* db8500_thermal.c - DB8500 Thermal Management Implementation
*
* Copyright (C) 2012 ST-Ericsson
- * Copyright (C) 2012 Linaro Ltd.
+ * Copyright (C) 2012-2019 Linaro Ltd.
*
- * Author: Hongbo Zhang <hongbo.zhang@linaro.com>
+ * Authors: Hongbo Zhang, Linus Walleij
*/
#include <linux/cpu_cooling.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/platform_data/db8500_thermal.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/thermal.h>
#define PRCMU_DEFAULT_MEASURE_TIME 0xFFF
#define PRCMU_DEFAULT_LOW_TEMP 0
+/**
+ * db8500_thermal_points - the interpolation points that trigger
+ * interrupts
+ */
+static const unsigned long db8500_thermal_points[] = {
+ 15000,
+ 20000,
+ 25000,
+ 30000,
+ 35000,
+ 40000,
+ 45000,
+ 50000,
+ 55000,
+ 60000,
+ 65000,
+ 70000,
+ 75000,
+ 80000,
+ /*
+ * This is where things start to get really bad for the
+ * SoC and the thermal zones should be set up to trigger
+ * critical temperature at 85000 mC so we don't get above
+ * this point.
+ */
+ 85000,
+ 90000,
+ 95000,
+ 100000,
+};
+
struct db8500_thermal_zone {
- struct thermal_zone_device *therm_dev;
- struct mutex th_lock;
- struct work_struct therm_work;
- struct db8500_thsens_platform_data *trip_tab;
- enum thermal_device_mode mode;
+ struct thermal_zone_device *tz;
enum thermal_trend trend;
- unsigned long cur_temp_pseudo;
+ unsigned long interpolated_temp;
unsigned int cur_index;
};
-/* Local function to check if thermal zone matches cooling devices */
-static int db8500_thermal_match_cdev(struct thermal_cooling_device *cdev,
- struct db8500_trip_point *trip_point)
-{
- int i;
-
- if (!strlen(cdev->type))
- return -EINVAL;
-
- for (i = 0; i < COOLING_DEV_MAX; i++) {
- if (!strcmp(trip_point->cdev_name[i], cdev->type))
- return 0;
- }
-
- return -ENODEV;
-}
-
-/* Callback to bind cooling device to thermal zone */
-static int db8500_cdev_bind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
- unsigned long max_state, upper, lower;
- int i, ret = -EINVAL;
-
- cdev->ops->get_max_state(cdev, &max_state);
-
- for (i = 0; i < ptrips->num_trips; i++) {
- if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i]))
- continue;
-
- upper = lower = i > max_state ? max_state : i;
-
- ret = thermal_zone_bind_cooling_device(thermal, i, cdev,
- upper, lower, THERMAL_WEIGHT_DEFAULT);
-
- dev_info(&cdev->device, "%s bind to %d: %d-%s\n", cdev->type,
- i, ret, ret ? "fail" : "succeed");
- }
-
- return ret;
-}
-
-/* Callback to unbind cooling device from thermal zone */
-static int db8500_cdev_unbind(struct thermal_zone_device *thermal,
- struct thermal_cooling_device *cdev)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
- int i, ret = -EINVAL;
-
- for (i = 0; i < ptrips->num_trips; i++) {
- if (db8500_thermal_match_cdev(cdev, &ptrips->trip_points[i]))
- continue;
-
- ret = thermal_zone_unbind_cooling_device(thermal, i, cdev);
-
- dev_info(&cdev->device, "%s unbind from %d: %s\n", cdev->type,
- i, ret ? "fail" : "succeed");
- }
-
- return ret;
-}
-
/* Callback to get current temperature */
-static int db8500_sys_get_temp(struct thermal_zone_device *thermal, int *temp)
+static int db8500_thermal_get_temp(void *data, int *temp)
{
- struct db8500_thermal_zone *pzone = thermal->devdata;
+ struct db8500_thermal_zone *th = data;
/*
* TODO: There is no PRCMU interface to get temperature data currently,
* so a pseudo temperature is returned , it works for thermal framework
* and this will be fixed when the PRCMU interface is available.
