V4L/DVB (4961): Add support for the ASUS P7131 remote control
authorHermann Pitton <hermann-pitton@arcor.de>
Fri, 8 Dec 2006 00:45:28 +0000 (21:45 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Wed, 21 Feb 2007 15:34:12 +0000 (13:34 -0200)
Besides adding the board specific code, this patch moves
the RC5 decoding code from bt8xx to ir-functions.c to make it available
for all drivers.

Signed-off-by: Marc Fargas <telenieko.telenieko.com>
Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/common/ir-functions.c
drivers/media/common/ir-keymaps.c
drivers/media/video/bt8xx/bttv-input.c
drivers/media/video/bt8xx/bttv.h
drivers/media/video/bt8xx/bttvp.h
drivers/media/video/saa7134/saa7134-cards.c
drivers/media/video/saa7134/saa7134-input.c
drivers/media/video/saa7134/saa7134.h
include/media/ir-common.h

index 9a8dd8764c99df188e4bb7857282eea6b8a9746c..cbf7c05648896776e4a60b1bfd01c83956730051 100644 (file)
@@ -256,6 +256,112 @@ int ir_decode_biphase(u32 *samples, int count, int low, int high)
        return value;
 }
 
+/* RC5 decoding stuff, moved from bttv-input.c to share it with
+ * saa7134 */
+
+/* decode raw bit pattern to RC5 code */
+u32 ir_rc5_decode(unsigned int code)
+{
+       unsigned int org_code = code;
+       unsigned int pair;
+       unsigned int rc5 = 0;
+       int i;
+
+       for (i = 0; i < 14; ++i) {
+               pair = code & 0x3;
+               code >>= 2;
+
+               rc5 <<= 1;
+               switch (pair) {
+               case 0:
+               case 2:
+                       break;
+               case 1:
+                       rc5 |= 1;
+                       break;
+               case 3:
+                       dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
+                       return 0;
+               }
+       }
+       dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+               "instr=%x\n", rc5, org_code, RC5_START(rc5),
+               RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+       return rc5;
+}
+
+void ir_rc5_timer_end(unsigned long data)
+{
+       struct card_ir *ir = (struct card_ir *)data;
+       struct timeval tv;
+       unsigned long current_jiffies, timeout;
+       u32 gap;
+       u32 rc5 = 0;
+
+       /* get time */
+       current_jiffies = jiffies;
+       do_gettimeofday(&tv);
+
+       /* avoid overflow with gap >1s */
+       if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+               gap = 200000;
+       } else {
+               gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+                   tv.tv_usec - ir->base_time.tv_usec;
+       }
+
+       /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
+       if (gap < 28000) {
+               dprintk(1, "ir-common: spurious timer_end\n");
+               return;
+       }
+
+       ir->active = 0;
+       if (ir->last_bit < 20) {
+               /* ignore spurious codes (caused by light/other remotes) */
+               dprintk(1, "ir-common: short code: %x\n", ir->code);
+       } else {
+               ir->code = (ir->code << ir->shift_by) | 1;
+               rc5 = ir_rc5_decode(ir->code);
+
+               /* two start bits? */
+               if (RC5_START(rc5) != ir->start) {
+                       dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+                       /* right address? */
+               } else if (RC5_ADDR(rc5) == ir->addr) {
+                       u32 toggle = RC5_TOGGLE(rc5);
+                       u32 instr = RC5_INSTR(rc5);
+
+                       /* Good code, decide if repeat/repress */
+                       if (toggle != RC5_TOGGLE(ir->last_rc5) ||
+                           instr != RC5_INSTR(ir->last_rc5)) {
+                               dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
+                                       toggle);
+                               ir_input_nokey(ir->dev, &ir->ir);
+                               ir_input_keydown(ir->dev, &ir->ir, instr,
+                                                instr);
+                       }
+
+                       /* Set/reset key-up timer */
+                       timeout = current_jiffies + (500 + ir->rc5_key_timeout
+                                                    * HZ) / 1000;
+                       mod_timer(&ir->timer_keyup, timeout);
+
+                       /* Save code for repeat test */
+                       ir->last_rc5 = rc5;
+               }
+       }
+}
+
+void ir_rc5_timer_keyup(unsigned long data)
+{
+       struct card_ir *ir = (struct card_ir *)data;
+
+       dprintk(1, "ir-common: key released\n");
+       ir_input_nokey(ir->dev, &ir->ir);
+}
+
 EXPORT_SYMBOL_GPL(ir_input_init);
 EXPORT_SYMBOL_GPL(ir_input_nokey);
 EXPORT_SYMBOL_GPL(ir_input_keydown);
@@ -265,6 +371,10 @@ EXPORT_SYMBOL_GPL(ir_dump_samples);
 EXPORT_SYMBOL_GPL(ir_decode_biphase);
 EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
 
