See Documentation/cputopology.txt for more information.
+What: /sys/devices/system/cpu/probe
+ /sys/devices/system/cpu/release
+Date: November 2009
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: Dynamic addition and removal of CPU's. This is not hotplug
+ removal, this is meant complete removal/addition of the CPU
+ from the system.
+
+ probe: writes to this file will dynamically add a CPU to the
+ system. Information written to the file to add CPU's is
+ architecture specific.
+
+ release: writes to this file dynamically remove a CPU from
+ the system. Information writtento the file to remove CPU's
+ is architecture specific.
What: /sys/devices/system/cpu/cpu#/node
Date: October 2009
additional_cpus=n (*) Use this to limit hotpluggable cpus. This option sets
cpu_possible_map = cpu_present_map + additional_cpus
+cede_offline={"off","on"} Use this option to disable/enable putting offlined
+ processors to an extended H_CEDE state on
+ supported pseries platforms.
+ If nothing is specified,
+ cede_offline is set to "on".
+
(*) Option valid only for following architectures
- ia64
Authors in alphabetical order:
Joel Becker <joel.becker@oracle.com>
Zach Brown <zach.brown@oracle.com>
-Mark Fasheh <mark.fasheh@oracle.com>
+Mark Fasheh <mfasheh@suse.com>
Kurt Hackel <kurt.hackel@oracle.com>
+Tao Ma <tao.ma@oracle.com>
Sunil Mushran <sunil.mushran@oracle.com>
Manish Singh <manish.singh@oracle.com>
+Tiger Yang <tiger.yang@oracle.com>
Caveats
=======
Features which OCFS2 does not support yet:
- - quotas
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
performance.
localalloc=8(*) Allows custom localalloc size in MB. If the value is too
large, the fs will silently revert it to the default.
- Localalloc is not enabled for local mounts.
localflocks This disables cluster aware flock.
inode64 Indicates that Ocfs2 is allowed to create inodes at
any location in the filesystem, including those which
Datasheet: Only available via NDA from ServerWorks
* ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
Datasheet: Not publicly available
- * AMD SB900
+ * AMD Hudson-2
Datasheet: Not publicly available
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
- compatible : should be "fsl,fpga-pixis".
- reg : should contain the address and the length of the FPPGA register
set.
+- interrupt-parent: should specify phandle for the interrupt controller.
+- interrupts : should specify event (wakeup) IRQ.
Example (MPC8610HPCD):
board-control@e8000000 {
compatible = "fsl,fpga-pixis";
reg = <0xe8000000 32>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8>;
};
* Freescale BCSR GPIO banks
Generic Thermal Sysfs driver How To
-=========================
+===================================
Written by Sujith Thomas <sujith.thomas@intel.com>, Zhang Rui <rui.zhang@intel.com>
0. Introduction
-The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors)
-and thermal cooling devices (fan, processor...) to register with the thermal management
-solution and to be a part of it.
+The generic thermal sysfs provides a set of interfaces for thermal zone
+devices (sensors) and thermal cooling devices (fan, processor...) to register
+with the thermal management solution and to be a part of it.
-This how-to focuses on enabling new thermal zone and cooling devices to participate
-in thermal management.
-This solution is platform independent and any type of thermal zone devices and
-cooling devices should be able to make use of the infrastructure.
+This how-to focuses on enabling new thermal zone and cooling devices to
+participate in thermal management.
+This solution is platform independent and any type of thermal zone devices
+and cooling devices should be able to make use of the infrastructure.
-The main task of the thermal sysfs driver is to expose thermal zone attributes as well
-as cooling device attributes to the user space.
-An intelligent thermal management application can make decisions based on inputs
-from thermal zone attributes (the current temperature and trip point temperature)
-and throttle appropriate devices.
+The main task of the thermal sysfs driver is to expose thermal zone attributes
+as well as cooling device attributes to the user space.
+An intelligent thermal management application can make decisions based on
+inputs from thermal zone attributes (the current temperature and trip point
+temperature) and throttle appropriate devices.
[0-*] denotes any positive number starting from 0
[1-*] denotes any positive number starting from 1
1. thermal sysfs driver interface functions
1.1 thermal zone device interface
-1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips,
- void *devdata, struct thermal_zone_device_ops *ops)
-
- This interface function adds a new thermal zone device (sensor) to
- /sys/class/thermal folder as thermal_zone[0-*].
- It tries to bind all the thermal cooling devices registered at the same time.
-
- name: the thermal zone name.
- trips: the total number of trip points this thermal zone supports.
- devdata: device private data
- ops: thermal zone device call-backs.
- .bind: bind the thermal zone device with a thermal cooling device.
- .unbind: unbind the thermal zone device with a thermal cooling device.
- .get_temp: get the current temperature of the thermal zone.
- .get_mode: get the current mode (user/kernel) of the thermal zone.
- "kernel" means thermal management is done in kernel.
- "user" will prevent kernel thermal driver actions upon trip points
- so that user applications can take charge of thermal management.
- .set_mode: set the mode (user/kernel) of the thermal zone.
- .get_trip_type: get the type of certain trip point.
- .get_trip_temp: get the temperature above which the certain trip point
- will be fired.
+1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
+ int trips, void *devdata, struct thermal_zone_device_ops *ops)
+
+ This interface function adds a new thermal zone device (sensor) to
+ /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
+ thermal cooling devices registered at the same time.
+
+ name: the thermal zone name.
+ trips: the total number of trip points this thermal zone supports.
+ devdata: device private data
+ ops: thermal zone device call-backs.
+ .bind: bind the thermal zone device with a thermal cooling device.
+ .unbind: unbind the thermal zone device with a thermal cooling device.
+ .get_temp: get the current temperature of the thermal zone.
+ .get_mode: get the current mode (user/kernel) of the thermal zone.
+ - "kernel" means thermal management is done in kernel.
+ - "user" will prevent kernel thermal driver actions upon trip points
+ so that user applications can take charge of thermal management.
+ .set_mode: set the mode (user/kernel) of the thermal zone.
+ .get_trip_type: get the type of certain trip point.
+ .get_trip_temp: get the temperature above which the certain trip point
+ will be fired.
1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
- This interface function removes the thermal zone device.
- It deletes the corresponding entry form /sys/class/thermal folder and unbind all
- the thermal cooling devices it uses.
+ This interface function removes the thermal zone device.
+ It deletes the corresponding entry form /sys/class/thermal folder and
+ unbind all the thermal cooling devices it uses.
1.2 thermal cooling device interface
1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name,
- void *devdata, struct thermal_cooling_device_ops *)
-
- This interface function adds a new thermal cooling device (fan/processor/...) to
- /sys/class/thermal/ folder as cooling_device[0-*].
- It tries to bind itself to all the thermal zone devices register at the same time.
- name: the cooling device name.
- devdata: device private data.
- ops: thermal cooling devices call-backs.
- .get_max_state: get the Maximum throttle state of the cooling device.
- .get_cur_state: get the Current throttle state of the cooling device.
- .set_cur_state: set the Current throttle state of the cooling device.
+ void *devdata, struct thermal_cooling_device_ops *)
+
+ This interface function adds a new thermal cooling device (fan/processor/...)
+ to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ to all the thermal zone devices register at the same time.
+ name: the cooling device name.
+ devdata: device private data.
+ ops: thermal cooling devices call-backs.
+ .get_max_state: get the Maximum throttle state of the cooling device.
+ .get_cur_state: get the Current throttle state of the cooling device.
+ .set_cur_state: set the Current throttle state of the cooling device.
1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
- This interface function remove the thermal cooling device.
- It deletes the corresponding entry form /sys/class/thermal folder and unbind
- itself from all the thermal zone devices using it.
+ This interface function remove the thermal cooling device.
+ It deletes the corresponding entry form /sys/class/thermal folder and
+ unbind itself from all the thermal zone devices using it.
1.3 interface for binding a thermal zone device with a thermal cooling device
1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
- int trip, struct thermal_cooling_device *cdev);
+ int trip, struct thermal_cooling_device *cdev);
- This interface function bind a thermal cooling device to the certain trip point
- of a thermal zone device.
- This function is usually called in the thermal zone device .bind callback.
- tz: the thermal zone device
- cdev: thermal cooling device
- trip: indicates which trip point the cooling devices is associated with
- in this thermal zone.
+ This interface function bind a thermal cooling device to the certain trip
+ point of a thermal zone device.
+ This function is usually called in the thermal zone device .bind callback.
+ tz: the thermal zone device
+ cdev: thermal cooling device
+ trip: indicates which trip point the cooling devices is associated with
+ in this thermal zone.
1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
- int trip, struct thermal_cooling_device *cdev);
+ int trip, struct thermal_cooling_device *cdev);
- This interface function unbind a thermal cooling device from the certain trip point
- of a thermal zone device.
- This function is usually called in the thermal zone device .unbind callback.
- tz: the thermal zone device
- cdev: thermal cooling device
- trip: indicates which trip point the cooling devices is associated with
- in this thermal zone.
+ This interface function unbind a thermal cooling device from the certain
+ trip point of a thermal zone device. This function is usually called in
+ the thermal zone device .unbind callback.
+ tz: the thermal zone device
+ cdev: thermal cooling device
+ trip: indicates which trip point the cooling devices is associated with
+ in this thermal zone.
2. sysfs attributes structure
Thermal zone device sys I/F, created once it's registered:
/sys/class/thermal/thermal_zone[0-*]:
- |-----type: Type of the thermal zone
- |-----temp: Current temperature
- |-----mode: Working mode of the thermal zone
- |-----trip_point_[0-*]_temp: Trip point temperature
- |-----trip_point_[0-*]_type: Trip point type
+ |---type: Type of the thermal zone
+ |---temp: Current temperature
+ |---mode: Working mode of the thermal zone
+ |---trip_point_[0-*]_temp: Trip point temperature
+ |---trip_point_[0-*]_type: Trip point type
Thermal cooling device sys I/F, created once it's registered:
/sys/class/thermal/cooling_device[0-*]:
- |-----type : Type of the cooling device(processor/fan/...)
- |-----max_state: Maximum cooling state of the cooling device
- |-----cur_state: Current cooling state of the cooling device
+ |---type: Type of the cooling device(processor/fan/...)
+ |---max_state: Maximum cooling state of the cooling device
+ |---cur_state: Current cooling state of the cooling device
-These two dynamic attributes are created/removed in pairs.
-They represent the relationship between a thermal zone and its associated cooling device.
-They are created/removed for each
-thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution.
+Then next two dynamic attributes are created/removed in pairs. They represent
+the relationship between a thermal zone and its associated cooling device.
+They are created/removed for each successful execution of
+thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device.
-/sys/class/thermal/thermal_zone[0-*]
- |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone
- |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
+/sys/class/thermal/thermal_zone[0-*]:
+ |---cdev[0-*]: [0-*]th cooling device in current thermal zone
+ |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with
Besides the thermal zone device sysfs I/F and cooling device sysfs I/F,
-the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of
-thermal zone device. E.g. the generic thermal driver registers one hwmon class device
-and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones.
+the generic thermal driver also creates a hwmon sysfs I/F for each _type_
+of thermal zone device. E.g. the generic thermal driver registers one hwmon
+class device and build the associated hwmon sysfs I/F for all the registered
+ACPI thermal zones.
+
/sys/class/hwmon/hwmon[0-*]:
- |-----name: The type of the thermal zone devices.
- |-----temp[1-*]_input: The current temperature of thermal zone [1-*].
- |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*].
+ |---name: The type of the thermal zone devices
+ |---temp[1-*]_input: The current temperature of thermal zone [1-*]
+ |---temp[1-*]_critical: The critical trip point of thermal zone [1-*]
+
Please read Documentation/hwmon/sysfs-interface for additional information.
***************************
* Thermal zone attributes *
***************************
-type Strings which represent the thermal zone type.
- This is given by thermal zone driver as part of registration.
- Eg: "acpitz" indicates it's an ACPI thermal device.
- In order to keep it consistent with hwmon sys attribute,
- this should be a short, lowercase string,
- not containing spaces nor dashes.
- RO
- Required
-
-temp Current temperature as reported by thermal zone (sensor)
- Unit: millidegree Celsius
- RO
- Required
-
-mode One of the predefined values in [kernel, user]
- This file gives information about the algorithm
- that is currently managing the thermal zone.
- It can be either default kernel based algorithm
- or user space application.
- RW
- Optional
- kernel = Thermal management in kernel thermal zone driver.
- user = Preventing kernel thermal zone driver actions upon
- trip points so that user application can take full
- charge of the thermal management.
-
-trip_point_[0-*]_temp The temperature above which trip point will be fired
- Unit: millidegree Celsius
- RO
- Optional
-
-trip_point_[0-*]_type Strings which indicate the type of the trip point
- E.g. it can be one of critical, hot, passive,
- active[0-*] for ACPI thermal zone.
- RO
- Optional
-
-cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F
- for cooling device throttling control represents.
- RO
- Optional
-
-cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone
- -1 means the cooling device is not associated with any trip point.
- RO
- Optional
-
-******************************
-* Cooling device attributes *
-******************************
-
-type String which represents the type of device
- eg: For generic ACPI: this should be "Fan",
- "Processor" or "LCD"
- eg. For memory controller device on intel_menlow platform:
- this should be "Memory controller"
- RO
- Required
-
-max_state The maximum permissible cooling state of this cooling device.
- RO
- Required
-
-cur_state The current cooling state of this cooling device.
- the value can any integer numbers between 0 and max_state,
- cur_state == 0 means no cooling
- cur_state == max_state means the maximum cooling.
- RW
- Required
+type
+ Strings which represent the thermal zone type.
+ This is given by thermal zone driver as part of registration.
+ E.g: "acpitz" indicates it's an ACPI thermal device.
+ In order to keep it consistent with hwmon sys attribute; this should
+ be a short, lowercase string, not containing spaces nor dashes.
+ RO, Required
+
+temp
+ Current temperature as reported by thermal zone (sensor).
+ Unit: millidegree Celsius
+ RO, Required
+
+mode
+ One of the predefined values in [kernel, user].
+ This file gives information about the algorithm that is currently
+ managing the thermal zone. It can be either default kernel based
+ algorithm or user space application.
+ kernel = Thermal management in kernel thermal zone driver.
+ user = Preventing kernel thermal zone driver actions upon
+ trip points so that user application can take full
+ charge of the thermal management.
+ RW, Optional
+
+trip_point_[0-*]_temp
+ The temperature above which trip point will be fired.
+ Unit: millidegree Celsius
+ RO, Optional
+
+trip_point_[0-*]_type
+ Strings which indicate the type of the trip point.
+ E.g. it can be one of critical, hot, passive, active[0-*] for ACPI
+ thermal zone.
+ RO, Optional
+
+cdev[0-*]
+ Sysfs link to the thermal cooling device node where the sys I/F
+ for cooling device throttling control represents.
+ RO, Optional
+
+cdev[0-*]_trip_point
+ The trip point with which cdev[0-*] is associated in this thermal
+ zone; -1 means the cooling device is not associated with any trip
+ point.
+ RO, Optional
+
+passive
+ Attribute is only present for zones in which the passive cooling
+ policy is not supported by native thermal driver. Default is zero
+ and can be set to a temperature (in millidegrees) to enable a
+ passive trip point for the zone. Activation is done by polling with
+ an interval of 1 second.
+ Unit: millidegrees Celsius
+ RW, Optional
+
+*****************************
+* Cooling device attributes *
+*****************************
+
+type
+ String which represents the type of device, e.g:
+ - for generic ACPI: should be "Fan", "Processor" or "LCD"
+ - for memory controller device on intel_menlow platform:
+ should be "Memory controller".
+ RO, Required
+
+max_state
+ The maximum permissible cooling state of this cooling device.
+ RO, Required
+
+cur_state
+ The current cooling state of this cooling device.
+ The value can any integer numbers between 0 and max_state:
+ - cur_state == 0 means no cooling
+ - cur_state == max_state means the maximum cooling.
+ RW, Required
3. A simple implementation
-ACPI thermal zone may support multiple trip points like critical/hot/passive/active.
-If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time,
-it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all.
-It has one processor and one fan, which are both registered as thermal_cooling_device.
-If the processor is listed in _PSL method, and the fan is listed in _AL0 method,
-the sys I/F structure will be built like this:
+ACPI thermal zone may support multiple trip points like critical, hot,
+passive, active. If an ACPI thermal zone supports critical, passive,
+active[0] and active[1] at the same time, it may register itself as a
+thermal_zone_device (thermal_zone1) with 4 trip points in all.
+It has one processor and one fan, which are both registered as
+thermal_cooling_device.
+
+If the processor is listed in _PSL method, and the fan is listed in _AL0
+method, the sys I/F structure will be built like this:
/sys/class/thermal:
|thermal_zone1:
- |-----type: acpitz
- |-----temp: 37000
- |-----mode: kernel
- |-----trip_point_0_temp: 100000
- |-----trip_point_0_type: critical
- |-----trip_point_1_temp: 80000
- |-----trip_point_1_type: passive
- |-----trip_point_2_temp: 70000
- |-----trip_point_2_type: active0
- |-----trip_point_3_temp: 60000
- |-----trip_point_3_type: active1
- |-----cdev0: --->/sys/class/thermal/cooling_device0
- |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */
- |-----cdev1: --->/sys/class/thermal/cooling_device3
- |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
+ |---type: acpitz
+ |---temp: 37000
+ |---mode: kernel
+ |---trip_point_0_temp: 100000
+ |---trip_point_0_type: critical
+ |---trip_point_1_temp: 80000
+ |---trip_point_1_type: passive
+ |---trip_point_2_temp: 70000
+ |---trip_point_2_type: active0
+ |---trip_point_3_temp: 60000
+ |---trip_point_3_type: active1
+ |---cdev0: --->/sys/class/thermal/cooling_device0
+ |---cdev0_trip_point: 1 /* cdev0 can be used for passive */
+ |---cdev1: --->/sys/class/thermal/cooling_device3
+ |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/
|cooling_device0:
- |-----type: Processor
- |-----max_state: 8
- |-----cur_state: 0
+ |---type: Processor
+ |---max_state: 8
+ |---cur_state: 0
|cooling_device3:
- |-----type: Fan
- |-----max_state: 2
- |-----cur_state: 0
+ |---type: Fan
+ |---max_state: 2
+ |---cur_state: 0
/sys/class/hwmon:
|hwmon0:
- |-----name: acpitz
- |-----temp1_input: 37000
- |-----temp1_crit: 100000
+ |---name: acpitz
+ |---temp1_input: 37000
+ |---temp1_crit: 100000
exit(EXIT_FAILURE);
}
-int checked_open(const char *pathname, int flags)
+static int checked_open(const char *pathname, int flags)
{
int fd = open(pathname, flags);
M: Latchesar Ionkov <lucho@ionkov.net>
L: v9fs-developer@lists.sourceforge.net
W: http://swik.net/v9fs
-T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git
S: Maintained
F: Documentation/filesystems/9p.txt
F: fs/9p/
L: acpi4asus-user@lists.sourceforge.net
W: http://acpi4asus.sf.net
S: Maintained
-F: arch/x86/kernel/acpi/boot.c
F: drivers/platform/x86/asus_acpi.c
ASUS ASB100 HARDWARE MONITOR DRIVER
F: drivers/net/tg3.*
BROCADE BFA FC SCSI DRIVER
-P: Jing Huang
-M: huangj@brocade.com
-L: linux-scsi@vger.kernel.org
-S: Supported
-F: drivers/scsi/bfa/
+M: Jing Huang <huangj@brocade.com>
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/bfa/
BSG (block layer generic sg v4 driver)
M: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
IPMI SUBSYSTEM
M: Corey Minyard <minyard@acm.org>
-L: openipmi-developer@lists.sourceforge.net
+L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
W: http://openipmi.sourceforge.net/
S: Supported
F: Documentation/IPMI.txt
KMEMCHECK
M: Vegard Nossum <vegardno@ifi.uio.no>
-P Pekka Enberg
-M: penberg@cs.helsinki.fi
+M: Pekka Enberg <penberg@cs.helsinki.fi>
S: Maintained
+F: Documentation/kmemcheck.txt
+F: arch/x86/include/asm/kmemcheck.h
+F: arch/x86/mm/kmemcheck/
+F: include/linux/kmemcheck.h
+F: mm/kmemcheck.c
KMEMLEAK
M: Catalin Marinas <catalin.marinas@arm.com>
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
-T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
W: http://www.linuxfoundation.org/en/Net
W: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
S: Maintained
F: net/
F: include/net/
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
+M: Ivo van Doorn <IvDoorn@gmail.com>
+M: Gertjan van Wingerde <gwingerde@gmail.com>
L: linux-wireless@vger.kernel.org
L: users@rt2x00.serialmonkey.com (moderated for non-subscribers)
W: http://rt2x00.serialmonkey.com/
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
S: Maintained
-F Documentation/rfkill.txt
+F: Documentation/rfkill.txt
F: net/rfkill/
RISCOM8 DRIVER
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
L: linux-security-module@vger.kernel.org (suggested Cc:)
-T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
S: Supported
F: security/
F: include/linux/libata.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
-P: Jayamohan Kallickal
-M: jayamohank@serverengines.com
-L: linux-scsi@vger.kernel.org
-W: http://www.serverengines.com
-S: Supported
-F: drivers/scsi/be2iscsi/
+M: Jayamohan Kallickal <jayamohank@serverengines.com>
+L: linux-scsi@vger.kernel.org
+W: http://www.serverengines.com
+S: Supported
+F: drivers/scsi/be2iscsi/
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
M: Sathya Perla <sathyap@serverengines.com>
F: include/linux/vlynq.h
VMWARE VMXNET3 ETHERNET DRIVER
-M: Shreyas Bhatewara <sbhatewara@vmware.com>
-M:
VMware, Inc. <pv-drivers@vmware.com>
-L: netdev@vger.kernel.org
-S: Maintained
-F: drivers/net/vmxnet3/
+M: Shreyas Bhatewara <sbhatewara@vmware.com>
+M:
"VMware, Inc." <pv-drivers@vmware.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/vmxnet3/
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
M: Liam Girdwood <lrg@slimlogic.co.uk>
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 32
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
HOSTCC = gcc
HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
# Decide whether to build built-in, modular, or both.
const char * prog_name;
-void
+static void
usage (void)
{
fprintf(stderr,
#define F_GETOWN 6 /* for sockets. */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
-#define F_SETOWN_EX 12
-#define F_GETOWN_EX 13
/* for posix fcntl() and lockf() */
#define F_RDLCK 1
register struct thread_info *__current_thread_info __asm__("$8");
#define current_thread_info() __current_thread_info
+#endif /* __ASSEMBLY__ */
+
/* Thread information allocation. */
#define THREAD_SIZE_ORDER 1
#define THREAD_SIZE (2*PAGE_SIZE)
-#endif /* __ASSEMBLY__ */
-
#define PREEMPT_ACTIVE 0x40000000
/*
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
+CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS is not set
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
#
# Processor Features
#
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_CPU_DCACHE_WRITETHROUGH=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
-# CONFIG_AEABI is not set
+CONFIG_AEABI=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
#
# Networking
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+CONFIG_GPIO_SYSFS=y
#
# Dallas's 1-wire bus
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# Multimedia devices
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_AMS_DELTA=y
#
# HID Devices
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May 4 11:58:57 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov 7 20:31:18 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=19
# CONFIG_GROUP_SCHED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
CONFIG_ARCH_KIRKWOOD=y
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
#
# Marvell Kirkwood Implementations
CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_TS219=y
+CONFIG_MACH_OPENRD_BASE=y
CONFIG_PLAT_ORION=y
#
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
#
# Bus support
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
#
# Boot options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_DATAFLASH is not set
CONFIG_MTD_M25P80=y
CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_MVSDIO=y
# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
#
# Hardware I/O ports
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_USB=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_TWL4030=y
+
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_TWL4030=y
+
#
# File systems
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+
+# added by hand for now
+CONFIG_KEYBOARD_TWL4030=y
+CONFIG_USB_OTG_UTILS=y
+CONFIG_TWL4030_USB=y
+CONFIG_MMC_OMAP_HS=y
+
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc4
-# Mon May 4 14:07:25 2009
+# Linux kernel version: 2.6.32-rc6
+# Sat Nov 7 20:52:21 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
CONFIG_ARCH_ORION5X=y
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
#
# Orion Implementations
CONFIG_MACH_TS78XX=y
CONFIG_MACH_MV2120=y
CONFIG_MACH_EDMINI_V2=y
+CONFIG_MACH_D2NET=y
+CONFIG_MACH_BIGDISK=y
+CONFIG_MACH_NET2BIG=y
CONFIG_MACH_MSS2=y
CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_CPU_FEROCEON_OLD_ID=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_FEROCEON=y
CONFIG_CPU_TLB_FEROCEON=y
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
#
# Bus support
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
#
# Boot options
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=m
-# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
-CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_MV_CESA=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#define __ARM_NR_usr32 (__ARM_NR_BASE+4)
#define __ARM_NR_set_tls (__ARM_NR_BASE+5)
+/*
+ * *NOTE*: This is a ghost syscall private to the kernel. Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence. Don't ever use this from user code.
+ */
+#ifdef __KERNEL__
+#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0)
+#endif
+
/*
* The following syscalls are obsolete and no longer available for EABI.
*/
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
#include <asm/unwind.h>
+#include <asm/unistd.h>
#include "entry-header.S"
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
- mov r7, #0xff00 @ 0xfff0 into r7 for EABI
- orr r7, r7, #0xf0
- swi #0x9ffff0
+ ldr r7, =1f @ it's 20 bits
+ swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
+1: .word __ARM_NR_cmpxchg
#elif __LINUX_ARM_ARCH__ < 6
bl printhex8
adr r0, str_a2
bl printascii
- adr r3, 3f
+ adr r3, 4f
ldmia r3, {r4, r5, r6} @ get machine desc list
sub r4, r3, r4 @ get offset between virt&phys
add r5, r5, r4 @ convert virt addresses to
u32 scu_ctrl;
scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+ /* already enabled? */
+ if (scu_ctrl & 1)
+ return;
+
scu_ctrl |= 1;
__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
* __kuser_cmpxchg code in entry-armv.S should be aware of its
* existence. Don't ever use this from user code.
*/
- case 0xfff0:
+ case NR(cmpxchg):
for (;;) {
extern void do_DataAbort(unsigned long addr, unsigned int fsr,
struct pt_regs *regs);
if not implemented, rather than raising SIGILL. This
way the calling program can gracefully determine whether
a feature is supported. */
- if (no <= 0x7ff)
+ if ((no & 0xffff) <= 0x7ff)
return -ENOSYS;
break;
}
help
Select this if you are using the Adeneo Neocore 926 board.
-config MACH_AT91SAM9G20EK_2MMC
- bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
- depends on ARCH_AT91SAM9G20
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- Rev A or B modified for 2 MMC Slots.
-
endif
# ----------------------------------------------------------
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
depends on ARCH_AT91SAM9G20
help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+ Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+ that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+ bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+ depends on ARCH_AT91SAM9G20
+ help
+ Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+ with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+ onwards.
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
config MTD_NAND_ATMEL_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
* MACB Ethernet device
*/
static struct at91_eth_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PC12,
+ .phy_irq_pin = AT91_PIN_PB0,
.is_rmii = 1,
};
/*
* MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
*/
#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
static struct mci_platform_data __initdata ek_mmc_data = {
.slot[0] = {
.bus_width = 4,
- .detect_pin = -ENODEV,
+ .detect_pin = AT91_PIN_PC2,
.wp_pin = -ENODEV,
},
.slot[1] = {
.bus_width = 4,
- .detect_pin = -ENODEV,
+ .detect_pin = AT91_PIN_PC9,
.wp_pin = -ENODEV,
},
};
#else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .slot_b = 1, /* Only one slot so use slot B */
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PC9,
};
#endif
static struct gpio_led ek_leds[] = {
{ /* "bottom" led, green, userled1 to be defined */
.name = "ds5",
- .gpio = AT91_PIN_PB12,
+ .gpio = AT91_PIN_PB8,
.active_low = 1,
.default_trigger = "none",
},
{ /* "power" led, yellow */
.name = "ds1",
- .gpio = AT91_PIN_PB13,
+ .gpio = AT91_PIN_PB9,
.default_trigger = "heartbeat",
}
};
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
at91_add_device_mci(0, &ek_mmc_data);
+#else
+ at91_add_device_mmc(0, &ek_mmc_data);
+#endif
/* I2C */
at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
+#include <linux/io.h>
#include <mach/hardware.h>
setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, -1);
+ TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
/*
* Setup window for NAND controller.
return 166666667;
}
-static void kirkwood_timer_init(void)
+static void __init kirkwood_timer_init(void)
{
kirkwood_tclk = kirkwood_find_tclk();
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+ /*
+ * Disable propagation of mbus errors to the CPU local bus,
+ * as this causes mbus errors (which can occur for example
+ * for PCI aborts) to throw CPU aborts, which we're not set
+ * up to deal with.
+ */
+ writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
kirkwood_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
#include <mach/kirkwood.h>
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP 0x00000004
+
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_RESET 0x00000002
static inline void __iomem *__io(unsigned long addr)
{
- return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+ return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE)
+ KIRKWOOD_PCIE_IO_VIRT_BASE);
}
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
+#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
/*
kirkwood_ge00_init(&openrd_base_ge00_data);
kirkwood_sata_init(&openrd_base_sata_data);
kirkwood_sdio_init(&openrd_base_mvsdio_data);
+
+ kirkwood_i2c_init();
}
+static int __init openrd_base_pci_init(void)
+{
+ if (machine_is_openrd_base())
+ kirkwood_pcie_init();
+
+ return 0;
+ }
+subsys_initcall(openrd_base_pci_init);
+
+
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
.phys_io = KIRKWOOD_REGS_PHYS_BASE,
};
-static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
+static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct resource *res;
extern unsigned int kirkwood_clk_ctrl;
*/
res[0].name = "PCIe I/O Space";
res[0].flags = IORESOURCE_IO;
- res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+ res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
if (request_resource(&ioport_resource, &res[0]))
panic("Request PCIe IO resource failed\n");
*/
res[1].name = "PCIe Memory Space";
res[1].flags = IORESOURCE_MEM;
- res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE;
+ res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE;
res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1;
if (request_resource(&iomem_resource, &res[1]))
panic("Request PCIe Memory resource failed\n");
#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */
#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */
-#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
+#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */
#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */
#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */
#define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
/* PWM */
-#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2 MFP_CFG(GPIO27, AF2)
#define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2)
#define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2)
#define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2)
} else if (dev == MV78100_DEV_ID) {
if (rev == MV78100_REV_A0)
return "MV78100-A0";
+ else if (rev == MV78100_REV_A1)
+ return "MV78100-A1";
else
return "MV78100-Rev-Unsupported";
} else if (dev == MV78200_DEV_ID) {
#define MV78100_DEV_ID 0x7810
#define MV78100_REV_A0 1
+#define MV78100_REV_A1 2
#define MV78200_DEV_ID 0x7820
#define MV78200_REV_A0 1
/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
}
static int board_keymap[] = {
- /* col, row, code */
+ /* row, col, code */
KEY(0, 0, KEY_9),
- KEY(0, 1, KEY_0),
- KEY(0, 2, KEY_BACKSPACE),
- KEY(0, 3, KEY_O),
- KEY(0, 4, KEY_P),
- KEY(0, 5, KEY_K),
- KEY(0, 6, KEY_L),
- KEY(0, 7, KEY_ENTER),
- KEY(1, 0, KEY_8),
+ KEY(0, 1, KEY_8),
+ KEY(0, 2, KEY_I),
+ KEY(0, 3, KEY_J),
+ KEY(0, 4, KEY_N),
+ KEY(0, 5, KEY_M),
+ KEY(1, 0, KEY_0),
KEY(1, 1, KEY_7),
- KEY(1, 2, KEY_6),
- KEY(1, 3, KEY_5),
- KEY(1, 4, KEY_4),
- KEY(1, 5, KEY_3),
- KEY(1, 6, KEY_2),
- KEY(1, 7, KEY_1),
- KEY(2, 0, KEY_I),
- KEY(2, 1, KEY_U),
+ KEY(1, 2, KEY_U),
+ KEY(1, 3, KEY_H),
+ KEY(1, 4, KEY_B),
+ KEY(1, 5, KEY_SPACE),
+ KEY(2, 0, KEY_BACKSPACE),
+ KEY(2, 1, KEY_6),
KEY(2, 2, KEY_Y),
- KEY(2, 3, KEY_T),
- KEY(2, 4, KEY_R),
- KEY(2, 5, KEY_E),
- KEY(2, 6, KEY_W),
- KEY(2, 7, KEY_Q),
- KEY(3, 0, KEY_J),
- KEY(3, 1, KEY_H),
- KEY(3, 2, KEY_G),
+ KEY(2, 3, KEY_G),
+ KEY(2, 4, KEY_V),
+ KEY(2, 5, KEY_FN),
+ KEY(3, 0, KEY_O),
+ KEY(3, 1, KEY_5),
+ KEY(3, 2, KEY_T),
KEY(3, 3, KEY_F),
- KEY(3, 4, KEY_D),
- KEY(3, 5, KEY_S),
- KEY(3, 6, KEY_A),
- KEY(3, 7, KEY_LEFTSHIFT),
- KEY(4, 0, KEY_N),
- KEY(4, 1, KEY_B),
- KEY(4, 2, KEY_V),
- KEY(4, 3, KEY_C),
+ KEY(3, 4, KEY_C),
+ KEY(4, 0, KEY_P),
+ KEY(4, 1, KEY_4),
+ KEY(4, 2, KEY_R),
+ KEY(4, 3, KEY_D),
KEY(4, 4, KEY_X),
- KEY(4, 5, KEY_Z),
- KEY(4, 6, KEY_DOT),
- KEY(4, 7, KEY_COMMA),
- KEY(5, 0, KEY_M),
- KEY(5, 1, KEY_SPACE),
- KEY(5, 2, KEY_FN),
+ KEY(5, 0, KEY_K),
+ KEY(5, 1, KEY_3),
+ KEY(5, 2, KEY_E),
+ KEY(5, 3, KEY_S),
+ KEY(5, 4, KEY_Z),
+ KEY(6, 0, KEY_L),
+ KEY(6, 1, KEY_2),
+ KEY(6, 2, KEY_W),
+ KEY(6, 3, KEY_A),
+ KEY(6, 4, KEY_DOT),
+ KEY(7, 0, KEY_ENTER),
+ KEY(7, 1, KEY_1),
+ KEY(7, 2, KEY_Q),
+ KEY(7, 3, KEY_LEFTSHIFT),
+ KEY(7, 4, KEY_COMMA),
};
static struct matrix_keymap_data board_map_data = {
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
KEY(0, 0, KEY_E),
- KEY(1, 0, KEY_R),
- KEY(2, 0, KEY_T),
- KEY(3, 0, KEY_HOME),
- KEY(6, 0, KEY_I),
- KEY(7, 0, KEY_LEFTSHIFT),
- KEY(0, 1, KEY_D),
+ KEY(0, 1, KEY_R),
+ KEY(0, 2, KEY_T),
+ KEY(0, 3, KEY_HOME),
+ KEY(0, 6, KEY_I),
+ KEY(0, 7, KEY_LEFTSHIFT),
+ KEY(1, 0, KEY_D),
KEY(1, 1, KEY_F),
- KEY(2, 1, KEY_G),
- KEY(3, 1, KEY_SEND),
- KEY(6, 1, KEY_K),
- KEY(7, 1, KEY_ENTER),
- KEY(0, 2, KEY_X),
- KEY(1, 2, KEY_C),
+ KEY(1, 2, KEY_G),
+ KEY(1, 3, KEY_SEND),
+ KEY(1, 6, KEY_K),
+ KEY(1, 7, KEY_ENTER),
+ KEY(2, 0, KEY_X),
+ KEY(2, 1, KEY_C),
KEY(2, 2, KEY_V),
- KEY(3, 2, KEY_END),
- KEY(6, 2, KEY_DOT),
- KEY(7, 2, KEY_CAPSLOCK),
- KEY(0, 3, KEY_Z),
- KEY(1, 3, KEY_KPPLUS),
- KEY(2, 3, KEY_B),
+ KEY(2, 3, KEY_END),
+ KEY(2, 6, KEY_DOT),
+ KEY(2, 7, KEY_CAPSLOCK),
+ KEY(3, 0, KEY_Z),
+ KEY(3, 1, KEY_KPPLUS),
+ KEY(3, 2, KEY_B),
KEY(3, 3, KEY_F1),
- KEY(6, 3, KEY_O),
- KEY(7, 3, KEY_SPACE),
- KEY(0, 4, KEY_W),
- KEY(1, 4, KEY_Y),
- KEY(2, 4, KEY_U),
- KEY(3, 4, KEY_F2),
+ KEY(3, 6, KEY_O),
+ KEY(3, 7, KEY_SPACE),
+ KEY(4, 0, KEY_W),
+ KEY(4, 1, KEY_Y),
+ KEY(4, 2, KEY_U),
+ KEY(4, 3, KEY_F2),
KEY(4, 4, KEY_VOLUMEUP),
- KEY(6, 4, KEY_L),
- KEY(7, 4, KEY_LEFT),
- KEY(0, 5, KEY_S),
- KEY(1, 5, KEY_H),
- KEY(2, 5, KEY_J),
- KEY(3, 5, KEY_F3),
+ KEY(4, 6, KEY_L),
+ KEY(4, 7, KEY_LEFT),
+ KEY(5, 0, KEY_S),
+ KEY(5, 1, KEY_H),
+ KEY(5, 2, KEY_J),
+ KEY(5, 3, KEY_F3),
KEY(5, 5, KEY_VOLUMEDOWN),
- KEY(6, 5, KEY_M),
- KEY(4, 5, KEY_ENTER),
- KEY(7, 5, KEY_RIGHT),
- KEY(0, 6, KEY_Q),
- KEY(1, 6, KEY_A),
- KEY(2, 6, KEY_N),
- KEY(3, 6, KEY_BACKSPACE),
+ KEY(5, 6, KEY_M),
+ KEY(5, 7, KEY_ENTER),
+ KEY(6, 0, KEY_Q),
+ KEY(6, 1, KEY_A),
+ KEY(6, 2, KEY_N),
+ KEY(6, 3, KEY_BACKSPACE),
KEY(6, 6, KEY_P),
- KEY(7, 6, KEY_UP),
KEY(6, 7, KEY_SELECT),
- KEY(7, 7, KEY_DOWN),
- KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */
- KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */
- KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */
- KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */
- 0
+ KEY(7, 0, KEY_PROG1), /*MACRO 1 <User defined> */
+ KEY(7, 1, KEY_PROG2), /*MACRO 2 <User defined> */
+ KEY(7, 2, KEY_PROG3), /*MACRO 3 <User defined> */
+ KEY(7, 3, KEY_PROG4), /*MACRO 4 <User defined> */
+ KEY(7, 5, KEY_RIGHT),
+ KEY(7, 6, KEY_UP),
+ KEY(7, 7, KEY_DOWN)
};
static struct matrix_keymap_data board_map_data = {
unsigned long fint;
u16 f = 0;
- fint = clk->dpll_data->clk_ref->rate / (n + 1);
+ fint = clk->dpll_data->clk_ref->rate / n;
pr_debug("clock: fint is %lu\n", fint);
static struct clk dpll3_m2x2_ck = {
.name = "dpll3_m2x2_ck",
.ops = &clkops_null,
- .parent = &dpll3_x2_ck,
+ .parent = &dpll3_m2_ck,
.clkdm_name = "dpll3_clkdm",
- .recalc = &followparent_recalc,
+ .recalc = &omap3_clkoutx2_recalc,
};
/* The PWRDN bit is apparently only available on 3430ES2 and above */
if (r < 0)
goto out;
- gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1);
+ gpmc_cs_enable_mem(cs, res->start, resource_size(res));
*base = res->start;
gpmc_cs_set_reserved(cs, 1);
out:
void gpmc_cs_free(int cs)
{
spin_lock(&gpmc_mem_lock);
- if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) {
+ if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) {
printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
BUG();
spin_unlock(&gpmc_mem_lock);
dev_err(&pdev->dev, "invalid mem resource\n");
return -ENODEV;
}
- mbox_base = ioremap(res->start, res->end - res->start);
+ mbox_base = ioremap(res->start, resource_size(res));
if (!mbox_base)
return -ENOMEM;
#include <mach/colibri.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
+#include <mach/audio.h>
#include "generic.h"
#include "devices.h"
static inline void colibri_pxa320_init_lcd(void) {}
#endif
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || \
+ defined(CONFIG_SND_AC97_CODEC_MODULE)
static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
GPIO34_AC97_SYSCLK,
GPIO35_AC97_SDATA_IN_0,
static const struct ads7846_platform_data tsc2046_info = {
.model = 7846,
.vref_delay_usecs = 100,
- .pressure_max = 512,
+ .pressure_max = 1024,
.debounce_max = 10,
.debounce_tol = 3,
.debounce_rep = 1,
beq 1001f
bic \irqstat, \irqstat, #0x80000000
mov \irqnr, \irqstat, lsr #16
+ add \irqnr, \irqnr, #(PXA_IRQ(0))
1001:
.endm
#include "generic.h"
+#define MAX_INTERNAL_IRQS 128
+
#define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f)
#define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
#define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
{
int irq, i;
+ BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
+
pxa_internal_irq_nr = irq_nr;
for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
}
#ifdef CONFIG_PM
-static unsigned long saved_icmr[2];
+static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32];
+static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
{
saved_icmr[i] = _ICMR(irq);
_ICMR(irq) = 0;
}
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ saved_ipr[i] = IPR(i);
return 0;
}
_ICMR(irq) = saved_icmr[i];
_ICLR(irq) = 0;
}
+ for (i = 0; i < pxa_internal_irq_nr; i++)
+ IPR(i) = saved_ipr[i];
ICCR = 1;
return 0;
static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
.keymap_data = &palmtc_keymap_data,
- .col_gpios = palmtc_keypad_row_gpios,
- .num_col_gpios = 12,
- .row_gpios = palmtc_keypad_col_gpios,
- .num_row_gpios = 4,
+ .row_gpios = palmtc_keypad_row_gpios,
+ .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios),
+ .col_gpios = palmtc_keypad_col_gpios,
+ .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios),
.active_low = 1,
.debounce_ms = 20,
pxa_set_i2c_info(NULL);
}
+#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI)
+static struct nand_bbt_descr sharpsl_akita_bbt = {
+ .options = 0,
+ .offs = 4,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+static struct nand_ecclayout akita_oobinfo = {
+ .eccbytes = 24,
+ .eccpos = {
+ 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
+ 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
+ 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
+ .oobfree = {{0x08, 0x09}}
+};
+#endif
+
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
static void __init spitz_init(void)
{
spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+ if (machine_is_borzoi()) {
+ sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
+ sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
+ }
+
platform_scoop_config = &spitz_pcmcia_config;
common_init();
},
};
-static struct nand_bbt_descr sharpsl_akita_bbt = {
- .options = 0,
- .offs = 4,
- .len = 1,
- .pattern = scan_ff_pattern
-};
-
-static struct nand_ecclayout akita_oobinfo = {
- .eccbytes = 24,
- .eccpos = {
- 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11,
- 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23,
- 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37},
- .oobfree = {{0x08, 0x09}}
-};
-
static void __init akita_init(void)
{
spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
bool "Support RealView/PBX platform"
select ARM_GIC
select HAVE_PATA_PLATFORM
+ select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+ select ZONE_DMA if SPARSEMEM
help
Include support for the ARM(R) RealView PBX platform.
0x70000000, 256MB of which being mirrored at 0x00000000. If
the board supports 512MB of RAM, this option allows the
memory to be accessed contiguously at the high physical
- offset.
+ offset. On the PBX board, disabling this option allows 1GB of
+ RAM to be used with SPARSEMEM.
endmenu
/* used by entry-macro.S and platsmp.c */
void __iomem *gic_cpu_base_addr;
+#ifdef CONFIG_ZONE_DMA
+/*
+ * Adjust the zones if there are restrictions for DMA access.
+ */
+void __init realview_adjust_zones(int node, unsigned long *size,
+ unsigned long *hole)
+{
+ unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
+
+ if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
+ return;
+
+ size[ZONE_NORMAL] = size[0] - dma_size;
+ size[ZONE_DMA] = dma_size;
+ hole[ZONE_NORMAL] = hole[0];
+ hole[ZONE_DMA] = 0;
+}
+#endif
+
/*
* This is the RealView sched_clock implementation. This has
* a resolution of 41.7ns, and a maximum value of about 179s.
fb->panel = realview_clcd_panel();
fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
- &dma, GFP_KERNEL);
+ &dma, GFP_KERNEL | GFP_DMA);
if (!fb->fb.screen_base) {
printk(KERN_ERR "CLCD: unable to map framebuffer\n");
return -ENOMEM;
realview_clocksource_init();
realview_clockevents_init(timer_irq);
}
+
+/*
+ * Setup the memory banks.
+ */
+void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
+ struct meminfo *meminfo)
+{
+ /*
+ * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
+ * Half of this is mirrored at 0.
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+ meminfo->bank[0].start = 0x70000000;
+ meminfo->bank[0].size = SZ_512M;
+ meminfo->nr_banks = 1;
+#else
+ meminfo->bank[0].start = 0;
+ meminfo->bank[0].size = SZ_256M;
+ meminfo->nr_banks = 1;
+#endif
+}
#include <linux/amba/bus.h>
#include <linux/io.h>
+#include <asm/setup.h>
#include <asm/leds.h>
#define AMBA_DEVICE(name,busid,base,plat) \
/* .dma = base##_DMA,*/ \
}
+struct machine_desc;
+
extern struct platform_device realview_flash_device;
extern struct platform_device realview_cf_device;
extern struct platform_device realview_i2c_device;
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
extern int realview_usb_register(struct resource *res);
+extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags,
+ char **from, struct meminfo *meminfo);
extern void (*realview_reset)(char);
+
#endif
#define PHYS_OFFSET UL(0x00000000)
#endif
+#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
+extern void realview_adjust_zones(int node, unsigned long *size,
+ unsigned long *hole);
+#define arch_adjust_zones(node, size, hole) \
+ realview_adjust_zones(node, size, hole)
+
+#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1)
+#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M)
+#endif
+
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * Sparsemem definitions for RealView PBX.
+ *
+ * The RealView PBX board has another block of 512MB of RAM at 0x20000000,
+ * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000)
+ * may be used for DMA.
+ *
+ * The macros below define a section size of 256MB and a non-linear virtual to
+ * physical mapping:
+ *
+ * 256MB @ 0x00000000 -> PAGE_OFFSET
+ * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000
+ * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000
+ */
+#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET"
+#endif
+
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+/* bank page offsets */
+#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000)
+#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000)
+
+#define __phys_to_virt(phys) \
+ ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \
+ (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \
+ (phys) + PAGE_OFFSET)
+
+#define __virt_to_phys(virt) \
+ ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \
+ (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \
+ (virt) - PAGE_OFFSET)
+
+#endif /* CONFIG_SPARSEMEM */
+
#endif
* register. The BootMonitor waits for this register to become
* non-zero.
*/
-#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
- __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSS_OFFSET);
+ __io_address(REALVIEW_SYS_FLAGSSET));
mb();
}
.phys_io = REALVIEW_EB_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
+ .fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
.timer = &realview_eb_timer,
__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
}
+static void realview_pb1176_fixup(struct machine_desc *mdesc,
+ struct tag *tags, char **from,
+ struct meminfo *meminfo)
+{
+ /*
+ * RealView PB1176 only has 128MB of RAM mapped at 0.
+ */
+ meminfo->bank[0].start = 0;
+ meminfo->bank[0].size = SZ_128M;
+ meminfo->nr_banks = 1;
+}
+
static void __init realview_pb1176_init(void)
{
int i;
.phys_io = REALVIEW_PB1176_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
+ .fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pb1176_timer,
.phys_io = REALVIEW_PB11MP_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
+ .fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pb11mp_timer,
.phys_io = REALVIEW_PBA8_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
+ .fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pba8_timer,
.init = realview_pbx_timer_init,
};
+static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
+ char **from, struct meminfo *meminfo)
+{
+#ifdef CONFIG_SPARSEMEM
+ /*
+ * Memory configuration with SPARSEMEM enabled on RealView PBX (see
+ * asm/mach/memory.h for more information).
+ */
+ meminfo->bank[0].start = 0;
+ meminfo->bank[0].size = SZ_256M;
+ meminfo->bank[1].start = 0x20000000;
+ meminfo->bank[1].size = SZ_512M;
+ meminfo->bank[2].start = 0x80000000;
+ meminfo->bank[2].size = SZ_256M;
+ meminfo->nr_banks = 3;
+#else
+ realview_fixup(mdesc, tags, from, meminfo);
+#endif
+}
+
static void __init realview_pbx_init(void)
{
int i;
.phys_io = REALVIEW_PBX_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
+ .fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,
DMACH_MAX /* the end */
};
-static __inline__ int s3c_dma_has_circular(void)
+static __inline__ bool s3c_dma_has_circular(void)
{
- /* we will be supporting ciruclar buffers as soon as we have DMA
- * engine support.
- */
- return 1;
+ return true;
}
#define S3C2410_DMAF_CIRCULAR (1 << 0)
-static inline bool s3c_dma_has_circular(void)
-{
- return false;
-}
-
#include <plat/dma.h>
#endif /* __ASM_ARCH_IRQ_H */
depends on MACH_SMDK6410
select REGULATOR
select REGULATOR_WM8350
+ select S3C24XX_GPIO_EXTRA64
select MFD_WM8350_I2C
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8350_CONFIG_MODE_3
{
int i;
+ /* Configure the IRQ line */
+ s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
/* Instantiate the regulators */
for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
wm8350_register_regulator(wm8350,
};
static struct platform_device rtc_device = {
- .name = "rtc0",
+ .name = "rtc-coh901331",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
*/
__v7_setup:
#ifdef CONFIG_SMP
- mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and
- orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting
- mcr p15, 0, r0, c1, c0, 1
+ mrc p15, 0, r0, c1, c0, 1
+ tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
+ orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
+ mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
#endif
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, r7, r9, r11, lr}
}
/* FIXME: what's the actual transition time? */
- policy->cpuinfo.transition_latency = 10 * 1000 * 1000;
+ policy->cpuinfo.transition_latency = 300 * 1000;
return 0;
}
static inline void omap2_enable_irq_lch(int lch)
{
u32 val;
+ unsigned long flags;
if (!cpu_class_is_omap2())
return;
+ spin_lock_irqsave(&dma_chan_lock, flags);
val = dma_read(IRQENABLE_L0);
val |= 1 << lch;
dma_write(val, IRQENABLE_L0);
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
}
int omap_request_dma(int dev_id, const char *dev_name,
if (cpu_class_is_omap2()) {
u32 val;
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
/* Disable interrupts */
val = dma_read(IRQENABLE_L0);
val &= ~(1 << lch);
dma_write(val, IRQENABLE_L0);
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
/* Clear the CSR register and IRQ status register */
dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
{
int lch;
+ /*
+ * On OMAP1510, internal LCD controller will start the transfer
+ * when it gets enabled, so assume DMA running if LCD enabled.
+ */
+ if (cpu_is_omap1510())
+ if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
+ return 1;
+
/* Check if LCD DMA is running */
if (cpu_is_omap16xx())
if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
static int check_gpio(int gpio)
{
- if (unlikely(gpio_valid(gpio)) < 0) {
+ if (unlikely(gpio_valid(gpio) < 0)) {
printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
dump_stack();
return -1;
#ifndef __ASM_PLAT_MFP_H
#define __ASM_PLAT_MFP_H
-#define mfp_to_gpio(m) ((m) % 128)
+#define mfp_to_gpio(m) ((m) % 256)
/* list of all the configurable MFP pins */
enum {
{
unsigned long val, flags;
- BUG_ON(mfp >= MFP_PIN_MAX);
+ BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
val = mfpr_readl(mfp_table[mfp].mfpr_off);
{
unsigned long flags;
- BUG_ON(mfp >= MFP_PIN_MAX);
+ BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_writel(mfp_table[mfp].mfpr_off, val);
src = chan->dev_addr;
dst = data;
control0 = PL080_CONTROL_SRC_AHB2;
- control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
- control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
control0 |= PL080_CONTROL_DST_INCR;
break;
src = data;
dst = chan->dev_addr;
control0 = PL080_CONTROL_DST_AHB2;
- control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
- control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
control0 |= PL080_CONTROL_SRC_INCR;
break;
default:
control1 = size >> chan->hw_width; /* size in no of xfers */
control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */
control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */
+ control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+ control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
lli->src_addr = src;
lli->dst_addr = dst;
struct s3c64xx_dma_buff *next;
struct s3c64xx_dma_buff *buff;
struct pl080s_lli *lli;
+ unsigned long flags;
int ret;
WARN_ON(!chan);
s3c64xx_dma_fill_lli(chan, lli, data, size);
+ local_irq_save(flags);
+
if ((next = chan->next) != NULL) {
struct s3c64xx_dma_buff *end = chan->end;
struct pl080s_lli *endlli = end->lli;
s3c64xx_lli_to_regs(chan, lli);
}
+ local_irq_restore(flags);
+
show_lli(lli);
dbg_showchan(chan);
EXPORT_SYMBOL(s3c2410_dma_free);
-
-static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
-{
- struct s3c2410_dma_chan *chan = dmac->channels + offs;
-
- /* note, we currently do not bother to work out which buffer
- * or buffers have been completed since the last tc-irq. */
-
- if (chan->callback_fn)
- (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
-}
-
-static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
-{
- printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
-}
-
static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
{
struct s3c64xx_dmac *dmac = pw;
+ struct s3c2410_dma_chan *chan;
+ enum s3c2410_dma_buffresult res;
u32 tcstat, errstat;
u32 bit;
int offs;
errstat = readl(dmac->regs + PL080_ERR_STATUS);
for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+ struct s3c64xx_dma_buff *buff;
+
+ if (!(errstat & bit) && !(tcstat & bit))
+ continue;
+
+ chan = dmac->channels + offs;
+ res = S3C2410_RES_ERR;
+
if (tcstat & bit) {
writel(bit, dmac->regs + PL080_TC_CLEAR);
- s3c64xx_dma_tcirq(dmac, offs);
+ res = S3C2410_RES_OK;
}
- if (errstat & bit) {
- s3c64xx_dma_errirq(dmac, offs);
+ if (errstat & bit)
writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+ /* 'next' points to the buffer that is next to the
+ * currently active buffer.
+ * For CIRCULAR queues, 'next' will be same as 'curr'
+ * when 'end' is the active buffer.
+ */
+ buff = chan->curr;
+ while (buff && buff != chan->next
+ && buff->next != chan->next)
+ buff = buff->next;
+
+ if (!buff)
+ BUG();
+
+ if (buff == chan->next)
+ buff = chan->end;
+
+ s3c64xx_dma_bufffdone(chan, buff, res);
+
+ /* Free the node and update curr, if non-circular queue */
+ if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
+ chan->curr = buff->next;
+ s3c64xx_dma_freebuff(buff);
+ }
+
+ /* Update 'next' */
+ buff = chan->next;
+ if (chan->next == chan->end) {
+ chan->next = chan->curr;
+ if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
+ chan->end = NULL;
+ } else {
+ chan->next = buff->next;
}
}
select HAVE_IDE
select HAVE_OPROFILE
select INIT_ALL_POSSIBLE
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZMA
config SBUS
bool
#
-# linux/arch/sh/boot/compressed/Makefile
+# linux/arch/m32r/boot/compressed/Makefile
#
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
- piggy.o vmlinux.lds
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
+ vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
+
CFLAGS_misc.o += -fpic
ifdef CONFIG_MMU
OBJCOPYFLAGS += -R .empty_zero_page
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+suffix_$(CONFIG_KERNEL_GZIP) = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
$(call if_changed,ld)
* Adapted for SH by Stuart Menefy, Aug 1999
*
* 2003-02-12: Support M32R by Takeo Takahashi
- * This is based on arch/sh/boot/compressed/misc.c.
*/
-#include <linux/string.h>
-
/*
* gzip declarations
*/
-
-#define OF(args) args
#define STATIC static
#undef memset
#undef memcpy
#define memzero(s, n) memset ((s), 0, (n))
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize = 0; /* valid bytes in inbuf */
-static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
static void error(char *m);
-static unsigned char *input_data;
-static int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
#include "m32r_sio.c"
static unsigned long free_mem_ptr;
static unsigned long free_mem_end_ptr;
-#define HEAP_SIZE 0x10000
-
-#include "../../../../lib/inflate.c"
-
-void* memset(void* s, int c, size_t n)
+#ifdef CONFIG_KERNEL_BZIP2
+static void *memset(void *s, int c, size_t n)
{
- int i;
- char *ss = (char*)s;
+ char *ss = s;
- for (i=0;i<n;i++) ss[i] = c;
+ while (n--)
+ *ss++ = c;
return s;
}
+#endif
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
- if (insize != 0) {
- error("ran out of input data");
- }
-
- inbuf = input_data;
- insize = input_len;
- inptr = 1;
- return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#define BOOT_HEAP_SIZE 0x10000
+#include "../../../../lib/decompress_inflate.c"
+#endif
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
+#ifdef CONFIG_KERNEL_BZIP2
+#define BOOT_HEAP_SIZE 0x400000
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
+#ifdef CONFIG_KERNEL_LZMA
+#define BOOT_HEAP_SIZE 0x10000
+#include "../../../../lib/decompress_unlzma.c"
+#endif
static void error(char *x)
{
while(1); /* Halt */
}
-/* return decompressed size */
void
decompress_kernel(int mmu_on, unsigned char *zimage_data,
unsigned int zimage_len, unsigned long heap)
{
+ unsigned char *input_data = zimage_data;
+ int input_len = zimage_len;
+ unsigned char *output_data;
+
output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000
+ (mmu_on ? 0x80000000 : 0);
free_mem_ptr = heap;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- input_data = zimage_data;
- input_len = zimage_len;
+ free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE;
- makecrc();
- puts("Uncompressing Linux... ");
- gunzip();
- puts("Ok, booting the kernel.\n");
+ puts("\nDecompressing Linux... ");
+ decompress(input_data, input_len, NULL, NULL, output_data, NULL, error);
+ puts("done.\nBooting the kernel.\n");
}
if (mask & ~physids_coerce(phys_cpu_present_map))
BUG();
- if (ipi_num >= NR_IPIS)
+ if (ipi_num >= NR_IPIS || ipi_num < 0)
BUG();
mask <<= IPI_SHIFT;
count = 0;
count = (latch - count) * TICK_SIZE;
- elapsed_time = (count + latch / 2) / latch;
+ elapsed_time = DIV_ROUND_CLOSEST(count, latch);
/* NOTE: LATCH is equal to the "interval" value (= reload count). */
#else /* CONFIG_SMP */
p_count = count;
count = (latch - count) * TICK_SIZE;
- elapsed_time = (count + latch / 2) / latch;
+ elapsed_time = DIV_ROUND_CLOSEST(count, latch);
/* NOTE: LATCH is equal to the "interval" value (= reload count). */
#endif /* CONFIG_SMP */
#elif defined(CONFIG_CHIP_M32310)
bus_clock = boot_cpu_data.bus_clock;
divide = boot_cpu_data.timer_divide;
- latch = (bus_clock/divide + HZ / 2) / HZ;
+ latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ);
printk("Timer start : latch = %ld\n", latch);
_etext = .; /* End of text section */
EXCEPTION_TABLE(16)
+ NOTES
+
RODATA
RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .; /* End of data section */
config MIPS
bool
default y
+ select HAVE_GENERIC_DMA_COHERENT
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_ARCH_KGDB
static __init void prom_init_cmdline(void)
{
- char buf[CL_SIZE];
+ static char buf[CL_SIZE] __initdata;
/* Get the kernel command line from CFE */
if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Wed Mar 4 23:08:06 2009
+# Linux kernel version: 2.6.32-rc6
+# Sun Nov 8 22:59:47 2009
#
CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_AR7 is not set
# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MACH_EMMA is not set
+# CONFIG_NEC_MARKEINS is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_NXP_STB220 is not set
# CONFIG_NXP_STB225 is not set
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
CONFIG_MACH_TXX9=y
CONFIG_TOSHIBA_RBTX4927=y
CONFIG_TOSHIBA_RBTX4938=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_BIG_ENDIAN=y
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
+CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
#
#
# Power management options
#
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# Mapping drivers for chip access
#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
+CONFIG_MTD_RBTX4939=y
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_TXX9NDFMC=m
# CONFIG_MTD_ONENAND is not set
#
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NE2000=y
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_TXX9=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TX4939=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# SPI Protocol Masters
#
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_PCI is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC_TXX9ACLC=m
+CONFIG_HAS_TXX9_ACLC=y
+CONFIG_SND_SOC_TXX9ACLC_AC97=m
+CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_DAC124S085 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=y
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_TX4939=y
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_TXX9_DMAC=m
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#include <asm/scatterlist.h>
#include <asm/cache.h>
+#include <asm-generic/dma-coherent.h>
void *dma_alloc_noncoherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag);
extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
-#if 0
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
-
-extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
- dma_addr_t device_addr, size_t size, int flags);
-extern void dma_release_declared_memory(struct device *dev);
-extern void * dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size);
-#endif
-
#endif /* _ASM_DMA_MAPPING_H */
unsigned int mtflags;
int cpu;
struct clock_event_device *cd;
- unsigned long nextstamp = 0L;
+ unsigned long nextstamp;
unsigned long reference;
repeat:
+ nextstamp = 0L;
for_each_online_cpu(cpu) {
/*
* Find virtual CPUs within the current VPE who have
/*
* In the Linux kernel, we support selection of FPR format on the
- * basis of the Status.FR bit. This does imply that, if a full 32
- * FPRs are desired, there needs to be a flip-flop that can be written
- * to one at that bit position. In any case, O32 MIPS ABI uses
- * only the even FPRs (Status.FR = 0).
+ * basis of the Status.FR bit. If an FPU is not present, the FR bit
+ * is hardwired to zero, which would imply a 32-bit FPU even for
+ * 64-bit CPUs. For 64-bit kernels with no FPU we use TIF_32BIT_REGS
+ * as a proxy for the FR bit so that a 64-bit FPU is emulated. In any
+ * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the
+ * even FPRs are used (Status.FR = 0).
*/
-
-#define CP0_STATUS_FR_SUPPORT
-
-#ifdef CP0_STATUS_FR_SUPPORT
-#define FR_BIT ST0_FR
+static inline int cop1_64bit(struct pt_regs *xcp)
+{
+ if (cpu_has_fpu)
+ return xcp->cp0_status & ST0_FR;
+#ifdef CONFIG_64BIT
+ return !test_thread_flag(TIF_32BIT_REGS);
#else
-#define FR_BIT 0
+ return 0;
#endif
+}
+
+#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \
+ (int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32))
-#define SIFROMREG(si, x) ((si) = \
- (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
- (int)ctx->fpr[x] : \
- (int)(ctx->fpr[x & ~1] >> 32 ))
-#define SITOREG(si, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \
- (xcp->cp0_status & FR_BIT) || !(x & 1) ? \
+#define SITOREG(si, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \
+ cop1_64bit(xcp) || !(x & 1) ? \
ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \
ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32)
-#define DIFROMREG(di, x) ((di) = \
- ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)])
-#define DITOREG(di, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \
- = (di))
+#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)])
+#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di))
#define SPFROMREG(sp, x) SIFROMREG((sp).bits, x)
#define SPTOREG(sp, x) SITOREG((sp).bits, x)
{
void *ret;
+ if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+ return ret;
+
gfp = massage_gfp_flags(dev, gfp);
ret = (void *) __get_free_pages(gfp, get_order(size));
dma_addr_t dma_handle)
{
unsigned long addr = (unsigned long) vaddr;
+ int order = get_order(size);
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
{
char *memsize_str;
unsigned int memsize;
- char cmdline[CL_SIZE], *ptr;
+ char *ptr;
+ static char cmdline[CL_SIZE] __initdata;
/* otherwise look in the environment */
memsize_str = prom_getenv("memsize");
void __init prom_setup_cmdline(void)
{
- char cmd_line[CL_SIZE];
+ static char cmd_line[CL_SIZE] __initdata;
char *cp, *board;
int prom_argc;
char **prom_argv, **prom_envp;
int argc;
int *argv32;
int i; /* Always ignore the "-c" at argv[0] */
- char builtin[CL_SIZE];
+ static char builtin[CL_SIZE] __initdata;
if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
/*
static void __init preprocess_cmdline(void)
{
- char cmdline[CL_SIZE];
+ static char cmdline[CL_SIZE] __initdata;
char *s;
strcpy(cmdline, arcs_cmdline);
#define F_SETOWN 12 /* for sockets. */
#define F_SETSIG 13 /* for sockets. */
#define F_GETSIG 14 /* for sockets. */
-#define F_GETOWN_EX 15
-#define F_SETOWN_EX 16
/* for posix fcntl() and lockf() */
#define F_RDLCK 01
bool
default y
+config NR_IRQS
+ int "Number of virtual interrupt numbers"
+ range 32 512
+ default "512"
+ help
+ This defines the number of virtual interrupt numbers the kernel
+ can manage. Virtual interrupt numbers are what you see in
+ /proc/interrupts. If you configure your system to have too few,
+ drivers will fail to load or worse - handle with care.
+
config STACKTRACE_SUPPORT
bool
default y
config REDBOOT
bool
-config HIBERNATE_32
- bool
- depends on (PPC_PMAC && !SMP) || BROKEN
- default y
-
-config HIBERNATE_64
- bool
- depends on BROKEN || (PPC_PMAC64 && EXPERIMENTAL)
- default y
-
config ARCH_HIBERNATION_POSSIBLE
bool
- depends on (PPC64 && HIBERNATE_64) || (PPC32 && HIBERNATE_32)
default y
config ARCH_SUSPEND_POSSIBLE
def_bool y
- depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
+ depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
+ PPC_85xx || PPC_86xx
config PPC_DCR_NATIVE
bool
Say N if you are unsure.
+config ARCH_CPU_PROBE_RELEASE
+ def_bool y
+ depends on HOTPLUG_CPU
+
config ARCH_ENABLE_MEMORY_HOTPLUG
def_bool y
CPU. Generally saying Y is safe, although some problems have been
reported with SMP Power Macintoshes with this option enabled.
+config SPARSE_IRQ
+ bool "Support sparse irq numbering"
+ default y
+ help
+ This enables support for sparse irqs. This is useful for distro
+ kernels that want to define a high CONFIG_NR_CPUS value but still
+ want to have low kernel memory footprint on smaller machines.
+
+ ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread
+ out the irq_desc[] array in a more NUMA-friendly way. )
+
+ If you don't know what to do here, say Y.
