 tx_512b_1023b;
+ __be64 tx_1024b_1518b;
+ __be64 tx_1519b_max;
+ __be64 rx_lb_drop;
+ __be64 rx_lb_trunc;
+ } all;
+ } u;
+};
+
+#define FW_PORT_LB_STATS_CMD_LBPORT(x) ((x) << 0)
+#define FW_PORT_LB_STATS_CMD_NSTATS(x) ((x) << 4)
+#define FW_PORT_LB_STATS_CMD_BG_BM(x) ((x) << 0)
+#define FW_PORT_LB_STATS_CMD_IX(x) ((x) << 0)
+
+struct fw_rss_ind_tbl_cmd {
+ __be32 op_to_viid;
+#define FW_RSS_IND_TBL_CMD_VIID(x) ((x) << 0)
+ __be32 retval_len16;
+ __be16 niqid;
+ __be16 startidx;
+ __be32 r3;
+ __be32 iq0_to_iq2;
+#define FW_RSS_IND_TBL_CMD_IQ0(x) ((x) << 20)
+#define FW_RSS_IND_TBL_CMD_IQ1(x) ((x) << 10)
+#define FW_RSS_IND_TBL_CMD_IQ2(x) ((x) << 0)
+ __be32 iq3_to_iq5;
+ __be32 iq6_to_iq8;
+ __be32 iq9_to_iq11;
+ __be32 iq12_to_iq14;
+ __be32 iq15_to_iq17;
+ __be32 iq18_to_iq20;
+ __be32 iq21_to_iq23;
+ __be32 iq24_to_iq26;
+ __be32 iq27_to_iq29;
+ __be32 iq30_iq31;
+ __be32 r15_lo;
+};
+
+struct fw_rss_glb_config_cmd {
+ __be32 op_to_write;
+ __be32 retval_len16;
+ union fw_rss_glb_config {
+ struct fw_rss_glb_config_manual {
+ __be32 mode_pkd;
+ __be32 r3;
+ __be64 r4;
+ __be64 r5;
+ } manual;
+ struct fw_rss_glb_config_basicvirtual {
+ __be32 mode_pkd;
+ __be32 synmapen_to_hashtoeplitz;
+#define FW_RSS_GLB_CONFIG_CMD_SYNMAPEN (1U << 8)
+#define FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV6 (1U << 7)
+#define FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV6 (1U << 6)
+#define FW_RSS_GLB_CONFIG_CMD_SYN4TUPENIPV4 (1U << 5)
+#define FW_RSS_GLB_CONFIG_CMD_SYN2TUPENIPV4 (1U << 4)
+#define FW_RSS_GLB_CONFIG_CMD_OFDMAPEN (1U << 3)
+#define FW_RSS_GLB_CONFIG_CMD_TNLMAPEN (1U << 2)
+#define FW_RSS_GLB_CONFIG_CMD_TNLALLLKP (1U << 1)
+#define FW_RSS_GLB_CONFIG_CMD_HASHTOEPLITZ (1U << 0)
+ __be64 r8;
+ __be64 r9;
+ } basicvirtual;
+ } u;
+};
+
+#define FW_RSS_GLB_CONFIG_CMD_MODE(x) ((x) << 28)
+
+#define FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL 0
+#define FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL 1
+
+struct fw_rss_vi_config_cmd {
+ __be32 op_to_viid;
+#define FW_RSS_VI_CONFIG_CMD_VIID(x) ((x) << 0)
+ __be32 retval_len16;
+ union fw_rss_vi_config {
+ struct fw_rss_vi_config_manual {
+ __be64 r3;
+ __be64 r4;
+ __be64 r5;
+ } manual;
+ struct fw_rss_vi_config_basicvirtual {
+ __be32 r6;
+ __be32 defaultq_to_ip4udpen;
+#define FW_RSS_VI_CONFIG_CMD_DEFAULTQ(x) ((x) << 16)
+#define FW_RSS_VI_CONFIG_CMD_IP6FOURTUPEN (1U << 4)
+#define FW_RSS_VI_CONFIG_CMD_IP6TWOTUPEN (1U << 3)
+#define FW_RSS_VI_CONFIG_CMD_IP4FOURTUPEN (1U << 2)
+#define FW_RSS_VI_CONFIG_CMD_IP4TWOTUPEN (1U << 1)
+#define FW_RSS_VI_CONFIG_CMD_IP4UDPEN (1U << 0)
+ __be64 r9;
+ __be64 r10;
+ } basicvirtual;
+ } u;
+};
+
+enum fw_error_type {
+ FW_ERROR_TYPE_EXCEPTION = 0x0,
+ FW_ERROR_TYPE_HWMODULE = 0x1,
+ FW_ERROR_TYPE_WR = 0x2,
+ FW_ERROR_TYPE_ACL = 0x3,
+};
+
+struct fw_error_cmd {
+ __be32 op_to_type;
+ __be32 len16_pkd;
+ union fw_error {
+ struct fw_error_exception {
+ __be32 info[6];
+ } exception;
+ struct fw_error_hwmodule {
+ __be32 regaddr;
+ __be32 regval;
+ } hwmodule;
+ struct fw_error_wr {
+ __be16 cidx;
+ __be16 pfn_vfn;
+ __be32 eqid;
+ u8 wrhdr[16];
+ } wr;
+ struct fw_error_acl {
+ __be16 cidx;
+ __be16 pfn_vfn;
+ __be32 eqid;
+ __be16 mv_pkd;
+ u8 val[6];
+ __be64 r4;
+ } acl;
+ } u;
+};
+
+struct fw_debug_cmd {
+ __be32 op_type;
+#define FW_DEBUG_CMD_TYPE_GET(x) ((x) & 0xff)
+ __be32 len16_pkd;
+ union fw_debug {
+ struct fw_debug_assert {
+ __be32 fcid;
+ __be32 line;
+ __be32 x;
+ __be32 y;
+ u8 filename_0_7[8];
+ u8 filename_8_15[8];
+ __be64 r3;
+ } assert;
+ struct fw_debug_prt {
+ __be16 dprtstridx;
+ __be16 r3[3];
+ __be32 dprtstrparam0;
+ __be32 dprtstrparam1;
+ __be32 dprtstrparam2;
+ __be32 dprtstrparam3;
+ } prt;
+ } u;
+};
+
+struct fw_hdr {
+ u8 ver;
+ u8 reserved1;
+ __be16 len512; /* bin length in units of 512-bytes */
+ __be32 fw_ver; /* firmware version */
+ __be32 tp_microcode_ver;
+ u8 intfver_nic;
+ u8 intfver_vnic;
+ u8 intfver_ofld;
+ u8 intfver_ri;
+ u8 intfver_iscsipdu;
+ u8 intfver_iscsi;
+ u8 intfver_fcoe;
+ u8 reserved2;
+ __be32 reserved3[27];
+};
+
+#define FW_HDR_FW_VER_MAJOR_GET(x) (((x) >> 24) & 0xff)
+#define FW_HDR_FW_VER_MINOR_GET(x) (((x) >> 16) & 0xff)
+#define FW_HDR_FW_VER_MICRO_GET(x) (((x) >> 8) & 0xff)
+#define FW_HDR_FW_VER_BUILD_GET(x) (((x) >> 0) & 0xff)
+#endif /* _T4FW_INTERFACE_H_ */
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <asm/irq.h>
#include <linux/ethtool.h>
#include <linux/string.h>
#include <linux/firmware.h>
+#include <linux/rtnetlink.h>
#include <asm/unaligned.h>
DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n",
ioread8(&nic->csr->scb.status));
- e100_down(netdev_priv(netdev));
- e100_up(netdev_priv(netdev));
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+ }
+ rtnl_unlock();
}
static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
/* TX */
struct e1000_tx_ring *tx_ring; /* One per active queue */
unsigned int restart_queue;
- unsigned long tx_queue_len;
u32 txd_cmd;
u32 tx_int_delay;
u32 tx_abs_int_delay;
adapter->alloc_rx_buf(adapter, ring,
E1000_DESC_UNUSED(ring));
}
-
- adapter->tx_queue_len = netdev->tx_queue_len;
}
int e1000_up(struct e1000_adapter *adapter)
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
- netdev->tx_queue_len = adapter->tx_queue_len;
adapter->link_speed = 0;
adapter->link_duplex = 0;
netif_carrier_off(netdev);
E1000_CTRL_RFCE) ? "RX" : ((ctrl &
E1000_CTRL_TFCE) ? "TX" : "None" )));
- /* tweak tx_queue_len according to speed/duplex
- * and adjust the timeout factor */
- netdev->tx_queue_len = adapter->tx_queue_len;
+ /* adjust timeout factor according to speed/duplex */
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
case SPEED_10:
txb2b = false;
- netdev->tx_queue_len = 10;
adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
txb2b = false;
- netdev->tx_queue_len = 100;
/* maybe add some timeout factor ? */
break;
}
struct e1000_hw *hw = &adapter->hw;
static int global_quad_port_a; /* global port a indication */
struct pci_dev *pdev = adapter->pdev;
- u16 eeprom_data = 0;
int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
s32 rc;
if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
adapter->flags &= ~FLAG_HAS_WOL;
break;
-
case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ /* Disable ASPM L0s due to hardware errata */
+ e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L0S);
+
if (pdev->device == E1000_DEV_ID_82573L) {
- if (e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1,
- &eeprom_data) < 0)
- break;
- if (!(eeprom_data & NVM_WORD1A_ASPM_MASK)) {
- adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = DEFAULT_JUMBO;
- }
+ adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = DEFAULT_JUMBO;
}
break;
default:
| FLAG_RESET_OVERWRITES_LAA /* errata */
| FLAG_TARC_SPEED_MODE_BIT /* errata */
| FLAG_APME_CHECK_PORT_B,
+ .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_TARC_SPEED_MODE_BIT, /* errata */
+ .flags2 = FLAG2_DISABLE_ASPM_L1, /* errata 13 */
.pba = 38,
.max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
struct e1000_info e1000_82573_info = {
.mac = e1000_82573,
.flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
- | FLAG_HAS_ERT
| FLAG_HAS_SWSM_ON_LOAD,
.pba = 20,
.max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
+#include <linux/pci-aspm.h>
#include "hw.h"
struct napi_struct napi;
- unsigned long tx_queue_len;
unsigned int restart_queue;
u32 txd_cmd;
struct e1000_info {
enum e1000_mac_type mac;
unsigned int flags;
- unsigned int flags2;
+ unsigned int flags2;
u32 pba;
u32 max_hw_frame_size;
s32 (*get_variants)(struct e1000_adapter *);
#define FLAG2_CRC_STRIPPING (1 << 0)
#define FLAG2_HAS_PHY_WAKEUP (1 << 1)
#define FLAG2_IS_DISCARDING (1 << 2)
+#define FLAG2_DISABLE_ASPM_L1 (1 << 3)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
extern bool e1000e_has_link(struct e1000_adapter *adapter);
extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
+extern void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
extern unsigned int copybreak;
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "e1000.h"
#include <linux/netdevice.h>
#include <linux/tcp.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/mii.h>
i = 0;
}
+ if (i == tx_ring->next_to_use)
+ break;
eop = tx_ring->buffer_info[i].next_to_watch;
eop_desc = E1000_TX_DESC(*tx_ring, eop);
}
ew32(TCTL, tctl);
e1000e_config_collision_dist(hw);
-
- adapter->tx_queue_len = adapter->netdev->tx_queue_len;
}
/**
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
- netdev->tx_queue_len = adapter->tx_queue_len;
netif_carrier_off(netdev);
adapter->link_speed = 0;
adapter->link_duplex = 0;
"link gets many collisions.\n");
}
- /*
- * tweak tx_queue_len according to speed/duplex
- * and adjust the timeout factor
- */
- netdev->tx_queue_len = adapter->tx_queue_len;
+ /* adjust timeout factor according to speed/duplex */
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
case SPEED_10:
txb2b = 0;
- netdev->tx_queue_len = 10;
adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
txb2b = 0;
- netdev->tx_queue_len = 100;
adapter->tx_timeout_factor = 10;
break;
}
return -EINVAL;
}
+ /* 82573 Errata 17 */
+ if (((adapter->hw.mac.type == e1000_82573) ||
+ (adapter->hw.mac.type == e1000_82574)) &&
+ (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
+ adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
+ e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
+ }
+
while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
msleep(1);
/* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
}
}
-static void e1000e_disable_l1aspm(struct pci_dev *pdev)
+#ifdef CONFIG_PCIEASPM
+static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ pci_disable_link_state(pdev, state);
+}
+#else
+static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
{
int pos;
- u16 val;
+ u16 reg16;
/*
- * 82573 workaround - disable L1 ASPM on mobile chipsets
- *
- * L1 ASPM on various mobile (ich7) chipsets do not behave properly
- * resulting in lost data or garbage information on the pci-e link
- * level. This could result in (false) bad EEPROM checksum errors,
- * long ping times (up to 2s) or even a system freeze/hang.
- *
- * Unfortunately this feature saves about 1W power consumption when
- * active.
+ * Both device and parent should have the same ASPM setting.
+ * Disable ASPM in downstream component first and then upstream.
*/
- pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
- if (val & 0x2) {
- dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
- val &= ~0x2;
- pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val);
- }
+ pos = pci_pcie_cap(pdev);
+ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
+ reg16 &= ~state;
+ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
+
+ if (!pdev->bus->self)
+ return;
+
+ pos = pci_pcie_cap(pdev->bus->self);
+ pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16);
+ reg16 &= ~state;
+ pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
+}
+#endif
+void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
+ (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
+ (state & PCIE_LINK_STATE_L1) ? "L1" : "");
+
+ __e1000e_disable_aspm(pdev, state);
}
#ifdef CONFIG_PM
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_save_state(pdev);
- e1000e_disable_l1aspm(pdev);
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+ e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
err = pci_enable_device_mem(pdev);
if (err) {
int err;
pci_ers_result_t result;
- e1000e_disable_l1aspm(pdev);
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+ e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
dev_warn(&adapter->pdev->dev,
"Warning: detected DSPD enabled in EEPROM\n");
}
-
- ret_val = e1000_read_nvm(hw, NVM_INIT_3GIO_3, 1, &buf);
- if (!ret_val && (le16_to_cpu(buf) & (3 << 2))) {
- /* ASPM enable */
- dev_warn(&adapter->pdev->dev,
- "Warning: detected ASPM enabled in EEPROM\n");
- }
}
static const struct net_device_ops e1000e_netdev_ops = {
u16 eeprom_data = 0;
u16 eeprom_apme_mask = E1000_EEPROM_APME;
- e1000e_disable_l1aspm(pdev);
+ if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
+ e1000e_disable_aspm(pdev, PCIE_LINK_STATE_L1);
err = pci_enable_device_mem(pdev);
if (err)
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/mca-legacy.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/udp.h>
#include <linux/if.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/if_ether.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
*/
#include <linux/mm.h>
+#include <linux/slab.h>
#include "ehea.h"
#include "ehea_phyp.h"
#include "ehea_qmr.h"
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/if_ether.h>
+#include <linux/slab.h>
#include "vnic_resource.h"
#include "vnic_devcmd.h"
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "vnic_dev.h"
#include "vnic_rq.h"
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "vnic_dev.h"
#include "vnic_wq.h"
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/netdevice.h>
#include <net/net_namespace.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/ethoc.h>
static int buffer_size = 0x8000; /* 32 KBytes */
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
(dev->dev_addr[1] << 16) | (dev->dev_addr[0] << 24),
fep->hwp + FEC_ADDR_LOW);
writel((dev->dev_addr[5] << 16) | (dev->dev_addr[4] << 24),
- fep + FEC_ADDR_HIGH);
+ fep->hwp + FEC_ADDR_HIGH);
return 0;
}
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/netdevice.h>
#include <linux/phy.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <linux/of_mdio.h>
#include <asm/io.h>
#include <asm/mpc52xx.h>
#include <linux/init.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/io.h>
/* Limit the number of tx's outstanding for hw bug */
if (id->driver_data & DEV_NEED_TX_LIMIT) {
np->tx_limit = 1;
- if ((id->driver_data & DEV_NEED_TX_LIMIT2) &&
+ if (((id->driver_data & DEV_NEED_TX_LIMIT2) == DEV_NEED_TX_LIMIT2) &&
pci_dev->revision >= 0xA2)
np->tx_limit = 0;
}
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/of_device.h>
+#include <linux/gfp.h>
#include <asm/immap_cpm2.h>
#include <asm/mpc8260.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
+#include <linux/gfp.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
{
struct gfar __iomem *enet_regs;
- u32 __iomem *ioremap_tbipa;
- u64 addr, size;
/*
* This is mildly evil, but so is our hardware for doing this.
return &enet_regs->tbipa;
} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi")) {
- addr = of_translate_address(np, of_get_address(np, 1, &size, NULL));
- ioremap_tbipa = ioremap(addr, size);
- return ioremap_tbipa;
+ return of_iomap(np, 1);
} else
return NULL;
}
u32 __iomem *tbipa;
struct mii_bus *new_bus;
int tbiaddr = -1;
+ const u32 *addrp;
u64 addr = 0, size = 0;
int err = 0;
new_bus->priv = priv;
fsl_pq_mdio_bus_name(new_bus->id, np);
+ addrp = of_get_address(np, 0, &size, NULL);
+ if (!addrp) {
+ err = -EINVAL;
+ goto err_free_bus;
+ }
+
/* Set the PHY base address */
- addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+ addr = of_translate_address(np, addrp);
+ if (addr == OF_BAD_ADDR) {
+ err = -EINVAL;
+ goto err_free_bus;
+ }
+
map = ioremap(addr, size);
if (!map) {
err = -ENOMEM;
struct gfar_private *priv, const char *model)
{
u32 *queue_mask;
- u64 addr, size;
-
- addr = of_translate_address(np,
- of_get_address(np, 0, &size, NULL));
- priv->gfargrp[priv->num_grps].regs = ioremap(addr, size);
+ priv->gfargrp[priv->num_grps].regs = of_iomap(np, 0);
if (!priv->gfargrp[priv->num_grps].regs)
return -ENOMEM;
priv->rx_queue[i] = NULL;
for (i = 0; i < priv->num_tx_queues; i++) {
- priv->tx_queue[i] = (struct gfar_priv_tx_q *)kmalloc(
+ priv->tx_queue[i] = (struct gfar_priv_tx_q *)kzalloc(
sizeof (struct gfar_priv_tx_q), GFP_KERNEL);
if (!priv->tx_queue[i]) {
err = -ENOMEM;
}
for (i = 0; i < priv->num_rx_queues; i++) {
- priv->rx_queue[i] = (struct gfar_priv_rx_q *)kmalloc(
+ priv->rx_queue[i] = (struct gfar_priv_rx_q *)kzalloc(
sizeof (struct gfar_priv_rx_q), GFP_KERNEL);
if (!priv->rx_queue[i]) {
err = -ENOMEM;
/* provided which set of benchmarks. */
printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
for (i = 0; i < priv->num_rx_queues; i++)
- printk(KERN_INFO "%s: :RX BD ring size for Q[%d]: %d\n",
+ printk(KERN_INFO "%s: RX BD ring size for Q[%d]: %d\n",
dev->name, i, priv->rx_queue[i]->rx_ring_size);
for(i = 0; i < priv->num_tx_queues; i++)
- printk(KERN_INFO "%s:TX BD ring size for Q[%d]: %d\n",
+ printk(KERN_INFO "%s: TX BD ring size for Q[%d]: %d\n",
dev->name, i, priv->tx_queue[i]->tx_ring_size);
return 0;
tempval |= (DMACTRL_GRS | DMACTRL_GTS);
gfar_write(®s->dmactrl, tempval);
- while (!(gfar_read(®s->ievent) &
- (IEVENT_GRSC | IEVENT_GTSC)))
- cpu_relax();
+ spin_event_timeout(((gfar_read(®s->ievent) &
+ (IEVENT_GRSC | IEVENT_GTSC)) ==
+ (IEVENT_GRSC | IEVENT_GTSC)), -1, 0);
}
}
/* Go through all the buffer descriptors and free their data buffers */
for (i = 0; i < priv->num_tx_queues; i++) {
tx_queue = priv->tx_queue[i];
- if(!tx_queue->tx_skbuff)
+ if(tx_queue->tx_skbuff)
free_skb_tx_queue(tx_queue);
}
for (i = 0; i < priv->num_rx_queues; i++) {
rx_queue = priv->rx_queue[i];
- if(!rx_queue->rx_skbuff)
+ if(rx_queue->rx_skbuff)
free_skb_rx_queue(rx_queue);
}
* as many bytes as needed to align the data properly
*/
skb_reserve(skb, alignamount);
+ GFAR_CB(skb)->alignamount = alignamount;
return skb;
}
newskb = skb;
else if (skb) {
/*
- * We need to reset ->data to what it
+ * We need to un-reserve() the skb to what it
* was before gfar_new_skb() re-aligned
* it to an RXBUF_ALIGNMENT boundary
* before we put the skb back on the
* recycle list.
*/
- skb->data = skb->head + NET_SKB_PAD;
+ skb_reserve(skb, -GFAR_CB(skb)->alignamount);
__skb_queue_head(&priv->rx_recycle, skb);
}
} else {
u16 vlctl; /* VLAN control word */
};
+struct gianfar_skb_cb {
+ int alignamount;
+};
+
+#define GFAR_CB(skb) ((struct gianfar_skb_cb *)((skb)->cb))
+
struct rmon_mib
{
u32 tr64; /* 0x.680 - Transmit and Receive 64-byte Frame Counter */
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
#include <asm/byteorder.h>
#include <linux/time.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/rtnetlink.h>
#include <linux/sockios.h>
#include <linux/workqueue.h>
#include <linux/net.h>
#include <linux/in.h>
#include <linux/if.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/inet.h>
+#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/in.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/bitops.h>
#include <linux/workqueue.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/dcr.h>
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include "core.h"
#include <asm/dcr-regs.h>
* option) any later version.
*
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <asm/io.h>
* option) any later version.
*
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/ethtool.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/in.h>
#include <linux/ip.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <asm/hvcall.h>
#include <asm/atomic.h>
*/
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/if_ether.h>
#include "e1000_mac.h"
case E1000_DEV_ID_82576_FIBER:
case E1000_DEV_ID_82576_SERDES:
case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
case E1000_DEV_ID_82576_SERDES_QUAD:
mac->type = e1000_82576;
break;
#define E1000_DEV_ID_82576_FIBER 0x10E6
#define E1000_DEV_ID_82576_SERDES 0x10E7
#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
+#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
#define E1000_DEV_ID_82576_NS 0x150A
#define E1000_DEV_ID_82576_NS_SERDES 0x1518
#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
* igb_enable_mng_pass_thru - Enable processing of ARP's
* @hw: pointer to the HW structure
*
- * Verifies the hardware needs to allow ARPs to be processed by the host.
+ * Verifies the hardware needs to leave interface enabled so that frames can
+ * be directed to and from the management interface.
**/
bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
{
manc = rd32(E1000_MANC);
- if (!(manc & E1000_MANC_RCV_TCO_EN) ||
- !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ if (!(manc & E1000_MANC_RCV_TCO_EN))
goto out;
if (hw->mac.arc_subsystem_valid) {
/* TX */
struct igb_ring *tx_ring[16];
- unsigned long tx_queue_len;
u32 tx_timeout_count;
/* RX */
#include <linux/if_ether.h>
#include <linux/ethtool.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "igb.h"
retval = 0;
break;
case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
/* quad port adapters only support WoL on port A */
if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
wol->supported = 0;
#include <linux/pagemap.h>
#include <linux/netdevice.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/net_tstamp.h>
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
struct igb_ring *ring = adapter->rx_ring[i];
igb_alloc_rx_buffers_adv(ring, igb_desc_unused(ring));
}
-
-
- adapter->tx_queue_len = netdev->tx_queue_len;
}
/**
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
- netdev->tx_queue_len = adapter->tx_queue_len;
netif_carrier_off(netdev);
/* record the stats before reset*/
adapter->eeprom_wol = 0;
break;
case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
adapter->eeprom_wol = 0;
((ctrl & E1000_CTRL_RFCE) ? "RX" :
((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
- /* tweak tx_queue_len according to speed/duplex and
- * adjust the timeout factor */
- netdev->tx_queue_len = adapter->tx_queue_len;
+ /* adjust timeout factor according to speed/duplex */
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
case SPEED_10:
- netdev->tx_queue_len = 10;
adapter->tx_timeout_factor = 14;
break;
case SPEED_100:
- netdev->tx_queue_len = 100;
/* maybe add some timeout factor ? */
break;
}
struct net_device_stats *net_stats = igb_get_stats(adapter->netdev);
struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
- u32 rnbc, reg;
+ u32 reg, mpc;
u16 phy_tmp;
int i;
u64 bytes, packets;
adapter->stats.symerrs += rd32(E1000_SYMERRS);
adapter->stats.sec += rd32(E1000_SEC);
- adapter->stats.mpc += rd32(E1000_MPC);
+ mpc = rd32(E1000_MPC);
+ adapter->stats.mpc += mpc;
+ net_stats->rx_fifo_errors += mpc;
adapter->stats.scc += rd32(E1000_SCC);
adapter->stats.ecol += rd32(E1000_ECOL);
adapter->stats.mcc += rd32(E1000_MCC);
adapter->stats.gptc += rd32(E1000_GPTC);
adapter->stats.gotc += rd32(E1000_GOTCL);
rd32(E1000_GOTCH); /* clear GOTCL */
- rnbc = rd32(E1000_RNBC);
- adapter->stats.rnbc += rnbc;
- net_stats->rx_fifo_errors += rnbc;
+ adapter->stats.rnbc += rd32(E1000_RNBC);
adapter->stats.ruc += rd32(E1000_RUC);
adapter->stats.rfc += rd32(E1000_RFC);
adapter->stats.rjc += rd32(E1000_RJC);
{
struct igb_adapter *adapter = q_vector->adapter;
- if (vlan_tag)
+ if (vlan_tag && adapter->vlgrp)
vlan_gro_receive(&q_vector->napi, adapter->vlgrp,
vlan_tag, skb);
else
struct igbvf_ring *tx_ring /* One per active queue */
____cacheline_aligned_in_smp;
- unsigned long tx_queue_len;
unsigned int restart_queue;
u32 txd_cmd;
#include <linux/netdevice.h>
#include <linux/tcp.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/mii.h>
/* enable Report Status bit */
adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS;
-
- adapter->tx_queue_len = adapter->netdev->tx_queue_len;
}
/**
del_timer_sync(&adapter->watchdog_timer);
- netdev->tx_queue_len = adapter->tx_queue_len;
netif_carrier_off(netdev);
/* record the stats before reset*/
&adapter->link_duplex);
igbvf_print_link_info(adapter);
- /*
- * tweak tx_queue_len according to speed/duplex
- * and adjust the timeout factor
- */
- netdev->tx_queue_len = adapter->tx_queue_len;
+ /* adjust timeout factor according to speed/duplex */
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
case SPEED_10:
txb2b = 0;
- netdev->tx_queue_len = 10;
adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
txb2b = 0;
- netdev->tx_queue_len = 100;
/* maybe add some timeout factor ? */
break;
}
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#ifdef CONFIG_SERIAL_8250
#include <linux/serial_core.h>
*/
#include <linux/crc32.h>
#include <linux/ethtool.h>
+#include <linux/gfp.h>
#include <linux/mii.h>
#include <linux/mutex.h>
********************************************************************/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/serial_reg.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <net/irda/irda.h>
#include <net/irda/wrapper.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/init.h>
#include <asm/uaccess.h>
********************************************************************/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <net/irda/irda.h>
#include <net/irda/irmod.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <net/irda/wrapper.h>
#include <net/irda/irda_device.h>
#include <asm/clock.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/serial_reg.h>
#include <linux/dma-mapping.h>
#include <linux/pnp.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/mm.h>
#include <linux/ethtool.h>
#include <linux/if_ether.h>
+#include <linux/slab.h>
#include <asm/abs_addr.h>
#include <asm/iseries/mf.h>
#define IXGBE_MAX_FDIR_INDICES 64
#ifdef IXGBE_FCOE
#define IXGBE_MAX_FCOE_INDICES 8
+#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
+#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
+#else
+#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES
+#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES
#endif /* IXGBE_FCOE */
struct ixgbe_ring_feature {
int indices;
int mask;
} ____cacheline_internodealigned_in_smp;
-#define MAX_RX_QUEUES 128
-#define MAX_TX_QUEUES 128
#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \
? 8 : 1)
#define IXGBE_82599_MC_TBL_SIZE 128
#define IXGBE_82599_VFT_TBL_SIZE 128
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
if (hw->phy.multispeed_fiber) {
/* Set up dual speed SFP+ support */
mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ mac->ops.disable_tx_laser =
+ &ixgbe_disable_tx_laser_multispeed_fiber;
+ mac->ops.enable_tx_laser =
+ &ixgbe_enable_tx_laser_multispeed_fiber;
+ mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
} else {
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
if ((mac->ops.get_media_type(hw) ==
ixgbe_media_type_backplane) &&
(hw->phy.smart_speed == ixgbe_smart_speed_auto ||
return status;
}
+ /**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
+void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Disable tx laser; allow 100us to go dark per spec */
+ esdp_reg |= IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(100);
+}
+
+/**
+ * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively turning on the Tx
+ * laser on the PHY, effectively starting physical link.
+ **/
+void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Enable tx laser; allow 100ms to light up */
+ esdp_reg &= ~IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ msleep(100);
+}
+
+/**
+ * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * When the driver changes the link speeds that it can support,
+ * it sets autotry_restart to true to indicate that we need to
+ * initiate a new autotry session with the link partner. To do
+ * so, we set the speed then disable and re-enable the tx laser, to
+ * alert the link partner that it also needs to restart autotry on its
+ * end. This is consistent with true clause 37 autoneg, which also
+ * involves a loss of signal.
+ **/
+void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
+
+ if (hw->mac.autotry_restart) {
+ ixgbe_disable_tx_laser_multispeed_fiber(hw);
+ ixgbe_enable_tx_laser_multispeed_fiber(hw);
+ hw->mac.autotry_restart = false;
+ }
+}
+
/**
* ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
* @hw: pointer to hardware structure
hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
speed &= phy_link_speed;
- /*
- * When the driver changes the link speeds that it can support,
- * it sets autotry_restart to true to indicate that we need to
- * initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
- * alert the link partner that it also needs to restart autotry on its
- * end. This is consistent with true clause 37 autoneg, which also
- * involves a loss of signal.
- */
-
/*
* Try each speed one by one, highest priority first. We do this in
* software because 10gb fiber doesn't support speed autonegotiation.
/* Set the module link speed */
esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
/* Allow module to change analog characteristics (1G->10G) */
msleep(40);
return status;
/* Flap the tx laser if it has not already been done */
- if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- udelay(100);
-
- /* Enable tx laser; allow 2ms to light up per spec */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- msleep(2);
-
- hw->mac.autotry_restart = false;
- }
+ hw->mac.ops.flap_tx_laser(hw);
/*
* Wait for the controller to acquire link. Per IEEE 802.3ap,
esdp_reg &= ~IXGBE_ESDP_SDP5;
esdp_reg |= IXGBE_ESDP_SDP5_DIR;
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
/* Allow module to change analog characteristics (10G->1G) */
msleep(40);
return status;
/* Flap the tx laser if it has not already been done */
- if (hw->mac.autotry_restart) {
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- udelay(100);
-
- /* Enable tx laser; allow 2ms to light up per spec */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- msleep(2);
-
- hw->mac.autotry_restart = false;
- }
+ hw->mac.ops.flap_tx_laser(hw);
/* Wait for the link partner to also set speed */
msleep(100);
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
if (ixgbe_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ int i;
+ for (i = 0; i < adapter->num_vfs; i++) {
+ if (adapter->vfinfo[i].clear_to_send) {
+ netdev_warn(netdev, "%s",
+ "offline diagnostic is not "
+ "supported when VFs are "
+ "present\n");
+ data[0] = 1;
+ data[1] = 1;
+ data[2] = 1;
+ data[3] = 1;
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ clear_bit(__IXGBE_TESTING,
+ &adapter->state);
+ goto skip_ol_tests;
+ }
+ }
+ }
+
if (if_running)
/* indicate we're in test mode */
dev_close(netdev);
clear_bit(__IXGBE_TESTING, &adapter->state);
}
+skip_ol_tests:
msleep_interruptible(4 * 1000);
}
#include "ixgbe_dcb_82599.h"
#endif /* CONFIG_IXGBE_DCB */
#include <linux/if_ether.h>
+#include <linux/gfp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/fc/fc_fs.h>
addr = sg_dma_address(sg);
len = sg_dma_len(sg);
while (len) {
+ /* max number of buffers allowed in one DDP context */
+ if (j >= IXGBE_BUFFCNT_MAX) {
+ netif_err(adapter, drv, adapter->netdev,
+ "xid=%x:%d,%d,%d:addr=%llx "
+ "not enough descriptors\n",
+ xid, i, j, dmacount, (u64)addr);
+ goto out_noddp_free;
+ }
+
/* get the offset of length of current buffer */
thisoff = addr & ((dma_addr_t)bufflen - 1);
thislen = min((bufflen - thisoff), len);
len -= thislen;
addr += thislen;
j++;
- /* max number of buffers allowed in one DDP context */
- if (j > IXGBE_BUFFCNT_MAX) {
- DPRINTK(DRV, ERR, "xid=%x:%d,%d,%d:addr=%llx "
- "not enough descriptors\n",
- xid, i, j, dmacount, (u64)addr);
- goto out_noddp_free;
- }
}
}
/* only the last buffer may have non-full bufflen */
lastsize = thisoff + thislen;
fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
- fcbuff |= (j << IXGBE_FCBUFF_BUFFCNT_SHIFT);
+ fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
fcbuff |= (IXGBE_FCBUFF_VALID);
/* Enable L2 eth type filter for FCoE */
IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
(ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
+ /* Enable L2 eth type filter for FIP */
+ IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP),
+ (ETH_P_FIP | IXGBE_ETQF_FILTER_EN));
if (adapter->ring_feature[RING_F_FCOE].indices) {
/* Use multiple rx queues for FCoE by redirection table */
for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
}
IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+ fcoe_i = f->mask;
+ fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
+ IXGBE_ETQS_QUEUE_EN |
+ (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
} else {
/* Use single rx queue for FCoE */
fcoe_i = f->mask;
IXGBE_ETQS_QUEUE_EN |
(fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
}
+ /* send FIP frames to the first FCoE queue */
+ fcoe_i = f->mask;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
+ IXGBE_ETQS_QUEUE_EN |
+ (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
IXGBE_FCRXCTRL_FCOELLI |
netdev->vlan_features |= NETIF_F_FSO;
netdev->vlan_features |= NETIF_F_FCOE_MTU;
netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
- netdev_features_change(netdev);
ixgbe_init_interrupt_scheme(adapter);
+ netdev_features_change(netdev);
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
netdev->vlan_features &= ~NETIF_F_FSO;
netdev->vlan_features &= ~NETIF_F_FCOE_MTU;
netdev->fcoe_ddp_xid = 0;
- netdev_features_change(netdev);
ixgbe_cleanup_fcoe(adapter);
-
ixgbe_init_interrupt_scheme(adapter);
+ netdev_features_change(netdev);
+
if (netif_running(netdev))
netdev->netdev_ops->ndo_open(netdev);
rc = 0;
#include <linux/tcp.h>
#include <linux/pkt_sched.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/ethtool.h>
if (skb->prev)
skb = ixgbe_transform_rsc_queue(skb, &(rx_ring->rsc_count));
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
- if (IXGBE_RSC_CB(skb)->dma)
+ if (IXGBE_RSC_CB(skb)->dma) {
pci_unmap_single(pdev, IXGBE_RSC_CB(skb)->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ IXGBE_RSC_CB(skb)->dma = 0;
+ }
if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)
rx_ring->rsc_count += skb_shinfo(skb)->nr_frags;
else
else
ixgbe_configure_msi_and_legacy(adapter);
+ /* enable the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.enable_tx_laser(hw);
+
clear_bit(__IXGBE_DOWN, &adapter->state);
ixgbe_napi_enable_all(adapter);
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
msleep(1);
ixgbe_down(adapter);
+ /*
+ * If SR-IOV enabled then wait a bit before bringing the adapter
+ * back up to give the VFs time to respond to the reset. The
+ * two second wait is based upon the watchdog timer cycle in
+ * the VF driver.
+ */
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ msleep(2000);
ixgbe_up(adapter);
clear_bit(__IXGBE_RESETTING, &adapter->state);
}
rx_buffer_info->skb = NULL;
do {
struct sk_buff *this = skb;
- if (IXGBE_RSC_CB(this)->dma)
+ if (IXGBE_RSC_CB(this)->dma) {
pci_unmap_single(pdev, IXGBE_RSC_CB(this)->dma,
rx_ring->rx_buf_len,
PCI_DMA_FROMDEVICE);
+ IXGBE_RSC_CB(this)->dma = 0;
+ }
skb = skb->prev;
dev_kfree_skb(this);
} while (skb);
/* signal that we are down to the interrupt handler */
set_bit(__IXGBE_DOWN, &adapter->state);
+ /* power down the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.disable_tx_laser(hw);
+
/* disable receive for all VFs and wait one second */
if (adapter->num_vfs) {
- for (i = 0 ; i < adapter->num_vfs; i++)
- adapter->vfinfo[i].clear_to_send = 0;
-
/* ping all the active vfs to let them know we are going down */
ixgbe_ping_all_vfs(adapter);
+
/* Disable all VFTE/VFRE TX/RX */
ixgbe_disable_tx_rx(adapter);
+
+ /* Mark all the VFs as inactive */
+ for (i = 0 ; i < adapter->num_vfs; i++)
+ adapter->vfinfo[i].clear_to_send = 0;
}
/* disable receives */
autoneg = hw->phy.autoneg_advertised;
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+ hw->mac.autotry_restart = false;
if (hw->mac.ops.setup_link)
hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
#ifdef IXGBE_FCOE
if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- (skb->protocol == htons(ETH_P_FCOE))) {
+ ((skb->protocol == htons(ETH_P_FCOE)) ||
+ (skb->protocol == htons(ETH_P_FIP)))) {
txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
txq += adapter->ring_feature[RING_F_FCOE].mask;
return txq;
tx_ring = adapter->tx_ring[skb->queue_mapping];
- if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- (skb->protocol == htons(ETH_P_FCOE))) {
- tx_flags |= IXGBE_TX_FLAGS_FCOE;
#ifdef IXGBE_FCOE
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
#ifdef CONFIG_IXGBE_DCB
- tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
- << IXGBE_TX_FLAGS_VLAN_SHIFT);
- tx_flags |= ((adapter->fcoe.up << 13)
- << IXGBE_TX_FLAGS_VLAN_SHIFT);
-#endif
+ /* for FCoE with DCB, we force the priority to what
+ * was specified by the switch */
+ if ((skb->protocol == htons(ETH_P_FCOE)) ||
+ (skb->protocol == htons(ETH_P_FIP))) {
+ tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
+ << IXGBE_TX_FLAGS_VLAN_SHIFT);
+ tx_flags |= ((adapter->fcoe.up << 13)
+ << IXGBE_TX_FLAGS_VLAN_SHIFT);
+ }
#endif
+ /* flag for FCoE offloads */
+ if (skb->protocol == htons(ETH_P_FCOE))
+ tx_flags |= IXGBE_TX_FLAGS_FCOE;
}
+#endif
+
/* four things can cause us to need a context descriptor */
if (skb_is_gso(skb) ||
(skb->ip_summed == CHECKSUM_PARTIAL) ||
indices += min_t(unsigned int, num_possible_cpus(),
IXGBE_MAX_FCOE_INDICES);
#endif
- indices = min_t(unsigned int, indices, MAX_TX_QUEUES);
netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
if (!netdev) {
err = -ENOMEM;
goto err_eeprom;
}
+ /* power down the optics */
+ if (hw->phy.multispeed_fiber)
+ hw->mac.ops.disable_tx_laser(hw);
+
init_timer(&adapter->watchdog_timer);
adapter->watchdog_timer.function = &ixgbe_watchdog;
adapter->watchdog_timer.data = (unsigned long)adapter;
case IXGBE_DEV_ID_82599_KX4:
adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
IXGBE_WUFC_MC | IXGBE_WUFC_BC);
- /* Enable ACPI wakeup in GRC */
- IXGBE_WRITE_REG(hw, IXGBE_GRC,
- (IXGBE_READ_REG(hw, IXGBE_GRC) & ~IXGBE_GRC_APME));
break;
default:
adapter->wol = 0;
#define IXGBE_ETQF_FILTER_BCN 1
#define IXGBE_ETQF_FILTER_FCOE 2
#define IXGBE_ETQF_FILTER_1588 3
+#define IXGBE_ETQF_FILTER_FIP 4
/* VLAN Control Bit Masks */
#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */
#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */
s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
/* Link */
+ void (*disable_tx_laser)(struct ixgbe_hw *);
+ void (*enable_tx_laser)(struct ixgbe_hw *);
+ void (*flap_tx_laser)(struct ixgbe_hw *);
s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
#include <linux/types.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
int sizeof_stat;
int stat_offset;
int base_stat_offset;
+ int saved_reset_offset;
};
-#define IXGBEVF_STAT(m, b) sizeof(((struct ixgbevf_adapter *)0)->m), \
- offsetof(struct ixgbevf_adapter, m), \
- offsetof(struct ixgbevf_adapter, b)
+#define IXGBEVF_STAT(m, b, r) sizeof(((struct ixgbevf_adapter *)0)->m), \
+ offsetof(struct ixgbevf_adapter, m), \
+ offsetof(struct ixgbevf_adapter, b), \
+ offsetof(struct ixgbevf_adapter, r)
static struct ixgbe_stats ixgbe_gstrings_stats[] = {
- {"rx_packets", IXGBEVF_STAT(stats.vfgprc, stats.base_vfgprc)},
- {"tx_packets", IXGBEVF_STAT(stats.vfgptc, stats.base_vfgptc)},
- {"rx_bytes", IXGBEVF_STAT(stats.vfgorc, stats.base_vfgorc)},
- {"tx_bytes", IXGBEVF_STAT(stats.vfgotc, stats.base_vfgotc)},
- {"tx_busy", IXGBEVF_STAT(tx_busy, zero_base)},
- {"multicast", IXGBEVF_STAT(stats.vfmprc, stats.base_vfmprc)},
- {"rx_csum_offload_good", IXGBEVF_STAT(hw_csum_rx_good, zero_base)},
- {"rx_csum_offload_errors", IXGBEVF_STAT(hw_csum_rx_error, zero_base)},
- {"tx_csum_offload_ctxt", IXGBEVF_STAT(hw_csum_tx_good, zero_base)},
- {"rx_header_split", IXGBEVF_STAT(rx_hdr_split, zero_base)},
+ {"rx_packets", IXGBEVF_STAT(stats.vfgprc, stats.base_vfgprc,
+ stats.saved_reset_vfgprc)},
+ {"tx_packets", IXGBEVF_STAT(stats.vfgptc, stats.base_vfgptc,
+ stats.saved_reset_vfgptc)},
+ {"rx_bytes", IXGBEVF_STAT(stats.vfgorc, stats.base_vfgorc,
+ stats.saved_reset_vfgorc)},
+ {"tx_bytes", IXGBEVF_STAT(stats.vfgotc, stats.base_vfgotc,
+ stats.saved_reset_vfgotc)},
+ {"tx_busy", IXGBEVF_STAT(tx_busy, zero_base, zero_base)},
+ {"multicast", IXGBEVF_STAT(stats.vfmprc, stats.base_vfmprc,
+ stats.saved_reset_vfmprc)},
+ {"rx_csum_offload_good", IXGBEVF_STAT(hw_csum_rx_good, zero_base,
+ zero_base)},
+ {"rx_csum_offload_errors", IXGBEVF_STAT(hw_csum_rx_error, zero_base,
+ zero_base)},
+ {"tx_csum_offload_ctxt", IXGBEVF_STAT(hw_csum_tx_good, zero_base,
+ zero_base)},
+ {"rx_header_split", IXGBEVF_STAT(rx_hdr_split, zero_base, zero_base)},
};
#define IXGBE_QUEUE_STATS_LEN 0
ixgbe_gstrings_stats[i].stat_offset;
char *b = (char *)adapter +
ixgbe_gstrings_stats[i].base_stat_offset;
+ char *r = (char *)adapter +
+ ixgbe_gstrings_stats[i].saved_reset_offset;
data[i] = ((ixgbe_gstrings_stats[i].sizeof_stat ==
sizeof(u64)) ? *(u64 *)p : *(u32 *)p) -
((ixgbe_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)b : *(u32 *)b);
+ sizeof(u64)) ? *(u64 *)b : *(u32 *)b) +
+ ((ixgbe_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)r : *(u32 *)r);
}
}
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip6_checksum.h>
#include <linux/ethtool.h>
if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG)
mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + 10));
+ round_jiffies(jiffies + 1));
return IRQ_HANDLED;
}
(adapter->rx_ring[rxr].count - 1));
}
+static void ixgbevf_save_reset_stats(struct ixgbevf_adapter *adapter)
+{
+ /* Only save pre-reset stats if there are some */
+ if (adapter->stats.vfgprc || adapter->stats.vfgptc) {
+ adapter->stats.saved_reset_vfgprc += adapter->stats.vfgprc -
+ adapter->stats.base_vfgprc;
+ adapter->stats.saved_reset_vfgptc += adapter->stats.vfgptc -
+ adapter->stats.base_vfgptc;
+ adapter->stats.saved_reset_vfgorc += adapter->stats.vfgorc -
+ adapter->stats.base_vfgorc;
+ adapter->stats.saved_reset_vfgotc += adapter->stats.vfgotc -
+ adapter->stats.base_vfgotc;
+ adapter->stats.saved_reset_vfmprc += adapter->stats.vfmprc -
+ adapter->stats.base_vfmprc;
+ }
+}
+
+static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ adapter->stats.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
+ adapter->stats.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
+ adapter->stats.last_vfgorc |=
+ (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
+ adapter->stats.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
+ adapter->stats.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
+ adapter->stats.last_vfgotc |=
+ (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
+ adapter->stats.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
+
+ adapter->stats.base_vfgprc = adapter->stats.last_vfgprc;
+ adapter->stats.base_vfgorc = adapter->stats.last_vfgorc;
+ adapter->stats.base_vfgptc = adapter->stats.last_vfgptc;
+ adapter->stats.base_vfgotc = adapter->stats.last_vfgotc;
+ adapter->stats.base_vfmprc = adapter->stats.last_vfmprc;
+}
+
static int ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
/* enable transmits */
netif_tx_start_all_queues(netdev);
+ ixgbevf_save_reset_stats(adapter);
+ ixgbevf_init_last_counter_stats(adapter);
+
/* bring the link up in the watchdog, this could race with our first
* link up interrupt but shouldn't be a problem */
adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
return err;
}
-static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- adapter->stats.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
- adapter->stats.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
- adapter->stats.last_vfgorc |=
- (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
- adapter->stats.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
- adapter->stats.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
- adapter->stats.last_vfgotc |=
- (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
- adapter->stats.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
-
- adapter->stats.base_vfgprc = adapter->stats.last_vfgprc;
- adapter->stats.base_vfgorc = adapter->stats.last_vfgorc;
- adapter->stats.base_vfgptc = adapter->stats.last_vfgptc;
- adapter->stats.base_vfgotc = adapter->stats.last_vfgotc;
- adapter->stats.base_vfmprc = adapter->stats.last_vfmprc;
-}
-
#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter) \
{ \
u32 current_counter = IXGBE_READ_REG(hw, reg); \
if (!netif_carrier_ok(netdev)) {
hw_dbg(&adapter->hw, "NIC Link is Up %s, ",
((link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
- "10 Gbps" : "1 Gbps"));
+ "10 Gbps\n" : "1 Gbps\n"));
netif_carrier_on(netdev);
netif_tx_wake_all_queues(netdev);
} else {
}
}
-pf_has_reset:
ixgbevf_update_stats(adapter);
+pf_has_reset:
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = true;
if (hw->adapter_stopped) {
err = IXGBE_ERR_MBX;
printk(KERN_ERR "Unable to start - perhaps the PF"
- "Driver isn't up yet\n");
+ " Driver isn't up yet\n");
goto err_setup_reset;
}
}
struct ixgbevf_tx_buffer *tx_buffer_info;
unsigned int len;
unsigned int total = skb->len;
- unsigned int offset = 0, size, count = 0, i;
+ unsigned int offset = 0, size, count = 0;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
unsigned int f;
+ int i;
i = tx_ring->next_to_use;
/* setup the private structure */
err = ixgbevf_sw_init(adapter);
- ixgbevf_init_last_counter_stats(adapter);
-
#ifdef MAX_SKB_FRAGS
netdev->features = NETIF_F_SG |
NETIF_F_IP_CSUM |
adapter->netdev_registered = true;
+ ixgbevf_init_last_counter_stats(adapter);
+
/* print the MAC address */
hw_dbg(hw, "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
netdev->dev_addr[0],
u64 vfgorc;
u64 vfgotc;
u64 vfmprc;
+
+ u64 saved_reset_vfgprc;
+ u64 saved_reset_vfgptc;
+ u64 saved_reset_vfgorc;
+ u64 saved_reset_vfgotc;
+ u64 saved_reset_vfmprc;
};
struct ixgbevf_info {
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/gfp.h>
#include <asm/hardware/uengine.h>
#include <asm/io.h>
#include "ixp2400_rx.ucode"
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
+#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/if_vlan.h>
+#include <linux/slab.h>
#include <net/ip6_checksum.h>
#include "jme.h"
jme->jme_vlan_rx(skb, jme->vlgrp,
le16_to_cpu(rxdesc->descwb.vlan));
NET_STAT(jme).rx_bytes += 4;
+ } else {
+ dev_kfree_skb(skb);
}
} else {
jme->jme_rx(skb);
jme_reset_link(jme);
}
+static inline void jme_pause_rx(struct jme_adapter *jme)
+{
+ atomic_dec(&jme->link_changing);
+
+ jme_set_rx_pcc(jme, PCC_OFF);
+ if (test_bit(JME_FLAG_POLL, &jme->flags)) {
+ JME_NAPI_DISABLE(jme);
+ } else {
+ tasklet_disable(&jme->rxclean_task);
+ tasklet_disable(&jme->rxempty_task);
+ }
+}
+
+static inline void jme_resume_rx(struct jme_adapter *jme)
+{
+ struct dynpcc_info *dpi = &(jme->dpi);
+
+ if (test_bit(JME_FLAG_POLL, &jme->flags)) {
+ JME_NAPI_ENABLE(jme);
+ } else {
+ tasklet_hi_enable(&jme->rxclean_task);
+ tasklet_hi_enable(&jme->rxempty_task);
+ }
+ dpi->cur = PCC_P1;
+ dpi->attempt = PCC_P1;
+ dpi->cnt = 0;
+ jme_set_rx_pcc(jme, PCC_P1);
+
+ atomic_inc(&jme->link_changing);
+}
+
static void
jme_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
{
struct jme_adapter *jme = netdev_priv(netdev);
+ jme_pause_rx(jme);
jme->vlgrp = grp;
+ jme_resume_rx(jme);
}
static void
#define __JME_H_INCLUDED__
#define DRV_NAME "jme"
-#define DRV_VERSION "1.0.5"
+#define DRV_VERSION "1.0.6"
#define PFX DRV_NAME ": "
#define PCI_DEVICE_ID_JMICRON_JMC250 0x0250
txb = skb_dequeue(&ks->txq);
last = skb_queue_empty(&ks->txq);
- ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
- ks8851_wrpkt(ks, txb, last);
- ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
- ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+ if (txb != NULL) {
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);
+ ks8851_wrpkt(ks, txb, last);
+ ks8851_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+ ks8851_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
- ks8851_done_tx(ks, txb);
+ ks8851_done_tx(ks, txb);
+ }
}
mutex_unlock(&ks->lock);
crc >>= (32 - 6); /* get top six bits */
rxctrl.mchash[crc >> 4] |= (1 << (crc & 0xf));
- mcptr = mcptr->next;
}
rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA;
#include <linux/mii.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#define DRV_NAME "ks8851_mll"
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/sched.h>
+#include <linux/slab.h>
/* DMA Registers */
int len;
if (eeprom->magic != EEPROM_MAGIC)
- return 1;
+ return -EINVAL;
len = (eeprom->offset + eeprom->len + 1) / 2;
for (i = eeprom->offset / 2; i < len; i++)
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/gfp.h>
/* DEBUG flags
*/
#include <linux/in.h>
#include <linux/io.h>
#include <linux/ip.h>
+#include <linux/slab.h>
#include "ll_temac.h"
#include <linux/phy.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/slab.h>
#include <linux/of_mdio.h>
#include "ll_temac.h"
#include <linux/ioport.h>
#include <linux/nubus.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/nubus.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/crc32.h>
#include <linux/spinlock.h>
#include <linux/bitrev.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#include <linux/bitrev.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/macintosh.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
+#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/nubus.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/bitrev.h>
+#include <linux/slab.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
#include <linux/cache.h>
#include <linux/sched.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/cdev.h>
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/errno.h>
*/
#include <linux/hardirq.h>
+#include <linux/gfp.h>
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/cq.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/device.h>
#include <linux/tcp.h>
#include <linux/if_vlan.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/device.h>
*
*/
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mlx4/qp.h>
*/
#include <linux/mlx4/cq.h>
+#include <linux/slab.h>
#include <linux/mlx4/qp.h>
#include <linux/skbuff.h>
#include <linux/if_ether.h>
#include <asm/page.h>
#include <linux/mlx4/cq.h>
+#include <linux/slab.h>
#include <linux/mlx4/qp.h>
#include <linux/skbuff.h>
#include <linux/if_vlan.h>
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <linux/mlx4/cmd.h>
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "mlx4.h"
struct mlx4_device_context {
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/mlx4/device.h>
#include <linux/mlx4/doorbell.h>
*/
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/mlx4/cmd.h>
*/
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/mlx4/cmd.h>
* SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "mlx4.h"
#include "fw.h"
* SOFTWARE.
*/
+#include <linux/gfp.h>
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
*/
#include <linux/mlx4/cmd.h>
+#include <linux/gfp.h>
#include "mlx4.h"
#include "icm.h"
#include <linux/io.h>
#include <linux/types.h>
#include <linux/inet_lro.h>
+#include <linux/slab.h>
#include <asm/system.h>
static char mv643xx_eth_driver_name[] = "mv643xx_eth";
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
/* Used for the temporal inet entries and routing */
#include <linux/socket.h>
#include <linux/route.h>
#include <linux/moduleparam.h>
#include <linux/io.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/ip.h>
#include <net/tcp.h>
if (pause->tx_pause != mgp->pause)
return myri10ge_change_pause(mgp, pause->tx_pause);
if (pause->rx_pause != mgp->pause)
- return myri10ge_change_pause(mgp, pause->tx_pause);
+ return myri10ge_change_pause(mgp, pause->rx_pause);
if (pause->autoneg != 0)
return -EINVAL;
return 0;
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/firmware.h>
+#include <linux/gfp.h>
#include <net/dst.h>
#include <net/arp.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/console.h>
#include <linux/moduleparam.h>
#include <linux/string.h>
#define _NETXEN_NIC_LINUX_MAJOR 4
#define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 72
-#define NETXEN_NIC_LINUX_VERSIONID "4.0.72"
+#define _NETXEN_NIC_LINUX_SUBVERSION 73
+#define NETXEN_NIC_LINUX_VERSIONID "4.0.73"
#define NETXEN_VERSION_CODE(a, b, c) (((a) << 24) + ((b) << 16) + (c))
#define _major(v) (((v) >> 24) & 0xff)
}
sds_ring->desc_head = (struct status_desc *)addr;
- sds_ring->crb_sts_consumer =
- netxen_get_ioaddr(adapter,
- recv_crb_registers[port].crb_sts_consumer[ring]);
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ sds_ring->crb_sts_consumer =
+ netxen_get_ioaddr(adapter,
+ recv_crb_registers[port].crb_sts_consumer[ring]);
- sds_ring->crb_intr_mask =
- netxen_get_ioaddr(adapter,
- recv_crb_registers[port].sw_int_mask[ring]);
+ sds_ring->crb_intr_mask =
+ netxen_get_ioaddr(adapter,
+ recv_crb_registers[port].sw_int_mask[ring]);
+ }
}
*
*/
+#include <linux/slab.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
#include <linux/netdevice.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
if (adapter->fw_type == NX_UNIFIED_ROMIMAGE) {
bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
+ NX_UNI_BIOS_VERSION_OFF));
- return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) +
+ return (bios_ver << 16) + ((bios_ver >> 8) & 0xff00) +
(bios_ver >> 24);
} else
return cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
*
*/
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include "netxen_nic_hw.h"
static int
netxen_setup_pci_map(struct netxen_adapter *adapter)
{
- void __iomem *mem_ptr0 = NULL;
- void __iomem *mem_ptr1 = NULL;
- void __iomem *mem_ptr2 = NULL;
void __iomem *db_ptr = NULL;
resource_size_t mem_base, db_base;
- unsigned long mem_len, db_len = 0, pci_len0 = 0;
+ unsigned long mem_len, db_len = 0;
struct pci_dev *pdev = adapter->pdev;
int pci_func = adapter->ahw.pci_func;
+ struct netxen_hardware_context *ahw = &adapter->ahw;
int err = 0;
/* 128 Meg of memory */
if (mem_len == NETXEN_PCI_128MB_SIZE) {
- mem_ptr0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE);
- mem_ptr1 = ioremap(mem_base + SECOND_PAGE_GROUP_START,
+
+ ahw->pci_base0 = ioremap(mem_base, FIRST_PAGE_GROUP_SIZE);
+ ahw->pci_base1 = ioremap(mem_base + SECOND_PAGE_GROUP_START,
SECOND_PAGE_GROUP_SIZE);
- mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START,
+ ahw->pci_base2 = ioremap(mem_base + THIRD_PAGE_GROUP_START,
THIRD_PAGE_GROUP_SIZE);
- pci_len0 = FIRST_PAGE_GROUP_SIZE;
+ if (ahw->pci_base0 == NULL || ahw->pci_base1 == NULL ||
+ ahw->pci_base2 == NULL) {
+ dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+ err = -EIO;
+ goto err_out;
+ }
+
+ ahw->pci_len0 = FIRST_PAGE_GROUP_SIZE;
+
} else if (mem_len == NETXEN_PCI_32MB_SIZE) {
- mem_ptr1 = ioremap(mem_base, SECOND_PAGE_GROUP_SIZE);
- mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START -
+
+ ahw->pci_base1 = ioremap(mem_base, SECOND_PAGE_GROUP_SIZE);
+ ahw->pci_base2 = ioremap(mem_base + THIRD_PAGE_GROUP_START -
SECOND_PAGE_GROUP_START, THIRD_PAGE_GROUP_SIZE);
+ if (ahw->pci_base1 == NULL || ahw->pci_base2 == NULL) {
+ dev_err(&pdev->dev, "failed to map PCI bar 0\n");
+ err = -EIO;
+ goto err_out;
+ }
+
} else if (mem_len == NETXEN_PCI_2MB_SIZE) {
- mem_ptr0 = pci_ioremap_bar(pdev, 0);
- if (mem_ptr0 == NULL) {
+ ahw->pci_base0 = pci_ioremap_bar(pdev, 0);
+ if (ahw->pci_base0 == NULL) {
dev_err(&pdev->dev, "failed to map PCI bar 0\n");
return -EIO;
}
- pci_len0 = mem_len;
+ ahw->pci_len0 = mem_len;
} else {
return -EIO;
}
dev_info(&pdev->dev, "%dMB memory map\n", (int)(mem_len>>20));
- adapter->ahw.pci_base0 = mem_ptr0;
- adapter->ahw.pci_len0 = pci_len0;
- adapter->ahw.pci_base1 = mem_ptr1;
- adapter->ahw.pci_base2 = mem_ptr2;
-
if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
adapter->ahw.ocm_win_crb = netxen_get_ioaddr(adapter,
NETXEN_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(pci_func)));
int pci_func_id = PCI_FUNC(pdev->devfn);
uint8_t revision_id;
- if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
- pr_warning("%s: chip revisions between 0x%x-0x%x"
+ if (pdev->revision >= NX_P3_A0 && pdev->revision <= NX_P3_B1) {
+ pr_warning("%s: chip revisions between 0x%x-0x%x "
"will not be enabled.\n",
module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
return -ENODEV;
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/crc32.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/if_vlan.h>
#include <linux/rtnetlink.h>
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
+#include <linux/slab.h>
#include <linux/phy.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/dmaengine.h>
#include <linux/delay.h>
inw(ioaddr + EL3_STATUS));
spin_lock_irqsave(&lp->window_lock, flags);
+
+ dev->stats.tx_bytes += skb->len;
+
+ /* Put out the doubleword header... */
outw(skb->len, ioaddr + TX_FIFO);
outw(0, ioaddr + TX_FIFO);
+ /* ... and the packet rounded to a doubleword. */
outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2);
dev->trans_start = jiffies;
/* BadSSD */ inb(ioaddr + 12);
up = inb(ioaddr + 13);
- dev->stats.tx_bytes += tx + ((up & 0xf0) << 12);
-
EL3WINDOW(1);
}
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
+ PCMCIA_PFC_DEVICE_PROD_ID12(0, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("Allied Telesis,K.K", "Ethernet LAN Card", 0x2ad62f3c, 0x9fd2f0a2, "cis/LA-PCM.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "cis/PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
{
struct net_device *dev = priv;
cisparse_t parse;
+ u8 *buf;
if (pcmcia_parse_tuple(tuple, &parse))
return -EINVAL;
- if ((parse.version_1.ns > 3) &&
- (cvt_ascii_address(dev,
- (parse.version_1.str + parse.version_1.ofs[3]))))
+ buf = parse.version_1.str + parse.version_1.ofs[3];
+
+ if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0))
return 0;
return -EINVAL;
len = pcmcia_get_tuple(link, 0x81, &buf);
if (buf && len >= 13) {
buf[12] = '\0';
- if (cvt_ascii_address(dev, buf))
+ if (cvt_ascii_address(dev, buf) == 0)
rc = 0;
}
kfree(buf);
if (i != 0) {
printk(KERN_NOTICE "smc91c92_cs: Unable to find hardware address.\n");
- goto config_undo;
+ goto config_failed;
}
smc->duplex = 0;
unregister_netdev(dev);
config_failed:
smc91c92_release(link);
+ free_netdev(dev);
return -ENODEV;
} /* smc91c92_config */
{
unsigned int ioaddr = dev->base_addr;
struct smc_private *smc = netdev_priv(dev);
- u_int multicast_table[ 2 ] = { 0, };
+ unsigned char multicast_table[8];
unsigned long flags;
u_short rx_cfg_setting;
+ int i;
+
+ memset(multicast_table, 0, sizeof(multicast_table));
if (dev->flags & IFF_PROMISC) {
rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti;
netdev_for_each_mc_addr(mc_addr, dev) {
u_int position = ether_crc(6, mc_addr->dmi_addr);
-#ifndef final_version /* Verify multicast address. */
- if ((mc_addr->dmi_addr[0] & 1) == 0)
- continue;
-#endif
multicast_table[position >> 29] |= 1 << ((position >> 26) & 7);
}
}
/* Load MC table and Rx setting into the chip without interrupts. */
spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
- outl(multicast_table[0], ioaddr + MULTICAST0);
- outl(multicast_table[1], ioaddr + MULTICAST4);
+ for (i = 0; i < 8; i++)
+ outb(multicast_table[i], ioaddr + MULTICAST0 + i);
SMC_SELECT_BANK(0);
outw(rx_cfg_setting, ioaddr + RCR);
SMC_SELECT_BANK(2);
SMC_SELECT_BANK(1);
media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
+ SMC_SELECT_BANK(saved_bank);
+ spin_unlock_irqrestore(&smc->lock, flags);
+
/* Check for pending interrupt with watchdog flag set: with
this, we can limp along even if the interrupt is blocked */
if (smc->watchdog++ && ((i>>8) & i)) {
if (!smc->fast_poll)
printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ local_irq_save(flags);
smc_interrupt(dev->irq, dev);
+ local_irq_restore(flags);
smc->fast_poll = HZ;
}
if (smc->fast_poll) {
smc->fast_poll--;
smc->media.expires = jiffies + HZ/100;
add_timer(&smc->media);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
return;
}
+ spin_lock_irqsave(&smc->lock, flags);
+
+ saved_bank = inw(ioaddr + BANK_SELECT);
+
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id < 0)
goto reschedule;
unsigned int ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int ret;
+ unsigned long flags;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
if (smc->cfg & CFG_MII_SELECT)
ret = mii_ethtool_gset(&smc->mii_if, ecmd);
else
ret = smc_netdev_get_ecmd(dev, ecmd);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return ret;
}
unsigned int ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int ret;
+ unsigned long flags;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
if (smc->cfg & CFG_MII_SELECT)
ret = mii_ethtool_sset(&smc->mii_if, ecmd);
else
ret = smc_netdev_set_ecmd(dev, ecmd);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return ret;
}
unsigned int ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
u32 ret;
+ unsigned long flags;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
ret = smc_link_ok(dev);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return ret;
}
int rc = 0;
u16 saved_bank;
unsigned int ioaddr = dev->base_addr;
+ unsigned long flags;
if (!netif_running(dev))
return -EINVAL;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
saved_bank = inw(ioaddr + BANK_SELECT);
SMC_SELECT_BANK(3);
rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return rc;
}
---help---
Supports the LSI ET1011C PHY.
+config MICREL_PHY
+ tristate "Driver for Micrel PHYs"
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
obj-$(CONFIG_NATIONAL_PHY) += national.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/err.h>
+#include <linux/slab.h>
#define MII_REGS_NUM 29
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mdio-bitbang.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <linux/delay.h>
* Copyright (C) 2009 Cavium Networks
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
static int __init octeon_mdiobus_probe(struct platform_device *pdev)
{
struct octeon_mdiobus *bus;
+ union cvmx_smix_en smi_en;
int i;
int err = -ENOENT;
if (!bus->mii_bus)
goto err;
+ smi_en.u64 = 0;
+ smi_en.s.en = 1;
+ cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
+
/*
* Standard Octeon evaluation boards don't support phy
* interrupts, we need to poll.
err:
devm_kfree(&pdev->dev, bus);
+ smi_en.u64 = 0;
+ cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
return err;
}
static int __exit octeon_mdiobus_remove(struct platform_device *pdev)
{
struct octeon_mdiobus *bus;
+ union cvmx_smix_en smi_en;
bus = dev_get_drvdata(&pdev->dev);
mdiobus_unregister(bus->mii_bus);
mdiobus_free(bus->mii_bus);
+ smi_en.u64 = 0;
+ cvmx_write_csr(CVMX_SMIX_EN(bus->unit), smi_en.u64);
return 0;
}
--- /dev/null
+/*
+ * drivers/net/phy/micrel.c
+ *
+ * Driver for Micrel PHYs
+ *
+ * Author: David J. Choi
+ *
+ * Copyright (c) 2010 Micrel, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Support : ksz9021 , vsc8201, ks8001
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define PHY_ID_KSZ9021 0x00221611
+#define PHY_ID_VSC8201 0x000FC413
+#define PHY_ID_KS8001 0x0022161A
+
+
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ return 0;
+}
+
+
+static struct phy_driver ks8001_driver = {
+ .phy_id = PHY_ID_KS8001,
+ .phy_id_mask = 0x00fffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_POLL,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver vsc8201_driver = {
+ .phy_id = PHY_ID_VSC8201,
+ .name = "Micrel VSC8201",
+ .phy_id_mask = 0x00fffff0,
+ .features = PHY_BASIC_FEATURES,
+ .flags = PHY_POLL,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver ksz9021_driver = {
+ .phy_id = PHY_ID_KSZ9021,
+ .phy_id_mask = 0x000fff10,
+ .name = "Micrel KSZ9021 Gigabit PHY",
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause,
+ .flags = PHY_POLL,
+ .config_init = kszphy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE, },
+};
+
+static int __init ksphy_init(void)
+{
+ int ret;
+
+ ret = phy_driver_register(&ks8001_driver);
+ if (ret)
+ goto err1;
+ ret = phy_driver_register(&vsc8201_driver);
+ if (ret)
+ goto err2;
+
+ ret = phy_driver_register(&ksz9021_driver);
+ if (ret)
+ goto err3;
+ return 0;
+
+err3:
+ phy_driver_unregister(&vsc8201_driver);
+err2:
+ phy_driver_unregister(&ks8001_driver);
+err1:
+ return ret;
+}
+
+static void __exit ksphy_exit(void)
+{
+ phy_driver_unregister(&ks8001_driver);
+ phy_driver_unregister(&vsc8201_driver);
+ phy_driver_unregister(&ksz9021_driver);
+}
+
+module_init(ksphy_init);
+module_exit(ksphy_exit);
+
+MODULE_DESCRIPTION("Micrel PHY driver");
+MODULE_AUTHOR("David J. Choi");
+MODULE_LICENSE("GPL");
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/if_ether.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/string.h>
#include <linux/stddef.h>
#include <linux/device.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/slhc_vj.h>
#include <asm/atomic.h>
DECLARE_WAITQUEUE(wait, current);
ssize_t ret;
struct sk_buff *skb = NULL;
+ struct iovec iov;
ret = count;
if (skb->len > count)
goto outf;
ret = -EFAULT;
- if (copy_to_user(buf, skb->data, skb->len))
+ iov.iov_base = buf;
+ iov.iov_len = count;
+ if (skb_copy_datagram_iovec(skb, 0, &iov, skb->len))
goto outf;
ret = skb->len;
struct channel *pch = chan->ppp;
int proto;
- if (!pch || skb->len == 0) {
+ if (!pch) {
kfree_skb(skb);
return;
}
- proto = PPP_PROTO(skb);
read_lock_bh(&pch->upl);
+ if (!pskb_may_pull(skb, 2)) {
+ kfree_skb(skb);
+ if (pch->ppp) {
+ ++pch->ppp->dev->stats.rx_length_errors;
+ ppp_receive_error(pch->ppp);
+ }
+ goto done;
+ }
+
+ proto = PPP_PROTO(skb);
if (!pch->ppp || proto >= 0xc000 || proto == PPP_CCPFRAG) {
/* put it on the channel queue */
skb_queue_tail(&pch->file.rq, skb);
} else {
ppp_do_recv(pch->ppp, skb, pch);
}
+
+done:
read_unlock_bh(&pch->upl);
}
static void
ppp_receive_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
- if (pskb_may_pull(skb, 2)) {
+ /* note: a 0-length skb is used as an error indication */
+ if (skb->len > 0) {
#ifdef CONFIG_PPP_MULTILINK
/* XXX do channel-level decompression here */
if (PPP_PROTO(skb) == PPP_MP)
else
#endif /* CONFIG_PPP_MULTILINK */
ppp_receive_nonmp_frame(ppp, skb);
- return;
+ } else {
+ kfree_skb(skb);
+ ppp_receive_error(ppp);
}
-
- if (skb->len > 0)
- /* note: a 0-length skb is used as an error indication */
- ++ppp->dev->stats.rx_length_errors;
-
- kfree_skb(skb);
- ppp_receive_error(ppp);
}
static void
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#define PPP_VERSION "2.4.2"
#include <linux/string.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/net.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include "qlcnic.h"
+#include <linux/slab.h>
#include <net/ip.h>
#define MASK(n) ((1ULL<<(n))-1)
u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
u32 mode = VPORT_MISS_MODE_DROP;
+ if (adapter->is_up != QLCNIC_ADAPTER_UP_MAGIC)
+ return;
+
qlcnic_nic_add_mac(adapter, adapter->mac_addr);
qlcnic_nic_add_mac(adapter, bcast_addr);
#include <linux/netdevice.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "qlcnic.h"
struct crb_addr_pair {
*
*/
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
+
#include "qlge.h"
/* Read a NIC register from the alternate function. */
#include <linux/dma-mapping.h>
#include <linux/pagemap.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/dmapool.h>
#include <linux/mempool.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#define RX_DESC_SIZE (RX_DCNT * sizeof(struct r6040_descriptor))
#define TX_DESC_SIZE (TX_DCNT * sizeof(struct r6040_descriptor))
#define MBCR_DEFAULT 0x012A /* MAC Bus Control Register */
-#define MCAST_MAX 4 /* Max number multicast addresses to filter */
+#define MCAST_MAX 3 /* Max number multicast addresses to filter */
/* Descriptor status */
#define DSC_OWNER_MAC 0x8000 /* MAC is the owner of this descriptor */
crc >>= 26;
hash_table[crc >> 4] |= 1 << (15 - (crc & 0xf));
}
- /* Write the index of the hash table */
- for (i = 0; i < 4; i++)
- iowrite16(hash_table[i] << 14, ioaddr + MCR1);
/* Fill the MAC hash tables with their values */
iowrite16(hash_table[0], ioaddr + MAR0);
iowrite16(hash_table[1], ioaddr + MAR1);
iowrite16(adrp[1], ioaddr + MID_1M + 8 * i);
iowrite16(adrp[2], ioaddr + MID_1H + 8 * i);
} else {
- iowrite16(0xffff, ioaddr + MID_0L + 8 * i);
- iowrite16(0xffff, ioaddr + MID_0M + 8 * i);
- iowrite16(0xffff, ioaddr + MID_0H + 8 * i);
+ iowrite16(0xffff, ioaddr + MID_1L + 8 * i);
+ iowrite16(0xffff, ioaddr + MID_1M + 8 * i);
+ iowrite16(0xffff, ioaddr + MID_1H + 8 * i);
}
i++;
}
MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
-static int rx_copybreak = 200;
-static int use_dac = -1;
+/*
+ * we set our copybreak very high so that we don't have
+ * to allocate 16k frames all the time (see note in
+ * rtl8169_open()
+ */
+static int rx_copybreak = 16383;
+static int use_dac;
static struct {
u32 msg_enable;
} debug = { -1 };
module_param(rx_copybreak, int, 0);
MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
module_param(use_dac, int, 0);
-MODULE_PARM_DESC(use_dac, "Enable PCI DAC. -1 defaults on for PCI Express only."
-" Unsafe on 32 bit PCI slot.");
+MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
MODULE_LICENSE("GPL");
}
static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
- struct sk_buff *skb)
+ struct sk_buff *skb, int polling)
{
u32 opts2 = le32_to_cpu(desc->opts2);
struct vlan_group *vlgrp = tp->vlgrp;
int ret;
if (vlgrp && (opts2 & RxVlanTag)) {
- vlan_hwaccel_receive_skb(skb, vlgrp, swab16(opts2 & 0xffff));
+ __vlan_hwaccel_rx(skb, vlgrp, swab16(opts2 & 0xffff), polling);
ret = 0;
} else
ret = -1;
}
static int rtl8169_rx_vlan_skb(struct rtl8169_private *tp, struct RxDesc *desc,
- struct sk_buff *skb)
+ struct sk_buff *skb, int polling)
{
return -1;
}
{
iounmap(ioaddr);
pci_release_regions(pdev);
+ pci_clear_mwi(pdev);
pci_disable_device(pdev);
free_netdev(dev);
}
spin_lock_irq(&tp->lock);
RTL_W8(Cfg9346, Cfg9346_Unlock);
- RTL_W32(MAC0, low);
+
RTL_W32(MAC4, high);
+ RTL_R32(MAC4);
+
+ RTL_W32(MAC0, low);
+ RTL_R32(MAC0);
+
RTL_W8(Cfg9346, Cfg9346_Lock);
spin_unlock_irq(&tp->lock);
void __iomem *ioaddr;
unsigned int i;
int rc;
- int this_use_dac = use_dac;
if (netif_msg_drv(&debug)) {
printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n",
goto err_out_free_dev_1;
}
- rc = pci_set_mwi(pdev);
- if (rc < 0)
- goto err_out_disable_2;
+ if (pci_set_mwi(pdev) < 0)
+ netif_info(tp, probe, dev, "Mem-Wr-Inval unavailable\n");
/* make sure PCI base addr 1 is MMIO */
if (!(pci_resource_flags(pdev, region) & IORESOURCE_MEM)) {
"region #%d not an MMIO resource, aborting\n",
region);
rc = -ENODEV;
- goto err_out_mwi_3;
+ goto err_out_mwi_2;
}
/* check for weird/broken PCI region reporting */
netif_err(tp, probe, dev,
"Invalid PCI region size(s), aborting\n");
rc = -ENODEV;
- goto err_out_mwi_3;
+ goto err_out_mwi_2;
}
rc = pci_request_regions(pdev, MODULENAME);
if (rc < 0) {
netif_err(tp, probe, dev, "could not request regions\n");
- goto err_out_mwi_3;
+ goto err_out_mwi_2;
}
tp->cp_cmd = PCIMulRW | RxChkSum;
- tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
- if (!tp->pcie_cap)
- netif_info(tp, probe, dev, "no PCI Express capability\n");
-
- if (this_use_dac < 0)
- this_use_dac = tp->pcie_cap != 0;
-
if ((sizeof(dma_addr_t) > 4) &&
- this_use_dac &&
- !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- netif_info(tp, probe, dev, "using 64-bit DMA\n");
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && use_dac) {
tp->cp_cmd |= PCIDAC;
dev->features |= NETIF_F_HIGHDMA;
} else {
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc < 0) {
netif_err(tp, probe, dev, "DMA configuration failed\n");
- goto err_out_free_res_4;
+ goto err_out_free_res_3;
}
}
if (!ioaddr) {
netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
rc = -EIO;
- goto err_out_free_res_4;
+ goto err_out_free_res_3;
}
+ tp->pcie_cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+ if (!tp->pcie_cap)
+ netif_info(tp, probe, dev, "no PCI Express capability\n");
+
RTL_W16(IntrMask, 0x0000);
/* Soft reset the chip. */
if (i == ARRAY_SIZE(rtl_chip_info)) {
dev_err(&pdev->dev,
"driver bug, MAC version not found in rtl_chip_info\n");
- goto err_out_msi_5;
+ goto err_out_msi_4;
}
tp->chipset = i;
rc = register_netdev(dev);
if (rc < 0)
- goto err_out_msi_5;
+ goto err_out_msi_4;
pci_set_drvdata(pdev, dev);
out:
return rc;
-err_out_msi_5:
+err_out_msi_4:
rtl_disable_msi(pdev, tp);
iounmap(ioaddr);
-err_out_free_res_4:
+err_out_free_res_3:
pci_release_regions(pdev);
-err_out_mwi_3:
+err_out_mwi_2:
pci_clear_mwi(pdev);
-err_out_disable_2:
pci_disable_device(pdev);
err_out_free_dev_1:
free_netdev(dev);
}
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
- struct net_device *dev)
+ unsigned int mtu)
{
- unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+ unsigned int max_frame = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+ if (max_frame != 16383)
+ printk(KERN_WARNING PFX "WARNING! Changing of MTU on this "
+ "NIC may lead to frame reception errors!\n");
tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
}
int retval = -ENOMEM;
- rtl8169_set_rxbufsize(tp, dev);
+ /*
+ * Note that we use a magic value here, its wierd I know
+ * its done because, some subset of rtl8169 hardware suffers from
+ * a problem in which frames received that are longer than
+ * the size set in RxMaxSize register return garbage sizes
+ * when received. To avoid this we need to turn off filtering,
+ * which is done by setting a value of 16383 in the RxMaxSize register
+ * and allocating 16k frames to handle the largest possible rx value
+ * thats what the magic math below does.
+ */
+ rtl8169_set_rxbufsize(tp, 16383 - VLAN_ETH_HLEN - ETH_FCS_LEN);
/*
* Rx and Tx desscriptors needs 256 bytes alignment.
rtl8169_down(dev);
- rtl8169_set_rxbufsize(tp, dev);
+ rtl8169_set_rxbufsize(tp, dev->mtu);
ret = rtl8169_init_ring(dev);
if (ret < 0)
return done;
}
+/*
+ * Warning : rtl8169_rx_interrupt() might be called :
+ * 1) from NAPI (softirq) context
+ * (polling = 1 : we should call netif_receive_skb())
+ * 2) from process context (rtl8169_reset_task())
+ * (polling = 0 : we must call netif_rx() instead)
+ */
static int rtl8169_rx_interrupt(struct net_device *dev,
struct rtl8169_private *tp,
void __iomem *ioaddr, u32 budget)
{
unsigned int cur_rx, rx_left;
unsigned int delta, count;
+ int polling = (budget != ~(u32)0) ? 1 : 0;
cur_rx = tp->cur_rx;
rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
skb_put(skb, pkt_size);
skb->protocol = eth_type_trans(skb, dev);
- if (rtl8169_rx_vlan_skb(tp, desc, skb) < 0)
- netif_receive_skb(skb);
+ if (rtl8169_rx_vlan_skb(tp, desc, skb, polling) < 0) {
+ if (likely(polling))
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
+ }
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
mc_filter[1] = swab32(data);
}
- RTL_W32(MAR0 + 0, mc_filter[0]);
RTL_W32(MAR0 + 4, mc_filter[1]);
+ RTL_W32(MAR0 + 0, mc_filter[0]);
RTL_W32(RxConfig, tmp);
#include <linux/delay.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
+#include <linux/slab.h>
#include <linux/rio_ids.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/system.h>
#include <linux/tcp.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <net/tcp.h>
#include <asm/system.h>
#include <linux/errno.h>
#include <linux/if_cablemodem.h> /* for SIOGCM/SIOSCM stuff */
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/pnp.h>
#include <linux/init.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/processor.h>
sc->mii_bus = mdiobus_alloc();
if (sc->mii_bus == NULL) {
- sbmac_uninitctx(sc);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto uninit_ctx;
}
+ sc->mii_bus->name = sbmac_mdio_string;
+ snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
+ sc->mii_bus->priv = sc;
+ sc->mii_bus->read = sbmac_mii_read;
+ sc->mii_bus->write = sbmac_mii_write;
+ sc->mii_bus->irq = sc->phy_irq;
+ for (i = 0; i < PHY_MAX_ADDR; ++i)
+ sc->mii_bus->irq[i] = SBMAC_PHY_INT;
+
+ sc->mii_bus->parent = &pldev->dev;
+ /*
+ * Probe PHY address
+ */
+ err = mdiobus_register(sc->mii_bus);
+ if (err) {
+ printk(KERN_ERR "%s: unable to register MDIO bus\n",
+ dev->name);
+ goto free_mdio;
+ }
+ dev_set_drvdata(&pldev->dev, sc->mii_bus);
+
err = register_netdev(dev);
if (err) {
printk(KERN_ERR "%s.%d: unable to register netdev\n",
sbmac_string, idx);
- mdiobus_free(sc->mii_bus);
- sbmac_uninitctx(sc);
- return err;
+ goto unreg_mdio;
}
pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name);
pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n",
dev->name, base, eaddr);
- sc->mii_bus->name = sbmac_mdio_string;
- snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx);
- sc->mii_bus->priv = sc;
- sc->mii_bus->read = sbmac_mii_read;
- sc->mii_bus->write = sbmac_mii_write;
- sc->mii_bus->irq = sc->phy_irq;
- for (i = 0; i < PHY_MAX_ADDR; ++i)
- sc->mii_bus->irq[i] = SBMAC_PHY_INT;
-
- sc->mii_bus->parent = &pldev->dev;
- dev_set_drvdata(&pldev->dev, sc->mii_bus);
-
return 0;
+unreg_mdio:
+ mdiobus_unregister(sc->mii_bus);
+ dev_set_drvdata(&pldev->dev, NULL);
+free_mdio:
+ mdiobus_free(sc->mii_bus);
+uninit_ctx:
+ sbmac_uninitctx(sc);
+ return err;
}
goto out_err;
}
- /*
- * Probe PHY address
- */
- err = mdiobus_register(sc->mii_bus);
- if (err) {
- printk(KERN_ERR "%s: unable to register MDIO bus\n",
- dev->name);
- goto out_unirq;
- }
-
sc->sbm_speed = sbmac_speed_none;
sc->sbm_duplex = sbmac_duplex_none;
sc->sbm_fc = sbmac_fc_none;
return 0;
out_unregister:
- mdiobus_unregister(sc->mii_bus);
-
-out_unirq:
free_irq(dev->irq, dev);
-
out_err:
return err;
}
phy_disconnect(sc->phy_dev);
sc->phy_dev = NULL;
-
- mdiobus_unregister(sc->mii_bus);
-
free_irq(dev->irq, dev);
sbdma_emptyring(&(sc->sbm_txdma));
unregister_netdev(dev);
sbmac_uninitctx(sc);
+ mdiobus_unregister(sc->mii_bus);
mdiobus_free(sc->mii_bus);
iounmap(sc->sbm_base);
free_netdev(dev);
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/ethtool.h>
#include <linux/topology.h>
+#include <linux/gfp.h>
#include "net_driver.h"
#include "efx.h"
#include "mdio_10g.h"
}
if (disabled) {
+ dev_close(efx->net_dev);
EFX_ERR(efx, "has been disabled\n");
efx->state = STATE_DISABLED;
} else {
}
rtnl_lock();
- if (efx_reset(efx, efx->reset_pending))
- dev_close(efx->net_dev);
+ (void)efx_reset(efx, efx->reset_pending);
rtnl_unlock();
}
#include <linux/seq_file.h>
#include <linux/i2c.h>
#include <linux/mii.h>
+#include <linux/slab.h>
#include "net_driver.h"
#include "bitfield.h"
#include "efx.h"
EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad);
- falcon_probe_board(efx, board_rev);
+ rc = falcon_probe_board(efx, board_rev);
+ if (rc)
+ goto fail2;
kfree(nvconfig);
return 0;
},
};
-static const struct falcon_board_type falcon_dummy_board = {
- .init = efx_port_dummy_op_int,
- .init_phy = efx_port_dummy_op_void,
- .fini = efx_port_dummy_op_void,
- .set_id_led = efx_port_dummy_op_set_id_led,
- .monitor = efx_port_dummy_op_int,
-};
-
-void falcon_probe_board(struct efx_nic *efx, u16 revision_info)
+int falcon_probe_board(struct efx_nic *efx, u16 revision_info)
{
struct falcon_board *board = falcon_board(efx);
u8 type_id = FALCON_BOARD_TYPE(revision_info);
(efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
? board->type->ref_model : board->type->gen_type,
'A' + board->major, board->minor);
+ return 0;
} else {
EFX_ERR(efx, "unknown board type %d\n", type_id);
- board->type = &falcon_dummy_board;
+ return -ENODEV;
}
}
* Driver for PHY related operations via MCDI.
*/
+#include <linux/slab.h>
#include "efx.h"
#include "phy.h"
#include "mcdi.h"
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/rtnetlink.h>
#define EFX_DRIVER_NAME "sfc_mtd"
**************************************************************************
*/
-extern void falcon_probe_board(struct efx_nic *efx, u16 revision_info);
+extern int falcon_probe_board(struct efx_nic *efx, u16 revision_info);
/* TX data path */
extern int efx_nic_probe_tx(struct efx_tx_queue *tx_queue);
* Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
*/
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include "efx.h"
#include <linux/socket.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/in.h>
#include <linux/udp.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include "net_driver.h"
#include "efx.h"
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "net_driver.h"
#include "bitfield.h"
#include "efx.h"
static void siena_update_nic_stats(struct efx_nic *efx)
{
- while (siena_try_update_nic_stats(efx) == -EAGAIN)
- cpu_relax();
+ int retry;
+
+ /* If we're unlucky enough to read statistics wduring the DMA, wait
+ * up to 10ms for it to finish (typically takes <500us) */
+ for (retry = 0; retry < 100; ++retry) {
+ if (siena_try_update_nic_stats(efx) == 0)
+ return;
+ udelay(100);
+ }
+
+ /* Use the old values instead */
}
static void siena_start_nic_stats(struct efx_nic *efx)
#include <linux/delay.h>
#include <linux/rtnetlink.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "efx.h"
#include "mdio_10g.h"
#include "nic.h"
#include <linux/ip.h>
#include <linux/in.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/ipv6.h>
#include <linux/if_ether.h>
#include <linux/highmem.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/types.h>
/* Setup... */
len = skb->len;
if (len < ETH_ZLEN) {
- if (skb_padto(skb, ETH_ZLEN))
+ if (skb_padto(skb, ETH_ZLEN)) {
+ spin_unlock_irqrestore(&sp->tx_lock, flags);
return NETDEV_TX_OK;
+ }
len = ETH_ZLEN;
}
#include <linux/cache.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
#include "sh_eth.h"
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#define PHY_MAX_ADDR 32
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/fddidevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/mii.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include "skge.h"
#include <linux/ethtool.h>
#include <linux/pci.h>
#include <linux/ip.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <linux/tcp.h>
#include <linux/in.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/compat.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include "slip.h"
#ifdef CONFIG_INET
#include <linux/ip.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/bug.h>
#include <linux/bitops.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "smsc9420.h"
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/ioport.h>
#include <linux/ip.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/pci.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/tcp.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
tristate "STMicroelectronics 10/100/1000 Ethernet driver"
select MII
select PHYLIB
+ select CRC32
depends on NETDEVICES && CPU_SUBTYPE_ST40
help
This is the driver for the Ethernet IPs are built around a
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/slab.h>
#include "common.h"
#include "dwmac100.h"
*******************************************************************************/
#include <linux/crc32.h>
+#include <linux/slab.h>
#include "dwmac1000.h"
static void dwmac1000_core_init(unsigned long ioaddr)
#include <linux/phy.h>
#include <linux/if_vlan.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include "stmmac.h"
#define STMMAC_RESOURCE_NAME "stmmaceth"
}
pr_info("done!\n");
- if (!request_mem_region(res->start, (res->end - res->start),
+ if (!request_mem_region(res->start, resource_size(res),
pdev->name)) {
pr_err("%s: ERROR: memory allocation failed"
"cannot get the I/O addr 0x%x\n",
goto out;
}
- addr = ioremap(res->start, (res->end - res->start));
+ addr = ioremap(res->start, resource_size(res));
if (!addr) {
- pr_err("%s: ERROR: memory mapping failed \n", __func__);
+ pr_err("%s: ERROR: memory mapping failed\n", __func__);
ret = -ENOMEM;
goto out;
}
out:
if (ret < 0) {
platform_set_drvdata(pdev, NULL);
- release_mem_region(res->start, (res->end - res->start));
+ release_mem_region(res->start, resource_size(res));
if (addr != NULL)
iounmap(addr);
}
iounmap((void *)ndev->base_addr);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, (res->end - res->start));
+ release_mem_region(res->start, resource_size(res));
free_netdev(ndev);
#include <linux/mii.h>
#include <linux/phy.h>
+#include <linux/slab.h>
#include "stmmac.h"
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/gfp.h>
#include <asm/auxio.h>
#include <asm/byteorder.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/mutex.h>
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/firmware.h>
#include <asm/byteorder.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
/* Compile Time Switches */
/* start */
pci_disable_msi(tp->pdev);
tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI;
+ tp->napi[0].irq_vec = tp->pdev->irq;
err = tg3_request_irq(tp, 0);
if (err)
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/checksum.h>
#include <linux/module.h>
#include <linux/mca.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/time.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/time.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/rtnetlink.h>
#include <linux/timer.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <linux/rtnetlink.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/eisa.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/moduleparam.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include "tulip.h"
#include <linux/init.h>
#include <asm/unaligned.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "tulip.h"
#include <linux/init.h>
#include <linux/etherdevice.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
if ( !(rdes0 & 0x8000) ||
((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+ struct sk_buff *new_skb = NULL;
+
skb = rxptr->rx_skb_ptr;
/* Good packet, send to upper layer */
/* Shorst packet used new SKB */
- if ( (rxlen < RX_COPY_SIZE) &&
- ( (skb = dev_alloc_skb(rxlen + 2) )
- != NULL) ) {
+ if ((rxlen < RX_COPY_SIZE) &&
+ (((new_skb = dev_alloc_skb(rxlen + 2)) != NULL))) {
+ skb = new_skb;
/* size less than COPY_SIZE, allocate a rxlen SKB */
skb_reserve(skb, 2); /* 16byte align */
memcpy(skb_put(skb, rxlen),
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
}
}
+ /* Orphan the skb - required as we might hang on to it
+ * for indefinite time. */
+ skb_orphan(skb);
+
/* Enqueue packet */
skb_queue_tail(&tun->socket.sk->sk_receive_queue, skb);
dev->trans_start = jiffies;
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
cellular modem, as found on most Nokia handsets with the
"PC suite" USB profile.
+config USB_IPHETH
+ tristate "Apple iPhone USB Ethernet driver"
+ default n
+ ---help---
+ Module used to share Internet connection (tethering) from your
+ iPhone (Original, 3G and 3GS) to your system.
+ Note that you need userspace libraries and programs that are needed
+ to pair your device with your system and that understand the iPhone
+ protocol.
+
+ For more information: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+
+config USB_SIERRA_NET
+ tristate "USB-to-WWAN Driver for Sierra Wireless modems"
+ depends on USB_USBNET
+ help
+ Choose this option if you have a Sierra Wireless USB-to-WWAN device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sierra_net.
+
endmenu
obj-$(CONFIG_USB_USBNET) += usbnet.o
obj-$(CONFIG_USB_NET_INT51X1) += int51x1.o
obj-$(CONFIG_USB_CDC_PHONET) += cdc-phonet.o
+obj-$(CONFIG_USB_IPHETH) += ipheth.o
+obj-$(CONFIG_USB_SIERRA_NET) += sierra_net.o
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
#define DRIVER_VERSION "14-Jun-2006"
static const char driver_name [] = "asix";
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/ethtool.h>
#include <linux/crc32.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#undef DEBUG
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/netdevice.h>
#include <linux/crc32.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
/*
.bind = cdc_bind,
.unbind = usbnet_cdc_unbind,
.status = cdc_status,
+ .manage_power = cdc_manage_power,
};
/*-------------------------------------------------------------------------*/
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
/* datasheet:
http://ptm2.cc.utu.fi/ftp/network/cards/DM9601/From_NET/DM9601-DS-P01-930914.pdf
goto out;
dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
- dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1c : 0x14);
+ dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
for (i = 0; i < DM_TIMEOUT; i++) {
u8 tmp;
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
/*
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
+#include <linux/slab.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
--- /dev/null
+/*
+ * ipheth.c - Apple iPhone USB Ethernet driver
+ *
+ * Copyright (c) 2009 Diego Giagio <diego@giagio.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of GIAGIO.COM nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ *
+ * Attention: iPhone device must be paired, otherwise it won't respond to our
+ * driver. For more info: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#define USB_VENDOR_APPLE 0x05ac
+#define USB_PRODUCT_IPHONE 0x1290
+#define USB_PRODUCT_IPHONE_3G 0x1292
+#define USB_PRODUCT_IPHONE_3GS 0x1294
+
+#define IPHETH_USBINTF_CLASS 255
+#define IPHETH_USBINTF_SUBCLASS 253
+#define IPHETH_USBINTF_PROTO 1
+
+#define IPHETH_BUF_SIZE 1516
+#define IPHETH_TX_TIMEOUT (5 * HZ)
+
+#define IPHETH_INTFNUM 2
+#define IPHETH_ALT_INTFNUM 1
+
+#define IPHETH_CTRL_ENDP 0x00
+#define IPHETH_CTRL_BUF_SIZE 0x40
+#define IPHETH_CTRL_TIMEOUT (5 * HZ)
+
+#define IPHETH_CMD_GET_MACADDR 0x00
+#define IPHETH_CMD_CARRIER_CHECK 0x45
+
+#define IPHETH_CARRIER_CHECK_TIMEOUT round_jiffies_relative(1 * HZ)
+#define IPHETH_CARRIER_ON 0x04
+
+static struct usb_device_id ipheth_table[] = {
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3G,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_3GS,
+ IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+ IPHETH_USBINTF_PROTO) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ipheth_table);
+
+struct ipheth_device {
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct net_device *net;
+ struct sk_buff *tx_skb;
+ struct urb *tx_urb;
+ struct urb *rx_urb;
+ unsigned char *tx_buf;
+ unsigned char *rx_buf;
+ unsigned char *ctrl_buf;
+ u8 bulk_in;
+ u8 bulk_out;
+ struct delayed_work carrier_work;
+};
+
+static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags);
+
+static int ipheth_alloc_urbs(struct ipheth_device *iphone)
+{
+ struct urb *tx_urb = NULL;
+ struct urb *rx_urb = NULL;
+ u8 *tx_buf = NULL;
+ u8 *rx_buf = NULL;
+
+ tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (tx_urb == NULL)
+ goto error_nomem;
+
+ rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (rx_urb == NULL)
+ goto free_tx_urb;
+
+ tx_buf = usb_buffer_alloc(iphone->udev,
+ IPHETH_BUF_SIZE,
+ GFP_KERNEL,
+ &tx_urb->transfer_dma);
+ if (tx_buf == NULL)
+ goto free_rx_urb;
+
+ rx_buf = usb_buffer_alloc(iphone->udev,
+ IPHETH_BUF_SIZE,
+ GFP_KERNEL,
+ &rx_urb->transfer_dma);
+ if (rx_buf == NULL)
+ goto free_tx_buf;
+
+
+ iphone->tx_urb = tx_urb;
+ iphone->rx_urb = rx_urb;
+ iphone->tx_buf = tx_buf;
+ iphone->rx_buf = rx_buf;
+ return 0;
+
+free_tx_buf:
+ usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
+ tx_urb->transfer_dma);
+free_rx_urb:
+ usb_free_urb(rx_urb);
+free_tx_urb:
+ usb_free_urb(tx_urb);
+error_nomem:
+ return -ENOMEM;
+}
+
+static void ipheth_free_urbs(struct ipheth_device *iphone)
+{
+ usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, iphone->rx_buf,
+ iphone->rx_urb->transfer_dma);
+ usb_buffer_free(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
+ iphone->tx_urb->transfer_dma);
+ usb_free_urb(iphone->rx_urb);
+ usb_free_urb(iphone->tx_urb);
+}
+
+static void ipheth_kill_urbs(struct ipheth_device *dev)
+{
+ usb_kill_urb(dev->tx_urb);
+ usb_kill_urb(dev->rx_urb);
+}
+
+static void ipheth_rcvbulk_callback(struct urb *urb)
+{
+ struct ipheth_device *dev;
+ struct sk_buff *skb;
+ int status;
+ char *buf;
+ int len;
+
+ dev = urb->context;
+ if (dev == NULL)
+ return;
+
+ status = urb->status;
+ switch (status) {
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ return;
+ case 0:
+ break;
+ default:
+ err("%s: urb status: %d", __func__, urb->status);
+ return;
+ }
+
+ len = urb->actual_length;
+ buf = urb->transfer_buffer;
+
+ skb = dev_alloc_skb(NET_IP_ALIGN + len);
+ if (!skb) {
+ err("%s: dev_alloc_skb: -ENOMEM", __func__);
+ dev->net->stats.rx_dropped++;
+ return;
+ }
+
+ skb_reserve(skb, NET_IP_ALIGN);
+ memcpy(skb_put(skb, len), buf + NET_IP_ALIGN, len - NET_IP_ALIGN);
+ skb->dev = dev->net;
+ skb->protocol = eth_type_trans(skb, dev->net);
+
+ dev->net->stats.rx_packets++;
+ dev->net->stats.rx_bytes += len;
+
+ netif_rx(skb);
+ ipheth_rx_submit(dev, GFP_ATOMIC);
+}
+
+static void ipheth_sndbulk_callback(struct urb *urb)
+{
+ struct ipheth_device *dev;
+
+ dev = urb->context;
+ if (dev == NULL)
+ return;
+
+ if (urb->status != 0 &&
+ urb->status != -ENOENT &&
+ urb->status != -ECONNRESET &&
+ urb->status != -ESHUTDOWN)
+ err("%s: urb status: %d", __func__, urb->status);
+
+ dev_kfree_skb_irq(dev->tx_skb);
+ netif_wake_queue(dev->net);
+}
+
+static int ipheth_carrier_set(struct ipheth_device *dev)
+{
+ struct usb_device *udev = dev->udev;
+ int retval;
+
+ retval = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
+ IPHETH_CMD_CARRIER_CHECK, /* request */
+ 0xc0, /* request type */
+ 0x00, /* value */
+ 0x02, /* index */
+ dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
+ IPHETH_CTRL_TIMEOUT);
+ if (retval < 0) {
+ err("%s: usb_control_msg: %d", __func__, retval);
+ return retval;
+ }
+
+ if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON)
+ netif_carrier_on(dev->net);
+ else
+ netif_carrier_off(dev->net);
+
+ return 0;
+}
+
+static void ipheth_carrier_check_work(struct work_struct *work)
+{
+ struct ipheth_device *dev = container_of(work, struct ipheth_device,
+ carrier_work.work);
+
+ ipheth_carrier_set(dev);
+ schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
+}
+
+static int ipheth_get_macaddr(struct ipheth_device *dev)
+{
+ struct usb_device *udev = dev->udev;
+ struct net_device *net = dev->net;
+ int retval;
+
+ retval = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
+ IPHETH_CMD_GET_MACADDR, /* request */
+ 0xc0, /* request type */
+ 0x00, /* value */
+ 0x02, /* index */
+ dev->ctrl_buf,
+ IPHETH_CTRL_BUF_SIZE,
+ IPHETH_CTRL_TIMEOUT);
+ if (retval < 0) {
+ err("%s: usb_control_msg: %d", __func__, retval);
+ } else if (retval < ETH_ALEN) {
+ err("%s: usb_control_msg: short packet: %d bytes",
+ __func__, retval);
+ retval = -EINVAL;
+ } else {
+ memcpy(net->dev_addr, dev->ctrl_buf, ETH_ALEN);
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags)
+{
+ struct usb_device *udev = dev->udev;
+ int retval;
+
+ usb_fill_bulk_urb(dev->rx_urb, udev,
+ usb_rcvbulkpipe(udev, dev->bulk_in),
+ dev->rx_buf, IPHETH_BUF_SIZE,
+ ipheth_rcvbulk_callback,
+ dev);
+ dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ retval = usb_submit_urb(dev->rx_urb, mem_flags);
+ if (retval)
+ err("%s: usb_submit_urb: %d", __func__, retval);
+ return retval;
+}
+
+static int ipheth_open(struct net_device *net)
+{
+ struct ipheth_device *dev = netdev_priv(net);
+ struct usb_device *udev = dev->udev;
+ int retval = 0;
+
+ usb_set_interface(udev, IPHETH_INTFNUM, IPHETH_ALT_INTFNUM);
+
+ retval = ipheth_carrier_set(dev);
+ if (retval)
+ return retval;
+
+ retval = ipheth_rx_submit(dev, GFP_KERNEL);
+ if (retval)
+ return retval;
+
+ schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
+ netif_start_queue(net);
+ return retval;
+}
+
+static int ipheth_close(struct net_device *net)
+{
+ struct ipheth_device *dev = netdev_priv(net);
+
+ cancel_delayed_work_sync(&dev->carrier_work);
+ netif_stop_queue(net);
+ return 0;
+}
+
+static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
+{
+ struct ipheth_device *dev = netdev_priv(net);
+ struct usb_device *udev = dev->udev;
+ int retval;
+
+ /* Paranoid */
+ if (skb->len > IPHETH_BUF_SIZE) {
+ WARN(1, "%s: skb too large: %d bytes", __func__, skb->len);
+ dev->net->stats.tx_dropped++;
+ dev_kfree_skb_irq(skb);
+ return NETDEV_TX_OK;
+ }
+
+ memcpy(dev->tx_buf, skb->data, skb->len);
+ if (skb->len < IPHETH_BUF_SIZE)
+ memset(dev->tx_buf + skb->len, 0, IPHETH_BUF_SIZE - skb->len);
+
+ usb_fill_bulk_urb(dev->tx_urb, udev,
+ usb_sndbulkpipe(udev, dev->bulk_out),
+ dev->tx_buf, IPHETH_BUF_SIZE,
+ ipheth_sndbulk_callback,
+ dev);
+ dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
+ if (retval) {
+ err("%s: usb_submit_urb: %d", __func__, retval);
+ dev->net->stats.tx_errors++;
+ dev_kfree_skb_irq(skb);
+ } else {
+ dev->tx_skb = skb;
+
+ dev->net->stats.tx_packets++;
+ dev->net->stats.tx_bytes += skb->len;
+ netif_stop_queue(net);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static void ipheth_tx_timeout(struct net_device *net)
+{
+ struct ipheth_device *dev = netdev_priv(net);
+
+ err("%s: TX timeout", __func__);
+ dev->net->stats.tx_errors++;
+ usb_unlink_urb(dev->tx_urb);
+}
+
+static struct net_device_stats *ipheth_stats(struct net_device *net)
+{
+ struct ipheth_device *dev = netdev_priv(net);
+ return &dev->net->stats;
+}
+
+static u32 ipheth_ethtool_op_get_link(struct net_device *net)
+{
+ struct ipheth_device *dev = netdev_priv(net);
+ return netif_carrier_ok(dev->net);
+}
+
+static struct ethtool_ops ops = {
+ .get_link = ipheth_ethtool_op_get_link
+};
+
+static const struct net_device_ops ipheth_netdev_ops = {
+ .ndo_open = &ipheth_open,
+ .ndo_stop = &ipheth_close,
+ .ndo_start_xmit = &ipheth_tx,
+ .ndo_tx_timeout = &ipheth_tx_timeout,
+ .ndo_get_stats = &ipheth_stats,
+};
+
+static struct device_type ipheth_type = {
+ .name = "wwan",
+};
+
+static int ipheth_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_host_interface *hintf;
+ struct usb_endpoint_descriptor *endp;
+ struct ipheth_device *dev;
+ struct net_device *netdev;
+ int i;
+ int retval;
+
+ netdev = alloc_etherdev(sizeof(struct ipheth_device));
+ if (!netdev)
+ return -ENOMEM;
+
+ netdev->netdev_ops = &ipheth_netdev_ops;
+ netdev->watchdog_timeo = IPHETH_TX_TIMEOUT;
+ strcpy(netdev->name, "wwan%d");
+
+ dev = netdev_priv(netdev);
+ dev->udev = udev;
+ dev->net = netdev;
+ dev->intf = intf;
+
+ /* Set up endpoints */
+ hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM);
+ if (hintf == NULL) {
+ retval = -ENODEV;
+ err("Unable to find alternate settings interface");
+ goto err_endpoints;
+ }
+
+ for (i = 0; i < hintf->desc.bNumEndpoints; i++) {
+ endp = &hintf->endpoint[i].desc;
+ if (usb_endpoint_is_bulk_in(endp))
+ dev->bulk_in = endp->bEndpointAddress;
+ else if (usb_endpoint_is_bulk_out(endp))
+ dev->bulk_out = endp->bEndpointAddress;
+ }
+ if (!(dev->bulk_in && dev->bulk_out)) {
+ retval = -ENODEV;
+ err("Unable to find endpoints");
+ goto err_endpoints;
+ }
+
+ dev->ctrl_buf = kmalloc(IPHETH_CTRL_BUF_SIZE, GFP_KERNEL);
+ if (dev->ctrl_buf == NULL) {
+ retval = -ENOMEM;
+ goto err_alloc_ctrl_buf;
+ }
+
+ retval = ipheth_get_macaddr(dev);
+ if (retval)
+ goto err_get_macaddr;
+
+ INIT_DELAYED_WORK(&dev->carrier_work, ipheth_carrier_check_work);
+
+ retval = ipheth_alloc_urbs(dev);
+ if (retval) {
+ err("error allocating urbs: %d", retval);
+ goto err_alloc_urbs;
+ }
+
+ usb_set_intfdata(intf, dev);
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+ SET_ETHTOOL_OPS(netdev, &ops);
+ SET_NETDEV_DEVTYPE(netdev, &ipheth_type);
+
+ retval = register_netdev(netdev);
+ if (retval) {
+ err("error registering netdev: %d", retval);
+ retval = -EIO;
+ goto err_register_netdev;
+ }
+
+ dev_info(&intf->dev, "Apple iPhone USB Ethernet device attached\n");
+ return 0;
+
+err_register_netdev:
+ ipheth_free_urbs(dev);
+err_alloc_urbs:
+err_get_macaddr:
+err_alloc_ctrl_buf:
+ kfree(dev->ctrl_buf);
+err_endpoints:
+ free_netdev(netdev);
+ return retval;
+}
+
+static void ipheth_disconnect(struct usb_interface *intf)
+{
+ struct ipheth_device *dev;
+
+ dev = usb_get_intfdata(intf);
+ if (dev != NULL) {
+ unregister_netdev(dev->net);
+ ipheth_kill_urbs(dev);
+ ipheth_free_urbs(dev);
+ kfree(dev->ctrl_buf);
+ free_netdev(dev->net);
+ }
+ usb_set_intfdata(intf, NULL);
+ dev_info(&intf->dev, "Apple iPhone USB Ethernet now disconnected\n");
+}
+
+static struct usb_driver ipheth_driver = {
+ .name = "ipheth",
+ .probe = ipheth_probe,
+ .disconnect = ipheth_disconnect,
+ .id_table = ipheth_table,
+};
+
+static int __init ipheth_init(void)
+{
+ int retval;
+
+ retval = usb_register(&ipheth_driver);
+ if (retval) {
+ err("usb_register failed: %d", retval);
+ return retval;
+ }
+ return 0;
+}
+
+static void __exit ipheth_exit(void)
+{
+ usb_deregister(&ipheth_driver);
+}
+
+module_init(ipheth_init);
+module_exit(ipheth_exit);
+
+MODULE_AUTHOR("Diego Giagio <diego@giagio.com>");
+MODULE_DESCRIPTION("Apple iPhone USB Ethernet driver");
+MODULE_LICENSE("Dual BSD/GPL");
{ USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */
{ USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */
{ USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */
+ { USB_DEVICE(0x07c9, 0xb010) }, /* Allied Telesyn AT-USB10 USB Ethernet Adapter */
{ USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */
{ USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */
{ USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
--- /dev/null
+/*
+ * USB-to-WWAN Driver for Sierra Wireless modems
+ *
+ * Copyright (C) 2008, 2009, 2010 Paxton Smith, Matthew Safar, Rory Filer
+ * <linux@sierrawireless.com>
+ *
+ * Portions of this based on the cdc_ether driver by David Brownell (2003-2005)
+ * and Ole Andre Vadla Ravnas (ActiveSync) (2006).
+ *
+ * IMPORTANT DISCLAIMER: This driver is not commercially supported by
+ * Sierra Wireless. Use at your own risk.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define DRIVER_VERSION "v.2.0"
+#define DRIVER_AUTHOR "Paxton Smith, Matthew Safar, Rory Filer"
+#define DRIVER_DESC "USB-to-WWAN Driver for Sierra Wireless modems"
+static const char driver_name[] = "sierra_net";
+
+/* if defined debug messages enabled */
+/*#define DEBUG*/
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <net/ip.h>
+#include <net/udp.h>
+#include <asm/unaligned.h>
+#include <linux/usb/usbnet.h>
+
+#define SWI_USB_REQUEST_GET_FW_ATTR 0x06
+#define SWI_GET_FW_ATTR_MASK 0x08
+
+/* atomic counter partially included in MAC address to make sure 2 devices
+ * do not end up with the same MAC - concept breaks in case of > 255 ifaces
+ */
+static atomic_t iface_counter = ATOMIC_INIT(0);
+
+/*
+ * SYNC Timer Delay definition used to set the expiry time
+ */
+#define SIERRA_NET_SYNCDELAY (2*HZ)
+
+/* Max. MTU supported. The modem buffers are limited to 1500 */
+#define SIERRA_NET_MAX_SUPPORTED_MTU 1500
+
+/* The SIERRA_NET_USBCTL_BUF_LEN defines a buffer size allocated for control
+ * message reception ... and thus the max. received packet.
+ * (May be the cause for parse_hip returning -EINVAL)
+ */
+#define SIERRA_NET_USBCTL_BUF_LEN 1024
+
+/* list of interface numbers - used for constructing interface lists */
+struct sierra_net_iface_info {
+ const u32 infolen; /* number of interface numbers on list */
+ const u8 *ifaceinfo; /* pointer to the array holding the numbers */
+};
+
+struct sierra_net_info_data {
+ u16 rx_urb_size;
+ struct sierra_net_iface_info whitelist;
+};
+
+/* Private data structure */
+struct sierra_net_data {
+
+ u8 ethr_hdr_tmpl[ETH_HLEN]; /* ethernet header template for rx'd pkts */
+
+ u16 link_up; /* air link up or down */
+ u8 tx_hdr_template[4]; /* part of HIP hdr for tx'd packets */
+
+ u8 sync_msg[4]; /* SYNC message */
+ u8 shdwn_msg[4]; /* Shutdown message */
+
+ /* Backpointer to the container */
+ struct usbnet *usbnet;
+
+ u8 ifnum; /* interface number */
+
+/* Bit masks, must be a power of 2 */
+#define SIERRA_NET_EVENT_RESP_AVAIL 0x01
+#define SIERRA_NET_TIMER_EXPIRY 0x02
+ unsigned long kevent_flags;
+ struct work_struct sierra_net_kevent;
+ struct timer_list sync_timer; /* For retrying SYNC sequence */
+};
+
+struct param {
+ int is_present;
+ union {
+ void *ptr;
+ u32 dword;
+ u16 word;
+ u8 byte;
+ };
+};
+
+/* HIP message type */
+#define SIERRA_NET_HIP_EXTENDEDID 0x7F
+#define SIERRA_NET_HIP_HSYNC_ID 0x60 /* Modem -> host */
+#define SIERRA_NET_HIP_RESTART_ID 0x62 /* Modem -> host */
+#define SIERRA_NET_HIP_MSYNC_ID 0x20 /* Host -> modem */
+#define SIERRA_NET_HIP_SHUTD_ID 0x26 /* Host -> modem */
+
+#define SIERRA_NET_HIP_EXT_IP_IN_ID 0x0202
+#define SIERRA_NET_HIP_EXT_IP_OUT_ID 0x0002
+
+/* 3G UMTS Link Sense Indication definitions */
+#define SIERRA_NET_HIP_LSI_UMTSID 0x78
+
+/* Reverse Channel Grant Indication HIP message */
+#define SIERRA_NET_HIP_RCGI 0x64
+
+/* LSI Protocol types */
+#define SIERRA_NET_PROTOCOL_UMTS 0x01
+/* LSI Coverage */
+#define SIERRA_NET_COVERAGE_NONE 0x00
+#define SIERRA_NET_COVERAGE_NOPACKET 0x01
+
+/* LSI Session */
+#define SIERRA_NET_SESSION_IDLE 0x00
+/* LSI Link types */
+#define SIERRA_NET_AS_LINK_TYPE_IPv4 0x00
+
+struct lsi_umts {
+ u8 protocol;
+ u8 unused1;
+ __be16 length;
+ /* eventually use a union for the rest - assume umts for now */
+ u8 coverage;
+ u8 unused2[41];
+ u8 session_state;
+ u8 unused3[33];
+ u8 link_type;
+ u8 pdp_addr_len; /* NW-supplied PDP address len */
+ u8 pdp_addr[16]; /* NW-supplied PDP address (bigendian)) */
+ u8 unused4[23];
+ u8 dns1_addr_len; /* NW-supplied 1st DNS address len (bigendian) */
+ u8 dns1_addr[16]; /* NW-supplied 1st DNS address */
+ u8 dns2_addr_len; /* NW-supplied 2nd DNS address len */
+ u8 dns2_addr[16]; /* NW-supplied 2nd DNS address (bigendian)*/
+ u8 wins1_addr_len; /* NW-supplied 1st Wins address len */
+ u8 wins1_addr[16]; /* NW-supplied 1st Wins address (bigendian)*/
+ u8 wins2_addr_len; /* NW-supplied 2nd Wins address len */
+ u8 wins2_addr[16]; /* NW-supplied 2nd Wins address (bigendian) */
+ u8 unused5[4];
+ u8 gw_addr_len; /* NW-supplied GW address len */
+ u8 gw_addr[16]; /* NW-supplied GW address (bigendian) */
+ u8 reserved[8];
+} __attribute__ ((packed));
+
+#define SIERRA_NET_LSI_COMMON_LEN 4
+#define SIERRA_NET_LSI_UMTS_LEN (sizeof(struct lsi_umts))
+#define SIERRA_NET_LSI_UMTS_STATUS_LEN \
+ (SIERRA_NET_LSI_UMTS_LEN - SIERRA_NET_LSI_COMMON_LEN)
+
+/* Forward definitions */
+static void sierra_sync_timer(unsigned long syncdata);
+static int sierra_net_change_mtu(struct net_device *net, int new_mtu);
+
+/* Our own net device operations structure */
+static const struct net_device_ops sierra_net_device_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = sierra_net_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* get private data associated with passed in usbnet device */
+static inline struct sierra_net_data *sierra_net_get_private(struct usbnet *dev)
+{
+ return (struct sierra_net_data *)dev->data[0];
+}
+
+/* set private data associated with passed in usbnet device */
+static inline void sierra_net_set_private(struct usbnet *dev,
+ struct sierra_net_data *priv)
+{
+ dev->data[0] = (unsigned long)priv;
+}
+
+/* is packet IPv4 */
+static inline int is_ip(struct sk_buff *skb)
+{
+ return (skb->protocol == cpu_to_be16(ETH_P_IP));
+}
+
+/*
+ * check passed in packet and make sure that:
+ * - it is linear (no scatter/gather)
+ * - it is ethernet (mac_header properly set)
+ */
+static int check_ethip_packet(struct sk_buff *skb, struct usbnet *dev)
+{
+ skb_reset_mac_header(skb); /* ethernet header */
+
+ if (skb_is_nonlinear(skb)) {
+ netdev_err(dev->net, "Non linear buffer-dropping\n");
+ return 0;
+ }
+
+ if (!pskb_may_pull(skb, ETH_HLEN))
+ return 0;
+ skb->protocol = eth_hdr(skb)->h_proto;
+
+ return 1;
+}
+
+static const u8 *save16bit(struct param *p, const u8 *datap)
+{
+ p->is_present = 1;
+ p->word = get_unaligned_be16(datap);
+ return datap + sizeof(p->word);
+}
+
+static const u8 *save8bit(struct param *p, const u8 *datap)
+{
+ p->is_present = 1;
+ p->byte = *datap;
+ return datap + sizeof(p->byte);
+}
+
+/*----------------------------------------------------------------------------*
+ * BEGIN HIP *
+ *----------------------------------------------------------------------------*/
+/* HIP header */
+#define SIERRA_NET_HIP_HDR_LEN 4
+/* Extended HIP header */
+#define SIERRA_NET_HIP_EXT_HDR_LEN 6
+
+struct hip_hdr {
+ int hdrlen;
+ struct param payload_len;
+ struct param msgid;
+ struct param msgspecific;
+ struct param extmsgid;
+};
+
+static int parse_hip(const u8 *buf, const u32 buflen, struct hip_hdr *hh)
+{
+ const u8 *curp = buf;
+ int padded;
+
+ if (buflen < SIERRA_NET_HIP_HDR_LEN)
+ return -EPROTO;
+
+ curp = save16bit(&hh->payload_len, curp);
+ curp = save8bit(&hh->msgid, curp);
+ curp = save8bit(&hh->msgspecific, curp);
+
+ padded = hh->msgid.byte & 0x80;
+ hh->msgid.byte &= 0x7F; /* 7 bits */
+
+ hh->extmsgid.is_present = (hh->msgid.byte == SIERRA_NET_HIP_EXTENDEDID);
+ if (hh->extmsgid.is_present) {
+ if (buflen < SIERRA_NET_HIP_EXT_HDR_LEN)
+ return -EPROTO;
+
+ hh->payload_len.word &= 0x3FFF; /* 14 bits */
+
+ curp = save16bit(&hh->extmsgid, curp);
+ hh->extmsgid.word &= 0x03FF; /* 10 bits */
+
+ hh->hdrlen = SIERRA_NET_HIP_EXT_HDR_LEN;
+ } else {
+ hh->payload_len.word &= 0x07FF; /* 11 bits */
+ hh->hdrlen = SIERRA_NET_HIP_HDR_LEN;
+ }
+
+ if (padded) {
+ hh->hdrlen++;
+ hh->payload_len.word--;
+ }
+
+ /* if real packet shorter than the claimed length */
+ if (buflen < (hh->hdrlen + hh->payload_len.word))
+ return -EINVAL;
+
+ return 0;
+}
+
+static void build_hip(u8 *buf, const u16 payloadlen,
+ struct sierra_net_data *priv)
+{
+ /* the following doesn't have the full functionality. We
+ * currently build only one kind of header, so it is faster this way
+ */
+ put_unaligned_be16(payloadlen, buf);
+ memcpy(buf+2, priv->tx_hdr_template, sizeof(priv->tx_hdr_template));
+}
+/*----------------------------------------------------------------------------*
+ * END HIP *
+ *----------------------------------------------------------------------------*/
+
+static int sierra_net_send_cmd(struct usbnet *dev,
+ u8 *cmd, int cmdlen, const char * cmd_name)
+{
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+ int status;
+
+ status = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SEND_ENCAPSULATED_COMMAND,
+ USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE, 0,
+ priv->ifnum, cmd, cmdlen, USB_CTRL_SET_TIMEOUT);
+
+ if (status != cmdlen && status != -ENODEV)
+ netdev_err(dev->net, "Submit %s failed %d\n", cmd_name, status);
+
+ return status;
+}
+
+static int sierra_net_send_sync(struct usbnet *dev)
+{
+ int status;
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+
+ status = sierra_net_send_cmd(dev, priv->sync_msg,
+ sizeof(priv->sync_msg), "SYNC");
+
+ return status;
+}
+
+static void sierra_net_set_ctx_index(struct sierra_net_data *priv, u8 ctx_ix)
+{
+ dev_dbg(&(priv->usbnet->udev->dev), "%s %d", __func__, ctx_ix);
+ priv->tx_hdr_template[0] = 0x3F;
+ priv->tx_hdr_template[1] = ctx_ix;
+ *((u16 *)&priv->tx_hdr_template[2]) =
+ cpu_to_be16(SIERRA_NET_HIP_EXT_IP_OUT_ID);
+}
+
+static inline int sierra_net_is_valid_addrlen(u8 len)
+{
+ return (len == sizeof(struct in_addr));
+}
+
+static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen)
+{
+ struct lsi_umts *lsi = (struct lsi_umts *)data;
+
+ if (datalen < sizeof(struct lsi_umts)) {
+ netdev_err(dev->net, "%s: Data length %d, exp %Zu\n",
+ __func__, datalen,
+ sizeof(struct lsi_umts));
+ return -1;
+ }
+
+ if (lsi->length != cpu_to_be16(SIERRA_NET_LSI_UMTS_STATUS_LEN)) {
+ netdev_err(dev->net, "%s: LSI_UMTS_STATUS_LEN %d, exp %u\n",
+ __func__, be16_to_cpu(lsi->length),
+ (u32)SIERRA_NET_LSI_UMTS_STATUS_LEN);
+ return -1;
+ }
+
+ /* Validate the protocol - only support UMTS for now */
+ if (lsi->protocol != SIERRA_NET_PROTOCOL_UMTS) {
+ netdev_err(dev->net, "Protocol unsupported, 0x%02x\n",
+ lsi->protocol);
+ return -1;
+ }
+
+ /* Validate the link type */
+ if (lsi->link_type != SIERRA_NET_AS_LINK_TYPE_IPv4) {
+ netdev_err(dev->net, "Link type unsupported: 0x%02x\n",
+ lsi->link_type);
+ return -1;
+ }
+
+ /* Validate the coverage */
+ if (lsi->coverage == SIERRA_NET_COVERAGE_NONE
+ || lsi->coverage == SIERRA_NET_COVERAGE_NOPACKET) {
+ netdev_err(dev->net, "No coverage, 0x%02x\n", lsi->coverage);
+ return 0;
+ }
+
+ /* Validate the session state */
+ if (lsi->session_state == SIERRA_NET_SESSION_IDLE) {
+ netdev_err(dev->net, "Session idle, 0x%02x\n",
+ lsi->session_state);
+ return 0;
+ }
+
+ /* Set link_sense true */
+ return 1;
+}
+
+static void sierra_net_handle_lsi(struct usbnet *dev, char *data,
+ struct hip_hdr *hh)
+{
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+ int link_up;
+
+ link_up = sierra_net_parse_lsi(dev, data + hh->hdrlen,
+ hh->payload_len.word);
+ if (link_up < 0) {
+ netdev_err(dev->net, "Invalid LSI\n");
+ return;
+ }
+ if (link_up) {
+ sierra_net_set_ctx_index(priv, hh->msgspecific.byte);
+ priv->link_up = 1;
+ netif_carrier_on(dev->net);
+ } else {
+ priv->link_up = 0;
+ netif_carrier_off(dev->net);
+ }
+}
+
+static void sierra_net_dosync(struct usbnet *dev)
+{
+ int status;
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+
+ /* tell modem we are ready */
+ status = sierra_net_send_sync(dev);
+ if (status < 0)
+ netdev_err(dev->net,
+ "Send SYNC failed, status %d\n", status);
+ status = sierra_net_send_sync(dev);
+ if (status < 0)
+ netdev_err(dev->net,
+ "Send SYNC failed, status %d\n", status);
+
+ /* Now, start a timer and make sure we get the Restart Indication */
+ priv->sync_timer.function = sierra_sync_timer;
+ priv->sync_timer.data = (unsigned long) dev;
+ priv->sync_timer.expires = jiffies + SIERRA_NET_SYNCDELAY;
+ add_timer(&priv->sync_timer);
+}
+
+static void sierra_net_kevent(struct work_struct *work)
+{
+ struct sierra_net_data *priv =
+ container_of(work, struct sierra_net_data, sierra_net_kevent);
+ struct usbnet *dev = priv->usbnet;
+ int len;
+ int err;
+ u8 *buf;
+ u8 ifnum;
+
+ if (test_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags)) {
+ clear_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags);
+
+ /* Query the modem for the LSI message */
+ buf = kzalloc(SIERRA_NET_USBCTL_BUF_LEN, GFP_KERNEL);
+ if (!buf) {
+ netdev_err(dev->net,
+ "failed to allocate buf for LS msg\n");
+ return;
+ }
+ ifnum = priv->ifnum;
+ len = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ USB_CDC_GET_ENCAPSULATED_RESPONSE,
+ USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE,
+ 0, ifnum, buf, SIERRA_NET_USBCTL_BUF_LEN,
+ USB_CTRL_SET_TIMEOUT);
+
+ if (len < 0) {
+ netdev_err(dev->net,
+ "usb_control_msg failed, status %d\n", len);
+ } else {
+ struct hip_hdr hh;
+
+ dev_dbg(&dev->udev->dev, "%s: Received status message,"
+ " %04x bytes", __func__, len);
+
+ err = parse_hip(buf, len, &hh);
+ if (err) {
+ netdev_err(dev->net, "%s: Bad packet,"
+ " parse result %d\n", __func__, err);
+ kfree(buf);
+ return;
+ }
+
+ /* Validate packet length */
+ if (len != hh.hdrlen + hh.payload_len.word) {
+ netdev_err(dev->net, "%s: Bad packet, received"
+ " %d, expected %d\n", __func__, len,
+ hh.hdrlen + hh.payload_len.word);
+ kfree(buf);
+ return;
+ }
+
+ /* Switch on received message types */
+ switch (hh.msgid.byte) {
+ case SIERRA_NET_HIP_LSI_UMTSID:
+ dev_dbg(&dev->udev->dev, "LSI for ctx:%d",
+ hh.msgspecific.byte);
+ sierra_net_handle_lsi(dev, buf, &hh);
+ break;
+ case SIERRA_NET_HIP_RESTART_ID:
+ dev_dbg(&dev->udev->dev, "Restart reported: %d,"
+ " stopping sync timer",
+ hh.msgspecific.byte);
+ /* Got sync resp - stop timer & clear mask */
+ del_timer_sync(&priv->sync_timer);
+ clear_bit(SIERRA_NET_TIMER_EXPIRY,
+ &priv->kevent_flags);
+ break;
+ case SIERRA_NET_HIP_HSYNC_ID:
+ dev_dbg(&dev->udev->dev, "SYNC received");
+ err = sierra_net_send_sync(dev);
+ if (err < 0)
+ netdev_err(dev->net,
+ "Send SYNC failed %d\n", err);
+ break;
+ case SIERRA_NET_HIP_EXTENDEDID:
+ netdev_err(dev->net, "Unrecognized HIP msg, "
+ "extmsgid 0x%04x\n", hh.extmsgid.word);
+ break;
+ case SIERRA_NET_HIP_RCGI:
+ /* Ignored */
+ break;
+ default:
+ netdev_err(dev->net, "Unrecognized HIP msg, "
+ "msgid 0x%02x\n", hh.msgid.byte);
+ break;
+ }
+ }
+ kfree(buf);
+ }
+ /* The sync timer bit might be set */
+ if (test_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags)) {
+ clear_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags);
+ dev_dbg(&dev->udev->dev, "Deferred sync timer expiry");
+ sierra_net_dosync(priv->usbnet);
+ }
+
+ if (priv->kevent_flags)
+ dev_dbg(&dev->udev->dev, "sierra_net_kevent done, "
+ "kevent_flags = 0x%lx", priv->kevent_flags);
+}
+
+static void sierra_net_defer_kevent(struct usbnet *dev, int work)
+{
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+ set_bit(work, &priv->kevent_flags);
+ schedule_work(&priv->sierra_net_kevent);
+}
+
+/*
+ * Sync Retransmit Timer Handler. On expiry, kick the work queue
+ */
+void sierra_sync_timer(unsigned long syncdata)
+{
+ struct usbnet *dev = (struct usbnet *)syncdata;
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+ /* Kick the tasklet */
+ sierra_net_defer_kevent(dev, SIERRA_NET_TIMER_EXPIRY);
+}
+
+static void sierra_net_status(struct usbnet *dev, struct urb *urb)
+{
+ struct usb_cdc_notification *event;
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+
+ if (urb->actual_length < sizeof *event)
+ return;
+
+ /* Add cases to handle other standard notifications. */
+ event = urb->transfer_buffer;
+ switch (event->bNotificationType) {
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+ case USB_CDC_NOTIFY_SPEED_CHANGE:
+ /* USB 305 sends those */
+ break;
+ case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+ sierra_net_defer_kevent(dev, SIERRA_NET_EVENT_RESP_AVAIL);
+ break;
+ default:
+ netdev_err(dev->net, ": unexpected notification %02x!\n",
+ event->bNotificationType);
+ break;
+ }
+}
+
+static void sierra_net_get_drvinfo(struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ strncpy(info->driver, driver_name, sizeof info->driver);
+ strncpy(info->version, DRIVER_VERSION, sizeof info->version);
+}
+
+static u32 sierra_net_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ /* Report link is down whenever the interface is down */
+ return sierra_net_get_private(dev)->link_up && netif_running(net);
+}
+
+static struct ethtool_ops sierra_net_ethtool_ops = {
+ .get_drvinfo = sierra_net_get_drvinfo,
+ .get_link = sierra_net_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+/* MTU can not be more than 1500 bytes, enforce it. */
+static int sierra_net_change_mtu(struct net_device *net, int new_mtu)
+{
+ if (new_mtu > SIERRA_NET_MAX_SUPPORTED_MTU)
+ return -EINVAL;
+
+ return usbnet_change_mtu(net, new_mtu);
+}
+
+static int is_whitelisted(const u8 ifnum,
+ const struct sierra_net_iface_info *whitelist)
+{
+ if (whitelist) {
+ const u8 *list = whitelist->ifaceinfo;
+ int i;
+
+ for (i = 0; i < whitelist->infolen; i++) {
+ if (list[i] == ifnum)
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap)
+{
+ int result = 0;
+ u16 *attrdata;
+
+ attrdata = kmalloc(sizeof(*attrdata), GFP_KERNEL);
+ if (!attrdata)
+ return -ENOMEM;
+
+ result = usb_control_msg(
+ dev->udev,
+ usb_rcvctrlpipe(dev->udev, 0),
+ /* _u8 vendor specific request */
+ SWI_USB_REQUEST_GET_FW_ATTR,
+ USB_DIR_IN | USB_TYPE_VENDOR, /* __u8 request type */
+ 0x0000, /* __u16 value not used */
+ 0x0000, /* __u16 index not used */
+ attrdata, /* char *data */
+ sizeof(*attrdata), /* __u16 size */
+ USB_CTRL_SET_TIMEOUT); /* int timeout */
+
+ if (result < 0) {
+ kfree(attrdata);
+ return -EIO;
+ }
+
+ *datap = *attrdata;
+
+ kfree(attrdata);
+ return result;
+}
+
+/*
+ * collects the bulk endpoints, the status endpoint.