*/
- *temp = pzone->cur_temp_pseudo;
+ *temp = th->interpolated_temp;
return 0;
}
/* Callback to get temperature changing trend */
-static int db8500_sys_get_trend(struct thermal_zone_device *thermal,
- int trip, enum thermal_trend *trend)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
-
- *trend = pzone->trend;
-
- return 0;
-}
-
-/* Callback to get thermal zone mode */
-static int db8500_sys_get_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode *mode)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
-
- mutex_lock(&pzone->th_lock);
- *mode = pzone->mode;
- mutex_unlock(&pzone->th_lock);
-
- return 0;
-}
-
-/* Callback to set thermal zone mode */
-static int db8500_sys_set_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode mode)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
-
- mutex_lock(&pzone->th_lock);
-
- pzone->mode = mode;
- if (mode == THERMAL_DEVICE_ENABLED)
- schedule_work(&pzone->therm_work);
-
- mutex_unlock(&pzone->th_lock);
-
- return 0;
-}
-
-/* Callback to get trip point type */
-static int db8500_sys_get_trip_type(struct thermal_zone_device *thermal,
- int trip, enum thermal_trip_type *type)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
-
- if (trip >= ptrips->num_trips)
- return -EINVAL;
-
- *type = ptrips->trip_points[trip].type;
-
- return 0;
-}
-
-/* Callback to get trip point temperature */
-static int db8500_sys_get_trip_temp(struct thermal_zone_device *thermal,
- int trip, int *temp)
+static int db8500_thermal_get_trend(void *data, int trip, enum thermal_trend *trend)
{
- struct db8500_thermal_zone *pzone = thermal->devdata;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
+ struct db8500_thermal_zone *th = data;
- if (trip >= ptrips->num_trips)
- return -EINVAL;
-
- *temp = ptrips->trip_points[trip].temp;
+ *trend = th->trend;
return 0;
}
-/* Callback to get critical trip point temperature */
-static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal,
- int *temp)
-{
- struct db8500_thermal_zone *pzone = thermal->devdata;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
- int i;
-
- for (i = ptrips->num_trips - 1; i > 0; i--) {
- if (ptrips->trip_points[i].type == THERMAL_TRIP_CRITICAL) {
- *temp = ptrips->trip_points[i].temp;
- return 0;
- }
- }
-
- return -EINVAL;
-}
-
-static struct thermal_zone_device_ops thdev_ops = {
- .bind = db8500_cdev_bind,
- .unbind = db8500_cdev_unbind,
- .get_temp = db8500_sys_get_temp,
- .get_trend = db8500_sys_get_trend,
- .get_mode = db8500_sys_get_mode,
- .set_mode = db8500_sys_set_mode,
- .get_trip_type = db8500_sys_get_trip_type,
- .get_trip_temp = db8500_sys_get_trip_temp,
- .get_crit_temp = db8500_sys_get_crit_temp,
+static struct thermal_zone_of_device_ops thdev_ops = {
+ .get_temp = db8500_thermal_get_temp,
+ .get_trend = db8500_thermal_get_trend,
};
-static void db8500_thermal_update_config(struct db8500_thermal_zone *pzone,
- unsigned int idx, enum thermal_trend trend,
- unsigned long next_low, unsigned long next_high)
+static void db8500_thermal_update_config(struct db8500_thermal_zone *th,
+ unsigned int idx,
+ enum thermal_trend trend,
+ unsigned long next_low,
+ unsigned long next_high)
{
prcmu_stop_temp_sense();
- pzone->cur_index = idx;
- pzone->cur_temp_pseudo = (next_low + next_high)/2;
- pzone->trend = trend;
+ th->cur_index = idx;
+ th->interpolated_temp = (next_low + next_high)/2;