+EXPORT_SYMBOL_GPL(ir_rc5_decode);
+EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
+EXPORT_SYMBOL_GPL(ir_rc5_timer_keyup);
+
 /*
  * Local variables:
  * c-basic-offset: 8
index 0e948a5c5a03481d56cefc9844db22a6590c4592..4a54a559d81cbdf302c045ddbd70d2954f377165 100644 (file)
@@ -1606,3 +1606,57 @@ IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE] = {
 };
 
 EXPORT_SYMBOL_GPL(ir_codes_budget_ci_old);
+
+/*
+ * Marc Fargas <telenieko@telenieko.com>
+ * this is the remote control that comes with the asus p7131
+ * which has a label saying is "Model PC-39"
+ */
+IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE] = {
+       /* Keys 0 to 9 */
+       [ 0x15 ] = KEY_0,
+       [ 0x29 ] = KEY_1,
+       [ 0x2d ] = KEY_2,
+       [ 0x2b ] = KEY_3,
+       [ 0x09 ] = KEY_4,
+       [ 0x0d ] = KEY_5,
+       [ 0x0b ] = KEY_6,
+       [ 0x31 ] = KEY_7,
+       [ 0x35 ] = KEY_8,
+       [ 0x33 ] = KEY_9,
+
+       [ 0x3e ] = KEY_RADIO,           /* radio */
+       [ 0x03 ] = KEY_MENU,            /* dvd/menu */
+       [ 0x2a ] = KEY_VOLUMEUP,
+       [ 0x19 ] = KEY_VOLUMEDOWN,
+       [ 0x37 ] = KEY_UP,
+       [ 0x3b ] = KEY_DOWN,
+       [ 0x27 ] = KEY_LEFT,
+       [ 0x2f ] = KEY_RIGHT,
+       [ 0x25 ] = KEY_VIDEO,           /* video */
+       [ 0x39 ] = KEY_AUDIO,           /* music */
+
+       [ 0x21 ] = KEY_TV,              /* tv */
+       [ 0x1d ] = KEY_EXIT,            /* back */
+       [ 0x0a ] = KEY_CHANNELUP,       /* channel / program + */
+       [ 0x1b ] = KEY_CHANNELDOWN,     /* channel / program - */
+       [ 0x1a ] = KEY_ENTER,           /* enter */
+
+       [ 0x06 ] = KEY_PAUSE,           /* play/pause */
+       [ 0x1e ] = KEY_PREVIOUS,        /* rew */
+       [ 0x26 ] = KEY_NEXT,            /* forward */
+       [ 0x0e ] = KEY_REWIND,          /* backward << */
+       [ 0x3a ] = KEY_FASTFORWARD,     /* forward >> */
+       [ 0x36 ] = KEY_STOP,
+       [ 0x2e ] = KEY_RECORD,          /* recording */
+       [ 0x16 ] = KEY_POWER,           /* the button that reads "close" */
+
+       [ 0x11 ] = KEY_ZOOM,            /* full screen */
+       [ 0x13 ] = KEY_MACRO,           /* recall */
+       [ 0x23 ] = KEY_HOME,            /* home */
+       [ 0x05 ] = KEY_PVR,             /* picture */
+       [ 0x3d ] = KEY_MUTE,            /* mute */
+       [ 0x01 ] = KEY_DVD,             /* dvd */
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_asus_pc39);
index cbc012f71f5269e7b570195139ca88f426710286..14c07c6066320a696041a7aa5c93b69865fd477f 100644 (file)
@@ -36,13 +36,18 @@ module_param(repeat_delay, int, 0644);
 static int repeat_period = 33;
 module_param(repeat_period, int, 0644);
 
