#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
-#include <asm/ia32.h>
#include <asm/ptrace.h>
#include <asm/ia32_unistd.h>
#include <asm/user32.h>
#include <asm/sigcontext32.h>
#include <asm/proto.h>
#include <asm/vdso.h>
-
#include <asm/sigframe.h>
+#include <asm/sys_ia32.h>
#define DEBUG_SIG 0
#include <linux/shm.h>
#include <linux/ipc.h>
#include <linux/compat.h>
+#include <asm/sys_ia32.h>
asmlinkage long sys32_ipc(u32 call, int first, int second, int third,
compat_uptr_t ptr, u32 fifth)
#include <asm/types.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
-#include <asm/ia32.h>
#include <asm/vgtod.h>
+#include <asm/sys_ia32.h>
#define AA(__x) ((unsigned long)(__x))
extern int is_vsmp_box(void);
extern void xapic_wait_icr_idle(void);
extern u32 safe_xapic_wait_icr_idle(void);
-extern u64 xapic_icr_read(void);
extern void xapic_icr_write(u32, u32);
extern int setup_profiling_timer(unsigned int);
}
#ifndef CONFIG_X86_32
-extern int x2apic, x2apic_preenabled;
+extern int x2apic;
extern void check_x2apic(void);
extern void enable_x2apic(void);
extern void enable_IR_x2apic(void);
#endif /* CONFIG_X86_32 */
+extern int add_efi_memmap;
extern void efi_reserve_early(void);
extern void efi_call_phys_prelog(void);
extern void efi_call_phys_epilog(void);
#include <asm/mpspec_def.h>
extern int apic_version[MAX_APICS];
+extern int pic_mode;
#ifdef CONFIG_X86_32
#include <mach_mpspec.h>
extern unsigned int def_to_bigsmp;
extern u8 apicid_2_node[];
-extern int pic_mode;
#ifdef CONFIG_X86_NUMAQ
extern int mp_bus_id_to_node[MAX_MP_BUSSES];
--- /dev/null
+/*
+ * Low-Level PCI Access for i386 machines.
+ *
+ * (c) 1999 Martin Mares <mj@ucw.cz>
+ */
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+#define PCI_PROBE_BIOS 0x0001
+#define PCI_PROBE_CONF1 0x0002
+#define PCI_PROBE_CONF2 0x0004
+#define PCI_PROBE_MMCONF 0x0008
+#define PCI_PROBE_MASK 0x000f
+#define PCI_PROBE_NOEARLY 0x0010
+
+#define PCI_NO_CHECKS 0x0400
+#define PCI_USE_PIRQ_MASK 0x0800
+#define PCI_ASSIGN_ROMS 0x1000
+#define PCI_BIOS_IRQ_SCAN 0x2000
+#define PCI_ASSIGN_ALL_BUSSES 0x4000
+#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
+#define PCI_USE__CRS 0x10000
+#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
+#define PCI_HAS_IO_ECS 0x40000
+#define PCI_NOASSIGN_ROMS 0x80000
+
+extern unsigned int pci_probe;
+extern unsigned long pirq_table_addr;
+
+enum pci_bf_sort_state {
+ pci_bf_sort_default,
+ pci_force_nobf,
+ pci_force_bf,
+ pci_dmi_bf,
+};
+
+/* pci-i386.c */
+
+extern unsigned int pcibios_max_latency;
+
+void pcibios_resource_survey(void);
+
+/* pci-pc.c */
+
+extern int pcibios_last_bus;
+extern struct pci_bus *pci_root_bus;
+extern struct pci_ops pci_root_ops;
+
+/* pci-irq.c */
+
+struct irq_info {
+ u8 bus, devfn; /* Bus, device and function */
+ struct {
+ u8 link; /* IRQ line ID, chipset dependent,
+ 0 = not routed */
+ u16 bitmap; /* Available IRQs */
+ } __attribute__((packed)) irq[4];
+ u8 slot; /* Slot number, 0=onboard */
+ u8 rfu;
+} __attribute__((packed));
+
+struct irq_routing_table {