+
config NUMA
bool "NUMA support"
depends on PPC64
config ARCH_POPULATES_NODE_MAP
def_bool y
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y
+ depends on PPC_BOOK3S_64
+
source "mm/Kconfig"
config ARCH_MEMORY_PROBE
select PPC_INDIRECT_PCI
select PCI_QUIRKS
+config FSL_PMC
+ bool
+ default y
+ depends on SUSPEND && (PPC_85xx || PPC_86xx)
+ help
+ Freescale MPC85xx/MPC86xx power management controller support
+ (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
+
config 4xx_SOC
bool
return 64;
}
-void get4k(FILE *file, char *buf )
+static void get4k(FILE *file, char *buf )
{
unsigned j;
unsigned num = fread(buf, 1, 4096, file);
buf[j] = 0;
}
-void put4k(FILE *file, char *buf )
+static void put4k(FILE *file, char *buf )
{
fwrite(buf, 1, 4096, file);
}
-void death(const char *msg, FILE *fdesc, const char *fname)
+static void death(const char *msg, FILE *fdesc, const char *fname)
{
fprintf(stderr, msg);
fclose(fdesc);
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
};
};
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
fpga@4,0 {
compatible = "gef,ppc9a-fpga-regs";
reg = <0x4 0x0 0x40>;
};
};
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
fpga@4,0 {
compatible = "gef,fpga-regs";
reg = <0x4 0x0 0x40>;
6 0 0xfd000000 0x00800000 // IO FPGA (8-bit)
7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit)
+ nvram@3,0 {
+ device_type = "nvram";
+ compatible = "simtek,stk14ca8";
+ reg = <0x3 0x0 0x20000>;
+ };
+
fpga@4,0 {
compatible = "gef,fpga-regs";
reg = <0x4 0x0 0x40>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
/ {
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
model = "amcc,katmai";
compatible = "amcc,katmai";
dcr-parent = <&{/cpus/cpu@0}>;
memory {
device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
+ reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ /* addr-child addr-parent size */
+ ranges = <0x4 0xe0000000 0x4 0xe0000000 0x20000000
+ 0xc 0x00000000 0xc 0x00000000 0x20000000
+ 0xd 0x00000000 0xd 0x00000000 0x80000000
+ 0xd 0x80000000 0xd 0x80000000 0x80000000
+ 0xe 0x00000000 0xe 0x00000000 0x80000000
+ 0xe 0x80000000 0xe 0x80000000 0x80000000
+ 0xf 0x00000000 0xf 0x00000000 0x80000000
+ 0xf 0x80000000 0xf 0x80000000 0x80000000>;
clock-frequency = <0>; /* Filled in by zImage */
SDRAM0: sdram {
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; /* Filled in by U-Boot */
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x0000003f>; /* Start at 6 */
rgmii-device = <&RGMII0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
+ sleep = <&pmc 0x03000000>;
};
ipic: pic@700 {
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
+ sleep = <&pmc 0x03000000>;
};
ipic:pic@700 {
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
+ sleep = <&pmc 0x03000000>;
};
ipic: pic@700 {
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
+ sleep = <&pmc 0x03000000>;
};
ipic: interrupt-controller@700 {
0xa800 0 0 2 &ipic 20 8
0xa800 0 0 3 &ipic 21 8
0xa800 0 0 4 &ipic 18 8>;
+ sleep = <&pmc 0x00010000>;
/* filled by u-boot */
bus-range = <0 0>;
clock-frequency = <0>;
device-width = <1>;
partition@0 {
- reg = <0 0x8000>;
+ reg = <0 0x80000>;
label = "u-boot";
read-only;
};
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
interrupts = <16 2>;
};
- i2c@3000 {
+ i2c-sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <3 1>;
+ interrupt-parent = <&mpic>;
+ };
};
- };
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
};
dma@21300 {
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
+ sleep = <&pmc 0x00000400>;
+
dma-channel@0 {
compatible = "fsl,mpc8568-dma-channel",
"fsl,eloplus-dma-channel";
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
+ sleep = <&pmc 0x00000080>;
mdio@520 {
#address-cells = <1>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
+ sleep = <&pmc 0x00000040>;
mdio@520 {
#address-cells = <1>;
};
};
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ duart-sleep-nexus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
};
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8548-guts";
+ global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
- };
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ pmc: power@70 {
+ compatible = "fsl,mpc8568-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
};
crypto@30000 {
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xfe>;
fsl,descriptor-types-mask = <0x12b0ebf>;
+ sleep = <&pmc 0x01000000>;
};
mpic: pic@40000 {
compatible = "fsl,qe";
ranges = <0x0 0xe0080000 0x40000>;
reg = <0xe0080000 0x480>;
+ sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <396000000>;
fsl,qe-num-riscs = <2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+ sleep = <&pmc 0x80000000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+ sleep = <&pmc 0x20000000>;
clock-frequency = <33333333>;
#interrupt-cells = <1>;
#size-cells = <2>;
55 2 /* msg2_tx */
56 2 /* msg2_rx */>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00080000 /* controller */
+ &pmc 0x00040000>; /* message unit */
};
};
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
+ sleep = <&pmc 0x00008000 // core
+ &pmc 0x00004000>; // timebase
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
reg = <0xe0005000 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x08000000>;
ranges = <0x0 0x0 0xfe000000 0x02000000
0x1 0x0 0xf8000000 0x00008000
interrupts = <18 2>;
};
- i2c@3000 {
+ i2c-sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000004>;
+ ranges;
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ interrupts = <3 1>;
+ interrupt-parent = <&mpic>;
+ };
+ };
- rtc@68 {
- compatible = "dallas,ds1374";
- reg = <0x68>;
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
};
};
- i2c@3100 {
+ duart-sleep-nexus {
#address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ sleep = <&pmc 0x00000002>;
+ ranges;
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
};
L2: l2-cache-controller@20000 {
reg = <0x2e000 0x1000>;
interrupts = <72 0x8>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00200000>;
/* Filled in by U-Boot */
clock-frequency = <0>;
status = "disabled";
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xbfe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
+ sleep = <&pmc 0x01000000>;
};
mpic: pic@40000 {
};
global-utilities@e0000 {
- compatible = "fsl,mpc8569-guts";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8569-pmc",
+ "fsl,mpc8548-pmc";
+ reg = <0x70 0x20>;
+ };
};
par_io@e0100 {
compatible = "fsl,qe";
ranges = <0x0 0xe0080000 0x40000>;
reg = <0xe0080000 0x480>;
+ sleep = <&pmc 0x00000800>;
brg-frequency = <0>;
bus-frequency = <0>;
fsl,qe-num-riscs = <4>;
&qe_pio_f 5 0 /* USBTN */
&qe_pio_f 6 0 /* USBRP */
&qe_pio_f 8 0 /* USBRN */
- &bcsr17 6 0 /* SPEED */
- &bcsr17 5 1>; /* POWER */
+ &bcsr17 1 0 /* SPEED */
+ &bcsr17 2 0>; /* POWER */
};
enet0: ucc@2000 {
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+ sleep = <&pmc 0x20000000>;
clock-frequency = <33333333>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
55 2 /* msg2_tx */
56 2 /* msg2_rx */>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00080000>;
};
};
i-cache-line-size = <32>;
d-cache-size = <32768>; // L1
i-cache-size = <32768>; // L1
+ sleep = <&pmc 0x00008000 0 // core
+ &pmc 0x00004000 0>; // timebase
timebase-frequency = <0>; // From uboot
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
5 0 0xe8480000 0x00008000
6 0 0xe84c0000 0x00008000
3 0 0xe8000000 0x00000020>;
+ sleep = <&pmc 0x08000000 0>;
flash@0,0 {
compatible = "cfi-flash";
compatible = "fsl,fpga-pixis";
reg = <3 0 0x20>;
ranges = <0 3 0 0x20>;
+ interrupt-parent = <&mpic>;
+ interrupts = <8 8>;
sdcsr_pio: gpio-controller@a {
#gpio-cells = <2>;
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000004 0>;
dfsrr;
};
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000002 0>;
};
serial1: serial@4600 {
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x00000008 0>;
};
spi@7000 {
interrupt-parent = <&mpic>;
mode = "cpu";
gpios = <&sdcsr_pio 7 0>;
+ sleep = <&pmc 0x00000800 0>;
mmc-slot@0 {
compatible = "fsl,mpc8610hpcd-mmc-slot",
reg = <0x2c000 100>;
interrupts = <72 2>;
interrupt-parent = <&mpic>;
+ sleep = <&pmc 0x04000000 0>;
};
mpic: interrupt-controller@40000 {
};
global-utilities@e0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
compatible = "fsl,mpc8610-guts";
reg = <0xe0000 0x1000>;
+ ranges = <0 0xe0000 0x1000>;
fsl,has-rstcr;
+
+ pmc: power@70 {
+ compatible = "fsl,mpc8610-pmc",
+ "fsl,mpc8641d-pmc";
+ reg = <0x70 0x20>;
+ };
};
wdt@e4000 {
fsl,playback-dma = <&dma00>;
fsl,capture-dma = <&dma01>;
fsl,fifo-depth = <8>;
+ sleep = <&pmc 0 0x08000000>;
};
ssi@16100 {
interrupt-parent = <&mpic>;
interrupts = <63 2>;
fsl,fifo-depth = <8>;
+ sleep = <&pmc 0 0x04000000>;
};
dma@21300 {
cell-index = <0>;
reg = <0x21300 0x4>; /* DMA general status register */
ranges = <0x0 0x21100 0x200>;
+ sleep = <&pmc 0x00000400 0>;
dma00: dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
+ sleep = <&pmc 0x00000200 0>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>;
+ sleep = <&pmc 0x80000000 0>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
bus-range = <1 3>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+ sleep = <&pmc 0x40000000 0>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
0x0000 0 0 4 &mpic 7 1>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
+ sleep = <&pmc 0x20000000 0>;
clock-frequency = <33333333>;
};
};
--- /dev/null
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P1020";
+ compatible = "fsl,P1020RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition@40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition@f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand@1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition@0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition@200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition@1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ modal = "s25sl128b";
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ usb@23000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <46 0x2>;
+ phy_type = "ulpi";
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi@41600 {
+ compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P2020 RDB Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb,
+ * eth1, eth2, sdhc, crypto, global-util, pci0.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,p2020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,p2020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ };
+
+ spi@7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ modal = "s25sl128b";
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition@0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition@80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition@100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition@500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition@900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ gpio: gpio-controller@f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ usb@22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet1: ethernet@25000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ ranges = <0x0 0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "sgmii";
+
+ };
+
+ enet2: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ sdhci@2e000 {
+ compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ protected-sources = <
+ 42 76 77 78 79 /* serial1 , dma2 */
+ 29 30 34 26 /* enet0, pci1 */
+ 0xe0 0xe1 0xe2 0xe3 /* msi */
+ 0xe4 0xe5 0xe6 0xe7
+ >;
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,p2020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie@ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P2020 RDB Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth0, pci1, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,P2020";
+ compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &enet0;
+ serial0 = &serial0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P2020@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p2020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ serial0: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,p2020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2,512K
+ interrupt-parent = <&mpic>;
+ };
+
+
+ enet0: ethernet@24000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ ranges = <0x0 0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ protected-sources = <
+ 17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */
+ 16 20 21 22 23 28 /* L2, dma1, USB */
+ 03 35 36 40 31 32 33 /* mdio, enet1, enet2 */
+ 72 45 58 25 /* sdhci, crypto , pci */
+ >;
+ };
+
+ msi@41600 {
+ compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ pci1: pcie@ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * P4080DS Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "fsl,P4080DS";
+ compatible = "fsl,P4080DS";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ccsr = &soc;
+
+ serial0 = &serial0;
+ serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ usb0 = &usb0;
+ usb1 = &usb1;
+ dma0 = &dma0;
+ dma1 = &dma1;
+ sdhc = &sdhc;
+
+ rio0 = &rapidio0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: PowerPC,4080@0 {
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ };
+ };
+ cpu1: PowerPC,4080@1 {
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ };
+ };
+ cpu2: PowerPC,4080@2 {
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2_2>;
+ L2_2: l2-cache {
+ };
+ };
+ cpu3: PowerPC,4080@3 {
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2_3>;
+ L2_3: l2-cache {
+ };
+ };
+ cpu4: PowerPC,4080@4 {
+ device_type = "cpu";
+ reg = <4>;
+ next-level-cache = <&L2_4>;
+ L2_4: l2-cache {
+ };
+ };
+ cpu5: PowerPC,4080@5 {
+ device_type = "cpu";
+ reg = <5>;
+ next-level-cache = <&L2_5>;
+ L2_5: l2-cache {
+ };
+ };
+ cpu6: PowerPC,4080@6 {
+ device_type = "cpu";
+ reg = <6>;
+ next-level-cache = <&L2_6>;
+ L2_6: l2-cache {
+ };
+ };
+ cpu7: PowerPC,4080@7 {
+ device_type = "cpu";
+ reg = <7>;
+ next-level-cache = <&L2_7>;
+ L2_7: l2-cache {
+ };
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ soc: soc@ffe000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+ reg = <0xf 0xfe000000 0 0x00001000>;
+
+ corenet-law@0 {
+ compatible = "fsl,corenet-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <32>;
+ };
+
+ memory-controller@8000 {
+ compatible = "fsl,p4080-memory-controller";
+ reg = <0x8000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x12 2>;
+ };
+
+ memory-controller@9000 {
+ compatible = "fsl,p4080-memory-controller";
+ reg = <0x9000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <0x12 2>;
+ };
+
+ corenet-cf@18000 {
+ compatible = "fsl,corenet-cf";
+ reg = <0x18000 0x1000>;
+ fsl,ccf-num-csdids = <32>;
+ fsl,ccf-num-snoopids = <32>;
+ };
+
+ iommu@20000 {
+ compatible = "fsl,p4080-pamu";
+ reg = <0x20000 0x10000>;
+ interrupts = <24 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ dma0: dma@100300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
+ reg = <0x100300 0x4>;
+ ranges = <0x0 0x100100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <29 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <30 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <31 2>;
+ };
+ };
+
+ dma1: dma@101300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p4080-dma", "fsl,eloplus-dma";
+ reg = <0x101300 0x4>;
+ ranges = <0x0 0x101100 0x200>;
+ cell-index = <1>;
+ dma-channel@0 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <32 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <33 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <34 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,p4080-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <35 2>;
+ };
+ };
+
+ spi@110000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x110000 0x1000>;
+ interrupts = <53 0x2>;
+ interrupt-parent = <&mpic>;
+ espi,num-ss-bits = <4>;
+ mode = "cpu";
+
+ fsl_m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ spi-max-frequency = <40000000>; /* input clock */
+ partition@u-boot {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@kernel {
+ label = "kernel";
+ reg = <0x00100000 0x00500000>;
+ read-only;
+ };
+ partition@dtb {
+ label = "dtb";
+ reg = <0x00600000 0x00100000>;
+ read-only;
+ };
+ partition@fs {
+ label = "file system";
+ reg = <0x00700000 0x00900000>;
+ };
+ };
+ };
+
+ sdhc: sdhc@114000 {
+ compatible = "fsl,p4080-esdhc", "fsl,esdhc";
+ reg = <0x114000 0x1000>;
+ interrupts = <48 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i2c@118000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x118000 0x100>;
+ interrupts = <38 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@118100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x118100 0x100>;
+ interrupts = <38 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ eeprom@51 {
+ compatible = "at24,24c256";
+ reg = <0x51>;
+ };
+ eeprom@52 {
+ compatible = "at24,24c256";
+ reg = <0x52>;
+ };
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <0 0x1>;
+ interrupt-parent = <&mpic>;
+ };
+ };
+
+ i2c@119000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <2>;
+ compatible = "fsl-i2c";
+ reg = <0x119000 0x100>;
+ interrupts = <39 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@119100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <3>;
+ compatible = "fsl-i2c";
+ reg = <0x119100 0x100>;
+ interrupts = <39 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@11c500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@11c600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11c600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <36 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial2: serial@11d500 {
+ cell-index = <2>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial3: serial@11d600 {
+ cell-index = <3>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x11d600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <37 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ gpio0: gpio@130000 {
+ compatible = "fsl,p4080-gpio";
+ reg = <0x130000 0x1000>;
+ interrupts = <55 2>;
+ interrupt-parent = <&mpic>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ usb0: usb@210000 {
+ compatible = "fsl,p4080-usb2-mph",
+ "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+ reg = <0x210000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <44 0x2>;
+ phy_type = "ulpi";
+ };
+
+ usb1: usb@211000 {
+ compatible = "fsl,p4080-usb2-dr",
+ "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+ reg = <0x211000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <45 0x2>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+ };
+
+ rapidio0: rapidio@ffe0c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "fsl,rapidio-delta";
+ reg = <0xf 0xfe0c0000 0 0x20000>;
+ ranges = <0 0 0xf 0xf5000000 0 0x01000000>;
+ interrupt-parent = <&mpic>;
+ /* err_irq bell_outb_irq bell_inb_irq
+ msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+ interrupts = <16 2 56 2 57 2 60 2 61 2 62 2 63 2>;
+ };
+
+ localbus@ffe124000 {
+ compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xf 0xfe124000 0 0x1000>;
+ interrupts = <25 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xf 0xe8000000 0x08000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ };
+ };
+
+ pci0: pcie@ffe200000 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xfe200000 0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+ clock-frequency = <0x1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 40 1
+ 0000 0 0 2 &mpic 1 1
+ 0000 0 0 3 &mpic 2 1
+ 0000 0 0 4 &mpic 3 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci1: pcie@ffe201000 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xfe201000 0 0x1000>;
+ bus-range = <0 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+ 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+ clock-frequency = <0x1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 41 1
+ 0000 0 0 2 &mpic 5 1
+ 0000 0 0 3 &mpic 6 1
+ 0000 0 0 4 &mpic 7 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+ pci2: pcie@ffe202000 {
+ compatible = "fsl,p4080-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xf 0xfe202000 0 0x1000>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+ 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+ clock-frequency = <0x1fca055>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0 0 1 &mpic 42 1
+ 0000 0 0 2 &mpic 9 1
+ 0000 0 0 3 &mpic 10 1
+ 0000 0 0 4 &mpic 11 1
+ >;
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0xe0000000
+ 0x02000000 0 0xe0000000
+ 0 0x20000000
+
+ 0x01000000 0 0x00000000
+ 0x01000000 0 0x00000000
+ 0 0x00010000>;
+ };
+ };
+
+};
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
- /* pci1 doesn't have a corresponding physical connector */
- pci2 = &pci2;
+ pci1 = &pci1;
};
cpus {
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
- clock-frequency = <66666666>;
+ clock-frequency = <66000000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
};
- pci2: pcie@e000a000 {
+ pci1: pcie@e000a000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
interrupt-parent = <&mpic>;
interrupts = <0x1a 0x2>;
bus-range = <0x0 0xff>;
- ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>;
- clock-frequency = <33333333>;
+ ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
+ clock-frequency = <33000000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x02000000 0x0 0xa0000000
0x02000000 0x0 0xa0000000
- 0x0 0x20000000
+ 0x0 0x10000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
- 0x0 0x08000000>;
+ 0x0 0x00800000>;
};
};
};
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:02 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:20 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:03 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:21 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:04 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:22 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:05 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:23 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:06 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:24 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:07 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:24 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_WBSD is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
# CONFIG_MMC_CB710 is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:07 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:25 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:08 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:26 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_PCF8574=y
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:09 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:27 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:28 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:12 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:30 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:11 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:29 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:13 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:30 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Tue Aug 11 19:57:51 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:31 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:14 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:32 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
CONFIG_KSI8560=y
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_GIANFAR=y
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:15 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:33 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:16 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:34 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:17 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:35 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:18 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:36 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:19 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:37 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:19 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:37 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
CONFIG_SOCRATES=y
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:20 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:38 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NET_POCKET is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_FS_ENET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_TPS65010 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
CONFIG_AGP=m
+CONFIG_VGA_ARB=y
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:21 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:39 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:22 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:40 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_FS_ENET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:23 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:41 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:24 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:42 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_FS_ENET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:25 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:43 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_XES_MPC85xx is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_FS_ENET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:25 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:44 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_SMP=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_MPC85xx_RDB is not set
# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
CONFIG_XES_MPC85xx=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_ISP1760_HCD=y
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:31 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:49 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:29 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:47 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:30 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:48 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_NVRAM is not set
+CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_ATM is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:27 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:45 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:28 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:46 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_BINFMT_MISC=m
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:26 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:45 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:47 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:04 2009
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_8XX_MINIMAL_FPEMU is not set
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:48 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:05 2009
#
# CONFIG_PPC64 is not set
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
# CONFIG_SMP is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_CHECK_CACHE_COHERENCY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
+# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_SENSORS_PCF8574=m
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:49 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:06 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:49 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:07 2009
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:50 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:08 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
-# CONFIG_SLOW_WORK is not set
+CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Fri Aug 7 08:19:15 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:09 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_PCF8575 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:52 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:10 2009
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
# CONFIG_FS_ENET_HAS_FEC is not set
# CONFIG_FS_ENET_MDIO_FEC is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:53 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:10 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:54 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:11 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_SBC8240 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:55 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:12 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
+CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_OF_PARTS=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
# Hash modes
#
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:55 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:25:20 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
+CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
CONFIG_MPC85xx_RDB=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
-# CONFIG_XES_MPC85xx is not set
+CONFIG_XES_MPC85xx=y
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_MATH_EMULATION=y
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
+CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
+CONFIG_RAPIDIO=y
+CONFIG_RAPIDIO_DISC_TIMEOUT=30
#
# Advanced setup
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
+CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
+CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
+# CONFIG_RIONET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:56 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:26:01 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_SMP=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
+CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
+CONFIG_MPC85xx_RDB=y
CONFIG_SOCRATES=y
CONFIG_KSI8560=y
-# CONFIG_XES_MPC85xx is not set
+CONFIG_XES_MPC85xx=y
CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_MATH_EMULATION=y
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
+CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
-# CONFIG_RAPIDIO is not set
+CONFIG_RAPIDIO=y
+CONFIG_RAPIDIO_DISC_TIMEOUT=30
#
# Advanced setup
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
+CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
+CONFIG_INET_ESP=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
-# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
+# CONFIG_RIONET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:57 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:15 2009
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FEC=y
# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:58 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:16 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_BINFMT_MISC=m
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:59 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:17 2009
#
# CONFIG_PPC64 is not set
# CONFIG_E200 is not set
CONFIG_8xx=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_8XX_MINIMAL_FPEMU=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 27 16:08:06 2008
+# Linux kernel version: 2.6.32-rc3
+# Tue Oct 6 10:27:18 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S_64=y
+# CONFIG_PPC_BOOK3E_64 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_POWER4_ONLY=y
CONFIG_POWER4=y
# CONFIG_TUNE_CELL is not set
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_64=y
CONFIG_PPC_MM_SLICES=y
# CONFIG_VIRT_CPU_ACCOUNTING is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_64BIT=y
CONFIG_WORD_SIZE=64
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
# CONFIG_PPC_OF_PLATFORM_PCI is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PPC_CELLEB is not set
+# CONFIG_PPC_CELL_QPACE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
#
CONFIG_PPC_PASEMI_CPUFREQ=y
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_HAS_HASH_64K=y
+# CONFIG_PPC_4K_PAGES is not set
+# CONFIG_PPC_16K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=y
CONFIG_ELECTRA_CF=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_PARTITIONS is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
CONFIG_PATA_PCMCIA=y
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
CONFIG_PASEMI_MAC=y
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=4
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_PASEMI=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PASEMI=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
CONFIG_DRM=y
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_RAWMIDI_SEQ=y
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
CONFIG_SND_USB_USX2Y=y
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_PASEMI=y
+# CONFIG_EDAC_CPC925 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
#
# File systems
#
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:00 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:17 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_SBC8240 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:01 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:18 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_BINFMT_MISC=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SWIOTLB is not set
-CONFIG_PPC_NEED_DMA_SYNC_OPS=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:01 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Nov 5 08:20:19 2009
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
# CONFIG_CRYPTO is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#include <linux/compiler.h>
#include <linux/types.h>
+#include <linux/errno.h>
#include <linux/of.h>
+/*
+ * USB Controller pram common to QE and CPM.
+ */
+struct usb_ctlr {
+ u8 usb_usmod;
+ u8 usb_usadr;
+ u8 usb_uscom;
+ u8 res1[1];
+ __be16 usb_usep[4];
+ u8 res2[4];
+ __be16 usb_usber;
+ u8 res3[2];
+ __be16 usb_usbmr;
+ u8 res4[1];
+ u8 usb_usbs;
+ /* Fields down below are QE-only */
+ __be16 usb_ussft;
+ u8 res5[2];
+ __be16 usb_usfrn;
+ u8 res6[0x22];
+} __attribute__ ((packed));
+
+/*
+ * Function code bits, usually generic to devices.
+ */
+#ifdef CONFIG_CPM1
+#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */
+#else
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+#endif
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+
/* Opcodes common to CPM1 and CPM2
*/
#define CPM_CR_INIT_TRX ((ushort)0x0000)
#define BD_I2C_START (0x0400)
int cpm_muram_init(void);
+
+#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE)
unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
int cpm_muram_free(unsigned long offset);
unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
unsigned long cpm_muram_offset(void __iomem *addr);
dma_addr_t cpm_muram_dma(void __iomem *addr);
+#else
+static inline unsigned long cpm_muram_alloc(unsigned long size,
+ unsigned long align)
+{
+ return -ENOSYS;
+}
+
+static inline int cpm_muram_free(unsigned long offset)
+{
+ return -ENOSYS;
+}
+
+static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset,
+ unsigned long size)
+{
+ return -ENOSYS;
+}
+
+static inline void __iomem *cpm_muram_addr(unsigned long offset)
+{
+ return NULL;
+}
+
+static inline unsigned long cpm_muram_offset(void __iomem *addr)
+{
+ return -ENOSYS;
+}
+
+static inline dma_addr_t cpm_muram_dma(void __iomem *addr)
+{
+ return 0;
+}
+#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */
+
+#ifdef CONFIG_CPM
int cpm_command(u32 command, u8 opcode);
+#else
+static inline int cpm_command(u32 command, u8 opcode)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_CPM */
int cpm2_gpiochip_add32(struct device_node *np);
char res2[2]; /* Reserved */
} iic_t;
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res;
- ushort spi_rpbase; /* Relocation pointer */
- ushort spi_res2;
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */
-#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */
-#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-/* SPIE fields */
-#define SPIE_MME 0x20
-#define SPIE_TXE 0x10
-#define SPIE_BSY 0x04
-#define SPIE_TXB 0x02
-#define SPIE_RXB 0x01
-
/*
* RISC Controller Configuration Register definitons
*/
__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
}
-/* Function code bits, usually generic to devices.
-*/
-#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
-#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
-#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
-#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
-#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
-
/* Parameter RAM offsets from the base.
*/
#define PROFF_SCC1 ((uint)0x8000)
uint iic_txtmp; /* Internal */
} iic_t;
-/* SPI parameter RAM.
-*/
-typedef struct spi {
- ushort spi_rbase; /* Rx Buffer descriptor base address */
- ushort spi_tbase; /* Tx Buffer descriptor base address */
- u_char spi_rfcr; /* Rx function code */
- u_char spi_tfcr; /* Tx function code */
- ushort spi_mrblr; /* Max receive buffer length */
- uint spi_rstate; /* Internal */
- uint spi_rdp; /* Internal */
- ushort spi_rbptr; /* Internal */
- ushort spi_rbc; /* Internal */
- uint spi_rxtmp; /* Internal */
- uint spi_tstate; /* Internal */
- uint spi_tdp; /* Internal */
- ushort spi_tbptr; /* Internal */
- ushort spi_tbc; /* Internal */
- uint spi_txtmp; /* Internal */
- uint spi_res; /* Tx temp. */
- uint spi_res1[4]; /* SDMA temp. */
-} spi_t;
-
-/* SPI Mode register.
-*/
-#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
-#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
-#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
-#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
-#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
-#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
-#define SPMODE_EN ((ushort)0x0100) /* Enable */
-#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
-#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
-
-#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
-#define SPMODE_PM(x) ((x) &0xF)
-
-#define SPI_EB ((u_char)0x10) /* big endian byte order */
-
/* IDMA parameter RAM
*/
typedef struct idma {
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
+ DO_KVM n; \
mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
.globl label##_pSeries; \
label##_pSeries: \
HMT_MEDIUM; \
+ DO_KVM n; \
mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \
mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \
std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \
#include <asm/page.h>
+pte_t *huge_pte_offset_and_shift(struct mm_struct *mm,
+ unsigned long addr, unsigned *shift);
+
+void flush_dcache_icache_hugepage(struct page *page);
int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
unsigned long len);
unsigned long end, unsigned long floor,
unsigned long ceiling);
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte);
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep);
-
/*
* The version of vma_mmu_pagesize() in arch/powerpc/mm/hugetlbpage.c needs
* to override the version in mm/hugetlb.c
{
}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
+ return __pte(old);
+}
+
static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
+ pte_t pte;
+ pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep);
+ flush_tlb_page(vma, addr);
}
static inline int huge_pte_none(pte_t pte)
#define H_QUERY_INT_STATE 0x1E4
#define H_POLL_PENDING 0x1D8
#define H_ILLAN_ATTRIBUTES 0x244
+#define H_MODIFY_HEA_QP 0x250
+#define H_QUERY_HEA_QP 0x254
+#define H_QUERY_HEA 0x258
+#define H_QUERY_HEA_PORT 0x25C
+#define H_MODIFY_HEA_PORT 0x260
+#define H_REG_BCMC 0x264
+#define H_DEREG_BCMC 0x268
+#define H_REGISTER_HEA_RPAGES 0x26C
+#define H_DISABLE_AND_GET_HEA 0x270
+#define H_GET_HEA_INFO 0x274
+#define H_ALLOC_HEA_RESOURCE 0x278
+#define H_ADD_CONN 0x284
+#define H_DEL_CONN 0x288
#define H_JOIN 0x298
#define H_VASI_STATE 0x2A4
#define H_ENABLE_CRQ 0x2B0
get_paca()->hard_enabled = 0; \
} while(0)
-static inline int irqs_disabled_flags(unsigned long flags)
-{
- return flags == 0;
-}
-
#else
#if defined(CONFIG_BOOKE)
/* USB Controller.
*/
-typedef struct usb_ctlr {
+typedef struct cpm_usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
} __attribute__ ((packed));
/* USB Controller */
-struct usb_ctlr {
+struct qe_usb_ctlr {
u8 usb_usmod;
u8 usb_usadr;
u8 usb_uscom;
} __attribute__ ((packed));
/* MCC */
-struct mcc {
+struct qe_mcc {
__be32 mcce; /* MCC event register */
__be32 mccm; /* MCC mask register */
__be32 mccf; /* MCC configuration register */
struct qe_mux qmx; /* QE Multiplexer */
struct qe_timers qet; /* QE Timers */
struct spi spi[0x2]; /* spi */
- struct mcc mcc; /* mcc */
+ struct qe_mcc mcc; /* mcc */
struct qe_brg brg; /* brg */
- struct usb_ctlr usb; /* USB */
+ struct qe_usb_ctlr usb; /* USB */
struct si1 si1; /* SI */
u8 res11[0x800];
struct sir sir; /* SI Routing Tables */
#include <asm/atomic.h>
-#define get_irq_desc(irq) (&irq_desc[(irq)])
-
/* Define a way to iterate across irqs. */
#define for_each_irq(i) \
for ((i) = 0; (i) < NR_IRQS; ++(i))
*/
#define NO_IRQ_IGNORE ((unsigned int)-1)
-/* Total number of virq in the platform (make it a CONFIG_* option ? */
-#define NR_IRQS 512
+/* Total number of virq in the platform */
+#define NR_IRQS CONFIG_NR_IRQS
/* Number of irqs reserved for the legacy controller */
#define NUM_ISA_INTERRUPTS 16
+/* Same thing, used by the generic IRQ code */
+#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS
+
/* This type is the placeholder for a hardware interrupt number. It has to
* be big enough to enclose whatever representation is used by a given
* platform.
KM_TYPE_NR
};
+/*
+ * This is a temporary build fix that (so they say on lkml....) should no longer
+ * be required after 2.6.33, because of changes planned to the kmap code.
+ * Let's try to remove this cruft then.
+ */
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define KM_NMI (-1)
+#define KM_NMI_PTE (-1)
+#define KM_IRQ_PTE (-1)
+#endif
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_KMAP_TYPES_H */
};
struct kvm_sregs {
+ __u32 pvr;
+ union {
+ struct {
+ __u64 sdr1;
+ struct {
+ struct {
+ __u64 slbe;
+ __u64 slbv;
+ } slb[64];
+ } ppc64;
+ struct {
+ __u32 sr[16];
+ __u64 ibat[8];
+ __u64 dbat[8];
+ } ppc32;
+ } s;
+ __u8 pad[1020];
+ } u;
};
struct kvm_fpu {
#define BOOKE_INTERRUPT_SPE_FP_ROUND 34
#define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35
+/* book3s */
+
+#define BOOK3S_INTERRUPT_SYSTEM_RESET 0x100
+#define BOOK3S_INTERRUPT_MACHINE_CHECK 0x200
+#define BOOK3S_INTERRUPT_DATA_STORAGE 0x300
+#define BOOK3S_INTERRUPT_DATA_SEGMENT 0x380
+#define BOOK3S_INTERRUPT_INST_STORAGE 0x400
+#define BOOK3S_INTERRUPT_INST_SEGMENT 0x480
+#define BOOK3S_INTERRUPT_EXTERNAL 0x500
+#define BOOK3S_INTERRUPT_ALIGNMENT 0x600
+#define BOOK3S_INTERRUPT_PROGRAM 0x700
+#define BOOK3S_INTERRUPT_FP_UNAVAIL 0x800
+#define BOOK3S_INTERRUPT_DECREMENTER 0x900
+#define BOOK3S_INTERRUPT_SYSCALL 0xc00
+#define BOOK3S_INTERRUPT_TRACE 0xd00
+#define BOOK3S_INTERRUPT_PERFMON 0xf00
+#define BOOK3S_INTERRUPT_ALTIVEC 0xf20
+#define BOOK3S_INTERRUPT_VSX 0xf40
+
+#define BOOK3S_IRQPRIO_SYSTEM_RESET 0
+#define BOOK3S_IRQPRIO_DATA_SEGMENT 1
+#define BOOK3S_IRQPRIO_INST_SEGMENT 2
+#define BOOK3S_IRQPRIO_DATA_STORAGE 3
+#define BOOK3S_IRQPRIO_INST_STORAGE 4
+#define BOOK3S_IRQPRIO_ALIGNMENT 5
+#define BOOK3S_IRQPRIO_PROGRAM 6
+#define BOOK3S_IRQPRIO_FP_UNAVAIL 7
+#define BOOK3S_IRQPRIO_ALTIVEC 8
+#define BOOK3S_IRQPRIO_VSX 9
+#define BOOK3S_IRQPRIO_SYSCALL 10
+#define BOOK3S_IRQPRIO_MACHINE_CHECK 11
+#define BOOK3S_IRQPRIO_DEBUG 12
+#define BOOK3S_IRQPRIO_EXTERNAL 13
+#define BOOK3S_IRQPRIO_DECREMENTER 14
+#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR 15
+#define BOOK3S_IRQPRIO_MAX 16
+
+#define BOOK3S_HFLAG_DCBZ32 0x1
+#define BOOK3S_HFLAG_SLB 0x2
+
#define RESUME_FLAG_NV (1<<0) /* Reload guest nonvolatile state? */
#define RESUME_FLAG_HOST (1<<1) /* Resume host? */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_H__
+#define __ASM_KVM_BOOK3S_H__
+
+#include <linux/types.h>
+#include <linux/kvm_host.h>
+#include <asm/kvm_ppc.h>
+
+struct kvmppc_slb {
+ u64 esid;
+ u64 vsid;
+ u64 orige;
+ u64 origv;
+ bool valid;
+ bool Ks;
+ bool Kp;
+ bool nx;
+ bool large;
+ bool class;
+};
+
+struct kvmppc_sr {
+ u32 raw;
+ u32 vsid;
+ bool Ks;
+ bool Kp;
+ bool nx;
+};
+
+struct kvmppc_bat {
+ u64 raw;
+ u32 bepi;
+ u32 bepi_mask;
+ bool vs;
+ bool vp;
+ u32 brpn;
+ u8 wimg;
+ u8 pp;
+};
+
+struct kvmppc_sid_map {
+ u64 guest_vsid;
+ u64 guest_esid;
+ u64 host_vsid;
+ bool valid;
+};
+
+#define SID_MAP_BITS 9
+#define SID_MAP_NUM (1 << SID_MAP_BITS)
+#define SID_MAP_MASK (SID_MAP_NUM - 1)
+
+struct kvmppc_vcpu_book3s {
+ struct kvm_vcpu vcpu;
+ struct kvmppc_sid_map sid_map[SID_MAP_NUM];
+ struct kvmppc_slb slb[64];
+ struct {
+ u64 esid;
+ u64 vsid;
+ } slb_shadow[64];
+ u8 slb_shadow_max;
+ struct kvmppc_sr sr[16];
+ struct kvmppc_bat ibat[8];
+ struct kvmppc_bat dbat[8];
+ u64 hid[6];
+ int slb_nr;
+ u64 sdr1;
+ u64 dsisr;
+ u64 hior;
+ u64 msr_mask;
+ u64 vsid_first;
+ u64 vsid_next;
+ u64 vsid_max;
+ int context_id;
+};
+
+#define CONTEXT_HOST 0
+#define CONTEXT_GUEST 1
+#define CONTEXT_GUEST_END 2
+
+#define VSID_REAL 0xfffffffffff00000
+#define VSID_REAL_DR 0xffffffffffe00000
+#define VSID_REAL_IR 0xffffffffffd00000
+#define VSID_BAT 0xffffffffffc00000
+#define VSID_PR 0x8000000000000000
+
+extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask);
+extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask);
+extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end);
+extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr);
+extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu);
+extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu);
+extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte);
+extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr);
+extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu);
+extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data);
+extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, bool data);
+extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr);
+extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec);
+extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat,
+ bool upper, u32 val);
+
+extern u32 kvmppc_trampoline_lowmem;
+extern u32 kvmppc_trampoline_enter;
+
+static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu)
+{
+ return container_of(vcpu, struct kvmppc_vcpu_book3s, vcpu);
+}
+
+static inline ulong dsisr(void)
+{
+ ulong r;
+ asm ( "mfdsisr %0 " : "=r" (r) );
+ return r;
+}
+
+extern void kvm_return_point(void);
+
+#define INS_DCBZ 0x7c0007ec
+
+#endif /* __ASM_KVM_BOOK3S_H__ */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#ifndef __ASM_KVM_BOOK3S_ASM_H__
+#define __ASM_KVM_BOOK3S_ASM_H__
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+
+#include <asm/kvm_asm.h>
+
+.macro DO_KVM intno
+ .if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \
+ (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \
+ (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \
+ (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \
+ (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \
+ (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \
+ (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \
+ (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \
+ (\intno == BOOK3S_INTERRUPT_PROGRAM) || \
+ (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \
+ (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \
+ (\intno == BOOK3S_INTERRUPT_SYSCALL) || \
+ (\intno == BOOK3S_INTERRUPT_TRACE) || \
+ (\intno == BOOK3S_INTERRUPT_PERFMON) || \
+ (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \
+ (\intno == BOOK3S_INTERRUPT_VSX)
+
+ b kvmppc_trampoline_\intno
+kvmppc_resume_\intno:
+
+ .endif
+.endm
+
+#else
+
+.macro DO_KVM intno
+.endm
+
+#endif /* CONFIG_KVM_BOOK3S_64_HANDLER */
+
+#endif /* __ASM_KVM_BOOK3S_ASM_H__ */
#define __POWERPC_KVM_HOST_H__
#include <linux/mutex.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/kvm_types.h>
#include <asm/kvm_asm.h>
#define KVM_NR_PAGE_SIZES 1
#define KVM_PAGES_PER_HPAGE(x) (1UL<<31)
+#define HPTEG_CACHE_NUM 1024
+
struct kvm;
struct kvm_run;
struct kvm_vcpu;
u32 dec_exits;
u32 ext_intr_exits;
u32 halt_wakeup;
+#ifdef CONFIG_PPC64
+ u32 pf_storage;
+ u32 pf_instruc;
+ u32 sp_storage;
+ u32 sp_instruc;
+ u32 queue_intr;
+ u32 ld;
+ u32 ld_slow;
+ u32 st;
+ u32 st_slow;
+#endif
};
enum kvm_exit_types {
struct kvm_arch {
};
+struct kvmppc_pte {
+ u64 eaddr;
+ u64 vpage;
+ u64 raddr;
+ bool may_read;
+ bool may_write;
+ bool may_execute;
+};
+
+struct kvmppc_mmu {
+ /* book3s_64 only */
+ void (*slbmte)(struct kvm_vcpu *vcpu, u64 rb, u64 rs);
+ u64 (*slbmfee)(struct kvm_vcpu *vcpu, u64 slb_nr);
+ u64 (*slbmfev)(struct kvm_vcpu *vcpu, u64 slb_nr);
+ void (*slbie)(struct kvm_vcpu *vcpu, u64 slb_nr);
+ void (*slbia)(struct kvm_vcpu *vcpu);
+ /* book3s */
+ void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value);
+ u32 (*mfsrin)(struct kvm_vcpu *vcpu, u32 srnum);
+ int (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, struct kvmppc_pte *pte, bool data);
+ void (*reset_msr)(struct kvm_vcpu *vcpu);
+ void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large);
+ int (*esid_to_vsid)(struct kvm_vcpu *vcpu, u64 esid, u64 *vsid);
+ u64 (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data);
+ bool (*is_dcbz32)(struct kvm_vcpu *vcpu);
+};
+
+struct hpte_cache {
+ u64 host_va;
+ u64 pfn;
+ ulong slot;
+ struct kvmppc_pte pte;
+};
+
struct kvm_vcpu_arch {
- u32 host_stack;
+ ulong host_stack;
u32 host_pid;
+#ifdef CONFIG_PPC64
+ ulong host_msr;
+ ulong host_r2;
+ void *host_retip;
+ ulong trampoline_lowmem;
+ ulong trampoline_enter;
+ ulong highmem_handler;
+ ulong host_paca_phys;
+ struct kvmppc_mmu mmu;
+#endif
u64 fpr[32];
ulong gpr[32];
ulong xer;
ulong msr;
+#ifdef CONFIG_PPC64
+ ulong shadow_msr;
+ ulong hflags;
+#endif
u32 mmucr;
ulong sprg0;
ulong sprg1;
u32 ivor[64];
ulong ivpr;
u32 pir;
+ u32 pvr;
u32 shadow_pid;
u32 pid;
#endif
u32 last_inst;
+#ifdef CONFIG_PPC64
+ ulong fault_dsisr;
+#endif
ulong fault_dear;
ulong fault_esr;
gpa_t paddr_accessed;
u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
- struct timer_list dec_timer;
+ struct hrtimer dec_timer;
+ struct tasklet_struct tasklet;
+ u64 dec_jiffies;
unsigned long pending_exceptions;
+
+#ifdef CONFIG_PPC64
+ struct hpte_cache hpte_cache[HPTEG_CACHE_NUM];
+ int hpte_cache_offset;
+#endif
};
#endif /* __POWERPC_KVM_HOST_H__ */
extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
extern char kvmppc_handlers_start[];
extern unsigned long kvmppc_handler_len;
+extern void kvmppc_handler_highmem(void);
extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
// Used to pass parms from the OS to PLIC for SetAsrAndRfid
u64 saved_gpr3; // Saved GPR3 x20-x27
u64 saved_gpr4; // Saved GPR4 x28-x2F
- u64 saved_gpr5; // Saved GPR5 x30-x37
+ union {
+ u64 saved_gpr5; /* Saved GPR5 x30-x37 */
+ struct {
+ u8 cede_latency_hint; /* x30 */
+ u8 reserved[7]; /* x31-x36 */
+ } fields;
+ } gpr5_dword;
+
u8 dtl_enable_mask; // Dispatch Trace Log mask x38-x38
u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39
void (*suspend_disable_irqs)(void);
void (*suspend_enable_irqs)(void);
#endif
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+ ssize_t (*cpu_probe)(const char *, size_t);
+ ssize_t (*cpu_release)(const char *, size_t);
+#endif
};
extern void e500_idle(void);
struct macio_bus *bus; /* macio bus this device is on */
struct macio_dev *media_bay; /* Device is part of a media bay */
struct of_device ofdev;
+ struct device_dma_parameters dma_parms; /* ide needs that */
int n_resources;
struct resource resource[MACIO_DEV_COUNT_RESOURCES];
int n_interrupts;
return res->end - res->start + 1;
}
+extern int macio_enable_devres(struct macio_dev *dev);
+
extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
extern void macio_release_resource(struct macio_dev *dev, int resource_no);
extern int macio_request_resources(struct macio_dev *dev, const char *name);
int (*resume)(struct macio_dev* dev);
int (*shutdown)(struct macio_dev* dev);
+#ifdef CONFIG_PMAC_MEDIABAY
+ void (*mediabay_event)(struct macio_dev* dev, int mb_state);
+#endif
struct device_driver driver;
};
#define to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
#define MB_POWER 6 /* media bay contains a Power device (???) */
#define MB_NO 7 /* media bay contains nothing */
-/* Number of bays in the machine or 0 */
-extern int media_bay_count;
+struct macio_dev;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-#include <linux/ide.h>
+#ifdef CONFIG_PMAC_MEDIABAY
-int check_media_bay_by_base(unsigned long base, int what);
-/* called by IDE PMAC host driver to register IDE controller for media bay */
-int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif);
+/* Check the content type of the bay, returns MB_NO if the bay is still
+ * transitionning
+ */
+extern int check_media_bay(struct macio_dev *bay);
-int check_media_bay(struct device_node *which_bay, int what);
+/* The ATA driver uses the calls below to temporarily hold on the
+ * media bay callbacks while initializing the interface
+ */
+extern void lock_media_bay(struct macio_dev *bay);
+extern void unlock_media_bay(struct macio_dev *bay);
#else
-static inline int check_media_bay(struct device_node *which_bay, int what)
+static inline int check_media_bay(struct macio_dev *bay)
{
- return -ENODEV;
+ return MB_NO;
}
+static inline void lock_media_bay(struct macio_dev *bay) { }
+static inline void unlock_media_bay(struct macio_dev *bay) { }
+
#endif
#endif /* __KERNEL__ */
*/
extern int mmu_ci_restrictions;
-#ifdef CONFIG_HUGETLB_PAGE
-/*
- * The page size indexes of the huge pages for use by hugetlbfs
- */
-extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
-
-#endif /* CONFIG_HUGETLB_PAGE */
-
/*
* This function sets the AVPN and L fields of the HPTE appropriately
* for the page size
unsigned long vsid, pte_t *ptep, unsigned long trap,
unsigned int local, int ssize);
struct mm_struct;
+unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap);
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
-extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
- unsigned long ea, unsigned long vsid, int local,
- unsigned long trap);
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+ pte_t *ptep, unsigned long trap, int local, int ssize,
+ unsigned int shift, unsigned int mmu_psize);
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+/*
+ * For the sub-page protection option, we extend the PGD with one of
+ * these. Basically we have a 3-level tree, with the top level being
+ * the protptrs array. To optimize speed and memory consumption when
+ * only addresses < 4GB are being protected, pointers to the first
+ * four pages of sub-page protection words are stored in the low_prot
+ * array.
+ * Each page of sub-page protection words protects 1GB (4 bytes
+ * protects 64k). For the 3-level tree, each page of pointers then
+ * protects 8TB.
+ */
+struct subpage_prot_table {
+ unsigned long maxaddr; /* only addresses < this are protected */
+ unsigned int **protptrs[2];
+ unsigned int *low_prot[4];
+};
+
+#define SBP_L1_BITS (PAGE_SHIFT - 2)
+#define SBP_L2_BITS (PAGE_SHIFT - 3)
+#define SBP_L1_COUNT (1 << SBP_L1_BITS)
+#define SBP_L2_COUNT (1 << SBP_L2_BITS)
+#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS)
+#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS)
+
+extern void subpage_prot_free(struct mm_struct *mm);
+extern void subpage_prot_init_new_context(struct mm_struct *mm);
+#else
+static inline void subpage_prot_free(struct mm_struct *mm) {}
+static inline void subpage_prot_init_new_context(struct mm_struct *mm) { }
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
+
typedef unsigned long mm_context_id_t;
typedef struct {
u16 sllp; /* SLB page size encoding */
#endif
unsigned long vdso_base;
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+ struct subpage_prot_table spt;
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
} mm_context_t;
extern void set_context(unsigned long id, pgd_t *pgd);
#ifdef CONFIG_PPC_BOOK3S_64
+extern int __init_new_context(void);
+extern void __destroy_context(int context_id);
static inline void mmu_context_init(void) { }
#else
extern void mmu_context_init(void);
extern int nvram_read_error_log(char * buff, int length,
unsigned int * err_type, unsigned int *err_seq);
extern int nvram_clear_error_log(void);
-extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
extern int pSeries_nvram_init(void);
#ifdef CONFIG_PPC_PSERIES
extern int pSeries_reconfig_notifier_register(struct notifier_block *);
extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+extern struct blocking_notifier_head pSeries_reconfig_chain;
#else /* !CONFIG_PPC_PSERIES */
static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
u64 system_time; /* accumulated system TB ticks */
u64 startpurr; /* PURR/TB value snapshot */
u64 startspurr; /* SPURR value snapshot */
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ struct {
+ u64 esid;
+ u64 vsid;
+ } kvm_slb[64]; /* guest SLB */
+ u8 kvm_slb_max; /* highest used guest slb entry */
+ u8 kvm_in_guest; /* are we inside the guest? */
+#endif
};
extern struct paca_struct paca[];
#endif
+typedef struct { signed long pd; } hugepd_t;
+#define HUGEPD_SHIFT_MASK 0x3f
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline int hugepd_ok(hugepd_t hpd)
+{
+ return (hpd.pd > 0);
+}
+
+#define is_hugepd(pdep) (hugepd_ok(*((hugepd_t *)(pdep))))
+#else /* CONFIG_HUGETLB_PAGE */
+#define is_hugepd(pdep) 0
+#endif /* CONFIG_HUGETLB_PAGE */
+
struct page;
extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr,
#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
#define HPAGE_MASK (~(HPAGE_SIZE - 1))
#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
-#define HUGE_MAX_HSTATE 3
+#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1)
#endif /* __ASSEMBLY__ */
#include <linux/threads.h>
-#define PTE_NONCACHE_NUM 0 /* dummy for now to share code w/ppc64 */
+/* For 32-bit, all levels of page tables are just drawn from get_free_page() */
+#define MAX_PGTABLE_INDEX_SIZE 0
extern void __bad_pte(pmd_t *pmd);
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-static inline void pgtable_free(pgtable_free_t pgf)
+static inline void pgtable_free(void *table, unsigned index_size)
{
- void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
-
- free_page((unsigned long)p);
+ BUG_ON(index_size); /* 32-bit doesn't use this */
+ free_page((unsigned long)table);
}
#define check_pgt_cache() do { } while (0)
#include <linux/cpumask.h>
#include <linux/percpu.h>
-#ifndef CONFIG_PPC_SUBPAGE_PROT
-static inline void subpage_prot_free(pgd_t *pgd) {}
-#endif
+/*
+ * Functions that deal with pagetables that could be at any level of
+ * the table need to be passed an "index_size" so they know how to
+ * handle allocation. For PTE pages (which are linked to a struct
+ * page for now, and drawn from the main get_free_pages() pool), the
+ * allocation size will be (2^index_size * sizeof(pointer)) and
+ * allocations are drawn from the kmem_cache in PGT_CACHE(index_size).
+ *
+ * The maximum index size needs to be big enough to allow any
+ * pagetable sizes we need, but small enough to fit in the low bits of
+ * any page table pointer. In other words all pagetables, even tiny
+ * ones, must be aligned to allow at least enough low 0 bits to
+ * contain this value. This value is also used as a mask, so it must
+ * be one less than a power of two.
+ */
+#define MAX_PGTABLE_INDEX_SIZE 0xf
extern struct kmem_cache *pgtable_cache[];
-
-#define PGD_CACHE_NUM 0
-#define PUD_CACHE_NUM 1
-#define PMD_CACHE_NUM 1
-#define HUGEPTE_CACHE_NUM 2
-#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */
+#define PGT_CACHE(shift) (pgtable_cache[(shift)-1])
static inline pgd_t *pgd_alloc(struct mm_struct *mm)
{
- return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+ return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), GFP_KERNEL);
}
static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
- subpage_prot_free(pgd);
- kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+ kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd);
}
#ifndef CONFIG_PPC_64K_PAGES
static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+ return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE),
GFP_KERNEL|__GFP_REPEAT);
}
static inline void pud_free(struct mm_struct *mm, pud_t *pud)
{
- kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+ kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud);
}
static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+ return kmem_cache_alloc(PGT_CACHE(PMD_INDEX_SIZE),
GFP_KERNEL|__GFP_REPEAT);
}
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
{
- kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+ kmem_cache_free(PGT_CACHE(PMD_INDEX_SIZE), pmd);
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
return page;
}
-static inline void pgtable_free(pgtable_free_t pgf)
+static inline void pgtable_free(void *table, unsigned index_size)
{
- void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
- int cachenum = pgf.val & PGF_CACHENUM_MASK;
-
- if (cachenum == PTE_NONCACHE_NUM)
- free_page((unsigned long)p);
- else
- kmem_cache_free(pgtable_cache[cachenum], p);
+ if (!index_size)
+ free_page((unsigned long)table);
+ else {
+ BUG_ON(index_size > MAX_PGTABLE_INDEX_SIZE);
+ kmem_cache_free(PGT_CACHE(index_size), table);
+ }
}
-#define __pmd_free_tlb(tlb, pmd,addr) \
- pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
- PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#define __pmd_free_tlb(tlb, pmd, addr) \
+ pgtable_free_tlb(tlb, pmd, PMD_INDEX_SIZE)
#ifndef CONFIG_PPC_64K_PAGES
#define __pud_free_tlb(tlb, pud, addr) \
- pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
- PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+ pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE)
+
#endif /* CONFIG_PPC_64K_PAGES */
#define check_pgt_cache() do { } while (0)
__free_page(ptepage);
}
-typedef struct pgtable_free {
- unsigned long val;
-} pgtable_free_t;
-
-/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
- * and small enough to fit in the low bits of any naturally aligned page
- * table cache entry. Arbitrarily set to 0x1f, that should give us some
- * room to grow
- */
-#define PGF_CACHENUM_MASK 0x1f
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
- unsigned long mask)
-{
- BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
- return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
#ifdef CONFIG_PPC64
#include <asm/pgalloc-64.h>
#else
#endif
#ifdef CONFIG_SMP
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift);
extern void pte_free_finish(void);
#else /* CONFIG_SMP */
-static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
{
- pgtable_free(pgf);
+ pgtable_free(table, shift);
}
static inline void pte_free_finish(void) { }
#endif /* !CONFIG_SMP */
static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage,
unsigned long address)
{
- pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage),
- PTE_NONCACHE_NUM,
- PTE_TABLE_SIZE-1);
tlb_flush_pgtable(tlb, address);
pgtable_page_dtor(ptepage);
- pgtable_free_tlb(tlb, pgf);
+ pgtable_free_tlb(tlb, page_address(ptepage), 0);
}
#endif /* __KERNEL__ */
#define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
#define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT)
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
void pgtable_cache_init(void);
/*
return pt;
}
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+#ifdef CONFIG_HUGETLB_PAGE
+pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
+ unsigned *shift);
+#else
+static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea,
+ unsigned *shift)
+{
+ if (shift)
+ *shift = 0;
+ return find_linux_pte(pgdir, ea);
+}
+#endif /* !CONFIG_HUGETLB_PAGE */
#endif /* __ASSEMBLY__ */
*/
extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \
__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
-
-#ifdef CONFIG_PPC_SUBPAGE_PROT
-/*
- * For the sub-page protection option, we extend the PGD with one of
- * these. Basically we have a 3-level tree, with the top level being
- * the protptrs array. To optimize speed and memory consumption when
- * only addresses < 4GB are being protected, pointers to the first
- * four pages of sub-page protection words are stored in the low_prot
- * array.
- * Each page of sub-page protection words protects 1GB (4 bytes
- * protects 64k). For the 3-level tree, each page of pointers then
- * protects 8TB.
- */
-struct subpage_prot_table {
- unsigned long maxaddr; /* only addresses < this are protected */
- unsigned int **protptrs[2];
- unsigned int *low_prot[4];
-};
-
-#undef PGD_TABLE_SIZE
-#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
- sizeof(struct subpage_prot_table))
-
-#define SBP_L1_BITS (PAGE_SHIFT - 2)
-#define SBP_L2_BITS (PAGE_SHIFT - 3)
-#define SBP_L1_COUNT (1 << SBP_L1_BITS)
-#define SBP_L2_COUNT (1 << SBP_L2_BITS)
-#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS)
-#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS)
-
-extern void subpage_prot_free(pgd_t *pgd);
-
-static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
-{
- return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
-}
-#endif /* CONFIG_PPC_SUBPAGE_PROT */
#endif /* __ASSEMBLY__ */
/* Export QE common operations */
#ifdef CONFIG_QUICC_ENGINE
-extern void __init qe_reset(void);
+extern void qe_reset(void);
#else
static inline void qe_reset(void) {}
#endif
static inline void qe_pin_set_dedicated(struct qe_pin *pin) {}
#endif /* CONFIG_QE_GPIO */
-/* QE internal API */
+#ifdef CONFIG_QUICC_ENGINE
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+#else
+static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
+ u32 cmd_input)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
+
+/* QE internal API */
enum qe_clock qe_clock_source(const char *source);
unsigned int qe_get_brg_clk(void);
int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
void qe_put_snum(u8 snum);
unsigned int qe_get_num_of_risc(void);
unsigned int qe_get_num_of_snums(void);
-int qe_alive_during_sleep(void);
+
+static inline int qe_alive_during_sleep(void)
+{
+ /*
+ * MPC8568E reference manual says:
+ *
+ * "...power down sequence waits for all I/O interfaces to become idle.
+ * In some applications this may happen eventually without actively
+ * shutting down interfaces, but most likely, software will have to
+ * take steps to shut down the eTSEC, QUICC Engine Block, and PCI
+ * interfaces before issuing the command (either the write to the core
+ * MSR[WE] as described above or writing to POWMGTCSR) to put the
+ * device into sleep state."
+ *
+ * MPC8569E reference manual has a similar paragraph.
+ */
+#ifdef CONFIG_PPC_85xx
+ return 0;
+#else
+ return 1;
+#endif
+}
/* we actually use cpm_muram implementation, define this for convenience */
#define qe_muram_init cpm_muram_init
u64 extended_modes; /* Extended modes */
};
+#ifdef CONFIG_QUICC_ENGINE
/* Upload a firmware to the QE */
int qe_upload_firmware(const struct qe_firmware *firmware);
+#else
+static inline int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_QUICC_ENGINE */
/* Obtain information on the uploaded firmware */
struct qe_firmware_info *qe_get_firmware_info(void);
SYSCALL_SPU(setfsgid)
SYSCALL_SPU(llseek)
COMPAT_SYS_SPU(getdents)
-SYSX_SPU(sys_select,ppc32_select,ppc_select)
+SYSX_SPU(sys_select,ppc32_select,sys_select)
SYSCALL_SPU(flock)
SYSCALL_SPU(msync)
COMPAT_SYS_SPU(readv)
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK) += clock.o
-procfs-$(CONFIG_PPC64) := proc_ppc64.o
+procfs-y := proc_powerpc.o
obj-$(CONFIG_PROC_FS) += $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
+obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
obj-$(CONFIG_LPARCFG) += lparcfg.o
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ DEFINE(PACA_KVM_IN_GUEST, offsetof(struct paca_struct, kvm_in_guest));
+ DEFINE(PACA_KVM_SLB, offsetof(struct paca_struct, kvm_slb));
+ DEFINE(PACA_KVM_SLB_MAX, offsetof(struct paca_struct, kvm_slb_max));
+#endif
#endif /* CONFIG_PPC64 */
/* RTAS */
DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst));
DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
+
+ /* book3s_64 */
+#ifdef CONFIG_PPC64
+ DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr));
+ DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip));
+ DEFINE(VCPU_HOST_R2, offsetof(struct kvm_vcpu, arch.host_r2));
+ DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr));
+ DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr));
+ DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem));
+ DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter));
+ DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler));
+ DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags));
+#endif
#endif
#ifdef CONFIG_44x
DEFINE(PGD_T_LOG2, PGD_T_LOG2);
DEFINE(PTE_T_LOG2, PTE_T_LOG2);
#endif
-#ifdef CONFIG_FSL_BOOKE
- DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
-#endif
#ifdef CONFIG_KVM_EXIT_TIMING
DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu,
hard_irq_disable();
for_each_irq(i) {
- struct irq_desc *desc = irq_desc + i;
+ struct irq_desc *desc = irq_to_desc(i);
if (desc->status & IRQ_INPROGRESS)
desc->chip->eoi(i);
#include <asm/dma.h>
#include <asm/abs_addr.h>
-int swiotlb __read_mostly;
unsigned int ppc_swiotlb_enable;
/*
. = 0x200
_machine_check_pSeries:
HMT_MEDIUM
+ DO_KVM 0x200
mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */
EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
.globl data_access_pSeries
data_access_pSeries:
HMT_MEDIUM
+ DO_KVM 0x300
mtspr SPRN_SPRG_SCRATCH0,r13
BEGIN_FTR_SECTION
mfspr r13,SPRN_SPRG_PACA
.globl data_access_slb_pSeries
data_access_slb_pSeries:
HMT_MEDIUM
+ DO_KVM 0x380
mtspr SPRN_SPRG_SCRATCH0,r13
mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
.globl instruction_access_slb_pSeries
instruction_access_slb_pSeries:
HMT_MEDIUM
+ DO_KVM 0x480
mtspr SPRN_SPRG_SCRATCH0,r13
mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */
std r3,PACA_EXSLB+EX_R3(r13)
.globl system_call_pSeries
system_call_pSeries:
HMT_MEDIUM
+ DO_KVM 0xc00
BEGIN_FTR_SECTION
cmpdi r0,0x1ebe
beq- 1f
* trickery is thus necessary
*/
. = 0xf00
+ DO_KVM 0xf00
b performance_monitor_pSeries
. = 0xf20
+ DO_KVM 0xf20
b altivec_unavailable_pSeries
. = 0xf40
+ DO_KVM 0xf40
b vsx_unavailable_pSeries
#ifdef CONFIG_CBE_RAS
#include <asm/firmware.h>
#include <asm/page_64.h>
#include <asm/irqflags.h>
+#include <asm/kvm_book3s_64_asm.h>
/* The physical memory is layed out such that the secondary processor
* spin code sits at 0x0000...0x00ff. On server, the vectors follow
#include "exceptions-64s.S"
#endif
+/* KVM trampoline code needs to be close to the interrupt handlers */
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+#include "../kvm/book3s_64_rmhandlers.S"
+#endif
+
_GLOBAL(generic_secondary_thread_init)
mr r24,r3
sync
blr
-/*
- * extern void loadcam_entry(unsigned int index)
- *
- * Load TLBCAM[index] entry in to the L2 CAM MMU
- */
-_GLOBAL(loadcam_entry)
- lis r4,TLBCAM@ha
- addi r4,r4,TLBCAM@l
- mulli r5,r3,TLBCAM_SIZE
- add r3,r5,r4
- lwz r4,0(r3)
- mtspr SPRN_MAS0,r4
- lwz r4,4(r3)
- mtspr SPRN_MAS1,r4
- lwz r4,8(r3)
- mtspr SPRN_MAS2,r4
- lwz r4,12(r3)
- mtspr SPRN_MAS3,r4
- tlbwe
- isync
- blr
-
/*
* extern void giveup_altivec(struct task_struct *prev)
*
#endif /* CONFIG_PPC32 */
#ifdef CONFIG_PPC64
+
+#ifndef CONFIG_SPARSE_IRQ
EXPORT_SYMBOL(irq_desc);
+#endif
int distribute_irqs = 1;
for_each_online_cpu(j)
seq_printf(p, "CPU%d ", j);
seq_putc(p, '\n');
- }
-
- if (i < NR_IRQS) {
- desc = get_irq_desc(i);
- spin_lock_irqsave(&desc->lock, flags);
- action = desc->action;
- if (!action || !action->handler)
- goto skip;
- seq_printf(p, "%3d: ", i);
-#ifdef CONFIG_SMP
- for_each_online_cpu(j)
- seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
-#else
- seq_printf(p, "%10u ", kstat_irqs(i));
-#endif /* CONFIG_SMP */
- if (desc->chip)
- seq_printf(p, " %s ", desc->chip->typename);
- else
- seq_puts(p, " None ");
- seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge ");
- seq_printf(p, " %s", action->name);
- for (action = action->next; action; action = action->next)
- seq_printf(p, ", %s", action->name);
- seq_putc(p, '\n');
-skip:
- spin_unlock_irqrestore(&desc->lock, flags);
- } else if (i == NR_IRQS) {
+ } else if (i == nr_irqs) {
#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
if (tau_initialized){
seq_puts(p, "TAU: ");
}
#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
+
+ return 0;
}
+
+ desc = irq_to_desc(i);
+ if (!desc)
+ return 0;
+
+ spin_lock_irqsave(&desc->lock, flags);
+
+ action = desc->action;
+ if (!action || !action->handler)
+ goto skip;
+
+ seq_printf(p, "%3d: ", i);
+#ifdef CONFIG_SMP
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+#else
+ seq_printf(p, "%10u ", kstat_irqs(i));
+#endif /* CONFIG_SMP */
+
+ if (desc->chip)
+ seq_printf(p, " %s ", desc->chip->name);
+ else
+ seq_puts(p, " None ");
+
+ seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge ");
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+ seq_putc(p, '\n');
+
+skip:
+ spin_unlock_irqrestore(&desc->lock, flags);
+
return 0;
}
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(cpumask_t map)
{
+ struct irq_desc *desc;
unsigned int irq;
static int warned;
for_each_irq(irq) {
cpumask_t mask;
- if (irq_desc[irq].status & IRQ_PER_CPU)
+ desc = irq_to_desc(irq);
+ if (desc && desc->status & IRQ_PER_CPU)
continue;
- cpumask_and(&mask, irq_desc[irq].affinity, &map);
+ cpumask_and(&mask, desc->affinity, &map);
if (any_online_cpu(mask) == NR_CPUS) {
printk("Breaking affinity for irq %i\n", irq);
mask = map;
}
- if (irq_desc[irq].chip->set_affinity)
- irq_desc[irq].chip->set_affinity(irq, &mask);
- else if (irq_desc[irq].action && !(warned++))
+ if (desc->chip->set_affinity)
+ desc->chip->set_affinity(irq, &mask);
+ else if (desc->action && !(warned++))
printk("Cannot set affinity for irq %i\n", irq);
}
return;
}
- desc = irq_desc + irq;
+ desc = irq_to_desc(irq);
saved_sp_limit = current->thread.ksp_limit;
irqtp->task = curtp->task;
smp_wmb();
/* Clear norequest flags */
- get_irq_desc(i)->status &= ~IRQ_NOREQUEST;
+ irq_to_desc(i)->status &= ~IRQ_NOREQUEST;
/* Legacy flags are left to default at this point,
* one can then use irq_create_mapping() to
static int irq_setup_virq(struct irq_host *host, unsigned int virq,
irq_hw_number_t hwirq)
{
+ struct irq_desc *desc;
+
+ desc = irq_to_desc_alloc_node(virq, 0);
+ if (!desc) {
+ pr_debug("irq: -> allocating desc failed\n");
+ goto error;
+ }
+
/* Clear IRQ_NOREQUEST flag */
- get_irq_desc(virq)->status &= ~IRQ_NOREQUEST;
+ desc->status &= ~IRQ_NOREQUEST;
/* map it */
smp_wmb();
if (host->ops->map(host, virq, hwirq)) {
pr_debug("irq: -> mapping failed, freeing\n");
- irq_free_virt(virq, 1);
- return -1;
+ goto error;
}
return 0;
+
+error:
+ irq_free_virt(virq, 1);
+ return -1;
}
unsigned int irq_create_direct_mapping(struct irq_host *host)
/* Set type if specified and different than the current one */
if (type != IRQ_TYPE_NONE &&
- type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK))
+ type != (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK))
set_irq_type(virq, type);
return virq;
}
irq_map[virq].hwirq = host->inval_irq;
/* Set some flags */
- get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+ irq_to_desc(virq)->status |= IRQ_NOREQUEST;
/* Free it */
irq_free_virt(virq, 1);
spin_unlock_irqrestore(&irq_big_lock, flags);
}
-void irq_early_init(void)
+int arch_early_irq_init(void)
{
- unsigned int i;
+ struct irq_desc *desc;
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ desc = irq_to_desc(i);
+ if (desc)
+ desc->status |= IRQ_NOREQUEST;
+ }
- for (i = 0; i < NR_IRQS; i++)
- get_irq_desc(i)->status |= IRQ_NOREQUEST;
+ return 0;
+}
+
+int arch_init_chip_data(struct irq_desc *desc, int node)
+{
+ desc->status |= IRQ_NOREQUEST;
+ return 0;
}
/* We need to create the radix trees late */
seq_printf(m, "%-5s %-7s %-15s %s\n", "virq", "hwirq",
"chip name", "host name");
- for (i = 1; i < NR_IRQS; i++) {
- desc = get_irq_desc(i);
+ for (i = 1; i < nr_irqs; i++) {
+ desc = irq_to_desc(i);
+ if (!desc)
+ continue;
+
spin_lock_irqsave(&desc->lock, flags);
if (desc->action && desc->action->handler) {
seq_printf(m, "%5d ", i);
seq_printf(m, "0x%05lx ", virq_to_hw(i));
- if (desc->chip && desc->chip->typename)
- p = desc->chip->typename;
+ if (desc->chip && desc->chip->name)
+ p = desc->chip->name;
else
p = none;
seq_printf(m, "%-15s ", p);
!firmware_has_feature(FW_FEATURE_ISERIES))
mode |= S_IWUSR;
- ent = proc_create("ppc64/lparcfg", mode, NULL, &lparcfg_fops);
+ ent = proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops);
if (!ent) {
- printk(KERN_ERR "Failed to create ppc64/lparcfg\n");
+ printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
return -EIO;
}
}
-static int dev_nvram_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long dev_nvram_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
{
switch(cmd) {
#ifdef CONFIG_PPC_PMAC
}
const struct file_operations nvram_fops = {
- .owner = THIS_MODULE,
- .llseek = dev_nvram_llseek,
- .read = dev_nvram_read,
- .write = dev_nvram_write,
- .ioctl = dev_nvram_ioctl,
+ .owner = THIS_MODULE,
+ .llseek = dev_nvram_llseek,
+ .read = dev_nvram_read,
+ .write = dev_nvram_write,
+ .unlocked_ioctl = dev_nvram_ioctl,
};
static struct miscdevice nvram_dev = {
#ifdef DEBUG_NVRAM
-static void nvram_print_partitions(char * label)
+static void __init nvram_print_partitions(char * label)
{
struct list_head * p;
struct nvram_partition * tmp_part;
#endif
-static int nvram_write_header(struct nvram_partition * part)
+static int __init nvram_write_header(struct nvram_partition * part)
{
loff_t tmp_index;
int rc;
}
-static unsigned char nvram_checksum(struct nvram_header *p)
+static unsigned char __init nvram_checksum(struct nvram_header *p)
{
unsigned int c_sum, c_sum2;
unsigned short *sp = (unsigned short *)p->name; /* assume 6 shorts */
return c_sum;
}
-
-/*
- * Find an nvram partition, sig can be 0 for any
- * partition or name can be NULL for any name, else
- * tries to match both
- */
-struct nvram_partition *nvram_find_partition(int sig, const char *name)
-{
- struct nvram_partition * part;
- struct list_head * p;
-
- list_for_each(p, &nvram_part->partition) {
- part = list_entry(p, struct nvram_partition, partition);
-
- if (sig && part->header.signature != sig)
- continue;
- if (name && 0 != strncmp(name, part->header.name, 12))
- continue;
- return part;
- }
- return NULL;
-}
-EXPORT_SYMBOL(nvram_find_partition);
-
-
-static int nvram_remove_os_partition(void)
+static int __init nvram_remove_os_partition(void)
{
struct list_head *i;
struct list_head *j;
* Will create a partition starting at the first free
* space found if space has enough room.
*/
-static int nvram_create_os_partition(void)
+static int __init nvram_create_os_partition(void)
{
struct nvram_partition *part;
struct nvram_partition *new_part;
* 5.) If the max chunk cannot be allocated then try finding a chunk
* that will satisfy the minum needed (NVRAM_MIN_REQ).