+int ir_rc5_remote_gap = 885;
+module_param(ir_rc5_remote_gap, int, 0644);
+int ir_rc5_key_timeout = 200;
+module_param(ir_rc5_key_timeout, int, 0644);
+
 #define DEVNAME "bttv-input"
 
 /* ---------------------------------------------------------------------- */
 
 static void ir_handle_key(struct bttv *btv)
 {
-       struct bttv_ir *ir = btv->remote;
+       struct card_ir *ir = btv->remote;
        u32 gpio,data;
 
        /* read gpio value */
@@ -72,7 +77,7 @@ static void ir_handle_key(struct bttv *btv)
 
 void bttv_input_irq(struct bttv *btv)
 {
-       struct bttv_ir *ir = btv->remote;
+       struct card_ir *ir = btv->remote;
 
        if (!ir->polling)
                ir_handle_key(btv);
@@ -81,7 +86,7 @@ void bttv_input_irq(struct bttv *btv)
 static void bttv_input_timer(unsigned long data)
 {
        struct bttv *btv = (struct bttv*)data;
-       struct bttv_ir *ir = btv->remote;
+       struct card_ir *ir = btv->remote;
        unsigned long timeout;
 
        ir_handle_key(btv);
@@ -91,51 +96,9 @@ static void bttv_input_timer(unsigned long data)
 
 /* ---------------------------------------------------------------*/
 
-static int rc5_remote_gap = 885;
-module_param(rc5_remote_gap, int, 0644);
-static int rc5_key_timeout = 200;
-module_param(rc5_key_timeout, int, 0644);
-
-#define RC5_START(x)   (((x)>>12)&3)
-#define RC5_TOGGLE(x)  (((x)>>11)&1)
-#define RC5_ADDR(x)    (((x)>>6)&31)
-#define RC5_INSTR(x)   ((x)&63)
-
-/* decode raw bit pattern to RC5 code */
-static u32 rc5_decode(unsigned int code)
-{
-       unsigned int org_code = code;
-       unsigned int pair;
-       unsigned int rc5 = 0;
-       int i;
-
-       code = (code << 1) | 1;
-       for (i = 0; i < 14; ++i) {
-               pair = code & 0x3;
-               code >>= 2;
-
-               rc5 <<= 1;
-               switch (pair) {
-               case 0:
-               case 2:
-                       break;
-               case 1:
-                       rc5 |= 1;
-                       break;
-               case 3:
-                       dprintk(KERN_WARNING "bad code: %x\n", org_code);
-                       return 0;
-               }
-       }
-       dprintk(KERN_WARNING "code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
-               "instr=%x\n", rc5, org_code, RC5_START(rc5),
-               RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
-       return rc5;
-}
-
 static int bttv_rc5_irq(struct bttv *btv)
 {
-       struct bttv_ir *ir = btv->remote;
+       struct card_ir *ir = btv->remote;
        struct timeval tv;
        u32 gpio;
        u32 gap;
@@ -165,8 +128,8 @@ static int bttv_rc5_irq(struct bttv *btv)
                /* only if in the code (otherwise spurious IRQ or timer
                   late) */
                if (ir->last_bit < 28) {
-                       ir->last_bit = (gap - rc5_remote_gap / 2) /
-                           rc5_remote_gap;
+                       ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+                           ir_rc5_remote_gap;
                        ir->code |= 1 << ir->last_bit;
                }
                /* starting new code */
@@ -186,80 +149,9 @@ static int bttv_rc5_irq(struct bttv *btv)
        return 1;
 }
 