+ u32 signature; /* PIRQ_SIGNATURE should be here */
+ u16 version; /* PIRQ_VERSION */
+ u16 size; /* Table size in bytes */
+ u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
+ u16 exclusive_irqs; /* IRQs devoted exclusively to
+ PCI usage */
+ u16 rtr_vendor, rtr_device; /* Vendor and device ID of
+ interrupt router */
+ u32 miniport_data; /* Crap */
+ u8 rfu[11];
+ u8 checksum; /* Modulo 256 checksum must give 0 */
+ struct irq_info slots[0];
+} __attribute__((packed));
+
+extern unsigned int pcibios_irq_mask;
+
+extern int pcibios_scanned;
+extern spinlock_t pci_config_lock;
+
+extern int (*pcibios_enable_irq)(struct pci_dev *dev);
+extern void (*pcibios_disable_irq)(struct pci_dev *dev);
+
+struct pci_raw_ops {
+ int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
+ int reg, int len, u32 *val);
+ int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
+ int reg, int len, u32 val);
+};
+
+extern struct pci_raw_ops *raw_pci_ops;
+extern struct pci_raw_ops *raw_pci_ext_ops;
+
+extern struct pci_raw_ops pci_direct_conf1;
+extern bool port_cf9_safe;
+
+/* arch_initcall level */
+extern int pci_direct_probe(void);
+extern void pci_direct_init(int type);
+extern void pci_pcbios_init(void);
+extern int pci_olpc_init(void);
+extern void __init dmi_check_pciprobe(void);
+extern void __init dmi_check_skip_isa_align(void);
+
+/* some common used subsys_initcalls */
+extern int __init pci_acpi_init(void);
+extern int __init pcibios_irq_init(void);
+extern int __init pci_visws_init(void);
+extern int __init pci_numaq_init(void);
+extern int __init pcibios_init(void);
+
+/* pci-mmconfig.c */
+
+extern int __init pci_mmcfg_arch_init(void);
+extern void __init pci_mmcfg_arch_free(void);
+
+/*
+ * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
+ * on their northbrige except through the * %eax register. As such, you MUST
+ * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
+ * accessor functions.
+ * In fact just use pci_config_*, nothing else please.
+ */
+static inline unsigned char mmio_config_readb(void __iomem *pos)
+{
+ u8 val;
+ asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
+ return val;
+}
+
+static inline unsigned short mmio_config_readw(void __iomem *pos)
+{
+ u16 val;
+ asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
+ return val;
+}
+
+static inline unsigned int mmio_config_readl(void __iomem *pos)
+{
+ u32 val;
+ asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
+ return val;
+}
+
+static inline void mmio_config_writeb(void __iomem *pos, u8 val)
+{
+ asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writew(void __iomem *pos, u16 val)
+{
+ asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
+
+static inline void mmio_config_writel(void __iomem *pos, u32 val)
+{
+ asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
+}
--- /dev/null
+/*
+ * sys_ia32.h - Linux ia32 syscall interfaces
+ *
+ * Copyright (c) 2008 Jaswinder Singh Rajput
+ *
+ * This file is released under the GPLv2.
+ * See the file COPYING for more details.
