phy: renesas: rcar-gen3-usb2: Check a property to use otg pins
authorYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fri, 21 Sep 2018 11:53:20 +0000 (20:53 +0900)
committerKishon Vijay Abraham I <kishon@ti.com>
Tue, 25 Sep 2018 10:40:10 +0000 (16:10 +0530)
Since All R-Car Gen3 SoCs have dedicated otg pins actually but
some boards don't use the otg pins (e.g. R-Car D3 Draak and R-Car E3
Ebisu), the driver should not choose SoC model base by using
rcar_gen3_phy_usb2_match_table's data. So, this patch checks a
"renesas,no-otg-pins" property to set the "uses_otg_pins".

Note that since r8a77995-draak.dts and r8a77990-ebisu.dts don't have
'dr_mode = "otg";' for now, if we apply this patch, no behavior
changes (the value of "uses_otg_pins" is false).

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
drivers/phy/renesas/phy-rcar-gen3-usb2.c

index d69317ea95c9ecb627e114dadf01edfa2f48d76b..856056e14b26d6673df8cdf24828a8dd86c67adc 100644 (file)
@@ -78,8 +78,6 @@
 #define USB2_ADPCTRL_IDPULLUP          BIT(5)  /* 1 = ID sampling is enabled */
 #define USB2_ADPCTRL_DRVVBUS           BIT(4)
 
-#define RCAR_GEN3_PHY_HAS_DEDICATED_PINS       1
-
 struct rcar_gen3_chan {
        void __iomem *base;
        struct extcon_dev *extcon;
@@ -385,21 +383,10 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 }
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
-       {
-               .compatible = "renesas,usb2-phy-r8a7795",
-               .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
-       },
-       {
-               .compatible = "renesas,usb2-phy-r8a7796",
-               .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
-       },
-       {
-               .compatible = "renesas,usb2-phy-r8a77965",
-               .data = (void *)RCAR_GEN3_PHY_HAS_DEDICATED_PINS,
-       },
-       {
-               .compatible = "renesas,rcar-gen3-usb2-phy",
-       },
+       { .compatible = "renesas,usb2-phy-r8a7795" },
+       { .compatible = "renesas,usb2-phy-r8a7796" },
+       { .compatible = "renesas,usb2-phy-r8a77965" },
+       { .compatible = "renesas,rcar-gen3-usb2-phy" },
        { }
 };
 MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
@@ -445,7 +432,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
        if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
                int ret;
 
-               channel->uses_otg_pins = (uintptr_t)of_device_get_match_data(dev);
+               channel->uses_otg_pins = !of_property_read_bool(dev->of_node,
+                                                       "renesas,no-otg-pins");
                channel->extcon = devm_extcon_dev_allocate(dev,
                                                        rcar_gen3_phy_cable);
                if (IS_ERR(channel->extcon))