-
-static void bttv_rc5_timer_end(unsigned long data)
-{
-       struct bttv_ir *ir = (struct bttv_ir *)data;
-       struct timeval tv;
-       unsigned long current_jiffies, timeout;
-       u32 gap;
-
-       /* get time */
-       current_jiffies = jiffies;
-       do_gettimeofday(&tv);
-
-       /* avoid overflow with gap >1s */
-       if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-               gap = 200000;
-       } else {
-               gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-                   tv.tv_usec - ir->base_time.tv_usec;
-       }
-
-       /* Allow some timmer jitter (RC5 is ~24ms anyway so this is ok) */
-       if (gap < 28000) {
-               dprintk(KERN_WARNING "spurious timer_end\n");
-               return;
-       }
-
-       ir->active = 0;
-       if (ir->last_bit < 20) {
-               /* ignore spurious codes (caused by light/other remotes) */
-               dprintk(KERN_WARNING "short code: %x\n", ir->code);
-       } else {
-               u32 rc5 = rc5_decode(ir->code);
-
-               /* two start bits? */
-               if (RC5_START(rc5) != 3) {
-                       dprintk(KERN_WARNING "rc5 start bits invalid: %u\n", RC5_START(rc5));
-
-                       /* right address? */
-               } else if (RC5_ADDR(rc5) == 0x0) {
-                       u32 toggle = RC5_TOGGLE(rc5);
-                       u32 instr = RC5_INSTR(rc5);
-
-                       /* Good code, decide if repeat/repress */
-                       if (toggle != RC5_TOGGLE(ir->last_rc5) ||
-                           instr != RC5_INSTR(ir->last_rc5)) {
-                               dprintk(KERN_WARNING "instruction %x, toggle %x\n", instr,
-                                       toggle);
-                               ir_input_nokey(ir->dev, &ir->ir);
-                               ir_input_keydown(ir->dev, &ir->ir, instr,
-                                                instr);
-                       }
-
-                       /* Set/reset key-up timer */
-                       timeout = current_jiffies + (500 + rc5_key_timeout
-                                                    * HZ) / 1000;
-                       mod_timer(&ir->timer_keyup, timeout);
-
-                       /* Save code for repeat test */
-                       ir->last_rc5 = rc5;
-               }
-       }
-}
-
-static void bttv_rc5_timer_keyup(unsigned long data)
-{
-       struct bttv_ir *ir = (struct bttv_ir *)data;
-
-       dprintk(KERN_DEBUG "key released\n");
-       ir_input_nokey(ir->dev, &ir->ir);
-}
-
 /* ---------------------------------------------------------------------- */
 
-static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
+static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 {
        if (ir->polling) {
                init_timer(&ir->timer);
@@ -270,12 +162,17 @@ static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
        } else if (ir->rc5_gpio) {
                /* set timer_end for code completion */
                init_timer(&ir->timer_end);
-               ir->timer_end.function = bttv_rc5_timer_end;
+               ir->timer_end.function = ir_rc5_timer_end;
                ir->timer_end.data = (unsigned long)ir;
 
                init_timer(&ir->timer_keyup);
-               ir->timer_keyup.function = bttv_rc5_timer_keyup;
+               ir->timer_keyup.function = ir_rc5_timer_keyup;
                ir->timer_keyup.data = (unsigned long)ir;
+               ir->shift_by = 1;
+               ir->start = 3;
+               ir->addr = 0x0;
+               ir->rc5_key_timeout = ir_rc5_key_timeout;
+               ir->rc5_remote_gap = ir_rc5_remote_gap;
        }
 }
 
@@ -299,7 +196,7 @@ static void bttv_ir_stop(struct bttv *btv)
 
 int bttv_input_init(struct bttv *btv)
 {
-       struct bttv_ir *ir;
+       struct card_ir *ir;
        IR_KEYTAB_TYPE *ir_codes = NULL;
        struct input_dev *input_dev;
        int ir_type = IR_TYPE_OTHER;
index f9c9e3c4d111944cf2c42d93c45513b5a28304da..5491acbdaf6387426e6292c3974d664a5bed10e3 100644 (file)
@@ -197,33 +197,6 @@ struct bttv_core {
 struct bttv;
 