+ */
+
+#ifndef _ASM_X86_SYS_IA32_H
+#define _ASM_X86_SYS_IA32_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <asm/compat.h>
+#include <asm/ia32.h>
+
+/* ia32/sys_ia32.c */
+asmlinkage long sys32_truncate64(char __user *, unsigned long, unsigned long);
+asmlinkage long sys32_ftruncate64(unsigned int, unsigned long, unsigned long);
+
+asmlinkage long sys32_stat64(char __user *, struct stat64 __user *);
+asmlinkage long sys32_lstat64(char __user *, struct stat64 __user *);
+asmlinkage long sys32_fstat64(unsigned int, struct stat64 __user *);
+asmlinkage long sys32_fstatat(unsigned int, char __user *,
+ struct stat64 __user *, int);
+struct mmap_arg_struct;
+asmlinkage long sys32_mmap(struct mmap_arg_struct __user *);
+asmlinkage long sys32_mprotect(unsigned long, size_t, unsigned long);
+
+asmlinkage long sys32_pipe(int __user *);
+struct sigaction32;
+struct old_sigaction32;
+asmlinkage long sys32_rt_sigaction(int, struct sigaction32 __user *,
+ struct sigaction32 __user *, unsigned int);
+asmlinkage long sys32_sigaction(int, struct old_sigaction32 __user *,
+ struct old_sigaction32 __user *);
+asmlinkage long sys32_rt_sigprocmask(int, compat_sigset_t __user *,
+ compat_sigset_t __user *, unsigned int);
+asmlinkage long sys32_alarm(unsigned int);
+
+struct sel_arg_struct;
+asmlinkage long sys32_old_select(struct sel_arg_struct __user *);
+asmlinkage long sys32_waitpid(compat_pid_t, unsigned int *, int);
+asmlinkage long sys32_sysfs(int, u32, u32);
+
+asmlinkage long sys32_sched_rr_get_interval(compat_pid_t,
+ struct compat_timespec __user *);
+asmlinkage long sys32_rt_sigpending(compat_sigset_t __user *, compat_size_t);
+asmlinkage long sys32_rt_sigqueueinfo(int, int, compat_siginfo_t __user *);
+
+#ifdef CONFIG_SYSCTL_SYSCALL
+struct sysctl_ia32;
+asmlinkage long sys32_sysctl(struct sysctl_ia32 __user *);
+#endif
+
+asmlinkage long sys32_pread(unsigned int, char __user *, u32, u32, u32);
+asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32);
+
+asmlinkage long sys32_personality(unsigned long);
+asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32);
+
+asmlinkage long sys32_mmap2(unsigned long, unsigned long, unsigned long,
+ unsigned long, unsigned long, unsigned long);
+
+struct oldold_utsname;
+struct old_utsname;
+asmlinkage long sys32_olduname(struct oldold_utsname __user *);
+long sys32_uname(struct old_utsname __user *);
+
+long sys32_ustat(unsigned, struct ustat32 __user *);
+
+asmlinkage long sys32_execve(char __user *, compat_uptr_t __user *,
+ compat_uptr_t __user *, struct pt_regs *);
+asmlinkage long sys32_clone(unsigned int, unsigned int, struct pt_regs *);
+
+long sys32_lseek(unsigned int, int, unsigned int);
+long sys32_kill(int, int);
+long sys32_fadvise64_64(int, __u32, __u32, __u32, __u32, int);
+long sys32_vm86_warning(void);
+long sys32_lookup_dcookie(u32, u32, char __user *, size_t);
+
+asmlinkage ssize_t sys32_readahead(int, unsigned, unsigned, size_t);
+asmlinkage long sys32_sync_file_range(int, unsigned, unsigned,
+ unsigned, unsigned, int);
+asmlinkage long sys32_fadvise64(int, unsigned, unsigned, size_t, int);
+asmlinkage long sys32_fallocate(int, int, unsigned,
+ unsigned, unsigned, unsigned);
+
+/* ia32/ia32_signal.c */
+asmlinkage long sys32_sigsuspend(int, int, old_sigset_t);
+asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *,
+ stack_ia32_t __user *, struct pt_regs *);
+asmlinkage long sys32_sigreturn(struct pt_regs *);
+asmlinkage long sys32_rt_sigreturn(struct pt_regs *);
+
+/* ia32/ipc32.c */
+asmlinkage long sys32_ipc(u32, int, int, int, compat_uptr_t, u32);
+#endif /* _ASM_X86_SYS_IA32_H */
* see table 4.2.3.0.1 in broacast_assist spec.