*/
-static int nvram_setup_partition(void)
+static int __init nvram_setup_partition(void)
{
struct list_head * p;
struct nvram_partition * part;
}
-static int nvram_scan_partitions(void)
+static int __init nvram_scan_partitions(void)
{
loff_t cur_index = 0;
struct nvram_header phead;
int clear_word = ERR_FLAG_ALREADY_LOGGED;
int rc;
+ if (nvram_error_log_index == -1)
+ return -1;
+
tmp_index = nvram_error_log_index;
rc = ppc_md.nvram_write((char *)&clear_word, sizeof(int), &tmp_index);
}
#ifdef CONFIG_PPC64
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define is_huge_psize(pagesize) (HPAGE_SHIFT && mmu_huge_psizes[pagesize])
-#else
-#define is_huge_psize(pagesize) 0
-#endif
-
/*
* On 64-bit we don't want to invoke hash_page on user addresses from
* interrupt context, so if the access faults, we read the page tables
{
pgd_t *pgdir;
pte_t *ptep, pte;
- int pagesize;
+ unsigned shift;
unsigned long addr = (unsigned long) ptr;
unsigned long offset;
unsigned long pfn;
if (!pgdir)
return -EFAULT;
- pagesize = get_slice_psize(current->mm, addr);
+ ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift);
+ if (!shift)
+ shift = PAGE_SHIFT;
/* align address to page boundary */
- offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1);
+ offset = addr & ((1UL << shift) - 1);
addr -= offset;
- if (is_huge_psize(pagesize))
- ptep = huge_pte_offset(current->mm, addr);
- else
- ptep = find_linux_pte(pgdir, addr);
-
if (ptep == NULL)
return -EFAULT;
pte = *ptep;
EXPORT_SYMBOL(isa_io_base);
EXPORT_SYMBOL(isa_mem_base);
EXPORT_SYMBOL(pci_dram_offset);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
#endif /* CONFIG_PCI */
EXPORT_SYMBOL(start_thread);
#ifdef CONFIG_PPC32
EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(irq_desc);
EXPORT_SYMBOL(tb_ticks_per_jiffy);
EXPORT_SYMBOL(cacheable_memcpy);
EXPORT_SYMBOL(cacheable_memzero);
--- /dev/null
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+
+#include <asm/machdep.h>
+#include <asm/vdso_datapage.h>
+#include <asm/rtas.h>
+#include <asm/uaccess.h>
+#include <asm/prom.h>
+
+#ifdef CONFIG_PPC64
+
+static loff_t page_map_seek( struct file *file, loff_t off, int whence)
+{
+ loff_t new;
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
+
+ switch(whence) {
+ case 0:
+ new = off;
+ break;
+ case 1:
+ new = file->f_pos + off;
+ break;
+ case 2:
+ new = dp->size + off;
+ break;
+ default:
+ return -EINVAL;
+ }
+ if ( new < 0 || new > dp->size )
+ return -EINVAL;
+ return (file->f_pos = new);
+}
+
+static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
+ loff_t *ppos)
+{
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
+ return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size);
+}
+
+static int page_map_mmap( struct file *file, struct vm_area_struct *vma )
+{
+ struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
+
+ if ((vma->vm_end - vma->vm_start) > dp->size)
+ return -EINVAL;
+
+ remap_pfn_range(vma, vma->vm_start, __pa(dp->data) >> PAGE_SHIFT,
+ dp->size, vma->vm_page_prot);
+ return 0;
+}
+
+static const struct file_operations page_map_fops = {
+ .llseek = page_map_seek,
+ .read = page_map_read,
+ .mmap = page_map_mmap
+};
+
+
+static int __init proc_ppc64_init(void)
+{
+ struct proc_dir_entry *pde;
+
+ pde = proc_create_data("powerpc/systemcfg", S_IFREG|S_IRUGO, NULL,
+ &page_map_fops, vdso_data);
+ if (!pde)
+ return 1;
+ pde->size = PAGE_SIZE;
+
+ return 0;
+}
+__initcall(proc_ppc64_init);
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * Create the ppc64 and ppc64/rtas directories early. This allows us to
+ * assume that they have been previously created in drivers.
+ */
+static int __init proc_ppc64_create(void)
+{
+ struct proc_dir_entry *root;
+
+ root = proc_mkdir("powerpc", NULL);
+ if (!root)
+ return 1;
+
+#ifdef CONFIG_PPC64
+ if (!proc_symlink("ppc64", NULL, "powerpc"))
+ pr_err("Failed to create link /proc/ppc64 -> /proc/powerpc\n");
+#endif
+
+ if (!of_find_node_by_path("/rtas"))
+ return 0;
+
+ if (!proc_mkdir("rtas", root))
+ return 1;
+
+ if (!proc_symlink("rtas", NULL, "powerpc/rtas"))
+ return 1;
+
+ return 0;
+}
+core_initcall(proc_ppc64_create);
+++ /dev/null
-/*
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-#include <asm/vdso_datapage.h>
-#include <asm/rtas.h>
-#include <asm/uaccess.h>
-#include <asm/prom.h>
-
-static loff_t page_map_seek( struct file *file, loff_t off, int whence);
-static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
- loff_t *ppos);
-static int page_map_mmap( struct file *file, struct vm_area_struct *vma );
-
-static const struct file_operations page_map_fops = {
- .llseek = page_map_seek,
- .read = page_map_read,
- .mmap = page_map_mmap
-};
-
-/*
- * Create the ppc64 and ppc64/rtas directories early. This allows us to
- * assume that they have been previously created in drivers.
- */
-static int __init proc_ppc64_create(void)
-{
- struct proc_dir_entry *root;
-
- root = proc_mkdir("ppc64", NULL);
- if (!root)
- return 1;
-
- if (!of_find_node_by_path("/rtas"))
- return 0;
-
- if (!proc_mkdir("rtas", root))
- return 1;
-
- if (!proc_symlink("rtas", NULL, "ppc64/rtas"))
- return 1;
-
- return 0;
-}
-core_initcall(proc_ppc64_create);
-
-static int __init proc_ppc64_init(void)
-{
- struct proc_dir_entry *pde;
-
- pde = proc_create_data("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL,
- &page_map_fops, vdso_data);
- if (!pde)
- return 1;
- pde->size = PAGE_SIZE;
-
- return 0;
-}
-__initcall(proc_ppc64_init);
-
-static loff_t page_map_seek( struct file *file, loff_t off, int whence)
-{
- loff_t new;
- struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
-
- switch(whence) {
- case 0:
- new = off;
- break;
- case 1:
- new = file->f_pos + off;
- break;
- case 2:
- new = dp->size + off;
- break;
- default:
- return -EINVAL;
- }
- if ( new < 0 || new > dp->size )
- return -EINVAL;
- return (file->f_pos = new);
-}
-
-static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes,
- loff_t *ppos)
-{
- struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
- return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size);
-}
-
-static int page_map_mmap( struct file *file, struct vm_area_struct *vma )
-{
- struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode);
-
- if ((vma->vm_end - vma->vm_start) > dp->size)
- return -EINVAL;
-
- remap_pfn_range(vma, vma->vm_start, __pa(dp->data) >> PAGE_SHIFT,
- dp->size, vma->vm_page_prot);
- return 0;
-}
-
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
- * /proc/ppc64/rtas/firmware_flash interface
+ * /proc/powerpc/rtas/firmware_flash interface
*
* This file implements a firmware_flash interface to pump a firmware
* image into the kernel. At reboot time rtas_restart() will see the
return 1;
}
- firmware_flash_pde = create_flash_pde("ppc64/rtas/"
+ firmware_flash_pde = create_flash_pde("powerpc/rtas/"
FIRMWARE_FLASH_NAME,
&rtas_flash_operations);
if (firmware_flash_pde == NULL) {
if (rc != 0)
goto cleanup;
- firmware_update_pde = create_flash_pde("ppc64/rtas/"
+ firmware_update_pde = create_flash_pde("powerpc/rtas/"
FIRMWARE_UPDATE_NAME,
&rtas_flash_operations);
if (firmware_update_pde == NULL) {
if (rc != 0)
goto cleanup;
- validate_pde = create_flash_pde("ppc64/rtas/" VALIDATE_FLASH_NAME,
+ validate_pde = create_flash_pde("powerpc/rtas/" VALIDATE_FLASH_NAME,
&validate_flash_operations);
if (validate_pde == NULL) {
rc = -ENOMEM;
if (rc != 0)
goto cleanup;
- manage_pde = create_flash_pde("ppc64/rtas/" MANAGE_FLASH_NAME,
+ manage_pde = create_flash_pde("powerpc/rtas/" MANAGE_FLASH_NAME,
&manage_flash_operations);
if (manage_pde == NULL) {
rc = -ENOMEM;
--- /dev/null
+/*
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Communication to userspace based on kernel/printk.c
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/poll.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/vmalloc.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include <linux/workqueue.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/rtas.h>
+#include <asm/prom.h>
+#include <asm/nvram.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+
+
+static DEFINE_SPINLOCK(rtasd_log_lock);
+
+static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
+
+static char *rtas_log_buf;
+static unsigned long rtas_log_start;
+static unsigned long rtas_log_size;
+
+static int surveillance_timeout = -1;
+
+static unsigned int rtas_error_log_max;
+static unsigned int rtas_error_log_buffer_max;
+
+/* RTAS service tokens */
+static unsigned int event_scan;
+static unsigned int rtas_event_scan_rate;
+
+static int full_rtas_msgs = 0;
+
+/* Stop logging to nvram after first fatal error */
+static int logging_enabled; /* Until we initialize everything,
+ * make sure we don't try logging
+ * anything */
+static int error_log_cnt;
+
+/*
+ * Since we use 32 bit RTAS, the physical address of this must be below
+ * 4G or else bad things happen. Allocate this in the kernel data and
+ * make it big enough.
+ */
+static unsigned char logdata[RTAS_ERROR_LOG_MAX];
+
+static char *rtas_type[] = {
+ "Unknown", "Retry", "TCE Error", "Internal Device Failure",
+ "Timeout", "Data Parity", "Address Parity", "Cache Parity",
+ "Address Invalid", "ECC Uncorrected", "ECC Corrupted",
+};
+
+static char *rtas_event_type(int type)
+{
+ if ((type > 0) && (type < 11))
+ return rtas_type[type];
+
+ switch (type) {
+ case RTAS_TYPE_EPOW:
+ return "EPOW";
+ case RTAS_TYPE_PLATFORM:
+ return "Platform Error";
+ case RTAS_TYPE_IO:
+ return "I/O Event";
+ case RTAS_TYPE_INFO:
+ return "Platform Information Event";
+ case RTAS_TYPE_DEALLOC:
+ return "Resource Deallocation Event";
+ case RTAS_TYPE_DUMP:
+ return "Dump Notification Event";
+ }
+
+ return rtas_type[0];
+}
+
+/* To see this info, grep RTAS /var/log/messages and each entry
+ * will be collected together with obvious begin/end.
+ * There will be a unique identifier on the begin and end lines.
+ * This will persist across reboots.
+ *
+ * format of error logs returned from RTAS:
+ * bytes (size) : contents
+ * --------------------------------------------------------
+ * 0-7 (8) : rtas_error_log
+ * 8-47 (40) : extended info
+ * 48-51 (4) : vendor id
+ * 52-1023 (vendor specific) : location code and debug data
+ */
+static void printk_log_rtas(char *buf, int len)
+{
+
+ int i,j,n = 0;
+ int perline = 16;
+ char buffer[64];
+ char * str = "RTAS event";
+
+ if (full_rtas_msgs) {
+ printk(RTAS_DEBUG "%d -------- %s begin --------\n",
+ error_log_cnt, str);
+
+ /*
+ * Print perline bytes on each line, each line will start
+ * with RTAS and a changing number, so syslogd will
+ * print lines that are otherwise the same. Separate every
+ * 4 bytes with a space.
+ */
+ for (i = 0; i < len; i++) {
+ j = i % perline;
+ if (j == 0) {
+ memset(buffer, 0, sizeof(buffer));
+ n = sprintf(buffer, "RTAS %d:", i/perline);
+ }
+
+ if ((i % 4) == 0)
+ n += sprintf(buffer+n, " ");
+
+ n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]);
+
+ if (j == (perline-1))
+ printk(KERN_DEBUG "%s\n", buffer);
+ }
+ if ((i % perline) != 0)
+ printk(KERN_DEBUG "%s\n", buffer);
+
+ printk(RTAS_DEBUG "%d -------- %s end ----------\n",
+ error_log_cnt, str);
+ } else {
+ struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
+
+ printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n",
+ error_log_cnt, rtas_event_type(errlog->type),
+ errlog->severity);
+ }
+}
+
+static int log_rtas_len(char * buf)
+{
+ int len;
+ struct rtas_error_log *err;
+
+ /* rtas fixed header */
+ len = 8;
+ err = (struct rtas_error_log *)buf;
+ if (err->extended_log_length) {
+
+ /* extended header */
+ len += err->extended_log_length;
+ }
+
+ if (rtas_error_log_max == 0)
+ rtas_error_log_max = rtas_get_error_log_max();
+
+ if (len > rtas_error_log_max)
+ len = rtas_error_log_max;
+
+ return len;
+}
+
+/*
+ * First write to nvram, if fatal error, that is the only
+ * place we log the info. The error will be picked up
+ * on the next reboot by rtasd. If not fatal, run the
+ * method for the type of error. Currently, only RTAS
+ * errors have methods implemented, but in the future
+ * there might be a need to store data in nvram before a
+ * call to panic().
+ *
+ * XXX We write to nvram periodically, to indicate error has
+ * been written and sync'd, but there is a possibility
+ * that if we don't shutdown correctly, a duplicate error
+ * record will be created on next reboot.
+ */
+void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
+{
+ unsigned long offset;
+ unsigned long s;
+ int len = 0;
+
+ pr_debug("rtasd: logging event\n");
+ if (buf == NULL)
+ return;
+
+ spin_lock_irqsave(&rtasd_log_lock, s);
+
+ /* get length and increase count */
+ switch (err_type & ERR_TYPE_MASK) {
+ case ERR_TYPE_RTAS_LOG:
+ len = log_rtas_len(buf);
+ if (!(err_type & ERR_FLAG_BOOT))
+ error_log_cnt++;
+ break;
+ case ERR_TYPE_KERNEL_PANIC:
+ default:
+ WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ return;
+ }
+
+#ifdef CONFIG_PPC64
+ /* Write error to NVRAM */
+ if (logging_enabled && !(err_type & ERR_FLAG_BOOT))
+ nvram_write_error_log(buf, len, err_type, error_log_cnt);
+#endif /* CONFIG_PPC64 */
+
+ /*
+ * rtas errors can occur during boot, and we do want to capture
+ * those somewhere, even if nvram isn't ready (why not?), and even
+ * if rtasd isn't ready. Put them into the boot log, at least.
+ */
+ if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG)
+ printk_log_rtas(buf, len);
+
+ /* Check to see if we need to or have stopped logging */
+ if (fatal || !logging_enabled) {
+ logging_enabled = 0;
+ WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ return;
+ }
+
+ /* call type specific method for error */
+ switch (err_type & ERR_TYPE_MASK) {
+ case ERR_TYPE_RTAS_LOG:
+ offset = rtas_error_log_buffer_max *
+ ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK);
+
+ /* First copy over sequence number */
+ memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int));
+
+ /* Second copy over error log data */
+ offset += sizeof(int);
+ memcpy(&rtas_log_buf[offset], buf, len);
+
+ if (rtas_log_size < LOG_NUMBER)
+ rtas_log_size += 1;
+ else
+ rtas_log_start += 1;
+
+ WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ wake_up_interruptible(&rtas_log_wait);
+ break;
+ case ERR_TYPE_KERNEL_PANIC:
+ default:
+ WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ return;
+ }
+
+}
+
+static int rtas_log_open(struct inode * inode, struct file * file)
+{
+ return 0;
+}
+
+static int rtas_log_release(struct inode * inode, struct file * file)
+{
+ return 0;
+}
+
+/* This will check if all events are logged, if they are then, we
+ * know that we can safely clear the events in NVRAM.
+ * Next we'll sit and wait for something else to log.
+ */
+static ssize_t rtas_log_read(struct file * file, char __user * buf,
+ size_t count, loff_t *ppos)
+{
+ int error;
+ char *tmp;
+ unsigned long s;
+ unsigned long offset;
+
+ if (!buf || count < rtas_error_log_buffer_max)
+ return -EINVAL;
+
+ count = rtas_error_log_buffer_max;
+
+ if (!access_ok(VERIFY_WRITE, buf, count))
+ return -EFAULT;
+
+ tmp = kmalloc(count, GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&rtasd_log_lock, s);
+
+ /* if it's 0, then we know we got the last one (the one in NVRAM) */
+ while (rtas_log_size == 0) {
+ if (file->f_flags & O_NONBLOCK) {
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ error = -EAGAIN;
+ goto out;
+ }
+
+ if (!logging_enabled) {
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ error = -ENODATA;
+ goto out;
+ }
+#ifdef CONFIG_PPC64
+ nvram_clear_error_log();
+#endif /* CONFIG_PPC64 */
+
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+ error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
+ if (error)
+ goto out;
+ spin_lock_irqsave(&rtasd_log_lock, s);
+ }
+
+ offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
+ memcpy(tmp, &rtas_log_buf[offset], count);
+
+ rtas_log_start += 1;
+ rtas_log_size -= 1;
+ spin_unlock_irqrestore(&rtasd_log_lock, s);
+
+ error = copy_to_user(buf, tmp, count) ? -EFAULT : count;
+out:
+ kfree(tmp);
+ return error;
+}
+
+static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
+{
+ poll_wait(file, &rtas_log_wait, wait);
+ if (rtas_log_size)
+ return POLLIN | POLLRDNORM;
+ return 0;
+}
+
+static const struct file_operations proc_rtas_log_operations = {
+ .read = rtas_log_read,
+ .poll = rtas_log_poll,
+ .open = rtas_log_open,
+ .release = rtas_log_release,
+};
+
+static int enable_surveillance(int timeout)
+{
+ int error;
+
+ error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout);
+
+ if (error == 0)
+ return 0;
+
+ if (error == -EINVAL) {
+ printk(KERN_DEBUG "rtasd: surveillance not supported\n");
+ return 0;
+ }
+
+ printk(KERN_ERR "rtasd: could not update surveillance\n");
+ return -1;
+}
+
+static void do_event_scan(void)
+{
+ int error;
+ do {
+ memset(logdata, 0, rtas_error_log_max);
+ error = rtas_call(event_scan, 4, 1, NULL,
+ RTAS_EVENT_SCAN_ALL_EVENTS, 0,
+ __pa(logdata), rtas_error_log_max);
+ if (error == -1) {
+ printk(KERN_ERR "event-scan failed\n");
+ break;
+ }
+
+ if (error == 0)
+ pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0);
+
+ } while(error == 0);
+}
+
+static void rtas_event_scan(struct work_struct *w);
+DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
+
+/*
+ * Delay should be at least one second since some machines have problems if
+ * we call event-scan too quickly.
+ */
+static unsigned long event_scan_delay = 1*HZ;
+static int first_pass = 1;
+
+static void rtas_event_scan(struct work_struct *w)
+{
+ unsigned int cpu;
+
+ do_event_scan();
+
+ get_online_cpus();
+
+ cpu = next_cpu(smp_processor_id(), cpu_online_map);
+ if (cpu == NR_CPUS) {
+ cpu = first_cpu(cpu_online_map);
+
+ if (first_pass) {
+ first_pass = 0;
+ event_scan_delay = 30*HZ/rtas_event_scan_rate;
+
+ if (surveillance_timeout != -1) {
+ pr_debug("rtasd: enabling surveillance\n");
+ enable_surveillance(surveillance_timeout);
+ pr_debug("rtasd: surveillance enabled\n");
+ }
+ }
+ }
+
+ schedule_delayed_work_on(cpu, &event_scan_work,
+ __round_jiffies_relative(event_scan_delay, cpu));
+
+ put_online_cpus();
+}
+
+#ifdef CONFIG_PPC64
+static void retreive_nvram_error_log(void)
+{
+ unsigned int err_type ;
+ int rc ;
+
+ /* See if we have any error stored in NVRAM */
+ memset(logdata, 0, rtas_error_log_max);
+ rc = nvram_read_error_log(logdata, rtas_error_log_max,
+ &err_type, &error_log_cnt);
+ /* We can use rtas_log_buf now */
+ logging_enabled = 1;
+ if (!rc) {
+ if (err_type != ERR_FLAG_ALREADY_LOGGED) {
+ pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
+ }
+ }
+}
+#else /* CONFIG_PPC64 */
+static void retreive_nvram_error_log(void)
+{
+}
+#endif /* CONFIG_PPC64 */
+
+static void start_event_scan(void)
+{
+ printk(KERN_DEBUG "RTAS daemon started\n");
+ pr_debug("rtasd: will sleep for %d milliseconds\n",
+ (30000 / rtas_event_scan_rate));
+
+ /* Retreive errors from nvram if any */
+ retreive_nvram_error_log();
+
+ schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
+ event_scan_delay);
+}
+
+static int __init rtas_init(void)
+{
+ struct proc_dir_entry *entry;
+
+ if (!machine_is(pseries) && !machine_is(chrp))
+ return 0;
+
+ /* No RTAS */
+ event_scan = rtas_token("event-scan");
+ if (event_scan == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_INFO "rtasd: No event-scan on system\n");
+ return -ENODEV;
+ }
+
+ rtas_event_scan_rate = rtas_token("rtas-event-scan-rate");
+ if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) {
+ printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n");
+ return -ENODEV;
+ }
+
+ /* Make room for the sequence number */
+ rtas_error_log_max = rtas_get_error_log_max();
+ rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
+
+ rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER);
+ if (!rtas_log_buf) {
+ printk(KERN_ERR "rtasd: no memory\n");
+ return -ENOMEM;
+ }
+
+ entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL,
+ &proc_rtas_log_operations);
+ if (!entry)
+ printk(KERN_ERR "Failed to create error_log proc entry\n");
+
+ start_event_scan();
+
+ return 0;
+}
+__initcall(rtas_init);
+
+static int __init surveillance_setup(char *str)
+{
+ int i;
+
+ /* We only do surveillance on pseries */
+ if (!machine_is(pseries))
+ return 0;
+
+ if (get_option(&str,&i)) {
+ if (i >= 0 && i <= 255)
+ surveillance_timeout = i;
+ }
+
+ return 1;
+}
+__setup("surveillance=", surveillance_setup);
+
+static int __init rtasmsgs_setup(char *str)
+{
+ if (strcmp(str, "on") == 0)
+ full_rtas_msgs = 1;
+ else if (strcmp(str, "off") == 0)
+ full_rtas_msgs = 0;
+
+ return 1;
+}
+__setup("rtasmsgs=", rtasmsgs_setup);
*/
initialize_cache_info();
- /*
- * Initialize irq remapping subsystem
- */
- irq_early_init();
-
#ifdef CONFIG_PPC_RTAS
/*
* Initialize RTAS if available
static void stop_this_cpu(void *dummy)
{
+ /* Remove this CPU */
+ set_cpu_online(smp_processor_id(), false);
+
local_irq_disable();
while (1)
;
cacheinfo_cpu_offline(cpu);
}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+ssize_t arch_cpu_probe(const char *buf, size_t count)
+{
+ if (ppc_md.cpu_probe)
+ return ppc_md.cpu_probe(buf, count);
+
+ return -EINVAL;
+}
+
+ssize_t arch_cpu_release(const char *buf, size_t count)
+{
+ if (ppc_md.cpu_release)
+ return ppc_md.cpu_release(buf, count);
+
+ return -EINVAL;
+}
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
#endif /* CONFIG_HOTPLUG_CPU */
static int __cpuinit sysfs_cpu_notify(struct notifier_block *self,
per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled;
local_irq_restore(flags);
}
+EXPORT_SYMBOL_GPL(account_system_vtime);
/*
* Transfer the user and system times accumulated in the paca
return ppc_md.set_rtc_time(&tm);
}
-void read_persistent_clock(struct timespec *ts)
+static void __read_persistent_clock(struct timespec *ts)
{
struct rtc_time tm;
static int first = 1;
return;
}
ppc_md.get_rtc_time(&tm);
+
ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
+void read_persistent_clock(struct timespec *ts)
+{
+ __read_persistent_clock(ts);
+
+ /* Sanitize it in case real time clock is set below EPOCH */
+ if (ts->tv_sec < 0) {
+ ts->tv_sec = 0;
+ ts->tv_nsec = 0;
+ }
+
+}
+
/* clocksource code */
static cycle_t rtc_read(struct clocksource *cs)
{
info.si_code = code;
info.si_addr = (void __user *) addr;
force_sig_info(signr, &info, current);
-
- /*
- * Init gets no signals that it doesn't have a handler for.
- * That's all very well, but if it has caused a synchronous
- * exception and we ignore the resulting signal, it will just
- * generate the same exception over and over again and we get
- * nowhere. Better to kill it and let the kernel panic.
- */
- if (is_global_init(current)) {
- __sighandler_t handler;
-
- spin_lock_irq(¤t->sighand->siglock);
- handler = current->sighand->action[signr-1].sa.sa_handler;
- spin_unlock_irq(¤t->sighand->siglock);
- if (handler == SIG_DFL) {
- /* init has generated a synchronous exception
- and it doesn't have a handler for the signal */
- printk(KERN_CRIT "init has generated signal %d "
- "but has no handler for it\n", signr);
- do_exit(signr);
- }
- }
}
#ifdef CONFIG_PPC64
select PREEMPT_NOTIFIERS
select ANON_INODES
+config KVM_BOOK3S_64_HANDLER
+ bool
+
+config KVM_BOOK3S_64
+ tristate "KVM support for PowerPC book3s_64 processors"
+ depends on EXPERIMENTAL && PPC64
+ select KVM
+ select KVM_BOOK3S_64_HANDLER
+ ---help---
+ Support running unmodified book3s_64 and book3s_32 guest kernels
+ in virtual machines on book3s_64 host processors.
+
+ This module provides access to the hardware capabilities through
+ a character device node named /dev/kvm.
+
+ If unsure, say N.
+
config KVM_440
bool "KVM support for PowerPC 440 processors"
depends on EXPERIMENTAL && 44x
CFLAGS_e500_tlb.o := -I.
CFLAGS_emulate.o := -I.
-kvm-objs := $(common-objs-y) powerpc.o emulate.o
+common-objs-y += powerpc.o emulate.o
obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
-obj-$(CONFIG_KVM) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_64_HANDLER) += book3s_64_exports.o
AFLAGS_booke_interrupts.o := -I$(obj)
kvm-440-objs := \
+ $(common-objs-y) \
booke.o \
booke_emulate.o \
booke_interrupts.o \
44x.o \
44x_tlb.o \
44x_emulate.o
-obj-$(CONFIG_KVM_440) += kvm-440.o
+kvm-objs-$(CONFIG_KVM_440) := $(kvm-440-objs)
kvm-e500-objs := \
+ $(common-objs-y) \
booke.o \
booke_emulate.o \
booke_interrupts.o \
e500.o \
e500_tlb.o \
e500_emulate.o
-obj-$(CONFIG_KVM_E500) += kvm-e500.o
+kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs)
+
+kvm-book3s_64-objs := \
+ $(common-objs-y) \
+ book3s.o \
+ book3s_64_emulate.o \
+ book3s_64_interrupts.o \
+ book3s_64_mmu_host.o \
+ book3s_64_mmu.o \
+ book3s_32_mmu.o
+kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-objs)
+
+kvm-objs := $(kvm-objs-m) $(kvm-objs-y)
+
+obj-$(CONFIG_KVM_440) += kvm.o
+obj-$(CONFIG_KVM_E500) += kvm.o
+obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o
+
--- /dev/null
+/*
+ * Copyright (C) 2009. SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ * Alexander Graf <agraf@suse.de>
+ * Kevin Wolf <mail@kevin-wolf.de>
+ *
+ * Description:
+ * This file is derived from arch/powerpc/kvm/44x.c,
+ * by Hollis Blanchard <hollisb@us.ibm.com>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kvm_host.h>
+#include <linux/err.h>
+
+#include <asm/reg.h>
+#include <asm/cputable.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu_context.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+
+#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
+
+/* #define EXIT_DEBUG */
+/* #define EXIT_DEBUG_SIMPLE */
+
+/* Without AGGRESSIVE_DEC we only fire off a DEC interrupt when DEC turns 0.
+ * When set, we retrigger a DEC interrupt after that if DEC <= 0.
+ * PPC32 Linux runs faster without AGGRESSIVE_DEC, PPC64 Linux requires it. */
+
+/* #define AGGRESSIVE_DEC */
+
+struct kvm_stats_debugfs_item debugfs_entries[] = {
+ { "exits", VCPU_STAT(sum_exits) },
+ { "mmio", VCPU_STAT(mmio_exits) },
+ { "sig", VCPU_STAT(signal_exits) },
+ { "sysc", VCPU_STAT(syscall_exits) },
+ { "inst_emu", VCPU_STAT(emulated_inst_exits) },
+ { "dec", VCPU_STAT(dec_exits) },
+ { "ext_intr", VCPU_STAT(ext_intr_exits) },
+ { "queue_intr", VCPU_STAT(queue_intr) },
+ { "halt_wakeup", VCPU_STAT(halt_wakeup) },
+ { "pf_storage", VCPU_STAT(pf_storage) },
+ { "sp_storage", VCPU_STAT(sp_storage) },
+ { "pf_instruc", VCPU_STAT(pf_instruc) },
+ { "sp_instruc", VCPU_STAT(sp_instruc) },
+ { "ld", VCPU_STAT(ld) },
+ { "ld_slow", VCPU_STAT(ld_slow) },
+ { "st", VCPU_STAT(st) },
+ { "st_slow", VCPU_STAT(st_slow) },
+ { NULL }
+};
+
+void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu)
+{
+}
+
+void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+ memcpy(get_paca()->kvm_slb, to_book3s(vcpu)->slb_shadow, sizeof(get_paca()->kvm_slb));
+ get_paca()->kvm_slb_max = to_book3s(vcpu)->slb_shadow_max;
+}
+
+void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu)
+{
+ memcpy(to_book3s(vcpu)->slb_shadow, get_paca()->kvm_slb, sizeof(get_paca()->kvm_slb));
+ to_book3s(vcpu)->slb_shadow_max = get_paca()->kvm_slb_max;
+}
+
+#if defined(AGGRESSIVE_DEC) || defined(EXIT_DEBUG)
+static u32 kvmppc_get_dec(struct kvm_vcpu *vcpu)
+{
+ u64 jd = mftb() - vcpu->arch.dec_jiffies;
+ return vcpu->arch.dec - jd;
+}
+#endif
+
+void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr)
+{
+ ulong old_msr = vcpu->arch.msr;
+
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr);
+#endif
+ msr &= to_book3s(vcpu)->msr_mask;
+ vcpu->arch.msr = msr;
+ vcpu->arch.shadow_msr = msr | MSR_USER32;
+ vcpu->arch.shadow_msr &= ( MSR_VEC | MSR_VSX | MSR_FP | MSR_FE0 |
+ MSR_USER64 | MSR_SE | MSR_BE | MSR_DE |
+ MSR_FE1);
+
+ if (msr & (MSR_WE|MSR_POW)) {
+ if (!vcpu->arch.pending_exceptions) {
+ kvm_vcpu_block(vcpu);
+ vcpu->stat.halt_wakeup++;
+ }
+ }
+
+ if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) ||
+ (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) {
+ kvmppc_mmu_flush_segments(vcpu);
+ kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+ }
+}
+
+void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags)
+{
+ vcpu->arch.srr0 = vcpu->arch.pc;
+ vcpu->arch.srr1 = vcpu->arch.msr | flags;
+ vcpu->arch.pc = to_book3s(vcpu)->hior + vec;
+ vcpu->arch.mmu.reset_msr(vcpu);
+}
+
+void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec)
+{
+ unsigned int prio;
+
+ vcpu->stat.queue_intr++;
+ switch (vec) {
+ case 0x100: prio = BOOK3S_IRQPRIO_SYSTEM_RESET; break;
+ case 0x200: prio = BOOK3S_IRQPRIO_MACHINE_CHECK; break;
+ case 0x300: prio = BOOK3S_IRQPRIO_DATA_STORAGE; break;
+ case 0x380: prio = BOOK3S_IRQPRIO_DATA_SEGMENT; break;
+ case 0x400: prio = BOOK3S_IRQPRIO_INST_STORAGE; break;
+ case 0x480: prio = BOOK3S_IRQPRIO_INST_SEGMENT; break;
+ case 0x500: prio = BOOK3S_IRQPRIO_EXTERNAL; break;
+ case 0x600: prio = BOOK3S_IRQPRIO_ALIGNMENT; break;
+ case 0x700: prio = BOOK3S_IRQPRIO_PROGRAM; break;
+ case 0x800: prio = BOOK3S_IRQPRIO_FP_UNAVAIL; break;
+ case 0x900: prio = BOOK3S_IRQPRIO_DECREMENTER; break;
+ case 0xc00: prio = BOOK3S_IRQPRIO_SYSCALL; break;
+ case 0xd00: prio = BOOK3S_IRQPRIO_DEBUG; break;
+ case 0xf20: prio = BOOK3S_IRQPRIO_ALTIVEC; break;
+ case 0xf40: prio = BOOK3S_IRQPRIO_VSX; break;
+ default: prio = BOOK3S_IRQPRIO_MAX; break;
+ }
+
+ set_bit(prio, &vcpu->arch.pending_exceptions);
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "Queueing interrupt %x\n", vec);
+#endif
+}
+
+
+void kvmppc_core_queue_program(struct kvm_vcpu *vcpu)
+{
+ kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_PROGRAM);
+}
+
+void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu)
+{
+ kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DECREMENTER);
+}
+
+int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu)
+{
+ return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions);
+}
+
+void kvmppc_core_queue_external(struct kvm_vcpu *vcpu,
+ struct kvm_interrupt *irq)
+{
+ kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL);
+}
+
+int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority)
+{
+ int deliver = 1;
+ int vec = 0;
+
+ switch (priority) {
+ case BOOK3S_IRQPRIO_DECREMENTER:
+ deliver = vcpu->arch.msr & MSR_EE;
+ vec = BOOK3S_INTERRUPT_DECREMENTER;
+ break;
+ case BOOK3S_IRQPRIO_EXTERNAL:
+ deliver = vcpu->arch.msr & MSR_EE;
+ vec = BOOK3S_INTERRUPT_EXTERNAL;
+ break;
+ case BOOK3S_IRQPRIO_SYSTEM_RESET:
+ vec = BOOK3S_INTERRUPT_SYSTEM_RESET;
+ break;
+ case BOOK3S_IRQPRIO_MACHINE_CHECK:
+ vec = BOOK3S_INTERRUPT_MACHINE_CHECK;
+ break;
+ case BOOK3S_IRQPRIO_DATA_STORAGE:
+ vec = BOOK3S_INTERRUPT_DATA_STORAGE;
+ break;
+ case BOOK3S_IRQPRIO_INST_STORAGE:
+ vec = BOOK3S_INTERRUPT_INST_STORAGE;
+ break;
+ case BOOK3S_IRQPRIO_DATA_SEGMENT:
+ vec = BOOK3S_INTERRUPT_DATA_SEGMENT;
+ break;
+ case BOOK3S_IRQPRIO_INST_SEGMENT:
+ vec = BOOK3S_INTERRUPT_INST_SEGMENT;
+ break;
+ case BOOK3S_IRQPRIO_ALIGNMENT:
+ vec = BOOK3S_INTERRUPT_ALIGNMENT;
+ break;
+ case BOOK3S_IRQPRIO_PROGRAM:
+ vec = BOOK3S_INTERRUPT_PROGRAM;
+ break;
+ case BOOK3S_IRQPRIO_VSX:
+ vec = BOOK3S_INTERRUPT_VSX;
+ break;
+ case BOOK3S_IRQPRIO_ALTIVEC:
+ vec = BOOK3S_INTERRUPT_ALTIVEC;
+ break;
+ case BOOK3S_IRQPRIO_FP_UNAVAIL:
+ vec = BOOK3S_INTERRUPT_FP_UNAVAIL;
+ break;
+ case BOOK3S_IRQPRIO_SYSCALL:
+ vec = BOOK3S_INTERRUPT_SYSCALL;
+ break;
+ case BOOK3S_IRQPRIO_DEBUG:
+ vec = BOOK3S_INTERRUPT_TRACE;
+ break;
+ case BOOK3S_IRQPRIO_PERFORMANCE_MONITOR:
+ vec = BOOK3S_INTERRUPT_PERFMON;
+ break;
+ default:
+ deliver = 0;
+ printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority);
+ break;
+ }
+
+#if 0
+ printk(KERN_INFO "Deliver interrupt 0x%x? %x\n", vec, deliver);
+#endif
+
+ if (deliver)
+ kvmppc_inject_interrupt(vcpu, vec, 0ULL);
+
+ return deliver;
+}
+
+void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu)
+{
+ unsigned long *pending = &vcpu->arch.pending_exceptions;
+ unsigned int priority;
+
+ /* XXX be more clever here - no need to mftb() on every entry */
+ /* Issue DEC again if it's still active */
+#ifdef AGGRESSIVE_DEC
+ if (vcpu->arch.msr & MSR_EE)
+ if (kvmppc_get_dec(vcpu) & 0x80000000)
+ kvmppc_core_queue_dec(vcpu);
+#endif
+
+#ifdef EXIT_DEBUG
+ if (vcpu->arch.pending_exceptions)
+ printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions);
+#endif
+ priority = __ffs(*pending);
+ while (priority <= (sizeof(unsigned int) * 8)) {
+ if (kvmppc_book3s_irqprio_deliver(vcpu, priority)) {
+ clear_bit(priority, &vcpu->arch.pending_exceptions);
+ break;
+ }
+
+ priority = find_next_bit(pending,
+ BITS_PER_BYTE * sizeof(*pending),
+ priority + 1);
+ }
+}
+
+void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr)
+{
+ vcpu->arch.hflags &= ~BOOK3S_HFLAG_SLB;
+ vcpu->arch.pvr = pvr;
+ if ((pvr >= 0x330000) && (pvr < 0x70330000)) {
+ kvmppc_mmu_book3s_64_init(vcpu);
+ to_book3s(vcpu)->hior = 0xfff00000;
+ to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL;
+ } else {
+ kvmppc_mmu_book3s_32_init(vcpu);
+ to_book3s(vcpu)->hior = 0;
+ to_book3s(vcpu)->msr_mask = 0xffffffffULL;
+ }
+
+ /* If we are in hypervisor level on 970, we can tell the CPU to
+ * treat DCBZ as 32 bytes store */
+ vcpu->arch.hflags &= ~BOOK3S_HFLAG_DCBZ32;
+ if (vcpu->arch.mmu.is_dcbz32(vcpu) && (mfmsr() & MSR_HV) &&
+ !strcmp(cur_cpu_spec->platform, "ppc970"))
+ vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+
+}
+
+/* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To
+ * make Book3s_32 Linux work on Book3s_64, we have to make sure we trap dcbz to
+ * emulate 32 bytes dcbz length.
+ *
+ * The Book3s_64 inventors also realized this case and implemented a special bit
+ * in the HID5 register, which is a hypervisor ressource. Thus we can't use it.
+ *
+ * My approach here is to patch the dcbz instruction on executing pages.
+ */
+static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte)
+{
+ bool touched = false;
+ hva_t hpage;
+ u32 *page;
+ int i;
+
+ hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+ if (kvm_is_error_hva(hpage))
+ return;
+
+ hpage |= pte->raddr & ~PAGE_MASK;
+ hpage &= ~0xFFFULL;
+
+ page = vmalloc(HW_PAGE_SIZE);
+
+ if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE))
+ goto out;
+
+ for (i=0; i < HW_PAGE_SIZE / 4; i++)
+ if ((page[i] & 0xff0007ff) == INS_DCBZ) {
+ page[i] &= 0xfffffff7; // reserved instruction, so we trap
+ touched = true;
+ }
+
+ if (touched)
+ copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE);
+
+out:
+ vfree(page);
+}
+
+static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data,
+ struct kvmppc_pte *pte)
+{
+ int relocated = (vcpu->arch.msr & (data ? MSR_DR : MSR_IR));
+ int r;
+
+ if (relocated) {
+ r = vcpu->arch.mmu.xlate(vcpu, eaddr, pte, data);
+ } else {
+ pte->eaddr = eaddr;
+ pte->raddr = eaddr & 0xffffffff;
+ pte->vpage = eaddr >> 12;
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ pte->vpage |= VSID_REAL;
+ case MSR_DR:
+ pte->vpage |= VSID_REAL_DR;
+ case MSR_IR:
+ pte->vpage |= VSID_REAL_IR;
+ }
+ pte->may_read = true;
+ pte->may_write = true;
+ pte->may_execute = true;
+ r = 0;
+ }
+
+ return r;
+}
+
+static hva_t kvmppc_bad_hva(void)
+{
+ return PAGE_OFFSET;
+}
+
+static hva_t kvmppc_pte_to_hva(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte,
+ bool read)
+{
+ hva_t hpage;
+
+ if (read && !pte->may_read)
+ goto err;
+
+ if (!read && !pte->may_write)
+ goto err;
+
+ hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT);
+ if (kvm_is_error_hva(hpage))
+ goto err;
+
+ return hpage | (pte->raddr & ~PAGE_MASK);
+err:
+ return kvmppc_bad_hva();
+}
+
+int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr)
+{
+ struct kvmppc_pte pte;
+ hva_t hva = eaddr;
+
+ vcpu->stat.st++;
+
+ if (kvmppc_xlate(vcpu, eaddr, false, &pte))
+ goto err;
+
+ hva = kvmppc_pte_to_hva(vcpu, &pte, false);
+ if (kvm_is_error_hva(hva))
+ goto err;
+
+ if (copy_to_user((void __user *)hva, ptr, size)) {
+ printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ return -ENOENT;
+}
+
+int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr,
+ bool data)
+{
+ struct kvmppc_pte pte;
+ hva_t hva = eaddr;
+
+ vcpu->stat.ld++;
+
+ if (kvmppc_xlate(vcpu, eaddr, data, &pte))
+ goto err;
+
+ hva = kvmppc_pte_to_hva(vcpu, &pte, true);
+ if (kvm_is_error_hva(hva))
+ goto err;
+
+ if (copy_from_user(ptr, (void __user *)hva, size)) {
+ printk(KERN_INFO "kvmppc_ld at 0x%lx failed\n", hva);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ return -ENOENT;
+}
+
+static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+ return kvm_is_visible_gfn(vcpu->kvm, gfn);
+}
+
+int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ ulong eaddr, int vec)
+{
+ bool data = (vec == BOOK3S_INTERRUPT_DATA_STORAGE);
+ int r = RESUME_GUEST;
+ int relocated;
+ int page_found = 0;
+ struct kvmppc_pte pte;
+ bool is_mmio = false;
+
+ if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) {
+ relocated = (vcpu->arch.msr & MSR_DR);
+ } else {
+ relocated = (vcpu->arch.msr & MSR_IR);
+ }
+
+ /* Resolve real address if translation turned on */
+ if (relocated) {
+ page_found = vcpu->arch.mmu.xlate(vcpu, eaddr, &pte, data);
+ } else {
+ pte.may_execute = true;
+ pte.may_read = true;
+ pte.may_write = true;
+ pte.raddr = eaddr & 0xffffffff;
+ pte.eaddr = eaddr;
+ pte.vpage = eaddr >> 12;
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ pte.vpage |= VSID_REAL;
+ case MSR_DR:
+ pte.vpage |= VSID_REAL_DR;
+ case MSR_IR:
+ pte.vpage |= VSID_REAL_IR;
+ }
+ }
+
+ if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
+ /*
+ * If we do the dcbz hack, we have to NX on every execution,
+ * so we can patch the executing code. This renders our guest
+ * NX-less.
+ */
+ pte.may_execute = !data;
+ }
+
+ if (page_found == -ENOENT) {
+ /* Page not found in guest PTE entries */
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+ vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+ kvmppc_book3s_queue_irqprio(vcpu, vec);
+ } else if (page_found == -EPERM) {
+ /* Storage protection */
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE;
+ to_book3s(vcpu)->dsisr |= DSISR_PROTFAULT;
+ vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL);
+ kvmppc_book3s_queue_irqprio(vcpu, vec);
+ } else if (page_found == -EINVAL) {
+ /* Page not found in guest SLB */
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80);
+ } else if (!is_mmio &&
+ kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) {
+ /* The guest's PTE is not mapped yet. Map on the host */
+ kvmppc_mmu_map_page(vcpu, &pte);
+ if (data)
+ vcpu->stat.sp_storage++;
+ else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32)))
+ kvmppc_patch_dcbz(vcpu, &pte);
+ } else {
+ /* MMIO */
+ vcpu->stat.mmio_exits++;
+ vcpu->arch.paddr_accessed = pte.raddr;
+ r = kvmppc_emulate_mmio(run, vcpu);
+ if ( r == RESUME_HOST_NV )
+ r = RESUME_HOST;
+ if ( r == RESUME_GUEST_NV )
+ r = RESUME_GUEST;
+ }
+
+ return r;
+}
+
+int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ unsigned int exit_nr)
+{
+ int r = RESUME_HOST;
+
+ vcpu->stat.sum_exits++;
+
+ run->exit_reason = KVM_EXIT_UNKNOWN;
+ run->ready_for_interrupt_injection = 1;
+#ifdef EXIT_DEBUG
+ printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | dec=0x%x | msr=0x%lx\n",
+ exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+ kvmppc_get_dec(vcpu), vcpu->arch.msr);
+#elif defined (EXIT_DEBUG_SIMPLE)
+ if ((exit_nr != 0x900) && (exit_nr != 0x500))
+ printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | msr=0x%lx\n",
+ exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear,
+ vcpu->arch.msr);
+#endif
+ kvm_resched(vcpu);
+ switch (exit_nr) {
+ case BOOK3S_INTERRUPT_INST_STORAGE:
+ vcpu->stat.pf_instruc++;
+ /* only care about PTEG not found errors, but leave NX alone */
+ if (vcpu->arch.shadow_msr & 0x40000000) {
+ r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.pc, exit_nr);
+ vcpu->stat.sp_instruc++;
+ } else if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) {
+ /*
+ * XXX If we do the dcbz hack we use the NX bit to flush&patch the page,
+ * so we can't use the NX bit inside the guest. Let's cross our fingers,
+ * that no guest that needs the dcbz hack does NX.
+ */
+ kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+ } else {
+ vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x58000000);
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL);
+ r = RESUME_GUEST;
+ }
+ break;
+ case BOOK3S_INTERRUPT_DATA_STORAGE:
+ vcpu->stat.pf_storage++;
+ /* The only case we need to handle is missing shadow PTEs */
+ if (vcpu->arch.fault_dsisr & DSISR_NOHPTE) {
+ r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.fault_dear, exit_nr);
+ } else {
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr;
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFULL);
+ r = RESUME_GUEST;
+ }
+ break;
+ case BOOK3S_INTERRUPT_DATA_SEGMENT:
+ if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.fault_dear) < 0) {
+ vcpu->arch.dear = vcpu->arch.fault_dear;
+ kvmppc_book3s_queue_irqprio(vcpu,
+ BOOK3S_INTERRUPT_DATA_SEGMENT);
+ }
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_INST_SEGMENT:
+ if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc) < 0) {
+ kvmppc_book3s_queue_irqprio(vcpu,
+ BOOK3S_INTERRUPT_INST_SEGMENT);
+ }
+ r = RESUME_GUEST;
+ break;
+ /* We're good on these - the host merely wanted to get our attention */
+ case BOOK3S_INTERRUPT_DECREMENTER:
+ vcpu->stat.dec_exits++;
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_EXTERNAL:
+ vcpu->stat.ext_intr_exits++;
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_PROGRAM:
+ {
+ enum emulation_result er;
+
+ if (vcpu->arch.msr & MSR_PR) {
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", vcpu->arch.pc, vcpu->arch.last_inst);
+#endif
+ if ((vcpu->arch.last_inst & 0xff0007ff) !=
+ (INS_DCBZ & 0xfffffff7)) {
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ }
+ }
+
+ vcpu->stat.emulated_inst_exits++;
+ er = kvmppc_emulate_instruction(run, vcpu);
+ switch (er) {
+ case EMULATE_DONE:
+ r = RESUME_GUEST;
+ break;
+ case EMULATE_FAIL:
+ printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
+ __func__, vcpu->arch.pc, vcpu->arch.last_inst);
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ default:
+ BUG();
+ }
+ break;
+ }
+ case BOOK3S_INTERRUPT_SYSCALL:
+#ifdef EXIT_DEBUG
+ printk(KERN_INFO "Syscall Nr %d\n", (int)vcpu->arch.gpr[0]);
+#endif
+ vcpu->stat.syscall_exits++;
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ case BOOK3S_INTERRUPT_MACHINE_CHECK:
+ case BOOK3S_INTERRUPT_FP_UNAVAIL:
+ case BOOK3S_INTERRUPT_TRACE:
+ case BOOK3S_INTERRUPT_ALTIVEC:
+ case BOOK3S_INTERRUPT_VSX:
+ kvmppc_book3s_queue_irqprio(vcpu, exit_nr);
+ r = RESUME_GUEST;
+ break;
+ default:
+ /* Ugh - bork here! What did we get? */
+ printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n", exit_nr, vcpu->arch.pc, vcpu->arch.shadow_msr);
+ r = RESUME_HOST;
+ BUG();
+ break;
+ }
+
+
+ if (!(r & RESUME_HOST)) {
+ /* To avoid clobbering exit_reason, only check for signals if
+ * we aren't already exiting to userspace for some other
+ * reason. */
+ if (signal_pending(current)) {
+#ifdef EXIT_DEBUG
+ printk(KERN_EMERG "KVM: Going back to host\n");
+#endif
+ vcpu->stat.signal_exits++;
+ run->exit_reason = KVM_EXIT_INTR;
+ r = -EINTR;
+ } else {
+ /* In case an interrupt came in that was triggered
+ * from userspace (like DEC), we need to check what
+ * to inject now! */
+ kvmppc_core_deliver_interrupts(vcpu);
+ }
+ }
+
+#ifdef EXIT_DEBUG
+ printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, vcpu->arch.pc, r);
+#endif
+
+ return r;
+}
+
+int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
+{
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+ int i;
+
+ regs->pc = vcpu->arch.pc;
+ regs->cr = vcpu->arch.cr;
+ regs->ctr = vcpu->arch.ctr;
+ regs->lr = vcpu->arch.lr;
+ regs->xer = vcpu->arch.xer;
+ regs->msr = vcpu->arch.msr;
+ regs->srr0 = vcpu->arch.srr0;
+ regs->srr1 = vcpu->arch.srr1;
+ regs->pid = vcpu->arch.pid;
+ regs->sprg0 = vcpu->arch.sprg0;
+ regs->sprg1 = vcpu->arch.sprg1;
+ regs->sprg2 = vcpu->arch.sprg2;
+ regs->sprg3 = vcpu->arch.sprg3;
+ regs->sprg5 = vcpu->arch.sprg4;
+ regs->sprg6 = vcpu->arch.sprg5;
+ regs->sprg7 = vcpu->arch.sprg6;
+
+ for (i = 0; i < ARRAY_SIZE(regs->gpr); i++)
+ regs->gpr[i] = vcpu->arch.gpr[i];
+
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
+{
+ int i;
+
+ vcpu->arch.pc = regs->pc;
+ vcpu->arch.cr = regs->cr;
+ vcpu->arch.ctr = regs->ctr;
+ vcpu->arch.lr = regs->lr;
+ vcpu->arch.xer = regs->xer;
+ kvmppc_set_msr(vcpu, regs->msr);
+ vcpu->arch.srr0 = regs->srr0;
+ vcpu->arch.srr1 = regs->srr1;
+ vcpu->arch.sprg0 = regs->sprg0;
+ vcpu->arch.sprg1 = regs->sprg1;
+ vcpu->arch.sprg2 = regs->sprg2;
+ vcpu->arch.sprg3 = regs->sprg3;
+ vcpu->arch.sprg5 = regs->sprg4;
+ vcpu->arch.sprg6 = regs->sprg5;
+ vcpu->arch.sprg7 = regs->sprg6;
+
+ for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++)
+ vcpu->arch.gpr[i] = regs->gpr[i];
+
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
+ struct kvm_sregs *sregs)
+{
+ struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+ int i;
+
+ sregs->pvr = vcpu->arch.pvr;
+
+ sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1;
+ if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) {
+ for (i = 0; i < 64; i++) {
+ sregs->u.s.ppc64.slb[i].slbe = vcpu3s->slb[i].orige | i;
+ sregs->u.s.ppc64.slb[i].slbv = vcpu3s->slb[i].origv;
+ }
+ } else {
+ for (i = 0; i < 16; i++) {
+ sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw;
+ sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw;
+ }
+ for (i = 0; i < 8; i++) {
+ sregs->u.s.ppc32.ibat[i] = vcpu3s->ibat[i].raw;
+ sregs->u.s.ppc32.dbat[i] = vcpu3s->dbat[i].raw;
+ }
+ }
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
+ struct kvm_sregs *sregs)
+{
+ struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu);
+ int i;
+
+ kvmppc_set_pvr(vcpu, sregs->pvr);
+
+ vcpu3s->sdr1 = sregs->u.s.sdr1;
+ if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) {
+ for (i = 0; i < 64; i++) {
+ vcpu->arch.mmu.slbmte(vcpu, sregs->u.s.ppc64.slb[i].slbv,
+ sregs->u.s.ppc64.slb[i].slbe);
+ }
+ } else {
+ for (i = 0; i < 16; i++) {
+ vcpu->arch.mmu.mtsrin(vcpu, i, sregs->u.s.ppc32.sr[i]);
+ }
+ for (i = 0; i < 8; i++) {
+ kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), false,
+ (u32)sregs->u.s.ppc32.ibat[i]);
+ kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), true,
+ (u32)(sregs->u.s.ppc32.ibat[i] >> 32));
+ kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), false,
+ (u32)sregs->u.s.ppc32.dbat[i]);
+ kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), true,
+ (u32)(sregs->u.s.ppc32.dbat[i] >> 32));
+ }
+ }
+
+ /* Flush the MMU after messing with the segments */
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ return 0;
+}
+
+int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+ return -ENOTSUPP;
+}
+
+int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu)
+{
+ return -ENOTSUPP;
+}
+
+int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
+ struct kvm_translation *tr)
+{
+ return 0;
+}
+
+/*
+ * Get (and clear) the dirty memory log for a memory slot.
+ */
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
+ struct kvm_dirty_log *log)
+{
+ struct kvm_memory_slot *memslot;
+ struct kvm_vcpu *vcpu;
+ ulong ga, ga_end;
+ int is_dirty = 0;
+ int r, n;
+
+ down_write(&kvm->slots_lock);
+
+ r = kvm_get_dirty_log(kvm, log, &is_dirty);
+ if (r)
+ goto out;
+
+ /* If nothing is dirty, don't bother messing with page tables. */
+ if (is_dirty) {
+ memslot = &kvm->memslots[log->slot];
+
+ ga = memslot->base_gfn << PAGE_SHIFT;
+ ga_end = ga + (memslot->npages << PAGE_SHIFT);
+
+ kvm_for_each_vcpu(n, vcpu, kvm)
+ kvmppc_mmu_pte_pflush(vcpu, ga, ga_end);
+
+ n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
+ memset(memslot->dirty_bitmap, 0, n);
+ }
+
+ r = 0;
+out:
+ up_write(&kvm->slots_lock);
+ return r;
+}
+
+int kvmppc_core_check_processor_compat(void)
+{
+ return 0;
+}
+
+struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s;
+ struct kvm_vcpu *vcpu;
+ int err;
+
+ vcpu_book3s = (struct kvmppc_vcpu_book3s *)__get_free_pages( GFP_KERNEL | __GFP_ZERO,
+ get_order(sizeof(struct kvmppc_vcpu_book3s)));
+ if (!vcpu_book3s) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ vcpu = &vcpu_book3s->vcpu;
+ err = kvm_vcpu_init(vcpu, kvm, id);
+ if (err)
+ goto free_vcpu;
+
+ vcpu->arch.host_retip = kvm_return_point;
+ vcpu->arch.host_msr = mfmsr();
+ /* default to book3s_64 (970fx) */
+ vcpu->arch.pvr = 0x3C0301;
+ kvmppc_set_pvr(vcpu, vcpu->arch.pvr);
+ vcpu_book3s->slb_nr = 64;
+
+ /* remember where some real-mode handlers are */
+ vcpu->arch.trampoline_lowmem = kvmppc_trampoline_lowmem;
+ vcpu->arch.trampoline_enter = kvmppc_trampoline_enter;
+ vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem;
+
+ vcpu->arch.shadow_msr = MSR_USER64;
+
+ err = __init_new_context();
+ if (err < 0)
+ goto free_vcpu;
+ vcpu_book3s->context_id = err;
+
+ vcpu_book3s->vsid_max = ((vcpu_book3s->context_id + 1) << USER_ESID_BITS) - 1;
+ vcpu_book3s->vsid_first = vcpu_book3s->context_id << USER_ESID_BITS;
+ vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+
+ return vcpu;
+
+free_vcpu:
+ free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+out:
+ return ERR_PTR(err);
+}
+
+void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+
+ __destroy_context(vcpu_book3s->context_id);
+ kvm_vcpu_uninit(vcpu);
+ free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s)));
+}
+
+extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
+int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
+{
+ int ret;
+
+ /* No need to go into the guest when all we do is going out */
+ if (signal_pending(current)) {
+ kvm_run->exit_reason = KVM_EXIT_INTR;
+ return -EINTR;
+ }
+
+ /* XXX we get called with irq disabled - change that! */
+ local_irq_enable();
+
+ ret = __kvmppc_vcpu_entry(kvm_run, vcpu);
+
+ local_irq_disable();
+
+ return ret;
+}
+
+static int kvmppc_book3s_init(void)
+{
+ return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), THIS_MODULE);
+}
+
+static void kvmppc_book3s_exit(void)
+{
+ kvm_exit();
+}
+
+module_init(kvmppc_book3s_init);
+module_exit(kvmppc_book3s_exit);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+
+#include <asm/tlbflush.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_MMU_PTE */
+/* #define DEBUG_MMU_PTE_IP 0xfff14c40 */
+
+#ifdef DEBUG_MMU
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+#ifdef DEBUG_PTE
+#define dprintk_pte(X...) printk(KERN_INFO X)
+#else
+#define dprintk_pte(X...) do { } while(0)
+#endif
+
+#define PTEG_FLAG_ACCESSED 0x00000100
+#define PTEG_FLAG_DIRTY 0x00000080
+
+static inline bool check_debug_ip(struct kvm_vcpu *vcpu)
+{
+#ifdef DEBUG_MMU_PTE_IP
+ return vcpu->arch.pc == DEBUG_MMU_PTE_IP;
+#else
+ return true;
+#endif
+}
+
+static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data);
+
+static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr)
+{
+ return &vcpu_book3s->sr[(eaddr >> 28) & 0xf];
+}
+
+static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
+ bool data)
+{
+ struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr);
+ struct kvmppc_pte pte;
+
+ if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data))
+ return pte.vpage;
+
+ return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16);
+}
+
+static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu)
+{
+ kvmppc_set_msr(vcpu, 0);
+}
+
+static hva_t kvmppc_mmu_book3s_32_get_pteg(struct kvmppc_vcpu_book3s *vcpu_book3s,
+ struct kvmppc_sr *sre, gva_t eaddr,
+ bool primary)
+{
+ u32 page, hash, pteg, htabmask;
+ hva_t r;
+
+ page = (eaddr & 0x0FFFFFFF) >> 12;
+ htabmask = ((vcpu_book3s->sdr1 & 0x1FF) << 16) | 0xFFC0;
+
+ hash = ((sre->vsid ^ page) << 6);
+ if (!primary)
+ hash = ~hash;
+ hash &= htabmask;
+
+ pteg = (vcpu_book3s->sdr1 & 0xffff0000) | hash;
+
+ dprintk("MMU: pc=0x%lx eaddr=0x%lx sdr1=0x%llx pteg=0x%x vsid=0x%x\n",
+ vcpu_book3s->vcpu.arch.pc, eaddr, vcpu_book3s->sdr1, pteg,
+ sre->vsid);
+
+ r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+ if (kvm_is_error_hva(r))
+ return r;
+ return r | (pteg & ~PAGE_MASK);
+}
+
+static u32 kvmppc_mmu_book3s_32_get_ptem(struct kvmppc_sr *sre, gva_t eaddr,
+ bool primary)
+{
+ return ((eaddr & 0x0fffffff) >> 22) | (sre->vsid << 7) |
+ (primary ? 0 : 0x40) | 0x80000000;
+}
+
+static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_bat *bat;
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ if (data)
+ bat = &vcpu_book3s->dbat[i];
+ else
+ bat = &vcpu_book3s->ibat[i];
+
+ if (vcpu->arch.msr & MSR_PR) {
+ if (!bat->vp)
+ continue;
+ } else {
+ if (!bat->vs)
+ continue;
+ }
+
+ if (check_debug_ip(vcpu))
+ {
+ dprintk_pte("%cBAT %02d: 0x%lx - 0x%x (0x%x)\n",
+ data ? 'd' : 'i', i, eaddr, bat->bepi,
+ bat->bepi_mask);
+ }
+ if ((eaddr & bat->bepi_mask) == bat->bepi) {
+ pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask);
+ pte->vpage = (eaddr >> 12) | VSID_BAT;
+ pte->may_read = bat->pp;
+ pte->may_write = bat->pp > 1;
+ pte->may_execute = true;
+ if (!pte->may_read) {
+ printk(KERN_INFO "BAT is not readable!\n");
+ continue;
+ }
+ if (!pte->may_write) {
+ /* let's treat r/o BATs as not-readable for now */
+ dprintk_pte("BAT is read-only!\n");
+ continue;
+ }
+
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data,
+ bool primary)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_sr *sre;
+ hva_t ptegp;
+ u32 pteg[16];
+ u64 ptem = 0;
+ int i;
+ int found = 0;
+
+ sre = find_sr(vcpu_book3s, eaddr);
+
+ dprintk_pte("SR 0x%lx: vsid=0x%x, raw=0x%x\n", eaddr >> 28,
+ sre->vsid, sre->raw);
+
+ pte->vpage = kvmppc_mmu_book3s_32_ea_to_vp(vcpu, eaddr, data);
+
+ ptegp = kvmppc_mmu_book3s_32_get_pteg(vcpu_book3s, sre, eaddr, primary);
+ if (kvm_is_error_hva(ptegp)) {
+ printk(KERN_INFO "KVM: Invalid PTEG!\n");
+ goto no_page_found;
+ }
+
+ ptem = kvmppc_mmu_book3s_32_get_ptem(sre, eaddr, primary);
+
+ if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) {
+ printk(KERN_ERR "KVM: Can't copy data from 0x%lx!\n", ptegp);
+ goto no_page_found;
+ }
+
+ for (i=0; i<16; i+=2) {
+ if (ptem == pteg[i]) {
+ u8 pp;
+
+ pte->raddr = (pteg[i+1] & ~(0xFFFULL)) | (eaddr & 0xFFF);
+ pp = pteg[i+1] & 3;
+
+ if ((sre->Kp && (vcpu->arch.msr & MSR_PR)) ||
+ (sre->Ks && !(vcpu->arch.msr & MSR_PR)))
+ pp |= 4;
+
+ pte->may_write = false;
+ pte->may_read = false;
+ pte->may_execute = true;
+ switch (pp) {
+ case 0:
+ case 1:
+ case 2:
+ case 6:
+ pte->may_write = true;
+ case 3:
+ case 5:
+ case 7:
+ pte->may_read = true;
+ break;
+ }
+
+ if ( !pte->may_read )
+ continue;
+
+ dprintk_pte("MMU: Found PTE -> %x %x - %x\n",
+ pteg[i], pteg[i+1], pp);
+ found = 1;
+ break;
+ }
+ }
+
+ /* Update PTE C and A bits, so the guest's swapper knows we used the
+ page */
+ if (found) {
+ u32 oldpte = pteg[i+1];
+
+ if (pte->may_read)
+ pteg[i+1] |= PTEG_FLAG_ACCESSED;
+ if (pte->may_write)
+ pteg[i+1] |= PTEG_FLAG_DIRTY;
+ else
+ dprintk_pte("KVM: Mapping read-only page!\n");
+
+ /* Write back into the PTEG */
+ if (pteg[i+1] != oldpte)
+ copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+
+ return 0;
+ }
+
+no_page_found:
+
+ if (check_debug_ip(vcpu)) {
+ dprintk_pte("KVM MMU: No PTE found (sdr1=0x%llx ptegp=0x%lx)\n",
+ to_book3s(vcpu)->sdr1, ptegp);
+ for (i=0; i<16; i+=2) {
+ dprintk_pte(" %02d: 0x%x - 0x%x (0x%llx)\n",
+ i, pteg[i], pteg[i+1], ptem);
+ }
+ }
+
+ return -ENOENT;
+}
+
+static int kvmppc_mmu_book3s_32_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *pte, bool data)
+{
+ int r;
+
+ pte->eaddr = eaddr;
+ r = kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, pte, data);
+ if (r < 0)
+ r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, true);
+ if (r < 0)
+ r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, false);
+
+ return r;
+}
+
+
+static u32 kvmppc_mmu_book3s_32_mfsrin(struct kvm_vcpu *vcpu, u32 srnum)
+{
+ return to_book3s(vcpu)->sr[srnum].raw;
+}
+
+static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
+ ulong value)
+{
+ struct kvmppc_sr *sre;
+
+ sre = &to_book3s(vcpu)->sr[srnum];
+
+ /* Flush any left-over shadows from the previous SR */
+
+ /* XXX Not necessary? */
+ /* kvmppc_mmu_pte_flush(vcpu, ((u64)sre->vsid) << 28, 0xf0000000ULL); */
+
+ /* And then put in the new SR */
+ sre->raw = value;
+ sre->vsid = (value & 0x0fffffff);
+ sre->Ks = (value & 0x40000000) ? true : false;
+ sre->Kp = (value & 0x20000000) ? true : false;
+ sre->nx = (value & 0x10000000) ? true : false;
+
+ /* Map the new segment */
+ kvmppc_mmu_map_segment(vcpu, srnum << SID_SHIFT);
+}
+
+static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large)
+{
+ kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL);
+}
+
+static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+ u64 *vsid)
+{
+ /* In case we only have one of MSR_IR or MSR_DR set, let's put
+ that in the real-mode context (and hope RM doesn't access
+ high memory) */
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ *vsid = (VSID_REAL >> 16) | esid;
+ break;
+ case MSR_IR:
+ *vsid = (VSID_REAL_IR >> 16) | esid;
+ break;
+ case MSR_DR:
+ *vsid = (VSID_REAL_DR >> 16) | esid;
+ break;
+ case MSR_DR|MSR_IR:
+ {
+ ulong ea;
+ ea = esid << SID_SHIFT;
+ *vsid = find_sr(to_book3s(vcpu), ea)->vsid;
+ break;
+ }
+ default:
+ BUG();
+ }
+
+ return 0;
+}
+
+static bool kvmppc_mmu_book3s_32_is_dcbz32(struct kvm_vcpu *vcpu)
+{
+ return true;
+}
+
+
+void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_mmu *mmu = &vcpu->arch.mmu;
+
+ mmu->mtsrin = kvmppc_mmu_book3s_32_mtsrin;
+ mmu->mfsrin = kvmppc_mmu_book3s_32_mfsrin;
+ mmu->xlate = kvmppc_mmu_book3s_32_xlate;
+ mmu->reset_msr = kvmppc_mmu_book3s_32_reset_msr;
+ mmu->tlbie = kvmppc_mmu_book3s_32_tlbie;
+ mmu->esid_to_vsid = kvmppc_mmu_book3s_32_esid_to_vsid;
+ mmu->ea_to_vp = kvmppc_mmu_book3s_32_ea_to_vp;
+ mmu->is_dcbz32 = kvmppc_mmu_book3s_32_is_dcbz32;
+
+ mmu->slbmte = NULL;
+ mmu->slbmfee = NULL;
+ mmu->slbmfev = NULL;
+ mmu->slbie = NULL;
+ mmu->slbia = NULL;
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/kvm_ppc.h>
+#include <asm/disassemble.h>
+#include <asm/kvm_book3s.h>
+#include <asm/reg.h>
+
+#define OP_19_XOP_RFID 18
+#define OP_19_XOP_RFI 50
+
+#define OP_31_XOP_MFMSR 83
+#define OP_31_XOP_MTMSR 146
+#define OP_31_XOP_MTMSRD 178
+#define OP_31_XOP_MTSRIN 242
+#define OP_31_XOP_TLBIEL 274
+#define OP_31_XOP_TLBIE 306
+#define OP_31_XOP_SLBMTE 402
+#define OP_31_XOP_SLBIE 434
+#define OP_31_XOP_SLBIA 498
+#define OP_31_XOP_MFSRIN 659
+#define OP_31_XOP_SLBMFEV 851
+#define OP_31_XOP_EIOIO 854
+#define OP_31_XOP_SLBMFEE 915
+
+/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */
+#define OP_31_XOP_DCBZ 1010
+
+int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu,
+ unsigned int inst, int *advance)
+{
+ int emulated = EMULATE_DONE;
+
+ switch (get_op(inst)) {
+ case 19:
+ switch (get_xop(inst)) {
+ case OP_19_XOP_RFID:
+ case OP_19_XOP_RFI:
+ vcpu->arch.pc = vcpu->arch.srr0;
+ kvmppc_set_msr(vcpu, vcpu->arch.srr1);
+ *advance = 0;
+ break;
+
+ default:
+ emulated = EMULATE_FAIL;
+ break;
+ }
+ break;
+ case 31:
+ switch (get_xop(inst)) {
+ case OP_31_XOP_MFMSR:
+ vcpu->arch.gpr[get_rt(inst)] = vcpu->arch.msr;
+ break;
+ case OP_31_XOP_MTMSRD:
+ {
+ ulong rs = vcpu->arch.gpr[get_rs(inst)];
+ if (inst & 0x10000) {
+ vcpu->arch.msr &= ~(MSR_RI | MSR_EE);
+ vcpu->arch.msr |= rs & (MSR_RI | MSR_EE);
+ } else
+ kvmppc_set_msr(vcpu, rs);
+ break;
+ }
+ case OP_31_XOP_MTMSR:
+ kvmppc_set_msr(vcpu, vcpu->arch.gpr[get_rs(inst)]);
+ break;
+ case OP_31_XOP_MFSRIN:
+ {
+ int srnum;
+
+ srnum = (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf;
+ if (vcpu->arch.mmu.mfsrin) {
+ u32 sr;
+ sr = vcpu->arch.mmu.mfsrin(vcpu, srnum);
+ vcpu->arch.gpr[get_rt(inst)] = sr;
+ }
+ break;
+ }
+ case OP_31_XOP_MTSRIN:
+ vcpu->arch.mmu.mtsrin(vcpu,
+ (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf,
+ vcpu->arch.gpr[get_rs(inst)]);
+ break;
+ case OP_31_XOP_TLBIE:
+ case OP_31_XOP_TLBIEL:
+ {
+ bool large = (inst & 0x00200000) ? true : false;
+ ulong addr = vcpu->arch.gpr[get_rb(inst)];
+ vcpu->arch.mmu.tlbie(vcpu, addr, large);
+ break;
+ }
+ case OP_31_XOP_EIOIO:
+ break;
+ case OP_31_XOP_SLBMTE:
+ if (!vcpu->arch.mmu.slbmte)
+ return EMULATE_FAIL;
+
+ vcpu->arch.mmu.slbmte(vcpu, vcpu->arch.gpr[get_rs(inst)],
+ vcpu->arch.gpr[get_rb(inst)]);
+ break;
+ case OP_31_XOP_SLBIE:
+ if (!vcpu->arch.mmu.slbie)
+ return EMULATE_FAIL;
+
+ vcpu->arch.mmu.slbie(vcpu, vcpu->arch.gpr[get_rb(inst)]);
+ break;
+ case OP_31_XOP_SLBIA:
+ if (!vcpu->arch.mmu.slbia)
+ return EMULATE_FAIL;
+
+ vcpu->arch.mmu.slbia(vcpu);
+ break;
+ case OP_31_XOP_SLBMFEE:
+ if (!vcpu->arch.mmu.slbmfee) {
+ emulated = EMULATE_FAIL;
+ } else {
+ ulong t, rb;
+
+ rb = vcpu->arch.gpr[get_rb(inst)];
+ t = vcpu->arch.mmu.slbmfee(vcpu, rb);
+ vcpu->arch.gpr[get_rt(inst)] = t;
+ }
+ break;
+ case OP_31_XOP_SLBMFEV:
+ if (!vcpu->arch.mmu.slbmfev) {
+ emulated = EMULATE_FAIL;
+ } else {
+ ulong t, rb;
+
+ rb = vcpu->arch.gpr[get_rb(inst)];
+ t = vcpu->arch.mmu.slbmfev(vcpu, rb);
+ vcpu->arch.gpr[get_rt(inst)] = t;
+ }
+ break;
+ case OP_31_XOP_DCBZ:
+ {
+ ulong rb = vcpu->arch.gpr[get_rb(inst)];
+ ulong ra = 0;
+ ulong addr;
+ u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+
+ if (get_ra(inst))
+ ra = vcpu->arch.gpr[get_ra(inst)];
+
+ addr = (ra + rb) & ~31ULL;
+ if (!(vcpu->arch.msr & MSR_SF))
+ addr &= 0xffffffff;
+
+ if (kvmppc_st(vcpu, addr, 32, zeros)) {
+ vcpu->arch.dear = addr;
+ vcpu->arch.fault_dear = addr;
+ to_book3s(vcpu)->dsisr = DSISR_PROTFAULT |
+ DSISR_ISSTORE;
+ kvmppc_book3s_queue_irqprio(vcpu,
+ BOOK3S_INTERRUPT_DATA_STORAGE);
+ kvmppc_mmu_pte_flush(vcpu, addr, ~0xFFFULL);
+ }
+
+ break;
+ }
+ default:
+ emulated = EMULATE_FAIL;
+ }
+ break;
+ default:
+ emulated = EMULATE_FAIL;
+ }
+
+ return emulated;
+}
+
+void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper,
+ u32 val)
+{
+ if (upper) {
+ /* Upper BAT */
+ u32 bl = (val >> 2) & 0x7ff;
+ bat->bepi_mask = (~bl << 17);
+ bat->bepi = val & 0xfffe0000;
+ bat->vs = (val & 2) ? 1 : 0;
+ bat->vp = (val & 1) ? 1 : 0;
+ bat->raw = (bat->raw & 0xffffffff00000000ULL) | val;
+ } else {
+ /* Lower BAT */
+ bat->brpn = val & 0xfffe0000;
+ bat->wimg = (val >> 3) & 0xf;
+ bat->pp = val & 3;
+ bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32);
+ }
+}
+
+static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_bat *bat;
+
+ switch (sprn) {
+ case SPRN_IBAT0U ... SPRN_IBAT3L:
+ bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2];
+ break;
+ case SPRN_IBAT4U ... SPRN_IBAT7L:
+ bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT4U) / 2];
+ break;
+ case SPRN_DBAT0U ... SPRN_DBAT3L:
+ bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2];
+ break;
+ case SPRN_DBAT4U ... SPRN_DBAT7L:
+ bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT4U) / 2];
+ break;
+ default:
+ BUG();
+ }
+
+ kvmppc_set_bat(vcpu, bat, !(sprn % 2), val);
+}
+
+int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs)
+{
+ int emulated = EMULATE_DONE;
+
+ switch (sprn) {
+ case SPRN_SDR1:
+ to_book3s(vcpu)->sdr1 = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_DSISR:
+ to_book3s(vcpu)->dsisr = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_DAR:
+ vcpu->arch.dear = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HIOR:
+ to_book3s(vcpu)->hior = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_IBAT0U ... SPRN_IBAT3L:
+ case SPRN_IBAT4U ... SPRN_IBAT7L:
+ case SPRN_DBAT0U ... SPRN_DBAT3L:
+ case SPRN_DBAT4U ... SPRN_DBAT7L:
+ kvmppc_write_bat(vcpu, sprn, (u32)vcpu->arch.gpr[rs]);
+ /* BAT writes happen so rarely that we're ok to flush
+ * everything here */
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ break;
+ case SPRN_HID0:
+ to_book3s(vcpu)->hid[0] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID1:
+ to_book3s(vcpu)->hid[1] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID2:
+ to_book3s(vcpu)->hid[2] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID4:
+ to_book3s(vcpu)->hid[4] = vcpu->arch.gpr[rs];
+ break;
+ case SPRN_HID5:
+ to_book3s(vcpu)->hid[5] = vcpu->arch.gpr[rs];
+ /* guest HID5 set can change is_dcbz32 */
+ if (vcpu->arch.mmu.is_dcbz32(vcpu) &&
+ (mfmsr() & MSR_HV))
+ vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32;
+ break;
+ case SPRN_ICTC:
+ case SPRN_THRM1:
+ case SPRN_THRM2:
+ case SPRN_THRM3:
+ case SPRN_CTRLF:
+ case SPRN_CTRLT:
+ break;
+ default:
+ printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn);
+#ifndef DEBUG_SPR
+ emulated = EMULATE_FAIL;
+#endif
+ break;
+ }
+
+ return emulated;
+}
+
+int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
+{
+ int emulated = EMULATE_DONE;
+
+ switch (sprn) {
+ case SPRN_SDR1:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->sdr1;
+ break;
+ case SPRN_DSISR:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->dsisr;
+ break;
+ case SPRN_DAR:
+ vcpu->arch.gpr[rt] = vcpu->arch.dear;
+ break;
+ case SPRN_HIOR:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hior;
+ break;
+ case SPRN_HID0:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[0];
+ break;
+ case SPRN_HID1:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[1];
+ break;
+ case SPRN_HID2:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[2];
+ break;
+ case SPRN_HID4:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[4];
+ break;
+ case SPRN_HID5:
+ vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[5];
+ break;
+ case SPRN_THRM1:
+ case SPRN_THRM2:
+ case SPRN_THRM3:
+ case SPRN_CTRLF:
+ case SPRN_CTRLT:
+ vcpu->arch.gpr[rt] = 0;
+ break;
+ default:
+ printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn);
+#ifndef DEBUG_SPR
+ emulated = EMULATE_FAIL;
+#endif
+ break;
+ }
+
+ return emulated;
+}
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/module.h>
+#include <asm/kvm_book3s.h>
+
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter);
+EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+#define KVMPPC_HANDLE_EXIT .kvmppc_handle_exit
+#define ULONG_SIZE 8
+#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE))
+
+.macro mfpaca tmp_reg, src_reg, offset, vcpu_reg
+ ld \tmp_reg, (PACA_EXMC+\offset)(r13)
+ std \tmp_reg, VCPU_GPR(\src_reg)(\vcpu_reg)
+.endm
+
+.macro DISABLE_INTERRUPTS
+ mfmsr r0
+ rldicl r0,r0,48,1
+ rotldi r0,r0,16
+ mtmsrd r0,1
+.endm
+
+/*****************************************************************************
+ * *
+ * Guest entry / exit code that is in kernel module memory (highmem) *
+ * *
+ ****************************************************************************/
+
+/* Registers:
+ * r3: kvm_run pointer
+ * r4: vcpu pointer
+ */
+_GLOBAL(__kvmppc_vcpu_entry)
+
+kvm_start_entry:
+ /* Write correct stack frame */
+ mflr r0
+ std r0,16(r1)
+
+ /* Save host state to the stack */
+ stdu r1, -SWITCH_FRAME_SIZE(r1)
+
+ /* Save r3 (kvm_run) and r4 (vcpu) */
+ SAVE_2GPRS(3, r1)
+
+ /* Save non-volatile registers (r14 - r31) */
+ SAVE_NVGPRS(r1)
+
+ /* Save LR */
+ mflr r14
+ std r14, _LINK(r1)
+
+/* XXX optimize non-volatile loading away */
+kvm_start_lightweight:
+
+ DISABLE_INTERRUPTS
+
+ /* Save R1/R2 in the PACA */
+ std r1, PACAR1(r13)
+ std r2, (PACA_EXMC+EX_SRR0)(r13)
+ ld r3, VCPU_HIGHMEM_HANDLER(r4)
+ std r3, PACASAVEDMSR(r13)
+
+ /* Load non-volatile guest state from the vcpu */
+ ld r14, VCPU_GPR(r14)(r4)
+ ld r15, VCPU_GPR(r15)(r4)
+ ld r16, VCPU_GPR(r16)(r4)
+ ld r17, VCPU_GPR(r17)(r4)
+ ld r18, VCPU_GPR(r18)(r4)
+ ld r19, VCPU_GPR(r19)(r4)
+ ld r20, VCPU_GPR(r20)(r4)
+ ld r21, VCPU_GPR(r21)(r4)
+ ld r22, VCPU_GPR(r22)(r4)
+ ld r23, VCPU_GPR(r23)(r4)
+ ld r24, VCPU_GPR(r24)(r4)
+ ld r25, VCPU_GPR(r25)(r4)
+ ld r26, VCPU_GPR(r26)(r4)
+ ld r27, VCPU_GPR(r27)(r4)
+ ld r28, VCPU_GPR(r28)(r4)
+ ld r29, VCPU_GPR(r29)(r4)
+ ld r30, VCPU_GPR(r30)(r4)
+ ld r31, VCPU_GPR(r31)(r4)
+
+ ld r9, VCPU_PC(r4) /* r9 = vcpu->arch.pc */
+ ld r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */
+
+ ld r3, VCPU_TRAMPOLINE_ENTER(r4)
+ mtsrr0 r3
+
+ LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+ mtsrr1 r3
+
+ /* Load guest state in the respective registers */
+ lwz r3, VCPU_CR(r4) /* r3 = vcpu->arch.cr */
+ stw r3, (PACA_EXMC + EX_CCR)(r13)
+
+ ld r3, VCPU_CTR(r4) /* r3 = vcpu->arch.ctr */
+ mtctr r3 /* CTR = r3 */
+
+ ld r3, VCPU_LR(r4) /* r3 = vcpu->arch.lr */
+ mtlr r3 /* LR = r3 */
+
+ ld r3, VCPU_XER(r4) /* r3 = vcpu->arch.xer */
+ std r3, (PACA_EXMC + EX_R3)(r13)
+
+ /* Some guests may need to have dcbz set to 32 byte length.