 
-struct bttv_ir {
-       struct input_dev        *dev;
-       struct ir_input_state   ir;
-       char                    name[32];
-       char                    phys[32];
-
-       /* Usual gpio signalling */
-
-       u32                     mask_keycode;
-       u32                     mask_keydown;
-       u32                     mask_keyup;
-       u32                     polling;
-       u32                     last_gpio;
-       struct work_struct      work;
-       struct timer_list       timer;
-
-       /* RC5 gpio */
-       u32 rc5_gpio;
-       struct timer_list timer_end;    /* timer_end for code completion */
-       struct timer_list timer_keyup;  /* timer_end for key release */
-       u32 last_rc5;                   /* last good rc5 code */
-       u32 last_bit;                   /* last raw bit seen */
-       u32 code;                       /* raw code under construction */
-       struct timeval base_time;       /* time of last seen code */
-       int active;                     /* building raw code */
-};
-
 struct tvcard
 {
        char *name;
index 311c4c541e01d554f3b396248bdf18419ce99afa..3802cafc9e4168a93d4f6525cfdb9213c3282706 100644 (file)
@@ -308,7 +308,7 @@ struct bttv {
 
        /* infrared remote */
        int has_remote;
-       struct bttv_ir *remote;
+       struct card_ir *remote;
 
        /* locking */
        spinlock_t s_lock;
index ae984bbe36b6104bd209085d89dad26c62f1c02e..dc45b2374f58ae20b33b2aa5468b126557c22b21 100644 (file)
@@ -3926,6 +3926,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
        case SAA7134_BOARD_KWORLD_TERMINATOR:
        case SAA7134_BOARD_SEDNA_PC_TV_CARDBUS:
        case SAA7134_BOARD_FLYDVBT_LR301:
+       case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
        case SAA7134_BOARD_FLYDVBTDUO:
        case SAA7134_BOARD_PROTEUS_2309:
        case SAA7134_BOARD_AVERMEDIA_A16AR:
index e4252683a597018741ca63b57b5c1730b46891f2..08848ebc682f7cf83ff5bdaa7a9b4ce228683a19 100644 (file)
@@ -40,16 +40,24 @@ static int pinnacle_remote = 0;
 module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
 MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
 
+int ir_rc5_remote_gap = 885;
+module_param(ir_rc5_remote_gap, int, 0644);
+int ir_rc5_key_timeout = 115;
+module_param(ir_rc5_key_timeout, int, 0644);
+
 #define dprintk(fmt, arg...)   if (ir_debug) \
        printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
        printk(KERN_DEBUG "%s/ir: " fmt, ir->c.name , ## arg)
 
+/** rc5 functions */
+static int saa7134_rc5_irq(struct saa7134_dev *dev);
+
 /* -------------------- GPIO generic keycode builder -------------------- */
 
 static int build_key(struct saa7134_dev *dev)
 {
-       struct saa7134_ir *ir = dev->remote;
+       struct card_ir *ir = dev->remote;
        u32 gpio, data;
 
        /* rising SAA7134_GPIO_GPRESCAN reads the status */
@@ -134,16 +142,19 @@ static int get_key_hvr1110(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
-       struct saa7134_ir *ir = dev->remote;
+       struct card_ir *ir = dev->remote;
 
-       if (!ir->polling)
+       if (!ir->polling && !ir->rc5_gpio) {
                build_key(dev);
+       } else if (ir->rc5_gpio) {
+               saa7134_rc5_irq(dev);
+       }
 }
 
 static void saa7134_input_timer(unsigned long data)
 {
        struct saa7134_dev *dev = (struct saa7134_dev*)data;
-       struct saa7134_ir *ir = dev->remote;
+       struct card_ir *ir = dev->remote;
        unsigned long timeout;
 
        build_key(dev);
@@ -151,7 +162,7 @@ static void saa7134_input_timer(unsigned long data)
        mod_timer(&ir->timer, timeout);
 }
 