*/
struct bau_msg_header {
- int dest_subnodeid:6; /* must be zero */
+ unsigned int dest_subnodeid:6; /* must be zero */
/* bits 5:0 */
- int base_dest_nodeid:15; /* nasid>>1 (pnode) of first bit in node_map */
- /* bits 20:6 */
- int command:8; /* message type */
+ unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
+ /* bits 20:6 */ /* first bit in node_map */
+ unsigned int command:8; /* message type */
/* bits 28:21 */
/* 0x38: SN3net EndPoint Message */
- int rsvd_1:3; /* must be zero */
+ unsigned int rsvd_1:3; /* must be zero */
/* bits 31:29 */
/* int will align on 32 bits */
- int rsvd_2:9; /* must be zero */
+ unsigned int rsvd_2:9; /* must be zero */
/* bits 40:32 */
/* Suppl_A is 56-41 */
- int payload_2a:8; /* becomes byte 16 of msg */
+ unsigned int payload_2a:8;/* becomes byte 16 of msg */
/* bits 48:41 */ /* not currently using */
- int payload_2b:8; /* becomes byte 17 of msg */
+ unsigned int payload_2b:8;/* becomes byte 17 of msg */
/* bits 56:49 */ /* not currently using */
/* Address field (96:57) is never used as an
address (these are address bits 42:3) */
- int rsvd_3:1; /* must be zero */
+ unsigned int rsvd_3:1; /* must be zero */
/* bit 57 */
/* address bits 27:4 are payload */
/* these 24 bits become bytes 12-14 of msg */
- int replied_to:1; /* sent as 0 by the source to byte 12 */
+ unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */
/* bit 58 */
- int payload_1a:5; /* not currently used */
+ unsigned int payload_1a:5;/* not currently used */
/* bits 63:59 */
- int payload_1b:8; /* not currently used */
+ unsigned int payload_1b:8;/* not currently used */
/* bits 71:64 */
- int payload_1c:8; /* not currently used */
+ unsigned int payload_1c:8;/* not currently used */
/* bits 79:72 */
- int payload_1d:2; /* not currently used */
+ unsigned int payload_1d:2;/* not currently used */
/* bits 81:80 */
- int rsvd_4:7; /* must be zero */
+ unsigned int rsvd_4:7; /* must be zero */
/* bits 88:82 */
- int sw_ack_flag:1; /* software acknowledge flag */
+ unsigned int sw_ack_flag:1;/* software acknowledge flag */
/* bit 89 */
/* INTD trasactions at destination are to
wait for software acknowledge */
- int rsvd_5:6; /* must be zero */
+ unsigned int rsvd_5:6; /* must be zero */
/* bits 95:90 */
- int rsvd_6:5; /* must be zero */
+ unsigned int rsvd_6:5; /* must be zero */
/* bits 100:96 */
- int int_both:1; /* if 1, interrupt both sockets on the blade */
+ unsigned int int_both:1;/* if 1, interrupt both sockets on the blade */
/* bit 101*/
- int fairness:3; /* usually zero */
+ unsigned int fairness:3;/* usually zero */
/* bits 104:102 */
- int multilevel:1; /* multi-level multicast format */
+ unsigned int multilevel:1; /* multi-level multicast format */
/* bit 105 */
/* 0 for TLB: endpoint multi-unicast messages */
- int chaining:1; /* next descriptor is part of this activation*/
+ unsigned int chaining:1;/* next descriptor is part of this activation*/
/* bit 106 */
- int rsvd_7:21; /* must be zero */
+ unsigned int rsvd_7:21; /* must be zero */
/* bits 127:107 */
};
* we don't need to preallocate the protection domains anymore.
* For now we have to.