+ */
+static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ u8 ifacenum;
+ u8 numendpoints;
+ u16 fwattr = 0;
+ int status;
+ struct ethhdr *eth;
+ struct sierra_net_data *priv;
+ static const u8 sync_tmplate[sizeof(priv->sync_msg)] = {
+ 0x00, 0x00, SIERRA_NET_HIP_MSYNC_ID, 0x00};
+ static const u8 shdwn_tmplate[sizeof(priv->shdwn_msg)] = {
+ 0x00, 0x00, SIERRA_NET_HIP_SHUTD_ID, 0x00};
+
+ struct sierra_net_info_data *data =
+ (struct sierra_net_info_data *)dev->driver_info->data;
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+
+ ifacenum = intf->cur_altsetting->desc.bInterfaceNumber;
+ /* We only accept certain interfaces */
+ if (!is_whitelisted(ifacenum, &data->whitelist)) {
+ dev_dbg(&dev->udev->dev, "Ignoring interface: %d", ifacenum);
+ return -ENODEV;
+ }
+ numendpoints = intf->cur_altsetting->desc.bNumEndpoints;
+ /* We have three endpoints, bulk in and out, and a status */
+ if (numendpoints != 3) {
+ dev_err(&dev->udev->dev, "Expected 3 endpoints, found: %d",
+ numendpoints);
+ return -ENODEV;
+ }
+ /* Status endpoint set in usbnet_get_endpoints() */
+ dev->status = NULL;
+ status = usbnet_get_endpoints(dev, intf);
+ if (status < 0) {
+ dev_err(&dev->udev->dev, "Error in usbnet_get_endpoints (%d)",
+ status);
+ return -ENODEV;
+ }
+ /* Initialize sierra private data */
+ priv = kzalloc(sizeof *priv, GFP_KERNEL);
+ if (!priv) {
+ dev_err(&dev->udev->dev, "No memory");
+ return -ENOMEM;
+ }
+
+ priv->usbnet = dev;
+ priv->ifnum = ifacenum;
+ dev->net->netdev_ops = &sierra_net_device_ops;
+
+ /* change MAC addr to include, ifacenum, and to be unique */
+ dev->net->dev_addr[ETH_ALEN-2] = atomic_inc_return(&iface_counter);
+ dev->net->dev_addr[ETH_ALEN-1] = ifacenum;
+
+ /* we will have to manufacture ethernet headers, prepare template */
+ eth = (struct ethhdr *)priv->ethr_hdr_tmpl;
+ memcpy(ð->h_dest, dev->net->dev_addr, ETH_ALEN);
+ eth->h_proto = cpu_to_be16(ETH_P_IP);
+
+ /* prepare shutdown message template */
+ memcpy(priv->shdwn_msg, shdwn_tmplate, sizeof(priv->shdwn_msg));
+ /* set context index initially to 0 - prepares tx hdr template */
+ sierra_net_set_ctx_index(priv, 0);
+
+ /* decrease the rx_urb_size and max_tx_size to 4k on USB 1.1 */
+ dev->rx_urb_size = data->rx_urb_size;
+ if (dev->udev->speed != USB_SPEED_HIGH)
+ dev->rx_urb_size = min_t(size_t, 4096, data->rx_urb_size);
+
+ dev->net->hard_header_len += SIERRA_NET_HIP_EXT_HDR_LEN;
+ dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+ /* Set up the netdev */
+ dev->net->flags |= IFF_NOARP;
+ dev->net->ethtool_ops = &sierra_net_ethtool_ops;
+ netif_carrier_off(dev->net);
+
+ sierra_net_set_private(dev, priv);
+
+ priv->kevent_flags = 0;
+
+ /* Use the shared workqueue */
+ INIT_WORK(&priv->sierra_net_kevent, sierra_net_kevent);
+
+ /* Only need to do this once */
+ init_timer(&priv->sync_timer);
+
+ /* verify fw attributes */
+ status = sierra_net_get_fw_attr(dev, &fwattr);
+ dev_dbg(&dev->udev->dev, "Fw attr: %x\n", fwattr);
+
+ /* test whether firmware supports DHCP */
+ if (!(status == sizeof(fwattr) && (fwattr & SWI_GET_FW_ATTR_MASK))) {
+ /* found incompatible firmware version */
+ dev_err(&dev->udev->dev, "Incompatible driver and firmware"
+ " versions\n");
+ kfree(priv);
+ return -ENODEV;
+ }
+ /* prepare sync message from template */
+ memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
+
+ /* initiate the sync sequence */
+ sierra_net_dosync(dev);
+
+ return 0;
+}
+
+static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status;
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+
+ /* Kill the timer then flush the work queue */
+ del_timer_sync(&priv->sync_timer);
+
+ flush_scheduled_work();
+
+ /* tell modem we are going away */
+ status = sierra_net_send_cmd(dev, priv->shdwn_msg,
+ sizeof(priv->shdwn_msg), "Shutdown");
+ if (status < 0)
+ netdev_err(dev->net,
+ "usb_control_msg failed, status %d\n", status);
+
+ sierra_net_set_private(dev, NULL);
+
+ kfree(priv);
+}
+
+static struct sk_buff *sierra_net_skb_clone(struct usbnet *dev,
+ struct sk_buff *skb, int len)
+{
+ struct sk_buff *new_skb;
+
+ /* clone skb */
+ new_skb = skb_clone(skb, GFP_ATOMIC);
+
+ /* remove len bytes from original */
+ skb_pull(skb, len);
+
+ /* trim next packet to it's length */
+ if (new_skb) {
+ skb_trim(new_skb, len);
+ } else {
+ if (netif_msg_rx_err(dev))
+ netdev_err(dev->net, "failed to get skb\n");
+ dev->net->stats.rx_dropped++;
+ }
+
+ return new_skb;
+}
+
+/* ---------------------------- Receive data path ----------------------*/
+static int sierra_net_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ int err;
+ struct hip_hdr hh;
+ struct sk_buff *new_skb;
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+
+ /* could contain multiple packets */
+ while (likely(skb->len)) {
+ err = parse_hip(skb->data, skb->len, &hh);
+ if (err) {
+ if (netif_msg_rx_err(dev))
+ netdev_err(dev->net, "Invalid HIP header %d\n",
+ err);
+ /* dev->net->stats.rx_errors incremented by caller */
+ dev->net->stats.rx_length_errors++;
+ return 0;
+ }
+
+ /* Validate Extended HIP header */
+ if (!hh.extmsgid.is_present
+ || hh.extmsgid.word != SIERRA_NET_HIP_EXT_IP_IN_ID) {
+ if (netif_msg_rx_err(dev))
+ netdev_err(dev->net, "HIP/ETH: Invalid pkt\n");
+
+ dev->net->stats.rx_frame_errors++;
+ /* dev->net->stats.rx_errors incremented by caller */;
+ return 0;
+ }
+
+ skb_pull(skb, hh.hdrlen);
+
+ /* We are going to accept this packet, prepare it */
+ memcpy(skb->data, sierra_net_get_private(dev)->ethr_hdr_tmpl,
+ ETH_HLEN);
+
+ /* Last packet in batch handled by usbnet */
+ if (hh.payload_len.word == skb->len)
+ return 1;
+
+ new_skb = sierra_net_skb_clone(dev, skb, hh.payload_len.word);
+ if (new_skb)
+ usbnet_skb_return(dev, new_skb);
+
+ } /* while */
+
+ return 0;
+}
+
+/* ---------------------------- Transmit data path ----------------------*/
+struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ struct sierra_net_data *priv = sierra_net_get_private(dev);
+ u16 len;
+ bool need_tail;
+
+ dev_dbg(&dev->udev->dev, "%s", __func__);
+ if (priv->link_up && check_ethip_packet(skb, dev) && is_ip(skb)) {
+ /* enough head room as is? */
+ if (SIERRA_NET_HIP_EXT_HDR_LEN <= skb_headroom(skb)) {
+ /* Save the Eth/IP length and set up HIP hdr */
+ len = skb->len;
+ skb_push(skb, SIERRA_NET_HIP_EXT_HDR_LEN);
+ /* Handle ZLP issue */
+ need_tail = ((len + SIERRA_NET_HIP_EXT_HDR_LEN)
+ % dev->maxpacket == 0);
+ if (need_tail) {
+ if (unlikely(skb_tailroom(skb) == 0)) {
+ netdev_err(dev->net, "tx_fixup:"
+ "no room for packet\n");
+ dev_kfree_skb_any(skb);
+ return NULL;
+ } else {
+ skb->data[skb->len] = 0;
+ __skb_put(skb, 1);
+ len = len + 1;
+ }
+ }
+ build_hip(skb->data, len, priv);
+ return skb;
+ } else {
+ /*
+ * compensate in the future if necessary
+ */
+ netdev_err(dev->net, "tx_fixup: no room for HIP\n");
+ } /* headroom */
+ }
+
+ if (!priv->link_up)
+ dev->net->stats.tx_carrier_errors++;
+
+ /* tx_dropped incremented by usbnet */
+
+ /* filter the packet out, release it */
+ dev_kfree_skb_any(skb);
+ return NULL;
+}
+
+static const u8 sierra_net_ifnum_list[] = { 7, 10, 11 };
+static const struct sierra_net_info_data sierra_net_info_data_68A3 = {
+ .rx_urb_size = 8 * 1024,
+ .whitelist = {
+ .infolen = ARRAY_SIZE(sierra_net_ifnum_list),
+ .ifaceinfo = sierra_net_ifnum_list
+ }
+};
+
+static const struct driver_info sierra_net_info_68A3 = {
+ .description = "Sierra Wireless USB-to-WWAN Modem",
+ .flags = FLAG_WWAN | FLAG_SEND_ZLP,
+ .bind = sierra_net_bind,
+ .unbind = sierra_net_unbind,
+ .status = sierra_net_status,
+ .rx_fixup = sierra_net_rx_fixup,
+ .tx_fixup = sierra_net_tx_fixup,
+ .data = (unsigned long)&sierra_net_info_data_68A3,
+};
+
+static const struct usb_device_id products[] = {
+ {USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
+ .driver_info = (unsigned long) &sierra_net_info_68A3},
+
+ {}, /* last item */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+/* We are based on usbnet, so let it handle the USB driver specifics */
+static struct usb_driver sierra_net_driver = {
+ .name = "sierra_net",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .no_dynamic_id = 1,
+};
+
+static int __init sierra_net_init(void)
+{
+ BUILD_BUG_ON(FIELD_SIZEOF(struct usbnet, data)
+ < sizeof(struct cdc_state));
+
+ return usb_register(&sierra_net_driver);
+}
+
+static void __exit sierra_net_exit(void)
+{
+ usb_deregister(&sierra_net_driver);
+}
+
+module_exit(sierra_net_exit);
+module_init(sierra_net_init);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
#include "smsc75xx.h"
#define SMSC_CHIPNAME "smsc75xx"
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
#include "smsc95xx.h"
#define SMSC_CHIPNAME "smsc95xx"
}
if (csum) {
- u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
- skb_push(skb, 4);
- memcpy(skb->data, &csum_preamble, 4);
+ if (skb->len <= 45) {
+ /* workaround - hardware tx checksum does not work
+ * properly with extremely small packets */
+ long csstart = skb->csum_start - skb_headroom(skb);
+ __wsum calc = csum_partial(skb->data + csstart,
+ skb->len - csstart, 0);
+ *((__sum16 *)(skb->data + csstart
+ + skb->csum_offset)) = csum_fold(calc);
+
+ csum = false;
+ } else {
+ u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
+ skb_push(skb, 4);
+ memcpy(skb->data, &csum_preamble, 4);
+ }
}
skb_push(skb, 4);
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
#define DRIVER_VERSION "22-Aug-2005"
*/
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
case FLOW_CNTL_TX_RX:
MII_REG_BITS_ON(ANAR_PAUSE, MII_REG_ANAR, vptr->mac_regs);
- MII_REG_BITS_ON(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
+ MII_REG_BITS_OFF(ANAR_ASMDIR, MII_REG_ANAR, vptr->mac_regs);
break;
case FLOW_CNTL_DISABLE:
#include <linux/virtio_net.h>
#include <linux/scatterlist.h>
#include <linux/if_vlan.h>
+#include <linux/slab.h>
static int napi_weight = 128;
module_param(napi_weight, int, 0444);
struct scatterlist sg[2];
int err;
+ sg_init_table(sg, 2);
skb = netdev_alloc_skb_ip_align(vi->dev, MAX_PACKET_LEN);
if (unlikely(!skb))
return -ENOMEM;
char *p;
int i, err, offset;
+ sg_init_table(sg, MAX_SKB_FRAGS + 2);
/* page in sg[MAX_SKB_FRAGS + 1] is list tail */
for (i = MAX_SKB_FRAGS + 1; i > 1; --i) {
first = get_a_page(vi, gfp);
#include <linux/etherdevice.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
+#include <linux/slab.h>
#include "vxge-traffic.h"
#include "vxge-config.h"
#ifndef VXGE_CONFIG_H
#define VXGE_CONFIG_H
#include <linux/list.h>
+#include <linux/slab.h>
#ifndef VXGE_CACHE_LINE_SIZE
#define VXGE_CACHE_LINE_SIZE 128
* Copyright(c) 2002-2009 Neterion Inc.
******************************************************************************/
#include<linux/ethtool.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/etherdevice.h>
#include <linux/if_vlan.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/tcp.h>
#include <net/ip.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/cache.h>
#include <linux/version.h>
#include <linux/pci.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/if.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/types.h>
#include <asm/io.h>
#include <linux/poll.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#undef DEBUG_HARD_HEADER
ppp_cp_event(dev, PID_LCP, STOP, 0, 0, 0, NULL);
}
+static void ppp_close(struct net_device *dev)
+{
+ ppp_tx_flush();
+}
+
static struct hdlc_proto proto = {
.start = ppp_start,
.stop = ppp_stop,
+ .close = ppp_close,
.type_trans = ppp_type_trans,
.ioctl = ppp_ioctl,
.netif_rx = ppp_rx,
#include <linux/poll.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
static int raw_ioctl(struct net_device *dev, struct ifreq *ifr);
#include <linux/errno.h>
#include <linux/etherdevice.h>
+#include <linux/gfp.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
#include <linux/inetdevice.h>
#include <linux/poll.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
static int raw_eth_ioctl(struct net_device *dev, struct ifreq *ifr);
*/
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/hdlc.h>
#include <linux/if_arp.h>
#include <linux/inetdevice.h>
#include <linux/poll.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <net/x25device.h>
static int x25_ioctl(struct net_device *dev, struct ifreq *ifr);
#include <linux/delay.h>
#include <linux/hdlc.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <asm/irq.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <mach/npe.h>
#include <mach/qmgr.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/net.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/spinlock.h>
#include <linux/if.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <asm/io.h>
#include <linux/fcntl.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/hdlc.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <asm/irq.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/compat.h>
+#include <linux/slab.h>
#include "x25_asy.h"
#include <net/x25device.h>
#include <linux/hdlc.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <asm/dma.h>
#include <asm/io.h>
#define RT_LOCK
#include <stdarg.h>
#include "i2400m.h"
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/wimax/i2400m.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/suspend.h>
+#include <linux/slab.h>
#define D_SUBMODULE driver
#include "debug-levels.h"
*/
#include <linux/firmware.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "i2400m.h"
* alloc_netdev.
*/
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include "i2400m.h"
*/
#include "i2400m.h"
#include <linux/wimax/i2400m.h>
+#include <linux/slab.h>
* i2400m_msg_size_check
* wimax_msg
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
#include "i2400m-sdio.h"
#define D_SUBMODULE rx
* __i2400ms_send_barker()
*/
+#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/sdio.h>
* (FIFO empty).
*/
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include "i2400m.h"
* i2400m_notif_submit
*/
#include <linux/usb.h>
+#include <linux/gfp.h>
#include "i2400m-usb.h"
* i2400mu_rx_kick()
*/
#include <linux/usb.h>
+#include <linux/slab.h>
#include "i2400m-usb.h"
* i2400mu_rx_release() called from i2400mu_bus_dev_stop()
*/
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "i2400m-usb.h"
#include "i2400m-usb.h"
#include <linux/wimax/i2400m.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#define D_SUBMODULE usb
#include <linux/init.h>
#include <linux/if.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/etherdevice.h>
#include <linux/pci.h>
#include <linux/delay.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/etherdevice.h>
#include <net/mac80211.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
{ USB_DEVICE(0x04bb, 0x093f) },
/* AVM FRITZ!WLAN USB Stick N */
{ USB_DEVICE(0x057C, 0x8401) },
+ /* NEC WL300NU-G */
+ { USB_DEVICE(0x0409, 0x0249) },
/* AVM FRITZ!WLAN USB Stick N 2.4 */
{ USB_DEVICE(0x057C, 0x8402), .driver_info = AR9170_REQ_FW1_ONLY },
spin_unlock_irqrestore(&aru->common.cmdlock, flags);
usb_fill_int_urb(urb, aru->udev,
- usb_sndbulkpipe(aru->udev, AR9170_EP_CMD),
+ usb_sndintpipe(aru->udev, AR9170_EP_CMD),
aru->common.cmdbuf, plen + 4,
ar9170_usb_tx_urb_complete, NULL, 1);
\*************************************/
#include <linux/pci.h>
+#include <linux/slab.h>
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
#include <linux/pci.h>
#include <linux/ethtool.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <net/ieee80211_radiotap.h>
* EEPROM access functions and helpers *
\*************************************/
+#include <linux/slab.h>
+
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
#define _ATH5K_PHY
#include <linux/delay.h>
+#include <linux/slab.h>
#include "ath5k.h"
#include "reg.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ath9k.h"
*/
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "hw.h"
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "ath9k.h"
static char *dev_info = "ath9k";
all_wiphys_idle = ath9k_all_wiphys_idle(sc);
ath9k_set_wiphy_idle(aphy, idle);
- if (!idle && all_wiphys_idle)
- enable_radio = true;
+ enable_radio = (!idle && all_wiphys_idle);
/*
* After we unlock here its possible another wiphy
* AR9287 - 11n single-band 1x1 MIMO for USB
*/
+#include <linux/slab.h>
+
#include "hw.h"
/**
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "ath9k.h"
static const struct ath_rate_table ar5416_11na_ratetable = {
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/slab.h>
+
#include "ath9k.h"
struct ath9k_vif_iter_data {
return htype;
}
-static bool is_pae(struct sk_buff *skb)
-{
- struct ieee80211_hdr *hdr;
- __le16 fc;
-
- hdr = (struct ieee80211_hdr *)skb->data;
- fc = hdr->frame_control;
-
- if (ieee80211_is_data(fc)) {
- if (ieee80211_is_nullfunc(fc) ||
- /* Port Access Entity (IEEE 802.1X) */
- (skb->protocol == cpu_to_be16(ETH_P_PAE))) {
- return true;
- }
- }
-
- return false;
-}
-
static int get_hw_crypto_keytype(struct sk_buff *skb)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
goto tx_done;
}
- if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
+ if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
/*
* Try aggregation if it's a unicast data frame
* and the destination is HT capable.
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include "regd.h"
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <asm/div64.h>
#include <linux/delay.h>
#include <linux/sched.h>
+#include <linux/slab.h>
static struct b43_lo_calib *b43_find_lo_calib(struct b43_txpower_lo_control *lo,
#include <linux/skbuff.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "b43.h"
#include "pcmcia.h"
#include <linux/ssb/ssb.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
*/
+#include <linux/slab.h>
+
#include "b43.h"
#include "phy_a.h"
#include "phy_common.h"
#include "main.h"
#include <linux/bitrev.h>
+#include <linux/slab.h>
static const s8 b43_tssi2dbm_g_table[] = {
*/
+#include <linux/slab.h>
+
#include "b43.h"
#include "main.h"
#include "phy_lp.h"
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include "b43.h"
#include <linux/delay.h>
#include <linux/sched.h>
+#include <linux/slab.h>
static u16 generate_cookie(struct b43_pio_txqueue *q,
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
+#include <linux/slab.h>
#include <linux/ssb/ssb.h>
#include "sdio.h"
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/dst.h>
/* 32bit DMA ops. */
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <net/dst.h>
#include <asm/unaligned.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include "b43legacy.h"
#include "xmit.h"
#include <linux/delay.h>
+#include <linux/slab.h>
static void tx_start(struct b43legacy_pioqueue *queue)
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <net/lib80211.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
+
#include "hostap_80211.h"
#include "hostap_common.h"
#include "hostap_wlan.h"
#include <linux/delay.h>
#include <linux/random.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include "hostap_wlan.h"
#include "hostap.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/if.h>
+#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "hostap_wlan.h"
#include "hostap.h"
#include "hostap_ap.h"
/* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/ethtool.h>
#include <linux/if.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <linux/if.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
******************************************************************************/
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ipw2200.h"
#include <linux/netdevice.h>
#include <linux/proc_fs.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/tcp.h>
#include <linux/types.h>
#include <linux/wireless.h>
#include <linux/errno.h>
#include <linux/if_arp.h>
#include <linux/in6.h>
+#include <linux/gfp.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/proc_fs.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/tcp.h>
#include <linux/types.h>
#include <linux/wireless.h>
******************************************************************************/
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim scd_ssn "
"%d index %d\n", scd_ssn , index);
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
- iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+ if (qc)
+ iwl_free_tfds_in_queue(priv, sta_id,
+ tid, freed);
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark) &&
freed = iwl_tx_queue_reclaim(priv, txq_id, index);
if (qc && likely(sta_id != IWL_INVALID_STATION))
- priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
+ iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
+ else if (sta_id == IWL_INVALID_STATION)
+ IWL_DEBUG_TX_REPLY(priv, "Station not known\n");
if (priv->mac80211_registered &&
(iwl_queue_space(&txq->q) > txq->q.low_mark))
iwl_wake_queue(priv, txq_id);
}
-
if (qc && likely(sta_id != IWL_INVALID_STATION))
iwl_txq_check_empty(priv, sta_id, tid, txq_id);
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
- EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
- EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
!!(rate_n_flags & RATE_MCS_ANT_C_MSK);
}
+/*
+ * Static function to get the expected throughput from an iwl_scale_tbl_info
+ * that wraps a NULL pointer check
+ */
+static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
+{
+ if (tbl->expected_tpt)
+ return tbl->expected_tpt[rs_index];
+ return 0;
+}
+
/**
* rs_collect_tx_data - Update the success/failure sliding window
*
* at this rate. window->data contains the bitmask of successful
* packets.
*/
-static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
- int scale_index, s32 tpt, int attempts,
- int successes)
+static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl,
+ int scale_index, int attempts, int successes)
{
struct iwl_rate_scale_data *window = NULL;
static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1));
- s32 fail_count;
+ s32 fail_count, tpt;
if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
return -EINVAL;
/* Select window for current tx bit rate */
- window = &(windows[scale_index]);
+ window = &(tbl->win[scale_index]);
+
+ /* Get expected throughput */
+ tpt = get_expected_tpt(tbl, scale_index);
/*
* Keep track of only the latest 62 tx frame attempts in this rate's
return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
(a->is_SGI == b->is_SGI);
}
-/*
- * Static function to get the expected throughput from an iwl_scale_tbl_info
- * that wraps a NULL pointer check
- */
-static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
-{
- if (tbl->expected_tpt)
- return tbl->expected_tpt[rs_index];
- return 0;
-}
/*
* mac80211 sends us Tx status
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct iwl_priv *priv = (struct iwl_priv *)priv_r;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct iwl_rate_scale_data *window = NULL;
enum mac80211_rate_control_flags mac_flags;
u32 tx_rate;
struct iwl_scale_tbl_info tbl_type;
- struct iwl_scale_tbl_info *curr_tbl, *other_tbl;
- s32 tpt = 0;
+ struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl;
IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
return;
}
- window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
/*
* Updating the frame history depends on whether packets were
tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
&rs_index);
- tpt = get_expected_tpt(curr_tbl, rs_index);
- rs_collect_tx_data(window, rs_index, tpt,
+ rs_collect_tx_data(curr_tbl, rs_index,
info->status.ampdu_ack_len,
info->status.ampdu_ack_map);
* table as active/search.
*/
if (table_type_matches(&tbl_type, curr_tbl))
- tpt = get_expected_tpt(curr_tbl, rs_index);
+ tmp_tbl = curr_tbl;
else if (table_type_matches(&tbl_type, other_tbl))
- tpt = get_expected_tpt(other_tbl, rs_index);
+ tmp_tbl = other_tbl;
else
continue;
-
- /* Constants mean 1 transmission, 0 successes */
- if (i < retries)
- rs_collect_tx_data(window, rs_index, tpt, 1,
- 0);
- else
- rs_collect_tx_data(window, rs_index, tpt, 1,
- legacy_success);
+ rs_collect_tx_data(tmp_tbl, rs_index, 1,
+ i < retries ? 0 : legacy_success);
}
/* Update success/fail counts if not searching for new mode */
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
/* Ack/clear/reset pending uCode interrupts.
* Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
*/
- iwl_write32(priv, CSR_INT, priv->inta);
+ /* There is a hardware bug in the interrupt mask function that some
+ * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
+ * they are disabled in the CSR_INT_MASK register. Furthermore the
+ * ICT interrupt handling mechanism has another bug that might cause
+ * these unmasked interrupts fail to be detected. We workaround the
+ * hardware bugs here by ACKing all the possible interrupts so that
+ * interrupt coalescing can still be achieved.
+ */
+ iwl_write32(priv, CSR_INT, priv->inta | ~priv->inta_mask);
inta = priv->inta;
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS;
/*
cancel_delayed_work_sync(&priv->init_alive_start);
cancel_delayed_work(&priv->scan_check);
+ cancel_work_sync(&priv->start_internal_scan);
cancel_delayed_work(&priv->alive_start);
cancel_work_sync(&priv->beacon_update);
del_timer_sync(&priv->statistics_periodic);
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "iwl-dev.h"
}
}
+ /*
+ * The above algorithm sometimes fails when the ucode
+ * reports 0 for all chains. It's not clear why that
+ * happens to start with, but it is then causing trouble
+ * because this can make us enable more chains than the
+ * hardware really has.
+ *
+ * To be safe, simply mask out any chains that we know
+ * are not on the device.
+ */
+ active_chains &= priv->hw_params.valid_rx_ant;
+
num_tx_chains = 0;
for (i = 0; i < NUM_RX_CHAINS; i++) {
/* loops on all the bits of
#include <linux/module.h>
#include <linux/etherdevice.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
spin_unlock_irqrestore(&priv->lock, flags);
- /* Allocate and init all Tx and Command queues */
- ret = iwl_txq_ctx_reset(priv);
- if (ret)
- return ret;
+ /* Allocate or reset and init all Tx and Command queues */
+ if (!priv->txq) {
+ ret = iwl_txq_ctx_alloc(priv);
+ if (ret)
+ return ret;
+ } else
+ iwl_txq_ctx_reset(priv);
set_bit(STATUS_INIT, &priv->status);
*/
IWL_DEBUG_INFO(priv, "perform radio reset.\n");
iwl_internal_short_hw_scan(priv);
- return;
}
/*****************************************************
* TX
******************************************************/
-int iwl_txq_ctx_reset(struct iwl_priv *priv);
+int iwl_txq_ctx_alloc(struct iwl_priv *priv);
+void iwl_txq_ctx_reset(struct iwl_priv *priv);
void iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq);
int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
struct iwl_tx_queue *txq,
void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
int slots_num, u32 txq_id);
+void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
+ int slots_num, u32 txq_id);
void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn);
int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid);
int iwl_scan_cancel(struct iwl_priv *priv);
int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
-int iwl_internal_short_hw_scan(struct iwl_priv *priv);
+void iwl_internal_short_hw_scan(struct iwl_priv *priv);
int iwl_force_reset(struct iwl_priv *priv, int mode);
u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
const u8 *ie, int ie_len, int left);
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/debugfs.h>
struct work_struct tt_work;
struct work_struct ct_enter;
struct work_struct ct_exit;
+ struct work_struct start_internal_scan;
struct tasklet_struct irq_tasklet;
/* sparse doesn't like tracepoint macros */
#ifndef __CHECKER__
+#include "iwl-dev.h"
+
#define CREATE_TRACE_POINTS
#include "iwl-devtrace.h"
#define __IWLWIFI_DEVICE_TRACE
#include <linux/tracepoint.h>
-#include "iwl-dev.h"
#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING) || defined(__CHECKER__)
#undef TRACE_EVENT
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
#define EEPROM_5000_REG_BAND_52_HT40_CHANNELS ((0x92)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */
+/* 6000 regulatory - indirect access */
+#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\
+ | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
+
/* 6000 and up regulatory tx power - indirect access */
/* max. elements per section */
#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8)
#include <linux/io.h>
+#include "iwl-dev.h"
#include "iwl-debug.h"
#include "iwl-devtrace.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
*****************************************************************************/
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*****************************************************************************/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/etherdevice.h>
#include <net/mac80211.h>
static int iwl_scan_initiate(struct iwl_priv *priv)
{
+ WARN_ON(!mutex_is_locked(&priv->mutex));
+
IWL_DEBUG_INFO(priv, "Starting scan...\n");
set_bit(STATUS_SCANNING, &priv->status);
priv->is_internal_short_scan = false;
* internal short scan, this function should only been called while associated.
* It will reset and tune the radio to prevent possible RF related problem
*/
-int iwl_internal_short_hw_scan(struct iwl_priv *priv)
+void iwl_internal_short_hw_scan(struct iwl_priv *priv)
{
- int ret = 0;
+ queue_work(priv->workqueue, &priv->start_internal_scan);
+}
+
+static void iwl_bg_start_internal_scan(struct work_struct *work)
+{
+ struct iwl_priv *priv =
+ container_of(work, struct iwl_priv, start_internal_scan);
+
+ mutex_lock(&priv->mutex);
if (!iwl_is_ready_rf(priv)) {
- ret = -EIO;
IWL_DEBUG_SCAN(priv, "not ready or exit pending\n");
- goto out;
+ goto unlock;
}
+
if (test_bit(STATUS_SCANNING, &priv->status)) {
IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
- ret = -EAGAIN;
- goto out;
+ goto unlock;
}
+
if (test_bit(STATUS_SCAN_ABORTING, &priv->status)) {
IWL_DEBUG_SCAN(priv, "Scan request while abort pending\n");
- ret = -EAGAIN;
- goto out;
+ goto unlock;
}
priv->scan_bands = 0;
set_bit(STATUS_SCANNING, &priv->status);
priv->is_internal_short_scan = true;
queue_work(priv->workqueue, &priv->request_scan);
-
-out:
- return ret;
+ unlock:
+ mutex_unlock(&priv->mutex);
}
EXPORT_SYMBOL(iwl_internal_short_hw_scan);
INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
INIT_WORK(&priv->request_scan, iwl_bg_request_scan);
INIT_WORK(&priv->abort_scan, iwl_bg_abort_scan);
+ INIT_WORK(&priv->start_internal_scan, iwl_bg_start_internal_scan);
INIT_DELAYED_WORK(&priv->scan_check, iwl_bg_scan_check);
}
EXPORT_SYMBOL(iwl_setup_scan_deferred_work);
#include <linux/etherdevice.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
else {
- IWL_ERR(priv, "free more than tfds_in_queue (%u:%d)\n",
+ IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n",
priv->stations[sta_id].tid[tid].tfds_in_queue,
freed);
priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
struct iwl_queue *q = &txq->q;
struct device *dev = &priv->pci_dev->dev;
int i;
+ bool huge = false;
if (q->n_bd == 0)
return;
+ for (; q->read_ptr != q->write_ptr;
+ q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+ /* we have no way to tell if it is a huge cmd ATM */
+ i = get_cmd_index(q, q->read_ptr, 0);
+
+ if (txq->meta[i].flags & CMD_SIZE_HUGE) {
+ huge = true;
+ continue;
+ }
+
+ pci_unmap_single(priv->pci_dev,
+ pci_unmap_addr(&txq->meta[i], mapping),
+ pci_unmap_len(&txq->meta[i], len),
+ PCI_DMA_BIDIRECTIONAL);
+ }
+ if (huge) {
+ i = q->n_window;
+ pci_unmap_single(priv->pci_dev,
+ pci_unmap_addr(&txq->meta[i], mapping),
+ pci_unmap_len(&txq->meta[i], len),
+ PCI_DMA_BIDIRECTIONAL);
+ }
+
/* De-alloc array of command/tx buffers */
for (i = 0; i <= TFD_CMD_SLOTS; i++)
kfree(txq->cmd[i]);
}
EXPORT_SYMBOL(iwl_tx_queue_init);
+void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
+ int slots_num, u32 txq_id)
+{
+ int actual_slots = slots_num;
+
+ if (txq_id == IWL_CMD_QUEUE_NUM)
+ actual_slots++;
+
+ memset(txq->meta, 0, sizeof(struct iwl_cmd_meta) * actual_slots);
+
+ txq->need_update = 0;
+
+ /* Initialize queue's high/low-water marks, and head/tail indexes */
+ iwl_queue_init(priv, &txq->q, TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+
+ /* Tell device where to find queue */
+ priv->cfg->ops->lib->txq_init(priv, txq);
+}
+EXPORT_SYMBOL(iwl_tx_queue_reset);
+
/**
* iwl_hw_txq_ctx_free - Free TXQ Context
*
/* Tx queues */
if (priv->txq) {
- for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
- txq_id++)
+ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
if (txq_id == IWL_CMD_QUEUE_NUM)
iwl_cmd_queue_free(priv);
else
EXPORT_SYMBOL(iwl_hw_txq_ctx_free);
/**
- * iwl_txq_ctx_reset - Reset TX queue context
- * Destroys all DMA structures and initialize them again
+ * iwl_txq_ctx_alloc - allocate TX queue context
+ * Allocate all Tx DMA structures and initialize them
*
* @param priv
* @return error code
*/
-int iwl_txq_ctx_reset(struct iwl_priv *priv)
+int iwl_txq_ctx_alloc(struct iwl_priv *priv)
{
- int ret = 0;
+ int ret;
int txq_id, slots_num;
unsigned long flags;
return ret;
}
+void iwl_txq_ctx_reset(struct iwl_priv *priv)
+{
+ int txq_id, slots_num;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Turn off all Tx DMA fifos */
+ priv->cfg->ops->lib->txq_set_sched(priv, 0);
+
+ /* Tell NIC where to find the "keep warm" buffer */
+ iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG, priv->kw.dma >> 4);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* Alloc and init all Tx queues, including the command queue (#4) */
+ for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
+ slots_num = txq_id == IWL_CMD_QUEUE_NUM ?
+ TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
+ iwl_tx_queue_reset(priv, &priv->txq[txq_id], slots_num, txq_id);
+ }
+}
+
/**
- * iwl_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory
+ * iwl_txq_ctx_stop - Stop all Tx DMA channels
*/
void iwl_txq_ctx_stop(struct iwl_priv *priv)
{
1000);
}
spin_unlock_irqrestore(&priv->lock, flags);
-
- /* Deallocate memory for all Tx queues */
- iwl_hw_txq_ctx_free(priv);
}
EXPORT_SYMBOL(iwl_txq_ctx_stop);
spin_lock_irqsave(&priv->hcmd_lock, flags);
+ /* If this is a huge cmd, mark the huge flag also on the meta.flags
+ * of the _original_ cmd. This is used for DMA mapping clean up.
+ */
+ if (cmd->flags & CMD_SIZE_HUGE) {
+ idx = get_cmd_index(q, q->write_ptr, 0);
+ txq->meta[idx].flags = CMD_SIZE_HUGE;
+ }
+
idx = get_cmd_index(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
out_cmd = txq->cmd[idx];
out_meta = &txq->meta[idx];
bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
struct iwl_device_cmd *cmd;
struct iwl_cmd_meta *meta;
+ struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
/* If a Tx command is being handled and it isn't in the actual
* command queue then there a command routing bug has been introduced
return;
}
- cmd_index = get_cmd_index(&priv->txq[IWL_CMD_QUEUE_NUM].q, index, huge);
- cmd = priv->txq[IWL_CMD_QUEUE_NUM].cmd[cmd_index];
- meta = &priv->txq[IWL_CMD_QUEUE_NUM].meta[cmd_index];
+ /* If this is a huge cmd, clear the huge flag on the meta.flags
+ * of the _original_ cmd. So that iwl_cmd_queue_free won't unmap
+ * the DMA buffer for the scan (huge) command.
+ */
+ if (huge) {
+ cmd_index = get_cmd_index(&txq->q, index, 0);
+ txq->meta[cmd_index].flags = 0;
+ }
+ cmd_index = get_cmd_index(&txq->q, index, huge);
+ cmd = txq->cmd[cmd_index];
+ meta = &txq->meta[cmd_index];
pci_unmap_single(priv->pci_dev,
pci_unmap_addr(meta, mapping),
get_cmd_string(cmd->hdr.cmd));
wake_up_interruptible(&priv->wait_command_queue);
}
+ meta->flags = 0;
}
EXPORT_SYMBOL(iwl_tx_cmd_complete);
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
{
int i;
- for (i = 0; i < IWL_RATE_COUNT; i++) {
+ for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) {
rates[i].bitrate = iwl3945_rates[i].ieee * 5;
rates[i].hw_value = i; /* Rate scaling will work on indexes */
rates[i].hw_value_short = i;
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC);
- hw->wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY |
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
WIPHY_FLAG_DISABLE_BEACON_HINTS;
hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
#include <linux/etherdevice.h>
#include <linux/wireless.h>
#include <linux/ieee80211.h>
+#include <linux/slab.h>
#include <net/cfg80211.h>
#include "iwm.h"
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "iwm.h"
#include "bus.h"
*
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/debugfs.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "iwm.h"
#include "umac.h"
*/
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include "iwm.h"
#include "bus.h"
#include <linux/sched.h>
#include <linux/ieee80211.h>
#include <linux/wireless.h>
+#include <linux/slab.h>
#include "iwm.h"
#include "debug.h"
* -> sdio_disable_func()
*/
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include "iwm.h"
#include "commands.h"
#include <linux/ieee80211.h>
#include <linux/if_arp.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
#include "iwm.h"
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/debugfs.h>
#include <linux/mmc/sdio_ids.h>
* (i.e. half of the max size). [iwm_tx_worker]
*/
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/ieee80211.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <net/lib80211.h>
#include "assoc.h"
*
*/
+#include <linux/slab.h>
#include <net/cfg80211.h>
#include "cfg.h"
if (ret < 0)
lbs_pr_err("cannot register wiphy device\n");
+ priv->wiphy_registered = true;
+
ret = register_netdev(priv->dev);
if (ret)
lbs_pr_err("cannot register network device\n");
if (!wdev)
return;
- if (wdev->wiphy) {
+ if (priv->wiphy_registered)
wiphy_unregister(wdev->wiphy);
+
+ if (wdev->wiphy)
wiphy_free(wdev->wiphy);
- }
+
kfree(wdev);
}
#include <linux/kfifo.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "host.h"
#include "decl.h"
* This file contains the handling of command
* responses as well as events generated by firmware.
*/
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/if_arp.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
#include <net/lib80211.h>
/* CFG80211 */
struct wireless_dev *wdev;
+ bool wiphy_registered;
/* Mesh */
struct net_device *mesh_dev; /* Virtual device */
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/semaphore.h>
+#include <linux/slab.h>
#include <linux/spi/libertas_spi.h>
#include <linux/spi/spi.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#ifdef CONFIG_OLPC
#include <linux/kfifo.h>
#include <linux/stddef.h>
#include <linux/ieee80211.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
* This file contains the handling of RX in wlan driver.
*/
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include "host.h"
* IOCTL handlers as well as command preperation and response routines
* for sending scan commands to the firmware.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/etherdevice.h>
* This file contains ioctl functions
*/
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/if.h>
#include <linux/if_arp.h>
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
+#include <linux/slab.h>
+
#include "libertas_tf.h"
static const struct channel_range channel_ranges[] = {
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#define DRV_NAME "lbtf_usb"
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
+#include <linux/slab.h>
+
#include "libertas_tf.h"
#include "linux/etherdevice.h"
*/
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <net/dst.h>
#include <net/xfrm.h>
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
MODULE_FIRMWARE("mwl8k/fmimage_8366.fw");
static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
+ { PCI_VDEVICE(MARVELL, 0x2a0a), .driver_data = MWL8363, },
{ PCI_VDEVICE(MARVELL, 0x2a0c), .driver_data = MWL8363, },
{ PCI_VDEVICE(MARVELL, 0x2a24), .driver_data = MWL8363, },
{ PCI_VDEVICE(MARVELL, 0x2a2b), .driver_data = MWL8687, },
* See copyright notice in main.c
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/device.h>
* See copyright notice in main.c
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ieee80211.h>
*
* See copyright notice in main.c
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/sort.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
u32 idx, i;
i = (*index) % ring_limit;
- (*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
+ (*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]);
idx %= ring_limit;
while (i != idx) {
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include "p54spi.h"
#include "p54spi_eeprom.h"
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
static struct usb_device_id p54u_table[] __devinitdata = {
/* Version 1 devices (pci chip + net2280) */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
+ {USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
{USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */
{USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <asm/uaccess.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/system.h>
#include <linux/wireless.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
/*
* Function definitions
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "prismcompat.h"
#include "islpci_dev.h"
#include <linux/proc_fs.h>
#include <linux/ptrace.h>
#include <linux/seq_file.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/if_arp.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
#include <linux/usb/usbnet.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00pci.h"
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/eeprom_93cx6.h>
+#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00pci.h"
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "rt2x00.h"
char *tx_power;
unsigned int i;
+ /*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
/*
* Initialize all hw fields.
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "rt2x00.h"
#if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE)
rt2800_rfcsr_write(rt2x00dev, 24,
rt2x00dev->calibration[conf_is_ht40(conf)]);
- rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2800_rfcsr_read(rt2x00dev, 7, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
- rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+ rt2800_rfcsr_write(rt2x00dev, 7, rfcsr);
}
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include "rt2x00.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00pci.h"
Abstract: rt2x00 queue specific routines.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00soc.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/eeprom_93cx6.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "rt2x00.h"
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
#include <linux/init.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/eeprom_93cx6.h>
#include "wl1251_acx.h"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/crc7.h>
#include "wl1251.h"
*/
#include <linux/gpio.h>
+#include <linux/slab.h>
#include "wl1251_reg.h"
#include "wl1251_boot.h"
#include "wl1251_cmd.h"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/crc7.h>
#include "wl1251.h"
#include "wl1251_debugfs.h"
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include "wl1251.h"
#include "wl1251_acx.h"
void wl1251_debugfs_reset(struct wl1251 *wl)
{
- memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+ if (wl->stats.fw_stats != NULL)
+ memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
wl->stats.retry_count = 0;
wl->stats.excessive_retries = 0;
}
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "wl1251_init.h"
#include "wl12xx_80211.h"
#include <linux/crc32.h>
#include <linux/etherdevice.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include "wl1251.h"
#include "wl12xx_80211.h"
*/
#include <linux/skbuff.h>
+#include <linux/gfp.h>
#include <net/mac80211.h>
#include "wl1251.h"
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/spi/wl12xx.h>
#include <linux/platform_device.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include "wl1271.h"
#include "wl12xx_80211.h"
*/
#include <linux/gpio.h>
+#include <linux/slab.h>
#include "wl1271_acx.h"
#include "wl1271_reg.h"
#include <linux/crc7.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include "wl1271.h"
#include "wl1271_reg.h"
#include "wl1271_debugfs.h"
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include "wl1271.h"
#include "wl1271_acx.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "wl1271_init.h"
#include "wl12xx_80211.h"
#include <linux/vmalloc.h>
#include <linux/spi/wl12xx.h>
#include <linux/inetdevice.h>
+#include <linux/slab.h>
#include "wl1271.h"
#include "wl12xx_80211.h"
*
*/
+#include <linux/gfp.h>
+
#include "wl1271.h"
#include "wl1271_acx.h"
#include "wl1271_reg.h"
#include <linux/platform_device.h>
#include <linux/crc7.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include "wl1271.h"
#include "wl12xx_80211.h"
*/
#include "wl1271_testmode.h"
+#include <linux/slab.h>
#include <net/genetlink.h>
#include "wl1271.h"
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include "zd_def.h"
#include "zd_chip.h"
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/jiffies.h>
#include <net/ieee80211_radiotap.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "zd_rf.h"
#include "zd_usb.h"
#include <linux/firmware.h>
#include <linux/device.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <linux/udp.h>
#include <linux/moduleparam.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <xen/xen.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
+#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <linux/timer.h>
#include <linux/errno.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/page.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
struct device_node *allnodes;
if (!np->type)
np->type = "<NULL>";
}
- while (tag == OF_DT_BEGIN_NODE) {
- mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+ while (tag == OF_DT_BEGIN_NODE || tag == OF_DT_NOP) {
+ if (tag == OF_DT_NOP)
+ *p += 4;
+ else
+ mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
tag = be32_to_cpup((__be32 *)(*p));
}
if (tag != OF_DT_END_NODE) {
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <linux/of_gpio.h>
#include <asm/prom.h>
}
phy = get_phy_device(mdio, be32_to_cpup(addr));
- if (!phy) {
+ if (!phy || IS_ERR(phy)) {
dev_err(&mdio->dev, "error probing PHY at address %i\n",
*addr);
continue;
#include <linux/fs.h>
#include <linux/oprofile.h>
#include <linux/sched.h>
+#include <linux/gfp.h>
#include "oprofile_stats.h"
#include "event_buffer.h"
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/led.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <asm/hardware.h>
#include <linux/module.h>
#include <linux/parport.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <asm/current.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/module.h>
#include <linux/parport.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/parport.h>
#include <linux/parport.h>
#include <linux/ctype.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
static const struct {
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/wait.h>
#include <linux/ioport.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include "pci.h"
#include <linux/interrupt.h>
#include <linux/tboot.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#define PREFIX "DMAR: "
#include <linux/pci_hotplug.h>
#include <linux/acpi.h>
#include <linux/pci-acpi.h>
+#include <linux/slab.h>
#define MY_NAME "acpi_pcihp"
#include <linux/pci_hotplug.h>
#include <linux/pci-acpi.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include "../pci.h"
#include "acpiphp.h"
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <acpi/acpi_bus.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include "../pci.h"
struct legacy_slot {
#include <linux/kobject.h>
#include <linux/sysfs.h>
#include <linux/pagemap.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
+#include <linux/slab.h>
#include "pciehp.h"
#define PCIEHP_DETECT_PCIE (0)
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "pciehp.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "../pci.h"
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/time.h>
+#include <linux/slab.h>
#include "../pci.h"
#include "pciehp.h"
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
if (!pci_resource_len(pdev, i))
continue;
- ctrl_info(ctrl, " PCI resource [%d] : 0x%llx@0x%llx\n",
- i, (unsigned long long)pci_resource_len(pdev, i),
- (unsigned long long)pci_resource_start(pdev, i));
+ ctrl_info(ctrl, " PCI resource [%d] : %pR\n",
+ i, &pdev->resource[i]);
}
ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
ctrl_info(ctrl, " Physical Slot Number : %d\n", PSN(ctrl));
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/string.h>
+#include <linux/vmalloc.h>
#include <asm/pci-bridge.h>
#include <linux/mutex.h>
rc = dlpar_remove_pci_slot(drc_name, dn);
break;
}
+ vm_unmap_aliases();
+
printk(KERN_INFO "%s: slot %s removed\n", DLPAR_MODULE_NAME, drc_name);
exit:
mutex_unlock(&rpadlpar_mutex);
#include <linux/moduleparam.h>
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
-#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/init.h>
+#include <linux/vmalloc.h>
#include <asm/eeh.h> /* for eeh_add_device() */
#include <asm/rtas.h> /* rtas_call */
#include <asm/pci-bridge.h> /* for pci_controller */
return -EINVAL;
pcibios_remove_pci_devices(slot->bus);
+ vm_unmap_aliases();
+
slot->state = NOT_CONFIGURED;
return 0;
}
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "shpchp.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "../pci.h"
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
-#include <linux/gfp.h>
#include <linux/htirq.h>
/* Global ht irq lock.
#include <linux/interrupt.h>
#include <linux/dmar.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/hpet.h>
#include <linux/pci.h>
#include <linux/pci.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
struct ioapic {
acpi_status status;
unsigned long long gsb;
struct ioapic *ioapic;
- u64 addr;
int ret;
char *type;
+ struct resource *res;
handle = DEVICE_ACPI_HANDLE(&dev->dev);
if (!handle)
if (pci_request_region(dev, 0, type))
goto exit_disable;
- addr = pci_resource_start(dev, 0);
- if (acpi_register_ioapic(ioapic->handle, addr, ioapic->gsi_base))
+ res = &dev->resource[0];
+ if (acpi_register_ioapic(ioapic->handle, res->start, ioapic->gsi_base))
goto exit_release;
pci_set_drvdata(dev, ioapic);
- dev_info(&dev->dev, "%s at %#llx, GSI %u\n", type, addr,
- ioapic->gsi_base);
+ dev_info(&dev->dev, "%s at %pR, GSI %u\n", type, res, ioapic->gsi_base);
return 0;
exit_release:
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include "pci.h"
#include "msi.h"
#include <linux/mm.h>
#include <linux/capability.h>
#include <linux/pci-aspm.h>
+#include <linux/slab.h>
#include "pci.h"
static int sysfs_initialized; /* = 0 */
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/pm.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/string.h>
*/
int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state)
{
- return state > PCI_D0 ?
+ return state >= PCI_D0 ?
pci_platform_power_transition(dev, state) : -EINVAL;
}
EXPORT_SYMBOL_GPL(__pci_complete_power_transition);
*/
return 0;
- /* Check if we're already there */
- if (dev->current_state == state)
- return 0;
-
__pci_start_power_transition(dev, state);
/* This device is quirked not to be put into D3, so
*/
int pcix_get_max_mmrbc(struct pci_dev *dev)
{
- int err, cap;
+ int cap;
u32 stat;
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!cap)
return -EINVAL;
- err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
- if (err)
+ if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
return -EINVAL;
- return (stat & PCI_X_STATUS_MAX_READ) >> 12;
+ return 512 << ((stat & PCI_X_STATUS_MAX_READ) >> 21);
}
EXPORT_SYMBOL(pcix_get_max_mmrbc);
*/
int pcix_get_mmrbc(struct pci_dev *dev)
{
- int ret, cap;
- u32 cmd;
+ int cap;
+ u16 cmd;
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!cap)
return -EINVAL;
- ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
- if (!ret)
- ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
+ if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
+ return -EINVAL;
- return ret;
+ return 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
}
EXPORT_SYMBOL(pcix_get_mmrbc);
*/
int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
{
- int cap, err = -EINVAL;
- u32 stat, cmd, v, o;
+ int cap;
+ u32 stat, v, o;
+ u16 cmd;
if (mmrbc < 512 || mmrbc > 4096 || !is_power_of_2(mmrbc))
- goto out;
+ return -EINVAL;
v = ffs(mmrbc) - 10;
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
if (!cap)
- goto out;
+ return -EINVAL;
- err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
- if (err)
- goto out;
+ if (pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat))
+ return -EINVAL;
if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
return -E2BIG;
- err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
- if (err)
- goto out;
+ if (pci_read_config_word(dev, cap + PCI_X_CMD, &cmd))
+ return -EINVAL;
o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
if (o != v) {
cmd &= ~PCI_X_CMD_MAX_READ;
cmd |= v << 2;
- err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd);
+ if (pci_write_config_word(dev, cap + PCI_X_CMD, cmd))
+ return -EIO;
}
-out:
- return err;
+ return 0;
}
EXPORT_SYMBOL(pcix_set_mmrbc);
EXPORT_SYMBOL(pci_disable_device);
EXPORT_SYMBOL(pci_find_capability);
EXPORT_SYMBOL(pci_bus_find_capability);
-EXPORT_SYMBOL(pci_register_set_vga_state);
EXPORT_SYMBOL(pci_release_regions);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_request_regions_exclusive);
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/stddef.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/pcieport_if.h>
+#include <linux/slab.h>
#include "aerdrv.h"
#include "../../pci.h"
/* Assert Secondary Bus Reset */
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &p2p_ctrl);
- p2p_ctrl |= PCI_CB_BRIDGE_CTL_CB_RESET;
+ p2p_ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
+ /*
+ * we should send hot reset message for 2ms to allow it time to
+ * propogate to all downstream ports
+ */
+ msleep(2);
+
/* De-assert Secondary Bus Reset */
- p2p_ctrl &= ~PCI_CB_BRIDGE_CTL_CB_RESET;
+ p2p_ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, p2p_ctrl);
/*
#include <linux/pm.h>
#include <linux/suspend.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "aerdrv.h"
static int forceload;
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
#include <linux/dmi.h>
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
} else {
dev_printk(KERN_DEBUG, &dev->dev,
- " bridge window [io %04lx - %04lx] reg reading\n",
+ " bridge window [io %#06lx-%#06lx] (disabled)\n",
base, limit);
}
}
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
} else {
dev_printk(KERN_DEBUG, &dev->dev,
- " bridge window [mem 0x%08lx - 0x%08lx] reg reading\n",
+ " bridge window [mem %#010lx-%#010lx] (disabled)\n",
base, limit + 0xfffff);
}
}
dev_printk(KERN_DEBUG, &dev->dev, " bridge window %pR\n", res);
} else {
dev_printk(KERN_DEBUG, &dev->dev,
- " bridge window [mem 0x%08lx - %08lx pref] reg reading\n",
+ " bridge window [mem %#010lx-%#010lx pref] (disabled)\n",
base, limit + 0xfffff);
}
}
int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
u32 buses, i, j = 0;
u16 bctl;
+ u8 primary, secondary, subordinate;
int broken = 0;
pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses);
+ primary = buses & 0xFF;
+ secondary = (buses >> 8) & 0xFF;
+ subordinate = (buses >> 16) & 0xFF;
- dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n",
- buses & 0xffffff, pass);
+ dev_dbg(&dev->dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n",
+ secondary, subordinate, pass);
/* Check if setup is sensible at all */
if (!pass &&
- ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) {
+ (primary != bus->number || secondary <= bus->number)) {
dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
broken = 1;
}
pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
- if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) {
- unsigned int cmax, busnr;
+ if ((secondary || subordinate) && !pcibios_assign_all_busses() &&
+ !is_cardbus && !broken) {
+ unsigned int cmax;
/*
* Bus already configured by firmware, process it in the first
* pass and just note the configuration.
*/
if (pass)
goto out;
- busnr = (buses >> 8) & 0xFF;
/*
* If we already got to this bus through a different bridge,
* However, we continue to descend down the hierarchy and
* scan remaining child buses.
*/
- child = pci_find_bus(pci_domain_nr(bus), busnr);
+ child = pci_find_bus(pci_domain_nr(bus), secondary);
if (!child) {
- child = pci_add_new_bus(bus, dev, busnr);
+ child = pci_add_new_bus(bus, dev, secondary);
if (!child)
goto out;
- child->primary = buses & 0xFF;
- child->subordinate = (buses >> 16) & 0xFF;
+ child->primary = primary;
+ child->subordinate = subordinate;
child->bridge_ctl = bctl;
}
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
bus_region.end = res->end;
pcibios_bus_to_resource(dev, res, &bus_region);
- pci_claim_resource(dev, nr);
- dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name);
+ if (pci_claim_resource(dev, nr) == 0)
+ dev_info(&dev->dev, "quirk: %pR claimed by %s\n",
+ res, name);
}
}
/*
* Disable PCI Bus Parking and PCI Master read caching on CX700
* which causes unspecified timing errors with a VT6212L on the PCI
- * bus leading to USB2.0 packet loss. The defaults are that these
- * features are turned off but some BIOSes turn them on.
+ * bus leading to USB2.0 packet loss.
+ *
+ * This quirk is only enabled if a second (on the external PCI bus)
+ * VT6212L is found -- the CX700 core itself also contains a USB
+ * host controller with the same PCI ID as the VT6212L.
*/
+ /* Count VT6212L instances */
+ struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_8235_USB_2, NULL);
uint8_t b;
+
+ /* p should contain the first (internal) VT6212L -- see if we have
+ an external one by searching again */
+ p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p);
+ if (!p)
+ return;
+ pci_dev_put(p);
+
if (pci_read_config_byte(dev, 0x76, &b) == 0) {
if (b & 0x40) {
/* Turn off PCI Bus Parking */
}
}
}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching);
/*
* For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9602, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK, 0x9602, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AI, 0x9602, quirk_disable_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi);
/* Go through the list of Hypertransport capabilities and
* return 1 if a HT MSI capability is found and enabled */
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include "pci.h"
int pci_claim_resource(struct pci_dev *dev, int resource)
{
struct resource *res = &dev->resource[resource];
- struct resource *root;
- int err;
+ struct resource *root, *conflict;
root = pci_find_parent_resource(dev, res);
if (!root) {
return -EINVAL;
}
- err = request_resource(root, res);
- if (err)
+ conflict = request_resource_conflict(root, res);
+ if (conflict) {
dev_err(&dev->dev,
- "address space collision: %pR already in use\n", res);
+ "address space collision: %pR conflicts with %s %pR\n",
+ res, conflict->name, conflict);
+ return -EBUSY;
+ }
- return err;
+ return 0;
}
EXPORT_SYMBOL(pci_claim_resource);
*/
#include <linux/kobject.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/err.h>
#include "pci.h"
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <pcmcia/ss.h>
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
struct at91_cf_data *board = cf->board;
- pcmcia_socket_dev_suspend(&pdev->dev);
if (device_may_wakeup(&pdev->dev)) {
enable_irq_wake(board->det_pin);
if (board->irq_pin)
disable_irq_wake(board->irq_pin);
}
- pcmcia_socket_dev_resume(&pdev->dev);
return 0;
}
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
return ret;
}
-static int au1x00_drv_pcmcia_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int au1x00_drv_pcmcia_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
-
static struct platform_driver au1x00_pcmcia_driver = {
.driver = {
.name = "au1x00-pcmcia",
},
.probe = au1x00_drv_pcmcia_probe,
.remove = au1x00_drv_pcmcia_remove,
- .suspend = au1x00_drv_pcmcia_suspend,
- .resume = au1x00_drv_pcmcia_resume,
};
#include <linux/ioport.h>
#include <linux/timer.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
return 0;
}
-static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return pcmcia_socket_dev_suspend(&pdev->dev);
-}
-
-static int bfin_cf_resume(struct platform_device *pdev)
-{
- return pcmcia_socket_dev_resume(&pdev->dev);
-}
-
static struct platform_driver bfin_cf_driver = {
.driver = {
.name = (char *)driver_name,
},
.probe = bfin_cf_probe,
.remove = __devexit_p(bfin_cf_remove),
- .suspend = bfin_cf_suspend,
- .resume = bfin_cf_resume,
};
static int __init bfin_cf_init(void)
if (!s)
return -EINVAL;
+ if (s->functions) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
/* We do not want to validate the CIS cache... */
mutex_lock(&s->ops_mutex);
destroy_cis_cache(s);
count = 0;
else {
struct pcmcia_socket *s;
- unsigned int chains;
+ unsigned int chains = 1;
if (off + count > size)
count = size - off;
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- if (pccard_validate_cis(s, &chains))
+ if (!s->functions && pccard_validate_cis(s, &chains))
return -EIO;
if (!chains)
return -ENODATA;
EXPORT_SYMBOL(pcmcia_socket_list_rwsem);
-/*
- * Low-level PCMCIA socket drivers need to register with the PCCard
- * core using pcmcia_register_socket.
- *
- * socket drivers are expected to use the following callbacks in their
- * .drv struct:
- * - pcmcia_socket_dev_suspend
- * - pcmcia_socket_dev_resume
- * These functions check for the appropriate struct pcmcia_soket arrays,
- * and pass them to the low-level functions pcmcia_{suspend,resume}_socket
- */
-static int socket_early_resume(struct pcmcia_socket *skt);
-static int socket_late_resume(struct pcmcia_socket *skt);
-static int socket_resume(struct pcmcia_socket *skt);
-static int socket_suspend(struct pcmcia_socket *skt);
-
-static void pcmcia_socket_dev_run(struct device *dev,
- int (*cb)(struct pcmcia_socket *))
-{
- struct pcmcia_socket *socket;
-
- down_read(&pcmcia_socket_list_rwsem);
- list_for_each_entry(socket, &pcmcia_socket_list, socket_list) {
- if (socket->dev.parent != dev)
- continue;
- mutex_lock(&socket->skt_mutex);
- cb(socket);
- mutex_unlock(&socket->skt_mutex);
- }
- up_read(&pcmcia_socket_list_rwsem);
-}
-
-int pcmcia_socket_dev_suspend(struct device *dev)
-{
- pcmcia_socket_dev_run(dev, socket_suspend);
- return 0;
-}
-EXPORT_SYMBOL(pcmcia_socket_dev_suspend);
-
-void pcmcia_socket_dev_early_resume(struct device *dev)
-{
- pcmcia_socket_dev_run(dev, socket_early_resume);
-}
-EXPORT_SYMBOL(pcmcia_socket_dev_early_resume);
-
-void pcmcia_socket_dev_late_resume(struct device *dev)
-{
- pcmcia_socket_dev_run(dev, socket_late_resume);
-}
-EXPORT_SYMBOL(pcmcia_socket_dev_late_resume);
-
-int pcmcia_socket_dev_resume(struct device *dev)
-{
- pcmcia_socket_dev_run(dev, socket_resume);
- return 0;
-}
-EXPORT_SYMBOL(pcmcia_socket_dev_resume);
-
-
struct pcmcia_socket *pcmcia_get_socket(struct pcmcia_socket *skt)
{
struct device *dev = get_device(&skt->dev);
static int socket_late_resume(struct pcmcia_socket *skt)
{
+ int ret;
+
mutex_lock(&skt->ops_mutex);
skt->state &= ~SOCKET_SUSPEND;
mutex_unlock(&skt->ops_mutex);
- if (!(skt->state & SOCKET_PRESENT))
- return socket_insert(skt);
+ if (!(skt->state & SOCKET_PRESENT)) {
+ ret = socket_insert(skt);
+ if (ret == -ENODEV)
+ ret = 0;
+ return ret;
+ }
if (skt->resume_status) {
socket_shutdown(skt);
socket_remove(skt);
if (sysfs_events & PCMCIA_UEVENT_INSERT)
socket_insert(skt);
- if ((sysfs_events & PCMCIA_UEVENT_RESUME) &&
- !(skt->state & SOCKET_CARDBUS)) {
- ret = socket_resume(skt);
- if (!ret && skt->callback)
- skt->callback->resume(skt);
- }
if ((sysfs_events & PCMCIA_UEVENT_SUSPEND) &&
!(skt->state & SOCKET_CARDBUS)) {
if (skt->callback)
ret = skt->callback->suspend(skt);
else
ret = 0;
- if (!ret)
+ if (!ret) {
socket_suspend(skt);
+ msleep(100);
+ }
+ }
+ if ((sysfs_events & PCMCIA_UEVENT_RESUME) &&
+ !(skt->state & SOCKET_CARDBUS)) {
+ ret = socket_resume(skt);
+ if (!ret && skt->callback)
+ skt->callback->resume(skt);
}
if ((sysfs_events & PCMCIA_UEVENT_REQUERY) &&
!(skt->state & SOCKET_CARDBUS)) {
}
+#ifdef CONFIG_PM
+
+static int __pcmcia_pm_op(struct device *dev,
+ int (*callback) (struct pcmcia_socket *skt))
+{
+ struct pcmcia_socket *s = container_of(dev, struct pcmcia_socket, dev);
+ int ret;
+
+ mutex_lock(&s->skt_mutex);
+ ret = callback(s);
+ mutex_unlock(&s->skt_mutex);
+
+ return ret;
+}
+
+static int pcmcia_socket_dev_suspend_noirq(struct device *dev)
+{
+ return __pcmcia_pm_op(dev, socket_suspend);
+}
+
+static int pcmcia_socket_dev_resume_noirq(struct device *dev)
+{
+ return __pcmcia_pm_op(dev, socket_early_resume);
+}
+
+static int pcmcia_socket_dev_resume(struct device *dev)
+{
+ return __pcmcia_pm_op(dev, socket_late_resume);
+}
+
+static const struct dev_pm_ops pcmcia_socket_pm_ops = {
+ /* dev_resume may be called with IRQs enabled */
+ SET_SYSTEM_SLEEP_PM_OPS(NULL,
+ pcmcia_socket_dev_resume)
+
+ /* late suspend must be called with IRQs disabled */
+ .suspend_noirq = pcmcia_socket_dev_suspend_noirq,
+ .freeze_noirq = pcmcia_socket_dev_suspend_noirq,
+ .poweroff_noirq = pcmcia_socket_dev_suspend_noirq,
+
+ /* early resume must be called with IRQs disabled */
+ .resume_noirq = pcmcia_socket_dev_resume_noirq,
+ .thaw_noirq = pcmcia_socket_dev_resume_noirq,
+ .restore_noirq = pcmcia_socket_dev_resume_noirq,
+};
+
+#define PCMCIA_SOCKET_CLASS_PM_OPS (&pcmcia_socket_pm_ops)
+
+#else /* CONFIG_PM */
+
+#define PCMCIA_SOCKET_CLASS_PM_OPS NULL
+
+#endif /* CONFIG_PM */
+
struct class pcmcia_socket_class = {
.name = "pcmcia_socket",
.dev_uevent = pcmcia_socket_uevent,
.dev_release = pcmcia_release_socket,
.class_release = pcmcia_release_socket_class,
+ .pm = PCMCIA_SOCKET_CLASS_PM_OPS,
};
EXPORT_SYMBOL(pcmcia_socket_class);
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <pcmcia/cs_types.h>
static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
{
int ret;
- unsigned long flags;
if (sock->stschg_irq != -1) {
ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
* active one disabled.
*/
if (sock->board_type == BOARD_TYPE_DB1200) {
- local_irq_save(flags);
-
ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
IRQF_DISABLED, "pcmcia_insert", sock);
if (ret)
IRQF_DISABLED, "pcmcia_eject", sock);
if (ret) {
free_irq(sock->insert_irq, sock);
- local_irq_restore(flags);
goto out1;
}
- /* disable the currently active one */
+ /* enable the currently silent one */
if (db1200_card_inserted(sock))
- disable_irq_nosync(sock->insert_irq);
+ enable_irq(sock->eject_irq);
else
- disable_irq_nosync(sock->eject_irq);
-
- local_irq_restore(flags);
+ enable_irq(sock->insert_irq);
} else {
/* all other (older) Db1x00 boards use a GPIO to show
* card detection status: use both-edge triggers.
return 0;
}
-#ifdef CONFIG_PM
-static int db1x_pcmcia_suspend(struct device *dev)
-{
- return pcmcia_socket_dev_suspend(dev);
-}
-
-static int db1x_pcmcia_resume(struct device *dev)
-{
- return pcmcia_socket_dev_resume(dev);
-}
-
-static struct dev_pm_ops db1x_pcmcia_pmops = {
- .resume = db1x_pcmcia_resume,
- .suspend = db1x_pcmcia_suspend,
- .thaw = db1x_pcmcia_resume,
- .freeze = db1x_pcmcia_suspend,
-};
-
-#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops
-
-#else
-
-#define DB1XXX_SS_PMOPS NULL
-
-#endif
-
static struct platform_driver db1x_pcmcia_socket_driver = {
.driver = {
.name = "db1xxx_pcmcia",
.owner = THIS_MODULE,
- .pm = DB1XXX_SS_PMOPS
},
.probe = db1x_pcmcia_socket_probe,
.remove = __devexit_p(db1x_pcmcia_socket_remove),
#include <linux/firmware.h>
#include <linux/kref.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
mutex_lock(&s->ops_mutex);
list_del(&p_dev->socket_device_list);
- p_dev->_removed = 1;
mutex_unlock(&s->ops_mutex);
dev_dbg(&p_dev->dev, "unregistering device\n");
p_dev->device_no = (s->device_count++);
mutex_unlock(&s->ops_mutex);
- /* max of 2 devices per card */
- if (p_dev->device_no >= 2)
+ /* max of 2 PFC devices */
+ if ((p_dev->device_no >= 2) && (function == 0))
+ goto err_free;
+
+ /* max of 4 devices overall */
+ if (p_dev->device_no >= 4)
goto err_free;
p_dev->socket = s;
static void pcmcia_requery(struct pcmcia_socket *s)
{
- int present, has_pfc;
-
- mutex_lock(&s->ops_mutex);
- present = s->pcmcia_state.present;
- mutex_unlock(&s->ops_mutex);
-
- if (!present)
- return;
+ int has_pfc;
if (s->functions == 0) {
pcmcia_card_add(s);
new_funcs = mfc.nfn;
else
new_funcs = 1;
- if (old_funcs > new_funcs) {
+ if (old_funcs != new_funcs) {
+ /* we need to re-start */
pcmcia_card_remove(s, NULL);
pcmcia_card_add(s);
- } else if (new_funcs > old_funcs) {
- s->functions = new_funcs;
- pcmcia_device_add(s, 1);
}
}
struct pcmcia_socket *s = dev->socket;
const struct firmware *fw;
int ret = -ENOMEM;
+ cistpl_longlink_mfc_t mfc;
+ int old_funcs, new_funcs = 1;
if (!filename)
return -EINVAL;
goto release;
}
+ /* we need to re-start if the number of functions changed */
+ old_funcs = s->functions;
+ if (!pccard_read_tuple(s, BIND_FN_ALL, CISTPL_LONGLINK_MFC,
+ &mfc))
+ new_funcs = mfc.nfn;
+
+ if (old_funcs != new_funcs)
+ ret = -EBUSY;
/* update information */
pcmcia_device_query(dev);
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
- if (dev->device_no != did->device_no)
- return 0;
+ dev_dbg(&dev->dev, "this is a pseudo-multi-function device\n");
mutex_lock(&dev->socket->ops_mutex);
dev->socket->pcmcia_state.has_pfc = 1;
mutex_unlock(&dev->socket->ops_mutex);
+ if (dev->device_no != did->device_no)
+ return 0;
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_FUNC_ID) {
/* if this is a pseudo-multi-function device,
* we need explicit matches */
- if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO)
+ if (dev->socket->pcmcia_state.has_pfc)
return 0;
if (dev->device_no)
return 0;
if (did->match_flags & PCMCIA_DEV_ID_MATCH_FAKE_CIS) {
dev_dbg(&dev->dev, "device needs a fake CIS\n");
if (!dev->socket->fake_cis)
- pcmcia_load_firmware(dev, did->cisfile);
-
- if (!dev->socket->fake_cis)
- return 0;
+ if (pcmcia_load_firmware(dev, did->cisfile))
+ return 0;
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_ANONYMOUS) {
switch (event) {
case CS_EVENT_CARD_REMOVAL:
- mutex_lock(&s->ops_mutex);
- s->pcmcia_state.present = 0;
- mutex_unlock(&s->ops_mutex);
+ atomic_set(&skt->present, 0);
pcmcia_card_remove(skt, NULL);
handle_event(skt, event);
mutex_lock(&s->ops_mutex);
break;
case CS_EVENT_CARD_INSERTION:
+ atomic_set(&skt->present, 1);
mutex_lock(&s->ops_mutex);
s->pcmcia_state.has_pfc = 0;
- s->pcmcia_state.present = 1;
destroy_cis_cache(s); /* to be on the safe side... */
mutex_unlock(&s->ops_mutex);
pcmcia_card_add(skt);
destroy_cis_cache(skt);
kfree(skt->fake_cis);
skt->fake_cis = NULL;
+ s->functions = 0;
mutex_unlock(&s->ops_mutex);
/* now, add the new card */
ds_event(skt, CS_EVENT_CARD_INSERTION,
return 0;
} /* ds_event */
-
+/*
+ * NOTE: This is racy. There's no guarantee the card will still be
+ * physically present, even if the call to this function returns
+ * non-NULL. Furthermore, the device driver most likely is unbound
+ * almost immediately, so the timeframe where pcmcia_dev_present
+ * returns NULL is probably really really small.
+ */
struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *_p_dev)
{
struct pcmcia_device *p_dev;
if (!p_dev)
return NULL;
- mutex_lock(&p_dev->socket->ops_mutex);
- if (!p_dev->socket->pcmcia_state.present)
- goto out;
-
- if (p_dev->socket->pcmcia_state.dead)
- goto out;
+ if (atomic_read(&p_dev->socket->present) != 0)
+ ret = p_dev;
- if (p_dev->_removed)
- goto out;
-
- if (p_dev->suspended)
- goto out;
-
- ret = p_dev;
- out:
- mutex_unlock(&p_dev->socket->ops_mutex);
pcmcia_put_dev(p_dev);
return ret;
}
return ret;
}
+ atomic_set(&socket->present, 0);
+
return 0;
}
if (!socket)
return;
- mutex_lock(&socket->ops_mutex);
- socket->pcmcia_state.dead = 1;
- mutex_unlock(&socket->ops_mutex);
-
pccard_register_pcmcia(socket, NULL);
/* unregister any unbound devices */
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/of_platform.h>
+#include <linux/slab.h>
#include <pcmcia/ss.h>
};
MODULE_DEVICE_TABLE(pci, i82092aa_pci_ids);
-#ifdef CONFIG_PM
-static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int i82092aa_socket_resume (struct pci_dev *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
-#endif
-
static struct pci_driver i82092aa_pci_driver = {
.name = "i82092aa",
.id_table = i82092aa_pci_ids,
.probe = i82092aa_pci_probe,
.remove = __devexit_p(i82092aa_pci_remove),
-#ifdef CONFIG_PM
- .suspend = i82092aa_socket_suspend,
- .resume = i82092aa_socket_resume,
-#endif
};
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/timer.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
return 0;
}
-static int i82365_drv_pcmcia_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-static int i82365_drv_pcmcia_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
static struct pccard_operations pcic_operations = {
.init = pcic_init,
.get_status = pcic_get_status,
.name = "i82365",
.owner = THIS_MODULE,
},
- .suspend = i82365_drv_pcmcia_suspend,
- .resume = i82365_drv_pcmcia_resume,
};
static struct platform_device *i82365_device;
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/timer.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
.set_mem_map = pcc_set_mem_map,
};
-static int cfc_drv_pcmcia_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-static int cfc_drv_pcmcia_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
/*====================================================================*/
static struct platform_driver pcc_driver = {
.name = "cfc",
.owner = THIS_MODULE,
},
- .suspend = cfc_drv_pcmcia_suspend,
- .resume = cfc_drv_pcmcia_resume,
};
static struct platform_device pcc_device = {
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/timer.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
.set_mem_map = pcc_set_mem_map,
};
-static int pcc_drv_pcmcia_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int pcc_drv_pcmcia_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
/*====================================================================*/
static struct platform_driver pcc_driver = {
.name = "pcc",
.owner = THIS_MODULE,
},
- .suspend = pcc_drv_pcmcia_suspend,
- .resume = pcc_drv_pcmcia_resume,
};
static struct platform_device pcc_device = {
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/delay.h>
return 0;
}
-#ifdef CONFIG_PM
-static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&pdev->dev);
-}
-
-static int m8xx_resume(struct platform_device *pdev)
-{
- return pcmcia_socket_dev_resume(&pdev->dev);
-}
-#else
-#define m8xx_suspend NULL
-#define m8xx_resume NULL
-#endif
-
static const struct of_device_id m8xx_pcmcia_match[] = {
{
.type = "pcmcia",
.match_table = m8xx_pcmcia_match,
.probe = m8xx_probe,
.remove = m8xx_remove,
- .suspend = m8xx_suspend,
- .resume = m8xx_resume,
};
static int __init m8xx_init(void)
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <pcmcia/ss.h>
return 0;
}
-static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return pcmcia_socket_dev_suspend(&pdev->dev);
-}
-
-static int omap_cf_resume(struct platform_device *pdev)
-{
- return pcmcia_socket_dev_resume(&pdev->dev);
-}
-
static struct platform_driver omap_cf_driver = {
.driver = {
.name = (char *) driver_name,
.owner = THIS_MODULE,
},
.remove = __exit_p(omap_cf_remove),
- .suspend = omap_cf_suspend,
- .resume = omap_cf_resume,
};
static int __init omap_cf_init(void)
#include <linux/proc_fs.h>
#include <linux/poll.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/smp_lock.h>
#include <linux/workqueue.h>
warning_printed = 1;
}
- if (s->pcmcia_state.present)
+ if (atomic_read(&s->present))
queue_event(user, CS_EVENT_CARD_INSERTION);
out:
unlock_kernel();
return -EIO;
s = user->socket;
- if (s->pcmcia_state.dead)
- return -EIO;
-
ret = wait_event_interruptible(s->queue, !queue_empty(user));
if (ret == 0)
ret = put_user(get_queued_event(user), (int __user *)buf) ? -EFAULT : 4;
return -EIO;
s = user->socket;
- if (s->pcmcia_state.dead)
- return -EIO;
size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
if (size > sizeof(ds_ioctl_arg_t))
#include <linux/pci.h>
#include <linux/device.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
else
printk(KERN_WARNING "pcmcia: Driver needs updating to support IRQ sharing.\n");
-#ifdef CONFIG_PCMCIA_PROBE
-
- if (s->irq.AssignedIRQ != 0) {
- /* If the interrupt is already assigned, it must be the same */
+ /* If the interrupt is already assigned, it must be the same */
+ if (s->irq.AssignedIRQ != 0)
irq = s->irq.AssignedIRQ;
- } else {
+
+#ifdef CONFIG_PCMCIA_PROBE
+ if (!irq) {
int try;
u32 mask = s->irq_mask;
void *data = p_dev; /* something unique to this device */
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/device.h>
+#include <linux/io.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
#include <pcmcia/cs.h>
#include <asm/system.h>
-#include <asm/io.h>
#include "pd6729.h"
#include "i82365.h"
? SS_READY : 0;
}
- if (events) {
+ if (events)
pcmcia_parse_events(&socket[i].socket, events);
- }
+
active |= events;
}
status = indirect_read(socket, I365_STATUS);
*value = 0;
- if ((status & I365_CS_DETECT) == I365_CS_DETECT) {
+ if ((status & I365_CS_DETECT) == I365_CS_DETECT)
*value |= SS_DETECT;
- }
/*
* IO cards have a different meaning of bits 0,1
socket->card_irq = state->io_irq;
reg = 0;
- /* The reset bit has "inverse" logic */
+ /* The reset bit has "inverse" logic */
if (!(state->flags & SS_RESET))
reg |= I365_PC_RESET;
if (state->flags & SS_IOCARD)
indirect_write(socket, I365_POWER, reg);
if (irq_mode == 1) {
- /* all interrupts are to be done as PCI interrupts */
+ /* all interrupts are to be done as PCI interrupts */
data = PD67_EC1_INV_MGMT_IRQ | PD67_EC1_INV_CARD_IRQ;
} else
data = 0;
/* Enable specific interrupt events */
reg = 0x00;
- if (state->csc_mask & SS_DETECT) {
+ if (state->csc_mask & SS_DETECT)
reg |= I365_CSC_DETECT;
- }
+
if (state->flags & SS_IOCARD) {
if (state->csc_mask & SS_STSCHG)
reg |= I365_CSC_STSCHG;
ioctl = indirect_read(socket, I365_IOCTL) & ~I365_IOCTL_MASK(map);
- if (io->flags & MAP_0WS) ioctl |= I365_IOCTL_0WS(map);
- if (io->flags & MAP_16BIT) ioctl |= I365_IOCTL_16BIT(map);
- if (io->flags & MAP_AUTOSZ) ioctl |= I365_IOCTL_IOCS16(map);
+ if (io->flags & MAP_0WS)
+ ioctl |= I365_IOCTL_0WS(map);
+ if (io->flags & MAP_16BIT)
+ ioctl |= I365_IOCTL_16BIT(map);
+ if (io->flags & MAP_AUTOSZ)
+ ioctl |= I365_IOCTL_IOCS16(map);
indirect_write(socket, I365_IOCTL, ioctl);
/* write the stop address */
- i= (mem->res->end >> 12) & 0x0fff;
+ i = (mem->res->end >> 12) & 0x0fff;
switch (to_cycles(mem->speed)) {
case 0:
break;
/* the pccard structure and its functions */
static struct pccard_operations pd6729_operations = {
- .init = pd6729_init,
+ .init = pd6729_init,
.get_status = pd6729_get_status,
.set_socket = pd6729_set_socket,
.set_io_map = pd6729_set_io_map,
static int pd6729_check_irq(int irq)
{
- if (request_irq(irq, pd6729_test, IRQF_PROBE_SHARED, "x", pd6729_test)
- != 0) return -1;
+ int ret;
+
+ ret = request_irq(irq, pd6729_test, IRQF_PROBE_SHARED, "x",
+ pd6729_test);
+ if (ret)
+ return -1;
+
free_irq(irq, pd6729_test);
return 0;
}
if (irq_mode == 1) {
printk(KERN_INFO "pd6729: PCI card interrupts, "
- "PCI status changes\n");
+ "PCI status changes\n");
return 0;
}
if (mask & (1<<i))
printk("%s%d", ((mask & ((1<<i)-1)) ? "," : ""), i);
- if (mask == 0) printk("none!");
-
- printk(" polling status changes.\n");
+ if (mask == 0)
+ printk("none!");
+ else
+ printk(" polling status changes.\n");
return mask;
}
socket = kzalloc(sizeof(struct pd6729_socket) * MAX_SOCKETS,
GFP_KERNEL);
- if (!socket)
+ if (!socket) {
+ dev_warn(&dev->dev, "failed to kzalloc socket.\n");
return -ENOMEM;
+ }
- if ((ret = pci_enable_device(dev)))
+ ret = pci_enable_device(dev);
+ if (ret) {
+ dev_warn(&dev->dev, "failed to enable pci_device.\n");
goto err_out_free_mem;
+ }
if (!pci_resource_start(dev, 0)) {
dev_warn(&dev->dev, "refusing to load the driver as the "
dev_info(&dev->dev, "Cirrus PD6729 PCI to PCMCIA Bridge at 0x%llx "
"on irq %d\n",
(unsigned long long)pci_resource_start(dev, 0), dev->irq);
- /*
+ /*
* Since we have no memory BARs some firmware may not
* have had PCI_COMMAND_MEMORY enabled, yet the device needs it.
*/
pci_set_drvdata(dev, socket);
if (irq_mode == 1) {
/* Register the interrupt handler */
- if ((ret = request_irq(dev->irq, pd6729_interrupt, IRQF_SHARED,
- "pd6729", socket))) {
+ ret = request_irq(dev->irq, pd6729_interrupt, IRQF_SHARED,
+ "pd6729", socket);
+ if (ret) {
dev_err(&dev->dev, "Failed to register irq %d\n",
dev->irq);
goto err_out_free_res;
kfree(socket);
}
-#ifdef CONFIG_PM
-static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int pd6729_socket_resume(struct pci_dev *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
-#endif
-
static struct pci_device_id pd6729_pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_CIRRUS,
.id_table = pd6729_pci_ids,
.probe = pd6729_pci_probe,
.remove = __devexit_p(pd6729_pci_remove),
-#ifdef CONFIG_PM
- .suspend = pd6729_socket_suspend,
- .resume = pd6729_socket_resume,
-#endif
};
static int pd6729_module_init(void)
======================================================================*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/ioport.h>
return 0;
}
-static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
-{
- return pcmcia_socket_dev_suspend(dev);
-}
-
static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
pxa2xx_configure_sockets(dev);
- return pcmcia_socket_dev_resume(dev);
+ return 0;
}
static const struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = {
- .suspend = pxa2xx_drv_pcmcia_suspend,
.resume = pxa2xx_drv_pcmcia_resume,
};
* (C) 1999 David A. Hinds
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
return;
}
for (i = base, most = 0; i < base+num; i += 8) {
- res = claim_region(NULL, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
+ res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
if (!res)
continue;
hole = inb(i);
bad = any = 0;
for (i = base; i < base+num; i += 8) {
- res = claim_region(NULL, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
- if (!res)
+ res = claim_region(s, i, 8, IORESOURCE_IO, "PCMCIA ioprobe");
+ if (!res) {
+ if (!any)
+ printk(" excluding");
+ if (!bad)
+ bad = any = i;
continue;
+ }
for (j = 0; j < 8; j++)
if (inb(i+j) != most)
break;
}
if (bad) {
if ((num > 16) && (bad == base) && (i == base+num)) {
+ sub_interval(&s_data->io_db, bad, i-bad);
printk(" nothing: probe failed.\n");
return;
} else {
struct resource_map *map;
};
-static resource_size_t
-pcmcia_common_align(void *align_data, const struct resource *res,
- resource_size_t size, resource_size_t align)
+static resource_size_t pcmcia_common_align(struct pcmcia_align_data *align_data,
+ resource_size_t start)
{
- struct pcmcia_align_data *data = align_data;
- resource_size_t start;
+ resource_size_t ret;
/*
* Ensure that we have the correct start address
*/
- start = (res->start & ~data->mask) + data->offset;
- if (start < res->start)
- start += data->mask + 1;
- return start;
+ ret = (start & ~align_data->mask) + align_data->offset;
+ if (ret < start)
+ ret += align_data->mask + 1;
+ return ret;
}
static resource_size_t
struct resource_map *m;
resource_size_t start;
- start = pcmcia_common_align(data, res, size, align);
+ start = pcmcia_common_align(data, res->start);
for (m = data->map->next; m != data->map; m = m->next) {
- unsigned long start = m->base;
- unsigned long end = m->base + m->num - 1;
+ unsigned long map_start = m->base;
+ unsigned long map_end = m->base + m->num - 1;
/*
* If the lower resources are not available, try aligning
* to this entry of the resource database to see if it'll
* fit here.
*/
- if (res->start < start) {
- start = pcmcia_common_align(data, res, size, align);
- }
+ if (start < map_start)
+ start = pcmcia_common_align(data, map_start);
/*
* If we're above the area which was passed in, there's
* no point proceeding.
*/
- if (res->start >= res->end)
+ if (start >= res->end)
break;
- if ((res->start + size - 1) <= end)
+ if ((start + size - 1) <= map_end)
break;
}
static int adjust_io(struct pcmcia_socket *s, unsigned int action, unsigned long start, unsigned long end)
{
struct socket_data *data = s->resource_data;
- unsigned long size = end - start + 1;
+ unsigned long size;
int ret = 0;
+#if defined(CONFIG_X86)
+ /* on x86, avoid anything < 0x100 for it is often used for
+ * legacy platform devices */
+ if (start < 0x100)
+ start = 0x100;
+#endif
+
+ size = end - start + 1;
+
if (end < start)
return -EINVAL;
if (res == &ioport_resource)
continue;
dev_printk(KERN_INFO, &s->cb_dev->dev,
- "pcmcia: parent PCI bridge I/O "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ "pcmcia: parent PCI bridge window: %pR\n",
+ res);
if (!adjust_io(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_IO;
if (res == &iomem_resource)
continue;
dev_printk(KERN_INFO, &s->cb_dev->dev,
- "pcmcia: parent PCI bridge Memory "
- "window: 0x%llx - 0x%llx\n",
- (unsigned long long)res->start,
- (unsigned long long)res->end);
+ "pcmcia: parent PCI bridge window: %pR\n",
+ res);
if (!adjust_memory(s, ADD_MANAGED_RESOURCE, res->start, res->end))
done |= IORESOURCE_MEM;
}
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <pcmcia/cs_types.h>
return 0;
}
-static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int sa11x0_drv_pcmcia_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
-
static struct platform_driver sa11x0_pcmcia_driver = {
.driver = {
.name = "sa11x0-pcmcia",
},
.probe = sa11x0_drv_pcmcia_probe,
.remove = sa11x0_drv_pcmcia_remove,
- .suspend = sa11x0_drv_pcmcia_suspend,
- .resume = sa11x0_drv_pcmcia_resume,
};
/* sa11x0_pcmcia_init()
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <pcmcia/ss.h>
return 0;
}
-static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int pcmcia_resume(struct sa1111_dev *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
-
static struct sa1111_driver pcmcia_driver = {
.drv = {
.name = "sa1111-pcmcia",
.devid = SA1111_DEVID_PCMCIA,
.probe = pcmcia_probe,
.remove = __devexit_p(pcmcia_remove),
- .suspend = pcmcia_suspend,
- .resume = pcmcia_resume,
};
static int __init sa1111_drv_pcmcia_init(void)
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/delay.h>
return id;
}
-static int tcic_drv_pcmcia_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int tcic_drv_pcmcia_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
/*====================================================================*/
static struct platform_driver tcic_driver = {
.name = "tcic-pcmcia",
.owner = THIS_MODULE,
},
- .suspend = tcic_drv_pcmcia_suspend,
- .resume = tcic_drv_pcmcia_resume,
};
static struct platform_device tcic_device = {
__setup("vrc4171_card=", vrc4171_card_setup);
-static int vrc4171_card_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- return pcmcia_socket_dev_suspend(&dev->dev);
-}
-
-static int vrc4171_card_resume(struct platform_device *dev)
-{
- return pcmcia_socket_dev_resume(&dev->dev);
-}
-
static struct platform_driver vrc4171_card_driver = {
.driver = {
.name = vrc4171_card_name,
.owner = THIS_MODULE,
},
- .suspend = vrc4171_card_suspend,
- .resume = vrc4171_card_resume,
};
static int __devinit vrc4171_card_init(void)
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/resource.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <pcmcia/cs_types.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/ss.h>
{
struct pci_dev *pdev = to_pci_dev(dev);
struct yenta_socket *socket = pci_get_drvdata(pdev);
- int ret;
-
- ret = pcmcia_socket_dev_suspend(dev);
if (!socket)
- return ret;
+ return 0;
if (socket->type && socket->type->save_state)
socket->type->save_state(socket);
*/
/* pci_set_power_state(dev, 3); */
- return ret;
+ return 0;
}
static int yenta_dev_resume_noirq(struct device *dev)
if (socket->type && socket->type->restore_state)
socket->type->restore_state(socket);
- pcmcia_socket_dev_early_resume(dev);
- return 0;
-}
-
-static int yenta_dev_resume(struct device *dev)
-{
- pcmcia_socket_dev_late_resume(dev);
return 0;
}
static const struct dev_pm_ops yenta_pm_ops = {
.suspend_noirq = yenta_dev_suspend_noirq,
.resume_noirq = yenta_dev_resume_noirq,
- .resume = yenta_dev_resume,
.freeze_noirq = yenta_dev_suspend_noirq,
.thaw_noirq = yenta_dev_resume_noirq,
- .thaw = yenta_dev_resume,
.poweroff_noirq = yenta_dev_suspend_noirq,
.restore_noirq = yenta_dev_resume_noirq,
- .restore = yenta_dev_resume,
};
#define YENTA_PM_OPS (¥ta_pm_ops)
If you have an Eee PC laptop, say Y or M here.
+config EEEPC_WMI
+ tristate "Eee PC WMI Hotkey Driver (EXPERIMENTAL)"
+ depends on ACPI_WMI
+ depends on INPUT
+ depends on EXPERIMENTAL
+ select INPUT_SPARSEKMAP
+ ---help---
+ Say Y here if you want to support WMI-based hotkeys on Eee PC laptops.
+
+ To compile this driver as a module, choose M here: the module will
+ be called eeepc-wmi.
config ACPI_WMI
tristate "WMI"
#
obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
obj-$(CONFIG_EEEPC_LAPTOP) += eeepc-laptop.o
+obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
obj-$(CONFIG_ACPI_CMPC) += classmate-laptop.o
obj-$(CONFIG_COMPAL_LAPTOP) += compal-laptop.o
#include <linux/rfkill.h>
#include <linux/workqueue.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#include <linux/input.h>
#include <linux/input/sparse-keymap.h>
#include <linux/rfkill.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
module_param(wapf, uint, 0644);
MODULE_PARM_DESC(wapf, "WAPF value");
-static uint wlan_status = 1;
-static uint bluetooth_status = 1;
+static int wlan_status = 1;
+static int bluetooth_status = 1;
-module_param(wlan_status, uint, 0644);
+module_param(wlan_status, int, 0644);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
-module_param(bluetooth_status, uint, 0644);
+module_param(bluetooth_status, int, 0644);
MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
/* Backlight */
static acpi_handle lcd_switch_handle;
-static const char *lcd_switch_paths[] = {
+static char *lcd_switch_paths[] = {
"\\_SB.PCI0.SBRG.EC0._Q10", /* All new models */
"\\_SB.PCI0.ISA.EC0._Q10", /* A1x */
"\\_SB.PCI0.PX40.ECD0._Q10", /* L3C */
#define METHOD_SWITCH_DISPLAY "SDSP"
static acpi_handle display_get_handle;
-static const char *display_get_paths[] = {
+static char *display_get_paths[] = {
/* A6B, A6K A6R A7D F3JM L4R M6R A3G M6A M6V VX-1 V6J V6V W3Z */
"\\_SB.PCI0.P0P1.VGA.GETD",
/* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V S5A M5A z33A W1Jc W2V G1 */
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <acpi/acpi_drivers.h>
#include <linux/backlight.h>
#include <linux/acpi.h>
#include <linux/mm.h>
#include <linux/i8042.h>
+#include <linux/slab.h>
#include "../../firmware/dcdbas.h"
#define BRIGHTNESS_TOKEN 0x7d
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/input.h>
#include <acpi/acpi_drivers.h>
if (dell_new_hk_type && (buffer_entry[1] != 0x10)) {
printk(KERN_INFO "dell-wmi: Received unknown WMI event"
" (0x%x)\n", buffer_entry[1]);
+ kfree(obj);
return;
}
key->keycode == KEY_BRIGHTNESSDOWN) && acpi_video) {
/* Don't report brightness notifications that will also
* come via ACPI */
- return;
+ ;
} else {
input_report_key(dell_wmi_input_dev, key->keycode, 1);
input_sync(dell_wmi_input_dev);
#include <linux/fb.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <linux/uaccess.h>
struct backlight_device *backlight_device;
struct input_dev *inputdev;
- struct key_entry *keymap;
struct rfkill *wlan_rfkill;
struct rfkill *bluetooth_rfkill;
static void eeepc_input_exit(struct eeepc_laptop *eeepc)
{
if (eeepc->inputdev) {
+ sparse_keymap_free(eeepc->inputdev);
input_unregister_device(eeepc->inputdev);
- kfree(eeepc->keymap);
}
}
--- /dev/null
+/*
+ * Eee PC WMI hotkey driver
+ *
+ * Copyright(C) 2010 Intel Corporation.
+ *
+ * Portions based on wistron_btns.c:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#define EEEPC_WMI_FILE "eeepc-wmi"
+
+MODULE_AUTHOR("Yong Wang <yong.y.wang@intel.com>");
+MODULE_DESCRIPTION("Eee PC WMI Hotkey Driver");
+MODULE_LICENSE("GPL");
+
+#define EEEPC_WMI_EVENT_GUID "ABBC0F72-8EA1-11D1-00A0-C90629100000"
+#define EEEPC_WMI_MGMT_GUID "97845ED0-4E6D-11DE-8A39-0800200C9A66"
+
+MODULE_ALIAS("wmi:"EEEPC_WMI_EVENT_GUID);
+MODULE_ALIAS("wmi:"EEEPC_WMI_MGMT_GUID);
+
+#define NOTIFY_BRNUP_MIN 0x11
+#define NOTIFY_BRNUP_MAX 0x1f
+#define NOTIFY_BRNDOWN_MIN 0x20
+#define NOTIFY_BRNDOWN_MAX 0x2e
+
+#define EEEPC_WMI_METHODID_DEVS 0x53564544
+#define EEEPC_WMI_METHODID_DSTS 0x53544344
+
+#define EEEPC_WMI_DEVID_BACKLIGHT 0x00050012
+
+static const struct key_entry eeepc_wmi_keymap[] = {
+ /* Sleep already handled via generic ACPI code */
+ { KE_KEY, 0x5d, { KEY_WLAN } },
+ { KE_KEY, 0x32, { KEY_MUTE } },
+ { KE_KEY, 0x31, { KEY_VOLUMEDOWN } },
+ { KE_KEY, 0x30, { KEY_VOLUMEUP } },
+ { KE_IGNORE, NOTIFY_BRNDOWN_MIN, { KEY_BRIGHTNESSDOWN } },
+ { KE_IGNORE, NOTIFY_BRNUP_MIN, { KEY_BRIGHTNESSUP } },
+ { KE_KEY, 0xcc, { KEY_SWITCHVIDEOMODE } },
+ { KE_END, 0},
+};
+
+struct bios_args {
+ u32 dev_id;
+ u32 ctrl_param;
+};
+
+struct eeepc_wmi {
+ struct input_dev *inputdev;
+ struct backlight_device *backlight_device;
+};
+
+static struct platform_device *platform_device;
+
+static int eeepc_wmi_input_init(struct eeepc_wmi *eeepc)
+{
+ int err;
+
+ eeepc->inputdev = input_allocate_device();
+ if (!eeepc->inputdev)
+ return -ENOMEM;
+
+ eeepc->inputdev->name = "Eee PC WMI hotkeys";
+ eeepc->inputdev->phys = EEEPC_WMI_FILE "/input0";
+ eeepc->inputdev->id.bustype = BUS_HOST;
+ eeepc->inputdev->dev.parent = &platform_device->dev;
+
+ err = sparse_keymap_setup(eeepc->inputdev, eeepc_wmi_keymap, NULL);
+ if (err)
+ goto err_free_dev;
+
+ err = input_register_device(eeepc->inputdev);
+ if (err)
+ goto err_free_keymap;
+
+ return 0;
+
+err_free_keymap:
+ sparse_keymap_free(eeepc->inputdev);
+err_free_dev:
+ input_free_device(eeepc->inputdev);
+ return err;
+}
+
+static void eeepc_wmi_input_exit(struct eeepc_wmi *eeepc)
+{
+ if (eeepc->inputdev) {
+ sparse_keymap_free(eeepc->inputdev);
+ input_unregister_device(eeepc->inputdev);
+ }
+
+ eeepc->inputdev = NULL;
+}
+
+static acpi_status eeepc_wmi_get_devstate(u32 dev_id, u32 *ctrl_param)
+{
+ struct acpi_buffer input = { (acpi_size)sizeof(u32), &dev_id };
+ struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+ u32 tmp;
+
+ status = wmi_evaluate_method(EEEPC_WMI_MGMT_GUID,
+ 1, EEEPC_WMI_METHODID_DSTS, &input, &output);
+
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = (union acpi_object *)output.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER)
+ tmp = (u32)obj->integer.value;
+ else
+ tmp = 0;
+
+ if (ctrl_param)
+ *ctrl_param = tmp;
+
+ kfree(obj);
+
+ return status;
+
+}
+
+static acpi_status eeepc_wmi_set_devstate(u32 dev_id, u32 ctrl_param)
+{
+ struct bios_args args = {
+ .dev_id = dev_id,
+ .ctrl_param = ctrl_param,
+ };
+ struct acpi_buffer input = { (acpi_size)sizeof(args), &args };
+ acpi_status status;
+
+ status = wmi_evaluate_method(EEEPC_WMI_MGMT_GUID,
+ 1, EEEPC_WMI_METHODID_DEVS, &input, NULL);
+
+ return status;
+}
+
+static int read_brightness(struct backlight_device *bd)
+{
+ static u32 ctrl_param;
+ acpi_status status;
+
+ status = eeepc_wmi_get_devstate(EEEPC_WMI_DEVID_BACKLIGHT, &ctrl_param);
+
+ if (ACPI_FAILURE(status))
+ return -1;
+ else
+ return ctrl_param & 0xFF;
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+
+ static u32 ctrl_param;
+ acpi_status status;
+
+ ctrl_param = bd->props.brightness;
+
+ status = eeepc_wmi_set_devstate(EEEPC_WMI_DEVID_BACKLIGHT, ctrl_param);
+
+ if (ACPI_FAILURE(status))
+ return -1;
+ else
+ return 0;
+}
+
+static const struct backlight_ops eeepc_wmi_bl_ops = {
+ .get_brightness = read_brightness,
+ .update_status = update_bl_status,
+};
+
+static int eeepc_wmi_backlight_notify(struct eeepc_wmi *eeepc, int code)
+{
+ struct backlight_device *bd = eeepc->backlight_device;
+ int old = bd->props.brightness;
+ int new;
+
+ if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
+ new = code - NOTIFY_BRNUP_MIN + 1;
+ else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX)
+ new = code - NOTIFY_BRNDOWN_MIN;
+
+ bd->props.brightness = new;
+ backlight_update_status(bd);
+ backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
+
+ return old;
+}
+
+static int eeepc_wmi_backlight_init(struct eeepc_wmi *eeepc)
+{
+ struct backlight_device *bd;
+ struct backlight_properties props;
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 15;
+ bd = backlight_device_register(EEEPC_WMI_FILE,
+ &platform_device->dev, eeepc,
+ &eeepc_wmi_bl_ops, &props);
+ if (IS_ERR(bd)) {
+ pr_err("Could not register backlight device\n");
+ return PTR_ERR(bd);
+ }
+
+ eeepc->backlight_device = bd;
+
+ bd->props.brightness = read_brightness(bd);
+ bd->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(bd);
+
+ return 0;
+}
+
+static void eeepc_wmi_backlight_exit(struct eeepc_wmi *eeepc)
+{
+ if (eeepc->backlight_device)
+ backlight_device_unregister(eeepc->backlight_device);
+
+ eeepc->backlight_device = NULL;
+}
+
+static void eeepc_wmi_notify(u32 value, void *context)
+{
+ struct eeepc_wmi *eeepc = context;
+ struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+ int code;
+ int orig_code;
+
+ status = wmi_get_event_data(value, &response);
+ if (status != AE_OK) {
+ pr_err("bad event status 0x%x\n", status);
+ return;
+ }
+
+ obj = (union acpi_object *)response.pointer;
+
+ if (obj && obj->type == ACPI_TYPE_INTEGER) {
+ code = obj->integer.value;
+ orig_code = code;
+
+ if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX)
+ code = NOTIFY_BRNUP_MIN;
+ else if (code >= NOTIFY_BRNDOWN_MIN &&
+ code <= NOTIFY_BRNDOWN_MAX)
+ code = NOTIFY_BRNDOWN_MIN;
+
+ if (code == NOTIFY_BRNUP_MIN || code == NOTIFY_BRNDOWN_MIN) {
+ if (!acpi_video_backlight_support())
+ eeepc_wmi_backlight_notify(eeepc, orig_code);
+ }
+
+ if (!sparse_keymap_report_event(eeepc->inputdev,
+ code, 1, true))
+ pr_info("Unknown key %x pressed\n", code);
+ }
+
+ kfree(obj);
+}
+
+static int __devinit eeepc_wmi_platform_probe(struct platform_device *device)
+{
+ struct eeepc_wmi *eeepc;
+ int err;
+ acpi_status status;
+
+ eeepc = platform_get_drvdata(device);
+
+ err = eeepc_wmi_input_init(eeepc);
+ if (err)
+ goto error_input;
+
+ if (!acpi_video_backlight_support()) {
+ err = eeepc_wmi_backlight_init(eeepc);
+ if (err)
+ goto error_backlight;
+ } else
+ pr_info("Backlight controlled by ACPI video driver\n");
+
+ status = wmi_install_notify_handler(EEEPC_WMI_EVENT_GUID,
+ eeepc_wmi_notify, eeepc);
+ if (ACPI_FAILURE(status)) {
+ pr_err("Unable to register notify handler - %d\n",
+ status);
+ err = -ENODEV;
+ goto error_wmi;
+ }
+
+ return 0;
+
+error_wmi:
+ eeepc_wmi_backlight_exit(eeepc);
+error_backlight:
+ eeepc_wmi_input_exit(eeepc);
+error_input:
+ return err;
+}
+
+static int __devexit eeepc_wmi_platform_remove(struct platform_device *device)
+{
+ struct eeepc_wmi *eeepc;
+
+ eeepc = platform_get_drvdata(device);
+ wmi_remove_notify_handler(EEEPC_WMI_EVENT_GUID);
+ eeepc_wmi_backlight_exit(eeepc);
+ eeepc_wmi_input_exit(eeepc);
+
+ return 0;
+}
+
+static struct platform_driver platform_driver = {
+ .driver = {
+ .name = EEEPC_WMI_FILE,
+ .owner = THIS_MODULE,
+ },
+ .probe = eeepc_wmi_platform_probe,
+ .remove = __devexit_p(eeepc_wmi_platform_remove),
+};
+
+static int __init eeepc_wmi_init(void)
+{
+ struct eeepc_wmi *eeepc;
+ int err;
+
+ if (!wmi_has_guid(EEEPC_WMI_EVENT_GUID) ||
+ !wmi_has_guid(EEEPC_WMI_MGMT_GUID)) {
+ pr_warning("No known WMI GUID found\n");
+ return -ENODEV;
+ }
+
+ eeepc = kzalloc(sizeof(struct eeepc_wmi), GFP_KERNEL);
+ if (!eeepc)
+ return -ENOMEM;
+
+ platform_device = platform_device_alloc(EEEPC_WMI_FILE, -1);
+ if (!platform_device) {
+ pr_warning("Unable to allocate platform device\n");
+ err = -ENOMEM;
+ goto fail_platform;
+ }
+
+ err = platform_device_add(platform_device);
+ if (err) {
+ pr_warning("Unable to add platform device\n");
+ goto put_dev;
+ }
+
+ platform_set_drvdata(platform_device, eeepc);
+
+ err = platform_driver_register(&platform_driver);
+ if (err) {
+ pr_warning("Unable to register platform driver\n");
+ goto del_dev;
+ }
+
+ return 0;
+
+del_dev:
+ platform_device_del(platform_device);
+put_dev:
+ platform_device_put(platform_device);
+fail_platform:
+ kfree(eeepc);
+
+ return err;
+}
+
+static void __exit eeepc_wmi_exit(void)
+{
+ struct eeepc_wmi *eeepc;
+
+ eeepc = platform_get_drvdata(platform_device);
+ platform_driver_unregister(&platform_driver);
+ platform_device_unregister(platform_device);
+ kfree(eeepc);
+}
+
+module_init(eeepc_wmi_init);
+module_exit(eeepc_wmi_exit);
#include <linux/kfifo.h>
#include <linux/video_output.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
#include <linux/leds.h>
#endif
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/input.h>
#include <acpi/acpi_drivers.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/pm.h>
if (!attr)
return -ENOMEM;
+ sysfs_attr_init(&attr->attr.attr); /* That is consistent naming :D */
attr->attr.attr.name = name;
attr->attr.attr.mode = mode;
attr->attr.show = show;
#include <linux/input/sparse-keymap.h>
#include <linux/acpi.h>
#include <linux/backlight.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>");
MODULE_DESCRIPTION("MSI laptop WMI hotkeys driver");
#include <linux/ctype.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/input.h>
#include <linux/kfifo.h>
#include <linux/workqueue.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <acpi/acpi.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/nvram.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/rfkill.h>
#include <linux/input.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/acpi.h>
+#include <linux/slab.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/isapnp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pnp.h>
-#include <linux/slab.h>
#include <linux/bitmap.h>
#include <linux/mutex.h>
#include "base.h"
#include <linux/acpi.h>
#include <linux/pnp.h>
+#include <linux/slab.h>
#include <linux/mod_devicetable.h>
#include <acpi/acpi_bus.h>
#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/pnp.h>
+#include <linux/slab.h>
#include "../base.h"
#include "pnpacpi.h"
struct acpi_resource_address64 addr, *p = &addr;
acpi_status status;
int window;
+ u64 len;
status = acpi_resource_to_address64(res, p);
if (!ACPI_SUCCESS(status)) {
return;
}
+ /* Windows apparently computes length rather than using _LEN */
+ len = p->maximum - p->minimum + 1;
window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
if (p->resource_type == ACPI_MEMORY_RANGE)
- pnpacpi_parse_allocated_memresource(dev,
- p->minimum, p->address_length,
+ pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
p->info.mem.write_protect, window);
else if (p->resource_type == ACPI_IO_RANGE)
- pnpacpi_parse_allocated_ioresource(dev,
- p->minimum, p->address_length,
+ pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
p->granularity == 0xfff ? ACPI_DECODE_10 :
ACPI_DECODE_16, window);
else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
- pnpacpi_parse_allocated_busresource(dev, p->minimum,
- p->address_length);
+ pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
}
static void pnpacpi_parse_allocated_ext_address_space(struct pnp_dev *dev,
{
struct acpi_resource_extended_address64 *p = &res->data.ext_address64;
int window;
+ u64 len;
+ /* Windows apparently computes length rather than using _LEN */
+ len = p->maximum - p->minimum + 1;
window = (p->producer_consumer == ACPI_PRODUCER) ? 1 : 0;
if (p->resource_type == ACPI_MEMORY_RANGE)
- pnpacpi_parse_allocated_memresource(dev,
- p->minimum, p->address_length,
+ pnpacpi_parse_allocated_memresource(dev, p->minimum, len,
p->info.mem.write_protect, window);
else if (p->resource_type == ACPI_IO_RANGE)
- pnpacpi_parse_allocated_ioresource(dev,
- p->minimum, p->address_length,
+ pnpacpi_parse_allocated_ioresource(dev, p->minimum, len,
p->granularity == 0xfff ? ACPI_DECODE_10 :
ACPI_DECODE_16, window);
else if (p->resource_type == ACPI_BUS_NUMBER_RANGE)
- pnpacpi_parse_allocated_busresource(dev, p->minimum,
- p->address_length);
+ pnpacpi_parse_allocated_busresource(dev, p->minimum, len);
}
static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
#include <linux/pnp.h>
#include <linux/mm.h>
#include <linux/smp.h>
-#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/completion.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
#include <linux/pnp.h>
#include <linux/string.h>
-#include <linux/slab.h>
#ifdef CONFIG_PCI
#include <linux/pci.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
if (tres->flags & IORESOURCE_IO) {
if (cannot_compare(tres->flags))
continue;
+ if (tres->flags & IORESOURCE_WINDOW)
+ continue;
tport = &tres->start;
tend = &tres->end;
if (ranged_conflict(port, end, tport, tend))
if (tres->flags & IORESOURCE_MEM) {
if (cannot_compare(tres->flags))
continue;
+ if (tres->flags & IORESOURCE_WINDOW)
+ continue;
taddr = &tres->start;
tend = &tres->end;
if (ranged_conflict(addr, end, taddr, tend))
#include <linux/power_supply.h>
#include <linux/idr.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#define DRIVER_VERSION "1.1.0"
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/workqueue.h>
#include <linux/pm.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/i2c.h>
#include <linux/idr.h>
#include <linux/power_supply.h>
+#include <linux/slab.h>
#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
#include <linux/delay.h>
#include <linux/power_supply.h>
#include <linux/max17040_battery.h>
+#include <linux/slab.h>
#define MAX17040_VCELL_MSB 0x02
#define MAX17040_VCELL_LSB 0x03
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/device.h>
#include <linux/power_supply.h>
#include <linux/adb.h>
#include <linux/pmu.h>
+#include <linux/slab.h>
static struct pmu_battery_dev {
struct power_supply bat;
#include <linux/kernel.h>
#include <linux/power_supply.h>
+#include <linux/slab.h>
#include "power_supply.h"
#include <linux/ctype.h>
#include <linux/power_supply.h>
+#include <linux/slab.h>
#include "power_supply.h"
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/auxadc.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/auxadc.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/slab.h>
static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
#include <linux/idr.h>
#include <linux/fs.h>
#include <linux/pps_kernel.h>
+#include <linux/slab.h>
/*
* Global variables
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/notifier.h>
#include <linux/ioctl.h>
#include <linux/fb.h>
+#include <linux/slab.h>
#include <asm/firmware.h>
#include <asm/ps3av.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/suspend.h>
goto overflow_err;
regulator->dev = dev;
+ sysfs_attr_init(®ulator->dev_attr.attr);
regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
if (regulator->dev_attr.attr.name == NULL)
goto attr_name_err;
#include <linux/regulator/fixed.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/slab.h>
struct fixed_voltage_data {
struct regulator_desc desc;
#include <linux/kernel.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/lp3971.h>
+#include <linux/slab.h>
struct lp3971 {
struct device *dev;
LP3971_BUCK2 -> 4
LP3971_BUCK3 -> 6
*/
-#define BUCK_VOL_CHANGE_SHIFT(x) (((1 << x) & ~0x01) << 1)
+#define BUCK_VOL_CHANGE_SHIFT(x) (((!!x) << 2) | (x & ~0x01))
#define BUCK_VOL_CHANGE_FLAG_GO 0x01
#define BUCK_VOL_CHANGE_FLAG_TARGET 0x02
#define BUCK_VOL_CHANGE_FLAG_MASK 0x03
return -EINVAL;
return lp3971_set_bits(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo),
- LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo), val);
+ LDO_VOL_CONTR_MASK << LDO_VOL_CONTR_SHIFT(ldo),
+ val << LDO_VOL_CONTR_SHIFT(ldo));
}
static struct regulator_ops lp3971_ldo_ops = {
lp3971->num_regulators = pdata->num_regulators;
lp3971->rdev = kcalloc(pdata->num_regulators,
sizeof(struct regulator_dev *), GFP_KERNEL);
+ if (!lp3971->rdev) {
+ err = -ENOMEM;
+ goto err_nomem;
+ }
/* Instantiate the regulators */
for (i = 0; i < pdata->num_regulators; i++) {
regulator_unregister(lp3971->rdev[i]);
kfree(lp3971->rdev);
lp3971->rdev = NULL;
+err_nomem:
return err;
}
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/slab.h>
#include <linux/regulator/max1586.h>
#define MAX1586_V3_MAX_VSEL 31
for (i = 0; i <= MAX1586_V6; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
- kfree(rdev);
i2c_set_clientdata(client, NULL);
+ kfree(rdev);
return 0;
}
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/slab.h>
#include <linux/regulator/max8649.h>
#define MAX8649_DCDC_VMIN 750000 /* uV */
dev_info(info->dev, "Max8649 regulator device is detected.\n");
return 0;
out:
+ i2c_set_clientdata(client, NULL);
kfree(info);
return ret;
}
if (info) {
if (info->regulator)
regulator_unregister(info->regulator);
+ i2c_set_clientdata(client, NULL);
kfree(info);
}
- i2c_set_clientdata(client, NULL);
return 0;
}
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/slab.h>
#include <linux/regulator/max8660.h>
#define MAX8660_DCDC_MIN_UV 725000
for (i = 0; i < MAX8660_V_END; i++)
if (rdev[i])
regulator_unregister(rdev[i]);
- kfree(rdev);
i2c_set_clientdata(client, NULL);
+ kfree(rdev);
return 0;
}
struct max8925_regulator_info *info = rdev_get_drvdata(rdev);
int ret;
- ret = max8925_reg_read(info->i2c, info->vol_reg);
+ ret = max8925_reg_read(info->i2c, info->enable_reg);
if (ret < 0)
return ret;
MAX8925_LDO(20, 750, 3900, 50),
};
-static inline struct max8925_regulator_info *find_regulator_info(int id)
+static struct max8925_regulator_info * __devinit find_regulator_info(int id)
{
struct max8925_regulator_info *ri;
int i;
{
struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct max8925_platform_data *pdata = chip->dev->platform_data;
- struct max8925_regulator_info *ri = NULL;
+ struct max8925_regulator_info *ri;
struct regulator_dev *rdev;
ri = find_regulator_info(pdev->id);
{
struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, NULL);
regulator_unregister(rdev);
+
return 0;
}
#include <linux/regulator/driver.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
dev_get_platdata(&pdev->dev);
int i;
+ platform_set_drvdata(pdev, NULL);
+
for (i = 0; i < pdata->num_regulators; i++)
regulator_unregister(priv->regulators[i]);
+ kfree(priv);
return 0;
}
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/slab.h>
/* Register definitions */
#define TPS65023_REG_VERSION 0
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/slab.h>
/* Register definitions */
#define TPS6507X_REG_PPATH1 0X01
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/userspace-consumer.h>
+#include <linux/slab.h>
struct userspace_consumer_data {
const char *name;
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
struct virtual_consumer_data {
struct mutex lock;
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/regulator.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/regulator.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/regulator.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/rtc.h>
#include <linux/kdev_t.h>
#include <linux/idr.h>
+#include <linux/slab.h>
#include "rtc-core.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/io.h>
#include <linux/rtc.h>
#include <linux/interrupt.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <mach/board.h>
#include <mach/at91_rtt.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/blackfin.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
MODULE_DESCRIPTION("TI BQ4802 RTC driver");
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
/*
* Registers in the COH 901 331
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#define DRV_VERSION "0.2"
#include <linux/bcd.h>
#include <linux/ds1286.h>
#include <linux/io.h>
+#include <linux/slab.h>
#define DRV_VERSION "1.0"
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/workqueue.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#define DS1374_REG_TOD0 0x00 /* Time of Day */
#define DS1374_REG_TOD1 0x01
#include <linux/rtc.h>
#include <linux/spi/spi.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#define DS1390_REG_100THS 0x00
#define DS1390_REG_SECONDS 0x01
#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/rtc.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#define EP93XX_RTC_DATA 0x000
#define EP93XX_RTC_MATCH 0x004
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#define FM3130_RTC_CONTROL (0x0)
#define FM3130_CAL_CONTROL (0x1)
#include <linux/module.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/bcd.h>
#include <linux/io.h>
#include <linux/rtc.h>
#include <linux/rtc/m48t59.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#ifndef NO_IRQ
#define NO_IRQ (-1)
#include <linux/module.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
#include <linux/mfd/max8925.h>
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#define DRIVER_NAME "mc13783-rtc"
{
int ret;
struct mc13783_rtc *priv;
+ struct mc13783 *mc13783;
int rtcrst_pending;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
- priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+ mc13783 = dev_get_drvdata(pdev->dev.parent);
+ priv->mc13783 = mc13783;
+
platform_set_drvdata(pdev, priv);
- mc13783_lock(priv->mc13783);
+ mc13783_lock(mc13783);
- ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_RTCRST,
+ ret = mc13783_irq_request(mc13783, MC13783_IRQ_RTCRST,
mc13783_rtc_reset_handler, DRIVER_NAME, priv);
if (ret)
goto err_reset_irq_request;
- ret = mc13783_irq_status(priv->mc13783, MC13783_IRQ_RTCRST,
+ ret = mc13783_irq_status(mc13783, MC13783_IRQ_RTCRST,
NULL, &rtcrst_pending);
if (ret)
goto err_reset_irq_status;
priv->valid = !rtcrst_pending;
- ret = mc13783_irq_request_nounmask(priv->mc13783, MC13783_IRQ_1HZ,
+ ret = mc13783_irq_request_nounmask(mc13783, MC13783_IRQ_1HZ,
mc13783_rtc_update_handler, DRIVER_NAME, priv);
if (ret)
goto err_update_irq_request;
- ret = mc13783_irq_request_nounmask(priv->mc13783, MC13783_IRQ_TODA,
+ ret = mc13783_irq_request_nounmask(mc13783, MC13783_IRQ_TODA,
mc13783_rtc_alarm_handler, DRIVER_NAME, priv);
if (ret)
goto err_alarm_irq_request;
if (IS_ERR(priv->rtc)) {
ret = PTR_ERR(priv->rtc);
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_TODA, priv);
+ mc13783_irq_free(mc13783, MC13783_IRQ_TODA, priv);
err_alarm_irq_request:
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_1HZ, priv);
+ mc13783_irq_free(mc13783, MC13783_IRQ_1HZ, priv);
err_update_irq_request:
err_reset_irq_status:
- mc13783_irq_free(priv->mc13783, MC13783_IRQ_RTCRST, priv);
+ mc13783_irq_free(mc13783, MC13783_IRQ_RTCRST, priv);
err_reset_irq_request:
platform_set_drvdata(pdev, NULL);
kfree(priv);
}
- mc13783_unlock(priv->mc13783);
+ mc13783_unlock(mc13783);
return ret;
}
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/io.h>
+#include <linux/slab.h>
struct mpc5121_rtc_regs {
u8 set_time; /* RTC + 0x00 */
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
enum {
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#define RTC_TIME_REG_OFFS 0
#include <linux/io.h>
#include <linux/rtc.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
struct rtc_device *rtc;
struct rtc_plat_data *pdata = NULL;
u32 reg;
- int ret, rate;
+ unsigned long rate;
+ int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
- pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- pdata->ioaddr = ioremap(res->start, resource_size(res));
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name))
+ return -EBUSY;
+
+ pdata->ioaddr = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
clk = clk_get(&pdev->dev, "ckil");
if (IS_ERR(clk)) {
- iounmap(pdata->ioaddr);
ret = PTR_ERR(clk);
goto exit_free_pdata;
}
else if (rate == 38400)
reg = RTC_INPUT_CLK_38400HZ;
else {
- dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n",
- clk_get_rate(clk));
+ dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
ret = -EINVAL;
goto exit_free_pdata;
}
pdata->irq = platform_get_irq(pdev, 0);
if (pdata->irq >= 0 &&
- request_irq(pdata->irq, mxc_rtc_interrupt, IRQF_SHARED,
- pdev->name, pdev) < 0) {
+ devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
+ IRQF_SHARED, pdev->name, pdev) < 0) {
dev_warn(&pdev->dev, "interrupt not available.\n");
pdata->irq = -1;
}
return 0;
exit_put_clk:
+ clk_disable(pdata->clk);
clk_put(pdata->clk);
exit_free_pdata:
- kfree(pdata);
return ret;
}
rtc_device_unregister(pdata->rtc);
- if (pdata->irq >= 0)
- free_irq(pdata->irq, pdev);
-
clk_disable(pdata->clk);
clk_put(pdata->clk);
- kfree(pdata);
platform_set_drvdata(pdev, NULL);
return 0;
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/mfd/ezx-pcap.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
struct pcap_rtc {
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/i2c.h>
#include <linux/bcd.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#define DRV_VERSION "0.4.3"
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <linux/slab.h>
#define RTC_DR (0)
#define RTC_MR (4)
#include <linux/bcd.h>
#include <linux/delay.h>
#include <linux/version.h>
+#include <linux/slab.h>
/*
* Register definitions
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
enum {
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
+#include <linux/slab.h>
#define DRV_VERSION "0.6"
*/
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bcd.h>
#include <linux/i2c.h>
#include <linux/bcd.h>
#include <linux/clk.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <asm/uaccess.h>
#include <linux/io.h>
#include <linux/log2.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <asm/rtc.h>
#define DRV_NAME "sh-rtc"
#include <linux/bcd.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#include <mach/platform.h>
#include <mach/stmp3xxx.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <asm/txx9/tx4939.h>
struct tx4939rtc_plat_data {
#include <linux/rtc-v3020.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/rtc.h>
+#include <linux/slab.h>
#include <linux/bcd.h>
#include <linux/interrupt.h>
#include <linux/ioctl.h>
/* Process requests that may be recovered */
if (cqr->status == DASD_CQR_NEED_ERP) {
erp_fn = base->discipline->erp_action(cqr);
- erp_fn(cqr);
+ if (IS_ERR(erp_fn(cqr)))
+ continue;
goto restart;
}
#define KMSG_COMPONENT "dasd-eckd"
#include <linux/timer.h>
-#include <linux/slab.h>
#include <asm/idals.h>
#define PRINTK_HEADER "dasd_erp(3990): "
if (cqr->cpmode == 1) {
cplength = 0;
- datasize = sizeof(struct tcw) + sizeof(struct tsb);
+ /* TCW needs to be 64 byte aligned, so leave enough room */
+ datasize = 64 + sizeof(struct tcw) + sizeof(struct tsb);
} else {
cplength = 2;
datasize = 0;
cqr->retries);
dasd_block_set_timer(device->block, (HZ << 3));
}
- return cqr;
+ return erp;
}
ccw = cqr->cpaddr;
if (cqr->cpmode == 1) {
/* make a shallow copy of the original tcw but set new tsb */
erp->cpmode = 1;
- erp->cpaddr = erp->data;
- tcw = erp->data;
+ erp->cpaddr = PTR_ALIGN(erp->data, 64);
+ tcw = erp->cpaddr;
tsb = (struct tsb *) &tcw[1];
*tcw = *((struct tcw *)cqr->cpaddr);
tcw->tsb = (long)tsb;
/* add erp and initialize with default TIC */
erp = dasd_3990_erp_add_erp(cqr);
+ if (IS_ERR(erp))
+ return erp;
+
/* inspect sense, determine specific ERP if possible */
if (erp != cqr) {
if (erp == NULL) {
/* no matching erp found - set up erp */
erp = dasd_3990_erp_additional_erp(cqr);
+ if (IS_ERR(erp))
+ return erp;
} else {
/* matching erp found - set all leading erp's to DONE */
erp = dasd_3990_erp_handle_match_erp(cqr, erp);
#define KMSG_COMPONENT "dasd-eckd"
#include <linux/list.h>
+#include <linux/slab.h>
#include <asm/ebcdic.h>
#include "dasd_int.h"
#include "dasd_eckd.h"
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
tsb = NULL;
sense = NULL;
- if (irb->scsw.tm.tcw)
+ if (irb->scsw.tm.tcw && (irb->scsw.tm.fcxs == 0x01))
tsb = tcw_get_tsb(
(struct tcw *)(unsigned long)irb->scsw.tm.tcw);
- if (tsb && (irb->scsw.tm.fcxs == 0x01)) {
+ if (tsb) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" tsb->length %d\n", tsb->length);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
#include <linux/mutex.h>
#include <linux/smp_lock.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/fs.h>
#include <linux/blkpg.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/compat.h>
#include <asm/ccwdev.h>
#include <asm/cmb.h>
#define KMSG_COMPONENT "dasd"
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/seq_file.h>
#include <linux/vmalloc.h>
#include <linux/ctype.h> /* isdigit, isxdigit */
#include <linux/errno.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/blkpg.h>
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/bio.h>
#include <linux/suspend.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#define XPRAM_NAME "xpram"
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/sysrq.h>
#include <linux/consolemap.h>
#include <linux/interrupt.h>
#include <linux/poll.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <net/iucv/iucv.h>
#include <asm/uaccess.h>
#include <asm/ebcdic.h>
#include <linux/poll.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
#include <linux/device.h>
#include <linux/stat.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/kmod.h>
#include <linux/err.h>
rc = copy_from_user(buf, buffer, sizeof(buf));
if (rc != 0)
return -EFAULT;
+ buf[sizeof(buf) - 1] = '\0';
if (strict_strtoul(buf, 0, &val) != 0)
return -EINVAL;
if (val != 0 && val != 1)
u16 rn;
} __packed;
+int arch_get_memory_phys_device(unsigned long start_pfn)
+{
+ if (!rzm)
+ return 0;
+ return PFN_PHYS(start_pfn) >> ilog2(rzm);
+}
+
static unsigned long long rn2addr(u16 rn)
{
return (unsigned long long) (rn - 1) * rzm;
return do_chp_configure(SCLP_CMDW_DECONFIGURE_CHPATH | chpid.id << 8);
}
-int arch_get_memory_phys_device(unsigned long start_pfn)
-{
- if (!rzm)
- return 0;
- return PFN_PHYS(start_pfn) / rzm;
-}
-
struct chp_info_sccb {
struct sccb_header header;
u8 recognized[SCLP_CHP_INFO_MASK_SIZE];
#include <linux/termios.h>
#include <linux/err.h>
#include <linux/reboot.h>
+#include <linux/gfp.h>
#include "sclp.h"
#include "sclp_rw.h"
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
-#include <linux/slab.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include "ctrlchar.h"
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/reboot.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "sclp.h"
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#define TAPE_DBF_AREA tape_34xx_dbf
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/bio.h>
#include <asm/ebcdic.h>
#define KMSG_COMPONENT "tape"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/slab.h>
+
#include "tape_class.h"
MODULE_AUTHOR("Stefan Bader <shbader@de.ibm.com>");
#include <linux/spinlock.h> // for locks
#include <linux/vmalloc.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <asm/types.h> // for variable types
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/compat.h>
#include <asm/cpcmd.h>
#include <asm/debug.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/cdev.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/watchdog.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/miscdevice.h>
#include <linux/debugfs.h>
#include <asm/asm-offsets.h>
return memcpy_hsa(dest, src, count, TO_KERNEL);
}
-static int memcpy_real(void *dest, unsigned long src, size_t count)
-{
- unsigned long flags;
- int rc = -EFAULT;
- register unsigned long _dest asm("2") = (unsigned long) dest;
- register unsigned long _len1 asm("3") = (unsigned long) count;
- register unsigned long _src asm("4") = src;
- register unsigned long _len2 asm("5") = (unsigned long) count;
-
- if (count == 0)
- return 0;
- flags = __raw_local_irq_stnsm(0xf8UL); /* switch to real mode */
- asm volatile (
- "0: mvcle %1,%2,0x0\n"
- "1: jo 0b\n"
- " lhi %0,0x0\n"
- "2:\n"
- EX_TABLE(1b,2b)
- : "+d" (rc), "+d" (_dest), "+d" (_src), "+d" (_len1),
- "+d" (_len2), "=m" (*((long*)dest))
- : "m" (*((long*)src))
- : "cc", "memory");
- __raw_local_irq_ssm(flags);
-
- return rc;
-}
-
static int memcpy_real_user(void __user *dest, unsigned long src, size_t count)
{
static char buf[4096];
while (offs < count) {
size = min(sizeof(buf), count - offs);
- if (memcpy_real(buf, src + offs, size))
+ if (memcpy_real(buf, (void *) src + offs, size))
return -EFAULT;
if (copy_to_user(dest + offs, buf, size))
return -EFAULT;
if (ipib_info.ipib < ZFCPDUMP_HSA_SIZE)
rc = memcpy_hsa_kernel(ipl_block, ipib_info.ipib, PAGE_SIZE);
else
- rc = memcpy_real(ipl_block, ipib_info.ipib, PAGE_SIZE);
- if (rc) {
- free_page((unsigned long) ipl_block);
- return rc;
- }
- if (csum_partial(ipl_block, ipl_block->hdr.len, 0) !=
+ rc = memcpy_real(ipl_block, (void *) ipib_info.ipib, PAGE_SIZE);
+ if (rc || csum_partial(ipl_block, ipl_block->hdr.len, 0) !=
ipib_info.checksum) {
TRACE("Checksum does not match\n");
free_page((unsigned long) ipl_block);
#include <linux/init.h>
#include <linux/vmalloc.h>
-#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/ctype.h>
#include <linux/wait.h>
#include <linux/mutex.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <asm/chpid.h>
#include <asm/sclp.h>
#include <asm/crw.h>
#include "chsc.h"
static void *sei_page;
+static DEFINE_SPINLOCK(sda_lock);
/**
* chsc_error_from_response() - convert a chsc response to an error
kfree(sei_page);
}
-int __init
-chsc_enable_facility(int operation_code)
+int chsc_enable_facility(int operation_code)
{
int ret;
- struct {
+ static struct {
struct chsc_header request;
u8 reserved1:4;
u8 format:4;
u32 reserved5:4;
u32 format2:4;
u32 reserved6:24;
- } __attribute__ ((packed)) *sda_area;
+ } __attribute__ ((packed, aligned(4096))) sda_area;
- sda_area = (void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
- if (!sda_area)
- return -ENOMEM;
- sda_area->request.length = 0x0400;
- sda_area->request.code = 0x0031;
- sda_area->operation_code = operation_code;
+ spin_lock(&sda_lock);
+ memset(&sda_area, 0, sizeof(sda_area));
+ sda_area.request.length = 0x0400;
+ sda_area.request.code = 0x0031;
+ sda_area.operation_code = operation_code;
- ret = chsc(sda_area);
+ ret = chsc(&sda_area);
if (ret > 0) {
ret = (ret == 3) ? -ENODEV : -EBUSY;
goto out;
}
- switch (sda_area->response.code) {
+ switch (sda_area.response.code) {
case 0x0101:
ret = -EOPNOTSUPP;
break;
default:
- ret = chsc_error_from_response(sda_area->response.code);
+ ret = chsc_error_from_response(sda_area.response.code);
}
if (ret != 0)
CIO_CRW_EVENT(2, "chsc: sda (oc=%x) failed (rc=%04x)\n",
- operation_code, sda_area->response.code);
+ operation_code, sda_area.response.code);
out:
- free_page((unsigned long)sda_area);
+ spin_unlock(&sda_lock);
return ret;
}
*
*/
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/uaccess.h>
* since we don't have a way to clear the subchannel and
* cannot disable it with a request running.