-static void saa7134_ir_start(struct saa7134_dev *dev, struct saa7134_ir *ir)
+static void saa7134_ir_start(struct saa7134_dev *dev, struct card_ir *ir)
 {
        if (ir->polling) {
                init_timer(&ir->timer);
@@ -159,6 +170,19 @@ static void saa7134_ir_start(struct saa7134_dev *dev, struct saa7134_ir *ir)
                ir->timer.data     = (unsigned long)dev;
                ir->timer.expires  = jiffies + HZ;
                add_timer(&ir->timer);
+       } else if (ir->rc5_gpio) {
+               /* set timer_end for code completion */
+               init_timer(&ir->timer_end);
+               ir->timer_end.function = ir_rc5_timer_end;
+               ir->timer_end.data = (unsigned long)ir;
+               init_timer(&ir->timer_keyup);
+               ir->timer_keyup.function = ir_rc5_timer_keyup;
+               ir->timer_keyup.data = (unsigned long)ir;
+               ir->shift_by = 2;
+               ir->start = 0x2;
+               ir->addr = 0x17;
+               ir->rc5_key_timeout = ir_rc5_key_timeout;
+               ir->rc5_remote_gap = ir_rc5_remote_gap;
        }
 }
 
@@ -170,13 +194,14 @@ static void saa7134_ir_stop(struct saa7134_dev *dev)
 
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
-       struct saa7134_ir *ir;
+       struct card_ir *ir;
        struct input_dev *input_dev;
        IR_KEYTAB_TYPE *ir_codes = NULL;
        u32 mask_keycode = 0;
        u32 mask_keydown = 0;
        u32 mask_keyup   = 0;
        int polling      = 0;
+       int rc5_gpio     = 0;
        int ir_type      = IR_TYPE_OTHER;
        int err;
 
@@ -295,6 +320,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
                mask_keycode = 0x0001F00;
                mask_keydown = 0x0040000;
                break;
+       case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
+               ir_codes     = ir_codes_asus_pc39;
+               mask_keydown = 0x0040000;
+               rc5_gpio = 1;
+               break;
        }
        if (NULL == ir_codes) {
                printk("%s: Oops: IR config error [card=%d]\n",
@@ -316,6 +346,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
        ir->mask_keydown = mask_keydown;
        ir->mask_keyup   = mask_keyup;
        ir->polling      = polling;
+       ir->rc5_gpio     = rc5_gpio;
 
        /* init input device */
        snprintf(ir->name, sizeof(ir->name), "saa7134 IR (%s)",
@@ -402,6 +433,49 @@ void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir)
        }
 
 }
+
+static int saa7134_rc5_irq(struct saa7134_dev *dev)
+{
+       struct card_ir *ir = dev->remote;
+       struct timeval tv;
+       u32 gap;
+       unsigned long current_jiffies, timeout;
+
+       /* get time of bit */
+       current_jiffies = jiffies;
+       do_gettimeofday(&tv);
+
+       /* avoid overflow with gap >1s */
+       if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+               gap = 200000;
+       } else {
+               gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+                   tv.tv_usec - ir->base_time.tv_usec;
+       }
+
+       /* active code => add bit */
+       if (ir->active) {
+               /* only if in the code (otherwise spurious IRQ or timer
+                  late) */
+               if (ir->last_bit < 28) {
+                       ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
+                           ir_rc5_remote_gap;
+                       ir->code |= 1 << ir->last_bit;
+               }
+               /* starting new code */
+       } else {
+               ir->active = 1;
+               ir->code = 0;
+               ir->base_time = tv;
+               ir->last_bit = 0;
+
+               timeout = current_jiffies + (500 + 30 * HZ) / 1000;
+               mod_timer(&ir->timer_end, timeout);
+       }
+
+       return 1;
+}
+
 /* ----------------------------------------------------------------------
  * Local variables:
  * c-basic-offset: 8
index 88cd1297df133f4ec0df4e9bea5928004e12ed72..73b16b2044f608b10135850a5d6823716eaa7513 100644 (file)
@@ -411,20 +411,6 @@ struct saa7134_dmasound {
        struct snd_pcm_substream   *substream;
 };
 
