ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers

Use pin macros instead of magic numbers to ease interpretation.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 2e2c3d1a1fa28a36111ae9725b68c4120a1b0609..6eec8dc5143e076a294228cdba523862891c817e 100644 (file)
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -68,7 +68,7 @@
 
        ahb {
                usb0: gadget@00300000 {
-                       atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+                       atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_usba_vbus>;
                        status = "okay";
@@ -76,8 +76,8 @@
 
                usb1: ohci@00400000 {
                        num-ports = <3>;
-                       atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
-                                          &pioA 42 GPIO_ACTIVE_HIGH
+                       atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+                                          &pioA PIN_PB10 GPIO_ACTIVE_HIGH
                                           0
                                          >;
                        pinctrl-names = "default";
@@ -127,7 +127,7 @@
                                ethernet-phy@1 {
                                        reg = <0x1>;
                                        interrupt-parent = <&pioA>;
-                                       interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+                                       interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
                                };
                        };
 
@@ -160,9 +160,9 @@
                                        compatible = "active-semi,act8945a";
                                        reg = <0x5b>;
                                        active-semi,vsel-high;
-                                       active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-                                       active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-                                       active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+                                       active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+                                       active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+                                       active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
                                        active-semi,input-voltage-threshold-microvolt = <6600>;
                                        active-semi,precondition-timeout = <40>;
                                        active-semi,total-timeout = <3>;
@@ -504,7 +504,7 @@
 
                bp1 {
                        label = "PB_USER";
-                       gpios = <&pioA 41 GPIO_ACTIVE_LOW>;
+                       gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
                        linux,code = <0x104>;
                };
        };
@@ -517,17 +517,18 @@
 
                red {
                        label = "red";
-                       gpios = <&pioA 38 GPIO_ACTIVE_LOW>;
+                       gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
                };
 
+
                green {
                        label = "green";
-                       gpios = <&pioA 37 GPIO_ACTIVE_LOW>;
+                       gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
                };
 
                blue {
                        label = "blue";
-                       gpios = <&pioA 32 GPIO_ACTIVE_LOW>;
+                       gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "heartbeat";
                };
        };