+ th->trend = trend;
+ /*
+ * The PRCMU accept absolute temperatures in celsius so divide
+ * down the millicelsius with 1000
+ */
prcmu_config_hotmon((u8)(next_low/1000), (u8)(next_high/1000));
prcmu_start_temp_sense(PRCMU_DEFAULT_MEASURE_TIME);
}
static irqreturn_t prcmu_low_irq_handler(int irq, void *irq_data)
{
- struct db8500_thermal_zone *pzone = irq_data;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
- unsigned int idx = pzone->cur_index;
+ struct db8500_thermal_zone *th = irq_data;
+ unsigned int idx = th->cur_index;
unsigned long next_low, next_high;
- if (unlikely(idx == 0))
+ if (idx == 0)
/* Meaningless for thermal management, ignoring it */
return IRQ_HANDLED;
if (idx == 1) {
- next_high = ptrips->trip_points[0].temp;
+ next_high = db8500_thermal_points[0];
next_low = PRCMU_DEFAULT_LOW_TEMP;
} else {
- next_high = ptrips->trip_points[idx-1].temp;
- next_low = ptrips->trip_points[idx-2].temp;
+ next_high = db8500_thermal_points[idx - 1];
+ next_low = db8500_thermal_points[idx - 2];
}
idx -= 1;
- db8500_thermal_update_config(pzone, idx, THERMAL_TREND_DROPPING,
- next_low, next_high);
-
- dev_dbg(&pzone->therm_dev->device,
+ db8500_thermal_update_config(th, idx, THERMAL_TREND_DROPPING,
+ next_low, next_high);
+ dev_dbg(&th->tz->device,
"PRCMU set max %ld, min %ld\n", next_high, next_low);
- schedule_work(&pzone->therm_work);
+ thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
static irqreturn_t prcmu_high_irq_handler(int irq, void *irq_data)
{
- struct db8500_thermal_zone *pzone = irq_data;
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
- unsigned int idx = pzone->cur_index;
+ struct db8500_thermal_zone *th = irq_data;
+ unsigned int idx = th->cur_index;
unsigned long next_low, next_high;
+ int num_points = ARRAY_SIZE(db8500_thermal_points);
- if (idx < ptrips->num_trips - 1) {
- next_high = ptrips->trip_points[idx+1].temp;
- next_low = ptrips->trip_points[idx].temp;
+ if (idx < num_points - 1) {
+ next_high = db8500_thermal_points[idx+1];
+ next_low = db8500_thermal_points[idx];
idx += 1;
- db8500_thermal_update_config(pzone, idx, THERMAL_TREND_RAISING,
- next_low, next_high);
+ db8500_thermal_update_config(th, idx, THERMAL_TREND_RAISING,
+ next_low, next_high);
- dev_dbg(&pzone->therm_dev->device,
- "PRCMU set max %ld, min %ld\n", next_high, next_low);
- } else if (idx == ptrips->num_trips - 1)
- pzone->cur_temp_pseudo = ptrips->trip_points[idx].temp + 1;
+ dev_info(&th->tz->device,
+ "PRCMU set max %ld, min %ld\n", next_high, next_low);
+ } else if (idx == num_points - 1)
+ /* So we roof out 1 degree over the max point */
+ th->interpolated_temp = db8500_thermal_points[idx] + 1;
- schedule_work(&pzone->therm_work);
+ thermal_zone_device_update(th->tz, THERMAL_EVENT_UNSPECIFIED);
return IRQ_HANDLED;
}
-static void db8500_thermal_work(struct work_struct *work)
-{
- enum thermal_device_mode cur_mode;
- struct db8500_thermal_zone *pzone;
-
- pzone = container_of(work, struct db8500_thermal_zone, therm_work);
-
- mutex_lock(&pzone->th_lock);
- cur_mode = pzone->mode;
- mutex_unlock(&pzone->th_lock);
-
- if (cur_mode == THERMAL_DEVICE_DISABLED)
- return;
-
- thermal_zone_device_update(pzone->therm_dev, THERMAL_EVENT_UNSPECIFIED);
- dev_dbg(&pzone->therm_dev->device, "thermal work finished.\n");
-}
-
-#ifdef CONFIG_OF
-static struct db8500_thsens_platform_data*
- db8500_thermal_parse_dt(struct platform_device *pdev)