*/
-void prealloc_protection_domains(void)
+static void prealloc_protection_domains(void)
{
struct pci_dev *dev = NULL;
struct dma_ops_domain *dma_dom;
}
/* Function to enable the hardware */
-void __init iommu_enable(struct amd_iommu *iommu)
+static void __init iommu_enable(struct amd_iommu *iommu)
{
printk(KERN_INFO "AMD IOMMU: Enabling IOMMU "
"at %02x:%02x.%x cap 0x%hx\n",
}
/* Function to enable IOMMU event logging and event interrupts */
-void __init iommu_enable_event_logging(struct amd_iommu *iommu)
+static void __init iommu_enable_event_logging(struct amd_iommu *iommu)
{
iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
iommu_feature_enable(iommu, CONTROL_EVT_INT_EN);
#ifdef HAVE_X2APIC
int x2apic;
/* x2apic enabled before OS handover */
-int x2apic_preenabled;
-int disable_x2apic;
+static int x2apic_preenabled;
+static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
disable_x2apic = 1;
apic_write(APIC_ICR, low);
}
-u64 xapic_icr_read(void)
+static u64 xapic_icr_read(void)
{
u32 icr1, icr2;
wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
}
-u64 x2apic_icr_read(void)
+static u64 x2apic_icr_read(void)
{
unsigned long val;
#include <asm/uv/bios.h>
#include <asm/uv/uv_hub.h>
-struct uv_systab uv_systab;
+static struct uv_systab uv_systab;
s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5)
{
static int __init disable_mtrr_cleanup_setup(char *str)
{
- if (enable_mtrr_cleanup != -1)
- enable_mtrr_cleanup = 0;
+ enable_mtrr_cleanup = 0;
return 0;
}
early_param("disable_mtrr_cleanup", disable_mtrr_cleanup_setup);
static int __init enable_mtrr_cleanup_setup(char *str)
{
- if (enable_mtrr_cleanup != -1)
- enable_mtrr_cleanup = 1;
+ enable_mtrr_cleanup = 1;
return 0;
}
early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup);
#include <linux/device.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
+#include <linux/uaccess.h>
#include <asm/processor.h>
#include <asm/msr.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
static struct class *cpuid_class;
}
static ssize_t cpuid_read(struct file *file, char __user *buf,
- size_t count, loff_t * ppos)
+ size_t count, loff_t *ppos)
{
char __user *tmp = buf;
struct cpuid_regs cmd;
unsigned int cpu;
struct cpuinfo_x86 *c;
int ret = 0;
-
+
lock_kernel();
cpu = iminor(file->f_path.dentry->d_inode);
va_list ap;
va_start(ap, fmt);
- n = vscnprintf(buf, 512, fmt, ap);
+ n = vscnprintf(buf, sizeof(buf), fmt, ap);
early_console->write(early_console, buf, n);
va_end(ap);
}
return current_cpu_data.initial_apicid >> index_msb;
}
-void x2apic_send_IPI_self(int vector)
+static void x2apic_send_IPI_self(int vector)
{
apic_write(APIC_SELF_IPI, vector);
}
-void init_x2apic_ldr(void)
+static void init_x2apic_ldr(void)
{
return;
}
}
#ifdef CONFIG_X86_64
-void io_apic_sync(struct irq_pin_list *entry)
+static void io_apic_sync(struct irq_pin_list *entry)
{
/*
* Synchronize the IO-APIC and the CPU by doing
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/vmalloc.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/ldt.h>
#include <asm/desc.h>
if (err < 0)
return err;
- for(i = 0; i < old->size; i++)
+ for (i = 0; i < old->size; i++)
write_ldt_entry(new->ldt, i, old->ldt + i * LDT_ENTRY_SIZE);
return 0;
}
#include <asm/msr.h>
#include <asm/acpi.h>
#include <asm/mmconfig.h>
-
-#include "../pci/pci.h"
+#include <asm/pci_x86.h>
struct pci_hostbridge_probe {
u32 bus;
#include <linux/bitops.h>
#include <linux/acpi.h>
#include <linux/module.h>
+#include <linux/smp.h>
+#include <linux/acpi.h>
-#include <asm/smp.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
#include <asm/pgalloc.h>
#include <asm/io_apic.h>
#include <asm/proto.h>
-#include <asm/acpi.h>
#include <asm/bios_ebda.h>
#include <asm/e820.h>
#include <asm/trampoline.h>
#endif
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
- set_bit(m->mpc_busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
+ set_bit(m->mpc_busid, mp_bus_not_pci);
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
#endif
} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
x86_quirks->mpc_oem_pci_bus(m);
clear_bit(m->mpc_busid, mp_bus_not_pci);
-#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
#include <linux/kernel_stat.h>
#include <linux/kdebug.h>
#include <linux/smp.h>
+#include <linux/nmi.h>
#include <asm/i8259.h>
#include <asm/io_apic.h>
-#include <asm/smp.h>
-#include <asm/nmi.h>
#include <asm/proto.h>
#include <asm/timer.h>
* to trigger bugs with some popular PCI cards, in particular 3ware (but
* has been also also seen with Qlogic at least).