*/
- cc = stsch(sch->schid, &schib);
+ cc = stsch_err(sch->schid, &schib);
if (!cc && scsw_stctl(&schib.scsw))
return -EAGAIN;
return 0;
struct schib schib;
int ccode, retry, ret = 0;
- if (stsch(sch->schid, &schib) || !css_sch_is_valid(&schib))
+ if (stsch_err(sch->schid, &schib) || !css_sch_is_valid(&schib))
return -ENODEV;
for (retry = 0; retry < 5; retry++) {
return ccode;
switch (ccode) {
case 0: /* successful */
- if (stsch(sch->schid, &schib) ||
+ if (stsch_err(sch->schid, &schib) ||
!css_sch_is_valid(&schib))
return -ENODEV;
if (cio_check_config(sch, &schib)) {
{
struct schib schib;
- if (stsch(sch->schid, &schib) || !css_sch_is_valid(&schib))
+ if (stsch_err(sch->schid, &schib) || !css_sch_is_valid(&schib))
return -ENODEV;
memcpy(&sch->schib, &schib, sizeof(schib));
if (console_irq != -1) {
/* VM provided us with the irq number of the console. */
schid.sch_no = console_irq;
- if (stsch(schid, &console_subchannel.schib) != 0 ||
+ if (stsch_err(schid, &console_subchannel.schib) != 0 ||
(console_subchannel.schib.pmcw.st != SUBCHANNEL_TYPE_IO) ||
!console_subchannel.schib.pmcw.dnv)
return -1;
cc = 0;
for (retry=0;retry<3;retry++) {
schib->pmcw.ena = 0;
- cc = msch(schid, schib);
+ cc = msch_err(schid, schib);
if (cc)
return (cc==3?-ENODEV:-EBUSY);
- if (stsch(schid, schib) || !css_sch_is_valid(schib))
+ if (stsch_err(schid, schib) || !css_sch_is_valid(schib))
return -ENODEV;
if (!schib->pmcw.ena)
return 0;
pgm_check_occured = 0;
s390_base_pgm_handler_fn = cio_reset_pgm_check_handler;
- rc = stsch(schid, addr);
+ rc = stsch_err(schid, addr);
s390_base_pgm_handler_fn = NULL;
/* The program check handler could have changed pgm_check_occured. */
/* No default clear strategy */
break;
}
- stsch(schid, &schib);
+ stsch_err(schid, &schib);
__disable_subchannel_easy(schid, &schib);
}
out:
schid = *(struct subchannel_id *)&S390_lowcore.subchannel_id;
if (!schid.one)
return -ENODEV;
- if (stsch(schid, &schib))
+ if (stsch_err(schid, &schib))
return -ENODEV;
if (schib.pmcw.st != SUBCHANNEL_TYPE_IO)
return -ENODEV;
/* Try to enable MSS. */
ret = chsc_enable_facility(CHSC_SDA_OC_MSS);
- switch (ret) {
- case 0: /* Success. */
- max_ssid = __MAX_SSID;
- break;
- case -ENOMEM:
- goto out;
- default:
+ if (ret)
max_ssid = 0;
- }
+ else /* Success. */
+ max_ssid = __MAX_SSID;
ret = slow_subchannel_init();
if (ret)
}
subsys_initcall_sync(channel_subsystem_init_sync);
+void channel_subsystem_reinit(void)
+{
+ chsc_enable_facility(CHSC_SDA_OC_MSS);
+}
+
#ifdef CONFIG_PROC_FS
static ssize_t cio_settle_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
sch = to_subchannel(cdev->dev.parent);
private = to_io_private(sch);
orb = &private->orb;
- cc = stsch(sch->schid, &schib);
+ cc = stsch_err(sch->schid, &schib);
printk(KERN_WARNING "cio: ccw device timeout occurred at %llx, "
"device information:\n", get_clock());
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/atomic.h>
#include <asm/debug.h>
#include <asm/qdio.h>
* Jan Glauber <jang@linux.vnet.ibm.com>
*/
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/debug.h>
#include <asm/qdio.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <linux/compat.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
#include <linux/hw_random.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <asm/atomic.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/err.h>
#include <asm/atomic.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/err.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
#include <linux/err.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
+#include <linux/slab.h>
#include <linux/virtio_console.h>
#include <linux/interrupt.h>
#include <linux/virtio_ring.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/sysctl.h>
#include <linux/module.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include "ctcm_main.h"
/*
#include "fsm.h"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/timer.h>
MODULE_AUTHOR("(C) 2000 IBM Corp. by Fritz Elfert (felfert@millenux.com)");
#include <linux/igmp.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/ip.h>
#include <linux/tcp.h>
#include <linux/mii.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/etherdevice.h>
#include <linux/mii.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/inetdevice.h>
#include <linux/igmp.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/arp.h>
* Frank Blaschka <frank.blaschka@de.ibm.com>
*/
+#include <linux/slab.h>
+
#include "qeth_l3.h"
#define QETH_DEVICE_ATTR(_id, _name, _mode, _show, _store) \
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <net/iucv/iucv.h>
#include <asm/cpcmd.h>
#include <asm/ebcdic.h>
#include <linux/list.h>
#include <linux/kobject.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <net/iucv/iucv.h>
#include <linux/miscdevice.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "zfcp_ext.h"
#include "zfcp_fc.h"
#include "zfcp_reqlist.h"
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/miscdevice.h>
#include <asm/compat.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <asm/debug.h>
#include "zfcp_dbf.h"
#include "zfcp_ext.h"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/types.h>
+#include <linux/slab.h>
#include <scsi/fc/fc_els.h>
#include <scsi/libfc.h>
#include "zfcp_ext.h"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/blktrace_api.h>
+#include <linux/slab.h>
#include <scsi/fc/fc_els.h>
#include "zfcp_ext.h"
#include "zfcp_fc.h"
blktrc.inb_usage = req->qdio_req.qdio_inb_usage;
blktrc.outb_usage = req->qdio_req.qdio_outb_usage;
- if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA) {
+ if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA &&
+ !(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
blktrc.flags |= ZFCP_BLK_LAT_VALID;
blktrc.channel_lat = lat_in->channel_lat * ticks;
blktrc.fabric_lat = lat_in->fabric_lat * ticks;
fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
zfcp_fc_eval_fcp_rsp(fcp_rsp, scpnt);
- zfcp_fsf_req_trace(req, scpnt);
-
skip_fsfstatus:
+ zfcp_fsf_req_trace(req, scpnt);
zfcp_dbf_scsi_result(req->adapter->dbf, scpnt, req);
scpnt->host_scribble = NULL;
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/slab.h>
#include "zfcp_ext.h"
#include "zfcp_qdio.h"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/types.h>
+#include <linux/slab.h>
#include <scsi/fc/fc_fcp.h>
#include <asm/atomic.h>
#include "zfcp_ext.h"
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/slab.h>
#include "zfcp_ext.h"
#define ZFCP_DEV_ATTR(_feat, _name, _mode, _show, _store) \
#include <linux/kmod.h>
#include <linux/reboot.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <linux/of_device.h>
#include <asm/oplib.h>
#include <linux/init.h>
#include <linux/miscdevice.h>
#include <linux/ioport.h> /* request_region */
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/miscdevice.h>
#include <linux/kmod.h>
#include <linux/reboot.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
-#include <linux/slab.h>
#include <linux/fcntl.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
-#include <linux/slab.h>
#include <linux/fcntl.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/time.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/time.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/spinlock.h>
#include <linux/jiffies.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <scsi/scsicam.h>
#include <asm/dma.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mca.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mca.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <linux/types.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <scsi/scsi_host.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
-#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
-#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/completion.h>
BUG_ON((unsigned long)asc_dvc->overrun_buf & 7);
asc_dvc->overrun_dma = dma_map_single(board->dev, asc_dvc->overrun_buf,
ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
+ if (dma_mapping_error(board->dev, asc_dvc->overrun_dma)) {
+ warn_code = -ENOMEM;
+ goto err_dma_map;
+ }
phy_addr = cpu_to_le32(asc_dvc->overrun_dma);
AscMemDWordCopyPtrToLram(iop_base, ASCV_OVERRUN_PADDR_D,
(uchar *)&phy_addr, 1);
AscSetPCAddr(iop_base, ASC_MCODE_START_ADDR);
if (AscGetPCAddr(iop_base) != ASC_MCODE_START_ADDR) {
asc_dvc->err_code |= ASC_IERR_SET_PC_ADDR;
- return warn_code;
+ warn_code = UW_ERR;
+ goto err_mcode_start;
}
if (AscStartChip(iop_base) != 1) {
asc_dvc->err_code |= ASC_IERR_START_STOP_CHIP;
- return warn_code;
+ warn_code = UW_ERR;
+ goto err_mcode_start;
}
return warn_code;
+
+err_mcode_start:
+ dma_unmap_single(board->dev, asc_dvc->overrun_dma,
+ ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
+err_dma_map:
+ asc_dvc->overrun_dma = 0;
+ return warn_code;
}
static ushort AscInitAsc1000Driver(ASC_DVC_VAR *asc_dvc)
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code |= ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
}
release_firmware(fw);
warn_code |= AscInitMicroCodeVar(asc_dvc);
+ if (!asc_dvc->overrun_dma)
+ return warn_code;
asc_dvc->init_state |= ASC_INIT_STATE_END_LOAD_MC;
AscEnableInterrupt(iop_base);
return warn_code;
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
if (err) {
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
fwname, err);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return err;
}
if (fw->size < 4) {
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
fw->size, fwname);
release_firmware(fw);
+ asc_dvc->err_code = ASC_IERR_MCODE_CHKSUM;
return -EINVAL;
}
chksum = (fw->data[3] << 24) | (fw->data[2] << 16) |
status = AscInitAsc1000Driver(asc_dvc);
/* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
- if (asc_dvc->err_code) {
+ if (asc_dvc->err_code || !asc_dvc->overrun_dma) {
scmd_printk(KERN_INFO, scp, "SCSI bus reset error: "
- "0x%x\n", asc_dvc->err_code);
+ "0x%x, status: 0x%x\n", asc_dvc->err_code,
+ status);
ret = FAILED;
} else if (status) {
scmd_printk(KERN_INFO, scp, "SCSI bus reset warning: "
asc_dvc_varp->overrun_buf = kzalloc(ASC_OVERRUN_BSIZE, GFP_KERNEL);
if (!asc_dvc_varp->overrun_buf) {
ret = -ENOMEM;
- goto err_free_wide_mem;
+ goto err_free_irq;
}
warn_code = AscInitAsc1000Driver(asc_dvc_varp);
"warn 0x%x, error 0x%x\n",
asc_dvc_varp->init_state, warn_code,
asc_dvc_varp->err_code);
- if (asc_dvc_varp->err_code) {
+ if (!asc_dvc_varp->overrun_dma) {
ret = -ENODEV;
- kfree(asc_dvc_varp->overrun_buf);
+ goto err_free_mem;
}
}
} else {
- if (advansys_wide_init_chip(shost))
+ if (advansys_wide_init_chip(shost)) {
ret = -ENODEV;
+ goto err_free_mem;
+ }
}
- if (ret)
- goto err_free_wide_mem;
-
ASC_DBG_PRT_SCSI_HOST(2, shost);
ret = scsi_add_host(shost, boardp->dev);
if (ret)
- goto err_free_wide_mem;
+ goto err_free_mem;
scsi_scan_host(shost);
return 0;
- err_free_wide_mem:
- advansys_wide_free_mem(boardp);
+ err_free_mem:
+ if (ASC_NARROW_BOARD(boardp)) {
+ if (asc_dvc_varp->overrun_dma)
+ dma_unmap_single(boardp->dev, asc_dvc_varp->overrun_dma,
+ ASC_OVERRUN_BSIZE, DMA_FROM_DEVICE);
+ kfree(asc_dvc_varp->overrun_buf);
+ } else
+ advansys_wide_free_mem(boardp);
+ err_free_irq:
free_irq(boardp->irq, shost);
err_free_dma:
#ifdef CONFIG_ISA
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <scsi/scsicam.h>
#include "scsi.h"
#include <linux/blkdev.h>
#include <linux/mca.h>
#include <linux/mca-legacy.h>
+#include <linux/slab.h>
#include <asm/dma.h>
#include <asm/system.h>
#include <linux/device.h>
#include <linux/eisa.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <asm/dma.h>
#include <asm/system.h>
#include <linux/blkdev.h> /* For block_size() */
#include <linux/delay.h> /* For ssleep/msleep */
#include <linux/device.h>
+#include <linux/slab.h>
/*
* Bucket size for counting good commands in between bad ones.
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/blkdev.h> /* For block_size() */
#include <linux/delay.h> /* For ssleep/msleep */
+#include <linux/slab.h>
/*
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/firmware.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
*
*/
+#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include "aic94xx.h"
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "aic94xx.h"
*/
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/firmware.h>
*/
#include <linux/spinlock.h>
+#include <linux/gfp.h>
#include "aic94xx.h"
#include "aic94xx_sas.h"
#include "aic94xx_hwi.h"
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/aer.h>
+#include <linux/slab.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/system.h>
* interrupt or bottom half.
*/
+#include <linux/gfp.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
*/
#include <linux/reboot.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/pci.h>
SE_DEBUG(DBG_LVL_1,
"Failed to allocate memory for"
"mgmt_invalidate_icds \n");
+ spin_unlock(&ctrl->mbox_lock);
return -1;
}
nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
* bfad.c Linux driver PCI interface module.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include "bfad_drv.h"
* bfa_attr.c Linux driver configuration interface module.
*/
+#include <linux/slab.h>
#include "bfad_drv.h"
#include "bfad_im.h"
#include "bfad_trcmod.h"
* bfad_im.c Linux driver IM module.
*/
+#include <linux/slab.h>
#include "bfad_drv.h"
#include "bfad_im.h"
#include "bfad_trcmod.h"
* rport.c Remote port implementation.
*/
+#include <linux/slab.h>
#include <bfa.h>
#include <bfa_svc.h>
#include "fcbuild.h"
u32 num_ccell;
int ofld_conns_active;
+ wait_queue_head_t eh_wait;
int max_active_conns;
struct iscsi_cid_queue cid_que;
spinlock_t lock; /* protects hba structure access */
struct mutex net_dev_lock;/* sync net device access */
+ int hba_shutdown_tmo;
/*
* PCI related info.
*/
* Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
*/
+#include <linux/gfp.h>
#include <scsi/scsi_tcq.h>
#include <scsi/libiscsi.h>
#include "bnx2i.h"
struct bnx2i_hba *hba = handle;
/* check if cleanup happened in GOING_DOWN context */
- clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
&hba->adapter_state))
iscsi_host_for_each_session(hba->shost,
bnx2i_drop_session);
+
+ /* Wait for all endpoints to be torn down, Chip will be reset once
+ * control returns to network driver. So it is required to cleanup and
+ * release all connection resources before returning from this routine.
+ */
+ wait_event_interruptible_timeout(hba->eh_wait,
+ (hba->ofld_conns_active == 0),
+ hba->hba_shutdown_tmo);
+ /* This flag should be cleared last so that ep_disconnect() gracefully
+ * cleans up connection context
+ */
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
}
/**
* Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
*/
+#include <linux/slab.h>
#include <scsi/scsi_tcq.h>
#include <scsi/libiscsi.h>
#include "bnx2i.h"
spin_lock_init(&hba->lock);
mutex_init(&hba->net_dev_lock);
+ init_waitqueue_head(&hba->eh_wait);
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ hba->hba_shutdown_tmo = 240 * HZ;
+ else /* 5706/5708/5709 */
+ hba->hba_shutdown_tmo = 30 * HZ;
if (iscsi_host_add(shost, &hba->pcidev->dev))
goto free_dump_mem;
*/
hba = bnx2i_check_route(dst_addr);
- if (!hba) {
- rc = -ENOMEM;
+ if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+ rc = -EINVAL;
goto check_busy;
}
(bnx2i_ep->state ==
EP_STATE_CONNECT_COMPL)),
msecs_to_jiffies(timeout_ms));
- if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ if (bnx2i_ep->state == EP_STATE_OFLD_FAILED)
rc = -1;
if (rc > 0)
if (!hba->ofld_conns_active)
bnx2i_unreg_dev_all();
+
+ wake_up_interruptible(&hba->eh_wait);
}
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <asm/bvme6000hw.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <linux/mutex.h>
#include <linux/idr.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
* Written by: Karen Xie (kxie@chelsio.com)
*/
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/scatterlist.h>
#ifndef __CXGB3I_ULP2_DDP_H__
#define __CXGB3I_ULP2_DDP_H__
+#include <linux/slab.h>
#include <linux/vmalloc.h>
/**
*/
#include <linux/inet.h>
+#include <linux/slab.h>
#include <linux/crypto.h>
#include <linux/if_vlan.h>
#include <net/dst.h>
*/
#include <linux/if_vlan.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include "cxgb3_defs.h"
* Written by: Karen Xie (kxie@chelsio.com)
*/
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/crypto.h>
#include <scsi/scsi_cmnd.h>
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <scsi/scsi.h>
* Mike Anderson <andmike@linux.vnet.ibm.com>
*/
+#include <linux/slab.h>
#include <scsi/scsi_dh.h>
#include "../scsi_priv.h"
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#define RDAC_NAME "rdac"
#define RDAC_RETRY_COUNT 5
static int adpt_detect(struct scsi_host_template* sht)
{
struct pci_dev *pDev = NULL;
- adpt_hba* pHba;
+ adpt_hba *pHba;
+ adpt_hba *next;
PINFO("Detecting Adaptec I2O RAID controllers...\n");
}
/* In INIT state, Activate IOPs */
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
// Activate does get status , init outbound, and get hrt
if (adpt_i2o_activate_hba(pHba) < 0) {
adpt_i2o_delete_hba(pHba);
PDEBUG("HBA's in OPERATIONAL state\n");
printk("dpti: If you have a lot of devices this could take a few minutes.\n");
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
printk(KERN_INFO"%s: Reading the hardware resource table.\n", pHba->name);
if (adpt_i2o_lct_get(pHba) < 0){
adpt_i2o_delete_hba(pHba);
adpt_sysfs_class = NULL;
}
- for (pHba = hba_chain; pHba; pHba = pHba->next) {
+ for (pHba = hba_chain; pHba; pHba = next) {
+ next = pHba->next;
if (adpt_scsi_host_alloc(pHba, sht) < 0){
adpt_i2o_delete_hba(pHba);
continue;
}
}
pci_dev_put(pHba->pDev);
- kfree(pHba);
-
if (adpt_sysfs_class)
device_destroy(adpt_sysfs_class,
MKDEV(DPTI_I2O_MAJOR, pHba->unit));
+ kfree(pHba);
if(hba_count <= 0){
unregister_chrdev(DPTI_I2O_MAJOR, DPT_DRIVER);
#include <linux/ctype.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
-#include <linux/slab.h>
#include <linux/in.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/fs.h>
#include <linux/sysfs.h>
#include <linux/if_vlan.h>
#include <linux/errno.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <net/rtnetlink.h>
#include <scsi/fc/fc_els.h>
#include <linux/delay.h>
#include <linux/mca.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <scsi/scsicam.h>
#include <linux/mca-legacy.h>
#include <linux/stat.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <scsi/scsicam.h>
#include <asm/system.h>
*/
#include <linux/errno.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/mempool.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/if_ether.h>
+#include <linux/slab.h>
#include "vnic_resource.h"
#include "vnic_devcmd.h"
#include "vnic_dev.h"
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "vnic_dev.h"
#include "vnic_rq.h"
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "vnic_dev.h"
#include "vnic_wq.h"
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#ifdef GDTH_RTC
#include <linux/mc146818rtc.h>
*/
#include <linux/completion.h>
+#include <linux/slab.h>
int gdth_proc_info(struct Scsi_Host *host, char *buffer,char **start,off_t offset,int length,
int inout)
#include <linux/types.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/spinlock.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/div64.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/stringify.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <asm/firmware.h>
srp_cmd->buf_fmt = fmt;
}
-static void unmap_sg_list(int num_entries,
- struct device *dev,
- struct srp_direct_buf *md)
-{
- int i;
-
- for (i = 0; i < num_entries; ++i)
- dma_unmap_single(dev, md[i].va, md[i].len, DMA_BIDIRECTIONAL);
-}
-
/**
* unmap_cmd_data: - Unmap data pointed in srp_cmd based on the format
* @cmd: srp_cmd whose additional_data member will be unmapped
if (out_fmt == SRP_NO_DATA_DESC && in_fmt == SRP_NO_DATA_DESC)
return;
- else if (out_fmt == SRP_DATA_DESC_DIRECT ||
- in_fmt == SRP_DATA_DESC_DIRECT) {
- struct srp_direct_buf *data =
- (struct srp_direct_buf *) cmd->add_data;
- dma_unmap_single(dev, data->va, data->len, DMA_BIDIRECTIONAL);
- } else {
- struct srp_indirect_buf *indirect =
- (struct srp_indirect_buf *) cmd->add_data;
- int num_mapped = indirect->table_desc.len /
- sizeof(struct srp_direct_buf);
- if (num_mapped <= MAX_INDIRECT_BUFS) {
- unmap_sg_list(num_mapped, dev, &indirect->desc_list[0]);
- return;
- }
-
- unmap_sg_list(num_mapped, dev, evt_struct->ext_list);
- }
+ if (evt_struct->cmnd)
+ scsi_dma_unmap(evt_struct->cmnd);
}
static int map_sg_list(struct scsi_cmnd *cmd, int nseg,
*/
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_srp.h>
#include <asm/iommu.h>
#include <asm/hvcall.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <linux/interrupt.h>
#include "ibmvscsi.h"
#include <linux/parport.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/inet.h>
+#include <linux/slab.h>
#include <linux/file.h>
#include <linux/blkdev.h>
#include <linux/crypto.h>
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
write_unlock_bh(&tcp_sw_conn->sock->sk->sk_callback_lock);
- if (sock->sk->sk_sleep && waitqueue_active(sock->sk->sk_sleep)) {
+ if (sock->sk->sk_sleep) {
sock->sk->sk_err = EIO;
wake_up_interruptible(sock->sk->sk_sleep);
}
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/ioport.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pgtable.h>
*/
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <asm/unaligned.h>
*/
#include <linux/timer.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <scsi/fc/fc_fc2.h>
#include <linux/scatterlist.h>
#include <linux/err.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/crc32.h>
+#include <linux/gfp.h>
#include <scsi/fc_frame.h>
*/
#include <linux/timer.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <scsi/fc/fc_gs.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/rcupdate.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/kfifo.h>
#include <linux/delay.h>
#include <linux/log2.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
WARN_ON(hdrlength >= 256);
hdr->hlength = hdrlength & 0xFF;
+ hdr->cmdsn = task->cmdsn = cpu_to_be32(session->cmdsn);
if (session->tt->init_task && session->tt->init_task(task))
return -EIO;
task->state = ISCSI_TASK_RUNNING;
- hdr->cmdsn = task->cmdsn = cpu_to_be32(session->cmdsn);
session->cmdsn++;
conn->scsicmd_pdus_cnt++;
session->state = ISCSI_STATE_TERMINATE;
else if (conn->stop_stage != STOP_CONN_RECOVER)
session->state = ISCSI_STATE_IN_RECOVERY;
+
+ old_stop_stage = conn->stop_stage;
+ conn->stop_stage = flag;
spin_unlock_bh(&session->lock);
del_timer_sync(&conn->transport_timer);
iscsi_suspend_tx(conn);
spin_lock_bh(&session->lock);
- old_stop_stage = conn->stop_stage;
- conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
spin_unlock_bh(&session->lock);
#include <linux/types.h>
#include <linux/list.h>
#include <linux/inet.h>
+#include <linux/slab.h>
#include <linux/file.h>
#include <linux/blkdev.h>
#include <linux/crypto.h>
*/
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <scsi/sas_ata.h>
#include "sas_internal.h"
void sas_ata_task_abort(struct sas_task *task)
{
struct ata_queued_cmd *qc = task->uldd_task;
+ struct request_queue *q = qc->scsicmd->device->request_queue;
struct completion *waiting;
+ unsigned long flags;
/* Bounce SCSI-initiated commands to the SCSI EH */
if (qc->scsicmd) {
+ spin_lock_irqsave(q->queue_lock, flags);
blk_abort_request(qc->scsicmd->request);
+ spin_unlock_irqrestore(q->queue_lock, flags);
scsi_schedule_eh(qc->scsicmd->device->host);
return;
}
*/
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_eh.h>
#include "sas_internal.h"
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
+#include <linux/slab.h>
#include "sas_internal.h"
*/
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
+#include <linux/slab.h>
#include "sas_internal.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/blkdev.h>
#include <linux/freezer.h>
+#include <linux/gfp.h>
#include <linux/scatterlist.h>
#include <linux/libata.h>
void sas_task_abort(struct sas_task *task)
{
struct scsi_cmnd *sc = task->uldd_task;
+ struct request_queue *q = sc->device->request_queue;
+ unsigned long flags;
/* Escape for libsas internal commands */
if (!sc) {
return;
}
+ spin_lock_irqsave(q->queue_lock, flags);
blk_abort_request(sc->request);
+ spin_unlock_irqrestore(q->queue_lock, flags);
scsi_schedule_eh(sc->device->host);
}
* 02110-1301 USA
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/kfifo.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/aer.h>
+#include <linux/gfp.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <linux/interrupt.h>
#include <linux/mempool.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <scsi/scsi.h>
dd_data = cmdiocbq->context1;
/* normal completion and timeout crossed paths, already done */
if (!dd_data) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
return;
}
dd_data = cmdiocbq->context1;
/* normal completion and timeout crossed paths, already done */
if (!dd_data) {
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
return;
}
#include <linux/blkdev.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/utsname.h>
#include <scsi/scsi.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
/* See Fibre Channel protocol T11 FC-LS for details */
#include <linux/blkdev.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <scsi/scsi.h>
*******************************************************************/
#include <linux/blkdev.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
#include <linux/aer.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <linux/blkdev.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <scsi/scsi_device.h>
*******************************************************************/
#include <linux/mempool.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <scsi/scsi.h>
* included with this package. *
*******************************************************************/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/unaligned.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/nubus.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <scsi/scsicam.h>
#include "scsi.h"
* For history of changes, see Documentation/ChangeLog.megaraid
*/
+#include <linux/slab.h>
#include "megaraid_mbox.h"
static int megaraid_init(void);
* Common management module
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include "megaraid_mm.h"
#include <linux/delay.h>
#include <linux/smp_lock.h>
#include <linux/uio.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/fs.h>
#include <linux/compat.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "mpt2sas_base.h"
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/raid_class.h>
+#include <linux/slab.h>
#include "mpt2sas_base.h"
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <asm/mvme16xhw.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_device.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <scsi/libsas.h>
#include <scsi/scsi_tcq.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
+
#include <scsi/osd_initiator.h>
#include <scsi/osd_sec.h>
#include <scsi/osd_attributes.h>
#include <linux/idr.h>
#include <linux/major.h>
#include <linux/file.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_driver.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/errno.h>
*
*/
#include <linux/firmware.h>
+#include <linux/slab.h>
#include "pm8001_sas.h"
#include "pm8001_ctl.h"
* POSSIBILITY OF SUCH DAMAGES.
*
*/
+ #include <linux/slab.h>
#include "pm8001_sas.h"
#include "pm8001_hwi.h"
#include "pm8001_chips.h"
*
*/
+#include <linux/slab.h>
#include "pm8001_sas.h"
#include "pm8001_chips.h"
*
*/
+#include <linux/slab.h>
#include "pm8001_sas.h"
/**
#include <linux/hdreg.h>
#include <linux/version.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/processor.h>
#include <linux/libata.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/parport.h>
#include <linux/cdrom.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
* General Public License for more details.
*
******************************************************************************/
-#define QLA1280_VERSION "3.27"
+#define QLA1280_VERSION "3.27.1"
/*****************************************************************************
Revision History:
+ Rev 3.27.1, February 8, 2010, Michael Reed
+ - Retain firmware image for error recovery.
Rev 3.27, February 10, 2009, Michael Reed
- General code cleanup.
- Improve error recovery.
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
-#include <linux/slab.h>
#include <linux/pci_ids.h>
#include <linux/interrupt.h>
#include <linux/init.h>
/*****************************************/
struct qla_boards {
- unsigned char name[9]; /* Board ID String */
+ char *name; /* Board ID String */
int numPorts; /* Number of SCSI ports */
- char *fwname; /* firmware name */
+ int fw_index; /* index into qla1280_fw_tbl for firmware */
};
/* NOTE: the last argument in each entry is used to index ql1280_board_tbl */
};
MODULE_DEVICE_TABLE(pci, qla1280_pci_tbl);
+DEFINE_MUTEX(qla1280_firmware_mutex);
+
+struct qla_fw {
+ char *fwname;
+ const struct firmware *fw;
+};
+
+#define QL_NUM_FW_IMAGES 3
+
+struct qla_fw qla1280_fw_tbl[QL_NUM_FW_IMAGES] = {
+ {"qlogic/1040.bin", NULL}, /* image 0 */
+ {"qlogic/1280.bin", NULL}, /* image 1 */
+ {"qlogic/12160.bin", NULL}, /* image 2 */
+};
+
+/* NOTE: Order of boards in this table must match order in qla1280_pci_tbl */
static struct qla_boards ql1280_board_tbl[] = {
- /* Name , Number of ports, FW details */
- {"QLA12160", 2, "qlogic/12160.bin"},
- {"QLA1040", 1, "qlogic/1040.bin"},
- {"QLA1080", 1, "qlogic/1280.bin"},
- {"QLA1240", 2, "qlogic/1280.bin"},
- {"QLA1280", 2, "qlogic/1280.bin"},
- {"QLA10160", 1, "qlogic/12160.bin"},
- {" ", 0, " "},
+ {.name = "QLA12160", .numPorts = 2, .fw_index = 2},
+ {.name = "QLA1040" , .numPorts = 1, .fw_index = 0},
+ {.name = "QLA1080" , .numPorts = 1, .fw_index = 1},
+ {.name = "QLA1240" , .numPorts = 2, .fw_index = 1},
+ {.name = "QLA1280" , .numPorts = 2, .fw_index = 1},
+ {.name = "QLA10160", .numPorts = 1, .fw_index = 2},
+ {.name = " ", .numPorts = 0, .fw_index = -1},
};
static int qla1280_verbose = 1;
return status;
}
+/*
+ * qla1280_request_firmware
+ * Acquire firmware for chip. Retain in memory
+ * for error recovery.
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Returns:
+ * Pointer to firmware image or an error code
+ * cast to pointer via ERR_PTR().
+ */
+static const struct firmware *
+qla1280_request_firmware(struct scsi_qla_host *ha)
+{
+ const struct firmware *fw;
+ int err;
+ int index;
+ char *fwname;
+
+ spin_unlock_irq(ha->host->host_lock);
+ mutex_lock(&qla1280_firmware_mutex);
+
+ index = ql1280_board_tbl[ha->devnum].fw_index;
+ fw = qla1280_fw_tbl[index].fw;
+ if (fw)
+ goto out;
+
+ fwname = qla1280_fw_tbl[index].fwname;
+ err = request_firmware(&fw, fwname, &ha->pdev->dev);
+
+ if (err) {
+ printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
+ fwname, err);
+ fw = ERR_PTR(err);
+ goto unlock;
+ }
+ if ((fw->size % 2) || (fw->size < 6)) {
+ printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
+ fw->size, fwname);
+ release_firmware(fw);
+ fw = ERR_PTR(-EINVAL);
+ goto unlock;
+ }
+
+ qla1280_fw_tbl[index].fw = fw;
+
+ out:
+ ha->fwver1 = fw->data[0];
+ ha->fwver2 = fw->data[1];
+ ha->fwver3 = fw->data[2];
+ unlock:
+ mutex_unlock(&qla1280_firmware_mutex);
+ spin_lock_irq(ha->host->host_lock);
+ return fw;
+}
+
/*
* Chip diagnostics
* Test chip for proper operation.
static int
qla1280_load_firmware_pio(struct scsi_qla_host *ha)
{
+ /* enter with host_lock acquired */
+
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
uint16_t mb[MAILBOX_REGISTER_COUNT], i;
- int err;
+ int err = 0;
+
+ fw = qla1280_request_firmware(ha);
+ if (IS_ERR(fw))
+ return PTR_ERR(fw);
- spin_unlock_irq(ha->host->host_lock);
- err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
- &ha->pdev->dev);
- spin_lock_irq(ha->host->host_lock);
- if (err) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
- ql1280_board_tbl[ha->devnum].fwname, err);
- return err;
- }
- if ((fw->size % 2) || (fw->size < 6)) {
- printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
- fw->size, ql1280_board_tbl[ha->devnum].fwname);
- err = -EINVAL;
- goto out;
- }
- ha->fwver1 = fw->data[0];
- ha->fwver2 = fw->data[1];
- ha->fwver3 = fw->data[2];
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
if (err) {
printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
ha->host_no);
- goto out;
+ break;
}
}
-out:
- release_firmware(fw);
+
return err;
}
static int
qla1280_load_firmware_dma(struct scsi_qla_host *ha)
{
+ /* enter with host_lock acquired */
const struct firmware *fw;
const __le16 *fw_data;
uint16_t risc_address, risc_code_size;
return -ENOMEM;
#endif
- spin_unlock_irq(ha->host->host_lock);
- err = request_firmware(&fw, ql1280_board_tbl[ha->devnum].fwname,
- &ha->pdev->dev);
- spin_lock_irq(ha->host->host_lock);
- if (err) {
- printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
- ql1280_board_tbl[ha->devnum].fwname, err);
- return err;
- }
- if ((fw->size % 2) || (fw->size < 6)) {
- printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
- fw->size, ql1280_board_tbl[ha->devnum].fwname);
- err = -EINVAL;
- goto out;
- }
- ha->fwver1 = fw->data[0];
- ha->fwver2 = fw->data[1];
- ha->fwver3 = fw->data[2];
+ fw = qla1280_request_firmware(ha);
+ if (IS_ERR(fw))
+ return PTR_ERR(fw);
+
fw_data = (const __le16 *)&fw->data[0];
ha->fwstart = __le16_to_cpu(fw_data[2]);
#if DUMP_IT_BACK
pci_free_consistent(ha->pdev, 8000, tbuf, p_tbuf);
#endif
- release_firmware(fw);
return err;
}
static int
qla1280_load_firmware(struct scsi_qla_host *ha)
{
+ /* enter with host_lock taken */
int err;
err = qla1280_chip_diag(ha);
static void __exit
qla1280_exit(void)
{
+ int i;
+
pci_unregister_driver(&qla1280_pci_driver);
+ /* release any allocated firmware images */
+ for (i = 0; i < QL_NUM_FW_IMAGES; i++) {
+ if (qla1280_fw_tbl[i].fw) {
+ release_firmware(qla1280_fw_tbl[i].fw);
+ qla1280_fw_tbl[i].fw = NULL;
+ }
+ }
}
module_init(qla1280_init);
#include <linux/kthread.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/delay.h>
static int qla24xx_vport_disable(struct fc_vport *, bool);
int rval = QLA_FUNCTION_FAILED;
uint16_t state[5];
- if (!vha->hw->flags.eeh_busy)
+ if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+ test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+ DEBUG2_3_11(printk("%s(%ld): isp reset in progress.\n",
+ __func__, vha->host_no));
+ else if (!vha->hw->flags.eeh_busy)
rval = qla2x00_get_firmware_state(vha, state);
if (rval != QLA_SUCCESS)
memset(state, -1, sizeof(state));
return 0;
done:
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (bsg_job->request->msgcode == FC_BSG_HST_CT)
kfree(sp->fcport);
kfree(sp->ctx);
/* Offset 384. */
uint8_t reserved_21[16];
- uint16_t reserved_22[8];
+ uint16_t reserved_22[3];
+
+ /*
+ * BIT 0 = Extended BB credits for LR
+ * BIT 1 = Virtual Fabric Enable
+ * BIT 2 = Enhanced Features Unused
+ * BIT 3-7 = Enhanced Features Reserved
+ */
+ /* Enhanced Features */
+ uint8_t enhanced_features;
+
+ uint8_t reserved_23;
+ uint16_t reserved_24[4];
/* Offset 416. */
- uint16_t reserved_23[32];
+ uint16_t reserved_25[32];
/* Offset 480. */
uint8_t model_name[16];
/* Offset 496. */
uint16_t feature_mask_l;
uint16_t feature_mask_h;
- uint16_t reserved_24[2];
+ uint16_t reserved_26[2];
uint16_t subsystem_vendor_id;
uint16_t subsystem_device_id;
#include "qla_gbl.h"
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "qla_devtbl.h"
#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/slab.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_bsg_fc.h>
* vp_idx does not match
* Event is not global, vp_idx does not match
*/
- if ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff)
- || (mb[1] != 0xffff)) {
- if (vha->vp_idx != (mb[3] & 0xff))
- break;
- }
+ if (IS_QLA2XXX_MIDTYPE(ha) &&
+ ((mb[1] == 0xffff && (mb[3] & 0xff) != 0xff) ||
+ (mb[1] != 0xffff)) && vha->vp_idx != (mb[3] & 0xff))
+ break;
/* Global event -- port logout or port unavailable. */
if (mb[1] == 0xffff && mb[2] == 0x7) {
/* If possible, enable MSI-X. */
if (!IS_QLA2432(ha) && !IS_QLA2532(ha) &&
- !IS_QLA8432(ha) && !IS_QLA8001(ha))
- goto skip_msix;
+ !IS_QLA8432(ha) && !IS_QLA8001(ha))
+ goto skip_msi;
+
+ if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
+ (ha->pdev->subsystem_device == 0x7040 ||
+ ha->pdev->subsystem_device == 0x7041 ||
+ ha->pdev->subsystem_device == 0x1705)) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X,0x%X).\n",
+ ha->pdev->subsystem_vendor,
+ ha->pdev->subsystem_device));
+ goto skip_msi;
+ }
if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
DEBUG2(qla_printk(KERN_WARNING, ha,
"MSI-X: Unsupported ISP2432 (0x%X, 0x%X).\n",
ha->pdev->revision, ha->fw_attributes));
-
goto skip_msix;
}
- if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_HP &&
- (ha->pdev->subsystem_device == 0x7040 ||
- ha->pdev->subsystem_device == 0x7041 ||
- ha->pdev->subsystem_device == 0x1705)) {
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "MSI-X: Unsupported ISP2432 SSVID/SSDID (0x%X, 0x%X).\n",
- ha->pdev->subsystem_vendor,
- ha->pdev->subsystem_device));
-
- goto skip_msi;
- }
-
ret = qla24xx_enable_msix(ha, rsp);
if (!ret) {
DEBUG2(qla_printk(KERN_INFO, ha,
#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/gfp.h>
/*
return rval;
}
+#define EXTENDED_BB_CREDITS BIT_0
/*
* qla2x00_execute_fw
* Start adapter firmware.
mcp->mb[1] = MSW(risc_addr);
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
- mcp->mb[4] = 0;
+ if (IS_QLA81XX(ha)) {
+ struct nvram_81xx *nv = ha->nvram;
+ mcp->mb[4] = (nv->enhanced_features &
+ EXTENDED_BB_CREDITS);
+ } else
+ mcp->mb[4] = 0;
mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
mcp->in_mb |= MBX_1;
} else {
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <scsi/scsi_tcq.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/kobject.h>
+#include <linux/slab.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
/* Determine queue resources */
ha->max_req_queues = ha->max_rsp_queues = 1;
- if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+ if ((ql2xmaxqueues <= 1 && !ql2xmultique_tag) ||
+ (ql2xmaxqueues > 1 && ql2xmultique_tag) ||
(!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
goto mqiobase_exit;
+
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
pci_resource_len(ha->pdev, 3));
if (ha->mqiobase) {
#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/uaccess.h>
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.02-k1"
+#define QLA2XXX_VERSION "8.03.02-k2"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
#define QLA_DRIVER_PATCH_VER 2
-#define QLA_DRIVER_BETA_VER 1
+#define QLA_DRIVER_BETA_VER 2
if (conn_err_detail)
*conn_err_detail = mbox_sts[5];
if (tcp_source_port_num)
- *tcp_source_port_num = (uint16_t) mbox_sts[6] >> 16;
+ *tcp_source_port_num = (uint16_t) (mbox_sts[6] >> 16);
if (connection_id)
*connection_id = (uint16_t) mbox_sts[6] & 0x00FF;
status = QLA_SUCCESS;
* See LICENSE.qla4xxx for copyright and licensing details.
*/
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/string.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/blkdev.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/genhd.h>
static sector_t get_sdebug_capacity(void)
{
if (scsi_debug_virtual_gb > 0)
- return 2048 * 1024 * (sector_t)scsi_debug_virtual_gb;
+ return (sector_t)scsi_debug_virtual_gb *
+ (1073741824 / scsi_debug_sector_size);
else
return sdebug_store_sectors;
}
#include <linux/moduleparam.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_devinfo.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/gfp.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/kernel.h>
if (scmd->device->allow_restart &&
(sshdr.asc == 0x04) && (sshdr.ascq == 0x02))
return FAILED;
- return SUCCESS;
+
+ if (blk_barrier_rq(scmd->request))
+ /*
+ * barrier requests should always retry on UA
+ * otherwise block will get a spurious error
+ */
+ return NEEDS_RETRY;
+ else
+ /*
+ * for normal (non barrier) commands, pass the
+ * UA upwards for a determination in the
+ * completion functions
+ */
+ return SUCCESS;
/* these three are not supported */
case COPY_ABORTED:
#include <linux/jiffies.h>
#include <linux/security.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/netlink.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/errno.h>
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include <linux/mutex.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <scsi/scsi.h>
#include <linux/kthread.h>
#include <linux/spinlock.h>
#include <linux/async.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/device.h>
* 02110-1301 USA
*/
#include <linux/miscdevice.h>
+#include <linux/gfp.h>
#include <linux/file.h>
#include <linux/smp_lock.h>
#include <net/tcp.h>
#include <linux/hash.h>
#include <linux/module.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
if (rport && (rport->port_state != FC_PORTSTATE_ONLINE)) {
req->errors = -ENXIO;
spin_unlock_irq(q->queue_lock);
- blk_end_request(req, -ENXIO, blk_rq_bytes(req));
+ blk_end_request_all(req, -ENXIO);
spin_lock_irq(q->queue_lock);
continue;
}
ret = fc_req_to_bsgjob(shost, rport, req);
if (ret) {
req->errors = ret;
- blk_end_request(req, ret, blk_rq_bytes(req));
+ blk_end_request_all(req, ret);
spin_lock_irq(q->queue_lock);
continue;
}
*/
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/tcp.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include "scsi_priv.h"
#include <scsi/scsi_device.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/genhd.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/string_helpers.h>
#include <linux/async.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
{
rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->timeout = SD_TIMEOUT;
+ rq->retries = SD_MAX_RETRIES;
rq->cmd[0] = SYNCHRONIZE_CACHE;
rq->cmd_len = 10;
}
blk_queue_prep_rq(sdp->request_queue, sd_prep_fn);
gd->driverfs_dev = &sdp->sdev_gendev;
- gd->flags = GENHD_FL_EXT_DEVT | GENHD_FL_DRIVERFS;
+ gd->flags = GENHD_FL_EXT_DEVT;
if (sdp->removable)
gd->flags |= GENHD_FL_REMOVABLE;
**-----------------------------------------------------------------------------
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/enclosure.h>
#include <linux/errno.h>
#include <linux/mtio.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/poll.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <scsi/scsi.h>
#include <linux/blkpg.h>
#include <linux/cdrom.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/string.h>
#include <linux/bcd.h>
#include <linux/blkdev.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/mtio.h>
#include <linux/cdrom.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
* interrupt or bottom half.
*/
+#include <linux/gfp.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/gfp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <scsi/scsi.h>
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/ioport.h>
#include <linux/proc_fs.h>
{
Adapter *host = (Adapter *) SCpnt->device->host->hostdata;
- spin_unlock_irq(SCpnt->device->host->host_lock);
+ spin_lock_irq(SCpnt->device->host->host_lock);
if (wd7000_adapter_reset(host) < 0) {
spin_unlock_irq(SCpnt->device->host->host_lock);
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/zorro.h>
+#include <linux/slab.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <linux/pm.h>
#include <linux/bitops.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/serial_8250.h>
#include <linux/nmi.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/module.h>
#include <linux/serial_core.h>
#include <linux/signal.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <asm/hardware.h>
#include <linux/delay.h>
#include <linux/dio.h>
#include <linux/console.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include "8250.h"
{ "FUJ02E6", 0 },
/* Fujitsu Wacom 2FGT Tablet PC device */
{ "FUJ02E7", 0 },
+ /* Fujitsu Wacom 1FGT Tablet PC device */
+ { "FUJ02E9", 0 },
/*
* LG C1 EXPRESS DUAL (C1-PB11A3) touch screen (actually a FUJ02E6 in
* disguise)
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/amba/bus.h>
#include <linux/amba/serial.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/gfp.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/tty.h>
+#include <linux/gfp.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/console.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/rational.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/pci.h>
#include <linux/serial_core.h>
#include <linux/ioc3.h>
+#include <linux/slab.h>
/*
* Interesting things about the ioc3
#include <linux/pci.h>
#include <linux/ioc4.h>
#include <linux/serial_core.h>
+#include <linux/slab.h>
/*
* interesting things about the ioc4
***********************************************************************/
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "jsm.h"
#include <linux/serial_reg.h>
#include <linux/delay.h> /* For udelay */
#include <linux/pci.h>
+#include <linux/slab.h>
#include "jsm.h"
#define MAX_MAX3100 4
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
}
spin_lock_irqsave(&port->lock, flags);
+ uart_update_timeout(port, termios->c_cflag, baud);
writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR);
writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR);
static void mcf_config_port(struct uart_port *port, int flags)
{
port->type = PORT_MCF;
+ port->fifosize = MCFUART_TXFIFOSIZE;
/* Clear mask, so no surprise interrupts. */
writeb(0, port->membase + MCFUART_UIMR);
/*
* Define the basic serial functions we support.
*/
-static struct uart_ops mcf_uart_ops = {
+static const struct uart_ops mcf_uart_ops = {
.tx_empty = mcf_tx_empty,
.get_mctrl = mcf_get_mctrl,
.set_mctrl = mcf_set_mctrl,
.verify_port = mcf_verify_port,
};
-static struct mcf_uart mcf_ports[3];
+static struct mcf_uart mcf_ports[4];
#define MCF_MAXPORTS ARRAY_SIZE(mcf_ports)
* kind, whether express or implied.
*/
-/* Platform device Usage :
- *
- * Since PSCs can have multiple function, the correct driver for each one
- * is selected by calling mpc52xx_match_psc_function(...). The function
- * handled by this driver is "uart".
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- *
- * The idx field must be equal to the PSC index (e.g. 0 for PSC1, 1 for PSC2,
- * and so on). So the PSC1 is mapped to /dev/ttyPSC0, PSC2 to /dev/ttyPSC1 and
- * so on. But be warned, it's an ABSOLUTE REQUIREMENT ! This is needed mainly
- * fpr the console code : without this 1:1 mapping, at early boot time, when we
- * are parsing the kernel args console=ttyPSC?, we wouldn't know which PSC it
- * will be mapped to.
- */
-
-/* OF Platform device Usage :
- *
- * This driver is only used for PSCs configured in uart mode. The device
- * tree will have a node for each PSC with "mpc52xx-psc-uart" in the compatible
- * list.
- *
- * By default, PSC devices are enumerated in the order they are found. However
- * a particular PSC number can be forces by adding 'device_no = <port#>'
- * to the device node.
- *
- * The driver init all necessary registers to place the PSC in uart mode without
- * DCD. However, the pin multiplexing aren't changed and should be set either
- * by the bootloader or in the platform init code.
- */
-
#undef DEBUG
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/mv643xx.h>
#include <linux/platform_device.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/console.h>
-#include <linux/slab.h>
#include <linux/delay.h> /* for udelay */
#include <linux/device.h>
#include <asm/io.h>
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/console.h>
-#include <linux/slab.h>
#include <linux/adb.h>
#include <linux/pmu.h>
#include <linux/bitops.h>
uap->curregs[R5] = new_reg;
/* NOTE: Not subject to 'transmitter active' rule. */
- if (ZS_IS_ASLEEP(uap))
+ if (ZS_IS_ASLEEP(uap)) {
+ spin_unlock_irqrestore(&port->lock, flags);
return;
+ }
write_zsreg(uap, R5, uap->curregs[R5]);
}
#include <linux/serial_core.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
struct uart_pxa_port {
struct uart_port port;
* manfid 0x0160, 0x0104
* This card appears to have a 14.7456MHz clock.
*/
+/* Generic Modem: MD55x (GPRS/EDGE) have
+ * Elan VPU16551 UART with 14.7456MHz oscillator
+ * manfid 0x015D, 0x4C45
+ */
static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
{
port->uartclk = 14745600;
.prodid = 0x0104,
.multi = -1,
.setup = quirk_setup_brainboxes_0104,
+ }, {
+ .manfid = 0x015D,
+ .prodid = 0x4C45,
+ .multi = -1,
+ .setup = quirk_setup_brainboxes_0104,
}, {
.manfid = MANFID_IBM,
.prodid = ~0,
PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
+ PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
static int __init ks8695_console_init(void)
{
+ add_preferred_console(SERIAL_KS8695_DEVNAME, 0, NULL);
register_console(&ks8695_console);
return 0;
}
#include <linux/list.h>
#include <linux/dmaengine.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#ifdef CONFIG_SUPERH
#include <asm/sh_bios.h>
if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
ret = sci_br_interrupt(irq, ptr);
- WARN_ONCE(ret == IRQ_NONE,
- "%s: %d IRQ %d, status %x, control %x\n", __func__,
- irq, port->line, ssr_status, scr_status);
-
return ret;
}
# define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
#elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SHMOBILE)
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
# define PORT_PTCR 0xA405011EUL
# define PORT_PVCR 0xA4050122UL
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
# define SCIF_ORER 0x0001 /* overrun error bit */
-# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCSCR_INIT(port) ((port)->type == PORT_SCIFA ? \
+ 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */ : \
+ 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ )
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
defined(CONFIG_CPU_SUBTYPE_SH7786) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
+#define SCI_CTRL_FLAGS_REIE ((port)->type == PORT_SCIFA ? 0 : 8)
#else
#define SCI_CTRL_FLAGS_REIE 0
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SHMOBILE)
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
# define SCIF_ORER 0x0200
# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
# define SCIF_RFDC_MASK 0x007f
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SHMOBILE)
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port, SCxSR) & 0xffdf)
SCI_OUT(sci_size, sci_offset, value); \
}
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_ARCH_SHMOBILE)
+#if defined(CONFIG_CPU_SH3) || \
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SHMOBILE)
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SHMOBILE)
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SHMOBILE)
+ defined(CONFIG_ARCH_SH7367) || \
+ defined(CONFIG_ARCH_SH7377) || \
+ defined(CONFIG_ARCH_SH7372)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723) ||\
defined(CONFIG_CPU_SUBTYPE_SH7724)
#include <linux/serial.h>
#include <linux/sysrq.h>
#include <linux/console.h>
+#include <linux/slab.h>
#ifdef CONFIG_SERIO
#include <linux/serio.h>
#endif
if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
err = sunsu_kbd_ms_init(up);
if (err) {
+ of_iounmap(&op->resource[0],
+ up->port.membase, up->reg_size);
kfree(up);
- goto out_unmap;
+ return err;
}
dev_set_drvdata(&op->dev, up);
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include "timbuart.h"
#include <linux/module.h>
#include <linux/serial.h>
+#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/of_platform.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/sh_intc.h>
#include <linux/sysdev.h>
#include <linux/delay.h>
#include <linux/ioc3.h>
#include <linux/rwsem.h>
+#include <linux/slab.h>
#define IOC3_PCI_SIZE 0x100000
#include <linux/amba/bus.h>
#include <linux/amba/pl022.h>
#include <linux/io.h>
+#include <linux/slab.h>
/*
* This macro is used to define some register default values.
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <mach/board.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
+#include <linux/slab.h>
#include <mach/spi.h>
#include <mach/edma.h>
#include <linux/interrupt.h>
#include <linux/highmem.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/spi/dw_spi.h>
#include <linux/spi/spi.h>
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/spi/dw_spi.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/spi/dw_spi.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/fsl_devices.h>
+#include <linux/slab.h>
#include <asm/mpc52xx.h>
#include <asm/mpc52xx_psc.h>
#include <linux/of_spi.h>
#include <linux/io.h>
#include <linux/of_gpio.h>
+#include <linux/slab.h>
#include <asm/time.h>
#include <asm/mpc52xx.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
cs->chconf0 = val;
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
}
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
goto out;
}
#ifdef VERBOSE
- dev_dbg(&spi->dev, "write-%d %04x\n",
+ dev_dbg(&spi->dev, "write-%d %08x\n",
word_len, *tx);
#endif
__raw_writel(*tx++, tx_reg);
mcspi_write_chconf0(spi, l);
*rx++ = __raw_readl(rx_reg);
#ifdef VERBOSE
- dev_dbg(&spi->dev, "read-%d %04x\n",
+ dev_dbg(&spi->dev, "read-%d %08x\n",
word_len, *(rx - 1));
#endif
}
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/init.h>
#include <linux/cache.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/mod_devicetable.h>
#include <linux/spi/spi.h>
spi->master->cleanup(spi);
spi_master_put(spi->master);
- kfree(dev);
+ kfree(spi);
}
static ssize_t
{
static DEFINE_MUTEX(spi_add_lock);
struct device *dev = spi->master->dev.parent;
+ struct device *d;
int status;
/* Chipselects are numbered 0..max; validate. */
*/
mutex_lock(&spi_add_lock);
- if (bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev))
- != NULL) {
+ d = bus_find_device_by_name(&spi_bus_type, NULL, dev_name(&spi->dev));
+ if (d != NULL) {
dev_err(dev, "chipselect %d already in use\n",
spi->chip_select);
+ put_device(d);
status = -EBUSY;
goto done;
}
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <linux/of_spi.h>
+#include <linux/slab.h>
#include <sysdev/fsl_soc.h>
#include <asm/cpm.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/device.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/tle62x0.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/ssb/ssb_driver_gige.h>
#include <linux/pci.h>
#include <linux/pci_regs.h>
+#include <linux/slab.h>
/*
.pci_ops = &ssb_pcicore_pciops,
.io_resource = &ssb_pcicore_io_resource,
.mem_resource = &ssb_pcicore_mem_resource,
- .mem_offset = 0x24000000,
};
-static u32 ssb_pcicore_pcibus_iobase = 0x100;
-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-
/* This function is called when doing a pci_enable_device().
* We must first check if the device is a device on the PCI-core bridge. */
int ssb_pcicore_plat_dev_init(struct pci_dev *d)
{
- struct resource *res;
- int pos, size;
- u32 *base;
-
if (d->bus->ops != &ssb_pcicore_pciops) {
/* This is not a device on the PCI-core bridge. */
return -ENODEV;
ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
pci_name(d));
- /* Fix up resource bases */
- for (pos = 0; pos < 6; pos++) {
- res = &d->resource[pos];
- if (res->flags & IORESOURCE_IO)
- base = &ssb_pcicore_pcibus_iobase;
- else
- base = &ssb_pcicore_pcibus_membase;
- res->flags |= IORESOURCE_PCI_FIXED;
- if (res->end) {
- size = res->end - res->start + 1;
- if (*base & (size - 1))
- *base = (*base + size) & ~(size - 1);
- res->start = *base;
- res->end = res->start + size - 1;
- *base += size;
- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
- }
- /* Fix up PCI bridge BAR0 only */
- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
- break;
- }
/* Fix up interrupt lines */
d->irq = ssb_mips_irq(extpci_core->dev) + 2;
pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
#include <linux/dma-mapping.h>
#include <linux/pci.h>
#include <linux/mmc/sdio_func.h>
+#include <linux/slab.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/ssb/ssb.h>
#include "ssb_private.h"
#include <linux/ctype.h>
+#include <linux/slab.h>
static const struct ssb_sprom *fallback_sprom;
*/
#include <linux/device.h>
+#include <linux/slab.h>
#include "main.h"
#include "device.h"
#include "send.h"
#include <linux/kthread.h> /* kernel threads */
#include <linux/pkt_sched.h> /* schedule types */
#include <linux/workqueue.h> /* workqueue */
+#include <linux/slab.h>
#include <net/sock.h> /* struct sock */
#include <linux/jiffies.h>
#include "types.h"
#include "translation-table.h"
#include "types.h"
#include "hash.h"
+#include <linux/slab.h>
#include <linux/ethtool.h>
#include <linux/etherdevice.h>
#include "../comedidev.h"
#include <linux/ioport.h>
+#include <linux/slab.h>
#define _8255_SIZE 4
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/timex.h>
#include <linux/timer.h>
#include <linux/pci.h>
+#include <linux/gfp.h>
#include "../../comedidev.h"
#include <asm/io.h>
#if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300)
#include "../pci_ids.h"
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/interrupt.h>
#include "amcc_s5933.h"
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include <linux/pci.h>
#include "../comedilib.h"
#include "../comedidev.h"
#include <linux/string.h>
+#include <linux/slab.h>
/* The maxiumum number of channels per subdevice. */
#define MAX_CHANS 256
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "das08.h"
*/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <asm/dma.h>
#include "../comedidev.h"
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/ioport.h>
#include "../comedidev.h"
+#include <linux/gfp.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <asm/dma.h>
#include <linux/ctype.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include "comedi_pci.h"
#include "jr3_pci.h"
#define DEBUG 1
#define DEBUG_FLAGS
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include "mite.h"
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include "mite.h"
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/ioport.h>
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/ioport.h>
#undef LABPC_DEBUG
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/ioport.h>
/* #define LABPC_DEBUG enable debugging messages */
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include "../comedidev.h"
#include <linux/delay.h>
+#include <linux/slab.h>
#include "8253.h"
#include "8255.h"
*/
#include <linux/interrupt.h>
+#include <linux/gfp.h>
#include "../comedidev.h"
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/mc146818rtc.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include <linux/ioport.h>
#include <linux/mc146818rtc.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <asm/dma.h>
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include "pcm_common.h"
#include <linux/pci.h> /* for PCI devices */
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "../comedidev.h"
#include "pcm_common.h"
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/termios.h>
#include <asm/ioctls.h>
#include "../comedidev.h"
#include <linux/ioport.h>
+#include <linux/slab.h>
#define DRIVER_NAME "unioxx5"
#define UNIOXX5_SIZE 0x10
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <asm/io.h>
#include "../comedi.h"
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/mm.h>
-#include <linux/slab.h>
/* functions specific to kcomedilib */
**********************************************************************/
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "crystalhd_hw.h"
***************************************************************************/
#include <linux/version.h>
+#include <linux/slab.h>
#include "crystalhd_lnx.h"
* along with this driver. If not, see <http://www.gnu.org/licenses/>.
**********************************************************************/
+#include <linux/slab.h>
+
#include "crystalhd_misc.h"
#include "crystalhd_lnx.h"
#include <linux/vmalloc.h>
#include <linux/dma-mapping.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <asm/delay.h>
#include <sound/core.h>
#include <linux/file.h>
#include <linux/fcntl.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
+
#include "cx25821-video.h"
static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
*/
#include <linux/i2c.h>
+#include <linux/slab.h>
#include "cx25821.h"
#include "cx25821-sram.h"
#include "cx25821-video.h"
#include <linux/syscalls.h>
#include <linux/file.h>
#include <linux/fcntl.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
#include <linux/syscalls.h>
#include <linux/file.h>
#include <linux/fcntl.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <mach/board.h>
#include <linux/spinlock.h>
#include <linux/videodev2.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <media/v4l2-dev.h>
#include <media/msm_camera.h>
#include <mach/camera.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/android_pmem.h>
+#include <linux/slab.h>
#include <mach/msm_adsp.h>
#include <linux/delay.h>
#include <linux/wait.h>
/*
* Copyright (C) 2008-2009 QUALCOMM Incorporated.
*/
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <mach/irqs.h>
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/uaccess.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/uaccess.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/gpio_event.h>
#include <linux/interrupt.h>
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/gpio_event.h>
#include <linux/hrtimer.h>
#include <linux/input.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
enum {
DEBOUNCE_UNSTABLE = BIT(0), /* Got irq, while debouncing */
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/gpio_event.h>
#include <linux/hrtimer.h>
#include <linux/android_pmem.h>
#include <linux/mempolicy.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
#include <linux/kernel.h>
#include <linux/kthread.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/wait.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include "adsp.h"
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <asm/atomic.h>
#include <asm/ioctls.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <linux/delay.h>
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/wakelock.h>
+#include <linux/gfp.h>
#include <linux/msm_audio.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <asm/ioctls.h>
#include <mach/msm_adsp.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
#include <linux/platform_device.h>
#include <linux/msm_rpcrouter.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/wakelock.h>
+#include <linux/slab.h>
#include <linux/msm_rpcrouter.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#ifdef CONFIG_HAS_EARLYSUSPEND
#include <linux/earlysuspend.h>
#endif
#include <linux/types.h>
#include <linux/mm.h> /* PAGE_ALIGN() */
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/page.h>
extern void printques(int);
-#ifdef MODULE
#include <linux/module.h>
#include <linux/interrupt.h>
-
-
-MODULE_LICENSE("GPL");
-
-#endif
-
-#ifndef CONFIG_PCI
-#error "DT3155 : Kernel PCI support not enabled (DT3155 drive requires PCI)"
-#endif
-
#include <linux/pci.h>
#include <linux/types.h>
#include <linux/poll.h>
#include "dt3155_io.h"
#include "allocator.h"
+
+MODULE_LICENSE("GPL");
+
/* Error variable. Zero means no error. */
int dt3155_errno = 0;
/* 50/60 Hz should be set before this point but let's make sure it is */
/* right anyway */
- ReadI2C(dt3155_lbase[ minor ], CONFIG, &i2c_csr2.reg);
+ ReadI2C(dt3155_lbase[ minor ], CSR2, &i2c_csr2.reg);
i2c_csr2.fld.HZ50 = FORMAT50HZ;
- WriteI2C(dt3155_lbase[ minor ], CONFIG, i2c_config.reg);
+ WriteI2C(dt3155_lbase[ minor ], CSR2, i2c_csr2.reg);
/* enable busmaster chip, clear flags */
*/
#include <asm/system.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
}
/* Enable TXMAC */
- ctl |= 0x05; /* TX mac enable, FC disable */
+ ctl |= 0x09; /* TX mac enable, FC disable */
writel(ctl, &etdev->regs->txmac.ctl);
/* Ready to start the RXDMA/TXDMA engine */
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <linux/videodev2.h>
#include <media/tuner.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include "go7007-priv.h"
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/unistd.h>
#include <linux/time.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
#include <media/v4l2-i2c-drv.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/usb.h>
#include <dvb-usb.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include "wis-i2c.h"
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include "wis-i2c.h"
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <linux/slab.h>
#include <media/tuner.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include "wis-i2c.h"
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include "wis-i2c.h"
*/
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include "osd.h"
#include "logging.h"
#include "VmbusPrivate.h"
*/
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include "osd.h"
#include "logging.h"
*/
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "osd.h"
#include "logging.h"
*/
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "osd.h"
#include "logging.h"
DPRINT_ENTER(VMBUS);
if (gHvContext.SignalEventBuffer) {
+ kfree(gHvContext.SignalEventBuffer);
gHvContext.SignalEventBuffer = NULL;
gHvContext.SignalEventParam = NULL;
- kfree(gHvContext.SignalEventBuffer);
}
if (gHvContext.HypercallPage) {
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include "osd.h"
#include "logging.h"
#include "NetVsc.h"
*/
#include <linux/kernel.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include "osd.h"
#include "logging.h"
ret = RndisFilterSetPacketFilter(Device,
NDIS_PACKET_TYPE_BROADCAST |
+ NDIS_PACKET_TYPE_ALL_MULTICAST |
NDIS_PACKET_TYPE_DIRECTED);
if (ret == 0)
Device->State = RNDIS_DEV_DATAINITIALIZED;
*/
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include "osd.h"
*/
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include "osd.h"
#include "logging.h"
#include "VersionInfo.h"
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_eh.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/route.h>
#include <net/sock.h>
if (!net_drv_obj->Base.OnDeviceAdd)
return -1;
- net = alloc_netdev(sizeof(struct net_device_context), "seth%d",
- ether_setup);
+ net = alloc_etherdev(sizeof(struct net_device_context));
if (!net)
return -1;
#include <linux/time.h>
#include <linux/io.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include "osd.h"
struct osd_callback_struct {
* Hank Janssen <hjanssen@microsoft.com>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/blkdev.h>
#include <linux/sysctl.h>
#include <linux/pci.h>
#include <linux/dmi.h>
+#include <linux/slab.h>
#include "VersionInfo.h"
#include "osd.h"
#include "logging.h"
#include <linux/sysfs.h>
#include <linux/rtc.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "../iio.h"
#include "../sysfs.h"
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
{
struct iio_work_cont *wc
- = container_of(work_s, struct iio_work_cont, ws_nocheck);
+ = container_of(work_s, struct iio_work_cont, ws);
struct lis3l02dq_state *st = wc->st;
u8 t;
#include <linux/spi/spi.h>
#include <linux/sysfs.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include "../iio.h"
#include "../sysfs.h"
struct lis3l02dq_state *state = indio_dev->dev_data;
state->trig = iio_allocate_trigger();
+ if (!state->trig)
+ return -ENOMEM;
+
state->trig->name = kmalloc(IIO_TRIGGER_NAME_LENGTH, GFP_KERNEL);
if (!state->trig->name) {
ret = -ENOMEM;
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/sysfs.h>
#include <linux/gpio.h>
#include <linux/fs.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/sysfs.h>
#include <linux/i2c.h>
#include <linux/rtc.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include "../iio.h"
#include "../sysfs.h"
if (!IS_ERR(st->reg))
regulator_put(st->reg);
error_free_st:
+ i2c_set_clientdata(client, NULL);
kfree(st);
error_ret:
regulator_disable(st->reg);
regulator_put(st->reg);
}
+ i2c_set_clientdata(client, NULL);
kfree(st);
return 0;
#include <linux/gpio.h>
#include <linux/workqueue.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/cdev.h>
+#include <linux/slab.h>
#include "iio.h"
#include "trigger_consumer.h"
sysfs_remove_group(&dev_info->dev.kobj, dev_info->attrs);
}
+/* Return a negative errno on failure */
int iio_get_new_idr_val(struct idr *this_idr)
{
int ret;
for (i = 0; i < dev_info->num_interrupt_lines; i++) {
dev_info->event_interfaces[i].owner = dev_info->driver_module;
ret = iio_get_new_idr_val(&iio_event_idr);
- if (ret)
+ if (ret < 0)
goto error_free_setup_ev_ints;
else
dev_info->event_interfaces[i].id = ret;
#include <linux/module.h>
#include <linux/cdev.h>
#include <linux/idr.h>
+#include <linux/slab.h>
#include "iio.h"
#include "ring_generic.h"
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include "iio.h"
#include "trigger.h"
#include <linux/pm.h>
#include <linux/hwmon.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "../iio.h"
#include "tsl2563.h"
fail2:
iio_device_unregister(chip->indio_dev);
fail1:
+ i2c_set_clientdata(client, NULL);
kfree(chip);
return err;
}
iio_device_unregister(chip->indio_dev);
+ i2c_set_clientdata(client, NULL);
kfree(chip);
return 0;
}
* the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
return -EAGAIN;
memcpy(data, last_written_p_copy, ring->buf.bpd);
- if (unlikely(ring->last_written_p >= last_written_p_copy))
+ if (unlikely(ring->last_written_p != last_written_p_copy))
goto again;
iio_unmark_sw_rb_in_use(&ring->buf);
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include "../iio.h"
#include "../trigger.h"
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/rtc.h>
#include "../iio.h"
#include "../trigger.h"
#include "driver.h"
+#include <linux/slab.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "audio.h"
*/
#include "driver.h"
+
+#include <linux/slab.h>
+
#include "dumprequest.h"
#include "driver.h"
#include <linux/usb.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/rawmidi.h>
#include "driver.h"
+#include <linux/slab.h>
+
#include <sound/core.h>
#include <sound/control.h>
#include <sound/pcm.h>
#include "driver.h"
+#include <linux/slab.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include "driver.h"
+#include <linux/slab.h>
+
#include "audio.h"
#include "capture.h"
#include "control.h"
#include "driver.h"
+#include <linux/slab.h>
+
#include "audio.h"
#include "control.h"
#include "variax.h"
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/errno.h>
* through switch.
*/
return -1;
+
+ case CVMX_BOARD_TYPE_CUST_WSX16:
+ if (ipd_port >= 0 && ipd_port <= 3)
+ return ipd_port;
+ else if (ipd_port >= 16 && ipd_port <= 19)
+ return ipd_port - 16 + 4;
+ else
+ return -1;
}
/* Some unknown board. Somebody forgot to update this function... */
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <asm/octeon/octeon.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/phy.h>
+#include <linux/slab.h>
#include <net/dst.h>
/* Platform dependent. */
/* */
/************************************************************************/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/uaccess.h>
#include "linux/netlink.h"
#include "linux/rtnetlink.h"
+#include "linux/slab.h"
#include <net/iw_handler.h>
#include <linux/uaccess.h>
#include <linux/wireless.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include "zdcompat.h"
#include "usbdrv.h"
#include <linux/netlink.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
/* Memory management */
#include "usbdrv.h"
#include <linux/netlink.h>
+#include <linux/gfp.h>
#include <net/iw_handler.h>
#include "usbdrv.h"
#include <linux/netlink.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
extern void zfLnxInitUsbTxQ(zdev_t *dev);
#include "usbdrv.h"
#include <linux/netlink.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
extern void zfiRecv80211(zdev_t* dev, zbuf_t* buf, struct zsAdditionInfo* addInfo);
#endif
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "usbdrv.h"
#include <linux/ioctl.h>
#include <linux/io.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "poch.h"
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include "netfs.h"
#include <linux/fs.h>
#include <linux/jhash.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include "netfs.h"
#include <linux/backing-dev.h>
#include <linux/fs.h>
#include <linux/fsnotify.h>
-#include <linux/slab.h>
#include <linux/mempool.h>
#include "netfs.h"
#include <linux/kthread.h>
#include <linux/pagemap.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/syscalls.h>
#include <linux/vmalloc.h>
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/ktime.h>
#include <linux/fs_struct.h>
#include <linux/device.h>
#include <linux/genhd.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <linux/lzo.h>
#include <linux/string.h>
#include <linux/swap.h>
#include "rt_config.h"
#include <linux/pci.h>
+#include <linux/slab.h>
/* Following information will be show when you run 'modinfo' */
/* *** If you have a solution for the bug in current version of driver, please mail to me. */
#include <linux/firmware.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "rt_config.h"
unsigned long RTDebugLevel = RT_DEBUG_ERROR;
{USB_DEVICE(0x07D1, 0x3C11)}, /* D-Link */
{USB_DEVICE(0x14B2, 0x3C07)}, /* AL */
{USB_DEVICE(0x050D, 0x8053)}, /* Belkin */
+ {USB_DEVICE(0x050D, 0x825B)}, /* Belkin */
{USB_DEVICE(0x14B2, 0x3C23)}, /* Airlink */
{USB_DEVICE(0x14B2, 0x3C27)}, /* Airlink */
{USB_DEVICE(0x07AA, 0x002F)}, /* Corega */
#include <linux/random.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include <asm/uaccess.h>
******************************************************************************/
#include <linux/wireless.h>
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include "ieee80211.h"
#undef RX_DONT_PASS_UL
#undef DUMMY_RX
+#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/eeprom_93cx6.h>
#include <linux/random.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include <asm/uaccess.h>
#ifdef ENABLE_DOT11D
#include <linux/wireless.h>
#include <linux/version.h>
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include "ieee80211.h"
#include "ieee80211.h"
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include "rtl819x_TS.h"
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
//#define CONFIG_RTL8192_IO_MAP
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "r8192E_hw.h"
#include "r8192E.h"
#include <linux/random.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include <asm/uaccess.h>
#include "dot11d.h"
******************************************************************************/
#include <linux/wireless.h>
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include "ieee80211.h"
#include "ieee80211.h"
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include "rtl819x_TS.h"
void TsSetupTimeOut(unsigned long data)
*/
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#undef LOOP_TEST
#undef DUMP_RX
static const struct usb_device_id rtl8192_usb_id_tbl[] = {
/* Realtek */
+ {USB_DEVICE(0x0bda, 0x8171)},
{USB_DEVICE(0x0bda, 0x8192)},
{USB_DEVICE(0x0bda, 0x8709)},
/* Corega */
{USB_DEVICE(0x07aa, 0x0043)},
/* Belkin */
{USB_DEVICE(0x050d, 0x805E)},
+ {USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
/* Sitecom */
{USB_DEVICE(0x0df6, 0x0031)},
+ {USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
/* EnGenius */
{USB_DEVICE(0x1740, 0x9201)},
/* Dlink */
#include <linux/random.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include <asm/uaccess.h>
#ifdef ENABLE_DOT11D
#include <linux/wireless.h>
#include <linux/version.h>
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include "ieee80211.h"
#include "ieee80211.h"
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include "rtl819x_TS.h"
void TsSetupTimeOut(unsigned long data)
#include "r8192U_dm.h"
//#include "r8192xU_phyreg.h"
#include <linux/usb.h>
+#include <linux/slab.h>
// FIXME: check if 2.6.7 is ok
#ifdef CONFIG_RTL8192_PM
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <asm/ioctl.h>
#include <linux/ioport.h>
#include <asm/io.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/console.h>
#include <linux/screen_info.h>
#include <linux/serialP.h>
#include <linux/rcupdate.h>
#include <linux/compat.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/net_namespace.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include "udlfb.h"
* USA.
*/
+#include <linux/slab.h>
+
#include "usbip_common.h"
#include "stub.h"
* USA.
*/
+#include <linux/slab.h>
#include "usbip_common.h"
#include "stub.h"
* USA.
*/
+#include <linux/slab.h>
+
#include "usbip_common.h"
#include "stub.h"
#include "../../usb/core/hcd.h"
* USA.
*/
+#include <linux/slab.h>
+
#include "usbip_common.h"
#include "stub.h"
#include <linux/tcp.h>
#include <linux/in.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include "usbip_common.h"
/* version information */
{
struct usbip_task *eh = &ud->eh;
+ if (eh->thread == current)
+ return; /* do not wait for myself */
+
wait_for_completion(&eh->thread_done);
usbip_dbg_eh("usbip_eh has finished\n");
}
* USA.
*/
+#include <linux/slab.h>
#include "usbip_common.h"
#include "vhci.h"
* USA.
*/
+#include <linux/slab.h>
+
#include "usbip_common.h"
#include "vhci.h"
* USA.
*/
+#include <linux/slab.h>
+
#include "usbip_common.h"
#include "vhci.h"
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/uaccess.h>
dev_info(&pdev->dev, "VME Write and flush and error check is %s\n",
err_chk ? "enabled" : "disabled");
- if (tsi148_crcsr_init(tsi148_bridge, pdev))
+ if (tsi148_crcsr_init(tsi148_bridge, pdev)) {
dev_err(&pdev->dev, "CR/CSR configuration failed.\n");
goto err_crcsr;
+ }
retval = vme_register_bridge(tsi148_bridge);
if (retval != 0) {
#include <linux/pagemap.h>
#include <linux/pci.h>
#include <linux/semaphore.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/syscalls.h>
#include <linux/types.h>
#include <linux/syscalls.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include "vme.h"
#include "vme_bridge.h"
#include "iowpa.h"
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
//#define DEBUG
/*--------------------- Static Definitions -------------------------*/
#include "wb35reg_f.h"
#include <linux/usb.h>
+#include <linux/slab.h>
extern void phy_calibration_winbond(struct hw_data *phw_data, u32 frequency);
//
//============================================================================
#include <linux/usb.h>
+#include <linux/slab.h>
#include "core.h"
#include "sysdef.h"
//
//============================================================================
#include <linux/usb.h>
+#include <linux/gfp.h>
#include "wb35tx_f.h"
#include "mds_f.h"
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <wl_version.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
// #include <linux/sched.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
-#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/string.h>
//#include <linux/timer.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/skbuff.h>
-#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/kernel.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
/*================================================================*/
/* System Includes */
#include <linux/ihex.h>
+#include <linux/slab.h>
/*================================================================*/
/* Local Constants */
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/tc.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/kdev_t.h>
#include <linux/idr.h>
#include <linux/thermal.h>
tz->temp_input.attr.attr.name = tz->temp_input.name;
tz->temp_input.attr.attr.mode = 0444;
tz->temp_input.attr.show = temp_input_show;
+ sysfs_attr_init(&tz->temp_input.attr.attr);
result = device_create_file(hwmon->device, &tz->temp_input.attr);
if (result)
goto unregister_hwmon_device;
tz->temp_crit.attr.attr.name = tz->temp_crit.name;
tz->temp_crit.attr.attr.mode = 0444;
tz->temp_crit.attr.show = temp_crit_show;
+ sysfs_attr_init(&tz->temp_crit.attr.attr);
result = device_create_file(hwmon->device,
&tz->temp_crit.attr);
if (result)
goto release_idr;
sprintf(dev->attr_name, "cdev%d_trip_point", dev->id);
+ sysfs_attr_init(&dev->attr.attr);
dev->attr.attr.name = dev->attr_name;
dev->attr.attr.mode = 0444;
dev->attr.show = thermal_cooling_device_trip_point_show;
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/idr.h>
#include <linux/sched.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include <linux/uio_driver.h>
+#include <linux/slab.h>
#define PCI_VENDOR_ID_AEC 0xaecb
#define PCI_DEVICE_ID_AEC_VITCLTC 0x6250
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/uio_driver.h>
#include <asm/io.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/uio_driver.h>
#define PCI_VENDOR_ID_HILSCHER 0x15CF
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/uio_driver.h>
#include <linux/spinlock.h>
#include <linux/platform_device.h>
#include <linux/uio_driver.h>
#include <linux/stringify.h>
+#include <linux/slab.h>
#define DRIVER_NAME "uio_pdrv"
#include <linux/interrupt.h>
#include <linux/stringify.h>
#include <linux/pm_runtime.h>
+#include <linux/slab.h>
#define DRIVER_NAME "uio_pdrv_genirq"
#include <linux/pci.h>
#include <linux/uio_driver.h>
#include <linux/io.h>
+#include <linux/slab.h>
/* ID's for SERCOS III PCI card (PLX 9030) */
#define SERCOS_SUB_VENDOR_ID 0x1971
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/firmware.h>
-#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/c67x00.h>
*/
#include <linux/kthread.h>
+#include <linux/slab.h>
#include "c67x00.h"
#include "c67x00-hcd.h"
{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */
+ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
+ },
/* Nokia S60 phones expose two ACM channels. The first is
* a modem and is picked up by the standard AT-command
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/kref.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/usb.h>
#include <linux/usb/tmc.h>
config USB_OTG
bool
depends on USB && EXPERIMENTAL
- select USB_SUSPEND
+ depends on USB_SUSPEND
default n
#include <linux/fs.h>
#include <linux/mm.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/poll.h>
#include <linux/usb.h>
#include <linux/smp_lock.h>
*/
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include <linux/pm_runtime.h>
intf->condition = USB_INTERFACE_BINDING;
- /* Bound interfaces are initially active. They are
+ /* Probed interfaces are initially active. They are
* runtime-PM-enabled only if the driver has autosuspend support.
* They are sensitive to their children's power states.
*/
iface->condition = USB_INTERFACE_BOUND;
- /* Bound interfaces are initially active. They are
+ /* Claimed interfaces are initially inactive (suspended). They are
* runtime-PM-enabled only if the driver has autosuspend support.
* They are sensitive to their children's power states.
*/
- pm_runtime_set_active(dev);
+ pm_runtime_set_suspended(dev);
pm_suspend_ignore_children(dev, false);
if (driver->supports_autosuspend)
pm_runtime_enable(dev);
static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
{
int status = 0;
- int i = 0;
+ int i = 0, n = 0;
struct usb_interface *intf;
if (udev->state == USB_STATE_NOTATTACHED ||
/* Suspend all the interfaces and then udev itself */
if (udev->actconfig) {
- for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ n = udev->actconfig->desc.bNumInterfaces;
+ for (i = n - 1; i >= 0; --i) {
intf = udev->actconfig->interface[i];
status = usb_suspend_interface(udev, intf, msg);
if (status != 0)
/* If the suspend failed, resume interfaces that did get suspended */
if (status != 0) {
msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
- while (--i >= 0) {
+ while (++i < n) {
intf = udev->actconfig->interface[i];
usb_resume_interface(udev, intf, msg, 0);
}
return status;
}
+static void choose_wakeup(struct usb_device *udev, pm_message_t msg)
+{
+ int w, i;
+ struct usb_interface *intf;
+
+ /* Remote wakeup is needed only when we actually go to sleep.
+ * For things like FREEZE and QUIESCE, if the device is already
+ * autosuspended then its current wakeup setting is okay.
+ */
+ if (msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_QUIESCE) {
+ if (udev->state != USB_STATE_SUSPENDED)
+ udev->do_remote_wakeup = 0;
+ return;
+ }
+
+ /* If remote wakeup is permitted, see whether any interface drivers
+ * actually want it.
+ */
+ w = 0;
+ if (device_may_wakeup(&udev->dev) && udev->actconfig) {
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+ intf = udev->actconfig->interface[i];
+ w |= intf->needs_remote_wakeup;
+ }
+ }
+
+ /* If the device is autosuspended with the wrong wakeup setting,
+ * autoresume now so the setting can be changed.
+ */
+ if (udev->state == USB_STATE_SUSPENDED && w != udev->do_remote_wakeup)
+ pm_runtime_resume(&udev->dev);
+ udev->do_remote_wakeup = w;
+}
+
/* The device lock is held by the PM core */
int usb_suspend(struct device *dev, pm_message_t msg)
{
struct usb_device *udev = to_usb_device(dev);
do_unbind_rebind(udev, DO_UNBIND);
- udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+ choose_wakeup(udev, msg);
return usb_suspend_both(udev, msg);
}
#include <linux/kernel.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/idr.h>
#include <linux/usb.h>
#include "usb.h"
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/rwsem.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/usb.h>
* than a vendor-specific driver. */
else if (udev->descriptor.bDeviceClass !=
USB_CLASS_VENDOR_SPEC &&
- (!desc || desc->bInterfaceClass !=
+ (desc && desc->bInterfaceClass !=
USB_CLASS_VENDOR_SPEC)) {
best = c;
break;
*dentry = NULL;
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(dentry)) {
+ if (!IS_ERR(*dentry)) {
if ((mode & S_IFMT) == S_IFDIR)
error = usbfs_mkdir (parent->d_inode, *dentry, mode);
else
error = usbfs_create (parent->d_inode, *dentry, mode);
} else
- error = PTR_ERR(dentry);
+ error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
return error;
EXPORT_SYMBOL_GPL(__usb_get_extra_descriptor);
/**
- * usb_buffer_alloc - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
+ * usb_alloc_coherent - allocate dma-consistent buffer for URB_NO_xxx_DMA_MAP
* @dev: device the buffer will be used with
* @size: requested buffer size
* @mem_flags: affect whether allocation may block
* architectures where CPU caches are not DMA-coherent. On systems without
* bus-snooping caches, these buffers are uncached.
*
- * When the buffer is no longer used, free it with usb_buffer_free().
+ * When the buffer is no longer used, free it with usb_free_coherent().
*/
-void *usb_buffer_alloc(struct usb_device *dev, size_t size, gfp_t mem_flags,
- dma_addr_t *dma)
+void *usb_alloc_coherent(struct usb_device *dev, size_t size, gfp_t mem_flags,
+ dma_addr_t *dma)
{
if (!dev || !dev->bus)
return NULL;
return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
}
-EXPORT_SYMBOL_GPL(usb_buffer_alloc);
+EXPORT_SYMBOL_GPL(usb_alloc_coherent);
/**
- * usb_buffer_free - free memory allocated with usb_buffer_alloc()
+ * usb_free_coherent - free memory allocated with usb_alloc_coherent()
* @dev: device the buffer was used with
* @size: requested buffer size
* @addr: CPU address of buffer
* @dma: DMA address of buffer
*
* This reclaims an I/O buffer, letting it be reused. The memory must have
- * been allocated using usb_buffer_alloc(), and the parameters must match
+ * been allocated using usb_alloc_coherent(), and the parameters must match
* those provided in that allocation request.
*/
-void usb_buffer_free(struct usb_device *dev, size_t size, void *addr,
- dma_addr_t dma)
+void usb_free_coherent(struct usb_device *dev, size_t size, void *addr,
+ dma_addr_t dma)
{
if (!dev || !dev->bus)
return;
return;
hcd_buffer_free(dev->bus, size, addr, dma);
}
-EXPORT_SYMBOL_GPL(usb_buffer_free);
+EXPORT_SYMBOL_GPL(usb_free_coherent);
/**
* usb_buffer_map - create DMA mapping(s) for an urb
{
struct at91_udc *udc = _udc;
u32 rescans = 5;
+ int disable_clock = 0;
+
+ if (!udc->clocked) {
+ clk_on(udc);
+ disable_clock = 1;
+ }
while (rescans--) {
u32 status;
}
}
+ if (disable_clock)
+ clk_off(udc);
+
return IRQ_HANDLED;
}
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
*/
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
/* #define VERBOSE_DEBUG */
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
* Licensed under the GPL-2 or later.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <asm/atomic.h>
/* #define VERBOSE_DEBUG */
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include "u_ether.h"
/* #define VERBOSE_DEBUG */
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
/* #define VERBOSE_DEBUG */
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
* 02110-1301 USA
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
/* #define VERBOSE_DEBUG */
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
* either version 2 of that License or (at your option) any later version.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
/* #define VERBOSE_DEBUG */
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/etherdevice.h>
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
*/
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "lh7a40x_udc.h"
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
-#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/netdevice.h>
#include <linux/seq_file.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
u32 epctrl;
u32 mps;
int dir_in;
+ int ret = 0;
dev_dbg(hsotg->dev,
"%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
case USB_ENDPOINT_XFER_ISOC:
dev_err(hsotg->dev, "no current ISOC support\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
case USB_ENDPOINT_XFER_BULK:
epctrl |= S3C_DxEPCTL_EPType_Bulk;
/* enable the endpoint interrupt */
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+out:
spin_unlock_irqrestore(&hs_ep->lock, flags);
- return 0;
+ return ret;
}
static int s3c_hsotg_ep_disable(struct usb_ep *ep)
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/ctype.h>
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/device.h>
#include <linux/ctype.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/slab.h>
#include "u_serial.h"
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include "../core/hcd.h"
*/
ehci->periodic_size = DEFAULT_I_TDPS;
INIT_LIST_HEAD(&ehci->cached_itd_list);
+ INIT_LIST_HEAD(&ehci->cached_sitd_list);
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
return retval;
* this bit; seems too long to spin routinely...
*/
retval = handshake(ehci, status_reg,
- PORT_RESET, 0, 750);
+ PORT_RESET, 0, 1000);
if (retval != 0) {
ehci_err (ehci, "port %d reset error %d\n",
wIndex + 1, retval);
static void ehci_mem_cleanup (struct ehci_hcd *ehci)
{
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
if (ehci->async)
qh_put (ehci->async);
ehci->async = NULL;
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
+#include <linux/slab.h>
#include <mach/mxc_ehci.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <plat/usb.h>
/*
}
snprintf(supply, sizeof(supply), "hsusb%d", i);
omap->regulator[i] = regulator_get(omap->dev, supply);
- if (IS_ERR(omap->regulator[i]))
+ if (IS_ERR(omap->regulator[i])) {
+ omap->regulator[i] = NULL;
dev_dbg(&pdev->dev,
"failed to get ehci port%d regulator\n", i);
- else
+ } else {
regulator_enable(omap->regulator[i]);
+ }
}
ret = omap_start_ehc(omap, hcd);
ehci_writel(ehci, cmd, &ehci->regs->command);
/* posted write ... */
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
ehci->next_uframe = -1;
return 0;
(stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out");
}
iso_stream_put (ehci, stream);
- /* OK to recycle this SITD now that its completion callback ran. */
+
done:
sitd->urb = NULL;
- sitd->stream = NULL;
- list_move(&sitd->sitd_list, &stream->free_list);
- iso_stream_put(ehci, stream);
-
+ if (ehci->clock_frame != sitd->frame) {
+ /* OK to recycle this SITD now. */
+ sitd->stream = NULL;
+ list_move(&sitd->sitd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ } else {
+ /* HW might remember this SITD, so we can't recycle it yet.
+ * Move it to a safe place until a new frame starts.
+ */
+ list_move(&sitd->sitd_list, &ehci->cached_sitd_list);
+ if (stream->refcount == 2) {
+ /* If iso_stream_put() were called here, stream
+ * would be freed. Instead, just prevent reuse.
+ */
+ stream->ep->hcpriv = NULL;
+ stream->ep = NULL;
+ }
+ }
return retval;
}
/*-------------------------------------------------------------------------*/
-static void free_cached_itd_list(struct ehci_hcd *ehci)
+static void free_cached_lists(struct ehci_hcd *ehci)
{
struct ehci_itd *itd, *n;
+ struct ehci_sitd *sitd, *sn;
list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
struct ehci_iso_stream *stream = itd->stream;
list_move(&itd->itd_list, &stream->free_list);
iso_stream_put(ehci, stream);
}
+
+ list_for_each_entry_safe(sitd, sn, &ehci->cached_sitd_list, sitd_list) {
+ struct ehci_iso_stream *stream = sitd->stream;
+ sitd->stream = NULL;
+ list_move(&sitd->sitd_list, &stream->free_list);
+ iso_stream_put(ehci, stream);
+ }
}
/*-------------------------------------------------------------------------*/
clock_frame = -1;
}
if (ehci->clock_frame != clock_frame) {
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
ehci->clock_frame = clock_frame;
}
clock %= mod;
clock = now;
clock_frame = clock >> 3;
if (ehci->clock_frame != clock_frame) {
- free_cached_itd_list(ehci);
+ free_cached_lists(ehci);
ehci->clock_frame = clock_frame;
}
} else {
int next_uframe; /* scan periodic, start here */
unsigned periodic_sched; /* periodic activity count */
- /* list of itds completed while clock_frame was still active */
+ /* list of itds & sitds completed while clock_frame was still active */
struct list_head cached_itd_list;
+ struct list_head cached_sitd_list;
unsigned clock_frame;
/* per root hub port */
clear_bit (action, &ehci->actions);
}
-static void free_cached_itd_list(struct ehci_hcd *ehci);
+static void free_cached_lists(struct ehci_hcd *ehci);
/*-------------------------------------------------------------------------*/
#include <linux/usb.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/slab.h>
#include <asm/qe.h>
#include <asm/fsl_gtm.h>
#include "../core/hcd.h"
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/usb.h>
#include "../core/hcd.h"
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/usb.h>
#include "../core/hcd.h"
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/io.h>
#include <linux/usb.h>
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/workqueue.h>
#include <linux/wait.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "../core/hcd.h"
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/isp116x.h>
#include <linux/platform_device.h>
*/
if (at91_suspend_entering_slow_clock()) {
ohci_usb_reset (ohci);
+ /* flush the writes */
+ (void) ohci_readl (ohci, &ohci->regs->control);
at91_stop_clock();
}
#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
#endif
-#define CFGCHIP2 DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG)
+#define CFGCHIP2 DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
static struct clk *usb11_clk;
static struct clk *usb20_clk;
u16 wLength
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ports = hcd_to_bus (hcd)->root_hub->maxchild;
+ int ports = ohci->num_ports;
u32 temp;
int retval = 0;
*/
#include <linux/irq.h>
+#include <linux/slab.h>
static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t *urb_priv)
{
if (qh->dummy == NULL) {
oxu_dbg(oxu, "no dummy td\n");
oxu->qh_used[i] = 0;
-
- return NULL;
+ qh = NULL;
+ goto unlock;
}
oxu->qh_used[i] = 1;
}
-
+unlock:
spin_unlock(&oxu->mem_lock);
return qh;
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/irq.h>
+#include <linux/slab.h>
#include <asm/cacheflush.h>
#include "../core/hcd.h"
/* port status seems weird until after reset, so
* force the reset and make khubd clean up later.
*/
- if (sl811->stat_insrmv & 1)
- sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
- else
+ if (irqstat & SL11H_INTMASK_RD)
sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+ else
+ sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
* (C) Copyright 1999-2001 Johannes Erdfelt
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/debugfs.h>
#include <linux/smp_lock.h>
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/dma-mapping.h>
#include <linux/uwb/umc.h>
#include <linux/usb.h>
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/dma-mapping.h>
#include <linux/uwb/umc.h>
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/dma-mapping.h>
#include <linux/uwb/umc.h>
#include <linux/usb.h>
*/
#include <linux/kernel.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/uwb/umc.h>
#include <linux/usb.h>
#include <linux/usb.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/dmapool.h>
#include "xhci.h"
return EP_INTERVAL(interval);
}
+/* The "Mult" field in the endpoint context is only set for SuperSpeed devices.
+ * High speed endpoint descriptors can define "the number of additional
+ * transaction opportunities per microframe", but that goes in the Max Burst
+ * endpoint context field.
+ */
+static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ if (udev->speed != USB_SPEED_SUPER || !ep->ss_ep_comp)
+ return 0;
+ return ep->ss_ep_comp->desc.bmAttributes;
+}
+
static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
return type;
}
+/* Return the maximum endpoint service interval time (ESIT) payload.
+ * Basically, this is the maxpacket size, multiplied by the burst size
+ * and mult size.
+ */
+static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
+ struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ int max_burst;
+ int max_packet;
+
+ /* Only applies for interrupt or isochronous endpoints */
+ if (usb_endpoint_xfer_control(&ep->desc) ||
+ usb_endpoint_xfer_bulk(&ep->desc))
+ return 0;
+
+ if (udev->speed == USB_SPEED_SUPER) {
+ if (ep->ss_ep_comp)
+ return ep->ss_ep_comp->desc.wBytesPerInterval;
+ xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+ /* Assume no bursts, no multiple opportunities to send. */
+ return ep->desc.wMaxPacketSize;
+ }
+
+ max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
+ /* A 0 in max burst means 1 transfer per ESIT */
+ return max_packet * (max_burst + 1);
+}
+
int xhci_endpoint_init(struct xhci_hcd *xhci,
struct xhci_virt_device *virt_dev,
struct usb_device *udev,
struct xhci_ring *ep_ring;
unsigned int max_packet;
unsigned int max_burst;
+ u32 max_esit_payload;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
+ ep_ctx->ep_info |= EP_MULT(xhci_get_endpoint_mult(udev, ep));
/* FIXME dig Mult and streams info out of ep companion desc */
default:
BUG();
}
+ max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
+ ep_ctx->tx_info = MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload);
+
+ /*
+ * XXX no idea how to calculate the average TRB buffer length for bulk
+ * endpoints, as the driver gives us no clue how big each scatter gather
+ * list entry (or buffer) is going to be.
+ *
+ * For isochronous and interrupt endpoints, we set it to the max
+ * available, until we have new API in the USB core to allow drivers to
+ * declare how much bandwidth they actually need.
+ *
+ * Normally, it would be calculated by taking the total of the buffer
+ * lengths in the TD and then dividing by the number of TRBs in a TD,
+ * including link TRBs, No-op TRBs, and Event data TRBs. Since we don't
+ * use Event Data TRBs, and we don't chain in a link TRB on short
+ * transfers, we're basically dividing by 1.
+ */
+ ep_ctx->tx_info |= AVG_TRB_LENGTH_FOR_EP(max_esit_payload);
+
/* FIXME Debug endpoint context */
return 0;
}
*/
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include "xhci.h"
/*
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include "xhci.h"
#define MAX_PACKET_MASK (0xffff << 16)
#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
+/* tx_info bitmasks */
+#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
+#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
+
/**
* struct xhci_input_control_context
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/backlight.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#define DRIVER_AUTHOR "Oliver Bock (bock@tfh-berlin.de)"
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/errno.h>
#include <linux/module.h>
+#include <linux/slab.h>
static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x05ac, 0x8300)},
#include <linux/string.h>
#include <linux/kd.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
#include <linux/spinlock.h>
#include <linux/errno.h>
#include <linux/poll.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include "sisusb.h"
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
u16 textlength;
u8 shadow_power; /* for PM */
+ u8 has_interface_pm;
};
/* sysfs_streq can't replace this completely
{
int rc;
- if (!mydev->shadow_power && mydev->powered) {
+ if (mydev->powered && !mydev->has_interface_pm) {
rc = usb_autopm_get_interface(mydev->intf);
if (rc < 0)
return;
+ mydev->has_interface_pm = 1;
}
+ if (mydev->shadow_power != 1)
+ return;
+
rc = usb_control_msg(mydev->udev,
usb_sndctrlpipe(mydev->udev, 0),
0x12,
if (rc < 0)
dev_dbg(&mydev->udev->dev, "power retval = %d\n", rc);
- if (mydev->shadow_power && !mydev->powered)
+ if (!mydev->powered && mydev->has_interface_pm) {
usb_autopm_put_interface(mydev->intf);
+ mydev->has_interface_pm = 0;
+ }
}
static void update_display_mode(struct usb_sevsegdev *mydev)
mydev->intf = interface;
usb_set_intfdata(interface, mydev);
+ /* PM */
+ mydev->shadow_power = 1; /* currently active */
+ mydev->has_interface_pm = 0; /* have not issued autopm_get */
+
/*set defaults */
mydev->textmode = 0x02; /* ascii mode */
mydev->mode_msb = 0x06; /* 6 characters */
#include <linux/delay.h>
#include <linux/completion.h>
#include <linux/kref.h>
+#include <linux/slab.h>
/*
* Version Information
#include <linux/mm.h>
#include <linux/smp_lock.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/mutex.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/fs.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include <linux/mutex.h>
#include <linux/debugfs.h>
default y if (BF52x && !BF522 && !BF523)
comment "DaVinci 35x and 644x USB support"
- depends on USB_MUSB_HDRC && ARCH_DAVINCI
+ depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
comment "OMAP 243x high speed USB support"
depends on USB_MUSB_HDRC && ARCH_OMAP2430
obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
-ifeq ($(CONFIG_ARCH_DAVINCI),y)
+ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
musb_hdrc-objs += davinci.o
endif
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/gpio.h>
spin_unlock_irqrestore(&musb->lock, flags);
- /* REVISIT we sometimes get spurious IRQs on g_ep0
- * not clear why... fall in BF54x too.
- */
- if (retval != IRQ_HANDLED)
- DBG(5, "spurious?\n");
-
- return IRQ_HANDLED;
+ return retval;
}
static void musb_conn_timer_handler(unsigned long _musb)
*/
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include "musb_core.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/delay.h>
return 0;
fail:
+ clk_disable(musb->clock);
+
usb_nop_xceiv_unregister();
return -ENODEV;
}
spin_lock_irqsave(&musb->lock, flags);
musb_platform_disable(musb);
musb_generic_disable(musb);
- if (musb->clock) {
+ if (musb->clock)
clk_put(musb->clock);
- musb->clock = NULL;
- }
spin_unlock_irqrestore(&musb->lock, flags);
/* FIXME power down */
put_device(musb->xceiv->dev);
#endif
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
- musb_platform_exit(musb);
- musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-
- if (musb->clock) {
- clk_disable(musb->clock);
- clk_put(musb->clock);
- }
-
#ifdef CONFIG_USB_MUSB_HDRC_HCD
usb_put_hcd(musb_to_hcd(musb));
#else
*/
if (!plat) {
dev_dbg(dev, "no platform_data?\n");
- return -ENODEV;
+ status = -ENODEV;
+ goto fail0;
}
+
switch (plat->mode) {
case MUSB_HOST:
#ifdef CONFIG_USB_MUSB_HDRC_HCD
#endif
default:
dev_err(dev, "incompatible Kconfig role setting\n");
- return -EINVAL;
+ status = -EINVAL;
+ goto fail0;
}
/* allocate */
musb = allocate_instance(dev, plat->config, ctrl);
- if (!musb)
- return -ENOMEM;
+ if (!musb) {
+ status = -ENOMEM;
+ goto fail0;
+ }
spin_lock_init(&musb->lock);
musb->board_mode = plat->mode;
if (IS_ERR(musb->clock)) {
status = PTR_ERR(musb->clock);
musb->clock = NULL;
- goto fail;
+ goto fail1;
}
}
*/
musb->isr = generic_interrupt;
status = musb_platform_init(musb);
-
if (status < 0)
- goto fail;
+ goto fail2;
+
if (!musb->isr) {
status = -ENODEV;
- goto fail2;
+ goto fail3;
}
#ifndef CONFIG_MUSB_PIO_ONLY
? MUSB_CONTROLLER_MHDRC
: MUSB_CONTROLLER_HDRC, musb);
if (status < 0)
- goto fail2;
+ goto fail3;
#ifdef CONFIG_USB_MUSB_OTG
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
if (request_irq(nIrq, musb->isr, 0, dev_name(dev), musb)) {
dev_err(dev, "request_irq %d failed!\n", nIrq);
status = -ENODEV;
- goto fail2;
+ goto fail3;
}
musb->nIrq = nIrq;
/* FIXME this handles wakeup irqs wrong */
musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
- if (status)
- goto fail;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb->xceiv->state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
- if (status)
- goto fail;
DBG(1, "%s mode, status %d, dev%02x\n",
is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
musb_readb(musb->mregs, MUSB_DEVCTL));
}
+ if (status < 0)
+ goto fail3;
#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
-#endif
if (status)
- goto fail2;
+ goto fail4;
+#endif
dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n",
({char *s;
return 0;
-fail2:
+fail4:
+ if (!is_otg_enabled(musb) && is_host_enabled(musb))
+ usb_remove_hcd(musb_to_hcd(musb));
+ else
+ musb_gadget_cleanup(musb);
+
+fail3:
+ if (musb->irq_wake)
+ device_init_wakeup(dev, 0);
musb_platform_exit(musb);
-fail:
- dev_err(musb->controller,
- "musb_init_controller failed with status %d\n", status);
+fail2:
if (musb->clock)
clk_put(musb->clock);
- device_init_wakeup(dev, 0);
+
+fail1:
+ dev_err(musb->controller,
+ "musb_init_controller failed with status %d\n", status);
+
musb_free(musb);
+fail0:
+
return status;
}
/* clobbered by use_dma=n */
orig_dma_mask = dev->dma_mask;
#endif
-
status = musb_init_controller(dev, irq, base);
if (status < 0)
iounmap(base);
if (musb->board_mode == MUSB_HOST)
usb_remove_hcd(musb_to_hcd(musb));
#endif
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ musb_platform_exit(musb);
+ musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+
musb_free(musb);
iounmap(ctrl_base);
device_init_wakeup(&pdev->dev, 0);
if (is_host_enabled(musb)) {
musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+ musb_context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
}
musb_context.power = musb_readb(musb_base, MUSB_POWER);
musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
if (is_host_enabled(musb)) {
musb_writew(musb_base, MUSB_FRAME, musb_context.frame);
musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode);
+ musb_write_ulpi_buscontrol(musb->mregs, musb_context.busctl);
}
musb_writeb(musb_base, MUSB_POWER, musb_context.power);
musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe);
u16 frame;
u8 index, testmode;
- u8 devctl, misc;
+ u8 devctl, busctl, misc;
struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
};
#include <linux/moduleparam.h>
#include <linux/stat.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include "musb_core.h"
* odd, rare, error prone, but legal.
*/
kfree(qh);
+ qh = NULL;
ret = 0;
} else
ret = musb_schedule(musb, qh,
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include "musb_core.h"
#include "musbhsdma.h"
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/clk.h>
musb_platform_suspend(musb);
- clk_put(musb->clock);
- musb->clock = NULL;
-
return 0;
}
#define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf)
#define TUSB_REV_MINOR(reg_val) (reg_val & 0xf)
+#ifdef CONFIG_PM
+/* REVISIT: These should be only needed if somebody implements off idle */
+void musb_platform_save_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+}
+
+void musb_platform_restore_context(struct musb *musb,
+ struct musb_context_registers *musb_context)
+{
+}
+#endif
+
/*
* Checks the revision. We need to use the DMA register as 3.0 does not
* have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV.
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <plat/dma.h>
#include <plat/mux.h>
struct tusb_omap_dma *tusb_dma;
- void __iomem *dma_addr;
+ dma_addr_t dma_addr;
u32 len;
u16 packet_sz;
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
+ struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *ep_conf = hw_ep->conf;
void __iomem *mbase = musb->mregs;
DBG(3, "Using PIO for remaining %lu bytes\n", pio);
buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
if (chdat->tx) {
- dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
- chdat->transfer_len, DMA_TO_DEVICE);
+ dma_unmap_single(dev, chdat->dma_addr,
+ chdat->transfer_len,
+ DMA_TO_DEVICE);
musb_write_fifo(hw_ep, pio, buf);
} else {
+ dma_unmap_single(dev, chdat->dma_addr,
+ chdat->transfer_len,
+ DMA_FROM_DEVICE);
musb_read_fifo(hw_ep, pio, buf);
- dma_cache_maint(phys_to_virt((u32)chdat->dma_addr),
- chdat->transfer_len, DMA_FROM_DEVICE);
}
channel->actual_len += pio;
}
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
+ struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *mbase = musb->mregs;
void __iomem *ep_conf = hw_ep->conf;
chdat->packet_sz = packet_sz;
chdat->len = len;
channel->actual_len = 0;
- chdat->dma_addr = (void __iomem *)dma_addr;
+ chdat->dma_addr = dma_addr;
channel->status = MUSB_DMA_STATUS_BUSY;
/* Since we're recycling dma areas, we need to clean or invalidate */
if (chdat->tx)
- dma_cache_maint(phys_to_virt(dma_addr), len, DMA_TO_DEVICE);
+ dma_map_single(dev, phys_to_virt(dma_addr), len,
+ DMA_TO_DEVICE);
else
- dma_cache_maint(phys_to_virt(dma_addr), len, DMA_FROM_DEVICE);
+ dma_map_single(dev, phys_to_virt(dma_addr), len,
+ DMA_FROM_DEVICE);
/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
if ((dma_addr & 0x3) == 0) {
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/otg.h>
+#include <linux/slab.h>
struct nop_usb_xceiv {
struct otg_transceiver otg;
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/notifier.h>
+#include <linux/slab.h>
/* Register defines */
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
*/
#include <linux/tty.h>
+#include <linux/slab.h>
#include <linux/tty_flip.h>
#include <linux/circ_buf.h>
#include <linux/usb.h>
#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/tty.h>
+#include <linux/slab.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
* flags as the navman is rx only so cannot echo.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
+#include <linux/slab.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/bitops.h>
#include <linux/usb.h>
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
#define ZTE_PRODUCT_AC8710 0xfff1
#define ZTE_PRODUCT_AC2726 0xfff5
+#define ZTE_PRODUCT_AC8710T 0xffff
+
+/* ZTE PRODUCTS -- alternate vendor ID */
+#define ZTE_VENDOR_ID2 0x1d6b
+#define ZTE_PRODUCT_MF_330 0x0002
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
+#define CINTERION_VENDOR_ID 0x0681
+
/* some devices interfaces need special handling due to a number of reasons */
enum option_blacklist_reason {
OPTION_BLACKLIST_NONE = 0,
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011)},
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012)},
+ { USB_DEVICE(CINTERION_VENDOR_ID, 0x0047) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
+ { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
{ } /* Terminating entry */
};
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define PL2303_PRODUCT_ID_MMX 0x0612
#define PL2303_PRODUCT_ID_GPRS 0x0609
+#define PL2303_PRODUCT_ID_HCR331 0x331a
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */
#define SANWA_VENDOR_ID 0x11ad
#define SANWA_PRODUCT_ID 0x0001
+
+/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */
+#define ADLINK_VENDOR_ID 0x0b63
+#define ADLINK_ND6530_PRODUCT_ID 0x6530
#define CMOTECH_PRODUCT_CDU550 0x5553
#define CMOTECH_PRODUCT_CDX650 0x6512
+/* LG devices */
+#define LG_VENDOR_ID 0x1004
+#define LG_PRODUCT_VX4400_6000 0x6000 /* VX4400/VX6000/Rumor */
+
+/* Sanyo devices */
+#define SANYO_VENDOR_ID 0x0474
+#define SANYO_PRODUCT_KATANA_LX 0x0754 /* SCP-3800 (Katana LX) */
+
static struct usb_device_id id_table[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/jiffies.h>
#include <linux/errno.h>
#include <linux/tty.h>
+#include <linux/slab.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
{ USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+ { USB_DEVICE(0x03F0, 0x211D) }, /* HP ev2210 a.k.a MC5725 */
{ USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
+#include <linux/slab.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
-static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
-static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) },
+ { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
MODULE_FIRMWARE("mts_cdma.fw");
MODULE_FIRMWARE("mts_gsm.fw");
MODULE_FIRMWARE("mts_edge.fw");
+MODULE_FIRMWARE("mts_mt9234mu.fw");
+MODULE_FIRMWARE("mts_mt9234zba.fw");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
const struct firmware *fw_p;
char buf[32];
+ dbg("%s\n", __func__);
/* try ID specific firmware first, then try generic firmware */
sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
dev->descriptor.idProduct);
case MTS_EDGE_PRODUCT_ID:
strcpy(buf, "mts_edge.fw");
break;
- }
+ case MTS_MT9234MU_PRODUCT_ID:
+ strcpy(buf, "mts_mt9234mu.fw");
+ break;
+ case MTS_MT9234ZBA_PRODUCT_ID:
+ strcpy(buf, "mts_mt9234zba.fw");
+ break;
+ case MTS_MT9234ZBAOLD_PRODUCT_ID:
+ strcpy(buf, "mts_mt9234zba.fw");
+ break; }
}
if (buf[0] == '\0') {
if (tdev->td_is_3410)
return -ENOENT;
}
if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
- dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+ dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
return -ENOENT;
}
status = ti_do_download(dev, pipe, buffer, fw_p->size);
kfree(buffer);
} else {
+ dbg("%s ENOMEM\n", __func__);
status = -ENOMEM;
}
release_firmware(fw_p);
#define MTS_CDMA_PRODUCT_ID 0xF110
#define MTS_GSM_PRODUCT_ID 0xF111
#define MTS_EDGE_PRODUCT_ID 0xF112
+#define MTS_MT9234MU_PRODUCT_ID 0xF114
+#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
+#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
/* Commands */
#define TI_GET_VERSION 0x01
* 2 as published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
*/
#include <linux/usb.h>
+#include <linux/slab.h>
#include "usb.h"
#include "transport.h"
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/slab.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include "usb.h"
#include "transport.h"
*/
#include <linux/sched.h>
+#include <linux/gfp.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/usb/quirks.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/uwb.h>
#include <linux/usb/wusb.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/uwb.h>
+#include <linux/slab.h>
#include <linux/usb/wusb.h>
#include <linux/scatterlist.h>
#include <linux/jiffies.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include "wusbhc.h"
old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr);
keep_alives = 0;
for (cnt = 0;
- keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max;
+ keep_alives < WUIE_ELT_MAX && cnt < wusbhc->ports_max;
cnt++) {
unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout);
* - add timers that autoremove intervalled IEs?
*/
#include <linux/usb/wusb.h>
+#include <linux/slab.h>
#include "wusbhc.h"
/* Initialize the MMCIEs handling mechanism */
*
* wusbhc_rh_start_port_reset() ??? unimplemented
*/
+#include <linux/slab.h>
#include "wusbhc.h"
/*
* FIXME: docs
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/usb/ch9.h>
#include <linux/random.h>
#include "wusbhc.h"
*
* FIXME: docs
*/
+#include <linux/slab.h>
#include "wusbhc.h"
#include "wa-hc.h"
*/
#include <linux/workqueue.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include "wa-hc.h"
#include "wusbhc.h"
#include <linux/init.h>
#include <asm/atomic.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
#include "wusbhc.h"
#include "wa-hc.h"
*/
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/hash.h>
#include "wa-hc.h"
* FIXME: docs
*/
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/uwb.h>
#include "uwb-internal.h"
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kdev_t.h>
+#include <linux/slab.h>
#include "uwb-internal.h"
*/
#include <linux/kernel.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/uwb.h>
#include "uwb-internal.h"
*/
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "uwb-internal.h"
* uwb_est_get_size()
*/
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include "uwb-internal.h"
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/wusb.h>
#include <linux/usb/wusb-wa.h>
*/
#include <linux/delay.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <linux/uwb.h>
#include "i1480-dfu.h"
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/uwb.h>
#include <linux/usb/wusb.h>
* is being removed.
* i1480u_rm()
*/
+#include <linux/gfp.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
* i1480u_set_config():
*/
+#include <linux/slab.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
*
*/
+#include <linux/gfp.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include "i1480u-wlp.h"
* the times the MTU will be smaller than one page...
*/
+#include <linux/slab.h>
#include "i1480u-wlp.h"
enum {
* FIXME: docs
*/
+#include <linux/slab.h>
#include "uwb-internal.h"
/**
* FIXME: docs
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kdev_t.h>
#include <linux/kdev_t.h>
#include <linux/etherdevice.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include "uwb-internal.h"
*/
#include <linux/kernel.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include "uwb-internal.h"
*/
#include <linux/kernel.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include "uwb-internal.h"
*/
#include <linux/kernel.h>
#include <linux/uwb.h>
+#include <linux/slab.h>
#include <linux/random.h>
#include "uwb-internal.h"
#include <linux/device.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "uwb-internal.h"
* This file is released under the GNU GPL v2.
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/uwb/umc.h>
static void umc_device_release(struct device *dev)
* Handler functions are called normally uwbd_evt_handle_*().
*/
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/freezer.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/uwb.h>
#include <linux/uwb/whci.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/uwb/whci.h>
#include <linux/uwb/umc.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <linux/wlp.h>
#include "wlp-internal.h"
*/
#include <linux/wlp.h>
+#include <linux/slab.h>
#include "wlp-internal.h"
*/
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <linux/wlp.h>
#include "wlp-internal.h"
* FIXME: docs
*/
#include <linux/wlp.h>
+#include <linux/slab.h>
#include "wlp-internal.h"
*/
#include <linux/etherdevice.h> /* for is_valid_ether_addr */
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/wlp.h>
#include "wlp-internal.h"
#include <linux/workqueue.h>
#include <linux/rcupdate.h>
#include <linux/file.h>
+#include <linux/slab.h>
#include <linux/net.h>
#include <linux/if_packet.h>
mutex_lock(&vq->mutex);
vhost_disable_notify(vq);
- if (wmem < sock->sk->sk_sndbuf * 2)
+ if (wmem < sock->sk->sk_sndbuf / 2)
tx_poll_stop(net);
hdr_size = vq->hdr_size;
/* Verify that ring has been setup correctly. */
if (!vhost_vq_access_ok(vq)) {
r = -EFAULT;
- goto err;
+ goto err_vq;
}
sock = get_socket(fd);
if (IS_ERR(sock)) {
r = PTR_ERR(sock);
- goto err;
+ goto err_vq;
}
/* start polling new socket */
vhost_net_disable_vq(n, vq);
rcu_assign_pointer(vq->private_data, sock);
vhost_net_enable_vq(n, vq);
- mutex_unlock(&vq->mutex);
done:
if (oldsock) {
vhost_net_flush_vq(n, index);
fput(oldsock->file);
}
+
+err_vq:
+ mutex_unlock(&vq->mutex);
err:
mutex_unlock(&n->dev.mutex);
return r;
#include <linux/poll.h>
#include <linux/file.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <linux/net.h>
#include <linux/if_packet.h>
int log_all)
{
int i;
+
+ if (!mem)
+ return 0;
+
for (i = 0; i < mem->nregions; ++i) {
struct vhost_memory_region *m = mem->regions + i;
unsigned long a = m->userspace_addr;
if (r < 0)
break;
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
- if (IS_ERR(eventfp))
- return PTR_ERR(eventfp);
+ if (IS_ERR(eventfp)) {
+ r = PTR_ERR(eventfp);
+ break;
+ }
if (eventfp != vq->kick) {
pollstop = filep = vq->kick;
pollstart = vq->kick = eventfp;
if (r < 0)
break;
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
- if (IS_ERR(eventfp))
- return PTR_ERR(eventfp);
+ if (IS_ERR(eventfp)) {
+ r = PTR_ERR(eventfp);
+ break;
+ }
if (eventfp != vq->call) {
filep = vq->call;
ctx = vq->call_ctx;
if (r < 0)
break;
eventfp = f.fd == -1 ? NULL : eventfd_fget(f.fd);
- if (IS_ERR(eventfp))
- return PTR_ERR(eventfp);
+ if (IS_ERR(eventfp)) {
+ r = PTR_ERR(eventfp);
+ break;
+ }
if (eventfp != vq->error) {
filep = vq->error;
vq->error = eventfp;
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/ctype.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/backlight.h>
+#include <linux/gfp.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
* ATI Mach64 CT/VT/GT/LT Cursor Support
*/
-#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/string.h>
#include "radeonfb.h"
#include <linux/backlight.h>
+#include <linux/slab.h>
#ifdef CONFIG_PMAC_BACKLIGHT
#include <asm/backlight.h>
#include "radeonfb.h"
+
+#include <linux/slab.h>
+
#include "../edid.h"
static struct fb_var_screeninfo radeonfb_default_var = {
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/mach-au1x00/au1000.h>
#include <linux/interrupt.h>
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <asm/mach-au1x00/au1000.h>
#include "au1200fb.h"
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/mfd/88pm860x.h>
+#include <linux/slab.h>
#define MAX_BRIGHTNESS (0xFF)
#define MIN_BRIGHTNESS (0)
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/mfd/adp5520.h>
+#include <linux/slab.h>
struct adp5520_bl {
struct device *master;
#include <linux/backlight.h>
#include <linux/fb.h>
+#include <linux/gfp.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/backlight.h>
#include <linux/atmel_pwm.h>
#include <linux/atmel-pwm-bl.h>
+#include <linux/slab.h>
struct atmel_pwm_bl {
const struct atmel_pwm_bl_platform_data *pdata;
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/fb.h>
+#include <linux/slab.h>
#ifdef CONFIG_PMAC_BACKLIGHT
#include <asm/backlight.h>
#include <linux/lcd.h>
#include <linux/spi/spi.h>
#include <linux/spi/corgi_lcd.h>
+#include <linux/slab.h>
#include <asm/mach/sharpsl_param.h>
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/pci.h>
+#include <linux/slab.h>
/* The LVDS- and panel power controls sits on the
* GPIO port of the ISA bridge.
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/mfd/da903x.h>
+#include <linux/slab.h>
#define DA9030_WLED_CONTROL 0x25
#define DA9030_WLED_CP_EN (1 << 6)
#include <linux/init.h>
#include <linux/lcd.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/lcd.h>
+#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/ctype.h>
#include <linux/err.h>
#include <linux/fb.h>
+#include <linux/slab.h>
#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \
defined(CONFIG_LCD_CLASS_DEVICE_MODULE))
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/lcd.h>
#include <linux/init.h>
#include <linux/lcd.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spi/spi.h>
#include "ltv350qv.h"
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/mfd/max8925.h>
+#include <linux/slab.h>
#define MAX_BRIGHTNESS (0xff)
#define MIN_BRIGHTNESS (0)
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/backlight.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <plat/board.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
+#include <linux/slab.h>
#include <video/platform_lcd.h>
#include <linux/err.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
+#include <linux/slab.h>
struct pwm_bl_data {
struct pwm_device *pwm;
#include <linux/spi/tdo24m.h>
#include <linux/fb.h>
#include <linux/lcd.h>
+#include <linux/slab.h>
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
#include <linux/gpio.h>
#include <linux/fb.h>
#include <linux/backlight.h>
+#include <linux/slab.h>
#include <asm/mach/sharpsl_param.h>
#include <linux/device.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/lcd.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/backlight.h>
+#include <linux/slab.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/fb.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/gfp.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/fb.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "carminefb.h"
#include "carminefb_regs.h"
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/fb.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/io.h>
#include "fb_draw.h"
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/vt_kern.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/vt_kern.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/vt_kern.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/vt_kern.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/vt_kern.h>
#include <linux/console.h>
#include <linux/string.h>
#include <linux/kd.h>
-#include <linux/slab.h>
#include <linux/vt_kern.h>
#include <linux/vt_buffer.h>
#include <linux/selection.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/console.h>
+#include <linux/slab.h>
#include <video/da8xx-fb.h>
#define DRIVER_NAME "da8xx_lcdc"
#include <linux/idr.h>
#include <linux/err.h>
#include <linux/kdev_t.h>
+#include <linux/slab.h>
static ssize_t display_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
M_MBP_2, /* MacBook Pro 2nd gen */
M_MBP_SR, /* MacBook Pro (Santa Rosa) */
M_MBP_4, /* MacBook Pro, 4th gen */
+ M_MBP_5_1, /* MacBook Pro, 5,1th gen */
M_UNKNOWN /* placeholder */
};
[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
+ [M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
};
EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
+ EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
{},
};
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/i2c-algo-bit.h>
+#include <linux/slab.h>
#include "edid.h"
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
*
*/
#include <linux/fb.h>
+#include <linux/slab.h>
#define FB_CVT_CELLSIZE 8
#define FB_CVT_GTF_C 40
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <video/edid.h>
#ifdef CONFIG_PPC_OF
#include <asm/prom.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/console.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
goto error;
}
+ sysfs_attr_init(&machine_data->dev_attr.attr);
machine_data->dev_attr.attr.name = "monitor";
machine_data->dev_attr.attr.mode = S_IRUGO|S_IWUSR;
machine_data->dev_attr.show = show_monitor;
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/console.h>
FP_CRC, /* 0x458 */
};
+#define FP_PT2_HSP (1 << 22)
+#define FP_PT2_VSP (1 << 23)
#define FP_PT2_SCRC (1 << 27) /* shfclk free */
#define FP_PM_P (1 << 24) /* panel power ctl */
#include <linux/string.h>
#include <linux/console.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/fb.h>
u32 msrlo, msrhi;
write_fp(par, FP_PT1, 0);
- write_fp(par, FP_PT2, FP_PT2_SCRC);
+ temp = FP_PT2_SCRC;
+
+ if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ temp |= FP_PT2_HSP;
+
+ if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ temp |= FP_PT2_VSP;
+
+ write_fp(par, FP_PT2, temp);
write_fp(par, FP_DFC, FP_DFC_BC);
msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include "i810.h"
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include "matroxfb_base.h"
#include "matroxfb_maven.h"
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/i2c-algo-bit.h>
/* MGA-TVO I2C for G200, G400 */
#include "matroxfb_g450.h"
#include <linux/matroxfb.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#ifdef CONFIG_PPC_PMAC
#include "matroxfb_misc.h"
#include "matroxfb_DAC1064.h"
#include <linux/matroxfb.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
/* **************************************************** */
#include "matroxfb_DAC1064.h"
#include <linux/i2c.h>
#include <linux/matroxfb.h>
+#include <linux/slab.h>
#include <asm/div64.h>
#define MGATVO_B 1
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
* Fujitsu Carmine/Coral-P(A)/Lime framebuffer driver acceleration support
*
* (C) 2007 Alexander Shishkin <virtuoso@slind.org>
- * (C) 2009 Valentin Sitdikov <valentin.sitdikov@siemens.com>
+ * (C) 2009 Valentin Sitdikov <v.sitdikov@gmail.com>
* (C) 2009 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#if defined(CONFIG_OF)
#include <linux/of_platform.h>
#endif
info->fix.accel = 0xff; /*FIXME: add right define */
}
EXPORT_SYMBOL(mb862xxfb_init_accel);
+
+MODULE_LICENSE("GPL v2");
#include <linux/debugfs.h>
+#include <linux/slab.h>
#define BIG_BUFFER_SIZE (1024)
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/io.h>
* GNU General Public License for more details.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <mach/msm_fb.h>
static DECLARE_WAIT_QUEUE_HEAD(nt35399_vsync_wait);
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <mach/msm_fb.h>
#include <linux/clk.h>
#include <linux/file.h>
#include <linux/major.h>
+#include <linux/slab.h>
#include <mach/msm_iomap.h>
#include <mach/msm_fb.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/fb.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/freezer.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include <video/vga.h>
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "nv_type.h"
#include "nv_local.h"
#include "nv_proto.h"
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <plat/sram.h>
#include <plat/board.h>
*/
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/clk.h>
+#include <linux/gfp.h>
#include <mach/lcdc.h>
#include <plat/dma.h>
*/
#include <linux/platform_device.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <plat/dma.h>
return 0;
}
+static void generic_panel_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ dpi_set_timings(dssdev, timings);
+}
+
+static void generic_panel_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ *timings = dssdev->panel.timings;
+}
+
+static int generic_panel_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ return dpi_check_timings(dssdev, timings);
+}
+
static struct omap_dss_driver generic_driver = {
.probe = generic_panel_probe,
.remove = generic_panel_remove,
.suspend = generic_panel_suspend,
.resume = generic_panel_resume,
+ .set_timings = generic_panel_set_timings,
+ .get_timings = generic_panel_get_timings,
+ .check_timings = generic_panel_check_timings,
+
.driver = {
.name = "generic_panel",
.owner = THIS_MODULE,
#include <linux/gpio.h>
#include <linux/completion.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <plat/display.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <plat/display.h>
}
}
+ dss.dsi_clk_source = DSS_SRC_DSS1_ALWON_FCLK;
+ dss.dispc_clk_source = DSS_SRC_DSS1_ALWON_FCLK;
+
dss_save_context();
rev = dss_read_reg(DSS_REVISION);
#define DSS_SUBSYS_NAME "MANAGER"
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/kobject.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <plat/display.h>
#include <plat/cpu.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/bootmem.h>
#include <linux/completion.h>
static u32 omap_vram_def_sdram_size __initdata;
static u32 omap_vram_def_sdram_start __initdata;
-static void __init omap_vram_early_vram(char **p)
+static int __init omap_vram_early_vram(char *p)
{
- omap_vram_def_sdram_size = memparse(*p, p);
- if (**p == ',')
- omap_vram_def_sdram_start = simple_strtoul((*p) + 1, p, 16);
+ omap_vram_def_sdram_size = memparse(p, &p);
+ if (*p == ',')
+ omap_vram_def_sdram_start = simple_strtoul(p + 1, &p, 16);
+ return 0;
}
-__early_param("vram=", omap_vram_early_vram);
+early_param("vram", omap_vram_early_vram);
/*
* Called from map_io. We need to call to this early enough so that we
*/
#include <linux/module.h>
#include <linux/video_output.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <mach/gpio.h>
/*
* Map LCD controller registers.