+ *
+ * Usually we ensure that by patching the guest's instructions
+ * to trap on dcbz and emulate it in the hypervisor.
+ *
+ * If we can, we should tell the CPU to use 32 byte dcbz though,
+ * because that's a lot faster.
+ */
+
+ ld r3, VCPU_HFLAGS(r4)
+ rldicl. r3, r3, 0, 63 /* CR = ((r3 & 1) == 0) */
+ beq no_dcbz32_on
+
+ mfspr r3,SPRN_HID5
+ ori r3, r3, 0x80 /* XXX HID5_dcbz32 = 0x80 */
+ mtspr SPRN_HID5,r3
+
+no_dcbz32_on:
+ /* Load guest GPRs */
+
+ ld r3, VCPU_GPR(r9)(r4)
+ std r3, (PACA_EXMC + EX_R9)(r13)
+ ld r3, VCPU_GPR(r10)(r4)
+ std r3, (PACA_EXMC + EX_R10)(r13)
+ ld r3, VCPU_GPR(r11)(r4)
+ std r3, (PACA_EXMC + EX_R11)(r13)
+ ld r3, VCPU_GPR(r12)(r4)
+ std r3, (PACA_EXMC + EX_R12)(r13)
+ ld r3, VCPU_GPR(r13)(r4)
+ std r3, (PACA_EXMC + EX_R13)(r13)
+
+ ld r0, VCPU_GPR(r0)(r4)
+ ld r1, VCPU_GPR(r1)(r4)
+ ld r2, VCPU_GPR(r2)(r4)
+ ld r3, VCPU_GPR(r3)(r4)
+ ld r5, VCPU_GPR(r5)(r4)
+ ld r6, VCPU_GPR(r6)(r4)
+ ld r7, VCPU_GPR(r7)(r4)
+ ld r8, VCPU_GPR(r8)(r4)
+ ld r4, VCPU_GPR(r4)(r4)
+
+ /* This sets the Magic value for the trampoline */
+
+ li r11, 1
+ stb r11, PACA_KVM_IN_GUEST(r13)
+
+ /* Jump to SLB patching handlder and into our guest */
+ RFI
+
+/*
+ * This is the handler in module memory. It gets jumped at from the
+ * lowmem trampoline code, so it's basically the guest exit code.
+ *
+ */
+
+.global kvmppc_handler_highmem
+kvmppc_handler_highmem:
+
+ /*
+ * Register usage at this point:
+ *
+ * R00 = guest R13
+ * R01 = host R1
+ * R02 = host R2
+ * R10 = guest PC
+ * R11 = guest MSR
+ * R12 = exit handler id
+ * R13 = PACA
+ * PACA.exmc.R9 = guest R1
+ * PACA.exmc.R10 = guest R10
+ * PACA.exmc.R11 = guest R11
+ * PACA.exmc.R12 = guest R12
+ * PACA.exmc.R13 = guest R2
+ * PACA.exmc.DAR = guest DAR
+ * PACA.exmc.DSISR = guest DSISR
+ * PACA.exmc.LR = guest instruction
+ * PACA.exmc.CCR = guest CR
+ * PACA.exmc.SRR0 = guest R0
+ *
+ */
+
+ std r3, (PACA_EXMC+EX_R3)(r13)
+
+ /* save the exit id in R3 */
+ mr r3, r12
+
+ /* R12 = vcpu */
+ ld r12, GPR4(r1)
+
+ /* Now save the guest state */
+
+ std r0, VCPU_GPR(r13)(r12)
+ std r4, VCPU_GPR(r4)(r12)
+ std r5, VCPU_GPR(r5)(r12)
+ std r6, VCPU_GPR(r6)(r12)
+ std r7, VCPU_GPR(r7)(r12)
+ std r8, VCPU_GPR(r8)(r12)
+ std r9, VCPU_GPR(r9)(r12)
+
+ /* get registers from PACA */
+ mfpaca r5, r0, EX_SRR0, r12
+ mfpaca r5, r3, EX_R3, r12
+ mfpaca r5, r1, EX_R9, r12
+ mfpaca r5, r10, EX_R10, r12
+ mfpaca r5, r11, EX_R11, r12
+ mfpaca r5, r12, EX_R12, r12
+ mfpaca r5, r2, EX_R13, r12
+
+ lwz r5, (PACA_EXMC+EX_LR)(r13)
+ stw r5, VCPU_LAST_INST(r12)
+
+ lwz r5, (PACA_EXMC+EX_CCR)(r13)
+ stw r5, VCPU_CR(r12)
+
+ ld r5, VCPU_HFLAGS(r12)
+ rldicl. r5, r5, 0, 63 /* CR = ((r5 & 1) == 0) */
+ beq no_dcbz32_off
+
+ mfspr r5,SPRN_HID5
+ rldimi r5,r5,6,56
+ mtspr SPRN_HID5,r5
+
+no_dcbz32_off:
+
+ /* XXX maybe skip on lightweight? */
+ std r14, VCPU_GPR(r14)(r12)
+ std r15, VCPU_GPR(r15)(r12)
+ std r16, VCPU_GPR(r16)(r12)
+ std r17, VCPU_GPR(r17)(r12)
+ std r18, VCPU_GPR(r18)(r12)
+ std r19, VCPU_GPR(r19)(r12)
+ std r20, VCPU_GPR(r20)(r12)
+ std r21, VCPU_GPR(r21)(r12)
+ std r22, VCPU_GPR(r22)(r12)
+ std r23, VCPU_GPR(r23)(r12)
+ std r24, VCPU_GPR(r24)(r12)
+ std r25, VCPU_GPR(r25)(r12)
+ std r26, VCPU_GPR(r26)(r12)
+ std r27, VCPU_GPR(r27)(r12)
+ std r28, VCPU_GPR(r28)(r12)
+ std r29, VCPU_GPR(r29)(r12)
+ std r30, VCPU_GPR(r30)(r12)
+ std r31, VCPU_GPR(r31)(r12)
+
+ /* Restore non-volatile host registers (r14 - r31) */
+ REST_NVGPRS(r1)
+
+ /* Save guest PC (R10) */
+ std r10, VCPU_PC(r12)
+
+ /* Save guest msr (R11) */
+ std r11, VCPU_SHADOW_MSR(r12)
+
+ /* Save guest CTR (in R12) */
+ mfctr r5
+ std r5, VCPU_CTR(r12)
+
+ /* Save guest LR */
+ mflr r5
+ std r5, VCPU_LR(r12)
+
+ /* Save guest XER */
+ mfxer r5
+ std r5, VCPU_XER(r12)
+
+ /* Save guest DAR */
+ ld r5, (PACA_EXMC+EX_DAR)(r13)
+ std r5, VCPU_FAULT_DEAR(r12)
+
+ /* Save guest DSISR */
+ lwz r5, (PACA_EXMC+EX_DSISR)(r13)
+ std r5, VCPU_FAULT_DSISR(r12)
+
+ /* Restore host msr -> SRR1 */
+ ld r7, VCPU_HOST_MSR(r12)
+ mtsrr1 r7
+
+ /* Restore host IP -> SRR0 */
+ ld r6, VCPU_HOST_RETIP(r12)
+ mtsrr0 r6
+
+ /*
+ * For some interrupts, we need to call the real Linux
+ * handler, so it can do work for us. This has to happen
+ * as if the interrupt arrived from the kernel though,
+ * so let's fake it here where most state is restored.
+ *
+ * Call Linux for hardware interrupts/decrementer
+ * r3 = address of interrupt handler (exit reason)
+ */
+
+ cmpwi r3, BOOK3S_INTERRUPT_EXTERNAL
+ beq call_linux_handler
+ cmpwi r3, BOOK3S_INTERRUPT_DECREMENTER
+ beq call_linux_handler
+
+ /* Back to Interruptable Mode! (goto kvm_return_point) */
+ RFI
+
+call_linux_handler:
+
+ /*
+ * If we land here we need to jump back to the handler we
+ * came from.
+ *
+ * We have a page that we can access from real mode, so let's
+ * jump back to that and use it as a trampoline to get back into the
+ * interrupt handler!
+ *
+ * R3 still contains the exit code,
+ * R6 VCPU_HOST_RETIP and
+ * R7 VCPU_HOST_MSR
+ */
+
+ mtlr r3
+
+ ld r5, VCPU_TRAMPOLINE_LOWMEM(r12)
+ mtsrr0 r5
+ LOAD_REG_IMMEDIATE(r5, MSR_KERNEL & ~(MSR_IR | MSR_DR))
+ mtsrr1 r5
+
+ RFI
+
+.global kvm_return_point
+kvm_return_point:
+
+ /* Jump back to lightweight entry if we're supposed to */
+ /* go back into the guest */
+ mr r5, r3
+ /* Restore r3 (kvm_run) and r4 (vcpu) */
+ REST_2GPRS(3, r1)
+ bl KVMPPC_HANDLE_EXIT
+
+#if 0 /* XXX get lightweight exits back */
+ cmpwi r3, RESUME_GUEST
+ bne kvm_exit_heavyweight
+
+ /* put VCPU and KVM_RUN back into place and roll again! */
+ REST_2GPRS(3, r1)
+ b kvm_start_lightweight
+
+kvm_exit_heavyweight:
+ /* Restore non-volatile host registers */
+ ld r14, _LINK(r1)
+ mtlr r14
+ REST_NVGPRS(r1)
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+#else
+ ld r4, _LINK(r1)
+ mtlr r4
+
+ cmpwi r3, RESUME_GUEST
+ bne kvm_exit_heavyweight
+
+ REST_2GPRS(3, r1)
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+
+ b kvm_start_entry
+
+kvm_exit_heavyweight:
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+#endif
+
+ blr
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kvm.h>
+#include <linux/kvm_host.h>
+#include <linux/highmem.h>
+
+#include <asm/tlbflush.h>
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+
+/* #define DEBUG_MMU */
+
+#ifdef DEBUG_MMU
+#define dprintk(X...) printk(KERN_INFO X)
+#else
+#define dprintk(X...) do { } while(0)
+#endif
+
+static void kvmppc_mmu_book3s_64_reset_msr(struct kvm_vcpu *vcpu)
+{
+ kvmppc_set_msr(vcpu, MSR_SF);
+}
+
+static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe(
+ struct kvmppc_vcpu_book3s *vcpu_book3s,
+ gva_t eaddr)
+{
+ int i;
+ u64 esid = GET_ESID(eaddr);
+ u64 esid_1t = GET_ESID_1T(eaddr);
+
+ for (i = 0; i < vcpu_book3s->slb_nr; i++) {
+ u64 cmp_esid = esid;
+
+ if (!vcpu_book3s->slb[i].valid)
+ continue;
+
+ if (vcpu_book3s->slb[i].large)
+ cmp_esid = esid_1t;
+
+ if (vcpu_book3s->slb[i].esid == cmp_esid)
+ return &vcpu_book3s->slb[i];
+ }
+
+ dprintk("KVM: No SLB entry found for 0x%lx [%llx | %llx]\n",
+ eaddr, esid, esid_1t);
+ for (i = 0; i < vcpu_book3s->slb_nr; i++) {
+ if (vcpu_book3s->slb[i].vsid)
+ dprintk(" %d: %c%c %llx %llx\n", i,
+ vcpu_book3s->slb[i].valid ? 'v' : ' ',
+ vcpu_book3s->slb[i].large ? 'l' : ' ',
+ vcpu_book3s->slb[i].esid,
+ vcpu_book3s->slb[i].vsid);
+ }
+
+ return NULL;
+}
+
+static u64 kvmppc_mmu_book3s_64_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr,
+ bool data)
+{
+ struct kvmppc_slb *slb;
+
+ slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), eaddr);
+ if (!slb)
+ return 0;
+
+ if (slb->large)
+ return (((u64)eaddr >> 12) & 0xfffffff) |
+ (((u64)slb->vsid) << 28);
+
+ return (((u64)eaddr >> 12) & 0xffff) | (((u64)slb->vsid) << 16);
+}
+
+static int kvmppc_mmu_book3s_64_get_pagesize(struct kvmppc_slb *slbe)
+{
+ return slbe->large ? 24 : 12;
+}
+
+static u32 kvmppc_mmu_book3s_64_get_page(struct kvmppc_slb *slbe, gva_t eaddr)
+{
+ int p = kvmppc_mmu_book3s_64_get_pagesize(slbe);
+ return ((eaddr & 0xfffffff) >> p);
+}
+
+static hva_t kvmppc_mmu_book3s_64_get_pteg(
+ struct kvmppc_vcpu_book3s *vcpu_book3s,
+ struct kvmppc_slb *slbe, gva_t eaddr,
+ bool second)
+{
+ u64 hash, pteg, htabsize;
+ u32 page;
+ hva_t r;
+
+ page = kvmppc_mmu_book3s_64_get_page(slbe, eaddr);
+ htabsize = ((1 << ((vcpu_book3s->sdr1 & 0x1f) + 11)) - 1);
+
+ hash = slbe->vsid ^ page;
+ if (second)
+ hash = ~hash;
+ hash &= ((1ULL << 39ULL) - 1ULL);
+ hash &= htabsize;
+ hash <<= 7ULL;
+
+ pteg = vcpu_book3s->sdr1 & 0xfffffffffffc0000ULL;
+ pteg |= hash;
+
+ dprintk("MMU: page=0x%x sdr1=0x%llx pteg=0x%llx vsid=0x%llx\n",
+ page, vcpu_book3s->sdr1, pteg, slbe->vsid);
+
+ r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT);
+ if (kvm_is_error_hva(r))
+ return r;
+ return r | (pteg & ~PAGE_MASK);
+}
+
+static u64 kvmppc_mmu_book3s_64_get_avpn(struct kvmppc_slb *slbe, gva_t eaddr)
+{
+ int p = kvmppc_mmu_book3s_64_get_pagesize(slbe);
+ u64 avpn;
+
+ avpn = kvmppc_mmu_book3s_64_get_page(slbe, eaddr);
+ avpn |= slbe->vsid << (28 - p);
+
+ if (p < 24)
+ avpn >>= ((80 - p) - 56) - 8;
+ else
+ avpn <<= 8;
+
+ return avpn;
+}
+
+static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr,
+ struct kvmppc_pte *gpte, bool data)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+ hva_t ptegp;
+ u64 pteg[16];
+ u64 avpn = 0;
+ int i;
+ u8 key = 0;
+ bool found = false;
+ bool perm_err = false;
+ int second = 0;
+
+ slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, eaddr);
+ if (!slbe)
+ goto no_seg_found;
+
+do_second:
+ ptegp = kvmppc_mmu_book3s_64_get_pteg(vcpu_book3s, slbe, eaddr, second);
+ if (kvm_is_error_hva(ptegp))
+ goto no_page_found;
+
+ avpn = kvmppc_mmu_book3s_64_get_avpn(slbe, eaddr);
+
+ if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) {
+ printk(KERN_ERR "KVM can't copy data from 0x%lx!\n", ptegp);
+ goto no_page_found;
+ }
+
+ if ((vcpu->arch.msr & MSR_PR) && slbe->Kp)
+ key = 4;
+ else if (!(vcpu->arch.msr & MSR_PR) && slbe->Ks)
+ key = 4;
+
+ for (i=0; i<16; i+=2) {
+ u64 v = pteg[i];
+ u64 r = pteg[i+1];
+
+ /* Valid check */
+ if (!(v & HPTE_V_VALID))
+ continue;
+ /* Hash check */
+ if ((v & HPTE_V_SECONDARY) != second)
+ continue;
+
+ /* AVPN compare */
+ if (HPTE_V_AVPN_VAL(avpn) == HPTE_V_AVPN_VAL(v)) {
+ u8 pp = (r & HPTE_R_PP) | key;
+ int eaddr_mask = 0xFFF;
+
+ gpte->eaddr = eaddr;
+ gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu,
+ eaddr,
+ data);
+ if (slbe->large)
+ eaddr_mask = 0xFFFFFF;
+ gpte->raddr = (r & HPTE_R_RPN) | (eaddr & eaddr_mask);
+ gpte->may_execute = ((r & HPTE_R_N) ? false : true);
+ gpte->may_read = false;
+ gpte->may_write = false;
+
+ switch (pp) {
+ case 0:
+ case 1:
+ case 2:
+ case 6:
+ gpte->may_write = true;
+ /* fall through */
+ case 3:
+ case 5:
+ case 7:
+ gpte->may_read = true;
+ break;
+ }
+
+ if (!gpte->may_read) {
+ perm_err = true;
+ continue;
+ }
+
+ dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx "
+ "-> 0x%llx\n",
+ eaddr, avpn, gpte->vpage, gpte->raddr);
+ found = true;
+ break;
+ }
+ }
+
+ /* Update PTE R and C bits, so the guest's swapper knows we used the
+ * page */
+ if (found) {
+ u32 oldr = pteg[i+1];
+
+ if (gpte->may_read) {
+ /* Set the accessed flag */
+ pteg[i+1] |= HPTE_R_R;
+ }
+ if (gpte->may_write) {
+ /* Set the dirty flag */
+ pteg[i+1] |= HPTE_R_C;
+ } else {
+ dprintk("KVM: Mapping read-only page!\n");
+ }
+
+ /* Write back into the PTEG */
+ if (pteg[i+1] != oldr)
+ copy_to_user((void __user *)ptegp, pteg, sizeof(pteg));
+
+ return 0;
+ } else {
+ dprintk("KVM MMU: No PTE found (ea=0x%lx sdr1=0x%llx "
+ "ptegp=0x%lx)\n",
+ eaddr, to_book3s(vcpu)->sdr1, ptegp);
+ for (i = 0; i < 16; i += 2)
+ dprintk(" %02d: 0x%llx - 0x%llx (0x%llx)\n",
+ i, pteg[i], pteg[i+1], avpn);
+
+ if (!second) {
+ second = HPTE_V_SECONDARY;
+ goto do_second;
+ }
+ }
+
+
+no_page_found:
+
+
+ if (perm_err)
+ return -EPERM;
+
+ return -ENOENT;
+
+no_seg_found:
+
+ dprintk("KVM MMU: Trigger segment fault\n");
+ return -EINVAL;
+}
+
+static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s;
+ u64 esid, esid_1t;
+ int slb_nr;
+ struct kvmppc_slb *slbe;
+
+ dprintk("KVM MMU: slbmte(0x%llx, 0x%llx)\n", rs, rb);
+
+ vcpu_book3s = to_book3s(vcpu);
+
+ esid = GET_ESID(rb);
+ esid_1t = GET_ESID_1T(rb);
+ slb_nr = rb & 0xfff;
+
+ if (slb_nr > vcpu_book3s->slb_nr)
+ return;
+
+ slbe = &vcpu_book3s->slb[slb_nr];
+
+ slbe->large = (rs & SLB_VSID_L) ? 1 : 0;
+ slbe->esid = slbe->large ? esid_1t : esid;
+ slbe->vsid = rs >> 12;
+ slbe->valid = (rb & SLB_ESID_V) ? 1 : 0;
+ slbe->Ks = (rs & SLB_VSID_KS) ? 1 : 0;
+ slbe->Kp = (rs & SLB_VSID_KP) ? 1 : 0;
+ slbe->nx = (rs & SLB_VSID_N) ? 1 : 0;
+ slbe->class = (rs & SLB_VSID_C) ? 1 : 0;
+
+ slbe->orige = rb & (ESID_MASK | SLB_ESID_V);
+ slbe->origv = rs;
+
+ /* Map the new segment */
+ kvmppc_mmu_map_segment(vcpu, esid << SID_SHIFT);
+}
+
+static u64 kvmppc_mmu_book3s_64_slbmfee(struct kvm_vcpu *vcpu, u64 slb_nr)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+
+ if (slb_nr > vcpu_book3s->slb_nr)
+ return 0;
+
+ slbe = &vcpu_book3s->slb[slb_nr];
+
+ return slbe->orige;
+}
+
+static u64 kvmppc_mmu_book3s_64_slbmfev(struct kvm_vcpu *vcpu, u64 slb_nr)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+
+ if (slb_nr > vcpu_book3s->slb_nr)
+ return 0;
+
+ slbe = &vcpu_book3s->slb[slb_nr];
+
+ return slbe->origv;
+}
+
+static void kvmppc_mmu_book3s_64_slbie(struct kvm_vcpu *vcpu, u64 ea)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ struct kvmppc_slb *slbe;
+
+ dprintk("KVM MMU: slbie(0x%llx)\n", ea);
+
+ slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, ea);
+
+ if (!slbe)
+ return;
+
+ dprintk("KVM MMU: slbie(0x%llx, 0x%llx)\n", ea, slbe->esid);
+
+ slbe->valid = false;
+
+ kvmppc_mmu_map_segment(vcpu, ea);
+}
+
+static void kvmppc_mmu_book3s_64_slbia(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ int i;
+
+ dprintk("KVM MMU: slbia()\n");
+
+ for (i = 1; i < vcpu_book3s->slb_nr; i++)
+ vcpu_book3s->slb[i].valid = false;
+
+ if (vcpu->arch.msr & MSR_IR) {
+ kvmppc_mmu_flush_segments(vcpu);
+ kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc);
+ }
+}
+
+static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum,
+ ulong value)
+{
+ u64 rb = 0, rs = 0;
+
+ /* ESID = srnum */
+ rb |= (srnum & 0xf) << 28;
+ /* Set the valid bit */
+ rb |= 1 << 27;
+ /* Index = ESID */
+ rb |= srnum;
+
+ /* VSID = VSID */
+ rs |= (value & 0xfffffff) << 12;
+ /* flags = flags */
+ rs |= ((value >> 27) & 0xf) << 9;
+
+ kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb);
+}
+
+static void kvmppc_mmu_book3s_64_tlbie(struct kvm_vcpu *vcpu, ulong va,
+ bool large)
+{
+ u64 mask = 0xFFFFFFFFFULL;
+
+ dprintk("KVM MMU: tlbie(0x%lx)\n", va);
+
+ if (large)
+ mask = 0xFFFFFF000ULL;
+ kvmppc_mmu_pte_vflush(vcpu, va >> 12, mask);
+}
+
+static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid,
+ u64 *vsid)
+{
+ switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) {
+ case 0:
+ *vsid = (VSID_REAL >> 16) | esid;
+ break;
+ case MSR_IR:
+ *vsid = (VSID_REAL_IR >> 16) | esid;
+ break;
+ case MSR_DR:
+ *vsid = (VSID_REAL_DR >> 16) | esid;
+ break;
+ case MSR_DR|MSR_IR:
+ {
+ ulong ea;
+ struct kvmppc_slb *slb;
+ ea = esid << SID_SHIFT;
+ slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea);
+ if (slb)
+ *vsid = slb->vsid;
+ else
+ return -ENOENT;
+
+ break;
+ }
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+static bool kvmppc_mmu_book3s_64_is_dcbz32(struct kvm_vcpu *vcpu)
+{
+ return (to_book3s(vcpu)->hid[5] & 0x80);
+}
+
+void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_mmu *mmu = &vcpu->arch.mmu;
+
+ mmu->mfsrin = NULL;
+ mmu->mtsrin = kvmppc_mmu_book3s_64_mtsrin;
+ mmu->slbmte = kvmppc_mmu_book3s_64_slbmte;
+ mmu->slbmfee = kvmppc_mmu_book3s_64_slbmfee;
+ mmu->slbmfev = kvmppc_mmu_book3s_64_slbmfev;
+ mmu->slbie = kvmppc_mmu_book3s_64_slbie;
+ mmu->slbia = kvmppc_mmu_book3s_64_slbia;
+ mmu->xlate = kvmppc_mmu_book3s_64_xlate;
+ mmu->reset_msr = kvmppc_mmu_book3s_64_reset_msr;
+ mmu->tlbie = kvmppc_mmu_book3s_64_tlbie;
+ mmu->esid_to_vsid = kvmppc_mmu_book3s_64_esid_to_vsid;
+ mmu->ea_to_vp = kvmppc_mmu_book3s_64_ea_to_vp;
+ mmu->is_dcbz32 = kvmppc_mmu_book3s_64_is_dcbz32;
+
+ vcpu->arch.hflags |= BOOK3S_HFLAG_SLB;
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 SUSE Linux Products GmbH. All rights reserved.
+ *
+ * Authors:
+ * Alexander Graf <agraf@suse.de>
+ * Kevin Wolf <mail@kevin-wolf.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kvm_host.h>
+
+#include <asm/kvm_ppc.h>
+#include <asm/kvm_book3s.h>
+#include <asm/mmu-hash64.h>
+#include <asm/machdep.h>
+#include <asm/mmu_context.h>
+#include <asm/hw_irq.h>
+
+#define PTE_SIZE 12
+#define VSID_ALL 0
+
+/* #define DEBUG_MMU */
+/* #define DEBUG_SLB */
+
+#ifdef DEBUG_MMU
+#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_mmu(a, ...) do { } while(0)
+#endif
+
+#ifdef DEBUG_SLB
+#define dprintk_slb(a, ...) printk(KERN_INFO a, __VA_ARGS__)
+#else
+#define dprintk_slb(a, ...) do { } while(0)
+#endif
+
+static void invalidate_pte(struct hpte_cache *pte)
+{
+ dprintk_mmu("KVM: Flushing SPT %d: 0x%llx (0x%llx) -> 0x%llx\n",
+ i, pte->pte.eaddr, pte->pte.vpage, pte->host_va);
+
+ ppc_md.hpte_invalidate(pte->slot, pte->host_va,
+ MMU_PAGE_4K, MMU_SEGSIZE_256M,
+ false);
+ pte->host_va = 0;
+ kvm_release_pfn_dirty(pte->pfn);
+}
+
+void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 guest_ea, u64 ea_mask)
+{
+ int i;
+
+ dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%llx & 0x%llx\n",
+ vcpu->arch.hpte_cache_offset, guest_ea, ea_mask);
+ BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+ guest_ea &= ea_mask;
+ for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if ((pte->pte.eaddr & ea_mask) == guest_ea) {
+ invalidate_pte(pte);
+ }
+ }
+
+ /* Doing a complete flush -> start from scratch */
+ if (!ea_mask)
+ vcpu->arch.hpte_cache_offset = 0;
+}
+
+void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask)
+{
+ int i;
+
+ dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n",
+ vcpu->arch.hpte_cache_offset, guest_vp, vp_mask);
+ BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+ guest_vp &= vp_mask;
+ for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if ((pte->pte.vpage & vp_mask) == guest_vp) {
+ invalidate_pte(pte);
+ }
+ }
+}
+
+void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end)
+{
+ int i;
+
+ dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n",
+ vcpu->arch.hpte_cache_offset, guest_pa, pa_mask);
+ BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM);
+
+ for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if ((pte->pte.raddr >= pa_start) &&
+ (pte->pte.raddr < pa_end)) {
+ invalidate_pte(pte);
+ }
+ }
+}
+
+struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data)
+{
+ int i;
+ u64 guest_vp;
+
+ guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false);
+ for (i=0; i<vcpu->arch.hpte_cache_offset; i++) {
+ struct hpte_cache *pte;
+
+ pte = &vcpu->arch.hpte_cache[i];
+ if (!pte->host_va)
+ continue;
+
+ if (pte->pte.vpage == guest_vp)
+ return &pte->pte;
+ }
+
+ return NULL;
+}
+
+static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu)
+{
+ if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM)
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+
+ return vcpu->arch.hpte_cache_offset++;
+}
+
+/* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using
+ * a hash, so we don't waste cycles on looping */
+static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+ return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^
+ ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK));
+}
+
+
+static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+ struct kvmppc_sid_map *map;
+ u16 sid_map_mask;
+
+ if (vcpu->arch.msr & MSR_PR)
+ gvsid |= VSID_PR;
+
+ sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+ map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+ if (map->guest_vsid == gvsid) {
+ dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+ gvsid, map->host_vsid);
+ return map;
+ }
+
+ map = &to_book3s(vcpu)->sid_map[SID_MAP_MASK - sid_map_mask];
+ if (map->guest_vsid == gvsid) {
+ dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n",
+ gvsid, map->host_vsid);
+ return map;
+ }
+
+ dprintk_slb("SLB: Searching 0x%llx -> not found\n", gvsid);
+ return NULL;
+}
+
+int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte)
+{
+ pfn_t hpaddr;
+ ulong hash, hpteg, va;
+ u64 vsid;
+ int ret;
+ int rflags = 0x192;
+ int vflags = 0;
+ int attempt = 0;
+ struct kvmppc_sid_map *map;
+
+ /* Get host physical address for gpa */
+ hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+ if (kvm_is_error_hva(hpaddr)) {
+ printk(KERN_INFO "Couldn't get guest page for gfn %llx!\n", orig_pte->eaddr);
+ return -EINVAL;
+ }
+ hpaddr <<= PAGE_SHIFT;
+#if PAGE_SHIFT == 12
+#elif PAGE_SHIFT == 16
+ hpaddr |= orig_pte->raddr & 0xf000;
+#else
+#error Unknown page size
+#endif
+
+ /* and write the mapping ea -> hpa into the pt */
+ vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid);
+ map = find_sid_vsid(vcpu, vsid);
+ if (!map) {
+ kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr);
+ map = find_sid_vsid(vcpu, vsid);
+ }
+ BUG_ON(!map);
+
+ vsid = map->host_vsid;
+ va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M);
+
+ if (!orig_pte->may_write)
+ rflags |= HPTE_R_PP;
+ else
+ mark_page_dirty(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT);
+
+ if (!orig_pte->may_execute)
+ rflags |= HPTE_R_N;
+
+ hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M);
+
+map_again:
+ hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+
+ /* In case we tried normal mapping already, let's nuke old entries */
+ if (attempt > 1)
+ if (ppc_md.hpte_remove(hpteg) < 0)
+ return -1;
+
+ ret = ppc_md.hpte_insert(hpteg, va, hpaddr, rflags, vflags, MMU_PAGE_4K, MMU_SEGSIZE_256M);
+
+ if (ret < 0) {
+ /* If we couldn't map a primary PTE, try a secondary */
+#ifdef USE_SECONDARY
+ hash = ~hash;
+ attempt++;
+ if (attempt % 2)
+ vflags = HPTE_V_SECONDARY;
+ else
+ vflags = 0;
+#else
+ attempt = 2;
+#endif
+ goto map_again;
+ } else {
+ int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu);
+ struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id];
+
+ dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%lx (0x%llx) -> %lx\n",
+ ((rflags & HPTE_R_PP) == 3) ? '-' : 'w',
+ (rflags & HPTE_R_N) ? '-' : 'x',
+ orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr);
+
+ pte->slot = hpteg + (ret & 7);
+ pte->host_va = va;
+ pte->pte = *orig_pte;
+ pte->pfn = hpaddr >> PAGE_SHIFT;
+ }
+
+ return 0;
+}
+
+static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
+{
+ struct kvmppc_sid_map *map;
+ struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu);
+ u16 sid_map_mask;
+ static int backwards_map = 0;
+
+ if (vcpu->arch.msr & MSR_PR)
+ gvsid |= VSID_PR;
+
+ /* We might get collisions that trap in preceding order, so let's
+ map them differently */
+
+ sid_map_mask = kvmppc_sid_hash(vcpu, gvsid);
+ if (backwards_map)
+ sid_map_mask = SID_MAP_MASK - sid_map_mask;
+
+ map = &to_book3s(vcpu)->sid_map[sid_map_mask];
+
+ /* Make sure we're taking the other map next time */
+ backwards_map = !backwards_map;
+
+ /* Uh-oh ... out of mappings. Let's flush! */
+ if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) {
+ vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+ memset(vcpu_book3s->sid_map, 0,
+ sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+ kvmppc_mmu_flush_segments(vcpu);
+ }
+ map->host_vsid = vcpu_book3s->vsid_next++;
+
+ map->guest_vsid = gvsid;
+ map->valid = true;
+
+ return map;
+}
+
+static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid)
+{
+ int i;
+ int max_slb_size = 64;
+ int found_inval = -1;
+ int r;
+
+ if (!get_paca()->kvm_slb_max)
+ get_paca()->kvm_slb_max = 1;
+
+ /* Are we overwriting? */
+ for (i = 1; i < get_paca()->kvm_slb_max; i++) {
+ if (!(get_paca()->kvm_slb[i].esid & SLB_ESID_V))
+ found_inval = i;
+ else if ((get_paca()->kvm_slb[i].esid & ESID_MASK) == esid)
+ return i;
+ }
+
+ /* Found a spare entry that was invalidated before */
+ if (found_inval > 0)
+ return found_inval;
+
+ /* No spare invalid entry, so create one */
+
+ if (mmu_slb_size < 64)
+ max_slb_size = mmu_slb_size;
+
+ /* Overflowing -> purge */
+ if ((get_paca()->kvm_slb_max) == max_slb_size)
+ kvmppc_mmu_flush_segments(vcpu);
+
+ r = get_paca()->kvm_slb_max;
+ get_paca()->kvm_slb_max++;
+
+ return r;
+}
+
+int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr)
+{
+ u64 esid = eaddr >> SID_SHIFT;
+ u64 slb_esid = (eaddr & ESID_MASK) | SLB_ESID_V;
+ u64 slb_vsid = SLB_VSID_USER;
+ u64 gvsid;
+ int slb_index;
+ struct kvmppc_sid_map *map;
+
+ slb_index = kvmppc_mmu_next_segment(vcpu, eaddr & ESID_MASK);
+
+ if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) {
+ /* Invalidate an entry */
+ get_paca()->kvm_slb[slb_index].esid = 0;
+ return -ENOENT;
+ }
+
+ map = find_sid_vsid(vcpu, gvsid);
+ if (!map)
+ map = create_sid_map(vcpu, gvsid);
+
+ map->guest_esid = esid;
+
+ slb_vsid |= (map->host_vsid << 12);
+ slb_vsid &= ~SLB_VSID_KP;
+ slb_esid |= slb_index;
+
+ get_paca()->kvm_slb[slb_index].esid = slb_esid;
+ get_paca()->kvm_slb[slb_index].vsid = slb_vsid;
+
+ dprintk_slb("slbmte %#llx, %#llx\n", slb_vsid, slb_esid);
+
+ return 0;
+}
+
+void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu)
+{
+ get_paca()->kvm_slb_max = 1;
+ get_paca()->kvm_slb[0].esid = 0;
+}
+
+void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
+{
+ kvmppc_mmu_pte_flush(vcpu, 0, 0);
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/kvm_asm.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/exception-64s.h>
+
+/*****************************************************************************
+ * *
+ * Real Mode handlers that need to be in low physical memory *
+ * *
+ ****************************************************************************/
+
+
+.macro INTERRUPT_TRAMPOLINE intno
+
+.global kvmppc_trampoline_\intno
+kvmppc_trampoline_\intno:
+
+ mtspr SPRN_SPRG_SCRATCH0, r13 /* Save r13 */
+
+ /*
+ * First thing to do is to find out if we're coming
+ * from a KVM guest or a Linux process.
+ *
+ * To distinguish, we check a magic byte in the PACA
+ */
+ mfspr r13, SPRN_SPRG_PACA /* r13 = PACA */
+ std r12, (PACA_EXMC + EX_R12)(r13)
+ mfcr r12
+ stw r12, (PACA_EXMC + EX_CCR)(r13)
+ lbz r12, PACA_KVM_IN_GUEST(r13)
+ cmpwi r12, 0
+ bne ..kvmppc_handler_hasmagic_\intno
+ /* No KVM guest? Then jump back to the Linux handler! */
+ lwz r12, (PACA_EXMC + EX_CCR)(r13)
+ mtcr r12
+ ld r12, (PACA_EXMC + EX_R12)(r13)
+ mfspr r13, SPRN_SPRG_SCRATCH0 /* r13 = original r13 */
+ b kvmppc_resume_\intno /* Get back original handler */
+
+ /* Now we know we're handling a KVM guest */
+..kvmppc_handler_hasmagic_\intno:
+ /* Unset guest state */
+ li r12, 0
+ stb r12, PACA_KVM_IN_GUEST(r13)
+
+ std r1, (PACA_EXMC+EX_R9)(r13)
+ std r10, (PACA_EXMC+EX_R10)(r13)
+ std r11, (PACA_EXMC+EX_R11)(r13)
+ std r2, (PACA_EXMC+EX_R13)(r13)
+
+ mfsrr0 r10
+ mfsrr1 r11
+
+ /* Restore R1/R2 so we can handle faults */
+ ld r1, PACAR1(r13)
+ ld r2, (PACA_EXMC+EX_SRR0)(r13)
+
+ /* Let's store which interrupt we're handling */
+ li r12, \intno
+
+ /* Jump into the SLB exit code that goes to the highmem handler */
+ b kvmppc_handler_trampoline_exit
+
+.endm
+
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_SYSTEM_RESET
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_MACHINE_CHECK
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_STORAGE
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_SEGMENT
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_STORAGE
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_SEGMENT
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_EXTERNAL
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALIGNMENT
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PROGRAM
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_FP_UNAVAIL
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DECREMENTER
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_SYSCALL
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_TRACE
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PERFMON
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALTIVEC
+INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_VSX
+
+/*
+ * This trampoline brings us back to a real mode handler
+ *
+ * Input Registers:
+ *
+ * R6 = SRR0
+ * R7 = SRR1
+ * LR = real-mode IP
+ *
+ */
+.global kvmppc_handler_lowmem_trampoline
+kvmppc_handler_lowmem_trampoline:
+
+ mtsrr0 r6
+ mtsrr1 r7
+ blr
+kvmppc_handler_lowmem_trampoline_end:
+
+.global kvmppc_trampoline_lowmem
+kvmppc_trampoline_lowmem:
+ .long kvmppc_handler_lowmem_trampoline - _stext
+
+.global kvmppc_trampoline_enter
+kvmppc_trampoline_enter:
+ .long kvmppc_handler_trampoline_enter - _stext
+
+#include "book3s_64_slb.S"
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Copyright SUSE Linux Products GmbH 2009
+ *
+ * Authors: Alexander Graf <agraf@suse.de>
+ */
+
+#define SHADOW_SLB_ESID(num) (SLBSHADOW_SAVEAREA + (num * 0x10))
+#define SHADOW_SLB_VSID(num) (SLBSHADOW_SAVEAREA + (num * 0x10) + 0x8)
+#define UNBOLT_SLB_ENTRY(num) \
+ ld r9, SHADOW_SLB_ESID(num)(r12); \
+ /* Invalid? Skip. */; \
+ rldicl. r0, r9, 37, 63; \
+ beq slb_entry_skip_ ## num; \
+ xoris r9, r9, SLB_ESID_V@h; \
+ std r9, SHADOW_SLB_ESID(num)(r12); \
+ slb_entry_skip_ ## num:
+
+#define REBOLT_SLB_ENTRY(num) \
+ ld r10, SHADOW_SLB_ESID(num)(r11); \
+ cmpdi r10, 0; \
+ beq slb_exit_skip_1; \
+ oris r10, r10, SLB_ESID_V@h; \
+ ld r9, SHADOW_SLB_VSID(num)(r11); \
+ slbmte r9, r10; \
+ std r10, SHADOW_SLB_ESID(num)(r11); \
+slb_exit_skip_ ## num:
+
+/******************************************************************************
+ * *
+ * Entry code *
+ * *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_enter
+kvmppc_handler_trampoline_enter:
+
+ /* Required state:
+ *
+ * MSR = ~IR|DR
+ * R13 = PACA
+ * R9 = guest IP
+ * R10 = guest MSR
+ * R11 = free
+ * R12 = free
+ * PACA[PACA_EXMC + EX_R9] = guest R9
+ * PACA[PACA_EXMC + EX_R10] = guest R10
+ * PACA[PACA_EXMC + EX_R11] = guest R11
+ * PACA[PACA_EXMC + EX_R12] = guest R12
+ * PACA[PACA_EXMC + EX_R13] = guest R13
+ * PACA[PACA_EXMC + EX_CCR] = guest CR
+ * PACA[PACA_EXMC + EX_R3] = guest XER
+ */
+
+ mtsrr0 r9
+ mtsrr1 r10
+
+ mtspr SPRN_SPRG_SCRATCH0, r0
+
+ /* Remove LPAR shadow entries */
+
+#if SLB_NUM_BOLTED == 3
+
+ ld r12, PACA_SLBSHADOWPTR(r13)
+
+ /* Save off the first entry so we can slbie it later */
+ ld r10, SHADOW_SLB_ESID(0)(r12)
+ ld r11, SHADOW_SLB_VSID(0)(r12)
+
+ /* Remove bolted entries */
+ UNBOLT_SLB_ENTRY(0)
+ UNBOLT_SLB_ENTRY(1)
+ UNBOLT_SLB_ENTRY(2)
+
+#else
+#error unknown number of bolted entries
+#endif
+
+ /* Flush SLB */
+
+ slbia
+
+ /* r0 = esid & ESID_MASK */
+ rldicr r10, r10, 0, 35
+ /* r0 |= CLASS_BIT(VSID) */
+ rldic r12, r11, 56 - 36, 36
+ or r10, r10, r12
+ slbie r10
+
+ isync
+
+ /* Fill SLB with our shadow */
+
+ lbz r12, PACA_KVM_SLB_MAX(r13)
+ mulli r12, r12, 16
+ addi r12, r12, PACA_KVM_SLB
+ add r12, r12, r13
+
+ /* for (r11 = kvm_slb; r11 < kvm_slb + kvm_slb_size; r11+=slb_entry) */
+ li r11, PACA_KVM_SLB
+ add r11, r11, r13
+
+slb_loop_enter:
+
+ ld r10, 0(r11)
+
+ rldicl. r0, r10, 37, 63
+ beq slb_loop_enter_skip
+
+ ld r9, 8(r11)
+ slbmte r9, r10
+
+slb_loop_enter_skip:
+ addi r11, r11, 16
+ cmpd cr0, r11, r12
+ blt slb_loop_enter
+
+slb_do_enter:
+
+ /* Enter guest */
+
+ mfspr r0, SPRN_SPRG_SCRATCH0
+
+ ld r9, (PACA_EXMC+EX_R9)(r13)
+ ld r10, (PACA_EXMC+EX_R10)(r13)
+ ld r12, (PACA_EXMC+EX_R12)(r13)
+
+ lwz r11, (PACA_EXMC+EX_CCR)(r13)
+ mtcr r11
+
+ ld r11, (PACA_EXMC+EX_R3)(r13)
+ mtxer r11
+
+ ld r11, (PACA_EXMC+EX_R11)(r13)
+ ld r13, (PACA_EXMC+EX_R13)(r13)
+
+ RFI
+kvmppc_handler_trampoline_enter_end:
+
+
+
+/******************************************************************************
+ * *
+ * Exit code *
+ * *
+ *****************************************************************************/
+
+.global kvmppc_handler_trampoline_exit
+kvmppc_handler_trampoline_exit:
+
+ /* Register usage at this point:
+ *
+ * SPRG_SCRATCH0 = guest R13
+ * R01 = host R1
+ * R02 = host R2
+ * R10 = guest PC
+ * R11 = guest MSR
+ * R12 = exit handler id
+ * R13 = PACA
+ * PACA.exmc.CCR = guest CR
+ * PACA.exmc.R9 = guest R1
+ * PACA.exmc.R10 = guest R10
+ * PACA.exmc.R11 = guest R11
+ * PACA.exmc.R12 = guest R12
+ * PACA.exmc.R13 = guest R2
+ *
+ */
+
+ /* Save registers */
+
+ std r0, (PACA_EXMC+EX_SRR0)(r13)
+ std r9, (PACA_EXMC+EX_R3)(r13)
+ std r10, (PACA_EXMC+EX_LR)(r13)
+ std r11, (PACA_EXMC+EX_DAR)(r13)
+
+ /*
+ * In order for us to easily get the last instruction,
+ * we got the #vmexit at, we exploit the fact that the
+ * virtual layout is still the same here, so we can just
+ * ld from the guest's PC address
+ */
+
+ /* We only load the last instruction when it's safe */
+ cmpwi r12, BOOK3S_INTERRUPT_DATA_STORAGE
+ beq ld_last_inst
+ cmpwi r12, BOOK3S_INTERRUPT_PROGRAM
+ beq ld_last_inst
+
+ b no_ld_last_inst
+
+ld_last_inst:
+ /* Save off the guest instruction we're at */
+ /* 1) enable paging for data */
+ mfmsr r9
+ ori r11, r9, MSR_DR /* Enable paging for data */
+ mtmsr r11
+ /* 2) fetch the instruction */
+ lwz r0, 0(r10)
+ /* 3) disable paging again */
+ mtmsr r9
+
+no_ld_last_inst:
+
+ /* Restore bolted entries from the shadow and fix it along the way */
+
+ /* We don't store anything in entry 0, so we don't need to take care of it */
+ slbia
+ isync
+
+#if SLB_NUM_BOLTED == 3
+
+ ld r11, PACA_SLBSHADOWPTR(r13)
+
+ REBOLT_SLB_ENTRY(0)
+ REBOLT_SLB_ENTRY(1)
+ REBOLT_SLB_ENTRY(2)
+
+#else
+#error unknown number of bolted entries
+#endif
+
+slb_do_exit:
+
+ /* Restore registers */
+
+ ld r11, (PACA_EXMC+EX_DAR)(r13)
+ ld r10, (PACA_EXMC+EX_LR)(r13)
+ ld r9, (PACA_EXMC+EX_R3)(r13)
+
+ /* Save last inst */
+ stw r0, (PACA_EXMC+EX_LR)(r13)
+
+ /* Save DAR and DSISR before going to paged mode */
+ mfdar r0
+ std r0, (PACA_EXMC+EX_DAR)(r13)
+ mfdsisr r0
+ stw r0, (PACA_EXMC+EX_DSISR)(r13)
+
+ /* RFI into the highmem handler */
+ mfmsr r0
+ ori r0, r0, MSR_IR|MSR_DR|MSR_RI /* Enable paging */
+ mtsrr1 r0
+ ld r0, PACASAVEDMSR(r13) /* Highmem handler address */
+ mtsrr0 r0
+
+ mfspr r0, SPRN_SPRG_SCRATCH0
+
+ RFI
+kvmppc_handler_trampoline_exit_end:
+
return kvmppc_core_vcpu_translate(vcpu, tr);
}
+int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
+{
+ return -ENOTSUPP;
+}
+
int __init kvmppc_booke_init(void)
{
unsigned long ivor[16];
*/
#include <linux/jiffies.h>
-#include <linux/timer.h>
+#include <linux/hrtimer.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kvm_host.h>
#include "trace.h"
#define OP_TRAP 3
+#define OP_TRAP_64 2
#define OP_31_XOP_LWZX 23
#define OP_31_XOP_LBZX 87
#define OP_STH 44
#define OP_STHU 45
+#ifdef CONFIG_PPC64
+static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
+{
+ return 1;
+}
+#else
+static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.tcr & TCR_DIE;
+}
+#endif
+
void kvmppc_emulate_dec(struct kvm_vcpu *vcpu)
{
- if (vcpu->arch.tcr & TCR_DIE) {
+ unsigned long dec_nsec;
+
+ pr_debug("mtDEC: %x\n", vcpu->arch.dec);
+#ifdef CONFIG_PPC64
+ /* POWER4+ triggers a dec interrupt if the value is < 0 */
+ if (vcpu->arch.dec & 0x80000000) {
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ kvmppc_core_queue_dec(vcpu);
+ return;
+ }
+#endif
+ if (kvmppc_dec_enabled(vcpu)) {
/* The decrementer ticks at the same rate as the timebase, so
* that's how we convert the guest DEC value to the number of
* host ticks. */
- unsigned long nr_jiffies;
- nr_jiffies = vcpu->arch.dec / tb_ticks_per_jiffy;
- mod_timer(&vcpu->arch.dec_timer,
- get_jiffies_64() + nr_jiffies);
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
+ dec_nsec = vcpu->arch.dec;
+ dec_nsec *= 1000;
+ dec_nsec /= tb_ticks_per_usec;
+ hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec),
+ HRTIMER_MODE_REL);
+ vcpu->arch.dec_jiffies = get_tb();
} else {
- del_timer(&vcpu->arch.dec_timer);
+ hrtimer_try_to_cancel(&vcpu->arch.dec_timer);
}
}
/* this default type might be overwritten by subcategories */
kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS);
+ pr_debug(KERN_INFO "Emulating opcode %d / %d\n", get_op(inst), get_xop(inst));
+
switch (get_op(inst)) {
case OP_TRAP:
+#ifdef CONFIG_PPC64
+ case OP_TRAP_64:
+#else
vcpu->arch.esr |= ESR_PTR;
+#endif
kvmppc_core_queue_program(vcpu);
advance = 0;
break;
case SPRN_SRR1:
vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
case SPRN_PVR:
- vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
+ vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
case SPRN_PIR:
- vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break;
+ vcpu->arch.gpr[rt] = vcpu->vcpu_id; break;
+ case SPRN_MSSSR0:
+ vcpu->arch.gpr[rt] = 0; break;
/* Note: mftb and TBRL/TBWL are user-accessible, so
* the guest can always access the real TB anyways.
* In fact, we probably will never see these traps. */
case SPRN_TBWL:
- vcpu->arch.gpr[rt] = mftbl(); break;
+ vcpu->arch.gpr[rt] = get_tb() >> 32; break;
case SPRN_TBWU:
- vcpu->arch.gpr[rt] = mftbu(); break;
+ vcpu->arch.gpr[rt] = get_tb(); break;
case SPRN_SPRG0:
vcpu->arch.gpr[rt] = vcpu->arch.sprg0; break;
/* Note: SPRG4-7 are user-readable, so we don't get
* a trap. */
+ case SPRN_DEC:
+ {
+ u64 jd = get_tb() - vcpu->arch.dec_jiffies;
+ vcpu->arch.gpr[rt] = vcpu->arch.dec - jd;
+ pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n", vcpu->arch.dec, jd, vcpu->arch.gpr[rt]);
+ break;
+ }
default:
emulated = kvmppc_core_emulate_mfspr(vcpu, sprn, rt);
if (emulated == EMULATE_FAIL) {
case SPRN_TBWL: break;
case SPRN_TBWU: break;
+ case SPRN_MSSSR0: break;
+
case SPRN_DEC:
vcpu->arch.dec = vcpu->arch.gpr[rs];
kvmppc_emulate_dec(vcpu);
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
+#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <asm/cputable.h>
#include <asm/uaccess.h>
int r;
switch (ext) {
+ case KVM_CAP_PPC_SEGSTATE:
+ r = 1;
+ break;
case KVM_CAP_COALESCED_MMIO:
r = KVM_COALESCED_MMIO_PAGE_OFFSET;
break;
}
}
+/*
+ * low level hrtimer wake routine. Because this runs in hardirq context
+ * we schedule a tasklet to do the real work.
+ */
+enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer)
+{
+ struct kvm_vcpu *vcpu;
+
+ vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer);
+ tasklet_schedule(&vcpu->arch.tasklet);
+
+ return HRTIMER_NORESTART;
+}
+
int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
{
- setup_timer(&vcpu->arch.dec_timer, kvmppc_decrementer_func,
- (unsigned long)vcpu);
+ hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ tasklet_init(&vcpu->arch.tasklet, kvmppc_decrementer_func, (ulong)vcpu);
+ vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup;
return 0;
}
return r;
}
-int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log)
-{
- return -ENOTSUPP;
-}
-
long kvm_arch_vm_ioctl(struct file *filp,
unsigned int ioctl, unsigned long arg)
{
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
+#include <linux/module.h>
#include <asm/time.h>
#include <asm-generic/div64.h>
static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
{
/* type has to be known at build time for optimization */
+
+ /* The BUILD_BUG_ON below breaks in funny ways, commented out
+ * for now ... -BenH
BUILD_BUG_ON(__builtin_constant_p(type));
+ */
switch (type) {
case EXT_INTR_EXITS:
vcpu->stat.ext_intr_exits++;
* Tracepoint for guest mode entry.
*/
TRACE_EVENT(kvm_ppc_instr,
- TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate),
- TP_ARGS(inst, pc, emulate),
+ TP_PROTO(unsigned int inst, unsigned long _pc, unsigned int emulate),
+ TP_ARGS(inst, _pc, emulate),
TP_STRUCT__entry(
__field( unsigned int, inst )
TP_fast_assign(
__entry->inst = inst;
- __entry->pc = pc;
+ __entry->pc = _pc;
__entry->emulate = emulate;
),
obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+ifeq ($(CONFIG_HUGETLB_PAGE),y)
+obj-y += hugetlbpage.o
+obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o
+endif
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
obj-$(CONFIG_HIGHMEM) += highmem.o
#include "mmu_decl.h"
-extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
-static unsigned long cam[CONFIG_LOWMEM_CAM_NUM];
-#define NUM_TLBCAMS (16)
+#define NUM_TLBCAMS (64)
#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS"
#endif
-struct tlbcam TLBCAM[NUM_TLBCAMS];
+struct tlbcam {
+ u32 MAS0;
+ u32 MAS1;
+ unsigned long MAS2;
+ u32 MAS3;
+ u32 MAS7;
+} TLBCAM[NUM_TLBCAMS];
struct tlbcamrange {
- unsigned long start;
+ unsigned long start;
unsigned long limit;
phys_addr_t phys;
} tlbcam_addrs[NUM_TLBCAMS];
extern unsigned int tlbcam_index;
+unsigned long tlbcam_sz(int idx)
+{
+ return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1;
+}
+
/*
* Return PA for this VA if it is mapped by a CAM, or 0
*/
int b;
for (b = 0; b < tlbcam_index; ++b)
if (pa >= tlbcam_addrs[b].phys
- && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+ && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start)
+tlbcam_addrs[b].phys)
return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys);
return 0;
}
+void loadcam_entry(int idx)
+{
+ mtspr(SPRN_MAS0, TLBCAM[idx].MAS0);
+ mtspr(SPRN_MAS1, TLBCAM[idx].MAS1);
+ mtspr(SPRN_MAS2, TLBCAM[idx].MAS2);
+ mtspr(SPRN_MAS3, TLBCAM[idx].MAS3);
+
+ if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ mtspr(SPRN_MAS7, TLBCAM[idx].MAS7);
+
+ asm volatile("isync;tlbwe;isync" : : : "memory");
+}
+
/*
* Set up one of the I/D BAT (block address translation) register pairs.
* The parameters are not checked; in particular size must be a power
* of 4 between 4k and 256M.