*/
-int iommu_fullflush = 1;
+static int iommu_fullflush = 1;
/* Allocation bitmap for the remapping area: */
static DEFINE_SPINLOCK(iommu_bitmap_lock);
#include <asm/proto.h>
#include <asm/reboot_fixups.h>
#include <asm/reboot.h>
+#include <asm/pci_x86.h>
#include <asm/virtext.h>
#ifdef CONFIG_X86_32
#include <mach_ipi.h>
-
/*
* Power off function, if any
*/
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 8;
- /* This is always a kernel trap and never fixable (and thus must
- never return). */
+ /*
+ * This is always a kernel trap and never fixable (and thus must
+ * never return).
+ */
for (;;)
die(str, regs, error_code);
}
}
#ifdef CONFIG_X86_64
-/* Help handler running on IST stack to switch back to user stack
- for scheduling or signal handling. The actual stack switch is done in
- entry.S */
+/*
+ * Help handler running on IST stack to switch back to user stack
+ * for scheduling or signal handling. The actual stack switch is done in
+ * entry.S
+ */
asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
{
struct pt_regs *regs = eregs;
/* Exception from user space */
else if (user_mode(eregs))
regs = task_pt_regs(current);
- /* Exception from kernel and interrupts are enabled. Move to
- kernel process stack. */
+ /*
+ * Exception from kernel and interrupts are enabled. Move to
+ * kernel process stack.
+ */
else if (eregs->flags & X86_EFLAGS_IF)
regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
if (eregs != regs)
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
- err = swd & ~cwd & 0x3f;
-
-#ifdef CONFIG_X86_32
- if (!err)
- return;
-#endif
+ err = swd & ~cwd;
if (err & 0x001) { /* Invalid op */
/*
} else if (err & 0x020) { /* Precision */
info.si_code = FPE_FLTRES;
} else {
- info.si_code = __SI_FAULT|SI_KERNEL; /* WTF? */
+ /*
+ * If we're using IRQ 13, or supposedly even some trap 16
+ * implementations, it's possible we get a spurious trap...
+ */
+ return; /* Spurious trap, no error */
}
force_sig_info(SIGFPE, &info, task);
}
* Restore the extended state if present. Otherwise, restore the FP/SSE
* state.
*/
-int restore_user_xstate(void __user *buf)
+static int restore_user_xstate(void __user *buf)
{
struct _fpx_sw_bytes fx_sw_user;
u64 mask;
**/
void mca_nmi_hook(void)
{
- /* If I recall correctly, there's a whole bunch of other things that
+ /*
+ * If I recall correctly, there's a whole bunch of other things that
* we can do to check for NMI problems, but that's all I know about
* at the moment.