*/
- fbi->reg_base = ioremap_nocache(res->start, res->end - res->start);
+ fbi->reg_base = ioremap_nocache(res->start, resource_size(res));
if (fbi->reg_base == NULL) {
ret = -ENOMEM;
goto failed;
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/spinlock_types.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/gfp.h>
#include <linux/clk.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/svga.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <asm/sh7760fb.h>
#include <linux/interrupt.h>
#include <linux/vmalloc.h>
#include <linux/ioctl.h>
+#include <linux/slab.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/atomic.h>
* 1) Enable Runtime PM
* 2) Force Runtime PM Resume since hardware is accessed from probe()
*/
+ priv->dev = &pdev->dev;
pm_runtime_enable(priv->dev);
pm_runtime_resume(priv->dev);
return 0;
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "no platform data defined\n");
- error = -EINVAL;
- goto err0;
+ return -EINVAL;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i = platform_get_irq(pdev, 0);
if (!res || i < 0) {
dev_err(&pdev->dev, "cannot get platform resources\n");
- error = -ENOENT;
- goto err0;
+ return -ENOENT;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "cannot allocate device data\n");
- error = -ENOMEM;
- goto err0;
+ return -ENOMEM;
}
+ platform_set_drvdata(pdev, priv);
+
error = request_irq(i, sh_mobile_lcdc_irq, IRQF_DISABLED,
dev_name(&pdev->dev), priv);
if (error) {
}
priv->irq = i;
- priv->dev = &pdev->dev;
- platform_set_drvdata(pdev, priv);
pdata = pdev->dev.platform_data;
j = 0;
info = ch->info;
if (info->fbdefio) {
- priv->ch->sglist = vmalloc(sizeof(struct scatterlist) *
+ ch->sglist = vmalloc(sizeof(struct scatterlist) *
info->fix.smem_len >> PAGE_SHIFT);
- if (!priv->ch->sglist) {
+ if (!ch->sglist) {
dev_err(&pdev->dev, "cannot allocate sglist\n");
goto err1;
}
}
return 0;
- err1:
+err1:
sh_mobile_lcdc_remove(pdev);
- err0:
+
return error;
}
int i;
for (i = 0; i < ARRAY_SIZE(priv->ch); i++)
- if (priv->ch[i].info->dev)
+ if (priv->ch[i].info && priv->ch[i].info->dev)
unregister_framebuffer(priv->ch[i].info);
sh_mobile_lcdc_stop(priv);
if (priv->dot_clk)
clk_put(priv->dot_clk);
- pm_runtime_disable(priv->dev);
+ if (priv->dev)
+ pm_runtime_disable(priv->dev);
if (priv->base)
iounmap(priv->base);
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <asm/io.h>
#include <linux/uaccess.h>
#include <video/sstfb.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
static int __devinit e3d_pci_register(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
+ struct device_node *of_node;
+ const char *device_type;
struct fb_info *info;
struct e3d_info *ep;
unsigned int line_length;
int err;
+ of_node = pci_device_to_OF_node(pdev);
+ if (!of_node) {
+ printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
+ pci_name(pdev));
+ return -ENODEV;
+ }
+
+ device_type = of_get_property(of_node, "device_type", NULL);
+ if (!device_type) {
+ printk(KERN_INFO "e3d: Ignoring secondary output device "
+ "at %s\n", pci_name(pdev));
+ return -ENODEV;
+ }
+
err = pci_enable_device(pdev);
if (err < 0) {
printk(KERN_ERR "e3d: Cannot enable PCI device %s\n",
ep->info = info;
ep->pdev = pdev;
spin_lock_init(&ep->lock);
- ep->of_node = pci_device_to_OF_node(pdev);
- if (!ep->of_node) {
- printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
- pci_name(pdev));
- err = -ENODEV;
- goto err_release_fb;
- }
+ ep->of_node = of_node;
/* Read the PCI base register of the frame buffer, which we
* need in order to interpret the RAMDAC_VID_*FB* values in
#include <linux/string.h>
#include <linux/fb.h>
#include <linux/svga.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/fb.h>
-#include <linux/slab.h>
#include <asm/types.h>
#include <asm/io.h>
#include "fb_draw.h"
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/fb.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/selection.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/tc.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <video/vga.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <video/edid.h>
#include <video/uvesafb.h>
#ifdef CONFIG_X86
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
return 0;
}
-static int __devinit vesafb_probe(struct platform_device *dev)
+static int __init vesafb_probe(struct platform_device *dev)
{
struct fb_info *info;
int i, err;
}
static struct platform_driver vesafb_driver = {
- .probe = vesafb_probe,
.driver = {
.name = "vesafb",
},
/* ignore error return of fb_get_options */
fb_get_options("vesafb", &option);
vesafb_setup(option);
- ret = platform_driver_register(&vesafb_driver);
- if (!ret) {
- vesafb_device = platform_device_alloc("vesafb", 0);
+ vesafb_device = platform_device_alloc("vesafb", 0);
+ if (!vesafb_device)
+ return -ENOMEM;
- if (vesafb_device)
- ret = platform_device_add(vesafb_device);
- else
- ret = -ENOMEM;
+ ret = platform_device_add(vesafb_device);
+ if (!ret) {
+ ret = platform_driver_probe(&vesafb_driver, vesafb_probe);
+ if (ret)
+ platform_device_del(vesafb_device);
+ }
- if (ret) {
- platform_device_put(vesafb_device);
- platform_driver_unregister(&vesafb_driver);
- }
+ if (ret) {
+ platform_device_put(vesafb_device);
+ vesafb_device = NULL;
}
return ret;
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#define _MASTER_FILE
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/svga.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/vmalloc.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/fb.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/xilinxfb.h>
+#include <linux/slab.h>
#include <asm/dcr.h>
#define DRIVER_NAME "xilinxfb"
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/delay.h>
+#include <linux/slab.h>
struct virtio_balloon
{
num = min(num, ARRAY_SIZE(vb->pfns));
for (vb->num_pfns = 0; vb->num_pfns < num; vb->num_pfns++) {
- struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY);
+ struct page *page = alloc_page(GFP_HIGHUSER | __GFP_NORETRY |
+ __GFP_NOMEMALLOC | __GFP_NOWARN);
if (!page) {
if (printk_ratelimit())
dev_printk(KERN_INFO, &vb->vdev->dev,
#include <linux/module.h>
#include <linux/list.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/virtio.h>
#include <linux/virtio_config.h>
#include <linux/virtio_ring.h>
#include <linux/virtio_config.h>
#include <linux/device.h>
+#include <linux/slab.h>
/* virtio guest is communicating with a virtual "device" that actually runs on
* a host processor. Memory barriers are used to control SMP effects. */
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/vlynq.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
#include <linux/mfd/ds1wm.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
#include <linux/usb.h>
+#include <linux/slab.h>
#include "../w1_int.h"
#include "../w1.h"
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/w1-gpio.h>
#include "../w1.h"
#include <linux/device.h>
#include <linux/types.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
#include <linux/crc16.h>
#include <linux/platform_device.h>
#include <linux/mutex.h>
#include <linux/idr.h>
+#include <linux/gfp.h>
#include "../w1.h"
#include "../w1_int.h"
static inline int w1_DS18B20_convert_temp(u8 rom[9])
{
- int t = ((s16)rom[1] << 8) | rom[0];
- t = t*1000/16;
- return t;
+ s16 t = le16_to_cpup((__le16 *)rom);
+ return t*1000/16;
}
static inline int w1_DS18S20_convert_temp(u8 rom[9])
#include <linux/list.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include "w1.h"
#include "w1_log.h"
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
#include <linux/connector.h>
To compile this driver as a module, choose M here: the
module will be called softdog.
-config MAX63XX_WATCHDOG
- tristate "Max63xx watchdog"
- help
- Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
-
config WM831X_WATCHDOG
tristate "WM831x watchdog"
depends on MFD_WM831X
config OMAP_WATCHDOG
tristate "OMAP Watchdog"
- depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP3
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
help
- Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y'
- here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
+ Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y'
+ here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
config PNX4008_WATCHDOG
tristate "PNX4008 Watchdog"
To compile this driver as a module, choose M here: the
module will be called ts72xx_wdt.
+config MAX63XX_WATCHDOG
+ tristate "Max63xx watchdog"
+ depends on ARM && HAS_IOMEM
+ help
+ Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
# AVR32 Architecture
config AT32AP700X_WDT
*/
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/io.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#define TIMEOUT_MIN 1
#define TIMEOUT_MAX 2
#ifdef CONFIG_FSL_BOOKE
#define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15))
-#define WDTP_MASK (WDTP(0))
+#define WDTP_MASK (WDTP(0x3f))
#else
#define WDTP(x) (TCR_WP(x))
#define WDTP_MASK (TCR_WP_MASK)
return count;
}
-static const struct watchdog_info ident = {
+static struct watchdog_info ident = {
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
.identity = "PowerPC Book-E Watchdog",
};
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/clk.h>
+#include <linux/slab.h>
#define MODULE_NAME "DAVINCI-WDT: "
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. (1<=timeout<=3600, default="
- __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
+ __MODULE_STRING(WDT_TIMEOUT) ")");
MODULE_AUTHOR("Ray Lehtiniemi <rayl@mail.com>,"
"Alessandro Zummo <a.zummo@towertech.it>");
#include <linux/efi.h>
#include <linux/string.h>
#include <linux/bootmem.h>
-#include <linux/slab.h>
#include <asm/desc.h>
#include <asm/cacheflush.h>
static int hpwdt_change_timer(int new_margin)
{
/* Arbitrary, can't find the card's limits */
- if (new_margin < 30 || new_margin > 600) {
+ if (new_margin < 5 || new_margin > 600) {
printk(KERN_WARNING
"hpwdt: New value passed in is invalid: %d seconds.\n",
new_margin);
TCO_3420, /* 3420 */
TCO_3450, /* 3450 */
TCO_EP80579, /* EP80579 */
- TCO_CPTD, /* CPT Desktop */
- TCO_CPTM, /* CPT Mobile */
+ TCO_CPT1, /* Cougar Point */
+ TCO_CPT2, /* Cougar Point Desktop */
+ TCO_CPT3, /* Cougar Point Mobile */
+ TCO_CPT4, /* Cougar Point */
+ TCO_CPT5, /* Cougar Point */
+ TCO_CPT6, /* Cougar Point */
+ TCO_CPT7, /* Cougar Point */
+ TCO_CPT8, /* Cougar Point */
+ TCO_CPT9, /* Cougar Point */
+ TCO_CPT10, /* Cougar Point */
+ TCO_CPT11, /* Cougar Point */
+ TCO_CPT12, /* Cougar Point */
+ TCO_CPT13, /* Cougar Point */
+ TCO_CPT14, /* Cougar Point */
+ TCO_CPT15, /* Cougar Point */
+ TCO_CPT16, /* Cougar Point */
+ TCO_CPT17, /* Cougar Point */
+ TCO_CPT18, /* Cougar Point */
+ TCO_CPT19, /* Cougar Point */
+ TCO_CPT20, /* Cougar Point */
+ TCO_CPT21, /* Cougar Point */
+ TCO_CPT22, /* Cougar Point */
+ TCO_CPT23, /* Cougar Point */
+ TCO_CPT24, /* Cougar Point */
+ TCO_CPT25, /* Cougar Point */
+ TCO_CPT26, /* Cougar Point */
+ TCO_CPT27, /* Cougar Point */
+ TCO_CPT28, /* Cougar Point */
+ TCO_CPT29, /* Cougar Point */
+ TCO_CPT30, /* Cougar Point */
+ TCO_CPT31, /* Cougar Point */
};
static struct {
{"3420", 2},
{"3450", 2},
{"EP80579", 2},
- {"CPT Desktop", 2},
- {"CPT Mobile", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
+ {"Cougar Point", 2},
{NULL, 0}
};
{ ITCO_PCI_DEVICE(0x3b14, TCO_3420)},
{ ITCO_PCI_DEVICE(0x3b16, TCO_3450)},
{ ITCO_PCI_DEVICE(0x5031, TCO_EP80579)},
- { ITCO_PCI_DEVICE(0x1c42, TCO_CPTD)},
- { ITCO_PCI_DEVICE(0x1c43, TCO_CPTM)},
+ { ITCO_PCI_DEVICE(0x1c41, TCO_CPT1)},
+ { ITCO_PCI_DEVICE(0x1c42, TCO_CPT2)},
+ { ITCO_PCI_DEVICE(0x1c43, TCO_CPT3)},
+ { ITCO_PCI_DEVICE(0x1c44, TCO_CPT4)},
+ { ITCO_PCI_DEVICE(0x1c45, TCO_CPT5)},
+ { ITCO_PCI_DEVICE(0x1c46, TCO_CPT6)},
+ { ITCO_PCI_DEVICE(0x1c47, TCO_CPT7)},
+ { ITCO_PCI_DEVICE(0x1c48, TCO_CPT8)},
+ { ITCO_PCI_DEVICE(0x1c49, TCO_CPT9)},
+ { ITCO_PCI_DEVICE(0x1c4a, TCO_CPT10)},
+ { ITCO_PCI_DEVICE(0x1c4b, TCO_CPT11)},
+ { ITCO_PCI_DEVICE(0x1c4c, TCO_CPT12)},
+ { ITCO_PCI_DEVICE(0x1c4d, TCO_CPT13)},
+ { ITCO_PCI_DEVICE(0x1c4e, TCO_CPT14)},
+ { ITCO_PCI_DEVICE(0x1c4f, TCO_CPT15)},
+ { ITCO_PCI_DEVICE(0x1c50, TCO_CPT16)},
+ { ITCO_PCI_DEVICE(0x1c51, TCO_CPT17)},
+ { ITCO_PCI_DEVICE(0x1c52, TCO_CPT18)},
+ { ITCO_PCI_DEVICE(0x1c53, TCO_CPT19)},
+ { ITCO_PCI_DEVICE(0x1c54, TCO_CPT20)},
+ { ITCO_PCI_DEVICE(0x1c55, TCO_CPT21)},
+ { ITCO_PCI_DEVICE(0x1c56, TCO_CPT22)},
+ { ITCO_PCI_DEVICE(0x1c57, TCO_CPT23)},
+ { ITCO_PCI_DEVICE(0x1c58, TCO_CPT24)},
+ { ITCO_PCI_DEVICE(0x1c59, TCO_CPT25)},
+ { ITCO_PCI_DEVICE(0x1c5a, TCO_CPT26)},
+ { ITCO_PCI_DEVICE(0x1c5b, TCO_CPT27)},
+ { ITCO_PCI_DEVICE(0x1c5c, TCO_CPT28)},
+ { ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)},
+ { ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)},
+ { ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
#include <linux/fs.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/timer.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/device.h>
+#include <linux/slab.h>
#define DEFAULT_HEARTBEAT 60
#define MAX_HEARTBEAT 60
static void max63xx_wdt_disable(void)
{
+ u8 val;
+
spin_lock(&io_lock);
- __raw_writeb(3, wdt_base);
+ val = __raw_readb(wdt_base);
+ val &= ~MAX6369_WDSET;
+ val |= 3;
+ __raw_writeb(val, wdt_base);
spin_unlock(&io_lock);
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <asm/hardware/arm_twd.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/watchdog.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#include <plat/prcm.h>
struct timer_list timer; /* The timer that pings the watchdog */
} pikawdt_private;
-static const struct watchdog_info ident = {
+static struct watchdog_info ident = {
.identity = DRV_NAME,
.options = WDIOF_CARDRESET |
WDIOF_SETTIMEOUT |
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <mach/hardware.h>
#define MODULE_NAME "PNX4008-WDT: "
#include <linux/of_device.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
/* RIO uses the NatSemi Super I/O power management logical device
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/cpufreq.h>
+#include <linux/slab.h>
#include <mach/map.h>
void sbwdog_set(char __iomem *wdog, unsigned long t)
{
spin_lock(&sbwd_lock);
- __raw_writeb(0, wdog - 0x10);
- __raw_writeq(t & 0x7fffffUL, wdog);
+ __raw_writeb(0, wdog);
+ __raw_writeq(t & 0x7fffffUL, wdog - 0x10);
spin_unlock(&sbwd_lock);
}
static int nowayout = WATCHDOG_NOWAYOUT;
static unsigned int margin = 60; /* (secs) Default is 1 minute */
static unsigned long wdt_status;
-static DEFINE_SPINLOCK(wdt_lock);
+static DEFINE_MUTEX(wdt_lock);
#define WDT_IN_USE 0
#define WDT_OK_TO_CLOSE 1
static void wdt_send_data(unsigned char command, unsigned char data)
{
- outb(command, COMMAND_PORT);
- msleep(100);
outb(data, DATA_PORT);
msleep(200);
+ outb(command, COMMAND_PORT);
+ msleep(100);
}
static void wdt_enable(void)
{
- spin_lock(&wdt_lock);
+ mutex_lock(&wdt_lock);
wdt_send_data(IFACE_ON_COMMAND, 1);
wdt_send_data(REBOOT_COMMAND, margin);
- spin_unlock(&wdt_lock);
+ mutex_unlock(&wdt_lock);
}
static void wdt_disable(void)
{
- spin_lock(&wdt_lock);
+ mutex_lock(&wdt_lock);
wdt_send_data(IFACE_ON_COMMAND, 0);
wdt_send_data(REBOOT_COMMAND, 0);
- spin_unlock(&wdt_lock);
+ mutex_unlock(&wdt_lock);
}
static int fitpc2_wdt_open(struct inode *inode, struct file *file)
#include <linux/miscdevice.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <linux/watchdog.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/watchdog.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/sysdev.h>
+#include <linux/gfp.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/bootmem.h>
+#include <linux/slab.h>
#include <asm/ptrace.h>
#include <asm/irq.h>
#include <linux/poll.h>
#include <linux/irq.h>
#include <linux/init.h>
-#include <linux/gfp.h>
#include <linux/mutex.h>
#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/uaccess.h>
*/
#include <linux/kernel.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
#include <linux/stop_machine.h>
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kobject.h>
* IN THE SOFTWARE.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/vmalloc.h>
#include <asm/xen/hypervisor.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pgtable.h>
* Authors: Hollis Blanchard <hollisb@us.ibm.com>
*/
-#include <linux/gfp.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <xen/xencomm.h>
#include <xen/interface/xen.h>
#include <linux/init.h>
#include <linux/namei.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include "xenfs.h"
#include "../xenbus/xenbus_comms.h"
#include <linux/jiffies.h>
#include <linux/file.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/idr.h>
#include <net/9p/9p.h>
{
int i, n, l, clone, any, access;
u32 uid;
- struct p9_fid *fid;
+ struct p9_fid *fid, *old_fid = NULL;
struct dentry *d, *ds;
struct v9fs_session_info *v9ses;
char **wnames, *uname;
l = min(n - i, P9_MAXWELEM);
fid = p9_client_walk(fid, l, &wnames[i], clone);
if (IS_ERR(fid)) {
+ if (old_fid) {
+ /*
+ * If we fail, clunk fid which are mapping
+ * to path component and not the last component
+ * of the path.
+ */
+ p9_client_clunk(old_fid);
+ }
kfree(wnames);
return fid;
}
-
+ old_fid = fid;
i += l;
clone = 0;
}
#include <linux/sched.h>
#include <linux/parser.h>
#include <linux/idr.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
return ERR_PTR(-ENOMEM);
}
+ rc = bdi_setup_and_register(&v9ses->bdi, "9p", BDI_CAP_MAP_COPY);
+ if (rc) {
+ __putname(v9ses->aname);
+ __putname(v9ses->uname);
+ return ERR_PTR(rc);
+ }
+
spin_lock(&v9fs_sessionlist_lock);
list_add(&v9ses->slist, &v9fs_sessionlist);
spin_unlock(&v9fs_sessionlist_lock);
- v9ses->flags = V9FS_PROTO_2000U | V9FS_ACCESS_USER;
+ v9ses->flags = V9FS_ACCESS_USER;
strcpy(v9ses->uname, V9FS_DEFUSER);
strcpy(v9ses->aname, V9FS_DEFANAME);
v9ses->uid = ~0;
goto error;
}
- if (!p9_is_proto_dotu(v9ses->clnt))
- v9ses->flags &= ~V9FS_PROTO_2000U;
+ if (p9_is_proto_dotl(v9ses->clnt))
+ v9ses->flags |= V9FS_PROTO_2000L;
+ else if (p9_is_proto_dotu(v9ses->clnt))
+ v9ses->flags |= V9FS_PROTO_2000U;
v9ses->maxdata = v9ses->clnt->msize - P9_IOHDRSZ;
return fid;
error:
+ bdi_destroy(&v9ses->bdi);
return ERR_PTR(retval);
}
__putname(v9ses->uname);
__putname(v9ses->aname);
+ bdi_destroy(&v9ses->bdi);
+
spin_lock(&v9fs_sessionlist_lock);
list_del(&v9ses->slist);
spin_unlock(&v9fs_sessionlist_lock);
p9_client_disconnect(v9ses->clnt);
}
+/**
+ * v9fs_session_begin_cancel - Begin terminate of a session
+ * @v9ses: session to terminate
+ *
+ * After this call we don't allow any request other than clunk.
+ */
+
+void v9fs_session_begin_cancel(struct v9fs_session_info *v9ses)
+{
+ P9_DPRINTK(P9_DEBUG_ERROR, "begin cancel session %p\n", v9ses);
+ p9_client_begin_disconnect(v9ses->clnt);
+}
+
extern int v9fs_error_init(void);
static struct kobject *v9fs_kobj;
* Boston, MA 02111-1301 USA
*
*/
+#include <linux/backing-dev.h>
/**
* enum p9_session_flags - option flags for each 9P session
u32 uid; /* if ACCESS_SINGLE, the uid that has access */
struct p9_client *clnt; /* 9p client */
struct list_head slist; /* list of sessions registered with v9fs */
+ struct backing_dev_info bdi;
};
struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
char *);
void v9fs_session_close(struct v9fs_session_info *v9ses);
void v9fs_session_cancel(struct v9fs_session_info *v9ses);
+void v9fs_session_begin_cancel(struct v9fs_session_info *v9ses);
#define V9FS_MAGIC 0x01021997
#include <linux/namei.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <linux/sched.h>
#include <linux/inet.h>
#include <linux/idr.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
rdir = (struct p9_rdir *) fid->rdir;
err = mutex_lock_interruptible(&rdir->mutex);
+ if (err)
+ return err;
while (err == 0) {
if (rdir->tail == rdir->head) {
err = v9fs_file_readn(filp, rdir->buf, NULL,
#include <linux/namei.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
static int v9fs_remove(struct inode *dir, struct dentry *file, int rmdir)
{
+ int retval;
struct inode *file_inode;
struct v9fs_session_info *v9ses;
struct p9_fid *v9fid;
if (IS_ERR(v9fid))
return PTR_ERR(v9fid);
- return p9_client_remove(v9fid);
+ retval = p9_client_remove(v9fid);
+ if (!retval)
+ drop_nlink(file_inode);
+ return retval;
}
static int
P9_DPRINTK(P9_DEBUG_VFS, "dir: %p dentry: (%s) %p nameidata: %p\n",
dir, dentry->d_name.name, dentry, nameidata);
+ if (dentry->d_name.len > NAME_MAX)
+ return ERR_PTR(-ENAMETOOLONG);
+
sb = dir->i_sb;
v9ses = v9fs_inode2v9ses(dir);
dfid = v9fs_fid_lookup(dentry->d_parent);
#include <linux/mount.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
sb->s_blocksize = 1 << sb->s_blocksize_bits;
sb->s_magic = V9FS_MAGIC;
sb->s_op = &v9fs_super_ops;
+ sb->s_bdi = &v9ses->bdi;
sb->s_flags = flags | MS_ACTIVE | MS_SYNCHRONOUS | MS_DIRSYNC |
MS_NOATIME;
kill_anon_super(s);
+ v9fs_session_cancel(v9ses);
v9fs_session_close(v9ses);
kfree(v9ses);
s->s_fs_info = NULL;
struct v9fs_session_info *v9ses;
v9ses = sb->s_fs_info;
- v9fs_session_cancel(v9ses);
+ v9fs_session_begin_cancel(v9ses);
}
static const struct super_operations v9fs_super_ops = {
#include <linux/parser.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/statfs.h>
#include "adfs.h"
* block allocation, deallocation, calculation of free space.
*/
+#include <linux/slab.h>
#include "affs.h"
/* This is, of course, shamelessly stolen from fs/minix */
* (C) 1991 Linus Torvalds - minix filesystem
*/
#include <linux/sched.h>
+#include <linux/gfp.h>
#include "affs.h"
extern const struct inode_operations affs_symlink_inode_operations;
#include <linux/magic.h>
#include <linux/sched.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include "affs.h"
extern struct timezone sys_tz;
* 2 of the License, or (at your option) any later version.
*/
-#include <linux/slab.h>
#include <linux/sched.h>
#include "internal.h"
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/ip.h>
#include "internal.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/ctype.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/writeback.h>
+#include <linux/gfp.h>
#include "internal.h"
static int afs_readpage(struct file *file, struct page *page);
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/circ_buf.h>
#include "internal.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/fscache.h>
+#include <linux/backing-dev.h>
#include "afs.h"
#include "afs_vl.h"
unsigned short rjservers; /* number of servers discarded due to -ENOMEDIUM */
struct afs_server *servers[8]; /* servers on which volume resides (ordered) */
struct rw_semaphore server_sem; /* lock for accessing current server */
+ struct backing_dev_info bdi;
};
/*
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/mount.h>
#include <linux/namei.h>
+#include <linux/gfp.h>
#include "internal.h"
{
struct afs_super_info *super;
struct vfsmount *mnt;
- struct page *page = NULL;
+ struct page *page;
size_t size;
- char *buf, *devname = NULL, *options = NULL;
+ char *buf, *devname, *options;
int ret;
_enter("{%s}", mntpt->d_name.name);
ret = -EINVAL;
size = mntpt->d_inode->i_size;
if (size > PAGE_SIZE - 1)
- goto error;
+ goto error_no_devname;
ret = -ENOMEM;
devname = (char *) get_zeroed_page(GFP_KERNEL);
if (!devname)
- goto error;
+ goto error_no_devname;
options = (char *) get_zeroed_page(GFP_KERNEL);
if (!options)
- goto error;
+ goto error_no_options;
/* read the contents of the AFS special symlink */
page = read_mapping_page(mntpt->d_inode->i_mapping, 0, NULL);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
- goto error;
+ goto error_no_page;
}
ret = -EIO;
return mnt;
error:
- if (page)
- page_cache_release(page);
- if (devname)
- free_page((unsigned long) devname);
- if (options)
- free_page((unsigned long) options);
+ page_cache_release(page);
+error_no_page:
+ free_page((unsigned long) options);
+error_no_options:
+ free_page((unsigned long) devname);
+error_no_devname:
_leave(" = %d", ret);
return ERR_PTR(ret);
}
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <rxrpc/packet.h>
if (!permits)
goto out_unlock;
- memcpy(permits->permits, xpermits->permits,
- count * sizeof(struct afs_permit));
+ if (xpermits)
+ memcpy(permits->permits, xpermits->permits,
+ count * sizeof(struct afs_permit));
_debug("key %x access %x",
key_serial(key), vnode->status.caller_access);
sb->s_magic = AFS_FS_MAGIC;
sb->s_op = &afs_super_ops;
sb->s_fs_info = as;
+ sb->s_bdi = &as->volume->bdi;
/* allocate the root inode and dentry */
fid.vid = as->volume->vid;
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/sched.h>
#include "internal.h"
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include "internal.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include "internal.h"
volume->cell = params->cell;
volume->vid = vlocation->vldb.vid[params->type];
+ ret = bdi_setup_and_register(&volume->bdi, "afs", BDI_CAP_MAP_COPY);
+ if (ret)
+ goto error_bdi;
+
init_rwsem(&volume->server_sem);
/* look up all the applicable server records */
return ERR_PTR(ret);
error_discard:
+ bdi_destroy(&volume->bdi);
+error_bdi:
up_write(¶ms->cell->vl_sem);
for (loop = volume->nservers - 1; loop >= 0; loop--)
for (loop = volume->nservers - 1; loop >= 0; loop--)
afs_put_server(volume->servers[loop]);
+ bdi_destroy(&volume->bdi);
kfree(volume);
_leave(" [destroyed]");
#include <linux/file.h>
#include <linux/poll.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/mount.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <linux/param.h>
#include <linux/time.h>
#include <linux/smp_lock.h>
#include <linux/magic.h>
#include <linux/dcache.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include "autofs_i.h"
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <linux/param.h>
#include <linux/time.h>
#include "autofs_i.h"
}
/* Trigger mount for path component or follow link */
} else if (ino->flags & AUTOFS_INF_PENDING ||
- autofs4_need_mount(flags) ||
- current->link_count) {
+ autofs4_need_mount(flags)) {
DPRINTK("waiting for mount name=%.*s",
dentry->d_name.len, dentry->d_name.name);
spin_unlock(&dcache_lock);
spin_unlock(&sbi->fs_lock);
- status = try_to_fill_dentry(dentry, 0);
+ status = try_to_fill_dentry(dentry, nd->flags);
if (status)
goto out_error;
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/ptrace.h>
#include <linux/user.h>
-#include <linux/slab.h>
#include <linux/binfmts.h>
#include <linux/personality.h>
#include <linux/init.h>
#include <linux/coredump.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/uaccess.h>
struct file *file = cprm->file;
mm_segment_t fs;
int has_dumped = 0;
- unsigned long dump_start, dump_size;
+ void __user *dump_start;
+ int dump_size;
struct user dump;
#ifdef __alpha__
-# define START_DATA(u) (u.start_data)
+# define START_DATA(u) ((void __user *)u.start_data)
#else
-# define START_DATA(u) ((u.u_tsize << PAGE_SHIFT) + u.start_code)
+# define START_DATA(u) ((void __user *)((u.u_tsize << PAGE_SHIFT) + \
+ u.start_code))
#endif
-# define START_STACK(u) (u.start_stack)
+# define START_STACK(u) ((void __user *)u.start_stack)
fs = get_fs();
set_fs(KERNEL_DS);
/* make sure we actually have a data and stack area to dump */
set_fs(USER_DS);
- if (!access_ok(VERIFY_READ, (void __user *)START_DATA(dump), dump.u_dsize << PAGE_SHIFT))
+ if (!access_ok(VERIFY_READ, START_DATA(dump), dump.u_dsize << PAGE_SHIFT))
dump.u_dsize = 0;
- if (!access_ok(VERIFY_READ, (void __user *)START_STACK(dump), dump.u_ssize << PAGE_SHIFT))
+ if (!access_ok(VERIFY_READ, START_STACK(dump), dump.u_ssize << PAGE_SHIFT))
dump.u_ssize = 0;
set_fs(KERNEL_DS);
}
} else if (!mm->start_data) {
mm->start_data = seg->addr;
-#ifndef CONFIG_MMU
mm->end_data = seg->addr + phdr->p_memsz;
-#endif
}
-
-#ifdef CONFIG_MMU
- if (seg->addr + phdr->p_memsz > mm->end_data)
- mm->end_data = seg->addr + phdr->p_memsz;
-#endif
}
seg++;
struct vm_area_struct *vma;
size_t size = 0;
- for (vma = current->mm->mmap; vma; vma->vm_next)
+ for (vma = current->mm->mmap; vma; vma = vma->vm_next)
if (maydump(vma, mm_flags))
size += vma->vm_end - vma->vm_start;
return size;
#include <linux/module.h>
#include <linux/string.h>
#include <linux/stat.h>
-#include <linux/slab.h>
#include <linux/binfmts.h>
#include <linux/elf.h>
#include <linux/init.h>
if (!flat_reloc_valid(r, start_brk - start_data + text_len)) {
printk("BINFMT_FLAT: reloc outside program 0x%x (0 - 0x%x/0x%x)",
- (int) r,(int)(start_brk-start_code),(int)text_len);
+ (int) r,(int)(start_brk-start_data+text_len),(int)text_len);
goto failed;
}
#include <linux/module.h>
#include <linux/string.h>
#include <linux/stat.h>
-#include <linux/slab.h>
#include <linux/binfmts.h>
#include <linux/init.h>
#include <linux/file.h>
#include <linux/mempool.h>
#include <linux/bio.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
struct integrity_slab {
struct kmem_cache *slab;
.bi_rw = bio->bi_rw,
};
- if (q->merge_bvec_fn(q, &bvm, prev) < len) {
+ if (q->merge_bvec_fn(q, &bvm, prev) < prev->bv_len) {
prev->bv_len -= len;
return 0;
}
* merge_bvec_fn() returns number of bytes it can accept
* at this offset
*/
- if (q->merge_bvec_fn(q, &bvm, bvec) < len) {
+ if (q->merge_bvec_fn(q, &bvm, bvec) < bvec->bv_len) {
bvec->bv_page = NULL;
bvec->bv_len = 0;
bvec->bv_offset = 0;
* NULL first argument is nfsd_sync_dir() and that's not a directory.
*/
-static int block_fsync(struct file *filp, struct dentry *dentry, int datasync)
+int blkdev_fsync(struct file *filp, struct dentry *dentry, int datasync)
{
- struct block_device *bdev = I_BDEV(filp->f_mapping->host);
+ struct inode *bd_inode = filp->f_mapping->host;
+ struct block_device *bdev = I_BDEV(bd_inode);
int error;
- error = sync_blockdev(bdev);
- if (error)
- return error;
-
+ /*
+ * There is no need to serialise calls to blkdev_issue_flush with
+ * i_mutex and doing so causes performance issues with concurrent
+ * O_SYNC writers to a block device.
+ */
+ mutex_unlock(&bd_inode->i_mutex);
+
error = blkdev_issue_flush(bdev, NULL);
if (error == -EOPNOTSUPP)
error = 0;
+
+ mutex_lock(&bd_inode->i_mutex);
+
return error;
}
+EXPORT_SYMBOL(blkdev_fsync);
/*
* pseudo-fs
.aio_read = generic_file_aio_read,
.aio_write = blkdev_aio_write,
.mmap = generic_file_mmap,
- .fsync = block_fsync,
+ .fsync = blkdev_fsync,
.unlocked_ioctl = block_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = compat_blkdev_ioctl,
#include <linux/posix_acl_xattr.h>
#include <linux/posix_acl.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ctree.h"
#include "btrfs_inode.h"
*/
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/freezer.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/bit_spinlock.h>
-#include <linux/pagevec.h>
+#include <linux/slab.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
unsigned long nr_pages = 0;
struct extent_map *em;
struct address_space *mapping = inode->i_mapping;
- struct pagevec pvec;
struct extent_map_tree *em_tree;
struct extent_io_tree *tree;
u64 end;
end_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
- pagevec_init(&pvec, 0);
while (last_offset < compressed_end) {
page_index = last_offset >> PAGE_CACHE_SHIFT;
goto next;
}
- page = alloc_page(mapping_gfp_mask(mapping) & ~__GFP_FS);
+ page = __page_cache_alloc(mapping_gfp_mask(mapping) &
+ ~__GFP_FS);
if (!page)
break;
- page->index = page_index;
- /*
- * what we want to do here is call add_to_page_cache_lru,
- * but that isn't exported, so we reproduce it here
- */
- if (add_to_page_cache(page, mapping,
- page->index, GFP_NOFS)) {
+ if (add_to_page_cache_lru(page, mapping, page_index,
+ GFP_NOFS)) {
page_cache_release(page);
goto next;
}
- /* open coding of lru_cache_add, also not exported */
- page_cache_get(page);
- if (!pagevec_add(&pvec, page))
- __pagevec_lru_add_file(&pvec);
-
end = last_offset + PAGE_CACHE_SIZE - 1;
/*
* at this point, we have a locked page in the page cache
next:
last_offset += PAGE_CACHE_SIZE;
}
- if (pagevec_count(&pvec))
- __pagevec_lru_add_file(&pvec);
return 0;
}
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
if (ret > 0 || item_size != btrfs_item_size_nr(leaf, path->slots[0]))
goto err;
+ /* the leaf has changed, it now has room. return now */
+ if (btrfs_leaf_free_space(root, path->nodes[0]) >= ins_len)
+ goto err;
+
if (key.type == BTRFS_EXTENT_DATA_KEY) {
fi = btrfs_item_ptr(leaf, path->slots[0],
struct btrfs_file_extent_item);
#include <linux/completion.h>
#include <linux/backing-dev.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <asm/kmap_types.h>
#include "extent_io.h"
#include "extent_map.h"
u64 last_trans_log_full_commit;
u64 open_ioctl_trans;
unsigned long mount_opt;
- u64 max_extent;
u64 max_inline;
u64 alloc_start;
struct btrfs_transaction *running_transaction;
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/sort.h>
#include "ctree.h"
#include "delayed-ref.h"
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/crc32c.h>
+#include <linux/slab.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
static void end_workqueue_fn(struct btrfs_work *work);
static void free_fs_root(struct btrfs_root *root);
-static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
-
/*
* end_io_wq structs are used to do processing in task context when an IO is
* complete. This is used during reads to verify checksums, and it is used
{
int err;
- bdi->name = "btrfs";
bdi->capabilities = BDI_CAP_MAP_COPY;
- err = bdi_init(bdi);
+ err = bdi_setup_and_register(bdi, "btrfs", BDI_CAP_MAP_COPY);
if (err)
return err;
- err = bdi_register(bdi, NULL, "btrfs-%d",
- atomic_inc_return(&btrfs_bdi_num));
- if (err) {
- bdi_destroy(bdi);
- return err;
- }
-
bdi->ra_pages = default_backing_dev_info.ra_pages;
bdi->unplug_io_fn = btrfs_unplug_io_fn;
bdi->unplug_io_data = info;
atomic_set(&fs_info->async_submit_draining, 0);
atomic_set(&fs_info->nr_async_bios, 0);
fs_info->sb = sb;
- fs_info->max_extent = (u64)-1;
fs_info->max_inline = 8192 * 1024;
fs_info->metadata_ratio = 0;
csum_root->track_dirty = 1;
- btrfs_read_block_groups(extent_root);
+ ret = btrfs_read_block_groups(extent_root);
+ if (ret) {
+ printk(KERN_ERR "Failed to read block groups: %d\n", ret);
+ goto fail_block_groups;
+ }
fs_info->generation = generation;
fs_info->last_trans_committed = generation;
fs_info->cleaner_kthread = kthread_run(cleaner_kthread, tree_root,
"btrfs-cleaner");
if (IS_ERR(fs_info->cleaner_kthread))
- goto fail_csum_root;
+ goto fail_block_groups;
fs_info->transaction_kthread = kthread_run(transaction_kthread,
tree_root,
filemap_write_and_wait(fs_info->btree_inode->i_mapping);
invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
-fail_csum_root:
+fail_block_groups:
+ btrfs_free_block_groups(fs_info);
free_extent_buffer(csum_root->node);
free_extent_buffer(csum_root->commit_root);
fail_dev_root:
#include <linux/sort.h>
#include <linux/rcupdate.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include "compat.h"
#include "hash.h"
#include "ctree.h"
INIT_LIST_HEAD(&found->block_groups);
init_rwsem(&found->groups_sem);
+ init_waitqueue_head(&found->flush_wait);
+ init_waitqueue_head(&found->allocate_wait);
spin_lock_init(&found->lock);
found->flags = flags;
found->total_bytes = total_bytes;
}
spin_unlock(&BTRFS_I(inode)->accounting_lock);
- BTRFS_I(inode)->reserved_extents--;
+ BTRFS_I(inode)->reserved_extents -= num_items;
BUG_ON(BTRFS_I(inode)->reserved_extents < 0);
if (meta_sinfo->bytes_delalloc < num_bytes) {
spin_lock(&info->lock);
- if (!info->flushing) {
+ if (!info->flushing)
info->flushing = 1;
- init_waitqueue_head(&info->flush_wait);
- } else {
+ else
wait = true;
- }
spin_unlock(&info->lock);
if (!info->allocating_chunk) {
info->force_alloc = 1;
info->allocating_chunk = 1;
- init_waitqueue_head(&info->allocate_wait);
} else {
wait = true;
}
return -ENOSPC;
}
- BTRFS_I(inode)->reserved_extents++;
+ BTRFS_I(inode)->reserved_extents += num_items;
check_force_delalloc(meta_sinfo);
spin_unlock(&meta_sinfo->lock);
u64 bytes)
{
struct btrfs_space_info *data_sinfo;
- int ret = 0, committed = 0;
+ u64 used;
+ int ret = 0, committed = 0, flushed = 0;
/* make sure bytes are sectorsize aligned */
bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
again:
/* make sure we have enough space to handle the data first */
spin_lock(&data_sinfo->lock);
- if (data_sinfo->total_bytes - data_sinfo->bytes_used -
- data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
- data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
- data_sinfo->bytes_may_use - data_sinfo->bytes_super < bytes) {
+ used = data_sinfo->bytes_used + data_sinfo->bytes_delalloc +
+ data_sinfo->bytes_reserved + data_sinfo->bytes_pinned +
+ data_sinfo->bytes_readonly + data_sinfo->bytes_may_use +
+ data_sinfo->bytes_super;
+
+ if (used + bytes > data_sinfo->total_bytes) {
struct btrfs_trans_handle *trans;
+ if (!flushed) {
+ spin_unlock(&data_sinfo->lock);
+ flush_delalloc(root, data_sinfo);
+ flushed = 1;
+ goto again;
+ }
+
/*
* if we don't have enough free bytes in this space then we need
* to alloc a new chunk.
ins->offset = 0;
space_info = __find_space_info(root->fs_info, data);
+ if (!space_info) {
+ printk(KERN_ERR "No space info for %d\n", data);
+ return -ENOSPC;
+ }
if (orig_root->ref_cows || empty_size)
allowed_chunk_alloc = 1;
next = btrfs_find_tree_block(root, bytenr, blocksize);
if (!next) {
next = btrfs_find_create_tree_block(root, bytenr, blocksize);
+ if (!next)
+ return -ENOMEM;
reada = 1;
}
btrfs_tree_lock(next);
if (ret > 0) {
path->slots[level]++;
continue;
- }
+ } else if (ret < 0)
+ return ret;
level = wc->level;
}
return 0;
}
path->slots[0]++;
}
- ret = -ENOENT;
out:
return ret;
}
#include <linux/slab.h>
#include <linux/bio.h>
#include <linux/mm.h>
-#include <linux/gfp.h>
#include <linux/pagemap.h>
#include <linux/page-flags.h>
#include <linux/module.h>
{
struct bio *bio = NULL;
unsigned page_idx;
- struct pagevec pvec;
unsigned long bio_flags = 0;
- pagevec_init(&pvec, 0);
for (page_idx = 0; page_idx < nr_pages; page_idx++) {
struct page *page = list_entry(pages->prev, struct page, lru);
prefetchw(&page->flags);
list_del(&page->lru);
- /*
- * what we want to do here is call add_to_page_cache_lru,
- * but that isn't exported, so we reproduce it here
- */
- if (!add_to_page_cache(page, mapping,
+ if (!add_to_page_cache_lru(page, mapping,
page->index, GFP_KERNEL)) {
-
- /* open coding of lru_cache_add, also not exported */
- page_cache_get(page);
- if (!pagevec_add(&pvec, page))
- __pagevec_lru_add_file(&pvec);
__extent_read_full_page(tree, page, get_extent,
&bio, 0, &bio_flags);
}
page_cache_release(page);
}
- if (pagevec_count(&pvec))
- __pagevec_lru_add_file(&pvec);
BUG_ON(!list_empty(pages));
if (bio)
submit_one_bio(READ, bio, 0, bio_flags);
#include <linux/err.h>
-#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
*/
#include <linux/bio.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
#include "ctree.h"
#include <linux/writeback.h>
#include <linux/statfs.h>
#include <linux/compat.h>
+#include <linux/slab.h>
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
#include <linux/pagemap.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/math64.h>
#include "ctree.h"
#include "free-space-cache.h"
#include <linux/xattr.h>
#include <linux/posix_acl.h>
#include <linux/falloc.h>
+#include <linux/slab.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
while (disk_num_bytes > 0) {
unsigned long op;
- cur_alloc_size = min(disk_num_bytes, root->fs_info->max_extent);
+ cur_alloc_size = disk_num_bytes;
ret = btrfs_reserve_extent(trans, root, cur_alloc_size,
root->sectorsize, 0, alloc_hint,
(u64)-1, &ins, 1);
static int btrfs_split_extent_hook(struct inode *inode,
struct extent_state *orig, u64 split)
{
- struct btrfs_root *root = BTRFS_I(inode)->root;
- u64 size;
-
if (!(orig->state & EXTENT_DELALLOC))
return 0;
- size = orig->end - orig->start + 1;
- if (size > root->fs_info->max_extent) {
- u64 num_extents;
- u64 new_size;
-
- new_size = orig->end - split + 1;
- num_extents = div64_u64(size + root->fs_info->max_extent - 1,
- root->fs_info->max_extent);
-
- /*
- * if we break a large extent up then leave oustanding_extents
- * be, since we've already accounted for the large extent.
- */
- if (div64_u64(new_size + root->fs_info->max_extent - 1,
- root->fs_info->max_extent) < num_extents)
- return 0;
- }
-
spin_lock(&BTRFS_I(inode)->accounting_lock);
BTRFS_I(inode)->outstanding_extents++;
spin_unlock(&BTRFS_I(inode)->accounting_lock);
struct extent_state *new,
struct extent_state *other)
{
- struct btrfs_root *root = BTRFS_I(inode)->root;
- u64 new_size, old_size;
- u64 num_extents;
-
/* not delalloc, ignore it */
if (!(other->state & EXTENT_DELALLOC))
return 0;
- old_size = other->end - other->start + 1;
- if (new->start < other->start)
- new_size = other->end - new->start + 1;
- else
- new_size = new->end - other->start + 1;
-
- /* we're not bigger than the max, unreserve the space and go */
- if (new_size <= root->fs_info->max_extent) {
- spin_lock(&BTRFS_I(inode)->accounting_lock);
- BTRFS_I(inode)->outstanding_extents--;
- spin_unlock(&BTRFS_I(inode)->accounting_lock);
- return 0;
- }
-
- /*
- * If we grew by another max_extent, just return, we want to keep that
- * reserved amount.
- */
- num_extents = div64_u64(old_size + root->fs_info->max_extent - 1,
- root->fs_info->max_extent);
- if (div64_u64(new_size + root->fs_info->max_extent - 1,
- root->fs_info->max_extent) > num_extents)
- return 0;
-
spin_lock(&BTRFS_I(inode)->accounting_lock);
BTRFS_I(inode)->outstanding_extents--;
spin_unlock(&BTRFS_I(inode)->accounting_lock);
BTRFS_I(inode)->outstanding_extents++;
spin_unlock(&BTRFS_I(inode)->accounting_lock);
btrfs_delalloc_reserve_space(root, inode, end - start + 1);
+
spin_lock(&root->fs_info->delalloc_lock);
BTRFS_I(inode)->delalloc_bytes += end - start + 1;
root->fs_info->delalloc_bytes += end - start + 1;
if (bits & EXTENT_DO_ACCOUNTING) {
spin_lock(&BTRFS_I(inode)->accounting_lock);
+ WARN_ON(!BTRFS_I(inode)->outstanding_extents);
BTRFS_I(inode)->outstanding_extents--;
spin_unlock(&BTRFS_I(inode)->accounting_lock);
btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
void btrfs_drop_inode(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
-
if (inode->i_nlink > 0 && btrfs_root_refs(&root->root_item) == 0)
generic_delete_inode(inode);
else
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
- u64 alloc_size;
u64 cur_offset = start;
u64 num_bytes = end - start;
int ret = 0;
u64 i_size;
while (num_bytes > 0) {
- alloc_size = min(num_bytes, root->fs_info->max_extent);
-
trans = btrfs_start_transaction(root, 1);
- ret = btrfs_reserve_extent(trans, root, alloc_size,
+ ret = btrfs_reserve_extent(trans, root, num_bytes,
root->sectorsize, 0, alloc_hint,
(u64)-1, &ins, 1);
if (ret) {
#include <linux/security.h>
#include <linux/xattr.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
#include "print-tree.h"
#include "volumes.h"
#include "locking.h"
-#include "ctree.h"
/* Mask out flags that are inappropriate for the given type of inode. */
static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags)
em = btrfs_get_extent(inode, NULL, 0, start, len, 0);
unlock_extent(io_tree, start, start + len - 1, GFP_NOFS);
- if (!em)
+ if (IS_ERR(em))
return 0;
}
return -EPERM;
args = kmalloc(sizeof(*args), GFP_KERNEL);
+ if (!args)
+ return -ENOMEM;
+
if (copy_from_user(args, argp, sizeof(*args))) {
kfree(args);
return -EFAULT;
sizeof(*range))) {
ret = -EFAULT;
kfree(range);
+ goto out;
}
/* compression requires us to start the IO */
if ((range->flags & BTRFS_DEFRAG_RANGE_COMPRESS)) {
* Boston, MA 021110-1307, USA.
*/
#include <linux/sched.h>
-#include <linux/gfp.h>
#include <linux/pagemap.h>
#include <linux/spinlock.h>
#include <linux/page-flags.h>
* Boston, MA 021110-1307, USA.
*/
-#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/writeback.h>
struct btrfs_ordered_extent *entry)
{
struct btrfs_ordered_inode_tree *tree;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
struct rb_node *node;
tree = &BTRFS_I(inode)->ordered_tree;
set_bit(BTRFS_ORDERED_COMPLETE, &entry->flags);
spin_lock(&BTRFS_I(inode)->accounting_lock);
+ WARN_ON(!BTRFS_I(inode)->outstanding_extents);
BTRFS_I(inode)->outstanding_extents--;
spin_unlock(&BTRFS_I(inode)->accounting_lock);
btrfs_unreserve_metadata_for_delalloc(BTRFS_I(inode)->root,
inode, 1);
- spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
+ spin_lock(&root->fs_info->ordered_extent_lock);
list_del_init(&entry->root_extent_list);
/*
!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
list_del_init(&BTRFS_I(inode)->ordered_operations);
}
- spin_unlock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
+ spin_unlock(&root->fs_info->ordered_extent_lock);
return 0;
}
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/sort.h>
#include "ctree.h"
#include "ref-cache.h"
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/rbtree.h>
+#include <linux/slab.h>
#include "ctree.h"
#include "disk-io.h"
#include "transaction.h"
#include <linux/namei.h>
#include <linux/miscdevice.h>
#include <linux/magic.h>
+#include <linux/slab.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
enum {
Opt_degraded, Opt_subvol, Opt_subvolid, Opt_device, Opt_nodatasum,
- Opt_nodatacow, Opt_max_extent, Opt_max_inline, Opt_alloc_start,
- Opt_nobarrier, Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool,
- Opt_noacl, Opt_compress, Opt_compress_force, Opt_notreelog, Opt_ratio,
- Opt_flushoncommit,
+ Opt_nodatacow, Opt_max_inline, Opt_alloc_start, Opt_nobarrier, Opt_ssd,
+ Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl, Opt_compress,
+ Opt_compress_force, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
Opt_discard, Opt_err,
};
{Opt_nodatasum, "nodatasum"},
{Opt_nodatacow, "nodatacow"},
{Opt_nobarrier, "nobarrier"},
- {Opt_max_extent, "max_extent=%s"},
{Opt_max_inline, "max_inline=%s"},
{Opt_alloc_start, "alloc_start=%s"},
{Opt_thread_pool, "thread_pool=%d"},
info->thread_pool_size);
}
break;
- case Opt_max_extent:
- num = match_strdup(&args[0]);
- if (num) {
- info->max_extent = memparse(num, NULL);
- kfree(num);
-
- info->max_extent = max_t(u64,
- info->max_extent, root->sectorsize);
- printk(KERN_INFO "btrfs: max_extent at %llu\n",
- (unsigned long long)info->max_extent);
- }
- break;
case Opt_max_inline:
num = match_strdup(&args[0]);
if (num) {
seq_puts(seq, ",nodatacow");
if (btrfs_test_opt(root, NOBARRIER))
seq_puts(seq, ",nobarrier");
- if (info->max_extent != (u64)-1)
- seq_printf(seq, ",max_extent=%llu",
- (unsigned long long)info->max_extent);
if (info->max_inline != 8192 * 1024)
seq_printf(seq, ",max_inline=%llu",
(unsigned long long)info->max_inline);
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
while (1) {
prepare_to_wait(&root->fs_info->transaction_wait, &wait,
TASK_UNINTERRUPTIBLE);
- if (cur_trans->blocked) {
- mutex_unlock(&root->fs_info->trans_mutex);
- schedule();
- mutex_lock(&root->fs_info->trans_mutex);
- finish_wait(&root->fs_info->transaction_wait,
- &wait);
- } else {
- finish_wait(&root->fs_info->transaction_wait,
- &wait);
+ if (!cur_trans->blocked)
break;
- }
+ mutex_unlock(&root->fs_info->trans_mutex);
+ schedule();
+ mutex_lock(&root->fs_info->trans_mutex);
}
+ finish_wait(&root->fs_info->transaction_wait, &wait);
put_transaction(cur_trans);
}
}
struct btrfs_root_item *new_root_item;
struct btrfs_root *tree_root = fs_info->tree_root;
struct btrfs_root *root = pending->root;
+ struct btrfs_root *parent_root;
+ struct inode *parent_inode;
struct extent_buffer *tmp;
struct extent_buffer *old;
int ret;
u64 objectid;
+ int namelen;
+ u64 index = 0;
+
+ parent_inode = pending->dentry->d_parent->d_inode;
+ parent_root = BTRFS_I(parent_inode)->root;
new_root_item = kmalloc(sizeof(*new_root_item), GFP_NOFS);
if (!new_root_item) {
if (ret)
goto fail;
- record_root_in_trans(trans, root);
- btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
- memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
-
key.objectid = objectid;
/* record when the snapshot was created in key.offset */
key.offset = trans->transid;
btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
- old = btrfs_lock_root_node(root);
- btrfs_cow_block(trans, root, old, NULL, 0, &old);
- btrfs_set_lock_blocking(old);
-
- btrfs_copy_root(trans, root, old, &tmp, objectid);
- btrfs_tree_unlock(old);
- free_extent_buffer(old);
-
- btrfs_set_root_node(new_root_item, tmp);
- ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
- new_root_item);
- btrfs_tree_unlock(tmp);
- free_extent_buffer(tmp);
- if (ret)
- goto fail;
-
- key.offset = (u64)-1;
memcpy(&pending->root_key, &key, sizeof(key));
-fail:
- kfree(new_root_item);
- return ret;
-}
-
-static noinline int finish_pending_snapshot(struct btrfs_fs_info *fs_info,
- struct btrfs_pending_snapshot *pending)
-{
- int ret;
- int namelen;
- u64 index = 0;
- struct btrfs_trans_handle *trans;
- struct inode *parent_inode;
- struct btrfs_root *parent_root;
-
- parent_inode = pending->dentry->d_parent->d_inode;
- parent_root = BTRFS_I(parent_inode)->root;
- trans = btrfs_join_transaction(parent_root, 1);
+ pending->root_key.offset = (u64)-1;
+ record_root_in_trans(trans, parent_root);
/*
* insert the directory item
*/
namelen = strlen(pending->name);
ret = btrfs_set_inode_index(parent_inode, &index);
+ BUG_ON(ret);
ret = btrfs_insert_dir_item(trans, parent_root,
pending->name, namelen,
parent_inode->i_ino,
&pending->root_key, BTRFS_FT_DIR, index);
-
- if (ret)
- goto fail;
+ BUG_ON(ret);
btrfs_i_size_write(parent_inode, parent_inode->i_size + namelen * 2);
ret = btrfs_update_inode(trans, parent_root, parent_inode);
BUG_ON(ret);
+ record_root_in_trans(trans, root);
+ btrfs_set_root_last_snapshot(&root->root_item, trans->transid);
+ memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
+
+ old = btrfs_lock_root_node(root);
+ btrfs_cow_block(trans, root, old, NULL, 0, &old);
+ btrfs_set_lock_blocking(old);
+
+ btrfs_copy_root(trans, root, old, &tmp, objectid);
+ btrfs_tree_unlock(old);
+ free_extent_buffer(old);
+
+ btrfs_set_root_node(new_root_item, tmp);
+ ret = btrfs_insert_root(trans, root->fs_info->tree_root, &key,
+ new_root_item);
+ BUG_ON(ret);
+ btrfs_tree_unlock(tmp);
+ free_extent_buffer(tmp);
+
ret = btrfs_add_root_ref(trans, parent_root->fs_info->tree_root,
pending->root_key.objectid,
parent_root->root_key.objectid,
parent_inode->i_ino, index, pending->name,
namelen);
-
BUG_ON(ret);
fail:
- btrfs_end_transaction(trans, fs_info->fs_root);
+ kfree(new_root_item);
return ret;
}
return 0;
}
-static noinline int finish_pending_snapshots(struct btrfs_trans_handle *trans,
- struct btrfs_fs_info *fs_info)
-{
- struct btrfs_pending_snapshot *pending;
- struct list_head *head = &trans->transaction->pending_snapshots;
- int ret;
-
- while (!list_empty(head)) {
- pending = list_entry(head->next,
- struct btrfs_pending_snapshot, list);
- ret = finish_pending_snapshot(fs_info, pending);
- BUG_ON(ret);
- list_del(&pending->list);
- kfree(pending->name);
- kfree(pending);
- }
- return 0;
-}
-
static void update_super_roots(struct btrfs_root *root)
{
struct btrfs_root_item *root_item;
btrfs_finish_extent_commit(trans, root);
- /* do the directory inserts of any pending snapshot creations */
- finish_pending_snapshots(trans, root->fs_info);
-
mutex_lock(&root->fs_info->trans_mutex);
cur_trans->commit_done = 1;
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include "ctree.h"
#include "transaction.h"
#include "disk-io.h"
*/
#include <linux/sched.h>
#include <linux/bio.h>
+#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/random.h>
min_stripes = 2;
}
if (type & (BTRFS_BLOCK_GROUP_RAID1)) {
- num_stripes = min_t(u64, 2, fs_devices->rw_devices);
- if (num_stripes < 2)
+ if (fs_devices->rw_devices < 2)
return -ENOSPC;
+ num_stripes = 2;
min_stripes = 2;
}
if (type & (BTRFS_BLOCK_GROUP_RAID10)) {
do_div(calc_size, stripe_len);
calc_size *= stripe_len;
}
+
/* we don't want tiny stripes */
- calc_size = max_t(u64, min_stripe_size, calc_size);
+ if (!looped)
+ calc_size = max_t(u64, min_stripe_size, calc_size);
+
+ /*
+ * we're about to do_div by the stripe_len so lets make sure
+ * we end up with something bigger than a stripe
+ */
+ calc_size = max_t(u64, calc_size, stripe_len * 4);
do_div(calc_size, stripe_len);
calc_size *= stripe_len;
key.type = 0;
again:
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0)
+ goto error;
while (1) {
leaf = path->nodes[0];
slot = path->slots[0];
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/buffer_head.h>
#include "internal.h"
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/security.h>
+#include <linux/slab.h>
#include "internal.h"
#define CACHEFILES_KEYBUF_SIZE 512
*/
#include <linux/mount.h>
+#include <linux/slab.h>
#include <linux/file.h>
#include "internal.h"
#include <linux/fsnotify.h>
#include <linux/quotaops.h>
#include <linux/xattr.h>
+#include <linux/slab.h>
#include "internal.h"
static const char cachefiles_xattr_cache[] =
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/writeback.h> /* generic_writepages */
+#include <linux/slab.h>
#include <linux/pagevec.h>
#include <linux/task_io_accounting_ops.h>
/*
* Get ref for the oldest snapc for an inode with dirty data... that is, the
* only snap context we are allowed to write back.
- *
- * Caller holds i_lock.
*/
-static struct ceph_snap_context *__get_oldest_context(struct inode *inode,
- u64 *snap_size)
+static struct ceph_snap_context *get_oldest_context(struct inode *inode,
+ u64 *snap_size)
{
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_snap_context *snapc = NULL;
struct ceph_cap_snap *capsnap = NULL;
+ spin_lock(&inode->i_lock);
list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
dout(" cap_snap %p snapc %p has %d dirty pages\n", capsnap,
capsnap->context, capsnap->dirty_pages);
break;
}
}
- if (!snapc && ci->i_snap_realm) {
- snapc = ceph_get_snap_context(ci->i_snap_realm->cached_context);
+ if (!snapc && ci->i_head_snapc) {
+ snapc = ceph_get_snap_context(ci->i_head_snapc);
dout(" head snapc %p has %d dirty pages\n",
snapc, ci->i_wrbuffer_ref_head);
}
- return snapc;
-}
-
-static struct ceph_snap_context *get_oldest_context(struct inode *inode,
- u64 *snap_size)
-{
- struct ceph_snap_context *snapc = NULL;
-
- spin_lock(&inode->i_lock);
- snapc = __get_oldest_context(inode, snap_size);
spin_unlock(&inode->i_lock);
return snapc;
}
int len = PAGE_CACHE_SIZE;
loff_t i_size;
int err = 0;
- struct ceph_snap_context *snapc;
+ struct ceph_snap_context *snapc, *oldest;
u64 snap_size = 0;
long writeback_stat;
dout("writepage %p page %p not dirty?\n", inode, page);
goto out;
}
- if (snapc != get_oldest_context(inode, &snap_size)) {
+ oldest = get_oldest_context(inode, &snap_size);
+ if (snapc->seq > oldest->seq) {
dout("writepage %p page %p snapc %p not writeable - noop\n",
inode, page, (void *)page->private);
/* we should only noop if called by kswapd */
WARN_ON((current->flags & PF_MEMALLOC) == 0);
+ ceph_put_snap_context(oldest);
goto out;
}
+ ceph_put_snap_context(oldest);
/* is this a partial page at end of file? */
if (snap_size)
ClearPagePrivate(page);
end_page_writeback(page);
ceph_put_wrbuffer_cap_refs(ci, 1, snapc);
- ceph_put_snap_context(snapc);
+ ceph_put_snap_context(snapc); /* page's reference */
out:
return err;
}
u64 bytes = 0;
struct ceph_client *client = ceph_inode_to_client(inode);
long writeback_stat;
- unsigned issued = __ceph_caps_issued(ci, NULL);
+ unsigned issued = ceph_caps_issued(ci);
/* parse reply */
replyhead = msg->front.iov_base;
dout("inode %p skipping page %p\n", inode, page);
wbc->pages_skipped++;
}
+ ceph_put_snap_context((void *)page->private);
page->private = 0;
ClearPagePrivate(page);
- ceph_put_snap_context(snapc);
dout("unlocking %d %p\n", i, page);
end_page_writeback(page);
int range_whole = 0;
int should_loop = 1;
pgoff_t max_pages = 0, max_pages_ever = 0;
- struct ceph_snap_context *snapc = NULL, *last_snapc = NULL;
+ struct ceph_snap_context *snapc = NULL, *last_snapc = NULL, *pgsnapc;
struct pagevec pvec;
int done = 0;
int rc = 0;
}
/* only if matching snap context */
- if (snapc != (void *)page->private) {
- dout("page snapc %p != oldest %p\n",
- (void *)page->private, snapc);
+ pgsnapc = (void *)page->private;
+ if (pgsnapc->seq > snapc->seq) {
+ dout("page snapc %p %lld > oldest %p %lld\n",
+ pgsnapc, pgsnapc->seq, snapc, snapc->seq);
unlock_page(page);
if (!locked_pages)
continue; /* keep looking for snap */
struct ceph_snap_context *snapc)
{
struct ceph_snap_context *oldest = get_oldest_context(inode, NULL);
- return !oldest || snapc->seq <= oldest->seq;
+ int ret = !oldest || snapc->seq <= oldest->seq;
+
+ ceph_put_snap_context(oldest);
+ return ret;
}
/*
* We are only allowed to write into/dirty the page if the page is
* clean, or already dirty within the same snap context.
+ *
+ * called with page locked.
+ * return success with page locked,
+ * or any failure (incl -EAGAIN) with page unlocked.
*/
static int ceph_update_writeable_page(struct file *file,
loff_t pos, unsigned len,
int pos_in_page = pos & ~PAGE_CACHE_MASK;
int end_in_page = pos_in_page + len;
loff_t i_size;
- struct ceph_snap_context *snapc;
int r;
+ struct ceph_snap_context *snapc, *oldest;
retry_locked:
/* writepages currently holds page lock, but if we change that later, */
BUG_ON(!ci->i_snap_realm);
down_read(&mdsc->snap_rwsem);
BUG_ON(!ci->i_snap_realm->cached_context);
- if (page->private &&
- (void *)page->private != ci->i_snap_realm->cached_context) {
+ snapc = (void *)page->private;
+ if (snapc && snapc != ci->i_head_snapc) {
/*
* this page is already dirty in another (older) snap
* context! is it writeable now?
*/
- snapc = get_oldest_context(inode, NULL);
+ oldest = get_oldest_context(inode, NULL);
up_read(&mdsc->snap_rwsem);
- if (snapc != (void *)page->private) {
+ if (snapc->seq > oldest->seq) {
+ ceph_put_snap_context(oldest);
dout(" page %p snapc %p not current or oldest\n",
- page, (void *)page->private);
+ page, snapc);
/*
* queue for writeback, and wait for snapc to
* be writeable or written
*/
- snapc = ceph_get_snap_context((void *)page->private);
+ snapc = ceph_get_snap_context(snapc);
unlock_page(page);
ceph_queue_writeback(inode);
- wait_event_interruptible(ci->i_cap_wq,
+ r = wait_event_interruptible(ci->i_cap_wq,
context_is_writeable_or_written(inode, snapc));
ceph_put_snap_context(snapc);
+ if (r == -ERESTARTSYS)
+ return r;
return -EAGAIN;
}
+ ceph_put_snap_context(oldest);
/* yay, writeable, do it now (without dropping page lock) */
dout(" page %p snapc %p not current, but oldest\n",
int r;
do {
- /* get a page*/
+ /* get a page */
page = grab_cache_page_write_begin(mapping, index, 0);
if (!page)
return -ENOMEM;
#include "ceph_debug.h"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "types.h"
#include "auth_none.h"
#include <linux/err.h>
#include <linux/module.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include "auth_none.h"
#include "auth.h"
#ifndef _FS_CEPH_AUTH_NONE_H
#define _FS_CEPH_AUTH_NONE_H
+#include <linux/slab.h>
+
#include "auth.h"
/*
#include <linux/err.h>
#include <linux/module.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include "auth_x.h"
#include "auth_x_protocol.h"
#include "auth.h"
#include "decode.h"
-struct kmem_cache *ceph_x_ticketbuf_cachep;
-
#define TEMP_TICKET_BUF_LEN 256
static void ceph_x_validate_tickets(struct ceph_auth_client *ac, int *pneed);
return (ac->want_keys & xi->have_keys) == ac->want_keys;
}
+static int ceph_x_encrypt_buflen(int ilen)
+{
+ return sizeof(struct ceph_x_encrypt_header) + ilen + 16 +
+ sizeof(u32);
+}
+
static int ceph_x_encrypt(struct ceph_crypto_key *secret,
void *ibuf, int ilen, void *obuf, size_t olen)
{
char *ticket_buf;
u8 struct_v;
- dbuf = kmem_cache_alloc(ceph_x_ticketbuf_cachep, GFP_NOFS | GFP_ATOMIC);
+ dbuf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
if (!dbuf)
return -ENOMEM;
ret = -ENOMEM;
- ticket_buf = kmem_cache_alloc(ceph_x_ticketbuf_cachep,
- GFP_NOFS | GFP_ATOMIC);
+ ticket_buf = kmalloc(TEMP_TICKET_BUF_LEN, GFP_NOFS);
if (!ticket_buf)
goto out_dbuf;
struct timespec validity;
struct ceph_crypto_key old_key;
void *tp, *tpend;
+ struct ceph_timespec new_validity;
+ struct ceph_crypto_key new_session_key;
+ struct ceph_buffer *new_ticket_blob;
+ unsigned long new_expires, new_renew_after;
+ u64 new_secret_id;
ceph_decode_need(&p, end, sizeof(u32) + 1, bad);
goto bad;
memcpy(&old_key, &th->session_key, sizeof(old_key));
- ret = ceph_crypto_key_decode(&th->session_key, &dp, dend);
+ ret = ceph_crypto_key_decode(&new_session_key, &dp, dend);
if (ret)
goto out;
- ceph_decode_copy(&dp, &th->validity, sizeof(th->validity));
- ceph_decode_timespec(&validity, &th->validity);
- th->expires = get_seconds() + validity.tv_sec;
- th->renew_after = th->expires - (validity.tv_sec / 4);
- dout(" expires=%lu renew_after=%lu\n", th->expires,
- th->renew_after);
+ ceph_decode_copy(&dp, &new_validity, sizeof(new_validity));
+ ceph_decode_timespec(&validity, &new_validity);
+ new_expires = get_seconds() + validity.tv_sec;
+ new_renew_after = new_expires - (validity.tv_sec / 4);
+ dout(" expires=%lu renew_after=%lu\n", new_expires,
+ new_renew_after);
/* ticket blob for service */
ceph_decode_8_safe(&p, end, is_enc, bad);
dout(" ticket blob is %d bytes\n", dlen);
ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
struct_v = ceph_decode_8(&tp);
- th->secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&th->ticket_blob, &tp, tpend);
+ new_secret_id = ceph_decode_64(&tp);
+ ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
if (ret)
goto out;
+
+ /* all is well, update our ticket */
+ ceph_crypto_key_destroy(&th->session_key);
+ if (th->ticket_blob)
+ ceph_buffer_put(th->ticket_blob);
+ th->session_key = new_session_key;
+ th->ticket_blob = new_ticket_blob;
+ th->validity = new_validity;
+ th->secret_id = new_secret_id;
+ th->expires = new_expires;
+ th->renew_after = new_renew_after;
dout(" got ticket service %d (%s) secret_id %lld len %d\n",
type, ceph_entity_type_name(type), th->secret_id,
(int)th->ticket_blob->vec.iov_len);
ret = 0;
out:
- kmem_cache_free(ceph_x_ticketbuf_cachep, ticket_buf);
+ kfree(ticket_buf);
out_dbuf:
- kmem_cache_free(ceph_x_ticketbuf_cachep, dbuf);
+ kfree(dbuf);
return ret;
bad:
struct ceph_x_ticket_handler *th,
struct ceph_x_authorizer *au)
{
- int len;
+ int maxlen;
struct ceph_x_authorize_a *msg_a;
struct ceph_x_authorize_b msg_b;
void *p, *end;
dout("build_authorizer for %s %p\n",
ceph_entity_type_name(th->service), au);
- len = sizeof(*msg_a) + sizeof(msg_b) + sizeof(u32) +
- ticket_blob_len + 16;
- dout(" need len %d\n", len);
- if (au->buf && au->buf->alloc_len < len) {
+ maxlen = sizeof(*msg_a) + sizeof(msg_b) +
+ ceph_x_encrypt_buflen(ticket_blob_len);
+ dout(" need len %d\n", maxlen);
+ if (au->buf && au->buf->alloc_len < maxlen) {
ceph_buffer_put(au->buf);
au->buf = NULL;
}
if (!au->buf) {
- au->buf = ceph_buffer_new(len, GFP_NOFS);
+ au->buf = ceph_buffer_new(maxlen, GFP_NOFS);
if (!au->buf)
return -ENOMEM;
}
au->buf->vec.iov_len = p - au->buf->vec.iov_base;
dout(" built authorizer nonce %llx len %d\n", au->nonce,
(int)au->buf->vec.iov_len);
+ BUG_ON(au->buf->vec.iov_len > maxlen);
return 0;
out_buf:
remove_ticket_handler(ac, th);
}
- kmem_cache_destroy(ceph_x_ticketbuf_cachep);
-
kfree(ac->private);
ac->private = NULL;
}
int ret;
dout("ceph_x_init %p\n", ac);
+ ret = -ENOMEM;
xi = kzalloc(sizeof(*xi), GFP_NOFS);
if (!xi)
- return -ENOMEM;
+ goto out;
- ret = -ENOMEM;
- ceph_x_ticketbuf_cachep = kmem_cache_create("ceph_x_ticketbuf",
- TEMP_TICKET_BUF_LEN, 8,
- (SLAB_RECLAIM_ACCOUNT|SLAB_MEM_SPREAD),
- NULL);
- if (!ceph_x_ticketbuf_cachep)
- goto done_nomem;
ret = -EINVAL;
if (!ac->secret) {
pr_err("no secret set (for auth_x protocol)\n");
- goto done_nomem;
+ goto out_nomem;
}
ret = ceph_crypto_key_unarmor(&xi->secret, ac->secret);
if (ret)
- goto done_nomem;
+ goto out_nomem;
xi->starting = true;
xi->ticket_handlers = RB_ROOT;
ac->ops = &ceph_x_ops;
return 0;
-done_nomem:
+out_nomem:
kfree(xi);
- if (ceph_x_ticketbuf_cachep)
- kmem_cache_destroy(ceph_x_ticketbuf_cachep);
+out:
return ret;
}
#include "ceph_debug.h"
+
+#include <linux/slab.h>
+
#include "buffer.h"
#include "decode.h"
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
#include <linux/writeback.h>
if (capsnap->dirty_pages || capsnap->writing)
continue;
+ /*
+ * if cap writeback already occurred, we should have dropped
+ * the capsnap in ceph_put_wrbuffer_cap_refs.
+ */
+ BUG_ON(capsnap->dirty == 0);
+
/* pick mds, take s_mutex */
mds = __ceph_get_cap_mds(ci, &mseq);
if (session && session->s_mds != mds) {
*/
void ceph_check_caps(struct ceph_inode_info *ci, int flags,
struct ceph_mds_session *session)
+ __releases(session->s_mutex)
{
struct ceph_client *client = ceph_inode_to_client(&ci->vfs_inode);
struct ceph_mds_client *mdsc = &client->mdsc;
struct ceph_cap *cap;
int file_wanted, used;
int took_snap_rwsem = 0; /* true if mdsc->snap_rwsem held */
- int drop_session_lock = session ? 0 : 1;
int issued, implemented, want, retain, revoking, flushing = 0;
int mds = -1; /* keep track of how far we've gone through i_caps list
to avoid an infinite loop on retry */
if (queue_invalidate)
ceph_queue_invalidate(inode);
- if (session && drop_session_lock)
+ if (session)
mutex_unlock(&session->s_mutex);
if (took_snap_rwsem)
up_read(&mdsc->snap_rwsem);
} else {
pr_err("%p auth cap %p not mds%d ???\n", inode,
cap, session->s_mds);
- spin_unlock(&inode->i_lock);
}
+ spin_unlock(&inode->i_lock);
}
}
}
spin_unlock(&inode->i_lock);
- dout("put_cap_refs %p had %s %s\n", inode, ceph_cap_string(had),
- last ? "last" : "");
+ dout("put_cap_refs %p had %s%s%s\n", inode, ceph_cap_string(had),
+ last ? " last" : "", put ? " put" : "");
if (last && !flushsnaps)
ceph_check_caps(ci, 0, NULL);
{
struct inode *inode = &ci->vfs_inode;
int last = 0;
- int last_snap = 0;
+ int complete_capsnap = 0;
+ int drop_capsnap = 0;
int found = 0;
struct ceph_cap_snap *capsnap = NULL;
list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
if (capsnap->context == snapc) {
found = 1;
- capsnap->dirty_pages -= nr;
- last_snap = !capsnap->dirty_pages;
break;
}
}
BUG_ON(!found);
+ capsnap->dirty_pages -= nr;
+ if (capsnap->dirty_pages == 0) {
+ complete_capsnap = 1;
+ if (capsnap->dirty == 0)
+ /* cap writeback completed before we created
+ * the cap_snap; no FLUSHSNAP is needed */
+ drop_capsnap = 1;
+ }
dout("put_wrbuffer_cap_refs on %p cap_snap %p "
- " snap %lld %d/%d -> %d/%d %s%s\n",
+ " snap %lld %d/%d -> %d/%d %s%s%s\n",
inode, capsnap, capsnap->context->seq,
ci->i_wrbuffer_ref+nr, capsnap->dirty_pages + nr,
ci->i_wrbuffer_ref, capsnap->dirty_pages,
last ? " (wrbuffer last)" : "",
- last_snap ? " (capsnap last)" : "");
+ complete_capsnap ? " (complete capsnap)" : "",
+ drop_capsnap ? " (drop capsnap)" : "");
+ if (drop_capsnap) {
+ ceph_put_snap_context(capsnap->context);
+ list_del(&capsnap->ci_item);
+ list_del(&capsnap->flushing_item);
+ ceph_put_cap_snap(capsnap);
+ }
}
spin_unlock(&inode->i_lock);
if (last) {
ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
iput(inode);
- } else if (last_snap) {
+ } else if (complete_capsnap) {
ceph_flush_snaps(ci);
wake_up(&ci->i_cap_wq);
}
+ if (drop_capsnap)
+ iput(inode);
}
/*
* Handle a cap GRANT message from the MDS. (Note that a GRANT may
* actually be a revocation if it specifies a smaller cap set.)
*
- * caller holds s_mutex.
+ * caller holds s_mutex and i_lock, we drop both.
+ *
* return value:
* 0 - ok
* 1 - check_caps on auth cap only (writeback)
* 2 - check_caps (ack revoke)
*/
-static int handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
- struct ceph_mds_session *session,
- struct ceph_cap *cap,
- struct ceph_buffer *xattr_buf)
+static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
+ struct ceph_mds_session *session,
+ struct ceph_cap *cap,
+ struct ceph_buffer *xattr_buf)
__releases(inode->i_lock)
-
+ __releases(session->s_mutex)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
u64 size = le64_to_cpu(grant->size);
u64 max_size = le64_to_cpu(grant->max_size);
struct timespec mtime, atime, ctime;
- int reply = 0;
+ int check_caps = 0;
int wake = 0;
int writeback = 0;
int revoked_rdcache = 0;
if ((used & ~newcaps) & CEPH_CAP_FILE_BUFFER)
writeback = 1; /* will delay ack */
else if (dirty & ~newcaps)
- reply = 1; /* initiate writeback in check_caps */
+ check_caps = 1; /* initiate writeback in check_caps */
else if (((used & ~newcaps) & CEPH_CAP_FILE_CACHE) == 0 ||
revoked_rdcache)
- reply = 2; /* send revoke ack in check_caps */
+ check_caps = 2; /* send revoke ack in check_caps */
cap->issued = newcaps;
+ cap->implemented |= newcaps;
} else if (cap->issued == newcaps) {
dout("caps unchanged: %s -> %s\n",
ceph_cap_string(cap->issued), ceph_cap_string(newcaps));
* pending revocation */
wake = 1;
}
+ BUG_ON(cap->issued & ~cap->implemented);
spin_unlock(&inode->i_lock);
if (writeback)
ceph_queue_invalidate(inode);
if (wake)
wake_up(&ci->i_cap_wq);
- return reply;
+
+ if (check_caps == 1)
+ ceph_check_caps(ci, CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
+ session);
+ else if (check_caps == 2)
+ ceph_check_caps(ci, CHECK_CAPS_NODELAY, session);
+ else
+ mutex_unlock(&session->s_mutex);
}
/*
break;
}
WARN_ON(capsnap->dirty_pages || capsnap->writing);
- dout(" removing cap_snap %p follows %lld\n",
- capsnap, follows);
+ dout(" removing %p cap_snap %p follows %lld\n",
+ inode, capsnap, follows);
ceph_put_snap_context(capsnap->context);
list_del(&capsnap->ci_item);
list_del(&capsnap->flushing_item);
ci->i_cap_exporting_issued = cap->issued;
}
__ceph_remove_cap(cap);
- } else {
- WARN_ON(!cap);
}
+ /* else, we already released it */
spin_unlock(&inode->i_lock);
}
u64 cap_id;
u64 size, max_size;
u64 tid;
- int check_caps = 0;
void *snaptrace;
- int r;
dout("handle_caps from mds%d\n", mds);
case CEPH_CAP_OP_IMPORT:
handle_cap_import(mdsc, inode, h, session,
snaptrace, le32_to_cpu(h->snap_trace_len));
- check_caps = 1; /* we may have sent a RELEASE to the old auth */
- goto done;
+ ceph_check_caps(ceph_inode(inode), CHECK_CAPS_NODELAY,
+ session);
+ goto done_unlocked;
}
/* the rest require a cap */
switch (op) {
case CEPH_CAP_OP_REVOKE:
case CEPH_CAP_OP_GRANT:
- r = handle_cap_grant(inode, h, session, cap, msg->middle);
- if (r == 1)
- ceph_check_caps(ceph_inode(inode),
- CHECK_CAPS_NODELAY|CHECK_CAPS_AUTHONLY,
- session);
- else if (r == 2)
- ceph_check_caps(ceph_inode(inode),
- CHECK_CAPS_NODELAY,
- session);
- break;
+ handle_cap_grant(inode, h, session, cap, msg->middle);
+ goto done_unlocked;
case CEPH_CAP_OP_FLUSH_ACK:
handle_cap_flush_ack(inode, tid, h, session, cap);
done:
mutex_unlock(&session->s_mutex);
-
- if (check_caps)
- ceph_check_caps(ceph_inode(inode), CHECK_CAPS_NODELAY, NULL);
+done_unlocked:
if (inode)
iput(inode);
return;
struct ceph_cap *cap;
struct ceph_mds_request_release *rel = *p;
int ret = 0;
-
- dout("encode_inode_release %p mds%d drop %s unless %s\n", inode,
- mds, ceph_cap_string(drop), ceph_cap_string(unless));
+ int used = 0;
spin_lock(&inode->i_lock);
+ used = __ceph_caps_used(ci);
+
+ dout("encode_inode_release %p mds%d used %s drop %s unless %s\n", inode,
+ mds, ceph_cap_string(used), ceph_cap_string(drop),
+ ceph_cap_string(unless));
+
+ /* only drop unused caps */
+ drop &= ~used;
+
cap = __get_cap_for_mds(ci, mds);
if (cap && __cap_is_valid(cap)) {
if (force ||
#include <linux/err.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <crypto/hash.h>
#include "crypto.h"
#include "ceph_debug.h"
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
#include <linux/spinlock.h>
#include <linux/fs_struct.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include "super.h"
spin_lock(&inode->i_lock);
spin_lock(&dcache_lock);
+ last = dentry;
+
if (err < 0)
goto out_unlock;
- last = dentry;
-
p = p->prev;
filp->f_pos++;
CEPH_MDS_OP_LSSNAP : CEPH_MDS_OP_READDIR;
/* discard old result, if any */
- if (fi->last_readdir)
+ if (fi->last_readdir) {
ceph_mdsc_put_request(fi->last_readdir);
+ fi->last_readdir = NULL;
+ }
/* requery frag tree, as the frag topology may have changed */
frag = ceph_choose_frag(ceph_inode(inode), frag, NULL, NULL);
req->r_readdir_offset = fi->next_offset;
req->r_args.readdir.frag = cpu_to_le32(frag);
req->r_args.readdir.max_entries = cpu_to_le32(max_entries);
- req->r_num_caps = max_entries;
+ req->r_num_caps = max_entries + 1;
err = ceph_mdsc_do_request(mdsc, NULL, req);
if (err < 0) {
ceph_mdsc_put_request(req);
struct inode *inode = ceph_get_snapdir(parent);
dout("ENOENT on snapdir %p '%.*s', linking to snapdir %p\n",
dentry, dentry->d_name.len, dentry->d_name.name, inode);
+ BUG_ON(!d_unhashed(dentry));
d_add(dentry, inode);
err = 0;
}
* do_request, above). If there is no trace, we need
* to do it here.
*/
+
+ /* d_move screws up d_subdirs order */
+ ceph_i_clear(new_dir, CEPH_I_COMPLETE);
+
d_move(old_dentry, new_dentry);
+
+ /* ensure target dentry is invalidated, despite
+ rehashing bug in vfs_rename_dir */
+ new_dentry->d_time = jiffies;
+ ceph_dentry(new_dentry)->lease_shared_gen = 0;
}
ceph_mdsc_put_request(req);
return err;
#include "ceph_debug.h"
#include <linux/exportfs.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "super.h"
#include "ceph_debug.h"
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/file.h>
#include <linux/namei.h>
#include <linux/writeback.h>
* throw out any page cache pages in this range. this
* may block.
*/
- truncate_inode_pages_range(inode->i_mapping, pos, pos+len);
+ truncate_inode_pages_range(inode->i_mapping, pos,
+ (pos+len) | (PAGE_CACHE_SIZE-1));
} else {
pages = alloc_page_vector(num_pages);
if (IS_ERR(pages)) {
ceph_queue_caps_release(inode);
+ /*
+ * we may still have a snap_realm reference if there are stray
+ * caps in i_cap_exporting_issued or i_snap_caps.
+ */
+ if (ci->i_snap_realm) {
+ struct ceph_mds_client *mdsc =
+ &ceph_client(ci->vfs_inode.i_sb)->mdsc;
+ struct ceph_snap_realm *realm = ci->i_snap_realm;
+
+ dout(" dropping residual ref to snap realm %p\n", realm);
+ spin_lock(&realm->inodes_with_caps_lock);
+ list_del_init(&ci->i_snap_realm_item);
+ spin_unlock(&realm->inodes_with_caps_lock);
+ ceph_put_snap_realm(mdsc, realm);
+ }
+
kfree(ci->i_symlink);
while ((n = rb_first(&ci->i_fragtree)) != NULL) {
frag = rb_entry(n, struct ceph_inode_frag, node);
struct inode *in = NULL;
struct ceph_mds_reply_inode *ininfo;
struct ceph_vino vino;
+ struct ceph_client *client = ceph_sb_to_client(sb);
int i = 0;
int err = 0;
return err;
}
- if (rinfo->head->is_dentry && !req->r_aborted) {
+ /*
+ * ignore null lease/binding on snapdir ENOENT, or else we
+ * will have trouble splicing in the virtual snapdir later
+ */
+ if (rinfo->head->is_dentry && !req->r_aborted &&
+ (rinfo->head->is_target || strncmp(req->r_dentry->d_name.name,
+ client->mount_args->snapdir_name,
+ req->r_dentry->d_name.len))) {
/*
* lookup link rename : null -> possibly existing inode
* mknod symlink mkdir : null -> new inode
dn, dn->d_name.len, dn->d_name.name);
dout("fill_trace doing d_move %p -> %p\n",
req->r_old_dentry, dn);
+
+ /* d_move screws up d_subdirs order */
+ ceph_i_clear(dir, CEPH_I_COMPLETE);
+
d_move(req->r_old_dentry, dn);
dout(" src %p '%.*s' dst %p '%.*s'\n",
req->r_old_dentry,
#include "ceph_debug.h"
#include <linux/wait.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include "mds_client.h"
struct ceph_mds_session *s;
s = kzalloc(sizeof(*s), GFP_NOFS);
+ if (!s)
+ return ERR_PTR(-ENOMEM);
s->s_mdsc = mdsc;
s->s_mds = mds;
s->s_state = CEPH_MDS_SESSION_NEW;
{
dout("__unregister_request %p tid %lld\n", req, req->r_tid);
rb_erase(&req->r_node, &mdsc->request_tree);
- ceph_mdsc_put_request(req);
+ RB_CLEAR_NODE(&req->r_node);
if (req->r_unsafe_dir) {
struct ceph_inode_info *ci = ceph_inode(req->r_unsafe_dir);
list_del_init(&req->r_unsafe_dir_item);
spin_unlock(&ci->i_unsafe_lock);
}
+
+ ceph_mdsc_put_request(req);
}
/*
if (time_after_eq(jiffies, session->s_cap_ttl) &&
time_after_eq(session->s_cap_ttl, session->s_renew_requested))
pr_info("mds%d caps stale\n", session->s_mds);
+ session->s_renew_requested = jiffies;
/* do not try to renew caps until a recovering mds has reconnected
* with its clients. */
dout("send_renew_caps to mds%d (%s)\n", session->s_mds,
ceph_mds_state_name(state));
- session->s_renew_requested = jiffies;
msg = create_session_msg(CEPH_SESSION_REQUEST_RENEWCAPS,
++session->s_renew_seq);
if (IS_ERR(msg))
/* get, open session */
session = __ceph_lookup_mds_session(mdsc, mds);
- if (!session)
+ if (!session) {
session = register_session(mdsc, mds);
+ if (IS_ERR(session)) {
+ err = PTR_ERR(session);
+ goto finish;
+ }
+ }
dout("do_request mds%d session %p state %s\n", mds, session,
session_state_name(session->s_state));
if (session->s_state != CEPH_MDS_SESSION_OPEN &&
dout("handle_reply %p\n", req);
/* correct session? */
- if (!req->r_session && req->r_session != session) {
+ if (req->r_session != session) {
pr_err("mdsc_handle_reply got %llu on session mds%d"
" not mds%d\n", tid, session->s_mds,
req->r_session ? req->r_session->s_mds : -1);
*/
static void wait_unsafe_requests(struct ceph_mds_client *mdsc, u64 want_tid)
{
- struct ceph_mds_request *req = NULL;
+ struct ceph_mds_request *req = NULL, *nextreq;
struct rb_node *n;
mutex_lock(&mdsc->mutex);
dout("wait_unsafe_requests want %lld\n", want_tid);
+restart:
req = __get_oldest_req(mdsc);
while (req && req->r_tid <= want_tid) {
+ /* find next request */
+ n = rb_next(&req->r_node);
+ if (n)
+ nextreq = rb_entry(n, struct ceph_mds_request, r_node);
+ else
+ nextreq = NULL;
if ((req->r_op & CEPH_MDS_OP_WRITE)) {
/* write op */
ceph_mdsc_get_request(req);
+ if (nextreq)
+ ceph_mdsc_get_request(nextreq);
mutex_unlock(&mdsc->mutex);
dout("wait_unsafe_requests wait on %llu (want %llu)\n",
req->r_tid, want_tid);
wait_for_completion(&req->r_safe_completion);
mutex_lock(&mdsc->mutex);
- n = rb_next(&req->r_node);
ceph_mdsc_put_request(req);
- } else {
- n = rb_next(&req->r_node);
+ if (!nextreq)
+ break; /* next dne before, so we're done! */
+ if (RB_EMPTY_NODE(&nextreq->r_node)) {
+ /* next request was removed from tree */
+ ceph_mdsc_put_request(nextreq);
+ goto restart;
+ }
+ ceph_mdsc_put_request(nextreq); /* won't go away */
}
- if (!n)
- break;
- req = rb_entry(n, struct ceph_mds_request, r_node);
+ req = nextreq;
}
mutex_unlock(&mdsc->mutex);
dout("wait_unsafe_requests done\n");
#include <linux/inet.h>
#include <linux/kthread.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/string.h>
#include <net/tcp.h>
static char tag_ack = CEPH_MSGR_TAG_ACK;
static char tag_keepalive = CEPH_MSGR_TAG_KEEPALIVE;
+#ifdef CONFIG_LOCKDEP
+static struct lock_class_key socket_class;
+#endif
+
static void queue_con(struct ceph_connection *con);
static void con_work(struct work_struct *);
con->sock = sock;
sock->sk->sk_allocation = GFP_NOFS;
+#ifdef CONFIG_LOCKDEP
+ lockdep_set_class(&sock->sk->sk_lock, &socket_class);
+#endif
+
set_sock_callbacks(sock, con);
dout("connect %s\n", pr_addr(&con->peer_addr.in_addr));
con->out_msg = NULL;
}
con->in_seq = 0;
+ con->in_seq_acked = 0;
}
/*
queue_con(con);
}
+/*
+ * return true if this connection ever successfully opened
+ */
+bool ceph_con_opened(struct ceph_connection *con)
+{
+ return con->connect_seq > 0;
+}
+
/*
* generic get/put
*/
con->in_base_pos = 0;
}
-static void prepare_read_connect_retry(struct ceph_connection *con)
-{
- dout("prepare_read_connect_retry %p\n", con);
- con->in_base_pos = strlen(CEPH_BANNER) + sizeof(con->actual_peer_addr)
- + sizeof(con->peer_addr_for_me);
-}
-
static void prepare_read_ack(struct ceph_connection *con)
{
dout("prepare_read_ack %p\n", con);
}
con->auth_retry = 1;
prepare_write_connect(con->msgr, con, 0);
- prepare_read_connect_retry(con);
+ prepare_read_connect(con);
break;
case CEPH_MSGR_TAG_RESETSESSION:
unsigned front_len, middle_len, data_len, data_off;
int datacrc = con->msgr->nocrc;
int skip;
+ u64 seq;
dout("read_partial_message con %p msg %p\n", con, m);
return -EIO;
data_off = le16_to_cpu(con->in_hdr.data_off);
+ /* verify seq# */
+ seq = le64_to_cpu(con->in_hdr.seq);
+ if ((s64)seq - (s64)con->in_seq < 1) {
+ pr_info("skipping %s%lld %s seq %lld, expected %lld\n",
+ ENTITY_NAME(con->peer_name),
+ pr_addr(&con->peer_addr.in_addr),
+ seq, con->in_seq + 1);
+ con->in_base_pos = -front_len - middle_len - data_len -
+ sizeof(m->footer);
+ con->in_tag = CEPH_MSGR_TAG_READY;
+ con->in_seq++;
+ return 0;
+ } else if ((s64)seq - (s64)con->in_seq > 1) {
+ pr_err("read_partial_message bad seq %lld expected %lld\n",
+ seq, con->in_seq + 1);
+ con->error_msg = "bad message sequence # for incoming message";
+ return -EBADMSG;
+ }
+
/* allocate message? */
if (!con->in_msg) {
dout("got hdr type %d front %d data %d\n", con->in_hdr.type,
con->in_base_pos = -front_len - middle_len - data_len -
sizeof(m->footer);
con->in_tag = CEPH_MSGR_TAG_READY;
+ con->in_seq++;
return 0;
}
if (IS_ERR(con->in_msg)) {
goto out;
}
- clear_bit(BUSY, &con->state); /* to avoid an improbable race */
-
mutex_lock(&con->mutex);
if (test_bit(CLOSED, &con->state))
goto out_unlock;
ceph_msg_put(con->in_msg);
con->in_msg = NULL;
con->in_tag = CEPH_MSGR_TAG_READY;
+ con->in_seq++;
} else {
dout("con_revoke_pages %p msg %p pages %p no-op\n",
con, con->in_msg, msg);
struct ceph_connection *con);
extern void ceph_con_open(struct ceph_connection *con,
struct ceph_entity_addr *addr);
+extern bool ceph_con_opened(struct ceph_connection *con);
extern void ceph_con_close(struct ceph_connection *con);
extern void ceph_con_send(struct ceph_connection *con, struct ceph_msg *msg);
extern void ceph_con_revoke(struct ceph_connection *con, struct ceph_msg *msg);
#include "ceph_debug.h"
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/random.h>
#include <linux/sched.h>
*/
static int __reset_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd)
{
+ struct ceph_osd_request *req;
int ret = 0;
dout("__reset_osd %p osd%d\n", osd, osd->o_osd);
if (list_empty(&osd->o_requests)) {
__remove_osd(osdc, osd);
+ } else if (memcmp(&osdc->osdmap->osd_addr[osd->o_osd],
+ &osd->o_con.peer_addr,
+ sizeof(osd->o_con.peer_addr)) == 0 &&
+ !ceph_con_opened(&osd->o_con)) {
+ dout(" osd addr hasn't changed and connection never opened,"
+ " letting msgr retry");
+ /* touch each r_stamp for handle_timeout()'s benfit */
+ list_for_each_entry(req, &osd->o_requests, r_osd_item)
+ req->r_stamp = jiffies;
+ ret = -EAGAIN;
} else {
ceph_con_close(&osd->o_con);
ceph_con_open(&osd->o_con, &osdc->osdmap->osd_addr[osd->o_osd]);
reqhead->flags |= cpu_to_le32(req->r_flags); /* e.g., RETRY */
reqhead->reassert_version = req->r_reassert_version;
- req->r_sent_stamp = jiffies;
+ req->r_stamp = jiffies;
list_move_tail(&osdc->req_lru, &req->r_req_lru_item);
ceph_msg_get(req->r_request); /* send consumes a ref */
unsigned long timeout = osdc->client->mount_args->osd_timeout * HZ;
unsigned long keepalive =
osdc->client->mount_args->osd_keepalive_timeout * HZ;
- unsigned long last_sent = 0;
+ unsigned long last_stamp = 0;
struct rb_node *p;
struct list_head slow_osds;
req = list_entry(osdc->req_lru.next, struct ceph_osd_request,
r_req_lru_item);
- if (time_before(jiffies, req->r_sent_stamp + timeout))
+ if (time_before(jiffies, req->r_stamp + timeout))
break;
- BUG_ON(req == last_req && req->r_sent_stamp == last_sent);
+ BUG_ON(req == last_req && req->r_stamp == last_stamp);
last_req = req;
- last_sent = req->r_sent_stamp;
+ last_stamp = req->r_stamp;
osd = req->r_osd;
BUG_ON(!osd);
*/
INIT_LIST_HEAD(&slow_osds);
list_for_each_entry(req, &osdc->req_lru, r_req_lru_item) {
- if (time_before(jiffies, req->r_sent_stamp + keepalive))
+ if (time_before(jiffies, req->r_stamp + keepalive))
break;
osd = req->r_osd;
dout("kick_requests osd%d\n", kickosd ? kickosd->o_osd : -1);
if (kickosd) {
- __reset_osd(osdc, kickosd);
+ err = __reset_osd(osdc, kickosd);
+ if (err == -EAGAIN)
+ return 1;
} else {
for (p = rb_first(&osdc->osds); p; p = n) {
struct ceph_osd *osd =
kick:
dout("kicking %p tid %llu osd%d\n", req, req->r_tid,
- req->r_osd->o_osd);
+ req->r_osd ? req->r_osd->o_osd : -1);
req->r_flags |= CEPH_OSD_FLAG_RETRY;
err = __send_request(osdc, req);
if (err) {
char r_oid[40]; /* object name */
int r_oid_len;
- unsigned long r_sent_stamp;
+ unsigned long r_stamp; /* send OR check time */
bool r_resend; /* msg send failed, needs retry */
struct ceph_file_layout r_file_layout;
+#include "ceph_debug.h"
+
+#include <linux/slab.h>
#include <asm/div64.h>
#include "super.h"
#include "crush/hash.h"
#include "crush/mapper.h"
#include "decode.h"
-#include "ceph_debug.h"
char *ceph_osdmap_state_str(char *str, int len, int state)
{
return ERR_PTR(err);
}
-
-/*
- * osd map
- */
-void ceph_osdmap_destroy(struct ceph_osdmap *map)
-{
- dout("osdmap_destroy %p\n", map);
- if (map->crush)
- crush_destroy(map->crush);
- while (!RB_EMPTY_ROOT(&map->pg_temp)) {
- struct ceph_pg_mapping *pg =
- rb_entry(rb_first(&map->pg_temp),
- struct ceph_pg_mapping, node);
- rb_erase(&pg->node, &map->pg_temp);
- kfree(pg);
- }
- while (!RB_EMPTY_ROOT(&map->pg_pools)) {
- struct ceph_pg_pool_info *pi =
- rb_entry(rb_first(&map->pg_pools),
- struct ceph_pg_pool_info, node);
- rb_erase(&pi->node, &map->pg_pools);
- kfree(pi);
- }
- kfree(map->osd_state);
- kfree(map->osd_weight);
- kfree(map->osd_addr);
- kfree(map);
-}
-
-/*
- * adjust max osd value. reallocate arrays.
- */
-static int osdmap_set_max_osd(struct ceph_osdmap *map, int max)
-{
- u8 *state;
- struct ceph_entity_addr *addr;
- u32 *weight;
-
- state = kcalloc(max, sizeof(*state), GFP_NOFS);
- addr = kcalloc(max, sizeof(*addr), GFP_NOFS);
- weight = kcalloc(max, sizeof(*weight), GFP_NOFS);
- if (state == NULL || addr == NULL || weight == NULL) {
- kfree(state);
- kfree(addr);
- kfree(weight);
- return -ENOMEM;
- }
-
- /* copy old? */
- if (map->osd_state) {
- memcpy(state, map->osd_state, map->max_osd*sizeof(*state));
- memcpy(addr, map->osd_addr, map->max_osd*sizeof(*addr));
- memcpy(weight, map->osd_weight, map->max_osd*sizeof(*weight));
- kfree(map->osd_state);
- kfree(map->osd_addr);
- kfree(map->osd_weight);
- }
-
- map->osd_state = state;
- map->osd_weight = weight;
- map->osd_addr = addr;
- map->max_osd = max;
- return 0;
-}
-
/*
* rbtree of pg_mapping for handling pg_temp (explicit mapping of pgid
* to a set of osds)
return NULL;
}
+static void __remove_pg_pool(struct rb_root *root, struct ceph_pg_pool_info *pi)
+{
+ rb_erase(&pi->node, root);
+ kfree(pi->name);
+ kfree(pi);
+}
+
+void __decode_pool(void **p, struct ceph_pg_pool_info *pi)
+{
+ ceph_decode_copy(p, &pi->v, sizeof(pi->v));
+ calc_pg_masks(pi);
+ *p += le32_to_cpu(pi->v.num_snaps) * sizeof(u64);
+ *p += le32_to_cpu(pi->v.num_removed_snap_intervals) * sizeof(u64) * 2;
+}
+
+static int __decode_pool_names(void **p, void *end, struct ceph_osdmap *map)
+{
+ struct ceph_pg_pool_info *pi;
+ u32 num, len, pool;
+
+ ceph_decode_32_safe(p, end, num, bad);
+ dout(" %d pool names\n", num);
+ while (num--) {
+ ceph_decode_32_safe(p, end, pool, bad);
+ ceph_decode_32_safe(p, end, len, bad);
+ dout(" pool %d len %d\n", pool, len);
+ pi = __lookup_pg_pool(&map->pg_pools, pool);
+ if (pi) {
+ kfree(pi->name);
+ pi->name = kmalloc(len + 1, GFP_NOFS);
+ if (pi->name) {
+ memcpy(pi->name, *p, len);
+ pi->name[len] = '\0';
+ dout(" name is %s\n", pi->name);
+ }
+ }
+ *p += len;
+ }
+ return 0;
+
+bad:
+ return -EINVAL;
+}
+
+/*
+ * osd map
+ */
+void ceph_osdmap_destroy(struct ceph_osdmap *map)
+{
+ dout("osdmap_destroy %p\n", map);
+ if (map->crush)
+ crush_destroy(map->crush);
+ while (!RB_EMPTY_ROOT(&map->pg_temp)) {
+ struct ceph_pg_mapping *pg =
+ rb_entry(rb_first(&map->pg_temp),
+ struct ceph_pg_mapping, node);
+ rb_erase(&pg->node, &map->pg_temp);
+ kfree(pg);
+ }
+ while (!RB_EMPTY_ROOT(&map->pg_pools)) {
+ struct ceph_pg_pool_info *pi =
+ rb_entry(rb_first(&map->pg_pools),
+ struct ceph_pg_pool_info, node);
+ __remove_pg_pool(&map->pg_pools, pi);
+ }
+ kfree(map->osd_state);
+ kfree(map->osd_weight);
+ kfree(map->osd_addr);
+ kfree(map);
+}
+
+/*
+ * adjust max osd value. reallocate arrays.
+ */
+static int osdmap_set_max_osd(struct ceph_osdmap *map, int max)
+{
+ u8 *state;
+ struct ceph_entity_addr *addr;
+ u32 *weight;
+
+ state = kcalloc(max, sizeof(*state), GFP_NOFS);
+ addr = kcalloc(max, sizeof(*addr), GFP_NOFS);
+ weight = kcalloc(max, sizeof(*weight), GFP_NOFS);
+ if (state == NULL || addr == NULL || weight == NULL) {
+ kfree(state);
+ kfree(addr);
+ kfree(weight);
+ return -ENOMEM;
+ }
+
+ /* copy old? */
+ if (map->osd_state) {
+ memcpy(state, map->osd_state, map->max_osd*sizeof(*state));
+ memcpy(addr, map->osd_addr, map->max_osd*sizeof(*addr));
+ memcpy(weight, map->osd_weight, map->max_osd*sizeof(*weight));
+ kfree(map->osd_state);
+ kfree(map->osd_addr);
+ kfree(map->osd_weight);
+ }
+
+ map->osd_state = state;
+ map->osd_weight = weight;
+ map->osd_addr = addr;
+ map->max_osd = max;
+ return 0;
+}
+
/*
* decode a full map.
*/
ceph_decode_32_safe(p, end, max, bad);
while (max--) {
ceph_decode_need(p, end, 4 + 1 + sizeof(pi->v), bad);
- pi = kmalloc(sizeof(*pi), GFP_NOFS);
+ pi = kzalloc(sizeof(*pi), GFP_NOFS);
if (!pi)
goto bad;
pi->id = ceph_decode_32(p);
ev, CEPH_PG_POOL_VERSION);
goto bad;
}
- ceph_decode_copy(p, &pi->v, sizeof(pi->v));
+ __decode_pool(p, pi);
__insert_pg_pool(&map->pg_pools, pi);
- calc_pg_masks(pi);
- *p += le32_to_cpu(pi->v.num_snaps) * sizeof(u64);
- *p += le32_to_cpu(pi->v.num_removed_snap_intervals)
- * sizeof(u64) * 2;
}
+
+ if (version >= 5 && __decode_pool_names(p, end, map) < 0)
+ goto bad;
+
ceph_decode_32_safe(p, end, map->pool_max, bad);
ceph_decode_32_safe(p, end, map->flags, bad);
}
pi = __lookup_pg_pool(&map->pg_pools, pool);
if (!pi) {
- pi = kmalloc(sizeof(*pi), GFP_NOFS);
+ pi = kzalloc(sizeof(*pi), GFP_NOFS);
if (!pi) {
err = -ENOMEM;
goto bad;
pi->id = pool;
__insert_pg_pool(&map->pg_pools, pi);
}
- ceph_decode_copy(p, &pi->v, sizeof(pi->v));
- calc_pg_masks(pi);
+ __decode_pool(p, pi);
}
+ if (version >= 5 && __decode_pool_names(p, end, map) < 0)
+ goto bad;
/* old_pool */
ceph_decode_32_safe(p, end, len, bad);
ceph_decode_32_safe(p, end, pool, bad);
pi = __lookup_pg_pool(&map->pg_pools, pool);
- if (pi) {
- rb_erase(&pi->node, &map->pg_pools);
- kfree(pi);
- }
+ if (pi)
+ __remove_pg_pool(&map->pg_pools, pi);
}
/* new_up */
int id;
struct ceph_pg_pool v;
int pg_num_mask, pgp_num_mask, lpg_num_mask, lpgp_num_mask;
+ char *name;
};
struct ceph_pg_mapping {
+#include <linux/gfp.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
/*
* osdmap encoding versions
*/
-#define CEPH_OSDMAP_INC_VERSION 4
-#define CEPH_OSDMAP_VERSION 4
+#define CEPH_OSDMAP_INC_VERSION 5
+#define CEPH_OSDMAP_INC_VERSION_EXT 5
+#define CEPH_OSDMAP_VERSION 5
+#define CEPH_OSDMAP_VERSION_EXT 5
/*
* fs id
#include "ceph_debug.h"
#include <linux/sort.h>
+#include <linux/slab.h>
#include "super.h"
#include "decode.h"
because we rebuild_snap_realms() works _downward_ in
hierarchy after each update.) */
if (realm->cached_context &&
- realm->cached_context->seq <= realm->seq &&
+ realm->cached_context->seq == realm->seq &&
(!parent ||
- realm->cached_context->seq <= parent->cached_context->seq)) {
+ realm->cached_context->seq >= parent->cached_context->seq)) {
dout("build_snap_context %llx %p: %p seq %lld (%d snaps)"
" (unchanged)\n",
realm->ino, realm, realm->cached_context,
* Caller must hold snap_rwsem for read (i.e., the realm topology won't
* change).
*/
-void ceph_queue_cap_snap(struct ceph_inode_info *ci,
- struct ceph_snap_context *snapc)
+void ceph_queue_cap_snap(struct ceph_inode_info *ci)
{
struct inode *inode = &ci->vfs_inode;
struct ceph_cap_snap *capsnap;
as no new writes are allowed to start when pending, so any
writes in progress now were started before the previous
cap_snap. lucky us. */
- dout("queue_cap_snap %p snapc %p seq %llu used %d"
- " already pending\n", inode, snapc, snapc->seq, used);
+ dout("queue_cap_snap %p already pending\n", inode);
kfree(capsnap);
} else if (ci->i_wrbuffer_ref_head || (used & CEPH_CAP_FILE_WR)) {
+ struct ceph_snap_context *snapc = ci->i_head_snapc;
+
igrab(inode);
atomic_set(&capsnap->nref, 1);
INIT_LIST_HEAD(&capsnap->flushing_item);
capsnap->follows = snapc->seq - 1;
- capsnap->context = ceph_get_snap_context(snapc);
capsnap->issued = __ceph_caps_issued(ci, NULL);
capsnap->dirty = __ceph_caps_dirty(ci);
snapshot. */
capsnap->dirty_pages = ci->i_wrbuffer_ref_head;
ci->i_wrbuffer_ref_head = 0;
- ceph_put_snap_context(ci->i_head_snapc);
+ capsnap->context = snapc;
ci->i_head_snapc = NULL;
list_add_tail(&capsnap->ci_item, &ci->i_cap_snaps);
capsnap->ctime = inode->i_ctime;
capsnap->time_warp_seq = ci->i_time_warp_seq;
if (capsnap->dirty_pages) {
- dout("finish_cap_snap %p cap_snap %p snapc %p %llu s=%llu "
+ dout("finish_cap_snap %p cap_snap %p snapc %p %llu %s s=%llu "
"still has %d dirty pages\n", inode, capsnap,
capsnap->context, capsnap->context->seq,
- capsnap->size, capsnap->dirty_pages);
+ ceph_cap_string(capsnap->dirty), capsnap->size,
+ capsnap->dirty_pages);
return 0;
}
- dout("finish_cap_snap %p cap_snap %p snapc %p %llu s=%llu clean\n",
+ dout("finish_cap_snap %p cap_snap %p snapc %p %llu %s s=%llu\n",
inode, capsnap, capsnap->context,
- capsnap->context->seq, capsnap->size);
+ capsnap->context->seq, ceph_cap_string(capsnap->dirty),
+ capsnap->size);
spin_lock(&mdsc->snap_flush_lock);
list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list);
if (lastinode)
iput(lastinode);
lastinode = inode;
- ceph_queue_cap_snap(ci, realm->cached_context);
+ ceph_queue_cap_snap(ci);
spin_lock(&realm->inodes_with_caps_lock);
}
spin_unlock(&realm->inodes_with_caps_lock);
* queued (again) by ceph_update_snap_trace()
* below. Queue it _now_, under the old context.
*/
+ spin_lock(&realm->inodes_with_caps_lock);
list_del_init(&ci->i_snap_realm_item);
+ spin_unlock(&realm->inodes_with_caps_lock);
spin_unlock(&inode->i_lock);
- ceph_queue_cap_snap(ci,
- ci->i_snap_realm->cached_context);
+ ceph_queue_cap_snap(ci);
iput(inode);
continue;
continue;
ci = ceph_inode(inode);
spin_lock(&inode->i_lock);
- if (!ci->i_snap_realm)
- goto split_skip_inode;
- ceph_put_snap_realm(mdsc, ci->i_snap_realm);
- spin_lock(&realm->inodes_with_caps_lock);
- list_add(&ci->i_snap_realm_item,
- &realm->inodes_with_caps);
- ci->i_snap_realm = realm;
- spin_unlock(&realm->inodes_with_caps_lock);
- ceph_get_snap_realm(mdsc, realm);
-split_skip_inode:
+ if (list_empty(&ci->i_snap_realm_item)) {
+ struct ceph_snap_realm *oldrealm =
+ ci->i_snap_realm;
+
+ dout(" moving %p to split realm %llx %p\n",
+ inode, realm->ino, realm);
+ spin_lock(&realm->inodes_with_caps_lock);
+ list_add(&ci->i_snap_realm_item,
+ &realm->inodes_with_caps);
+ ci->i_snap_realm = realm;
+ spin_unlock(&realm->inodes_with_caps_lock);
+ ceph_get_snap_realm(mdsc, realm);
+ ceph_put_snap_realm(mdsc, oldrealm);
+ }
spin_unlock(&inode->i_lock);
iput(inode);
}
#include <linux/rwsem.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/statfs.h>
#include <linux/string.h>
#include <linux/version.h>
if (ret)
goto out_icache;
- pr_info("loaded %d.%d.%d (mon/mds/osd proto %d/%d/%d)\n",
- CEPH_VERSION_MAJOR, CEPH_VERSION_MINOR, CEPH_VERSION_PATCH,
- CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL);
+ pr_info("loaded (mon/mds/osd proto %d/%d/%d, osdmap %d/%d %d/%d)\n",
+ CEPH_MONC_PROTOCOL, CEPH_MDSC_PROTOCOL, CEPH_OSDC_PROTOCOL,
+ CEPH_OSDMAP_VERSION, CEPH_OSDMAP_VERSION_EXT,
+ CEPH_OSDMAP_INC_VERSION, CEPH_OSDMAP_INC_VERSION_EXT);
return 0;
out_icache:
#include <linux/fs.h>
#include <linux/mempool.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/writeback.h>
+#include <linux/slab.h>
#include "types.h"
#include "messenger.h"
extern void ceph_handle_snap(struct ceph_mds_client *mdsc,
struct ceph_mds_session *session,
struct ceph_msg *msg);
-extern void ceph_queue_cap_snap(struct ceph_inode_info *ci,
- struct ceph_snap_context *snapc);
+extern void ceph_queue_cap_snap(struct ceph_inode_info *ci);
extern int __ceph_finish_cap_snap(struct ceph_inode_info *ci,
struct ceph_cap_snap *capsnap);
extern void ceph_cleanup_empty_realms(struct ceph_mds_client *mdsc);
#include "decode.h"
#include <linux/xattr.h>
+#include <linux/slab.h>
static bool ceph_is_valid_xattr(const char *name)
{
#include <linux/dcache.h>
#include <linux/mount.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <linux/vfs.h>
#include <linux/fs.h>
#include "cifsglob.h"
#ifndef _CIFS_FS_SB_H
#define _CIFS_FS_SB_H
+#include <linux/backing-dev.h>
+
#define CIFS_MOUNT_NO_PERM 1 /* do not do client vfs_perm check */
#define CIFS_MOUNT_SET_UID 2 /* set current's euid in create etc. */
#define CIFS_MOUNT_SERVER_INUM 4 /* inode numbers from uniqueid from server */
#ifdef CONFIG_CIFS_DFS_UPCALL
char *mountdata; /* mount options received at mount time */
#endif
+ struct backing_dev_info bdi;
};
#endif /* _CIFS_FS_SB_H */
*/
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <keys/user-type.h>
#include <linux/key-type.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include "cifs_unicode.h"
#include "cifs_uniupr.h"
#include "cifspdu.h"
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifsacl.h"
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "cifs_debug.h"
if (cifs_sb == NULL)
return -ENOMEM;
+ rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY);
+ if (rc) {
+ kfree(cifs_sb);
+ return rc;
+ }
+
#ifdef CONFIG_CIFS_DFS_UPCALL
/* copy mount params to sb for use in submounts */
/* BB: should we move this after the mount so we
int len = strlen(data);
cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
if (cifs_sb->mountdata == NULL) {
+ bdi_destroy(&cifs_sb->bdi);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
return -ENOMEM;
sb->s_magic = CIFS_MAGIC_NUMBER;
sb->s_op = &cifs_super_ops;
+ sb->s_bdi = &cifs_sb->bdi;
/* if (cifs_sb->tcon->ses->server->maxBuf > MAX_CIFS_HDR_SIZE + 512)
sb->s_blocksize =
cifs_sb->tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE; */
}
#endif
unload_nls(cifs_sb->local_nls);
+ bdi_destroy(&cifs_sb->bdi);
kfree(cifs_sb);
}
return rc;
#endif
unload_nls(cifs_sb->local_nls);
+ bdi_destroy(&cifs_sb->bdi);
kfree(cifs_sb);
unlock_kernel();
.release = cifs_close,
.fsync = cifs_fsync,
.flush = cifs_flush,
+ .mmap = cifs_file_mmap,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
.unlocked_ioctl = cifs_ioctl,
*/
#include <linux/in.h>
#include <linux/in6.h>
+#include <linux/slab.h>
#include <linux/slow-work.h>
#include "cifs_fs_sb.h"
#include "cifsacl.h"
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/vfs.h>
+#include <linux/slab.h>
#include <linux/posix_acl_xattr.h>
#include <asm/uaccess.h>
#include "cifspdu.h"
__u32 bytes_sent;
__u16 byte_count;
+ *nbytes = 0;
+
/* cFYI(1, ("write at %lld %d bytes", offset, count));*/
if (tcon->ses == NULL)
return -ECONNABORTED;
cifs_stats_inc(&tcon->num_writes);
if (rc) {
cFYI(1, ("Send error in write = %d", rc));
- *nbytes = 0;
} else {
*nbytes = le16_to_cpu(pSMBr->CountHigh);
*nbytes = (*nbytes) << 16;
*nbytes += le16_to_cpu(pSMBr->Count);
+
+ /*
+ * Mask off high 16 bits when bytes written as returned by the
+ * server is greater than bytes requested by the client. Some
+ * OS/2 servers are known to set incorrect CountHigh values.
+ */
+ if (*nbytes > count)
+ *nbytes &= 0xFFFF;
}
cifs_buf_release(pSMB);
*nbytes = le16_to_cpu(pSMBr->CountHigh);
*nbytes = (*nbytes) << 16;
*nbytes += le16_to_cpu(pSMBr->Count);
+
+ /*
+ * Mask off high 16 bits when bytes written as returned by the
+ * server is greater than bytes requested by the client. OS/2
+ * servers are known to set incorrect CountHigh values.
+ */
+ if (*nbytes > count)
+ *nbytes &= 0xFFFF;
}
/* cifs_small_buf_release(pSMB); */ /* Freed earlier now in SendReceive2 */
}
parm_data = (struct cifs_posix_lock *)
((char *)&pSMBr->hdr.Protocol + data_offset);
- if (parm_data->lock_type == cpu_to_le16(CIFS_UNLCK))
+ if (parm_data->lock_type == __constant_cpu_to_le16(CIFS_UNLCK))
pLockData->fl_type = F_UNLCK;
+ else {
+ if (parm_data->lock_type ==
+ __constant_cpu_to_le16(CIFS_RDLCK))
+ pLockData->fl_type = F_RDLCK;
+ else if (parm_data->lock_type ==
+ __constant_cpu_to_le16(CIFS_WRLCK))
+ pLockData->fl_type = F_WRLCK;
+
+ pLockData->fl_start = parm_data->start;
+ pLockData->fl_end = parm_data->start +
+ parm_data->length - 1;
+ pLockData->fl_pid = parm_data->pid;
+ }
}
plk_err_exit:
#include <linux/string.h>
#include <linux/list.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/ctype.h>
#include <linux/utsname.h>
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/slab.h>
#include <keys/user-type.h>
#include "dns_resolve.h"
#include "cifsglob.h"
#include <linux/task_io_accounting_ops.h>
#include <linux/delay.h>
#include <linux/mount.h>
+#include <linux/slab.h>
#include <asm/div64.h>
#include "cifsfs.h"
#include "cifspdu.h"
} else {
/* if rc == ERR_SHARING_VIOLATION ? */
- rc = 0; /* do not change lock type to unlock
- since range in use */
+ rc = 0;
+
+ if (lockType & LOCKING_ANDX_SHARED_LOCK) {
+ pfLock->fl_type = F_WRLCK;
+ } else {
+ rc = CIFSSMBLock(xid, tcon, netfid, length,
+ pfLock->fl_start, 0, 1,
+ lockType | LOCKING_ANDX_SHARED_LOCK,
+ 0 /* wait flag */);
+ if (rc == 0) {
+ rc = CIFSSMBLock(xid, tcon, netfid,
+ length, pfLock->fl_start, 1, 0,
+ lockType |
+ LOCKING_ANDX_SHARED_LOCK,
+ 0 /* wait flag */);
+ pfLock->fl_type = F_RDLCK;
+ if (rc != 0)
+ cERROR(1, ("Error unlocking "
+ "previously locked range %d "
+ "during test of lock", rc));
+ rc = 0;
+ } else {
+ pfLock->fl_type = F_WRLCK;
+ rc = 0;
+ }
+ }
}
FreeXid(xid);
*/
#include <linux/fs.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include <asm/div64.h>
#include "cifsfs.h"
*/
#include <linux/fs.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <linux/namei.h>
#include "cifsfs.h"
#include "cifspdu.h"
*/
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/stat.h>
#include "cifspdu.h"
#include "cifsglob.h"
#include "ntlmssp.h"
#include "nterr.h"
#include <linux/utsname.h>
+#include <linux/slab.h>
#include "cifs_spnego.h"
extern void SMBNTencrypt(unsigned char *passwd, unsigned char *c8,
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/list.h>
+#include <linux/gfp.h>
#include <linux/wait.h>
#include <linux/net.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/posix_acl_xattr.h>
+#include <linux/slab.h>
#include "cifsfs.h"
#include "cifspdu.h"
#include "cifsglob.h"
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/file.h>
#include <linux/stat.h>
#include <linux/errno.h>
#include <linux/errno.h>
#include <linux/smp_lock.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/coda.h>
#include <linux/smp_lock.h>
#include <linux/file.h>
#include <linux/vfs.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/uaccess.h>
return -EBUSY;
}
+ error = bdi_setup_and_register(&vc->bdi, "coda", BDI_CAP_MAP_COPY);
+ if (error)
+ goto bdi_err;
+
vc->vc_sb = sb;
sb->s_fs_info = vc;
sb->s_blocksize_bits = 12;
sb->s_magic = CODA_SUPER_MAGIC;
sb->s_op = &coda_super_operations;
+ sb->s_bdi = &vc->bdi;
/* get root fid from Venus: this needs the root inode */
error = venus_rootfid(sb, &fid);
return 0;
error:
+ bdi_destroy(&vc->bdi);
+ bdi_err:
if (root)
iput(root);
if (vc)
static void coda_put_super(struct super_block *sb)
{
+ bdi_destroy(&coda_vcp(sb)->bdi);
coda_vcp(sb)->vc_sb = NULL;
sb->s_fs_info = NULL;
#include <linux/stat.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/vfs.h>
#include <linux/mm.h>
#include <linux/eventpoll.h>
#include <linux/fs_struct.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <linux/ioctl.h>
#include <linux/if.h>
#include <linux/if_bridge.h>
-#include <linux/slab.h>
#include <linux/raid/md_u.h>
#include <linux/kd.h>
#include <linux/route.h>
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/atalk.h>
+#include <linux/gfp.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci.h>
#include <linux/nbd.h>
#include <linux/random.h>
#include <linux/filter.h>
-#include <linux/pktcdvd.h>
#include <linux/hiddev.h>
COMPATIBLE_IOCTL(PPGETPHASE)
COMPATIBLE_IOCTL(PPGETFLAGS)
COMPATIBLE_IOCTL(PPSETFLAGS)
-/* pktcdvd */
-COMPATIBLE_IOCTL(PACKET_CTRL_CMD)
/* Big A */
/* sparc only */
/* Big Q for sound/OSS */
#include <linux/capability.h>
#include <linux/sched.h>
#include <linux/lockdep.h>
+#include <linux/slab.h>
#include <linux/configfs.h>
#include "configfs_internal.h"
#include <linux/mount.h>
#include <linux/pagemap.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/configfs.h>
#include "configfs_internal.h"
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <linux/configfs.h>
#include "configfs_internal.h"
#include <linux/fsnotify.h>
#include <linux/string.h>
#include <linux/magic.h>
+#include <linux/slab.h>
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/tty.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/configfs.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <net/ipv6.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include "dlm_internal.h"
#include "lock.h"
L: receive_xxxx_reply() <- R: send_xxxx_reply()
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include "dlm_internal.h"
#include <linux/dlm_device.h>
#include "memory.h"
#include <linux/file.h>
#include <linux/mutex.h>
#include <linux/sctp.h>
+#include <linux/slab.h>
#include <net/sctp/user.h>
#include <net/ipv6.h>
#include <net/genetlink.h>
#include <linux/dlm.h>
#include <linux/dlm_netlink.h>
+#include <linux/gfp.h>
#include "dlm_internal.h"
#include <linux/poll.h>
#include <linux/dlm.h>
#include <linux/dlm_plock.h>
+#include <linux/slab.h>
#include "dlm_internal.h"
#include "lockspace.h"
#include <linux/spinlock.h>
#include <linux/dlm.h>
#include <linux/dlm_device.h>
+#include <linux/slab.h>
#include "dlm_internal.h"
#include "lockspace.h"
#include <linux/crypto.h>
#include <linux/file.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ecryptfs_kernel.h"
static void ecryptfs_lower_offset_for_extent(loff_t *offset, loff_t extent_num,
struct ecryptfs_crypt_stat *crypt_stat)
{
- (*offset) = (crypt_stat->num_header_bytes_at_front
- + (crypt_stat->extent_size * extent_num));
+ (*offset) = ecryptfs_lower_header_size(crypt_stat)
+ + (crypt_stat->extent_size * extent_num);
}
/**
set_extent_mask_and_shift(crypt_stat);
crypt_stat->iv_bytes = ECRYPTFS_DEFAULT_IV_BYTES;
if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
- crypt_stat->num_header_bytes_at_front = 0;
+ crypt_stat->metadata_size = ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE;
else {
if (PAGE_CACHE_SIZE <= ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE)
- crypt_stat->num_header_bytes_at_front =
+ crypt_stat->metadata_size =
ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE;
else
- crypt_stat->num_header_bytes_at_front = PAGE_CACHE_SIZE;
+ crypt_stat->metadata_size = PAGE_CACHE_SIZE;
}
}
(*written) = MAGIC_ECRYPTFS_MARKER_SIZE_BYTES;
}
-static void
-write_ecryptfs_flags(char *page_virt, struct ecryptfs_crypt_stat *crypt_stat,
- size_t *written)
+void ecryptfs_write_crypt_stat_flags(char *page_virt,
+ struct ecryptfs_crypt_stat *crypt_stat,
+ size_t *written)
{
u32 flags = 0;
int i;
header_extent_size = (u32)crypt_stat->extent_size;
num_header_extents_at_front =
- (u16)(crypt_stat->num_header_bytes_at_front
- / crypt_stat->extent_size);
+ (u16)(crypt_stat->metadata_size / crypt_stat->extent_size);
put_unaligned_be32(header_extent_size, virt);
virt += 4;
put_unaligned_be16(num_header_extents_at_front, virt);
offset = ECRYPTFS_FILE_SIZE_BYTES;
write_ecryptfs_marker((page_virt + offset), &written);
offset += written;
- write_ecryptfs_flags((page_virt + offset), crypt_stat, &written);
+ ecryptfs_write_crypt_stat_flags((page_virt + offset), crypt_stat,
+ &written);
offset += written;
ecryptfs_write_header_metadata((page_virt + offset), crypt_stat,
&written);
rc = -EINVAL;
goto out;
}
- virt_len = crypt_stat->num_header_bytes_at_front;
+ virt_len = crypt_stat->metadata_size;
order = get_order(virt_len);
/* Released in this function */
virt = (char *)ecryptfs_get_zeroed_pages(GFP_KERNEL, order);
header_extent_size = get_unaligned_be32(virt);
virt += sizeof(__be32);
num_header_extents_at_front = get_unaligned_be16(virt);
- crypt_stat->num_header_bytes_at_front =
- (((size_t)num_header_extents_at_front
- * (size_t)header_extent_size));
+ crypt_stat->metadata_size = (((size_t)num_header_extents_at_front
+ * (size_t)header_extent_size));
(*bytes_read) = (sizeof(__be32) + sizeof(__be16));
if ((validate_header_size == ECRYPTFS_VALIDATE_HEADER_SIZE)
- && (crypt_stat->num_header_bytes_at_front
+ && (crypt_stat->metadata_size
< ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE)) {
rc = -EINVAL;
printk(KERN_WARNING "Invalid header size: [%zd]\n",
- crypt_stat->num_header_bytes_at_front);
+ crypt_stat->metadata_size);
}
return rc;
}
*/
static void set_default_header_data(struct ecryptfs_crypt_stat *crypt_stat)
{
- crypt_stat->num_header_bytes_at_front =
- ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE;
+ crypt_stat->metadata_size = ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE;
}
/**
ecryptfs_dentry,
ECRYPTFS_VALIDATE_HEADER_SIZE);
if (rc) {
+ memset(page_virt, 0, PAGE_CACHE_SIZE);
rc = ecryptfs_read_xattr_region(page_virt, ecryptfs_inode);
if (rc) {
printk(KERN_DEBUG "Valid eCryptfs headers not found in "
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/fs_stack.h>
+#include <linux/slab.h>
#include "ecryptfs_kernel.h"
/**
#include <linux/scatterlist.h>
#include <linux/hash.h>
#include <linux/nsproxy.h>
+#include <linux/backing-dev.h>
/* Version verification for shared data structures w/ userspace */
#define ECRYPTFS_VERSION_MAJOR 0x00
u32 flags;
unsigned int file_version;
size_t iv_bytes;
- size_t num_header_bytes_at_front;
+ size_t metadata_size;
size_t extent_size; /* Data extent size; default is 4096 */
size_t key_size;
size_t extent_shift;
struct ecryptfs_sb_info {
struct super_block *wsi_sb;
struct ecryptfs_mount_crypt_stat mount_crypt_stat;
+ struct backing_dev_info bdi;
};
/* file private data. */
extern struct mutex ecryptfs_daemon_hash_mux;
+static inline size_t
+ecryptfs_lower_header_size(struct ecryptfs_crypt_stat *crypt_stat)
+{
+ if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
+ return 0;
+ return crypt_stat->metadata_size;
+}
+
static inline struct ecryptfs_file_info *
ecryptfs_file_to_private(struct file *file)
{
int ecryptfs_write_metadata(struct dentry *ecryptfs_dentry);
int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry);
int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry);
+void ecryptfs_write_crypt_stat_flags(char *page_virt,
+ struct ecryptfs_crypt_stat *crypt_stat,
+ size_t *written);
int ecryptfs_read_and_validate_header_region(char *data,
struct inode *ecryptfs_inode);
int ecryptfs_read_and_validate_xattr_region(char *page_virt,
#include <linux/file.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/pagemap.h>
#include <linux/security.h>
#include <linux/mount.h>
#include <linux/crypto.h>
#include <linux/fs_stack.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ecryptfs_kernel.h"
rc = ecryptfs_read_and_validate_header_region(page_virt,
ecryptfs_dentry->d_inode);
if (rc) {
+ memset(page_virt, 0, PAGE_CACHE_SIZE);
rc = ecryptfs_read_and_validate_xattr_region(page_virt,
ecryptfs_dentry);
if (rc) {
ecryptfs_dentry->d_sb)->mount_crypt_stat;
if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED) {
if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
- file_size = (crypt_stat->num_header_bytes_at_front
+ file_size = (crypt_stat->metadata_size
+ i_size_read(lower_dentry->d_inode));
else
file_size = i_size_read(lower_dentry->d_inode);
mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
- "lower_dentry = [%s]\n", __func__, rc,
- ecryptfs_dentry->d_name.name);
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
+ "[%d] on lower_dentry = [%s]\n", __func__, rc,
+ encrypted_and_encoded_name);
goto out_d_drop;
}
if (lower_dentry->d_inode)
mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
- printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
- "lower_dentry = [%s]\n", __func__, rc,
- encrypted_and_encoded_name);
+ ecryptfs_printk(KERN_DEBUG, "%s: lookup_one_len() returned "
+ "[%d] on lower_dentry = [%s]\n", __func__, rc,
+ encrypted_and_encoded_name);
goto out_d_drop;
}
lookup_and_interpose:
rc = ecryptfs_interpose(lower_new_dentry, new_dentry, dir->i_sb, 0);
if (rc)
goto out_lock;
- fsstack_copy_attr_times(dir, lower_new_dentry->d_inode);
- fsstack_copy_inode_size(dir, lower_new_dentry->d_inode);
+ fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode);
+ fsstack_copy_inode_size(dir, lower_dir_dentry->d_inode);
old_dentry->d_inode->i_nlink =
ecryptfs_inode_to_lower(old_dentry->d_inode)->i_nlink;
i_size_write(new_dentry->d_inode, file_size_save);
return rc;
}
-static int
-ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
+static int ecryptfs_readlink_lower(struct dentry *dentry, char **buf,
+ size_t *bufsiz)
{
+ struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
char *lower_buf;
- size_t lower_bufsiz;
- struct dentry *lower_dentry;
- struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
- char *plaintext_name;
- size_t plaintext_name_size;
+ size_t lower_bufsiz = PATH_MAX;
mm_segment_t old_fs;
int rc;
- lower_dentry = ecryptfs_dentry_to_lower(dentry);
- if (!lower_dentry->d_inode->i_op->readlink) {
- rc = -EINVAL;
- goto out;
- }
- mount_crypt_stat = &ecryptfs_superblock_to_private(
- dentry->d_sb)->mount_crypt_stat;
- /*
- * If the lower filename is encrypted, it will result in a significantly
- * longer name. If needed, truncate the name after decode and decrypt.