*/
-void settlbcam(int index, unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags, unsigned int pid)
+static void settlbcam(int index, unsigned long virt, phys_addr_t phys,
+ unsigned long size, unsigned long flags, unsigned int pid)
{
unsigned int tsize, lz;
- asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size));
+ asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size));
tsize = 21 - lz;
#ifdef CONFIG_SMP
TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0;
TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0;
- TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR;
+ TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR;
TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0);
+ if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS)
+ TLBCAM[index].MAS7 = (u64)phys >> 32;
#ifndef CONFIG_KGDB /* want user access for breakpoints */
if (flags & _PAGE_USER) {
loadcam_entry(index);
}
-void invalidate_tlbcam_entry(int index)
-{
- TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index);
- TLBCAM[index].MAS1 = ~MAS1_VALID;
-
- loadcam_entry(index);
-}
-
-unsigned long __init mmu_mapin_ram(void)
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
{
+ int i;
unsigned long virt = PAGE_OFFSET;
phys_addr_t phys = memstart_addr;
+ unsigned long amount_mapped = 0;
+ unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
+
+ /* Convert (4^max) kB to (2^max) bytes */
+ max_cam = max_cam * 2 + 10;
- while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
- settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
- virt += cam[tlbcam_index];
- phys += cam[tlbcam_index];
- tlbcam_index++;
+ /* Calculate CAM values */
+ for (i = 0; ram && i < max_cam_idx; i++) {
+ unsigned int camsize = __ilog2(ram) & ~1U;
+ unsigned int align = __ffs(virt | phys) & ~1U;
+ unsigned long cam_sz;
+
+ if (camsize > align)
+ camsize = align;
+ if (camsize > max_cam)
+ camsize = max_cam;
+
+ cam_sz = 1UL << camsize;
+ settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0);
+
+ ram -= cam_sz;
+ amount_mapped += cam_sz;
+ virt += cam_sz;
+ phys += cam_sz;
}
+ tlbcam_index = i;
+
+ return amount_mapped;
+}
- return virt - PAGE_OFFSET;
+unsigned long __init mmu_mapin_ram(void)
+{
+ return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
}
/*
flush_instruction_cache();
}
-void __init
-adjust_total_lowmem(void)
+void __init adjust_total_lowmem(void)
{
- phys_addr_t ram;
- unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff;
- char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf;
+ unsigned long ram;
int i;
- unsigned long virt = PAGE_OFFSET & 0xffffffffUL;
- unsigned long phys = memstart_addr & 0xffffffffUL;
-
- /* Convert (4^max) kB to (2^max) bytes */
- max_cam = max_cam * 2 + 10;
/* adjust lowmem size to __max_low_memory */
ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
- /* Calculate CAM values */
- __max_low_memory = 0;
- for (i = 0; ram && i < ARRAY_SIZE(cam); i++) {
- unsigned int camsize = __ilog2(ram) & ~1U;
- unsigned int align = __ffs(virt | phys) & ~1U;
+ __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
- if (camsize > align)
- camsize = align;
- if (camsize > max_cam)
- camsize = max_cam;
-
- cam[i] = 1UL << camsize;
- ram -= cam[i];
- __max_low_memory += cam[i];
- virt += cam[i];
- phys += cam[i];
-
- p += sprintf(p, "%lu/", cam[i] >> 20);
- }
- for (; i < ARRAY_SIZE(cam); i++)
- p += sprintf(p, "0/");
- p[-1] = '\0';
-
- pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf,
+ pr_info("Memory CAM mapping: ");
+ for (i = 0; i < tlbcam_index - 1; i++)
+ pr_cont("%lu/", tlbcam_sz(i) >> 20);
+ pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20,
(unsigned int)((total_lowmem - __max_low_memory) >> 20));
+
__initial_memory_limit_addr = memstart_addr + __max_low_memory;
}
return 1;
}
-#ifdef CONFIG_HUGETLB_PAGE
-static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
- unsigned long *addr, unsigned long end,
- int write, struct page **pages, int *nr)
-{
- unsigned long mask;
- unsigned long pte_end;
- struct page *head, *page;
- pte_t pte;
- int refs;
-
- pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
- if (pte_end < end)
- end = pte_end;
-
- pte = *ptep;
- mask = _PAGE_PRESENT|_PAGE_USER;
- if (write)
- mask |= _PAGE_RW;
- if ((pte_val(pte) & mask) != mask)
- return 0;
- /* hugepages are never "special" */
- VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
-
- refs = 0;
- head = pte_page(pte);
- page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
- do {
- VM_BUG_ON(compound_head(page) != head);
- pages[*nr] = page;
- (*nr)++;
- page++;
- refs++;
- } while (*addr += PAGE_SIZE, *addr != end);
-
- if (!page_cache_add_speculative(head, refs)) {
- *nr -= refs;
- return 0;
- }
- if (unlikely(pte_val(pte) != pte_val(*ptep))) {
- /* Could be optimized better */
- while (*nr) {
- put_page(page);
- (*nr)--;
- }
- }
-
- return 1;
-}
-#endif /* CONFIG_HUGETLB_PAGE */
-
static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
int write, struct page **pages, int *nr)
{
next = pmd_addr_end(addr, end);
if (pmd_none(pmd))
return 0;
- if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+ if (is_hugepd(pmdp)) {
+ if (!gup_hugepd((hugepd_t *)pmdp, PMD_SHIFT,
+ addr, next, write, pages, nr))
+ return 0;
+ } else if (!gup_pte_range(pmd, addr, next, write, pages, nr))
return 0;
} while (pmdp++, addr = next, addr != end);
next = pud_addr_end(addr, end);
if (pud_none(pud))
return 0;
- if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+ if (is_hugepd(pudp)) {
+ if (!gup_hugepd((hugepd_t *)pudp, PUD_SHIFT,
+ addr, next, write, pages, nr))
+ return 0;
+ } else if (!gup_pmd_range(pud, addr, next, write, pages, nr))
return 0;
} while (pudp++, addr = next, addr != end);
unsigned long next;
pgd_t *pgdp;
int nr = 0;
-#ifdef CONFIG_PPC64
- unsigned int shift;
- int psize;
-#endif
pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
pr_devel(" aligned: %lx .. %lx\n", start, end);
-#ifdef CONFIG_HUGETLB_PAGE
- /* We bail out on slice boundary crossing when hugetlb is
- * enabled in order to not have to deal with two different
- * page table formats
- */
- if (addr < SLICE_LOW_TOP) {
- if (end > SLICE_LOW_TOP)
- goto slow_irqon;
-
- if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
- GET_LOW_SLICE_INDEX(end - 1)))
- goto slow_irqon;
- } else {
- if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
- GET_HIGH_SLICE_INDEX(end - 1)))
- goto slow_irqon;
- }
-#endif /* CONFIG_HUGETLB_PAGE */
-
/*
* XXX: batch / limit 'nr', to avoid large irq off latency
* needs some instrumenting to determine the common sizes used by
*/
local_irq_disable();
-#ifdef CONFIG_PPC64
- /* Those bits are related to hugetlbfs implementation and only exist
- * on 64-bit for now
- */
- psize = get_slice_psize(mm, addr);
- shift = mmu_psize_defs[psize].shift;
-#endif /* CONFIG_PPC64 */
-
-#ifdef CONFIG_HUGETLB_PAGE
- if (unlikely(mmu_huge_psizes[psize])) {
- pte_t *ptep;
- unsigned long a = addr;
- unsigned long sz = ((1UL) << shift);
- struct hstate *hstate = size_to_hstate(sz);
-
- BUG_ON(!hstate);
- /*
- * XXX: could be optimized to avoid hstate
- * lookup entirely (just use shift)
- */
-
- do {
- VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
- ptep = huge_pte_offset(mm, a);
- pr_devel(" %016lx: huge ptep %p\n", a, ptep);
- if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
- &nr))
- goto slow;
- } while (a != end);
- } else
-#endif /* CONFIG_HUGETLB_PAGE */
- {
- pgdp = pgd_offset(mm, addr);
- do {
- pgd_t pgd = *pgdp;
-
-#ifdef CONFIG_PPC64
- VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
-#endif
- pr_devel(" %016lx: normal pgd %p\n", addr,
- (void *)pgd_val(pgd));
- next = pgd_addr_end(addr, end);
- if (pgd_none(pgd))
- goto slow;
- if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ pgdp = pgd_offset(mm, addr);
+ do {
+ pgd_t pgd = *pgdp;
+
+ pr_devel(" %016lx: normal pgd %p\n", addr,
+ (void *)pgd_val(pgd));
+ next = pgd_addr_end(addr, end);
+ if (pgd_none(pgd))
+ goto slow;
+ if (is_hugepd(pgdp)) {
+ if (!gup_hugepd((hugepd_t *)pgdp, PGDIR_SHIFT,
+ addr, next, write, pages, &nr))
goto slow;
- } while (pgdp++, addr = next, addr != end);
- }
+ } else if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ goto slow;
+ } while (pgdp++, addr = next, addr != end);
+
local_irq_enable();
VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
struct hash_pte *htab_address;
unsigned long htab_size_bytes;
unsigned long htab_hash_mask;
+EXPORT_SYMBOL_GPL(htab_hash_mask);
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
int mmu_vmalloc_psize = MMU_PAGE_4K;
int mmu_kernel_ssize = MMU_SEGSIZE_256M;
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
u16 mmu_slb_size = 64;
+EXPORT_SYMBOL_GPL(mmu_slb_size);
#ifdef CONFIG_HUGETLB_PAGE
unsigned int HPAGE_SHIFT;
#endif
#ifdef CONFIG_HUGETLB_PAGE
/* Reserve 16G huge page memory sections for huge pages */
of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
-
-/* Set default large page size. Currently, we pick 16M or 1M depending
- * on what is available
- */
- if (mmu_psize_defs[MMU_PAGE_16M].shift)
- HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
- /* With 4k/4level pagetables, we can't (for now) cope with a
- * huge page size < PMD_SIZE */
- else if (mmu_psize_defs[MMU_PAGE_1M].shift)
- HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
#endif /* CONFIG_HUGETLB_PAGE */
}
/* page is dirty */
if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
if (trap == 0x400) {
- __flush_dcache_icache(page_address(page));
+ flush_dcache_icache_page(page);
set_bit(PG_arch_1, &page->flags);
} else
pp |= HPTE_R_N;
* Result is 0: full permissions, _PAGE_RW: read-only,
* _PAGE_USER or _PAGE_USER|_PAGE_RW: no access.
*/
-static int subpage_protection(pgd_t *pgdir, unsigned long ea)
+static int subpage_protection(struct mm_struct *mm, unsigned long ea)
{
- struct subpage_prot_table *spt = pgd_subpage_prot(pgdir);
+ struct subpage_prot_table *spt = &mm->context.spt;
u32 spp = 0;
u32 **sbpm, *sbpp;
}
#else /* CONFIG_PPC_SUBPAGE_PROT */
-static inline int subpage_protection(pgd_t *pgdir, unsigned long ea)
+static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
{
return 0;
}
unsigned long vsid;
struct mm_struct *mm;
pte_t *ptep;
+ unsigned hugeshift;
const struct cpumask *tmp;
int rc, user_region = 0, local = 0;
int psize, ssize;
if (user_region && cpumask_equal(mm_cpumask(mm), tmp))
local = 1;
-#ifdef CONFIG_HUGETLB_PAGE
- /* Handle hugepage regions */
- if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
- DBG_LOW(" -> huge page !\n");
- return hash_huge_page(mm, access, ea, vsid, local, trap);
- }
-#endif /* CONFIG_HUGETLB_PAGE */
-
#ifndef CONFIG_PPC_64K_PAGES
- /* If we use 4K pages and our psize is not 4K, then we are hitting
- * a special driver mapping, we need to align the address before
- * we fetch the PTE
+ /* If we use 4K pages and our psize is not 4K, then we might
+ * be hitting a special driver mapping, and need to align the
+ * address before we fetch the PTE.
+ *
+ * It could also be a hugepage mapping, in which case this is
+ * not necessary, but it's not harmful, either.
*/
if (psize != MMU_PAGE_4K)
ea &= ~((1ul << mmu_psize_defs[psize].shift) - 1);
#endif /* CONFIG_PPC_64K_PAGES */
/* Get PTE and page size from page tables */
- ptep = find_linux_pte(pgdir, ea);
+ ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugeshift);
if (ptep == NULL || !pte_present(*ptep)) {
DBG_LOW(" no PTE !\n");
return 1;
}
+#ifdef CONFIG_HUGETLB_PAGE
+ if (hugeshift)
+ return __hash_page_huge(ea, access, vsid, ptep, trap, local,
+ ssize, hugeshift, psize);
+#endif /* CONFIG_HUGETLB_PAGE */
+
#ifndef CONFIG_PPC_64K_PAGES
DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep));
#else
--- /dev/null
+/*
+ * PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later)
+ *
+ * Copyright (C) 2003 David Gibson, IBM Corporation.
+ *
+ * Based on the IA-32 version:
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/machdep.h>
+
+int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
+ pte_t *ptep, unsigned long trap, int local, int ssize,
+ unsigned int shift, unsigned int mmu_psize)
+{
+ unsigned long old_pte, new_pte;
+ unsigned long va, rflags, pa, sz;
+ long slot;
+ int err = 1;
+
+ BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
+
+ /* Search the Linux page table for a match with va */
+ va = hpt_va(ea, vsid, ssize);
+
+ /*
+ * Check the user's access rights to the page. If access should be
+ * prevented then send the problem up to do_page_fault.
+ */
+ if (unlikely(access & ~pte_val(*ptep)))
+ goto out;
+ /*
+ * At this point, we have a pte (old_pte) which can be used to build
+ * or update an HPTE. There are 2 cases:
+ *
+ * 1. There is a valid (present) pte with no associated HPTE (this is
+ * the most common case)
+ * 2. There is a valid (present) pte with an associated HPTE. The
+ * current values of the pp bits in the HPTE prevent access
+ * because we are doing software DIRTY bit management and the
+ * page is currently not DIRTY.
+ */
+
+
+ do {
+ old_pte = pte_val(*ptep);
+ if (old_pte & _PAGE_BUSY)
+ goto out;
+ new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+ } while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
+ old_pte, new_pte));
+
+ rflags = 0x2 | (!(new_pte & _PAGE_RW));
+ /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
+ rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+ sz = ((1UL) << shift);
+ if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+ /* No CPU has hugepages but lacks no execute, so we
+ * don't need to worry about that case */
+ rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
+
+ /* Check if pte already has an hpte (case 2) */
+ if (unlikely(old_pte & _PAGE_HASHPTE)) {
+ /* There MIGHT be an HPTE for this pte */
+ unsigned long hash, slot;
+
+ hash = hpt_hash(va, shift, ssize);
+ if (old_pte & _PAGE_F_SECOND)
+ hash = ~hash;
+ slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
+ slot += (old_pte & _PAGE_F_GIX) >> 12;
+
+ if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
+ ssize, local) == -1)
+ old_pte &= ~_PAGE_HPTEFLAGS;
+ }
+
+ if (likely(!(old_pte & _PAGE_HASHPTE))) {
+ unsigned long hash = hpt_hash(va, shift, ssize);
+ unsigned long hpte_group;
+
+ pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
+
+repeat:
+ hpte_group = ((hash & htab_hash_mask) *
+ HPTES_PER_GROUP) & ~0x7UL;
+
+ /* clear HPTE slot informations in new PTE */
+#ifdef CONFIG_PPC_64K_PAGES
+ new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
+#else
+ new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
+#endif
+ /* Add in WIMG bits */
+ rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
+ _PAGE_COHERENT | _PAGE_GUARDED));
+
+ /* Insert into the hash table, primary slot */
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
+ mmu_psize, ssize);
+
+ /* Primary is full, try the secondary */
+ if (unlikely(slot == -1)) {
+ hpte_group = ((~hash & htab_hash_mask) *
+ HPTES_PER_GROUP) & ~0x7UL;
+ slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
+ HPTE_V_SECONDARY,
+ mmu_psize, ssize);
+ if (slot == -1) {
+ if (mftb() & 0x1)
+ hpte_group = ((hash & htab_hash_mask) *
+ HPTES_PER_GROUP)&~0x7UL;
+
+ ppc_md.hpte_remove(hpte_group);
+ goto repeat;
+ }
+ }
+
+ if (unlikely(slot == -2))
+ panic("hash_huge_page: pte_insert failed\n");
+
+ new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
+ }
+
+ /*
+ * No need to use ldarx/stdcx here
+ */
+ *ptep = __pte(new_pte & ~_PAGE_BUSY);
+
+ err = 0;
+
+ out:
+ return err;
+}
* Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
*/
-#include <linux/init.h>
-#include <linux/fs.h>
#include <linux/mm.h>
+#include <linux/io.h>
#include <linux/hugetlb.h>
-#include <linux/pagemap.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/sysctl.h>
-#include <asm/mman.h>
+#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/tlb.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <asm/machdep.h>
-#include <asm/cputable.h>
-#include <asm/spu.h>
#define PAGE_SHIFT_64K 16
#define PAGE_SHIFT_16M 24
#define PAGE_SHIFT_16G 34
-#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT)
-#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT)
#define MAX_NUMBER_GPAGES 1024
/* Tracks the 16G pages after the device tree is scanned and before the
static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
static unsigned nr_gpages;
-/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
- * stored for the huge page sizes that are valid.
- */
-unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
-
-#define hugepte_shift mmu_huge_psizes
-#define PTRS_PER_HUGEPTE(psize) (1 << hugepte_shift[psize])
-#define HUGEPTE_TABLE_SIZE(psize) (sizeof(pte_t) << hugepte_shift[psize])
-
-#define HUGEPD_SHIFT(psize) (mmu_psize_to_shift(psize) \
- + hugepte_shift[psize])
-#define HUGEPD_SIZE(psize) (1UL << HUGEPD_SHIFT(psize))
-#define HUGEPD_MASK(psize) (~(HUGEPD_SIZE(psize)-1))
-
-/* Subtract one from array size because we don't need a cache for 4K since
- * is not a huge page size */
-#define HUGE_PGTABLE_INDEX(psize) (HUGEPTE_CACHE_NUM + psize - 1)
-#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize])
-
-static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
- [MMU_PAGE_64K] = "hugepte_cache_64K",
- [MMU_PAGE_1M] = "hugepte_cache_1M",
- [MMU_PAGE_16M] = "hugepte_cache_16M",
- [MMU_PAGE_16G] = "hugepte_cache_16G",
-};
-
/* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad()
* will choke on pointers to hugepte tables, which is handy for
* catching screwups early. */
-#define HUGEPD_OK 0x1
-
-typedef struct { unsigned long pd; } hugepd_t;
-
-#define hugepd_none(hpd) ((hpd).pd == 0)
static inline int shift_to_mmu_psize(unsigned int shift)
{
- switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
- case PAGE_SHIFT_64K:
- return MMU_PAGE_64K;
-#endif
- case PAGE_SHIFT_16M:
- return MMU_PAGE_16M;
- case PAGE_SHIFT_16G:
- return MMU_PAGE_16G;
- }
+ int psize;
+
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize)
+ if (mmu_psize_defs[psize].shift == shift)
+ return psize;
return -1;
}
BUG();
}
+#define hugepd_none(hpd) ((hpd).pd == 0)
+
static inline pte_t *hugepd_page(hugepd_t hpd)
{
- BUG_ON(!(hpd.pd & HUGEPD_OK));
- return (pte_t *)(hpd.pd & ~HUGEPD_OK);
+ BUG_ON(!hugepd_ok(hpd));
+ return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000);
+}
+
+static inline unsigned int hugepd_shift(hugepd_t hpd)
+{
+ return hpd.pd & HUGEPD_SHIFT_MASK;
}
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
- struct hstate *hstate)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift)
{
- unsigned int shift = huge_page_shift(hstate);
- int psize = shift_to_mmu_psize(shift);
- unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
+ unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp);
pte_t *dir = hugepd_page(*hpdp);
return dir + idx;
}
+pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift)
+{
+ pgd_t *pg;
+ pud_t *pu;
+ pmd_t *pm;
+ hugepd_t *hpdp = NULL;
+ unsigned pdshift = PGDIR_SHIFT;
+
+ if (shift)
+ *shift = 0;
+
+ pg = pgdir + pgd_index(ea);
+ if (is_hugepd(pg)) {
+ hpdp = (hugepd_t *)pg;
+ } else if (!pgd_none(*pg)) {
+ pdshift = PUD_SHIFT;
+ pu = pud_offset(pg, ea);
+ if (is_hugepd(pu))
+ hpdp = (hugepd_t *)pu;
+ else if (!pud_none(*pu)) {
+ pdshift = PMD_SHIFT;
+ pm = pmd_offset(pu, ea);
+ if (is_hugepd(pm))
+ hpdp = (hugepd_t *)pm;
+ else if (!pmd_none(*pm)) {
+ return pte_offset_map(pm, ea);
+ }
+ }
+ }
+
+ if (!hpdp)
+ return NULL;
+
+ if (shift)
+ *shift = hugepd_shift(*hpdp);
+ return hugepte_offset(hpdp, ea, pdshift);
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ return find_linux_pte_or_hugepte(mm->pgd, addr, NULL);
+}
+
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
- unsigned long address, unsigned int psize)
+ unsigned long address, unsigned pdshift, unsigned pshift)
{
- pte_t *new = kmem_cache_zalloc(pgtable_cache[HUGE_PGTABLE_INDEX(psize)],
- GFP_KERNEL|__GFP_REPEAT);
+ pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift),
+ GFP_KERNEL|__GFP_REPEAT);
+
+ BUG_ON(pshift > HUGEPD_SHIFT_MASK);
+ BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK);
if (! new)
return -ENOMEM;
spin_lock(&mm->page_table_lock);
if (!hugepd_none(*hpdp))
- kmem_cache_free(pgtable_cache[HUGE_PGTABLE_INDEX(psize)], new);
+ kmem_cache_free(PGT_CACHE(pdshift - pshift), new);
else
- hpdp->pd = (unsigned long)new | HUGEPD_OK;
+ hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift;
spin_unlock(&mm->page_table_lock);
return 0;
}
-
-static pud_t *hpud_offset(pgd_t *pgd, unsigned long addr, struct hstate *hstate)
-{
- if (huge_page_shift(hstate) < PUD_SHIFT)
- return pud_offset(pgd, addr);
- else
- return (pud_t *) pgd;
-}
-static pud_t *hpud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long addr,
- struct hstate *hstate)
+pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
{
- if (huge_page_shift(hstate) < PUD_SHIFT)
- return pud_alloc(mm, pgd, addr);
- else
- return (pud_t *) pgd;
-}
-static pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
-{
- if (huge_page_shift(hstate) < PMD_SHIFT)
- return pmd_offset(pud, addr);
- else
- return (pmd_t *) pud;
-}
-static pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
- struct hstate *hstate)
-{
- if (huge_page_shift(hstate) < PMD_SHIFT)
- return pmd_alloc(mm, pud, addr);
- else
- return (pmd_t *) pud;
+ pgd_t *pg;
+ pud_t *pu;
+ pmd_t *pm;
+ hugepd_t *hpdp = NULL;
+ unsigned pshift = __ffs(sz);
+ unsigned pdshift = PGDIR_SHIFT;
+
+ addr &= ~(sz-1);
+
+ pg = pgd_offset(mm, addr);
+ if (pshift >= PUD_SHIFT) {
+ hpdp = (hugepd_t *)pg;
+ } else {
+ pdshift = PUD_SHIFT;
+ pu = pud_alloc(mm, pg, addr);
+ if (pshift >= PMD_SHIFT) {
+ hpdp = (hugepd_t *)pu;
+ } else {
+ pdshift = PMD_SHIFT;
+ pm = pmd_alloc(mm, pu, addr);
+ hpdp = (hugepd_t *)pm;
+ }
+ }
+
+ if (!hpdp)
+ return NULL;
+
+ BUG_ON(!hugepd_none(*hpdp) && !hugepd_ok(*hpdp));
+
+ if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, pdshift, pshift))
+ return NULL;
+
+ return hugepte_offset(hpdp, addr, pdshift);
}
/* Build list of addresses of gigantic pages. This function is used in early
return 1;
}
-
-/* Modelled after find_linux_pte() */
-pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
-{
- pgd_t *pg;
- pud_t *pu;
- pmd_t *pm;
-
- unsigned int psize;
- unsigned int shift;
- unsigned long sz;
- struct hstate *hstate;
- psize = get_slice_psize(mm, addr);
- shift = mmu_psize_to_shift(psize);
- sz = ((1UL) << shift);
- hstate = size_to_hstate(sz);
-
- addr &= hstate->mask;
-
- pg = pgd_offset(mm, addr);
- if (!pgd_none(*pg)) {
- pu = hpud_offset(pg, addr, hstate);
- if (!pud_none(*pu)) {
- pm = hpmd_offset(pu, addr, hstate);
- if (!pmd_none(*pm))
- return hugepte_offset((hugepd_t *)pm, addr,
- hstate);
- }
- }
-
- return NULL;
-}
-
-pte_t *huge_pte_alloc(struct mm_struct *mm,
- unsigned long addr, unsigned long sz)
-{
- pgd_t *pg;
- pud_t *pu;
- pmd_t *pm;
- hugepd_t *hpdp = NULL;
- struct hstate *hstate;
- unsigned int psize;
- hstate = size_to_hstate(sz);
-
- psize = get_slice_psize(mm, addr);
- BUG_ON(!mmu_huge_psizes[psize]);
-
- addr &= hstate->mask;
-
- pg = pgd_offset(mm, addr);
- pu = hpud_alloc(mm, pg, addr, hstate);
-
- if (pu) {
- pm = hpmd_alloc(mm, pu, addr, hstate);
- if (pm)
- hpdp = (hugepd_t *)pm;
- }
-
- if (! hpdp)
- return NULL;
-
- if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
- return NULL;
-
- return hugepte_offset(hpdp, addr, hstate);
-}
-
int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
{
return 0;
}
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
- unsigned int psize)
+static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift,
+ unsigned long start, unsigned long end,
+ unsigned long floor, unsigned long ceiling)
{
pte_t *hugepte = hugepd_page(*hpdp);
+ unsigned shift = hugepd_shift(*hpdp);
+ unsigned long pdmask = ~((1UL << pdshift) - 1);
+
+ start &= pdmask;
+ if (start < floor)
+ return;
+ if (ceiling) {
+ ceiling &= pdmask;
+ if (! ceiling)
+ return;
+ }
+ if (end - 1 > ceiling - 1)
+ return;
hpdp->pd = 0;
tlb->need_flush = 1;
- pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
- HUGEPTE_CACHE_NUM+psize-1,
- PGF_CACHENUM_MASK));
+ pgtable_free_tlb(tlb, hugepte, pdshift - shift);
}
static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
unsigned long addr, unsigned long end,
- unsigned long floor, unsigned long ceiling,
- unsigned int psize)
+ unsigned long floor, unsigned long ceiling)
{
pmd_t *pmd;
unsigned long next;
next = pmd_addr_end(addr, end);
if (pmd_none(*pmd))
continue;
- free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
+ free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT,
+ addr, next, floor, ceiling);
} while (pmd++, addr = next, addr != end);
start &= PUD_MASK;
pud_t *pud;
unsigned long next;
unsigned long start;
- unsigned int shift;
- unsigned int psize = get_slice_psize(tlb->mm, addr);
- shift = mmu_psize_to_shift(psize);
start = addr;
pud = pud_offset(pgd, addr);
do {
next = pud_addr_end(addr, end);
- if (shift < PMD_SHIFT) {
+ if (!is_hugepd(pud)) {
if (pud_none_or_clear_bad(pud))
continue;
hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
- ceiling, psize);
+ ceiling);
} else {
- if (pud_none(*pud))
- continue;
- free_hugepte_range(tlb, (hugepd_t *)pud, psize);
+ free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT,
+ addr, next, floor, ceiling);
}
} while (pud++, addr = next, addr != end);
{
pgd_t *pgd;
unsigned long next;
- unsigned long start;
/*
- * Comments below take from the normal free_pgd_range(). They
- * apply here too. The tests against HUGEPD_MASK below are
- * essential, because we *don't* test for this at the bottom
- * level. Without them we'll attempt to free a hugepte table
- * when we unmap just part of it, even if there are other
- * active mappings using it.
- *
- * The next few lines have given us lots of grief...
- *
- * Why are we testing HUGEPD* at this top level? Because
- * often there will be no work to do at all, and we'd prefer
- * not to go all the way down to the bottom just to discover
- * that.
- *
- * Why all these "- 1"s? Because 0 represents both the bottom
- * of the address space and the top of it (using -1 for the
- * top wouldn't help much: the masks would do the wrong thing).
- * The rule is that addr 0 and floor 0 refer to the bottom of
- * the address space, but end 0 and ceiling 0 refer to the top
- * Comparisons need to use "end - 1" and "ceiling - 1" (though
- * that end 0 case should be mythical).
+ * Because there are a number of different possible pagetable
+ * layouts for hugepage ranges, we limit knowledge of how
+ * things should be laid out to the allocation path
+ * (huge_pte_alloc(), above). Everything else works out the
+ * structure as it goes from information in the hugepd
+ * pointers. That means that we can't here use the
+ * optimization used in the normal page free_pgd_range(), of
+ * checking whether we're actually covering a large enough
+ * range to have to do anything at the top level of the walk
+ * instead of at the bottom.
*
- * Wherever addr is brought up or ceiling brought down, we
- * must be careful to reject "the opposite 0" before it
- * confuses the subsequent tests. But what about where end is
- * brought down by HUGEPD_SIZE below? no, end can't go down to
- * 0 there.
- *
- * Whereas we round start (addr) and ceiling down, by different
- * masks at different levels, in order to test whether a table
- * now has no other vmas using it, so can be freed, we don't
- * bother to round floor or end up - the tests don't need that.
+ * To make sense of this, you should probably go read the big
+ * block comment at the top of the normal free_pgd_range(),
+ * too.
*/
- unsigned int psize = get_slice_psize(tlb->mm, addr);
-
- addr &= HUGEPD_MASK(psize);
- if (addr < floor) {
- addr += HUGEPD_SIZE(psize);
- if (!addr)
- return;
- }
- if (ceiling) {
- ceiling &= HUGEPD_MASK(psize);
- if (!ceiling)
- return;
- }
- if (end - 1 > ceiling - 1)
- end -= HUGEPD_SIZE(psize);
- if (addr > end - 1)
- return;
- start = addr;
pgd = pgd_offset(tlb->mm, addr);
do {
- psize = get_slice_psize(tlb->mm, addr);
- BUG_ON(!mmu_huge_psizes[psize]);
next = pgd_addr_end(addr, end);
- if (mmu_psize_to_shift(psize) < PUD_SHIFT) {
+ if (!is_hugepd(pgd)) {
if (pgd_none_or_clear_bad(pgd))
continue;
hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
} else {
- if (pgd_none(*pgd))
- continue;
- free_hugepte_range(tlb, (hugepd_t *)pgd, psize);
+ free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT,
+ addr, next, floor, ceiling);
}
} while (pgd++, addr = next, addr != end);
}
-void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep, pte_t pte)
-{
- if (pte_present(*ptep)) {
- /* We open-code pte_clear because we need to pass the right
- * argument to hpte_need_flush (huge / !huge). Might not be
- * necessary anymore if we make hpte_need_flush() get the
- * page size from the slices
- */
- unsigned int psize = get_slice_psize(mm, addr);
- unsigned int shift = mmu_psize_to_shift(psize);
- unsigned long sz = ((1UL) << shift);
- struct hstate *hstate = size_to_hstate(sz);
- pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
- }
- *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-}
-
-pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
- pte_t *ptep)
-{
- unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1);
- return __pte(old);
-}
-
struct page *
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
pte_t *ptep;
struct page *page;
- unsigned int mmu_psize = get_slice_psize(mm, address);
+ unsigned shift;
+ unsigned long mask;
+
+ ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
/* Verify it is a huge page else bail. */
- if (!mmu_huge_psizes[mmu_psize])
+ if (!ptep || !shift)
return ERR_PTR(-EINVAL);
- ptep = huge_pte_offset(mm, address);
+ mask = (1UL << shift) - 1;
page = pte_page(*ptep);
- if (page) {
- unsigned int shift = mmu_psize_to_shift(mmu_psize);
- unsigned long sz = ((1UL) << shift);
- page += (address % sz) / PAGE_SIZE;
- }
+ if (page)
+ page += (address & mask) / PAGE_SIZE;
return page;
}
return NULL;
}
+static noinline int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr,
+ unsigned long end, int write, struct page **pages, int *nr)
+{
+ unsigned long mask;
+ unsigned long pte_end;
+ struct page *head, *page;
+ pte_t pte;
+ int refs;
+
+ pte_end = (addr + sz) & ~(sz-1);
+ if (pte_end < end)
+ end = pte_end;
+
+ pte = *ptep;
+ mask = _PAGE_PRESENT | _PAGE_USER;
+ if (write)
+ mask |= _PAGE_RW;
+
+ if ((pte_val(pte) & mask) != mask)
+ return 0;
+
+ /* hugepages are never "special" */
+ VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+ refs = 0;
+ head = pte_page(pte);
+
+ page = head + ((addr & (sz-1)) >> PAGE_SHIFT);
+ do {
+ VM_BUG_ON(compound_head(page) != head);
+ pages[*nr] = page;
+ (*nr)++;
+ page++;
+ refs++;
+ } while (addr += PAGE_SIZE, addr != end);
+
+ if (!page_cache_add_speculative(head, refs)) {
+ *nr -= refs;
+ return 0;
+ }
+
+ if (unlikely(pte_val(pte) != pte_val(*ptep))) {
+ /* Could be optimized better */
+ while (*nr) {
+ put_page(page);
+ (*nr)--;
+ }
+ }
+
+ return 1;
+}
+
+static unsigned long hugepte_addr_end(unsigned long addr, unsigned long end,
+ unsigned long sz)
+{
+ unsigned long __boundary = (addr + sz) & ~(sz-1);
+ return (__boundary - 1 < end - 1) ? __boundary : end;
+}
+
+int gup_hugepd(hugepd_t *hugepd, unsigned pdshift,
+ unsigned long addr, unsigned long end,
+ int write, struct page **pages, int *nr)
+{
+ pte_t *ptep;
+ unsigned long sz = 1UL << hugepd_shift(*hugepd);
+ unsigned long next;
+
+ ptep = hugepte_offset(hugepd, addr, pdshift);
+ do {
+ next = hugepte_addr_end(addr, end, sz);
+ if (!gup_hugepte(ptep, sz, addr, end, write, pages, nr))
+ return 0;
+ } while (ptep++, addr = next, addr != end);
+
+ return 1;
+}
unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff,
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
- if (!mmu_huge_psizes[mmu_psize])
- return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}
return 1UL << mmu_psize_to_shift(psize);
}
-/*
- * Called by asm hashtable.S for doing lazy icache flush
- */
-static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
- pte_t pte, int trap, unsigned long sz)
+static int __init add_huge_page_size(unsigned long long size)
{
- struct page *page;
- int i;
-
- if (!pfn_valid(pte_pfn(pte)))
- return rflags;
-
- page = pte_page(pte);
-
- /* page is dirty */
- if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
- if (trap == 0x400) {
- for (i = 0; i < (sz / PAGE_SIZE); i++)
- __flush_dcache_icache(page_address(page+i));
- set_bit(PG_arch_1, &page->flags);
- } else {
- rflags |= HPTE_R_N;
- }
- }
- return rflags;
-}
+ int shift = __ffs(size);
+ int mmu_psize;
-int hash_huge_page(struct mm_struct *mm, unsigned long access,
- unsigned long ea, unsigned long vsid, int local,
- unsigned long trap)
-{
- pte_t *ptep;
- unsigned long old_pte, new_pte;
- unsigned long va, rflags, pa, sz;
- long slot;
- int err = 1;
- int ssize = user_segment_size(ea);
- unsigned int mmu_psize;
- int shift;
- mmu_psize = get_slice_psize(mm, ea);
-
- if (!mmu_huge_psizes[mmu_psize])
- goto out;
- ptep = huge_pte_offset(mm, ea);
-
- /* Search the Linux page table for a match with va */
- va = hpt_va(ea, vsid, ssize);
+ /* Check that it is a page size supported by the hardware and
+ * that it fits within pagetable and slice limits. */
+ if (!is_power_of_2(size)
+ || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT))
+ return -EINVAL;
- /*
- * If no pte found or not present, send the problem up to
- * do_page_fault
- */
- if (unlikely(!ptep || pte_none(*ptep)))
- goto out;
+ if ((mmu_psize = shift_to_mmu_psize(shift)) < 0)
+ return -EINVAL;
- /*
- * Check the user's access rights to the page. If access should be
- * prevented then send the problem up to do_page_fault.
+#ifdef CONFIG_SPU_FS_64K_LS
+ /* Disable support for 64K huge pages when 64K SPU local store
+ * support is enabled as the current implementation conflicts.
*/
- if (unlikely(access & ~pte_val(*ptep)))
- goto out;
- /*
- * At this point, we have a pte (old_pte) which can be used to build
- * or update an HPTE. There are 2 cases:
- *
- * 1. There is a valid (present) pte with no associated HPTE (this is
- * the most common case)
- * 2. There is a valid (present) pte with an associated HPTE. The
- * current values of the pp bits in the HPTE prevent access
- * because we are doing software DIRTY bit management and the
- * page is currently not DIRTY.
- */
-
-
- do {
- old_pte = pte_val(*ptep);
- if (old_pte & _PAGE_BUSY)
- goto out;
- new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
- } while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
- old_pte, new_pte));
-
- rflags = 0x2 | (!(new_pte & _PAGE_RW));
- /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
- rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
- shift = mmu_psize_to_shift(mmu_psize);
- sz = ((1UL) << shift);
- if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
- /* No CPU has hugepages but lacks no execute, so we
- * don't need to worry about that case */
- rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
- trap, sz);
-
- /* Check if pte already has an hpte (case 2) */
- if (unlikely(old_pte & _PAGE_HASHPTE)) {
- /* There MIGHT be an HPTE for this pte */
- unsigned long hash, slot;
-
- hash = hpt_hash(va, shift, ssize);
- if (old_pte & _PAGE_F_SECOND)
- hash = ~hash;
- slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
- slot += (old_pte & _PAGE_F_GIX) >> 12;
-
- if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
- ssize, local) == -1)
- old_pte &= ~_PAGE_HPTEFLAGS;
- }
-
- if (likely(!(old_pte & _PAGE_HASHPTE))) {
- unsigned long hash = hpt_hash(va, shift, ssize);
- unsigned long hpte_group;
-
- pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
-
-repeat:
- hpte_group = ((hash & htab_hash_mask) *
- HPTES_PER_GROUP) & ~0x7UL;
-
- /* clear HPTE slot informations in new PTE */
-#ifdef CONFIG_PPC_64K_PAGES
- new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
-#else
- new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-#endif
- /* Add in WIMG bits */
- rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
- _PAGE_COHERENT | _PAGE_GUARDED));
-
- /* Insert into the hash table, primary slot */
- slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
- mmu_psize, ssize);
-
- /* Primary is full, try the secondary */
- if (unlikely(slot == -1)) {
- hpte_group = ((~hash & htab_hash_mask) *
- HPTES_PER_GROUP) & ~0x7UL;
- slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
- HPTE_V_SECONDARY,
- mmu_psize, ssize);
- if (slot == -1) {
- if (mftb() & 0x1)
- hpte_group = ((hash & htab_hash_mask) *
- HPTES_PER_GROUP)&~0x7UL;
-
- ppc_md.hpte_remove(hpte_group);
- goto repeat;
- }
- }
-
- if (unlikely(slot == -2))
- panic("hash_huge_page: pte_insert failed\n");
-
- new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
- }
+ if (shift == PAGE_SHIFT_64K)
+ return -EINVAL;
+#endif /* CONFIG_SPU_FS_64K_LS */
- /*
- * No need to use ldarx/stdcx here
- */
- *ptep = __pte(new_pte & ~_PAGE_BUSY);
+ BUG_ON(mmu_psize_defs[mmu_psize].shift != shift);
- err = 0;
+ /* Return if huge page size has already been setup */
+ if (size_to_hstate(size))
+ return 0;
- out:
- return err;
-}
+ hugetlb_add_hstate(shift - PAGE_SHIFT);
-static void __init set_huge_psize(int psize)
-{
- /* Check that it is a page size supported by the hardware and
- * that it fits within pagetable limits. */
- if (mmu_psize_defs[psize].shift &&
- mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
- (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
- mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
- mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
- /* Return if huge page size has already been setup or is the
- * same as the base page size. */
- if (mmu_huge_psizes[psize] ||
- mmu_psize_defs[psize].shift == PAGE_SHIFT)
- return;
- if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
- return;
- hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
-
- switch (mmu_psize_defs[psize].shift) {
- case PAGE_SHIFT_64K:
- /* We only allow 64k hpages with 4k base page,
- * which was checked above, and always put them
- * at the PMD */
- hugepte_shift[psize] = PMD_SHIFT;
- break;
- case PAGE_SHIFT_16M:
- /* 16M pages can be at two different levels
- * of pagestables based on base page size */
- if (PAGE_SHIFT == PAGE_SHIFT_64K)
- hugepte_shift[psize] = PMD_SHIFT;
- else /* 4k base page */
- hugepte_shift[psize] = PUD_SHIFT;
- break;
- case PAGE_SHIFT_16G:
- /* 16G pages are always at PGD level */
- hugepte_shift[psize] = PGDIR_SHIFT;
- break;
- }
- hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
- } else
- hugepte_shift[psize] = 0;
+ return 0;
}
static int __init hugepage_setup_sz(char *str)
{
unsigned long long size;
- int mmu_psize;
- int shift;
size = memparse(str, &str);
- shift = __ffs(size);
- mmu_psize = shift_to_mmu_psize(shift);
- if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
- set_huge_psize(mmu_psize);
- else
+ if (add_huge_page_size(size) != 0)
printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
return 1;
static int __init hugetlbpage_init(void)
{
- unsigned int psize;
+ int psize;
if (!cpu_has_feature(CPU_FTR_16M_PAGE))
return -ENODEV;
- /* Add supported huge page sizes. Need to change HUGE_MAX_HSTATE
- * and adjust PTE_NONCACHE_NUM if the number of supported huge page
- * sizes changes.
- */
- set_huge_psize(MMU_PAGE_16M);
- set_huge_psize(MMU_PAGE_16G);
+ for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+ unsigned shift;
+ unsigned pdshift;
- /* Temporarily disable support for 64K huge pages when 64K SPU local
- * store support is enabled as the current implementation conflicts.
- */
-#ifndef CONFIG_SPU_FS_64K_LS
- set_huge_psize(MMU_PAGE_64K);
-#endif
+ if (!mmu_psize_defs[psize].shift)
+ continue;
- for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
- if (mmu_huge_psizes[psize]) {
- pgtable_cache[HUGE_PGTABLE_INDEX(psize)] =
- kmem_cache_create(
- HUGEPTE_CACHE_NAME(psize),
- HUGEPTE_TABLE_SIZE(psize),
- HUGEPTE_TABLE_SIZE(psize),
- 0,
- NULL);
- if (!pgtable_cache[HUGE_PGTABLE_INDEX(psize)])
- panic("hugetlbpage_init(): could not create %s"\
- "\n", HUGEPTE_CACHE_NAME(psize));
- }
+ shift = mmu_psize_to_shift(psize);
+
+ if (add_huge_page_size(1ULL << shift) < 0)
+ continue;
+
+ if (shift < PMD_SHIFT)
+ pdshift = PMD_SHIFT;
+ else if (shift < PUD_SHIFT)
+ pdshift = PUD_SHIFT;
+ else
+ pdshift = PGDIR_SHIFT;
+
+ pgtable_cache_add(pdshift - shift, NULL);
+ if (!PGT_CACHE(pdshift - shift))
+ panic("hugetlbpage_init(): could not create "
+ "pgtable cache for %d bit pagesize\n", shift);
}
+ /* Set default large page size. Currently, we pick 16M or 1M
+ * depending on what is available
+ */
+ if (mmu_psize_defs[MMU_PAGE_16M].shift)
+ HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
+ else if (mmu_psize_defs[MMU_PAGE_1M].shift)
+ HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
+
return 0;
}
module_init(hugetlbpage_init);
+
+void flush_dcache_icache_hugepage(struct page *page)
+{
+ int i;
+
+ BUG_ON(!PageCompound(page));
+
+ for (i = 0; i < (1UL << compound_order(page)); i++)
+ __flush_dcache_icache(page_address(page+i));
+}
#include <linux/module.h>
#include <linux/poison.h>
#include <linux/lmb.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
memset(addr, 0, PMD_TABLE_SIZE);
}
-static const unsigned int pgtable_cache_size[2] = {
- PGD_TABLE_SIZE, PMD_TABLE_SIZE
-};
-static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
-#ifdef CONFIG_PPC_64K_PAGES
- "pgd_cache", "pmd_cache",
-#else
- "pgd_cache", "pud_pmd_cache",
-#endif /* CONFIG_PPC_64K_PAGES */
-};
-
-#ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need an extra cache per hugepagesize, initialized in
- * hugetlbpage.c. We can't put into the tables above, because HPAGE_SHIFT
- * is not compile time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
-#else
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
-#endif
+struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE];
+
+/*
+ * Create a kmem_cache() for pagetables. This is not used for PTE
+ * pages - they're linked to struct page, come from the normal free
+ * pages pool and have a different entry size (see real_pte_t) to
+ * everything else. Caches created by this function are used for all
+ * the higher level pagetables, and for hugepage pagetables.
+ */
+void pgtable_cache_add(unsigned shift, void (*ctor)(void *))
+{
+ char *name;
+ unsigned long table_size = sizeof(void *) << shift;
+ unsigned long align = table_size;
+
+ /* When batching pgtable pointers for RCU freeing, we store
+ * the index size in the low bits. Table alignment must be
+ * big enough to fit it.
+ *
+ * Likewise, hugeapge pagetable pointers contain a (different)
+ * shift value in the low bits. All tables must be aligned so
+ * as to leave enough 0 bits in the address to contain it. */
+ unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1,
+ HUGEPD_SHIFT_MASK + 1);
+ struct kmem_cache *new;
+
+ /* It would be nice if this was a BUILD_BUG_ON(), but at the
+ * moment, gcc doesn't seem to recognize is_power_of_2 as a
+ * constant expression, so so much for that. */
+ BUG_ON(!is_power_of_2(minalign));
+ BUG_ON((shift < 1) || (shift > MAX_PGTABLE_INDEX_SIZE));
+
+ if (PGT_CACHE(shift))
+ return; /* Already have a cache of this size */
+
+ align = max_t(unsigned long, align, minalign);
+ name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift);
+ new = kmem_cache_create(name, table_size, align, 0, ctor);
+ PGT_CACHE(shift) = new;
+
+ pr_debug("Allocated pgtable cache for order %d\n", shift);
+}
+
void pgtable_cache_init(void)
{
- pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
- pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
+ pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor);
+ pgtable_cache_add(PMD_INDEX_SIZE, pmd_ctor);
+ if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_INDEX_SIZE))
+ panic("Couldn't allocate pgtable caches");
+
+ /* In all current configs, when the PUD index exists it's the
+ * same size as either the pgd or pmd index. Verify that the
+ * initialization above has also created a PUD cache. This
+ * will need re-examiniation if we add new possibilities for
+ * the pagetable layout. */
+ BUG_ON(PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE));
}
#ifdef CONFIG_SPARSEMEM_VMEMMAP
#include <linux/pagemap.h>
#include <linux/suspend.h>
#include <linux/lmb.h>
+#include <linux/hugetlb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
void flush_dcache_icache_page(struct page *page)
{
+#ifdef CONFIG_HUGETLB_PAGE
+ if (PageCompound(page)) {
+ flush_dcache_icache_hugepage(page);
+ return;
+ }
+#endif
#ifdef CONFIG_BOOKE
- void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
- __flush_dcache_icache(start);
- kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ {
+ void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
+ __flush_dcache_icache(start);
+ kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
+ }
#elif defined(CONFIG_8xx) || defined(CONFIG_PPC64)
/* On 8xx there is no need to kmap since highmem is not supported */
__flush_dcache_icache(page_address(page));
#else
__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
#endif
-
}
+
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
clear_page(page);
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
+#include <linux/module.h>
#include <asm/mmu_context.h>
#define NO_CONTEXT 0
#define MAX_CONTEXT ((1UL << 19) - 1)
-int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+int __init_new_context(void)
{
int index;
int err;
return -ENOMEM;
}
+ return index;
+}
+EXPORT_SYMBOL_GPL(__init_new_context);
+
+int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ int index;
+
+ index = __init_new_context();
+ if (index < 0)
+ return index;
+
/* The old code would re-promote on fork, we don't do that
* when using slices as it could cause problem promoting slices
* that have been forced down to 4K
*/
if (slice_mm_new_context(mm))
slice_set_user_psize(mm, mmu_virtual_psize);
+ subpage_prot_init_new_context(mm);
mm->context.id = index;
return 0;
}
-void destroy_context(struct mm_struct *mm)
+void __destroy_context(int context_id)
{
spin_lock(&mmu_context_lock);
- idr_remove(&mmu_context_idr, mm->context.id);
+ idr_remove(&mmu_context_idr, context_id);
spin_unlock(&mmu_context_lock);
+}
+EXPORT_SYMBOL_GPL(__destroy_context);
+void destroy_context(struct mm_struct *mm)
+{
+ __destroy_context(mm->context.id);
+ subpage_prot_free(mm);
mm->context.id = NO_CONTEXT;
}
* also clear mm->cpu_vm_mask bits when processes are migrated
*/
-#define DEBUG_MAP_CONSISTENCY
-#define DEBUG_CLAMP_LAST_CONTEXT 31
+//#define DEBUG_MAP_CONSISTENCY
+//#define DEBUG_CLAMP_LAST_CONTEXT 31
//#define DEBUG_HARDER
/* We don't use DEBUG because it tends to be compiled in always nowadays
#ifdef CONFIG_PPC32
-struct tlbcam {
- u32 MAS0;
- u32 MAS1;
- u32 MAS2;
- u32 MAS3;
- u32 MAS7;
-};
-
extern void mapin_ram(void);
extern int map_page(unsigned long va, phys_addr_t pa, int flags);
extern void setbat(int index, unsigned long virt, phys_addr_t phys,
unsigned int size, int flags);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
- unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
extern int __map_without_bats;
extern unsigned long ioremap_base;
{
struct rcu_head rcu;
unsigned int index;
- pgtable_free_t tables[0];
+ unsigned long tables[0];
};
#define PTE_FREELIST_SIZE \
((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
- / sizeof(pgtable_free_t))
+ / sizeof(unsigned long))
static void pte_free_smp_sync(void *arg)
{
/* This is only called when we are critically out of memory
* (and fail to get a page in pte_free_tlb).
*/
-static void pgtable_free_now(pgtable_free_t pgf)
+static void pgtable_free_now(void *table, unsigned shift)
{
pte_freelist_forced_free++;
smp_call_function(pte_free_smp_sync, NULL, 1);
- pgtable_free(pgf);
+ pgtable_free(table, shift);
}
static void pte_free_rcu_callback(struct rcu_head *head)
container_of(head, struct pte_freelist_batch, rcu);
unsigned int i;
- for (i = 0; i < batch->index; i++)
- pgtable_free(batch->tables[i]);
+ for (i = 0; i < batch->index; i++) {
+ void *table = (void *)(batch->tables[i] & ~MAX_PGTABLE_INDEX_SIZE);
+ unsigned shift = batch->tables[i] & MAX_PGTABLE_INDEX_SIZE;
+
+ pgtable_free(table, shift);
+ }
free_page((unsigned long)batch);
}
call_rcu(&batch->rcu, pte_free_rcu_callback);
}
-void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
{
/* This is safe since tlb_gather_mmu has disabled preemption */
struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur);
+ unsigned long pgf;
if (atomic_read(&tlb->mm->mm_users) < 2 ||
cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))){
- pgtable_free(pgf);
+ pgtable_free(table, shift);
return;
}
if (*batchp == NULL) {
*batchp = (struct pte_freelist_batch *)__get_free_page(GFP_ATOMIC);
if (*batchp == NULL) {
- pgtable_free_now(pgf);
+ pgtable_free_now(table, shift);
return;
}
(*batchp)->index = 0;
}
+ BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE);
+ pgf = (unsigned long)table | shift;
(*batchp)->tables[(*batchp)->index++] = pgf;
if ((*batchp)->index == PTE_FREELIST_SIZE) {
pte_free_submit(*batchp);
* Also makes sure that the subpage_prot_table structure is
* reinitialized for the next user.
*/
-void subpage_prot_free(pgd_t *pgd)
+void subpage_prot_free(struct mm_struct *mm)
{
- struct subpage_prot_table *spt = pgd_subpage_prot(pgd);
+ struct subpage_prot_table *spt = &mm->context.spt;
unsigned long i, j, addr;
u32 **p;
spt->maxaddr = 0;
}
+void subpage_prot_init_new_context(struct mm_struct *mm)
+{
+ struct subpage_prot_table *spt = &mm->context.spt;
+
+ memset(spt, 0, sizeof(*spt));
+}
+
static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
int npages)
{
static void subpage_prot_clear(unsigned long addr, unsigned long len)
{
struct mm_struct *mm = current->mm;
- struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd);
+ struct subpage_prot_table *spt = &mm->context.spt;
u32 **spm, *spp;
int i, nw;
unsigned long next, limit;
long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map)
{
struct mm_struct *mm = current->mm;
- struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd);
+ struct subpage_prot_table *spt = &mm->context.spt;
u32 **spm, *spp;
int i, nw;
unsigned long next, limit;
i = batch->index;
- /* We mask the address for the base page size. Huge pages will
- * have applied their own masking already
- */
- addr &= PAGE_MASK;
-
/* Get page size (maybe move back to caller).
*
* NOTE: when using special 64K mappings in 4K environment like
} else
psize = pte_pagesize_index(mm, addr, pte);
+ /* Mask the address for the correct page size */
+ addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1);
+
/* Build full vaddr */
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
}
static struct irq_chip cpld_pic = {
- .typename = " CPLD PIC ",
+ .name = " CPLD PIC ",
.mask = cpld_mask_irq,
.ack = cpld_mask_irq,
.unmask = cpld_unmask_irq,
cpld_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
return 0;
}
}
static struct irq_chip media5200_irq_chip = {
- .typename = "Media5200 FPGA",
+ .name = "Media5200 FPGA",
.unmask = media5200_irq_unmask,
.mask = media5200_irq_mask,
.mask_ack = media5200_irq_mask,
static int media5200_irq_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw);
set_irq_chip_data(virq, &media5200_irq);
}
static struct irq_chip mpc52xx_gpt_irq_chip = {
- .typename = "MPC52xx GPT",
+ .name = "MPC52xx GPT",
.unmask = mpc52xx_gpt_irq_unmask,
.mask = mpc52xx_gpt_irq_mask,
.ack = mpc52xx_gpt_irq_ack,
}
static struct irq_chip mpc52xx_extirq_irqchip = {
- .typename = "MPC52xx External",
+ .name = "MPC52xx External",
.mask = mpc52xx_extirq_mask,
.unmask = mpc52xx_extirq_unmask,
.ack = mpc52xx_extirq_ack,
}
static struct irq_chip mpc52xx_main_irqchip = {
- .typename = "MPC52xx Main",
+ .name = "MPC52xx Main",
.mask = mpc52xx_main_mask,
.mask_ack = mpc52xx_main_mask,
.unmask = mpc52xx_main_unmask,
}
static struct irq_chip mpc52xx_periph_irqchip = {
- .typename = "MPC52xx Peripherals",
+ .name = "MPC52xx Peripherals",
.mask = mpc52xx_periph_mask,
.mask_ack = mpc52xx_periph_mask,
.unmask = mpc52xx_periph_unmask,
}
static struct irq_chip mpc52xx_sdma_irqchip = {
- .typename = "MPC52xx SDMA",
+ .name = "MPC52xx SDMA",
.mask = mpc52xx_sdma_mask,
.unmask = mpc52xx_sdma_unmask,
.ack = mpc52xx_sdma_ack,
return -ENOMEM;
bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (bus->irq == NULL) {
+ ret = -ENOMEM;
+ goto err_free_bus;
+ }
bus->name = "ep8248e-mdio-bitbang";
bus->parent = &ofdev->dev;
snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
- return of_mdiobus_register(bus, ofdev->node);
+ ret = of_mdiobus_register(bus, ofdev->node);
+ if (ret)
+ goto err_free_irq;
+
+ return 0;
+err_free_irq:
+ kfree(bus->irq);
+err_free_bus:
+ free_mdio_bitbang(bus);
+ return ret;
}
static int ep8248e_mdio_remove(struct of_device *ofdev)
}
static struct irq_chip pq2ads_pci_ic = {
- .typename = "PQ2 ADS PCI",
.name = "PQ2 ADS PCI",
.end = pq2ads_pci_unmask_irq,
.mask = pq2ads_pci_mask_irq,
static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_data(virq, h->host_data);
set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
return 0;
prop = of_get_property(np, "mode", NULL);
if (prop && !strcmp(prop, "cpu-qe"))
- pdata.qe_mode = 1;
+ pdata.flags = SPI_QE_CPU_MODE;
for (j = 0; j < num_board_infos; j++) {
if (board_infos[j].bus_num == pdata.bus_num)
{
return deep_sleeping;
}
+EXPORT_SYMBOL(fsl_deep_sleep);
static int mpc83xx_change_state(void)
{
-menuconfig MPC85xx
- bool "Machine Type"
- depends on PPC_85xx
+menuconfig FSL_SOC_BOOKE
+ bool "Freescale Book-E Machine Type"
+ depends on PPC_85xx || PPC_BOOK3E
+ select FSL_SOC
select PPC_UDBG_16550
select MPIC
select PPC_PCI_CHOICE
select SERIAL_8250_SHARE_IRQ if SERIAL_8250
default y
-if MPC85xx
+if FSL_SOC_BOOKE
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
help
This option enables support for the Wind River SBC8560 board
-endif # MPC85xx
+config P4080_DS
+ bool "Freescale P4080 DS"
+ select DEFAULT_UIMAGE
+ select PPC_FSL_BOOK3E
+ select PPC_E500MC
+ select PHYS_64BIT
+ select SWIOTLB
+ select MPC8xxx_GPIO
+ select HAS_RAPIDIO
+ help
+ This option enables support for the P4080 DS board
+
+endif # FSL_SOC_BOOKE
config TQM85xx
bool
obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
+obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
--- /dev/null
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/lmb.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init corenet_ds_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+ unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN |
+ MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU;
+
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Failed to map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ if (ppc_md.get_irq == mpic_get_coreint_irq)
+ flags |= MPIC_ENABLE_COREINT;
+
+ mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+
+ mpic_init(mpic);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#endif
+
+void __init corenet_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+ struct pci_controller *hose;
+#endif
+ dma_addr_t max = 0xffffffff;
+
+#ifdef CONFIG_SMP
+ mpc85xx_smp_init();
+#endif
+
+#ifdef CONFIG_PCI
+ for_each_compatible_node(np, "pci", "fsl,p4080-pcie") {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == primary_phb_addr)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+
+ hose = pci_find_hose_for_OF_device(np);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+#endif
+
+#ifdef CONFIG_SWIOTLB
+ if (lmb_end_of_DRAM() > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+ pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+}
+
+static const struct of_device_id of_device_ids[] __devinitconst = {
+ {
+ .compatible = "simple-bus"
+ },
+ {
+ .compatible = "fsl,rapidio-delta",
+ },
+ {}
+};
+
+int __init corenet_ds_publish_devices(void)
+{
+ return of_platform_bus_probe(NULL, of_device_ids, NULL);
+}
--- /dev/null
+/*
+ * Corenet based SoC DS Setup
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef CORENET_DS_H
+#define CORENET_DS_H
+
+extern void __init corenet_ds_pic_init(void);
+extern void __init corenet_ds_setup_arch(void);
+extern int __init corenet_ds_publish_devices(void);
+
+#endif
{ .compatible = "fsl,qe", },
{ .compatible = "gianfar", },
{ .compatible = "fsl,rapidio-delta", },
+ { .compatible = "fsl,mpc8548-guts", },
{},
};
struct mpic *mpic;
struct resource r;
struct device_node *np;
+ unsigned long root = of_get_flat_dt_root();
np = of_find_node_by_type(NULL, "open-pic");
if (np == NULL) {
return;
}
- mpic = mpic_alloc(np, r.start,
+ if (of_flat_dt_is_compatible(root, "fsl,85XXRDB-CAMP")) {
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY |
+ MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+ 0, 256, " OpenPIC ");
+ } else {
+ mpic = mpic_alloc(np, r.start,
MPIC_PRIMARY | MPIC_WANTS_RESET |
MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
+ }
BUG_ON(mpic == NULL);
of_node_put(np);
return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
}
machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices);
/*
* Called very early, device-tree isn't unflattened
return 0;
}
+static int __init p1020_rdb_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P1020RDB"))
+ return 1;
+ return 0;
+}
+
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
+
+define_machine(p1020_rdb) {
+ .name = "P1020 RDB",
+ .probe = p1020_rdb_probe,
+ .setup_arch = mpc85xx_rdb_setup_arch,
+ .init_IRQ = mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
--- /dev/null
+/*
+ * P4080 DS Setup
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "corenet_ds.h"
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p4080_ds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) {
+#ifdef CONFIG_PCI
+ /* treat PCIe1 as primary,
+ * shouldn't matter as we have no ISA on the board
+ */
+ primary_phb_addr = 0x0000;
+#endif
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+define_machine(p4080_ds) {
+ .name = "P4080 DS",
+ .probe = p4080_ds_probe,
+ .setup_arch = corenet_ds_setup_arch,
+ .init_IRQ = corenet_ds_pic_init,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_coreint_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};
+
+machine_device_initcall(p4080_ds, corenet_ds_publish_devices);
+machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier);
}
static struct irq_chip socrates_fpga_pic_chip = {
- .typename = " FPGA-PIC ",
+ .name = " FPGA-PIC ",
.ack = socrates_fpga_pic_ack,
.mask = socrates_fpga_pic_mask,
.mask_ack = socrates_fpga_pic_mask_ack,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
handle_fasteoi_irq);
config GEF_PPC9A
bool "GE Fanuc PPC9A"
select DEFAULT_UIMAGE
+ select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
config GEF_SBC310
bool "GE Fanuc SBC310"
select DEFAULT_UIMAGE
+ select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
config GEF_SBC610
bool "GE Fanuc SBC610"
select DEFAULT_UIMAGE
+ select MMIO_NVRAM
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAS_RAPIDIO
}
static struct irq_chip gef_pic_chip = {
- .typename = "gefp",
+ .name = "gefp",
.mask = gef_pic_mask,
.mask_ack = gef_pic_mask_ack,
.unmask = gef_pic_unmask,
irq_hw_number_t hwirq)
{
/* All interrupts are LEVEL sensitive */
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq);
return 0;
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
}
/* Return the PCB revision */
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
}
/* Return the PCB revision */
#include <asm/udbg.h>
#include <asm/mpic.h>
+#include <asm/nvram.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/fsl_soc.h>
printk(KERN_WARNING "Unable to map board registers\n");
of_node_put(regs);
}
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
}
/* Return the PCB revision */
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
+#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include "mpc86xx.h"
+static struct device_node *pixis_node;
static unsigned char *pixis_bdcfg0, *pixis_arch;
+#ifdef CONFIG_SUSPEND
+static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
+{
+ pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
+ return IRQ_HANDLED;
+}
+
+static void __init mpc8610_suspend_init(void)
+{
+ int irq;
+ int ret;
+
+ if (!pixis_node)
+ return;
+
+ irq = irq_of_parse_and_map(pixis_node, 0);
+ if (!irq) {
+ pr_err("%s: can't map pixis event IRQ.\n", __func__);
+ return;
+ }
+
+ ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL);
+ if (ret) {
+ pr_err("%s: can't request pixis event IRQ: %d\n",
+ __func__, ret);
+ irq_dispose_mapping(irq);
+ }
+
+ enable_irq_wake(irq);
+}
+#else
+static inline void mpc8610_suspend_init(void) { }
+#endif /* CONFIG_SUSPEND */
+
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
+ { .compatible = "fsl,mpc8610-guts", },
{ .compatible = "simple-bus", },
{ .compatible = "gianfar", },
{}
/* Firstly, register PIXIS GPIOs. */
simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
+ /* Enable wakeup on PIXIS' event IRQ. */
+ mpc8610_suspend_init();
+
/* Without this call, the SSI device driver won't get probed. */
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port;
#endif
- np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
- if (np) {
- of_address_to_resource(np, 0, &r);
- of_node_put(np);
+ pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+ if (pixis_node) {
+ of_address_to_resource(pixis_node, 0, &r);
+ of_node_put(pixis_node);
pixis = ioremap(r.start, 32);
if (!pixis) {
printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
int cascade_irq;
if ((cascade_irq = cpm_get_irq()) >= 0) {
- struct irq_desc *cdesc = irq_desc + cascade_irq;
+ struct irq_desc *cdesc = irq_to_desc(cascade_irq);
generic_handle_irq(cascade_irq);
cdesc->chip->eoi(cascade_irq);
depends on PPC_RTAS
default n
+config PPC_RTAS_DAEMON
+ bool
+ depends on PPC_RTAS
+ default n
+
config RTAS_PROC
bool "Proc interface to RTAS"
depends on PPC_RTAS
config CPM2
bool "Enable support for the CPM2 (Communications Processor Module)"
- depends on MPC85xx || 8260
+ depends on (FSL_SOC_BOOKE && PPC32) || 8260
select CPM
select PPC_LIB_RHEAP
select PPC_PCI_CHOICE
config MPC8xxx_GPIO
bool "MPC8xxx GPIO support"
- depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+ depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
help
config PPC_85xx
bool "Freescale 85xx"
select E500
- select FSL_SOC
- select MPC85xx
config PPC_8xx
bool "Freescale 8xx"
bool
default y if PPC64
+config FSL_EMB_PERFMON
+ bool "Freescale Embedded Perfmon"
+ depends on E500 || PPC_83xx
+ help
+ This is the Performance Monitor support found on the e500 core
+ and some e300 cores (c3 and c4). Select this only if your
+ core supports the Embedded Performance Monitor APU
+
config 4xx
bool
depends on 40x || 44x
depends on E200 || E500
default y
-config FSL_EMB_PERFMON
- bool "Freescale Embedded Perfmon"
- depends on E500 || PPC_83xx
- help
- This is the Performance Monitor support found on the e500 core
- and some e300 cores (c3 and c4). Select this only if your
- core supports the Embedded Performance Monitor APU
config PTE_64BIT
bool
obj-$(CONFIG_PPC_8xx) += 8xx/
obj-$(CONFIG_PPC_82xx) += 82xx/
obj-$(CONFIG_PPC_83xx) += 83xx/
-obj-$(CONFIG_PPC_85xx) += 85xx/
+obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/
obj-$(CONFIG_PPC_86xx) += 86xx/
obj-$(CONFIG_PPC_PSERIES) += pseries/
obj-$(CONFIG_PPC_ISERIES) += iseries/
.mask = mask_msi_irq,
.unmask = unmask_msi_irq,
.shutdown = unmask_msi_irq,
- .typename = "AXON-MSI",
+ .name = "AXON-MSI",
};
static int msic_host_map(struct irq_host *h, unsigned int virq,
}
static struct irq_chip beatic_pic = {
- .typename = " CELL-BEAT ",
+ .name = " CELL-BEAT ",
.unmask = beatic_unmask_irq,
.mask = beatic_mask_irq,
.eoi = beatic_end_irq,
static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
int64_t err;
err = beat_construct_and_connect_irq_plug(virq, hw);
}
static struct irq_chip iic_chip = {
- .typename = " CELL-IIC ",
+ .name = " CELL-IIC ",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_eoi,
static struct irq_chip iic_ioexc_chip = {
- .typename = " CELL-IOEX",
+ .name = " CELL-IOEX",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_ioexc_eoi,
/* Reset edge detection logic if necessary
*/
- if (get_irq_desc(virq)->status & IRQ_LEVEL)
+ if (irq_to_desc(virq)->status & IRQ_LEVEL)
return;
/* Only interrupts 47 to 50 can be set to edge */
struct spider_pic *pic = spider_virq_to_pic(virq);
unsigned int hw = irq_map[virq].hwirq;
void __iomem *cfg = spider_get_irq_config(pic, hw);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
u32 old_mask;
u32 ic;
}
static struct irq_chip spider_pic = {
- .typename = " SPIDER ",
+ .name = " SPIDER ",
.unmask = spider_unmask_irq,
.mask = spider_mask_irq,
.ack = spider_ack_irq,
struct spu_context *ctx = SPUFS_I(inode)->i_ctx;
int error = 0, cnt = 0;
- if (!buf || len < 0)
+ if (!buf)
return -EINVAL;
error = spu_acquire(ctx);
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_RTAS
+ select PPC_RTAS_DAEMON
+ select RTAS_ERROR_LOGGING
select PPC_MPC106
select PPC_UDBG_16550
select PPC_NATIVE
if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0);
}
-void
-chrp_event_scan(unsigned long unused)
-{
- unsigned char log[1024];
- int ret = 0;
-
- /* XXX: we should loop until the hardware says no more error logs -- Cort */
- rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0,
- __pa(log), 1024);
- mod_timer(&__get_cpu_var(heartbeat_timer),
- jiffies + event_scan_interval);
-}
-
static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc)
{
unsigned int cascade_irq = i8259_irq();
void __init
chrp_init2(void)
{
- struct device_node *device;
- const unsigned int *p = NULL;
-
#ifdef CONFIG_NVRAM
chrp_nvram_init();
#endif
request_region(0x80,0x10,"dma page reg");
request_region(0xc0,0x20,"dma2");
- /* Get the event scan rate for the rtas so we know how
- * often it expects a heartbeat. -- Cort
- */
- device = of_find_node_by_name(NULL, "rtas");
- if (device)
- p = of_get_property(device, "rtas-event-scan-rate", NULL);
- if (p && *p) {
- /*
- * Arrange to call chrp_event_scan at least *p times
- * per minute. We use 59 rather than 60 here so that
- * the rate will be slightly higher than the minimum.
- * This all assumes we don't do hotplug CPU on any
- * machine that needs the event scans done.
- */
- unsigned long interval, offset;
- int cpu, ncpus;
- struct timer_list *timer;
-
- interval = HZ * 59 / *p;
- offset = HZ;
- ncpus = num_online_cpus();
- event_scan_interval = ncpus * interval;
- for (cpu = 0; cpu < ncpus; ++cpu) {
- timer = &per_cpu(heartbeat_timer, cpu);
- setup_timer(timer, chrp_event_scan, 0);
- timer->expires = jiffies + offset;
- add_timer_on(timer, cpu);
- offset += interval;
- }
- printk("RTAS Event Scan Rate: %u (%lu jiffies)\n",
- *p, interval);
- }
- of_node_put(device);
-
if (ppc_md.progress)
ppc_md.progress(" Have fun! ", 0x7777);
}
#include "call_hpt.h"
-static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp =
- { [0 ... 63] = SPIN_LOCK_UNLOCKED};
+static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp;
/*
* Very primitive algorithm for picking up a lock
void __init hpte_init_iSeries(void)
{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(iSeries_hlocks); i++)
+ spin_lock_init(&iSeries_hlocks[i]);
+
ppc_md.hpte_invalidate = iSeries_hpte_invalidate;
ppc_md.hpte_updatepp = iSeries_hpte_updatepp;
ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp;
unsigned long flags;
for_each_irq (irq) {
- struct irq_desc *desc = get_irq_desc(irq);
+ struct irq_desc *desc = irq_to_desc(irq);
if (desc && desc->chip && desc->chip->startup) {
spin_lock_irqsave(&desc->lock, flags);
}
static struct irq_chip iseries_pic = {
- .typename = "iSeries irq controller",
+ .name = "iSeries irq controller",
.startup = iseries_startup_IRQ,
.shutdown = iseries_shutdown_IRQ,
.unmask = iseries_enable_IRQ,
unsigned long bit = 1UL << (src & 0x1f);
int i = src >> 5;
- spin_lock_irqsave(&pmac_pic_lock, flags);
- if ((irq_desc[virq].status & IRQ_LEVEL) == 0)
+ spin_lock_irqsave(&pmac_pic_lock, flags);
+ if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0)
out_le32(&pmac_irq_hw[i]->ack, bit);
__set_bit(src, ppc_cached_irq_mask);
__pmac_set_irq_mask(src, 0);
- spin_unlock_irqrestore(&pmac_pic_lock, flags);
+ spin_unlock_irqrestore(&pmac_pic_lock, flags);
return 0;
}
}
static struct irq_chip pmac_pic = {
- .typename = " PMAC-PIC ",
+ .name = " PMAC-PIC ",
.startup = pmac_startup_irq,
.mask = pmac_mask_irq,
.ack = pmac_ack_irq,
static int pmac_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
int level;
if (hw >= max_irqs)
*/
static struct irq_chip ps3_irq_chip = {
- .typename = "ps3",
+ .name = "ps3",
.mask = ps3_chip_mask,
.unmask = ps3_chip_unmask,
.eoi = ps3_chip_eoi,
#if defined(DEBUG)
#define DBG udbg_printf
#else
-#define DBG pr_debug
+#define DBG pr_devel
#endif
enum {
select MPIC
select PPC_I8259
select PPC_RTAS
+ select PPC_RTAS_DAEMON
select RTAS_ERROR_LOGGING
select PPC_UDBG_16550
select PPC_NATIVE
config CMM
tristate "Collaborative memory management"
- depends on PPC_SMLPAR && !CRASH_DUMP
+ depends on PPC_SMLPAR
default y
help
Select this option, if you want to enable the kernel interface
endif
obj-y := lpar.o hvCall.o nvram.o reconfig.o \
- setup.o iommu.o ras.o rtasd.o \
- firmware.o power.o
+ setup.o iommu.o ras.o \
+ firmware.o power.o dlpar.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
{
int rc;
struct hvcall_mpp_data mpp_data;
- unsigned long active_pages_target;
- signed long page_loan_request;
+ signed long active_pages_target, page_loan_request, target;
+ signed long total_pages = totalram_pages + loaned_pages;
+ signed long min_mem_pages = (min_mem_mb * 1024 * 1024) / PAGE_SIZE;
rc = h_get_mpp(&mpp_data);
return;
page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
- loaned_pages_target = page_loan_request + loaned_pages;
- if (loaned_pages_target > oom_freed_pages)
- loaned_pages_target -= oom_freed_pages;
+ target = page_loan_request + (signed long)loaned_pages;
+
+ if (target < 0 || total_pages < min_mem_pages)
+ target = 0;
+
+ if (target > oom_freed_pages)
+ target -= oom_freed_pages;
else
- loaned_pages_target = 0;
+ target = 0;
+
+ active_pages_target = total_pages - target;
+
+ if (min_mem_pages > active_pages_target)
+ target = total_pages - min_mem_pages;
- active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+ if (target < 0)
+ target = 0;
- if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
- loaned_pages_target = totalram_pages + loaned_pages -
- ((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+ loaned_pages_target = target;
cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
page_loan_request, loaned_pages, loaned_pages_target,
--- /dev/null
+/*
+ * Support for dynamic reconfiguration for PCI, Memory, and CPU
+ * Hotplug and Dynamic Logical Partitioning on RPA platforms.