*/
-
- printk("NMI generated from unknown source!\n");
+ pr_warning("NMI generated from unknown source!\n");
}
#endif
static __init int no_ipi_broadcast(char *str)
{
get_option(&str, &no_broadcast);
- printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
- "IPI Broadcast");
+ pr_info("Using %s mode\n",
+ no_broadcast ? "No IPI Broadcast" : "IPI Broadcast");
return 1;
}
-
__setup("no_ipi_broadcast=", no_ipi_broadcast);
static int __init print_ipi_mode(void)
{
- printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
- "Shortcut");
+ pr_info("Using IPI %s mode\n",
+ no_broadcast ? "No-Shortcut" : "Shortcut");
return 0;
}
#include <linux/irq.h>
#include <linux/dmi.h>
#include <asm/numa.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
struct pci_root_info {
char *name;
#include <linux/pci.h>
#include <linux/topology.h>
#include <linux/cpu.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
#ifdef CONFIG_X86_64
#include <asm/pci-direct.h>
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/smp.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/dmi.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* Functions for accessing PCI base (first 256 bytes) and extended
#include <linux/pci.h>
#include <asm/pci-direct.h>
#include <asm/io.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Direct PCI access. This is used for PCI accesses in early boot before
the PCI subsystem works. */
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include "pci.h"
-
+#include <asm/pci_x86.h>
static void __devinit pci_fixup_i450nx(struct pci_dev *d)
{
#include <asm/pat.h>
#include <asm/e820.h>
+#include <asm/pci_x86.h>
-#include "pci.h"
static int
skip_isa_ioresource_align(struct pci_dev *dev) {
#include <linux/pci.h>
#include <linux/init.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* arch_initcall has too random ordering, so call the initializers
in the right sequence from here. */
#include <asm/io_apic.h>
#include <linux/irq.h>
#include <linux/acpi.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
#define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24))
#define PIRQ_VERSION 0x0100
*/
#include <linux/init.h>
#include <linux/pci.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* Discover remaining PCI buses in case there are peer host bridges.
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#include <linux/init.h>
#include <linux/acpi.h>
#include <asm/e820.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Assume systems with more busses have correct MCFG */
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <asm/e820.h>
-
-#include "pci.h"
+#include <asm/pci_x86.h>
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
#include <linux/nodemask.h>
#include <mach_apic.h>
#include <asm/mpspec.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
#define XQUAD_PORTIO_BASE 0xfe400000
#define XQUAD_PORTIO_QUAD 0x40000 /* 256k per quad. */
#include <linux/init.h>
#include <asm/olpc.h>
#include <asm/geode.h>
-#include "pci.h"
+#include <asm/pci_x86.h>
/*
* In the tables below, the first two line (8 longwords) are the
#include <linux/init.h>
#include <linux/module.h>
#include <linux/uaccess.h>
-#include "pci.h"
-#include "pci-functions.h"
-
+#include <asm/pci_x86.h>
+#include <asm/mach-default/pci-functions.h>
/* BIOS32 signature: "_32_" */
#define BIOS32_SIGNATURE (('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
+++ /dev/null
-/*
- * Low-Level PCI Access for i386 machines.
- *
- * (c) 1999 Martin Mares <mj@ucw.cz>
- */
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-#define PCI_PROBE_BIOS 0x0001
-#define PCI_PROBE_CONF1 0x0002
-#define PCI_PROBE_CONF2 0x0004
-#define PCI_PROBE_MMCONF 0x0008
-#define PCI_PROBE_MASK 0x000f
-#define PCI_PROBE_NOEARLY 0x0010
-
-#define PCI_NO_CHECKS 0x0400
-#define PCI_USE_PIRQ_MASK 0x0800
-#define PCI_ASSIGN_ROMS 0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-#define PCI_ASSIGN_ALL_BUSSES 0x4000
-#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
-#define PCI_USE__CRS 0x10000
-#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
-#define PCI_HAS_IO_ECS 0x40000
-#define PCI_NOASSIGN_ROMS 0x80000
-
-extern unsigned int pci_probe;
-extern unsigned long pirq_table_addr;
-
-enum pci_bf_sort_state {
- pci_bf_sort_default,
- pci_force_nobf,
- pci_force_bf,
- pci_dmi_bf,
-};
-
-/* pci-i386.c */