- */
- if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
- lower_bufsiz = PATH_MAX;
- else
- lower_bufsiz = bufsiz;
- /* Released in this function */
lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
- if (lower_buf == NULL) {
- printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc [%zd] bytes\n", __func__, lower_bufsiz);
+ if (!lower_buf) {
rc = -ENOMEM;
goto out;
}
(char __user *)lower_buf,
lower_bufsiz);
set_fs(old_fs);
- if (rc >= 0) {
- rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
- &plaintext_name_size,
- dentry, lower_buf,
- rc);
- if (rc) {
- printk(KERN_ERR "%s: Error attempting to decode and "
- "decrypt filename; rc = [%d]\n", __func__,
- rc);
- goto out_free_lower_buf;
- }
- /* Check for bufsiz <= 0 done in sys_readlinkat() */
- rc = copy_to_user(buf, plaintext_name,
- min((size_t) bufsiz, plaintext_name_size));
- if (rc)
- rc = -EFAULT;
- else
- rc = plaintext_name_size;
- kfree(plaintext_name);
- fsstack_copy_attr_atime(dentry->d_inode, lower_dentry->d_inode);
- }
-out_free_lower_buf:
+ if (rc < 0)
+ goto out;
+ lower_bufsiz = rc;
+ rc = ecryptfs_decode_and_decrypt_filename(buf, bufsiz, dentry,
+ lower_buf, lower_bufsiz);
+out:
kfree(lower_buf);
+ return rc;
+}
+
+static int
+ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
+{
+ char *kbuf;
+ size_t kbufsiz, copied;
+ int rc;
+
+ rc = ecryptfs_readlink_lower(dentry, &kbuf, &kbufsiz);
+ if (rc)
+ goto out;
+ copied = min_t(size_t, bufsiz, kbufsiz);
+ rc = copy_to_user(buf, kbuf, copied) ? -EFAULT : copied;
+ kfree(kbuf);
+ fsstack_copy_attr_atime(dentry->d_inode,
+ ecryptfs_dentry_to_lower(dentry)->d_inode);
out:
return rc;
}
{
loff_t lower_size;
- lower_size = crypt_stat->num_header_bytes_at_front;
+ lower_size = ecryptfs_lower_header_size(crypt_stat);
if (upper_size != 0) {
loff_t num_extents;
return rc;
}
+int ecryptfs_getattr_link(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
+ int rc = 0;
+
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ dentry->d_sb)->mount_crypt_stat;
+ generic_fillattr(dentry->d_inode, stat);
+ if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES) {
+ char *target;
+ size_t targetsiz;
+
+ rc = ecryptfs_readlink_lower(dentry, &target, &targetsiz);
+ if (!rc) {
+ kfree(target);
+ stat->size = targetsiz;
+ }
+ }
+ return rc;
+}
+
int ecryptfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
struct kstat *stat)
{
lower_dentry = ecryptfs_dentry_to_lower(dentry);
if (!lower_dentry->d_inode->i_op->setxattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
int rc = 0;
if (!lower_dentry->d_inode->i_op->getxattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
lower_dentry = ecryptfs_dentry_to_lower(dentry);
if (!lower_dentry->d_inode->i_op->listxattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
lower_dentry = ecryptfs_dentry_to_lower(dentry);
if (!lower_dentry->d_inode->i_op->removexattr) {
- rc = -ENOSYS;
+ rc = -EOPNOTSUPP;
goto out;
}
mutex_lock(&lower_dentry->d_inode->i_mutex);
.put_link = ecryptfs_put_link,
.permission = ecryptfs_permission,
.setattr = ecryptfs_setattr,
+ .getattr = ecryptfs_getattr_link,
.setxattr = ecryptfs_setxattr,
.getxattr = ecryptfs_getxattr,
.listxattr = ecryptfs_listxattr,
#include <linux/random.h>
#include <linux/crypto.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include "ecryptfs_kernel.h"
/**
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/mount.h>
#include "ecryptfs_kernel.h"
#include <linux/key.h>
#include <linux/parser.h>
#include <linux/fs_stack.h>
+#include <linux/slab.h>
#include "ecryptfs_kernel.h"
/**
static int
ecryptfs_fill_super(struct super_block *sb, void *raw_data, int silent)
{
+ struct ecryptfs_sb_info *esi;
int rc = 0;
/* Released in ecryptfs_put_super() */
ecryptfs_set_superblock_private(sb,
kmem_cache_zalloc(ecryptfs_sb_info_cache,
GFP_KERNEL));
- if (!ecryptfs_superblock_to_private(sb)) {
+ esi = ecryptfs_superblock_to_private(sb);
+ if (!esi) {
ecryptfs_printk(KERN_WARNING, "Out of memory\n");
rc = -ENOMEM;
goto out;
}
+
+ rc = bdi_setup_and_register(&esi->bdi, "ecryptfs", BDI_CAP_MAP_COPY);
+ if (rc)
+ goto out;
+
+ sb->s_bdi = &esi->bdi;
sb->s_op = &ecryptfs_sops;
/* Released through deactivate_super(sb) from get_sb_nodev */
sb->s_root = d_alloc(NULL, &(const struct qstr) {
* 02111-1307, USA.
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/user_namespace.h>
#include <linux/nsproxy.h>
#include "ecryptfs_kernel.h"
#include <linux/random.h>
#include <linux/miscdevice.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/module.h>
#include "ecryptfs_kernel.h"
#include <linux/file.h>
#include <linux/crypto.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ecryptfs_kernel.h"
return rc;
}
+static void strip_xattr_flag(char *page_virt,
+ struct ecryptfs_crypt_stat *crypt_stat)
+{
+ if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR) {
+ size_t written;
+
+ crypt_stat->flags &= ~ECRYPTFS_METADATA_IN_XATTR;
+ ecryptfs_write_crypt_stat_flags(page_virt, crypt_stat,
+ &written);
+ crypt_stat->flags |= ECRYPTFS_METADATA_IN_XATTR;
+ }
+}
+
/**
* Header Extent:
* Octets 0-7: Unencrypted file size (big-endian)
* (big-endian)
* Octet 26: Begin RFC 2440 authentication token packet set
*/
-static void set_header_info(char *page_virt,
- struct ecryptfs_crypt_stat *crypt_stat)
-{
- size_t written;
- size_t save_num_header_bytes_at_front =
- crypt_stat->num_header_bytes_at_front;
-
- crypt_stat->num_header_bytes_at_front =
- ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE;
- ecryptfs_write_header_metadata(page_virt + 20, crypt_stat, &written);
- crypt_stat->num_header_bytes_at_front =
- save_num_header_bytes_at_front;
-}
/**
* ecryptfs_copy_up_encrypted_with_header
* num_extents_per_page)
+ extent_num_in_page);
size_t num_header_extents_at_front =
- (crypt_stat->num_header_bytes_at_front
- / crypt_stat->extent_size);
+ (crypt_stat->metadata_size / crypt_stat->extent_size);
if (view_extent_num < num_header_extents_at_front) {
/* This is a header extent */
memset(page_virt, 0, PAGE_CACHE_SIZE);
/* TODO: Support more than one header extent */
if (view_extent_num == 0) {
+ size_t written;
+
rc = ecryptfs_read_xattr_region(
page_virt, page->mapping->host);
- set_header_info(page_virt, crypt_stat);
+ strip_xattr_flag(page_virt + 16, crypt_stat);
+ ecryptfs_write_header_metadata(page_virt + 20,
+ crypt_stat,
+ &written);
}
kunmap_atomic(page_virt, KM_USER0);
flush_dcache_page(page);
/* This is an encrypted data extent */
loff_t lower_offset =
((view_extent_num * crypt_stat->extent_size)
- - crypt_stat->num_header_bytes_at_front);
+ - crypt_stat->metadata_size);
rc = ecryptfs_read_lower_page_segment(
page, (lower_offset >> PAGE_CACHE_SHIFT),
#include <linux/fs.h>
#include <linux/mount.h>
#include <linux/key.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/smp_lock.h>
#include <linux/file.h>
if (lower_dentry->d_inode) {
fput(inode_info->lower_file);
inode_info->lower_file = NULL;
- d_drop(lower_dentry);
}
}
ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
lock_kernel();
ecryptfs_destroy_mount_crypt_stat(&sb_info->mount_crypt_stat);
+ bdi_destroy(&sb_info->bdi);
kmem_cache_free(ecryptfs_sb_info_cache, sb_info);
ecryptfs_set_superblock_private(sb, NULL);
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/anon_inodes.h>
#include <linux/fs.h>
#include <linux/time.h>
+#include <linux/backing-dev.h>
#include "common.h"
/* FIXME: Remove once pnfs hits mainline
u32 s_next_generation; /* next gen # to use */
atomic_t s_curr_pending; /* number of pending commands */
uint8_t s_cred[OSD_CAP_LEN]; /* credential for the fscb */
+ struct backing_dev_info bdi; /* register our bdi with VFS */
struct pnfs_osd_data_map data_map; /* Default raid to use
* FIXME: Needed ?
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/slab.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
#include <scsi/scsi_device.h>
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <linux/slab.h>
#include <scsi/scsi_device.h>
#include <asm/div64.h>
#include <linux/vfs.h>
#include <linux/random.h>
#include <linux/exportfs.h>
+#include <linux/slab.h>
#include "exofs.h"
_exofs_print_device("Unmounting", NULL, sbi->layout.s_ods[0],
sbi->layout.s_pid);
+ bdi_destroy(&sbi->bdi);
exofs_free_sbi(sbi);
sb->s_fs_info = NULL;
}
if (!sbi)
return -ENOMEM;
+ ret = bdi_setup_and_register(&sbi->bdi, "exofs", BDI_CAP_MAP_COPY);
+ if (ret)
+ goto free_bdi;
+
/* use mount options to fill superblock */
od = osduld_path_lookup(opts->dev_name);
if (IS_ERR(od)) {
}
/* set up operation vectors */
+ sb->s_bdi = &sbi->bdi;
sb->s_fs_info = sbi;
sb->s_op = &exofs_sops;
sb->s_export_op = &exofs_export_ops;
return 0;
free_sbi:
+ bdi_destroy(&sbi->bdi);
+free_bdi:
EXOFS_ERR("Unable to mount exofs on %s pid=0x%llx err=%d\n",
opts->dev_name, sbi->layout.s_pid, ret);
exofs_free_sbi(sbi);
#include "ext2.h"
#include <linux/quotaops.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/buffer_head.h>
#include <linux/capability.h>
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .setattr = ext2_setattr,
#ifdef CONFIG_EXT2_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
const struct inode_operations ext2_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext2_follow_link,
+ .setattr = ext2_setattr,
#ifdef CONFIG_EXT2_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/ext2_fs.h>
#include <linux/time.h>
#include <linux/capability.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/jbd.h>
#include <linux/ext3_fs.h>
#include <linux/ext3_jbd.h>
inode->i_generation = sbi->s_next_generation++;
spin_unlock(&sbi->s_next_gen_lock);
- ei->i_state = EXT3_STATE_NEW;
+ ei->i_state_flags = 0;
+ ext3_set_inode_state(inode, EXT3_STATE_NEW);
+
ei->i_extra_isize =
(EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) ?
sizeof(struct ext3_inode) - EXT3_GOOD_OLD_INODE_SIZE : 0;
inode->i_mtime.tv_sec = (signed)le32_to_cpu(raw_inode->i_mtime);
inode->i_atime.tv_nsec = inode->i_ctime.tv_nsec = inode->i_mtime.tv_nsec = 0;
- ei->i_state = 0;
+ ei->i_state_flags = 0;
ei->i_dir_start_lookup = 0;
ei->i_dtime = le32_to_cpu(raw_inode->i_dtime);
/* We now have enough fields to check if the inode was active or not.
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .setattr = ext3_setattr,
#ifdef CONFIG_EXT3_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
const struct inode_operations ext3_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext3_follow_link,
+ .setattr = ext3_setattr,
#ifdef CONFIG_EXT3_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/ext3_jbd.h>
#include <linux/pagemap.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include "ext4.h"
struct ext4_system_zone {
physical += offset;
length = EXT4_SB(inode->i_sb)->s_inode_size - offset;
flags |= FIEMAP_EXTENT_DATA_INLINE;
+ brelse(iloc.bh);
} else { /* external block */
physical = EXT4_I(inode)->i_file_acl << blockbits;
length = inode->i_sb->s_blocksize;
ext4_group_t f;
f = ext4_flex_group(sbi, block_group);
- atomic_dec(&sbi->s_flex_groups[f].free_inodes);
+ atomic_dec(&sbi->s_flex_groups[f].used_dirs);
}
}
if (sbi->s_log_groups_per_flex) {
ext4_group_t f = ext4_flex_group(sbi, group);
- atomic_inc(&sbi->s_flex_groups[f].free_inodes);
+ atomic_inc(&sbi->s_flex_groups[f].used_dirs);
}
}
gdp->bg_checksum = ext4_group_desc_csum(sbi, group, gdp);
#include <linux/bio.h>
#include <linux/workqueue.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "ext4_jbd2.h"
#include "xattr.h"
sector_t lblock)
{
struct ext4_inode_info *ei = EXT4_I(inode);
- int dind_mask = EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1;
+ sector_t dind_mask = ~((sector_t)EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1);
int blk_bits;
if (lblock < EXT4_NDIR_BLOCKS)
}
ei->i_da_metadata_calc_last_lblock = lblock & dind_mask;
ei->i_da_metadata_calc_len = 1;
- blk_bits = roundup_pow_of_two(lblock + 1);
+ blk_bits = order_base_2(lblock);
return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1;
}
} else {
struct ext4_iloc iloc;
- err = ext4_get_inode_loc(inode, &iloc);
+ err = __ext4_get_inode_loc(inode, &iloc, 0);
if (err)
return err;
if (wbc->sync_mode == WB_SYNC_ALL)
(unsigned long long)iloc.bh->b_blocknr);
err = -EIO;
}
+ brelse(iloc.bh);
}
return err;
}
#include "mballoc.h"
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <trace/events/ext4.h>
/*
mb_debug(1, "gonna free %u blocks in group %u (0x%p):",
entry->count, entry->group, entry);
+ if (test_opt(sb, DISCARD)) {
+ ext4_fsblk_t discard_block;
+
+ discard_block = entry->start_blk +
+ ext4_group_first_block_no(sb, entry->group);
+ trace_ext4_discard_blocks(sb,
+ (unsigned long long)discard_block,
+ entry->count);
+ sb_issue_discard(sb, discard_block, entry->count);
+ }
+
err = ext4_mb_load_buddy(sb, entry->group, &e4b);
/* we expect to find existing buddy because it's pinned */
BUG_ON(err != 0);
page_cache_release(e4b.bd_bitmap_page);
}
ext4_unlock_group(sb, entry->group);
- if (test_opt(sb, DISCARD)) {
- ext4_fsblk_t discard_block;
-
- discard_block = entry->start_blk +
- ext4_group_first_block_no(sb, entry->group);
- trace_ext4_discard_blocks(sb,
- (unsigned long long)discard_block,
- entry->count);
- sb_issue_discard(sb, discard_block, entry->count);
- }
kmem_cache_free(ext4_free_ext_cachep, entry);
ext4_mb_release_desc(&e4b);
}
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include "ext4_jbd2.h"
#include "ext4_extents.h"
#include <linux/fs.h>
#include <linux/quotaops.h>
+#include <linux/slab.h>
#include "ext4_jbd2.h"
#include "ext4_extents.h"
#include "ext4.h"
static int ext4_unfreeze(struct super_block *sb);
static void ext4_write_super(struct super_block *sb);
static int ext4_freeze(struct super_block *sb);
+static int ext4_get_sb(struct file_system_type *fs_type, int flags,
+ const char *dev_name, void *data, struct vfsmount *mnt);
+#if !defined(CONFIG_EXT3_FS) && !defined(CONFIG_EXT3_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
+static struct file_system_type ext3_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "ext3",
+ .get_sb = ext4_get_sb,
+ .kill_sb = kill_block_super,
+ .fs_flags = FS_REQUIRES_DEV,
+};
+#define IS_EXT3_SB(sb) ((sb)->s_bdev->bd_holder == &ext3_fs_type)
+#else
+#define IS_EXT3_SB(sb) (0)
+#endif
ext4_fsblk_t ext4_block_bitmap(struct super_block *sb,
struct ext4_group_desc *bg)
* enable delayed allocation by default
* Use -o nodelalloc to turn it off
*/
- set_opt(sbi->s_mount_opt, DELALLOC);
+ if (!IS_EXT3_SB(sb))
+ set_opt(sbi->s_mount_opt, DELALLOC);
if (!parse_options((char *) data, sb, &journal_devnum,
&journal_ioprio, NULL, 0))
return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
}
-#if !defined(CONTIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
+#if !defined(CONFIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
static struct file_system_type ext2_fs_type = {
.owner = THIS_MODULE,
.name = "ext2",
static inline void unregister_as_ext2(void) { }
#endif
-#if !defined(CONTIG_EXT3_FS) && !defined(CONFIG_EXT3_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
-static struct file_system_type ext3_fs_type = {
- .owner = THIS_MODULE,
- .name = "ext3",
- .get_sb = ext4_get_sb,
- .kill_sb = kill_block_super,
- .fs_flags = FS_REQUIRES_DEV,
-};
-
+#if !defined(CONFIG_EXT3_FS) && !defined(CONFIG_EXT3_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
static inline void register_as_ext3(void)
{
int err = register_filesystem(&ext3_fs_type);
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/security.h>
+#include <linux/slab.h>
#include "ext4_jbd2.h"
#include "ext4.h"
#include "xattr.h"
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/buffer_head.h>
#include "fat.h"
{
struct fat_mount_options *opts = &MSDOS_SB(dir->i_sb)->options;
wchar_t *ip, *ext_start, *end, *name_start;
- unsigned char base[9], ext[4], buf[8], *p;
+ unsigned char base[9], ext[4], buf[5], *p;
unsigned char charbuf[NLS_MAX_CHARSET_SIZE];
int chl, chi;
int sz = 0, extlen, baselen, i, numtail_baselen, numtail2_baselen;
return 0;
}
- i = jiffies & 0xffff;
+ i = jiffies;
sz = (jiffies >> 16) & 0x7;
if (baselen > 2) {
baselen = numtail2_baselen;
name_res[baselen + 4] = '~';
name_res[baselen + 5] = '1' + sz;
while (1) {
- sprintf(buf, "%04X", i);
+ snprintf(buf, sizeof(buf), "%04X", i & 0xffff);
memcpy(&name_res[baselen], buf, 4);
if (vfat_find_form(dir, name_res) < 0)
break;
*/
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/pipe_fs_i.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
-#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
/*
#include <linux/fs.h>
#include <linux/buffer_head.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include "vxfs_extern.h"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
return ret;
}
-static void unpin_sb_for_writeback(struct super_block **psb)
+static void unpin_sb_for_writeback(struct super_block *sb)
{
- struct super_block *sb = *psb;
-
- if (sb) {
- up_read(&sb->s_umount);
- put_super(sb);
- *psb = NULL;
- }
+ up_read(&sb->s_umount);
+ put_super(sb);
}
+enum sb_pin_state {
+ SB_PINNED,
+ SB_NOT_PINNED,
+ SB_PIN_FAILED
+};
+
/*
* For WB_SYNC_NONE writeback, the caller does not have the sb pinned
* before calling writeback. So make sure that we do pin it, so it doesn't
* go away while we are writing inodes from it.
- *
- * Returns 0 if the super was successfully pinned (or pinning wasn't needed),
- * 1 if we failed.
*/
-static int pin_sb_for_writeback(struct writeback_control *wbc,
- struct inode *inode, struct super_block **psb)
+static enum sb_pin_state pin_sb_for_writeback(struct writeback_control *wbc,
+ struct super_block *sb)
{
- struct super_block *sb = inode->i_sb;
-
- /*
- * If this sb is already pinned, nothing more to do. If not and
- * *psb is non-NULL, unpin the old one first
- */
- if (sb == *psb)
- return 0;
- else if (*psb)
- unpin_sb_for_writeback(psb);
-
/*
* Caller must already hold the ref for this
*/
if (wbc->sync_mode == WB_SYNC_ALL) {
WARN_ON(!rwsem_is_locked(&sb->s_umount));
- return 0;
+ return SB_NOT_PINNED;
}
-
spin_lock(&sb_lock);
sb->s_count++;
if (down_read_trylock(&sb->s_umount)) {
if (sb->s_root) {
spin_unlock(&sb_lock);
- goto pinned;
+ return SB_PINNED;
}
/*
* umounted, drop rwsem again and fall through to failure
*/
up_read(&sb->s_umount);
}
-
sb->s_count--;
spin_unlock(&sb_lock);
- return 1;
-pinned:
- *psb = sb;
- return 0;
+ return SB_PIN_FAILED;
}
-static void writeback_inodes_wb(struct bdi_writeback *wb,
- struct writeback_control *wbc)
+/*
+ * Write a portion of b_io inodes which belong to @sb.
+ * If @wbc->sb != NULL, then find and write all such
+ * inodes. Otherwise write only ones which go sequentially
+ * in reverse order.
+ * Return 1, if the caller writeback routine should be
+ * interrupted. Otherwise return 0.
+ */
+static int writeback_sb_inodes(struct super_block *sb,
+ struct bdi_writeback *wb,
+ struct writeback_control *wbc)
{
- struct super_block *sb = wbc->sb, *pin_sb = NULL;
- const unsigned long start = jiffies; /* livelock avoidance */
-
- spin_lock(&inode_lock);
-
- if (!wbc->for_kupdate || list_empty(&wb->b_io))
- queue_io(wb, wbc->older_than_this);
-
while (!list_empty(&wb->b_io)) {
- struct inode *inode = list_entry(wb->b_io.prev,
- struct inode, i_list);
long pages_skipped;
-
- /*
- * super block given and doesn't match, skip this inode
- */
- if (sb && sb != inode->i_sb) {
+ struct inode *inode = list_entry(wb->b_io.prev,
+ struct inode, i_list);
+ if (wbc->sb && sb != inode->i_sb) {
+ /* super block given and doesn't
+ match, skip this inode */
redirty_tail(inode);
continue;
}
-
+ if (sb != inode->i_sb)
+ /* finish with this superblock */
+ return 0;
if (inode->i_state & (I_NEW | I_WILL_FREE)) {
requeue_io(inode);
continue;
}
-
/*
* Was this inode dirtied after sync_sb_inodes was called?
* This keeps sync from extra jobs and livelock.
*/
- if (inode_dirtied_after(inode, start))
- break;
-
- if (pin_sb_for_writeback(wbc, inode, &pin_sb)) {
- requeue_io(inode);
- continue;
- }
+ if (inode_dirtied_after(inode, wbc->wb_start))
+ return 1;
BUG_ON(inode->i_state & (I_FREEING | I_CLEAR));
__iget(inode);
spin_lock(&inode_lock);
if (wbc->nr_to_write <= 0) {
wbc->more_io = 1;
- break;
+ return 1;
}
if (!list_empty(&wb->b_more_io))
wbc->more_io = 1;
}
+ /* b_io is empty */
+ return 1;
+}
+
+static void writeback_inodes_wb(struct bdi_writeback *wb,
+ struct writeback_control *wbc)
+{
+ int ret = 0;
- unpin_sb_for_writeback(&pin_sb);
+ wbc->wb_start = jiffies; /* livelock avoidance */
+ spin_lock(&inode_lock);
+ if (!wbc->for_kupdate || list_empty(&wb->b_io))
+ queue_io(wb, wbc->older_than_this);
+
+ while (!list_empty(&wb->b_io)) {
+ struct inode *inode = list_entry(wb->b_io.prev,
+ struct inode, i_list);
+ struct super_block *sb = inode->i_sb;
+ enum sb_pin_state state;
+
+ if (wbc->sb && sb != wbc->sb) {
+ /* super block given and doesn't
+ match, skip this inode */
+ redirty_tail(inode);
+ continue;
+ }
+ state = pin_sb_for_writeback(wbc, sb);
+
+ if (state == SB_PIN_FAILED) {
+ requeue_io(inode);
+ continue;
+ }
+ ret = writeback_sb_inodes(sb, wb, wbc);
+ if (state == SB_PINNED)
+ unpin_sb_for_writeback(sb);
+ if (ret)
+ break;
+ }
spin_unlock(&inode_lock);
/* Leave any unwritten inodes on b_io */
}
#define FSCACHE_DEBUG_LEVEL COOKIE
#include <linux/module.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/key.h>
#include <keys/user-type.h>
#include "internal.h"
static void fscache_object_slow_work_put_ref(struct slow_work *);
static int fscache_object_slow_work_get_ref(struct slow_work *);
static void fscache_object_slow_work_execute(struct slow_work *);
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
static void fscache_object_slow_work_desc(struct slow_work *, struct seq_file *);
#endif
static void fscache_initialise_object(struct fscache_object *);
.get_ref = fscache_object_slow_work_get_ref,
.put_ref = fscache_object_slow_work_put_ref,
.execute = fscache_object_slow_work_execute,
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
.desc = fscache_object_slow_work_desc,
#endif
};
/*
* describe an object for slow-work debugging
*/
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
static void fscache_object_slow_work_desc(struct slow_work *work,
struct seq_file *m)
{
#define FSCACHE_DEBUG_LEVEL OPERATION
#include <linux/module.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "internal.h"
atomic_t fscache_op_debug_id;
/*
* describe an operation for slow-work debugging
*/
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
static void fscache_op_desc(struct slow_work *work, struct seq_file *m)
{
struct fscache_operation *op =
.get_ref = fscache_op_get_ref,
.put_ref = fscache_op_put_ref,
.execute = fscache_op_execute,
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
.desc = fscache_op_desc,
#endif
};
#include <linux/fscache-cache.h>
#include <linux/buffer_head.h>
#include <linux/pagevec.h>
+#include <linux/slab.h>
#include "internal.h"
/*
goto nobufs;
nobufs_unlock_obj:
+ spin_unlock(&cookie->stores_lock);
spin_unlock(&object->lock);
nobufs:
spin_unlock(&cookie->lock);
atomic_read(&fscache_n_object_lookups),
atomic_read(&fscache_n_object_lookups_negative),
atomic_read(&fscache_n_object_lookups_positive),
- atomic_read(&fscache_n_object_lookups_timed_out),
- atomic_read(&fscache_n_object_created));
+ atomic_read(&fscache_n_object_created),
+ atomic_read(&fscache_n_object_lookups_timed_out));
seq_printf(m, "Updates: n=%u nul=%u run=%u\n",
atomic_read(&fscache_n_updates),
#include <linux/magic.h>
#include <linux/miscdevice.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
*/
#include <linux/sched.h>
+#include <linux/gfp.h>
#include <linux/fs.h>
#include <linux/generic_acl.h>
#include <linux/posix_acl.h>
* of the GNU General Public License version 2.
*/
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
* of the GNU General Public License version 2.
*/
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
* of the GNU General Public License version 2.
*/
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
* of the GNU General Public License version 2.
*/
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/fs.h>
#include <linux/dlm.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/gfs2_ondisk.h>
#ifndef __RGRP_DOT_H__
#define __RGRP_DOT_H__
+#include <linux/slab.h>
+
struct gfs2_rgrpd;
struct gfs2_sbd;
struct gfs2_holder;
*/
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
* of the GNU General Public License version 2.
*/
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
*/
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include "btree.h"
*/
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/log2.h>
#include "btree.h"
#include <linux/cdrom.h>
#include <linux/genhd.h>
#include <linux/nls.h>
+#include <linux/slab.h>
#include "hfs_fs.h"
#include "btree.h"
#include <linux/nls.h>
#include <linux/parser.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/vfs.h>
#include <linux/nls.h>
#include <linux/mount.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "hfsplus_fs.h"
enum {
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/statfs.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/mount.h>
#include "hostfs.h"
* general buffer i/o
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include "hpfs_fn.h"
void hpfs_lock_creation(struct super_block *s)
*/
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include "hpfs_fn.h"
static int hpfs_dir_release(struct inode *inode, struct file *filp)
*/
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include "hpfs_fn.h"
void hpfs_init_inode(struct inode *i)
#include <linux/sched.h>
#include <linux/smp_lock.h>
#include <linux/bitmap.h>
+#include <linux/slab.h>
/* Mark the filesystem dirty, so that chkdsk checks it when os/2 booted */
#ifdef CONFIG_BLOCK
-#define blk_to_logical(inode, blk) (blk << (inode)->i_blkbits)
-#define logical_to_blk(inode, offset) (offset >> (inode)->i_blkbits);
+static inline sector_t logical_to_blk(struct inode *inode, loff_t offset)
+{
+ return (offset >> inode->i_blkbits);
+}
+
+static inline loff_t blk_to_logical(struct inode *inode, sector_t blk)
+{
+ return (blk << inode->i_blkbits);
+}
/**
* __generic_block_fiemap - FIEMAP for block based inodes (no locking)
- * @inode - the inode to map
- * @arg - the pointer to userspace where we copy everything to
- * @get_block - the fs's get_block function
+ * @inode: the inode to map
+ * @fieinfo: the fiemap info struct that will be passed back to userspace
+ * @start: where to start mapping in the inode
+ * @len: how much space to map
+ * @get_block: the fs's get_block function
*
* This does FIEMAP for block based inodes. Basically it will just loop
* through get_block until we hit the number of extents we want to map, or we
*/
int __generic_block_fiemap(struct inode *inode,
- struct fiemap_extent_info *fieinfo, u64 start,
- u64 len, get_block_t *get_block)
+ struct fiemap_extent_info *fieinfo, loff_t start,
+ loff_t len, get_block_t *get_block)
{
- struct buffer_head tmp;
- unsigned long long start_blk;
- long long length = 0, map_len = 0;
+ struct buffer_head map_bh;
+ sector_t start_blk, last_blk;
+ loff_t isize = i_size_read(inode);
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0, past_eof = 0, whole_file = 0;
+ bool past_eof = false, whole_file = false;
+ int ret = 0;
- if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
+ ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC);
+ if (ret)
return ret;
- start_blk = logical_to_blk(inode, start);
-
- length = (long long)min_t(u64, len, i_size_read(inode));
- if (length < len)
- whole_file = 1;
+ /*
+ * Either the i_mutex or other appropriate locking needs to be held
+ * since we expect isize to not change at all through the duration of
+ * this call.
+ */
+ if (len >= isize) {
+ whole_file = true;
+ len = isize;
+ }
- map_len = length;
+ start_blk = logical_to_blk(inode, start);
+ last_blk = logical_to_blk(inode, start + len - 1);
do {
/*
* we set b_size to the total size we want so it will map as
* many contiguous blocks as possible at once
*/
- memset(&tmp, 0, sizeof(struct buffer_head));
- tmp.b_size = map_len;
+ memset(&map_bh, 0, sizeof(struct buffer_head));
+ map_bh.b_size = len;
- ret = get_block(inode, start_blk, &tmp, 0);
+ ret = get_block(inode, start_blk, &map_bh, 0);
if (ret)
break;
/* HOLE */
- if (!buffer_mapped(&tmp)) {
- length -= blk_to_logical(inode, 1);
+ if (!buffer_mapped(&map_bh)) {
start_blk++;
/*
- * we want to handle the case where there is an
+ * We want to handle the case where there is an
* allocated block at the front of the file, and then
* nothing but holes up to the end of the file properly,
* to make sure that extent at the front gets properly
* marked with FIEMAP_EXTENT_LAST
*/
if (!past_eof &&
- blk_to_logical(inode, start_blk) >=
- blk_to_logical(inode, 0)+i_size_read(inode))
+ blk_to_logical(inode, start_blk) >= isize)
past_eof = 1;
/*
- * first hole after going past the EOF, this is our
+ * First hole after going past the EOF, this is our
* last extent
*/
if (past_eof && size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
- break;
+ } else if (size) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size, flags);
+ size = 0;
}
/* if we have holes up to/past EOF then we're done */
- if (length <= 0 || past_eof)
+ if (start_blk > last_blk || past_eof || ret)
break;
} else {
/*
- * we have gone over the length of what we wanted to
+ * We have gone over the length of what we wanted to
* map, and it wasn't the entire file, so add the extent
* we got last time and exit.
*
* are good to go, just add the extent to the fieinfo
* and break
*/
- if (length <= 0 && !whole_file) {
+ if (start_blk > last_blk && !whole_file) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
}
logical = blk_to_logical(inode, start_blk);
- phys = blk_to_logical(inode, tmp.b_blocknr);
- size = tmp.b_size;
+ phys = blk_to_logical(inode, map_bh.b_blocknr);
+ size = map_bh.b_size;
flags = FIEMAP_EXTENT_MERGED;
- length -= tmp.b_size;
start_blk += logical_to_blk(inode, size);
/*
* soon as we find a hole that the last extent we found
* is marked with FIEMAP_EXTENT_LAST
*/
- if (!past_eof &&
- logical+size >=
- blk_to_logical(inode, 0)+i_size_read(inode))
- past_eof = 1;
+ if (!past_eof && logical + size >= isize)
+ past_eof = true;
}
cond_resched();
} while (1);
- /* if ret is 1 then we just hit the end of the extent array */
+ /* If ret is 1 then we just hit the end of the extent array */
if (ret == 1)
ret = 0;
* See also Documentation/block/ioprio.txt
*
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/ioprio.h>
#include <linux/blkdev.h>
* isofs directory handling functions
*/
#include <linux/smp_lock.h>
+#include <linux/gfp.h>
#include "isofs.h"
int isofs_name_translate(struct iso_directory_record *de, char *new, struct inode *inode)
*/
#include <linux/smp_lock.h>
+#include <linux/gfp.h>
#include "isofs.h"
/*
#include <linux/fs.h>
#include <linux/jbd.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/bio.h>
#include <linux/fs.h>
#include <linux/jbd.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#endif
/*
#include <linux/fs.h>
#include <linux/jbd2.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/crc32.h>
#endif
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/lzo.h>
#endif
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/zlib.h>
#include <linux/zutil.h>
#include "nodelist.h"
#include <linux/crc32.h>
#include <linux/jffs2.h>
#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
#include "nodelist.h"
#include "debug.h"
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/time.h>
#include <linux/pagemap.h>
#include <linux/mtd/mtd.h>
#include <linux/rbtree.h>
#include <linux/crc32.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include "nodelist.h"
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/compiler.h>
#include <linux/sched.h> /* For cond_resched() */
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/namei.h>
#include "nodelist.h"
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/crc32.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/mtd/mtd.h>
#include "nodelist.h"
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/posix_acl_xattr.h>
#include "jfs_incore.h"
inode->i_op = &page_symlink_inode_operations;
inode->i_mapping->a_ops = &jfs_aops;
} else {
- inode->i_op = &jfs_symlink_inode_operations;
+ inode->i_op = &jfs_fast_symlink_inode_operations;
/*
* The inline data should be null-terminated, but
* don't let on-disk corruption crash the kernel
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include "jfs_incore.h"
#include "jfs_superblock.h"
#include "jfs_dmap.h"
bmp->db_maxag = le32_to_cpu(dbmp_le->dn_maxag);
bmp->db_agpref = le32_to_cpu(dbmp_le->dn_agpref);
bmp->db_aglevel = le32_to_cpu(dbmp_le->dn_aglevel);
- bmp->db_agheigth = le32_to_cpu(dbmp_le->dn_agheigth);
+ bmp->db_agheight = le32_to_cpu(dbmp_le->dn_agheight);
bmp->db_agwidth = le32_to_cpu(dbmp_le->dn_agwidth);
bmp->db_agstart = le32_to_cpu(dbmp_le->dn_agstart);
bmp->db_agl2size = le32_to_cpu(dbmp_le->dn_agl2size);
dbmp_le->dn_maxag = cpu_to_le32(bmp->db_maxag);
dbmp_le->dn_agpref = cpu_to_le32(bmp->db_agpref);
dbmp_le->dn_aglevel = cpu_to_le32(bmp->db_aglevel);
- dbmp_le->dn_agheigth = cpu_to_le32(bmp->db_agheigth);
+ dbmp_le->dn_agheight = cpu_to_le32(bmp->db_agheight);
dbmp_le->dn_agwidth = cpu_to_le32(bmp->db_agwidth);
dbmp_le->dn_agstart = cpu_to_le32(bmp->db_agstart);
dbmp_le->dn_agl2size = cpu_to_le32(bmp->db_agl2size);
* tree index of this allocation group within the control page.
*/
agperlev =
- (1 << (L2LPERCTL - (bmp->db_agheigth << 1))) / bmp->db_agwidth;
+ (1 << (L2LPERCTL - (bmp->db_agheight << 1))) / bmp->db_agwidth;
ti = bmp->db_agstart + bmp->db_agwidth * (agno & (agperlev - 1));
/* dmap control page trees fan-out by 4 and a single allocation
* the subtree to find the leftmost leaf that describes this
* free space.
*/
- for (k = bmp->db_agheigth; k > 0; k--) {
+ for (k = bmp->db_agheight; k > 0; k--) {
for (n = 0, m = (ti << 2) + 1; n < 4; n++) {
if (l2nb <= dcp->stree[m + n]) {
ti = m + n;
}
/*
- * compute db_aglevel, db_agheigth, db_width, db_agstart:
+ * compute db_aglevel, db_agheight, db_width, db_agstart:
* an ag is covered in aglevel dmapctl summary tree,
* at agheight level height (from leaf) with agwidth number of nodes
* each, which starts at agstart index node of the smmary tree node
bmp->db_aglevel = BMAPSZTOLEV(bmp->db_agsize);
l2nl =
bmp->db_agl2size - (L2BPERDMAP + bmp->db_aglevel * L2LPERCTL);
- bmp->db_agheigth = l2nl >> 1;
- bmp->db_agwidth = 1 << (l2nl - (bmp->db_agheigth << 1));
- for (i = 5 - bmp->db_agheigth, bmp->db_agstart = 0, n = 1; i > 0;
+ bmp->db_agheight = l2nl >> 1;
+ bmp->db_agwidth = 1 << (l2nl - (bmp->db_agheight << 1));
+ for (i = 5 - bmp->db_agheight, bmp->db_agstart = 0, n = 1; i > 0;
i--) {
bmp->db_agstart += n;
n <<= 2;
__le32 dn_maxag; /* 4: max active alloc group number */
__le32 dn_agpref; /* 4: preferred alloc group (hint) */
__le32 dn_aglevel; /* 4: dmapctl level holding the AG */
- __le32 dn_agheigth; /* 4: height in dmapctl of the AG */
+ __le32 dn_agheight; /* 4: height in dmapctl of the AG */
__le32 dn_agwidth; /* 4: width in dmapctl of the AG */
__le32 dn_agstart; /* 4: start tree index at AG height */
__le32 dn_agl2size; /* 4: l2 num of blks per alloc group */
int dn_maxag; /* max active alloc group number */
int dn_agpref; /* preferred alloc group (hint) */
int dn_aglevel; /* dmapctl level holding the AG */
- int dn_agheigth; /* height in dmapctl of the AG */
+ int dn_agheight; /* height in dmapctl of the AG */
int dn_agwidth; /* width in dmapctl of the AG */
int dn_agstart; /* start tree index at AG height */
int dn_agl2size; /* l2 num of blks per alloc group */
#define db_agsize db_bmap.dn_agsize
#define db_agl2size db_bmap.dn_agl2size
#define db_agwidth db_bmap.dn_agwidth
-#define db_agheigth db_bmap.dn_agheigth
+#define db_agheight db_bmap.dn_agheight
#define db_agstart db_bmap.dn_agstart
#define db_numag db_bmap.dn_numag
#define db_maxlevel db_bmap.dn_maxlevel
#include <linux/fs.h>
#include <linux/quotaops.h>
+#include <linux/slab.h>
#include "jfs_incore.h"
#include "jfs_superblock.h"
#include "jfs_filsys.h"
#include <linux/buffer_head.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
+#include <linux/slab.h>
#include "jfs_incore.h"
#include "jfs_inode.h"
extern const struct inode_operations jfs_file_inode_operations;
extern const struct file_operations jfs_file_operations;
extern const struct inode_operations jfs_symlink_inode_operations;
+extern const struct inode_operations jfs_fast_symlink_inode_operations;
extern const struct dentry_operations jfs_ci_dentry_operations;
#endif /* _H_JFS_INODE */
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "jfs_incore.h"
#include "jfs_filsys.h"
#include "jfs_metapage.h"
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/bio.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/buffer_head.h>
#include <linux/mempool.h>
#ifndef _H_JFS_UNICODE
#define _H_JFS_UNICODE
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include "jfs_types.h"
*/
if (ssize <= IDATASIZE) {
- ip->i_op = &jfs_symlink_inode_operations;
+ ip->i_op = &jfs_fast_symlink_inode_operations;
i_fastsymlink = JFS_IP(ip)->i_inline;
memcpy(i_fastsymlink, name, ssize);
else {
jfs_info("jfs_symlink: allocate extent ip:0x%p", ip);
- ip->i_op = &page_symlink_inode_operations;
+ ip->i_op = &jfs_symlink_inode_operations;
ip->i_mapping->a_ops = &jfs_aops;
/*
struct inode *iplist[1];
struct jfs_superblock *j_sb, *j_sb2;
uint old_agsize;
+ int agsizechanged = 0;
struct buffer_head *bh, *bh2;
/* If the volume hasn't grown, get out now */
*/
if ((rc = dbExtendFS(ipbmap, XAddress, nblocks)))
goto error_out;
+
+ agsizechanged |= (bmp->db_agsize != old_agsize);
+
/*
* the map now has extended to cover additional nblocks:
* dn_mapsize = oldMapsize + nblocks;
* will correctly identify the new ag);
*/
/* if new AG size the same as old AG size, done! */
- if (bmp->db_agsize != old_agsize) {
+ if (agsizechanged) {
if ((rc = diExtendFS(ipimap, ipbmap)))
goto error_out;
#include <linux/buffer_head.h>
#include <linux/exportfs.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/seq_file.h>
#include <linux/smp_lock.h>
return NULL;
}
-const struct inode_operations jfs_symlink_inode_operations = {
+const struct inode_operations jfs_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = jfs_follow_link,
+ .setattr = jfs_setattr,
+ .setxattr = jfs_setxattr,
+ .getxattr = jfs_getxattr,
+ .listxattr = jfs_listxattr,
+ .removexattr = jfs_removexattr,
+};
+
+const struct inode_operations jfs_symlink_inode_operations = {
+ .readlink = generic_readlink,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
+ .setattr = jfs_setattr,
.setxattr = jfs_setxattr,
.getxattr = jfs_getxattr,
.listxattr = jfs_listxattr,
#include <linux/fs.h>
#include <linux/xattr.h>
#include <linux/posix_acl_xattr.h>
+#include <linux/slab.h>
#include <linux/quotaops.h>
#include <linux/security.h>
#include "jfs_incore.h"
#include <linux/module.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/vfs.h>
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include <linux/nfs_fs.h>
#include <linux/sunrpc/clnt.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/utsname.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
+#include <linux/slab.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/xprtsock.h>
#include <linux/errno.h>
#include <linux/in.h>
#include <linux/uio.h>
-#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/types.h>
#include <linux/time.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/lockd/lockd.h>
#include <linux/lockd/share.h>
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/time.h>
-#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/lockd/lockd.h>
#include <linux/lockd/share.h>
#include <linux/string.h>
#include <linux/time.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/clnt.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/buffer_head.h>
+#include <linux/gfp.h>
#define PAGE_OFS(ofs) ((ofs) & (PAGE_SIZE-1))
prefetchw(&bvec->bv_page->flags);
end_page_writeback(page);
+ page_cache_release(page);
} while (bvec >= bio->bi_io_vec);
bio_put(bio);
if (atomic_dec_and_test(&super->s_pending_writes))
unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9);
int i;
+ if (max_pages > BIO_MAX_PAGES)
+ max_pages = BIO_MAX_PAGES;
bio = bio_alloc(GFP_NOFS, max_pages);
- BUG_ON(!bio); /* FIXME: handle this */
+ BUG_ON(!bio);
for (i = 0; i < nr_pages; i++) {
if (i >= max_pages) {
unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9);
int i;
+ if (max_pages > BIO_MAX_PAGES)
+ max_pages = BIO_MAX_PAGES;
bio = bio_alloc(GFP_NOFS, max_pages);
- BUG_ON(!bio); /* FIXME: handle this */
+ BUG_ON(!bio);
for (i = 0; i < nr_pages; i++) {
if (i >= max_pages) {
* Copyright (c) 2005-2008 Joern Engel <joern@logfs.org>
*/
#include "logfs.h"
-
+#include <linux/slab.h>
/*
* Atomic dir operations
(filler_t *)logfs_readpage, NULL);
if (IS_ERR(page))
return PTR_ERR(page);
- dd = kmap_atomic(page, KM_USER0);
+ dd = kmap(page);
BUG_ON(dd->namelen == 0);
full = filldir(buf, (char *)dd->name, be16_to_cpu(dd->namelen),
pos, be64_to_cpu(dd->ino), dd->type);
- kunmap_atomic(dd, KM_USER0);
+ kunmap(page);
page_cache_release(page);
if (full)
break;
*/
#include "logfs.h"
#include <linux/sched.h>
+#include <linux/slab.h>
/*
* Wear leveling needs to kick in when the difference between low erase
struct logfs_block *block;
int round, progress, last_progress = 0;
+ /*
+ * Doing too many changes to the segfile at once would result
+ * in a large number of aliases. Write the journal before
+ * things get out of hand.
+ */
+ if (super->s_shadow_tree.no_shadowed_segments >= MAX_OBJ_ALIASES)
+ logfs_write_anchor(sb);
+
if (no_free_segments(sb) >= target &&
super->s_no_object_aliases < MAX_OBJ_ALIASES)
return;
* Copyright (c) 2005-2008 Joern Engel <joern@logfs.org>
*/
#include "logfs.h"
+#include <linux/slab.h>
#include <linux/writeback.h>
#include <linux/backing-dev.h>
* Copyright (c) 2005-2008 Joern Engel <joern@logfs.org>
*/
#include "logfs.h"
+#include <linux/slab.h>
static void logfs_calc_free(struct super_block *sb)
{
static int journal_erase_segment(struct logfs_area *area)
{
struct super_block *sb = area->a_sb;
- struct logfs_segment_header sh;
+ union {
+ struct logfs_segment_header sh;
+ unsigned char c[ALIGN(sizeof(struct logfs_segment_header), 16)];
+ } u;
u64 ofs;
int err;
if (err)
return err;
- sh.pad = 0;
- sh.type = SEG_JOURNAL;
- sh.level = 0;
- sh.segno = cpu_to_be32(area->a_segno);
- sh.ec = cpu_to_be32(area->a_erase_count);
- sh.gec = cpu_to_be64(logfs_super(sb)->s_gec);
- sh.crc = logfs_crc32(&sh, sizeof(sh), 4);
+ memset(&u, 0, sizeof(u));
+ u.sh.pad = 0;
+ u.sh.type = SEG_JOURNAL;
+ u.sh.level = 0;
+ u.sh.segno = cpu_to_be32(area->a_segno);
+ u.sh.ec = cpu_to_be32(area->a_erase_count);
+ u.sh.gec = cpu_to_be64(logfs_super(sb)->s_gec);
+ u.sh.crc = logfs_crc32(&u.sh, sizeof(u.sh), 4);
/* This causes a bug in segment.c. Not yet. */
//logfs_set_segment_erased(sb, area->a_segno, area->a_erase_count, 0);
ofs = dev_ofs(sb, area->a_segno, 0);
- area->a_used_bytes = ALIGN(sizeof(sh), 16);
- logfs_buf_write(area, ofs, &sh, sizeof(sh));
+ area->a_used_bytes = sizeof(u);
+ logfs_buf_write(area, ofs, &u, sizeof(u));
return 0;
}
btree_grim_visitor64(&tree->new, (unsigned long)sb, account_shadow);
btree_grim_visitor64(&tree->old, (unsigned long)sb, account_shadow);
+ btree_grim_visitor32(&tree->segment_map, 0, NULL);
+ tree->no_shadowed_segments = 0;
if (li->li_block) {
/*
if (len == 0)
return logfs_write_header(super, header, 0, type);
+ BUG_ON(len > sb->s_blocksize);
compr_len = logfs_compress(buf, data, len, sb->s_blocksize);
if (compr_len < 0 || type == JE_ANCHOR) {
- BUG_ON(len > sb->s_blocksize);
memcpy(data, buf, len);
compr_len = len;
compr = COMPR_NONE;
if (ofs < 0)
return ofs;
logfs_buf_write(area, ofs, super->s_compressed_je, len);
+ BUG_ON(super->s_no_je >= MAX_JOURNAL_ENTRIES);
super->s_je_array[super->s_no_je++] = cpu_to_be64(ofs);
return 0;
}
{
struct logfs_super *super = logfs_super(sb);
struct logfs_area *area = super->s_journal_area;
+ struct btree_head32 *head = &super->s_reserved_segments;
u32 segno, ec;
int i, err;
/* Drop old segments */
journal_for_each(i)
if (super->s_journal_seg[i]) {
+ btree_remove32(head, super->s_journal_seg[i]);
logfs_set_segment_unreserved(sb,
super->s_journal_seg[i],
super->s_journal_ec[i]);
super->s_journal_seg[i] = segno;
super->s_journal_ec[i] = ec;
logfs_set_segment_reserved(sb, segno);
+ err = btree_insert32(head, segno, (void *)1, GFP_KERNEL);
+ BUG_ON(err); /* mempool should prevent this */
+ err = logfs_erase_segment(sb, segno, 1);
+ BUG_ON(err); /* FIXME: remount-ro would be nicer */
}
/* Manually move journal_area */
+ freeseg(sb, area->a_segno);
area->a_segno = super->s_journal_seg[0];
area->a_is_open = 0;
area->a_used_bytes = 0;
* struct shadow_tree
* @new: shadows where old_ofs==0, indexed by new_ofs
* @old: shadows where old_ofs!=0, indexed by old_ofs
+ * @segment_map: bitfield of segments containing shadows
+ * @no_shadowed_segment: number of segments containing shadows
*/
struct shadow_tree {
struct btree_head64 new;
struct btree_head64 old;
+ struct btree_head32 segment_map;
+ int no_shadowed_segments;
};
struct object_alias_item {
level_t level, int child_no, __be64 val);
struct logfs_block_ops {
void (*write_block)(struct logfs_block *block);
- gc_level_t (*block_level)(struct logfs_block *block);
void (*free_block)(struct super_block *sb, struct logfs_block*block);
int (*write_alias)(struct super_block *sb,
struct logfs_block *block,
write_alias_t *write_one_alias);
};
+#define MAX_JOURNAL_ENTRIES 256
+
struct logfs_super {
struct mtd_info *s_mtd; /* underlying device */
struct block_device *s_bdev; /* underlying device */
u32 s_journal_ec[LOGFS_JOURNAL_SEGS]; /* journal erasecounts */
u64 s_last_version;
struct logfs_area *s_journal_area; /* open journal segment */
- __be64 s_je_array[64];
+ __be64 s_je_array[MAX_JOURNAL_ENTRIES];
int s_no_je;
int s_sum_index; /* for the 12 summaries */
int logfs_init_mapping(struct super_block *sb);
void logfs_sync_area(struct logfs_area *area);
void logfs_sync_segments(struct super_block *sb);
+void freeseg(struct super_block *sb, u32 segno);
/* area handling */
int logfs_init_areas(struct super_block *sb);
return logfs_super(sb)->s_area[(__force u8)gc_level];
}
+static inline void logfs_mempool_destroy(mempool_t *pool)
+{
+ if (pool)
+ mempool_destroy(pool);
+}
+
#endif
*/
#include "logfs.h"
#include <linux/sched.h>
+#include <linux/slab.h>
static u64 adjust_bix(u64 bix, level_t level)
{
}
}
-static gc_level_t inode_block_level(struct logfs_block *block)
-{
- BUG_ON(block->inode->i_ino == LOGFS_INO_MASTER);
- return GC_LEVEL(LOGFS_MAX_LEVELS);
-}
-
-static gc_level_t indirect_block_level(struct logfs_block *block)
-{
- struct page *page;
- struct inode *inode;
- u64 bix;
- level_t level;
-
- page = block->page;
- inode = page->mapping->host;
- logfs_unpack_index(page->index, &bix, &level);
- return expand_level(inode->i_ino, level);
-}
-
/*
* This silences a false, yet annoying gcc warning. I hate it when my editor
* jumps into bitops.h each time I recompile this file.
static struct logfs_block_ops inode_block_ops = {
.write_block = inode_write_block,
- .block_level = inode_block_level,
.free_block = inode_free_block,
.write_alias = inode_write_alias,
};
struct logfs_block_ops indirect_block_ops = {
.write_block = indirect_write_block,
- .block_level = indirect_block_level,
.free_block = indirect_free_block,
.write_alias = indirect_write_alias,
};
mempool_free(shadow, super->s_shadow_pool);
}
+static void mark_segment(struct shadow_tree *tree, u32 segno)
+{
+ int err;
+
+ if (!btree_lookup32(&tree->segment_map, segno)) {
+ err = btree_insert32(&tree->segment_map, segno, (void *)1,
+ GFP_NOFS);
+ BUG_ON(err);
+ tree->no_shadowed_segments++;
+ }
+}
+
/**
* fill_shadow_tree - Propagate shadow tree changes due to a write
* @inode: Inode owning the page
super->s_dirty_used_bytes += shadow->new_len;
super->s_dirty_free_bytes += shadow->old_len;
+ mark_segment(tree, shadow->old_ofs >> super->s_segshift);
+ mark_segment(tree, shadow->new_ofs >> super->s_segshift);
}
}
return ret;
}
-/* Rewrite cannot mark the inode dirty but has to write it immediatly. */
int logfs_rewrite_block(struct inode *inode, u64 bix, u64 ofs,
gc_level_t gc_level, long flags)
{
if (level != 0)
alloc_indirect_block(inode, page, 0);
err = logfs_write_buf(inode, page, flags);
+ if (!err && shrink_level(gc_level) == 0) {
+ /* Rewrite cannot mark the inode dirty but has to
+ * write it immediatly.
+ * Q: Can't we just create an alias for the inode
+ * instead? And if not, why not?
+ */
+ if (inode->i_ino == LOGFS_INO_MASTER)
+ logfs_write_anchor(inode->i_sb);
+ else {
+ err = __logfs_write_inode(inode, flags);
+ }
+ }
}
logfs_put_write_page(page);
return err;
return logfs_truncate_direct(inode, size);
}
-int logfs_truncate(struct inode *inode, u64 size)
+/*
+ * Truncate, by changing the segment file, can consume a fair amount
+ * of resources. So back off from time to time and do some GC.
+ * 8 or 2048 blocks should be well within safety limits even if
+ * every single block resided in a different segment.
+ */
+#define TRUNCATE_STEP (8 * 1024 * 1024)
+int logfs_truncate(struct inode *inode, u64 target)
{
struct super_block *sb = inode->i_sb;
- int err;
+ u64 size = i_size_read(inode);
+ int err = 0;
- logfs_get_wblocks(sb, NULL, 1);
- err = __logfs_truncate(inode, size);
- if (!err)
- err = __logfs_write_inode(inode, 0);
- logfs_put_wblocks(sb, NULL, 1);
+ size = ALIGN(size, TRUNCATE_STEP);
+ while (size > target) {
+ if (size > TRUNCATE_STEP)
+ size -= TRUNCATE_STEP;
+ else
+ size = 0;
+ if (size < target)
+ size = target;
+
+ logfs_get_wblocks(sb, NULL, 1);
+ err = __logfs_truncate(inode, target);
+ if (!err)
+ err = __logfs_write_inode(inode, 0);
+ logfs_put_wblocks(sb, NULL, 1);
+ }
if (!err)
- err = vmtruncate(inode, size);
+ err = vmtruncate(inode, target);
/* I don't trust error recovery yet. */
WARN_ON(err);
struct logfs_super *super = logfs_super(sb);
destroy_meta_inode(super->s_segfile_inode);
- if (super->s_block_pool)
- mempool_destroy(super->s_block_pool);
- if (super->s_shadow_pool)
- mempool_destroy(super->s_shadow_pool);
+ logfs_mempool_destroy(super->s_block_pool);
+ logfs_mempool_destroy(super->s_shadow_pool);
}
* three kinds of objects: inodes, dentries and blocks, both data and indirect.
*/
#include "logfs.h"
+#include <linux/slab.h>
static int logfs_mark_segment_bad(struct super_block *sb, u32 segno)
{
} while (len);
}
-/*
- * bdev_writeseg will write full pages. Memset the tail to prevent data leaks.
- */
-static void pad_wbuf(struct logfs_area *area, int final)
+static void pad_partial_page(struct logfs_area *area)
{
struct super_block *sb = area->a_sb;
- struct logfs_super *super = logfs_super(sb);
struct page *page;
u64 ofs = dev_ofs(sb, area->a_segno, area->a_used_bytes);
pgoff_t index = ofs >> PAGE_SHIFT;
long offset = ofs & (PAGE_SIZE-1);
u32 len = PAGE_SIZE - offset;
- if (len == PAGE_SIZE) {
- /* The math in this function can surely use some love */
- len = 0;
- }
- if (len) {
- BUG_ON(area->a_used_bytes >= super->s_segsize);
-
- page = get_mapping_page(area->a_sb, index, 0);
+ if (len % PAGE_SIZE) {
+ page = get_mapping_page(sb, index, 0);
BUG_ON(!page); /* FIXME: reserve a pool */
memset(page_address(page) + offset, 0xff, len);
SetPagePrivate(page);
page_cache_release(page);
}
+}
- if (!final)
- return;
+static void pad_full_pages(struct logfs_area *area)
+{
+ struct super_block *sb = area->a_sb;
+ struct logfs_super *super = logfs_super(sb);
+ u64 ofs = dev_ofs(sb, area->a_segno, area->a_used_bytes);
+ u32 len = super->s_segsize - area->a_used_bytes;
+ pgoff_t index = PAGE_CACHE_ALIGN(ofs) >> PAGE_CACHE_SHIFT;
+ pgoff_t no_indizes = len >> PAGE_CACHE_SHIFT;
+ struct page *page;
- area->a_used_bytes += len;
- for ( ; area->a_used_bytes < super->s_segsize;
- area->a_used_bytes += PAGE_SIZE) {
- /* Memset another page */
- index++;
- page = get_mapping_page(area->a_sb, index, 0);
+ while (no_indizes) {
+ page = get_mapping_page(sb, index, 0);
BUG_ON(!page); /* FIXME: reserve a pool */
- memset(page_address(page), 0xff, PAGE_SIZE);
+ SetPageUptodate(page);
+ memset(page_address(page), 0xff, PAGE_CACHE_SIZE);
SetPagePrivate(page);
page_cache_release(page);
+ index++;
+ no_indizes--;
}
}
+/*
+ * bdev_writeseg will write full pages. Memset the tail to prevent data leaks.
+ * Also make sure we allocate (and memset) all pages for final writeout.
+ */
+static void pad_wbuf(struct logfs_area *area, int final)
+{
+ pad_partial_page(area);
+ if (final)
+ pad_full_pages(area);
+}
+
/*
* We have to be careful with the alias tree. Since lookup is done by bix,
* it needs to be normalized, so 14, 15, 16, etc. all match when dealing with
return 0;
}
-static gc_level_t btree_block_level(struct logfs_block *block)
-{
- return expand_level(block->ino, block->level);
-}
-
static struct logfs_block_ops btree_block_ops = {
.write_block = btree_write_block,
- .block_level = btree_block_level,
.free_block = __free_block,
.write_alias = btree_write_alias,
};
return 0;
}
-static void freeseg(struct super_block *sb, u32 segno)
+void freeseg(struct super_block *sb, u32 segno)
{
struct logfs_super *super = logfs_super(sb);
struct address_space *mapping = super->s_mapping_inode->i_mapping;
for (i--; i >= 0; i--)
free_area(super->s_area[i]);
free_area(super->s_journal_area);
- mempool_destroy(super->s_alias_pool);
+ logfs_mempool_destroy(super->s_alias_pool);
return -ENOMEM;
}
*/
#include "logfs.h"
#include <linux/bio.h>
+#include <linux/slab.h>
+#include <linux/blkdev.h>
#include <linux/mtd/mtd.h>
#include <linux/statfs.h>
#include <linux/buffer_head.h>
sb->s_fs_info = super;
sb->s_mtd = super->s_mtd;
sb->s_bdev = super->s_bdev;
+ if (sb->s_bdev)
+ sb->s_bdi = &bdev_get_queue(sb->s_bdev)->backing_dev_info;
+ if (sb->s_mtd)
+ sb->s_bdi = sb->s_mtd->backing_dev_info;
return 0;
}
}
if (valid0 && valid1 && ds_cmp(ds0, ds1)) {
printk(KERN_INFO"Superblocks don't match - fixing.\n");
- return write_one_sb(sb, super->s_devops->find_last_sb);
+ return logfs_write_sb(sb);
}
/* If neither is valid now, something's wrong. Didn't we properly
* check them before?!? */
{
int err;
+ err = logfs_open_segfile(sb);
+ if (err)
+ return err;
+
/* Repair any broken superblock copies */
err = logfs_recover_sb(sb);
if (err)
if (err)
return err;
- err = logfs_open_segfile(sb);
- if (err)
- return err;
-
/* Do one GC pass before any data gets dirtied */
logfs_gc_pass(sb);
sb->s_root = d_alloc_root(rootdir);
if (!sb->s_root)
- goto fail;
+ goto fail2;
super->s_erase_page = alloc_pages(GFP_KERNEL, 0);
if (!super->s_erase_page)
btree_init_mempool64(&super->s_shadow_tree.new, super->s_btree_pool);
btree_init_mempool64(&super->s_shadow_tree.old, super->s_btree_pool);
+ btree_init_mempool32(&super->s_shadow_tree.segment_map,
+ super->s_btree_pool);
ret = logfs_init_mapping(sb);
if (ret)
if (super->s_erase_page)
__free_page(super->s_erase_page);
super->s_devops->put_device(sb);
- mempool_destroy(super->s_btree_pool);
- mempool_destroy(super->s_alias_pool);
+ logfs_mempool_destroy(super->s_btree_pool);
+ logfs_mempool_destroy(super->s_alias_pool);
kfree(super);
log_super("LogFS: Finished unmounting\n");
}
return 0;
err1:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
err0:
kfree(super);
#include <linux/buffer_head.h>
+#include <linux/slab.h>
#include "minix.h"
enum {DEPTH = 3, DIRECT = 7}; /* Only double indirect */
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/kdev_t.h>
+#include <linux/gfp.h>
#include <linux/bio.h>
#include <linux/fs.h>
#include <linux/buffer_head.h>
static struct file *do_last(struct nameidata *nd, struct path *path,
int open_flag, int acc_mode,
- int mode, const char *pathname,
- int *want_dir)
+ int mode, const char *pathname)
{
struct dentry *dir = nd->path.dentry;
struct file *filp;
if (nd->last.name[nd->last.len]) {
if (open_flag & O_CREAT)
goto exit;
- *want_dir = 1;
+ nd->flags |= LOOKUP_DIRECTORY;
}
/* just plain open? */
if (path->dentry->d_inode->i_op->follow_link)
return NULL;
error = -ENOTDIR;
- if (*want_dir && !path->dentry->d_inode->i_op->lookup)
- goto exit_dput;
+ if (nd->flags & LOOKUP_DIRECTORY) {
+ if (!path->dentry->d_inode->i_op->lookup)
+ goto exit_dput;
+ }
path_to_nameidata(path, nd);
audit_inode(pathname, nd->path.dentry);
goto ok;
int count = 0;
int flag = open_to_namei_flags(open_flag);
int force_reval = 0;
- int want_dir = open_flag & O_DIRECTORY;
if (!(open_flag & O_CREAT))
mode = 0;
if (open_flag & O_EXCL)
nd.flags |= LOOKUP_EXCL;
}
- filp = do_last(&nd, &path, open_flag, acc_mode, mode, pathname, &want_dir);
+ if (open_flag & O_DIRECTORY)
+ nd.flags |= LOOKUP_DIRECTORY;
+ filp = do_last(&nd, &path, open_flag, acc_mode, mode, pathname);
while (unlikely(!filp)) { /* trailing symlink */
struct path holder;
struct inode *inode = path.dentry->d_inode;
}
holder = path;
nd.flags &= ~LOOKUP_PARENT;
- filp = do_last(&nd, &path, open_flag, acc_mode, mode, pathname, &want_dir);
+ filp = do_last(&nd, &path, open_flag, acc_mode, mode, pathname);
if (inode->i_op->put_link)
inode->i_op->put_link(holder.dentry, &nd, cookie);
path_put(&holder);
#include <linux/errno.h>
#include <linux/stat.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <linux/fcntl.h>
#include <linux/stat.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
#include <linux/smp_lock.h>
sb->s_blocksize_bits = 10;
sb->s_magic = NCP_SUPER_MAGIC;
sb->s_op = &ncp_sops;
+ sb->s_bdi = &server->bdi;
server = NCP_SBP(sb);
memset(server, 0, sizeof(*server));
+ error = bdi_setup_and_register(&server->bdi, "ncpfs", BDI_CAP_MAP_COPY);
+ if (error)
+ goto out_bdi;
+
server->ncp_filp = ncp_filp;
server->ncp_sock = sock;
if (server->info_filp)
fput(server->info_filp);
out_fput:
+ bdi_destroy(&server->bdi);
+out_bdi:
/* 23/12/1998 Marcin Dalecki <dalecki@cs.net.pl>:
*
* The previously used put_filp(ncp_filp); was bogous, since
kill_pid(server->m.wdog_pid, SIGTERM, 1);
put_pid(server->m.wdog_pid);
+ bdi_destroy(&server->bdi);
kfree(server->priv.data);
kfree(server->auth.object_name);
vfree(server->rxbuf);
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/mount.h>
+#include <linux/slab.h>
#include <linux/highuid.h>
#include <linux/smp_lock.h>
#include <linux/vmalloc.h>
#include <linux/stat.h>
#include <linux/time.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/shm.h>
#include <linux/errno.h>
#include <linux/mman.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/fcntl.h>
#include <linux/ncp_fs.h>
#include <linux/mm.h>
#include <linux/netdevice.h>
#include <linux/signal.h>
+#include <linux/slab.h>
#include <net/scm.h>
#include <net/sock.h>
#include <linux/ipx.h>
#include <linux/fs.h>
#include <linux/ncp_fs.h>
#include <linux/time.h>
+#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/stat.h>
#include "ncplib_kernel.h"
#include <linux/moduleparam.h>
#include <linux/mount.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <linux/sunrpc/cache.h>
#include <linux/sunrpc/rpc_pipe_fs.h>
*/
#include <linux/nfs4.h>
#include <linux/nfs_fs.h>
+#include <linux/slab.h>
#include "nfs4_fs.h"
#include "callback.h"
#include "delegation.h"
#include <linux/sunrpc/svc.h>
#include <linux/nfs4.h>
#include <linux/nfs_fs.h>
+#include <linux/slab.h>
#include "nfs4_fs.h"
#include "callback.h"
#include <linux/vfs.h>
#include <linux/inet.h>
#include <linux/in6.h>
+#include <linux/slab.h>
#include <net/ipv6.h>
#include <linux/nfs_xdr.h>
#include <linux/sunrpc/bc_xprt.h>
static void nfs_server_copy_userdata(struct nfs_server *target, struct nfs_server *source)
{
target->flags = source->flags;
+ target->rsize = source->rsize;
+ target->wsize = source->wsize;
target->acregmin = source->acregmin;
target->acregmax = source->acregmax;
target->acdirmin = source->acdirmin;
/* Initialise the client representation from the mount data */
server->flags = data->flags;
- server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR;
+ server->caps |= NFS_CAP_ATOMIC_OPEN|NFS_CAP_CHANGE_ATTR|
+ NFS_CAP_POSIX_LOCK;
server->options = data->options;
/* Get a client record */
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/spinlock.h>
static void nfs_do_free_delegation(struct nfs_delegation *delegation)
{
+ if (delegation->cred)
+ put_rpccred(delegation->cred);
kfree(delegation);
}
static void nfs_free_delegation(struct nfs_delegation *delegation)
{
- struct rpc_cred *cred;
-
- cred = rcu_dereference(delegation->cred);
- rcu_assign_pointer(delegation->cred, NULL);
call_rcu(&delegation->rcu, nfs_free_delegation_callback);
- if (cred)
- put_rpccred(cred);
}
void nfs_mark_delegation_referenced(struct nfs_delegation *delegation)
*/
void nfs_inode_reclaim_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res)
{
- struct nfs_delegation *delegation = NFS_I(inode)->delegation;
- struct rpc_cred *oldcred;
+ struct nfs_delegation *delegation;
+ struct rpc_cred *oldcred = NULL;
- if (delegation == NULL)
- return;
- memcpy(delegation->stateid.data, res->delegation.data,
- sizeof(delegation->stateid.data));
- delegation->type = res->delegation_type;
- delegation->maxsize = res->maxsize;
- oldcred = delegation->cred;
- delegation->cred = get_rpccred(cred);
- clear_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags);
- NFS_I(inode)->delegation_state = delegation->type;
- smp_wmb();
- put_rpccred(oldcred);
+ rcu_read_lock();
+ delegation = rcu_dereference(NFS_I(inode)->delegation);
+ if (delegation != NULL) {
+ spin_lock(&delegation->lock);
+ if (delegation->inode != NULL) {
+ memcpy(delegation->stateid.data, res->delegation.data,
+ sizeof(delegation->stateid.data));
+ delegation->type = res->delegation_type;
+ delegation->maxsize = res->maxsize;
+ oldcred = delegation->cred;
+ delegation->cred = get_rpccred(cred);
+ clear_bit(NFS_DELEGATION_NEED_RECLAIM,
+ &delegation->flags);
+ NFS_I(inode)->delegation_state = delegation->type;
+ spin_unlock(&delegation->lock);
+ put_rpccred(oldcred);
+ rcu_read_unlock();
+ } else {
+ /* We appear to have raced with a delegation return. */
+ spin_unlock(&delegation->lock);
+ rcu_read_unlock();
+ nfs_inode_set_delegation(inode, cred, res);
+ }
+ } else {
+ rcu_read_unlock();
+ }
}
static int nfs_do_return_delegation(struct inode *inode, struct nfs_delegation *delegation, int issync)
return inode;
}
-static struct nfs_delegation *nfs_detach_delegation_locked(struct nfs_inode *nfsi, const nfs4_stateid *stateid)
+static struct nfs_delegation *nfs_detach_delegation_locked(struct nfs_inode *nfsi,
+ const nfs4_stateid *stateid,
+ struct nfs_client *clp)
{
- struct nfs_delegation *delegation = rcu_dereference(nfsi->delegation);
+ struct nfs_delegation *delegation =
+ rcu_dereference_protected(nfsi->delegation,
+ lockdep_is_held(&clp->cl_lock));
if (delegation == NULL)
goto nomatch;
{
struct nfs_client *clp = NFS_SERVER(inode)->nfs_client;
struct nfs_inode *nfsi = NFS_I(inode);
- struct nfs_delegation *delegation;
+ struct nfs_delegation *delegation, *old_delegation;
struct nfs_delegation *freeme = NULL;
int status = 0;
spin_lock_init(&delegation->lock);
spin_lock(&clp->cl_lock);
- if (rcu_dereference(nfsi->delegation) != NULL) {
- if (memcmp(&delegation->stateid, &nfsi->delegation->stateid,
- sizeof(delegation->stateid)) == 0 &&
- delegation->type == nfsi->delegation->type) {
+ old_delegation = rcu_dereference_protected(nfsi->delegation,
+ lockdep_is_held(&clp->cl_lock));
+ if (old_delegation != NULL) {
+ if (memcmp(&delegation->stateid, &old_delegation->stateid,
+ sizeof(old_delegation->stateid)) == 0 &&
+ delegation->type == old_delegation->type) {
goto out;
}
/*
dfprintk(FILE, "%s: server %s handed out "
"a duplicate delegation!\n",
__func__, clp->cl_hostname);
- if (delegation->type <= nfsi->delegation->type) {
+ if (delegation->type <= old_delegation->type) {
freeme = delegation;
delegation = NULL;
goto out;
}
- freeme = nfs_detach_delegation_locked(nfsi, NULL);
+ freeme = nfs_detach_delegation_locked(nfsi, NULL, clp);
}
list_add_rcu(&delegation->super_list, &clp->cl_delegations);
nfsi->delegation_state = delegation->type;
if (inode == NULL)
continue;
spin_lock(&clp->cl_lock);
- delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL);
+ delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL, clp);
spin_unlock(&clp->cl_lock);
rcu_read_unlock();
if (delegation != NULL) {
struct nfs_inode *nfsi = NFS_I(inode);
struct nfs_delegation *delegation;
- if (rcu_dereference(nfsi->delegation) != NULL) {
+ if (rcu_access_pointer(nfsi->delegation) != NULL) {
spin_lock(&clp->cl_lock);
- delegation = nfs_detach_delegation_locked(nfsi, NULL);
+ delegation = nfs_detach_delegation_locked(nfsi, NULL, clp);
spin_unlock(&clp->cl_lock);
if (delegation != NULL)
nfs_do_return_delegation(inode, delegation, 0);
struct nfs_delegation *delegation;
int err = 0;
- if (rcu_dereference(nfsi->delegation) != NULL) {
+ if (rcu_access_pointer(nfsi->delegation) != NULL) {
spin_lock(&clp->cl_lock);
- delegation = nfs_detach_delegation_locked(nfsi, NULL);
+ delegation = nfs_detach_delegation_locked(nfsi, NULL, clp);
spin_unlock(&clp->cl_lock);
if (delegation != NULL) {
nfs_msync_inode(inode);
if (inode == NULL)
continue;
spin_lock(&clp->cl_lock);
- delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL);
+ delegation = nfs_detach_delegation_locked(NFS_I(inode), NULL, clp);
spin_unlock(&clp->cl_lock);
rcu_read_unlock();
if (delegation != NULL)
/* If we have submounts, don't unhash ! */
if (have_submounts(dentry))
goto out_valid;
+ if (dentry->d_flags & DCACHE_DISCONNECTED)
+ goto out_valid;
shrink_dcache_parent(dentry);
}
d_drop(dentry);
res = NULL;
goto out;
/* This turned out not to be a regular file */
+ case -EISDIR:
case -ENOTDIR:
goto no_open;
case -ELOOP:
if (!(nd->intent.open.flags & O_NOFOLLOW))
goto no_open;
- /* case -EISDIR: */
/* case -EINVAL: */
default:
goto out;
struct inode *dir;
int openflags, ret = 0;
- if (!is_atomic_open(nd))
+ if (!is_atomic_open(nd) || d_mountpoint(dentry))
goto no_open;
parent = dget_parent(dentry);
dir = parent->d_inode;
#include <linux/file.h>
#include <linux/pagemap.h>
#include <linux/kref.h>
+#include <linux/slab.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
#include <linux/hash.h>
#include <linux/string.h>
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/seq_file.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_mount.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/aio.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <asm/system.h>
{
dfprintk(PAGECACHE, "NFS: release_page(%p)\n", page);
- if (gfp & __GFP_WAIT)
+ /* Only do I/O if gfp is a superset of GFP_KERNEL */
+ if ((gfp & GFP_KERNEL) == GFP_KERNEL)
nfs_wb_page(page->mapping->host, page);
/* If PagePrivate() is set, then the page is not freeable */
if (PagePrivate(page))
#include <linux/nfs_fs_sb.h>
#include <linux/in6.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "internal.h"
#include "iostat.h"
#include <linux/vfs.h>
#include <linux/inet.h>
#include <linux/nfs_xdr.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/uaccess.h>
list_for_each_entry(pos, &nfsi->open_files, list) {
if (cred != NULL && pos->cred != cred)
continue;
- if ((pos->mode & mode) == mode) {
- ctx = get_nfs_open_context(pos);
- break;
- }
+ if ((pos->mode & (FMODE_READ|FMODE_WRITE)) != mode)
+ continue;
+ ctx = get_nfs_open_context(pos);
+ break;
}
spin_unlock(&inode->i_lock);
return ctx;
*/
#include <linux/dcache.h>
+#include <linux/gfp.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/nfs_fs.h>
#include <linux/param.h>
#include <linux/time.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/nfs.h>
#include <linux/nfs3.h>
#include <linux/nfs_fs.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
+#include <linux/slab.h>
#include <linux/nfs.h>
#include <linux/nfs3.h>
#include <linux/nfs_fs.h>
#include <linux/param.h>
#include <linux/time.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/nfs_fs.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
#include <linux/vfs.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/sunrpc/clnt.h>
#include <linux/nfs.h>
#include <linux/nfs4.h>
nfs_post_op_update_inode(dir, o_res->dir_attr);
} else
nfs_refresh_inode(dir, o_res->dir_attr);
+ if ((o_res->rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) == 0)
+ server->caps &= ~NFS_CAP_POSIX_LOCK;
if(o_res->rflags & NFS4_OPEN_RESULT_CONFIRM) {
status = _nfs4_proc_open_confirm(data);
if (status != 0)
status = PTR_ERR(state);
if (IS_ERR(state))
goto err_opendata_put;
- if ((opendata->o_res.rflags & NFS4_OPEN_RESULT_LOCKTYPE_POSIX) != 0)
+ if (server->caps & NFS_CAP_POSIX_LOCK)
set_bit(NFS_STATE_POSIX_LOCKS, &state->flags);
nfs4_opendata_put(opendata);
nfs4_put_state_owner(sp);
case -EDQUOT:
case -ENOSPC:
case -EROFS:
- lookup_instantiate_filp(nd, (struct dentry *)state, NULL);
- return 1;
+ return PTR_ERR(state);
default:
goto out_drop;
}
msg.rpc_resp = &calldata->res;
task_setup_data.callback_data = calldata;
task = rpc_run_task(&task_setup_data);
- if (IS_ERR(task))
+ if (IS_ERR(task)) {
status = PTR_ERR(task);
+ goto out;
+ }
rpc_put_task(task);
+ return 0;
out:
dprintk("<-- %s status=%d\n", __func__, status);
return status;
#include <linux/param.h>
#include <linux/time.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
if (status != 0)
goto out;
status = decode_delegreturn(&xdr);
+ if (status != 0)
+ goto out;
decode_getfattr(&xdr, res->fattr, res->server,
!RPC_IS_ASYNC(rqstp->rq_task));
out:
#include <linux/types.h>
#include <linux/param.h>
-#include <linux/slab.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/vfs.h>
#include <linux/inet.h>
#include <linux/in6.h>
+#include <linux/slab.h>
#include <net/ipv6.h>
#include <linux/netdevice.h>
#include <linux/nfs_xdr.h>
if (data->version == 4) {
error = nfs4_try_mount(flags, dev_name, data, mnt);
kfree(data->client_address);
+ kfree(data->nfs_server.export_path);
goto out;
}
#endif /* CONFIG_NFS_V4 */
devname = nfs_path(path->mnt->mnt_devname,
path->mnt->mnt_root, path->dentry,
page, PAGE_SIZE);
- if (devname == NULL)
+ if (IS_ERR(devname))
goto out_freepage;
tmp = kstrdup(devname, GFP_KERNEL);
if (tmp == NULL)
#include <linux/pagemap.h>
#include <linux/stat.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/namei.h>
struct inode *inode = page->mapping->host;
struct nfs_server *nfss = NFS_SERVER(inode);
+ page_cache_get(page);
if (atomic_long_inc_return(&nfss->writeback) >
NFS_CONGESTION_ON_THRESH) {
set_bdi_congested(&nfss->backing_dev_info,
struct nfs_server *nfss = NFS_SERVER(inode);
end_page_writeback(page);
+ page_cache_release(page);
if (atomic_long_dec_return(&nfss->writeback) < NFS_CONGESTION_OFF_THRESH)
clear_bdi_congested(&nfss->backing_dev_info, BLK_RW_ASYNC);
}
nfs_mark_request_dirty(struct nfs_page *req)
{
__set_page_dirty_nobuffers(req->wb_page);
+ __mark_inode_dirty(req->wb_page->mapping->host, I_DIRTY_DATASYNC);
}
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
req = nfs_setup_write_request(ctx, page, offset, count);
if (IS_ERR(req))
return PTR_ERR(req);
+ nfs_mark_request_dirty(req);
/* Update file length */
nfs_grow_file(page, offset, count);
nfs_mark_uptodate(page, req->wb_pgbase, req->wb_bytes);
+ nfs_mark_request_dirty(req);
nfs_clear_page_tag_locked(req);
return 0;
}
status = nfs_writepage_setup(ctx, page, offset, count);
if (status < 0)
nfs_set_pageerror(page);
- else
- __set_page_dirty_nobuffers(page);
dprintk("NFS: nfs_updatepage returns %d (isize %lld)\n",
status, (long long)i_size_read(inode));
static void nfs_writepage_release(struct nfs_page *req)
{
+ struct page *page = req->wb_page;
- if (PageError(req->wb_page) || !nfs_reschedule_unstable_write(req)) {
- nfs_end_page_writeback(req->wb_page);
+ if (PageError(req->wb_page) || !nfs_reschedule_unstable_write(req))
nfs_inode_remove_request(req);
- } else
- nfs_end_page_writeback(req->wb_page);
nfs_clear_page_tag_locked(req);
+ nfs_end_page_writeback(page);
}
static int flush_task_priority(int how)
int how)
{
struct inode *inode = req->wb_context->path.dentry->d_inode;
- int flags = (how & FLUSH_SYNC) ? 0 : RPC_TASK_ASYNC;
int priority = flush_task_priority(how);
struct rpc_task *task;
struct rpc_message msg = {
.callback_ops = call_ops,
.callback_data = data,
.workqueue = nfsiod_workqueue,
- .flags = flags,
+ .flags = RPC_TASK_ASYNC,
.priority = priority,
};
+ int ret = 0;
/* Set up the RPC argument and reply structs
* NB: take care not to mess about with data->commit et al. */
(unsigned long long)data->args.offset);
task = rpc_run_task(&task_setup_data);
- if (IS_ERR(task))
- return PTR_ERR(task);
+ if (IS_ERR(task)) {
+ ret = PTR_ERR(task);
+ goto out;
+ }
+ if (how & FLUSH_SYNC) {
+ ret = rpc_wait_for_completion_task(task);
+ if (ret == 0)
+ ret = task->tk_status;
+ }
rpc_put_task(task);
- return 0;
+out:
+ return ret;
}
/* If a nfs_flush_* function fails, it should remove reqs from @head and
*/
static void nfs_redirty_request(struct nfs_page *req)
{
+ struct page *page = req->wb_page;
+
nfs_mark_request_dirty(req);
- nfs_end_page_writeback(req->wb_page);
nfs_clear_page_tag_locked(req);
+ nfs_end_page_writeback(page);
}
/*
if (nfs_write_need_commit(data)) {
memcpy(&req->wb_verf, &data->verf, sizeof(req->wb_verf));
nfs_mark_request_commit(req);
- nfs_end_page_writeback(page);
dprintk(" marked for commit\n");
goto next;
}
dprintk(" OK\n");
remove_request:
- nfs_end_page_writeback(page);
nfs_inode_remove_request(req);
next:
nfs_clear_page_tag_locked(req);
+ nfs_end_page_writeback(page);
}
nfs_writedata_release(calldata);
}
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
+static int nfs_commit_set_lock(struct nfs_inode *nfsi, int may_wait)
+{
+ if (!test_and_set_bit(NFS_INO_COMMIT, &nfsi->flags))
+ return 1;
+ if (may_wait && !out_of_line_wait_on_bit_lock(&nfsi->flags,
+ NFS_INO_COMMIT, nfs_wait_bit_killable,
+ TASK_KILLABLE))
+ return 1;
+ return 0;
+}
+
+static void nfs_commit_clear_lock(struct nfs_inode *nfsi)
+{
+ clear_bit(NFS_INO_COMMIT, &nfsi->flags);
+ smp_mb__after_clear_bit();
+ wake_up_bit(&nfsi->flags, NFS_INO_COMMIT);
+}
+
+
static void nfs_commitdata_release(void *data)
{
struct nfs_write_data *wdata = data;
{
struct nfs_page *first = nfs_list_entry(head->next);
struct inode *inode = first->wb_context->path.dentry->d_inode;
- int flags = (how & FLUSH_SYNC) ? 0 : RPC_TASK_ASYNC;
int priority = flush_task_priority(how);
struct rpc_task *task;
struct rpc_message msg = {
.callback_ops = &nfs_commit_ops,
.callback_data = data,
.workqueue = nfsiod_workqueue,
- .flags = flags,
+ .flags = RPC_TASK_ASYNC,
.priority = priority,
};
BDI_RECLAIMABLE);
nfs_clear_page_tag_locked(req);
}
+ nfs_commit_clear_lock(NFS_I(inode));
return -ENOMEM;
}
next:
nfs_clear_page_tag_locked(req);
}
+ nfs_commit_clear_lock(NFS_I(data->inode));
nfs_commitdata_release(calldata);
}
static int nfs_commit_inode(struct inode *inode, int how)
{
LIST_HEAD(head);
- int res;
+ int may_wait = how & FLUSH_SYNC;
+ int res = 0;
+ if (!nfs_commit_set_lock(NFS_I(inode), may_wait))
+ goto out;
spin_lock(&inode->i_lock);
res = nfs_scan_commit(inode, &head, 0, 0);
spin_unlock(&inode->i_lock);
int error = nfs_commit_list(inode, &head, how);
if (error < 0)
return error;
- }
+ if (may_wait)
+ wait_on_bit(&NFS_I(inode)->flags, NFS_INO_COMMIT,
+ nfs_wait_bit_killable,
+ TASK_KILLABLE);
+ } else
+ nfs_commit_clear_lock(NFS_I(inode));
+out:
return res;
}
BUG_ON(!PageLocked(page));
for (;;) {
+ wait_on_page_writeback(page);
req = nfs_page_find_request(page);
if (req == NULL)
break;
.range_start = range_start,
.range_end = range_end,
};
- struct nfs_page *req;
- int need_commit;
int ret;
while(PagePrivate(page)) {
+ wait_on_page_writeback(page);
if (clear_page_dirty_for_io(page)) {
ret = nfs_writepage_locked(page, &wbc);
if (ret < 0)
goto out_error;
}
- req = nfs_find_and_lock_request(page);
- if (!req)
- break;
- if (IS_ERR(req)) {
- ret = PTR_ERR(req);
+ ret = sync_inode(inode, &wbc);
+ if (ret < 0)
goto out_error;
- }
- need_commit = test_bit(PG_CLEAN, &req->wb_flags);
- nfs_clear_page_tag_locked(req);
- if (need_commit) {
- ret = nfs_commit_inode(inode, FLUSH_SYNC);
- if (ret < 0)
- goto out_error;
- }
}
return 0;
out_error:
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/sunrpc/xdr.h>
#include <linux/nfsacl.h>
#include <linux/nfs3.h>
* Copyright (C) 1995, 1996 Olaf Kirch, <okir@monad.swb.de>
*/
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/module.h>
#include <linux/exportfs.h>
#include "nfsd.h"
/* FIXME: nfsacl.h is a broken header */
#include <linux/nfsacl.h>
+#include <linux/gfp.h>
#include "cache.h"
#include "xdr3.h"
#include "vfs.h"
#include "nfsd.h"
/* FIXME: nfsacl.h is a broken header */
#include <linux/nfsacl.h>
+#include <linux/gfp.h>
#include "cache.h"
#include "xdr3.h"
#include "vfs.h"
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <linux/slab.h>
#include <linux/nfs_fs.h>
#include <linux/nfs4_acl.h>
*/
#include <linux/sunrpc/clnt.h>
+#include <linux/slab.h>
#include "nfsd.h"
#include "state.h"
#include <linux/nfsd_idmap.h>
#include <linux/seq_file.h>
#include <linux/sched.h>
+#include <linux/slab.h>
/*
* Cache entry
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/file.h>
+#include <linux/slab.h>
#include "cache.h"
#include "xdr4.h"
*/
#include <linux/file.h>
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/crypto.h>
#include <linux/sched.h>
#include <linux/file.h>
#include <linux/smp_lock.h>
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/swap.h>
#include <linux/sunrpc/svcauth_gss.h>
* at the end of nfs4svc_decode_compoundargs.
*/
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/statfs.h>
#include <linux/utsname.h>
argp->p = page_address(argp->pagelist[0]);
argp->pagelist++;
if (argp->pagelen < PAGE_SIZE) {
- argp->end = p + (argp->pagelen>>2);
+ argp->end = argp->p + (argp->pagelen>>2);
argp->pagelen = 0;
} else {
- argp->end = p + (PAGE_SIZE>>2);
+ argp->end = argp->p + (PAGE_SIZE>>2);
argp->pagelen -= PAGE_SIZE;
}
memcpy(((char*)p)+avail, argp->p, (nbytes - avail));
argp->p = page_address(argp->pagelist[0]);
argp->pagelist++;
if (argp->pagelen < PAGE_SIZE) {
- argp->end = p + (argp->pagelen>>2);
+ argp->end = argp->p + (argp->pagelen>>2);
argp->pagelen = 0;
} else {
- argp->end = p + (PAGE_SIZE>>2);
+ argp->end = argp->p + (PAGE_SIZE>>2);
argp->pagelen -= PAGE_SIZE;
}
}
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*/
+#include <linux/slab.h>
+
#include "nfsd.h"
#include "cache.h"
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*/
+#include <linux/slab.h>
#include <linux/namei.h>
#include <linux/ctype.h>
#include <linux/xattr.h>
#include <linux/jhash.h>
#include <linux/ima.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/exportfs.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
#include <linux/fs.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include "mdt.h"
#include "alloc.h"
bitmap = bitmap_kaddr + bh_offset(req->pr_bitmap_bh);
if (!nilfs_clear_bit_atomic(nilfs_mdt_bgl_lock(inode, group),
group_offset, bitmap))
- printk(KERN_WARNING "%s: entry numer %llu already freed\n",
+ printk(KERN_WARNING "%s: entry number %llu already freed\n",
__func__, (unsigned long long)req->pr_entry_nr);
nilfs_palloc_group_desc_add_entries(inode, group, desc, 1);
#include <linux/buffer_head.h>
#include <linux/mm.h>
#include <linux/backing-dev.h>
+#include <linux/gfp.h>
#include "nilfs.h"
#include "mdt.h"
#include "dat.h"
struct nilfs_btree_path *path,
int level, struct buffer_head *bh)
{
- int maxlevel, ret;
+ int maxlevel = 0, ret;
struct nilfs_btree_node *parent;
struct inode *dat = nilfs_bmap_get_dat(&btree->bt_bmap);
__u64 ptr;
#include <linux/buffer_head.h>
#include <linux/mpage.h>
#include <linux/hash.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include "nilfs.h"
#include "page.h"
*/
#include <linux/buffer_head.h>
+#include <linux/gfp.h>
#include <linux/mpage.h>
#include <linux/writeback.h>
#include <linux/uio.h>
#include <linux/fs.h>
#include <linux/wait.h>
#include <linux/smp_lock.h> /* lock_kernel(), unlock_kernel() */
+#include <linux/slab.h>
#include <linux/capability.h> /* capable() */
#include <linux/uaccess.h> /* copy_from_user(), copy_to_user() */
#include <linux/vmalloc.h>
long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
- void __user *argp = (void * __user *)arg;
+ void __user *argp = (void __user *)arg;
switch (cmd) {
case NILFS_IOCTL_CHANGE_CPMODE:
#include <linux/writeback.h>
#include <linux/backing-dev.h>
#include <linux/swap.h>
+#include <linux/slab.h>
#include "nilfs.h"
#include "segment.h"
#include "page.h"
#include <linux/list.h>
#include <linux/highmem.h>
#include <linux/pagevec.h>
+#include <linux/gfp.h>
#include "nilfs.h"
#include "page.h"
#include "mdt.h"
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/swap.h>
+#include <linux/slab.h>
#include <linux/crc32.h>
#include "nilfs.h"
#include "segment.h"
#include <linux/writeback.h>
#include <linux/crc32.h>
#include <linux/backing-dev.h>
+#include <linux/slab.h>
#include "page.h"
#include "segbuf.h"
int nilfs_wait_on_logs(struct list_head *logs)
{
struct nilfs_segment_buffer *segbuf;
- int err;
+ int err, ret = 0;
list_for_each_entry(segbuf, logs, sb_list) {
err = nilfs_segbuf_wait(segbuf);
- if (err)
- return err;
+ if (err && !ret)
+ ret = err;
}
- return 0;
+ return ret;
}
/*
#include <linux/kthread.h>
#include <linux/crc32.h>
#include <linux/pagevec.h>
+#include <linux/slab.h>
#include "nilfs.h"
#include "btnode.h"
#include "page.h"
if (mode != SC_LSEG_SR || sci->sc_stage.scnt < NILFS_ST_CPFILE)
break;
+ nilfs_clear_logs(&sci->sc_segbufs);
+
+ err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
+ if (unlikely(err))
+ return err;
+
if (sci->sc_stage.flags & NILFS_CF_SUFREED) {
err = nilfs_sufile_cancel_freev(nilfs->ns_sufile,
sci->sc_freesegs,
NULL);
WARN_ON(err); /* do not happen */
}
- nilfs_clear_logs(&sci->sc_segbufs);
-
- err = nilfs_segctor_extend_segments(sci, nilfs, nadd);
- if (unlikely(err))
- return err;
-
nadd = min_t(int, nadd << 1, SC_MAX_SEGDELTA);
sci->sc_stage = prev_stage;
}
list_splice_tail_init(&sci->sc_write_logs, &logs);
ret = nilfs_wait_on_logs(&logs);
- if (ret)
- nilfs_abort_logs(&logs, NULL, sci->sc_super_root, ret);
+ nilfs_abort_logs(&logs, NULL, sci->sc_super_root, ret ? : err);
list_splice_tail_init(&sci->sc_segbufs, &logs);
nilfs_cancel_segusage(&logs, nilfs->ns_sufile);
sb->s_export_op = &nilfs_export_ops;
sb->s_root = NULL;
sb->s_time_gran = 1;
+ sb->s_bdi = nilfs->ns_bdi;
err = load_nilfs(nilfs, sbi);
if (err)
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
+#include <linux/slab.h>
#include "sb.h"
/* the_nilfs struct */
#include <linux/dcache.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/srcu.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/writeback.h> /* for inode_lock */
config INOTIFY_USER
bool "Inotify support for userspace"
+ select ANON_INODES
select FSNOTIFY
default y
---help---
#include <linux/errno.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/buffer_head.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include "attrib.h"
#include "inode.h"
*/
#include <linux/buffer_head.h>
+#include <linux/slab.h>
#include "dir.h"
#include "aops.h"
*/
#include <linux/buffer_head.h>
+#include <linux/gfp.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
#include <linux/sched.h>
* Foundation,Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/slab.h>
+
#include "aops.h"
#include "collate.h"
#include "debug.h"
*/
#include <linux/buffer_head.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include "attrib.h"
#include <linux/dcache.h>
#include <linux/exportfs.h>
#include <linux/security.h>
+#include <linux/slab.h>
#include "attrib.h"
#include "debug.h"
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/string.h>
#define MLOG_MASK_PREFIX ML_INODE
#include "alloc.h"
#include "dlmglue.h"
#include "file.h"
+#include "inode.h"
+#include "journal.h"
#include "ocfs2_fs.h"
#include "xattr.h"
return acl;
}
+/*
+ * Helper function to set i_mode in memory and disk. Some call paths
+ * will not have di_bh or a journal handle to pass, in which case it
+ * will create it's own.
+ */
+static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head *di_bh,
+ handle_t *handle, umode_t new_mode)
+{
+ int ret, commit_handle = 0;
+ struct ocfs2_dinode *di;
+
+ if (di_bh == NULL) {
+ ret = ocfs2_read_inode_block(inode, &di_bh);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
+ } else
+ get_bh(di_bh);
+
+ if (handle == NULL) {
+ handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb),
+ OCFS2_INODE_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ mlog_errno(ret);
+ goto out_brelse;
+ }
+
+ commit_handle = 1;
+ }
+
+ di = (struct ocfs2_dinode *)di_bh->b_data;
+ ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out_commit;
+ }
+
+ inode->i_mode = new_mode;
+ di->i_mode = cpu_to_le16(inode->i_mode);
+
+ ocfs2_journal_dirty(handle, di_bh);
+
+out_commit:
+ if (commit_handle)
+ ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+out_brelse:
+ brelse(di_bh);
+out:
+ return ret;
+}
+
/*
* Set the access or default ACL of an inode.
*/
if (ret < 0)
return ret;
else {
- inode->i_mode = mode;
if (ret == 0)
acl = NULL;
+
+ ret = ocfs2_acl_set_mode(inode, di_bh,
+ handle, mode);
+ if (ret)
+ return ret;
+
}
}
break;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
struct posix_acl *acl = NULL;
int ret = 0;
+ mode_t mode;
if (!S_ISLNK(inode->i_mode)) {
if (osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) {
if (IS_ERR(acl))
return PTR_ERR(acl);
}
- if (!acl)
- inode->i_mode &= ~current_umask();
+ if (!acl) {
+ mode = inode->i_mode & ~current_umask();
+ ret = ocfs2_acl_set_mode(inode, di_bh, handle, mode);
+ if (ret) {
+ mlog_errno(ret);
+ goto cleanup;
+ }
+ }
}
if ((osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL) && acl) {
struct posix_acl *clone;
- mode_t mode;
if (S_ISDIR(inode->i_mode)) {
ret = ocfs2_set_acl(handle, inode, di_bh,
mode = inode->i_mode;
ret = posix_acl_create_masq(clone, &mode);
if (ret >= 0) {
- inode->i_mode = mode;
+ ret = ocfs2_acl_set_mode(inode, di_bh, handle, mode);
if (ret > 0) {
ret = ocfs2_set_acl(handle, inode,
di_bh, ACL_TYPE_ACCESS,
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <cluster/masklog.h>
struct buffer_head *bh)
{
int ret = 0;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *)bh->b_data;
mlog_entry_void();
get_bh(bh); /* for end_buffer_write_sync() */
bh->b_end_io = end_buffer_write_sync;
+ ocfs2_compute_meta_ecc(osb->sb, bh->b_data, &di->i_check);
submit_bh(WRITE, bh);
wait_on_buffer(bh);
#include <linux/crc32.h>
#include <linux/time.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include "heartbeat.h"
#include "tcp.h"
* Boston, MA 021110-1307, USA.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/configfs.h>
* and if they're the last, they fire off the decision.
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/reboot.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/sysctl.h>
BUG_ON(!lksb);
/* only updates if this node masters the lockres */
+ spin_lock(&res->spinlock);
if (res->owner == dlm->node_num) {
-
- spin_lock(&res->spinlock);
/* check the lksb flags for the direction */
if (lksb->flags & DLM_LKSB_GET_LVB) {
mlog(0, "getting lvb from lockres for %s node\n",
* here. In the future we might want to clear it at the time
* the put is actually done.
*/
- spin_unlock(&res->spinlock);
}
+ spin_unlock(&res->spinlock);
/* reset any lvb flags on the lksb */
lksb->flags &= ~(DLM_LKSB_PUT_LVB|DLM_LKSB_GET_LVB);
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/sysctl.h>
ok:
spin_unlock(&res->spinlock);
}
- spin_unlock(&dlm->spinlock);
// mlog(0, "woo! got an assert_master from node %u!\n",
// assert->node_idx);
/* master is known, detach if not already detached.
* ensures that only one assert_master call will happen
* on this mle. */
- spin_lock(&dlm->spinlock);
spin_lock(&dlm->master_lock);
rr = atomic_read(&mle->mle_refs.refcount);
__dlm_put_mle(mle);
}
spin_unlock(&dlm->master_lock);
- spin_unlock(&dlm->spinlock);
} else if (res) {
if (res->owner != assert->node_idx) {
mlog(0, "assert_master from %u, but current "
res->owner, namelen, name);
}
}
+ spin_unlock(&dlm->spinlock);
done:
ret = 0;
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/sysctl.h>
* O_RDONLY -> PRMODE level
* O_WRONLY -> EXMODE level
*
- * O_NONBLOCK -> LKM_NOQUEUE
+ * O_NONBLOCK -> NOQUEUE
*/
static int dlmfs_decode_open_flags(int open_flags,
int *level,
int *flags)
{
if (open_flags & (O_WRONLY|O_RDWR))
- *level = LKM_EXMODE;
+ *level = DLM_LOCK_EX;
else
- *level = LKM_PRMODE;
+ *level = DLM_LOCK_PR;
*flags = 0;
if (open_flags & O_NONBLOCK)
- *flags |= LKM_NOQUEUE;
+ *flags |= DLM_LKF_NOQUEUE;
return 0;
}
* to be able userspace to be able to distinguish a
* valid lock request from one that simply couldn't be
* granted. */
- if (flags & LKM_NOQUEUE && status == -EAGAIN)
+ if (flags & DLM_LKF_NOQUEUE && status == -EAGAIN)
status = -ETXTBSY;
kfree(fp);
goto bail;
status = 0;
if (fp) {
level = fp->fp_lock_level;
- if (level != LKM_IVMODE)
+ if (level != DLM_LOCK_IV)
user_dlm_cluster_unlock(&ip->ip_lockres, level);
kfree(fp);
if ((count + *ppos) > i_size_read(inode))
readlen = i_size_read(inode) - *ppos;
else
- readlen = count - *ppos;
+ readlen = count;
lvb_buf = kmalloc(readlen, GFP_NOFS);
if (!lvb_buf)
#include <linux/fs.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fiemap.h>
if (why == RESTART_META) {
mlog(0, "restarting function.\n");
restart_func = 1;
+ status = 0;
} else {
BUG_ON(why != RESTART_TRANS);
/* communicate with ocfs2_dio_end_io */
ocfs2_iocb_set_rw_locked(iocb, rw_level);
- if (direct_io) {
- ret = generic_segment_checks(iov, &nr_segs, &ocount,
- VERIFY_READ);
- if (ret)
- goto out_dio;
+ ret = generic_segment_checks(iov, &nr_segs, &ocount,
+ VERIFY_READ);
+ if (ret)
+ goto out_dio;
- count = ocount;
- ret = generic_write_checks(file, ppos, &count,
- S_ISBLK(inode->i_mode));
- if (ret)
- goto out_dio;
+ count = ocount;
+ ret = generic_write_checks(file, ppos, &count,
+ S_ISBLK(inode->i_mode));
+ if (ret)
+ goto out_dio;
+ if (direct_io) {
written = generic_file_direct_write(iocb, iov, &nr_segs, *ppos,
ppos, count, ocount);
if (written < 0) {
goto out_dio;
}
} else {
- written = __generic_file_aio_write(iocb, iov, nr_segs, ppos);
+ current->backing_dev_info = file->f_mapping->backing_dev_info;
+ written = generic_file_buffered_write(iocb, iov, nr_segs, *ppos,
+ ppos, count, 0);
+ current->backing_dev_info = NULL;
}
out_dio:
if (ret < 0)
written = ret;
- if (!ret && (old_size != i_size_read(inode) ||
- old_clusters != OCFS2_I(inode)->ip_clusters ||
- has_refcount)) {
+ if (!ret && ((old_size != i_size_read(inode)) ||
+ (old_clusters != OCFS2_I(inode)->ip_clusters) ||
+ has_refcount)) {
ret = jbd2_journal_force_commit(osb->journal->j_journal);
if (ret < 0)
written = ret;
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#define MLOG_MASK_PREFIX ML_SUPER
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
if (IS_ERR(handle)) {
status = PTR_ERR(handle);
+ handle = NULL;
mlog_errno(status);
goto out;
}
goto bail_unlock;
}
- status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode,
- orphan_dir_bh);
- if (status < 0) {
- mlog_errno(status);
- goto bail_commit;
+ if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) {
+ status = ocfs2_orphan_del(osb, handle, orphan_dir_inode, inode,
+ orphan_dir_bh);
+ if (status < 0) {
+ mlog_errno(status);
+ goto bail_commit;
+ }
}
/* set the inodes dtime */
static int ocfs2_wipe_inode(struct inode *inode,
struct buffer_head *di_bh)
{
- int status, orphaned_slot;
+ int status, orphaned_slot = -1;
struct inode *orphan_dir_inode = NULL;
struct buffer_head *orphan_dir_bh = NULL;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
- struct ocfs2_dinode *di;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *) di_bh->b_data;
- di = (struct ocfs2_dinode *) di_bh->b_data;
- orphaned_slot = le16_to_cpu(di->i_orphaned_slot);
+ if (!(OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) {
+ orphaned_slot = le16_to_cpu(di->i_orphaned_slot);
- status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
- if (status)
- return status;
+ status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
+ if (status)
+ return status;
- orphan_dir_inode = ocfs2_get_system_file_inode(osb,
- ORPHAN_DIR_SYSTEM_INODE,
- orphaned_slot);
- if (!orphan_dir_inode) {
- status = -EEXIST;
- mlog_errno(status);
- goto bail;
- }
+ orphan_dir_inode = ocfs2_get_system_file_inode(osb,
+ ORPHAN_DIR_SYSTEM_INODE,
+ orphaned_slot);
+ if (!orphan_dir_inode) {
+ status = -EEXIST;
+ mlog_errno(status);
+ goto bail;
+ }
- /* Lock the orphan dir. The lock will be held for the entire
- * delete_inode operation. We do this now to avoid races with
- * recovery completion on other nodes. */
- mutex_lock(&orphan_dir_inode->i_mutex);
- status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1);
- if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
+ /* Lock the orphan dir. The lock will be held for the entire
+ * delete_inode operation. We do this now to avoid races with
+ * recovery completion on other nodes. */
+ mutex_lock(&orphan_dir_inode->i_mutex);
+ status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1);
+ if (status < 0) {
+ mutex_unlock(&orphan_dir_inode->i_mutex);
- mlog_errno(status);
- goto bail;
+ mlog_errno(status);
+ goto bail;
+ }
}
/* we do this while holding the orphan dir lock because we
mlog_errno(status);
bail_unlock_dir:
+ if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)
+ return status;
+
ocfs2_inode_unlock(orphan_dir_inode, 1);
mutex_unlock(&orphan_dir_inode->i_mutex);
brelse(orphan_dir_bh);
/* Do some basic inode verification... */
di = (struct ocfs2_dinode *) di_bh->b_data;
- if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL))) {
+ if (!(di->i_flags & cpu_to_le32(OCFS2_ORPHANED_FL)) &&
+ !(oi->ip_flags & OCFS2_INODE_SKIP_ORPHAN_DIR)) {
+ /*
+ * Inodes in the orphan dir must have ORPHANED_FL. The only
+ * inodes that come back out of the orphan dir are reflink
+ * targets. A reflink target may be moved out of the orphan
+ * dir between the time we scan the directory and the time we
+ * process it. This would lead to HAS_REFCOUNT_FL being set but
+ * ORPHANED_FL not.
+ */
+ if (di->i_dyn_features & cpu_to_le16(OCFS2_HAS_REFCOUNT_FL)) {
+ mlog(0, "Reflinked inode %llu is no longer orphaned. "
+ "it shouldn't be deleted\n",
+ (unsigned long long)oi->ip_blkno);
+ goto bail;
+ }
+
/* for lack of a better error? */
status = -EEXIST;
mlog(ML_ERROR,
#define OCFS2_INODE_MAYBE_ORPHANED 0x00000020
/* Does someone have the file open O_DIRECT */
#define OCFS2_INODE_OPEN_DIRECT 0x00000040
+/* Tell the inode wipe code it's not in orphan dir */
+#define OCFS2_INODE_SKIP_ORPHAN_DIR 0x00000080
static inline struct ocfs2_inode_info *OCFS2_I(struct inode *inode)
{
(unsigned long long)la_start_blk,
(unsigned long long)blkno);
- status = ocfs2_free_clusters(handle, main_bm_inode,
- main_bm_bh, blkno, count);
+ status = ocfs2_release_clusters(handle,
+ main_bm_inode,
+ main_bm_bh, blkno,
+ count);
if (status < 0) {
mlog_errno(status);
goto bail;
}
retry_enospc:
- (*ac)->ac_bits_wanted = osb->local_alloc_bits;
-
+ (*ac)->ac_bits_wanted = osb->local_alloc_default_bits;
status = ocfs2_reserve_cluster_bitmap_bits(osb, *ac);
if (status == -ENOSPC) {
if (ocfs2_recalc_la_window(osb, OCFS2_LA_EVENT_ENOSPC) ==
OCFS2_LA_DISABLED)
goto bail;
+ ac->ac_bits_wanted = osb->local_alloc_default_bits;
status = ocfs2_claim_clusters(osb, handle, ac,
osb->local_alloc_bits,
&cluster_off,
if (!(fl->fl_flags & FL_POSIX))
return -ENOLCK;
- if (__mandatory_lock(inode))
+ if (__mandatory_lock(inode) && fl->fl_type != F_UNLCK)
return -ENOLCK;
return ocfs2_plock(osb->cconn, OCFS2_I(inode)->ip_blkno, file, cmd, fl);
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/uio.h>
static int ocfs2_orphan_add(struct ocfs2_super *osb,
handle_t *handle,
struct inode *inode,
- struct ocfs2_dinode *fe,
+ struct buffer_head *fe_bh,
char *name,
struct ocfs2_dir_lookup_result *lookup,
struct inode *orphan_dir_inode);
}
}
- status = ocfs2_add_entry(handle, dentry, inode,
- OCFS2_I(inode)->ip_blkno, parent_fe_bh,
- &lookup);
- if (status < 0) {
+ /*
+ * Do this before adding the entry to the directory. We add
+ * also set d_op after success so that ->d_iput() will cleanup
+ * the dentry lock even if ocfs2_add_entry() fails below.
+ */
+ status = ocfs2_dentry_attach_lock(dentry, inode,
+ OCFS2_I(dir)->ip_blkno);
+ if (status) {
mlog_errno(status);
goto leave;
}
+ dentry->d_op = &ocfs2_dentry_ops;
- status = ocfs2_dentry_attach_lock(dentry, inode,
- OCFS2_I(dir)->ip_blkno);
- if (status) {
+ status = ocfs2_add_entry(handle, dentry, inode,
+ OCFS2_I(inode)->ip_blkno, parent_fe_bh,
+ &lookup);
+ if (status < 0) {
mlog_errno(status);
goto leave;
}
insert_inode_hash(inode);
- dentry->d_op = &ocfs2_dentry_ops;
d_instantiate(dentry, inode);
status = 0;
leave:
ocfs2_free_dir_lookup_result(&lookup);
- if ((status < 0) && inode) {
- clear_nlink(inode);
- iput(inode);
- }
-
if (inode_ac)
ocfs2_free_alloc_context(inode_ac);
if (meta_ac)
ocfs2_free_alloc_context(meta_ac);
+ /*
+ * We should call iput after the i_mutex of the bitmap been
+ * unlocked in ocfs2_free_alloc_context, or the
+ * ocfs2_delete_inode will mutex_lock again.
+ */
+ if ((status < 0) && inode) {
+ OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR;
+ clear_nlink(inode);
+ iput(inode);
+ }
+
mlog_exit(status);
return status;
fe = (struct ocfs2_dinode *) fe_bh->b_data;
if (inode_is_unlinkable(inode)) {
- status = ocfs2_orphan_add(osb, handle, inode, fe, orphan_name,
+ status = ocfs2_orphan_add(osb, handle, inode, fe_bh, orphan_name,
&orphan_insert, orphan_dir);
if (status < 0) {
mlog_errno(status);
if (S_ISDIR(new_inode->i_mode) ||
(ocfs2_read_links_count(newfe) == 1)) {
status = ocfs2_orphan_add(osb, handle, new_inode,
- newfe, orphan_name,
+ newfe_bh, orphan_name,
&orphan_insert, orphan_dir);
if (status < 0) {
mlog_errno(status);
}
}
- status = ocfs2_add_entry(handle, dentry, inode,
- le64_to_cpu(fe->i_blkno), parent_fe_bh,
- &lookup);
- if (status < 0) {
+ /*
+ * Do this before adding the entry to the directory. We add
+ * also set d_op after success so that ->d_iput() will cleanup
+ * the dentry lock even if ocfs2_add_entry() fails below.
+ */
+ status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno);
+ if (status) {
mlog_errno(status);
goto bail;
}
+ dentry->d_op = &ocfs2_dentry_ops;
- status = ocfs2_dentry_attach_lock(dentry, inode, OCFS2_I(dir)->ip_blkno);
- if (status) {
+ status = ocfs2_add_entry(handle, dentry, inode,
+ le64_to_cpu(fe->i_blkno), parent_fe_bh,
+ &lookup);
+ if (status < 0) {
mlog_errno(status);
goto bail;
}
insert_inode_hash(inode);
- dentry->d_op = &ocfs2_dentry_ops;
d_instantiate(dentry, inode);
bail:
if (status < 0 && did_quota)
if (xattr_ac)
ocfs2_free_alloc_context(xattr_ac);
if ((status < 0) && inode) {
+ OCFS2_I(inode)->ip_flags |= OCFS2_INODE_SKIP_ORPHAN_DIR;
clear_nlink(inode);
iput(inode);
}
static int ocfs2_orphan_add(struct ocfs2_super *osb,
handle_t *handle,
struct inode *inode,
- struct ocfs2_dinode *fe,
+ struct buffer_head *fe_bh,
char *name,
struct ocfs2_dir_lookup_result *lookup,
struct inode *orphan_dir_inode)
struct buffer_head *orphan_dir_bh = NULL;
int status = 0;
struct ocfs2_dinode *orphan_fe;
+ struct ocfs2_dinode *fe = (struct ocfs2_dinode *) fe_bh->b_data;
mlog_entry("(inode->i_ino = %lu)\n", inode->i_ino);
goto leave;
}
+ /*
+ * We're going to journal the change of i_flags and i_orphaned_slot.
+ * It's safe anyway, though some callers may duplicate the journaling.
+ * Journaling within the func just make the logic look more
+ * straightforward.
+ */
+ status = ocfs2_journal_access_di(handle,
+ INODE_CACHE(inode),
+ fe_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto leave;
+ }
+
le32_add_cpu(&fe->i_flags, OCFS2_ORPHANED_FL);
+ OCFS2_I(inode)->ip_flags &= ~OCFS2_INODE_SKIP_ORPHAN_DIR;
/* Record which orphan dir our inode now resides
* in. delete_inode will use this to determine which orphan
* dir to lock. */
fe->i_orphaned_slot = cpu_to_le16(osb->slot_num);
+ ocfs2_journal_dirty(handle, fe_bh);
+
mlog(0, "Inode %llu orphaned in slot %d\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno, osb->slot_num);
}
di = (struct ocfs2_dinode *)new_di_bh->b_data;
- status = ocfs2_orphan_add(osb, handle, inode, di, orphan_name,
+ status = ocfs2_orphan_add(osb, handle, inode, new_di_bh, orphan_name,
&orphan_insert, orphan_dir);
if (status < 0) {
mlog_errno(status);
return megs << (20 - OCFS2_SB(sb)->s_clustersize_bits);
}
-#define ocfs2_set_bit ext2_set_bit
-#define ocfs2_clear_bit ext2_clear_bit
+static inline void _ocfs2_set_bit(unsigned int bit, unsigned long *bitmap)
+{
+ ext2_set_bit(bit, bitmap);
+}
+#define ocfs2_set_bit(bit, addr) _ocfs2_set_bit((bit), (unsigned long *)(addr))
+
+static inline void _ocfs2_clear_bit(unsigned int bit, unsigned long *bitmap)
+{
+ ext2_clear_bit(bit, bitmap);
+}
+#define ocfs2_clear_bit(bit, addr) _ocfs2_clear_bit((bit), (unsigned long *)(addr))
+
#define ocfs2_test_bit ext2_test_bit
#define ocfs2_find_next_zero_bit ext2_find_next_zero_bit
#define ocfs2_find_next_bit ext2_find_next_bit
*/
#include <linux/spinlock.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/quota.h>
#include <linux/quotaops.h>
#include <linux/dqblk_qtree.h>
*/
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/quota.h>
#include <linux/quotaops.h>
#include <linux/module.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
-#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/writeback.h>
#include <linux/pagevec.h>
OCFS2_I(t_inode)->ip_dyn_features = OCFS2_I(s_inode)->ip_dyn_features;
spin_unlock(&OCFS2_I(t_inode)->ip_lock);
i_size_write(t_inode, size);
+ t_inode->i_blocks = s_inode->i_blocks;
di->i_xattr_inline_size = s_di->i_xattr_inline_size;
di->i_clusters = s_di->i_clusters;
di->i_attr = s_di->i_attr;
if (preserve) {
+ t_inode->i_uid = s_inode->i_uid;
+ t_inode->i_gid = s_inode->i_gid;
+ t_inode->i_mode = s_inode->i_mode;
di->i_uid = s_di->i_uid;
di->i_gid = s_di->i_gid;
di->i_mode = s_di->i_mode;
#include <linux/kernel.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <linux/module.h>
/* Needed for AOP_TRUNCATED_PAGE in mlog_errno() */
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/reboot.h>
#include <asm/uaccess.h>
struct buffer_head *group_bh,
unsigned int bit_off,
unsigned int num_bits);
-static inline int ocfs2_block_group_clear_bits(handle_t *handle,
- struct inode *alloc_inode,
- struct ocfs2_group_desc *bg,
- struct buffer_head *group_bh,
- unsigned int bit_off,
- unsigned int num_bits);
-
static int ocfs2_relink_block_group(handle_t *handle,
struct inode *alloc_inode,
struct buffer_head *fe_bh,
#define do_error(fmt, ...) \
do{ \
- if (clean_error) \
+ if (resize) \
mlog(ML_ERROR, fmt "\n", ##__VA_ARGS__); \
else \
ocfs2_error(sb, fmt, ##__VA_ARGS__); \
static int ocfs2_validate_gd_self(struct super_block *sb,
struct buffer_head *bh,
- int clean_error)
+ int resize)
{
struct ocfs2_group_desc *gd = (struct ocfs2_group_desc *)bh->b_data;
static int ocfs2_validate_gd_parent(struct super_block *sb,
struct ocfs2_dinode *di,
struct buffer_head *bh,
- int clean_error)
+ int resize)
{
unsigned int max_bits;
struct ocfs2_group_desc *gd = (struct ocfs2_group_desc *)bh->b_data;
return -EINVAL;
}
- if (le16_to_cpu(gd->bg_chain) >=
- le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) {
+ /* In resize, we may meet the case bg_chain == cl_next_free_rec. */
+ if ((le16_to_cpu(gd->bg_chain) >
+ le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) ||
+ ((le16_to_cpu(gd->bg_chain) ==
+ le16_to_cpu(di->id2.i_chain.cl_next_free_rec)) && !resize)) {
do_error("Group descriptor #%llu has bad chain %u",
(unsigned long long)bh->b_blocknr,
le16_to_cpu(gd->bg_chain));
bits_wanted, cluster_start, num_clusters);
}
-static inline int ocfs2_block_group_clear_bits(handle_t *handle,
- struct inode *alloc_inode,
- struct ocfs2_group_desc *bg,
- struct buffer_head *group_bh,
- unsigned int bit_off,
- unsigned int num_bits)
+static int ocfs2_block_group_clear_bits(handle_t *handle,
+ struct inode *alloc_inode,
+ struct ocfs2_group_desc *bg,
+ struct buffer_head *group_bh,
+ unsigned int bit_off,
+ unsigned int num_bits,
+ void (*undo_fn)(unsigned int bit,
+ unsigned long *bmap))
{
int status;
unsigned int tmp;
- int journal_type = OCFS2_JOURNAL_ACCESS_WRITE;
struct ocfs2_group_desc *undo_bg = NULL;
- int cluster_bitmap = 0;
mlog_entry_void();
mlog(0, "off = %u, num = %u\n", bit_off, num_bits);
- if (ocfs2_is_cluster_bitmap(alloc_inode))
- journal_type = OCFS2_JOURNAL_ACCESS_UNDO;
-
+ BUG_ON(undo_fn && !ocfs2_is_cluster_bitmap(alloc_inode));
status = ocfs2_journal_access_gd(handle, INODE_CACHE(alloc_inode),
- group_bh, journal_type);
+ group_bh,
+ undo_fn ?
+ OCFS2_JOURNAL_ACCESS_UNDO :
+ OCFS2_JOURNAL_ACCESS_WRITE);
if (status < 0) {
mlog_errno(status);
goto bail;
}
- if (ocfs2_is_cluster_bitmap(alloc_inode))
- cluster_bitmap = 1;
-
- if (cluster_bitmap) {
+ if (undo_fn) {
jbd_lock_bh_state(group_bh);
undo_bg = (struct ocfs2_group_desc *)
bh2jh(group_bh)->b_committed_data;
while(tmp--) {
ocfs2_clear_bit((bit_off + tmp),
(unsigned long *) bg->bg_bitmap);
- if (cluster_bitmap)
- ocfs2_set_bit(bit_off + tmp,
- (unsigned long *) undo_bg->bg_bitmap);
+ if (undo_fn)
+ undo_fn(bit_off + tmp,
+ (unsigned long *) undo_bg->bg_bitmap);
}
le16_add_cpu(&bg->bg_free_bits_count, num_bits);
- if (cluster_bitmap)
+ if (undo_fn)
jbd_unlock_bh_state(group_bh);
status = ocfs2_journal_dirty(handle, group_bh);
/*
* expects the suballoc inode to already be locked.
*/
-int ocfs2_free_suballoc_bits(handle_t *handle,
- struct inode *alloc_inode,
- struct buffer_head *alloc_bh,
- unsigned int start_bit,
- u64 bg_blkno,
- unsigned int count)
+static int _ocfs2_free_suballoc_bits(handle_t *handle,
+ struct inode *alloc_inode,
+ struct buffer_head *alloc_bh,
+ unsigned int start_bit,
+ u64 bg_blkno,
+ unsigned int count,
+ void (*undo_fn)(unsigned int bit,
+ unsigned long *bitmap))
{
int status = 0;
u32 tmp_used;
status = ocfs2_block_group_clear_bits(handle, alloc_inode,
group, group_bh,
- start_bit, count);
+ start_bit, count, undo_fn);
if (status < 0) {
mlog_errno(status);
goto bail;
return status;
}
+int ocfs2_free_suballoc_bits(handle_t *handle,
+ struct inode *alloc_inode,
+ struct buffer_head *alloc_bh,
+ unsigned int start_bit,
+ u64 bg_blkno,
+ unsigned int count)
+{
+ return _ocfs2_free_suballoc_bits(handle, alloc_inode, alloc_bh,
+ start_bit, bg_blkno, count, NULL);
+}
+
int ocfs2_free_dinode(handle_t *handle,
struct inode *inode_alloc_inode,
struct buffer_head *inode_alloc_bh,
inode_alloc_bh, bit, bg_blkno, 1);
}
-int ocfs2_free_clusters(handle_t *handle,
- struct inode *bitmap_inode,
- struct buffer_head *bitmap_bh,
- u64 start_blk,
- unsigned int num_clusters)
+static int _ocfs2_free_clusters(handle_t *handle,
+ struct inode *bitmap_inode,
+ struct buffer_head *bitmap_bh,
+ u64 start_blk,
+ unsigned int num_clusters,
+ void (*undo_fn)(unsigned int bit,
+ unsigned long *bitmap))
{
int status;
u16 bg_start_bit;
mlog(0, "bg_blkno = %llu, bg_start_bit = %u\n",
(unsigned long long)bg_blkno, bg_start_bit);
- status = ocfs2_free_suballoc_bits(handle, bitmap_inode, bitmap_bh,
- bg_start_bit, bg_blkno,
- num_clusters);
+ status = _ocfs2_free_suballoc_bits(handle, bitmap_inode, bitmap_bh,
+ bg_start_bit, bg_blkno,
+ num_clusters, undo_fn);
if (status < 0) {
mlog_errno(status);
goto out;
return status;
}
+int ocfs2_free_clusters(handle_t *handle,
+ struct inode *bitmap_inode,
+ struct buffer_head *bitmap_bh,
+ u64 start_blk,
+ unsigned int num_clusters)
+{
+ return _ocfs2_free_clusters(handle, bitmap_inode, bitmap_bh,
+ start_blk, num_clusters,
+ _ocfs2_set_bit);
+}
+
+/*
+ * Give never-used clusters back to the global bitmap. We don't need
+ * to protect these bits in the undo buffer.