+ *
+ * Copyright (C) 2009 Nathan Fontenot
+ * Copyright (C) 2009 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/notifier.h>
+#include <linux/proc_fs.h>
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include "offline_states.h"
+
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/rtas.h>
+#include <asm/pSeries_reconfig.h>
+
+struct cc_workarea {
+ u32 drc_index;
+ u32 zero;
+ u32 name_offset;
+ u32 prop_length;
+ u32 prop_offset;
+};
+
+static void dlpar_free_cc_property(struct property *prop)
+{
+ kfree(prop->name);
+ kfree(prop->value);
+ kfree(prop);
+}
+
+static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa)
+{
+ struct property *prop;
+ char *name;
+ char *value;
+
+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return NULL;
+
+ name = (char *)ccwa + ccwa->name_offset;
+ prop->name = kstrdup(name, GFP_KERNEL);
+
+ prop->length = ccwa->prop_length;
+ value = (char *)ccwa + ccwa->prop_offset;
+ prop->value = kzalloc(prop->length, GFP_KERNEL);
+ if (!prop->value) {
+ dlpar_free_cc_property(prop);
+ return NULL;
+ }
+
+ memcpy(prop->value, value, prop->length);
+ return prop;
+}
+
+static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa)
+{
+ struct device_node *dn;
+ char *name;
+
+ dn = kzalloc(sizeof(*dn), GFP_KERNEL);
+ if (!dn)
+ return NULL;
+
+ /* The configure connector reported name does not contain a
+ * preceeding '/', so we allocate a buffer large enough to
+ * prepend this to the full_name.
+ */
+ name = (char *)ccwa + ccwa->name_offset;
+ dn->full_name = kmalloc(strlen(name) + 2, GFP_KERNEL);
+ if (!dn->full_name) {
+ kfree(dn);
+ return NULL;
+ }
+
+ sprintf(dn->full_name, "/%s", name);
+ return dn;
+}
+
+static void dlpar_free_one_cc_node(struct device_node *dn)
+{
+ struct property *prop;
+
+ while (dn->properties) {
+ prop = dn->properties;
+ dn->properties = prop->next;
+ dlpar_free_cc_property(prop);
+ }
+
+ kfree(dn->full_name);
+ kfree(dn);
+}
+
+static void dlpar_free_cc_nodes(struct device_node *dn)
+{
+ if (dn->child)
+ dlpar_free_cc_nodes(dn->child);
+
+ if (dn->sibling)
+ dlpar_free_cc_nodes(dn->sibling);
+
+ dlpar_free_one_cc_node(dn);
+}
+
+#define NEXT_SIBLING 1
+#define NEXT_CHILD 2
+#define NEXT_PROPERTY 3
+#define PREV_PARENT 4
+#define MORE_MEMORY 5
+#define CALL_AGAIN -2
+#define ERR_CFG_USE -9003
+
+struct device_node *dlpar_configure_connector(u32 drc_index)
+{
+ struct device_node *dn;
+ struct device_node *first_dn = NULL;
+ struct device_node *last_dn = NULL;
+ struct property *property;
+ struct property *last_property = NULL;
+ struct cc_workarea *ccwa;
+ int cc_token;
+ int rc;
+
+ cc_token = rtas_token("ibm,configure-connector");
+ if (cc_token == RTAS_UNKNOWN_SERVICE)
+ return NULL;
+
+ spin_lock(&rtas_data_buf_lock);
+ ccwa = (struct cc_workarea *)&rtas_data_buf[0];
+ ccwa->drc_index = drc_index;
+ ccwa->zero = 0;
+
+ rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
+ while (rc) {
+ switch (rc) {
+ case NEXT_SIBLING:
+ dn = dlpar_parse_cc_node(ccwa);
+ if (!dn)
+ goto cc_error;
+
+ dn->parent = last_dn->parent;
+ last_dn->sibling = dn;
+ last_dn = dn;
+ break;
+
+ case NEXT_CHILD:
+ dn = dlpar_parse_cc_node(ccwa);
+ if (!dn)
+ goto cc_error;
+
+ if (!first_dn)
+ first_dn = dn;
+ else {
+ dn->parent = last_dn;
+ if (last_dn)
+ last_dn->child = dn;
+ }
+
+ last_dn = dn;
+ break;
+
+ case NEXT_PROPERTY:
+ property = dlpar_parse_cc_property(ccwa);
+ if (!property)
+ goto cc_error;
+
+ if (!last_dn->properties)
+ last_dn->properties = property;
+ else
+ last_property->next = property;
+
+ last_property = property;
+ break;
+
+ case PREV_PARENT:
+ last_dn = last_dn->parent;
+ break;
+
+ case CALL_AGAIN:
+ break;
+
+ case MORE_MEMORY:
+ case ERR_CFG_USE:
+ default:
+ printk(KERN_ERR "Unexpected Error (%d) "
+ "returned from configure-connector\n", rc);
+ goto cc_error;
+ }
+
+ rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL);
+ }
+
+ spin_unlock(&rtas_data_buf_lock);
+ return first_dn;
+
+cc_error:
+ if (first_dn)
+ dlpar_free_cc_nodes(first_dn);
+ spin_unlock(&rtas_data_buf_lock);
+ return NULL;
+}
+
+static struct device_node *derive_parent(const char *path)
+{
+ struct device_node *parent;
+ char *last_slash;
+
+ last_slash = strrchr(path, '/');
+ if (last_slash == path) {
+ parent = of_find_node_by_path("/");
+ } else {
+ char *parent_path;
+ int parent_path_len = last_slash - path + 1;
+ parent_path = kmalloc(parent_path_len, GFP_KERNEL);
+ if (!parent_path)
+ return NULL;
+
+ strlcpy(parent_path, path, parent_path_len);
+ parent = of_find_node_by_path(parent_path);
+ kfree(parent_path);
+ }
+
+ return parent;
+}
+
+int dlpar_attach_node(struct device_node *dn)
+{
+ struct proc_dir_entry *ent;
+ int rc;
+
+ of_node_set_flag(dn, OF_DYNAMIC);
+ kref_init(&dn->kref);
+ dn->parent = derive_parent(dn->full_name);
+ if (!dn->parent)
+ return -ENOMEM;
+
+ rc = blocking_notifier_call_chain(&pSeries_reconfig_chain,
+ PSERIES_RECONFIG_ADD, dn);
+ if (rc == NOTIFY_BAD) {
+ printk(KERN_ERR "Failed to add device node %s\n",
+ dn->full_name);
+ return -ENOMEM; /* For now, safe to assume kmalloc failure */
+ }
+
+ of_attach_node(dn);
+
+#ifdef CONFIG_PROC_DEVICETREE
+ ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde);
+ if (ent)
+ proc_device_tree_add_node(dn, ent);
+#endif
+
+ of_node_put(dn->parent);
+ return 0;
+}
+
+int dlpar_detach_node(struct device_node *dn)
+{
+ struct device_node *parent = dn->parent;
+ struct property *prop = dn->properties;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ while (prop) {
+ remove_proc_entry(prop->name, dn->pde);
+ prop = prop->next;
+ }
+
+ if (dn->pde)
+ remove_proc_entry(dn->pde->name, parent->pde);
+#endif
+
+ blocking_notifier_call_chain(&pSeries_reconfig_chain,
+ PSERIES_RECONFIG_REMOVE, dn);
+ of_detach_node(dn);
+ of_node_put(dn); /* Must decrement the refcount */
+
+ return 0;
+}
+
+int online_node_cpus(struct device_node *dn)
+{
+ int rc = 0;
+ unsigned int cpu;
+ int len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return -EINVAL;
+
+ nthreads = len / sizeof(u32);
+
+ cpu_maps_update_begin();
+ for (i = 0; i < nthreads; i++) {
+ for_each_present_cpu(cpu) {
+ if (get_hard_smp_processor_id(cpu) != intserv[i])
+ continue;
+ BUG_ON(get_cpu_current_state(cpu)
+ != CPU_STATE_OFFLINE);
+ cpu_maps_update_done();
+ rc = cpu_up(cpu);
+ if (rc)
+ goto out;
+ cpu_maps_update_begin();
+
+ break;
+ }
+ if (cpu == num_possible_cpus())
+ printk(KERN_WARNING "Could not find cpu to online "
+ "with physical id 0x%x\n", intserv[i]);
+ }
+ cpu_maps_update_done();
+
+out:
+ return rc;
+
+}
+
+int offline_node_cpus(struct device_node *dn)
+{
+ int rc = 0;
+ unsigned int cpu;
+ int len, nthreads, i;
+ const u32 *intserv;
+
+ intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ return -EINVAL;
+
+ nthreads = len / sizeof(u32);
+
+ cpu_maps_update_begin();
+ for (i = 0; i < nthreads; i++) {
+ for_each_present_cpu(cpu) {
+ if (get_hard_smp_processor_id(cpu) != intserv[i])
+ continue;
+
+ if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE)
+ break;
+
+ if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
+ cpu_maps_update_done();
+ rc = cpu_down(cpu);
+ if (rc)
+ goto out;
+ cpu_maps_update_begin();
+ break;
+
+ }
+
+ /*
+ * The cpu is in CPU_STATE_INACTIVE.
+ * Upgrade it's state to CPU_STATE_OFFLINE.
+ */
+ set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
+ BUG_ON(plpar_hcall_norets(H_PROD, intserv[i])
+ != H_SUCCESS);
+ __cpu_die(cpu);
+ break;
+ }
+ if (cpu == num_possible_cpus())
+ printk(KERN_WARNING "Could not find cpu to offline "
+ "with physical id 0x%x\n", intserv[i]);
+ }
+ cpu_maps_update_done();
+
+out:
+ return rc;
+
+}
+
+#define DR_ENTITY_SENSE 9003
+#define DR_ENTITY_PRESENT 1
+#define DR_ENTITY_UNUSABLE 2
+#define ALLOCATION_STATE 9003
+#define ALLOC_UNUSABLE 0
+#define ALLOC_USABLE 1
+#define ISOLATION_STATE 9001
+#define ISOLATE 0
+#define UNISOLATE 1
+
+int dlpar_acquire_drc(u32 drc_index)
+{
+ int dr_status, rc;
+
+ rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
+ DR_ENTITY_SENSE, drc_index);
+ if (rc || dr_status != DR_ENTITY_UNUSABLE)
+ return -1;
+
+ rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE);
+ if (rc)
+ return rc;
+
+ rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
+ if (rc) {
+ rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
+ return rc;
+ }
+
+ return 0;
+}
+
+int dlpar_release_drc(u32 drc_index)
+{
+ int dr_status, rc;
+
+ rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
+ DR_ENTITY_SENSE, drc_index);
+ if (rc || dr_status != DR_ENTITY_PRESENT)
+ return -1;
+
+ rc = rtas_set_indicator(ISOLATION_STATE, drc_index, ISOLATE);
+ if (rc)
+ return rc;
+
+ rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE);
+ if (rc) {
+ rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
+ return rc;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+
+static DEFINE_MUTEX(pseries_cpu_hotplug_mutex);
+
+void cpu_hotplug_driver_lock()
+{
+ mutex_lock(&pseries_cpu_hotplug_mutex);
+}
+
+void cpu_hotplug_driver_unlock()
+{
+ mutex_unlock(&pseries_cpu_hotplug_mutex);
+}
+
+static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
+{
+ struct device_node *dn;
+ unsigned long drc_index;
+ char *cpu_name;
+ int rc;
+
+ cpu_hotplug_driver_lock();
+ rc = strict_strtoul(buf, 0, &drc_index);
+ if (rc) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ dn = dlpar_configure_connector(drc_index);
+ if (!dn) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* configure-connector reports cpus as living in the base
+ * directory of the device tree. CPUs actually live in the
+ * cpus directory so we need to fixup the full_name.
+ */
+ cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus") + 1,
+ GFP_KERNEL);
+ if (!cpu_name) {
+ dlpar_free_cc_nodes(dn);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ sprintf(cpu_name, "/cpus%s", dn->full_name);
+ kfree(dn->full_name);
+ dn->full_name = cpu_name;
+
+ rc = dlpar_acquire_drc(drc_index);
+ if (rc) {
+ dlpar_free_cc_nodes(dn);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rc = dlpar_attach_node(dn);
+ if (rc) {
+ dlpar_release_drc(drc_index);
+ dlpar_free_cc_nodes(dn);
+ }
+
+ rc = online_node_cpus(dn);
+out:
+ cpu_hotplug_driver_unlock();
+
+ return rc ? rc : count;
+}
+
+static ssize_t dlpar_cpu_release(const char *buf, size_t count)
+{
+ struct device_node *dn;
+ const u32 *drc_index;
+ int rc;
+
+ dn = of_find_node_by_path(buf);
+ if (!dn)
+ return -EINVAL;
+
+ drc_index = of_get_property(dn, "ibm,my-drc-index", NULL);
+ if (!drc_index) {
+ of_node_put(dn);
+ return -EINVAL;
+ }
+
+ cpu_hotplug_driver_lock();
+ rc = offline_node_cpus(dn);
+ if (rc) {
+ of_node_put(dn);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ rc = dlpar_release_drc(*drc_index);
+ if (rc) {
+ of_node_put(dn);
+ goto out;
+ }
+
+ rc = dlpar_detach_node(dn);
+ if (rc) {
+ dlpar_acquire_drc(*drc_index);
+ goto out;
+ }
+
+ of_node_put(dn);
+out:
+ cpu_hotplug_driver_unlock();
+ return rc ? rc : count;
+}
+
+static int __init pseries_dlpar_init(void)
+{
+ ppc_md.cpu_probe = dlpar_cpu_probe;
+ ppc_md.cpu_release = dlpar_cpu_release;
+
+ return 0;
+}
+machine_device_initcall(pseries, pseries_dlpar_init);
+
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
}
#endif
-/**
- * irq_in_use - return true if this irq is being used
- */
-static int irq_in_use(unsigned int irq)
-{
- int rc = 0;
- unsigned long flags;
- struct irq_desc *desc = irq_desc + irq;
-
- spin_lock_irqsave(&desc->lock, flags);
- if (desc->action)
- rc = 1;
- spin_unlock_irqrestore(&desc->lock, flags);
- return rc;
-}
-
/**
* eeh_disable_irq - disable interrupt for the recovering device
*/
if (dev->msi_enabled || dev->msix_enabled)
return;
- if (!irq_in_use(dev->irq))
+ if (!irq_has_action(dev->irq))
return;
PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED;
#include <asm/pSeries_reconfig.h>
#include "xics.h"
#include "plpar_wrappers.h"
+#include "offline_states.h"
/* This version can't take the spinlock, because it never returns */
static struct rtas_args rtas_stop_self_args = {
.rets = &rtas_stop_self_args.args[0],
};
+static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) =
+ CPU_STATE_OFFLINE;
+static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE;
+
+static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE;
+
+static int cede_offline_enabled __read_mostly = 1;
+
+/*
+ * Enable/disable cede_offline when available.
+ */
+static int __init setup_cede_offline(char *str)
+{
+ if (!strcmp(str, "off"))
+ cede_offline_enabled = 0;
+ else if (!strcmp(str, "on"))
+ cede_offline_enabled = 1;
+ else
+ return 0;
+ return 1;
+}
+
+__setup("cede_offline=", setup_cede_offline);
+
+enum cpu_state_vals get_cpu_current_state(int cpu)
+{
+ return per_cpu(current_state, cpu);
+}
+
+void set_cpu_current_state(int cpu, enum cpu_state_vals state)
+{
+ per_cpu(current_state, cpu) = state;
+}
+
+enum cpu_state_vals get_preferred_offline_state(int cpu)
+{
+ return per_cpu(preferred_offline_state, cpu);
+}
+
+void set_preferred_offline_state(int cpu, enum cpu_state_vals state)
+{
+ per_cpu(preferred_offline_state, cpu) = state;
+}
+
+void set_default_offline_state(int cpu)
+{
+ per_cpu(preferred_offline_state, cpu) = default_offline_state;
+}
+
static void rtas_stop_self(void)
{
struct rtas_args *args = &rtas_stop_self_args;
static void pseries_mach_cpu_die(void)
{
+ unsigned int cpu = smp_processor_id();
+ unsigned int hwcpu = hard_smp_processor_id();
+ u8 cede_latency_hint = 0;
+
local_irq_disable();
idle_task_exit();
xics_teardown_cpu();
- unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow()));
- rtas_stop_self();
+
+ if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+ set_cpu_current_state(cpu, CPU_STATE_INACTIVE);
+ cede_latency_hint = 2;
+
+ get_lppaca()->idle = 1;
+ if (!get_lppaca()->shared_proc)
+ get_lppaca()->donate_dedicated_cpu = 1;
+
+ printk(KERN_INFO
+ "cpu %u (hwid %u) ceding for offline with hint %d\n",
+ cpu, hwcpu, cede_latency_hint);
+ while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+ extended_cede_processor(cede_latency_hint);
+ printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n",
+ cpu, hwcpu);
+ printk(KERN_INFO
+ "Decrementer value = %x Timebase value = %llx\n",
+ get_dec(), get_tb());
+ }
+
+ printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n",
+ cpu, hwcpu);
+
+ if (!get_lppaca()->shared_proc)
+ get_lppaca()->donate_dedicated_cpu = 0;
+ get_lppaca()->idle = 0;
+ }
+
+ if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) {
+ unregister_slb_shadow(hwcpu, __pa(get_slb_shadow()));
+
+ /*
+ * NOTE: Calling start_secondary() here for now to
+ * start new context.
+ * However, need to do it cleanly by resetting the
+ * stack pointer.
+ */
+ start_secondary();
+
+ } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+
+ set_cpu_current_state(cpu, CPU_STATE_OFFLINE);
+ unregister_slb_shadow(hard_smp_processor_id(),
+ __pa(get_slb_shadow()));
+ rtas_stop_self();
+ }
+
/* Should never get here... */
BUG();
for(;;);
return 0;
}
+/*
+ * pseries_cpu_die: Wait for the cpu to die.
+ * @cpu: logical processor id of the CPU whose death we're awaiting.
+ *
+ * This function is called from the context of the thread which is performing
+ * the cpu-offline. Here we wait for long enough to allow the cpu in question
+ * to self-destroy so that the cpu-offline thread can send the CPU_DEAD
+ * notifications.
+ *
+ * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to
+ * self-destruct.
+ */
static void pseries_cpu_die(unsigned int cpu)
{
int tries;
- int cpu_status;
+ int cpu_status = 1;
unsigned int pcpu = get_hard_smp_processor_id(cpu);
- for (tries = 0; tries < 25; tries++) {
- cpu_status = query_cpu_stopped(pcpu);
- if (cpu_status == 0 || cpu_status == -1)
- break;
- cpu_relax();
+ if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) {
+ cpu_status = 1;
+ for (tries = 0; tries < 1000; tries++) {
+ if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) {
+ cpu_status = 0;
+ break;
+ }
+ cpu_relax();
+ }
+ } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) {
+
+ for (tries = 0; tries < 25; tries++) {
+ cpu_status = query_cpu_stopped(pcpu);
+ if (cpu_status == 0 || cpu_status == -1)
+ break;
+ cpu_relax();
+ }
}
+
if (cpu_status != 0) {
printk("Querying DEAD? cpu %i (%i) shows %i\n",
cpu, pcpu, cpu_status);
.notifier_call = pseries_smp_notifier,
};
+#define MAX_CEDE_LATENCY_LEVELS 4
+#define CEDE_LATENCY_PARAM_LENGTH 10
+#define CEDE_LATENCY_PARAM_MAX_LENGTH \
+ (MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char))
+#define CEDE_LATENCY_TOKEN 45
+
+static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH];
+
+static int parse_cede_parameters(void)
+{
+ int call_status;
+
+ memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH);
+ call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+ NULL,
+ CEDE_LATENCY_TOKEN,
+ __pa(cede_parameters),
+ CEDE_LATENCY_PARAM_MAX_LENGTH);
+
+ if (call_status != 0)
+ printk(KERN_INFO "CEDE_LATENCY: \
+ %s %s Error calling get-system-parameter(0x%x)\n",
+ __FILE__, __func__, call_status);
+ else
+ printk(KERN_INFO "CEDE_LATENCY: \
+ get-system-parameter successful.\n");
+
+ return call_status;
+}
+
static int __init pseries_cpu_hotplug_init(void)
{
struct device_node *np;
const char *typep;
+ int cpu;
for_each_node_by_name(np, "interrupt-controller") {
typep = of_get_property(np, "compatible", NULL);
smp_ops->cpu_die = pseries_cpu_die;
/* Processors can be added/removed only on LPAR */
- if (firmware_has_feature(FW_FEATURE_LPAR))
+ if (firmware_has_feature(FW_FEATURE_LPAR)) {
pSeries_reconfig_notifier_register(&pseries_smp_nb);
+ cpu_maps_update_begin();
+ if (cede_offline_enabled && parse_cede_parameters() == 0) {
+ default_offline_state = CPU_STATE_INACTIVE;
+ for_each_online_cpu(cpu)
+ set_default_offline_state(cpu);
+ }
+ cpu_maps_update_done();
+ }
return 0;
}
/* Read config space back so we can restore after reset */
read_msi_msg(virq, &msg);
entry->msg = msg;
-
- unmask_msi_irq(virq);
}
return 0;
--- /dev/null
+#ifndef _OFFLINE_STATES_H_
+#define _OFFLINE_STATES_H_
+
+/* Cpu offline states go here */
+enum cpu_state_vals {
+ CPU_STATE_OFFLINE,
+ CPU_STATE_INACTIVE,
+ CPU_STATE_ONLINE,
+ CPU_MAX_OFFLINE_STATES
+};
+
+extern enum cpu_state_vals get_cpu_current_state(int cpu);
+extern void set_cpu_current_state(int cpu, enum cpu_state_vals state);
+extern enum cpu_state_vals get_preferred_offline_state(int cpu);
+extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state);
+extern void set_default_offline_state(int cpu);
+extern int start_secondary(void);
+#endif
return plpar_hcall_norets(H_POLL_PENDING);
}
+static inline u8 get_cede_latency_hint(void)
+{
+ return get_lppaca()->gpr5_dword.fields.cede_latency_hint;
+}
+
+static inline void set_cede_latency_hint(u8 latency_hint)
+{
+ get_lppaca()->gpr5_dword.fields.cede_latency_hint = latency_hint;
+}
+
static inline long cede_processor(void)
{
return plpar_hcall_norets(H_CEDE);
}
+static inline long extended_cede_processor(unsigned long latency_hint)
+{
+ long rc;
+ u8 old_latency_hint = get_cede_latency_hint();
+
+ set_cede_latency_hint(latency_hint);
+ rc = cede_processor();
+ set_cede_latency_hint(old_latency_hint);
+
+ return rc;
+}
+
static inline long vpa_call(unsigned long flags, unsigned long cpu,
unsigned long vpa)
{
return parent;
}
-static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
+BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain);
int pSeries_reconfig_notifier_register(struct notifier_block *nb)
{
}
/*
- * /proc/ppc64/ofdt - yucky binary interface for adding and removing
+ * /proc/powerpc/ofdt - yucky binary interface for adding and removing
* OF device nodes. Should be deprecated as soon as we get an
* in-kernel wrapper for the RTAS ibm,configure-connector call.
*/
.write = ofdt_write
};
-/* create /proc/ppc64/ofdt write-only by root */
+/* create /proc/powerpc/ofdt write-only by root */
static int proc_ppc64_create_ofdt(void)
{
struct proc_dir_entry *ent;
if (!machine_is(pseries))
return 0;
- ent = proc_create("ppc64/ofdt", S_IWUSR, NULL, &ofdt_fops);
+ ent = proc_create("powerpc/ofdt", S_IWUSR, NULL, &ofdt_fops);
if (ent)
ent->size = 0;
+++ /dev/null
-/*
- * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Communication to userspace based on kernel/printk.c
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/spinlock.h>
-#include <linux/cpu.h>
-#include <linux/workqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/rtas.h>
-#include <asm/prom.h>
-#include <asm/nvram.h>
-#include <asm/atomic.h>
-#include <asm/machdep.h>
-
-
-static DEFINE_SPINLOCK(rtasd_log_lock);
-
-static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
-
-static char *rtas_log_buf;
-static unsigned long rtas_log_start;
-static unsigned long rtas_log_size;
-
-static int surveillance_timeout = -1;
-static unsigned int rtas_error_log_max;
-static unsigned int rtas_error_log_buffer_max;
-
-/* RTAS service tokens */
-static unsigned int event_scan;
-static unsigned int rtas_event_scan_rate;
-
-static int full_rtas_msgs = 0;
-
-/* Stop logging to nvram after first fatal error */
-static int logging_enabled; /* Until we initialize everything,
- * make sure we don't try logging
- * anything */
-static int error_log_cnt;
-
-/*
- * Since we use 32 bit RTAS, the physical address of this must be below
- * 4G or else bad things happen. Allocate this in the kernel data and
- * make it big enough.
- */
-static unsigned char logdata[RTAS_ERROR_LOG_MAX];
-
-static char *rtas_type[] = {
- "Unknown", "Retry", "TCE Error", "Internal Device Failure",
- "Timeout", "Data Parity", "Address Parity", "Cache Parity",
- "Address Invalid", "ECC Uncorrected", "ECC Corrupted",
-};
-
-static char *rtas_event_type(int type)
-{
- if ((type > 0) && (type < 11))
- return rtas_type[type];
-
- switch (type) {
- case RTAS_TYPE_EPOW:
- return "EPOW";
- case RTAS_TYPE_PLATFORM:
- return "Platform Error";
- case RTAS_TYPE_IO:
- return "I/O Event";
- case RTAS_TYPE_INFO:
- return "Platform Information Event";
- case RTAS_TYPE_DEALLOC:
- return "Resource Deallocation Event";
- case RTAS_TYPE_DUMP:
- return "Dump Notification Event";
- }
-
- return rtas_type[0];
-}
-
-/* To see this info, grep RTAS /var/log/messages and each entry
- * will be collected together with obvious begin/end.
- * There will be a unique identifier on the begin and end lines.
- * This will persist across reboots.
- *
- * format of error logs returned from RTAS:
- * bytes (size) : contents
- * --------------------------------------------------------
- * 0-7 (8) : rtas_error_log
- * 8-47 (40) : extended info
- * 48-51 (4) : vendor id
- * 52-1023 (vendor specific) : location code and debug data
- */
-static void printk_log_rtas(char *buf, int len)
-{
-
- int i,j,n = 0;
- int perline = 16;
- char buffer[64];
- char * str = "RTAS event";
-
- if (full_rtas_msgs) {
- printk(RTAS_DEBUG "%d -------- %s begin --------\n",
- error_log_cnt, str);
-
- /*
- * Print perline bytes on each line, each line will start
- * with RTAS and a changing number, so syslogd will
- * print lines that are otherwise the same. Separate every
- * 4 bytes with a space.
- */
- for (i = 0; i < len; i++) {
- j = i % perline;
- if (j == 0) {
- memset(buffer, 0, sizeof(buffer));
- n = sprintf(buffer, "RTAS %d:", i/perline);
- }
-
- if ((i % 4) == 0)
- n += sprintf(buffer+n, " ");
-
- n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]);
-
- if (j == (perline-1))
- printk(KERN_DEBUG "%s\n", buffer);
- }
- if ((i % perline) != 0)
- printk(KERN_DEBUG "%s\n", buffer);
-
- printk(RTAS_DEBUG "%d -------- %s end ----------\n",
- error_log_cnt, str);
- } else {
- struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
-
- printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n",
- error_log_cnt, rtas_event_type(errlog->type),
- errlog->severity);
- }
-}
-
-static int log_rtas_len(char * buf)
-{
- int len;
- struct rtas_error_log *err;
-
- /* rtas fixed header */
- len = 8;
- err = (struct rtas_error_log *)buf;
- if (err->extended_log_length) {
-
- /* extended header */
- len += err->extended_log_length;
- }
-
- if (rtas_error_log_max == 0)
- rtas_error_log_max = rtas_get_error_log_max();
-
- if (len > rtas_error_log_max)
- len = rtas_error_log_max;
-
- return len;
-}
-
-/*
- * First write to nvram, if fatal error, that is the only
- * place we log the info. The error will be picked up
- * on the next reboot by rtasd. If not fatal, run the
- * method for the type of error. Currently, only RTAS
- * errors have methods implemented, but in the future
- * there might be a need to store data in nvram before a
- * call to panic().
- *
- * XXX We write to nvram periodically, to indicate error has
- * been written and sync'd, but there is a possibility
- * that if we don't shutdown correctly, a duplicate error
- * record will be created on next reboot.
- */
-void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
-{
- unsigned long offset;
- unsigned long s;
- int len = 0;
-
- pr_debug("rtasd: logging event\n");
- if (buf == NULL)
- return;
-
- spin_lock_irqsave(&rtasd_log_lock, s);
-
- /* get length and increase count */
- switch (err_type & ERR_TYPE_MASK) {
- case ERR_TYPE_RTAS_LOG:
- len = log_rtas_len(buf);
- if (!(err_type & ERR_FLAG_BOOT))
- error_log_cnt++;
- break;
- case ERR_TYPE_KERNEL_PANIC:
- default:
- WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- return;
- }
-
- /* Write error to NVRAM */
- if (logging_enabled && !(err_type & ERR_FLAG_BOOT))
- nvram_write_error_log(buf, len, err_type, error_log_cnt);
-
- /*
- * rtas errors can occur during boot, and we do want to capture
- * those somewhere, even if nvram isn't ready (why not?), and even
- * if rtasd isn't ready. Put them into the boot log, at least.
- */
- if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG)
- printk_log_rtas(buf, len);
-
- /* Check to see if we need to or have stopped logging */
- if (fatal || !logging_enabled) {
- logging_enabled = 0;
- WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- return;
- }
-
- /* call type specific method for error */
- switch (err_type & ERR_TYPE_MASK) {
- case ERR_TYPE_RTAS_LOG:
- offset = rtas_error_log_buffer_max *
- ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK);
-
- /* First copy over sequence number */
- memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int));
-
- /* Second copy over error log data */
- offset += sizeof(int);
- memcpy(&rtas_log_buf[offset], buf, len);
-
- if (rtas_log_size < LOG_NUMBER)
- rtas_log_size += 1;
- else
- rtas_log_start += 1;
-
- WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- wake_up_interruptible(&rtas_log_wait);
- break;
- case ERR_TYPE_KERNEL_PANIC:
- default:
- WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- return;
- }
-
-}
-
-
-static int rtas_log_open(struct inode * inode, struct file * file)
-{
- return 0;
-}
-
-static int rtas_log_release(struct inode * inode, struct file * file)
-{
- return 0;
-}
-
-/* This will check if all events are logged, if they are then, we
- * know that we can safely clear the events in NVRAM.
- * Next we'll sit and wait for something else to log.
- */
-static ssize_t rtas_log_read(struct file * file, char __user * buf,
- size_t count, loff_t *ppos)
-{
- int error;
- char *tmp;
- unsigned long s;
- unsigned long offset;
-
- if (!buf || count < rtas_error_log_buffer_max)
- return -EINVAL;
-
- count = rtas_error_log_buffer_max;
-
- if (!access_ok(VERIFY_WRITE, buf, count))
- return -EFAULT;
-
- tmp = kmalloc(count, GFP_KERNEL);
- if (!tmp)
- return -ENOMEM;
-
- spin_lock_irqsave(&rtasd_log_lock, s);
- /* if it's 0, then we know we got the last one (the one in NVRAM) */
- while (rtas_log_size == 0) {
- if (file->f_flags & O_NONBLOCK) {
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- error = -EAGAIN;
- goto out;
- }
-
- if (!logging_enabled) {
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- error = -ENODATA;
- goto out;
- }
- nvram_clear_error_log();
-
- spin_unlock_irqrestore(&rtasd_log_lock, s);
- error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
- if (error)
- goto out;
- spin_lock_irqsave(&rtasd_log_lock, s);
- }
-
- offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
- memcpy(tmp, &rtas_log_buf[offset], count);
-
- rtas_log_start += 1;
- rtas_log_size -= 1;
- spin_unlock_irqrestore(&rtasd_log_lock, s);
-
- error = copy_to_user(buf, tmp, count) ? -EFAULT : count;
-out:
- kfree(tmp);
- return error;
-}
-
-static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
-{
- poll_wait(file, &rtas_log_wait, wait);
- if (rtas_log_size)
- return POLLIN | POLLRDNORM;
- return 0;
-}
-
-static const struct file_operations proc_rtas_log_operations = {
- .read = rtas_log_read,
- .poll = rtas_log_poll,
- .open = rtas_log_open,
- .release = rtas_log_release,
-};
-
-static int enable_surveillance(int timeout)
-{
- int error;
-
- error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout);
-
- if (error == 0)
- return 0;
-
- if (error == -EINVAL) {
- printk(KERN_DEBUG "rtasd: surveillance not supported\n");
- return 0;
- }
-
- printk(KERN_ERR "rtasd: could not update surveillance\n");
- return -1;
-}
-
-static void do_event_scan(void)
-{
- int error;
- do {
- memset(logdata, 0, rtas_error_log_max);
- error = rtas_call(event_scan, 4, 1, NULL,
- RTAS_EVENT_SCAN_ALL_EVENTS, 0,
- __pa(logdata), rtas_error_log_max);
- if (error == -1) {
- printk(KERN_ERR "event-scan failed\n");
- break;
- }
-
- if (error == 0)
- pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0);
-
- } while(error == 0);
-}
-
-static void rtas_event_scan(struct work_struct *w);
-DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
-
-/*
- * Delay should be at least one second since some machines have problems if
- * we call event-scan too quickly.
- */
-static unsigned long event_scan_delay = 1*HZ;
-static int first_pass = 1;
-
-static void rtas_event_scan(struct work_struct *w)
-{
- unsigned int cpu;
-
- do_event_scan();
-
- get_online_cpus();
-
- cpu = next_cpu(smp_processor_id(), cpu_online_map);
- if (cpu == NR_CPUS) {
- cpu = first_cpu(cpu_online_map);
-
- if (first_pass) {
- first_pass = 0;
- event_scan_delay = 30*HZ/rtas_event_scan_rate;
-
- if (surveillance_timeout != -1) {
- pr_debug("rtasd: enabling surveillance\n");
- enable_surveillance(surveillance_timeout);
- pr_debug("rtasd: surveillance enabled\n");
- }
- }
- }
-
- schedule_delayed_work_on(cpu, &event_scan_work,
- __round_jiffies_relative(event_scan_delay, cpu));
-
- put_online_cpus();
-}
-
-static void start_event_scan(void)
-{
- unsigned int err_type;
- int rc;
-
- printk(KERN_DEBUG "RTAS daemon started\n");
- pr_debug("rtasd: will sleep for %d milliseconds\n",
- (30000 / rtas_event_scan_rate));
-
- /* See if we have any error stored in NVRAM */
- memset(logdata, 0, rtas_error_log_max);
- rc = nvram_read_error_log(logdata, rtas_error_log_max,
- &err_type, &error_log_cnt);
- /* We can use rtas_log_buf now */
- logging_enabled = 1;
-
- if (!rc) {
- if (err_type != ERR_FLAG_ALREADY_LOGGED) {
- pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
- }
- }
-
- schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
- event_scan_delay);
-}
-
-static int __init rtas_init(void)
-{
- struct proc_dir_entry *entry;
-
- if (!machine_is(pseries))
- return 0;
-
- /* No RTAS */
- event_scan = rtas_token("event-scan");
- if (event_scan == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_DEBUG "rtasd: no event-scan on system\n");
- return -ENODEV;
- }
-
- rtas_event_scan_rate = rtas_token("rtas-event-scan-rate");
- if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n");
- return -ENODEV;
- }
-
- /* Make room for the sequence number */
- rtas_error_log_max = rtas_get_error_log_max();
- rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
-
- rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER);
- if (!rtas_log_buf) {
- printk(KERN_ERR "rtasd: no memory\n");
- return -ENOMEM;
- }
-
- entry = proc_create("ppc64/rtas/error_log", S_IRUSR, NULL,
- &proc_rtas_log_operations);
- if (!entry)
- printk(KERN_ERR "Failed to create error_log proc entry\n");
-
- start_event_scan();
-
- return 0;
-}
-
-static int __init surveillance_setup(char *str)
-{
- int i;
-
- if (get_option(&str,&i)) {
- if (i >= 0 && i <= 255)
- surveillance_timeout = i;
- }
-
- return 1;
-}
-
-static int __init rtasmsgs_setup(char *str)
-{
- if (strcmp(str, "on") == 0)
- full_rtas_msgs = 1;
- else if (strcmp(str, "off") == 0)
- full_rtas_msgs = 0;
-
- return 1;
-}
-__initcall(rtas_init);
-__setup("surveillance=", surveillance_setup);
-__setup("rtasmsgs=", rtasmsgs_setup);
* of this data using this driver. A dump exists if the device-tree
* /chosen/ibm,scan-log-data property exists.
*
- * This driver exports /proc/ppc64/scan-log-dump which can be read.
+ * This driver exports /proc/powerpc/scan-log-dump which can be read.
* The driver supports only sequential reads.
*
* The driver looks at a write to the driver for the single word "reset".
if (!data)
goto err;
- ent = proc_create_data("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+ ent = proc_create_data("powerpc/rtas/scan-log-dump", S_IRUSR, NULL,
&scanlog_fops, data);
if (!ent)
goto err;
#include "plpar_wrappers.h"
#include "pseries.h"
#include "xics.h"
+#include "offline_states.h"
/*
/* Fixup atomic count: it exited inside IRQ handler. */
task_thread_info(paca[lcpu].__current)->preempt_count = 0;
+ if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
+ goto out;
+
/*
* If the RTAS start-cpu token does not exist then presume the
* cpu is already spinning.
return 0;
}
+out:
return 1;
}
vpa_init(cpu);
cpu_clear(cpu, of_spin_map);
+ set_cpu_current_state(cpu, CPU_STATE_ONLINE);
+ set_default_offline_state(cpu);
}
#endif /* CONFIG_XICS */
static void __devinit smp_pSeries_kick_cpu(int nr)
{
+ long rc;
+ unsigned long hcpuid;
BUG_ON(nr < 0 || nr >= NR_CPUS);
if (!smp_startup_cpu(nr))
* the processor will continue on to secondary_start
*/
paca[nr].cpu_start = 1;
+
+ set_preferred_offline_state(nr, CPU_STATE_ONLINE);
+
+ if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
+ hcpuid = get_hard_smp_processor_id(nr);
+ rc = plpar_hcall_norets(H_PROD, hcpuid);
+ if (rc != H_SUCCESS)
+ panic("Error: Prod to wake up processor %d Ret= %ld\n",
+ nr, rc);
+ }
}
static int smp_pSeries_cpu_bootable(unsigned int nr)
#include <linux/init.h>
#include <linux/radix-tree.h>
#include <linux/cpu.h>
+#include <linux/msi.h>
#include <linux/of.h>
#include <asm/firmware.h>
cpumask_t cpumask;
cpumask_t tmp = CPU_MASK_NONE;
- cpumask_copy(&cpumask, irq_desc[virq].affinity);
+ cpumask_copy(&cpumask, irq_to_desc(virq)->affinity);
if (!distribute_irqs)
return default_server;
static unsigned int xics_startup(unsigned int virq)
{
+ /*
+ * The generic MSI code returns with the interrupt disabled on the
+ * card, using the MSI mask bits. Firmware doesn't appear to unmask
+ * at that level, so we do it here by hand.
+ */
+ if (irq_to_desc(virq)->msi_desc)
+ unmask_msi_irq(virq);
+
/* unmask it */
xics_unmask_irq(virq);
return 0;
}
static struct irq_chip xics_pic_direct = {
- .typename = " XICS ",
+ .name = " XICS ",
.startup = xics_startup,
.mask = xics_mask_irq,
.unmask = xics_unmask_irq,
};
static struct irq_chip xics_pic_lpar = {
- .typename = " XICS ",
+ .name = " XICS ",
.startup = xics_startup,
.mask = xics_mask_irq,
.unmask = xics_unmask_irq,
/* Insert the interrupt mapping into the radix tree for fast lookup */
irq_radix_revmap_insert(xics_host, virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
return 0;
}
/* We need to get IPIs still. */
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
continue;
- desc = get_irq_desc(virq);
+ desc = irq_to_desc(virq);
/* We only need to migrate enabled IRQS */
if (desc == NULL || desc->chip == NULL
virq, cpu);
/* Reset affinity to all cpus */
- cpumask_setall(irq_desc[virq].affinity);
+ cpumask_setall(irq_to_desc(virq)->affinity);
desc->chip->set_affinity(virq, cpu_all_mask);
unlock:
spin_unlock_irqrestore(&desc->lock, flags);
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y)
+obj-$(CONFIG_FSL_PMC) += fsl_pmc.o
obj-$(CONFIG_FSL_LBC) += fsl_lbc.o
obj-$(CONFIG_FSL_GTM) += fsl_gtm.o
obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o
}
static struct irq_chip cpm_pic = {
- .typename = " CPM PIC ",
+ .name = " CPM PIC ",
.mask = cpm_mask_irq,
.unmask = cpm_unmask_irq,
.eoi = cpm_end_irq,
{
pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
return 0;
}
static void cpm2_end_irq(unsigned int virq)
{
+ struct irq_desc *desc;
int bit, word;
unsigned int irq_nr = virq_to_hw(virq);
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
- && irq_desc[irq_nr].action) {
+ desc = irq_to_desc(irq_nr);
+ if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS))
+ && desc->action) {
bit = irq_to_siubit[irq_nr];
word = irq_to_siureg[irq_nr];
static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type)
{
unsigned int src = virq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
}
static struct irq_chip cpm2_pic = {
- .typename = " CPM2 SIU ",
+ .name = " CPM2 SIU ",
.mask = cpm2_mask_irq,
.unmask = cpm2_unmask_irq,
.ack = cpm2_ack,
{
pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq);
return 0;
}
/* Max address size we deal with */
#define OF_MAX_ADDR_CELLS 4
-int __init cpm_muram_init(void)
+int cpm_muram_init(void)
{
struct device_node *np;
struct resource r;
int i = 0;
int ret = 0;
+ if (muram_pbase)
+ return 0;
+
spin_lock_init(&cpm_muram_lock);
/* initialize the info header */
rh_init(&cpm_muram_info, 1,
.mask = mask_msi_irq,
.unmask = unmask_msi_irq,
.ack = fsl_msi_end_irq,
- .typename = " FSL-MSI ",
+ .name = " FSL-MSI ",
};
static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
{
struct irq_chip *chip = &fsl_msi_chip;
- get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+ irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
set_irq_chip_and_handler(virq, chip, handle_edge_irq);
return 0;
}
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
-#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
+#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
--- /dev/null
+/*
+ * Suspend/resume support
+ *
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/suspend.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+
+struct pmc_regs {
+ __be32 devdisr;
+ __be32 devdisr2;
+ __be32 :32;
+ __be32 :32;
+ __be32 pmcsr;
+#define PMCSR_SLP (1 << 17)
+};
+
+static struct device *pmc_dev;
+static struct pmc_regs __iomem *pmc_regs;
+
+static int pmc_suspend_enter(suspend_state_t state)
+{
+ int ret;
+
+ setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
+ /* At this point, the CPU is asleep. */
+
+ /* Upon resume, wait for SLP bit to be clear. */
+ ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0,
+ 10000, 10) ? 0 : -ETIMEDOUT;
+ if (ret)
+ dev_err(pmc_dev, "tired waiting for SLP bit to clear\n");
+ return ret;
+}
+
+static int pmc_suspend_valid(suspend_state_t state)
+{
+ if (state != PM_SUSPEND_STANDBY)
+ return 0;
+ return 1;
+}
+
+static struct platform_suspend_ops pmc_suspend_ops = {
+ .valid = pmc_suspend_valid,
+ .enter = pmc_suspend_enter,
+};
+
+static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+ pmc_regs = of_iomap(ofdev->node, 0);
+ if (!pmc_regs)
+ return -ENOMEM;
+
+ pmc_dev = &ofdev->dev;
+ suspend_set_ops(&pmc_suspend_ops);
+ return 0;
+}
+
+static const struct of_device_id pmc_ids[] = {
+ { .compatible = "fsl,mpc8548-pmc", },
+ { .compatible = "fsl,mpc8641d-pmc", },
+ { },
+};
+
+static struct of_platform_driver pmc_driver = {
+ .driver.name = "fsl-pmc",
+ .match_table = pmc_ids,
+ .probe = pmc_probe,
+};
+
+static int __init pmc_init(void)
+{
+ return of_register_platform_driver(&pmc_driver);
+}
+device_initcall(pmc_init);
arch_initcall(fsl_usb_of_init);
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static __be32 __iomem *rstcr;
static int __init setup_rstcr(void)
}
static struct irq_chip i8259_pic = {
- .typename = " i8259 ",
+ .name = " i8259 ",
.mask = i8259_mask_irq,
.disable = i8259_mask_irq,
.unmask = i8259_unmask_irq,
/* We block the internal cascade */
if (hw == 2)
- get_irq_desc(virq)->status |= IRQ_NOREQUEST;
+ irq_to_desc(virq)->status |= IRQ_NOREQUEST;
/* We use the level handler only for now, we might want to
* be more cautious here but that works for now
*/
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq);
return 0;
}
{
struct ipic *ipic = ipic_from_irq(virq);
unsigned int src = ipic_irq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned int vold, vnew, edibit;
if (flow_type == IRQ_TYPE_NONE)
/* level interrupts and edge interrupts have different ack operations */
static struct irq_chip ipic_level_irq_chip = {
- .typename = " IPIC ",
+ .name = " IPIC ",
.unmask = ipic_unmask_irq,
.mask = ipic_mask_irq,
.mask_ack = ipic_mask_irq,
};
static struct irq_chip ipic_edge_irq_chip = {
- .typename = " IPIC ",
+ .name = " IPIC ",
.unmask = ipic_unmask_irq,
.mask = ipic_mask_irq,
.mask_ack = ipic_mask_irq_and_ack,
static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
}
static struct irq_chip mpc8xx_pic = {
- .typename = " MPC8XX SIU ",
+ .name = " MPC8XX SIU ",
.unmask = mpc8xx_unmask_irq,
.mask = mpc8xx_mask_irq,
.ack = mpc8xx_ack,
cpumask_t mask;
int cpuid;
- cpumask_copy(&mask, irq_desc[virt_irq].affinity);
+ cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity);
if (cpus_equal(mask, CPU_MASK_ALL)) {
static int irq_rover;
static DEFINE_SPINLOCK(irq_rover_lock);
if (irq < NUM_ISA_INTERRUPTS)
return NULL;
- return irq_desc[irq].chip_data;
+ return irq_to_desc(irq)->chip_data;
}
/* Determine if the linux irq is an IPI */
/* Get the mpic structure from the IPI number */
static inline struct mpic * mpic_from_ipi(unsigned int ipi)
{
- return irq_desc[ipi].chip_data;
+ return irq_to_desc(ipi)->chip_data;
}
#endif
/* Get the mpic structure from the irq number */
static inline struct mpic * mpic_from_irq(unsigned int irq)
{
- return irq_desc[irq].chip_data;
+ return irq_to_desc(irq)->chip_data;
}
/* Send an EOI */
mpic_unmask_irq(irq);
- if (irq_desc[irq].status & IRQ_LEVEL)
+ if (irq_to_desc(irq)->status & IRQ_LEVEL)
mpic_ht_end_irq(mpic, src);
}
unsigned int src = mpic_irq_to_hw(irq);
mpic_unmask_irq(irq);
- mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status);
+ mpic_startup_ht_interrupt(mpic, src, irq_to_desc(irq)->status);
return 0;
}
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
- mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status);
+ mpic_shutdown_ht_interrupt(mpic, src, irq_to_desc(irq)->status);
mpic_mask_irq(irq);
}
* latched another edge interrupt coming in anyway
*/
- if (irq_desc[irq].status & IRQ_LEVEL)
+ if (irq_to_desc(irq)->status & IRQ_LEVEL)
mpic_ht_end_irq(mpic, src);
mpic_eoi(mpic);
}
{
struct mpic *mpic = mpic_from_irq(virq);
unsigned int src = mpic_irq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned int vecpri, vold, vnew;
DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n",
mpic->name = name;
mpic->hc_irq = mpic_irq_chip;
- mpic->hc_irq.typename = name;
+ mpic->hc_irq.name = name;
if (flags & MPIC_PRIMARY)
mpic->hc_irq.set_affinity = mpic_set_affinity;
#ifdef CONFIG_MPIC_U3_HT_IRQS
mpic->hc_ht_irq = mpic_irq_ht_chip;
- mpic->hc_ht_irq.typename = name;
+ mpic->hc_ht_irq.name = name;
if (flags & MPIC_PRIMARY)
mpic->hc_ht_irq.set_affinity = mpic_set_affinity;
#endif /* CONFIG_MPIC_U3_HT_IRQS */
#ifdef CONFIG_SMP
mpic->hc_ipi = mpic_ipi_chip;
- mpic->hc_ipi.typename = name;
+ mpic->hc_ipi.name = name;
#endif /* CONFIG_SMP */
mpic->flags = flags;
.eoi = mpic_end_irq,
.set_type = mpic_set_irq_type,
.set_affinity = mpic_set_affinity,
- .typename = "PASEMI-MSI ",
+ .name = "PASEMI-MSI ",
};
static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
.eoi = mpic_end_irq,
.set_type = mpic_set_irq_type,
.set_affinity = mpic_set_affinity,
- .typename = "MPIC-U3MSI",
+ .name = "MPIC-U3MSI",
};
static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos)
{
int level1;
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET;
BUG_ON(level1 > MV64x60_LEVEL1_GPP);
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/pgtable.h>
static phys_addr_t qebase = -1;
-int qe_alive_during_sleep(void)
-{
- static int ret = -1;
-
- if (ret != -1)
- return ret;
-
- ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
-
- return ret;
-}
-EXPORT_SYMBOL(qe_alive_during_sleep);
-
phys_addr_t get_qe_base(void)
{
struct device_node *qe;
EXPORT_SYMBOL(get_qe_base);
-void __init qe_reset(void)
+void qe_reset(void)
{
if (qe_immr == NULL)
qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
static int qe_sdma_init(void)
{
struct sdma __iomem *sdma = &qe_immr->sdma;
- unsigned long sdma_buf_offset;
+ static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM;
if (!sdma)
return -ENODEV;
/* allocate 2 internal temporary buffers (512 bytes size each) for
* the SDMA */
- sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
- if (IS_ERR_VALUE(sdma_buf_offset))
- return -ENOMEM;
+ if (IS_ERR_VALUE(sdma_buf_offset)) {
+ sdma_buf_offset = qe_muram_alloc(512 * 2, 4096);
+ if (IS_ERR_VALUE(sdma_buf_offset))
+ return -ENOMEM;
+ }
out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK);
out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK |
}
/* The maximum number of RISCs we support */
-#define MAX_QE_RISC 2
+#define MAX_QE_RISC 4
/* Firmware information stored here for qe_get_firmware_info() */
static struct qe_firmware_info qe_firmware_info;
return num_of_snums;
}
EXPORT_SYMBOL(qe_get_num_of_snums);
+
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx)
+static int qe_resume(struct of_device *ofdev)
+{
+ if (!qe_alive_during_sleep())
+ qe_reset();
+ return 0;
+}
+
+static int qe_probe(struct of_device *ofdev, const struct of_device_id *id)
+{
+ return 0;
+}
+
+static const struct of_device_id qe_ids[] = {
+ { .compatible = "fsl,qe", },
+ { },
+};
+
+static struct of_platform_driver qe_driver = {
+ .driver.name = "fsl-qe",
+ .match_table = qe_ids,
+ .probe = qe_probe,
+ .resume = qe_resume,
+};
+
+static int __init qe_drv_init(void)
+{
+ return of_register_platform_driver(&qe_driver);
+}
+device_initcall(qe_drv_init);
+#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */
static inline struct qe_ic *qe_ic_from_irq(unsigned int virq)
{
- return irq_desc[virq].chip_data;
+ return irq_to_desc(virq)->chip_data;
}
#define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq)
}
static struct irq_chip qe_ic_irq_chip = {
- .typename = " QEIC ",
+ .name = " QEIC ",
.unmask = qe_ic_unmask_irq,
.mask = qe_ic_mask_irq,
.mask_ack = qe_ic_mask_irq,
chip = &qe_ic->hc_irq;
set_irq_chip_data(virq, qe_ic);
- get_irq_desc(virq)->status |= IRQ_LEVEL;
+ irq_to_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip_and_handler(virq, chip, handle_level_irq);
*/
static struct irq_chip tsi108_pci_irq = {
- .typename = "tsi108_PCI_int",
+ .name = "tsi108_PCI_int",
.mask = tsi108_pci_irq_disable,
.ack = tsi108_pci_irq_ack,
.end = tsi108_pci_irq_end,
DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
if ((virq >= 1) && (virq <= 4)){
irq = virq + IRQ_PCI_INTAD_BASE - 1;
- get_irq_desc(irq)->status |= IRQ_LEVEL;
+ irq_to_desc(irq)->status |= IRQ_LEVEL;
set_irq_chip(irq, &tsi108_pci_irq);
}
return 0;
static void uic_unmask_irq(unsigned int virq)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
static void uic_mask_ack_irq(unsigned int virq)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
{
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
unsigned long flags;
int trigger, polarity;
u32 tr, pr, mask;
}
static struct irq_chip uic_irq_chip = {
- .typename = " UIC ",
+ .name = " UIC ",
.unmask = uic_unmask_irq,
.mask = uic_mask_irq,
.mask_ack = uic_mask_ack_irq,
static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
{
- struct irq_desc *desc = get_irq_desc(virq);
+ struct irq_desc *desc = irq_to_desc(virq);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
}
static struct irq_chip xilinx_intc_level_irqchip = {
- .typename = "Xilinx Level INTC",
+ .name = "Xilinx Level INTC",
.mask = xilinx_intc_mask,
.mask_ack = xilinx_intc_mask,
.unmask = xilinx_intc_level_unmask,
}
static struct irq_chip xilinx_intc_edge_irqchip = {
- .typename = "Xilinx Edge INTC",
+ .name = "Xilinx Edge INTC",
.mask = xilinx_intc_mask,
.unmask = xilinx_intc_edge_unmask,
.ack = xilinx_intc_edge_ack,
ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1);
printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n",
ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
- printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
+ printf(" Saved Gpr5=%.16lx \n",
+ ptrLpPaca->gpr5_dword.saved_gpr5);
}
#endif
disabled_wait(0);
sched_clock_base_cc = TOD_UNIX_EPOCH;
+ S390_lowcore.last_update_clock = sched_clock_base_cc;
}
#ifdef CONFIG_SHARED_KERNEL
return;
}
+ /* re-initialize cputime accounting. */
+ sched_clock_base_cc = get_clock();
+ S390_lowcore.last_update_clock = sched_clock_base_cc;
+ S390_lowcore.last_update_timer = 0x7fffffffffffffffULL;
+ S390_lowcore.user_timer = 0;
+ S390_lowcore.system_timer = 0;
+ asm volatile("SPT 0(%0)" : : "a" (&S390_lowcore.last_update_timer));
+
/* re-setup boot command line with new ipl vm parms */
ipl_update_parameters();
setup_boot_command_line();
lh %r7,0x8a # get svc number from lowcore
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
TRACE_IRQS_OFF
- l %r1,__TI_task(%r9)
- mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
- mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
- mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
+ l %r8,__TI_task(%r9)
+ mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
+ mvc __THREAD_per+__PER_address(4,%r8),__LC_PER_ADDRESS
+ mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- lg %r1,__TI_task(%r9)
- mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
- mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
- mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
+ lg %r8,__TI_task(%r9)
+ mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
+ mvc __THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS
+ mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
TRACE_IRQS_ON
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
#endif
#define __RWSEM_INITIALIZER(name) \
- { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
LIST_HEAD_INIT((name).wait_list) \
__RWSEM_DEP_MAP_INIT(name) }
}
static struct irq_chip imask_irq_chip = {
- .typename = "SR.IMASK",
+ .name = "SR.IMASK",
.mask = mask_imask_irq,
.unmask = unmask_imask_irq,
.mask_ack = mask_imask_irq,
static void end_intc_irq(unsigned int irq);
static struct irq_chip intc_irq_type = {
- .typename = "INTC",
+ .name = "INTC",
.startup = startup_intc_irq,
.shutdown = shutdown_intc_irq,
.enable = enable_intc_irq,
* NOTE: the return address is guaranteed to be setup by the
* time this function makes its first function call.
*/
- if (!pc && !prev)
+ if (!pc || !prev)
pc = (unsigned long)current_text_addr();
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
for (v = start; v < end; v += L1_CACHE_BYTES) {
unsigned long icacheaddr;
+ int j, n;
__ocbwb(v);
cpu_data->icache.entry_mask);
/* Clear i-cache line valid-bit */
+ n = boot_cpu_data.icache.n_aliases;
for (i = 0; i < cpu_data->icache.ways; i++) {
- __raw_writel(0, icacheaddr);
+ for (j = 0; j < n; j++)
+ __raw_writel(0, icacheaddr + (j * PAGE_SIZE));
icacheaddr += cpu_data->icache.way_incr;
}
}
unsigned long lastfrelno;
btfixup *lastf;
-void fatal(void) __attribute__((noreturn));
-void fatal(void)
+static void fatal(void) __attribute__((noreturn));
+static void fatal(void)
{
fprintf(stderr, "Malformed output from objdump\n%s\n", buffer);
exit(1);
}
-btfixup *find(int type, char *name)
+static btfixup *find(int type, char *name)
{
int i;
for (i = 0; i < last; i++) {
return array + last - 1;
}
-void set_mode (char *buffer)
+static void set_mode (char *buffer)
{
for (mode = 0;; mode++)
if (buffer[mode] < '0' || buffer[mode] > '9')
* as PROM looks for a.out image only.
*/
-unsigned short ld2(char *p)
+static unsigned short ld2(char *p)
{
return (p[0] << 8) | p[1];
}
-unsigned int ld4(char *p)
+static unsigned int ld4(char *p)
{
return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3];
}
-void st4(char *p, unsigned int x)
+static void st4(char *p, unsigned int x)
{
p[0] = x >> 24;
p[1] = x >> 16;
p[3] = x;
}
-void usage(void)
+static void usage(void)
{
/* fs_img.gz is an image of initial ramdisk. */
fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n");
exit(1);
}
-void die(char *str)
+static void die(char *str)
{
perror (str);
exit(1);
/* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly
usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */
-void die(char *str)
+static void die(char *str)
{
perror (str);
exit(1);
: : : "memory"); \
} while (0)
+/* The kernel always executes in TSO memory model these days,
+ * and furthermore most sparc64 chips implement more stringent
+ * memory ordering than required by the specifications.
+ */
#define mb() membar_safe("#StoreLoad")
#define rmb() __asm__ __volatile__("":::"memory")
#define wmb() __asm__ __volatile__("":::"memory")
err = -ENODEV;
+ mutex_lock(&of_set_property_mutex);
write_lock(&devtree_lock);
prevp = &dp->properties;
while (*prevp) {
void *old_val = prop->value;
int ret;
- mutex_lock(&of_set_property_mutex);
ret = prom_setprop(dp->node, name, val, len);
- mutex_unlock(&of_set_property_mutex);
err = -EINVAL;
if (ret >= 0) {
prevp = &(*prevp)->next;
}
write_unlock(&devtree_lock);
+ mutex_unlock(&of_set_property_mutex);
/* XXX Upate procfs if necessary... */
rs2 = fps_regval(f, RS2(insn));
rd_val = 0;
- src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0);
+ src2 = rs2 >> (opf == FMUL8x16AU_OPF ? 16 : 0);
for (byte = 0; byte < 4; byte++) {
u16 src1 = (rs1 >> (byte * 8)) & 0x00ff;
u32 prod = src1 * src2;
extern void amd_iommu_flush_all_domains(void);
extern void amd_iommu_flush_all_devices(void);
extern void amd_iommu_shutdown(void);
+extern void amd_iommu_apply_erratum_63(u16 devid);
#else
static inline int amd_iommu_init(void) { return -ENODEV; }
static inline void amd_iommu_detect(void) { }
static inline unsigned long get_desc_base(const struct desc_struct *desc)
{
- return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
+ return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24));
}
static inline void set_desc_base(struct desc_struct *desc, unsigned long base)
#include <asm/swiotlb.h>
#include <asm-generic/dma-coherent.h>
+#ifdef CONFIG_ISA
+# define ISA_DMA_BIT_MASK DMA_BIT_MASK(24)
+#else
+# define ISA_DMA_BIT_MASK DMA_BIT_MASK(32)
+#endif
+
extern dma_addr_t bad_dma_address;
extern int iommu_merge;
extern struct device x86_dma_fallback_dev;
if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
return memory;
- if (!dev) {
+ if (!dev)
dev = &x86_dma_fallback_dev;
- gfp |= GFP_DMA;
- }
if (!is_device_dma_capable(dev))
return NULL;
#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8))
#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
-#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */
+extern unsigned long KSTK_ESP(struct task_struct *task);
#endif /* CONFIG_X86_64 */
extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
amd_iommu_dev_table[devid].data[1] = 0;
amd_iommu_dev_table[devid].data[2] = 0;
+ amd_iommu_apply_erratum_63(devid);
+
/* decrease reference counter */
domain->dev_cnt -= 1;
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
-static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
{
u32 ctrl;
amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
}
+static int get_dev_entry_bit(u16 devid, u8 bit)
+{
+ int i = (bit >> 5) & 0x07;
+ int _bit = bit & 0x1f;
+
+ return (amd_iommu_dev_table[devid].data[i] & (1 << _bit)) >> _bit;
+}
+
+
+void amd_iommu_apply_erratum_63(u16 devid)
+{
+ int sysmgt;
+
+ sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) |
+ (get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1);
+
+ if (sysmgt == 0x01)
+ set_dev_entry_bit(devid, DEV_ENTRY_IW);
+}
+
/* Writes the specific IOMMU for a device into the rlookup table */
static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
{
if (flags & ACPI_DEVFLAG_LINT1)
set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
+ amd_iommu_apply_erratum_63(devid);
+
set_iommu_for_device(iommu, devid);
}
static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
{
- /* http://www.intel.com/Assets/PDF/specupdate/314554.pdf
+ /* Intel Xeon Processor 7100 Series Specification Update
+ * http://www.intel.com/Assets/PDF/specupdate/314554.pdf
* AL30: A Machine Check Exception (MCE) Occurring during an
* Enhanced Intel SpeedStep Technology Ratio Change May Cause
- * Both Processor Cores to Lock Up when HT is enabled*/
+ * Both Processor Cores to Lock Up. */
if (c->x86_vendor == X86_VENDOR_INTEL) {
if ((c->x86 == 15) &&
(c->x86_model == 6) &&
- (c->x86_mask == 8) && smt_capable())
+ (c->x86_mask == 8)) {
+ printk(KERN_INFO "acpi-cpufreq: Intel(R) "
+ "Xeon(R) 7100 Errata AL30, processors may "
+ "lock up on frequency changes: disabling "
+ "acpi-cpufreq.\n");
return -ENODEV;
+ }
}
return 0;
}
unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
struct acpi_processor_performance *perf;
+#ifdef CONFIG_SMP
+ static int blacklisted;
+#endif
dprintk("acpi_cpufreq_cpu_init\n");
#ifdef CONFIG_SMP
- result = acpi_cpufreq_blacklist(c);
- if (result)
- return result;
+ if (blacklisted)
+ return blacklisted;
+ blacklisted = acpi_cpufreq_blacklist(c);
+ if (blacklisted)
+ return blacklisted;
#endif
data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL);
memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr));
break;
case 1 ... 15:
- longhaul_version = TYPE_LONGHAUL_V1;
+ longhaul_version = TYPE_LONGHAUL_V2;
if (c->x86_mask < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
* set it to 1 to avoid problems in the future.
* For all others it's a BIOS bug.
*/
- if (!boot_cpu_data.x86 == 0x11)
+ if (boot_cpu_data.x86 != 0x11)
printk(KERN_ERR FW_WARN PFX "Invalid zero transition "
"latency\n");
max_latency = 1;
return 0;
}
-struct get_freq_data {
- unsigned int speed;
- unsigned int processor;
-};
-
-static void get_freq_data(void *_data)
+static void get_freq_data(void *_speed)
{
- struct get_freq_data *data = _data;
+ unsigned int *speed = _speed;
- data->speed = speedstep_get_frequency(data->processor);
+ *speed = speedstep_get_frequency(speedstep_processor);
}
static unsigned int speedstep_get(unsigned int cpu)
{
- struct get_freq_data data = { .processor = cpu };
+ unsigned int speed;
/* You're supposed to ensure CPU is online. */
- if (smp_call_function_single(cpu, get_freq_data, &data, 1) != 0)
+ if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0)
BUG();
- dprintk("detected %u kHz as current frequency\n", data.speed);
- return data.speed;
+ dprintk("detected %u kHz as current frequency\n", speed);
+ return speed;
}
/**
sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
range_sums = sum_ranges(range, nr_range);
- printk(KERN_INFO "total RAM coverred: %ldM\n",
+ printk(KERN_INFO "total RAM covered: %ldM\n",
range_sums >> (20 - PAGE_SHIFT));
if (mtrr_chunk_size && mtrr_gran_size) {
return UCODE_NFOUND;
}
+ if (*(u32 *)firmware->data != UCODE_MAGIC) {
+ printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n",
+ *(u32 *)firmware->data);
+ return UCODE_ERROR;
+ }
+
ret = generic_load_microcode(cpu, firmware->data, firmware->size);
release_firmware(firmware);
dma_addr_t bad_dma_address __read_mostly = 0;
EXPORT_SYMBOL(bad_dma_address);
-/* Dummy device used for NULL arguments (normally ISA). Better would
- be probably a smaller DMA mask, but this is bug-to-bug compatible
- to older i386. */
+/* Dummy device used for NULL arguments (normally ISA). */
struct device x86_dma_fallback_dev = {
.init_name = "fallback device",
- .coherent_dma_mask = DMA_BIT_MASK(32),
+ .coherent_dma_mask = ISA_DMA_BIT_MASK,
.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
};
EXPORT_SYMBOL(x86_dma_fallback_dev);
return do_arch_prctl(current, code, addr);
}
+unsigned long KSTK_ESP(struct task_struct *task)
+{
+ return (test_tsk_thread_flag(task, TIF_IA32)) ?