-
-extern unsigned int pcibios_max_latency;
-
-void pcibios_resource_survey(void);
-
-/* pci-pc.c */
-
-extern int pcibios_last_bus;
-extern struct pci_bus *pci_root_bus;
-extern struct pci_ops pci_root_ops;
-
-/* pci-irq.c */
-
-struct irq_info {
- u8 bus, devfn; /* Bus, device and function */
- struct {
- u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
- u16 bitmap; /* Available IRQs */
- } __attribute__((packed)) irq[4];
- u8 slot; /* Slot number, 0=onboard */
- u8 rfu;
-} __attribute__((packed));
-
-struct irq_routing_table {
- u32 signature; /* PIRQ_SIGNATURE should be here */
- u16 version; /* PIRQ_VERSION */
- u16 size; /* Table size in bytes */
- u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
- u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
- u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
- u32 miniport_data; /* Crap */
- u8 rfu[11];
- u8 checksum; /* Modulo 256 checksum must give zero */
- struct irq_info slots[0];
-} __attribute__((packed));
-
-extern unsigned int pcibios_irq_mask;
-
-extern int pcibios_scanned;
-extern spinlock_t pci_config_lock;
-
-extern int (*pcibios_enable_irq)(struct pci_dev *dev);
-extern void (*pcibios_disable_irq)(struct pci_dev *dev);
-
-struct pci_raw_ops {
- int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
- int reg, int len, u32 *val);
- int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
- int reg, int len, u32 val);
-};
-
-extern struct pci_raw_ops *raw_pci_ops;
-extern struct pci_raw_ops *raw_pci_ext_ops;
-
-extern struct pci_raw_ops pci_direct_conf1;
-extern bool port_cf9_safe;
-
-/* arch_initcall level */
-extern int pci_direct_probe(void);
-extern void pci_direct_init(int type);
-extern void pci_pcbios_init(void);
-extern int pci_olpc_init(void);
-extern void __init dmi_check_pciprobe(void);
-extern void __init dmi_check_skip_isa_align(void);
-
-/* some common used subsys_initcalls */
-extern int __init pci_acpi_init(void);
-extern int __init pcibios_irq_init(void);
-extern int __init pci_visws_init(void);
-extern int __init pci_numaq_init(void);
-extern int __init pcibios_init(void);
-
-/* pci-mmconfig.c */
-
-extern int __init pci_mmcfg_arch_init(void);
-extern void __init pci_mmcfg_arch_free(void);
-
-/*
- * AMD Fam10h CPUs are buggy, and cannot access MMIO config space
- * on their northbrige except through the * %eax register. As such, you MUST
- * NOT use normal IOMEM accesses, you need to only use the magic mmio-config
- * accessor functions.
- * In fact just use pci_config_*, nothing else please.
- */
-static inline unsigned char mmio_config_readb(void __iomem *pos)
-{
- u8 val;
- asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
- return val;
-}
-
-static inline unsigned short mmio_config_readw(void __iomem *pos)
-{
- u16 val;
- asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
- return val;
-}
-
-static inline unsigned int mmio_config_readl(void __iomem *pos)
-{
- u32 val;
- asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
- return val;
-}
-
-static inline void mmio_config_writeb(void __iomem *pos, u8 val)
-{
- asm volatile("movb %%al,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writew(void __iomem *pos, u16 val)
-{
- asm volatile("movw %%ax,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
-
-static inline void mmio_config_writel(void __iomem *pos, u32 val)
-{
- asm volatile("movl %%eax,(%1)" :: "a" (val), "r" (pos) : "memory");
-}
#include <linux/init.h>
#include <asm/setup.h>
+#include <asm/pci_x86.h>
#include <asm/visws/cobalt.h>
#include <asm/visws/lithium.h>
-#include "pci.h"
-
static int pci_visws_enable_irq(struct pci_dev *dev) { return 0; }
static void pci_visws_disable_irq(struct pci_dev *dev) { }
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
/* Global variables */
#include "../pci.h"
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include "../../../arch/x86/pci/pci.h" /* horrible hack showing how processor dependent we are... */
+#include <asm/pci_x86.h>
u8 cpqhp_nic_irq;
#include <linux/delay.h>
#include <linux/wait.h>
#include "../pci.h"
-#include "../../../arch/x86/pci/pci.h" /* for struct irq_routing_table */
+#include <asm/pci_x86.h> /* for struct irq_routing_table */
#include "ibmphp.h"
#define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON)
projects / linux-2.6-block.git / commitdiff