+ */
+int ocfs2_release_clusters(handle_t *handle,
+ struct inode *bitmap_inode,
+ struct buffer_head *bitmap_bh,
+ u64 start_blk,
+ unsigned int num_clusters)
+{
+ return _ocfs2_free_clusters(handle, bitmap_inode, bitmap_bh,
+ start_blk, num_clusters,
+ _ocfs2_clear_bit);
+}
+
static inline void ocfs2_debug_bg(struct ocfs2_group_desc *bg)
{
printk("Block Group:\n");
struct buffer_head *bitmap_bh,
u64 start_blk,
unsigned int num_clusters);
+int ocfs2_release_clusters(handle_t *handle,
+ struct inode *bitmap_inode,
+ struct buffer_head *bitmap_bh,
+ u64 start_blk,
+ unsigned int num_clusters);
static inline u64 ocfs2_which_suballoc_group(u64 block, unsigned int bit)
{
#include <linux/fs.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/highmem.h>
#define MLOG_MASK_PREFIX ML_INODE
/* Now tell xh->xh_entries about it */
for (i = 0; i < count; i++) {
offset = le16_to_cpu(xh->xh_entries[i].xe_name_offset);
- if (offset < namevalue_offset)
+ if (offset <= namevalue_offset)
le16_add_cpu(&xh->xh_entries[i].xe_name_offset,
namevalue_size);
}
int indexed)
{
int ret;
- struct ocfs2_alloc_context *meta_ac;
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
- struct ocfs2_xattr_set_ctxt ctxt = {
- .meta_ac = meta_ac,
- };
+ struct ocfs2_xattr_set_ctxt ctxt;
- ret = ocfs2_reserve_new_metadata_blocks(osb, 1, &meta_ac);
+ memset(&ctxt, 0, sizeof(ctxt));
+ ret = ocfs2_reserve_new_metadata_blocks(osb, 1, &ctxt.meta_ac);
if (ret < 0) {
mlog_errno(ret);
return ret;
ocfs2_commit_trans(osb, ctxt.handle);
out:
- ocfs2_free_alloc_context(meta_ac);
+ ocfs2_free_alloc_context(ctxt.meta_ac);
return ret;
}
#include <linux/version.h>
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/vfs.h>
#include <linux/parser.h>
#include <linux/fdtable.h>
#include <linux/fsnotify.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/namei.h>
#include <linux/backing-dev.h>
#include <linux/mount.h>
#include <linux/vfs.h>
#include <linux/fcntl.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/fs.h>
#include <linux/personality.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/kmod.h>
#include <linux/ctype.h>
#include <linux/genhd.h>
************************************************************/
#include <linux/crc32.h>
#include <linux/math64.h>
+#include <linux/slab.h>
#include "check.h"
#include "efi.h"
*/
#include <asm/unaligned.h>
-#define SYS_IND(p) (get_unaligned(&p->sys_ind))
-#define NR_SECTS(p) ({ __le32 __a = get_unaligned(&p->nr_sects); \
- le32_to_cpu(__a); \
- })
+#define SYS_IND(p) get_unaligned(&p->sys_ind)
-#define START_SECT(p) ({ __le32 __a = get_unaligned(&p->start_sect); \
- le32_to_cpu(__a); \
- })
+static inline sector_t nr_sects(struct partition *p)
+{
+ return (sector_t)get_unaligned_le32(&p->nr_sects);
+}
+
+static inline sector_t start_sect(struct partition *p)
+{
+ return (sector_t)get_unaligned_le32(&p->start_sect);
+}
static inline int is_extended_partition(struct partition *p)
{
static void
parse_extended(struct parsed_partitions *state, struct block_device *bdev,
- u32 first_sector, u32 first_size)
+ sector_t first_sector, sector_t first_size)
{
struct partition *p;
Sector sect;
unsigned char *data;
- u32 this_sector, this_size;
- int sector_size = bdev_logical_block_size(bdev) / 512;
+ sector_t this_sector, this_size;
+ sector_t sector_size = bdev_logical_block_size(bdev) / 512;
int loopct = 0; /* number of links followed
without finding a data partition */
int i;
* First process the data partition(s)
*/
for (i=0; i<4; i++, p++) {
- u32 offs, size, next;
- if (!NR_SECTS(p) || is_extended_partition(p))
+ sector_t offs, size, next;
+ if (!nr_sects(p) || is_extended_partition(p))
continue;
/* Check the 3rd and 4th entries -
these sometimes contain random garbage */
- offs = START_SECT(p)*sector_size;
- size = NR_SECTS(p)*sector_size;
+ offs = start_sect(p)*sector_size;
+ size = nr_sects(p)*sector_size;
next = this_sector + offs;
if (i >= 2) {
if (offs + size > this_size)
*/
p -= 4;
for (i=0; i<4; i++, p++)
- if (NR_SECTS(p) && is_extended_partition(p))
+ if (nr_sects(p) && is_extended_partition(p))
break;
if (i == 4)
goto done; /* nothing left to do */
- this_sector = first_sector + START_SECT(p) * sector_size;
- this_size = NR_SECTS(p) * sector_size;
+ this_sector = first_sector + start_sect(p) * sector_size;
+ this_size = nr_sects(p) * sector_size;
put_dev_sector(sect);
}
done:
static void
parse_solaris_x86(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin)
+ sector_t offset, sector_t size, int origin)
{
#ifdef CONFIG_SOLARIS_X86_PARTITION
Sector sect;
*/
static void
parse_bsd(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin, char *flavour,
+ sector_t offset, sector_t size, int origin, char *flavour,
int max_partitions)
{
Sector sect;
if (le16_to_cpu(l->d_npartitions) < max_partitions)
max_partitions = le16_to_cpu(l->d_npartitions);
for (p = l->d_partitions; p - l->d_partitions < max_partitions; p++) {
- u32 bsd_start, bsd_size;
+ sector_t bsd_start, bsd_size;
if (state->next == state->limit)
break;
static void
parse_freebsd(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin)
+ sector_t offset, sector_t size, int origin)
{
#ifdef CONFIG_BSD_DISKLABEL
parse_bsd(state, bdev, offset, size, origin,
static void
parse_netbsd(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin)
+ sector_t offset, sector_t size, int origin)
{
#ifdef CONFIG_BSD_DISKLABEL
parse_bsd(state, bdev, offset, size, origin,
static void
parse_openbsd(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin)
+ sector_t offset, sector_t size, int origin)
{
#ifdef CONFIG_BSD_DISKLABEL
parse_bsd(state, bdev, offset, size, origin,
*/
static void
parse_unixware(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin)
+ sector_t offset, sector_t size, int origin)
{
#ifdef CONFIG_UNIXWARE_DISKLABEL
Sector sect;
if (p->s_label != UNIXWARE_FS_UNUSED)
put_partition(state, state->next++,
- START_SECT(p), NR_SECTS(p));
+ le32_to_cpu(p->start_sect),
+ le32_to_cpu(p->nr_sects));
p++;
}
put_dev_sector(sect);
*/
static void
parse_minix(struct parsed_partitions *state, struct block_device *bdev,
- u32 offset, u32 size, int origin)
+ sector_t offset, sector_t size, int origin)
{
#ifdef CONFIG_MINIX_SUBPARTITION
Sector sect;
/* add each partition in use */
if (SYS_IND(p) == MINIX_PARTITION)
put_partition(state, state->next++,
- START_SECT(p), NR_SECTS(p));
+ start_sect(p), nr_sects(p));
}
printk(" >\n");
}
static struct {
unsigned char id;
void (*parse)(struct parsed_partitions *, struct block_device *,
- u32, u32, int);
+ sector_t, sector_t, int);
} subtypes[] = {
{FREEBSD_PARTITION, parse_freebsd},
{NETBSD_PARTITION, parse_netbsd},
int msdos_partition(struct parsed_partitions *state, struct block_device *bdev)
{
- int sector_size = bdev_logical_block_size(bdev) / 512;
+ sector_t sector_size = bdev_logical_block_size(bdev) / 512;
Sector sect;
unsigned char *data;
struct partition *p;
state->next = 5;
for (slot = 1 ; slot <= 4 ; slot++, p++) {
- u32 start = START_SECT(p)*sector_size;
- u32 size = NR_SECTS(p)*sector_size;
+ sector_t start = start_sect(p)*sector_size;
+ sector_t size = nr_sects(p)*sector_size;
if (!size)
continue;
if (is_extended_partition(p)) {
- /* prevent someone doing mkfs or mkswap on an
- extended partition, but leave room for LILO */
- put_partition(state, slot, start, size == 1 ? 1 : 2);
+ /*
+ * prevent someone doing mkfs or mkswap on an
+ * extended partition, but leave room for LILO
+ * FIXME: this uses one logical sector for > 512b
+ * sector, although it may not be enough/proper.
+ */
+ sector_t n = 2;
+ n = min(size, max(sector_size, n));
+ put_partition(state, slot, start, n);
+
printk(" <");
parse_extended(state, bdev, start, size);
printk(" >");
unsigned char id = SYS_IND(p);
int n;
- if (!NR_SECTS(p))
+ if (!nr_sects(p))
continue;
for (n = 0; subtypes[n].parse && id != subtypes[n].id; n++)
if (!subtypes[n].parse)
continue;
- subtypes[n].parse(state, bdev, START_SECT(p)*sector_size,
- NR_SECTS(p)*sector_size, slot);
+ subtypes[n].parse(state, bdev, start_sect(p)*sector_size,
+ nr_sects(p)*sector_size, slot);
}
put_dev_sector(sect);
return 1;
#include <linux/hugetlb.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
-#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/signal.h>
#include <linux/highmem.h>
#include <linux/elf.h>
#include <linux/pid_namespace.h>
#include <linux/fs_struct.h>
+#include <linux/slab.h>
#include "internal.h"
/* NOTE:
unsigned long badness(struct task_struct *p, unsigned long uptime);
static int proc_oom_score(struct task_struct *task, char *buffer)
{
- unsigned long points;
+ unsigned long points = 0;
struct timespec uptime;
do_posix_clock_monotonic_gettime(&uptime);
read_lock(&tasklist_lock);
- points = badness(task->group_leader, uptime.tv_sec);
+ if (pid_alive(task))
+ points = badness(task, uptime.tv_sec);
read_unlock(&tasklist_lock);
return sprintf(buffer, "%lu\n", points);
}
*/
static const struct pid_entry tid_base_stuff[] = {
DIR("fd", S_IRUSR|S_IXUSR, proc_fd_inode_operations, proc_fd_operations),
- DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fd_operations),
+ DIR("fdinfo", S_IRUSR|S_IXUSR, proc_fdinfo_inode_operations, proc_fdinfo_operations),
REG("environ", S_IRUSR, proc_environ_operations),
INF("auxv", S_IRUSR, proc_pid_auxv),
ONE("status", S_IRUGO, proc_pid_status),
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/init.h>
#include <linux/idr.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <linux/sysctl.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/highmem.h>
#include <linux/bootmem.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/list.h>
}
read_unlock(&kclist_lock);
- if (m == NULL) {
+ if (&m->list == &kclist_head) {
if (clear_user(buffer, tsz))
return -EFAULT;
} else if (is_vmalloc_or_module_addr((void *)start)) {
#include <linux/mmzone.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
-#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/hugetlb.h>
#include <linux/string.h>
#include <linux/of.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/prom.h>
#include <asm/uaccess.h>
#include "internal.h"
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/cpumask.h>
#include <linux/fs.h>
-#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
#include <linux/highmem.h>
#include <linux/ptrace.h>
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/mempolicy.h>
#include <linux/swap.h>
memset(&mss, 0, sizeof mss);
mss.vma = vma;
+ /* mmap_sem is held in m_start */
if (vma->vm_mm && !is_vm_hugetlb_page(vma))
walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk);
};
struct pagemapread {
- u64 __user *out, *end;
+ int pos, len;
+ u64 *buffer;
};
#define PM_ENTRY_BYTES sizeof(u64)
static int add_to_pagemap(unsigned long addr, u64 pfn,
struct pagemapread *pm)
{
- if (put_user(pfn, pm->out))
- return -EFAULT;
- pm->out++;
- if (pm->out >= pm->end)
+ pm->buffer[pm->pos++] = pfn;
+ if (pm->pos >= pm->len)
return PM_END_OF_BUFFER;
return 0;
}
return pme;
}
-static int pagemap_hugetlb_range(pte_t *pte, unsigned long addr,
- unsigned long end, struct mm_walk *walk)
+/* This function walks within one hugetlb entry in the single call */
+static int pagemap_hugetlb_range(pte_t *pte, unsigned long hmask,
+ unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
{
- struct vm_area_struct *vma;
struct pagemapread *pm = walk->private;
- struct hstate *hs = NULL;
int err = 0;
+ u64 pfn;
- vma = find_vma(walk->mm, addr);
- if (vma)
- hs = hstate_vma(vma);
for (; addr != end; addr += PAGE_SIZE) {
- u64 pfn = PM_NOT_PRESENT;
-
- if (vma && (addr >= vma->vm_end)) {
- vma = find_vma(walk->mm, addr);
- if (vma)
- hs = hstate_vma(vma);
- }
-
- if (vma && (vma->vm_start <= addr) && is_vm_hugetlb_page(vma)) {
- /* calculate pfn of the "raw" page in the hugepage. */
- int offset = (addr & ~huge_page_mask(hs)) >> PAGE_SHIFT;
- pfn = huge_pte_to_pagemap_entry(*pte, offset);
- }
+ int offset = (addr & ~hmask) >> PAGE_SHIFT;
+ pfn = huge_pte_to_pagemap_entry(*pte, offset);
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
* determine which areas of memory are actually mapped and llseek to
* skip over unmapped regions.
*/
+#define PAGEMAP_WALK_SIZE (PMD_SIZE)
static ssize_t pagemap_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct task_struct *task = get_proc_task(file->f_path.dentry->d_inode);
- struct page **pages, *page;
- unsigned long uaddr, uend;
struct mm_struct *mm;
struct pagemapread pm;
- int pagecount;
int ret = -ESRCH;
struct mm_walk pagemap_walk = {};
unsigned long src;
unsigned long svpfn;
unsigned long start_vaddr;
unsigned long end_vaddr;
+ int copied = 0;
if (!task)
goto out;
if (!mm)
goto out_task;
-
- uaddr = (unsigned long)buf & PAGE_MASK;
- uend = (unsigned long)(buf + count);
- pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE;
- ret = 0;
- if (pagecount == 0)
- goto out_mm;
- pages = kcalloc(pagecount, sizeof(struct page *), GFP_KERNEL);
+ pm.len = PM_ENTRY_BYTES * (PAGEMAP_WALK_SIZE >> PAGE_SHIFT);
+ pm.buffer = kmalloc(pm.len, GFP_TEMPORARY);
ret = -ENOMEM;
- if (!pages)
+ if (!pm.buffer)
goto out_mm;
- down_read(¤t->mm->mmap_sem);
- ret = get_user_pages(current, current->mm, uaddr, pagecount,
- 1, 0, pages, NULL);
- up_read(¤t->mm->mmap_sem);
-
- if (ret < 0)
- goto out_free;
-
- if (ret != pagecount) {
- pagecount = ret;
- ret = -EFAULT;
- goto out_pages;
- }
-
- pm.out = (u64 __user *)buf;
- pm.end = (u64 __user *)(buf + count);
-
pagemap_walk.pmd_entry = pagemap_pte_range;
pagemap_walk.pte_hole = pagemap_pte_hole;
pagemap_walk.hugetlb_entry = pagemap_hugetlb_range;
* user buffer is tracked in "pm", and the walk
* will stop when we hit the end of the buffer.
*/
- ret = walk_page_range(start_vaddr, end_vaddr, &pagemap_walk);
- if (ret == PM_END_OF_BUFFER)
- ret = 0;
- /* don't need mmap_sem for these, but this looks cleaner */
- *ppos += (char __user *)pm.out - buf;
- if (!ret)
- ret = (char __user *)pm.out - buf;
-
-out_pages:
- for (; pagecount; pagecount--) {
- page = pages[pagecount-1];
- if (!PageReserved(page))
- SetPageDirty(page);
- page_cache_release(page);
+ ret = 0;
+ while (count && (start_vaddr < end_vaddr)) {
+ int len;
+ unsigned long end;
+
+ pm.pos = 0;
+ end = start_vaddr + PAGEMAP_WALK_SIZE;
+ /* overflow ? */
+ if (end < start_vaddr || end > end_vaddr)
+ end = end_vaddr;
+ down_read(&mm->mmap_sem);
+ ret = walk_page_range(start_vaddr, end, &pagemap_walk);
+ up_read(&mm->mmap_sem);
+ start_vaddr = end;
+
+ len = min(count, PM_ENTRY_BYTES * pm.pos);
+ if (copy_to_user(buf, pm.buffer, len)) {
+ ret = -EFAULT;
+ goto out_free;
+ }
+ copied += len;
+ buf += len;
+ count -= len;
}
+ *ppos += copied;
+ if (!ret || ret == PM_END_OF_BUFFER)
+ ret = copied;
+
out_free:
- kfree(pages);
+ kfree(pm.buffer);
out_mm:
mmput(mm);
out_task:
#include <linux/fs_struct.h>
#include <linux/mount.h>
#include <linux/ptrace.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include "internal.h"
#include <linux/user.h>
#include <linux/elf.h>
#include <linux/elfcore.h>
+#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/bootmem.h>
#include <linux/init.h>
Note that this behavior is currently deprecated and may go away in
future. Please use notification via netlink socket instead.
+config QUOTA_DEBUG
+ bool "Additional quota sanity checks"
+ depends on QUOTA
+ default n
+ help
+ If you say Y here, quota subsystem will perform some additional
+ sanity checks of quota internal structures. If unsure, say N.
+
# Generic support for tree structured quota files. Selected when needed.
config QUOTA_TREE
tristate
#include <asm/uaccess.h>
-#define __DQUOT_PARANOIA
-
/*
* There are three quota SMP locks. dq_list_lock protects all lists with quotas
* and quota formats, dqstats structure containing statistics about the lists
if (!dquot)
return;
-#ifdef __DQUOT_PARANOIA
+#ifdef CONFIG_QUOTA_DEBUG
if (!atomic_read(&dquot->dq_count)) {
printk("VFS: dqput: trying to free free dquot\n");
printk("VFS: device %s, dquot of %s %d\n",
goto we_slept;
}
atomic_dec(&dquot->dq_count);
-#ifdef __DQUOT_PARANOIA
+#ifdef CONFIG_QUOTA_DEBUG
/* sanity check */
BUG_ON(!list_empty(&dquot->dq_free));
#endif
dquot = NULL;
goto out;
}
-#ifdef __DQUOT_PARANOIA
+#ifdef CONFIG_QUOTA_DEBUG
BUG_ON(!dquot->dq_sb); /* Has somebody invalidated entry under us? */
#endif
out:
static void add_dquot_ref(struct super_block *sb, int type)
{
struct inode *inode, *old_inode = NULL;
+#ifdef CONFIG_QUOTA_DEBUG
int reserved = 0;
+#endif
spin_lock(&inode_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE|I_NEW))
continue;
+#ifdef CONFIG_QUOTA_DEBUG
if (unlikely(inode_get_rsv_space(inode) > 0))
reserved = 1;
+#endif
if (!atomic_read(&inode->i_writecount))
continue;
if (!dqinit_needed(inode, type))
spin_unlock(&inode_lock);
iput(old_inode);
+#ifdef CONFIG_QUOTA_DEBUG
if (reserved) {
printk(KERN_WARNING "VFS (%s): Writes happened before quota"
" was turned on thus quota information is probably "
"inconsistent. Please run quotacheck(8).\n", sb->s_id);
}
+#endif
}
/*
inode->i_dquot[type] = NULL;
if (dquot) {
if (dqput_blocks(dquot)) {
-#ifdef __DQUOT_PARANOIA
+#ifdef CONFIG_QUOTA_DEBUG
if (atomic_read(&dquot->dq_count) != 1)
printk(KERN_WARNING "VFS: Adding dquot with dq_count %d to dispose list.\n", atomic_read(&dquot->dq_count));
#endif
if (di->dqb_valid & QIF_SPACE) {
dm->dqb_curspace = di->dqb_curspace - dm->dqb_rsvspace;
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BLIMITS) {
dm->dqb_bsoftlimit = qbtos(di->dqb_bsoftlimit);
dm->dqb_bhardlimit = qbtos(di->dqb_bhardlimit);
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_INODES) {
dm->dqb_curinodes = di->dqb_curinodes;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ILIMITS) {
dm->dqb_isoftlimit = di->dqb_isoftlimit;
dm->dqb_ihardlimit = di->dqb_ihardlimit;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BTIME) {
dm->dqb_btime = di->dqb_btime;
check_blim = 1;
- __set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ITIME) {
dm->dqb_itime = di->dqb_itime;
check_ilim = 1;
- __set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
+ set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
}
if (check_blim) {
#include <linux/kernel.h>
#include <linux/quotaops.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include <linux/pagevec.h>
#include <linux/mman.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "internal.h"
#include <linux/sched.h>
#include <linux/parser.h>
#include <linux/magic.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "internal.h"
init_sync_kiocb(&kiocb, filp);
kiocb.ki_pos = *ppos;
kiocb.ki_left = len;
+ kiocb.ki_nbytes = len;
for (;;) {
ret = filp->f_op->aio_read(&kiocb, &iov, 1, kiocb.ki_pos);
init_sync_kiocb(&kiocb, filp);
kiocb.ki_pos = *ppos;
kiocb.ki_left = len;
+ kiocb.ki_nbytes = len;
for (;;) {
ret = filp->f_op->aio_write(&kiocb, &iov, 1, kiocb.ki_pos);
#include <linux/reiserfs_fs.h>
#include <linux/stat.h>
#include <linux/buffer_head.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
extern const struct reiserfs_key MIN_KEY;
struct reiserfs_de_head *deh)
{
struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
- if (reiserfs_expose_privroot(dir->d_sb))
- return 0;
return (dir == dir->d_parent && privroot->d_inode &&
deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
}
**/
#include <linux/time.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/reiserfs_fs.h>
#include <linux/buffer_head.h>
#include <linux/smp_lock.h>
#include <linux/pagemap.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <linux/buffer_head.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <asm/system.h>
brelse(d_bh);
return 1;
}
+
+ if (bdev_read_only(sb->s_bdev)) {
+ reiserfs_warning(sb, "clm-2076",
+ "device is readonly, unable to replay log");
+ brelse(c_bh);
+ brelse(d_bh);
+ return -EROFS;
+ }
+
trans_id = get_desc_trans_id(desc);
/* now we know we've got a good transaction, and it was inside the valid time ranges */
log_blocks = kmalloc(get_desc_trans_len(desc) *
goto start_log_replay;
}
- if (continue_replay && bdev_read_only(sb->s_bdev)) {
- reiserfs_warning(sb, "clm-2076",
- "device is readonly, unable to replay log");
- return -1;
- }
-
/* ok, there are transactions that need to be replayed. start with the first log block, find
** all the valid transactions, and pick out the oldest.
*/
#include <linux/time.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <linux/reiserfs_fs.h>
#include <linux/reiserfs_acl.h>
#include <linux/reiserfs_xattr.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/time.h>
#include <asm/uaccess.h>
save_mount_options(s, data);
sbi = kzalloc(sizeof(struct reiserfs_sb_info), GFP_KERNEL);
- if (!sbi) {
- errval = -ENOMEM;
- goto error_alloc;
- }
+ if (!sbi)
+ return -ENOMEM;
s->s_fs_info = sbi;
/* Set default values for options: non-aggressive tails, RO on errors */
REISERFS_SB(s)->s_mount_opt |= (1 << REISERFS_SMALLTAIL);
return (0);
error:
- reiserfs_write_unlock(s);
-error_alloc:
if (jinit_done) { /* kill the commit thread, free journal ram */
journal_release_error(NULL, s);
}
+ reiserfs_write_unlock(s);
+
reiserfs_free_bitmap_cache(s);
if (SB_BUFFER_WITH_SB(s))
brelse(SB_BUFFER_WITH_SB(s));
#include <linux/dcache.h>
#include <linux/namei.h>
#include <linux/errno.h>
+#include <linux/gfp.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/pagemap.h>
if (!err && new_size < i_size_read(dentry->d_inode)) {
struct iattr newattrs = {
.ia_ctime = current_fs_time(inode->i_sb),
- .ia_size = buffer_size,
+ .ia_size = new_size,
.ia_valid = ATTR_SIZE | ATTR_CTIME,
};
return generic_permission(inode, mask, NULL);
}
-/* This will catch lookups from the fs root to .reiserfs_priv */
-static int
-xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
+static int xattr_hide_revalidate(struct dentry *dentry, struct nameidata *nd)
{
- struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
- if (container_of(q1, struct dentry, d_name) == priv_root)
- return -ENOENT;
- if (q1->len == name->len &&
- !memcmp(q1->name, name->name, name->len))
- return 0;
- return 1;
+ return -EPERM;
}
static const struct dentry_operations xattr_lookup_poison_ops = {
- .d_compare = xattr_lookup_poison,
+ .d_revalidate = xattr_hide_revalidate,
};
int reiserfs_lookup_privroot(struct super_block *s)
strlen(PRIVROOT_NAME));
if (!IS_ERR(dentry)) {
REISERFS_SB(s)->priv_root = dentry;
- if (!reiserfs_expose_privroot(s))
- s->s_root->d_op = &xattr_lookup_poison_ops;
+ dentry->d_op = &xattr_lookup_poison_ops;
if (dentry->d_inode)
dentry->d_inode->i_flags |= S_PRIVATE;
} else
#include <linux/errno.h>
#include <linux/pagemap.h>
#include <linux/xattr.h>
+#include <linux/slab.h>
#include <linux/posix_acl_xattr.h>
#include <linux/reiserfs_xattr.h>
#include <linux/reiserfs_acl.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/xattr.h>
+#include <linux/slab.h>
#include <linux/reiserfs_xattr.h>
#include <linux/security.h>
#include <asm/uaccess.h>
return error;
}
- if (sec->length) {
+ if (sec->length && reiserfs_xattrs_initialized(inode->i_sb)) {
blocks = reiserfs_xattr_jcreate_nblocks(inode) +
reiserfs_xattr_nblocks(inode, sec->length);
/* We don't want to count the directories twice if we have
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/list.h>
#include <linux/fcntl.h>
#include <linux/stat.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/smp_lock.h>
#include <linux/net.h>
if (server->conn_pid)
kill_pid(server->conn_pid, SIGTERM, 1);
+ bdi_destroy(&server->bdi);
kfree(server->ops);
smb_unload_nls(server);
sb->s_fs_info = NULL;
if (!server)
goto out_no_server;
sb->s_fs_info = server;
+
+ if (bdi_setup_and_register(&server->bdi, "smbfs", BDI_CAP_MAP_COPY))
+ goto out_bdi;
+
+ sb->s_bdi = &server->bdi;
server->super_block = sb;
server->mnt = NULL;
out_bad_option:
kfree(mem);
out_no_mem:
+ bdi_destroy(&server->bdi);
+out_bdi:
if (!server->mnt)
printk(KERN_ERR "smb_fill_super: allocation failure\n");
sb->s_fs_info = NULL;
#include <linux/string.h>
#include <linux/stat.h>
#include <linux/errno.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <linux/file.h>
#include <linux/dcache.h>
#include <linux/pagemap.h>
#include <linux/net.h>
#include <linux/namei.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/syscalls.h>
#include <linux/uio.h>
#include <linux/security.h>
+#include <linux/gfp.h>
/*
* Attempt to steal a page from a pipe buffer. This should perhaps go into
u64 cur_index = index >> msblk->devblksize_log2;
int bytes, compressed, b = 0, k = 0, page = 0, avail;
-
- bh = kcalloc((msblk->block_size >> msblk->devblksize_log2) + 1,
- sizeof(*bh), GFP_KERNEL);
+ bh = kcalloc(((srclength + msblk->devblksize - 1)
+ >> msblk->devblksize_log2) + 1, sizeof(*bh), GFP_KERNEL);
if (bh == NULL)
return -ENOMEM;
err = squashfs_read_inode(root, root_inode);
if (err) {
- iget_failed(root);
+ make_bad_inode(root);
+ iput(root);
goto failed_mount;
}
insert_inode_hash(root);
kfree(sbi->id_table);
kfree(sbi->fragment_index);
kfree(sbi->meta_index);
+ kfree(sbi->inode_lookup_table);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
#include <linux/fs.h>
#include <linux/vfs.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/pagemap.h>
#include <linux/mutex.h>
#include <linux/buffer_head.h>
+#include <linux/slab.h>
#include <linux/zlib.h>
#include "squashfs_fs.h"
goto release_mutex;
}
+ length = stream->total_out;
mutex_unlock(&msblk->read_data_mutex);
- return stream->total_out;
+ return length;
release_mutex:
mutex_unlock(&msblk->read_data_mutex);
#include <linux/kobject.h>
#include <linux/mutex.h>
#include <linux/file.h>
+#include <linux/backing-dev.h>
#include <asm/uaccess.h>
#include "internal.h"
return -EMFILE;
}
s->s_dev = MKDEV(0, dev & MINORMASK);
+ s->s_bdi = &noop_backing_dev_info;
return 0;
}
if (error < 0)
goto out_free_secdata;
BUG_ON(!mnt->mnt_sb);
+ WARN_ON(!mnt->mnt_sb->s_bdi);
- error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
- if (error)
- goto out_sb;
+ error = security_sb_kern_mount(mnt->mnt_sb, flags, secdata);
+ if (error)
+ goto out_sb;
/*
* filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
#include <linux/kernel.h>
#include <linux/file.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/writeback.h>
#include <linux/pagemap.h>
#include <linux/quotaops.h>
#include <linux/buffer_head.h>
+#include <linux/backing-dev.h>
#include "internal.h"
#define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
* This should be safe, as we require bdi backing to actually
* write out data in the first place
*/
- if (!sb->s_bdi)
+ if (!sb->s_bdi || sb->s_bdi == &noop_backing_dev_info)
return 0;
if (sb->s_qcop && sb->s_qcop->quota_sync)
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/xattr.h>
#include <linux/security.h>
#include "sysfs.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/magic.h>
+#include <linux/slab.h>
#include "sysfs.h"
*/
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/mount.h>
#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/time.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include "ubifs.h"
/**
#include <linux/moduleparam.h>
#include <linux/debugfs.h>
#include <linux/math64.h>
+#include <linux/slab.h>
#ifdef CONFIG_UBIFS_FS_DEBUG
#include "ubifs.h"
#include <linux/mount.h>
#include <linux/namei.h>
+#include <linux/slab.h>
static int read_block(struct inode *inode, void *addr, unsigned int block,
struct ubifs_data_node *dn)
* good, and GC takes extra care when moving them.
*/
+#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/list_sort.h>
#include "ubifs.h"
*/
#include <linux/crc32.h>
+#include <linux/slab.h>
#include "ubifs.h"
/**
#include "ubifs.h"
#include <linux/crc16.h>
#include <linux/math64.h>
+#include <linux/slab.h>
/**
* do_calc_lpt_geom - calculate sizes for the LPT area.
*/
#include <linux/crc16.h>
+#include <linux/slab.h>
#include "ubifs.h"
/**
*/
#include <linux/crc32.h>
+#include <linux/slab.h>
#include "ubifs.h"
/**
*/
#include "ubifs.h"
+#include <linux/slab.h>
#include <linux/random.h>
#include <linux/math64.h>
*/
#include <linux/crc32.h>
+#include <linux/slab.h>
#include "ubifs.h"
/*
#include <linux/fs.h>
#include <linux/err.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
*/
#include "ubifs.h"
+#include <linux/slab.h>
#include <linux/xattr.h>
#include <linux/posix_acl_xattr.h>
mutex_lock(&sbi->s_alloc_mutex);
partmap = &sbi->s_partmaps[bloc->partitionReferenceNum];
- if (bloc->logicalBlockNum < 0 ||
- (bloc->logicalBlockNum + count) >
- partmap->s_partition_len) {
+ if (bloc->logicalBlockNum + count < count ||
+ (bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
bloc->logicalBlockNum, 0, bloc->logicalBlockNum,
count, partmap->s_partition_len);
mutex_lock(&sbi->s_alloc_mutex);
partmap = &sbi->s_partmaps[bloc->partitionReferenceNum];
- if (bloc->logicalBlockNum < 0 ||
- (bloc->logicalBlockNum + count) >
- partmap->s_partition_len) {
+ if (bloc->logicalBlockNum + count < count ||
+ (bloc->logicalBlockNum + count) > partmap->s_partition_len) {
udf_debug("%d < %d || %d + %d > %d\n",
bloc->logicalBlockNum, 0, bloc->logicalBlockNum, count,
partmap->s_partition_len);
.llseek = generic_file_llseek,
};
-static int udf_setattr(struct dentry *dentry, struct iattr *iattr)
+int udf_setattr(struct dentry *dentry, struct iattr *iattr)
{
struct inode *inode = dentry->d_inode;
int error;
break;
case ICBTAG_FILE_TYPE_SYMLINK:
inode->i_data.a_ops = &udf_symlink_aops;
- inode->i_op = &page_symlink_inode_operations;
+ inode->i_op = &udf_symlink_inode_operations;
inode->i_mode = S_IFLNK | S_IRWXUGO;
break;
case ICBTAG_FILE_TYPE_MAIN:
iinfo = UDF_I(inode);
inode->i_mode = S_IFLNK | S_IRWXUGO;
inode->i_data.a_ops = &udf_symlink_aops;
- inode->i_op = &page_symlink_inode_operations;
+ inode->i_op = &udf_symlink_inode_operations;
if (iinfo->i_alloc_type != ICBTAG_FLAG_AD_IN_ICB) {
struct kernel_lb_addr eloc;
const struct inode_operations udf_dir_inode_operations = {
.lookup = udf_lookup,
.create = udf_create,
+ .setattr = udf_setattr,
.link = udf_link,
.unlink = udf_unlink,
.symlink = udf_symlink,
.mknod = udf_mknod,
.rename = udf_rename,
};
+const struct inode_operations udf_symlink_inode_operations = {
+ .readlink = generic_readlink,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
+ .setattr = udf_setattr,
+};
#include <linux/fs.h>
#include <linux/string.h>
-#include <linux/slab.h>
#include <linux/buffer_head.h>
uint32_t udf_get_pblock(struct super_block *sb, uint32_t block,
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/stat.h>
-#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
extern const struct file_operations udf_dir_operations;
extern const struct inode_operations udf_file_inode_operations;
extern const struct file_operations udf_file_operations;
+extern const struct inode_operations udf_symlink_inode_operations;
extern const struct address_space_operations udf_aops;
extern const struct address_space_operations udf_adinicb_aops;
extern const struct address_space_operations udf_symlink_aops;
/* file.c */
extern int udf_ioctl(struct inode *, struct file *, unsigned int,
unsigned long);
-
+extern int udf_setattr(struct dentry *dentry, struct iattr *iattr);
/* inode.c */
extern struct inode *udf_iget(struct super_block *, struct kernel_lb_addr *);
extern int udf_sync_inode(struct inode *);
#include <linux/string.h> /* for memset */
#include <linux/nls.h>
#include <linux/crc-itu-t.h>
+#include <linux/slab.h>
#include "udf_sb.h"
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/posix_acl_xattr.h>
+#include <linux/gfp.h>
/*
*/
#include <linux/mm.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include "xfs_inode.h"
#include "xfs_vnodeops.h"
#include "xfs_trace.h"
+#include <linux/slab.h>
#include <linux/xattr.h>
#include <linux/posix_acl_xattr.h>
#include "xfs_vnodeops.h"
#include "xfs_trace.h"
#include "xfs_bmap.h"
+#include <linux/gfp.h>
#include <linux/mpage.h>
#include <linux/pagevec.h>
#include <linux/writeback.h>
#include "xfs.h"
#include <linux/stddef.h>
#include <linux/errno.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/pagemap.h>
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/exportfs.h>
/*
#include <linux/compat.h>
#include <linux/ioctl.h>
#include <linux/mount.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include "xfs.h"
#include "xfs_fs.h"
#include <linux/security.h>
#include <linux/falloc.h>
#include <linux/fiemap.h>
+#include <linux/slab.h>
/*
* Bring the timestamps in the XFS inode uptodate.
#include <linux/namei.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/mempool.h>
#include <linux/writeback.h>
xfs_unmountfs(mp);
xfs_freesb(mp);
+ xfs_inode_shrinker_unregister(mp);
xfs_icsb_destroy_counters(mp);
xfs_close_devices(mp);
xfs_dmops_put(mp);
if (error)
goto fail_vnrele;
+ xfs_inode_shrinker_register(mp);
+
kfree(mtpt);
return 0;
goto out_cleanup_procfs;
vfs_initquota();
+ xfs_inode_shrinker_init();
error = register_filesystem(&xfs_fs_type);
if (error)
{
vfs_exitquota();
unregister_filesystem(&xfs_fs_type);
+ xfs_inode_shrinker_destroy();
xfs_sysctl_unregister();
xfs_cleanup_procfs();
xfs_buf_terminate();
struct xfs_perag *pag, int flags),
int flags,
int tag,
- int exclusive)
+ int exclusive,
+ int *nr_to_scan)
{
uint32_t first_index;
int last_error = 0;
if (error == EFSCORRUPTED)
break;
- } while (1);
+ } while ((*nr_to_scan)--);
if (skipped) {
delay(1);
struct xfs_perag *pag, int flags),
int flags,
int tag,
- int exclusive)
+ int exclusive,
+ int *nr_to_scan)
{
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
+ int nr;
+ nr = nr_to_scan ? *nr_to_scan : INT_MAX;
for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
struct xfs_perag *pag;
continue;
}
error = xfs_inode_ag_walk(mp, pag, execute, flags, tag,
- exclusive);
+ exclusive, &nr);
xfs_perag_put(pag);
if (error) {
last_error = error;
if (error == EFSCORRUPTED)
break;
}
+ if (nr <= 0)
+ break;
}
+ if (nr_to_scan)
+ *nr_to_scan = nr;
return XFS_ERROR(last_error);
}
ASSERT((flags & ~(SYNC_TRYLOCK|SYNC_WAIT)) == 0);
error = xfs_inode_ag_iterator(mp, xfs_sync_inode_data, flags,
- XFS_ICI_NO_TAG, 0);
+ XFS_ICI_NO_TAG, 0, NULL);
if (error)
return XFS_ERROR(error);
ASSERT((flags & ~SYNC_WAIT) == 0);
return xfs_inode_ag_iterator(mp, xfs_sync_inode_attr, flags,
- XFS_ICI_NO_TAG, 0);
+ XFS_ICI_NO_TAG, 0, NULL);
}
STATIC int
radix_tree_tag_set(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
+ pag->pag_ici_reclaimable++;
}
/*
{
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG);
+ pag->pag_ici_reclaimable--;
}
/*
* call into reclaim to find it in a clean state instead of waiting for
* it now. We also don't return errors here - if the error is transient
* then the next reclaim pass will flush the inode, and if the error
- * is permanent then the next sync reclaim will relcaim the inode and
+ * is permanent then the next sync reclaim will reclaim the inode and
* pass on the error.
*/
- if (error && !XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ if (error && error != EAGAIN && !XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_fs_cmn_err(CE_WARN, ip->i_mount,
"inode 0x%llx background reclaim flush failed with %d",
(long long)ip->i_ino, error);
int mode)
{
return xfs_inode_ag_iterator(mp, xfs_reclaim_inode, mode,
- XFS_ICI_RECLAIM_TAG, 1);
+ XFS_ICI_RECLAIM_TAG, 1, NULL);
+}
+
+/*
+ * Shrinker infrastructure.
+ *
+ * This is all far more complex than it needs to be. It adds a global list of
+ * mounts because the shrinkers can only call a global context. We need to make
+ * the shrinkers pass a context to avoid the need for global state.
+ */
+static LIST_HEAD(xfs_mount_list);
+static struct rw_semaphore xfs_mount_list_lock;
+
+static int
+xfs_reclaim_inode_shrink(
+ int nr_to_scan,
+ gfp_t gfp_mask)
+{
+ struct xfs_mount *mp;
+ struct xfs_perag *pag;
+ xfs_agnumber_t ag;
+ int reclaimable = 0;
+
+ if (nr_to_scan) {
+ if (!(gfp_mask & __GFP_FS))
+ return -1;
+
+ down_read(&xfs_mount_list_lock);
+ list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
+ xfs_inode_ag_iterator(mp, xfs_reclaim_inode, 0,
+ XFS_ICI_RECLAIM_TAG, 1, &nr_to_scan);
+ if (nr_to_scan <= 0)
+ break;
+ }
+ up_read(&xfs_mount_list_lock);
+ }
+
+ down_read(&xfs_mount_list_lock);
+ list_for_each_entry(mp, &xfs_mount_list, m_mplist) {
+ for (ag = 0; ag < mp->m_sb.sb_agcount; ag++) {
+
+ pag = xfs_perag_get(mp, ag);
+ if (!pag->pag_ici_init) {
+ xfs_perag_put(pag);
+ continue;
+ }
+ reclaimable += pag->pag_ici_reclaimable;
+ xfs_perag_put(pag);
+ }
+ }
+ up_read(&xfs_mount_list_lock);
+ return reclaimable;
+}
+
+static struct shrinker xfs_inode_shrinker = {
+ .shrink = xfs_reclaim_inode_shrink,
+ .seeks = DEFAULT_SEEKS,
+};
+
+void __init
+xfs_inode_shrinker_init(void)
+{
+ init_rwsem(&xfs_mount_list_lock);
+ register_shrinker(&xfs_inode_shrinker);
+}
+
+void
+xfs_inode_shrinker_destroy(void)
+{
+ ASSERT(list_empty(&xfs_mount_list));
+ unregister_shrinker(&xfs_inode_shrinker);
+}
+
+void
+xfs_inode_shrinker_register(
+ struct xfs_mount *mp)
+{
+ down_write(&xfs_mount_list_lock);
+ list_add_tail(&mp->m_mplist, &xfs_mount_list);
+ up_write(&xfs_mount_list_lock);
+}
+
+void
+xfs_inode_shrinker_unregister(
+ struct xfs_mount *mp)
+{
+ down_write(&xfs_mount_list_lock);
+ list_del(&mp->m_mplist);
+ up_write(&xfs_mount_list_lock);
}
int xfs_sync_inode_valid(struct xfs_inode *ip, struct xfs_perag *pag);
int xfs_inode_ag_iterator(struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, struct xfs_perag *pag, int flags),
- int flags, int tag, int write_lock);
+ int flags, int tag, int write_lock, int *nr_to_scan);
+
+void xfs_inode_shrinker_init(void);
+void xfs_inode_shrinker_destroy(void);
+void xfs_inode_shrinker_register(struct xfs_mount *mp);
+void xfs_inode_shrinker_unregister(struct xfs_mount *mp);
#endif
uint flags)
{
ASSERT(mp->m_quotainfo);
- xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags, XFS_ICI_NO_TAG, 0);
+ xfs_inode_ag_iterator(mp, xfs_dqrele_inode, flags,
+ XFS_ICI_NO_TAG, 0, NULL);
}
/*------------------------------------------------------------------------*/
int pag_ici_init; /* incore inode cache initialised */
rwlock_t pag_ici_lock; /* incore inode lock */
struct radix_tree_root pag_ici_root; /* incore inode cache root */
+ int pag_ici_reclaimable; /* reclaimable inodes */
#endif
int pagb_count; /* pagb slots in use */
xfs_perag_busy_t pagb_list[XFS_PAGB_NUM_SLOTS]; /* unstable blocks */
XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) > tip->i_df.if_ext_max)
return EINVAL;
- /* Check root block of temp in btree form to max in target */
+ /*
+ * If we are in a btree format, check that the temp root block will fit
+ * in the target and that it has enough extents to be in btree format
+ * in the target.
+ *
+ * Note that we have to be careful to allow btree->extent conversions
+ * (a common defrag case) which will occur when the temp inode is in
+ * extent format...
+ */
if (tip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_BOFF(ip) &&
- tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip))
+ ((XFS_IFORK_BOFF(ip) &&
+ tip->i_df.if_broot_bytes > XFS_IFORK_BOFF(ip)) ||
+ XFS_IFORK_NEXTENTS(tip, XFS_DATA_FORK) <= ip->i_df.if_ext_max))
return EINVAL;
- /* Check root block of target in btree form to max in temp */
+ /* Reciprocal target->temp btree format checks */
if (ip->i_d.di_format == XFS_DINODE_FMT_BTREE &&
- XFS_IFORK_BOFF(tip) &&
- ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip))
+ ((XFS_IFORK_BOFF(tip) &&
+ ip->i_df.if_broot_bytes > XFS_IFORK_BOFF(tip)) ||
+ XFS_IFORK_NEXTENTS(ip, XFS_DATA_FORK) <= tip->i_df.if_ext_max))
return EINVAL;
return 0;
/*
* Determine if we have a transaction that has gone to disk
- * that needs to be covered. Log activity needs to be idle (no AIL and
- * nothing in the iclogs). And, we need to be in the right state indicating
- * something has gone out.
+ * that needs to be covered. To begin the transition to the idle state
+ * firstly the log needs to be idle (no AIL and nothing in the iclogs).
+ * If we are then in a state where covering is needed, the caller is informed
+ * that dummy transactions are required to move the log into the idle state.
+ *
+ * Because this is called as part of the sync process, we should also indicate
+ * that dummy transactions should be issued in anything but the covered or
+ * idle states. This ensures that the log tail is accurately reflected in
+ * the log at the end of the sync, hence if a crash occurrs avoids replay
+ * of transactions where the metadata is already on disk.
*/
int
xfs_log_need_covered(xfs_mount_t *mp)
return 0;
spin_lock(&log->l_icloglock);
- if (((log->l_covered_state == XLOG_STATE_COVER_NEED) ||
- (log->l_covered_state == XLOG_STATE_COVER_NEED2))
- && !xfs_trans_ail_tail(log->l_ailp)
- && xlog_iclogs_empty(log)) {
- if (log->l_covered_state == XLOG_STATE_COVER_NEED)
- log->l_covered_state = XLOG_STATE_COVER_DONE;
- else {
- ASSERT(log->l_covered_state == XLOG_STATE_COVER_NEED2);
- log->l_covered_state = XLOG_STATE_COVER_DONE2;
+ switch (log->l_covered_state) {
+ case XLOG_STATE_COVER_DONE:
+ case XLOG_STATE_COVER_DONE2:
+ case XLOG_STATE_COVER_IDLE:
+ break;
+ case XLOG_STATE_COVER_NEED:
+ case XLOG_STATE_COVER_NEED2:
+ if (!xfs_trans_ail_tail(log->l_ailp) &&
+ xlog_iclogs_empty(log)) {
+ if (log->l_covered_state == XLOG_STATE_COVER_NEED)
+ log->l_covered_state = XLOG_STATE_COVER_DONE;
+ else
+ log->l_covered_state = XLOG_STATE_COVER_DONE2;
}
+ /* FALLTHRU */
+ default:
needed = 1;
+ break;
}
spin_unlock(&log->l_icloglock);
return needed;
wait_queue_head_t m_wait_single_sync_task;
__int64_t m_update_flags; /* sb flags we need to update
on the next remount,rw */
+ struct list_head m_mplist; /* inode shrinker mount list */
} xfs_mount_t;
/*
#define ACPI_VIDEO_HID "LNXVIDEO"
#define ACPI_BAY_HID "LNXIOBAY"
#define ACPI_DOCK_HID "LNXDOCK"
+/* Quirk for broken IBM BIOSes */
+#define ACPI_SMBUS_IBM_HID "SMBUSIBM"
/*
* For fixed hardware buttons, we fabricate acpi_devices with HID
#include <linux/mm.h>
#include <linux/cdev.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#if defined(__alpha__) || defined(__powerpc__)
#include <asm/pgtable.h> /* For pte_wrprotect */
#endif
{
}
-
-static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
-{
- if (size != 0 && nmemb > ULONG_MAX / size)
- return NULL;
-
- if (size * nmemb <= PAGE_SIZE)
- return kcalloc(nmemb, size, GFP_KERNEL);
-
- return __vmalloc(size * nmemb,
- GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
-}
-
-/* Modeled after cairo's malloc_ab, it's like calloc but without the zeroing. */
-static __inline__ void *drm_malloc_ab(size_t nmemb, size_t size)
-{
- if (size != 0 && nmemb > ULONG_MAX / size)
- return NULL;
-
- if (size * nmemb <= PAGE_SIZE)
- return kmalloc(nmemb * size, GFP_KERNEL);
-
- return __vmalloc(size * nmemb,
- GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
-}
-
-static __inline void drm_free_large(void *ptr)
-{
- if (!is_vmalloc_addr(ptr))
- return kfree(ptr);
-
- vfree(ptr);
-}
+#include "drm_mem_util.h"
/*@}*/
#endif /* __KERNEL__ */
--- /dev/null
+/*
+ * Copyright © 2008 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * Jesse Barnes <jbarnes@virtuousgeek.org>
+ *
+ */
+#ifndef _DRM_MEM_UTIL_H_
+#define _DRM_MEM_UTIL_H_
+
+#include <linux/vmalloc.h>
+
+static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
+{
+ if (size != 0 && nmemb > ULONG_MAX / size)
+ return NULL;
+
+ if (size * nmemb <= PAGE_SIZE)
+ return kcalloc(nmemb, size, GFP_KERNEL);
+
+ return __vmalloc(size * nmemb,
+ GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+}
+
+/* Modeled after cairo's malloc_ab, it's like calloc but without the zeroing. */
+static __inline__ void *drm_malloc_ab(size_t nmemb, size_t size)
+{
+ if (size != 0 && nmemb > ULONG_MAX / size)
+ return NULL;
+
+ if (size * nmemb <= PAGE_SIZE)
+ return kmalloc(nmemb * size, GFP_KERNEL);
+
+ return __vmalloc(size * nmemb,
+ GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
+}
+
+static __inline void drm_free_large(void *ptr)
+{
+ if (!is_vmalloc_addr(ptr))
+ return kfree(ptr);
+
+ vfree(ptr);
+}
+
+#endif
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3152, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3154, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x3155, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3E50, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x3E54, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
{0x1002, 0x4136, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS100|RADEON_IS_IGP}, \
{0x1002, 0x9712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9713, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9714, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9715, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
struct ttm_backend_func *func;
};
-#define TTM_PAGE_FLAG_VMALLOC (1 << 0)
#define TTM_PAGE_FLAG_USER (1 << 1)
#define TTM_PAGE_FLAG_USER_DIRTY (1 << 2)
#define TTM_PAGE_FLAG_WRITE (1 << 3)
extern int ttm_bo_wait_unreserved(struct ttm_buffer_object *bo,
bool interruptible);
-/**
- * ttm_bo_block_reservation
- *
- * @bo: A pointer to a struct ttm_buffer_object.
- * @interruptible: Use interruptible sleep when waiting.
- * @no_wait: Don't sleep, but rather return -EBUSY.
- *
- * Block reservation for validation by simply reserving the buffer.
- * This is intended for single buffer use only without eviction,
- * and thus needs no deadlock protection.
- *
- * Returns:
- * -EBUSY: If no_wait == 1 and the buffer is already reserved.
- * -ERESTARTSYS: If interruptible == 1 and the process received a signal
- * while sleeping.
- */
-extern int ttm_bo_block_reservation(struct ttm_buffer_object *bo,
- bool interruptible, bool no_wait);
-
-/**
- * ttm_bo_unblock_reservation
- *
- * @bo: A pointer to a struct ttm_buffer_object.
- *
- * Unblocks reservation leaving lru lists untouched.
- */
-extern void ttm_bo_unblock_reservation(struct ttm_buffer_object *bo);
-
/*
* ttm_bo_util.c
*/
#ifndef ASMARM_AMBA_H
#define ASMARM_AMBA_H
+#include <linux/device.h>
+#include <linux/resource.h>
+
#define AMBA_NR_IRQS 2
struct amba_device {
+#include <linux/types.h>
+
/* platform data for the PL061 GPIO driver */
struct pl061_platform_data {
static inline int lba_28_ok(u64 block, u32 n_block)
{
- /* check the ending block number */
- return ((block + n_block) < ((u64)1 << 28)) && (n_block <= 256);
+ /* check the ending block number: must be LESS THAN 0x0fffffff */
+ return ((block + n_block) < ((1 << 28) - 1)) && (n_block <= 256);
}
static inline int lba_48_ok(u64 block, u32 n_block)
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
+int bdi_setup_and_register(struct backing_dev_info *, char *, unsigned int);
void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
long nr_pages);
int bdi_writeback_task(struct bdi_writeback *wb);
#endif
extern struct backing_dev_info default_backing_dev_info;
+extern struct backing_dev_info noop_backing_dev_info;
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page);
int writeback_in_progress(struct backing_dev_info *bdi);
(bit) < (size); \
(bit) = find_next_bit((addr), (size), (bit) + 1))
-/* Temporary */
-#define for_each_bit(bit, addr, size) for_each_set_bit(bit, addr, size)
-
static __inline__ int get_bitmask_order(unsigned int count)
{
int order;
struct request {
struct list_head queuelist;
struct call_single_data csd;
- int cpu;
struct request_queue *q;
enum rq_cmd_type_bits cmd_type;
unsigned long atomic_flags;
+ int cpu;
+
/* the following two fields are internal, NEVER access directly */
- sector_t __sector; /* sector cursor */
unsigned int __data_len; /* total data len */
+ sector_t __sector; /* sector cursor */
struct bio *bio;
struct bio *biotail;
unsigned short ioprio;
+ int ref_count;
+
void *special; /* opaque pointer available for LLD use */
char *buffer; /* kaddr of the current segment if available */
int tag;
int errors;
- int ref_count;
-
/*
* when request is used as a packet command carrier
*/
- unsigned short cmd_len;
unsigned char __cmd[BLK_MAX_CDB];
unsigned char *cmd;
+ unsigned short cmd_len;
unsigned int extra_len; /* length of alignment and padding */
unsigned int sense_len;
extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
extern void blk_queue_bounce_limit(struct request_queue *, u64);
extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
-
-/* Temporary compatibility wrapper */
-static inline void blk_queue_max_sectors(struct request_queue *q, unsigned int max)
-{
- blk_queue_max_hw_sectors(q, max);
-}
-
extern void blk_queue_max_segments(struct request_queue *, unsigned short);
-
-static inline void blk_queue_max_phys_segments(struct request_queue *q, unsigned short max)
-{
- blk_queue_max_segments(q, max);
-}
-
-static inline void blk_queue_max_hw_segments(struct request_queue *q, unsigned short max)
-{
- blk_queue_max_segments(q, max);
-}
-
-
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_max_discard_sectors(struct request_queue *q,
unsigned int max_discard_sectors);
extern int blk_verify_command(unsigned char *cmd, fmode_t has_write_perm);
-#define MAX_PHYS_SEGMENTS 128
-#define MAX_HW_SEGMENTS 128
-#define SAFE_MAX_SECTORS 255
-#define MAX_SEGMENT_SIZE 65536
-
enum blk_default_limits {
BLK_MAX_SEGMENTS = 128,
BLK_SAFE_MAX_SECTORS = 255,
{
return rcu_dereference_check(task->cgroups->subsys[subsys_id],
rcu_read_lock_held() ||
+ lockdep_is_held(&task->alloc_lock) ||
cgroup_lock_is_held());
}
+/*
+ * See Documentation/circular-buffers.txt for more information.
+ */
+
#ifndef _LINUX_CIRC_BUF_H
#define _LINUX_CIRC_BUF_H 1
* @list: list head for the management code
* @mode: operating mode assigned by the management code
* @next_event: local storage for the next event in oneshot mode
+ * @retries: number of forced programming retries
*/
struct clock_event_device {
const char *name;
struct list_head list;
enum clock_event_mode mode;
ktime_t next_event;
+ unsigned long retries;
};
/*
#define MAX_CODADEVS 5 /* how many do we allow */
#ifdef __KERNEL__
+#include <linux/backing-dev.h>
+
struct kstatfs;
/* communication pending/processing queues */
struct list_head vc_processing;
int vc_inuse;
struct super_block *vc_sb;
+ struct backing_dev_info bdi;
};
#define _LINUX_DELAYACCT_H
#include <linux/sched.h>
+#include <linux/slab.h>
/*
* Per-task flags relevant to delay accounting
#define REL_VERSION "8.3.7"
#define API_VERSION 88
#define PRO_VERSION_MIN 86
-#define PRO_VERSION_MAX 91
+#define PRO_VERSION_MAX 92
enum drbd_io_error_p {
#endif
NL_PACKET(primary, 1,
- NL_BIT( 1, T_MAY_IGNORE, overwrite_peer)
+ NL_BIT( 1, T_MAY_IGNORE, primary_force)
)
NL_PACKET(secondary, 2, )
NL_BIT( 41, T_MAY_IGNORE, always_asbp)
NL_BIT( 61, T_MAY_IGNORE, no_cork)
NL_BIT( 62, T_MANDATORY, auto_sndbuf_size)
+ NL_BIT( 70, T_MANDATORY, dry_run)
)
NL_PACKET(disconnect, 6, )
static inline int ext3_test_inode_state(struct inode *inode, int bit)
{
- return test_bit(bit, &EXT3_I(inode)->i_state);
+ return test_bit(bit, &EXT3_I(inode)->i_state_flags);
}
static inline void ext3_set_inode_state(struct inode *inode, int bit)
{
- set_bit(bit, &EXT3_I(inode)->i_state);
+ set_bit(bit, &EXT3_I(inode)->i_state_flags);
}
static inline void ext3_clear_inode_state(struct inode *inode, int bit)
{
- clear_bit(bit, &EXT3_I(inode)->i_state);
+ clear_bit(bit, &EXT3_I(inode)->i_state_flags);
}
#else
/* Assume that user mode programs are passing in an ext3fs superblock, not
* near to their parent directory's inode.
*/
__u32 i_block_group;
- unsigned long i_state; /* Dynamic state flags for ext3 */
+ unsigned long i_state_flags; /* Dynamic state flags for ext3 */
/* block reservation info */
struct ext3_block_alloc_info *i_block_alloc_info;
/*
* Char device interface.
*
- * Copyright (C) 2005-2006 Kristian Hoegsberg <krh@bitplanet.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
*/
#ifndef _LINUX_FIREWIRE_CDEV_H
* @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE
* @header_size: Header size to strip for receive contexts
* @channel: Channel to bind to
- * @speed: Speed to transmit at
+ * @speed: Speed for transmit contexts
* @closure: To be returned in &fw_cdev_event_iso_interrupt
* @handle: Handle to context, written back by kernel
*
* If a context was successfully created, the kernel writes back a handle to the
* context, which must be passed in for subsequent operations on that context.
*
+ * For receive contexts, @header_size must be at least 4 and must be a multiple
+ * of 4.
+ *
* Note that the effect of a @header_size > 4 depends on
* &fw_cdev_get_info.version, as documented at &fw_cdev_event_iso_interrupt.
*/
*
* &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
*
- * Use the FW_CDEV_ISO_ macros to fill in @control. The sy and tag fields are
- * specified by IEEE 1394a and IEC 61883.
- *
- * FIXME - finish this documentation
+ * Use the FW_CDEV_ISO_ macros to fill in @control.
+ *
+ * For transmit packets, the header length must be a multiple of 4 and specifies
+ * the numbers of bytes in @header that will be prepended to the packet's
+ * payload; these bytes are copied into the kernel and will not be accessed
+ * after the ioctl has returned. The sy and tag fields are copied to the iso
+ * packet header (these fields are specified by IEEE 1394a and IEC 61883-1).
+ * The skip flag specifies that no packet is to be sent in a frame; when using
+ * this, all other fields except the interrupt flag must be zero.
+ *
+ * For receive packets, the header length must be a multiple of the context's
+ * header size; if the header length is larger than the context's header size,
+ * multiple packets are queued for this entry. The sy and tag fields are
+ * ignored. If the sync flag is set, the context drops all packets until
+ * a packet with a matching sy field is received (the sync value to wait for is
+ * specified in the &fw_cdev_start_iso structure). The payload length defines
+ * how many payload bytes can be received for one packet (in addition to payload
+ * quadlets that have been defined as headers and are stripped and returned in
+ * the &fw_cdev_event_iso_interrupt structure). If more bytes are received, the
+ * additional bytes are dropped. If less bytes are received, the remaining
+ * bytes in this part of the payload buffer will not be written to, not even by
+ * the next packet, i.e., packets received in consecutive frames will not
+ * necessarily be consecutive in memory. If an entry has queued multiple
+ * packets, the payload length is divided equally among them.
+ *
+ * When a packet with the interrupt flag set has been completed, the
+ * &fw_cdev_event_iso_interrupt event will be sent. An entry that has queued
+ * multiple receive packets is completed when its last packet is completed.
*/
struct fw_cdev_iso_packet {
__u32 control;
* Queue a number of isochronous packets for reception or transmission.
* This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
* which describe how to transmit from or receive into a contiguous region
- * of a mmap()'ed payload buffer. As part of the packet descriptors,
+ * of a mmap()'ed payload buffer. As part of transmit packet descriptors,
* a series of headers can be supplied, which will be prepended to the
* payload during DMA.
*
* instead of allocated.
* An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
*
- * To summarize, %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE allocates iso resources
- * for the lifetime of the fd or handle.
+ * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
+ * for the lifetime of the fd or @handle.
* In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
* for the duration of a bus generation.
*
+/*
+ * IEEE 1394 constants.
+ *
+ * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
#ifndef _LINUX_FIREWIRE_CONSTANTS_H
#define _LINUX_FIREWIRE_CONSTANTS_H
#define EXTCODE_WRAP_ADD 0x6
#define EXTCODE_VENDOR_DEPENDENT 0x7
-/* Juju specific tcodes */
+/* Linux firewire-core (Juju) specific tcodes */
#define TCODE_LOCK_MASK_SWAP (0x10 | EXTCODE_MASK_SWAP)
#define TCODE_LOCK_COMPARE_SWAP (0x10 | EXTCODE_COMPARE_SWAP)
#define TCODE_LOCK_FETCH_ADD (0x10 | EXTCODE_FETCH_ADD)
#define RCODE_TYPE_ERROR 0x6
#define RCODE_ADDRESS_ERROR 0x7
-/* Juju specific rcodes */
+/* Linux firewire-core (Juju) specific rcodes */
#define RCODE_SEND_ERROR 0x10
#define RCODE_CANCELLED 0x11
#define RCODE_BUSY 0x12
extern void cancel_freezing(struct task_struct *p);
#ifdef CONFIG_CGROUP_FREEZER
-extern int cgroup_frozen(struct task_struct *task);
+extern int cgroup_freezing_or_frozen(struct task_struct *task);
#else /* !CONFIG_CGROUP_FREEZER */
-static inline int cgroup_frozen(struct task_struct *task) { return 0; }
+static inline int cgroup_freezing_or_frozen(struct task_struct *task)
+{
+ return 0;
+}
#endif /* !CONFIG_CGROUP_FREEZER */
/*
/* fs/block_dev.c */
extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov,
unsigned long nr_segs, loff_t pos);
+extern int blkdev_fsync(struct file *filp, struct dentry *dentry, int datasync);
/* fs/splice.c */
extern ssize_t generic_file_splice_read(struct file *, loff_t *,
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
extern int __generic_block_fiemap(struct inode *inode,
- struct fiemap_extent_info *fieinfo, u64 start,
- u64 len, get_block_t *get_block);
+ struct fiemap_extent_info *fieinfo,
+ loff_t start, loff_t len,
+ get_block_t *get_block);
extern int generic_block_fiemap(struct inode *inode,
struct fiemap_extent_info *fieinfo, u64 start,
u64 len, get_block_t *get_block);
/* operation releaser */
fscache_operation_release_t release;
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
const char *name; /* operation name */
const char *state; /* operation state */
#define fscache_set_op_name(OP, N) do { (OP)->name = (N); } while(0)
#include <linux/inotify.h>
#include <linux/fsnotify_backend.h>
#include <linux/audit.h>
+#include <linux/slab.h>
/*
* fsnotify_d_instantiate - instantiate a dentry for inode
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/timer.h>
+#include <linux/slab.h>
struct gameport {
};
#define GENHD_FL_REMOVABLE 1
-#define GENHD_FL_DRIVERFS 2
+/* 2 is unused */
#define GENHD_FL_MEDIA_CHANGE_NOTIFY 4
#define GENHD_FL_CD 8
#define GENHD_FL_UP 16
int nr;
char name[48];
struct completion dev_released;
+
+ struct list_head userspace_clients;
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
-#define kobj_to_i2o_device(kobj) to_i2o_device(container_of(kobj, struct device, kobj))
/**
* i2o_out_to_virt - Turn an I2O message to a virtual address
extern void ide_timer_expiry(unsigned long);
extern irqreturn_t ide_intr(int irq, void *dev_id);
extern void do_ide_request(struct request_queue *);
+extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
void ide_init_disk(struct gendisk *, ide_drive_t *);
#define _IF_TUNNEL_H_
#include <linux/types.h>
+#include <asm/byteorder.h>
#ifdef __KERNEL__
#include <linux/ip.h>
* @active_low: gpio polarity
* @wakeup: controls whether the device should be set up as wakeup
* source
+ * @no_autorepeat: disable key autorepeat
*
* This structure represents platform-specific data that use used by
* matrix_keypad driver to perform proper initialization.
bool active_low;
bool wakeup;
+ bool no_autorepeat;
};
/**
#define _LINUX_IO_MAPPING_H
#include <linux/types.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/iomap.h>
extern struct resource ioport_resource;
extern struct resource iomem_resource;
+extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
extern int request_resource(struct resource *root, struct resource *new);
extern int release_resource(struct resource *new);
void release_child_resources(struct resource *new);
extern void reserve_region_with_split(struct resource *root,
resource_size_t start, resource_size_t end,
const char *name);
+extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new);
extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
extern int allocate_resource(struct resource *root, struct resource *new,
* mapped address is set in the ibft_addr variable.
*/
#ifdef CONFIG_ISCSI_IBFT_FIND
-extern void __init reserve_ibft_region(void);
+unsigned long find_ibft_region(unsigned long *sizep);
#else
-static inline void reserve_ibft_region(void) { }
+static inline unsigned long find_ibft_region(unsigned long *sizep)
+{
+ *sizep = 0;
+ return 0;
+}
#endif
#endif /* ISCSI_IBFT_H */
#include <linux/mutex.h>
#include <linux/timer.h>
#include <linux/lockdep.h>
+#include <linux/slab.h>
#define journal_oom_retry 1
#include <linux/bit_spinlock.h>
#include <linux/mutex.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#endif
#define journal_oom_retry 1
.burst = DEFAULT_RATELIMIT_BURST, \
}; \
\
- if (!__ratelimit(&_rs)) \
+ if (__ratelimit(&_rs)) \
printk(fmt, ##__VA_ARGS__); \
})
#else
*/
#define INIT_KFIFO(name) \
name = __kfifo_initializer(sizeof(name##kfifo_buffer) - \
- sizeof(struct kfifo), name##kfifo_buffer)
+ sizeof(struct kfifo), \
+ name##kfifo_buffer + sizeof(struct kfifo))
/**
* DEFINE_KFIFO - macro to define and initialize a kfifo
unsigned char name##kfifo_buffer[size]; \
struct kfifo name = __kfifo_initializer(size, name##kfifo_buffer)
-#undef __kfifo_initializer
-
extern void kfifo_init(struct kfifo *fifo, void *buffer,
unsigned int size);
extern __must_check int kfifo_alloc(struct kfifo *fifo, unsigned int size,
*/
struct kvm_io_bus {
int dev_count;
-#define NR_IOBUS_DEVS 6
+#define NR_IOBUS_DEVS 200
struct kvm_io_device *devs[NR_IOBUS_DEVS];
};
int user_alloc;
};
+static inline unsigned long kvm_dirty_bitmap_bytes(struct kvm_memory_slot *memslot)
+{
+ return ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+}
+
struct kvm_kernel_irq_routing_entry {
u32 gsi;
u32 type;
--- /dev/null
+#ifndef _LCM_H
+#define _LCM_H
+
+#include <linux/compiler.h>
+
+unsigned long lcm(unsigned long a, unsigned long b) __attribute_const__;
+
+#endif /* _LCM_H */
ATA_DFLAG_SLEEPING = (1 << 15), /* device is sleeping */
ATA_DFLAG_DUBIOUS_XFER = (1 << 16), /* data transfer not verified */
ATA_DFLAG_NO_UNLOAD = (1 << 17), /* device doesn't support unload */
+ ATA_DFLAG_UNLOCK_HPA = (1 << 18), /* unlock HPA */
ATA_DFLAG_INIT_MASK = (1 << 24) - 1,
ATA_DFLAG_DETACH = (1 << 24),
int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *);
int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *);
int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *);
- int (*hugetlb_entry)(pte_t *, unsigned long, unsigned long,
- struct mm_walk *);
+ int (*hugetlb_entry)(pte_t *, unsigned long,
+ unsigned long, unsigned long, struct mm_walk *);
struct mm_struct *mm;
void *private;
};
#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_MASK 0x3 /* Mask out reserved and DDR bits */
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
struct module_notes_attrs *notes_attrs;
#endif
+#ifdef CONFIG_SMP
/* Per-cpu data. */
- void *percpu;
+ void __percpu *percpu;
+ unsigned int percpu_size;
+#endif
/* The command line arguments (may be mangled). People like
keeping pointers to this stuff */
void (*exit)(void);
struct module_ref {
- int count;
+ unsigned int incs;
+ unsigned int decs;
} __percpu *refptr;
#endif
struct module *__module_text_address(unsigned long addr);
struct module *__module_address(unsigned long addr);
bool is_module_address(unsigned long addr);
+bool is_module_percpu_address(unsigned long addr);
bool is_module_text_address(unsigned long addr);
static inline int within_module_core(unsigned long addr, struct module *mod)
{
if (module) {
preempt_disable();
- __this_cpu_inc(module->refptr->count);
+ __this_cpu_inc(module->refptr->incs);
trace_module_get(module, _THIS_IP_,
- __this_cpu_read(module->refptr->count));
+ __this_cpu_read(module->refptr->incs));
preempt_enable();
}
}
preempt_disable();
if (likely(module_is_live(module))) {
- __this_cpu_inc(module->refptr->count);
+ __this_cpu_inc(module->refptr->incs);
trace_module_get(module, _THIS_IP_,
- __this_cpu_read(module->refptr->count));
- }
- else
+ __this_cpu_read(module->refptr->incs));
+ } else
ret = 0;
preempt_enable();
return false;
}
+static inline bool is_module_percpu_address(unsigned long addr)
+{
+ return false;
+}
+
static inline bool is_module_text_address(unsigned long addr)
{
return false;
#include <linux/ncp_mount.h>
#include <linux/net.h>
#include <linux/mutex.h>
+#include <linux/backing-dev.h>
#ifdef __KERNEL__
size_t len;
__u8 data[128];
} unexpected_packet;
+ struct backing_dev_info bdi;
};
extern void ncp_tcp_rcv_proc(struct work_struct *work);
* duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and
* ARP on active-backup slaves with arp_validate enabled.
*/
-static inline int skb_bond_should_drop(struct sk_buff *skb)
+static inline int skb_bond_should_drop(struct sk_buff *skb,
+ struct net_device *master)
{
- struct net_device *dev = skb->dev;
- struct net_device *master = dev->master;
-
if (master) {
+ struct net_device *dev = skb->dev;
+
if (master->priv_flags & IFF_MASTER_ARPMON)
dev->last_rx = jiffies;
extern int nfnetlink_has_listeners(struct net *net, unsigned int group);
extern int nfnetlink_send(struct sk_buff *skb, struct net *net, u32 pid, unsigned group,
int echo, gfp_t flags);
-extern void nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error);
+extern int nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error);
extern int nfnetlink_unicast(struct sk_buff *skb, struct net *net, u_int32_t pid, int flags);
extern void nfnl_lock(void);
enum nf_ip6_hook_priorities {
NF_IP6_PRI_FIRST = INT_MIN,
NF_IP6_PRI_CONNTRACK_DEFRAG = -400,
+ NF_IP6_PRI_RAW = -300,
NF_IP6_PRI_SELINUX_FIRST = -225,
NF_IP6_PRI_CONNTRACK = -200,
NF_IP6_PRI_MANGLE = -150,
extern int netlink_unicast(struct sock *ssk, struct sk_buff *skb, __u32 pid, int nonblock);
extern int netlink_broadcast(struct sock *ssk, struct sk_buff *skb, __u32 pid,
__u32 group, gfp_t allocation);
-extern void netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code);
+extern int netlink_set_err(struct sock *ssk, __u32 pid, __u32 group, int code);
extern int netlink_register_notifier(struct notifier_block *nb);
extern int netlink_unregister_notifier(struct notifier_block *nb);
#define NFS_INO_FLUSHING (4) /* inode is flushing out data */
#define NFS_INO_FSCACHE (5) /* inode can be cached by FS-Cache */
#define NFS_INO_FSCACHE_LOCK (6) /* FS-Cache cookie management lock */
+#define NFS_INO_COMMIT (7) /* inode is committing unstable writes */
static inline struct nfs_inode *NFS_I(const struct inode *inode)
{
#define NFS_CAP_ATIME (1U << 11)
#define NFS_CAP_CTIME (1U << 12)
#define NFS_CAP_MTIME (1U << 13)
+#define NFS_CAP_POSIX_LOCK (1U << 14)
/* maximum number of slots to use */
PCG_CACHE, /* charged as cache */
PCG_USED, /* this object is in use. */
PCG_ACCT_LRU, /* page has been accounted for */
+ PCG_FILE_MAPPED, /* page is accounted as "mapped" */
};
#define TESTPCGFLAG(uname, lname) \
TESTPCGFLAG(AcctLRU, ACCT_LRU)
TESTCLEARPCGFLAG(AcctLRU, ACCT_LRU)
+
+SETPCGFLAG(FileMapped, FILE_MAPPED)
+CLEARPCGFLAG(FileMapped, FILE_MAPPED)
+TESTPCGFLAG(FileMapped, FILE_MAPPED)
+
static inline int page_cgroup_nid(struct page_cgroup *pc)
{
return page_to_nid(pc->page);
#define __LINUX_PERCPU_H
#include <linux/preempt.h>
-#include <linux/slab.h> /* For kmalloc() */
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/pfn.h>
+#include <linux/init.h>
#include <asm/percpu.h>
#define per_cpu_ptr(ptr, cpu) SHIFT_PERCPU_PTR((ptr), per_cpu_offset((cpu)))
extern void __percpu *__alloc_reserved_percpu(size_t size, size_t align);
-extern void __percpu *__alloc_percpu(size_t size, size_t align);
-extern void free_percpu(void __percpu *__pdata);
-extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
+extern bool is_kernel_percpu_address(unsigned long addr);
#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA
extern void __init setup_per_cpu_areas(void);
#define per_cpu_ptr(ptr, cpu) ({ (void)(cpu); (ptr); })
-static inline void __percpu *__alloc_percpu(size_t size, size_t align)
+/* can't distinguish from other static vars, always false */
+static inline bool is_kernel_percpu_address(unsigned long addr)
{
- /*
- * Can't easily make larger alignment work with kmalloc. WARN
- * on it. Larger alignment should only be used for module
- * percpu sections on SMP for which this path isn't used.
- */
- WARN_ON_ONCE(align > SMP_CACHE_BYTES);
- return kzalloc(size, GFP_KERNEL);
-}
-
-static inline void free_percpu(void __percpu *p)
-{
- kfree(p);
-}
-
-static inline phys_addr_t per_cpu_ptr_to_phys(void *addr)
-{
- return __pa(addr);
+ return false;
}
static inline void __init setup_per_cpu_areas(void) { }
#endif /* CONFIG_SMP */
+extern void __percpu *__alloc_percpu(size_t size, size_t align);
+extern void free_percpu(void __percpu *__pdata);
+extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
+
#define alloc_percpu(type) \
(typeof(type) __percpu *)__alloc_percpu(sizeof(type), __alignof__(type))
extern void __perf_sw_event(u32, u64, int, struct pt_regs *, u64);
-static inline void
-perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
-{
- if (atomic_read(&perf_swevent_enabled[event_id]))
- __perf_sw_event(event_id, nr, nmi, regs, addr);
-}
-
extern void
perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip);
return perf_arch_fetch_caller_regs(regs, ip, skip);
}
+static inline void
+perf_sw_event(u32 event_id, u64 nr, int nmi, struct pt_regs *regs, u64 addr)
+{
+ if (atomic_read(&perf_swevent_enabled[event_id])) {
+ struct pt_regs hot_regs;
+
+ if (!regs) {
+ perf_fetch_caller_regs(&hot_regs, 1);
+ regs = &hot_regs;
+ }
+ __perf_sw_event(event_id, nr, nmi, regs, addr);
+ }
+}
+
extern void __perf_event_mmap(struct vm_area_struct *vma);
static inline void perf_event_mmap(struct vm_area_struct *vma)
#define POISON_FREE 0x6b /* for use-after-free poisoning */
#define POISON_END 0xa5 /* end-byte of poisoning */
+/********** mm/hugetlb.c **********/
+/*
+ * Private mappings of hugetlb pages use this poisoned value for
+ * page->mapping. The core VM should not be doing anything with this mapping
+ * but futex requires the existence of some page->mapping value even though it
+ * is unused if PAGE_MAPPING_ANON is set.
+ */
+#define HUGETLB_POISON ((void *)(0x00300300 + POISON_POINTER_DELTA + PAGE_MAPPING_ANON))
+
/********** arch/$ARCH/mm/init.c **********/
#define POISON_FREE_INITMEM 0xcc
* (Note, rcu_assign_pointer and rcu_dereference are not needed to control
* access to data items when inserting into or looking up from the radix tree)
*
+ * Note that the value returned by radix_tree_tag_get() may not be relied upon
+ * if only the RCU read lock is held. Functions to set/clear tags and to
+ * delete nodes running concurrently with it may affect its result such that
+ * two consecutive reads in the same locked section may return different
+ * values. If reliability is required, modification functions must also be
+ * excluded from concurrency.
+ *
* radix_tree_tagged is able to be called without locking or RCU.
*/
# define rcu_read_release_sched() \
lock_release(&rcu_sched_lock_map, 1, _THIS_IP_)
-static inline int debug_lockdep_rcu_enabled(void)
-{
- return likely(rcu_scheduler_active && debug_locks);
-}
+extern int debug_lockdep_rcu_enabled(void);
/**
* rcu_read_lock_held - might we be in RCU read-side critical section?
return lock_is_held(&rcu_lock_map);
}
-/**
- * rcu_read_lock_bh_held - might we be in RCU-bh read-side critical section?
- *
- * If CONFIG_PROVE_LOCKING is selected and enabled, returns nonzero iff in
- * an RCU-bh read-side critical section. In absence of CONFIG_PROVE_LOCKING,
- * this assumes we are in an RCU-bh read-side critical section unless it can
- * prove otherwise.
- *
- * Check rcu_scheduler_active to prevent false positives during boot.
+/*
+ * rcu_read_lock_bh_held() is defined out of line to avoid #include-file
+ * hell.
*/
-static inline int rcu_read_lock_bh_held(void)
-{
- if (!debug_lockdep_rcu_enabled())
- return 1;
- return lock_is_held(&rcu_bh_lock_map);
-}
+extern int rcu_read_lock_bh_held(void);
/**
* rcu_read_lock_sched_held - might we be in RCU-sched read-side critical section?
return 1;
if (debug_locks)
lockdep_opinion = lock_is_held(&rcu_sched_lock_map);
- return lockdep_opinion || preempt_count() != 0;
+ return lockdep_opinion || preempt_count() != 0 || irqs_disabled();
}
#else /* #ifdef CONFIG_PREEMPT */
static inline int rcu_read_lock_sched_held(void)
#ifdef CONFIG_PREEMPT
static inline int rcu_read_lock_sched_held(void)
{
- return !rcu_scheduler_active || preempt_count() != 0;
+ return !rcu_scheduler_active || preempt_count() != 0 || irqs_disabled();
}
#else /* #ifdef CONFIG_PREEMPT */
static inline int rcu_read_lock_sched_held(void)
#ifdef CONFIG_PROVE_RCU
+extern int rcu_my_thread_group_empty(void);
+
/**
* rcu_dereference_check - rcu_dereference with debug checking
+ * @p: The pointer to read, prior to dereferencing
+ * @c: The conditions under which the dereference will take place
*
- * Do an rcu_dereference(), but check that the context is correct.
- * For example, rcu_dereference_check(gp, rcu_read_lock_held()) to
- * ensure that the rcu_dereference_check() executes within an RCU
- * read-side critical section. It is also possible to check for
- * locks being held, for example, by using lockdep_is_held().
+ * Do an rcu_dereference(), but check that the conditions under which the
+ * dereference will take place are correct. Typically the conditions indicate
+ * the various locking conditions that should be held at that point. The check
+ * should return true if the conditions are satisfied.
+ *
+ * For example:
+ *
+ * bar = rcu_dereference_check(foo->bar, rcu_read_lock_held() ||
+ * lockdep_is_held(&foo->lock));
+ *
+ * could be used to indicate to lockdep that foo->bar may only be dereferenced
+ * if either the RCU read lock is held, or that the lock required to replace
+ * the bar struct at foo->bar is held.
+ *
+ * Note that the list of conditions may also include indications of when a lock
+ * need not be held, for example during initialisation or destruction of the
+ * target struct:
+ *
+ * bar = rcu_dereference_check(foo->bar, rcu_read_lock_held() ||
+ * lockdep_is_held(&foo->lock) ||
+ * atomic_read(&foo->usage) == 0);
*/
#define rcu_dereference_check(p, c) \
({ \
rcu_dereference_raw(p); \
})
+/**
+ * rcu_dereference_protected - fetch RCU pointer when updates prevented
+ *
+ * Return the value of the specified RCU-protected pointer, but omit
+ * both the smp_read_barrier_depends() and the ACCESS_ONCE(). This
+ * is useful in cases where update-side locks prevent the value of the
+ * pointer from changing. Please note that this primitive does -not-
+ * prevent the compiler from repeating this reference or combining it
+ * with other references, so it should not be used without protection
+ * of appropriate locks.
+ */
+#define rcu_dereference_protected(p, c) \
+ ({ \
+ if (debug_lockdep_rcu_enabled() && !(c)) \
+ lockdep_rcu_dereference(__FILE__, __LINE__); \
+ (p); \
+ })
+
#else /* #ifdef CONFIG_PROVE_RCU */
#define rcu_dereference_check(p, c) rcu_dereference_raw(p)
+#define rcu_dereference_protected(p, c) (p)
#endif /* #else #ifdef CONFIG_PROVE_RCU */
+/**
+ * rcu_access_pointer - fetch RCU pointer with no dereferencing
+ *
+ * Return the value of the specified RCU-protected pointer, but omit the
+ * smp_read_barrier_depends() and keep the ACCESS_ONCE(). This is useful
+ * when the value of this pointer is accessed, but the pointer is not
+ * dereferenced, for example, when testing an RCU-protected pointer against
+ * NULL. This may also be used in cases where update-side locks prevent
+ * the value of the pointer from changing, but rcu_dereference_protected()
+ * is a lighter-weight primitive for this use case.
+ */
+#define rcu_access_pointer(p) ACCESS_ONCE(p)
+
/**
* rcu_read_lock - mark the beginning of an RCU read-side critical section.
*
{
/* Nothing except the stubbed out regulator API should be
* looking at the value except to check if it is an error
- * value so the actual return value doesn't matter.
+ * value. Drivers are free to handle NULL specifically by
+ * skipping all regulator API calls, but they don't have to.
+ * Drivers which don't, should make sure they properly handle
+ * corner cases of the API, such as regulator_get_voltage()
+ * returning 0.
*/
- return (struct regulator *)id;
+ return NULL;
}
static inline void regulator_put(struct regulator *regulator)
{
void reiserfs_security_free(struct reiserfs_security_handle *sec);
#endif
+static inline int reiserfs_xattrs_initialized(struct super_block *sb)
+{
+ return REISERFS_SB(sb)->priv_root != NULL;
+}
+
#define xattr_size(size) ((size) + sizeof(struct reiserfs_xattr_header))
static inline loff_t reiserfs_xattr_nblocks(struct inode *inode, loff_t size)
{
#include <linux/sched.h>
#include <linux/key.h>
#include <linux/xfrm.h>
-#include <linux/gfp.h>
+#include <linux/slab.h>
#include <net/flow.h>
/* Maximum number of letters for an LSM name string */
atomic_t dataref;
unsigned short nr_frags;
unsigned short gso_size;
-#ifdef CONFIG_HAS_DMA
- dma_addr_t dma_head;
-#endif
/* Warning: this field is not always filled in (UFO)! */
unsigned short gso_segs;
unsigned short gso_type;
struct sk_buff *frag_list;
struct skb_shared_hwtstamps hwtstamps;
skb_frag_t frags[MAX_SKB_FRAGS];
-#ifdef CONFIG_HAS_DMA
- dma_addr_t dma_maps[MAX_SKB_FRAGS];
-#endif
/* Intermediate layers must ensure that destructor_arg
* remains valid until skb destructor */
void * destructor_arg;
void kmem_cache_free(struct kmem_cache *, void *);
unsigned int kmem_cache_size(struct kmem_cache *);
const char *kmem_cache_name(struct kmem_cache *);
+int kern_ptr_validate(const void *ptr, unsigned long size);
int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
/*
#define _SMB_FS_SB
#include <linux/types.h>
+#include <linux/backing-dev.h>
#include <linux/smb.h>
/*
struct smb_ops *ops;
struct super_block *super_block;
+
+ struct backing_dev_info bdi;
};
static inline int
#define MSG_ERRQUEUE 0x2000 /* Fetch message from error queue */
#define MSG_NOSIGNAL 0x4000 /* Do not generate SIGPIPE */
#define MSG_MORE 0x8000 /* Sender will send more */
+#define MSG_WAITFORONE 0x10000 /* recvmmsg(): block until 1+ packets avail */
#define MSG_EOF MSG_FIN
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
/*
* INTERFACES between SPI master-side drivers and SPI infrastructure.
void xprt_free_bc_request(struct rpc_rqst *req);
int xprt_setup_backchannel(struct rpc_xprt *, unsigned int min_reqs);
void xprt_destroy_backchannel(struct rpc_xprt *, int max_reqs);
-void bc_release_request(struct rpc_task *);
int bc_send(struct rpc_rqst *req);
/*
{
return 0;
}
+
+static inline void xprt_free_bc_request(struct rpc_rqst *req)
+{
+}
#endif /* CONFIG_NFS_V4_1 */
#endif /* _LINUX_SUNRPC_BC_XPRT_H */
asmlinkage long sys_shmget(key_t key, size_t size, int flag);
asmlinkage long sys_shmdt(char __user *shmaddr);
asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
-asmlinkage long sys_ipc(unsigned int call, int first, int second,
+asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
unsigned long third, void __user *ptr, long fifth);
asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
#include <linux/taskstats.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#ifdef CONFIG_TASKSTATS
extern struct kmem_cache *taskstats_cache;
void **it_func; \
\
rcu_read_lock_sched_notrace(); \
- it_func = rcu_dereference((tp)->funcs); \
+ it_func = rcu_dereference_sched((tp)->funcs); \
if (it_func) { \
do { \
((void(*)(proto))(*it_func))(args); \
* Alternatively, drivers may pass the URB_NO_xxx_DMA_MAP transfer flags,
* which tell the host controller driver that no such mapping is needed since
* the device driver is DMA-aware. For example, a device driver might
- * allocate a DMA buffer with usb_buffer_alloc() or call usb_buffer_map().
+ * allocate a DMA buffer with usb_alloc_coherent() or call usb_buffer_map().
* When these transfer flags are provided, host controller drivers will
* attempt to use the dma addresses found in the transfer_dma and/or
* setup_dma fields rather than determining a dma address themselves.
return (urb->transfer_flags & URB_DIR_MASK) == URB_DIR_OUT;
}
-void *usb_buffer_alloc(struct usb_device *dev, size_t size,
+void *usb_alloc_coherent(struct usb_device *dev, size_t size,
gfp_t mem_flags, dma_addr_t *dma);
-void usb_buffer_free(struct usb_device *dev, size_t size,
+void usb_free_coherent(struct usb_device *dev, size_t size,
void *addr, dma_addr_t dma);
+/* Compatible macros while we switch over */
+static inline void *usb_buffer_alloc(struct usb_device *dev, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma)
+{
+ return usb_alloc_coherent(dev, size, mem_flags, dma);
+}
+static inline void usb_buffer_free(struct usb_device *dev, size_t size,
+ void *addr, dma_addr_t dma)
+{
+ return usb_free_coherent(dev, size, addr, dma);
+}
+
#if 0
struct urb *usb_buffer_map(struct urb *urb);
void usb_buffer_dmasync(struct urb *urb);
#ifndef __LINUX_USB_GADGET_H
#define __LINUX_USB_GADGET_H
+#include <linux/slab.h>
+
struct usb_ep;
/**
/* Feature bits */
#define VIRTIO_CONSOLE_F_SIZE 0 /* Does host provide console size? */
-#define VIRTIO_CONSOLE_F_MULTIPORT 1 /* Does host provide multiple ports? */
struct virtio_console_config {
/* colums of the screens */
__u16 cols;
/* rows of the screens */
__u16 rows;
- /* max. number of ports this device can hold */
- __u32 max_nr_ports;
- /* number of ports added so far */
- __u32 nr_ports;
} __attribute__((packed));
-/*
- * A message that's passed between the Host and the Guest for a
- * particular port.
- */
-struct virtio_console_control {
- __u32 id; /* Port number */
- __u16 event; /* The kind of control event (see below) */
- __u16 value; /* Extra information for the key */
-};
-
-/* Some events for control messages */
-#define VIRTIO_CONSOLE_PORT_READY 0
-#define VIRTIO_CONSOLE_CONSOLE_PORT 1
-#define VIRTIO_CONSOLE_RESIZE 2
-#define VIRTIO_CONSOLE_PORT_OPEN 3
-#define VIRTIO_CONSOLE_PORT_NAME 4
-#define VIRTIO_CONSOLE_PORT_REMOVE 5
-
#ifdef __KERNEL__
int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int));
#endif /* __KERNEL__ */
#include <linux/types.h>
#include <linux/device.h>
+#include <linux/slab.h>
/* Backend stuff */
enum writeback_sync_modes sync_mode;
unsigned long *older_than_this; /* If !NULL, only write back inodes
older than this */
+ unsigned long wb_start; /* Time writeback_inodes_wb was
+ called. This is needed to avoid
+ extra jobs and livelock */
long nr_to_write; /* Write this many pages, and decrement
this for each page written */
long pages_skipped; /* Pages which were not written */
void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
struct saa7146_buf *buf);
-int saa7146_vv_devinit(struct saa7146_dev *dev);
int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
int saa7146_vv_release(struct saa7146_dev* dev);
enum p9_trans_status {
Connected,
+ BeginDisconnect,
Disconnected,
Hung,
};
struct p9_client *p9_client_create(const char *dev_name, char *options);
void p9_client_destroy(struct p9_client *clnt);
void p9_client_disconnect(struct p9_client *clnt);
+void p9_client_begin_disconnect(struct p9_client *clnt);
struct p9_fid *p9_client_attach(struct p9_client *clnt, struct p9_fid *afid,
char *uname, u32 n_uname, char *aname);
struct p9_fid *p9_client_auth(struct p9_client *clnt, char *uname,
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#define AX25_T1CLAMPLO 1
extern int bt_sysfs_init(void);
extern void bt_sysfs_cleanup(void);
-extern struct class *bt_class;
+extern struct dentry *bt_debugfs;
#endif /* __BLUETOOTH_H */
#define __NET_FIB_RULES_H
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/fib_rules.h>
#include <net/flow.h>
#include <net/datalink.h>
#include <linux/ipx.h>
#include <linux/list.h>
+#include <linux/slab.h>
struct ipx_address {
__be32 net;
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <asm/debug.h>
/*
#ifndef _NF_CONNTRACK_EXTEND_H
#define _NF_CONNTRACK_EXTEND_H
+#include <linux/slab.h>
+
#include <net/netfilter/nf_conntrack.h>
enum nf_ct_ext_id {
#define _NETLABEL_H
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/in.h>
*/
static inline __be64 nla_get_be64(const struct nlattr *nla)
{
- return *(__be64 *) nla_data(nla);
+ __be64 tmp;
+
+ nla_memcpy(&tmp, nla, sizeof(tmp));
+
+ return tmp;
}
/**
#include <linux/netrom.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/sock.h>
#define NR_NETWORK_LEN 15
SCTP_CMD_T1_RETRAN, /* Mark for retransmission after T1 timeout */
SCTP_CMD_UPDATE_INITTAG, /* Update peer inittag */
SCTP_CMD_SEND_MSG, /* Send the whole use message */
+ SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */
SCTP_CMD_LAST
} sctp_verb_t;
int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb);
int sctp_inet_listen(struct socket *sock, int backlog);
void sctp_write_space(struct sock *sk);
+void sctp_data_ready(struct sock *sk, int len);
unsigned int sctp_poll(struct file *file, struct socket *sock,
poll_table *wait);
void sctp_sock_rfree(struct sk_buff *skb);
struct iovec *data);
void sctp_chunk_free(struct sctp_chunk *);
void *sctp_addto_chunk(struct sctp_chunk *, int len, const void *data);
+void *sctp_addto_chunk_fixed(struct sctp_chunk *, int len, const void *data);
struct sctp_chunk *sctp_chunkify(struct sk_buff *,
const struct sctp_association *,
struct sock *);
#include <linux/skbuff.h> /* struct sk_buff */
#include <linux/mm.h>
#include <linux/security.h>
+#include <linux/slab.h>
#include <linux/filter.h>
#include <linux/rculist_nulls.h>
printk(KERN_DEBUG msg); } while (0)
#else
/* Validate arguments and do nothing */
-static void inline int __attribute__ ((format (printf, 2, 3)))
+static inline void __attribute__ ((format (printf, 2, 3)))
SOCK_DEBUG(struct sock *sk, const char *msg, ...)
{
}
#ifndef _X25_H
#define _X25_H
#include <linux/x25.h>
+#include <linux/slab.h>
#include <net/sock.h>
#define X25_ADDR_LEN 16
extern int sysctl_x25_ack_holdback_timeout;
extern int sysctl_x25_forward;
+extern int x25_parse_address_block(struct sk_buff *skb,
+ struct x25_address *called_addr,
+ struct x25_address *calling_addr);
+
extern int x25_addr_ntoa(unsigned char *, struct x25_address *,
struct x25_address *);
extern int x25_addr_aton(unsigned char *, struct x25_address *,
#include <linux/in6.h>
#include <linux/mutex.h>
#include <linux/audit.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/dst.h>
#ifdef __KERNEL__
#include <linux/device.h>
#include <pcmcia/ss.h>
+#include <asm/atomic.h>
/*
* PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus
config_req_t conf;
window_handle_t win;
- /* Is the device suspended, or in the process of
- * being removed? */
+ /* Is the device suspended? */
u16 suspended:1;
- u16 _removed:1;
/* Flags whether io, irq, win configurations were
* requested, and whether the configuration is "locked" */
u16 has_card_id:1;
u16 has_func_id:1;
- u16 reserved:3;
+ u16 reserved:4;
u8 func_id;
u16 manf_id;
/* 16-bit state: */
struct {
- /* PCMCIA card is present in socket */
- u8 present:1;
/* "master" ioctl is used */
u8 busy:1;
- /* pcmcia module is being unloaded */
- u8 dead:1;
/* the PCMCIA card consists of two pseudo devices */
u8 has_pfc:1;
- u8 reserved:4;
+ u8 reserved:6;
} pcmcia_state;
+ /* non-zero if PCMCIA card is present */
+ atomic_t present;
#ifdef CONFIG_PCMCIA_IOCTL
struct user_info_t *user;
#endif
-/* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev);
-extern void pcmcia_socket_dev_early_resume(struct device *dev);
-extern void pcmcia_socket_dev_late_resume(struct device *dev);
-extern int pcmcia_socket_dev_resume(struct device *dev);
-
/* socket drivers use this callback in their IRQ handler */
extern void pcmcia_parse_events(struct pcmcia_socket *socket,
unsigned int events);
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_transport_sas.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
struct block_device;
int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
ak4113_write_t *write,
- const unsigned char pgm[AK4113_WRITABLE_REGS],
+ const unsigned char *pgm,
void *private_data, struct ak4113 **r_ak4113);
void snd_ak4113_reg_write(struct ak4113 *ak4113, unsigned char reg,
unsigned char mask, unsigned char val);
struct snd_soc_codec *codec;
unsigned int active;
unsigned char pop_wait:1;
- void *dma_data;
/* DAI private data */
void *private_data;
struct list_head list;
};
+static inline void *snd_soc_dai_get_dma_data(const struct snd_soc_dai *dai,
+ const struct snd_pcm_substream *ss)
+{
+ return (ss->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+ dai->playback.dma_data : dai->capture.dma_data;
+}
+
+static inline void snd_soc_dai_set_dma_data(struct snd_soc_dai *dai,
+ const struct snd_pcm_substream *ss,
+ void *data)
+{
+ if (ss->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dai->playback.dma_data = data;
+ else
+ dai->capture.dma_data = data;
+}
+
#endif
unsigned int channels_min; /* min channels */
unsigned int channels_max; /* max channels */
unsigned int active:1; /* stream is in use */
+ void *dma_data; /* used by platform code */
};
/* SoC audio ops */
__entry->nr_sector, __entry->errors)
);
+/**
+ * block_rq_abort - abort block operation request
+ * @q: queue containing the block operation request
+ * @rq: block IO operation request
+ *
+ * Called immediately after pending block IO operation request @rq in
+ * queue @q is aborted. The fields in the operation request @rq
+ * can be examined to determine which device and sectors the pending
+ * operation would access.
+ */
DEFINE_EVENT(block_rq_with_error, block_rq_abort,
TP_PROTO(struct request_queue *q, struct request *rq),
TP_ARGS(q, rq)
);
+/**
+ * block_rq_requeue - place block IO request back on a queue
+ * @q: queue holding operation
+ * @rq: block IO operation request
+ *
+ * The block operation request @rq is being placed back into queue
+ * @q. For some reason the request was not completed and needs to be
+ * put back in the queue.
+ */
DEFINE_EVENT(block_rq_with_error, block_rq_requeue,
TP_PROTO(struct request_queue *q, struct request *rq),
TP_ARGS(q, rq)
);
+/**
+ * block_rq_complete - block IO operation completed by device driver
+ * @q: queue containing the block operation request
+ * @rq: block operations request
+ *
+ * The block_rq_complete tracepoint event indicates that some portion
+ * of operation request has been completed by the device driver. If
+ * the @rq->bio is %NULL, then there is absolutely no additional work to
+ * do for the request. If @rq->bio is non-NULL then there is
+ * additional work required to complete the request.
+ */
DEFINE_EVENT(block_rq_with_error, block_rq_complete,
TP_PROTO(struct request_queue *q, struct request *rq),
__entry->nr_sector, __entry->comm)
);
+/**
+ * block_rq_insert - insert block operation request into queue
+ * @q: target queue
+ * @rq: block IO operation request
+ *
+ * Called immediately before block operation request @rq is inserted
+ * into queue @q. The fields in the operation request @rq struct can
+ * be examined to determine which device and sectors the pending
+ * operation would access.
+ */
DEFINE_EVENT(block_rq, block_rq_insert,
TP_PROTO(struct request_queue *q, struct request *rq),
TP_ARGS(q, rq)
);
+/**
+ * block_rq_issue - issue pending block IO request operation to device driver
+ * @q: queue holding operation
+ * @rq: block IO operation operation request
+ *
+ * Called when block operation request @rq from queue @q is sent to a
+ * device driver for processing.
+ */
DEFINE_EVENT(block_rq, block_rq_issue,
TP_PROTO(struct request_queue *q, struct request *rq),
TP_ARGS(q, rq)
);
+/**
+ * block_bio_bounce - used bounce buffer when processing block operation
+ * @q: queue holding the block operation
+ * @bio: block operation
+ *
+ * A bounce buffer was used to handle the block operation @bio in @q.
+ * This occurs when hardware limitations prevent a direct transfer of
+ * data between the @bio data memory area and the IO device. Use of a
+ * bounce buffer requires extra copying of data and decreases
+ * performance.
+ */
TRACE_EVENT(block_bio_bounce,
TP_PROTO(struct request_queue *q, struct bio *bio),
__entry->nr_sector, __entry->comm)
);
+/**
+ * block_bio_complete - completed all work on the block operation
+ * @q: queue holding the block operation
+ * @bio: block operation completed
+ *
+ * This tracepoint indicates there is no further work to do on this
+ * block IO operation @bio.
+ */
TRACE_EVENT(block_bio_complete,
TP_PROTO(struct request_queue *q, struct bio *bio),
__entry->nr_sector, __entry->comm)
);
+/**
+ * block_bio_backmerge - merging block operation to the end of an existing operation
+ * @q: queue holding operation
+ * @bio: new block operation to merge
+ *
+ * Merging block request @bio to the end of an existing block request
+ * in queue @q.
+ */
DEFINE_EVENT(block_bio, block_bio_backmerge,
TP_PROTO(struct request_queue *q, struct bio *bio),
TP_ARGS(q, bio)
);
+/**
+ * block_bio_frontmerge - merging block operation to the beginning of an existing operation
+ * @q: queue holding operation
+ * @bio: new block operation to merge
+ *
+ * Merging block IO operation @bio to the beginning of an existing block
+ * operation in queue @q.
+ */
DEFINE_EVENT(block_bio, block_bio_frontmerge,
TP_PROTO(struct request_queue *q, struct bio *bio),
TP_ARGS(q, bio)
);
+/**
+ * block_bio_queue - putting new block IO operation in queue
+ * @q: queue holding operation
+ * @bio: new block operation
+ *
+ * About to place the block IO operation @bio into queue @q.
+ */
DEFINE_EVENT(block_bio, block_bio_queue,
TP_PROTO(struct request_queue *q, struct bio *bio),
__entry->nr_sector, __entry->comm)
);
+/**
+ * block_getrq - get a free request entry in queue for block IO operations
+ * @q: queue for operations
+ * @bio: pending block IO operation
+ * @rw: low bit indicates a read (%0) or a write (%1)
+ *
+ * A request struct for queue @q has been allocated to handle the
+ * block IO operation @bio.
+ */
DEFINE_EVENT(block_get_rq, block_getrq,
TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
TP_ARGS(q, bio, rw)
);
+/**
+ * block_sleeprq - waiting to get a free request entry in queue for block IO operation
+ * @q: queue for operation
+ * @bio: pending block IO operation
+ * @rw: low bit indicates a read (%0) or a write (%1)
+ *
+ * In the case where a request struct cannot be provided for queue @q
+ * the process needs to wait for an request struct to become
+ * available. This tracepoint event is generated each time the
+ * process goes to sleep waiting for request struct become available.
+ */
DEFINE_EVENT(block_get_rq, block_sleeprq,
TP_PROTO(struct request_queue *q, struct bio *bio, int rw),
TP_ARGS(q, bio, rw)
);
+/**
+ * block_plug - keep operations requests in request queue
+ * @q: request queue to plug
+ *
+ * Plug the request queue @q. Do not allow block operation requests
+ * to be sent to the device driver. Instead, accumulate requests in
+ * the queue to improve throughput performance of the block device.
+ */
TRACE_EVENT(block_plug,
TP_PROTO(struct request_queue *q),
TP_printk("[%s] %d", __entry->comm, __entry->nr_rq)
);
+/**
+ * block_unplug_timer - timed release of operations requests in queue to device driver
+ * @q: request queue to unplug
+ *
+ * Unplug the request queue @q because a timer expired and allow block
+ * operation requests to be sent to the device driver.
+ */
DEFINE_EVENT(block_unplug, block_unplug_timer,
TP_PROTO(struct request_queue *q),
TP_ARGS(q)
);
+/**
+ * block_unplug_io - release of operations requests in request queue
+ * @q: request queue to unplug
+ *
+ * Unplug request queue @q because device driver is scheduled to work
+ * on elements in the request queue.
+ */
DEFINE_EVENT(block_unplug, block_unplug_io,
TP_PROTO(struct request_queue *q),
TP_ARGS(q)
);
+/**
+ * block_split - split a single bio struct into two bio structs
+ * @q: queue containing the bio
+ * @bio: block operation being split
+ * @new_sector: The starting sector for the new bio
+ *
+ * The bio request @bio in request queue @q needs to be split into two
+ * bio requests. The newly created @bio request starts at
+ * @new_sector. This split may be required due to hardware limitation
+ * such as operation crossing device boundaries in a RAID system.
+ */
TRACE_EVENT(block_split,
TP_PROTO(struct request_queue *q, struct bio *bio,
__entry->comm)
);
+/**
+ * block_remap - map request for a partition to the raw device
+ * @q: queue holding the operation
+ * @bio: revised operation
+ * @dev: device for the operation
+ * @from: original sector for the operation
+ *
+ * An operation for a partition on a block device has been mapped to the
+ * raw block device.
+ */
TRACE_EVENT(block_remap,
TP_PROTO(struct request_queue *q, struct bio *bio, dev_t dev,
(unsigned long long)__entry->old_sector)
);
+/**
+ * block_rq_remap - map request for a block operation request
+ * @q: queue holding the operation
+ * @rq: block IO operation request
+ * @dev: device for the operation
+ * @from: original sector for the operation
+ *
+ * The block operation request @rq in @q has been remapped. The block
+ * operation request @rq holds the current information and @from hold
+ * the original sector.
+ */
TRACE_EVENT(block_rq_remap,
TP_PROTO(struct request_queue *q, struct request *rq, dev_t dev,
#include <linux/mutex.h>
#include <linux/completion.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <xen/interface/xen.h>
#include <xen/interface/grant_table.h>
#include <xen/interface/io/xenbus.h>
#include <linux/initrd.h>
#include <linux/async.h>
#include <linux/fs_struct.h>
+#include <linux/slab.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_fs_sb.h>
#include <linux/cramfs_fs.h>
#include <linux/initrd.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include "do_mounts.h"
#include "../fs/squashfs/squashfs_fs.h"
compress_name);
message = msg_buf;
}
- }
+ } else
+ error("junk in compressed archive");
if (state != Reset)
error("junk in compressed archive");
this_header = saved_offset + my_inptr;
#include <linux/bootmem.h>
#include <linux/acpi.h>
#include <linux/tty.h>
-#include <linux/gfp.h>
#include <linux/percpu.h>
#include <linux/kmod.h>
#include <linux/vmalloc.h>
#include <linux/kmemtrace.h>
#include <linux/sfi.h>
#include <linux/shmem_fs.h>
+#include <linux/slab.h>
#include <trace/boot.h>
#include <asm/io.h>
/*
* init can allocate pages on any node
*/
- set_mems_allowed(node_possible_map);
+ set_mems_allowed(node_states[N_HIGH_MEMORY]);
/*
* init can run on any cpu.
*/
#include <linux/init.h>
#include <linux/msg.h>
#include <linux/shm.h>
-#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/mutex.h>
#include <linux/nsproxy.h>
#include <linux/pid.h>
#include <linux/ipc_namespace.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include "util.h"
*/
#include <linux/capability.h>
-#include <linux/slab.h>
#include <linux/msg.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/syscalls.h>
#include <linux/uaccess.h>
-SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second,
+SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second,
unsigned long, third, void __user *, ptr, long, fifth)
{
int version, ret;
#include <linux/init.h>
#include <linux/kthread.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
static async_cookie_t next_cookie = 1;
#include <asm/atomic.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/kthread.h>
#include <linux/namei.h>
#include <linux/mount.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
struct audit_tree;
struct audit_chunk;
#include <linux/namei.h>
#include <linux/netlink.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/inotify.h>
#include <linux/security.h>
#include "audit.h"
#include <linux/namei.h>
#include <linux/netlink.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/security.h>
#include "audit.h"
#include <linux/namei.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/mount.h>
#include <linux/socket.h>
#include <linux/mqueue.h>
{
if (context->name_count >= AUDIT_NAMES) {
if (inode)
- printk(KERN_DEBUG "name_count maxed, losing inode data: "
+ printk(KERN_DEBUG "audit: name_count maxed, losing inode data: "
"dev=%02x:%02x, inode=%lu\n",
MAJOR(inode->i_sb->s_dev),
MINOR(inode->i_sb->s_dev),
*/
#include <linux/cgroup.h>
-#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/errno.h>
#include <linux/fs.h>
int cgroup_path(const struct cgroup *cgrp, char *buf, int buflen)
{
char *start;
- struct dentry *dentry = rcu_dereference(cgrp->dentry);
+ struct dentry *dentry = rcu_dereference_check(cgrp->dentry,
+ rcu_read_lock_held() ||
+ cgroup_lock_is_held());
if (!dentry || cgrp == dummytop) {
/*
*--start = '\0';
for (;;) {
int len = dentry->d_name.len;
+
if ((start -= len) < buf)
return -ENAMETOOLONG;
- memcpy(start, cgrp->dentry->d_name.name, len);
+ memcpy(start, dentry->d_name.name, len);
cgrp = cgrp->parent;
if (!cgrp)
break;
- dentry = rcu_dereference(cgrp->dentry);
+
+ dentry = rcu_dereference_check(cgrp->dentry,
+ rcu_read_lock_held() ||
+ cgroup_lock_is_held());
if (!cgrp->parent)
continue;
if (--start < buf)
{
int subsys_id, i, depth = 0;
struct cgroup_subsys_state *parent_css, *child_css;
- struct css_id *child_id, *parent_id = NULL;
+ struct css_id *child_id, *parent_id;
subsys_id = ss->subsys_id;
parent_css = parent->subsys[subsys_id];
child_css = child->subsys[subsys_id];
- depth = css_depth(parent_css) + 1;
parent_id = parent_css->id;
+ depth = parent_id->depth;
child_id = get_new_cssid(ss, depth);
if (IS_ERR(child_id))
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/cgroup.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
struct freezer, css);
}
-int cgroup_frozen(struct task_struct *task)
+int cgroup_freezing_or_frozen(struct task_struct *task)
{
struct freezer *freezer;
enum freezer_state state;
task_lock(task);
freezer = task_freezer(task);
- state = freezer->state;
+ if (!freezer->css.cgroup->parent)
+ state = CGROUP_THAWED; /* root cgroup can't be frozen */
+ else
+ state = freezer->state;
task_unlock(task);
- return state == CGROUP_FROZEN;
+ return (state == CGROUP_FREEZING) || (state == CGROUP_FROZEN);
}
/*
* No lock is needed, since the task isn't on tasklist yet,
* so it can't be moved to another cgroup, which means the
* freezer won't be removed and will be valid during this
- * function call.
+ * function call. Nevertheless, apply RCU read-side critical
+ * section to suppress RCU lockdep false positives.
*/
+ rcu_read_lock();
freezer = task_freezer(task);
+ rcu_read_unlock();
/*
* The root cgroup is non-freezable, so we can skip the
#include <linux/posix-timers.h>
#include <linux/times.h>
#include <linux/ptrace.h>
+#include <linux/gfp.h>
#include <asm/uaccess.h>
#include <linux/kthread.h>
#include <linux/stop_machine.h>
#include <linux/mutex.h>
+#include <linux/gfp.h>
#ifdef CONFIG_SMP
/* Serializes the updates to cpu_online_mask, cpu_present_mask */
* call to guarantee_online_mems(), as we know no one is changing
* our task's cpuset.
*
- * Hold callback_mutex around the two modifications of our tasks
- * mems_allowed to synchronize with cpuset_mems_allowed().
- *
* While the mm_struct we are migrating is typically from some
* other task, the task_struct mems_allowed that we are hacking
* is for our current task, which must allocate new pages for that
struct cpuset *cs;
int migrate;
const nodemask_t *oldmem = scan->data;
- nodemask_t newmems;
+ NODEMASK_ALLOC(nodemask_t, newmems, GFP_KERNEL);
+
+ if (!newmems)
+ return;
cs = cgroup_cs(scan->cg);
- guarantee_online_mems(cs, &newmems);
+ guarantee_online_mems(cs, newmems);
task_lock(p);
- cpuset_change_task_nodemask(p, &newmems);
+ cpuset_change_task_nodemask(p, newmems);
task_unlock(p);
+ NODEMASK_FREE(newmems);
+
mm = get_task_mm(p);
if (!mm)
return;
static int update_nodemask(struct cpuset *cs, struct cpuset *trialcs,
const char *buf)
{
- nodemask_t oldmem;
+ NODEMASK_ALLOC(nodemask_t, oldmem, GFP_KERNEL);
int retval;
struct ptr_heap heap;
+ if (!oldmem)
+ return -ENOMEM;
+
/*
* top_cpuset.mems_allowed tracks node_stats[N_HIGH_MEMORY];
* it's read-only
*/
- if (cs == &top_cpuset)
- return -EACCES;
+ if (cs == &top_cpuset) {
+ retval = -EACCES;
+ goto done;
+ }
/*
* An empty mems_allowed is ok iff there are no tasks in the cpuset.
goto done;
if (!nodes_subset(trialcs->mems_allowed,
- node_states[N_HIGH_MEMORY]))
- return -EINVAL;
+ node_states[N_HIGH_MEMORY])) {
+ retval = -EINVAL;
+ goto done;
+ }
}
- oldmem = cs->mems_allowed;
- if (nodes_equal(oldmem, trialcs->mems_allowed)) {
+ *oldmem = cs->mems_allowed;
+ if (nodes_equal(*oldmem, trialcs->mems_allowed)) {
retval = 0; /* Too easy - nothing to do */
goto done;
}
cs->mems_allowed = trialcs->mems_allowed;
mutex_unlock(&callback_mutex);
- update_tasks_nodemask(cs, &oldmem, &heap);
+ update_tasks_nodemask(cs, oldmem, &heap);
heap_free(&heap);
done:
+ NODEMASK_FREE(oldmem);
return retval;
}
struct cgroup *oldcont, struct task_struct *tsk,
bool threadgroup)
{
- nodemask_t from, to;
struct mm_struct *mm;
struct cpuset *cs = cgroup_cs(cont);
struct cpuset *oldcs = cgroup_cs(oldcont);
+ NODEMASK_ALLOC(nodemask_t, from, GFP_KERNEL);
+ NODEMASK_ALLOC(nodemask_t, to, GFP_KERNEL);
+
+ if (from == NULL || to == NULL)
+ goto alloc_fail;
if (cs == &top_cpuset) {
cpumask_copy(cpus_attach, cpu_possible_mask);
- to = node_possible_map;
} else {
guarantee_online_cpus(cs, cpus_attach);
- guarantee_online_mems(cs, &to);
}
+ guarantee_online_mems(cs, to);
/* do per-task migration stuff possibly for each in the threadgroup */
- cpuset_attach_task(tsk, &to, cs);
+ cpuset_attach_task(tsk, to, cs);
if (threadgroup) {
struct task_struct *c;
rcu_read_lock();
list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
- cpuset_attach_task(c, &to, cs);
+ cpuset_attach_task(c, to, cs);
}
rcu_read_unlock();
}
/* change mm; only needs to be done once even if threadgroup */
- from = oldcs->mems_allowed;
- to = cs->mems_allowed;
+ *from = oldcs->mems_allowed;
+ *to = cs->mems_allowed;
mm = get_task_mm(tsk);
if (mm) {
- mpol_rebind_mm(mm, &to);
+ mpol_rebind_mm(mm, to);
if (is_memory_migrate(cs))
- cpuset_migrate_mm(mm, &from, &to);
+ cpuset_migrate_mm(mm, from, to);
mmput(mm);
}
+
+alloc_fail:
+ NODEMASK_FREE(from);
+ NODEMASK_FREE(to);
}
/* The various types of files and directories in a cpuset file system */
static int cpuset_sprintf_memlist(char *page, struct cpuset *cs)
{
- nodemask_t mask;
+ NODEMASK_ALLOC(nodemask_t, mask, GFP_KERNEL);
+ int retval;
+
+ if (mask == NULL)
+ return -ENOMEM;
mutex_lock(&callback_mutex);
- mask = cs->mems_allowed;
+ *mask = cs->mems_allowed;
mutex_unlock(&callback_mutex);
- return nodelist_scnprintf(page, PAGE_SIZE, mask);
+ retval = nodelist_scnprintf(page, PAGE_SIZE, *mask);
+
+ NODEMASK_FREE(mask);
+
+ return retval;
}
static ssize_t cpuset_common_file_read(struct cgroup *cont,
struct cpuset *cp; /* scans cpusets being updated */
struct cpuset *child; /* scans child cpusets of cp */
struct cgroup *cont;
- nodemask_t oldmems;
+ NODEMASK_ALLOC(nodemask_t, oldmems, GFP_KERNEL);
+
+ if (oldmems == NULL)
+ return;
list_add_tail((struct list_head *)&root->stack_list, &queue);
nodes_subset(cp->mems_allowed, node_states[N_HIGH_MEMORY]))
continue;
- oldmems = cp->mems_allowed;
+ *oldmems = cp->mems_allowed;
/* Remove offline cpus and mems from this cpuset. */
mutex_lock(&callback_mutex);
remove_tasks_in_empty_cpuset(cp);
else {
update_tasks_cpumask(cp, NULL);
- update_tasks_nodemask(cp, &oldmems, NULL);
+ update_tasks_nodemask(cp, oldmems, NULL);
}
}
+ NODEMASK_FREE(oldmems);
}
/*
static int cpuset_track_online_nodes(struct notifier_block *self,
unsigned long action, void *arg)
{
+ NODEMASK_ALLOC(nodemask_t, oldmems, GFP_KERNEL);
+
+ if (oldmems == NULL)
+ return NOTIFY_DONE;
+
cgroup_lock();
switch (action) {
case MEM_ONLINE:
- case MEM_OFFLINE:
+ *oldmems = top_cpuset.mems_allowed;
mutex_lock(&callback_mutex);
top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
mutex_unlock(&callback_mutex);
- if (action == MEM_OFFLINE)
- scan_for_empty_cpusets(&top_cpuset);
+ update_tasks_nodemask(&top_cpuset, oldmems, NULL);
+ break;
+ case MEM_OFFLINE:
+ /*
+ * needn't update top_cpuset.mems_allowed explicitly because
+ * scan_for_empty_cpusets() will update it.
+ */
+ scan_for_empty_cpusets(&top_cpuset);
break;
default:
break;
}
cgroup_unlock();
+
+ NODEMASK_FREE(oldmems);
return NOTIFY_OK;
}
#endif
*/
#include <linux/module.h>
#include <linux/cred.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/key.h>
#include <linux/keyctl.h>
new = kmem_cache_alloc(cred_jar, GFP_ATOMIC);
if (!new)
- return NULL;
+ goto free_tgcred;
kdebug("prepare_usermodehelper_creds() alloc %p", new);
error:
put_cred(new);
return NULL;
+
+free_tgcred:
+#ifdef CONFIG_KEYS
+ kfree(tgcred);
+#endif
+ return NULL;
}
/*
{
if (cred->magic != CRED_MAGIC)
return true;
- if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
- return true;
#ifdef CONFIG_SECURITY_SELINUX
if (selinux_is_enabled()) {
if ((unsigned long) cred->security < PAGE_SIZE)
struct early_res *r;
int i;
+ if (start == end)
+ return;
+
+ if (WARN_ONCE(start > end, " wrong range [%#llx, %#llx]\n", start, end))
+ return;
+
try_next:
i = find_overlapped_early(start, end);
if (i >= max_early_res)
acct_update_integrals(tsk);
/* sync mm's RSS info before statistics gathering */
- sync_mm_rss(tsk, tsk->mm);
+ if (tsk->mm)
+ sync_mm_rss(tsk, tsk->mm);
group_dead = atomic_dec_and_test(&tsk->signal->live);
if (group_dead) {
hrtimer_cancel(&tsk->signal->real_timer);
p->prev_utime = cputime_zero;
p->prev_stime = cputime_zero;
#endif
+#if defined(SPLIT_RSS_COUNTING)
+ memset(&p->rss_stat, 0, sizeof(p->rss_stat));
+#endif
p->default_timer_slack_ns = current->timer_slack_ns;
if (desc->chip->ack)
desc->chip->ack(irq);
}
+ desc->status |= IRQ_MASKED;
+}
+
+static inline void mask_irq(struct irq_desc *desc, int irq)
+{
+ if (desc->chip->mask) {
+ desc->chip->mask(irq);
+ desc->status |= IRQ_MASKED;
+ }
+}
+
+static inline void unmask_irq(struct irq_desc *desc, int irq)
+{
+ if (desc->chip->unmask) {
+ desc->chip->unmask(irq);
+ desc->status &= ~IRQ_MASKED;
+ }
}
/*
raw_spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
- if (unlikely(desc->status & IRQ_ONESHOT))
- desc->status |= IRQ_MASKED;
- else if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
- desc->chip->unmask(irq);
+ if (!(desc->status & (IRQ_DISABLED | IRQ_ONESHOT)))
+ unmask_irq(desc, irq);
out_unlock:
raw_spin_unlock(&desc->lock);
}
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
desc->status |= IRQ_PENDING;
- if (desc->chip->mask)
- desc->chip->mask(irq);
+ mask_irq(desc, irq);
goto out;
}
irqreturn_t action_ret;
if (unlikely(!action)) {
- desc->chip->mask(irq);
+ mask_irq(desc, irq);
goto out_unlock;
}
if (unlikely((desc->status &
(IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
(IRQ_PENDING | IRQ_MASKED))) {
- desc->chip->unmask(irq);
- desc->status &= ~IRQ_MASKED;
+ unmask_irq(desc, irq);
}
desc->status &= ~IRQ_PENDING;
__set_irq_handler(irq, handle, 0, name);
}
-void __init set_irq_noprobe(unsigned int irq)
+void set_irq_noprobe(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
raw_spin_unlock_irqrestore(&desc->lock, flags);
}
-void __init set_irq_probe(unsigned int irq)
+void set_irq_probe(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
unsigned long flags;
{
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action;
+ unsigned long flags;
if (!desc)
return 0;
if (desc->status & IRQ_NOREQUEST)
return 0;
+ raw_spin_lock_irqsave(&desc->lock, flags);
action = desc->action;
if (action)
if (irqflags & action->flags & IRQF_SHARED)
action = NULL;
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+
return !action;
}
*/
static void irq_finalize_oneshot(unsigned int irq, struct irq_desc *desc)
{
+again:
chip_bus_lock(irq, desc);
raw_spin_lock_irq(&desc->lock);
+
+ /*
+ * Implausible though it may be we need to protect us against
+ * the following scenario:
+ *
+ * The thread is faster done than the hard interrupt handler
+ * on the other CPU. If we unmask the irq line then the
+ * interrupt can come in again and masks the line, leaves due
+ * to IRQ_INPROGRESS and the irq line is masked forever.
+ */
+ if (unlikely(desc->status & IRQ_INPROGRESS)) {
+ raw_spin_unlock_irq(&desc->lock);
+ chip_bus_sync_unlock(irq, desc);
+ cpu_relax();
+ goto again;
+ }
+
if (!(desc->status & IRQ_DISABLED) && (desc->status & IRQ_MASKED)) {
desc->status &= ~IRQ_MASKED;
desc->chip->unmask(irq);
if (new->flags & IRQF_ONESHOT)
desc->status |= IRQ_ONESHOT;
+ /*
+ * Force MSI interrupts to run with interrupts
+ * disabled. The multi vector cards can cause stack
+ * overflows due to nested interrupts when enough of
+ * them are directed to a core and fire at the same
+ * time.
+ */
+ if (desc->msi_desc)
+ new->flags |= IRQF_DISABLED;
+
if (!(desc->status & IRQ_NOAUTOEN)) {
desc->depth = 0;
desc->status &= ~IRQ_DISABLED;
*/
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
*/
#include <linux/irq.h>
+#include <linux/gfp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/interrupt.h>
#include <linux/sched.h> /* for cond_resched */
#include <linux/mm.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <asm/sections.h>
struct pt_regs *linux_regs;
};
+/* Exception state values */
+#define DCPU_WANT_MASTER 0x1 /* Waiting to become a master kgdb cpu */
+#define DCPU_NEXT_MASTER 0x2 /* Transition from one master cpu to another */
+#define DCPU_IS_SLAVE 0x4 /* Slave cpu enter exception */
+#define DCPU_SSTEP 0x8 /* CPU is single stepping */
+
static struct debuggerinfo_struct {
void *debuggerinfo;
struct task_struct *task;
+ int exception_state;
} kgdb_info[NR_CPUS];
/**
/*
* Copy the binary array pointed to by buf into mem. Fix $, #, and
- * 0x7d escaped with 0x7d. Return a pointer to the character after
- * the last byte written.
+ * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
+ * The input buf is overwitten with the result to write to mem.
*/
static int kgdb_ebin2mem(char *buf, char *mem, int count)
{
- int err = 0;
- char c;
+ int size = 0;
+ char *c = buf;
while (count-- > 0) {
- c = *buf++;
- if (c == 0x7d)
- c = *buf++ ^ 0x20;
-
- err = probe_kernel_write(mem, &c, 1);
- if (err)
- break;
-
- mem++;
+ c[size] = *buf++;
+ if (c[size] == 0x7d)
+ c[size] = *buf++ ^ 0x20;
+ size++;
}
- return err;
+ return probe_kernel_write(mem, c, size);
}
/*
return find_task_by_pid_ns(tid, &init_pid_ns);
}
-/*
- * CPU debug state control:
- */
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(struct pt_regs *regs)
-{
- unsigned long flags;
- int cpu;
-
- local_irq_save(flags);
- cpu = raw_smp_processor_id();
- kgdb_info[cpu].debuggerinfo = regs;
- kgdb_info[cpu].task = current;
- /*
- * Make sure the above info reaches the primary CPU before
- * our cpu_in_kgdb[] flag setting does:
- */
- smp_wmb();
- atomic_set(&cpu_in_kgdb[cpu], 1);
-
- /* Disable any cpu specific hw breakpoints */
- kgdb_disable_hw_debug(regs);
-
- /* Wait till primary CPU is done with debugging */
- while (atomic_read(&passive_cpu_wait[cpu]))
- cpu_relax();
-
- kgdb_info[cpu].debuggerinfo = NULL;
- kgdb_info[cpu].task = NULL;
-
- /* fix up hardware debug registers on local cpu */
- if (arch_kgdb_ops.correct_hw_break)
- arch_kgdb_ops.correct_hw_break();
-
- /* Signal the primary CPU that we are done: */
- atomic_set(&cpu_in_kgdb[cpu], 0);
- touch_softlockup_watchdog_sync();
- clocksource_touch_watchdog();
- local_irq_restore(flags);
-}
-#endif
-
/*
* Some architectures need cache flushes when we set/clear a
* breakpoint:
return 1;
}
-/*
- * kgdb_handle_exception() - main entry point from a kernel exception
- *
- * Locking hierarchy:
- * interface locks, if any (begin_session)
- * kgdb lock (kgdb_active)
- */
-int
-kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
+static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs)
{
- struct kgdb_state kgdb_var;
- struct kgdb_state *ks = &kgdb_var;
unsigned long flags;
int sstep_tries = 100;
int error = 0;
int i, cpu;
-
- ks->cpu = raw_smp_processor_id();
- ks->ex_vector = evector;
- ks->signo = signo;
- ks->ex_vector = evector;
- ks->err_code = ecode;
- ks->kgdb_usethreadid = 0;
- ks->linux_regs = regs;
-
- if (kgdb_reenter_check(ks))
- return 0; /* Ouch, double exception ! */
-
+ int trace_on = 0;
acquirelock:
/*
* Interrupts will be restored by the 'trap return' code, except when
*/
local_irq_save(flags);
- cpu = raw_smp_processor_id();
+ cpu = ks->cpu;
+ kgdb_info[cpu].debuggerinfo = regs;
+ kgdb_info[cpu].task = current;
+ /*
+ * Make sure the above info reaches the primary CPU before
+ * our cpu_in_kgdb[] flag setting does:
+ */
+ atomic_inc(&cpu_in_kgdb[cpu]);
/*
- * Acquire the kgdb_active lock:
+ * CPU will loop if it is a slave or request to become a kgdb
+ * master cpu and acquire the kgdb_active lock:
*/
- while (atomic_cmpxchg(&kgdb_active, -1, cpu) != -1)
+ while (1) {
+ if (kgdb_info[cpu].exception_state & DCPU_WANT_MASTER) {
+ if (atomic_cmpxchg(&kgdb_active, -1, cpu) == cpu)
+ break;
+ } else if (kgdb_info[cpu].exception_state & DCPU_IS_SLAVE) {
+ if (!atomic_read(&passive_cpu_wait[cpu]))
+ goto return_normal;
+ } else {
+return_normal:
+ /* Return to normal operation by executing any
+ * hw breakpoint fixup.
+ */
+ if (arch_kgdb_ops.correct_hw_break)
+ arch_kgdb_ops.correct_hw_break();
+ if (trace_on)
+ tracing_on();
+ atomic_dec(&cpu_in_kgdb[cpu]);
+ touch_softlockup_watchdog_sync();
+ clocksource_touch_watchdog();
+ local_irq_restore(flags);
+ return 0;
+ }
cpu_relax();
+ }
/*
* For single stepping, try to only enter on the processor
if (kgdb_io_ops->pre_exception)
kgdb_io_ops->pre_exception();
- kgdb_info[ks->cpu].debuggerinfo = ks->linux_regs;
- kgdb_info[ks->cpu].task = current;
-
kgdb_disable_hw_debug(ks->linux_regs);
/*
*/
if (!kgdb_single_step) {
for (i = 0; i < NR_CPUS; i++)
- atomic_set(&passive_cpu_wait[i], 1);
+ atomic_inc(&passive_cpu_wait[i]);
}
- /*
- * spin_lock code is good enough as a barrier so we don't
- * need one here:
- */
- atomic_set(&cpu_in_kgdb[ks->cpu], 1);
-
#ifdef CONFIG_SMP
/* Signal the other CPUs to enter kgdb_wait() */
if ((!kgdb_single_step) && kgdb_do_roundup)
kgdb_single_step = 0;
kgdb_contthread = current;
exception_level = 0;
+ trace_on = tracing_is_on();
+ if (trace_on)
+ tracing_off();
/* Talk to debugger with gdbserial protocol */
error = gdb_serial_stub(ks);
if (kgdb_io_ops->post_exception)
kgdb_io_ops->post_exception();
- kgdb_info[ks->cpu].debuggerinfo = NULL;
- kgdb_info[ks->cpu].task = NULL;
- atomic_set(&cpu_in_kgdb[ks->cpu], 0);
+ atomic_dec(&cpu_in_kgdb[ks->cpu]);
if (!kgdb_single_step) {
for (i = NR_CPUS-1; i >= 0; i--)
- atomic_set(&passive_cpu_wait[i], 0);
+ atomic_dec(&passive_cpu_wait[i]);
/*
* Wait till all the CPUs have quit
* from the debugger.
else
kgdb_sstep_pid = 0;
}
+ if (trace_on)
+ tracing_on();
/* Free kgdb_active */
atomic_set(&kgdb_active, -1);
touch_softlockup_watchdog_sync();
return error;
}
+/*
+ * kgdb_handle_exception() - main entry point from a kernel exception
+ *
+ * Locking hierarchy:
+ * interface locks, if any (begin_session)
+ * kgdb lock (kgdb_active)
+ */
+int
+kgdb_handle_exception(int evector, int signo, int ecode, struct pt_regs *regs)
+{
+ struct kgdb_state kgdb_var;
+ struct kgdb_state *ks = &kgdb_var;
+ int ret;
+
+ ks->cpu = raw_smp_processor_id();
+ ks->ex_vector = evector;
+ ks->signo = signo;
+ ks->ex_vector = evector;
+ ks->err_code = ecode;
+ ks->kgdb_usethreadid = 0;
+ ks->linux_regs = regs;
+
+ if (kgdb_reenter_check(ks))
+ return 0; /* Ouch, double exception ! */
+ kgdb_info[ks->cpu].exception_state |= DCPU_WANT_MASTER;
+ ret = kgdb_cpu_enter(ks, regs);
+ kgdb_info[ks->cpu].exception_state &= ~DCPU_WANT_MASTER;
+ return ret;
+}
+
int kgdb_nmicallback(int cpu, void *regs)
{
#ifdef CONFIG_SMP
+ struct kgdb_state kgdb_var;
+ struct kgdb_state *ks = &kgdb_var;
+
+ memset(ks, 0, sizeof(struct kgdb_state));
+ ks->cpu = cpu;
+ ks->linux_regs = regs;
+
if (!atomic_read(&cpu_in_kgdb[cpu]) &&
- atomic_read(&kgdb_active) != cpu &&
- atomic_read(&cpu_in_kgdb[atomic_read(&kgdb_active)])) {
- kgdb_wait((struct pt_regs *)regs);
+ atomic_read(&kgdb_active) != -1 &&
+ atomic_read(&kgdb_active) != cpu) {
+ kgdb_info[cpu].exception_state |= DCPU_IS_SLAVE;
+ kgdb_cpu_enter(ks, regs);
+ kgdb_info[cpu].exception_state &= ~DCPU_IS_SLAVE;
return 0;
}
#endif
*/
void kgdb_breakpoint(void)
{
- atomic_set(&kgdb_setting_breakpoint, 1);
+ atomic_inc(&kgdb_setting_breakpoint);
wmb(); /* Sync point before breakpoint */
arch_kgdb_breakpoint();
wmb(); /* Sync point after breakpoint */
- atomic_set(&kgdb_setting_breakpoint, 0);
+ atomic_dec(&kgdb_setting_breakpoint);
}
EXPORT_SYMBOL_GPL(kgdb_breakpoint);
set_task_comm(tsk, "kthreadd");
ignore_signals(tsk);
set_cpus_allowed_ptr(tsk, cpu_all_mask);
- set_mems_allowed(node_possible_map);
+ set_mems_allowed(node_states[N_HIGH_MEMORY]);
current->flags |= PF_NOFREEZE | PF_FREEZER_NOSIG;
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/list.h>
-#include <linux/slab.h>
#include <linux/stacktrace.h>
static DEFINE_SPINLOCK(latency_lock);
#include <linux/ftrace.h>
#include <linux/stringify.h>
#include <linux/bitops.h>
+#include <linux/gfp.h>
#include <asm/sections.h>
unsigned long start = (unsigned long) &_stext,
end = (unsigned long) &_end,
addr = (unsigned long) obj;
-#ifdef CONFIG_SMP
- int i;
-#endif
/*
* static variable?
if (arch_is_kernel_data(addr))
return 1;
-#ifdef CONFIG_SMP
/*
- * percpu var?