+ (task_pt_regs(task)->sp) : ((task)->thread.usersp);
+}
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
},
},
+ { /* Handle problems with rebooting on Apple Macmini3,1 */
+ .callback = set_pci_reboot,
+ .ident = "Apple Macmini3,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
+ },
+ },
{ }
};
DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
},
},
+ {
+ .callback = dmi_low_memory_corruption,
+ .ident = "Phoenix/MSC BIOS",
+ .matches = {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"),
+ },
+ },
{
/*
* AMI BIOS with low memory corruption was found on Intel DG45ID board.
unsigned bank_num = mcg_cap & 0xff, bank;
r = -EINVAL;
- if (!bank_num)
+ if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
goto out;
if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000))
goto out;
return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
}
-static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
+static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu,
struct desc_struct *seg_desc)
{
u32 base_addr = get_desc_base(seg_desc);
(unsigned long long)phys_addr,
(unsigned long long)(phys_addr + size),
prot_val, new_prot_val);
- free_memtype(phys_addr, phys_addr + size);
- return NULL;
+ goto err_free_memtype;
}
prot_val = new_prot_val;
}
*/
area = get_vm_area_caller(size, VM_IOREMAP, caller);
if (!area)
- return NULL;
+ goto err_free_memtype;
area->phys_addr = phys_addr;
vaddr = (unsigned long) area->addr;
- if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
- free_memtype(phys_addr, phys_addr + size);
- free_vm_area(area);
- return NULL;
- }
+ if (kernel_map_sync_memtype(phys_addr, size, prot_val))
+ goto err_free_area;
- if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
- free_memtype(phys_addr, phys_addr + size);
- free_vm_area(area);
- return NULL;
- }
+ if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot))
+ goto err_free_area;
ret_addr = (void __iomem *) (vaddr + offset);
mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr);
return ret_addr;
+err_free_area:
+ free_vm_area(area);
+err_free_memtype:
+ free_memtype(phys_addr, phys_addr + size);
+ return NULL;
}
/**
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskebx = ~0;
unsigned maskecx = ~0;
unsigned maskedx = ~0;
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1) {
+ switch (*ax) {
+ case 1:
maskecx = cpuid_leaf1_ecx_mask;
maskedx = cpuid_leaf1_edx_mask;
+ break;
+
+ case 0xb:
+ /* Suppress extended topology stuff */
+ maskebx = 0;
+ break;
}
asm(XEN_EMULATE_PREFIX "cpuid"
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+ *bx &= maskebx;
*cx &= maskecx;
*dx &= maskedx;
}
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */
+ CFQ_CFQQ_FLAG_coop_preempt, /* coop preempt */
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
CFQ_CFQQ_FNS(coop);
+CFQ_CFQQ_FNS(coop_preempt);
#undef CFQ_CFQQ_FNS
#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
{
if (!cfqq) {
cfqq = cfq_get_next_queue(cfqd);
- if (cfqq)
+ if (cfqq && !cfq_cfqq_coop_preempt(cfqq))
cfq_clear_cfqq_coop(cfqq);
}
+ if (cfqq)
+ cfq_clear_cfqq_coop_preempt(cfqq);
+
__cfq_set_active_queue(cfqd, cfqq);
return cfqq;
}
* it's a metadata request and the current queue is doing regular IO.
*/
if (rq_is_meta(rq) && !cfqq->meta_pending)
- return false;
+ return true;
/*
* Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice.
* if this request is as-good as one we would expect from the
* current cfqq, let it preempt
*/
- if (cfq_rq_close(cfqd, rq))
+ if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) ||
+ cfqd->busy_queues == 1)) {
+ /*
+ * Mark new queue coop_preempt, so its coop flag will not be
+ * cleared when new queue gets scheduled at the very first time
+ */
+ cfq_mark_cfqq_coop_preempt(new_cfqq);
+ cfq_mark_cfqq_coop(new_cfqq);
return true;
+ }
return false;
}
#define ACPI_MAX_REFERENCE_COUNT 0x1000
-/* Size of cached memory mapping for system memory operation region */
+/* Default page size for use in mapping memory for operation regions */
-#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096
+#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */
/* owner_id tracking. 8 entries allows for 255 owner_ids */
void *logical_addr_ptr = NULL;
struct acpi_mem_space_context *mem_info = region_context;
u32 length;
- acpi_size window_size;
+ acpi_size map_length;
+ acpi_size page_boundary_map_length;
#ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
u32 remainder;
#endif
}
/*
- * Don't attempt to map memory beyond the end of the region, and
- * constrain the maximum mapping size to something reasonable.
+ * Attempt to map from the requested address to the end of the region.
+ * However, we will never map more than one page, nor will we cross
+ * a page boundary.
*/
- window_size = (acpi_size)
+ map_length = (acpi_size)
((mem_info->address + mem_info->length) - address);
- if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
- window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+ /*
+ * If mapping the entire remaining portion of the region will cross
+ * a page boundary, just map up to the page boundary, do not cross.
+ * On some systems, crossing a page boundary while mapping regions
+ * can cause warnings if the pages have different attributes
+ * due to resource management
+ */
+ page_boundary_map_length =
+ ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
+
+ if (!page_boundary_map_length) {
+ page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
+ }
+
+ if (map_length > page_boundary_map_length) {
+ map_length = page_boundary_map_length;
}
/* Create a new mapping starting at the address given */
- mem_info->mapped_logical_address =
- acpi_os_map_memory((acpi_physical_address) address, window_size);
+ mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
if (!mem_info->mapped_logical_address) {
ACPI_ERROR((AE_INFO,
"Could not map memory at %8.8X%8.8X, size %X",
ACPI_FORMAT_NATIVE_UINT(address),
- (u32) window_size));
+ (u32) map_length));
mem_info->mapped_length = 0;
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Save the physical address and mapping size */
mem_info->mapped_physical_address = address;
- mem_info->mapped_length = window_size;
+ mem_info->mapped_length = map_length;
}
/*
return -EINVAL;
}
- return data;
+ /* _PTP returns 0 on success, nonzero otherwise */
+ if (data)
+ return -EINVAL;
+
+ return 0;
}
static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,
struct list_head *node, *next;
char strbuf[5];
char str[5] = "";
- int len = count;
+ unsigned int len = count;
struct acpi_device *found_dev = NULL;
if (len > 4)
.notifier_call = acpi_cpu_soft_notify,
};
-static int acpi_processor_add(struct acpi_device *device)
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
{
struct acpi_processor *pr = NULL;
int result = 0;
int result = 0;
struct acpi_processor_throttling *pthrottling;
+ if (!pr)
+ return -EINVAL;
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
pr->throttling.address,
pr->throttling.duty_offset,
pr->throttling.duty_width));
- if (!pr)
- return -EINVAL;
-
/*
* Evaluate _PTC, _TSS and _TPC
* They must all be present or none of them can be used.
},
},
{
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard Pavilion dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard Pavilion dv7",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"),
+ },
+ },
+ {
.callback = init_old_suspend_ordering,
.ident = "Panasonic CF51-2L",
.matches = {
u32 state = 0;
- if (!dev || count + 1 > sizeof str)
+ if (!dev || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
int i;
- if (!dev || !dev->brightness || count + 1 > sizeof str)
+ if (!dev || !dev->brightness || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
unsigned long long opt, options;
- if (!video || count + 1 > sizeof str)
+ if (!video || count >= sizeof(str))
return -EINVAL;
status = acpi_video_bus_POST_options(video, &options);
unsigned long opt;
- if (!video || count + 1 > sizeof str)
+ if (!video || count >= sizeof(str))
return -EINVAL;
if (copy_from_user(str, buffer, count))
If unsure, say N.
+config PATA_MACIO
+ tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+ depends on PPC_PMAC
+ help
+ Most IDE capable PowerMacs have IDE busses driven by a variant
+ of this controller which is part of the Apple chipset used on
+ most PowerMac models. Some models have multiple busses using
+ different chipsets, though generally, MacIO is one of them.
+
+
endif # ATA_SFF
endif # ATA
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
+obj-$(CONFIG_PATA_MACIO) += pata_macio.o
obj-$(CONFIG_PATA_ALI) += pata_ali.o
obj-$(CONFIG_PATA_AMD) += pata_amd.o
},
.driver_data = "20071026", /* yyyymmdd */
},
+ /*
+ * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
+ * support 64bit DMA.
+ *
+ * BIOS versions earlier than 1.5 had the Manufacturer DMI
+ * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
+ * This spelling mistake was fixed in BIOS version 1.5, so
+ * 1.5 and later have the Manufacturer as
+ * "MICRO-STAR INTERNATIONAL CO.,LTD".
+ * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
+ *
+ * BIOS versions earlier than 1.9 had a Board Product Name
+ * DMI field of "MS-7376". This was changed to be
+ * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
+ * match on DMI_BOARD_NAME of "MS-7376".
+ */
+ {
+ .ident = "MSI K9A2 Platinum",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR,
+ "MICRO-STAR INTER"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
+ },
+ },
{ }
};
const struct dmi_system_id *match;
!match)
return false;
+ if (!match->driver_data)
+ goto enable_64bit;
+
dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
- if (strcmp(buf, match->driver_data) >= 0) {
- dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
- match->ident);
- return true;
- } else {
+ if (strcmp(buf, match->driver_data) >= 0)
+ goto enable_64bit;
+ else {
dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
"forcing 32bit DMA, update BIOS\n", match->ident);
return false;
}
+
+enable_64bit:
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+ match->ident);
+ return true;
}
static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
+ struct ata_port *ap;
unsigned int tag;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ ap = qc->ap;
qc->flags = 0;
tag = qc->tag;
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- struct ata_link *link = qc->dev->link;
+ struct ata_port *ap;
+ struct ata_link *link;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ ap = qc->ap;
+ link = qc->dev->link;
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
ap->hsm_task_state = HSM_ST_IDLE;
if (ap->ioaddr.bmdma_addr)
- ata_bmdma_stop(qc);
+ ap->ops->bmdma_stop(qc);
spin_unlock_irqrestore(ap->lock, flags);
}
--- /dev/null
+/*
+ * Libata based driver for Apple "macio" family of PATA controllers
+ *
+ * Copyright 2008/2009 Benjamin Herrenschmidt, IBM Corp
+ * <benh@kernel.crashing.org>
+ *
+ * Some bits and pieces from drivers/ide/ppc/pmac.c
+ *
+ */
+
+#undef DEBUG
+#undef DEBUG_DMA
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/ata.h>
+#include <linux/libata.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/scatterlist.h>
+#include <linux/of.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+
+#include <asm/macio.h>
+#include <asm/io.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/mediabay.h>
+
+#ifdef DEBUG_DMA
+#define dev_dbgdma(dev, format, arg...) \
+ dev_printk(KERN_DEBUG , dev , format , ## arg)
+#else
+#define dev_dbgdma(dev, format, arg...) \
+ ({ if (0) dev_printk(KERN_DEBUG, dev, format, ##arg); 0; })
+#endif
+
+#define DRV_NAME "pata_macio"
+#define DRV_VERSION "0.9"
+
+/* Models of macio ATA controller */
+enum {
+ controller_ohare, /* OHare based */
+ controller_heathrow, /* Heathrow/Paddington */
+ controller_kl_ata3, /* KeyLargo ATA-3 */
+ controller_kl_ata4, /* KeyLargo ATA-4 */
+ controller_un_ata6, /* UniNorth2 ATA-6 */
+ controller_k2_ata6, /* K2 ATA-6 */
+ controller_sh_ata6, /* Shasta ATA-6 */
+};
+
+static const char* macio_ata_names[] = {
+ "OHare ATA", /* OHare based */
+ "Heathrow ATA", /* Heathrow/Paddington */
+ "KeyLargo ATA-3", /* KeyLargo ATA-3 (MDMA only) */
+ "KeyLargo ATA-4", /* KeyLargo ATA-4 (UDMA/66) */
+ "UniNorth ATA-6", /* UniNorth2 ATA-6 (UDMA/100) */
+ "K2 ATA-6", /* K2 ATA-6 (UDMA/100) */
+ "Shasta ATA-6", /* Shasta ATA-6 (UDMA/133) */
+};
+
+/*
+ * Extra registers, both 32-bit little-endian
+ */
+#define IDE_TIMING_CONFIG 0x200
+#define IDE_INTERRUPT 0x300
+
+/* Kauai (U2) ATA has different register setup */
+#define IDE_KAUAI_PIO_CONFIG 0x200
+#define IDE_KAUAI_ULTRA_CONFIG 0x210
+#define IDE_KAUAI_POLL_CONFIG 0x220
+
+/*
+ * Timing configuration register definitions
+ */
+
+/* Number of IDE_SYSCLK_NS ticks, argument is in nanoseconds */
+#define SYSCLK_TICKS(t) (((t) + IDE_SYSCLK_NS - 1) / IDE_SYSCLK_NS)
+#define SYSCLK_TICKS_66(t) (((t) + IDE_SYSCLK_66_NS - 1) / IDE_SYSCLK_66_NS)
+#define IDE_SYSCLK_NS 30 /* 33Mhz cell */
+#define IDE_SYSCLK_66_NS 15 /* 66Mhz cell */
+
+/* 133Mhz cell, found in shasta.
+ * See comments about 100 Mhz Uninorth 2...
+ * Note that PIO_MASK and MDMA_MASK seem to overlap, that's just
+ * weird and I don't now why .. at this stage
+ */
+#define TR_133_PIOREG_PIO_MASK 0xff000fff
+#define TR_133_PIOREG_MDMA_MASK 0x00fff800
+#define TR_133_UDMAREG_UDMA_MASK 0x0003ffff
+#define TR_133_UDMAREG_UDMA_EN 0x00000001
+
+/* 100Mhz cell, found in Uninorth 2 and K2. It appears as a pci device
+ * (106b/0033) on uninorth or K2 internal PCI bus and it's clock is
+ * controlled like gem or fw. It appears to be an evolution of keylargo
+ * ATA4 with a timing register extended to 2x32bits registers (one
+ * for PIO & MWDMA and one for UDMA, and a similar DBDMA channel.
+ * It has it's own local feature control register as well.
+ *
+ * After scratching my mind over the timing values, at least for PIO
+ * and MDMA, I think I've figured the format of the timing register,
+ * though I use pre-calculated tables for UDMA as usual...
+ */
+#define TR_100_PIO_ADDRSETUP_MASK 0xff000000 /* Size of field unknown */
+#define TR_100_PIO_ADDRSETUP_SHIFT 24
+#define TR_100_MDMA_MASK 0x00fff000
+#define TR_100_MDMA_RECOVERY_MASK 0x00fc0000
+#define TR_100_MDMA_RECOVERY_SHIFT 18
+#define TR_100_MDMA_ACCESS_MASK 0x0003f000
+#define TR_100_MDMA_ACCESS_SHIFT 12
+#define TR_100_PIO_MASK 0xff000fff
+#define TR_100_PIO_RECOVERY_MASK 0x00000fc0
+#define TR_100_PIO_RECOVERY_SHIFT 6
+#define TR_100_PIO_ACCESS_MASK 0x0000003f
+#define TR_100_PIO_ACCESS_SHIFT 0
+
+#define TR_100_UDMAREG_UDMA_MASK 0x0000ffff
+#define TR_100_UDMAREG_UDMA_EN 0x00000001
+
+
+/* 66Mhz cell, found in KeyLargo. Can do ultra mode 0 to 2 on
+ * 40 connector cable and to 4 on 80 connector one.
+ * Clock unit is 15ns (66Mhz)
+ *
+ * 3 Values can be programmed:
+ * - Write data setup, which appears to match the cycle time. They
+ * also call it DIOW setup.
+ * - Ready to pause time (from spec)
+ * - Address setup. That one is weird. I don't see where exactly
+ * it fits in UDMA cycles, I got it's name from an obscure piece
+ * of commented out code in Darwin. They leave it to 0, we do as
+ * well, despite a comment that would lead to think it has a
+ * min value of 45ns.
+ * Apple also add 60ns to the write data setup (or cycle time ?) on
+ * reads.
+ */
+#define TR_66_UDMA_MASK 0xfff00000
+#define TR_66_UDMA_EN 0x00100000 /* Enable Ultra mode for DMA */
+#define TR_66_PIO_ADDRSETUP_MASK 0xe0000000 /* Address setup */
+#define TR_66_PIO_ADDRSETUP_SHIFT 29
+#define TR_66_UDMA_RDY2PAUS_MASK 0x1e000000 /* Ready 2 pause time */
+#define TR_66_UDMA_RDY2PAUS_SHIFT 25
+#define TR_66_UDMA_WRDATASETUP_MASK 0x01e00000 /* Write data setup time */
+#define TR_66_UDMA_WRDATASETUP_SHIFT 21
+#define TR_66_MDMA_MASK 0x000ffc00
+#define TR_66_MDMA_RECOVERY_MASK 0x000f8000
+#define TR_66_MDMA_RECOVERY_SHIFT 15
+#define TR_66_MDMA_ACCESS_MASK 0x00007c00
+#define TR_66_MDMA_ACCESS_SHIFT 10
+#define TR_66_PIO_MASK 0xe00003ff
+#define TR_66_PIO_RECOVERY_MASK 0x000003e0
+#define TR_66_PIO_RECOVERY_SHIFT 5
+#define TR_66_PIO_ACCESS_MASK 0x0000001f
+#define TR_66_PIO_ACCESS_SHIFT 0
+
+/* 33Mhz cell, found in OHare, Heathrow (& Paddington) and KeyLargo
+ * Can do pio & mdma modes, clock unit is 30ns (33Mhz)
+ *
+ * The access time and recovery time can be programmed. Some older
+ * Darwin code base limit OHare to 150ns cycle time. I decided to do
+ * the same here fore safety against broken old hardware ;)
+ * The HalfTick bit, when set, adds half a clock (15ns) to the access
+ * time and removes one from recovery. It's not supported on KeyLargo
+ * implementation afaik. The E bit appears to be set for PIO mode 0 and
+ * is used to reach long timings used in this mode.
+ */
+#define TR_33_MDMA_MASK 0x003ff800
+#define TR_33_MDMA_RECOVERY_MASK 0x001f0000
+#define TR_33_MDMA_RECOVERY_SHIFT 16
+#define TR_33_MDMA_ACCESS_MASK 0x0000f800
+#define TR_33_MDMA_ACCESS_SHIFT 11
+#define TR_33_MDMA_HALFTICK 0x00200000
+#define TR_33_PIO_MASK 0x000007ff
+#define TR_33_PIO_E 0x00000400
+#define TR_33_PIO_RECOVERY_MASK 0x000003e0
+#define TR_33_PIO_RECOVERY_SHIFT 5
+#define TR_33_PIO_ACCESS_MASK 0x0000001f
+#define TR_33_PIO_ACCESS_SHIFT 0
+
+/*
+ * Interrupt register definitions. Only present on newer cells
+ * (Keylargo and later afaik) so we don't use it.
+ */
+#define IDE_INTR_DMA 0x80000000
+#define IDE_INTR_DEVICE 0x40000000
+
+/*
+ * FCR Register on Kauai. Not sure what bit 0x4 is ...
+ */
+#define KAUAI_FCR_UATA_MAGIC 0x00000004
+#define KAUAI_FCR_UATA_RESET_N 0x00000002
+#define KAUAI_FCR_UATA_ENABLE 0x00000001
+
+
+/* Allow up to 256 DBDMA commands per xfer */
+#define MAX_DCMDS 256
+
+/* Don't let a DMA segment go all the way to 64K */
+#define MAX_DBDMA_SEG 0xff00
+
+
+/*
+ * Wait 1s for disk to answer on IDE bus after a hard reset
+ * of the device (via GPIO/FCR).
+ *
+ * Some devices seem to "pollute" the bus even after dropping
+ * the BSY bit (typically some combo drives slave on the UDMA
+ * bus) after a hard reset. Since we hard reset all drives on
+ * KeyLargo ATA66, we have to keep that delay around. I may end
+ * up not hard resetting anymore on these and keep the delay only
+ * for older interfaces instead (we have to reset when coming
+ * from MacOS...) --BenH.
+ */
+#define IDE_WAKEUP_DELAY_MS 1000
+
+struct pata_macio_timing;
+
+struct pata_macio_priv {
+ int kind;
+ int aapl_bus_id;
+ int mediabay : 1;
+ struct device_node *node;
+ struct macio_dev *mdev;
+ struct pci_dev *pdev;
+ struct device *dev;
+ int irq;
+ u32 treg[2][2];
+ void __iomem *tfregs;
+ void __iomem *kauai_fcr;
+ struct dbdma_cmd * dma_table_cpu;
+ dma_addr_t dma_table_dma;
+ struct ata_host *host;
+ const struct pata_macio_timing *timings;
+};
+
+/* Previous variants of this driver used to calculate timings
+ * for various variants of the chip and use tables for others.
+ *
+ * Not only was this confusing, but in addition, it isn't clear
+ * whether our calculation code was correct. It didn't entirely
+ * match the darwin code and whatever documentation I could find
+ * on these cells
+ *
+ * I decided to entirely rely on a table instead for this version
+ * of the driver. Also, because I don't really care about derated
+ * modes and really old HW other than making it work, I'm not going
+ * to calculate / snoop timing values for something else than the
+ * standard modes.
+ */
+struct pata_macio_timing {
+ int mode;
+ u32 reg1; /* Bits to set in first timing reg */
+ u32 reg2; /* Bits to set in second timing reg */
+};
+
+static const struct pata_macio_timing pata_macio_ohare_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00074000, 0, },
+ { XFER_MW_DMA_1, 0x00221000, 0, },
+ { XFER_MW_DMA_2, 0x00211000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_heathrow_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00074000, 0, },
+ { XFER_MW_DMA_1, 0x00221000, 0, },
+ { XFER_MW_DMA_2, 0x00211000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kl33_timings[] = {
+ { XFER_PIO_0, 0x00000526, 0, },
+ { XFER_PIO_1, 0x00000085, 0, },
+ { XFER_PIO_2, 0x00000025, 0, },
+ { XFER_PIO_3, 0x00000025, 0, },
+ { XFER_PIO_4, 0x00000025, 0, },
+ { XFER_MW_DMA_0, 0x00084000, 0, },
+ { XFER_MW_DMA_1, 0x00021800, 0, },
+ { XFER_MW_DMA_2, 0x00011800, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kl66_timings[] = {
+ { XFER_PIO_0, 0x0000038c, 0, },
+ { XFER_PIO_1, 0x0000020a, 0, },
+ { XFER_PIO_2, 0x00000127, 0, },
+ { XFER_PIO_3, 0x000000c6, 0, },
+ { XFER_PIO_4, 0x00000065, 0, },
+ { XFER_MW_DMA_0, 0x00084000, 0, },
+ { XFER_MW_DMA_1, 0x00029800, 0, },
+ { XFER_MW_DMA_2, 0x00019400, 0, },
+ { XFER_UDMA_0, 0x19100000, 0, },
+ { XFER_UDMA_1, 0x14d00000, 0, },
+ { XFER_UDMA_2, 0x10900000, 0, },
+ { XFER_UDMA_3, 0x0c700000, 0, },
+ { XFER_UDMA_4, 0x0c500000, 0, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_kauai_timings[] = {
+ { XFER_PIO_0, 0x08000a92, 0, },
+ { XFER_PIO_1, 0x0800060f, 0, },
+ { XFER_PIO_2, 0x0800038b, 0, },
+ { XFER_PIO_3, 0x05000249, 0, },
+ { XFER_PIO_4, 0x04000148, 0, },
+ { XFER_MW_DMA_0, 0x00618000, 0, },
+ { XFER_MW_DMA_1, 0x00209000, 0, },
+ { XFER_MW_DMA_2, 0x00148000, 0, },
+ { XFER_UDMA_0, 0, 0x000070c1, },
+ { XFER_UDMA_1, 0, 0x00005d81, },
+ { XFER_UDMA_2, 0, 0x00004a61, },
+ { XFER_UDMA_3, 0, 0x00003a51, },
+ { XFER_UDMA_4, 0, 0x00002a31, },
+ { XFER_UDMA_5, 0, 0x00002921, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing pata_macio_shasta_timings[] = {
+ { XFER_PIO_0, 0x0a000c97, 0, },
+ { XFER_PIO_1, 0x07000712, 0, },
+ { XFER_PIO_2, 0x040003cd, 0, },
+ { XFER_PIO_3, 0x0500028b, 0, },
+ { XFER_PIO_4, 0x0400010a, 0, },
+ { XFER_MW_DMA_0, 0x00820800, 0, },
+ { XFER_MW_DMA_1, 0x0028b000, 0, },
+ { XFER_MW_DMA_2, 0x001ca000, 0, },
+ { XFER_UDMA_0, 0, 0x00035901, },
+ { XFER_UDMA_1, 0, 0x000348b1, },
+ { XFER_UDMA_2, 0, 0x00033881, },
+ { XFER_UDMA_3, 0, 0x00033861, },
+ { XFER_UDMA_4, 0, 0x00033841, },
+ { XFER_UDMA_5, 0, 0x00033031, },
+ { XFER_UDMA_6, 0, 0x00033021, },
+ { -1, 0, 0 }
+};
+
+static const struct pata_macio_timing *pata_macio_find_timing(
+ struct pata_macio_priv *priv,
+ int mode)
+{
+ int i;
+
+ for (i = 0; priv->timings[i].mode > 0; i++) {
+ if (priv->timings[i].mode == mode)
+ return &priv->timings[i];
+ }
+ return NULL;
+}
+
+
+static void pata_macio_apply_timings(struct ata_port *ap, unsigned int device)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ void __iomem *rbase = ap->ioaddr.cmd_addr;
+
+ if (priv->kind == controller_sh_ata6 ||
+ priv->kind == controller_un_ata6 ||
+ priv->kind == controller_k2_ata6) {
+ writel(priv->treg[device][0], rbase + IDE_KAUAI_PIO_CONFIG);
+ writel(priv->treg[device][1], rbase + IDE_KAUAI_ULTRA_CONFIG);
+ } else
+ writel(priv->treg[device][0], rbase + IDE_TIMING_CONFIG);
+}
+
+static void pata_macio_dev_select(struct ata_port *ap, unsigned int device)
+{
+ ata_sff_dev_select(ap, device);
+
+ /* Apply timings */
+ pata_macio_apply_timings(ap, device);
+}
+
+static void pata_macio_set_timings(struct ata_port *ap,
+ struct ata_device *adev)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ const struct pata_macio_timing *t;
+
+ dev_dbg(priv->dev, "Set timings: DEV=%d,PIO=0x%x (%s),DMA=0x%x (%s)\n",
+ adev->devno,
+ adev->pio_mode,
+ ata_mode_string(ata_xfer_mode2mask(adev->pio_mode)),
+ adev->dma_mode,
+ ata_mode_string(ata_xfer_mode2mask(adev->dma_mode)));
+
+ /* First clear timings */
+ priv->treg[adev->devno][0] = priv->treg[adev->devno][1] = 0;
+
+ /* Now get the PIO timings */
+ t = pata_macio_find_timing(priv, adev->pio_mode);
+ if (t == NULL) {
+ dev_warn(priv->dev, "Invalid PIO timing requested: 0x%x\n",
+ adev->pio_mode);
+ t = pata_macio_find_timing(priv, XFER_PIO_0);
+ }
+ BUG_ON(t == NULL);
+
+ /* PIO timings only ever use the first treg */
+ priv->treg[adev->devno][0] |= t->reg1;
+
+ /* Now get DMA timings */
+ t = pata_macio_find_timing(priv, adev->dma_mode);
+ if (t == NULL || (t->reg1 == 0 && t->reg2 == 0)) {
+ dev_dbg(priv->dev, "DMA timing not set yet, using MW_DMA_0\n");
+ t = pata_macio_find_timing(priv, XFER_MW_DMA_0);
+ }
+ BUG_ON(t == NULL);
+
+ /* DMA timings can use both tregs */
+ priv->treg[adev->devno][0] |= t->reg1;
+ priv->treg[adev->devno][1] |= t->reg2;
+
+ dev_dbg(priv->dev, " -> %08x %08x\n",
+ priv->treg[adev->devno][0],
+ priv->treg[adev->devno][1]);
+
+ /* Apply to hardware */
+ pata_macio_apply_timings(ap, adev->devno);
+}
+
+/*
+ * Blast some well known "safe" values to the timing registers at init or
+ * wakeup from sleep time, before we do real calculation
+ */
+static void pata_macio_default_timings(struct pata_macio_priv *priv)
+{
+ unsigned int value, value2 = 0;
+
+ switch(priv->kind) {
+ case controller_sh_ata6:
+ value = 0x0a820c97;
+ value2 = 0x00033031;
+ break;
+ case controller_un_ata6:
+ case controller_k2_ata6:
+ value = 0x08618a92;
+ value2 = 0x00002921;
+ break;
+ case controller_kl_ata4:
+ value = 0x0008438c;
+ break;
+ case controller_kl_ata3:
+ value = 0x00084526;
+ break;
+ case controller_heathrow:
+ case controller_ohare:
+ default:
+ value = 0x00074526;
+ break;
+ }
+ priv->treg[0][0] = priv->treg[1][0] = value;
+ priv->treg[0][1] = priv->treg[1][1] = value2;
+}
+
+static int pata_macio_cable_detect(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ /* Get cable type from device-tree */
+ if (priv->kind == controller_kl_ata4 ||
+ priv->kind == controller_un_ata6 ||
+ priv->kind == controller_k2_ata6 ||
+ priv->kind == controller_sh_ata6) {
+ const char* cable = of_get_property(priv->node, "cable-type",
+ NULL);
+ struct device_node *root = of_find_node_by_path("/");
+ const char *model = of_get_property(root, "model", NULL);
+
+ if (cable && !strncmp(cable, "80-", 3)) {
+ /* Some drives fail to detect 80c cable in PowerBook
+ * These machine use proprietary short IDE cable
+ * anyway
+ */
+ if (!strncmp(model, "PowerBook", 9))
+ return ATA_CBL_PATA40_SHORT;
+ else
+ return ATA_CBL_PATA80;
+ }
+ }
+
+ /* G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they always have a 80 conductor cable, this seem to
+ * be always the case unless the user mucked around
+ */
+ if (of_device_is_compatible(priv->node, "K2-UATA") ||
+ of_device_is_compatible(priv->node, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ /* Anything else is 40 connectors */
+ return ATA_CBL_PATA40;
+}
+
+static void pata_macio_qc_prep(struct ata_queued_cmd *qc)
+{
+ unsigned int write = (qc->tf.flags & ATA_TFLAG_WRITE);
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct scatterlist *sg;
+ struct dbdma_cmd *table;
+ unsigned int si, pi;
+
+ dev_dbgdma(priv->dev, "%s: qc %p flags %lx, write %d dev %d\n",
+ __func__, qc, qc->flags, write, qc->dev->devno);
+
+ if (!(qc->flags & ATA_QCFLAG_DMAMAP))
+ return;
+
+ table = (struct dbdma_cmd *) priv->dma_table_cpu;
+
+ pi = 0;
+ for_each_sg(qc->sg, sg, qc->n_elem, si) {
+ u32 addr, sg_len, len;
+
+ /* determine if physical DMA addr spans 64K boundary.
+ * Note h/w doesn't support 64-bit, so we unconditionally
+ * truncate dma_addr_t to u32.
+ */
+ addr = (u32) sg_dma_address(sg);
+ sg_len = sg_dma_len(sg);
+
+ while (sg_len) {
+ /* table overflow should never happen */
+ BUG_ON (pi++ >= MAX_DCMDS);
+
+ len = (sg_len < MAX_DBDMA_SEG) ? sg_len : MAX_DBDMA_SEG;
+ st_le16(&table->command, write ? OUTPUT_MORE: INPUT_MORE);
+ st_le16(&table->req_count, len);
+ st_le32(&table->phy_addr, addr);
+ table->cmd_dep = 0;
+ table->xfer_status = 0;
+ table->res_count = 0;
+ addr += len;
+ sg_len -= len;
+ ++table;
+ }
+ }
+
+ /* Should never happen according to Tejun */
+ BUG_ON(!pi);
+
+ /* Convert the last command to an input/output */
+ table--;
+ st_le16(&table->command, write ? OUTPUT_LAST: INPUT_LAST);
+ table++;
+
+ /* Add the stop command to the end of the list */
+ memset(table, 0, sizeof(struct dbdma_cmd));
+ st_le16(&table->command, DBDMA_STOP);
+
+ dev_dbgdma(priv->dev, "%s: %d DMA list entries\n", __func__, pi);
+}
+
+
+static void pata_macio_freeze(struct ata_port *ap)
+{
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+
+ if (dma_regs) {
+ unsigned int timeout = 1000000;
+
+ /* Make sure DMA controller is stopped */
+ writel((RUN|PAUSE|FLUSH|WAKE|DEAD) << 16, &dma_regs->control);
+ while (--timeout && (readl(&dma_regs->status) & RUN))
+ udelay(1);
+ }
+
+ ata_sff_freeze(ap);
+}
+
+
+static void pata_macio_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ int dev = qc->dev->devno;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ /* Make sure DMA commands updates are visible */
+ writel(priv->dma_table_dma, &dma_regs->cmdptr);
+
+ /* On KeyLargo 66Mhz cell, we need to add 60ns to wrDataSetup on
+ * UDMA reads
+ */
+ if (priv->kind == controller_kl_ata4 &&
+ (priv->treg[dev][0] & TR_66_UDMA_EN)) {
+ void __iomem *rbase = ap->ioaddr.cmd_addr;
+ u32 reg = priv->treg[dev][0];
+
+ if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ reg += 0x00800000;
+ writel(reg, rbase + IDE_TIMING_CONFIG);
+ }
+
+ /* issue r/w command */
+ ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+static void pata_macio_bmdma_start(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ writel((RUN << 16) | RUN, &dma_regs->control);
+ /* Make sure it gets to the controller right now */
+ (void)readl(&dma_regs->control);
+}
+
+static void pata_macio_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ unsigned int timeout = 1000000;
+
+ dev_dbgdma(priv->dev, "%s: qc %p\n", __func__, qc);
+
+ /* Stop the DMA engine and wait for it to full halt */
+ writel (((RUN|WAKE|DEAD) << 16), &dma_regs->control);
+ while (--timeout && (readl(&dma_regs->status) & RUN))
+ udelay(1);
+}
+
+static u8 pata_macio_bmdma_status(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+ struct dbdma_regs __iomem *dma_regs = ap->ioaddr.bmdma_addr;
+ u32 dstat, rstat = ATA_DMA_INTR;
+ unsigned long timeout = 0;
+
+ dstat = readl(&dma_regs->status);
+
+ dev_dbgdma(priv->dev, "%s: dstat=%x\n", __func__, dstat);
+
+ /* We have two things to deal with here:
+ *
+ * - The dbdma won't stop if the command was started
+ * but completed with an error without transferring all
+ * datas. This happens when bad blocks are met during
+ * a multi-block transfer.
+ *
+ * - The dbdma fifo hasn't yet finished flushing to
+ * to system memory when the disk interrupt occurs.
+ *
+ */
+
+ /* First check for errors */
+ if ((dstat & (RUN|DEAD)) != RUN)
+ rstat |= ATA_DMA_ERR;
+
+ /* If ACTIVE is cleared, the STOP command has been hit and
+ * the transfer is complete. If not, we have to flush the
+ * channel.
+ */
+ if ((dstat & ACTIVE) == 0)
+ return rstat;
+
+ dev_dbgdma(priv->dev, "%s: DMA still active, flushing...\n", __func__);
+
+ /* If dbdma didn't execute the STOP command yet, the
+ * active bit is still set. We consider that we aren't
+ * sharing interrupts (which is hopefully the case with
+ * those controllers) and so we just try to flush the
+ * channel for pending data in the fifo
+ */
+ udelay(1);
+ writel((FLUSH << 16) | FLUSH, &dma_regs->control);
+ for (;;) {
+ udelay(1);
+ dstat = readl(&dma_regs->status);
+ if ((dstat & FLUSH) == 0)
+ break;
+ if (++timeout > 1000) {
+ dev_warn(priv->dev, "timeout flushing DMA\n");
+ rstat |= ATA_DMA_ERR;
+ break;
+ }
+ }
+ return rstat;
+}
+
+/* port_start is when we allocate the DMA command list */
+static int pata_macio_port_start(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ if (ap->ioaddr.bmdma_addr == NULL)
+ return 0;
+
+ /* Allocate space for the DBDMA commands.
+ *
+ * The +2 is +1 for the stop command and +1 to allow for
+ * aligning the start address to a multiple of 16 bytes.
+ */
+ priv->dma_table_cpu =
+ dmam_alloc_coherent(priv->dev,
+ (MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
+ &priv->dma_table_dma, GFP_KERNEL);
+ if (priv->dma_table_cpu == NULL) {
+ dev_err(priv->dev, "Unable to allocate DMA command list\n");
+ ap->ioaddr.bmdma_addr = NULL;
+ }
+ return 0;
+}
+
+static void pata_macio_irq_clear(struct ata_port *ap)
+{
+ struct pata_macio_priv *priv = ap->private_data;
+
+ /* Nothing to do here */
+
+ dev_dbgdma(priv->dev, "%s\n", __func__);
+}
+
+static void pata_macio_reset_hw(struct pata_macio_priv *priv, int resume)
+{
+ dev_dbg(priv->dev, "Enabling & resetting... \n");
+
+ if (priv->mediabay)
+ return;
+
+ if (priv->kind == controller_ohare && !resume) {
+ /* The code below is having trouble on some ohare machines
+ * (timing related ?). Until I can put my hand on one of these
+ * units, I keep the old way
+ */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node, 0, 1);
+ } else {
+ int rc;
+
+ /* Reset and enable controller */
+ rc = ppc_md.feature_call(PMAC_FTR_IDE_RESET,
+ priv->node, priv->aapl_bus_id, 1);
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE,
+ priv->node, priv->aapl_bus_id, 1);
+ msleep(10);
+ /* Only bother waiting if there's a reset control */
+ if (rc == 0) {
+ ppc_md.feature_call(PMAC_FTR_IDE_RESET,
+ priv->node, priv->aapl_bus_id, 0);
+ msleep(IDE_WAKEUP_DELAY_MS);
+ }
+ }
+
+ /* If resuming a PCI device, restore the config space here */
+ if (priv->pdev && resume) {
+ int rc;
+
+ pci_restore_state(priv->pdev);
+ rc = pcim_enable_device(priv->pdev);
+ if (rc)
+ dev_printk(KERN_ERR, &priv->pdev->dev,
+ "Failed to enable device after resume (%d)\n", rc);
+ else
+ pci_set_master(priv->pdev);
+ }
+
+ /* On Kauai, initialize the FCR. We don't perform a reset, doesn't really
+ * seem necessary and speeds up the boot process
+ */
+ if (priv->kauai_fcr)
+ writel(KAUAI_FCR_UATA_MAGIC |
+ KAUAI_FCR_UATA_RESET_N |
+ KAUAI_FCR_UATA_ENABLE, priv->kauai_fcr);
+}
+
+/* Hook the standard slave config to fixup some HW related alignment
+ * restrictions
+ */
+static int pata_macio_slave_config(struct scsi_device *sdev)
+{
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct pata_macio_priv *priv = ap->private_data;
+ struct ata_device *dev;
+ u16 cmd;
+ int rc;
+
+ /* First call original */
+ rc = ata_scsi_slave_config(sdev);
+ if (rc)
+ return rc;
+
+ /* This is lifted from sata_nv */
+ dev = &ap->link.device[sdev->id];
+
+ /* OHare has issues with non cache aligned DMA on some chipsets */
+ if (priv->kind == controller_ohare) {
+ blk_queue_update_dma_alignment(sdev->request_queue, 31);
+ blk_queue_update_dma_pad(sdev->request_queue, 31);
+
+ /* Tell the world about it */
+ ata_dev_printk(dev, KERN_INFO, "OHare alignment limits applied\n");
+ return 0;
+ }
+
+ /* We only have issues with ATAPI */
+ if (dev->class != ATA_DEV_ATAPI)
+ return 0;
+
+ /* Shasta and K2 seem to have "issues" with reads ... */
+ if (priv->kind == controller_sh_ata6 || priv->kind == controller_k2_ata6) {
+ /* Allright these are bad, apply restrictions */
+ blk_queue_update_dma_alignment(sdev->request_queue, 15);
+ blk_queue_update_dma_pad(sdev->request_queue, 15);
+
+ /* We enable MWI and hack cache line size directly here, this
+ * is specific to this chipset and not normal values, we happen
+ * to somewhat know what we are doing here (which is basically
+ * to do the same Apple does and pray they did not get it wrong :-)
+ */
+ BUG_ON(!priv->pdev);
+ pci_write_config_byte(priv->pdev, PCI_CACHE_LINE_SIZE, 0x08);
+ pci_read_config_word(priv->pdev, PCI_COMMAND, &cmd);
+ pci_write_config_word(priv->pdev, PCI_COMMAND,
+ cmd | PCI_COMMAND_INVALIDATE);
+
+ /* Tell the world about it */
+ ata_dev_printk(dev, KERN_INFO,
+ "K2/Shasta alignment limits applied\n");
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_do_suspend(struct pata_macio_priv *priv, pm_message_t mesg)
+{
+ int rc;
+
+ /* First, core libata suspend to do most of the work */
+ rc = ata_host_suspend(priv->host, mesg);
+ if (rc)
+ return rc;
+
+ /* Restore to default timings */
+ pata_macio_default_timings(priv);
+
+ /* Mask interrupt. Not strictly necessary but old driver did
+ * it and I'd rather not change that here */
+ disable_irq(priv->irq);
+
+ /* The media bay will handle itself just fine */
+ if (priv->mediabay)
+ return 0;
+
+ /* Kauai has bus control FCRs directly here */
+ if (priv->kauai_fcr) {
+ u32 fcr = readl(priv->kauai_fcr);
+ fcr &= ~(KAUAI_FCR_UATA_RESET_N | KAUAI_FCR_UATA_ENABLE);
+ writel(fcr, priv->kauai_fcr);
+ }
+
+ /* For PCI, save state and disable DMA. No need to call
+ * pci_set_power_state(), the HW doesn't do D states that
+ * way, the platform code will take care of suspending the
+ * ASIC properly
+ */
+ if (priv->pdev) {
+ pci_save_state(priv->pdev);
+ pci_disable_device(priv->pdev);
+ }
+
+ /* Disable the bus on older machines and the cell on kauai */
+ ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, priv->node,
+ priv->aapl_bus_id, 0);
+
+ return 0;
+}
+
+static int pata_macio_do_resume(struct pata_macio_priv *priv)
+{
+ /* Reset and re-enable the HW */
+ pata_macio_reset_hw(priv, 1);
+
+ /* Sanitize drive timings */
+ pata_macio_apply_timings(priv->host->ports[0], 0);
+
+ /* We want our IRQ back ! */
+ enable_irq(priv->irq);
+
+ /* Let the libata core take it from there */
+ ata_host_resume(priv->host);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static struct scsi_host_template pata_macio_sht = {
+ ATA_BASE_SHT(DRV_NAME),
+ .sg_tablesize = MAX_DCMDS,
+ /* We may not need that strict one */
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = pata_macio_slave_config,
+};
+
+static struct ata_port_operations pata_macio_ops = {
+ .inherits = &ata_sff_port_ops,
+
+ .freeze = pata_macio_freeze,
+ .set_piomode = pata_macio_set_timings,
+ .set_dmamode = pata_macio_set_timings,
+ .cable_detect = pata_macio_cable_detect,
+ .sff_dev_select = pata_macio_dev_select,
+ .qc_prep = pata_macio_qc_prep,
+ .mode_filter = ata_bmdma_mode_filter,
+ .bmdma_setup = pata_macio_bmdma_setup,
+ .bmdma_start = pata_macio_bmdma_start,
+ .bmdma_stop = pata_macio_bmdma_stop,
+ .bmdma_status = pata_macio_bmdma_status,
+ .port_start = pata_macio_port_start,
+ .sff_irq_clear = pata_macio_irq_clear,
+};
+
+static void __devinit pata_macio_invariants(struct pata_macio_priv *priv)
+{
+ const int *bidp;
+
+ /* Identify the type of controller */
+ if (of_device_is_compatible(priv->node, "shasta-ata")) {
+ priv->kind = controller_sh_ata6;
+ priv->timings = pata_macio_shasta_timings;
+ } else if (of_device_is_compatible(priv->node, "kauai-ata")) {
+ priv->kind = controller_un_ata6;
+ priv->timings = pata_macio_kauai_timings;
+ } else if (of_device_is_compatible(priv->node, "K2-UATA")) {
+ priv->kind = controller_k2_ata6;
+ priv->timings = pata_macio_kauai_timings;
+ } else if (of_device_is_compatible(priv->node, "keylargo-ata")) {
+ if (strcmp(priv->node->name, "ata-4") == 0) {
+ priv->kind = controller_kl_ata4;
+ priv->timings = pata_macio_kl66_timings;
+ } else {
+ priv->kind = controller_kl_ata3;
+ priv->timings = pata_macio_kl33_timings;
+ }
+ } else if (of_device_is_compatible(priv->node, "heathrow-ata")) {
+ priv->kind = controller_heathrow;
+ priv->timings = pata_macio_heathrow_timings;
+ } else {
+ priv->kind = controller_ohare;
+ priv->timings = pata_macio_ohare_timings;
+ }
+
+ /* XXX FIXME --- setup priv->mediabay here */
+
+ /* Get Apple bus ID (for clock and ASIC control) */
+ bidp = of_get_property(priv->node, "AAPL,bus-id", NULL);
+ priv->aapl_bus_id = bidp ? *bidp : 0;
+
+ /* Fixup missing Apple bus ID in case of media-bay */
+ if (priv->mediabay && bidp == 0)
+ priv->aapl_bus_id = 1;
+}
+
+static void __devinit pata_macio_setup_ios(struct ata_ioports *ioaddr,
+ void __iomem * base,
+ void __iomem * dma)
+{
+ /* cmd_addr is the base of regs for that port */
+ ioaddr->cmd_addr = base;
+
+ /* taskfile registers */
+ ioaddr->data_addr = base + (ATA_REG_DATA << 4);
+ ioaddr->error_addr = base + (ATA_REG_ERR << 4);
+ ioaddr->feature_addr = base + (ATA_REG_FEATURE << 4);
+ ioaddr->nsect_addr = base + (ATA_REG_NSECT << 4);
+ ioaddr->lbal_addr = base + (ATA_REG_LBAL << 4);
+ ioaddr->lbam_addr = base + (ATA_REG_LBAM << 4);
+ ioaddr->lbah_addr = base + (ATA_REG_LBAH << 4);
+ ioaddr->device_addr = base + (ATA_REG_DEVICE << 4);
+ ioaddr->status_addr = base + (ATA_REG_STATUS << 4);
+ ioaddr->command_addr = base + (ATA_REG_CMD << 4);
+ ioaddr->altstatus_addr = base + 0x160;
+ ioaddr->ctl_addr = base + 0x160;
+ ioaddr->bmdma_addr = dma;
+}
+
+static void __devinit pmac_macio_calc_timing_masks(struct pata_macio_priv *priv,
+ struct ata_port_info *pinfo)
+{
+ int i = 0;
+
+ pinfo->pio_mask = 0;
+ pinfo->mwdma_mask = 0;
+ pinfo->udma_mask = 0;
+
+ while (priv->timings[i].mode > 0) {
+ unsigned int mask = 1U << (priv->timings[i].mode & 0x0f);
+ switch(priv->timings[i].mode & 0xf0) {
+ case 0x00: /* PIO */
+ pinfo->pio_mask |= (mask >> 8);
+ break;
+ case 0x20: /* MWDMA */
+ pinfo->mwdma_mask |= mask;
+ break;
+ case 0x40: /* UDMA */
+ pinfo->udma_mask |= mask;
+ break;
+ }
+ i++;
+ }
+ dev_dbg(priv->dev, "Supported masks: PIO=%lx, MWDMA=%lx, UDMA=%lx\n",
+ pinfo->pio_mask, pinfo->mwdma_mask, pinfo->udma_mask);
+}
+
+static int __devinit pata_macio_common_init(struct pata_macio_priv *priv,
+ resource_size_t tfregs,
+ resource_size_t dmaregs,
+ resource_size_t fcregs,
+ unsigned long irq)
+{
+ struct ata_port_info pinfo;
+ const struct ata_port_info *ppi[] = { &pinfo, NULL };
+ void __iomem *dma_regs = NULL;
+
+ /* Fill up privates with various invariants collected from the
+ * device-tree
+ */
+ pata_macio_invariants(priv);
+
+ /* Make sure we have sane initial timings in the cache */
+ pata_macio_default_timings(priv);
+
+ /* Not sure what the real max is but we know it's less than 64K, let's
+ * use 64K minus 256
+ */
+ dma_set_max_seg_size(priv->dev, MAX_DBDMA_SEG);
+
+ /* Allocate libata host for 1 port */
+ memset(&pinfo, 0, sizeof(struct ata_port_info));
+ pmac_macio_calc_timing_masks(priv, &pinfo);
+ pinfo.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO |
+ ATA_FLAG_NO_LEGACY;
+ pinfo.port_ops = &pata_macio_ops;
+ pinfo.private_data = priv;
+
+ priv->host = ata_host_alloc_pinfo(priv->dev, ppi, 1);
+ if (priv->host == NULL) {
+ dev_err(priv->dev, "Failed to allocate ATA port structure\n");
+ return -ENOMEM;
+ }
+
+ /* Setup the private data in host too */
+ priv->host->private_data = priv;
+
+ /* Map base registers */
+ priv->tfregs = devm_ioremap(priv->dev, tfregs, 0x100);
+ if (priv->tfregs == NULL) {
+ dev_err(priv->dev, "Failed to map ATA ports\n");
+ return -ENOMEM;
+ }
+ priv->host->iomap = &priv->tfregs;
+
+ /* Map DMA regs */
+ if (dmaregs != 0) {
+ dma_regs = devm_ioremap(priv->dev, dmaregs,
+ sizeof(struct dbdma_regs));
+ if (dma_regs == NULL)
+ dev_warn(priv->dev, "Failed to map ATA DMA registers\n");
+ }
+
+ /* If chip has local feature control, map those regs too */
+ if (fcregs != 0) {
+ priv->kauai_fcr = devm_ioremap(priv->dev, fcregs, 4);
+ if (priv->kauai_fcr == NULL) {
+ dev_err(priv->dev, "Failed to map ATA FCR register\n");
+ return -ENOMEM;
+ }
+ }
+
+ /* Setup port data structure */
+ pata_macio_setup_ios(&priv->host->ports[0]->ioaddr,
+ priv->tfregs, dma_regs);
+ priv->host->ports[0]->private_data = priv;
+
+ /* hard-reset the controller */
+ pata_macio_reset_hw(priv, 0);
+ pata_macio_apply_timings(priv->host->ports[0], 0);
+
+ /* Enable bus master if necessary */
+ if (priv->pdev && dma_regs)
+ pci_set_master(priv->pdev);
+
+ dev_info(priv->dev, "Activating pata-macio chipset %s, Apple bus ID %d\n",
+ macio_ata_names[priv->kind], priv->aapl_bus_id);
+
+ /* Start it up */
+ priv->irq = irq;
+ return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0,
+ &pata_macio_sht);
+}
+
+static int __devinit pata_macio_attach(struct macio_dev *mdev,
+ const struct of_device_id *match)
+{
+ struct pata_macio_priv *priv;
+ resource_size_t tfregs, dmaregs = 0;
+ unsigned long irq;
+ int rc;
+
+ /* Check for broken device-trees */
+ if (macio_resource_count(mdev) == 0) {
+ dev_err(&mdev->ofdev.dev,
+ "No addresses for controller\n");
+ return -ENXIO;
+ }
+
+ /* Enable managed resources */
+ macio_enable_devres(mdev);
+
+ /* Allocate and init private data structure */
+ priv = devm_kzalloc(&mdev->ofdev.dev,
+ sizeof(struct pata_macio_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&mdev->ofdev.dev,
+ "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+ priv->node = of_node_get(mdev->ofdev.node);
+ priv->mdev = mdev;
+ priv->dev = &mdev->ofdev.dev;
+
+ /* Request memory resource for taskfile registers */
+ if (macio_request_resource(mdev, 0, "pata-macio")) {
+ dev_err(&mdev->ofdev.dev,
+ "Cannot obtain taskfile resource\n");
+ return -EBUSY;
+ }
+ tfregs = macio_resource_start(mdev, 0);
+
+ /* Request resources for DMA registers if any */
+ if (macio_resource_count(mdev) >= 2) {
+ if (macio_request_resource(mdev, 1, "pata-macio-dma"))
+ dev_err(&mdev->ofdev.dev,
+ "Cannot obtain DMA resource\n");
+ else
+ dmaregs = macio_resource_start(mdev, 1);
+ }
+
+ /*
+ * Fixup missing IRQ for some old implementations with broken
+ * device-trees.
+ *
+ * This is a bit bogus, it should be fixed in the device-tree itself,
+ * via the existing macio fixups, based on the type of interrupt
+ * controller in the machine. However, I have no test HW for this case,
+ * and this trick works well enough on those old machines...
+ */
+ if (macio_irq_count(mdev) == 0) {
+ dev_warn(&mdev->ofdev.dev,
+ "No interrupts for controller, using 13\n");
+ irq = irq_create_mapping(NULL, 13);
+ } else
+ irq = macio_irq(mdev, 0);
+
+ /* Prevvent media bay callbacks until fully registered */
+ lock_media_bay(priv->mdev->media_bay);
+
+ /* Get register addresses and call common initialization */
+ rc = pata_macio_common_init(priv,
+ tfregs, /* Taskfile regs */
+ dmaregs, /* DBDMA regs */
+ 0, /* Feature control */
+ irq);
+ unlock_media_bay(priv->mdev->media_bay);
+
+ return rc;
+}
+
+static int __devexit pata_macio_detach(struct macio_dev *mdev)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+ struct pata_macio_priv *priv = host->private_data;
+
+ lock_media_bay(priv->mdev->media_bay);
+
+ /* Make sure the mediabay callback doesn't try to access
+ * dead stuff
+ */
+ priv->host->private_data = NULL;
+
+ ata_host_detach(host);
+
+ unlock_media_bay(priv->mdev->media_bay);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_suspend(struct macio_dev *mdev, pm_message_t mesg)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+
+ return pata_macio_do_suspend(host->private_data, mesg);
+}
+
+static int pata_macio_resume(struct macio_dev *mdev)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+
+ return pata_macio_do_resume(host->private_data);
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PMAC_MEDIABAY
+static void pata_macio_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ struct ata_host *host = macio_get_drvdata(mdev);
+ struct ata_port *ap;
+ struct ata_eh_info *ehi;
+ struct ata_device *dev;
+ unsigned long flags;
+
+ if (!host || !host->private_data)
+ return;
+ ap = host->ports[0];
+ spin_lock_irqsave(ap->lock, flags);
+ ehi = &ap->link.eh_info;
+ if (mb_state == MB_CD) {
+ ata_ehi_push_desc(ehi, "mediabay plug");
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ } else {
+ ata_ehi_push_desc(ehi, "mediabay unplug");
+ ata_for_each_dev(dev, &ap->link, ALL)
+ dev->flags |= ATA_DFLAG_DETACH;
+ ata_port_abort(ap);
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+
+}
+#endif /* CONFIG_PMAC_MEDIABAY */
+
+
+static int __devinit pata_macio_pci_attach(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct pata_macio_priv *priv;
+ struct device_node *np;
+ resource_size_t rbase;
+
+ /* We cannot use a MacIO controller without its OF device node */
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL) {
+ dev_err(&pdev->dev,
+ "Cannot find OF device node for controller\n");
+ return -ENODEV;
+ }
+
+ /* Check that it can be enabled */
+ if (pcim_enable_device(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot enable controller PCI device\n");
+ return -ENXIO;
+ }
+
+ /* Allocate and init private data structure */
+ priv = devm_kzalloc(&pdev->dev,
+ sizeof(struct pata_macio_priv), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&pdev->dev,
+ "Failed to allocate private memory\n");
+ return -ENOMEM;
+ }
+ priv->node = of_node_get(np);
+ priv->pdev = pdev;
+ priv->dev = &pdev->dev;
+
+ /* Get MMIO regions */
+ if (pci_request_regions(pdev, "pata-macio")) {
+ dev_err(&pdev->dev,
+ "Cannot obtain PCI resources\n");
+ return -EBUSY;
+ }
+
+ /* Get register addresses and call common initialization */
+ rbase = pci_resource_start(pdev, 0);
+ if (pata_macio_common_init(priv,
+ rbase + 0x2000, /* Taskfile regs */
+ rbase + 0x1000, /* DBDMA regs */
+ rbase, /* Feature control */
+ pdev->irq))
+ return -ENXIO;
+
+ return 0;
+}
+
+static void __devexit pata_macio_pci_detach(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ ata_host_detach(host);
+}
+
+#ifdef CONFIG_PM
+
+static int pata_macio_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ return pata_macio_do_suspend(host->private_data, mesg);
+}
+
+static int pata_macio_pci_resume(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+
+ return pata_macio_do_resume(host->private_data);
+}
+
+#endif /* CONFIG_PM */
+
+static struct of_device_id pata_macio_match[] =
+{
+ {
+ .name = "IDE",
+ },
+ {
+ .name = "ATA",
+ },
+ {
+ .type = "ide",
+ },
+ {
+ .type = "ata",
+ },
+ {},
+};
+
+static struct macio_driver pata_macio_driver =
+{
+ .name = "pata-macio",
+ .match_table = pata_macio_match,
+ .probe = pata_macio_attach,
+ .remove = pata_macio_detach,
+#ifdef CONFIG_PM
+ .suspend = pata_macio_suspend,
+ .resume = pata_macio_resume,
+#endif
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = pata_macio_mb_event,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+
+static const struct pci_device_id pata_macio_pci_match[] = {
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_SH_ATA), 0 },
+ { PCI_VDEVICE(APPLE, PCI_DEVICE_ID_APPLE_IPID2_ATA), 0 },
+ {},
+};
+
+static struct pci_driver pata_macio_pci_driver = {
+ .name = "pata-pci-macio",
+ .id_table = pata_macio_pci_match,
+ .probe = pata_macio_pci_attach,
+ .remove = pata_macio_pci_detach,
+#ifdef CONFIG_PM
+ .suspend = pata_macio_pci_suspend,
+ .resume = pata_macio_pci_resume,
+#endif
+ .driver = {
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_DEVICE_TABLE(pci, pata_macio_pci_match);
+
+
+static int __init pata_macio_init(void)
+{
+ int rc;
+
+ if (!machine_is(powermac))
+ return -ENODEV;
+
+ rc = pci_register_driver(&pata_macio_pci_driver);
+ if (rc)
+ return rc;
+ rc = macio_register_driver(&pata_macio_driver);
+ if (rc) {
+ pci_unregister_driver(&pata_macio_pci_driver);
+ return rc;
+ }
+ return 0;
+}
+
+static void __exit pata_macio_exit(void)
+{
+ macio_unregister_driver(&pata_macio_driver);
+ pci_unregister_driver(&pata_macio_pci_driver);
+}
+
+module_init(pata_macio_init);
+module_exit(pata_macio_exit);
+
+MODULE_AUTHOR("Benjamin Herrenschmidt");
+MODULE_DESCRIPTION("Apple MacIO PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
{ PCI_VDEVICE(VIA, 0x9000), vt8251 },
- { PCI_VDEVICE(VIA, 0x9040), vt8251 },
{ } /* terminate list */
};
struct cpu *cpu = container_of(dev, struct cpu, sysdev);
ssize_t ret;
+ cpu_hotplug_driver_lock();
switch (buf[0]) {
case '0':
ret = cpu_down(cpu->sysdev.id);
default:
ret = -EINVAL;
}
+ cpu_hotplug_driver_unlock();
if (ret >= 0)
ret = count;
per_cpu(cpu_sys_devices, logical_cpu) = NULL;
return;
}
+
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+static ssize_t cpu_probe_store(struct class *class, const char *buf,
+ size_t count)
+{
+ return arch_cpu_probe(buf, count);
+}
+
+static ssize_t cpu_release_store(struct class *class, const char *buf,
+ size_t count)
+{
+ return arch_cpu_release(buf, count);
+}
+
+static CLASS_ATTR(probe, S_IWUSR, NULL, cpu_probe_store);
+static CLASS_ATTR(release, S_IWUSR, NULL, cpu_release_store);
+
+int __init cpu_probe_release_init(void)
+{
+ int rc;
+
+ rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+ &class_attr_probe.attr);
+ if (!rc)
+ rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+ &class_attr_release.attr);
+
+ return rc;
+}
+device_initcall(cpu_probe_release_init);
+#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */
+
#else /* ... !CONFIG_HOTPLUG_CPU */
static inline void register_cpu_control(struct cpu *cpu)
{
int ejected;
wait_queue_head_t wait;
int wanted;
- struct device_node* media_bay; /* NULL when not in bay */
+ struct macio_dev *mdev;
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
};
static void do_fd_request(struct request_queue * q)
{
int i;
- for(i=0;i<floppy_count;i++)
- {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (floppy_states[i].media_bay &&
- check_media_bay(floppy_states[i].media_bay, MB_FD))
+
+ for(i=0; i<floppy_count; i++) {
+ struct floppy_state *fs = &floppy_states[i];
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
continue;
-#endif /* CONFIG_PMAC_MEDIABAY */
- start_request(&floppy_states[i]);
+ start_request(fs);
}
}
if ((cmd & 0x80) && !capable(CAP_SYS_ADMIN))
return -EPERM;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
switch (cmd) {
case FDEJECT:
int n, err = 0;
if (fs->ref_count == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
out_8(&sw->setup, S_IBM_DRIVE | S_FCLK_DIV2);
out_8(&sw->control_bic, 0xff);
out_8(&sw->mode, 0x95);
struct swim3 __iomem *sw;
int ret, n;
-#ifdef CONFIG_PMAC_MEDIABAY
- if (fs->media_bay && check_media_bay(fs->media_bay, MB_FD))
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD)
return -ENXIO;
-#endif
sw = fs->swim3;
grab_drive(fs, revalidating, 0);
static int swim3_add_device(struct macio_dev *mdev, int index)
{
struct device_node *swim = mdev->ofdev.node;
- struct device_node *mediabay;
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
}
dev_set_drvdata(&mdev->ofdev.dev, fs);
- mediabay = (strcasecmp(swim->parent->type, "media-bay") == 0) ?
- swim->parent : NULL;
- if (mediabay == NULL)
+ if (mdev->media_bay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
memset(fs, 0, sizeof(*fs));
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
- fs->media_bay = mediabay;
+ fs->mdev = mdev;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
init_timer(&fs->timeout);
printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
- mediabay ? "in media bay" : "");
+ mdev->media_bay ? "in media bay" : "");
return 0;
return 0;
cancel_work_sync(&data->work);
+ cancel_work_sync(&data->waker);
clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
btusb_stop_traffic(data);
err = usb_autopm_get_interface(data->intf);
if (err < 0)
- return 0;
+ goto failed;
data->intf->needs_remote_wakeup = 0;
usb_autopm_put_interface(data->intf);
+failed:
+ usb_scuttle_anchored_urbs(&data->deferred);
return 0;
}
intel_i9xx_setup_flush();
-#ifdef USE_PCI_DMA_API
- if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
- dev_err(&intel_private.pcidev->dev,
- "set gfx device dma mask 36bit failed!\n");
-#endif
-
return 0;
}
&bridge->mode);
}
+ if (bridge->driver->mask_memory == intel_i965_mask_memory)
+ if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36)))
+ dev_err(&intel_private.pcidev->dev,
+ "set gfx device dma mask 36bit failed!\n");
+
pci_set_drvdata(pdev, bridge);
return agp_add_bridge(bridge);
}
return 0;
}
-static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start,
- int type)
+static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
{
- int i, j, num_entries;
+ int i, num_entries;
void *temp;
+ u32 *gp;
int mask_type;
- temp = agp_bridge->current_size;
- num_entries = A_SIZE_32(temp)->num_entries;
-
if (type != mem->type)
return -EINVAL;
return -EINVAL;
}
- if ((pg_start + mem->page_count) > num_entries)
- return -EINVAL;
-
- j = pg_start;
-
- while (j < (pg_start + mem->page_count)) {
- if (agp_bridge->gatt_table[j])
- return -EBUSY;
- j++;
- }
-
- for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
- agp_bridge->gatt_table[j] =
- cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) | 0x1UL);
- flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])),
- (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
- }
- (void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]);
- mb();
-
- uninorth_tlbflush(mem);
- return 0;
-}
-
-static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
-{
- int i, num_entries;
- void *temp;
- u32 *gp;
- int mask_type;
+ if (mem->page_count == 0)
+ return 0;
temp = agp_bridge->current_size;
num_entries = A_SIZE_32(temp)->num_entries;
- if (type != mem->type)
- return -EINVAL;
-
- mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type);
- if (mask_type != 0) {
- /* We know nothing of memory types */
- return -EINVAL;
- }
-
if ((pg_start + mem->page_count) > num_entries)
return -EINVAL;
for (i = 0; i < mem->page_count; ++i) {
if (gp[i]) {
dev_info(&agp_bridge->dev->dev,
- "u3_insert_memory: entry 0x%x occupied (%x)\n",
+ "uninorth_insert_memory: entry 0x%x occupied (%x)\n",
i, gp[i]);
return -EBUSY;
}
}
for (i = 0; i < mem->page_count; i++) {
- gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL;
+ if (is_u3)
+ gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL;
+ else
+ gp[i] = cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) |
+ 0x1UL);
flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])),
(unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000);
}
return 0;
}
-int u3_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
+int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type)
{
size_t i;
u32 *gp;
+ int mask_type;
+
+ if (type != mem->type)
+ return -EINVAL;
- if (type != 0 || mem->type != 0)
+ mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type);
+ if (mask_type != 0) {
/* We know nothing of memory types */
return -EINVAL;
+ }
+
+ if (mem->page_count == 0)
+ return 0;
gp = (u32 *) &agp_bridge->gatt_table[pg_start];
for (i = 0; i < mem->page_count; ++i)
.create_gatt_table = uninorth_create_gatt_table,
.free_gatt_table = uninorth_free_gatt_table,
.insert_memory = uninorth_insert_memory,
- .remove_memory = agp_generic_remove_memory,
+ .remove_memory = uninorth_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_enable = uninorth_agp_enable,
.create_gatt_table = uninorth_create_gatt_table,
.free_gatt_table = uninorth_free_gatt_table,
- .insert_memory = u3_insert_memory,
- .remove_memory = u3_remove_memory,
+ .insert_memory = uninorth_insert_memory,
+ .remove_memory = uninorth_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
tty_hangup(tty);
return 0;
}
+EXPORT_SYMBOL_GPL(hvc_remove);
/* Driver initialization: called as soon as someone uses hvc_alloc(). */
static int hvc_init(void)
notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
}
-static int write_console(uint32_t vtermno, const char *data, int len)
+static int __write_console(const char *data, int len)
{
struct xencons_interface *intf = xencons_interface();
XENCONS_RING_IDX cons, prod;
return sent;
}
+static int write_console(uint32_t vtermno, const char *data, int len)
+{
+ int ret = len;
+
+ /*
+ * Make sure the whole buffer is emitted, polling if
+ * necessary. We don't ever want to rely on the hvc daemon
+ * because the most interesting console output is when the
+ * kernel is crippled.