-{
- struct db8500_thsens_platform_data *ptrips;
- struct device_node *np = pdev->dev.of_node;
- char prop_name[32];
- const char *tmp_str;
- u32 tmp_data;
- int i, j;
-
- ptrips = devm_kzalloc(&pdev->dev, sizeof(*ptrips), GFP_KERNEL);
- if (!ptrips)
- return NULL;
-
- if (of_property_read_u32(np, "num-trips", &tmp_data))
- goto err_parse_dt;
-
- if (tmp_data > THERMAL_MAX_TRIPS)
- goto err_parse_dt;
-
- ptrips->num_trips = tmp_data;
-
- for (i = 0; i < ptrips->num_trips; i++) {
- sprintf(prop_name, "trip%d-temp", i);
- if (of_property_read_u32(np, prop_name, &tmp_data))
- goto err_parse_dt;
-
- ptrips->trip_points[i].temp = tmp_data;
-
- sprintf(prop_name, "trip%d-type", i);
- if (of_property_read_string(np, prop_name, &tmp_str))
- goto err_parse_dt;
-
- if (!strcmp(tmp_str, "active"))
- ptrips->trip_points[i].type = THERMAL_TRIP_ACTIVE;
- else if (!strcmp(tmp_str, "passive"))
- ptrips->trip_points[i].type = THERMAL_TRIP_PASSIVE;
- else if (!strcmp(tmp_str, "hot"))
- ptrips->trip_points[i].type = THERMAL_TRIP_HOT;
- else if (!strcmp(tmp_str, "critical"))
- ptrips->trip_points[i].type = THERMAL_TRIP_CRITICAL;
- else
- goto err_parse_dt;
-
- sprintf(prop_name, "trip%d-cdev-num", i);
- if (of_property_read_u32(np, prop_name, &tmp_data))
- goto err_parse_dt;
-
- if (tmp_data > COOLING_DEV_MAX)
- goto err_parse_dt;
-
- for (j = 0; j < tmp_data; j++) {
- sprintf(prop_name, "trip%d-cdev-name%d", i, j);
- if (of_property_read_string(np, prop_name, &tmp_str))
- goto err_parse_dt;
-
- if (strlen(tmp_str) >= THERMAL_NAME_LENGTH)
- goto err_parse_dt;
-
- strcpy(ptrips->trip_points[i].cdev_name[j], tmp_str);
- }
- }
- return ptrips;
-
-err_parse_dt:
- dev_err(&pdev->dev, "Parsing device tree data error.\n");
- return NULL;
-}
-#else
-static inline struct db8500_thsens_platform_data*
- db8500_thermal_parse_dt(struct platform_device *pdev)
-{
- return NULL;
-}
-#endif
-
static int db8500_thermal_probe(struct platform_device *pdev)
{
- struct db8500_thermal_zone *pzone = NULL;
- struct db8500_thsens_platform_data *ptrips = NULL;
- struct device_node *np = pdev->dev.of_node;
+ struct db8500_thermal_zone *th = NULL;
+ struct device *dev = &pdev->dev;
int low_irq, high_irq, ret = 0;
- unsigned long dft_low, dft_high;
- if (np)
- ptrips = db8500_thermal_parse_dt(pdev);
- else
- ptrips = dev_get_platdata(&pdev->dev);
-
- if (!ptrips)
- return -EINVAL;
-
- pzone = devm_kzalloc(&pdev->dev, sizeof(*pzone), GFP_KERNEL);
- if (!pzone)
+ th = devm_kzalloc(dev, sizeof(*th), GFP_KERNEL);
+ if (!th)
return -ENOMEM;
- mutex_init(&pzone->th_lock);
- mutex_lock(&pzone->th_lock);
-
- pzone->mode = THERMAL_DEVICE_DISABLED;
- pzone->trip_tab = ptrips;
-
- INIT_WORK(&pzone->therm_work, db8500_thermal_work);
-
low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
if (low_irq < 0) {
- dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n");
- ret = low_irq;
- goto out_unlock;
+ dev_err(dev, "Get IRQ_HOTMON_LOW failed\n");
+ return low_irq;
}
- ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL,
+ ret = devm_request_threaded_irq(dev, low_irq, NULL,
prcmu_low_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
- "dbx500_temp_low", pzone);
+ "dbx500_temp_low", th);
if (ret < 0) {
- dev_err(&pdev->dev, "Failed to allocate temp low irq.\n");
- goto out_unlock;
+ dev_err(dev, "failed to allocate temp low irq\n");
+ return ret;
}