+ * in-kernel percpu var?
*/
- for_each_possible_cpu(i) {
- start = (unsigned long) &__per_cpu_start + per_cpu_offset(i);
- end = (unsigned long) &__per_cpu_start + PERCPU_ENOUGH_ROOM
- + per_cpu_offset(i);
-
- if ((addr >= start) && (addr < end))
- return 1;
- }
-#endif
+ if (is_kernel_percpu_address(addr))
+ return 1;
/*
- * module var?
+ * module static or percpu var?
*/
- return is_module_address(addr);
+ return is_module_address(addr) || is_module_percpu_address(addr);
}
/*
#ifdef CONFIG_SMP
-static void *percpu_modalloc(unsigned long size, unsigned long align,
- const char *name)
+static inline void __percpu *mod_percpu(struct module *mod)
{
- void *ptr;
+ return mod->percpu;
+}
+static int percpu_modalloc(struct module *mod,
+ unsigned long size, unsigned long align)
+{
if (align > PAGE_SIZE) {
printk(KERN_WARNING "%s: per-cpu alignment %li > %li\n",
- name, align, PAGE_SIZE);
+ mod->name, align, PAGE_SIZE);
align = PAGE_SIZE;
}
- ptr = __alloc_reserved_percpu(size, align);
- if (!ptr)
+ mod->percpu = __alloc_reserved_percpu(size, align);
+ if (!mod->percpu) {
printk(KERN_WARNING
"Could not allocate %lu bytes percpu data\n", size);
- return ptr;
+ return -ENOMEM;
+ }
+ mod->percpu_size = size;
+ return 0;
}
-static void percpu_modfree(void *freeme)
+static void percpu_modfree(struct module *mod)
{
- free_percpu(freeme);
+ free_percpu(mod->percpu);
}
static unsigned int find_pcpusec(Elf_Ehdr *hdr,
return find_sec(hdr, sechdrs, secstrings, ".data.percpu");
}
-static void percpu_modcopy(void *pcpudest, const void *from, unsigned long size)
+static void percpu_modcopy(struct module *mod,
+ const void *from, unsigned long size)
{
int cpu;
for_each_possible_cpu(cpu)
- memcpy(pcpudest + per_cpu_offset(cpu), from, size);
+ memcpy(per_cpu_ptr(mod->percpu, cpu), from, size);
+}
+
+/**
+ * is_module_percpu_address - test whether address is from module static percpu
+ * @addr: address to test
+ *
+ * Test whether @addr belongs to module static percpu area.
+ *
+ * RETURNS:
+ * %true if @addr is from module static percpu area
+ */
+bool is_module_percpu_address(unsigned long addr)
+{
+ struct module *mod;
+ unsigned int cpu;
+
+ preempt_disable();
+
+ list_for_each_entry_rcu(mod, &modules, list) {
+ if (!mod->percpu_size)
+ continue;
+ for_each_possible_cpu(cpu) {
+ void *start = per_cpu_ptr(mod->percpu, cpu);
+
+ if ((void *)addr >= start &&
+ (void *)addr < start + mod->percpu_size) {
+ preempt_enable();
+ return true;
+ }
+ }
+ }
+
+ preempt_enable();
+ return false;
}
#else /* ... !CONFIG_SMP */
-static inline void *percpu_modalloc(unsigned long size, unsigned long align,
- const char *name)
+static inline void __percpu *mod_percpu(struct module *mod)
{
return NULL;
}
-static inline void percpu_modfree(void *pcpuptr)
+static inline int percpu_modalloc(struct module *mod,
+ unsigned long size, unsigned long align)
+{
+ return -ENOMEM;
+}
+static inline void percpu_modfree(struct module *mod)
{
- BUG();
}
static inline unsigned int find_pcpusec(Elf_Ehdr *hdr,
Elf_Shdr *sechdrs,
{
return 0;
}
-static inline void percpu_modcopy(void *pcpudst, const void *src,
- unsigned long size)
+static inline void percpu_modcopy(struct module *mod,
+ const void *from, unsigned long size)
{
/* pcpusec should be 0, and size of that section should be 0. */
BUG_ON(size != 0);
}
+bool is_module_percpu_address(unsigned long addr)
+{
+ return false;
+}
#endif /* CONFIG_SMP */
int cpu;
INIT_LIST_HEAD(&mod->modules_which_use_me);
- for_each_possible_cpu(cpu)
- per_cpu_ptr(mod->refptr, cpu)->count = 0;
+ for_each_possible_cpu(cpu) {
+ per_cpu_ptr(mod->refptr, cpu)->incs = 0;
+ per_cpu_ptr(mod->refptr, cpu)->decs = 0;
+ }
/* Hold reference count during initialization. */
- __this_cpu_write(mod->refptr->count, 1);
+ __this_cpu_write(mod->refptr->incs, 1);
/* Backwards compatibility macros put refcount during init. */
mod->waiter = current;
}
unsigned int module_refcount(struct module *mod)
{
- unsigned int total = 0;
+ unsigned int incs = 0, decs = 0;
int cpu;
for_each_possible_cpu(cpu)
- total += per_cpu_ptr(mod->refptr, cpu)->count;
- return total;
+ decs += per_cpu_ptr(mod->refptr, cpu)->decs;
+ /*
+ * ensure the incs are added up after the decs.
+ * module_put ensures incs are visible before decs with smp_wmb.
+ *
+ * This 2-count scheme avoids the situation where the refcount
+ * for CPU0 is read, then CPU0 increments the module refcount,
+ * then CPU1 drops that refcount, then the refcount for CPU1 is
+ * read. We would record a decrement but not its corresponding
+ * increment so we would see a low count (disaster).
+ *
+ * Rare situation? But module_refcount can be preempted, and we
+ * might be tallying up 4096+ CPUs. So it is not impossible.
+ */
+ smp_rmb();
+ for_each_possible_cpu(cpu)
+ incs += per_cpu_ptr(mod->refptr, cpu)->incs;
+ return incs - decs;
}
EXPORT_SYMBOL(module_refcount);
{
if (module) {
preempt_disable();
- __this_cpu_dec(module->refptr->count);
+ smp_wmb(); /* see comment in module_refcount */
+ __this_cpu_inc(module->refptr->decs);
trace_module_put(module, _RET_IP_,
- __this_cpu_read(module->refptr->count));
+ __this_cpu_read(module->refptr->decs));
/* Maybe they're waiting for us to drop reference? */
if (unlikely(!module_is_live(module)))
wake_up_process(module->waiter);
/* This may be NULL, but that's OK */
module_free(mod, mod->module_init);
kfree(mod->args);
- if (mod->percpu)
- percpu_modfree(mod->percpu);
+ percpu_modfree(mod);
#if defined(CONFIG_MODULE_UNLOAD)
if (mod->refptr)
free_percpu(mod->refptr);
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == pcpuindex)
- secbase = (unsigned long)mod->percpu;
+ secbase = (unsigned long)mod_percpu(mod);
else
secbase = sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
unsigned int modindex, versindex, infoindex, pcpuindex;
struct module *mod;
long err = 0;
- void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
+ void *ptr = NULL; /* Stops spurious gcc warning */
unsigned long symoffs, stroffs, *strmap;
mm_segment_t old_fs;
if (pcpuindex) {
/* We have a special allocation for this section. */
- percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
- sechdrs[pcpuindex].sh_addralign,
- mod->name);
- if (!percpu) {
- err = -ENOMEM;
+ err = percpu_modalloc(mod, sechdrs[pcpuindex].sh_size,
+ sechdrs[pcpuindex].sh_addralign);
+ if (err)
goto free_mod;
- }
sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
- mod->percpu = percpu;
}
/* Determine total sizes, and put offsets in sh_entsize. For now
sort_extable(mod->extable, mod->extable + mod->num_exentries);
/* Finally, copy percpu area over. */
- percpu_modcopy(mod->percpu, (void *)sechdrs[pcpuindex].sh_addr,
+ percpu_modcopy(mod, (void *)sechdrs[pcpuindex].sh_addr,
sechdrs[pcpuindex].sh_size);
add_kallsyms(mod, sechdrs, hdr->e_shnum, symindex, strindex,
module_free(mod, mod->module_core);
/* mod will be freed with core. Don't access it beyond this line! */
free_percpu:
- if (percpu)
- percpu_modfree(percpu);
+ percpu_modfree(mod);
free_mod:
kfree(args);
kfree(strmap);
* Pavel Emelianov <xemul@openvz.org>
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/nsproxy.h>
#include <linux/init_task.h>
#include <linux/padata.h>
#include <linux/mutex.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/rcupdate.h>
#define MAX_SEQ_NR INT_MAX - NR_CPUS
#include <linux/smp.h>
#include <linux/file.h>
#include <linux/poll.h>
+#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/dcache.h>
#include <linux/percpu.h>
struct perf_event_context *ctx = task->perf_event_ctxp;
struct perf_event_context *next_ctx;
struct perf_event_context *parent;
- struct pt_regs *regs;
int do_switch = 1;
- regs = task_pt_regs(task);
- perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, regs, 0);
+ perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
if (likely(!ctx || !cpuctx->task_ctx))
return;
return NULL;
}
-#ifdef CONFIG_EVENT_TRACING
__weak
void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int skip)
{
}
-#endif
+
/*
* Output
struct perf_task_event *task_event)
{
struct perf_output_handle handle;
- int size;
struct task_struct *task = task_event->task;
- int ret;
+ unsigned long flags;
+ int size, ret;
+
+ /*
+ * If this CPU attempts to acquire an rq lock held by a CPU spinning
+ * in perf_output_lock() from interrupt context, it's game over.
+ */
+ local_irq_save(flags);
size = task_event->event_id.header.size;
ret = perf_output_begin(&handle, event, size, 0, 0);
- if (ret)
+ if (ret) {
+ local_irq_restore(flags);
return;
+ }
task_event->event_id.pid = perf_event_pid(event, task);
task_event->event_id.ppid = perf_event_pid(event, current);
perf_output_put(&handle, task_event->event_id);
perf_output_end(&handle);
+ local_irq_restore(flags);
}
static int perf_event_task_match(struct perf_event *event)
err_free_put_context:
if (err < 0)
- kfree(event);
+ free_event(event);
err_put_context:
if (err < 0)
#include <linux/syscalls.h>
#include <linux/err.h>
#include <linux/acct.h>
+#include <linux/slab.h>
#define BITS_PER_PAGE (PAGE_SIZE*8)
}
}
-static void stop_process_timers(struct task_struct *tsk)
+static void stop_process_timers(struct signal_struct *sig)
{
- struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
+ struct thread_group_cputimer *cputimer = &sig->cputimer;
unsigned long flags;
if (!cputimer->running)
spin_lock_irqsave(&cputimer->lock, flags);
cputimer->running = 0;
spin_unlock_irqrestore(&cputimer->lock, flags);
+
+ sig->cputime_expires.prof_exp = cputime_zero;
+ sig->cputime_expires.virt_exp = cputime_zero;
+ sig->cputime_expires.sched_exp = 0;
}
static u32 onecputick;
list_empty(&timers[CPUCLOCK_VIRT]) &&
cputime_eq(sig->it[CPUCLOCK_VIRT].expires, cputime_zero) &&
list_empty(&timers[CPUCLOCK_SCHED])) {
- stop_process_timers(tsk);
+ stop_process_timers(sig);
return;
}
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
+#include <linux/gfp.h>
#include <scsi/scsi_scan.h>
#include <asm/suspend.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/suspend.h>
/*
printk(KERN_ERR "Freezing of tasks failed after %d.%02d seconds "
"(%d tasks refusing to freeze):\n",
elapsed_csecs / 100, elapsed_csecs % 100, todo);
- show_state();
read_lock(&tasklist_lock);
do_each_thread(g, p) {
task_lock(p);
if (freezing(p) && !freezer_should_skip(p))
- printk(KERN_ERR " %s\n", p->comm);
+ sched_show_task(p);
cancel_freezing(p);
task_unlock(p);
} while_each_thread(g, p);
if (nosig_only && should_send_signal(p))
continue;
- if (cgroup_frozen(p))
+ if (cgroup_freezing_or_frozen(p))
continue;
thaw_process(p);
#include <linux/console.h>
#include <linux/highmem.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/syscalls.h>
+#include <linux/gfp.h>
#include "power.h"
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/pm.h>
+#include <linux/slab.h>
#include "power.h"
* User space encodes device types as two-byte values,
* so we need to recode them
*/
- swdev = old_decode_dev(swap_area.dev);
+ swdev = new_decode_dev(swap_area.dev);
if (swdev) {
offset = swap_area.offset;
data->swap = swap_type_of(swdev, offset, NULL);
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/kernel_stat.h>
+#include <linux/hardirq.h>
#ifdef CONFIG_DEBUG_LOCK_ALLOC
static struct lock_class_key rcu_lock_key;
int rcu_scheduler_active __read_mostly;
EXPORT_SYMBOL_GPL(rcu_scheduler_active);
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+
+int debug_lockdep_rcu_enabled(void)
+{
+ return rcu_scheduler_active && debug_locks &&
+ current->lockdep_recursion == 0;
+}
+EXPORT_SYMBOL_GPL(debug_lockdep_rcu_enabled);
+
+/**
+ * rcu_read_lock_bh_held - might we be in RCU-bh read-side critical section?
+ *
+ * Check for bottom half being disabled, which covers both the
+ * CONFIG_PROVE_RCU and not cases. Note that if someone uses
+ * rcu_read_lock_bh(), but then later enables BH, lockdep (if enabled)
+ * will show the situation.
+ *
+ * Check debug_lockdep_rcu_enabled() to prevent false positives during boot.
+ */
+int rcu_read_lock_bh_held(void)
+{
+ if (!debug_lockdep_rcu_enabled())
+ return 1;
+ return in_softirq();
+}
+EXPORT_SYMBOL_GPL(rcu_read_lock_bh_held);
+
+#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
/*
* This function is invoked towards the end of the scheduler's initialization
* process. Before this is called, the idle task might contain
rcu = container_of(head, struct rcu_synchronize, head);
complete(&rcu->completion);
}
+
+#ifdef CONFIG_PROVE_RCU
+/*
+ * wrapper function to avoid #include problems.
+ */
+int rcu_my_thread_group_empty(void)
+{
+ return thread_group_empty(current);
+}
+EXPORT_SYMBOL_GPL(rcu_my_thread_group_empty);
+#endif /* #ifdef CONFIG_PROVE_RCU */
#include <linux/types.h>
#include <linux/parser.h>
#include <linux/fs.h>
-#include <linux/slab.h>
#include <linux/res_counter.h>
#include <linux/uaccess.h>
#include <linux/mm.h>
}
/**
- * request_resource - request and reserve an I/O or memory resource
+ * request_resource_conflict - request and reserve an I/O or memory resource
* @root: root resource descriptor
* @new: resource descriptor desired by caller
*
- * Returns 0 for success, negative error code on error.
+ * Returns 0 for success, conflict resource on error.
*/
-int request_resource(struct resource *root, struct resource *new)
+struct resource *request_resource_conflict(struct resource *root, struct resource *new)
{
struct resource *conflict;
write_lock(&resource_lock);
conflict = __request_resource(root, new);
write_unlock(&resource_lock);
+ return conflict;
+}
+
+/**
+ * request_resource - request and reserve an I/O or memory resource
+ * @root: root resource descriptor
+ * @new: resource descriptor desired by caller
+ *
+ * Returns 0 for success, negative error code on error.
+ */
+int request_resource(struct resource *root, struct resource *new)
+{
+ struct resource *conflict;
+
+ conflict = request_resource_conflict(root, new);
return conflict ? -EBUSY : 0;
}
}
/**
- * insert_resource - Inserts a resource in the resource tree
+ * insert_resource_conflict - Inserts resource in the resource tree
* @parent: parent of the new resource
* @new: new resource to insert
*
- * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ * Returns 0 on success, conflict resource if the resource can't be inserted.
*
- * This function is equivalent to request_resource when no conflict
+ * This function is equivalent to request_resource_conflict when no conflict
* happens. If a conflict happens, and the conflicting resources
* entirely fit within the range of the new resource, then the new
* resource is inserted and the conflicting resources become children of
* the new resource.
*/
-int insert_resource(struct resource *parent, struct resource *new)
+struct resource *insert_resource_conflict(struct resource *parent, struct resource *new)
{
struct resource *conflict;
write_lock(&resource_lock);
conflict = __insert_resource(parent, new);
write_unlock(&resource_lock);
+ return conflict;
+}
+
+/**
+ * insert_resource - Inserts a resource in the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ */
+int insert_resource(struct resource *parent, struct resource *new)
+{
+ struct resource *conflict;
+
+ conflict = insert_resource_conflict(parent, new);
return conflict ? -EBUSY : 0;
}
#include <linux/debugfs.h>
#include <linux/ctype.h>
#include <linux/ftrace.h>
+#include <linux/slab.h>
#include <asm/tlb.h>
#include <asm/irq_regs.h>
/* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
static inline void set_task_rq(struct task_struct *p, unsigned int cpu)
{
+ /*
+ * Strictly speaking this rcu_read_lock() is not needed since the
+ * task_group is tied to the cgroup, which in turn can never go away
+ * as long as there are tasks attached to it.
+ *
+ * However since task_group() uses task_subsys_state() which is an
+ * rcu_dereference() user, this quiets CONFIG_PROVE_RCU.
+ */
+ rcu_read_lock();
#ifdef CONFIG_FAIR_GROUP_SCHED
p->se.cfs_rq = task_group(p)->cfs_rq[cpu];
p->se.parent = task_group(p)->se[cpu];
p->rt.rt_rq = task_group(p)->rt_rq[cpu];
p->rt.parent = task_group(p)->rt_se[cpu];
#endif
+ rcu_read_unlock();
}
#else
{
unsigned long flags;
struct rq *rq;
- int cpu = get_cpu();
+ int cpu __maybe_unused = get_cpu();
#ifdef CONFIG_SMP
/*
* the mutex owner just released it and exited.
*/
if (probe_kernel_address(&owner->cpu, cpu))
- goto out;
+ return 0;
#else
cpu = owner->cpu;
#endif
* the cpu field may no longer be valid.
*/
if (cpu >= nr_cpumask_bits)
- goto out;
+ return 0;
/*
* We need to validate that we can do a
* get_cpu() and that we have the percpu area.
*/
if (!cpu_online(cpu))
- goto out;
+ return 0;
rq = cpu_rq(cpu);
cpu_relax();
}
-out:
+
return 1;
}
#endif
int ret;
cpumask_var_t mask;
- if (len < cpumask_size())
+ if ((len * BITS_PER_BYTE) < nr_cpu_ids)
+ return -EINVAL;
+ if (len & (sizeof(unsigned long)-1))
return -EINVAL;
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
ret = sched_getaffinity(pid, mask);
if (ret == 0) {
- if (copy_to_user(user_mask_ptr, mask, cpumask_size()))
+ size_t retlen = min_t(size_t, len, cpumask_size());
+
+ if (copy_to_user(user_mask_ptr, mask, retlen))
ret = -EFAULT;
else
- ret = cpumask_size();
+ ret = retlen;
}
free_cpumask_var(mask);
get_task_struct(mt);
task_rq_unlock(rq, &flags);
- wake_up_process(rq->migration_thread);
+ wake_up_process(mt);
put_task_struct(mt);
wait_for_completion(&req.done);
tlb_migrate_finish(p->mm);
* of the License.
*/
+#include <linux/gfp.h>
#include "sched_cpupri.h"
/* Convert between a 140 based task->prio, and our 102 based cpupri */
{
char path[64];
+ rcu_read_lock();
cgroup_path(task_group(p)->css.cgroup, path, sizeof(path));
+ rcu_read_unlock();
SEQ_printf(m, " %s", path);
}
#endif
p->se.nr_wakeups_idle = 0;
p->sched_info.bkl_count = 0;
#endif
- p->se.sum_exec_runtime = 0;
- p->se.prev_sum_exec_runtime = 0;
- p->nvcsw = 0;
- p->nivcsw = 0;
}
goto cancelled;
/* the timer holds a reference whilst it is pending */
- ret = work->ops->get_ref(work);
+ ret = slow_work_get_ref(work);
if (ret < 0)
goto cant_get_ref;
*/
static inline void slow_work_set_thread_pid(int id, pid_t pid)
{
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
slow_work_pids[id] = pid;
#endif
}
static inline void slow_work_mark_time(struct slow_work *work)
{
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
work->mark = CURRENT_TIME;
#endif
}
static inline void slow_work_begin_exec(int id, struct slow_work *work)
{
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
slow_work_execs[id] = work;
#endif
}
static inline void slow_work_end_exec(int id, struct slow_work *work)
{
-#ifdef CONFIG_SLOW_WORK_PROC
+#ifdef CONFIG_SLOW_WORK_DEBUG
write_lock(&slow_work_execs_lock);
slow_work_execs[id] = NULL;
write_unlock(&slow_work_execs_lock);
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/smp.h>
#include <linux/cpu.h>
* Wake up the high-prio watchdog task twice per
* threshold timespan.
*/
- if (now > touch_ts + softlockup_thresh/2)
+ if (time_after(now - softlockup_thresh/2, touch_ts))
wake_up_process(per_cpu(softlockup_watchdog, this_cpu));
/* Warn about unreasonable delays: */
- if (now <= (touch_ts + softlockup_thresh))
+ if (time_before_eq(now - softlockup_thresh, touch_ts))
return;
per_cpu(softlockup_print_ts, this_cpu) = touch_ts;
#include <linux/preempt.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/srcu.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
#include <linux/fs_struct.h>
+#include <linux/gfp.h>
#include <linux/compat.h>
#include <linux/syscalls.h>
#ifdef COMPAT_UTS_MACHINE
#define override_architecture(name) \
- (current->personality == PER_LINUX32 && \
+ (personality(current->personality) == PER_LINUX32 && \
copy_to_user(name->machine, COMPAT_UTS_MACHINE, \
sizeof(COMPAT_UTS_MACHINE)))
#else
#include <linux/file.h>
#include <linux/ctype.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#ifdef CONFIG_SYSCTL_SYSCALL
#include <linux/delayacct.h>
#include <linux/cpumask.h>
#include <linux/percpu.h>
+#include <linux/slab.h>
#include <linux/cgroupstats.h>
#include <linux/cgroup.h>
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/security.h>
#include <linux/fs.h>
-#include <linux/slab.h>
#include <linux/math64.h>
#include <linux/ptrace.h>
#include "tick-internal.h"
+/* Limit min_delta to a jiffie */
+#define MIN_DELTA_LIMIT (NSEC_PER_SEC / HZ)
+
+static int tick_increase_min_delta(struct clock_event_device *dev)
+{
+ /* Nothing to do if we already reached the limit */
+ if (dev->min_delta_ns >= MIN_DELTA_LIMIT)
+ return -ETIME;
+
+ if (dev->min_delta_ns < 5000)
+ dev->min_delta_ns = 5000;
+ else
+ dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+ if (dev->min_delta_ns > MIN_DELTA_LIMIT)
+ dev->min_delta_ns = MIN_DELTA_LIMIT;
+
+ printk(KERN_WARNING "CE: %s increased min_delta_ns to %llu nsec\n",
+ dev->name ? dev->name : "?",
+ (unsigned long long) dev->min_delta_ns);
+ return 0;
+}
+
/**
* tick_program_event internal worker function
*/
if (!ret || !force)
return ret;
+ dev->retries++;
/*
- * We tried 2 times to program the device with the given
- * min_delta_ns. If that's not working then we double it
+ * We tried 3 times to program the device with the given
+ * min_delta_ns. If that's not working then we increase it
* and emit a warning.
*/
if (++i > 2) {
/* Increase the min. delta and try again */
- if (!dev->min_delta_ns)
- dev->min_delta_ns = 5000;
- else
- dev->min_delta_ns += dev->min_delta_ns >> 1;
-
- printk(KERN_WARNING
- "CE: %s increasing min_delta_ns to %llu nsec\n",
- dev->name ? dev->name : "?",
- (unsigned long long) dev->min_delta_ns << 1);
-
+ if (tick_increase_min_delta(dev)) {
+ /*
+ * Get out of the loop if min_delta_ns
+ * hit the limit already. That's
+ * better than staying here forever.
+ *
+ * We clear next_event so we have a
+ * chance that the box survives.
+ */
+ printk(KERN_WARNING
+ "CE: Reprogramming failure. Giving up\n");
+ dev->next_event.tv64 = KTIME_MAX;
+ return -ETIME;
+ }
i = 0;
}
#include <linux/timecompare.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/math64.h>
/*
shift = min(shift, maxshift);
while (offset >= timekeeper.cycle_interval) {
offset = logarithmic_accumulation(offset, shift);
- shift--;
+ if(offset < timekeeper.cycle_interval<<shift)
+ shift--;
}
/* correct the clock when NTP error is too big */
SEQ_printf(m, " event_handler: ");
print_name_offset(m, dev->event_handler);
SEQ_printf(m, "\n");
+ SEQ_printf(m, " retries: %lu\n", dev->retries);
}
static void timer_list_show_tickdevices(struct seq_file *m)
u64 now = ktime_to_ns(ktime_get());
int cpu;
- SEQ_printf(m, "Timer List Version: v0.5\n");
+ SEQ_printf(m, "Timer List Version: v0.6\n");
SEQ_printf(m, "HRTIMER_MAX_CLOCK_BASES: %d\n", HRTIMER_MAX_CLOCK_BASES);
SEQ_printf(m, "now at %Ld nsecs\n", (unsigned long long)now);
#include <linux/kallsyms.h>
#include <linux/perf_event.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
if (base->running_timer == timer)
goto out;
+ timer_stats_timer_clear_start_info(timer);
ret = 0;
if (timer_pending(timer)) {
detach_timer(timer, 1);
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/smp_lock.h>
#include <linux/time.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
#include <linux/sysctl.h>
+#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/list.h>
#include <linux/hash.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/module.h>
-#include <linux/slab.h>
#define CREATE_TRACE_POINTS
#include <trace/events/power.h>
#include <linux/module.h>
#include <linux/percpu.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/list.h>
#define RB_MAX_SMALL_DATA (RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
#define RB_EVNT_MIN_SIZE 8U /* two 32bit words */
+#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+# define RB_FORCE_8BYTE_ALIGNMENT 0
+# define RB_ARCH_ALIGNMENT RB_ALIGNMENT
+#else
+# define RB_FORCE_8BYTE_ALIGNMENT 1
+# define RB_ARCH_ALIGNMENT 8U
+#endif
+
/* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */
#define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX
for (i = 0; i < nr_pages; i++) {
if (RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)))
- return;
+ goto out;
p = cpu_buffer->pages->next;
bpage = list_entry(p, struct buffer_page, list);
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
if (RB_WARN_ON(cpu_buffer, list_empty(cpu_buffer->pages)))
- return;
+ goto out;
rb_reset_cpu(cpu_buffer);
rb_check_pages(cpu_buffer);
+out:
spin_unlock_irq(&cpu_buffer->reader_lock);
}
for (i = 0; i < nr_pages; i++) {
if (RB_WARN_ON(cpu_buffer, list_empty(pages)))
- return;
+ goto out;
p = pages->next;
bpage = list_entry(p, struct buffer_page, list);
list_del_init(&bpage->list);
rb_reset_cpu(cpu_buffer);
rb_check_pages(cpu_buffer);
+out:
spin_unlock_irq(&cpu_buffer->reader_lock);
}
case 0:
length -= RB_EVNT_HDR_SIZE;
- if (length > RB_MAX_SMALL_DATA)
+ if (length > RB_MAX_SMALL_DATA || RB_FORCE_8BYTE_ALIGNMENT)
event->array[0] = length;
else
event->type_len = DIV_ROUND_UP(length, RB_ALIGNMENT);
if (!length)
length = 1;
- if (length > RB_MAX_SMALL_DATA)
+ if (length > RB_MAX_SMALL_DATA || RB_FORCE_8BYTE_ALIGNMENT)
length += sizeof(event.array[0]);
length += RB_EVNT_HDR_SIZE;
- length = ALIGN(length, RB_ALIGNMENT);
+ length = ALIGN(length, RB_ARCH_ALIGNMENT);
return length;
}
#include <linux/kdebug.h>
#include <linux/string.h>
#include <linux/rwsem.h>
+#include <linux/slab.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/poll.h>
-#include <linux/gfp.h>
#include <linux/fs.h>
#include "trace.h"
int this_cpu;
u64 now;
- raw_local_irq_save(flags);
+ local_irq_save(flags);
this_cpu = raw_smp_processor_id();
now = cpu_clock(this_cpu);
arch_spin_unlock(&trace_clock_struct.lock);
out:
- raw_local_irq_restore(flags);
+ local_irq_restore(flags);
return now;
}
static char *perf_trace_buf;
static char *perf_trace_buf_nmi;
-typedef typeof(char [PERF_MAX_TRACE_SIZE]) perf_trace_t ;
+/*
+ * Force it to be aligned to unsigned long to avoid misaligned accesses
+ * suprises
+ */
+typedef typeof(unsigned long [PERF_MAX_TRACE_SIZE / sizeof(unsigned long)])
+ perf_trace_t;
/* Count the events in use (per event id, not per instance) */
static int total_ref_count;
char *trace_buf, *raw_data;
int pc, cpu;
+ BUILD_BUG_ON(PERF_MAX_TRACE_SIZE % sizeof(unsigned long));
+
pc = preempt_count();
/* Protect the per cpu buffer, begin the rcu read side */
raw_data = per_cpu_ptr(trace_buf, cpu);
/* zero the dead bytes from align to not leak stack to user */
- *(u64 *)(&raw_data[size - sizeof(u64)]) = 0ULL;
+ memset(&raw_data[size - sizeof(u64)], 0, sizeof(u64));
entry = (struct trace_entry *)raw_data;
tracing_generic_entry_update(entry, *irq_flags, pc);
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <asm/setup.h>
#include <linux/ctype.h>
#include <linux/mutex.h>
#include <linux/perf_event.h>
+#include <linux/slab.h>
#include "trace.h"
#include "trace_output.h"
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include "trace.h"
#include <linux/debugfs.h>
#include <linux/ftrace.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include "trace_output.h"
#include <linux/kernel.h>
#include <linux/mmiotrace.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include <asm/atomic.h>
#include <linux/stringify.h>
#include <linux/kthread.h>
#include <linux/delay.h>
+#include <linux/slab.h>
static inline int trace_valid_entry(struct trace_entry *entry)
{
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/rbtree.h>
#include <linux/debugfs.h>
#include "trace_stat.h"
#include <trace/syscall.h>
#include <trace/events/syscalls.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/ftrace.h>
#include <linux/perf_event.h>
#include <trace/events/workqueue.h>
#include <linux/list.h>
#include <linux/percpu.h>
+#include <linux/slab.h>
#include <linux/kref.h>
#include "trace_stat.h"
#include "trace.h"
{
if (del_timer_sync(&dwork->timer)) {
struct cpu_workqueue_struct *cwq;
- cwq = wq_per_cpu(keventd_wq, get_cpu());
+ cwq = wq_per_cpu(get_wq_data(&dwork->work)->wq, get_cpu());
__queue_work(cwq, &dwork->work);
put_cpu();
}
config DEBUG_SECTION_MISMATCH
bool "Enable full Section mismatch analysis"
- depends on UNDEFINED
+ depends on UNDEFINED || (BLACKFIN)
+ default y
# This option is on purpose disabled for now.
# It will be enabled when we are down to a reasonable number
# of section mismatch warnings (< 10 for an allyesconfig build)
config DEBUG_KMEMLEAK
bool "Kernel memory leak detector"
depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
- (X86 || ARM || PPC || S390 || SUPERH)
+ (X86 || ARM || PPC || S390 || SPARC64 || SUPERH || MICROBLAZE)
select DEBUG_FS if SYSFS
select STACKTRACE if STACKTRACE_SUPPORT
obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
- string_helpers.o gcd.o list_sort.o
+ string_helpers.o gcd.o lcm.o list_sort.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/compiler.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/init.h>
#include <asm/atomic.h>
#include "crc32defs.h"
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <linux/hash.h>
#define ODEBUG_HASH_BITS 14
u32 src_len, dst_len;
size_t tmp;
u8 *in_buf, *in_buf_save, *out_buf;
- int obytes_processed = 0;
+ int ret = -1;
set_error_fn(error_fn);
/* decompress */
tmp = dst_len;
- r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
+
+ /* When the input data is not compressed at all,
+ * lzo1x_decompress_safe will fail, so call memcpy()
+ * instead */
+ if (unlikely(dst_len == src_len))
+ memcpy(out_buf, in_buf, src_len);
+ else {
+ r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
out_buf, &tmp);
- if (r != LZO_E_OK || dst_len != tmp) {
- error("Compressed data violation");
- goto exit_2;
+ if (r != LZO_E_OK || dst_len != tmp) {
+ error("Compressed data violation");
+ goto exit_2;
+ }
}
- obytes_processed += dst_len;
if (flush)
flush(out_buf, dst_len);
if (output)
in_buf += src_len;
}
+ ret = 0;
exit_2:
if (!input)
free(in_buf);
if (!output)
free(out_buf);
exit:
- return obytes_processed;
+ return ret;
}
#define decompress unlzo
#include <linux/pci.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <linux/module.h>
void devm_ioremap_release(struct device *dev, void *res)
* Now parse out the first token and use it as the name for the
* driver to filter for.
*/
- for (i = 0; i < NAME_MAX_LEN; ++i) {
+ for (i = 0; i < NAME_MAX_LEN - 1; ++i) {
current_driver_name[i] = buf[i];
if (isspace(buf[i]) || buf[i] == ' ' || buf[i] == 0)
break;
#include <linux/uaccess.h>
#include <linux/dynamic_debug.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
extern struct _ddebug __start___verbose[];
extern struct _ddebug __stop___verbose[];
ret->element_size = element_size;
ret->total_nr_elements = total;
if (elements_fit_in_base(ret) && !(flags & __GFP_ZERO))
- memset(ret->parts[0], FLEX_ARRAY_FREE,
+ memset(&ret->parts[0], FLEX_ARRAY_FREE,
FLEX_ARRAY_BASE_BYTES_LEFT);
return ret;
}
* Version 2. See the file COPYING for more details.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/bitmap.h>
#include <linux/genalloc.h>
the two sets of lengths.
*/
#include <linux/compiler.h>
+#include <linux/slab.h>
#ifdef RCSID
static char rcsid[] = "#Id: inflate.c,v 0.14 1993/06/10 13:27:04 jloup Exp #";
#include <stdarg.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/string.h>
#include <linux/kobject.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/skbuff.h>
#include <linux/kref.h>
#include <linux/module.h>
+#include <linux/slab.h>
/**
* kref_set - initialize object and set refcount to requested number.
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/gcd.h>
+#include <linux/module.h>
+
+/* Lowest common multiple */
+unsigned long lcm(unsigned long a, unsigned long b)
+{
+ if (a && b)
+ return (a * b) / gcd(a, b);
+ else if (b)
+ return b;
+
+ return a;
+}
+EXPORT_SYMBOL_GPL(lcm);
#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
-#include <linux/gfp.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/rcupdate.h>
*
* 0: tag not present or not set
* 1: tag set
+ *
+ * Note that the return value of this function may not be relied on, even if
+ * the RCU lock is held, unless tag modification and node deletion are excluded
+ * from concurrency.
*/
int radix_tree_tag_get(struct radix_tree_root *root,
unsigned long index, unsigned int tag)
*/
if (!tag_get(node, tag, offset))
saw_unset_tag = 1;
- if (height == 1) {
- int ret = tag_get(node, tag, offset);
-
- BUG_ON(ret && saw_unset_tag);
- return !!ret;
- }
+ if (height == 1)
+ return !!tag_get(node, tag, offset);
node = rcu_dereference_raw(node->slots[offset]);
shift -= RADIX_TREE_MAP_SHIFT;
height--;
/*
* __ratelimit - rate limiting
* @rs: ratelimit_state data
+ * @func: name of calling function
*
- * This enforces a rate limit: not more than @rs->ratelimit_burst callbacks
- * in every @rs->ratelimit_jiffies
+ * This enforces a rate limit: not more than @rs->burst callbacks
+ * in every @rs->interval
+ *
+ * RETURNS:
+ * 0 means callbacks will be suppressed.
+ * 1 means go ahead and do it.
*/
int ___ratelimit(struct ratelimit_state *rs, const char *func)
{
* the entity that is holding the lock already:
*/
if (!spin_trylock_irqsave(&rs->lock, flags))
- return 1;
+ return 0;
if (!rs->begin)
rs->begin = jiffies;
{
struct rwsem_waiter waiter;
struct task_struct *tsk;
+ unsigned long flags;
- spin_lock_irq(&sem->wait_lock);
+ spin_lock_irqsave(&sem->wait_lock, flags);
if (sem->activity >= 0 && list_empty(&sem->wait_list)) {
/* granted */
sem->activity++;
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
goto out;
}
list_add_tail(&waiter.list, &sem->wait_list);
/* we don't need to touch the semaphore struct anymore */
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
/* wait to be given the lock */
for (;;) {
{
struct rwsem_waiter waiter;
struct task_struct *tsk;
+ unsigned long flags;
- spin_lock_irq(&sem->wait_lock);
+ spin_lock_irqsave(&sem->wait_lock, flags);
if (sem->activity == 0 && list_empty(&sem->wait_list)) {
/* granted */
sem->activity = -1;
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
goto out;
}
list_add_tail(&waiter.list, &sem->wait_list);
/* we don't need to touch the semaphore struct anymore */
- spin_unlock_irq(&sem->wait_lock);
+ spin_unlock_irqrestore(&sem->wait_lock, flags);
/* wait to be given the lock */
for (;;) {
* Version 2. See the file COPYING for more details.
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/highmem.h>
#include <linux/types.h>
#include <linux/ctype.h>
#include <linux/highmem.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <linux/rcupdate.h>
#include <linux/err.h>
#include <linux/textsearch.h>
+#include <linux/slab.h>
static LIST_HEAD(ts_ops);
static DEFINE_SPINLOCK(ts_mod_lock);
return simple_strtoull(cp, endp, base);
}
+EXPORT_SYMBOL(simple_strtoll);
/**
* strict_strtoul - convert a string to an unsigned long strictly
};
struct printf_spec {
- u16 type;
- s16 field_width; /* width of output field */
+ u8 type; /* format_type enum */
u8 flags; /* flags to number() */
- u8 base;
- s8 precision; /* # of digits/chars */
- u8 qualifier;
+ u8 base; /* number base, 8, 10 or 16 only */
+ u8 qualifier; /* number qualifier, one of 'hHlLtzZ' */
+ s16 field_width; /* width of output field */
+ s16 precision; /* # of digits/chars */
};
static char *number(char *buf, char *end, unsigned long long num,
obj-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o
obj-$(CONFIG_FS_XIP) += filemap_xip.o
obj-$(CONFIG_MIGRATION) += migrate.o
-obj-$(CONFIG_SMP) += percpu.o
+ifdef CONFIG_SMP
+obj-y += percpu.o
+else
+obj-y += percpu_up.o
+endif
obj-$(CONFIG_QUICKLIST) += quicklist.o
obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o
#include <linux/writeback.h>
#include <linux/device.h>
+static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
+
void default_unplug_io_fn(struct backing_dev_info *bdi, struct page *page)
{
}
};
EXPORT_SYMBOL_GPL(default_backing_dev_info);
+struct backing_dev_info noop_backing_dev_info = {
+ .name = "noop",
+};
+EXPORT_SYMBOL_GPL(noop_backing_dev_info);
+
static struct class *bdi_class;
/*
static __init int bdi_class_init(void)
{
bdi_class = class_create(THIS_MODULE, "bdi");
+ if (IS_ERR(bdi_class))
+ return PTR_ERR(bdi_class);
+
bdi_class->dev_attrs = bdi_dev_attrs;
bdi_debug_init();
return 0;
}
EXPORT_SYMBOL(bdi_destroy);
+/*
+ * For use from filesystems to quickly init and register a bdi associated
+ * with dirty writeback
+ */
+int bdi_setup_and_register(struct backing_dev_info *bdi, char *name,
+ unsigned int cap)
+{
+ char tmp[32];
+ int err;
+
+ bdi->name = name;
+ bdi->capabilities = cap;
+ err = bdi_init(bdi);
+ if (err)
+ return err;
+
+ sprintf(tmp, "%.28s%s", name, "-%d");
+ err = bdi_register(bdi, NULL, tmp, atomic_long_inc_return(&bdi_seq));
+ if (err) {
+ bdi_destroy(bdi);
+ return err;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(bdi_setup_and_register);
+
static wait_queue_head_t congestion_wqh[2] = {
__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[0]),
__WAIT_QUEUE_HEAD_INITIALIZER(congestion_wqh[1])
*/
#include <linux/init.h>
#include <linux/pfn.h>
+#include <linux/slab.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/kmemleak.h>
end_aligned = end & ~(BITS_PER_LONG - 1);
if (end_aligned <= start_aligned) {
-#if 1
- printk(KERN_DEBUG " %lx - %lx\n", start, end);
-#endif
for (i = start; i < end; i++)
__free_pages_bootmem(pfn_to_page(i), 0);
return;
}
-#if 1
- printk(KERN_DEBUG " %lx %lx - %lx %lx\n",
- start, start_aligned, end_aligned, end);
-#endif
for (i = start; i < start_aligned; i++)
__free_pages_bootmem(pfn_to_page(i), 0);
unsigned long __init free_all_bootmem(void)
{
#ifdef CONFIG_NO_BOOTMEM
- return free_all_memory_core_early(NODE_DATA(0)->node_id);
+ /*
+ * We need to use MAX_NUMNODES instead of NODE_DATA(0)->node_id
+ * because in some case like Node0 doesnt have RAM installed
+ * low ram will be on Node1
+ * Use MAX_NUMNODES will make sure all ranges in early_node_map[]
+ * will be used instead of only Node0 related
+ */
+ return free_all_memory_core_early(MAX_NUMNODES);
#else
- return free_all_bootmem_core(NODE_DATA(0)->bdata);
+ unsigned long total_pages = 0;
+ bootmem_data_t *bdata;
+
+ list_for_each_entry(bdata, &bdata_list, list)
+ total_pages += free_all_bootmem_core(bdata);
+
+ return total_pages;
#endif
}
{
#ifdef CONFIG_NO_BOOTMEM
free_early(physaddr, physaddr + size);
-#if 0
- printk(KERN_DEBUG "free %lx %lx\n", physaddr, size);
-#endif
#else
unsigned long start, end;
{
#ifdef CONFIG_NO_BOOTMEM
free_early(addr, addr + size);
-#if 0
- printk(KERN_DEBUG "free %lx %lx\n", addr, size);
-#endif
#else
unsigned long start, end;
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/swap.h>
+#include <linux/gfp.h>
#include <linux/bio.h>
#include <linux/pagemap.h>
#include <linux/mempool.h>
#include <linux/fault-inject.h>
-#include <linux/gfp.h>
#include <linux/slab.h>
static struct {
* the NFS filesystem used to do this differently, for example)
*/
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/compiler.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
#include <linux/aio.h>
#include <linux/capability.h>
#include <linux/kernel_stat.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/mman.h>
#include <linux/sched.h>
#include <linux/seqlock.h>
#include <linux/mutex.h>
+#include <linux/gfp.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
* Generic hugetlb support.
* (C) William Irwin, April 2004
*/
-#include <linux/gfp.h>
#include <linux/list.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/bootmem.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <asm/page.h>
#include <asm/pgtable.h>
mapping = (struct address_space *) page_private(page);
set_page_private(page, 0);
+ page->mapping = NULL;
BUG_ON(page_count(page));
INIT_LIST_HEAD(&page->lru);
spin_lock(&inode->i_lock);
inode->i_blocks += blocks_per_huge_page(h);
spin_unlock(&inode->i_lock);
- } else
+ } else {
lock_page(page);
+ page->mapping = HUGETLB_POISON;
+ }
}
/*
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/prio_tree.h>
-#include <linux/gfp.h>
#include <linux/fs.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
do {
cond_resched();
page = follow_page(vma, addr, FOLL_GET);
- if (!page)
+ if (IS_ERR_OR_NULL(page))
break;
if (PageKsm(page))
ret = handle_mm_fault(vma->vm_mm, vma, addr,
goto out;
page = follow_page(vma, addr, FOLL_GET);
- if (!page)
+ if (IS_ERR_OR_NULL(page))
goto out;
if (PageAnon(page)) {
flush_anon_page(vma, page, addr);
* page
*/
if (page_mapcount(page) + 1 + swapped != page_count(page)) {
- set_pte_at_notify(mm, addr, ptep, entry);
+ set_pte_at(mm, addr, ptep, entry);
goto out_unlock;
}
entry = pte_wrprotect(entry);
cond_resched();
tree_rmap_item = rb_entry(*new, struct rmap_item, node);
tree_page = get_mergeable_page(tree_rmap_item);
- if (!tree_page)
+ if (IS_ERR_OR_NULL(tree_page))
return NULL;
/*
if (ksm_test_exit(mm))
break;
*page = follow_page(vma, ksm_scan.address, FOLL_GET);
- if (*page && PageAnon(*page)) {
+ if (!IS_ERR_OR_NULL(*page) && PageAnon(*page)) {
flush_anon_page(vma, *page, ksm_scan.address);
flush_dcache_page(*page);
rmap_item = get_next_rmap_item(slot,
up_read(&mm->mmap_sem);
return rmap_item;
}
- if (*page)
+ if (!IS_ERR_OR_NULL(*page))
put_page(*page);
ksm_scan.address += PAGE_SIZE;
cond_resched();
static void ksm_do_scan(unsigned int scan_npages)
{
struct rmap_item *rmap_item;
- struct page *page;
+ struct page *uninitialized_var(page);
while (scan_npages--) {
cond_resched();
* enabled in "curr" and "curr" is a child of "mem" in *cgroup*
* hierarchy(even if use_hierarchy is disabled in "mem").
*/
+ rcu_read_lock();
if (mem->use_hierarchy)
ret = css_is_ancestor(&curr->css, &mem->css);
else
ret = (curr == mem);
+ rcu_read_unlock();
css_put(&curr->css);
return ret;
}
lock_page_cgroup(pc);
mem = pc->mem_cgroup;
- if (!mem)
- goto done;
-
- if (!PageCgroupUsed(pc))
+ if (!mem || !PageCgroupUsed(pc))
goto done;
/*
* Preemption is already disabled. We can use __this_cpu_xxx
*/
- __this_cpu_add(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED], val);
+ if (val > 0) {
+ __this_cpu_inc(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
+ SetPageCgroupFileMapped(pc);
+ } else {
+ __this_cpu_dec(mem->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
+ ClearPageCgroupFileMapped(pc);
+ }
done:
unlock_page_cgroup(pc);
static void __mem_cgroup_move_account(struct page_cgroup *pc,
struct mem_cgroup *from, struct mem_cgroup *to, bool uncharge)
{
- struct page *page;
-
VM_BUG_ON(from == to);
VM_BUG_ON(PageLRU(pc->page));
VM_BUG_ON(!PageCgroupLocked(pc));
VM_BUG_ON(!PageCgroupUsed(pc));
VM_BUG_ON(pc->mem_cgroup != from);
- page = pc->page;
- if (page_mapped(page) && !PageAnon(page)) {
+ if (PageCgroupFileMapped(pc)) {
/* Update mapped_file data for mem_cgroup */
preempt_disable();
__this_cpu_dec(from->stat->count[MEM_CGROUP_STAT_FILE_MAPPED]);
/* record memcg information */
if (do_swap_account && swapout && memcg) {
+ rcu_read_lock();
swap_cgroup_record(ent, css_id(&memcg->css));
+ rcu_read_unlock();
mem_cgroup_get(memcg);
}
if (swapout && memcg)
{
unsigned short old_id, new_id;
+ rcu_read_lock();
old_id = css_id(&from->css);
new_id = css_id(&to->css);
+ rcu_read_unlock();
if (swap_cgroup_cmpxchg(entry, old_id, new_id) == old_id) {
mem_cgroup_swap_statistics(from, false);
}
unlock_page_cgroup(pc);
+ *ptr = mem;
if (mem) {
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
+ ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, ptr, false);
css_put(&mem->css);
}
- *ptr = mem;
return ret;
}
else
mem = vmalloc(size);
- if (mem)
- memset(mem, 0, size);
+ if (!mem)
+ return NULL;
+
+ memset(mem, 0, size);
mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
if (!mem->stat) {
if (size < PAGE_SIZE)
}
return ret;
}
-#else /* !CONFIG_MMU */
-static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
- struct cgroup *cgroup,
- struct task_struct *p,
- bool threadgroup)
-{
- return 0;
-}
-static void mem_cgroup_cancel_attach(struct cgroup_subsys *ss,
- struct cgroup *cgroup,
- struct task_struct *p,
- bool threadgroup)
-{
-}
-static void mem_cgroup_move_task(struct cgroup_subsys *ss,
- struct cgroup *cont,
- struct cgroup *old_cont,
- struct task_struct *p,
- bool threadgroup)
-{
-}
-#endif
/**
* is_target_pte_for_mc - check a pte whether it is valid for move charge
put_page(page);
}
/* throught */
- if (ent.val && do_swap_account && !ret &&
- css_id(&mc.from->css) == lookup_swap_cgroup(ent)) {
- ret = MC_TARGET_SWAP;
- if (target)
- target->ent = ent;
+ if (ent.val && do_swap_account && !ret) {
+ unsigned short id;
+ rcu_read_lock();
+ id = css_id(&mc.from->css);
+ rcu_read_unlock();
+ if (id == lookup_swap_cgroup(ent)) {
+ ret = MC_TARGET_SWAP;
+ if (target)
+ target->ent = ent;
+ }
}
return ret;
}
}
mem_cgroup_clear_mc();
}
+#else /* !CONFIG_MMU */
+static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
+ struct cgroup *cgroup,
+ struct task_struct *p,
+ bool threadgroup)
+{
+ return 0;
+}
+static void mem_cgroup_cancel_attach(struct cgroup_subsys *ss,
+ struct cgroup *cgroup,
+ struct task_struct *p,
+ bool threadgroup)
+{
+}
+static void mem_cgroup_move_task(struct cgroup_subsys *ss,
+ struct cgroup *cont,
+ struct cgroup *old_cont,
+ struct task_struct *p,
+ bool threadgroup)
+{
+}
+#endif
struct cgroup_subsys mem_cgroup_subsys = {
.name = "memory",
#include <linux/migrate.h>
#include <linux/page-isolation.h>
#include <linux/suspend.h>
+#include <linux/slab.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
#include <linux/kallsyms.h>
#include <linux/swapops.h>
#include <linux/elf.h>
+#include <linux/gfp.h>
#include <asm/io.h>
#include <asm/pgalloc.h>
#if defined(SPLIT_RSS_COUNTING)
-void __sync_task_rss_stat(struct task_struct *task, struct mm_struct *mm)
+static void __sync_task_rss_stat(struct task_struct *task, struct mm_struct *mm)
{
int i;
#include <linux/sched.h>
#include <linux/nodemask.h>
#include <linux/cpuset.h>
-#include <linux/gfp.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/module.h>
err = 0;
if (nmask) {
- task_lock(current);
- get_policy_nodemask(pol, nmask);
- task_unlock(current);
+ if (mpol_store_user_nodemask(pol)) {
+ *nmask = pol->w.user_nodemask;
+ } else {
+ task_lock(current);
+ get_policy_nodemask(pol, nmask);
+ task_unlock(current);
+ }
}
out:
char *rest = nodelist;
while (isdigit(*rest))
rest++;
- if (!*rest)
- err = 0;
+ if (*rest)
+ goto out;
}
break;
case MPOL_INTERLEAVE:
*/
if (!nodelist)
nodes = node_states[N_HIGH_MEMORY];
- err = 0;
break;
case MPOL_LOCAL:
/*
goto out;
mode = MPOL_PREFERRED;
break;
-
- /*
- * case MPOL_BIND: mpol_new() enforces non-empty nodemask.
- * case MPOL_DEFAULT: mpol_new() enforces empty nodemask, ignores flags.
- */
+ case MPOL_DEFAULT:
+ /*
+ * Insist on a empty nodelist
+ */
+ if (!nodelist)
+ err = 0;
+ goto out;
+ case MPOL_BIND:
+ /*
+ * Insist on a nodelist
+ */
+ if (!nodelist)
+ goto out;
}
mode_flags = 0;
else if (!strcmp(flags, "relative"))
mode_flags |= MPOL_F_RELATIVE_NODES;
else
- err = 1;
+ goto out;
}
new = mpol_new(mode, mode_flags, &nodes);
if (IS_ERR(new))
- err = 1;
- else {
+ goto out;
+
+ {
int ret;
NODEMASK_SCRATCH(scratch);
if (scratch) {
ret = -ENOMEM;
NODEMASK_SCRATCH_FREE(scratch);
if (ret) {
- err = 1;
mpol_put(new);
- } else if (no_context) {
- /* save for contextualization */
- new->w.user_nodemask = nodes;
+ goto out;
}
}
+ err = 0;
+ if (no_context) {
+ /* save for contextualization */
+ new->w.user_nodemask = nodes;
+ }
out:
/* Restore string for error message */
#include <linux/security.h>
#include <linux/memcontrol.h>
#include <linux/syscalls.h>
+#include <linux/gfp.h>
#include "internal.h"
/*
* The mincore() system call.
*/
-#include <linux/slab.h>
#include <linux/pagemap.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/mman.h>
#include <linux/syscalls.h>
struct address_space *mapping = NULL;
struct prio_tree_root *root = NULL;
struct file *file = vma->vm_file;
- struct anon_vma *anon_vma = NULL;
long adjust_next = 0;
int remove_next = 0;
if (next && !insert) {
+ struct vm_area_struct *exporter = NULL;
+
if (end >= next->vm_end) {
/*
* vma expands, overlapping all the next, and
*/
again: remove_next = 1 + (end > next->vm_end);
end = next->vm_end;
- anon_vma = next->anon_vma;
+ exporter = next;
importer = vma;
} else if (end > next->vm_start) {
/*
* mprotect case 5 shifting the boundary up.
*/
adjust_next = (end - next->vm_start) >> PAGE_SHIFT;
- anon_vma = next->anon_vma;
+ exporter = next;
importer = vma;
} else if (end < vma->vm_end) {
/*
* mprotect case 4 shifting the boundary down.
*/
adjust_next = - ((vma->vm_end - end) >> PAGE_SHIFT);
- anon_vma = next->anon_vma;
+ exporter = vma;
importer = next;
}
- }
- /*
- * When changing only vma->vm_end, we don't really need anon_vma lock.
- */
- if (vma->anon_vma && (insert || importer || start != vma->vm_start))
- anon_vma = vma->anon_vma;
- if (anon_vma) {
/*
* Easily overlooked: when mprotect shifts the boundary,
* make sure the expanding vma has anon_vma set if the
* shrinking vma had, to cover any anon pages imported.
*/
- if (importer && !importer->anon_vma) {
- /* Block reverse map lookups until things are set up. */
- if (anon_vma_clone(importer, vma)) {
+ if (exporter && exporter->anon_vma && !importer->anon_vma) {
+ if (anon_vma_clone(importer, exporter))
return -ENOMEM;
- }
- importer->anon_vma = anon_vma;
+ importer->anon_vma = exporter->anon_vma;
}
}
return NULL;
}
+/*
+ * Rough compatbility check to quickly see if it's even worth looking
+ * at sharing an anon_vma.
+ *
+ * They need to have the same vm_file, and the flags can only differ
+ * in things that mprotect may change.
+ *
+ * NOTE! The fact that we share an anon_vma doesn't _have_ to mean that
+ * we can merge the two vma's. For example, we refuse to merge a vma if
+ * there is a vm_ops->close() function, because that indicates that the
+ * driver is doing some kind of reference counting. But that doesn't
+ * really matter for the anon_vma sharing case.
+ */
+static int anon_vma_compatible(struct vm_area_struct *a, struct vm_area_struct *b)
+{
+ return a->vm_end == b->vm_start &&
+ mpol_equal(vma_policy(a), vma_policy(b)) &&
+ a->vm_file == b->vm_file &&
+ !((a->vm_flags ^ b->vm_flags) & ~(VM_READ|VM_WRITE|VM_EXEC)) &&
+ b->vm_pgoff == a->vm_pgoff + ((b->vm_start - a->vm_start) >> PAGE_SHIFT);
+}
+
+/*
+ * Do some basic sanity checking to see if we can re-use the anon_vma
+ * from 'old'. The 'a'/'b' vma's are in VM order - one of them will be
+ * the same as 'old', the other will be the new one that is trying
+ * to share the anon_vma.
+ *
+ * NOTE! This runs with mm_sem held for reading, so it is possible that
+ * the anon_vma of 'old' is concurrently in the process of being set up
+ * by another page fault trying to merge _that_. But that's ok: if it
+ * is being set up, that automatically means that it will be a singleton
+ * acceptable for merging, so we can do all of this optimistically. But
+ * we do that ACCESS_ONCE() to make sure that we never re-load the pointer.
+ *
+ * IOW: that the "list_is_singular()" test on the anon_vma_chain only
+ * matters for the 'stable anon_vma' case (ie the thing we want to avoid
+ * is to return an anon_vma that is "complex" due to having gone through
+ * a fork).
+ *
+ * We also make sure that the two vma's are compatible (adjacent,
+ * and with the same memory policies). That's all stable, even with just
+ * a read lock on the mm_sem.
+ */
+static struct anon_vma *reusable_anon_vma(struct vm_area_struct *old, struct vm_area_struct *a, struct vm_area_struct *b)
+{
+ if (anon_vma_compatible(a, b)) {
+ struct anon_vma *anon_vma = ACCESS_ONCE(old->anon_vma);
+
+ if (anon_vma && list_is_singular(&old->anon_vma_chain))
+ return anon_vma;
+ }
+ return NULL;
+}
+
/*
* find_mergeable_anon_vma is used by anon_vma_prepare, to check
* neighbouring vmas for a suitable anon_vma, before it goes off
*/
struct anon_vma *find_mergeable_anon_vma(struct vm_area_struct *vma)
{
+ struct anon_vma *anon_vma;
struct vm_area_struct *near;
- unsigned long vm_flags;
near = vma->vm_next;
if (!near)
goto try_prev;
- /*
- * Since only mprotect tries to remerge vmas, match flags
- * which might be mprotected into each other later on.
- * Neither mlock nor madvise tries to remerge at present,
- * so leave their flags as obstructing a merge.
- */
- vm_flags = vma->vm_flags & ~(VM_READ|VM_WRITE|VM_EXEC);
- vm_flags |= near->vm_flags & (VM_READ|VM_WRITE|VM_EXEC);
-
- if (near->anon_vma && vma->vm_end == near->vm_start &&
- mpol_equal(vma_policy(vma), vma_policy(near)) &&
- can_vma_merge_before(near, vm_flags,
- NULL, vma->vm_file, vma->vm_pgoff +
- ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT)))
- return near->anon_vma;
+ anon_vma = reusable_anon_vma(near, vma, near);
+ if (anon_vma)
+ return anon_vma;
try_prev:
/*
* It is potentially slow to have to call find_vma_prev here.
if (!near)
goto none;
- vm_flags = vma->vm_flags & ~(VM_READ|VM_WRITE|VM_EXEC);
- vm_flags |= near->vm_flags & (VM_READ|VM_WRITE|VM_EXEC);
-
- if (near->anon_vma && near->vm_end == vma->vm_start &&
- mpol_equal(vma_policy(near), vma_policy(vma)) &&
- can_vma_merge_after(near, vm_flags,
- NULL, vma->vm_file, vma->vm_pgoff))
- return near->anon_vma;
+ anon_vma = reusable_anon_vma(near, near, vma);
+ if (anon_vma)
+ return anon_vma;
none:
/*
* There's no absolute need to look only at touching neighbours:
return 0;
/* Clean everything up if vma_adjust failed. */
- new->vm_ops->close(new);
+ if (new->vm_ops && new->vm_ops->close)
+ new->vm_ops->close(new);
if (new->vm_file) {
if (vma->vm_flags & VM_EXECUTABLE)
removed_exe_file_vma(mm);
struct task_struct *tsk = current;
task_lock(tsk);
+ sync_mm_rss(tsk, mm);
tsk->mm = NULL;
/* active_mm is still 'mm' */
enter_lazy_tlb(mm, tsk);
#include <linux/err.h>
#include <linux/rcupdate.h>
#include <linux/sched.h>
+#include <linux/slab.h>
/*
* This function can't run concurrently against mmu_notifier_register
#include <linux/mm.h>
#include <linux/hugetlb.h>
-#include <linux/slab.h>
#include <linux/shm.h>
#include <linux/mman.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
-#include <linux/slab.h>
#include <linux/shm.h>
#include <linux/ksm.h>
#include <linux/mman.h>
(VM_MAYREAD | VM_MAYWRITE) : (VM_READ | VM_WRITE);
for (i = 0; i < nr_pages; i++) {
- vma = find_extend_vma(mm, start);
+ vma = find_vma(mm, start);
if (!vma)
goto finish_or_fault;
}
if (vmas)
vmas[i] = vma;
- start += PAGE_SIZE;
+ start = (start + PAGE_SIZE) & PAGE_MASK;
}
return i;
*/
struct vm_area_struct *find_extend_vma(struct mm_struct *mm, unsigned long addr)
{
- return find_vma(mm, addr & PAGE_MASK);
+ return find_vma(mm, addr);
}
/*
if (ret != -ENOSYS)
return ret;
- /* getting an ENOSYS error indicates that direct mmap isn't
- * possible (as opposed to tried but failed) so we'll fall
- * through to making a private copy of the data and mapping
- * that if we can */
+ /* getting -ENOSYS indicates that direct mmap isn't possible (as
+ * opposed to tried but failed) so we can only give a suitable error as
+ * it's not possible to make a private copy if MAP_SHARED was given */
return -ENODEV;
}
#include <linux/oom.h>
#include <linux/mm.h>
#include <linux/err.h>
+#include <linux/gfp.h>
#include <linux/sched.h>
#include <linux/swap.h>
#include <linux/timex.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>
+#include <linux/gfp.h>
#include <linux/pagemap.h>
#include <linux/swap.h>
#include <linux/bio.h>
return err;
}
+#ifdef CONFIG_HUGETLB_PAGE
+static unsigned long hugetlb_entry_end(struct hstate *h, unsigned long addr,
+ unsigned long end)
+{
+ unsigned long boundary = (addr & huge_page_mask(h)) + huge_page_size(h);
+ return boundary < end ? boundary : end;
+}
+
+static int walk_hugetlb_range(struct vm_area_struct *vma,
+ unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
+{
+ struct hstate *h = hstate_vma(vma);
+ unsigned long next;
+ unsigned long hmask = huge_page_mask(h);
+ pte_t *pte;
+ int err = 0;
+
+ do {
+ next = hugetlb_entry_end(h, addr, end);
+ pte = huge_pte_offset(walk->mm, addr & hmask);
+ if (pte && walk->hugetlb_entry)
+ err = walk->hugetlb_entry(pte, hmask, addr, next, walk);
+ if (err)
+ return err;
+ } while (addr = next, addr != end);
+
+ return 0;
+}
+#endif
+
/**
* walk_page_range - walk a memory map's page tables with a callback
* @mm: memory map to walk
vma = find_vma(walk->mm, addr);
#ifdef CONFIG_HUGETLB_PAGE
if (vma && is_vm_hugetlb_page(vma)) {
- pte_t *pte;
- struct hstate *hs;
-
if (vma->vm_end < next)
next = vma->vm_end;
- hs = hstate_vma(vma);
- pte = huge_pte_offset(walk->mm,
- addr & huge_page_mask(hs));
- if (pte && !huge_pte_none(huge_ptep_get(pte))
- && walk->hugetlb_entry)
- err = walk->hugetlb_entry(pte, addr,
- next, walk);
+ /*
+ * Hugepage is very tightly coupled with vma, so
+ * walk through hugetlb entries within a given vma.
+ */
+ err = walk_hugetlb_range(vma, addr, next, walk);
if (err)
break;
+ pgd = pgd_offset(walk->mm, next);
continue;
}
#endif
}
EXPORT_SYMBOL_GPL(free_percpu);
+/**
+ * is_kernel_percpu_address - test whether address is from static percpu area
+ * @addr: address to test
+ *
+ * Test whether @addr belongs to in-kernel static percpu area. Module
+ * static percpu areas are not considered. For those, use
+ * is_module_percpu_address().
+ *
+ * RETURNS:
+ * %true if @addr is from in-kernel static percpu area, %false otherwise.
+ */
+bool is_kernel_percpu_address(unsigned long addr)
+{
+ const size_t static_size = __per_cpu_end - __per_cpu_start;
+ void __percpu *base = __addr_to_pcpu_ptr(pcpu_base_addr);
+ unsigned int cpu;
+
+ for_each_possible_cpu(cpu) {
+ void *start = per_cpu_ptr(base, cpu);
+
+ if ((void *)addr >= start && (void *)addr < start + static_size)
+ return true;
+ }
+ return false;
+}
+
/**
* per_cpu_ptr_to_phys - convert translated percpu address to physical address
* @addr: the address to be converted to physical address
--- /dev/null
+/*
+ * mm/percpu_up.c - dummy percpu memory allocator implementation for UP
+ */
+
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
+
+void __percpu *__alloc_percpu(size_t size, size_t align)
+{
+ /*
+ * Can't easily make larger alignment work with kmalloc. WARN
+ * on it. Larger alignment should only be used for module
+ * percpu sections on SMP for which this path isn't used.
+ */
+ WARN_ON_ONCE(align > SMP_CACHE_BYTES);
+ return kzalloc(size, GFP_KERNEL);
+}
+EXPORT_SYMBOL_GPL(__alloc_percpu);
+
+void free_percpu(void __percpu *p)
+{
+ kfree(p);
+}
+EXPORT_SYMBOL_GPL(free_percpu);
+
+phys_addr_t per_cpu_ptr_to_phys(void *addr)
+{
+ return __pa(addr);
+}
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/blkdev.h>
return;
/* be dumb */
- if (filp->f_mode & FMODE_RANDOM) {
+ if (filp && (filp->f_mode & FMODE_RANDOM)) {
force_page_cache_readahead(mapping, filp, offset, req_size);
return;
}
goto out_enomem_free_avc;
allocated = anon_vma;
}
- spin_lock(&anon_vma->lock);
+ spin_lock(&anon_vma->lock);
/* page_table_lock to protect against threads */
spin_lock(&mm->page_table_lock);
if (likely(!vma->anon_vma)) {
list_add(&avc->same_vma, &vma->anon_vma_chain);
list_add(&avc->same_anon_vma, &anon_vma->head);
allocated = NULL;
+ avc = NULL;
}
spin_unlock(&mm->page_table_lock);
-
spin_unlock(&anon_vma->lock);
- if (unlikely(allocated)) {
+
+ if (unlikely(allocated))
anon_vma_free(allocated);
+ if (unlikely(avc))
anon_vma_chain_free(avc);
- }
}
return 0;
{
struct anon_vma_chain *avc, *pavc;
- list_for_each_entry(pavc, &src->anon_vma_chain, same_vma) {
+ list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
avc = anon_vma_chain_alloc();
if (!avc)
goto enomem_failure;
out_error_free_anon_vma:
anon_vma_free(anon_vma);
out_error:
+ unlink_anon_vmas(vma);
return -ENOMEM;
}
* @page: the page to add the mapping to
* @vma: the vm area in which the mapping is added
* @address: the user virtual address mapped
+ * @exclusive: the page is exclusively owned by the current process
*/
static void __page_set_anon_rmap(struct page *page,
- struct vm_area_struct *vma, unsigned long address)
+ struct vm_area_struct *vma, unsigned long address, int exclusive)
{
struct anon_vma *anon_vma = vma->anon_vma;
BUG_ON(!anon_vma);
+
+ /*
+ * If the page isn't exclusively mapped into this vma,
+ * we must use the _oldest_ possible anon_vma for the
+ * page mapping!
+ *
+ * So take the last AVC chain entry in the vma, which is
+ * the deepest ancestor, and use the anon_vma from that.
+ */
+ if (!exclusive) {
+ struct anon_vma_chain *avc;
+ avc = list_entry(vma->anon_vma_chain.prev, struct anon_vma_chain, same_vma);
+ anon_vma = avc->anon_vma;
+ }
+
anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
page->mapping = (struct address_space *) anon_vma;
page->index = linear_page_index(vma, address);
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(address < vma->vm_start || address >= vma->vm_end);
if (first)
- __page_set_anon_rmap(page, vma, address);
+ __page_set_anon_rmap(page, vma, address, 0);
else
__page_check_anon_rmap(page, vma, address);
}
SetPageSwapBacked(page);
atomic_set(&page->_mapcount, 0); /* increment count (starts at -1) */
__inc_zone_page_state(page, NR_ANON_PAGES);
- __page_set_anon_rmap(page, vma, address);
+ __page_set_anon_rmap(page, vma, address, 1);
if (page_evictable(page, vma))
lru_cache_add_lru(page, LRU_ACTIVE_ANON);
else
*/
int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr)
{
- unsigned long addr = (unsigned long)ptr;
- unsigned long min_addr = PAGE_OFFSET;
- unsigned long align_mask = BYTES_PER_WORD - 1;
unsigned long size = cachep->buffer_size;
struct page *page;
- if (unlikely(addr < min_addr))
- goto out;
- if (unlikely(addr > (unsigned long)high_memory - size))
- goto out;
- if (unlikely(addr & align_mask))
- goto out;
- if (unlikely(!kern_addr_valid(addr)))
- goto out;
- if (unlikely(!kern_addr_valid(addr + size - 1)))
+ if (unlikely(!kern_ptr_validate(ptr, size)))
goto out;
page = virt_to_page(ptr);
if (unlikely(!PageSlab(page)))
int local_node;
if (slab_state >= UP && (s < kmalloc_caches ||
- s > kmalloc_caches + KMALLOC_CACHES))
+ s >= kmalloc_caches + KMALLOC_CACHES))
local_node = page_to_nid(virt_to_page(s));
else
local_node = 0;
{
struct page *page;
+ if (!kern_ptr_validate(object, s->size))
+ return 0;
+
page = get_object_page(object);
if (!page || s != page->slab)
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/vmalloc.h>
#include <linux/sched.h>
* sparse memory mappings.
*/
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/mmzone.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/notifier.h>
#include <linux/backing-dev.h>
#include <linux/memcontrol.h>
+#include <linux/gfp.h>
#include "internal.h"
*/
#include <linux/module.h>
#include <linux/mm.h>
+#include <linux/gfp.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/swapops.h>
#include <linux/kernel.h>
#include <linux/backing-dev.h>
+#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/module.h>
}
EXPORT_SYMBOL(kzfree);
+int kern_ptr_validate(const void *ptr, unsigned long size)
+{
+ unsigned long addr = (unsigned long)ptr;
+ unsigned long min_addr = PAGE_OFFSET;
+ unsigned long align_mask = sizeof(void *) - 1;
+
+ if (unlikely(addr < min_addr))
+ goto out;
+ if (unlikely(addr > (unsigned long)high_memory - size))
+ goto out;
+ if (unlikely(addr & align_mask))
+ goto out;
+ if (unlikely(!kern_addr_valid(addr)))
+ goto out;
+ if (unlikely(!kern_addr_valid(addr + size - 1)))
+ goto out;
+ return 1;
+out:
+ return 0;
+}
+
/*
* strndup_user - duplicate an existing string from user space
* @s: The string to duplicate
#include <linux/mm.h>
#include <linux/module.h>
-#include <linux/slab.h>
+#include <linux/gfp.h>
#include <linux/kernel_stat.h>
#include <linux/swap.h>
#include <linux/pagemap.h>
unsigned long ap, fp;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
- /* If we have no swap space, do not bother scanning anon pages. */
- if (!sc->may_swap || (nr_swap_pages <= 0)) {
- percent[0] = 0;
- percent[1] = 100;
- return;
- }
-
anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
unsigned long nr_reclaimed = sc->nr_reclaimed;
unsigned long nr_to_reclaim = sc->nr_to_reclaim;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
+ int noswap = 0;
- get_scan_ratio(zone, sc, percent);
+ /* If we have no swap space, do not bother scanning anon pages. */
+ if (!sc->may_swap || (nr_swap_pages <= 0)) {
+ noswap = 1;
+ percent[0] = 0;
+ percent[1] = 100;
+ } else
+ get_scan_ratio(zone, sc, percent);
for_each_evictable_lru(l) {
int file = is_file_lru(l);
unsigned long scan;
- if (percent[file] == 0) {
- nr[l] = 0;
- continue;
- }
-
scan = zone_nr_lru_pages(zone, sc, l);
- if (priority) {
+ if (priority || noswap) {
scan >>= priority;
scan = (scan * percent[file]) / 100;
}
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/vmstat.h>
#include <linux/sched.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
#include <linux/llc.h>
+#include <linux/slab.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <net/garp.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/datalink.h>
#include <linux/mm.h>
#include <linux/in.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/datalink.h>
#include <net/p8022.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/datalink.h>
#include <net/llc.h>
#include <net/psnap.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/llc.h>
+#include <linux/slab.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <net/stp.h>
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/sysctl.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/net_namespace.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/rculist.h>
#include <net/p8022.h>
#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
#endif
+ vlandev->real_num_tx_queues = dev->real_num_tx_queues;
+ BUG_ON(vlandev->real_num_tx_queues > vlandev->num_tx_queues);
if (old_features != vlandev->features)
netdev_features_change(vlandev);
if (netpoll_rx(skb))
return NET_RX_DROP;
- if (skb_bond_should_drop(skb))
+ if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
goto drop;
skb->skb_iif = skb->dev->ifindex;
{
struct sk_buff *p;
- if (skb_bond_should_drop(skb))
+ if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
goto drop;
skb->skb_iif = skb->dev->ifindex;
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
return ret;
}
+static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ struct net_device *rdev = vlan_dev_info(dev)->real_dev;
+ const struct net_device_ops *ops = rdev->netdev_ops;
+
+ return ops->ndo_select_queue(rdev, skb);
+}
+
static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
{
/* TODO: gotta make sure the underlying layer can handle it,
.parse = eth_header_parse,
};
-static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops;
+static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops,
+ vlan_netdev_ops_sq, vlan_netdev_accel_ops_sq;
static int vlan_dev_init(struct net_device *dev)
{
if (real_dev->features & NETIF_F_HW_VLAN_TX) {
dev->header_ops = real_dev->header_ops;
dev->hard_header_len = real_dev->hard_header_len;
- dev->netdev_ops = &vlan_netdev_accel_ops;
+ if (real_dev->netdev_ops->ndo_select_queue)
+ dev->netdev_ops = &vlan_netdev_accel_ops_sq;
+ else
+ dev->netdev_ops = &vlan_netdev_accel_ops;
} else {
dev->header_ops = &vlan_header_ops;
dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
- dev->netdev_ops = &vlan_netdev_ops;
+ if (real_dev->netdev_ops->ndo_select_queue)
+ dev->netdev_ops = &vlan_netdev_ops_sq;
+ else
+ dev->netdev_ops = &vlan_netdev_ops;
}
if (is_vlan_dev(real_dev))
#endif
};
+static const struct net_device_ops vlan_netdev_ops_sq = {
+ .ndo_select_queue = vlan_dev_select_queue,
+ .ndo_change_mtu = vlan_dev_change_mtu,
+ .ndo_init = vlan_dev_init,
+ .ndo_uninit = vlan_dev_uninit,
+ .ndo_open = vlan_dev_open,
+ .ndo_stop = vlan_dev_stop,
+ .ndo_start_xmit = vlan_dev_hard_start_xmit,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = vlan_dev_set_mac_address,
+ .ndo_set_rx_mode = vlan_dev_set_rx_mode,
+ .ndo_set_multicast_list = vlan_dev_set_rx_mode,
+ .ndo_change_rx_flags = vlan_dev_change_rx_flags,
+ .ndo_do_ioctl = vlan_dev_ioctl,
+ .ndo_neigh_setup = vlan_dev_neigh_setup,
+ .ndo_get_stats = vlan_dev_get_stats,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
+ .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
+ .ndo_fcoe_enable = vlan_dev_fcoe_enable,
+ .ndo_fcoe_disable = vlan_dev_fcoe_disable,
+ .ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
+#endif
+};
+
+static const struct net_device_ops vlan_netdev_accel_ops_sq = {
+ .ndo_select_queue = vlan_dev_select_queue,
+ .ndo_change_mtu = vlan_dev_change_mtu,
+ .ndo_init = vlan_dev_init,
+ .ndo_uninit = vlan_dev_uninit,
+ .ndo_open = vlan_dev_open,
+ .ndo_stop = vlan_dev_stop,
+ .ndo_start_xmit = vlan_dev_hwaccel_hard_start_xmit,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = vlan_dev_set_mac_address,
+ .ndo_set_rx_mode = vlan_dev_set_rx_mode,
+ .ndo_set_multicast_list = vlan_dev_set_rx_mode,
+ .ndo_change_rx_flags = vlan_dev_change_rx_flags,
+ .ndo_do_ioctl = vlan_dev_ioctl,
+ .ndo_neigh_setup = vlan_dev_neigh_setup,
+ .ndo_get_stats = vlan_dev_get_stats,
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+ .ndo_fcoe_ddp_setup = vlan_dev_fcoe_ddp_setup,
+ .ndo_fcoe_ddp_done = vlan_dev_fcoe_ddp_done,
+ .ndo_fcoe_enable = vlan_dev_fcoe_enable,
+ .ndo_fcoe_disable = vlan_dev_fcoe_disable,
+ .ndo_fcoe_get_wwn = vlan_dev_fcoe_get_wwn,
+#endif
+};
+
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
#include <linux/poll.h>
#include <linux/idr.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/uaccess.h>
#include <net/9p/9p.h>
EXPORT_SYMBOL(p9_is_proto_dotu);
/* Interpret mount option for protocol version */
-static unsigned char get_protocol_version(const substring_t *name)
+static int get_protocol_version(const substring_t *name)
{
- unsigned char version = -EINVAL;
+ int version = -EINVAL;
+
if (!strncmp("9p2000", name->from, name->to-name->from)) {
version = p9_proto_legacy;
P9_DPRINTK(P9_DEBUG_9P, "Protocol version: Legacy\n");
P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type);
- if (c->status != Connected)
+ /* we allow for any status other than disconnected */
+ if (c->status == Disconnected)
+ return ERR_PTR(-EIO);
+
+ /* if status is begin_disconnected we allow only clunk request */
+ if ((c->status == BeginDisconnect) && (type != P9_TCLUNK))
return ERR_PTR(-EIO);
if (signal_pending(current)) {
v9fs_put_trans(clnt->trans_mod);
- list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist)
+ list_for_each_entry_safe(fid, fidptr, &clnt->fidlist, flist) {
+ printk(KERN_INFO "Found fid %d not clunked\n", fid->fid);
p9_fid_destroy(fid);
+ }
if (clnt->fidpool)
p9_idpool_destroy(clnt->fidpool);
}
EXPORT_SYMBOL(p9_client_disconnect);
+void p9_client_begin_disconnect(struct p9_client *clnt)
+{
+ P9_DPRINTK(P9_DEBUG_9P, "clnt %p\n", clnt);
+ clnt->status = BeginDisconnect;
+}
+EXPORT_SYMBOL(p9_client_begin_disconnect);
+
struct p9_fid *p9_client_attach(struct p9_client *clnt, struct p9_fid *afid,
char *uname, u32 n_uname, char *aname)
{
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <net/9p/9p.h>
#include <linux/idr.h>
#include <linux/file.h>
#include <linux/parser.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
#include <linux/file.h>
#include <linux/parser.h>
#include <linux/semaphore.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
#include <net/9p/transport.h>
#include <linux/inet.h>
#include <linux/idr.h>
#include <linux/file.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
#include <linux/parser.h>
#include <net/9p/client.h>
#include <linux/sched.h>
#include <linux/parser.h>
#include <linux/idr.h>
+#include <linux/slab.h>
#include <net/9p/9p.h>
/**
*/
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/datalink.h>
#include <net/psnap.h>
#include <linux/smp_lock.h>
#include <linux/termios.h> /* For TIOCOUTQ/INQ */
#include <linux/compat.h>
+#include <linux/slab.h>
#include <net/datalink.h>
#include <net/psnap.h>
#include <net/sock.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include "signaling.h"
/* ATM driver model support. */
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kobject.h>
#include <linux/atmdev.h>
#include <linux/rtnetlink.h>
#include <linux/ip.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/seq_file.h>
#include <linux/rcupdate.h>
#include <linux/jhash.h>
+#include <linux/slab.h>
#include <net/route.h> /* for struct rtable and routing */
#include <net/icmp.h> /* icmp_send */
#include <linux/param.h> /* for HZ */
#include <linux/skbuff.h>
#include <linux/bitops.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/sock.h> /* struct sock */
#include <linux/uaccess.h>
#include <linux/poll.h>
#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/capability.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/atmmpc.h>
+#include <linux/slab.h>
#include <linux/time.h>
#include "mpoa_caches.h"
#include <linux/uaccess.h>
#include <linux/atmmpc.h>
#include <linux/atm.h>
+#include <linux/gfp.h>
#include "mpc.h"
#include "mpoa_caches.h"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/atm.h>
#include <linux/atmdev.h>
#include <linux/capability.h>
#include <linux/netdevice.h>
#include <linux/atmclip.h>
#include <linux/init.h> /* for __init */
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/atmclip.h>
#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include "common.h"
#include "protocols.h"
#include <linux/capability.h>
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/sock.h> /* for struct sock */
#include <linux/atmsvc.h>
#include <linux/atmdev.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include "resources.h"
#include "signaling.h"
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/sockios.h>
#include <linux/spinlock.h>
#include <linux/net.h>
+#include <linux/gfp.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/sockios.h>
#include <linux/spinlock.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
* Copyright (C) 1996 Mike Shaver (shaver@zeroknowledge.com)
*/
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/spinlock.h>
#include <net/ax25.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/poll.h>
#include <linux/freezer.h>
#include <linux/errno.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/socket.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/netdevice.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/skbuff.h>
#include <linux/file.h>
#include <linux/init.h>
#include <linux/compat.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <asm/system.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/skbuff.h>
#include <linux/ioctl.h>
#include <linux/file.h>
#include <linux/compat.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <linux/isdn/capilli.h>
/* Bluetooth HCI driver model support. */
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
-struct class *bt_class = NULL;
-EXPORT_SYMBOL_GPL(bt_class);
+static struct class *bt_class;
struct dentry *bt_debugfs = NULL;
EXPORT_SYMBOL_GPL(bt_debugfs);
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
#include <linux/skbuff.h>
#include <linux/file.h>
#include <linux/init.h>
#include <linux/compat.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include "hidp.h"
#include <linux/skbuff.h>
#include <linux/list.h>
#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/uaccess.h>
#include <linux/crc16.h>
#include <net/sock.h>
BT_DBG("sk %p", sk);
- if (!addr || addr->sa_family != AF_BLUETOOTH)
+ if (!addr || alen < sizeof(addr->sa_family) ||
+ addr->sa_family != AF_BLUETOOTH)
return -EINVAL;
memset(&la, 0, sizeof(la));
/* Connectionless channel */
if (sk->sk_type == SOCK_DGRAM) {
skb = l2cap_create_connless_pdu(sk, msg, len);
- err = l2cap_do_send(sk, skb);
+ if (IS_ERR(skb))
+ err = PTR_ERR(skb);
+ else
+ err = l2cap_do_send(sk, skb);
goto done;
}
int len = cmd->len - sizeof(*rsp);
char req[64];
+ if (len > sizeof(req) - sizeof(struct l2cap_conf_req)) {
+ l2cap_send_disconn_req(conn, sk);
+ goto done;
+ }
+
/* throw out any old stored conf requests */
result = L2CAP_CONF_SUCCESS;
len = l2cap_parse_conf_rsp(sk, rsp->data,
return 0;
}
-static ssize_t l2cap_sysfs_show(struct class *dev,
- struct class_attribute *attr,
- char *buf)
+static int l2cap_debugfs_show(struct seq_file *f, void *p)
{
struct sock *sk;
struct hlist_node *node;
- char *str = buf;
read_lock_bh(&l2cap_sk_list.lock);
sk_for_each(sk, node, &l2cap_sk_list.head) {
struct l2cap_pinfo *pi = l2cap_pi(sk);
- str += sprintf(str, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d %d\n",
- batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
- sk->sk_state, __le16_to_cpu(pi->psm), pi->scid,
- pi->dcid, pi->imtu, pi->omtu, pi->sec_level);
+ seq_printf(f, "%s %s %d %d 0x%4.4x 0x%4.4x %d %d %d\n",
+ batostr(&bt_sk(sk)->src),
+ batostr(&bt_sk(sk)->dst),
+ sk->sk_state, __le16_to_cpu(pi->psm),
+ pi->scid, pi->dcid,
+ pi->imtu, pi->omtu, pi->sec_level);
}
read_unlock_bh(&l2cap_sk_list.lock);
- return str - buf;
+ return 0;
}
-static CLASS_ATTR(l2cap, S_IRUGO, l2cap_sysfs_show, NULL);
+static int l2cap_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, l2cap_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations l2cap_debugfs_fops = {
+ .open = l2cap_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *l2cap_debugfs;
static const struct proto_ops l2cap_sock_ops = {
.family = PF_BLUETOOTH,
goto error;
}
- if (class_create_file(bt_class, &class_attr_l2cap) < 0)
- BT_ERR("Failed to create L2CAP info file");
+ if (bt_debugfs) {
+ l2cap_debugfs = debugfs_create_file("l2cap", 0444,
+ bt_debugfs, NULL, &l2cap_debugfs_fops);
+ if (!l2cap_debugfs)
+ BT_ERR("Failed to create L2CAP debug file");
+ }
BT_INFO("L2CAP ver %s", VERSION);
BT_INFO("L2CAP socket layer initialized");
static void __exit l2cap_exit(void)
{
- class_remove_file(bt_class, &class_attr_l2cap);
+ debugfs_remove(l2cap_debugfs);
if (bt_sock_unregister(BTPROTO_L2CAP) < 0)
BT_ERR("L2CAP socket unregistration failed");
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/net.h>
#include <linux/mutex.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/uaccess.h>
.security_cfm = rfcomm_security_cfm
};
-static ssize_t rfcomm_dlc_sysfs_show(struct class *dev,
- struct class_attribute *attr,
- char *buf)
+static int rfcomm_dlc_debugfs_show(struct seq_file *f, void *x)
{
struct rfcomm_session *s;
struct list_head *pp, *p;
- char *str = buf;
rfcomm_lock();
struct sock *sk = s->sock->sk;
struct rfcomm_dlc *d = list_entry(pp, struct rfcomm_dlc, list);
- str += sprintf(str, "%s %s %ld %d %d %d %d\n",
- batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
- d->state, d->dlci, d->mtu, d->rx_credits, d->tx_credits);
+ seq_printf(f, "%s %s %ld %d %d %d %d\n",
+ batostr(&bt_sk(sk)->src),
+ batostr(&bt_sk(sk)->dst),
+ d->state, d->dlci, d->mtu,
+ d->rx_credits, d->tx_credits);
}
}
rfcomm_unlock();
- return (str - buf);
+ return 0;
}
-static CLASS_ATTR(rfcomm_dlc, S_IRUGO, rfcomm_dlc_sysfs_show, NULL);
+static int rfcomm_dlc_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, rfcomm_dlc_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations rfcomm_dlc_debugfs_fops = {
+ .open = rfcomm_dlc_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *rfcomm_dlc_debugfs;
/* ---- Initialization ---- */
static int __init rfcomm_init(void)
goto unregister;
}
- if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
- BT_ERR("Failed to create RFCOMM info file");
+ if (bt_debugfs) {
+ rfcomm_dlc_debugfs = debugfs_create_file("rfcomm_dlc", 0444,
+ bt_debugfs, NULL, &rfcomm_dlc_debugfs_fops);
+ if (!rfcomm_dlc_debugfs)
+ BT_ERR("Failed to create RFCOMM debug file");
+ }
err = rfcomm_init_ttys();
if (err < 0)
static void __exit rfcomm_exit(void)
{
- class_remove_file(bt_class, &class_attr_rfcomm_dlc);
+ debugfs_remove(rfcomm_dlc_debugfs);
hci_unregister_cb(&rfcomm_cb);
#include <linux/skbuff.h>
#include <linux/list.h>
#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <net/sock.h>
#include <asm/system.h>
BT_DBG("sk %p", sk);
- if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct sockaddr_rc))
+ if (alen < sizeof(struct sockaddr_rc) ||
+ addr->sa_family != AF_BLUETOOTH)
return -EINVAL;
lock_sock(sk);
return result;
}
-static ssize_t rfcomm_sock_sysfs_show(struct class *dev,
- struct class_attribute *attr,
- char *buf)
+static int rfcomm_sock_debugfs_show(struct seq_file *f, void *p)
{
struct sock *sk;
struct hlist_node *node;
- char *str = buf;
read_lock_bh(&rfcomm_sk_list.lock);
sk_for_each(sk, node, &rfcomm_sk_list.head) {
- str += sprintf(str, "%s %s %d %d\n",
- batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
+ seq_printf(f, "%s %s %d %d\n",
+ batostr(&bt_sk(sk)->src),
+ batostr(&bt_sk(sk)->dst),
sk->sk_state, rfcomm_pi(sk)->channel);
}
read_unlock_bh(&rfcomm_sk_list.lock);
- return (str - buf);
+ return 0;
}
-static CLASS_ATTR(rfcomm, S_IRUGO, rfcomm_sock_sysfs_show, NULL);
+static int rfcomm_sock_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, rfcomm_sock_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations rfcomm_sock_debugfs_fops = {
+ .open = rfcomm_sock_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *rfcomm_sock_debugfs;
static const struct proto_ops rfcomm_sock_ops = {
.family = PF_BLUETOOTH,
if (err < 0)
goto error;
- if (class_create_file(bt_class, &class_attr_rfcomm) < 0)
- BT_ERR("Failed to create RFCOMM info file");
+ if (bt_debugfs) {
+ rfcomm_sock_debugfs = debugfs_create_file("rfcomm", 0444,
+ bt_debugfs, NULL, &rfcomm_sock_debugfs_fops);
+ if (!rfcomm_sock_debugfs)
+ BT_ERR("Failed to create RFCOMM debug file");
+ }
BT_INFO("RFCOMM socket layer initialized");
void rfcomm_cleanup_sockets(void)
{
- class_remove_file(bt_class, &class_attr_rfcomm);
+ debugfs_remove(rfcomm_sock_debugfs);
if (bt_sock_unregister(BTPROTO_RFCOMM) < 0)
BT_ERR("RFCOMM socket layer unregistration failed");
#include <linux/socket.h>
#include <linux/skbuff.h>
#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/list.h>
#include <net/sock.h>
BT_DBG("sk %p", sk);
- if (addr->sa_family != AF_BLUETOOTH || alen < sizeof(struct sockaddr_sco))
+ if (alen < sizeof(struct sockaddr_sco) ||
+ addr->sa_family != AF_BLUETOOTH)
return -EINVAL;
if (sk->sk_state != BT_OPEN && sk->sk_state != BT_BOUND)
return 0;
}
-static ssize_t sco_sysfs_show(struct class *dev,
- struct class_attribute *attr,
- char *buf)
+static int sco_debugfs_show(struct seq_file *f, void *p)
{
struct sock *sk;
struct hlist_node *node;
- char *str = buf;
read_lock_bh(&sco_sk_list.lock);
sk_for_each(sk, node, &sco_sk_list.head) {
- str += sprintf(str, "%s %s %d\n",
- batostr(&bt_sk(sk)->src), batostr(&bt_sk(sk)->dst),
- sk->sk_state);
+ seq_printf(f, "%s %s %d\n", batostr(&bt_sk(sk)->src),
+ batostr(&bt_sk(sk)->dst), sk->sk_state);
}
read_unlock_bh(&sco_sk_list.lock);
- return (str - buf);
+ return 0;
}
-static CLASS_ATTR(sco, S_IRUGO, sco_sysfs_show, NULL);
+static int sco_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, sco_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations sco_debugfs_fops = {
+ .open = sco_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *sco_debugfs;
static const struct proto_ops sco_sock_ops = {
.family = PF_BLUETOOTH,
goto error;
}
- if (class_create_file(bt_class, &class_attr_sco) < 0)
- BT_ERR("Failed to create SCO info file");
+ if (bt_debugfs) {
+ sco_debugfs = debugfs_create_file("sco", 0444,
+ bt_debugfs, NULL, &sco_debugfs_fops);
+ if (!sco_debugfs)
+ BT_ERR("Failed to create SCO debug file");
+ }
BT_INFO("SCO (Voice Link) ver %s", VERSION);
BT_INFO("SCO socket layer initialized");
static void __exit sco_exit(void)
{
- class_remove_file(bt_class, &class_attr_sco);
+ debugfs_remove(sco_debugfs);
if (bt_sock_unregister(BTPROTO_SCO) < 0)
BT_ERR("SCO socket unregistration failed");
#include <linux/etherdevice.h>
#include <linux/jhash.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <asm/atomic.h>
#include <asm/unaligned.h>
#include "br_private.h"
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/if_ether.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include "br_private.h"
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/if_bridge.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <linux/times.h>
#include <net/net_namespace.h>
#include <asm/uaccess.h>
if (!pskb_may_pull(skb, len))
return -EINVAL;
- grec = (void *)(skb->data + len);
+ grec = (void *)(skb->data + len - sizeof(*grec));
group = grec->grec_mca;
type = grec->grec_type;
- len += grec->grec_nsrcs * 4;
+ len += ntohs(grec->grec_nsrcs) * 4;
if (!pskb_may_pull(skb, len))
return -EINVAL;
unsigned offset;
int err;
- BR_INPUT_SKB_CB(skb)->igmp = 0;
- BR_INPUT_SKB_CB(skb)->mrouters_only = 0;
-
/* We treat OOM as packet loss for now. */
if (!pskb_may_pull(skb, sizeof(*iph)))
return -EINVAL;
int br_multicast_rcv(struct net_bridge *br, struct net_bridge_port *port,
struct sk_buff *skb)
{
+ BR_INPUT_SKB_CB(skb)->igmp = 0;
+ BR_INPUT_SKB_CB(skb)->mrouters_only = 0;
+
if (br->multicast_disabled)
return 0;
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <net/rtnetlink.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <linux/netfilter_bridge.h>
#include <linux/etherdevice.h>
#include <linux/llc.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/socket.h>
#include <linux/skbuff.h>
#include <linux/netfilter_bridge/ebtables.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/can.h>
#include <linux/can/core.h>
#include <linux/can/bcm.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/net_namespace.h>
struct sock *sk = sock->sk;
struct bcm_sock *bo = bcm_sk(sk);
+ if (len < sizeof(*addr))
+ return -EINVAL;
+
if (bo->bound)
return -EISCONN;
#include <linux/init.h>
#include <linux/uio.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/socket.h>
#include <linux/if_arp.h>
return -EFAULT;
}
} else if (count == 1) {
- if (copy_from_user(&sfilter, optval, optlen))
+ if (copy_from_user(&sfilter, optval, sizeof(sfilter)))
return -EFAULT;
}
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/fs.h>
#include <linux/types.h>
#include <linux/file.h>
#include <linux/poll.h>
#include <linux/highmem.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <net/protocol.h>
#include <linux/skbuff.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/hash.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/mutex.h>
#include <linux/string.h>
if (dev->real_num_tx_queues > 1)
queue_index = skb_tx_hash(dev, skb);
- if (sk && sk->sk_dst_cache)
- sk_tx_queue_set(sk, queue_index);
+ if (sk) {
+ struct dst_entry *dst = rcu_dereference_bh(sk->sk_dst_cache);
+
+ if (dst && skb_dst(skb) == dst)
+ sk_tx_queue_set(sk, queue_index);
+ }
}
}
{
struct packet_type *ptype, *pt_prev;
struct net_device *orig_dev;
+ struct net_device *master;
struct net_device *null_or_orig;
struct net_device *null_or_bond;
int ret = NET_RX_DROP;
null_or_orig = NULL;
orig_dev = skb->dev;
- if (orig_dev->master) {
- if (skb_bond_should_drop(skb))
+ master = ACCESS_ONCE(orig_dev->master);
+ if (master) {
+ if (skb_bond_should_drop(skb, master))
null_or_orig = orig_dev; /* deliver only exact match */
else
- skb->dev = orig_dev->master;
+ skb->dev = master;
}
__get_cpu_var(netdev_rx_stat).total++;
#include <linux/percpu.h>
#include <linux/timer.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <net/genetlink.h>
#include <net/netevent.h>
#include <linux/workqueue.h>
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/string.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
/*
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/if_packet.h>
+#include <linux/gfp.h>
#include <net/ip.h>
#include <net/protocol.h>
#include <net/netlink.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
#include <linux/rbtree.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/gen_stats.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/net.h>
#include <linux/in6.h>
#include <asm/uaccess.h>
#include <linux/rtnetlink.h>
#include <linux/jiffies.h>
#include <linux/spinlock.h>
-#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/bitops.h>
#include <asm/types.h>
* Harald Welte Add neighbour cache statistics like rtstat
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/rtnetlink.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
#include <linux/netlink.h>
#include <linux/net_dropmon.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <asm/bitops.h>
#include <linux/delay.h>
#include <linux/rcupdate.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <net/tcp.h>
#include <net/udp.h>
#include <asm/unaligned.h>
np->name, np->local_port);
printk(KERN_INFO "%s: local IP %pI4\n",
np->name, &np->local_ip);
- printk(KERN_INFO "%s: interface %s\n",
+ printk(KERN_INFO "%s: interface '%s'\n",
np->name, np->dev_name);
printk(KERN_INFO "%s: remote port %d\n",
np->name, np->remote_port);
if ((delim = strchr(cur, '@')) == NULL)
goto parse_failed;
*delim = 0;
+ if (*cur == ' ' || *cur == '\t')
+ printk(KERN_INFO "%s: warning: whitespace"
+ "is not allowed\n", np->name);
np->remote_port = simple_strtol(cur, NULL, 10);
cur = delim;
}
return 0;
parse_failed:
- printk(KERN_INFO "%s: couldn't parse config at %s!\n",
+ printk(KERN_INFO "%s: couldn't parse config at '%s'!\n",
np->name, cur);
return -1;
}
err = ops->newlink(net, dev, tb, data);
else
err = register_netdevice(dev);
- if (err < 0 && !IS_ERR(dev)) {
+
+ if (err < 0 && !IS_ERR(dev))
free_netdev(dev);
+ if (err < 0)
goto out;
- }
err = rtnl_configure_link(dev, ifm);
if (err < 0)
#include <linux/security.h>
#include <linux/pid.h>
#include <linux/nsproxy.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/netdevice.h>
#include <linux/ratelimit.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/sock.h>
#include <linux/netdevice.h>
#include <linux/netlink.h>
+#include <linux/slab.h>
#include <net/netlink.h>
#include <net/rtnetlink.h>
#include <linux/dcbnl.h>
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
+
#include "ccid.h"
#include "ccids/lib/tfrc.h"
/*
* This implementation should follow RFC 4341
*/
+#include <linux/slab.h>
#include "../feat.h"
#include "../ccid.h"
#include "../dccp.h"
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include "ccid.h"
#include "feat.h"
#include <linux/dccp.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/dccp.h>
#include <linux/icmp.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/random.h>
#include <linux/module.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/xfrm.h>
#include <net/addrconf.h>
*/
#include <linux/dccp.h>
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/timer.h>
#include <linux/dccp.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/inet_sock.h>
#include <net/sock.h>
#include <linux/module.h>
#include <linux/kfifo.h>
#include <linux/vmalloc.h>
+#include <linux/gfp.h>
#include <net/net_namespace.h>
#include "dccp.h"
#include <linux/if_arp.h>
#include <linux/init.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/inet_sock.h>
#include <linux/skbuff.h>
#include <linux/sysctl.h>
#include <linux/notifier.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <net/net_namespace.h>
#include <linux/string.h>
#include <linux/net.h>
#include <linux/socket.h>
+#include <linux/slab.h>
#include <linux/sockios.h>
#include <linux/init.h>
#include <linux/skbuff.h>
#include <linux/module.h>
#include <linux/socket.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <linux/if_ether.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/netdevice.h>
#include <linux/inet.h>
#include <linux/route.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <asm/system.h>
#include <linux/netdevice.h>
#include <linux/inet.h>
#include <linux/route.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/system.h>
#include <linux/fcntl.h>
#include <linux/inet.h>
#include <linux/route.h>
#include <linux/in_route.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/net.h>
#include <linux/socket.h>
+#include <linux/slab.h>
#include <linux/sockios.h>
#include <linux/init.h>
#include <linux/skbuff.h>
*/
#include <linux/module.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/netfilter.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <net/dsa.h>
#include "dsa_priv.h"
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include "dsa_priv.h"
#define DSA_HLEN 4
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include "dsa_priv.h"
#define DSA_HLEN 4
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include "dsa_priv.h"
netdev_tx_t trailer_xmit(struct sk_buff *skb, struct net_device *dev)
#include <linux/wireless.h>
#include <linux/skbuff.h>
#include <linux/udp.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/inet_common.h>
#include <linux/stat.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/datalink.h>
#include <linux/if.h>
#include <linux/termios.h> /* For TIOCOUTQ/INQ */
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/datalink.h>
#include <net/psnap.h>
#include <net/sock.h>
{
struct sock *sk = sock->sk;
+ if (addr_len < sizeof(uaddr->sa_family))
+ return -EINVAL;
+
if (uaddr->sa_family == AF_UNSPEC)
return sk->sk_prot->disconnect(sk, flags);
dev_load(sock_net(sk), ifr.ifr_name);
dev = dev_get_by_name(sock_net(sk), ifr.ifr_name);
+ if (!dev)
+ return -ENODEV;
+
if (dev->type == ARPHRD_IEEE802154 && dev->netdev_ops->ndo_do_ioctl)
ret = dev->netdev_ops->ndo_do_ioctl(dev, &ifr, cmd);
#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_ieee802154.h>
#include <net/ieee802154.h>
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <net/genetlink.h>
#include <linux/nl802154.h>
* Maxim Osipov <maxim.osipov@siemens.com>
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include <net/wpan-phy.h>
#include <linux/module.h>
#include <linux/if_arp.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_ieee802154.h>
*
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/poll.h>
#include <linux/netfilter_ipv4.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
{
struct sock *sk = sock->sk;
+ if (addr_len < sizeof(uaddr->sa_family))
+ return -EINVAL;
if (uaddr->sa_family == AF_UNSPEC)
return sk->sk_prot->disconnect(sk, flags);
int err;
long timeo;
+ if (addr_len < sizeof(uaddr->sa_family))
+ return -EINVAL;
+
lock_sock(sk);
if (uaddr->sa_family == AF_UNSPEC) {
#include <crypto/hash.h>
#include <linux/err.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/xfrm.h>
#include <net/ah.h>
#include <linux/net.h>
#include <linux/rcupdate.h>
#include <linux/jhash.h>
+#include <linux/slab.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
#include <linux/string.h>
#include <linux/jhash.h>
#include <linux/audit.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/icmp.h>
#include <net/tcp.h>
#include <linux/notifier.h>
#include <linux/inetdevice.h>
#include <linux/igmp.h>
+#include <linux/slab.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
if (idx < s_idx)
goto cont;
- if (idx > s_idx)
+ if (h > s_h || idx > s_idx)
s_ip_idx = 0;
in_dev = __in_dev_get_rcu(dev);
if (!in_dev)
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/protocol.h>
#include <linux/skbuff.h>
#include <linux/netlink.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <linux/proc_fs.h>
#include <linux/skbuff.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/arp.h>
#include <net/ip.h>
#include <linux/netlink.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/protocol.h>
{
struct node *ret = tnode_get_child(tn, i);
- return rcu_dereference(ret);
+ return rcu_dereference_check(ret,
+ rcu_read_lock_held() ||
+ lockdep_rtnl_is_held());
}
static inline int tnode_child_length(const struct tnode *tn)
struct node *n;
pos = 0;
- n = rcu_dereference(t->trie);
+ n = rcu_dereference_check(t->trie,
+ rcu_read_lock_held() ||
+ lockdep_rtnl_is_held());
while (n != NULL && NODE_TYPE(n) == T_TNODE) {
tn = (struct tnode *) n;
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/netfilter_ipv4.h>
+#include <linux/slab.h>
#include <net/snmp.h>
#include <net/ip.h>
#include <net/route.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/types.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/random.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <net/inet_frag.h>
#include <linux/kernel.h>
#include <linux/kmemcheck.h>
+#include <linux/slab.h>
#include <net/inet_hashtables.h>
#include <net/inet_timewait_sock.h>
#include <net/ip.h>
#include <linux/ip.h>
#include <linux/icmp.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/ip.h>
#include <net/tcp.h>
#include <linux/netdevice.h>
#include <linux/jhash.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <net/route.h>
#include <net/dst.h>
#include <net/sock.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
tunnel->err_count = 0;
}
- max_headroom = LL_RESERVED_SPACE(tdev) + gre_hlen;
+ max_headroom = LL_RESERVED_SPACE(tdev) + gre_hlen + rt->u.dst.header_len;
if (skb_headroom(skb) < max_headroom || skb_shared(skb)||
(skb_cloned(skb) && !skb_clone_writable(skb, 0))) {
struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
+ if (max_headroom > dev->needed_headroom)
+ dev->needed_headroom = max_headroom;
if (!new_skb) {
ip_rt_put(rt);
txq->tx_dropped++;
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/net.h>
#include <linux/socket.h>
#include <linux/capability.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <asm/uaccess.h>
#include <linux/skbuff.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/sockios.h>
newskb->pkt_type = PACKET_LOOPBACK;
newskb->ip_summed = CHECKSUM_UNNECESSARY;
WARN_ON(!skb_dst(newskb));
- netif_rx(newskb);
+ netif_rx_ni(newskb);
return 0;
}
#include <linux/icmp.h>
#include <linux/inetdevice.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/ip.h>
#include <net/icmp.h>
#include <linux/root_dev.h>
#include <linux/delay.h>
#include <linux/nfs_fs.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/arp.h>
#include <net/ip.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/mroute.h>
#include <linux/init.h>
#include <linux/if_ether.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/protocol.h>
int line;
struct mfc_cache *uc, *c, **cp;
+ if (mfc->mfcc_parent >= MAXVIFS)
+ return -ENFILE;
+
line = MFC_HASH(mfc->mfcc_mcastgrp.s_addr, mfc->mfcc_origin.s_addr);
for (cp = &net->ipv4.mfc_cache_array[line];
int ct;
struct rtnexthop *nhp;
struct net *net = mfc_net(c);
- struct net_device *dev = net->ipv4.vif_table[c->mfc_parent].dev;
u8 *b = skb_tail_pointer(skb);
struct rtattr *mp_head;
- if (dev)
- RTA_PUT(skb, RTA_IIF, 4, &dev->ifindex);
+ /* If cache is unresolved, don't try to parse IIF and OIF */
+ if (c->mfc_parent > MAXVIFS)
+ return -ENOENT;
+
+ if (VIF_EXISTS(net, c->mfc_parent))
+ RTA_PUT(skb, RTA_IIF, 4, &net->ipv4.vif_table[c->mfc_parent].dev->ifindex);
mp_head = (struct rtattr *)skb_put(skb, RTA_LENGTH(0));
for (ct = c->mfc_un.res.minvif; ct < c->mfc_un.res.maxvif; ct++) {
- if (c->mfc_un.res.ttls[ct] < 255) {
+ if (VIF_EXISTS(net, ct) && c->mfc_un.res.ttls[ct] < 255) {
if (skb_tailroom(skb) < RTA_ALIGN(RTA_ALIGN(sizeof(*nhp)) + 4))
goto rtattr_failure;
nhp = (struct rtnexthop *)skb_put(skb, RTA_ALIGN(sizeof(*nhp)));
#include <linux/netfilter_ipv4.h>
#include <linux/ip.h>
#include <linux/skbuff.h>
+#include <linux/gfp.h>
#include <net/route.h>
#include <net/xfrm.h>
#include <net/ip.h>
#include <linux/module.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter_arp/arp_tables.h>
+#include <linux/slab.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
#include <linux/security.h>
#include <linux/net.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/route.h>
#include <linux/jhash.h>
#include <linux/bitops.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/module.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/udp.h>
#include <linux/icmp.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/socket.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/slab.h>
#include <net/ip.h>
MODULE_LICENSE("GPL");
#include <linux/netfilter_ipv4/ip_tables.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/route.h>
#include <linux/ip.h>
*/
#include <linux/module.h>
#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/slab.h>
#include <net/ip.h>
#define RAW_VALID_HOOKS ((1 << NF_INET_PRE_ROUTING) | (1 << NF_INET_LOCAL_OUT))
*/
#include <linux/module.h>
#include <linux/netfilter_ipv4/ip_tables.h>
+#include <linux/slab.h>
#include <net/ip.h>
MODULE_LICENSE("GPL");
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
+#include <linux/gfp.h>
#include <net/checksum.h>
#include <net/icmp.h>
#include <net/ip.h>
* published by the Free Software Foundation.
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/kmod.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/kmod.h>
#include <linux/skbuff.h>
#include <linux/proc_fs.h>
+#include <linux/slab.h>
#include <net/checksum.h>
#include <net/route.h>
#include <linux/bitops.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/udp.h>
*/
#include <linux/types.h>
#include <linux/icmp.h>
+#include <linux/gfp.h>
#include <linux/ip.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <net/net_namespace.h>
#include <net/dst.h>
#include <net/sock.h>
-#include <linux/gfp.h>
#include <linux/ip.h>
#include <linux/net.h>
#include <net/ip.h>
#include <linux/jhash.h>
#include <linux/rcupdate.h>
#include <linux/times.h>
+#include <linux/slab.h>
#include <net/dst.h>
#include <net/net_namespace.h>
#include <net/protocol.h>
}
static int rt_intern_hash(unsigned hash, struct rtable *rt,
- struct rtable **rp, struct sk_buff *skb)
+ struct rtable **rp, struct sk_buff *skb, int ifindex)
{
struct rtable *rth, **rthp;
unsigned long now;
slow_chain_length(rt_hash_table[hash].chain) > rt_chain_length_max) {
struct net *net = dev_net(rt->u.dst.dev);
int num = ++net->ipv4.current_rt_cache_rebuild_count;
- if (!rt_caching(dev_net(rt->u.dst.dev))) {
+ if (!rt_caching(net)) {
printk(KERN_WARNING "%s: %d rebuilds is over limit, route caching disabled\n",
rt->u.dst.dev->name, num);
}
- rt_emergency_hash_rebuild(dev_net(rt->u.dst.dev));
+ rt_emergency_hash_rebuild(net);
+ spin_unlock_bh(rt_hash_lock_addr(hash));
+
+ hash = rt_hash(rt->fl.fl4_dst, rt->fl.fl4_src,
+ ifindex, rt_genid(net));
+ goto restart;
}
}
dev_hold(rt->u.dst.dev);
if (rt->idev)
in_dev_hold(rt->idev);
- rt->u.dst.obsolete = 0;
+ rt->u.dst.obsolete = -1;
rt->u.dst.lastuse = jiffies;
rt->u.dst.path = &rt->u.dst;
rt->u.dst.neighbour = NULL;
&netevent);
rt_del(hash, rth);
- if (!rt_intern_hash(hash, rt, &rt, NULL))
+ if (!rt_intern_hash(hash, rt, &rt, NULL, rt->fl.oif))
ip_rt_put(rt);
goto do_next;
}
struct dst_entry *ret = dst;
if (rt) {
- if (dst->obsolete) {
+ if (dst->obsolete > 0) {
ip_rt_put(rt);
ret = NULL;
} else if ((rt->rt_flags & RTCF_REDIRECTED) ||
- rt->u.dst.expires) {
+ (rt->u.dst.expires &&
+ time_after_eq(jiffies, rt->u.dst.expires))) {
unsigned hash = rt_hash(rt->fl.fl4_dst, rt->fl.fl4_src,
rt->fl.oif,
rt_genid(dev_net(dst->dev)));
static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie)
{
- return NULL;
+ if (rt_is_expired((struct rtable *)dst))
+ return NULL;
+ return dst;
}
static void ipv4_dst_destroy(struct dst_entry *dst)
if (!rth)
goto e_nobufs;
- rth->u.dst.output= ip_rt_bug;
+ rth->u.dst.output = ip_rt_bug;
+ rth->u.dst.obsolete = -1;
atomic_set(&rth->u.dst.__refcnt, 1);
rth->u.dst.flags= DST_HOST;
in_dev_put(in_dev);
hash = rt_hash(daddr, saddr, dev->ifindex, rt_genid(dev_net(dev)));
- return rt_intern_hash(hash, rth, NULL, skb);
+ return rt_intern_hash(hash, rth, NULL, skb, dev->ifindex);
e_nobufs:
in_dev_put(in_dev);
rth->fl.oif = 0;
rth->rt_spec_dst= spec_dst;
+ rth->u.dst.obsolete = -1;
rth->u.dst.input = ip_forward;
rth->u.dst.output = ip_output;
rth->rt_genid = rt_genid(dev_net(rth->u.dst.dev));
/* put it into the cache */
hash = rt_hash(daddr, saddr, fl->iif,
rt_genid(dev_net(rth->u.dst.dev)));
- return rt_intern_hash(hash, rth, NULL, skb);
+ return rt_intern_hash(hash, rth, NULL, skb, fl->iif);
}
/*
goto e_nobufs;
rth->u.dst.output= ip_rt_bug;
+ rth->u.dst.obsolete = -1;
rth->rt_genid = rt_genid(net);
atomic_set(&rth->u.dst.__refcnt, 1);
}
rth->rt_type = res.type;
hash = rt_hash(daddr, saddr, fl.iif, rt_genid(net));
- err = rt_intern_hash(hash, rth, NULL, skb);
+ err = rt_intern_hash(hash, rth, NULL, skb, fl.iif);
goto done;
no_route:
rth->rt_spec_dst= fl->fl4_src;
rth->u.dst.output=ip_output;
+ rth->u.dst.obsolete = -1;
rth->rt_genid = rt_genid(dev_net(dev_out));
RT_CACHE_STAT_INC(out_slow_tot);
if (err == 0) {
hash = rt_hash(oldflp->fl4_dst, oldflp->fl4_src, oldflp->oif,
rt_genid(dev_net(dev_out)));
- err = rt_intern_hash(hash, rth, rp, NULL);
+ err = rt_intern_hash(hash, rth, rp, NULL, oldflp->oif);
}
return err;
#include <linux/inetdevice.h>
#include <linux/seqlock.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/snmp.h>
#include <net/icmp.h>
#include <net/ip.h>
#include <linux/err.h>
#include <linux/crypto.h>
#include <linux/time.h>
+#include <linux/slab.h>
#include <net/icmp.h>
#include <net/tcp.h>
if (tp->urg_seq == tp->copied_seq &&
!sock_flag(sk, SOCK_URGINLINE) &&
tp->urg_data)
- target--;
+ target++;
/* Potential race condition. If read of tp below will
* escape above sk->sk_state, we can be illegally awaken
tp->ucopy.memory = 0;
}
+#ifdef CONFIG_NET_DMA
+static void tcp_service_net_dma(struct sock *sk, bool wait)
+{
+ dma_cookie_t done, used;
+ dma_cookie_t last_issued;
+ struct tcp_sock *tp = tcp_sk(sk);
+
+ if (!tp->ucopy.dma_chan)
+ return;
+
+ last_issued = tp->ucopy.dma_cookie;
+ dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+
+ do {
+ if (dma_async_memcpy_complete(tp->ucopy.dma_chan,
+ last_issued, &done,
+ &used) == DMA_SUCCESS) {
+ /* Safe to free early-copied skbs now */
+ __skb_queue_purge(&sk->sk_async_wait_queue);
+ break;
+ } else {
+ struct sk_buff *skb;
+ while ((skb = skb_peek(&sk->sk_async_wait_queue)) &&
+ (dma_async_is_complete(skb->dma_cookie, done,
+ used) == DMA_SUCCESS)) {
+ __skb_dequeue(&sk->sk_async_wait_queue);
+ kfree_skb(skb);
+ }
+ }
+ } while (wait);
+}
+#endif
+
static inline struct sk_buff *tcp_recv_skb(struct sock *sk, u32 seq, u32 *off)
{
struct sk_buff *skb;
sk_eat_skb(sk, skb, 0);
if (!desc->count)
break;
+ tp->copied_seq = seq;
}
tp->copied_seq = seq;
/* __ Set realtime policy in scheduler __ */
}
+#ifdef CONFIG_NET_DMA
+ if (tp->ucopy.dma_chan)
+ dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+#endif
if (copied >= target) {
/* Do not sleep, just process backlog. */
release_sock(sk);
sk_wait_data(sk, &timeo);
#ifdef CONFIG_NET_DMA
+ tcp_service_net_dma(sk, false); /* Don't block */
tp->ucopy.wakeup = 0;
#endif
copied = -EFAULT;
break;
}
+
+ dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
+
if ((offset + used) == skb->len)
copied_early = 1;
}
#ifdef CONFIG_NET_DMA
- if (tp->ucopy.dma_chan) {
- dma_cookie_t done, used;
-
- dma_async_memcpy_issue_pending(tp->ucopy.dma_chan);
-
- while (dma_async_memcpy_complete(tp->ucopy.dma_chan,
- tp->ucopy.dma_cookie, &done,
- &used) == DMA_IN_PROGRESS) {
- /* do partial cleanup of sk_async_wait_queue */
- while ((skb = skb_peek(&sk->sk_async_wait_queue)) &&
- (dma_async_is_complete(skb->dma_cookie, done,
- used) == DMA_SUCCESS)) {
- __skb_dequeue(&sk->sk_async_wait_queue);
- kfree_skb(skb);
- }
- }
+ tcp_service_net_dma(sk, true); /* Wait for queue to drain */
+ tp->ucopy.dma_chan = NULL;
- /* Safe to free early-copied skbs now */
- __skb_queue_purge(&sk->sk_async_wait_queue);
- tp->ucopy.dma_chan = NULL;
- }
if (tp->ucopy.pinned_list) {
dma_unpin_iovec_pages(tp->ucopy.pinned_list);
tp->ucopy.pinned_list = NULL;
#include <linux/mm.h>
#include <linux/types.h>
#include <linux/list.h>
+#include <linux/gfp.h>
#include <net/tcp.h>
int sysctl_tcp_max_ssthresh = 0;
*/
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/sysctl.h>
#include <linux/kernel.h>
int err;
unsigned int mss;
+ if (packets == 0)
+ return;
+
WARN_ON(packets > tp->packets_out);
if (tp->lost_skb_hint) {
skb = tp->lost_skb_hint;
#include <linux/jhash.h>
#include <linux/init.h>
#include <linux/times.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/icmp.h>
if (sk->sk_state == TCP_CLOSE)
goto out;
+ if (unlikely(iph->ttl < inet_sk(sk)->min_ttl)) {
+ NET_INC_STATS_BH(net, LINUX_MIB_TCPMINTTLDROP);
+ goto out;
+ }
+
icsk = inet_csk(sk);
tp = tcp_sk(sk);
seq = ntohl(th->seq);
#include <linux/mm.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/sysctl.h>
#include <linux/workqueue.h>
#include <net/tcp.h>
#include <net/tcp.h>
#include <linux/compiler.h>
+#include <linux/gfp.h>
#include <linux/module.h>
/* People can turn this off for buggy TCP's found in printers etc. */
#include <linux/kprobes.h>
#include <linux/socket.h>
#include <linux/tcp.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
#include <linux/ktime.h>
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <net/tcp.h>
int sysctl_tcp_syn_retries __read_mostly = TCP_SYN_RETRIES;
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/icmp.h>
#include <net/ip.h>
#include <net/protocol.h>
#include <linux/mm.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/tcp_states.h>
#include <linux/skbuff.h>
#include <linux/proc_fs.h>
if (hslot->count < hslot2->count)
goto begin;
- result = udp4_lib_lookup2(net, INADDR_ANY, sport,
- daddr, hnum, dif,
+ result = udp4_lib_lookup2(net, saddr, sport,
+ INADDR_ANY, hnum, dif,
hslot2, slot2);
}
rcu_read_unlock();
*
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netfilter.h>
* Copyright (c) 2004-2006 Herbert Xu <herbert@gondor.apana.org.au>
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/route.h>
#include <linux/inetdevice.h>
#include <linux/init.h>
+#include <linux/slab.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
hlist_for_each_entry_rcu(dev, node, head, index_hlist) {
if (idx < s_idx)
goto cont;
- if (idx > s_idx)
+ if (h > s_h || idx > s_idx)
s_ip_idx = 0;
ip_idx = 0;
if ((idev = __in6_dev_get(dev)) == NULL)
#include <linux/list.h>
#include <linux/rcupdate.h>
#include <linux/in6.h>
+#include <linux/slab.h>
#include <net/addrconf.h>
#include <linux/if_addrlabel.h>
#include <linux/netlink.h>
#include <linux/proc_fs.h>
#include <linux/stat.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
inet_sk(sk)->pinet6 = np = inet6_sk_generic(sk);
np->hop_limit = -1;
- np->mcast_hops = -1;
+ np->mcast_hops = IPV6_DEFAULT_MCASTHOPS;
np->mc_loop = 1;
np->pmtudisc = IPV6_PMTUDISC_WANT;
np->ipv6only = net->ipv6.sysctl.bindv6only;
#include <crypto/hash.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/ah.h>
#include <linux/crypto.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/route.h>
+#include <linux/slab.h>
#include <net/ipv6.h>
#include <net/ndisc.h>
#include <linux/netdevice.h>
#include <linux/in6.h>
#include <linux/icmpv6.h>
+#include <linux/slab.h>
#include <net/dst.h>
#include <net/sock.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/netfilter.h>
+#include <linux/slab.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/jhash.h>
+#include <linux/slab.h>
#include <net/addrconf.h>
#include <net/inet_connection_sock.h>
#include <linux/in6.h>
#include <linux/init.h>
#include <linux/list.h>
+#include <linux/slab.h>
#ifdef CONFIG_PROC_FS
#include <linux/proc_fs.h>
#include <linux/route.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <linux/in6.h>
#include <linux/icmpv6.h>
#include <linux/mroute6.h>
+#include <linux/slab.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv6.h>
#include <linux/tcp.h>
#include <linux/route.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv6.h>
newskb->ip_summed = CHECKSUM_UNNECESSARY;
WARN_ON(!skb_dst(newskb));
- netif_rx(newskb);
+ netif_rx_ni(newskb);
return 0;
}
/* We must not fragment if the socket is set to force MTU discovery
* or if the skb it not generated by a local socket.
*/
- if (!skb->local_df) {
+ if (!skb->local_df && skb->len > mtu) {
skb->dev = skb_dst(skb)->dev;
icmpv6_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu);
IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)),
#include <linux/route.h>
#include <linux/rtnetlink.h>
#include <linux/netfilter_ipv6.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/protocol.h>
#include <linux/skbuff.h>
#include <net/sock.h>
unsigned char ttls[MAXMIFS];
int i;
+ if (mfc->mf6cc_parent >= MAXMIFS)
+ return -ENFILE;
+
memset(ttls, 255, MAXMIFS);
for (i = 0; i < MAXMIFS; i++) {
if (IF_ISSET(i, &mfc->mf6cc_ifset))
int ct;
struct rtnexthop *nhp;
struct net *net = mfc6_net(c);
- struct net_device *dev = net->ipv6.vif6_table[c->mf6c_parent].dev;
u8 *b = skb_tail_pointer(skb);
struct rtattr *mp_head;
- if (dev)
- RTA_PUT(skb, RTA_IIF, 4, &dev->ifindex);
+ /* If cache is unresolved, don't try to parse IIF and OIF */
+ if (c->mf6c_parent > MAXMIFS)
+ return -ENOENT;
+
+ if (MIF_EXISTS(net, c->mf6c_parent))
+ RTA_PUT(skb, RTA_IIF, 4, &net->ipv6.vif6_table[c->mf6c_parent].dev->ifindex);
mp_head = (struct rtattr *)skb_put(skb, RTA_LENGTH(0));
for (ct = c->mfc_un.res.minvif; ct < c->mfc_un.res.maxvif; ct++) {
- if (c->mfc_un.res.ttls[ct] < 255) {
+ if (MIF_EXISTS(net, ct) && c->mfc_un.res.ttls[ct] < 255) {
if (skb_tailroom(skb) < RTA_ALIGN(RTA_ALIGN(sizeof(*nhp)) + 4))
goto rtattr_failure;
nhp = (struct rtnexthop *)skb_put(skb, RTA_ALIGN(sizeof(*nhp)));
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/netfilter.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/snmp.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv6.h>
#include <linux/route.h>
#include <linux/init.h>
#include <linux/rcupdate.h>
+#include <linux/slab.h>
#ifdef CONFIG_SYSCTL
#include <linux/sysctl.h>
#endif
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/ipv6.h>
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/icmpv6.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
+#include <linux/slab.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
*/
#include <linux/module.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
+#include <linux/slab.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
*/
#include <linux/module.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
+#include <linux/slab.h>
#define RAW_VALID_HOOKS ((1 << NF_INET_PRE_ROUTING) | (1 << NF_INET_LOCAL_OUT))
.valid_hooks = RAW_VALID_HOOKS,
.me = THIS_MODULE,
.af = NFPROTO_IPV6,
- .priority = NF_IP6_PRI_FIRST,
+ .priority = NF_IP6_PRI_RAW,
};
/* The work comes in here from netfilter.c. */
*/
#include <linux/module.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
+#include <linux/slab.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("James Morris <jmorris <at> redhat.com>");
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/snmp.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
+#include <linux/slab.h>
#include <linux/sockios.h>
#include <linux/net.h>
#include <linux/in6.h>
#include <linux/random.h>
#include <linux/jhash.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/snmp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/nsproxy.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/snmp.h>
#include <net/ipv6.h>
{
int flags = 0;
- if (rt6_need_strict(&fl->fl6_dst))
+ if (fl->oif || rt6_need_strict(&fl->fl6_dst))
flags |= RT6_LOOKUP_F_IFACE;
if (!ipv6_addr_any(&fl->fl6_src))
rt = (struct rt6_info *) dst;
- if (rt && rt->rt6i_node && (rt->rt6i_node->fn_sernum == cookie))
+ if (rt->rt6i_node && (rt->rt6i_node->fn_sernum == cookie))
return dst;
return NULL;
struct rt6_info *rt = (struct rt6_info *) dst;
if (rt) {
- if (rt->rt6i_flags & RTF_CACHE)
- ip6_del_rt(rt);
- else
+ if (rt->rt6i_flags & RTF_CACHE) {
+ if (rt6_check_expired(rt)) {
+ ip6_del_rt(rt);
+ dst = NULL;
+ }
+ } else {
dst_release(dst);
+ dst = NULL;
+ }
}
- return NULL;
+ return dst;
}
static void ip6_link_failure(struct sk_buff *skb)
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/icmp.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <linux/init.h>
#include <linux/netfilter_ipv4.h>
#include <linux/sysctl.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
+#include <linux/slab.h>
#include <net/ndisc.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
#include <linux/jhash.h>
#include <linux/ipsec.h>
#include <linux/times.h>
+#include <linux/slab.h>
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
skb_reserve(buff, MAX_HEADER + sizeof(struct ipv6hdr) + tot_len);
t1 = (struct tcphdr *) skb_push(buff, tot_len);
- skb_reset_transport_header(skb);
+ skb_reset_transport_header(buff);
/* Swap the send and the receive. */
memset(t1, 0, sizeof(*t1));
#include <linux/mutex.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/ipv6.h>
#include <net/protocol.h>
#include <net/xfrm.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <net/ndisc.h>
if (hslot->count < hslot2->count)
goto begin;
- result = udp6_lib_lookup2(net, &in6addr_any, sport,
- daddr, hnum, dif,
+ result = udp6_lib_lookup2(net, saddr, sport,
+ &in6addr_any, hnum, dif,
hslot2, slot2);
}
rcu_read_unlock();
* Copyright (c) 2004-2006 Herbert Xu <herbert@gondor.apana.org.au>
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
xdst->u.dst.dev = dev;
dev_hold(dev);
- xdst->u.rt6.rt6i_idev = in6_dev_get(rt->u.dst.dev);
+ xdst->u.rt6.rt6i_idev = in6_dev_get(dev);
if (!xdst->u.rt6.rt6i_idev)
return -ENODEV;
*/
#include <linux/module.h>
#include <linux/xfrm.h>
+#include <linux/slab.h>
#include <linux/rculist.h>
#include <net/ip.h>
#include <net/xfrm.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/uio.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/list.h>
#include <linux/route.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <net/ipx.h>
#include <linux/smp_lock.h>
#include <linux/socket.h>
#include <linux/sockios.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/net.h>
#include <linux/irda.h>
#include <linux/socket.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <net/irda/irda.h>
#include <net/irda/irlmp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/irda/irda.h>
#include <net/irda/irmod.h>
********************************************************************/
#include <linux/init.h>
+#include <linux/gfp.h>
#include <net/irda/irda.h>
#include <net/irda/irlmp.h>
*
********************************************************************/
+#include <linux/gfp.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/termios.h>
#include <linux/tty.h>
#include <linux/kmod.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <asm/ioctls.h>
#include <asm/uaccess.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
*
********************************************************************/
+#include <linux/slab.h>
+
#include <net/irda/irda.h>
#include <net/irda/irlmp.h>
#include <net/irda/iriap.h>
*
********************************************************************/
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/socket.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/kernel.h>
#include <linux/string.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/random.h>
#include <linux/bitops.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/byteorder.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/irda/irda.h>
#include <net/irda/irlap_event.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
#include <linux/irda.h>
+#include <linux/slab.h>
#include <net/pkt_sched.h>
#include <net/sock.h>
#include "irnet_irda.h" /* Private header */
#include <linux/sched.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
/*
*/
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include "irnet_ppp.h" /* Private header */
/* Please put other headers in irnet.h - Thanks */
#include <linux/socket.h>
#include <linux/irda.h>
+#include <linux/gfp.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/irda/irda.h>
* Jean II
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <net/irda/irda.h>
#include <net/irda/irqueue.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
#include <linux/in6.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/xfrm.h>
int err;
out_skb = pfkey_xfrm_policy2msg_prep(xp);
- if (IS_ERR(out_skb)) {
- err = PTR_ERR(out_skb);
- goto out;
- }
+ if (IS_ERR(out_skb))
+ return PTR_ERR(out_skb);
+
err = pfkey_xfrm_policy2msg(out_skb, xp, dir);
if (err < 0)
return err;
out_hdr->sadb_msg_seq = c->seq;
out_hdr->sadb_msg_pid = c->pid;
pfkey_broadcast(out_skb, GFP_ATOMIC, BROADCAST_ALL, NULL, xp_net(xp));
-out:
return 0;
}
#include <linux/inet.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/net.h>
#include <linux/inet.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/net.h>
#include <linux/inet.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <linux/module.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/llc.h>
#include <net/llc_sap.h>
#include <net/llc_pdu.h>
* See the GNU General Public License for more details.