-/* IR input */
-struct saa7134_ir {
-       struct input_dev           *dev;
-       struct ir_input_state      ir;
-       char                       name[32];
-       char                       phys[32];
-       u32                        mask_keycode;
-       u32                        mask_keydown;
-       u32                        mask_keyup;
-       int                        polling;
-       u32                        last_gpio;
-       struct timer_list          timer;
-};
-
 /* ts/mpeg status */
 struct saa7134_ts {
        /* TS capture */
@@ -463,7 +449,7 @@ struct saa7134_dev {
 
        /* infrared remote */
        int                        has_remote;
-       struct saa7134_ir          *remote;
+       struct card_ir             *remote;
 
        /* pci i/o */
        char                       name[32];
@@ -698,6 +684,7 @@ void saa7134_input_fini(struct saa7134_dev *dev);
 void saa7134_input_irq(struct saa7134_dev *dev);
 void saa7134_set_i2c_ir(struct saa7134_dev *dev, struct IR_i2c *ir);
 
+
 /*
  * Local variables:
  * c-basic-offset: 8
index 4bb0ad81017903dc9e01f76d9ab49de6625317ee..c60a309979730be0043e0ab59dc7f08987f88db4 100644 (file)
 #define IR_KEYCODE(tab,code)   (((unsigned)code < IR_KEYTAB_SIZE) \
                                 ? tab[code] : KEY_RESERVED)
 
+extern int ir_rc5_remote_gap;
+extern int ir_rc5_key_timeout;
+
+#define RC5_START(x)   (((x)>>12)&3)
+#define RC5_TOGGLE(x)  (((x)>>11)&1)
+#define RC5_ADDR(x)    (((x)>>6)&31)
+#define RC5_INSTR(x)   ((x)&63)
+
 struct ir_input_state {
        /* configuration */
        int                ir_type;
@@ -48,6 +56,40 @@ struct ir_input_state {
        int                keypressed;  /* current state */
 };
 
+/* this was saa7134_ir and bttv_ir, moved here for
+ * rc5 decoding. */
+struct card_ir {
+       struct input_dev        *dev;
+       struct ir_input_state   ir;
+       char                    name[32];
+       char                    phys[32];
+
+       /* Usual gpio signalling */
+
+       u32                     mask_keycode;
+       u32                     mask_keydown;
+       u32                     mask_keyup;
+       u32                     polling;
+       u32                     last_gpio;
+       int                     shift_by;
+       int                     start; // What should RC5_START() be
+       int                     addr; // What RC5_ADDR() should be.
+       int                     rc5_key_timeout;
+       int                     rc5_remote_gap;
+       struct work_struct      work;
+       struct timer_list       timer;
+
+       /* RC5 gpio */
+       u32 rc5_gpio;
+       struct timer_list timer_end;    /* timer_end for code completion */
+       struct timer_list timer_keyup;  /* timer_end for key release */
+       u32 last_rc5;                   /* last good rc5 code */
+       u32 last_bit;                   /* last raw bit seen */
+       u32 code;                       /* raw code under construction */
+       struct timeval base_time;       /* time of last seen code */
+       int active;                     /* building raw code */
+};
+
 void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
                   int ir_type, IR_KEYTAB_TYPE *ir_codes);
 void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
@@ -58,6 +100,10 @@ int  ir_dump_samples(u32 *samples, int count);
 int  ir_decode_biphase(u32 *samples, int count, int low, int high);
 int  ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
 
+u32 ir_rc5_decode(unsigned int code);
+void ir_rc5_timer_end(unsigned long data);
+void ir_rc5_timer_keyup(unsigned long data);
+
 /* Keymaps to be used by other modules */
 
 extern IR_KEYTAB_TYPE ir_codes_empty[IR_KEYTAB_SIZE];
@@ -94,6 +140,7 @@ extern IR_KEYTAB_TYPE ir_codes_npgtech[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_norwood[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE];
 extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE];
+extern IR_KEYTAB_TYPE ir_codes_asus_pc39[IR_KEYTAB_SIZE];
 
 #endif