high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");
if (high_irq < 0) {
- dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n");
- ret = high_irq;
- goto out_unlock;
+ dev_err(dev, "Get IRQ_HOTMON_HIGH failed\n");
+ return high_irq;
}
- ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL,
+ ret = devm_request_threaded_irq(dev, high_irq, NULL,
prcmu_high_irq_handler, IRQF_NO_SUSPEND | IRQF_ONESHOT,
- "dbx500_temp_high", pzone);
+ "dbx500_temp_high", th);
if (ret < 0) {
- dev_err(&pdev->dev, "Failed to allocate temp high irq.\n");
- goto out_unlock;
+ dev_err(dev, "failed to allocate temp high irq\n");
+ return ret;
}
- pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone",
- ptrips->num_trips, 0, pzone, &thdev_ops, NULL, 0, 0);
-
- if (IS_ERR(pzone->therm_dev)) {
- dev_err(&pdev->dev, "Register thermal zone device failed.\n");
- ret = PTR_ERR(pzone->therm_dev);
- goto out_unlock;
+ /* register of thermal sensor and get info from DT */
+ th->tz = devm_thermal_zone_of_sensor_register(dev, 0, th, &thdev_ops);
+ if (IS_ERR(th->tz)) {
+ dev_err(dev, "register thermal zone sensor failed\n");
+ return PTR_ERR(th->tz);
}
- dev_info(&pdev->dev, "Thermal zone device registered.\n");
-
- dft_low = PRCMU_DEFAULT_LOW_TEMP;
- dft_high = ptrips->trip_points[0].temp;
-
- db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE,
- dft_low, dft_high);
-
- platform_set_drvdata(pdev, pzone);
- pzone->mode = THERMAL_DEVICE_ENABLED;
+ dev_info(dev, "thermal zone sensor registered\n");
-out_unlock:
- mutex_unlock(&pzone->th_lock);
+ /* Start measuring at the lowest point */
+ db8500_thermal_update_config(th, 0, THERMAL_TREND_STABLE,
+ PRCMU_DEFAULT_LOW_TEMP,
+ db8500_thermal_points[0]);
- return ret;
-}
-
-static int db8500_thermal_remove(struct platform_device *pdev)
-{
- struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev);
-
- thermal_zone_device_unregister(pzone->therm_dev);
- cancel_work_sync(&pzone->therm_work);
- mutex_destroy(&pzone->th_lock);
+ platform_set_drvdata(pdev, th);
return 0;
}
static int db8500_thermal_suspend(struct platform_device *pdev,
pm_message_t state)
{
- struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev);
-
- flush_work(&pzone->therm_work);
prcmu_stop_temp_sense();
return 0;
static int db8500_thermal_resume(struct platform_device *pdev)
{
- struct db8500_thermal_zone *pzone = platform_get_drvdata(pdev);
- struct db8500_thsens_platform_data *ptrips = pzone->trip_tab;
- unsigned long dft_low, dft_high;
-
- dft_low = PRCMU_DEFAULT_LOW_TEMP;
- dft_high = ptrips->trip_points[0].temp;
+ struct db8500_thermal_zone *th = platform_get_drvdata(pdev);
- db8500_thermal_update_config(pzone, 0, THERMAL_TREND_STABLE,
- dft_low, dft_high);
+ /* Resume and start measuring at the lowest point */
+ db8500_thermal_update_config(th, 0, THERMAL_TREND_STABLE,
+ PRCMU_DEFAULT_LOW_TEMP,
+ db8500_thermal_points[0]);
return 0;
}
-#ifdef CONFIG_OF
static const struct of_device_id db8500_thermal_match[] = {
{ .compatible = "stericsson,db8500-thermal" },
{},
};
MODULE_DEVICE_TABLE(of, db8500_thermal_match);
-#endif
static struct platform_driver db8500_thermal_driver = {
.driver = {
.probe = db8500_thermal_probe,
.suspend = db8500_thermal_suspend,
.resume = db8500_thermal_resume,
- .remove = db8500_thermal_remove,
};
module_platform_driver(db8500_thermal_driver);
projects / linux-2.6-block.git / commitdiff