*/
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/llc_conn.h>
#include <net/llc_sap.h>
#include <net/sock.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/llc_sap.h>
#include <net/llc_conn.h>
#include <net/sock.h>
*
* See the GNU General Public License for more details.
*/
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
* See the GNU General Public License for more details.
*/
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/llc.h>
#include <net/llc_pdu.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <linux/llc.h>
+#include <linux/slab.h>
static int llc_mac_header_len(unsigned short devtype)
{
*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <net/llc.h>
#include <net/llc_sap.h>
#include <net/llc_conn.h>
*/
#include <linux/ieee80211.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
*/
#include <linux/ieee80211.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
HT_AGG_STATE_REQ_STOP_BA_MSK)) !=
HT_ADDBA_REQUESTED_MSK) {
spin_unlock_bh(&sta->lock);
- *state = HT_AGG_STATE_IDLE;
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "timer expired on tid %d but we are not "
"(or no longer) expecting addBA response there",
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <linux/rcupdate.h>
#include <net/cfg80211.h>
*/
#include <linux/kobject.h>
+#include <linux/slab.h>
#include "ieee80211_i.h"
#include "key.h"
#include "debugfs.h"
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <linux/notifier.h>
#include <net/mac80211.h>
#include <net/cfg80211.h>
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/if_ether.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/list.h>
#include <linux/rcupdate.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
/* just for IFNAMSIZ */
#include <linux/if.h>
+#include <linux/slab.h>
#include "led.h"
void ieee80211_led_rx(struct ieee80211_local *local)
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
sdata->vif.bss_conf.enable_beacon =
- !!rcu_dereference(sdata->u.ap.beacon);
+ !!sdata->u.ap.beacon;
break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.enable_beacon =
- !!rcu_dereference(sdata->u.ibss.presp);
+ !!sdata->u.ibss.presp;
break;
case NL80211_IFTYPE_MESH_POINT:
sdata->vif.bss_conf.enable_beacon = true;
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ieee80211_i.h"
#include "mesh.h"
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_ACTION:
- if (skb->len < IEEE80211_MIN_ACTION_SIZE)
- return RX_DROP_MONITOR;
- /* fall through */
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
skb_queue_tail(&ifmsh->skb_queue, skb);
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include "mesh.h"
#ifdef CONFIG_MAC80211_VERBOSE_MHWMP_DEBUG
if (SN_GT(mpath->sn, orig_sn) ||
(mpath->sn == orig_sn &&
action == MPATH_PREQ &&
- new_metric > mpath->metric)) {
+ new_metric >= mpath->metric)) {
process = false;
fresh_info = false;
}
mesh_path_sel_frame_tx(MPATH_PREP, flags, orig_addr,
cpu_to_le32(orig_sn), 0, target_addr,
- cpu_to_le32(target_sn), mpath->next_hop->sta.addr, hopcount,
+ cpu_to_le32(target_sn), next_hop, hopcount,
ttl, cpu_to_le32(lifetime), cpu_to_le32(metric),
0, sdata);
rcu_read_unlock();
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <net/mac80211.h>
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/random.h>
#include "ieee80211_i.h"
#include <linux/rtnetlink.h>
#include <linux/pm_qos_params.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
channel_type != local->hw.conf.channel_type;
+ if (local->tmp_channel)
+ local->tmp_channel_type = channel_type;
local->oper_channel_type = channel_type;
if (ht_changed) {
#include <linux/kernel.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include "rate.h"
#include "ieee80211_i.h"
#include "debugfs.h"
#include <linux/debugfs.h>
#include <linux/random.h>
#include <linux/ieee80211.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "rate.h"
#include "rc80211_minstrel.h"
#include <linux/skbuff.h>
#include <linux/debugfs.h>
#include <linux/ieee80211.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "rc80211_minstrel.h"
#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "rate.h"
#include "mesh.h"
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "rate.h"
*/
#include <linux/jiffies.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
goto handled;
}
break;
+ case MESH_PLINK_CATEGORY:
+ case MESH_PATH_SEL_CATEGORY:
+ if (ieee80211_vif_is_mesh(&sdata->vif))
+ return ieee80211_mesh_rx_mgmt(sdata, rx->skb);
+ break;
}
/*
#include <linux/if_arp.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- sta = rcu_dereference(local->sta_hash[STA_HASH(addr)]);
+ sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)],
+ rcu_read_lock_held() ||
+ lockdep_is_held(&local->sta_lock) ||
+ lockdep_is_held(&local->sta_mtx));
while (sta) {
if (sta->sdata == sdata &&
memcmp(sta->sta.addr, addr, ETH_ALEN) == 0)
break;
- sta = rcu_dereference(sta->hnext);
+ sta = rcu_dereference_check(sta->hnext,
+ rcu_read_lock_held() ||
+ lockdep_is_held(&local->sta_lock) ||
+ lockdep_is_held(&local->sta_mtx));
}
return sta;
}
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
- sta = rcu_dereference(local->sta_hash[STA_HASH(addr)]);
+ sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)],
+ rcu_read_lock_held() ||
+ lockdep_is_held(&local->sta_lock) ||
+ lockdep_is_held(&local->sta_mtx));
while (sta) {
if ((sta->sdata == sdata ||
sta->sdata->bss == sdata->bss) &&
memcmp(sta->sta.addr, addr, ETH_ALEN) == 0)
break;
- sta = rcu_dereference(sta->hnext);
+ sta = rcu_dereference_check(sta->hnext,
+ rcu_read_lock_held() ||
+ lockdep_is_held(&local->sta_lock) ||
+ lockdep_is_held(&local->sta_mtx));
}
return sta;
}
void ieee80211_tx_pending(unsigned long data)
{
struct ieee80211_local *local = (struct ieee80211_local *)data;
+ struct ieee80211_sub_if_data *sdata;
unsigned long flags;
int i;
bool txok;
if (!txok)
break;
}
+
+ if (skb_queue_empty(&local->pending[i]))
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(
+ netdev_get_tx_queue(sdata->dev, i));
}
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
/* someone still has this queue stopped */
return;
- if (!skb_queue_empty(&local->pending[queue]))
+ if (skb_queue_empty(&local->pending[queue])) {
+ rcu_read_lock();
+ list_for_each_entry_rcu(sdata, &local->interfaces, list)
+ netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
+ rcu_read_unlock();
+ } else
tasklet_schedule(&local->tx_pending_tasklet);
-
- rcu_read_lock();
- list_for_each_entry_rcu(sdata, &local->interfaces, list)
- netif_tx_wake_queue(netdev_get_tx_queue(sdata->dev, queue));
- rcu_read_unlock();
}
void ieee80211_wake_queue_by_reason(struct ieee80211_hw *hw, int queue,
*/
res = drv_start(local);
if (res) {
- WARN(local->suspended, "Harware became unavailable "
- "upon resume. This is could be a software issue"
- "prior to suspend or a hardware issue\n");
+ WARN(local->suspended, "Hardware became unavailable "
+ "upon resume. This could be a software issue "
+ "prior to suspend or a hardware issue.\n");
return res;
}
#include <linux/err.h>
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <net/mac80211.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/crc32.h>
+#include <linux/slab.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include <linux/netdevice.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/compiler.h>
#include <linux/ieee80211.h>
+#include <linux/gfp.h>
#include <asm/unaligned.h>
#include <net/mac80211.h>
#include <linux/inetdevice.h>
#include <linux/proc_fs.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/netfilter.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/protocol.h>
#include <net/tcp.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/proc_fs.h> /* for proc_net_* */
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/jhash.h>
#include <linux/random.h>
#include <linux/tcp.h>
#include <linux/sctp.h>
#include <linux/icmp.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/tcp.h>
#include <linux/workqueue.h>
#include <linux/swap.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/ip.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/sysctl.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/netfilter.h>
+#include <linux/gfp.h>
#include <net/protocol.h>
#include <net/tcp.h>
#include <asm/unaligned.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/ip.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/skbuff.h>
#include <linux/jiffies.h>
#include <linux/list.h>
+#include <linux/slab.h>
/* for sysctl */
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
+#include <linux/gfp.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <net/protocol.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/ip.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/net.h>
#include <linux/gcd.h>
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/tcp.h> /* for tcphdr */
#include <net/ip.h>
#include <net/tcp.h> /* for csum_tcpudp_magic */
*/
#include <linux/netfilter.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/in.h>
#include <linux/udp.h>
#include <linux/netfilter.h>
+#include <linux/gfp.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_expect.h>
#include <linux/percpu.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_core.h>
#include <linux/moduleparam.h>
#include <linux/netfilter.h>
#include <linux/ip.h>
+#include <linux/slab.h>
#include <linux/ipv6.h>
#include <linux/ctype.h>
#include <linux/inet.h>
#include <linux/inet.h>
#include <linux/in.h>
#include <linux/ip.h>
+#include <linux/slab.h>
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/skbuff.h>
#include <linux/skbuff.h>
#include <linux/vmalloc.h>
#include <linux/stddef.h>
-#include <linux/slab.h>
#include <linux/random.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/netfilter.h>
+#include <linux/slab.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_expect.h>
#include <linux/netlink.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/netfilter.h>
#include <net/netlink.h>
nlmsg_failure:
kfree_skb(skb);
errout:
- nfnetlink_set_err(net, 0, group, -ENOBUFS);
+ if (nfnetlink_set_err(net, 0, group, -ENOBUFS) > 0)
+ return -ENOBUFS;
+
return 0;
}
#endif /* CONFIG_NF_CONNTRACK_EVENTS */
#include <linux/types.h>
#include <linux/netfilter.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/skbuff.h>
#include <linux/vmalloc.h>
#include <linux/spinlock.h>
#include <linux/skbuff.h>
#include <linux/dccp.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <linux/in.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/dst.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/netfilter.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include <linux/tcp.h>
#include <net/netfilter/nf_conntrack.h>
#include <linux/types.h>
#include <linux/netfilter.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/proc_fs.h>
}
EXPORT_SYMBOL_GPL(nfnetlink_send);
-void nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error)
+int nfnetlink_set_err(struct net *net, u32 pid, u32 group, int error)
{
- netlink_set_err(net->nfnl, pid, group, error);
+ return netlink_set_err(net->nfnl, pid, group, error);
}
EXPORT_SYMBOL_GPL(nfnetlink_set_err);
#include <linux/list.h>
#include <linux/jhash.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/netfilter/nf_log.h>
#include <net/netfilter/nfnetlink_log.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/netdevice.h>
#include <linux/netfilter.h>
#include <linux/vmalloc.h>
#include <linux/mutex.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <linux/netfilter/x_tables.h>
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/skbuff.h>
#include <linux/selinux.h>
#include <linux/netfilter_ipv4/ip_tables.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/netfilter/x_tables.h>
+#include <linux/slab.h>
#include <linux/leds.h>
#include <linux/mutex.h>
#include <linux/jhash.h>
#include <linux/rtnetlink.h>
#include <linux/random.h>
+#include <linux/slab.h>
#include <net/gen_stats.h>
#include <net/netlink.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/ip.h>
+#include <linux/gfp.h>
#include <linux/ipv6.h>
#include <linux/tcp.h>
#include <net/dst.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/jhash.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/module.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <net/ip.h>
#include <linux/dccp.h>
case 64 ... 95:
i[2] = maskl(i[2], p - 64);
i[3] = 0;
+ break;
case 96 ... 127:
i[3] = maskl(i[3], p - 96);
break;
struct xt_hashlimit_htable *htable = s->private;
unsigned int *bucket = (unsigned int *)v;
- kfree(bucket);
+ if (!IS_ERR(bucket))
+ kfree(bucket);
spin_unlock_bh(&htable->lock);
}
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
* Sam Johnston <samj@samj.net>
*/
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/netfilter/x_tables.h>
#include <linux/bitops.h>
#include <linux/skbuff.h>
#include <linux/inet.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
for (i = 0; i < e->nstamps; i++) {
if (info->seconds && time_after(time, e->stamps[i]))
continue;
- if (info->hit_count && ++hits >= info->hit_count) {
+ if (!info->hit_count || ++hits >= info->hit_count) {
ret = !ret;
break;
}
#include <linux/spinlock.h>
#include <linux/skbuff.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <linux/netfilter/xt_statistic.h>
#include <linux/netfilter/x_tables.h>
* published by the Free Software Foundation.
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/skbuff.h>
#include <linux/audit.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/audit.h>
+#include <linux/slab.h>
#include <net/netlabel.h>
#include <net/cipso_ipv4.h>
#include <asm/bug.h>
};
/* Domain hash table */
-/* XXX - updates should be so rare that having one spinlock for the entire
- * hash table should be okay */
+/* updates should be so rare that having one spinlock for the entire hash table
+ * should be okay */
static DEFINE_SPINLOCK(netlbl_domhsh_lock);
+#define netlbl_domhsh_rcu_deref(p) \
+ rcu_dereference_check(p, rcu_read_lock_held() || \
+ lockdep_is_held(&netlbl_domhsh_lock))
static struct netlbl_domhsh_tbl *netlbl_domhsh = NULL;
static struct netlbl_dom_map *netlbl_domhsh_def = NULL;
* Description:
* This is the hashing function for the domain hash table, it returns the
* correct bucket number for the domain. The caller is responsibile for
- * calling the rcu_read_[un]lock() functions.
+ * ensuring that the hash table is protected with either a RCU read lock or the
+ * hash table lock.
*
*/
static u32 netlbl_domhsh_hash(const char *key)
for (iter = 0, val = 0, len = strlen(key); iter < len; iter++)
val = (val << 4 | (val >> (8 * sizeof(u32) - 4))) ^ key[iter];
- return val & (rcu_dereference(netlbl_domhsh)->size - 1);
+ return val & (netlbl_domhsh_rcu_deref(netlbl_domhsh)->size - 1);
}
/**
* Description:
* Searches the domain hash table and returns a pointer to the hash table
* entry if found, otherwise NULL is returned. The caller is responsibile for
- * the rcu hash table locks (i.e. the caller much call rcu_read_[un]lock()).
+ * ensuring that the hash table is protected with either a RCU read lock or the
+ * hash table lock.
*
*/
static struct netlbl_dom_map *netlbl_domhsh_search(const char *domain)
if (domain != NULL) {
bkt = netlbl_domhsh_hash(domain);
- bkt_list = &rcu_dereference(netlbl_domhsh)->tbl[bkt];
+ bkt_list = &netlbl_domhsh_rcu_deref(netlbl_domhsh)->tbl[bkt];
list_for_each_entry_rcu(iter, bkt_list, list)
if (iter->valid && strcmp(iter->domain, domain) == 0)
return iter;
* Searches the domain hash table and returns a pointer to the hash table
* entry if an exact match is found, if an exact match is not present in the
* hash table then the default entry is returned if valid otherwise NULL is
- * returned. The caller is responsibile for the rcu hash table locks
- * (i.e. the caller much call rcu_read_[un]lock()).
+ * returned. The caller is responsibile ensuring that the hash table is
+ * protected with either a RCU read lock or the hash table lock.
*
*/
static struct netlbl_dom_map *netlbl_domhsh_search_def(const char *domain)
entry = netlbl_domhsh_search(domain);
if (entry == NULL) {
- entry = rcu_dereference(netlbl_domhsh_def);
+ entry = netlbl_domhsh_rcu_deref(netlbl_domhsh_def);
if (entry != NULL && !entry->valid)
entry = NULL;
}
struct netlbl_af6list *tmp6;
#endif /* IPv6 */
+ /* XXX - we can remove this RCU read lock as the spinlock protects the
+ * entire function, but before we do we need to fixup the
+ * netlbl_af[4,6]list RCU functions to do "the right thing" with
+ * respect to rcu_dereference() when only a spinlock is held. */
rcu_read_lock();
-
spin_lock(&netlbl_domhsh_lock);
if (entry->domain != NULL)
entry_old = netlbl_domhsh_search(entry->domain);
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/audit.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/skbuff.h>
#include <linux/in.h>
#include <linux/in6.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/netlink.h>
#include <net/genetlink.h>
#include <linux/notifier.h>
#include <linux/netdevice.h>
#include <linux/security.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/netlink.h>
#include <net/genetlink.h>
/* updates should be so rare that having one spinlock for the entire
* hash table should be okay */
static DEFINE_SPINLOCK(netlbl_unlhsh_lock);
+#define netlbl_unlhsh_rcu_deref(p) \
+ rcu_dereference_check(p, rcu_read_lock_held() || \
+ lockdep_is_held(&netlbl_unlhsh_lock))
static struct netlbl_unlhsh_tbl *netlbl_unlhsh = NULL;
static struct netlbl_unlhsh_iface *netlbl_unlhsh_def = NULL;
* Description:
* This is the hashing function for the unlabeled hash table, it returns the
* bucket number for the given device/interface. The caller is responsible for
- * calling the rcu_read_[un]lock() functions.
+ * ensuring that the hash table is protected with either a RCU read lock or
+ * the hash table lock.
*
*/
static u32 netlbl_unlhsh_hash(int ifindex)
{
- /* this is taken _almost_ directly from
- * security/selinux/netif.c:sel_netif_hasfn() as they do pretty much
- * the same thing */
- return ifindex & (rcu_dereference(netlbl_unlhsh)->size - 1);
+ return ifindex & (netlbl_unlhsh_rcu_deref(netlbl_unlhsh)->size - 1);
}
/**
* Description:
* Searches the unlabeled connection hash table and returns a pointer to the
* interface entry which matches @ifindex, otherwise NULL is returned. The
- * caller is responsible for calling the rcu_read_[un]lock() functions.
+ * caller is responsible for ensuring that the hash table is protected with
+ * either a RCU read lock or the hash table lock.
*
*/
static struct netlbl_unlhsh_iface *netlbl_unlhsh_search_iface(int ifindex)
struct netlbl_unlhsh_iface *iter;
bkt = netlbl_unlhsh_hash(ifindex);
- bkt_list = &rcu_dereference(netlbl_unlhsh)->tbl[bkt];
+ bkt_list = &netlbl_unlhsh_rcu_deref(netlbl_unlhsh)->tbl[bkt];
list_for_each_entry_rcu(iter, bkt_list, list)
if (iter->valid && iter->ifindex == ifindex)
return iter;
return NULL;
}
-/**
- * netlbl_unlhsh_search_iface_def - Search for a matching interface entry
- * @ifindex: the network interface
- *
- * Description:
- * Searches the unlabeled connection hash table and returns a pointer to the
- * interface entry which matches @ifindex. If an exact match can not be found
- * and there is a valid default entry, the default entry is returned, otherwise
- * NULL is returned. The caller is responsible for calling the
- * rcu_read_[un]lock() functions.
- *
- */
-static struct netlbl_unlhsh_iface *netlbl_unlhsh_search_iface_def(int ifindex)
-{
- struct netlbl_unlhsh_iface *entry;
-
- entry = netlbl_unlhsh_search_iface(ifindex);
- if (entry != NULL)
- return entry;
-
- entry = rcu_dereference(netlbl_unlhsh_def);
- if (entry != NULL && entry->valid)
- return entry;
-
- return NULL;
-}
-
/**
* netlbl_unlhsh_add_addr4 - Add a new IPv4 address entry to the hash table
* @iface: the associated interface entry
* Description:
* Add a new address entry into the unlabeled connection hash table using the
* interface entry specified by @iface. On success zero is returned, otherwise
- * a negative value is returned. The caller is responsible for calling the
- * rcu_read_[un]lock() functions.
+ * a negative value is returned.
*
*/
static int netlbl_unlhsh_add_addr4(struct netlbl_unlhsh_iface *iface,
* Description:
* Add a new address entry into the unlabeled connection hash table using the
* interface entry specified by @iface. On success zero is returned, otherwise
- * a negative value is returned. The caller is responsible for calling the
- * rcu_read_[un]lock() functions.
+ * a negative value is returned.
*
*/
static int netlbl_unlhsh_add_addr6(struct netlbl_unlhsh_iface *iface,
* Description:
* Add a new, empty, interface entry into the unlabeled connection hash table.
* On success a pointer to the new interface entry is returned, on failure NULL
- * is returned. The caller is responsible for calling the rcu_read_[un]lock()
- * functions.
+ * is returned.
*
*/
static struct netlbl_unlhsh_iface *netlbl_unlhsh_add_iface(int ifindex)
if (netlbl_unlhsh_search_iface(ifindex) != NULL)
goto add_iface_failure;
list_add_tail_rcu(&iface->list,
- &rcu_dereference(netlbl_unlhsh)->tbl[bkt]);
+ &netlbl_unlhsh_rcu_deref(netlbl_unlhsh)->tbl[bkt]);
} else {
INIT_LIST_HEAD(&iface->list);
- if (rcu_dereference(netlbl_unlhsh_def) != NULL)
+ if (netlbl_unlhsh_rcu_deref(netlbl_unlhsh_def) != NULL)
goto add_iface_failure;
rcu_assign_pointer(netlbl_unlhsh_def, iface);
}
*
* Description:
* Remove an IP address entry from the unlabeled connection hash table.
- * Returns zero on success, negative values on failure. The caller is
- * responsible for calling the rcu_read_[un]lock() functions.
+ * Returns zero on success, negative values on failure.
*
*/
static int netlbl_unlhsh_remove_addr4(struct net *net,
*
* Description:
* Remove an IP address entry from the unlabeled connection hash table.
- * Returns zero on success, negative values on failure. The caller is
- * responsible for calling the rcu_read_[un]lock() functions.
+ * Returns zero on success, negative values on failure.
*
*/
static int netlbl_unlhsh_remove_addr6(struct net *net,
struct netlbl_unlhsh_iface *iface;
rcu_read_lock();
- iface = netlbl_unlhsh_search_iface_def(skb->skb_iif);
+ iface = netlbl_unlhsh_search_iface(skb->skb_iif);
if (iface == NULL)
+ iface = rcu_dereference(netlbl_unlhsh_def);
+ if (iface == NULL || !iface->valid)
goto unlabel_getattr_nolabel;
switch (family) {
case PF_INET: {
#include <linux/audit.h>
#include <linux/tty.h>
#include <linux/security.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <net/netlink.h>
#include <net/genetlink.h>
struct netlink_sock *nlk = nlk_sk(sk);
struct sockaddr_nl *nladdr = (struct sockaddr_nl *)addr;
+ if (alen < sizeof(addr->sa_family))
+ return -EINVAL;
+
if (addr->sa_family == AF_UNSPEC) {
sk->sk_state = NETLINK_UNCONNECTED;
nlk->dst_pid = 0;
struct netlink_set_err_data *p)
{
struct netlink_sock *nlk = nlk_sk(sk);
+ int ret = 0;
if (sk == p->exclude_sk)
goto out;
!test_bit(p->group - 1, nlk->groups))
goto out;
+ if (p->code == ENOBUFS && nlk->flags & NETLINK_RECV_NO_ENOBUFS) {
+ ret = 1;
+ goto out;
+ }
+
sk->sk_err = p->code;
sk->sk_error_report(sk);
out:
- return 0;
+ return ret;
}
/**
* @pid: the PID of a process that we want to skip (if any)
* @groups: the broadcast group that will notice the error
* @code: error code, must be negative (as usual in kernelspace)
+ *
+ * This function returns the number of broadcast listeners that have set the
+ * NETLINK_RECV_NO_ENOBUFS socket option.
*/
-void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
+int netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
{
struct netlink_set_err_data info;
struct hlist_node *node;
struct sock *sk;
+ int ret = 0;
info.exclude_sk = ssk;
info.pid = pid;
read_lock(&nl_table_lock);
sk_for_each_bound(sk, node, &nl_table[ssk->sk_protocol].mc_list)
- do_one_set_err(sk, &info);
+ ret += do_one_set_err(sk, &info);
read_unlock(&nl_table_lock);
+ return ret;
}
EXPORT_SYMBOL(netlink_set_err);
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/if_ether.h> /* For the statistics structure. */
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
* Copyright Tomi Manninen OH2BNS (oh2bns@sral.fi)
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/timer.h>
#include <net/ax25.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/kernel.h>
#include <linux/kmod.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/ip.h>
#include <net/protocol.h>
case SIOCGIFDSTADDR:
case SIOCSIFDSTADDR:
case SIOCSIFFLAGS:
- if (!net_eq(sock_net(sk), &init_net))
- return -ENOIOCTLCMD;
return inet_dgram_ops.ioctl(sock, cmd, arg);
#endif
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <asm/unaligned.h>
#include <net/sock.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <asm/ioctls.h>
#include <net/sock.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <linux/kernel.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/phonet.h>
#include <linux/proc_fs.h>
#include <linux/kernel.h>
#include <linux/netlink.h>
#include <linux/phonet.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/phonet/pn_dev.h>
* 02110-1301 USA
*/
+#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/net.h>
#include <linux/poll.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/in.h>
#include <linux/poll.h>
#include <net/sock.h>
* SOFTWARE.
*
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/rbtree.h>
*/
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/inet_hashtables.h>
#include "rds.h"
#include <linux/inetdevice.h>
#include <linux/if_arp.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "rds.h"
#include "ib.h"
*/
#include <linux/kernel.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "rds.h"
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "rds.h"
#include "rdma.h"
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <rdma/rdma_cm.h>
*/
#include <linux/percpu.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/proc_fs.h>
#include "rds.h"
#include <linux/inetdevice.h>
#include <linux/if_arp.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "rds.h"
#include "iw.h"
*/
#include <linux/kernel.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include "rds.h"
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "rds.h"
#include "rdma.h"
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <rdma/rdma_cm.h>
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include "rds.h"
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "rds.h"
#include "rdma.h"
*
*/
#include <linux/highmem.h>
+#include <linux/gfp.h>
#include "rds.h"
*
*/
#include <linux/pagemap.h>
+#include <linux/slab.h>
#include <linux/rbtree.h>
#include <linux/dma-mapping.h> /* for DMA_*_DEVICE */
ret = PTR_ERR(cm_id);
printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
"rdma_create_id() returned %d\n", ret);
- goto out;
+ return ret;
}
sin.sin_family = AF_INET,
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/in.h>
*
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <linux/in.h>
#include <linux/list.h>
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include <net/tcp.h>
*
*/
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/in.h>
#include <net/tcp.h>
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <net/tcp.h>
#include "rds.h"
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/fs.h>
+#include <linux/slab.h>
#include "rfkill.h"
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/in.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/fcntl.h>
#include <linux/in.h>
#include <linux/if_ether.h>
+#include <linux/slab.h>
#include <asm/system.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
* Copyright (C) Jonathan Naylor G4KLX (g4klx@g4klx.demon.co.uk)
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/timer.h>
#include <net/ax25.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/gfp.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/string.h>
#include <linux/sockios.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <net/ax25.h>
#include <linux/inet.h>
#include <linux/netdevice.h>
#include <linux/module.h>
#include <linux/net.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/icmp.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <net/ip.h>
/* get a notification message to send to the server app */
notification = alloc_skb(0, GFP_NOFS);
+ if (!notification) {
+ _debug("no memory");
+ ret = -ENOMEM;
+ goto error_nofree;
+ }
rxrpc_new_skb(notification);
notification->mark = RXRPC_SKB_MARK_NEW_CALL;
ret = -ECONNREFUSED;
error:
rxrpc_free_skb(notification);
+error_nofree:
_leave(" = %d", ret);
return ret;
}
#include <linux/circ_buf.h>
#include <linux/net.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/udp.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/circ_buf.h>
#include <net/sock.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/crypto.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/icmp.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <net/ip.h>
#include <linux/key-type.h>
#include <linux/crypto.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <keys/rxrpc-type.h>
#include <linux/module.h>
#include <linux/net.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
*/
#include <linux/net.h>
+#include <linux/gfp.h>
#include <linux/skbuff.h>
#include <linux/circ_buf.h>
#include <net/sock.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/icmp.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <net/ip.h>
#include <linux/module.h>
#include <linux/net.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include "ar-internal.h"
#include <linux/crypto.h>
#include <linux/scatterlist.h>
#include <linux/ctype.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <keys/rxrpc-type.h>
module will be called cls_flow.
config NET_CLS_CGROUP
- bool "Control Group Classifier"
+ tristate "Control Group Classifier"
select NET_CLS
depends on CGROUPS
---help---
Say Y here if you want to classify packets based on the control
cgroup of their process.
+ To compile this code as a module, choose M here: the
+ module will be called cls_cgroup.
+
config NET_EMATCH
bool "Extended Matches"
select NET_CLS
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_ipt.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <net/net_namespace.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_pedit.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/act_api.h>
#include <net/netlink.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/kmod.h>
#include <linux/netlink.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/netlink.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/errno.h>
u32 classid;
};
+static struct cgroup_subsys_state *cgrp_create(struct cgroup_subsys *ss,
+ struct cgroup *cgrp);
+static void cgrp_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp);
+static int cgrp_populate(struct cgroup_subsys *ss, struct cgroup *cgrp);
+
+struct cgroup_subsys net_cls_subsys = {
+ .name = "net_cls",
+ .create = cgrp_create,
+ .destroy = cgrp_destroy,
+ .populate = cgrp_populate,
+#ifdef CONFIG_NET_CLS_CGROUP
+ .subsys_id = net_cls_subsys_id,
+#else
+#define net_cls_subsys_id net_cls_subsys.subsys_id
+#endif
+ .module = THIS_MODULE,
+};
+
+
static inline struct cgroup_cls_state *cgrp_cls_state(struct cgroup *cgrp)
{
return container_of(cgroup_subsys_state(cgrp, net_cls_subsys_id),
return cgroup_add_files(cgrp, ss, ss_files, ARRAY_SIZE(ss_files));
}
-struct cgroup_subsys net_cls_subsys = {
- .name = "net_cls",
- .create = cgrp_create,
- .destroy = cgrp_destroy,
- .populate = cgrp_populate,
- .subsys_id = net_cls_subsys_id,
-};
-
struct cls_cgroup_head
{
u32 handle;
static int __init init_cgroup_cls(void)
{
- return register_tcf_proto_ops(&cls_cgroup_ops);
+ int ret = register_tcf_proto_ops(&cls_cgroup_ops);
+ if (ret)
+ return ret;
+ ret = cgroup_load_subsys(&net_cls_subsys);
+ if (ret)
+ unregister_tcf_proto_ops(&cls_cgroup_ops);
+ return ret;
}
static void __exit exit_cgroup_cls(void)
{
unregister_tcf_proto_ops(&cls_cgroup_ops);
+ cgroup_unload_subsys(&net_cls_subsys);
}
module_init(init_cgroup_cls);
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/if_vlan.h>
+#include <linux/slab.h>
#include <net/pkt_cls.h>
#include <net/ip.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/errno.h>
+#include <linux/slab.h>
#include <net/act_api.h>
#include <net/netlink.h>
#include <net/pkt_cls.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
* only available if that subsystem is enabled in the kernel.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
* Authors: Thomas Graf <tgraf@suug.ch>
*/
+#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
* Authors: Thomas Graf <tgraf@suug.ch>
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/hrtimer.h>
#include <linux/lockdep.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/sock.h>
/* Written 1998-2000 by Werner Almesberger, EPFL ICA */
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/errno.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/errno.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <net/pkt_sched.h>
/* Main transmission queue. */
* For all the glorious comments look at include/net/red.h
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/rbtree.h>
#include <linux/workqueue.h>
+#include <linux/slab.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ipv6.h>
#include <linux/skbuff.h>
#include <linux/jhash.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/if_arp.h>
/* Remove any peer addresses not present in the new association. */
list_for_each_safe(pos, temp, &asoc->peer.transport_addr_list) {
trans = list_entry(pos, struct sctp_transport, transports);
- if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr))
- sctp_assoc_del_peer(asoc, &trans->ipaddr);
+ if (!sctp_assoc_lookup_paddr(new, &trans->ipaddr)) {
+ sctp_assoc_rm_peer(asoc, trans);
+ continue;
+ }
if (asoc->state >= SCTP_STATE_ESTABLISHED)
sctp_transport_reset(trans);
* be incorporated into the next SCTP release.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/crypto.h>
#include <linux/scatterlist.h>
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/in.h>
#include <net/sock.h>
#include <net/ipv6.h>
#include <linux/net.h>
#include <linux/inet.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
/* Use SCTP specific send buffer space queues. */
ep->sndbuf_policy = sctp_sndbuf_policy;
+ sk->sk_data_ready = sctp_data_ready;
sk->sk_write_space = sctp_write_space;
sock_set_flag(sk, SOCK_USE_WRITE_QUEUE);
#include <linux/socket.h>
#include <linux/ip.h>
#include <linux/time.h> /* For struct timeval */
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/icmp.h>
#include <net/snmp.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
/* Initialize an SCTP inqueue. */
void sctp_inq_init(struct sctp_inq *queue)
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/ipsec.h>
+#include <linux/slab.h>
#include <linux/ipv6.h>
#include <linux/icmpv6.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/inet_ecn.h>
#include <net/ip.h>
#include <net/icmp.h>
#include <linux/list.h> /* For struct list_head */
#include <linux/socket.h>
#include <linux/ip.h>
+#include <linux/slab.h>
#include <net/sock.h> /* For skb_set_owner_w */
#include <net/sctp/sctp.h>
#include <linux/socket.h>
#include <linux/ip.h>
#include <linux/time.h> /* For struct timeval */
+#include <linux/gfp.h>
#include <net/sock.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/swap.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/protocol.h>
#include <net/ip.h>
#include <linux/inet.h>
#include <linux/scatterlist.h>
#include <linux/crypto.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/skbuff.h>
cpu_to_be16(sizeof(struct sctp_paramhdr)),
};
-/* A helper to initialize to initialize an op error inside a
+/* A helper to initialize an op error inside a
* provided chunk, as most cause codes will be embedded inside an
* abort chunk.
*/
chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
}
+/* A helper to initialize an op error inside a
+ * provided chunk, as most cause codes will be embedded inside an
+ * abort chunk. Differs from sctp_init_cause in that it won't oops
+ * if there isn't enough space in the op error chunk
+ */
+int sctp_init_cause_fixed(struct sctp_chunk *chunk, __be16 cause_code,
+ size_t paylen)
+{
+ sctp_errhdr_t err;
+ __u16 len;
+
+ /* Cause code constants are now defined in network order. */
+ err.cause = cause_code;
+ len = sizeof(sctp_errhdr_t) + paylen;
+ err.length = htons(len);
+
+ if (skb_tailroom(chunk->skb) > len)
+ return -ENOSPC;
+ chunk->subh.err_hdr = sctp_addto_chunk_fixed(chunk,
+ sizeof(sctp_errhdr_t),
+ &err);
+ return 0;
+}
/* 3.3.2 Initiation (INIT) (1)
*
* This chunk is used to initiate a SCTP association between two
sp = sctp_sk(asoc->base.sk);
num_types = sp->pf->supported_addrs(sp, types);
- chunksize = sizeof(init) + addrs_len + SCTP_SAT_LEN(num_types);
+ chunksize = sizeof(init) + addrs_len;
+ chunksize += WORD_ROUND(SCTP_SAT_LEN(num_types));
chunksize += sizeof(ecap_param);
if (sctp_prsctp_enable)
/* Add HMACS parameter length if any were defined */
auth_hmacs = (sctp_paramhdr_t *)asoc->c.auth_hmacs;
if (auth_hmacs->length)
- chunksize += ntohs(auth_hmacs->length);
+ chunksize += WORD_ROUND(ntohs(auth_hmacs->length));
else
auth_hmacs = NULL;
/* Add CHUNKS parameter length */
auth_chunks = (sctp_paramhdr_t *)asoc->c.auth_chunks;
if (auth_chunks->length)
- chunksize += ntohs(auth_chunks->length);
+ chunksize += WORD_ROUND(ntohs(auth_chunks->length));
else
auth_chunks = NULL;
/* If we have any extensions to report, account for that */
if (num_ext)
- chunksize += sizeof(sctp_supported_ext_param_t) + num_ext;
+ chunksize += WORD_ROUND(sizeof(sctp_supported_ext_param_t) +
+ num_ext);
/* RFC 2960 3.3.2 Initiation (INIT) (1)
*
auth_hmacs = (sctp_paramhdr_t *)asoc->c.auth_hmacs;
if (auth_hmacs->length)
- chunksize += ntohs(auth_hmacs->length);
+ chunksize += WORD_ROUND(ntohs(auth_hmacs->length));
else
auth_hmacs = NULL;
auth_chunks = (sctp_paramhdr_t *)asoc->c.auth_chunks;
if (auth_chunks->length)
- chunksize += ntohs(auth_chunks->length);
+ chunksize += WORD_ROUND(ntohs(auth_chunks->length));
else
auth_chunks = NULL;
}
if (num_ext)
- chunksize += sizeof(sctp_supported_ext_param_t) + num_ext;
+ chunksize += WORD_ROUND(sizeof(sctp_supported_ext_param_t) +
+ num_ext);
/* Now allocate and fill out the chunk. */
retval = sctp_make_chunk(asoc, SCTP_CID_INIT_ACK, 0, chunksize);
return retval;
}
+/* Create an Operation Error chunk of a fixed size,
+ * specifically, max(asoc->pathmtu, SCTP_DEFAULT_MAXSEGMENT)
+ * This is a helper function to allocate an error chunk for
+ * for those invalid parameter codes in which we may not want
+ * to report all the errors, if the incomming chunk is large
+ */
+static inline struct sctp_chunk *sctp_make_op_error_fixed(
+ const struct sctp_association *asoc,
+ const struct sctp_chunk *chunk)
+{
+ size_t size = asoc ? asoc->pathmtu : 0;
+
+ if (!size)
+ size = SCTP_DEFAULT_MAXSEGMENT;
+
+ return sctp_make_op_error_space(asoc, chunk, size);
+}
+
/* Create an Operation Error chunk. */
struct sctp_chunk *sctp_make_op_error(const struct sctp_association *asoc,
const struct sctp_chunk *chunk,
return target;
}
+/* Append bytes to the end of a chunk. Returns NULL if there isn't sufficient
+ * space in the chunk
+ */
+void *sctp_addto_chunk_fixed(struct sctp_chunk *chunk,
+ int len, const void *data)
+{
+ if (skb_tailroom(chunk->skb) > len)
+ return sctp_addto_chunk(chunk, len, data);
+ else
+ return NULL;
+}
+
/* Append bytes from user space to the end of a chunk. Will panic if
* chunk is not big enough.
* Returns a kernel err value.
* returning multiple unknown parameters.
*/
if (NULL == *errp)
- *errp = sctp_make_op_error_space(asoc, chunk,
- ntohs(chunk->chunk_hdr->length));
+ *errp = sctp_make_op_error_fixed(asoc, chunk);
if (*errp) {
- sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM,
+ sctp_init_cause_fixed(*errp, SCTP_ERROR_UNKNOWN_PARAM,
WORD_ROUND(ntohs(param.p->length)));
- sctp_addto_chunk(*errp,
+ sctp_addto_chunk_fixed(*errp,
WORD_ROUND(ntohs(param.p->length)),
param.v);
} else {
sctp_chunk_free(asconf);
asoc->addip_last_asconf = NULL;
- /* Send the next asconf chunk from the addip chunk queue. */
- if (!list_empty(&asoc->addip_chunk_list)) {
- struct list_head *entry = asoc->addip_chunk_list.next;
- asconf = list_entry(entry, struct sctp_chunk, list);
-
- list_del_init(entry);
-
- /* Hold the chunk until an ASCONF_ACK is received. */
- sctp_chunk_hold(asconf);
- if (sctp_primitive_ASCONF(asoc, asconf))
- sctp_chunk_free(asconf);
- else
- asoc->addip_last_asconf = asconf;
- }
-
return retval;
}
#include <linux/types.h>
#include <linux/socket.h>
#include <linux/ip.h>
+#include <linux/gfp.h>
#include <net/sock.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
}
+/* Sent the next ASCONF packet currently stored in the association.
+ * This happens after the ASCONF_ACK was succeffully processed.
+ */
+static void sctp_cmd_send_asconf(struct sctp_association *asoc)
+{
+ /* Send the next asconf chunk from the addip chunk
+ * queue.
+ */
+ if (!list_empty(&asoc->addip_chunk_list)) {
+ struct list_head *entry = asoc->addip_chunk_list.next;
+ struct sctp_chunk *asconf = list_entry(entry,
+ struct sctp_chunk, list);
+ list_del_init(entry);
+
+ /* Hold the chunk until an ASCONF_ACK is received. */
+ sctp_chunk_hold(asconf);
+ if (sctp_primitive_ASCONF(asoc, asconf))
+ sctp_chunk_free(asconf);
+ else
+ asoc->addip_last_asconf = asconf;
+ }
+}
+
/* These three macros allow us to pull the debugging code out of the
* main flow of sctp_do_sm() to keep attention focused on the real
}
error = sctp_cmd_send_msg(asoc, cmd->obj.msg);
break;
+ case SCTP_CMD_SEND_NEXT_ASCONF:
+ sctp_cmd_send_asconf(asoc);
+ break;
default:
printk(KERN_WARNING "Impossible command: %u, %p\n",
cmd->verb, cmd->obj.ptr);
#include <linux/ipv6.h>
#include <linux/net.h>
#include <linux/inet.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/inet_ecn.h>
#include <linux/skbuff.h>
SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
if (!sctp_process_asconf_ack((struct sctp_association *)asoc,
- asconf_ack))
+ asconf_ack)) {
+ /* Successfully processed ASCONF_ACK. We can
+ * release the next asconf if we have one.
+ */
+ sctp_add_cmd_sf(commands, SCTP_CMD_SEND_NEXT_ASCONF,
+ SCTP_NULL());
return SCTP_DISPOSITION_CONSUME;
+ }
abort = sctp_make_abort(asoc, asconf_ack,
sizeof(sctp_errhdr_t));
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/crypto.h>
+#include <linux/slab.h>
#include <net/ip.h>
#include <net/icmp.h>
sp->hmac = NULL;
SCTP_DBG_OBJCNT_INC(sock);
- percpu_counter_inc(&sctp_sockets_allocated);
/* Set socket backlog limit. */
sk->sk_backlog.limit = sysctl_sctp_rmem[1];
local_bh_disable();
+ percpu_counter_inc(&sctp_sockets_allocated);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1);
local_bh_enable();
/* Release our hold on the endpoint. */
ep = sctp_sk(sk)->ep;
sctp_endpoint_free(ep);
- percpu_counter_dec(&sctp_sockets_allocated);
local_bh_disable();
+ percpu_counter_dec(&sctp_sockets_allocated);
sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
local_bh_enable();
}
goto out;
}
+void sctp_data_ready(struct sock *sk, int len)
+{
+ read_lock_bh(&sk->sk_callback_lock);
+ if (sk_has_sleeper(sk))
+ wake_up_interruptible_sync_poll(sk->sk_sleep, POLLIN |
+ POLLRDNORM | POLLRDBAND);
+ sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
+ read_unlock_bh(&sk->sk_callback_lock);
+}
+
/* If socket sndbuf has changed, wake up all per association waiters. */
void sctp_write_space(struct sock *sk)
{
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
* be incorporated into the next SCTP release.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/random.h>
#include <net/sctp/sctp.h>
* be incorporated into the next SCTP release.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/bitmap.h>
#include <net/sctp/sctp.h>
* be incorporated into the next SCTP release.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <net/sctp/structs.h>
* be incorporated into the next SCTP release.
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/wireless.h>
#include <linux/nsproxy.h>
#include <linux/magic.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
break;
++datagrams;
+ /* MSG_WAITFORONE turns on MSG_DONTWAIT after one packet */
+ if (flags & MSG_WAITFORONE)
+ flags |= MSG_DONTWAIT;
+
if (timeout) {
ktime_get_ts(timeout);
*timeout = timespec_sub(end_time, *timeout);
#include <net/ipv6.h>
#include <linux/sunrpc/clnt.h>
+#include <linux/slab.h>
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
list_for_each_entry_safe(cred, next, &cred_unused, cr_lru) {
/* Enforce a 60 second garbage collection moratorium */
- if (time_in_range_open(cred->cr_expire, expired, jiffies) &&
+ if (time_in_range(cred->cr_expire, expired, jiffies) &&
test_bit(RPCAUTH_CRED_HASHED, &cred->cr_flags) != 0)
continue;
*/
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/sched.h>
rqstp->rq_release_snd_buf = priv_release_snd_buf;
return 0;
out_free:
- for (i--; i >= 0; i--) {
- __free_page(rqstp->rq_enc_pages[i]);
- }
+ rqstp->rq_enc_pages_num = i;
+ priv_release_snd_buf(rqstp);
out:
return -EAGAIN;
}
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/sunrpc/sched.h>
#include <linux/sunrpc/gss_asn1.h>
#include <linux/err.h>
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/scatterlist.h>
#include <linux/crypto.h>
#include <linux/highmem.h>
*/
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/sunrpc/gss_krb5.h>
#include <linux/random.h>
*/
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/sunrpc/gss_krb5.h>
#include <linux/crypto.h>
*/
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/sunrpc/gss_krb5.h>
#include <linux/crypto.h>
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/sunrpc/gss_krb5.h>
#include <linux/random.h>
*/
#include <linux/types.h>
-#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/sunrpc/gss_spkm3.h>
#include <linux/random.h>
*
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/module.h>
#include <linux/pagemap.h>
* Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
*/
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/module.h>
******************************************************************************/
#include <linux/tcp.h>
+#include <linux/slab.h>
#include <linux/sunrpc/xprt.h>
#ifdef RPC_DEBUG
#define RPCDBG_FACILITY RPCDBG_SVCDSP
-void bc_release_request(struct rpc_task *task)
-{
- struct rpc_rqst *req = task->tk_rqstp;
-
- dprintk("RPC: bc_release_request: task= %p\n", task);
-
- /*
- * Release this request only if it's a backchannel
- * preallocated request
- */
- if (!bc_prealloc(req))
- return;
- xprt_free_bc_request(req);
-}
-
/* Empty callback ops */
static const struct rpc_call_ops nfs41_callback_ops = {
};
task = rpc_new_task(&task_setup_data);
if (!task) {
xprt_free_bc_request(req);
+ task = ERR_PTR(-ENOMEM);
goto out;
}
task->tk_rqstp = req;
struct dentry *dentry;
dentry = __rpc_lookup_create(parent, name);
+ if (IS_ERR(dentry))
+ return dentry;
if (dentry->d_inode == NULL)
return dentry;
dput(dentry);
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/ipv6.h>
#include <linux/sunrpc/clnt.h>
#include <linux/compiler.h>
#include <linux/netdevice.h>
+#include <linux/gfp.h>
#include <linux/skbuff.h>
#include <linux/types.h>
#include <linux/pagemap.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/xdr.h>
#include <linux/errno.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/svc_xprt.h>
#include <linux/seq_file.h>
#include <linux/hash.h>
#include <linux/string.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/ipv6.h>
#include <linux/kernel.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/metrics.h>
+#include <linux/sunrpc/bc_xprt.h>
#include "sunrpc.h"
if (req->rq_release_snd_buf)
req->rq_release_snd_buf(req);
- /*
- * Early exit if this is a backchannel preallocated request.
- * There is no need to have it added to the RPC slot list.
- */
- if (is_bc_request)
- return;
-
- memset(req, 0, sizeof(*req)); /* mark unused */
-
dprintk("RPC: %5u release request %p\n", task->tk_pid, req);
+ if (likely(!is_bc_request)) {
+ memset(req, 0, sizeof(*req)); /* mark unused */
- spin_lock(&xprt->reserve_lock);
- list_add(&req->rq_list, &xprt->free);
- rpc_wake_up_next(&xprt->backlog);
- spin_unlock(&xprt->reserve_lock);
+ spin_lock(&xprt->reserve_lock);
+ list_add(&req->rq_list, &xprt->free);
+ rpc_wake_up_next(&xprt->backlog);
+ spin_unlock(&xprt->reserve_lock);
+ } else
+ xprt_free_bc_request(req);
}
/**
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/sysctl.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/debug.h>
#include <linux/sunrpc/rpc_rdma.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <rdma/ib_verbs.h>
#include <rdma/rdma_cm.h>
int ret;
dprintk("svcrdma: Creating RDMA socket\n");
-
+ if (sa->sa_family != AF_INET) {
+ dprintk("svcrdma: Address family %d is not supported.\n", sa->sa_family);
+ return ERR_PTR(-EAFNOSUPPORT);
+ }
cma_xprt = rdma_create_xprt(serv, 1);
if (!cma_xprt)
return ERR_PTR(-ENOMEM);
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/seq_file.h>
#include "xprt_rdma.h"
*/
#include <linux/pci.h> /* for Tavor hack below */
+#include <linux/slab.h>
#include "xprt_rdma.h"
.buf_free = rpc_free,
.send_request = xs_tcp_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
-#if defined(CONFIG_NFS_V4_1)
- .release_request = bc_release_request,
-#endif /* CONFIG_NFS_V4_1 */
.close = xs_tcp_close,
.destroy = xs_destroy,
.print_stats = xs_tcp_print_stats,
#include <linux/netdevice.h>
#include <linux/in.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
/*
#include <net/tipc/tipc_bearer.h>
#include <net/tipc/tipc_msg.h>
#include <linux/netdevice.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#define MAX_ETH_BEARERS 2
#include <linux/socket.h>
#include <linux/errno.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fcntl.h>
+#include <linux/gfp.h>
#include <asm/string.h>
#include <asm/atomic.h>
#include <net/sock.h>
#include <linux/un.h>
#include <linux/net.h>
#include <linux/fs.h>
-#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/file.h>
*/
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/sysctl.h>
#include <net/af_unix.h>
* wimax_msg_send()
*/
#include <linux/device.h>
+#include <linux/slab.h>
#include <net/genetlink.h>
#include <linux/netdevice.h>
#include <linux/wimax.h>
* wimax_rfkill_rm()
*/
#include <linux/device.h>
+#include <linux/gfp.h>
#include <net/genetlink.h>
#include <linux/netdevice.h>
#include <linux/wimax.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/nl80211.h>
#include <linux/debugfs.h>
#include <linux/notifier.h>
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include "core.h"
#include "debugfs.h"
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <net/cfg80211.h>
#include "wext-compat.h"
#include "nl80211.h"
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/nl80211.h>
+#include <linux/slab.h>
#include <linux/wireless.h>
#include <net/cfg80211.h>
#include <net/iw_handler.h>
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
*
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/list.h>
#include <linux/random.h>
#include <linux/nl80211.h>
};
static LIST_HEAD(reg_regdb_search_list);
-static DEFINE_SPINLOCK(reg_regdb_search_lock);
+static DEFINE_MUTEX(reg_regdb_search_mutex);
static void reg_regdb_search(struct work_struct *work)
{
const struct ieee80211_regdomain *curdom, *regdom;
int i, r;
- spin_lock(®_regdb_search_lock);
+ mutex_lock(®_regdb_search_mutex);
while (!list_empty(®_regdb_search_list)) {
request = list_first_entry(®_regdb_search_list,
struct reg_regdb_search_request,
r = reg_copy_regd(®dom, curdom);
if (r)
break;
- spin_unlock(®_regdb_search_lock);
mutex_lock(&cfg80211_mutex);
set_regdom(regdom);
mutex_unlock(&cfg80211_mutex);
- spin_lock(®_regdb_search_lock);
break;
}
}
kfree(request);
}
- spin_unlock(®_regdb_search_lock);
+ mutex_unlock(®_regdb_search_mutex);
}
static DECLARE_WORK(reg_regdb_work, reg_regdb_search);
memcpy(request->alpha2, alpha2, 2);
- spin_lock(®_regdb_search_lock);
+ mutex_lock(®_regdb_search_mutex);
list_add_tail(&request->list, ®_regdb_search_list);
- spin_unlock(®_regdb_search_lock);
+ mutex_unlock(®_regdb_search_mutex);
schedule_work(®_regdb_work);
}
* Copyright 2008 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
*/
#include <linux/bitops.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <net/cfg80211.h>
#include <net/ip.h>
#include "core.h"
#include <linux/nl80211.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
+#include <linux/slab.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
#include "wext-compat.h"
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
+#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/uaccess.h>
#include <net/cfg80211.h>
*
* (As all part of the Linux kernel, this file is GPL)
*/
+#include <linux/slab.h>
#include <linux/wireless.h>
#include <linux/netdevice.h>
#include <net/iw_handler.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
+#include <linux/slab.h>
#include <net/cfg80211.h>
#include "wext-compat.h"
#include "nl80211.h"
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <net/tcp_states.h>
#include <asm/uaccess.h>
};
#endif
+
+int x25_parse_address_block(struct sk_buff *skb,
+ struct x25_address *called_addr,
+ struct x25_address *calling_addr)
+{
+ unsigned char len;
+ int needed;
+ int rc;
+
+ if (skb->len < 1) {
+ /* packet has no address block */
+ rc = 0;
+ goto empty;
+ }
+
+ len = *skb->data;
+ needed = 1 + (len >> 4) + (len & 0x0f);
+
+ if (skb->len < needed) {
+ /* packet is too short to hold the addresses it claims
+ to hold */
+ rc = -1;
+ goto empty;
+ }
+
+ return x25_addr_ntoa(skb->data, called_addr, calling_addr);
+
+empty:
+ *called_addr->x25_addr = 0;
+ *calling_addr->x25_addr = 0;
+
+ return rc;
+}
+
+
int x25_addr_ntoa(unsigned char *p, struct x25_address *called_addr,
struct x25_address *calling_addr)
{
/*
* Queue the unaccepted socket for death
*/
+ skb->sk->sk_state = TCP_LISTEN;
sock_set_flag(skb->sk, SOCK_DEAD);
x25_start_heartbeat(skb->sk);
x25_sk(skb->sk)->state = X25_STATE_0;
x25->facilities.winsize_out = X25_DEFAULT_WINDOW_SIZE;
x25->facilities.pacsize_in = X25_DEFAULT_PACKET_SIZE;
x25->facilities.pacsize_out = X25_DEFAULT_PACKET_SIZE;
- x25->facilities.throughput = X25_DEFAULT_THROUGHPUT;
+ x25->facilities.throughput = 0; /* by default don't negotiate
+ throughput */
x25->facilities.reverse = X25_DEFAULT_REVERSE;
x25->dte_facilities.calling_len = 0;
x25->dte_facilities.called_len = 0;
/*
* Extract the X.25 addresses and convert them to ASCII strings,
* and remove them.
+ *
+ * Address block is mandatory in call request packets
*/
- addr_len = x25_addr_ntoa(skb->data, &source_addr, &dest_addr);
+ addr_len = x25_parse_address_block(skb, &source_addr, &dest_addr);
+ if (addr_len <= 0)
+ goto out_clear_request;
skb_pull(skb, addr_len);
/*
* Get the length of the facilities, skip past them for the moment
* get the call user data because this is needed to determine
* the correct listener
+ *
+ * Facilities length is mandatory in call request packets
*/
+ if (skb->len < 1)
+ goto out_clear_request;
len = skb->data[0] + 1;
+ if (skb->len < len)
+ goto out_clear_request;
skb_pull(skb,len);
/*
if (facilities.winsize_in < 1 ||
facilities.winsize_in > 127)
break;
- if (facilities.throughput < 0x03 ||
- facilities.throughput > 0xDD)
- break;
+ if (facilities.throughput) {
+ int out = facilities.throughput & 0xf0;
+ int in = facilities.throughput & 0x0f;
+ if (!out)
+ facilities.throughput |=
+ X25_DEFAULT_THROUGHPUT << 4;
+ else if (out < 0x30 || out > 0xD0)
+ break;
+ if (!in)
+ facilities.throughput |=
+ X25_DEFAULT_THROUGHPUT;
+ else if (in < 0x03 || in > 0x0D)
+ break;
+ }
if (facilities.reverse &&
(facilities.reverse & 0x81) != 0x81)
break;
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <net/sock.h>
#include <linux/if_arp.h>
#include <net/x25.h>
struct x25_dte_facilities *dte_facs, unsigned long *vc_fac_mask)
{
unsigned char *p = skb->data;
- unsigned int len = *p++;
+ unsigned int len;
*vc_fac_mask = 0;
memset(dte_facs->called_ae, '\0', sizeof(dte_facs->called_ae));
memset(dte_facs->calling_ae, '\0', sizeof(dte_facs->calling_ae));
+ if (skb->len < 1)
+ return 0;
+
+ len = *p++;
+
+ if (len >= skb->len)
+ return -1;
+
while (len > 0) {
switch (*p & X25_FAC_CLASS_MASK) {
case X25_FAC_CLASS_A:
memcpy(new, ours, sizeof(*new));
len = x25_parse_facilities(skb, &theirs, dte, &x25->vc_facil_mask);
+ if (len < 0)
+ return len;
/*
* They want reverse charging, we won't accept it.
new->reverse = theirs.reverse;
if (theirs.throughput) {
- if (theirs.throughput < ours->throughput) {
- SOCK_DEBUG(sk, "X.25: throughput negotiated down\n");
- new->throughput = theirs.throughput;
+ int theirs_in = theirs.throughput & 0x0f;
+ int theirs_out = theirs.throughput & 0xf0;
+ int ours_in = ours->throughput & 0x0f;
+ int ours_out = ours->throughput & 0xf0;
+ if (!ours_in || theirs_in < ours_in) {
+ SOCK_DEBUG(sk, "X.25: inbound throughput negotiated\n");
+ new->throughput = (new->throughput & 0xf0) | theirs_in;
+ }
+ if (!ours_out || theirs_out < ours_out) {
+ SOCK_DEBUG(sk,
+ "X.25: outbound throughput negotiated\n");
+ new->throughput = (new->throughput & 0x0f) | theirs_out;
}
}
*/
#include <linux/if_arp.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/x25.h>
LIST_HEAD(x25_forward_list);
* i-frames.
*/
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/string.h>
static int x25_state1_machine(struct sock *sk, struct sk_buff *skb, int frametype)
{
struct x25_address source_addr, dest_addr;
+ int len;
switch (frametype) {
case X25_CALL_ACCEPTED: {
* Parse the data in the frame.
*/
skb_pull(skb, X25_STD_MIN_LEN);
- skb_pull(skb, x25_addr_ntoa(skb->data, &source_addr, &dest_addr));
- skb_pull(skb,
- x25_parse_facilities(skb, &x25->facilities,
+
+ len = x25_parse_address_block(skb, &source_addr,
+ &dest_addr);
+ if (len > 0)
+ skb_pull(skb, len);
+
+ len = x25_parse_facilities(skb, &x25->facilities,
&x25->dte_facilities,
- &x25->vc_facil_mask));
+ &x25->vc_facil_mask);
+ if (len > 0)
+ skb_pull(skb, len);
/*
* Copy any Call User Data.
*/
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
+#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <asm/uaccess.h>
* needed cleaned seq-number fields.
*/
+#include <linux/slab.h>
#include <linux/socket.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/if_arp.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <net/x25.h>
LIST_HEAD(x25_route_list);
* restriction on response.
*/
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/skbuff.h>
#include <linux/crypto.h>
#include <linux/err.h>
-#include <linux/gfp.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/percpu.h>
+#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/vmalloc.h>
#include <net/ip.h>
#include <linux/netdevice.h>
#include <linux/netfilter.h>
#include <linux/skbuff.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <net/dst.h>
#include <net/xfrm.h>
#include <linux/audit.h>
#include <asm/uaccess.h>
#include <linux/ktime.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/sysctl.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/xfrm.h>
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/sysfs.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
my $file_cnt = @files;
my $lastfile;
- open(my $patch, '<', $file)
+ open(my $patch, "< $file")
or die "$P: Can't open $file: $!\n";
while (<$patch>) {
my $patch_line = $_;
$nested =~ s/\/\*.*?\*\///gos;
# strip kmemcheck_bitfield_{begin,end}.*;
$members =~ s/kmemcheck_bitfield_.*?;//gos;
+ # strip attributes
+ $members =~ s/__aligned\s*\(\d+\)//gos;
create_parameterlist($members, ';', $file);
check_sections($file, $declaration_name, "struct", $sectcheck, $struct_actual, $nested);
$prototype =~ s/^noinline +//;
$prototype =~ s/__devinit +//;
$prototype =~ s/__init +//;
+ $prototype =~ s/__init_or_module +//;
$prototype =~ s/^#\s*define\s+//; #ak added
$prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
#include <linux/list.h>
#include <linux/uaccess.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include <linux/rcupdate.h>
#include <linux/mutex.h>
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
- if (!IS_ERR(dentry)) {
+ if (!IS_ERR(*dentry)) {
if ((mode & S_IFMT) == S_IFDIR)
error = mkdir(parent->d_inode, *dentry, mode);
else
error = create(parent->d_inode, *dentry, mode);
} else
- error = PTR_ERR(dentry);
+ error = PTR_ERR(*dentry);
mutex_unlock(&parent->d_inode->i_mutex);
return error;
* and store_template.
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include "ima.h"
static const char *IMA_TEMPLATE_NAME = "ima";
*/
#include <linux/fs.h>
+#include <linux/gfp.h>
#include <linux/audit.h>
#include "ima.h"
#include <linux/crypto.h>
#include <linux/scatterlist.h>
#include <linux/err.h>
+#include <linux/slab.h>
#include "ima.h"
static int init_desc(struct hash_desc *desc)
* current measurement list and IMA statistics
*/
#include <linux/fcntl.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/rculist.h>
* - cache integrity information associated with an inode
* using a radix tree.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/radix-tree.h>
*/
#include <linux/module.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include "ima.h"
#include <linux/binfmts.h>
#include <linux/mount.h>
#include <linux/mman.h>
+#include <linux/slab.h>
#include "ima.h"
#include <linux/security.h>
#include <linux/magic.h>
#include <linux/parser.h>
+#include <linux/slab.h>
#include "ima.h"
*/
#include <linux/module.h>
#include <linux/rculist.h>
+#include <linux/slab.h>
#include "ima.h"
LIST_HEAD(ima_measurements); /* list of all measurements */
goto dont_gc;
/* scan the keyring looking for dead keys */
- klist = rcu_dereference_check(keyring->payload.subscriptions,
- lockdep_is_held(&key_serial_lock));
+ rcu_read_lock();
+ klist = rcu_dereference(keyring->payload.subscriptions);
if (!klist)
- goto dont_gc;
+ goto unlock_dont_gc;
for (loop = klist->nkeys - 1; loop >= 0; loop--) {
key = klist->keys[loop];
goto do_gc;
}
+unlock_dont_gc:
+ rcu_read_unlock();
dont_gc:
kleave(" = false");
return false;
do_gc:
+ rcu_read_unlock();
key_gc_cursor = keyring->serial;
key_get(keyring);
spin_unlock(&key_serial_lock);
#include <asm/uaccess.h>
#include "internal.h"
+#define rcu_dereference_locked_keyring(keyring) \
+ (rcu_dereference_protected( \
+ (keyring)->payload.subscriptions, \
+ rwsem_is_locked((struct rw_semaphore *)&(keyring)->sem)))
+
/*
* when plumbing the depths of the key tree, this sets a hard limit set on how
* deep we're willing to go
int loop, ret;
ret = 0;
- klist = rcu_dereference(keyring->payload.subscriptions);
-
+ klist = rcu_dereference_locked_keyring(keyring);
if (klist) {
/* calculate how much data we could return */
qty = klist->nkeys * sizeof(key_serial_t);
struct key *keyring;
int bucket;
- keyring = ERR_PTR(-EINVAL);
if (!name)
- goto error;
+ return ERR_PTR(-EINVAL);
bucket = keyring_hash(name);
KEY_SEARCH) < 0)
continue;
- /* we've got a match */
- atomic_inc(&keyring->usage);
- read_unlock(&keyring_name_lock);
- goto error;
+ /* we've got a match but we might end up racing with
+ * key_cleanup() if the keyring is currently 'dead'
+ * (ie. it has a zero usage count) */
+ if (!atomic_inc_not_zero(&keyring->usage))
+ continue;
+ goto out;
}
}
- read_unlock(&keyring_name_lock);
keyring = ERR_PTR(-ENOKEY);
-
- error:
+out:
+ read_unlock(&keyring_name_lock);
return keyring;
} /* end find_keyring_by_name() */
}
/* see if there's a matching key we can displace */
- klist = keyring->payload.subscriptions;
-
+ klist = rcu_dereference_locked_keyring(keyring);
if (klist && klist->nkeys > 0) {
struct key_type *type = key->type;
if (ret < 0)
goto error2;
- klist = keyring->payload.subscriptions;
-
if (klist && klist->nkeys < klist->maxkeys) {
/* there's sufficient slack space to add directly */
atomic_inc(&key->usage);
down_write(&keyring->sem);
- klist = keyring->payload.subscriptions;
+ klist = rcu_dereference_locked_keyring(keyring);
if (klist) {
/* search the keyring for the key */
for (loop = 0; loop < klist->nkeys; loop++)
/* detach the pointer block with the locks held */
down_write(&keyring->sem);
- klist = keyring->payload.subscriptions;
+ klist = rcu_dereference_locked_keyring(keyring);
if (klist) {
/* adjust the quota */
key_payload_reserve(keyring,
*/
static void keyring_revoke(struct key *keyring)
{
- struct keyring_list *klist = keyring->payload.subscriptions;
+ struct keyring_list *klist;
+
+ klist = rcu_dereference_locked_keyring(keyring);
/* adjust the quota */
key_payload_reserve(keyring, 0);
down_write(&keyring->sem);
- klist = keyring->payload.subscriptions;
+ klist = rcu_dereference_locked_keyring(keyring);
if (!klist)
goto no_klist;
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
-#include <linux/slab.h>
#include <linux/keyctl.h>
#include <linux/fs.h>
#include <linux/err.h>
{
const struct cred *cred = current_cred();
key_serial_t prkey, sskey;
- struct key *key = cons->key, *authkey = cons->authkey, *keyring;
+ struct key *key = cons->key, *authkey = cons->authkey, *keyring,
+ *session;
char *argv[9], *envp[3], uid_str[12], gid_str[12];
char key_str[12], keyring_str[3][12];
char desc[20];
}
/* attach the auth key to the session keyring */
- ret = __key_link(keyring, authkey);
+ ret = key_link(keyring, authkey);
if (ret < 0)
goto error_link;
if (cred->tgcred->process_keyring)
prkey = cred->tgcred->process_keyring->serial;
- if (cred->tgcred->session_keyring)
- sskey = rcu_dereference(cred->tgcred->session_keyring)->serial;
- else
- sskey = cred->user->session_keyring->serial;
+ rcu_read_lock();
+ session = rcu_dereference(cred->tgcred->session_keyring);
+ if (!session)
+ session = cred->user->session_keyring;
+ sskey = session->serial;
+ rcu_read_unlock();
sprintf(keyring_str[2], "%d", sskey);
key_already_present:
mutex_unlock(&key_construction_mutex);
- if (dest_keyring)
+ if (dest_keyring) {
+ __key_link(dest_keyring, key_ref_to_ptr(key_ref));
up_write(&dest_keyring->sem);
+ }
mutex_unlock(&user->cons_lock);
key_put(key);
*_key = key = key_ref_to_ptr(key_ref);
if (!IS_ERR(key_ref)) {
key = key_ref_to_ptr(key_ref);
+ if (dest_keyring) {
+ construct_get_dest_keyring(&dest_keyring);
+ key_link(dest_keyring, key);
+ key_put(dest_keyring);
+ }
} else if (PTR_ERR(key_ref) != -EAGAIN) {
key = ERR_CAST(key_ref);
} else {
struct user_key_payload *upayload;
long ret;
- upayload = rcu_dereference(key->payload.data);
+ upayload = rcu_dereference_protected(
+ key->payload.data, rwsem_is_locked(&((struct key *)key)->sem));
ret = upayload->datalen;
/* we can return the data as is */
#include <linux/types.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
+#include <linux/gfp.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <net/sock.h>
*/
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/rcupdate.h>
+#include <linux/gfp.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <net/sock.h>
*/
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/types.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/in.h>
#include <linux/in6.h>
void avtab_cache_init(void);
void avtab_cache_destroy(void);
-#define MAX_AVTAB_HASH_BITS 13
+#define MAX_AVTAB_HASH_BITS 11
#define MAX_AVTAB_HASH_BUCKETS (1 << MAX_AVTAB_HASH_BITS)
#define MAX_AVTAB_HASH_MASK (MAX_AVTAB_HASH_BUCKETS-1)
#define MAX_AVTAB_SIZE MAX_AVTAB_HASH_BUCKETS
* Author : Stephen Smalley, <sds@epoch.ncsc.mil>
*/
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/string.h>
#include <linux/errno.h>
#include "symtab.h"
#include <linux/netfilter.h>
#include <linux/netfilter_ipv4.h>
#include <linux/netfilter_ipv6.h>
+#include <linux/slab.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/skbuff.h>
*/
#include <linux/types.h>
+#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/sched.h>
#include "smack.h"
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/pipe_fs_i.h>
#include <net/netlabel.h>
#include <linux/vmalloc.h>
#include <linux/security.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <net/net_namespace.h>
#include <net/netlabel.h>
#include <net/cipso_ipv4.h>
*/
#include <linux/uaccess.h>
+#include <linux/slab.h>
#include <linux/security.h>
#include <linux/hardirq.h>
#include "common.h"
#include "common.h"
#include <linux/binfmts.h>
+#include <linux/slab.h>
/* Variables definitions.*/
*/
#include "common.h"
+#include <linux/slab.h>
/* Keyword array for single path operations. */
static const char *tomoyo_path_keyword[TOMOYO_MAX_PATH_OPERATION] = {
#include "common.h"
#include <linux/kthread.h>
+#include <linux/slab.h>
enum tomoyo_gc_id {
TOMOYO_ID_DOMAIN_INITIALIZER,
#include <linux/fs_struct.h>
#include <linux/hash.h>
#include <linux/magic.h>
+#include <linux/slab.h>
#include "common.h"
/**
*/
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
MODULE_LICENSE("GPL");
*/
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/slab.h>
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("toonie codec driver for snd-aoa");
* GPL v2, can be found in COPYING.
*/
+#include <linux/slab.h>
#include <asm/pmac_feature.h>
#include <asm/pmac_pfunc.h>
#include "../aoa.h"
#include <asm/prom.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include "../aoa.h"
#include "../soundbus/soundbus.h"
#include <linux/kernel.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <asm/prom.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <asm/macio.h>
#include <linux/pci.h>
struct snd_ac97 *ac97;
int ret;
- writel(0, aaci->base + AC97_POWERDOWN);
/*
* Assert AACIRESET for 2us
*/
writel(0x1fff, aaci->base + AACI_INTCLR);
writel(aaci->maincr, aaci->base + AACI_MAINCR);
-
+ /*
+ * Fix: ac97 read back fail errors by reading
+ * from any arbitrary aaci register.
+ */
+ readl(aaci->base + AACI_CSCH1);
ret = aaci_probe_ac97(aaci);
if (ret)
goto out;
* published by the Free Software Foundation.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
if (!rtd->dma_desc_array)
goto err1;
+ rtd->dma_ch = -1;
runtime->private_data = rtd;
return 0;
/* this file included from control.c */
#include <linux/compat.h>
+#include <linux/slab.h>
struct snd_ctl_elem_list32 {
u32 offset;
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/hrtimer.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/string.h>
#include <sound/core.h>
*/
#include <linux/input.h>
+#include <linux/slab.h>
#include <sound/jack.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/time.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <sound/core.h>
*
*/
-#include <linux/slab.h>
#include <linux/time.h>
#include <sound/core.h>
#include <sound/pcm.h>
/* This file included from pcm_native.c */
#include <linux/compat.h>
+#include <linux/slab.h>
static int snd_pcm_ioctl_delay_compat(struct snd_pcm_substream *substream,
s32 __user *src)
#define xrun_debug(substream, mask) \
((substream)->pstr->xrun_debug & (mask))
+#else
+#define xrun_debug(substream, mask) 0
+#endif
#define dump_stack_on_xrun(substream) do { \
if (xrun_debug(substream, XRUN_DEBUG_STACK)) \
}
}
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
#define hw_ptr_error(substream, fmt, args...) \
do { \
if (xrun_debug(substream, XRUN_DEBUG_BASIC)) { \
#else /* ! CONFIG_SND_PCM_XRUN_DEBUG */
-#define xrun_debug(substream, mask) 0
-#define xrun(substream) do { } while (0)
#define hw_ptr_error(substream, fmt, args...) do { } while (0)
#define xrun_log(substream, pos) do { } while (0)
#define xrun_log_show(substream) do { } while (0)
#include <asm/io.h>
#include <linux/time.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <sound/core.h>
#include "seq_oss_event.h"
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
/*
* common variables
#include <sound/seq_midi_event.h>
#include "../seq_lock.h"
#include <linux/init.h>
+#include <linux/slab.h>
/*
#include <sound/seq_oss_legacy.h>
#include "../seq_lock.h"
#include <linux/wait.h>
+#include <linux/slab.h>
/*
* constants
#include "seq_oss_midi.h"
#include "../seq_lock.h"
#include <linux/init.h>
+#include <linux/slab.h>
/*
* constants
#include "seq_oss_timer.h"
#include "seq_oss_event.h"
#include <sound/seq_oss_legacy.h>
+#include <linux/slab.h>
/*
*/
#include "../seq_lock.h"
#include "../seq_clientmgr.h"
#include <linux/wait.h>
+#include <linux/slab.h>
/*
/* This file included from seq.c */
#include <linux/compat.h>
+#include <linux/slab.h>
struct snd_seq_port_info32 {
struct snd_seq_addr addr; /* client/port numbers */
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include "seq_system.h"
#include "seq_timer.h"
{
struct snd_timer_user *tu = timeri->callback_data;
struct snd_timer_tread r1;
+ unsigned long flags;
if (event >= SNDRV_TIMER_EVENT_START &&
event <= SNDRV_TIMER_EVENT_PAUSE)
r1.event = event;
r1.tstamp = *tstamp;
r1.val = resolution;
- spin_lock(&tu->qlock);
+ spin_lock_irqsave(&tu->qlock, flags);
snd_timer_user_append_to_tqueue(tu, &r1);
- spin_unlock(&tu->qlock);
+ spin_unlock_irqrestore(&tu->qlock, flags);
kill_fasync(&tu->fasync, SIGIO, POLL_IN);
wake_up(&tu->qchange_sleep);
}
#include <linux/platform_device.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/parport.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/rawmidi.h>
*/
#include "opl3_voice.h"
-#include <linux/slab.h>
static int snd_opl3_open_seq_oss(struct snd_seq_oss_arg *arg, void *closure);
static int snd_opl3_close_seq_oss(struct snd_seq_oss_arg *arg);
*
*/
+#include <linux/slab.h>
#include <sound/opl3.h>
#include <sound/asound_fm.h>
#include "opl4_local.h"
#include <sound/initval.h>
#include <linux/ioport.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <asm/io.h>
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
#include <sound/pcm.h>
#include <linux/parport.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/rawmidi.h>
#include <linux/device.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <sound/core.h>
#include <sound/hwdep.h>
}
int snd_ak4113_create(struct snd_card *card, ak4113_read_t *read,
- ak4113_write_t *write, const unsigned char pgm[5],
+ ak4113_write_t *write, const unsigned char *pgm,
void *private_data, struct ak4113 **r_ak4113)
{
struct ak4113 *chip;
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/version.h>
#include <sound/core.h>
#include <sound/tea575x-tuner.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/isa.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/isa.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/isa.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/isapnp.h>
#include <linux/moduleparam.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <asm/dma.h>
*/
#include <linux/io.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/isa.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/isa.h>
#include <linux/pnp.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <asm/io.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/moduleparam.h>
#include <asm/io.h>
#include "emu8000_local.h"
#include <linux/init.h>
+#include <linux/slab.h>
#include <sound/initval.h>
#include <sound/pcm.h>
return err;
}
port[dev] = pnp_port_start(pdev, 0);
- dma8[dev] = pnp_dma(pdev, 1);
+ dma8[dev] = pnp_dma(pdev, 0);
irq[dev] = pnp_irq(pdev, 0);
return 0;
#include <asm/dma.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/isa.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/err.h>
#include <linux/isa.h>
#include <linux/pnp.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <linux/firmware.h>
#include <sound/core.h>
#include <sound/snd_wavefront.h>
#include <linux/wait.h>
#include <linux/firmware.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/snd_wavefront.h>
#include <sound/initval.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ip22.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
-#include <linux/gfp.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/ip32/ip32_ints.h>
#include <asm/ip32/mace.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/stddef.h>
+#include <linux/slab.h>
#include <linux/isapnp.h>
#include <linux/pnp.h>
#include <linux/spinlock.h>
#define SAMPLE_ROUNDUP 0
#include <linux/mm.h>
+#include <linux/gfp.h>
#include "sound_config.h"
#define DMAP_FREE_ON_CLOSE 0
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include "sound_config.h"
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/slab.h>
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/smp_lock.h>
+#include <linux/gfp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include "sound_config.h"
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include "sound_config.h"
#include "sb_mixer.h"
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include "sound_config.h"
#include "sound_firmware.h"
*/
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include "sound_config.h"
* Stanislav Voronyi <stas@esc.kharkov.com> : Support for AWE 3DSE device (Jun 7 1999)
*/
+#include <linux/slab.h>
+
#include "sound_config.h"
#define __SB_MIXER_C__
#include <asm/dma.h>
#include <asm/io.h>
#include <linux/wait.h>
-#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/major.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include "sound_config.h"
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
#include "sound_config.h"
* We currently support a mixer device, but it is currently non-functional.
*/
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kernel.h>
struct audio_operations *adev = audio_devs[dev];
if (enable_bits & PCM_ENABLE_OUTPUT) {
- if (!(adev->flags & DMA_ACTIVE)) {
+ if (!(adev->dmap_out->flags & DMA_ACTIVE)) {
unsigned long flags;
local_irq_save(flags);
/* prevent recusion */
- adev->flags |= DMA_ACTIVE;
+ adev->dmap_out->flags |= DMA_ACTIVE;
dma_interrupt = vidc_audio_dma_interrupt;
vidc_sound_dma_irq(0, NULL);
#include <linux/wait.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/visws/cobalt.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
0x10140523, /* Thinkpad R40 */
0x10140534, /* Thinkpad X31 */
0x10140537, /* Thinkpad T41p */
+ 0x1014053e, /* Thinkpad R40e */
0x10140554, /* Thinkpad T42p/R50p */
0x10140567, /* Thinkpad T43p 2668-G7U */
0x10140581, /* Thinkpad X41-2527 */
0x10280160, /* Dell Dimension 2400 */
0x104380b0, /* Asus A7V8X-MX */
0x11790241, /* Toshiba Satellite A-15 S127 */
+ 0x1179ff10, /* Toshiba P500 */
0x144dc01a, /* Samsung NP-X20C004/SEG */
0 /* end */
};
*
*/
-#include <linux/slab.h>
#include <linux/mutex.h>
#include <sound/core.h>
#include <asm/io.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/gameport.h>
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/system.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <sound/initval.h>
struct snd_pcm_substream *substream)
{
size_t ptr;
- unsigned int reg;
+ unsigned int reg, rem, tries;
+
if (!rec->running)
return 0;
#if 1 // this seems better..
reg = rec->ch ? CM_REG_CH1_FRAME2 : CM_REG_CH0_FRAME2;
- ptr = rec->dma_size - (snd_cmipci_read_w(cm, reg) + 1);
- ptr >>= rec->shift;
+ for (tries = 0; tries < 3; tries++) {
+ rem = snd_cmipci_read_w(cm, reg);
+ if (rem < rec->dma_size)
+ goto ok;
+ }
+ printk(KERN_ERR "cmipci: invalid PCM pointer: %#x\n", rem);
+ return SNDRV_PCM_POS_XRUN;
+ok:
+ ptr = (rec->dma_size - (rem + 1)) >> rec->shift;
#else
reg = rec->ch ? CM_REG_CH1_FRAME1 : CM_REG_CH0_FRAME1;
ptr = snd_cmipci_read(cm, reg) - rec->offset;
#include <linux/delay.h>
#include <linux/moduleparam.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/sb.h>
#include <sound/initval.h>
*/
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <sound/core.h>
#include <sound/control.h>
*/
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <sound/core.h>
#include "ctdaio.h"
#include "cttimer.h"
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/pcm.h>
#include <sound/control.h>
#include <sound/asoundef.h>
#include "ctpcm.h"
#include "cttimer.h"
+#include <linux/slab.h>
#include <sound/pcm.h>
/* Hardware descriptions for playback */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
goto ctl_error;
#endif
- if ((err = snd_card_register(card)) < 0) {
- snd_card_free(card);
+ err = snd_card_register(card);
+ if (err < 0)
goto ctl_error;
- }
snd_printk(KERN_INFO "Card registered: %s\n", card->longname);
pci_set_drvdata(pci, chip);
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/firmware.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include <sound/control.h>
*/
#include <linux/pci.h>
+#include <linux/gfp.h>
#include <linux/time.h>
#include <linux/mutex.h>
#include <linux/input.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <linux/workqueue.h>
#include <sound/core.h>
#include "hda_beep.h"
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <asm/unaligned.h>
#include "hda_codec.h"
#include <asm/io.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <sound/core.h>
#include "ice1712.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <sound/core.h>
#include "ice1712.h"
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <sound/core.h>
#include "ice1712.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/initval.h>
#include <sound/control.h>
struct snd_kcontrol *master_switch;
struct snd_kcontrol *master_volume;
struct tasklet_struct hwvol_tq;
+ unsigned int in_suspend;
#ifdef CONFIG_PM
u16 *suspend_mem;
MODULE_DEVICE_TABLE(pci, snd_m3_ids);
static struct snd_pci_quirk m3_amp_quirk_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x0E11, 0x0094, "Compaq Evo N600c", 0x0c),
SND_PCI_QUIRK(0x10f7, 0x833e, "Panasonic CF-28", 0x0d),
SND_PCI_QUIRK(0x10f7, 0x833d, "Panasonic CF-72", 0x0d),
SND_PCI_QUIRK(0x1033, 0x80f1, "NEC LM800J/7", 0x03),
outb(0x88, chip->iobase + SHADOW_MIX_REG_MASTER);
outb(0x88, chip->iobase + HW_VOL_COUNTER_MASTER);
+ /* Ignore spurious HV interrupts during suspend / resume, this avoids
+ mistaking them for a mute button press. */
+ if (chip->in_suspend)
+ return;
+
if (!chip->master_switch || !chip->master_volume)
return;
if (chip->suspend_mem == NULL)
return 0;
+ chip->in_suspend = 1;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
snd_pcm_suspend_all(chip->pcm);
snd_ac97_suspend(chip->ac97);
snd_m3_hv_init(chip);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ chip->in_suspend = 0;
return 0;
}
#endif /* CONFIG_PM */
#include <linux/dma-mapping.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
unsigned long count, unsigned long pos)
{
struct mixart_mgr *mgr = entry->private_data;
+ unsigned long maxsize;
- count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
- if(count <= 0)
+ if (pos >= MIXART_BA0_SIZE)
return 0;
- if(pos + count > MIXART_BA0_SIZE)
- count = (long)(MIXART_BA0_SIZE - pos);
- if(copy_to_user_fromio(buf, MIXART_MEM( mgr, pos ), count))
+ maxsize = MIXART_BA0_SIZE - pos;
+ if (count > maxsize)
+ count = maxsize;
+ count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
+ if (copy_to_user_fromio(buf, MIXART_MEM(mgr, pos), count))
return -EFAULT;
return count;
}
unsigned long count, unsigned long pos)
{
struct mixart_mgr *mgr = entry->private_data;
+ unsigned long maxsize;
- count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
- if(count <= 0)
+ if (pos > MIXART_BA1_SIZE)
return 0;
- if(pos + count > MIXART_BA1_SIZE)
- count = (long)(MIXART_BA1_SIZE - pos);
- if(copy_to_user_fromio(buf, MIXART_REG( mgr, pos ), count))
+ maxsize = MIXART_BA1_SIZE - pos;
+ if (count > maxsize)
+ count = maxsize;
+ count = count & ~3; /* make sure the read size is a multiple of 4 bytes */
+ if (copy_to_user_fromio(buf, MIXART_REG(mgr, pos), count))
return -EFAULT;
return count;
}
#include <linux/pci.h>
#include <linux/firmware.h>
#include <linux/vmalloc.h>
+#include <linux/slab.h>
#include <asm/io.h>
#include <sound/core.h>
#include "mixart.h"
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/pci.h>
+#include <linux/slab.h>
#include <sound/ac97_codec.h>
#include <sound/asoundef.h>
#include <sound/core.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/firmware.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
-#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <sound/core.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/time.h>
+#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
*/
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/info.h>
#include "pdaudiocf.h"
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/slab.h>
#include <linux/delay.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include "vxpocket.h"
#include <pcmcia/ciscode.h>
#include <asm/io.h>
#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <sound/core.h>
#include "pmac.h"
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
-#include <linux/slab.h>
#include <sound/core.h>
#include "pmac.h"
#include <linux/dma-mapping.h>
#include <linux/dmapool.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/slab.h>
#include <sound/asound.h>
#include <sound/control.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
runtime->dma_bytes = params_buffer_bytes(params);
- prtd->params = rtd->dai->cpu_dai->dma_data;
+ prtd->params = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
prtd->dma_buffer = runtime->dma_addr;
ssc_p->dma_params[dir] = dma_params;
/*
- * The cpu_dai->dma_data field is only used to communicate the
- * appropriate DMA parameters to the pcm driver hw_params()
+ * The snd_soc_pcm_stream->dma_data field is only used to communicate
+ * the appropriate DMA parameters to the pcm driver hw_params()
* function. It should not be used for other purposes
* as it is common to all substreams.
*/
- rtd->dai->cpu_dai->dma_data = dma_params;
+ snd_soc_dai_set_dma_data(rtd->dai->cpu_dai, substream, dma_params);
channels = params_channels(params);
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/suspend.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <sound/core.h>
static int ac97_soc_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = socdev->card;
struct snd_soc_codec *codec;
struct snd_ac97_bus *ac97_bus;
struct snd_ac97_template ac97_template;
+ int i;
int ret = 0;
printk(KERN_INFO "AC97 SoC Audio Codec %s\n", AC97_VERSION);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
- ret = snd_soc_new_ac97_codec(codec, &soc_ac97_ops, 0);
- if (ret < 0) {
- printk(KERN_ERR "ASoC: failed to init gen ac97 glue\n");
- goto err;
- }
-
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0)
if (ret < 0)
goto bus_err;
+ for (i = 0; i < card->num_links; i++) {
+ if (card->dai_link[i].codec_dai->ac97_control) {
+ snd_ac97_dev_add_pdata(codec->ac97,
+ card->dai_link[i].cpu_dai->ac97_pdata);
+ }
+ }
+
return 0;
bus_err:
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
*/
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/device.h>
#include <sound/core.h>
*/
#include <linux/module.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/soc.h>
#include <sound/initval.h>
*/
#include <linux/tty.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/gpio.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/device.h>
#include <sound/core.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/device.h>
#include <linux/sysfs.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
if (dac33->fifo_mode) {
/* Generic for all FIFO modes */
/* 50-51 : ASRC Control registers */
- dac33_write(codec, DAC33_ASRC_CTRL_A, (1 << 4)); /* div=2 */
+ dac33_write(codec, DAC33_ASRC_CTRL_A, DAC33_SRCLKDIV(1));
dac33_write(codec, DAC33_ASRC_CTRL_B, 1); /* ??? */
/* Write registers 0x34 and 0x35 (MSB, LSB) */
case SND_SOC_DAIFMT_DSP_A:
aictrl_a |= DAC33_AFMT_DSP;
aictrl_b &= ~DAC33_DATA_DELAY_MASK;
- aictrl_b |= DAC33_DATA_DELAY(1); /* 1 bit delay */
- break;
- case SND_SOC_DAIFMT_DSP_B:
- aictrl_a |= DAC33_AFMT_DSP;
- aictrl_b &= ~DAC33_DATA_DELAY_MASK; /* No delay */
+ aictrl_b |= DAC33_DATA_DELAY(0);
break;
case SND_SOC_DAIFMT_RIGHT_J:
aictrl_a |= DAC33_AFMT_RIGHT_J;
{
/* 44-46: DAC Control Registers */
/* A : DAC sample rate Fsref/1.5 */
- dac33_write(codec, DAC33_DAC_CTRL_A, DAC33_DACRATE(1));
+ dac33_write(codec, DAC33_DAC_CTRL_A, DAC33_DACRATE(0));
/* B : DAC src=normal, not muted */
dac33_write(codec, DAC33_DAC_CTRL_B, DAC33_DACSRCR_RIGHT |
DAC33_DACSRCL_LEFT);
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/tpa6130a2-plat.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
break;
case SND_SOC_BIAS_OFF:
- /* Switch over to startup biases */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK,
- WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- (1 << WM8994_VMID_RAMP_SHIFT));
-
- /* Disable main biases */
- snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
- WM8994_BIAS_ENA | WM8994_VMID_SEL_MASK, 0);
+ if (codec->bias_level == SND_SOC_BIAS_STANDBY) {
+ /* Switch over to startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ (1 << WM8994_VMID_RAMP_SHIFT));
- /* Discharge line */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
- WM8994_LINEOUT1_DISCH |
- WM8994_LINEOUT2_DISCH,
- WM8994_LINEOUT1_DISCH |
- WM8994_LINEOUT2_DISCH);
+ /* Disable main biases */
+ snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_1,
+ WM8994_BIAS_ENA |
+ WM8994_VMID_SEL_MASK, 0);
- msleep(5);
+ /* Discharge line */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_1,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH,
+ WM8994_LINEOUT1_DISCH |
+ WM8994_LINEOUT2_DISCH);
- /* Switch off startup biases */
- snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
- WM8994_BIAS_SRC | WM8994_STARTUP_BIAS_ENA |
- WM8994_VMID_BUF_ENA |
- WM8994_VMID_RAMP_MASK, 0);
+ msleep(5);
+ /* Switch off startup biases */
+ snd_soc_update_bits(codec, WM8994_ANTIPOP_2,
+ WM8994_BIAS_SRC |
+ WM8994_STARTUP_BIAS_ENA |
+ WM8994_VMID_BUF_ENA |
+ WM8994_VMID_RAMP_MASK, 0);
+ }
break;
}
codec->bias_level = level;
.rates = WM8994_RATES,
.formats = WM8994_FORMATS,
},
- .playback = {
+ .capture = {
.stream_name = "AIF3 Capture",
.channels_min = 2,
.channels_max = 2,
case 3:
wm8994->hubs.dcs_codes = -5;
wm8994->hubs.hp_startup_mode = 1;
+ wm8994->hubs.dcs_readback_mode = 1;
break;
default:
+ wm8994->hubs.dcs_readback_mode = 1;
break;
}
-
/* Remember if AIFnLRCLK is configured as a GPIO. This should be
* configured on init - if a system wants to do this dynamically
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
*/
#include <linux/init.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/device.h>
#include <sound/core.h>
static const struct soc_enum speaker_mode =
SOC_ENUM_SINGLE(WM8993_SPKMIXR_ATTENUATION, 8, 2, speaker_mode_text);
-static void wait_for_dc_servo(struct snd_soc_codec *codec)
+static void wait_for_dc_servo(struct snd_soc_codec *codec, unsigned int op)
{
unsigned int reg;
int count = 0;
+ unsigned int val;
+
+ val = op | WM8993_DCS_ENA_CHAN_0 | WM8993_DCS_ENA_CHAN_1;
+
+ /* Trigger the command */
+ snd_soc_write(codec, WM8993_DC_SERVO_0, val);
dev_dbg(codec->dev, "Waiting for DC servo...\n");
do {
count++;
msleep(1);
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_0);
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_0);
dev_dbg(codec->dev, "DC servo: %x\n", reg);
- } while (reg & WM8993_DCS_DATAPATH_BUSY);
+ } while (reg & op && count < 400);
- if (reg & WM8993_DCS_DATAPATH_BUSY)
+ if (reg & op)
dev_err(codec->dev, "Timed out waiting for DC Servo\n");
}
static void calibrate_dc_servo(struct snd_soc_codec *codec)
{
struct wm_hubs_data *hubs = codec->private_data;
- u16 reg, dcs_cfg;
+ u16 reg, reg_l, reg_r, dcs_cfg;
/* Set for 32 series updates */
snd_soc_update_bits(codec, WM8993_DC_SERVO_1,
WM8993_DCS_SERIES_NO_01_MASK,
32 << WM8993_DCS_SERIES_NO_01_SHIFT);
-
- /* Enable the DC servo. Write all bits to avoid triggering startup
- * or write calibration.
- */
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- 0xFFFF,
- WM8993_DCS_ENA_CHAN_0 |
- WM8993_DCS_ENA_CHAN_1 |
- WM8993_DCS_TRIG_SERIES_1 |
- WM8993_DCS_TRIG_SERIES_0);
-
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_SERIES_0 | WM8993_DCS_TRIG_SERIES_1);
/* Apply correction to DC servo result */
if (hubs->dcs_codes) {
dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
hubs->dcs_codes);
+ /* Different chips in the family support different
+ * readback methods.
+ */
+ switch (hubs->dcs_readback_mode) {
+ case 0:
+ reg_l = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1)
+ & WM8993_DCS_INTEG_CHAN_0_MASK;;
+ reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
+ & WM8993_DCS_INTEG_CHAN_1_MASK;
+ break;
+ case 1:
+ reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+ reg_l = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
+ >> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+ reg_r = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
+ break;
+ default:
+ WARN(1, "Unknown DCS readback method");
+ break;
+ }
+
/* HPOUT1L */
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_1) &
- WM8993_DCS_INTEG_CHAN_0_MASK;;
- reg += hubs->dcs_codes;
- dcs_cfg = reg << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
+ if (reg_l + hubs->dcs_codes > 0 &&
+ reg_l + hubs->dcs_codes < 0xff)
+ reg_l += hubs->dcs_codes;
+ dcs_cfg = reg_l << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
/* HPOUT1R */
- reg = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) &
- WM8993_DCS_INTEG_CHAN_1_MASK;
- reg += hubs->dcs_codes;
- dcs_cfg |= reg;
+ if (reg_r + hubs->dcs_codes > 0 &&
+ reg_r + hubs->dcs_codes < 0xff)
+ reg_r += hubs->dcs_codes;
+ dcs_cfg |= reg_r;
/* Do it */
snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
- snd_soc_update_bits(codec, WM8993_DC_SERVO_0,
- WM8993_DCS_TRIG_DAC_WR_0 |
- WM8993_DCS_TRIG_DAC_WR_1,
- WM8993_DCS_TRIG_DAC_WR_0 |
- WM8993_DCS_TRIG_DAC_WR_1);
-
- wait_for_dc_servo(codec);
+ wait_for_dc_servo(codec,
+ WM8993_DCS_TRIG_DAC_WR_0 |
+ WM8993_DCS_TRIG_DAC_WR_1);
}
}
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm_hubs_data *hubs = codec->private_data;
int ret;
ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ /* If we're applying an offset correction then updating the
+ * callibration would be likely to introduce further offsets. */
+ if (hubs->dcs_codes)
+ return ret;
+
/* Only need to do this if the outputs are active */
if (snd_soc_read(codec, WM8993_POWER_MANAGEMENT_1)
& (WM8993_HPOUT1L_ENA | WM8993_HPOUT1R_ENA))
/* This *must* be the first element of the codec->private_data struct */
struct wm_hubs_data {
int dcs_codes;
+ int dcs_readback_mode;
int hp_startup_mode;
};
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/clk.h>
dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
davinci_i2s_dai.private_data = dev;
- davinci_i2s_dai.dma_data = dev->dma_params;
+ davinci_i2s_dai.capture.dma_data = dev->dma_params;
+ davinci_i2s_dai.playback.dma_data = dev->dma_params;
ret = snd_soc_register_dai(&davinci_i2s_dai);
if (ret != 0)
goto err_free_mem;
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/clk.h>
dma_data->channel = res->start;
davinci_mcasp_dai[pdata->op_mode].private_data = dev;
- davinci_mcasp_dai[pdata->op_mode].dma_data = dev->dma_params;
+ davinci_mcasp_dai[pdata->op_mode].capture.dma_data = dev->dma_params;
+ davinci_mcasp_dai[pdata->op_mode].playback.dma_data = dev->dma_params;
davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
struct snd_pcm_hardware *ppcm;
int ret = 0;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_pcm_dma_params *pa = rtd->dai->cpu_dai->dma_data;
+ struct davinci_pcm_dma_params *pa;
struct davinci_pcm_dma_params *params;
+
+ pa = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
if (!pa)
return -ENODEV;
params = &pa[substream->stream];
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <linux/module.h>
#include <linux/of_device.h>
+#include <linux/slab.h>
#include <sound/soc.h>
* express or implied.
*/
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/of_device.h>
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
config SND_IMX_SOC
tristate "SoC Audio for Freescale i.MX CPUs"
- depends on ARCH_MXC && BROKEN
+ depends on ARCH_MXC
select SND_PCM
select FIQ
select SND_SOC_AC97_BUS
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
static void snd_imx_dma_err_callback(int channel, void *data, int err)
{
- pr_err("DMA error callback called\n");
+ struct snd_pcm_substream *substream = data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+ int ret;
pr_err("DMA timeout on channel %d -%s%s%s%s\n",
channel,
err & IMX_DMA_ERR_REQUEST ? " request" : "",
err & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
err & IMX_DMA_ERR_BUFFER ? " buffer" : "");
+
+ imx_dma_disable(iprtd->dma);
+ ret = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
+ IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+ DMA_MODE_WRITE : DMA_MODE_READ);
+ if (!ret)
+ imx_dma_enable(iprtd->dma);
}
static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
+ struct imx_pcm_dma_params *dma_params;
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
int ret;
+ dma_params = snd_soc_get_dma_data(rtd->dai->cpu_dai, substream);
+
iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
if (iprtd->dma < 0) {
pr_err("Failed to claim the audio DMA\n");
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct imx_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
+ struct imx_pcm_dma_params *dma_params;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
int err;
+ dma_params = snd_soc_get_dma_data(rtd->dai->cpu_dai, substream);
+
iprtd->substream = substream;
iprtd->buf = (unsigned int *)substream->dma_buffer.area;
iprtd->period_cnt = 0;
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
unsigned long offset;
unsigned long last_offset;
unsigned long size;
- struct timer_list timer;
- int poll_time;
+ struct hrtimer hrt;
+ int poll_time_ns;
+ struct snd_pcm_substream *substream;
+ atomic_t running;
};
-static inline void imx_ssi_set_next_poll(struct imx_pcm_runtime_data *iprtd)
+static enum hrtimer_restart snd_hrtimer_callback(struct hrtimer *hrt)
{
- iprtd->timer.expires = jiffies + iprtd->poll_time;
-}
-
-static void imx_ssi_timer_callback(unsigned long data)
-{
- struct snd_pcm_substream *substream = (void *)data;
+ struct imx_pcm_runtime_data *iprtd =
+ container_of(hrt, struct imx_pcm_runtime_data, hrt);
+ struct snd_pcm_substream *substream = iprtd->substream;
struct snd_pcm_runtime *runtime = substream->runtime;
- struct imx_pcm_runtime_data *iprtd = runtime->private_data;
struct pt_regs regs;
unsigned long delta;
+ if (!atomic_read(&iprtd->running))
+ return HRTIMER_NORESTART;
+
get_fiq_regs(®s);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
/* If we've transferred at least a period then report it and
* reset our poll time */
- if (delta >= runtime->period_size) {
+ if (delta >= iprtd->period) {
snd_pcm_period_elapsed(substream);
iprtd->last_offset = iprtd->offset;
-
- imx_ssi_set_next_poll(iprtd);
}
- /* Restart the timer; if we didn't report we'll run on the next tick */
- add_timer(&iprtd->timer);
+ hrtimer_forward_now(hrt, ns_to_ktime(iprtd->poll_time_ns));
+ return HRTIMER_RESTART;
}
static struct fiq_handler fh = {
iprtd->period = params_period_bytes(params) ;
iprtd->offset = 0;
iprtd->last_offset = 0;
- iprtd->poll_time = HZ / (params_rate(params) / params_period_size(params));
-
+ iprtd->poll_time_ns = 1000000000 / params_rate(params) *
+ params_period_size(params);
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
return 0;
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- imx_ssi_set_next_poll(iprtd);
- add_timer(&iprtd->timer);
+ atomic_set(&iprtd->running, 1);
+ hrtimer_start(&iprtd->hrt, ns_to_ktime(iprtd->poll_time_ns),
+ HRTIMER_MODE_REL);
if (++fiq_enable == 1)
enable_fiq(imx_pcm_fiq);
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- del_timer(&iprtd->timer);
+ atomic_set(&iprtd->running, 0);
+
if (--fiq_enable == 0)
disable_fiq(imx_pcm_fiq);
-
break;
default:
return -EINVAL;
.buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
.period_bytes_min = 128,
.period_bytes_max = 16 * 1024,
- .periods_min = 2,
+ .periods_min = 4,
.periods_max = 255,
.fifo_size = 0,
};
iprtd = kzalloc(sizeof(*iprtd), GFP_KERNEL);
runtime->private_data = iprtd;
- init_timer(&iprtd->timer);
- iprtd->timer.data = (unsigned long)substream;
- iprtd->timer.function = imx_ssi_timer_callback;
+ iprtd->substream = substream;
+
+ atomic_set(&iprtd->running, 0);
+ hrtimer_init(&iprtd->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ iprtd->hrt.function = snd_hrtimer_callback;
ret = snd_pcm_hw_constraint_integer(substream->runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
struct snd_pcm_runtime *runtime = substream->runtime;
struct imx_pcm_runtime_data *iprtd = runtime->private_data;
- del_timer_sync(&iprtd->timer);
+ hrtimer_cancel(&iprtd->hrt);
+
kfree(iprtd);
return 0;
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/initval.h>
struct snd_soc_dai *cpu_dai)
{
struct imx_ssi *ssi = cpu_dai->private_data;
+ struct imx_pcm_dma_params *dma_data;
u32 reg, sccr;
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
reg = SSI_STCCR;
- cpu_dai->dma_data = &ssi->dma_params_tx;
+ dma_data = &ssi->dma_params_tx;
} else {
reg = SSI_SRCCR;
- cpu_dai->dma_data = &ssi->dma_params_rx;
+ dma_data = &ssi->dma_params_rx;
}
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
+
sccr = readl(ssi->base + reg) & ~SSI_STCCR_WL_MASK;
/* DAI data (word) size */
dai->private_data = ssi;
if ((cpu_is_mx27() || cpu_is_mx21()) &&
- !(ssi->flags & IMX_SSI_USE_AC97)) {
+ !(ssi->flags & IMX_SSI_USE_AC97) &&
+ (ssi->flags & IMX_SSI_DMA)) {
ssi->flags |= IMX_SSI_DMA;
platform = imx_ssi_dma_mx2_init(pdev, ssi);
} else
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/wait.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/err.h>
#include <linux/clk.h>
omap_mcbsp_dai_dma_params[id][substream->stream].sync_mode = sync_mode;
omap_mcbsp_dai_dma_params[id][substream->stream].data_type =
OMAP_DMA_DATA_TYPE_S16;
- cpu_dai->dma_data = &omap_mcbsp_dai_dma_params[id][substream->stream];
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream,
+ &omap_mcbsp_dai_dma_params[id][substream->stream]);
if (mcbsp_data->configured) {
/* McBSP already configured by another stream */
int stream = substream->stream;
int channels, err, link_mask = 0;
- cpu_dai->dma_data = &omap_mcpdm_dai_dma_params[stream];
+ snd_soc_dai_set_dma_data(cpu_dai, substream,
+ &omap_mcpdm_dai_dma_params[stream]);
channels = params_channels(params);
switch (channels) {
*/
#include <linux/dma-mapping.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
struct omap_runtime_data *prtd = runtime->private_data;
unsigned long flags;
- if ((cpu_is_omap1510()) &&
- (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)) {
+ if ((cpu_is_omap1510())) {
/*
* OMAP1510 doesn't fully support DMA progress counter
* and there is no software emulation implemented yet,
- * so have to maintain our own playback progress counter
+ * so have to maintain our own progress counters
* that can be used by omap_pcm_pointer() instead.
*/
spin_lock_irqsave(&prtd->lock, flags);
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct omap_runtime_data *prtd = runtime->private_data;
- struct omap_pcm_dma_data *dma_data = rtd->dai->cpu_dai->dma_data;
+ struct omap_pcm_dma_data *dma_data;
int err = 0;
+ dma_data = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
+
/* return if this is a bufferless transfer e.g.
* codec <--> BT codec or GSM modem -- lg FIXME */
if (!dma_data)
dma_params.frame_count = runtime->periods;
omap_set_dma_params(prtd->dma_ch, &dma_params);
- if ((cpu_is_omap1510()) &&
- (substream->stream == SNDRV_PCM_STREAM_PLAYBACK))
+ if ((cpu_is_omap1510()))
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ |
OMAP_DMA_LAST_IRQ | OMAP_DMA_BLOCK_IRQ);
else
dma_addr_t ptr;
snd_pcm_uframes_t offset;
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ if (cpu_is_omap1510()) {
+ offset = prtd->period_index * runtime->period_size;
+ } else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
ptr = omap_get_dma_dst_pos(prtd->dma_ch);
offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
- } else if (!(cpu_is_omap1510())) {
+ } else {
ptr = omap_get_dma_src_pos(prtd->dma_ch);
offset = bytes_to_frames(runtime, ptr - runtime->dma_addr);
- } else
- offset = prtd->period_index * runtime->period_size;
+ }
if (offset >= runtime->buffer_size)
offset = 0;
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
ssp_disable(ssp);
}
- if (cpu_dai->dma_data) {
- kfree(cpu_dai->dma_data);
- cpu_dai->dma_data = NULL;
- }
+ kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+ snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
+
return ret;
}
clk_disable(ssp->clk);
}
- if (cpu_dai->dma_data) {
- kfree(cpu_dai->dma_data);
- cpu_dai->dma_data = NULL;
- }
+ kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
+ snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
}
#ifdef CONFIG_PM
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
+ struct pxa2xx_pcm_dma_params *dma_data;
+
+ dma_data = snd_soc_dai_get_dma_data(dai, substream);
/* generate correct DMA params */
- if (cpu_dai->dma_data)
- kfree(cpu_dai->dma_data);
+ kfree(dma_data);
/* Network mode with one active slot (ttsa == 1) can be used
* to force 16-bit frame width on the wire (for S16_LE), even
* with two channels. Use 16-bit DMA transfers for this case.
*/
- cpu_dai->dma_data = ssp_get_dma_params(ssp,
+ dma_data = ssp_get_dma_params(ssp,
((chn == 2) && (ttsa != 1)) || (width == 32),
substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ snd_soc_dai_set_dma_data(dai, substream, dma_data);
+
/* we can only change the settings if the port is not in use */
if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
return 0;
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct pxa2xx_pcm_dma_params *dma_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out;
+ dma_data = &pxa2xx_ac97_pcm_stereo_out;
else
- cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in;
+ dma_data = &pxa2xx_ac97_pcm_stereo_in;
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
return 0;
}
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct pxa2xx_pcm_dma_params *dma_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
+ dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
else
- cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
+ dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
return 0;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return -ENODEV;
else
- cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in;
+ snd_soc_dai_set_dma_data(cpu_dai, substream,
+ &pxa2xx_ac97_pcm_mic_mono_in);
return 0;
}
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct pxa2xx_pcm_dma_params *dma_data;
BUG_ON(IS_ERR(clk_i2s));
clk_enable(clk_i2s);
pxa_i2s_wait();
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- cpu_dai->dma_data = &pxa2xx_i2s_pcm_stereo_out;
+ dma_data = &pxa2xx_i2s_pcm_stereo_out;
else
- cpu_dai->dma_data = &pxa2xx_i2s_pcm_stereo_in;
+ dma_data = &pxa2xx_i2s_pcm_stereo_in;
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
/* is port used by another stream */
if (!(SACR0 & SACR0_ENB)) {
struct snd_pcm_runtime *runtime = substream->runtime;
struct pxa2xx_runtime_data *prtd = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct pxa2xx_pcm_dma_params *dma = rtd->dai->cpu_dai->dma_data;
+ struct pxa2xx_pcm_dma_params *dma;
int ret;
+ dma = snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
+
/* return if this is a bufferless transfer e.g.
* codec <--> BT codec or GSM modem -- lg FIXME */
if (!dma)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct s3c_dma_params *dma_data;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- cpu_dai->dma_data = &s3c_ac97_pcm_out;
+ dma_data = &s3c_ac97_pcm_out;
else
- cpu_dai->dma_data = &s3c_ac97_pcm_in;
+ dma_data = &s3c_ac97_pcm_in;
+
+ snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
return 0;
}
{
u32 ac_glbctrl;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int channel = ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->channel;
+ struct s3c_dma_params *dma_data =
+ snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+ s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
return 0;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return -ENODEV;
else
- cpu_dai->dma_data = &s3c_ac97_mic_in;
+ snd_soc_dai_set_dma_data(cpu_dai, substream, &s3c_ac97_mic_in);
return 0;
}
{
u32 ac_glbctrl;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int channel = ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->channel;
+ struct s3c_dma_params *dma_data =
+ snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
ac_glbctrl = readl(s3c_ac97.regs + S3C_AC97_GLBCTRL);
ac_glbctrl &= ~S3C_AC97_GLBCTRL_MICINTM_MASK;
writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL);
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+ s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
return 0;
}
struct snd_pcm_runtime *runtime = substream->runtime;
struct s3c24xx_runtime_data *prtd = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s3c_dma_params *dma = rtd->dai->cpu_dai->dma_data;
unsigned long totbytes = params_buffer_bytes(params);
+ struct s3c_dma_params *dma =
+ snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
int ret = 0;
+
pr_debug("Entered %s\n", __func__);
/* return if this is a bufferless transfer e.g.
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai_link *dai = rtd->dai;
struct s3c_i2sv2_info *i2s = to_info(dai->cpu_dai);
+ struct s3c_dma_params *dma_data;
u32 iismod;
pr_debug("Entered %s\n", __func__);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dai->cpu_dai->dma_data = i2s->dma_playback;
+ dma_data = i2s->dma_playback;
else
- dai->cpu_dai->dma_data = i2s->dma_capture;
+ dma_data = i2s->dma_capture;
+
+ snd_soc_dai_set_dma_data(dai->cpu_dai, substream, dma_data);
/* Working copies of register */
iismod = readl(i2s->regs + S3C2412_IISMOD);
int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
unsigned long irqs;
int ret = 0;
- int channel = ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->channel;
+ struct s3c_dma_params *dma_data =
+ snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
pr_debug("Entered %s\n", __func__);
* of the auto reload mechanism of S3C24XX.
* This call won't bother S3C64XX.
*/
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+ s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
break;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai_link *dai = rtd->dai;
struct s3c_pcm_info *pcm = to_info(dai->cpu_dai);
+ struct s3c_dma_params *dma_data;
void __iomem *regs = pcm->regs;
struct clk *clk;
int sclk_div, sync_div;
dev_dbg(pcm->dev, "Entered %s\n", __func__);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dai->cpu_dai->dma_data = pcm->dma_playback;
+ dma_data = pcm->dma_playback;
else
- dai->cpu_dai->dma_data = pcm->dma_capture;
+ dma_data = pcm->dma_capture;
+
+ snd_soc_dai_set_dma_data(dai->cpu_dai, substream, dma_data);
/* Strictly check for sample size */
switch (params_format(params)) {
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct s3c_dma_params *dma_data;
u32 iismod;
pr_debug("Entered %s\n", __func__);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- rtd->dai->cpu_dai->dma_data = &s3c24xx_i2s_pcm_stereo_out;
+ dma_data = &s3c24xx_i2s_pcm_stereo_out;
else
- rtd->dai->cpu_dai->dma_data = &s3c24xx_i2s_pcm_stereo_in;
+ dma_data = &s3c24xx_i2s_pcm_stereo_in;
+
+ snd_soc_dai_set_dma_data(rtd->dai->cpu_dai, substream, dma_data);
/* Working copies of register */
iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
iismod &= ~S3C2410_IISMOD_16BIT;
- ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->dma_size = 1;
+ dma_data->dma_size = 1;
break;
case SNDRV_PCM_FORMAT_S16_LE:
iismod |= S3C2410_IISMOD_16BIT;
- ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->dma_size = 2;
+ dma_data->dma_size = 2;
break;
default:
return -EINVAL;
{
int ret = 0;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int channel = ((struct s3c_dma_params *)
- rtd->dai->cpu_dai->dma_data)->channel;
+ struct s3c_dma_params *dma_data =
+ snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
pr_debug("Entered %s\n", __func__);
else
s3c24xx_snd_txctrl(1);
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STARTED);
+ s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
#include <linux/clk.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
s6000_i2s_dai.dev = &pdev->dev;
s6000_i2s_dai.private_data = dev;
- s6000_i2s_dai.dma_data = &dev->dma_params;
+ s6000_i2s_dai.capture.dma_data = &dev->dma_params;
+ s6000_i2s_dai.playback.dma_data = &dev->dma_params;
dev->sifbase = sifmem->start;
dev->scbbase = mmio;
struct snd_pcm_runtime *runtime = substream->runtime;
struct s6000_runtime_data *prtd = runtime->private_data;
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
int channel;
unsigned int period_size;
unsigned int dma_offset;
dma_addr_t dma_pos;
dma_addr_t src, dst;
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
period_size = snd_pcm_lib_period_bytes(substream);
dma_offset = prtd->period * period_size;
dma_pos = runtime->dma_addr + dma_offset;
{
struct snd_pcm *pcm = data;
struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *params =
+ snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
struct s6000_runtime_data *prtd;
unsigned int has_xrun;
int i, ret = IRQ_NONE;
{
struct s6000_runtime_data *prtd = substream->runtime->private_data;
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
unsigned long flags;
int srcinc;
u32 dma;
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
spin_lock_irqsave(&prtd->lock, flags);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
{
struct s6000_runtime_data *prtd = substream->runtime->private_data;
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
unsigned long flags;
u32 channel;
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
channel = par->dma_out;
else
static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
int ret;
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
ret = par->trigger(substream, cmd, 0);
if (ret < 0)
return ret;
static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
struct snd_pcm_runtime *runtime = substream->runtime;
struct s6000_runtime_data *prtd = runtime->private_data;
unsigned long flags;
unsigned int offset;
dma_addr_t count;
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
spin_lock_irqsave(&prtd->lock, flags);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
static int s6000_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
struct snd_pcm_runtime *runtime = substream->runtime;
struct s6000_runtime_data *prtd;
int ret;
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware);
ret = snd_pcm_hw_constraint_step(runtime, 0,
struct snd_pcm_hw_params *hw_params)
{
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par;
int ret;
ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
return ret;
}
+ par = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
if (par->same_rate) {
spin_lock(&par->lock);
if (par->rate == -1 ||
static int s6000_pcm_hw_free(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par = soc_runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *par =
+ snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
spin_lock(&par->lock);
par->in_use &= ~(1 << substream->stream);
static void s6000_pcm_free(struct snd_pcm *pcm)
{
struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *params =
+ snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
free_irq(params->irq, pcm);
snd_pcm_lib_preallocate_free_for_all(pcm);
struct snd_soc_dai *dai, struct snd_pcm *pcm)
{
struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_pcm_dma_params *params = runtime->dai->cpu_dai->dma_data;
+ struct s6000_pcm_dma_params *params;
int res;
+ params = snd_soc_dai_get_dma_data(soc_runtime->dai->cpu_dai, substream);
+
if (!card->dev->dma_mask)
card->dev->dma_mask = &s6000_pcm_dmamask;
if (!card->dev->coherent_dma_mask)
select DMA_ENGINE
select DMADEVICES
select SH_DMAE
+ select FW_LOADER
##
## Boards
*/
#include <linux/module.h>
+#include <linux/gfp.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/list.h>
#include <linux/pm_runtime.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/pm_runtime.h>
+#include <linux/slab.h>
#include <asm/clock.h>
#include <asm/siu.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
#include <sound/control.h>
#include <sound/core.h>
#include <linux/bitops.h>
#include <linux/debugfs.h>
#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <sound/ac97_codec.h>
#include <sound/core.h>
#include <sound/pcm.h>
mutex_unlock(&codec->mutex);
return ret;
}
- if (card->dai_link[i].codec_dai->ac97_control) {
+ /* Check for codec->ac97 to handle the ac97.c fun */
+ if (card->dai_link[i].codec_dai->ac97_control && codec->ac97) {
snd_ac97_dev_add_pdata(codec->ac97,
card->dai_link[i].cpu_dai->ac97_pdata);
}
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/debugfs.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
MODULE_DESCRIPTION("TXx9 ACLC AC97 driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9aclc-ac97");
MODULE_AUTHOR("Atsushi Nemoto <anemo@mba.ocn.ne.jp>");
MODULE_DESCRIPTION("Generic TXx9 ACLC ALSA SoC audio driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:txx9aclc-generic");
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
+#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/sched.h>
#include <asm/uaccess.h>
#include "oss/sound_firmware.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
+#include <linux/gfp.h>
#include <sound/core.h>
#include <sound/pcm.h>
*/
#include <linux/wait.h>
-#include <linux/slab.h>
#include <sound/core.h>
#include <sound/emux_synth.h>
#include <sound/info.h>
*/
#include <linux/spinlock.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <sound/core.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/gfp.h>
#include <linux/usb.h>
#include <sound/initval.h>
#include <sound/core.h>
*/
#include <linux/usb.h>
+#include <linux/gfp.h>
#include <sound/rawmidi.h>
#include <sound/core.h>
#include <sound/pcm.h>
DEFINE_WAIT(wait);
long timeout = msecs_to_jiffies(50);
+ if (ep->umidi->disconnected)
+ return;
/*
* The substream buffer is empty, but some data might still be in the
* currently active URBs, so we have to wait for those to complete.
* Frees an output endpoint.
* May be called when ep hasn't been initialized completely.
*/
-static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint* ep)
+static void snd_usbmidi_out_endpoint_clear(struct snd_usb_midi_out_endpoint *ep)
{
unsigned int i;
for (i = 0; i < OUTPUT_URBS; ++i)
- if (ep->urbs[i].urb)
+ if (ep->urbs[i].urb) {
free_urb_and_buffer(ep->umidi, ep->urbs[i].urb,
ep->max_transfer);
+ ep->urbs[i].urb = NULL;
+ }
+}
+
+static void snd_usbmidi_out_endpoint_delete(struct snd_usb_midi_out_endpoint *ep)
+{
+ snd_usbmidi_out_endpoint_clear(ep);
kfree(ep);
}
usb_kill_urb(ep->out->urbs[j].urb);
if (umidi->usb_protocol_ops->finish_out_endpoint)
umidi->usb_protocol_ops->finish_out_endpoint(ep->out);
+ ep->out->active_urbs = 0;
+ if (ep->out->drain_urbs) {
+ ep->out->drain_urbs = 0;
+ wake_up(&ep->out->drain_wait);
+ }
}
if (ep->in)
for (j = 0; j < INPUT_URBS; ++j)
usb_kill_urb(ep->in->urbs[j]);
/* free endpoints here; later call can result in Oops */
- if (ep->out) {
- snd_usbmidi_out_endpoint_delete(ep->out);
- ep->out = NULL;
- }
+ if (ep->out)
+ snd_usbmidi_out_endpoint_clear(ep->out);
if (ep->in) {
snd_usbmidi_in_endpoint_delete(ep->in);
ep->in = NULL;
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/audio.h>
#include <sound/core.h>
*/
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <sound/core.h>
#include <sound/memalloc.h>
*/
#include <linux/usb.h>
+#include <linux/gfp.h>
#include "usb_stream.h"
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
#include <sound/core.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include <linux/usb.h>
#include <sound/core.h>
#include <sound/info.h>
*/
#include <linux/delay.h>
+#include <linux/gfp.h>
#include "usbusx2yaudio.c"
#if defined(USX2Y_NRPACKS_VARIABLE) || (!defined(USX2Y_NRPACKS_VARIABLE) && USX2Y_NRPACKS == 1)
CFLAGS = -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
EXTLIBS = -lpthread -lrt -lelf -lm
-ALL_CFLAGS = $(CFLAGS)
+ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
ALL_LDFLAGS = $(LDFLAGS)
STRIP ?= strip
PTHREAD_LIBS =
endif
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
endif
- ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
BASIC_CFLAGS += -DLIBELF_NO_MMAP
endif
else
msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
endif
-ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <dwarf.h>'; echo '\#include <libdw.h>'; echo 'int main(void) { Dwarf *dbg; dbg = dwarf_begin(0, DWARF_C_READ); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf -o $(BITBUCKET) $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdw.h found or old libdw.h found, disables dwarf support. Please install elfutils-devel/elfutils-dev);
BASIC_CFLAGS += -DNO_DWARF_SUPPORT
else
#include "util/probe-event.h"
#define MAX_PATH_LEN 256
-#define MAX_PROBES 128
/* Session management structure */
static struct {
struct sym_entry *syme, *n;
struct rb_root tmp = RB_ROOT;
struct rb_node *nd;
- int sym_width = 0, dso_width = 0, max_dso_width;
+ int sym_width = 0, dso_width = 0, dso_short_width = 0;
const int win_width = winsize.ws_col - 1;
samples = userspace_samples = 0;
if (syme->map->dso->long_name_len > dso_width)
dso_width = syme->map->dso->long_name_len;
+ if (syme->map->dso->short_name_len > dso_short_width)
+ dso_short_width = syme->map->dso->short_name_len;
+
if (syme->name_len > sym_width)
sym_width = syme->name_len;
}
printed = 0;
- max_dso_width = winsize.ws_col - sym_width - 29;
- if (dso_width > max_dso_width)
- dso_width = max_dso_width;
+ if (sym_width + dso_width > winsize.ws_col - 29) {
+ dso_width = dso_short_width;
+ if (sym_width + dso_width > winsize.ws_col - 29)
+ sym_width = winsize.ws_col - dso_width - 29;
+ }
putchar('\n');
if (nr_counters == 1)
printf(" samples pcnt");
/* Parse probe point */
parse_perf_probe_probepoint(argv[0], pp);
- if (pp->file || pp->line)
+ if (pp->file || pp->line || pp->lazy_line)
*need_dwarf = true;
/* Copy arguments and ensure return probe has no C argument */
die("%u exceeds max register number.", regn);
if (deref)
- ret = snprintf(pf->buf, pf->len, " %s=+%ju(%s)",
- pf->var, (uintmax_t)offs, regs);
+ ret = snprintf(pf->buf, pf->len, " %s=%+jd(%s)",
+ pf->var, (intmax_t)offs, regs);
else
ret = snprintf(pf->buf, pf->len, " %s=%s", pf->var, regs);
DIE_IF(ret < 0);
if (dwarf_attr(vr_die, DW_AT_location, &attr) == NULL)
goto error;
/* TODO: handle more than 1 exprs */
- ret = dwarf_getlocation_addr(&attr, (pf->addr - pf->cu_base),
- &expr, &nexpr, 1);
+ ret = dwarf_getlocation_addr(&attr, pf->addr, &expr, &nexpr, 1);
if (ret <= 0 || nexpr == 0)
goto error;
/* Get the frame base attribute/ops */
dwarf_attr(sp_die, DW_AT_frame_base, &fb_attr);
- ret = dwarf_getlocation_addr(&fb_attr, (pf->addr - pf->cu_base),
- &pf->fb_ops, &nops, 1);
+ ret = dwarf_getlocation_addr(&fb_attr, pf->addr, &pf->fb_ops, &nops, 1);
if (ret <= 0 || nops == 0)
pf->fb_ops = NULL;
/* *pf->fb_ops will be cached in libdw. Don't free it. */
pf->fb_ops = NULL;
+ if (pp->found == MAX_PROBES)
+ die("Too many( > %d) probe point found.\n", MAX_PROBES);
+
pp->probes[pp->found] = strdup(tmp);
pp->found++;
}
int find_probe_point(int fd, struct probe_point *pp)
{
struct probe_finder pf = {.pp = pp};
- int ret;
Dwarf_Off off, noff;
size_t cuhl;
Dwarf_Die *diep;
pf.fname = NULL;
if (!pp->file || pf.fname) {
- /* Save CU base address (for frame_base) */
- ret = dwarf_lowpc(&pf.cu_die, &pf.cu_base);
- if (ret != 0)
- pf.cu_base = 0;
if (pp->function)
find_probe_point_by_func(&pf);
else if (pp->lazy_line)
/* For variable searching */
Dwarf_Op *fb_ops; /* Frame base attribute */
- Dwarf_Addr cu_base; /* Current CU base address */
const char *var; /* Current variable name */
char *buf; /* Current output buffer */
int len; /* Length of output buffer */
int size __unused,
unsigned long long nsecs, char *comm)
{
- PyObject *handler, *retval, *context, *t;
+ PyObject *handler, *retval, *context, *t, *obj;
static char handler_name[256];
struct format_field *field;
unsigned long long val;
offset &= 0xffff;
} else
offset = field->offset;
- PyTuple_SetItem(t, n++,
- PyString_FromString((char *)data + offset));
+ obj = PyString_FromString((char *)data + offset);
} else { /* FIELD_IS_NUMERIC */
val = read_size(data + field->offset, field->size);
if (field->flags & FIELD_IS_SIGNED) {
- PyTuple_SetItem(t, n++, PyInt_FromLong(val));
+ if ((long long)val >= LONG_MIN &&
+ (long long)val <= LONG_MAX)
+ obj = PyInt_FromLong(val);
+ else
+ obj = PyLong_FromLongLong(val);
} else {
- PyTuple_SetItem(t, n++, PyInt_FromLong(val));
+ if (val <= LONG_MAX)
+ obj = PyInt_FromLong(val);
+ else
+ obj = PyLong_FromUnsignedLongLong(val);
}
}
+ PyTuple_SetItem(t, n++, obj);
}
if (_PyTuple_Resize(&t, n) == -1)
self->long_name_len = strlen(name);
}
+static void dso__set_short_name(struct dso *self, const char *name)
+{
+ if (name == NULL)
+ return;
+ self->short_name = name;
+ self->short_name_len = strlen(name);
+}
+
static void dso__set_basename(struct dso *self)
{
- self->short_name = basename(self->long_name);
+ dso__set_short_name(self, basename(self->long_name));
}
struct dso *dso__new(const char *name)
int i;
strcpy(self->name, name);
dso__set_long_name(self, self->name);
- self->short_name = self->name;
+ dso__set_short_name(self, self->name);
for (i = 0; i < MAP__NR_TYPES; ++i)
self->symbols[i] = self->symbol_names[i] = RB_ROOT;
self->slen_calculated = 0;
struct kmap *kmap = self->kernel ? map__kmap(map) : NULL;
struct map *curr_map = map;
struct dso *curr_dso = self;
- size_t dso_name_len = strlen(self->short_name);
Elf_Data *symstrs, *secstrs;
uint32_t nr_syms;
int err = -1;
char dso_name[PATH_MAX];
if (strcmp(section_name,
- curr_dso->short_name + dso_name_len) == 0)
+ (curr_dso->short_name +
+ self->short_name_len)) == 0)
goto new_symbol;
if (strcmp(section_name, ".text") == 0) {
struct dso *self = dso__new(name ?: "[kernel.kallsyms]");
if (self != NULL) {
- self->short_name = "[kernel]";
+ dso__set_short_name(self, "[kernel]");
self->kernel = 1;
}
u8 sorted_by_name;
u8 loaded;
u8 build_id[BUILD_ID_SIZE];
- u16 long_name_len;
const char *short_name;
char *long_name;
+ u16 long_name_len;
+ u16 short_name_len;
char name[0];
};
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/slab.h>
#include "irq.h"
static struct kvm_assigned_dev_kernel *kvm_find_assigned_dev(struct list_head *head,
#include "iodev.h"
#include <linux/kvm_host.h>
+#include <linux/slab.h>
#include <linux/kvm.h>
#include "coalesced_mmio.h"
#include <linux/list.h>
#include <linux/eventfd.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include "iodev.h"
#include <linux/smp.h>
#include <linux/hrtimer.h>
#include <linux/io.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/current.h>
*/
#include <linux/kvm_host.h>
+#include <linux/slab.h>
#include <trace/events/kvm.h>
#include <asm/msidef.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/percpu.h>
-#include <linux/gfp.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/vmalloc.h>
#include <linux/compat.h>
#include <linux/srcu.h>
#include <linux/hugetlb.h>
+#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/io.h>
struct mm_struct *mm)
{
struct kvm *kvm = mmu_notifier_to_kvm(mn);
+ int idx;
+
+ idx = srcu_read_lock(&kvm->srcu);
kvm_arch_flush_shadow(kvm);
+ srcu_read_unlock(&kvm->srcu, idx);
}
static const struct mmu_notifier_ops kvm_mmu_notifier_ops = {
/* Allocate page dirty bitmap if needed */
if ((new.flags & KVM_MEM_LOG_DIRTY_PAGES) && !new.dirty_bitmap) {
- unsigned dirty_bytes = ALIGN(npages, BITS_PER_LONG) / 8;
+ unsigned long dirty_bytes = kvm_dirty_bitmap_bytes(&new);
new.dirty_bitmap = vmalloc(dirty_bytes);
if (!new.dirty_bitmap)
{
struct kvm_memory_slot *memslot;
int r, i;
- int n;
+ unsigned long n;
unsigned long any = 0;
r = -EINVAL;
if (!memslot->dirty_bitmap)
goto out;
- n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ n = kvm_dirty_bitmap_bytes(memslot);
for (i = 0; !any && i < n/sizeof(long); ++i)
any = memslot->dirty_bitmap[i];
memslot = gfn_to_memslot_unaliased(kvm, gfn);
if (memslot && memslot->dirty_bitmap) {
unsigned long rel_gfn = gfn - memslot->base_gfn;
+ unsigned long *p = memslot->dirty_bitmap +
+ rel_gfn / BITS_PER_LONG;
+ int offset = rel_gfn % BITS_PER_LONG;
/* avoid RMW */
- if (!generic_test_le_bit(rel_gfn, memslot->dirty_bitmap))
- generic___set_le_bit(rel_gfn, memslot->dirty_bitmap);
+ if (!generic_test_le_bit(offset, p))
+ generic___set_le_bit(offset, p);
}
}
projects / linux-2.6-block.git / commitdiff