+ */
+ while (len) {
+ int sent = __write_console(data, len);
+
+ data += sent;
+ len -= sent;
+
+ if (unlikely(len))
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
+ }
+
+ return ret;
+}
+
static int read_console(uint32_t vtermno, char *buf, int len)
{
struct xencons_interface *intf = xencons_interface();
the port has just hung up or is in another error state */
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
+ /* Indicate we are open */
+ if (tty->termios->c_cflag & CBAUD)
+ tty_port_raise_dtr_rts(port);
port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
ve->event.event = event;
/* kernel view is consoles 0..n-1, user space view is
console 1..n with 0 meaning current, so we must bias */
- ve->event.old = old + 1;
- ve->event.new = new + 1;
+ ve->event.oldev = old + 1;
+ ve->event.newev = new + 1;
wake = 1;
ve->done = 1;
}
vt_event_wait(&vw);
if (vw.done == 0)
return -EINTR;
- } while (vw.event.new != n);
+ } while (vw.event.newev != n);
return 0;
}
static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data);
#ifdef CONFIG_HOTPLUG_CPU
/* This one keeps track of the previously set governor of a removed CPU */
-static DEFINE_PER_CPU(struct cpufreq_governor *, cpufreq_cpu_governor);
+static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor);
#endif
static DEFINE_SPINLOCK(cpufreq_driver_lock);
#ifdef CONFIG_SMP
unsigned long flags;
unsigned int j;
-
#ifdef CONFIG_HOTPLUG_CPU
- if (per_cpu(cpufreq_cpu_governor, cpu)) {
- policy->governor = per_cpu(cpufreq_cpu_governor, cpu);
+ struct cpufreq_governor *gov;
+
+ gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu));
+ if (gov) {
+ policy->governor = gov;
dprintk("Restoring governor %s for cpu %d\n",
policy->governor->name, cpu);
}
static int cpufreq_add_dev(struct sys_device *sys_dev)
{
unsigned int cpu = sys_dev->id;
- int ret = 0;
+ int ret = 0, found = 0;
struct cpufreq_policy *policy;
unsigned long flags;
unsigned int j;
+#ifdef CONFIG_HOTPLUG_CPU
+ int sibling;
+#endif
if (cpu_is_offline(cpu))
return 0;
INIT_WORK(&policy->update, handle_update);
/* Set governor before ->init, so that driver could check it */
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+#ifdef CONFIG_HOTPLUG_CPU
+ for_each_online_cpu(sibling) {
+ struct cpufreq_policy *cp = per_cpu(cpufreq_cpu_data, sibling);
+ if (cp && cp->governor &&
+ (cpumask_test_cpu(cpu, cp->related_cpus))) {
+ policy->governor = cp->governor;
+ found = 1;
+ break;
+ }
+ }
+#endif
+ if (!found)
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
/* call driver. From then on the cpufreq must be able
* to accept all calls to ->verify and ->setpolicy for this CPU
*/
#ifdef CONFIG_SMP
#ifdef CONFIG_HOTPLUG_CPU
- per_cpu(cpufreq_cpu_governor, cpu) = data->governor;
+ strncpy(per_cpu(cpufreq_cpu_governor, cpu), data->governor->name,
+ CPUFREQ_NAME_LEN);
#endif
/* if we have other CPUs still registered, we need to unlink them,
continue;
dprintk("removing link for cpu %u\n", j);
#ifdef CONFIG_HOTPLUG_CPU
- per_cpu(cpufreq_cpu_governor, j) = data->governor;
+ strncpy(per_cpu(cpufreq_cpu_governor, j),
+ data->governor->name, CPUFREQ_NAME_LEN);
#endif
cpu_sys_dev = get_cpu_sysdev(j);
sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq");
void cpufreq_unregister_governor(struct cpufreq_governor *governor)
{
+#ifdef CONFIG_HOTPLUG_CPU
+ int cpu;
+#endif
+
if (!governor)
return;
+#ifdef CONFIG_HOTPLUG_CPU
+ for_each_present_cpu(cpu) {
+ if (cpu_online(cpu))
+ continue;
+ if (!strcmp(per_cpu(cpufreq_cpu_governor, cpu), governor->name))
+ strcpy(per_cpu(cpufreq_cpu_governor, cpu), "\0");
+ }
+#endif
+
mutex_lock(&cpufreq_governor_mutex);
list_del(&governor->governor_list);
mutex_unlock(&cpufreq_governor_mutex);
idle_time = cputime64_sub(cur_wall_time, busy_time);
if (wall)
- *wall = cur_wall_time;
+ *wall = (cputime64_t)jiffies_to_usecs(cur_wall_time);
- return idle_time;
+ return (cputime64_t)jiffies_to_usecs(idle_time);;
}
static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
idle_time = cputime64_sub(cur_wall_time, busy_time);
if (wall)
- *wall = cur_wall_time;
+ *wall = (cputime64_t)jiffies_to_usecs(cur_wall_time);
- return idle_time;
+ return (cputime64_t)jiffies_to_usecs(idle_time);
}
static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall)
{
u32 ec = ERROR_CODE(info->nbsl);
u32 xec = EXT_ERROR_CODE(info->nbsl);
- int ecc_type = info->nbsh & (0x3 << 13);
+ int ecc_type = (info->nbsh >> 13) & 0x3;
/* Bail early out if this was an 'observed' error */
if (PP(ec) == K8_NBSL_PP_OBS)
opstate_init();
if (cache_k8_northbridges() < 0)
- goto err_exit;
+ return err;
err = pci_register_driver(&amd64_pci_driver);
if (err)
err_2nd_stage:
debugf0("2nd stage failed\n");
-
-err_exit:
pci_unregister_driver(&amd64_pci_driver);
return err;
dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0),
desc, ioname ? ioname : "gpio%d", gpio);
- if (dev) {
+ if (!IS_ERR(dev)) {
if (direction_may_change)
status = sysfs_create_group(&dev->kobj,
&gpio_attr_group);
if (status != 0)
device_unregister(dev);
} else
- status = -ENODEV;
+ status = PTR_ERR(dev);
if (status == 0)
set_bit(FLAG_EXPORT, &desc->flags);
}
mutex_lock(&sysfs_lock);
dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip,
"gpiochip%d", chip->base);
- if (dev) {
+ if (!IS_ERR(dev)) {
status = sysfs_create_group(&dev->kobj,
&gpiochip_attr_group);
} else
- status = -ENODEV;
+ status = PTR_ERR(dev);
chip->exported = (status == 0);
mutex_unlock(&sysfs_lock);
cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
cmdline_mode->rb, cmdline_mode->interlace,
cmdline_mode->margins);
+ drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
list_add(&mode->head, &connector->modes);
return mode;
}
if (crtc->fb == fb_helper->crtc_info[i].mode_set.fb) {
mutex_lock(&dev->mode_config.mutex);
- ret = crtc->funcs->set_config(&fb_helper->crtc_info->mode_set);
+ ret = crtc->funcs->set_config(&fb_helper->crtc_info[i].mode_set);
mutex_unlock(&dev->mode_config.mutex);
if (ret)
return ret;
goto out;
/* Try to set up FBC with a reasonable compressed buffer size */
- if (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev) || IS_GM45(dev)) &&
- i915_powersave) {
+ if (I915_HAS_FBC(dev) && i915_powersave) {
int cfb_size;
/* Try to get an 8M buffer... */
u32 saveVBLANK_A;
u32 saveVSYNC_A;
u32 saveBCLRPAT_A;
+ u32 saveTRANS_HTOTAL_A;
+ u32 saveTRANS_HBLANK_A;
+ u32 saveTRANS_HSYNC_A;
+ u32 saveTRANS_VTOTAL_A;
+ u32 saveTRANS_VBLANK_A;
+ u32 saveTRANS_VSYNC_A;
u32 savePIPEASTAT;
u32 saveDSPASTRIDE;
u32 saveDSPASIZE;
u32 saveDSPASURF;
u32 saveDSPATILEOFF;
u32 savePFIT_PGM_RATIOS;
+ u32 saveBLC_HIST_CTL;
u32 saveBLC_PWM_CTL;
u32 saveBLC_PWM_CTL2;
+ u32 saveBLC_CPU_PWM_CTL;
+ u32 saveBLC_CPU_PWM_CTL2;
u32 saveFPB0;
u32 saveFPB1;
u32 saveDPLL_B;
u32 saveVBLANK_B;
u32 saveVSYNC_B;
u32 saveBCLRPAT_B;
+ u32 saveTRANS_HTOTAL_B;
+ u32 saveTRANS_HBLANK_B;
+ u32 saveTRANS_HSYNC_B;
+ u32 saveTRANS_VTOTAL_B;
+ u32 saveTRANS_VBLANK_B;
+ u32 saveTRANS_VSYNC_B;
u32 savePIPEBSTAT;
u32 saveDSPBSTRIDE;
u32 saveDSPBSIZE;
u32 savePFIT_CONTROL;
u32 save_palette_a[256];
u32 save_palette_b[256];
+ u32 saveDPFC_CB_BASE;
u32 saveFBC_CFB_BASE;
u32 saveFBC_LL_BASE;
u32 saveFBC_CONTROL;
u32 saveIER;
u32 saveIIR;
u32 saveIMR;
+ u32 saveDEIER;
+ u32 saveDEIMR;
+ u32 saveGTIER;
+ u32 saveGTIMR;
+ u32 saveFDI_RXA_IMR;
+ u32 saveFDI_RXB_IMR;
u32 saveCACHE_MODE_0;
u32 saveD_STATE;
u32 saveDSPCLK_GATE_D;
u32 savePIPEB_DP_LINK_M;
u32 savePIPEA_DP_LINK_N;
u32 savePIPEB_DP_LINK_N;
+ u32 saveFDI_RXA_CTL;
+ u32 saveFDI_TXA_CTL;
+ u32 saveFDI_RXB_CTL;
+ u32 saveFDI_TXB_CTL;
+ u32 savePFA_CTL_1;
+ u32 savePFB_CTL_1;
+ u32 savePFA_WIN_SZ;
+ u32 savePFB_WIN_SZ;
+ u32 savePFA_WIN_POS;
+ u32 savePFB_WIN_POS;
struct {
struct drm_mm gtt_space;
struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
} mm;
struct sdvo_device_mapping sdvo_mappings[2];
+ /* indicate whether the LVDS_BORDER should be enabled or not */
+ unsigned int lvds_border_bits;
/* Reclocking support */
bool render_reclock_avail;
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev))
#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev))
-#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev)))
+#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
+ (IS_I9XX(dev) || IS_GM45(dev)) && \
+ !IS_IGD(dev) && \
+ !IS_IGDNG(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* Enable border for unscaled (or aspect-scaled) display */
+#define LVDS_BORDER_ENABLE (1 << 15)
/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+#define BLC_HIST_CTL 0x61260
+
/* TV port control */
#define TV_CTL 0x68000
/** Enables the TV encoder */
#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0)
+#define PIPE_BPC_MASK (7 << 5) /* Ironlake */
+#define PIPE_8BPC (0 << 5)
+#define PIPE_10BPC (1 << 5)
+#define PIPE_6BPC (2 << 5)
+#define PIPE_12BPC (3 << 5)
#define DSPARB 0x70030
#define DSPARB_CSTART_MASK (0x7f << 7)
#define DSPARB_AEND_SHIFT 0
#define DSPFW1 0x70034
+#define DSPFW_SR_SHIFT 23
+#define DSPFW_CURSORB_SHIFT 16
+#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
+#define DSPFW_CURSORA_MASK 0x00003f00
+#define DSPFW_CURSORA_SHIFT 16
#define DSPFW3 0x7003c
+#define DSPFW_HPLL_SR_EN (1<<31)
+#define DSPFW_CURSOR_SR_SHIFT 24
#define IGD_SELF_REFRESH_EN (1<<30)
/* FIFO watermark sizes etc */
+#define G4X_FIFO_LINE_SIZE 64
#define I915_FIFO_LINE_SIZE 64
#define I830_FIFO_LINE_SIZE 32
+
+#define G4X_FIFO_SIZE 127
#define I945_FIFO_SIZE 127 /* 945 & 965 */
#define I915_FIFO_SIZE 95
#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
+
+#define G4X_MAX_WM 0x3f
#define I915_MAX_WM 0x3f
#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PF_FILTER_MASK (3<<23)
+#define PF_FILTER_PROGRAMMED (0<<23)
+#define PF_FILTER_MED_3x3 (1<<23)
+#define PF_FILTER_EDGE_ENHANCE (2<<23)
+#define PF_FILTER_EDGE_SOFTEN (3<<23)
#define PFA_WIN_SZ 0x68074
#define PFB_WIN_SZ 0x68874
#define PFA_WIN_POS 0x68070
#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13)
#define DREF_SSC_SOURCE_DISABLE (0<<11)
#define DREF_SSC_SOURCE_ENABLE (2<<11)
-#define DREF_SSC_SOURCE_MASK (2<<11)
+#define DREF_SSC_SOURCE_MASK (3<<11)
#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9)
#define DREF_NONSPREAD_CK505_ENABLE (1<<9)
#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9)
-#define DREF_NONSPREAD_SOURCE_MASK (2<<9)
+#define DREF_NONSPREAD_SOURCE_MASK (3<<9)
#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7)
#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7)
#define DREF_SSC4_DOWNSPREAD (0<<6)
static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpll_reg;
- if (pipe == PIPE_A)
- return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE);
- else
- return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE);
+ if (IS_IGDNG(dev)) {
+ dpll_reg = (pipe == PIPE_A) ? PCH_DPLL_A: PCH_DPLL_B;
+ } else {
+ dpll_reg = (pipe == PIPE_A) ? DPLL_A: DPLL_B;
+ }
+
+ return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE);
}
static void i915_save_palette(struct drm_device *dev, enum pipe pipe)
if (!i915_pipe_enabled(dev, pipe))
return;
+ if (IS_IGDNG(dev))
+ reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B;
+
if (pipe == PIPE_A)
array = dev_priv->save_palette_a;
else
if (!i915_pipe_enabled(dev, pipe))
return;
+ if (IS_IGDNG(dev))
+ reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B;
+
if (pipe == PIPE_A)
array = dev_priv->save_palette_a;
else
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
- dev_priv->saveFPA0 = I915_READ(FPA0);
- dev_priv->saveFPA1 = I915_READ(FPA1);
- dev_priv->saveDPLL_A = I915_READ(DPLL_A);
- if (IS_I965G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFPA0 = I915_READ(PCH_FPA0);
+ dev_priv->saveFPA1 = I915_READ(PCH_FPA1);
+ dev_priv->saveDPLL_A = I915_READ(PCH_DPLL_A);
+ } else {
+ dev_priv->saveFPA0 = I915_READ(FPA0);
+ dev_priv->saveFPA1 = I915_READ(FPA1);
+ dev_priv->saveDPLL_A = I915_READ(DPLL_A);
+ }
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD);
dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A);
dev_priv->saveHBLANK_A = I915_READ(HBLANK_A);
dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A);
dev_priv->saveVBLANK_A = I915_READ(VBLANK_A);
dev_priv->saveVSYNC_A = I915_READ(VSYNC_A);
- dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL);
+ dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL);
+
+ dev_priv->savePFA_CTL_1 = I915_READ(PFA_CTL_1);
+ dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ);
+ dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS);
+
+ dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A);
+ dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A);
+ dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A);
+ dev_priv->saveTRANS_VTOTAL_A = I915_READ(TRANS_VTOTAL_A);
+ dev_priv->saveTRANS_VBLANK_A = I915_READ(TRANS_VBLANK_A);
+ dev_priv->saveTRANS_VSYNC_A = I915_READ(TRANS_VSYNC_A);
+ }
dev_priv->saveDSPACNTR = I915_READ(DSPACNTR);
dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE);
/* Pipe & plane B info */
dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF);
dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC);
- dev_priv->saveFPB0 = I915_READ(FPB0);
- dev_priv->saveFPB1 = I915_READ(FPB1);
- dev_priv->saveDPLL_B = I915_READ(DPLL_B);
- if (IS_I965G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFPB0 = I915_READ(PCH_FPB0);
+ dev_priv->saveFPB1 = I915_READ(PCH_FPB1);
+ dev_priv->saveDPLL_B = I915_READ(PCH_DPLL_B);
+ } else {
+ dev_priv->saveFPB0 = I915_READ(FPB0);
+ dev_priv->saveFPB1 = I915_READ(FPB1);
+ dev_priv->saveDPLL_B = I915_READ(DPLL_B);
+ }
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD);
dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B);
dev_priv->saveHBLANK_B = I915_READ(HBLANK_B);
dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B);
dev_priv->saveVBLANK_B = I915_READ(VBLANK_B);
dev_priv->saveVSYNC_B = I915_READ(VSYNC_B);
- dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL);
+ dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL);
+
+ dev_priv->savePFB_CTL_1 = I915_READ(PFB_CTL_1);
+ dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ);
+ dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS);
+
+ dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B);
+ dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B);
+ dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B);
+ dev_priv->saveTRANS_VTOTAL_B = I915_READ(TRANS_VTOTAL_B);
+ dev_priv->saveTRANS_VBLANK_B = I915_READ(TRANS_VBLANK_B);
+ dev_priv->saveTRANS_VSYNC_B = I915_READ(TRANS_VSYNC_B);
+ }
dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR);
dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE);
static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int dpll_a_reg, fpa0_reg, fpa1_reg;
+ int dpll_b_reg, fpb0_reg, fpb1_reg;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+ if (IS_IGDNG(dev)) {
+ dpll_a_reg = PCH_DPLL_A;
+ dpll_b_reg = PCH_DPLL_B;
+ fpa0_reg = PCH_FPA0;
+ fpb0_reg = PCH_FPB0;
+ fpa1_reg = PCH_FPA1;
+ fpb1_reg = PCH_FPB1;
+ } else {
+ dpll_a_reg = DPLL_A;
+ dpll_b_reg = DPLL_B;
+ fpa0_reg = FPA0;
+ fpb0_reg = FPB0;
+ fpa1_reg = FPA1;
+ fpb1_reg = FPB1;
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
- I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+ I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
- I915_WRITE(FPA0, dev_priv->saveFPA0);
- I915_WRITE(FPA1, dev_priv->saveFPA1);
+ I915_WRITE(fpa0_reg, dev_priv->saveFPA0);
+ I915_WRITE(fpa1_reg, dev_priv->saveFPA1);
/* Actually enable it */
- I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+ I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A);
DRM_UDELAY(150);
- if (IS_I965G(dev))
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
DRM_UDELAY(150);
I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
- I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL);
+ I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL);
+
+ I915_WRITE(PFA_CTL_1, dev_priv->savePFA_CTL_1);
+ I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ);
+ I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS);
+
+ I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A);
+ I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A);
+ I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A);
+ I915_WRITE(TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A);
+ I915_WRITE(TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A);
+ I915_WRITE(TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A);
+ }
/* Restore plane info */
I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
/* Pipe & plane B info */
if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
- I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
- I915_WRITE(FPB0, dev_priv->saveFPB0);
- I915_WRITE(FPB1, dev_priv->saveFPB1);
+ I915_WRITE(fpb0_reg, dev_priv->saveFPB0);
+ I915_WRITE(fpb1_reg, dev_priv->saveFPB1);
/* Actually enable it */
- I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
- I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+ if (!IS_IGDNG(dev))
+ I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL);
+ I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL);
+
+ I915_WRITE(PFB_CTL_1, dev_priv->savePFB_CTL_1);
+ I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ);
+ I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS);
+
+ I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B);
+ I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B);
+ I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B);
+ I915_WRITE(TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B);
+ I915_WRITE(TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B);
+ I915_WRITE(TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B);
+ }
/* Restore plane info */
I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
dev_priv->saveCURSIZE = I915_READ(CURSIZE);
/* CRT state */
- dev_priv->saveADPA = I915_READ(ADPA);
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveADPA = I915_READ(PCH_ADPA);
+ } else {
+ dev_priv->saveADPA = I915_READ(ADPA);
+ }
/* LVDS state */
- dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
- if (IS_I965G(dev))
- dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
- dev_priv->saveLVDS = I915_READ(LVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
+ dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
+ dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
+ dev_priv->saveLVDS = I915_READ(PCH_LVDS);
+ } else {
+ dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
+ if (IS_I965G(dev))
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ dev_priv->saveLVDS = I915_READ(LVDS);
+ }
+
+ if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev))
dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
- dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
- dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
- dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
+ } else {
+ dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+ }
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
/* FIXME: save TV & SDVO state */
/* FBC state */
- dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
- dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
- dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
- dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+ if (IS_GM45(dev)) {
+ dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE);
+ } else {
+ dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+ dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+ dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+ dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+ }
/* VGA state */
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
- dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+ if (IS_IGDNG(dev))
+ dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL);
+ else
+ dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
i915_save_vga(dev);
}
I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
/* CRT state */
- I915_WRITE(ADPA, dev_priv->saveADPA);
+ if (IS_IGDNG(dev))
+ I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
+ else
+ I915_WRITE(ADPA, dev_priv->saveADPA);
/* LVDS state */
- if (IS_I965G(dev))
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(PCH_LVDS, dev_priv->saveLVDS);
+ } else if (IS_MOBILE(dev) && !IS_I830(dev))
I915_WRITE(LVDS, dev_priv->saveLVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
+
+ if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev))
I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
- I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
- I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
- I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
- I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
- I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
- I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+ I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+ I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
+ I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
+ I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL);
+ I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+ I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+ I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
+ I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ }
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
/* FIXME: restore TV & SDVO state */
/* FBC info */
- I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
- I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
- I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
- I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+ if (IS_GM45(dev)) {
+ g4x_disable_fbc(dev);
+ I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
+ } else {
+ i8xx_disable_fbc(dev);
+ I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
+ I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
+ I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
+ I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+ }
/* VGA state */
- I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+ if (IS_IGDNG(dev))
+ I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
+ else
+ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
I915_WRITE(VGA0, dev_priv->saveVGA0);
I915_WRITE(VGA1, dev_priv->saveVGA1);
I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
i915_save_display(dev);
/* Interrupt state */
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveDEIER = I915_READ(DEIER);
+ dev_priv->saveDEIMR = I915_READ(DEIMR);
+ dev_priv->saveGTIER = I915_READ(GTIER);
+ dev_priv->saveGTIMR = I915_READ(GTIMR);
+ dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR);
+ dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR);
+ } else {
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+ }
/* Clock gating state */
dev_priv->saveD_STATE = I915_READ(D_STATE);
i915_restore_display(dev);
/* Interrupt state */
- I915_WRITE (IER, dev_priv->saveIER);
- I915_WRITE (IMR, dev_priv->saveIMR);
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(DEIER, dev_priv->saveDEIER);
+ I915_WRITE(DEIMR, dev_priv->saveDEIMR);
+ I915_WRITE(GTIER, dev_priv->saveGTIER);
+ I915_WRITE(GTIMR, dev_priv->saveGTIMR);
+ I915_WRITE(FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
+ I915_WRITE(FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+ } else {
+ I915_WRITE (IER, dev_priv->saveIER);
+ I915_WRITE (IMR, dev_priv->saveIMR);
+ }
/* Clock gating state */
I915_WRITE (D_STATE, dev_priv->saveD_STATE);
struct drm_device *dev = dev_priv->dev;
struct bdb_driver_features *driver;
- /* set default for chips without eDP */
- if (!SUPPORTS_EDP(dev)) {
- dev_priv->edp_support = 0;
- return;
- }
-
driver = find_section(bdb, BDB_DRIVER_FEATURES);
if (!driver)
return;
- if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+ if (driver && SUPPORTS_EDP(dev) &&
+ driver->lvds_config == BDB_DRIVER_FEATURE_EDP) {
dev_priv->edp_support = 1;
+ } else {
+ dev_priv->edp_support = 0;
+ }
- if (driver->dual_frequency)
+ if (driver && driver->dual_frequency)
dev_priv->render_reclock_avail = true;
}
clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
clock.p = (clock.p1 * clock.p2);
clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+ clock.vco = 0;
memcpy(best_clock, &clock, sizeof(intel_clock_t));
return true;
}
return ret;
}
- /* Pre-i965 needs to install a fence for tiled scan-out */
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ /* Install a fence for tiled scan-out. Pre-i965 always needs a fence,
+ * whereas 965+ only requires a fence if using framebuffer compression.
+ * For simplicity, we always install a fence as the cost is not that onerous.
+ */
+ if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
/* Enable panel fitting for LVDS */
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
temp = I915_READ(pf_ctl_reg);
- I915_WRITE(pf_ctl_reg, temp | PF_ENABLE);
+ I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
/* currently full aspect */
I915_WRITE(pf_win_pos, 0);
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
+ intel_update_watermarks(dev);
+
/* Enable the DPLL */
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) == 0) {
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
- intel_update_watermarks(dev);
break;
case DRM_MODE_DPMS_OFF:
intel_update_watermarks(dev);
#define LINK_N 0x80000
static void
-igdng_compute_m_n(int bytes_per_pixel, int nlanes,
+igdng_compute_m_n(int bits_per_pixel, int nlanes,
int pixel_clock, int link_clock,
struct fdi_m_n *m_n)
{
temp = (u64) DATA_N * pixel_clock;
temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
+ m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
+ m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
m_n->gmch_n = DATA_N;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
IGD_CURSOR_GUARD_WM,
IGD_FIFO_LINE_SIZE
};
+static struct intel_watermark_params g4x_wm_info = {
+ G4X_FIFO_SIZE,
+ G4X_MAX_WM,
+ G4X_MAX_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
static struct intel_watermark_params i945_wm_info = {
I945_FIFO_SIZE,
I915_MAX_WM,
return size;
}
-static void g4x_update_wm(struct drm_device *dev, int unused, int unused2,
- int unused3, int unused4)
+static void g4x_update_wm(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 fw_blc_self = I915_READ(FW_BLC_SELF);
+ int total_size, cacheline_size;
+ int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr;
+ struct intel_watermark_params planea_params, planeb_params;
+ unsigned long line_time_us;
+ int sr_clock, sr_entries = 0, entries_required;
- if (i915_powersave)
- fw_blc_self |= FW_BLC_SELF_EN;
- else
- fw_blc_self &= ~FW_BLC_SELF_EN;
- I915_WRITE(FW_BLC_SELF, fw_blc_self);
+ /* Create copies of the base settings for each pipe */
+ planea_params = planeb_params = g4x_wm_info;
+
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
+
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planea_wm = entries_required + planea_params.guard_size;
+
+ entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planeb_wm = entries_required + planeb_params.guard_size;
+
+ cursora_wm = cursorb_wm = 16;
+ cursor_sr = 32;
+
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 12000;
+
+ sr_clock = planea_clock ? planea_clock : planeb_clock;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ }
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
+ planea_wm, planeb_wm, sr_entries);
+
+ planea_wm &= 0x3f;
+ planeb_wm &= 0x3f;
+
+ I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) |
+ (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+ (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm);
+ I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+ (cursora_wm << DSPFW_CURSORA_SHIFT));
+ /* HPLL off in SR has some issues on G4x... disable it */
+ I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
+ (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
}
static void i965_update_wm(struct drm_device *dev, int unused, int unused2,
unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
int enabled = 0, pixel_size = 0;
+ if (!dev_priv->display.update_wm)
+ return;
+
/* Get the clock config from both planes */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
intel_crtc = to_intel_crtc(crtc);
/* FDI link */
if (IS_IGDNG(dev)) {
- int lane, link_bw;
+ int lane, link_bw, bpp;
/* eDP doesn't require FDI link, so just set DP M/N
according to current link config */
if (is_edp) {
lane = 4;
link_bw = 270000;
}
- igdng_compute_m_n(3, lane, target_clock,
+
+ /* determine panel color depth */
+ temp = I915_READ(pipeconf_reg);
+
+ switch (temp & PIPE_BPC_MASK) {
+ case PIPE_8BPC:
+ bpp = 24;
+ break;
+ case PIPE_10BPC:
+ bpp = 30;
+ break;
+ case PIPE_6BPC:
+ bpp = 18;
+ break;
+ case PIPE_12BPC:
+ bpp = 36;
+ break;
+ default:
+ DRM_ERROR("unknown pipe bpc value\n");
+ bpp = 24;
+ }
+
+ igdng_compute_m_n(bpp, lane, target_clock,
link_bw, &m_n);
}
+ /* Ironlake: try to setup display ref clock before DPLL
+ * enabling. This is only under driver's control after
+ * PCH B stepping, previous chipset stepping should be
+ * ignoring this setting.
+ */
+ if (IS_IGDNG(dev)) {
+ temp = I915_READ(PCH_DREF_CONTROL);
+ /* Always enable nonspread source */
+ temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ udelay(200);
+
+ if (is_edp) {
+ if (dev_priv->lvds_use_ssc) {
+ temp |= DREF_SSC1_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ udelay(200);
+
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ } else {
+ temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ }
+ }
+ }
+
if (IS_IGD(dev)) {
fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
lvds = I915_READ(lvds_reg);
lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+ /* set the corresponsding LVDS_BORDER bit */
+ lvds |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
* set the DPLLs for dual-channel mode or not.
*/
* Disable clock gating reported to work incorrectly according to the
* specs, but enable as much else as we can.
*/
- if (IS_G4X(dev)) {
+ if (IS_IGDNG(dev)) {
+ return;
+ } else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
i830_get_display_clock_speed;
/* For FIFO watermark updates */
- if (IS_G4X(dev))
+ if (IS_IGDNG(dev))
+ dev_priv->display.update_wm = NULL;
+ else if (IS_G4X(dev))
dev_priv->display.update_wm = g4x_update_wm;
else if (IS_I965G(dev))
dev_priv->display.update_wm = i965_update_wm;
{
struct intel_dp_priv *dp_priv = intel_output->dev_priv;
- DRM_ERROR("i2c_init %s\n", name);
+ DRM_DEBUG_KMS("i2c_init %s\n", name);
dp_priv->algo.running = false;
dp_priv->algo.address = 0;
dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
adjusted_mode->crtc_vblank_start + vsync_pos;
/* keep the vsync width constant */
adjusted_mode->crtc_vsync_end =
- adjusted_mode->crtc_vblank_start + vsync_width;
+ adjusted_mode->crtc_vsync_start + vsync_width;
border = 1;
break;
case DRM_MODE_SCALE_ASPECT:
out:
lvds_priv->pfit_control = pfit_control;
lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
+ /*
+ * When there exists the border, it means that the LVDS_BORDR
+ * should be enabled.
+ */
+ if (border)
+ dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
+ else
+ dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \
r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \
- r600_blit_kms.o
+ r600_blit_kms.o radeon_pm.o
radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
UCHAR ucSS_Step;
UCHAR ucSS_Delay;
UCHAR ucSS_Id;
- UCHAR ucRecommandedRef_Div;
+ UCHAR ucRecommendedRef_Div;
UCHAR ucSS_Range; /* it was reserved for V11 */
} ATOM_SPREAD_SPECTRUM_ASSIGNMENT;
#include "atom.h"
#include "atom-bits.h"
-/* evil but including atombios.h is much worse */
-bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
- SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing,
- int32_t *pixel_clock);
static void atombios_overscan_setup(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
switch (mode) {
case DRM_MODE_DPMS_ON:
+ atombios_enable_crtc(crtc, 1);
if (ASIC_IS_DCE3(rdev))
atombios_enable_crtc_memreq(crtc, 1);
- atombios_enable_crtc(crtc, 1);
atombios_blank_crtc(crtc, 0);
break;
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
case DRM_MODE_DPMS_OFF:
atombios_blank_crtc(crtc, 1);
- atombios_enable_crtc(crtc, 0);
if (ASIC_IS_DCE3(rdev))
atombios_enable_crtc_memreq(crtc, 0);
+ atombios_enable_crtc(crtc, 0);
break;
}
static void
atombios_set_crtc_dtd_timing(struct drm_crtc *crtc,
- SET_CRTC_USING_DTD_TIMING_PARAMETERS * crtc_param)
+ struct drm_display_mode *mode)
{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
- SET_CRTC_USING_DTD_TIMING_PARAMETERS conv_param;
+ SET_CRTC_USING_DTD_TIMING_PARAMETERS args;
int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_UsingDTDTiming);
+ u16 misc = 0;
- conv_param.usH_Size = cpu_to_le16(crtc_param->usH_Size);
- conv_param.usH_Blanking_Time =
- cpu_to_le16(crtc_param->usH_Blanking_Time);
- conv_param.usV_Size = cpu_to_le16(crtc_param->usV_Size);
- conv_param.usV_Blanking_Time =
- cpu_to_le16(crtc_param->usV_Blanking_Time);
- conv_param.usH_SyncOffset = cpu_to_le16(crtc_param->usH_SyncOffset);
- conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth);
- conv_param.usV_SyncOffset = cpu_to_le16(crtc_param->usV_SyncOffset);
- conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth);
- conv_param.susModeMiscInfo.usAccess =
- cpu_to_le16(crtc_param->susModeMiscInfo.usAccess);
- conv_param.ucCRTC = crtc_param->ucCRTC;
+ memset(&args, 0, sizeof(args));
+ args.usH_Size = cpu_to_le16(mode->crtc_hdisplay);
+ args.usH_Blanking_Time =
+ cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay);
+ args.usV_Size = cpu_to_le16(mode->crtc_vdisplay);
+ args.usV_Blanking_Time =
+ cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay);
+ args.usH_SyncOffset =
+ cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay);
+ args.usH_SyncWidth =
+ cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start);
+ args.usV_SyncOffset =
+ cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay);
+ args.usV_SyncWidth =
+ cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start);
+ /*args.ucH_Border = mode->hborder;*/
+ /*args.ucV_Border = mode->vborder;*/
+
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ misc |= ATOM_VSYNC_POLARITY;
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ misc |= ATOM_HSYNC_POLARITY;
+ if (mode->flags & DRM_MODE_FLAG_CSYNC)
+ misc |= ATOM_COMPOSITESYNC;
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ misc |= ATOM_INTERLACE;
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ misc |= ATOM_DOUBLE_CLOCK_MODE;
+
+ args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
+ args.ucCRTC = radeon_crtc->crtc_id;
printk("executing set crtc dtd timing\n");
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param);
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
-void atombios_crtc_set_timing(struct drm_crtc *crtc,
- SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *
- crtc_param)
+static void atombios_crtc_set_timing(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
- SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION conv_param;
+ SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION args;
int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_Timing);
+ u16 misc = 0;
- conv_param.usH_Total = cpu_to_le16(crtc_param->usH_Total);
- conv_param.usH_Disp = cpu_to_le16(crtc_param->usH_Disp);
- conv_param.usH_SyncStart = cpu_to_le16(crtc_param->usH_SyncStart);
- conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth);
- conv_param.usV_Total = cpu_to_le16(crtc_param->usV_Total);
- conv_param.usV_Disp = cpu_to_le16(crtc_param->usV_Disp);
- conv_param.usV_SyncStart = cpu_to_le16(crtc_param->usV_SyncStart);
- conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth);
- conv_param.susModeMiscInfo.usAccess =
- cpu_to_le16(crtc_param->susModeMiscInfo.usAccess);
- conv_param.ucCRTC = crtc_param->ucCRTC;
- conv_param.ucOverscanRight = crtc_param->ucOverscanRight;
- conv_param.ucOverscanLeft = crtc_param->ucOverscanLeft;
- conv_param.ucOverscanBottom = crtc_param->ucOverscanBottom;
- conv_param.ucOverscanTop = crtc_param->ucOverscanTop;
- conv_param.ucReserved = crtc_param->ucReserved;
+ memset(&args, 0, sizeof(args));
+ args.usH_Total = cpu_to_le16(mode->crtc_htotal);
+ args.usH_Disp = cpu_to_le16(mode->crtc_hdisplay);
+ args.usH_SyncStart = cpu_to_le16(mode->crtc_hsync_start);
+ args.usH_SyncWidth =
+ cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start);
+ args.usV_Total = cpu_to_le16(mode->crtc_vtotal);
+ args.usV_Disp = cpu_to_le16(mode->crtc_vdisplay);
+ args.usV_SyncStart = cpu_to_le16(mode->crtc_vsync_start);
+ args.usV_SyncWidth =
+ cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start);
+
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ misc |= ATOM_VSYNC_POLARITY;
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ misc |= ATOM_HSYNC_POLARITY;
+ if (mode->flags & DRM_MODE_FLAG_CSYNC)
+ misc |= ATOM_COMPOSITESYNC;
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ misc |= ATOM_INTERLACE;
+ if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+ misc |= ATOM_DOUBLE_CLOCK_MODE;
+
+ args.susModeMiscInfo.usAccess = cpu_to_le16(misc);
+ args.ucCRTC = radeon_crtc->crtc_id;
printk("executing set crtc timing\n");
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param);
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+static void atombios_set_ss(struct drm_crtc *crtc, int enable)
+{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+ struct drm_device *dev = crtc->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct drm_encoder *encoder = NULL;
+ struct radeon_encoder *radeon_encoder = NULL;
+ struct radeon_encoder_atom_dig *dig = NULL;
+ int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL);
+ ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION args;
+ ENABLE_LVDS_SS_PARAMETERS legacy_args;
+ uint16_t percentage = 0;
+ uint8_t type = 0, step = 0, delay = 0, range = 0;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->crtc == crtc) {
+ radeon_encoder = to_radeon_encoder(encoder);
+ /* only enable spread spectrum on LVDS */
+ if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+ dig = radeon_encoder->enc_priv;
+ if (dig && dig->ss) {
+ percentage = dig->ss->percentage;
+ type = dig->ss->type;
+ step = dig->ss->step;
+ delay = dig->ss->delay;
+ range = dig->ss->range;
+ } else if (enable)
+ return;
+ } else if (enable)
+ return;
+ break;
+ }
+ }
+
+ if (!radeon_encoder)
+ return;
+
+ if (ASIC_IS_AVIVO(rdev)) {
+ memset(&args, 0, sizeof(args));
+ args.usSpreadSpectrumPercentage = cpu_to_le16(percentage);
+ args.ucSpreadSpectrumType = type;
+ args.ucSpreadSpectrumStep = step;
+ args.ucSpreadSpectrumDelay = delay;
+ args.ucSpreadSpectrumRange = range;
+ args.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1;
+ args.ucEnable = enable;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ } else {
+ memset(&legacy_args, 0, sizeof(legacy_args));
+ legacy_args.usSpreadSpectrumPercentage = cpu_to_le16(percentage);
+ legacy_args.ucSpreadSpectrumType = type;
+ legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2;
+ legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4;
+ legacy_args.ucEnable = enable;
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&legacy_args);
+ }
}
void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
struct drm_encoder *encoder = NULL;
struct radeon_encoder *radeon_encoder = NULL;
uint8_t frev, crev;
- int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
+ int index;
SET_PIXEL_CLOCK_PS_ALLOCATION args;
PIXEL_CLOCK_PARAMETERS *spc1_ptr;
PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr;
PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr;
- uint32_t sclock = mode->clock;
+ uint32_t pll_clock = mode->clock;
+ uint32_t adjusted_clock;
uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0;
struct radeon_pll *pll;
int pll_flags = 0;
memset(&args, 0, sizeof(args));
if (ASIC_IS_AVIVO(rdev)) {
- uint32_t ss_cntl;
-
if ((rdev->family == CHIP_RS600) ||
(rdev->family == CHIP_RS690) ||
(rdev->family == CHIP_RS740))
pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
else
pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
-
- /* disable spread spectrum clocking for now -- thanks Hedy Lamarr */
- if (radeon_crtc->crtc_id == 0) {
- ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL);
- WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl & ~1);
- } else {
- ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL);
- WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl & ~1);
- }
} else {
pll_flags |= RADEON_PLL_LEGACY;
}
}
+ /* DCE3+ has an AdjustDisplayPll that will adjust the pixel clock
+ * accordingly based on the encoder/transmitter to work around
+ * special hw requirements.
+ */
+ if (ASIC_IS_DCE3(rdev)) {
+ ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args;
+
+ if (!encoder)
+ return;
+
+ memset(&adjust_pll_args, 0, sizeof(adjust_pll_args));
+ adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10);
+ adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id;
+ adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder);
+
+ index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll);
+ atom_execute_table(rdev->mode_info.atom_context,
+ index, (uint32_t *)&adjust_pll_args);
+ adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10;
+ } else {
+ /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
+ if (ASIC_IS_AVIVO(rdev) &&
+ (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1))
+ adjusted_clock = mode->clock * 2;
+ else
+ adjusted_clock = mode->clock;
+ }
+
if (radeon_crtc->crtc_id == 0)
pll = &rdev->clock.p1pll;
else
pll = &rdev->clock.p2pll;
- radeon_compute_pll(pll, mode->clock, &sclock, &fb_div, &frac_fb_div,
+ radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div,
&ref_div, &post_div, pll_flags);
+ index = GetIndexIntoMasterTable(COMMAND, SetPixelClock);
atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev,
&crev);
switch (crev) {
case 1:
spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput;
- spc1_ptr->usPixelClock = cpu_to_le16(sclock);
+ spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
spc1_ptr->usRefDiv = cpu_to_le16(ref_div);
spc1_ptr->usFbDiv = cpu_to_le16(fb_div);
spc1_ptr->ucFracFbDiv = frac_fb_div;
case 2:
spc2_ptr =
(PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput;
- spc2_ptr->usPixelClock = cpu_to_le16(sclock);
+ spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
spc2_ptr->usRefDiv = cpu_to_le16(ref_div);
spc2_ptr->usFbDiv = cpu_to_le16(fb_div);
spc2_ptr->ucFracFbDiv = frac_fb_div;
return;
spc3_ptr =
(PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput;
- spc3_ptr->usPixelClock = cpu_to_le16(sclock);
+ spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10);
spc3_ptr->usRefDiv = cpu_to_le16(ref_div);
spc3_ptr->usFbDiv = cpu_to_le16(fb_div);
spc3_ptr->ucFracFbDiv = frac_fb_div;
WREG32(AVIVO_D1VGA_CONTROL, 0);
else
WREG32(AVIVO_D2VGA_CONTROL, 0);
+
+ if (rdev->family >= CHIP_RV770) {
+ if (radeon_crtc->crtc_id) {
+ WREG32(R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0);
+ WREG32(R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0);
+ } else {
+ WREG32(R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0);
+ WREG32(R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0);
+ }
+ }
WREG32(AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset,
(u32) fb_location);
WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS +
radeon_fb = to_radeon_framebuffer(old_fb);
radeon_gem_object_unpin(radeon_fb->obj);
}
+
+ /* Bytes per pixel may have changed */
+ radeon_bandwidth_update(rdev);
+
return 0;
}
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct drm_device *dev = crtc->dev;
struct radeon_device *rdev = dev->dev_private;
- struct drm_encoder *encoder;
- SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION crtc_timing;
- int need_tv_timings = 0;
- bool ret;
/* TODO color tiling */
- memset(&crtc_timing, 0, sizeof(crtc_timing));
-
- list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- /* find tv std */
- if (encoder->crtc == crtc) {
- struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-
- if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) {
- struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv;
- if (tv_dac) {
- if (tv_dac->tv_std == TV_STD_NTSC ||
- tv_dac->tv_std == TV_STD_NTSC_J ||
- tv_dac->tv_std == TV_STD_PAL_M)
- need_tv_timings = 1;
- else
- need_tv_timings = 2;
- break;
- }
- }
- }
- }
-
- crtc_timing.ucCRTC = radeon_crtc->crtc_id;
- if (need_tv_timings) {
- ret = radeon_atom_get_tv_timings(rdev, need_tv_timings - 1,
- &crtc_timing, &adjusted_mode->clock);
- if (ret == false)
- need_tv_timings = 0;
- }
-
- if (!need_tv_timings) {
- crtc_timing.usH_Total = adjusted_mode->crtc_htotal;
- crtc_timing.usH_Disp = adjusted_mode->crtc_hdisplay;
- crtc_timing.usH_SyncStart = adjusted_mode->crtc_hsync_start;
- crtc_timing.usH_SyncWidth =
- adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start;
-
- crtc_timing.usV_Total = adjusted_mode->crtc_vtotal;
- crtc_timing.usV_Disp = adjusted_mode->crtc_vdisplay;
- crtc_timing.usV_SyncStart = adjusted_mode->crtc_vsync_start;
- crtc_timing.usV_SyncWidth =
- adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
- crtc_timing.susModeMiscInfo.usAccess |= ATOM_VSYNC_POLARITY;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
- crtc_timing.susModeMiscInfo.usAccess |= ATOM_HSYNC_POLARITY;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC)
- crtc_timing.susModeMiscInfo.usAccess |= ATOM_COMPOSITESYNC;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
- crtc_timing.susModeMiscInfo.usAccess |= ATOM_INTERLACE;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
- crtc_timing.susModeMiscInfo.usAccess |= ATOM_DOUBLE_CLOCK_MODE;
- }
+ atombios_set_ss(crtc, 0);
atombios_crtc_set_pll(crtc, adjusted_mode);
- atombios_crtc_set_timing(crtc, &crtc_timing);
+ atombios_set_ss(crtc, 1);
+ atombios_crtc_set_timing(crtc, adjusted_mode);
if (ASIC_IS_AVIVO(rdev))
atombios_crtc_set_base(crtc, x, y, old_fb);
else {
- if (radeon_crtc->crtc_id == 0) {
- SET_CRTC_USING_DTD_TIMING_PARAMETERS crtc_dtd_timing;
- memset(&crtc_dtd_timing, 0, sizeof(crtc_dtd_timing));
-
- /* setup FP shadow regs on R4xx */
- crtc_dtd_timing.ucCRTC = radeon_crtc->crtc_id;
- crtc_dtd_timing.usH_Size = adjusted_mode->crtc_hdisplay;
- crtc_dtd_timing.usV_Size = adjusted_mode->crtc_vdisplay;
- crtc_dtd_timing.usH_Blanking_Time =
- adjusted_mode->crtc_hblank_end -
- adjusted_mode->crtc_hdisplay;
- crtc_dtd_timing.usV_Blanking_Time =
- adjusted_mode->crtc_vblank_end -
- adjusted_mode->crtc_vdisplay;
- crtc_dtd_timing.usH_SyncOffset =
- adjusted_mode->crtc_hsync_start -
- adjusted_mode->crtc_hdisplay;
- crtc_dtd_timing.usV_SyncOffset =
- adjusted_mode->crtc_vsync_start -
- adjusted_mode->crtc_vdisplay;
- crtc_dtd_timing.usH_SyncWidth =
- adjusted_mode->crtc_hsync_end -
- adjusted_mode->crtc_hsync_start;
- crtc_dtd_timing.usV_SyncWidth =
- adjusted_mode->crtc_vsync_end -
- adjusted_mode->crtc_vsync_start;
- /* crtc_dtd_timing.ucH_Border = adjusted_mode->crtc_hborder; */
- /* crtc_dtd_timing.ucV_Border = adjusted_mode->crtc_vborder; */
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
- crtc_dtd_timing.susModeMiscInfo.usAccess |=
- ATOM_VSYNC_POLARITY;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
- crtc_dtd_timing.susModeMiscInfo.usAccess |=
- ATOM_HSYNC_POLARITY;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC)
- crtc_dtd_timing.susModeMiscInfo.usAccess |=
- ATOM_COMPOSITESYNC;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
- crtc_dtd_timing.susModeMiscInfo.usAccess |=
- ATOM_INTERLACE;
-
- if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
- crtc_dtd_timing.susModeMiscInfo.usAccess |=
- ATOM_DOUBLE_CLOCK_MODE;
-
- atombios_set_crtc_dtd_timing(crtc, &crtc_dtd_timing);
- }
+ if (radeon_crtc->crtc_id == 0)
+ atombios_set_crtc_dtd_timing(crtc, adjusted_mode);
radeon_crtc_set_base(crtc, x, y, old_fb);
radeon_legacy_atom_set_surface(crtc);
}
atombios_overscan_setup(crtc, mode, adjusted_mode);
atombios_scaler_setup(crtc);
- radeon_bandwidth_update(rdev);
return 0;
}
char *gpu_prefix;
};
-struct offset *offset_new(unsigned o)
+static struct offset *offset_new(unsigned o)
{
struct offset *offset;
return offset;
}
-void table_offset_add(struct table *t, struct offset *offset)
+static void table_offset_add(struct table *t, struct offset *offset)
{
list_add_tail(&offset->list, &t->offsets);
}
-void table_init(struct table *t)
+static void table_init(struct table *t)
{
INIT_LIST_HEAD(&t->offsets);
t->offset_max = 0;
t->table = NULL;
}
-void table_print(struct table *t)
+static void table_print(struct table *t)
{
unsigned nlloop, i, j, n, c, id;
printf("};\n");
}
-int table_build(struct table *t)
+static int table_build(struct table *t)
{
struct offset *offset;
unsigned i, m;
}
static char gpu_name[10];
-int parser_auth(struct table *t, const char *filename)
+static int parser_auth(struct table *t, const char *filename)
{
FILE *file;
regex_t mask_rex;
int r100_irq_process(struct radeon_device *rdev)
{
- uint32_t status;
+ uint32_t status, msi_rearm;
status = r100_irq_ack(rdev);
if (!status) {
}
status = r100_irq_ack(rdev);
}
+ if (rdev->msi_enabled) {
+ switch (rdev->family) {
+ case CHIP_RS400:
+ case CHIP_RS480:
+ msi_rearm = RREG32(RADEON_AIC_CNTL) & ~RS400_MSI_REARM;
+ WREG32(RADEON_AIC_CNTL, msi_rearm);
+ WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM);
+ break;
+ default:
+ msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
+ WREG32(RADEON_MSI_REARM_EN, msi_rearm);
+ WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ break;
+ }
+ }
return IRQ_HANDLED;
}
int r;
if (rdev->wb.wb_obj == NULL) {
- r = radeon_object_create(rdev, NULL, 4096,
+ r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE,
true,
RADEON_GEM_DOMAIN_GTT,
false, &rdev->wb.wb_obj);
indirect1_start = 16;
/* cp setup */
WREG32(0x718, pre_write_timer | (pre_write_limit << 28));
- WREG32(RADEON_CP_RB_CNTL,
-#ifdef __BIG_ENDIAN
- RADEON_BUF_SWAP_32BIT |
-#endif
- REG_SET(RADEON_RB_BUFSZ, rb_bufsz) |
+ tmp = (REG_SET(RADEON_RB_BUFSZ, rb_bufsz) |
REG_SET(RADEON_RB_BLKSZ, rb_blksz) |
REG_SET(RADEON_MAX_FETCH, max_fetch) |
RADEON_RB_NO_UPDATE);
+#ifdef __BIG_ENDIAN
+ tmp |= RADEON_BUF_SWAP_32BIT;
+#endif
+ WREG32(RADEON_CP_RB_CNTL, tmp);
+
/* Set ring address */
DRM_INFO("radeon: ring at 0x%016lX\n", (unsigned long)rdev->cp.gpu_addr);
WREG32(RADEON_CP_RB_BASE, rdev->cp.gpu_addr);
/* Force read & write ptr to 0 */
- tmp = RREG32(RADEON_CP_RB_CNTL);
WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA);
WREG32(RADEON_CP_RB_RPTR_WR, 0);
WREG32(RADEON_CP_RB_WPTR, 0);
/*
Find the total latency for the display data.
*/
- disp_latency_overhead.full = rfixed_const(80);
+ disp_latency_overhead.full = rfixed_const(8);
disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t)
{
DRM_ERROR("pitch %d\n", t->pitch);
+ DRM_ERROR("use_pitch %d\n", t->use_pitch);
DRM_ERROR("width %d\n", t->width);
+ DRM_ERROR("width_11 %d\n", t->width_11);
DRM_ERROR("height %d\n", t->height);
+ DRM_ERROR("height_11 %d\n", t->height_11);
DRM_ERROR("num levels %d\n", t->num_levels);
DRM_ERROR("depth %d\n", t->txdepth);
DRM_ERROR("bpp %d\n", t->cpp);
else
w = track->textures[u].pitch / (1 << i);
} else {
- w = track->textures[u].width / (1 << i);
+ w = track->textures[u].width;
if (rdev->family >= CHIP_RV515)
w |= track->textures[u].width_11;
+ w = w / (1 << i);
if (track->textures[u].roundup_w)
w = roundup_pow_of_two(w);
}
- h = track->textures[u].height / (1 << i);
+ h = track->textures[u].height;
if (rdev->family >= CHIP_RV515)
h |= track->textures[u].height_11;
+ h = h / (1 << i);
if (track->textures[u].roundup_h)
h = roundup_pow_of_two(h);
size += w * h;
tmp = RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD;
WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp);
WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, rdev->mc.gtt_location);
- tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 4096;
+ tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - RADEON_GPU_PAGE_SIZE;
WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, tmp);
WREG32_PCIE(RADEON_PCIE_TX_GART_START_HI, 0);
WREG32_PCIE(RADEON_PCIE_TX_GART_END_HI, 0);
}
/* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Get vram informations */
r300_vram_info(rdev);
/* Initialize memory controller (also test AGP) */
# define AVIVO_D1GRPH_TILED (1 << 20)
# define AVIVO_D1GRPH_MACRO_ADDRESS_MODE (1 << 21)
+/* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2
+ * block and vice versa. This applies to GRPH, CUR, etc.
+ */
#define AVIVO_D1GRPH_LUT_SEL 0x6108
#define AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x6110
+#define R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6914
+#define R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6114
#define AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x6118
+#define R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x691c
+#define R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x611c
#define AVIVO_D1GRPH_PITCH 0x6120
#define AVIVO_D1GRPH_SURFACE_OFFSET_X 0x6124
#define AVIVO_D1GRPH_SURFACE_OFFSET_Y 0x6128
# define AVIVO_D1CURSOR_MODE_MASK (3 << 8)
# define AVIVO_D1CURSOR_MODE_24BPP 2
#define AVIVO_D1CUR_SURFACE_ADDRESS 0x6408
+#define R700_D1CUR_SURFACE_ADDRESS_HIGH 0x6c0c
+#define R700_D2CUR_SURFACE_ADDRESS_HIGH 0x640c
#define AVIVO_D1CUR_SIZE 0x6410
#define AVIVO_D1CUR_POSITION 0x6414
#define AVIVO_D1CUR_HOT_SPOT 0x6418
}
/* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Get vram informations */
r520_vram_info(rdev);
/* Initialize memory controller (also test AGP) */
{
fixed20_12 a;
u32 tmp;
- int chansize;
+ int chansize, numchan;
int r;
/* Get VRAM informations */
- rdev->mc.vram_width = 128;
rdev->mc.vram_is_ddr = true;
tmp = RREG32(RAMCFG);
if (tmp & CHANSIZE_OVERRIDE) {
} else {
chansize = 32;
}
- if (rdev->family == CHIP_R600) {
- rdev->mc.vram_width = 8 * chansize;
- } else if (rdev->family == CHIP_RV670) {
- rdev->mc.vram_width = 4 * chansize;
- } else if ((rdev->family == CHIP_RV610) ||
- (rdev->family == CHIP_RV620)) {
- rdev->mc.vram_width = chansize;
- } else if ((rdev->family == CHIP_RV630) ||
- (rdev->family == CHIP_RV635)) {
- rdev->mc.vram_width = 2 * chansize;
+ tmp = RREG32(CHMAP);
+ switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
+ case 0:
+ default:
+ numchan = 1;
+ break;
+ case 1:
+ numchan = 2;
+ break;
+ case 2:
+ numchan = 4;
+ break;
+ case 3:
+ numchan = 8;
+ break;
}
+ rdev->mc.vram_width = numchan * chansize;
/* Could aper size report 0 ? */
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
rdev->mc.gtt_location = rdev->mc.mc_vram_size;
}
} else {
- if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) {
- rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) &
- 0xFFFF) << 24;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
- if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
- /* Enough place after vram */
- rdev->mc.gtt_location = tmp;
- } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) {
- /* Enough place before vram */
+ rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) &
+ 0xFFFF) << 24;
+ tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
+ if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
+ /* Enough place after vram */
+ rdev->mc.gtt_location = tmp;
+ } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) {
+ /* Enough place before vram */
+ rdev->mc.gtt_location = 0;
+ } else {
+ /* Not enough place after or before shrink
+ * gart size
+ */
+ if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) {
rdev->mc.gtt_location = 0;
+ rdev->mc.gtt_size = rdev->mc.vram_location;
} else {
- /* Not enough place after or before shrink
- * gart size
- */
- if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) {
- rdev->mc.gtt_location = 0;
- rdev->mc.gtt_size = rdev->mc.vram_location;
- } else {
- rdev->mc.gtt_location = tmp;
- rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp;
- }
+ rdev->mc.gtt_location = tmp;
+ rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp;
}
- rdev->mc.gtt_location = rdev->mc.mc_vram_size;
- } else {
- rdev->mc.vram_location = 0x00000000UL;
- rdev->mc.gtt_location = rdev->mc.mc_vram_size;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
}
+ rdev->mc.gtt_location = rdev->mc.mc_vram_size;
}
rdev->mc.vram_start = rdev->mc.vram_location;
rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
((rdev->family) == CHIP_RV630) ||
((rdev->family) == CHIP_RV610) ||
((rdev->family) == CHIP_RV620) ||
- ((rdev->family) == CHIP_RS780)) {
+ ((rdev->family) == CHIP_RS780) ||
+ ((rdev->family) == CHIP_RS880)) {
WREG32(DB_DEBUG, PREZ_MUST_WAIT_FOR_POSTZ_DONE);
} else {
WREG32(DB_DEBUG, 0);
tmp = RREG32(SQ_MS_FIFO_SIZES);
if (((rdev->family) == CHIP_RV610) ||
((rdev->family) == CHIP_RV620) ||
- ((rdev->family) == CHIP_RS780)) {
+ ((rdev->family) == CHIP_RS780) ||
+ ((rdev->family) == CHIP_RS880)) {
tmp = (CACHE_FIFO_SIZE(0xa) |
FETCH_FIFO_HIWATER(0xa) |
DONE_FIFO_HIWATER(0xe0) |
NUM_ES_STACK_ENTRIES(0));
} else if (((rdev->family) == CHIP_RV610) ||
((rdev->family) == CHIP_RV620) ||
- ((rdev->family) == CHIP_RS780)) {
+ ((rdev->family) == CHIP_RS780) ||
+ ((rdev->family) == CHIP_RS880)) {
/* no vertex cache */
sq_config &= ~VC_ENABLE;
if (((rdev->family) == CHIP_RV610) ||
((rdev->family) == CHIP_RV620) ||
- ((rdev->family) == CHIP_RS780)) {
+ ((rdev->family) == CHIP_RS780) ||
+ ((rdev->family) == CHIP_RS880)) {
WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(TC_ONLY));
} else {
WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(VC_AND_TC));
tmp = rdev->config.r600.max_pipes * 16;
switch (rdev->family) {
case CHIP_RV610:
- case CHIP_RS780:
case CHIP_RV620:
+ case CHIP_RS780:
+ case CHIP_RS880:
tmp += 32;
break;
case CHIP_RV670:
switch (rdev->family) {
case CHIP_RV610:
- case CHIP_RS780:
case CHIP_RV620:
+ case CHIP_RS780:
+ case CHIP_RS880:
tmp = TC_L2_SIZE(8);
break;
case CHIP_RV630:
/* Set ring buffer size */
rb_bufsz = drm_order(rdev->cp.ring_size / 8);
+ tmp = RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz;
#ifdef __BIG_ENDIAN
- WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE |
- (drm_order(4096/8) << 8) | rb_bufsz);
-#else
- WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(4096/8) << 8) | rb_bufsz);
+ tmp |= BUF_SWAP_32BIT;
#endif
+ WREG32(CP_RB_CNTL, tmp);
WREG32(CP_SEM_WAIT_TIMER, 0x4);
/* Set the write pointer delay */
WREG32(CP_RB_WPTR_DELAY, 0);
/* Initialize the ring buffer's read and write pointers */
- tmp = RREG32(CP_RB_CNTL);
WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
WREG32(CP_RB_RPTR_WR, 0);
WREG32(CP_RB_WPTR, 0);
int r;
if (rdev->wb.wb_obj == NULL) {
- r = radeon_object_create(rdev, NULL, 4096, true,
+ r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true,
RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj);
if (r) {
dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r);
uint64_t src_offset, uint64_t dst_offset,
unsigned num_pages, struct radeon_fence *fence)
{
- r600_blit_prepare_copy(rdev, num_pages * 4096);
- r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * 4096);
+ r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+ r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
r600_blit_done_copy(rdev, fence);
return 0;
}
r600_scratch_init(rdev);
/* Initialize surface registers */
radeon_surface_init(rdev);
+ /* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
r = radeon_clocks_init(rdev);
if (r)
return r;
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Fence driver */
r = radeon_fence_driver_init(rdev);
if (r)
u64 vb_addr;
u32 *vb;
+ vb = r600_nomm_get_vb_ptr(dev);
+
if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
max_bytes = 8192;
if (!dev_priv->blit_vb)
return;
set_shaders(dev);
+ vb = r600_nomm_get_vb_ptr(dev);
}
- vb = r600_nomm_get_vb_ptr(dev);
vb[0] = i2f(dst_x);
vb[1] = 0;
return;
set_shaders(dev);
+ vb = r600_nomm_get_vb_ptr(dev);
}
- vb = r600_nomm_get_vb_ptr(dev);
vb[0] = i2f(dst_x / 4);
vb[1] = 0;
{
drm_radeon_private_t *dev_priv = dev->dev_private;
int cb_format, tex_format;
+ int sx2, sy2, dx2, dy2;
u64 vb_addr;
u32 *vb;
}
vb = r600_nomm_get_vb_ptr(dev);
- if (cpp == 4) {
- cb_format = COLOR_8_8_8_8;
- tex_format = FMT_8_8_8_8;
- } else if (cpp == 2) {
- cb_format = COLOR_5_6_5;
- tex_format = FMT_5_6_5;
- } else {
- cb_format = COLOR_8;
- tex_format = FMT_8;
- }
+ sx2 = sx + w;
+ sy2 = sy + h;
+ dx2 = dx + w;
+ dy2 = dy + h;
vb[0] = i2f(dx);
vb[1] = i2f(dy);
vb[3] = i2f(sy);
vb[4] = i2f(dx);
- vb[5] = i2f(dy + h);
+ vb[5] = i2f(dy2);
vb[6] = i2f(sx);
- vb[7] = i2f(sy + h);
+ vb[7] = i2f(sy2);
+
+ vb[8] = i2f(dx2);
+ vb[9] = i2f(dy2);
+ vb[10] = i2f(sx2);
+ vb[11] = i2f(sy2);
- vb[8] = i2f(dx + w);
- vb[9] = i2f(dy + h);
- vb[10] = i2f(sx + w);
- vb[11] = i2f(sy + h);
+ switch(cpp) {
+ case 4:
+ cb_format = COLOR_8_8_8_8;
+ tex_format = FMT_8_8_8_8;
+ break;
+ case 2:
+ cb_format = COLOR_5_6_5;
+ tex_format = FMT_5_6_5;
+ break;
+ default:
+ cb_format = COLOR_8;
+ tex_format = FMT_8;
+ break;
+ }
/* src */
set_tex_resource(dev_priv, tex_format,
src_pitch / cpp,
- sy + h, src_pitch / cpp,
+ sy2, src_pitch / cpp,
src_gpu_addr);
cp_set_surface_sync(dev_priv,
- R600_TC_ACTION_ENA, (src_pitch * (sy + h)), src_gpu_addr);
+ R600_TC_ACTION_ENA, src_pitch * sy2, src_gpu_addr);
/* dst */
set_render_target(dev_priv, cb_format,
- dst_pitch / cpp, dy + h,
+ dst_pitch / cpp, dy2,
dst_gpu_addr);
/* scissors */
- set_scissors(dev_priv, dx, dy, dx + w, dy + h);
+ set_scissors(dev_priv, dx, dy, dx2, dy2);
/* Vertex buffer setup */
vb_addr = dev_priv->gart_buffers_offset +
cp_set_surface_sync(dev_priv,
R600_CB_ACTION_ENA | R600_CB0_DEST_BASE_ENA,
- dst_pitch * (dy + h), dst_gpu_addr);
+ dst_pitch * dy2, dst_gpu_addr);
dev_priv->blit_vb->used += 12 * 4;
}
if ((rdev->family == CHIP_RV610) ||
(rdev->family == CHIP_RV620) ||
(rdev->family == CHIP_RS780) ||
- (rdev->family == CHIP_RS780) ||
+ (rdev->family == CHIP_RS880) ||
(rdev->family == CHIP_RV710))
sq_config = 0;
else
DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr,
size_bytes, rdev->r600_blit.vb_used);
+ vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
max_bytes = 8192;
vb = r600_nomm_get_vb_ptr(dev);
#endif
}
- vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
vb[0] = i2f(dst_x);
vb[1] = 0;
vb = r600_nomm_get_vb_ptr(dev);
}
#endif
- vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
vb[0] = i2f(dst_x / 4);
vb[1] = 0;
for (i = 0; i < pkt->count; i++) {
reg = start_reg + (4 * i);
switch (reg) {
+ case SQ_ESGS_RING_BASE:
+ case SQ_GSVS_RING_BASE:
+ case SQ_ESTMP_RING_BASE:
+ case SQ_GSTMP_RING_BASE:
+ case SQ_VSTMP_RING_BASE:
+ case SQ_PSTMP_RING_BASE:
+ case SQ_FBUF_RING_BASE:
+ case SQ_REDUC_RING_BASE:
+ case SX_MEMORY_EXPORT_BASE:
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad SET_CONFIG_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ break;
case CP_COHER_BASE:
/* use PACKET3_SURFACE_SYNC */
return -EINVAL;
reg = start_reg + (4 * i);
switch (reg) {
case DB_DEPTH_BASE:
+ case DB_HTILE_DATA_BASE:
case CB_COLOR0_BASE:
case CB_COLOR1_BASE:
case CB_COLOR2_BASE:
#define DB_DEBUG 0x9830
#define PREZ_MUST_WAIT_FOR_POSTZ_DONE (1 << 31)
#define DB_DEPTH_BASE 0x2800C
+#define DB_HTILE_DATA_BASE 0x28014
#define DB_WATERMARKS 0x9838
#define DEPTH_FREE(x) ((x) << 0)
#define DEPTH_FLUSH(x) ((x) << 5)
#define SQ_STACK_RESOURCE_MGMT_2 0x8c14
# define NUM_GS_STACK_ENTRIES(x) ((x) << 0)
# define NUM_ES_STACK_ENTRIES(x) ((x) << 16)
+#define SQ_ESGS_RING_BASE 0x8c40
+#define SQ_GSVS_RING_BASE 0x8c48
+#define SQ_ESTMP_RING_BASE 0x8c50
+#define SQ_GSTMP_RING_BASE 0x8c58
+#define SQ_VSTMP_RING_BASE 0x8c60
+#define SQ_PSTMP_RING_BASE 0x8c68
+#define SQ_FBUF_RING_BASE 0x8c70
+#define SQ_REDUC_RING_BASE 0x8c78
#define GRBM_CNTL 0x8000
# define GRBM_READ_TIMEOUT(x) ((x) << 0)
#define PCIE_PORT_INDEX 0x0038
#define PCIE_PORT_DATA 0x003C
+#define CHMAP 0x2004
+#define NOOFCHAN_SHIFT 12
+#define NOOFCHAN_MASK 0x00003000
+
#define RAMCFG 0x2408
#define NOOFBANK_SHIFT 0
#define NOOFBANK_MASK 0x00000001
#define SX_MISC 0x28350
+#define SX_MEMORY_EXPORT_BASE 0x9010
#define SX_DEBUG_1 0x9054
#define SMX_EVENT_RELEASE (1 << 0)
#define ENABLE_NEW_SMX_ADDRESS (1 << 16)
uint32_t default_sclk;
};
+/*
+ * Power management
+ */
+int radeon_pm_init(struct radeon_device *rdev);
/*
* Fences.
struct radeon_gart_table_vram vram;
};
+#define RADEON_GPU_PAGE_SIZE 4096
+
struct radeon_gart {
dma_addr_t table_addr;
unsigned num_gpu_pages;
uint64_t dst_offset,
unsigned num_pages,
struct radeon_fence *fence);
+ uint32_t (*get_engine_clock)(struct radeon_device *rdev);
void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock);
+ uint32_t (*get_memory_clock)(struct radeon_device *rdev);
void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
void (*set_clock_gating)(struct radeon_device *rdev, int enable);
const struct firmware *me_fw; /* all family ME firmware */
const struct firmware *pfp_fw; /* r6/700 PFP firmware */
struct r600_blit r600_blit;
+ int msi_enabled; /* msi enabled */
};
int radeon_device_init(struct radeon_device *rdev,
#define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f))
#define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f))
#define radeon_copy(rdev, s, d, np, f) (rdev)->asic->copy((rdev), (s), (d), (np), (f))
+#define radeon_get_engine_clock(rdev) (rdev)->asic->get_engine_clock((rdev))
#define radeon_set_engine_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
+#define radeon_get_memory_clock(rdev) (rdev)->asic->get_memory_clock((rdev))
#define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
#define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
#define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
/*
* common functions
*/
+uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev);
void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock);
void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable);
+uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev);
void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock);
+uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev);
void radeon_atom_set_memory_clock(struct radeon_device *rdev, uint32_t mem_clock);
void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
.copy_blit = &r100_copy_blit,
.copy_dma = NULL,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
.set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = NULL,
.set_memory_clock = NULL,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_legacy_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
.set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = NULL,
.set_memory_clock = NULL,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_legacy_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_legacy_get_engine_clock,
.set_engine_clock = &radeon_legacy_set_engine_clock,
+ .get_memory_clock = NULL,
.set_memory_clock = NULL,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_legacy_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r300_copy_dma,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
.copy_blit = &r100_copy_blit,
.copy_dma = &r300_copy_dma,
.copy = &r100_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = &rv370_set_pcie_lanes,
.set_clock_gating = &radeon_atom_set_clock_gating,
.copy_blit = &r600_copy_blit,
.copy_dma = &r600_copy_blit,
.copy = &r600_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
.copy_blit = &r600_copy_blit,
.copy_dma = &r600_copy_blit,
.copy = &r600_copy_blit,
+ .get_engine_clock = &radeon_atom_get_engine_clock,
.set_engine_clock = &radeon_atom_set_engine_clock,
+ .get_memory_clock = &radeon_atom_get_memory_clock,
.set_memory_clock = &radeon_atom_set_memory_clock,
.set_pcie_lanes = NULL,
.set_clock_gating = &radeon_atom_set_clock_gating,
uint32_t supported_device,
int connector_type,
struct radeon_i2c_bus_rec *i2c_bus,
- bool linkb, uint32_t igp_lane_info);
+ bool linkb, uint32_t igp_lane_info,
+ uint16_t connector_object_id);
/* from radeon_legacy_encoder.c */
extern void
DRM_MODE_CONNECTOR_DisplayPort
};
+const uint16_t supported_devices_connector_object_id_convert[] = {
+ CONNECTOR_OBJECT_ID_NONE,
+ CONNECTOR_OBJECT_ID_VGA,
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I, /* not all boards support DL */
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D, /* not all boards support DL */
+ CONNECTOR_OBJECT_ID_VGA, /* technically DVI-A */
+ CONNECTOR_OBJECT_ID_COMPOSITE,
+ CONNECTOR_OBJECT_ID_SVIDEO,
+ CONNECTOR_OBJECT_ID_LVDS,
+ CONNECTOR_OBJECT_ID_9PIN_DIN,
+ CONNECTOR_OBJECT_ID_9PIN_DIN,
+ CONNECTOR_OBJECT_ID_DISPLAYPORT,
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_A,
+ CONNECTOR_OBJECT_ID_HDMI_TYPE_B,
+ CONNECTOR_OBJECT_ID_SVIDEO
+};
+
const int object_connector_convert[] = {
DRM_MODE_CONNECTOR_Unknown,
DRM_MODE_CONNECTOR_DVII,
ATOM_OBJECT_HEADER *obj_header;
int i, j, path_size, device_support;
int connector_type;
- uint16_t igp_lane_info, conn_id;
+ uint16_t igp_lane_info, conn_id, connector_object_id;
bool linkb;
struct radeon_i2c_bus_rec ddc_bus;
ATOM_DEVICE_CV_SUPPORT)
continue;
- if ((rdev->family == CHIP_RS780) &&
+ /* IGP chips */
+ if ((rdev->flags & RADEON_IS_IGP) &&
(con_obj_id ==
CONNECTOR_OBJECT_ID_PCIE_CONNECTOR)) {
uint16_t igp_offset = 0;
connector_type =
object_connector_convert
[ct];
+ connector_object_id = ct;
igp_lane_info =
slot_config & 0xffff;
} else
igp_lane_info = 0;
connector_type =
object_connector_convert[con_obj_id];
+ connector_object_id = con_obj_id;
}
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
le16_to_cpu(path->
usDeviceTag),
connector_type, &ddc_bus,
- linkb, igp_lane_info);
+ linkb, igp_lane_info,
+ connector_object_id);
}
}
return true;
}
+static uint16_t atombios_get_connector_object_id(struct drm_device *dev,
+ int connector_type,
+ uint16_t devices)
+{
+ struct radeon_device *rdev = dev->dev_private;
+
+ if (rdev->flags & RADEON_IS_IGP) {
+ return supported_devices_connector_object_id_convert
+ [connector_type];
+ } else if (((connector_type == DRM_MODE_CONNECTOR_DVII) ||
+ (connector_type == DRM_MODE_CONNECTOR_DVID)) &&
+ (devices & ATOM_DEVICE_DFP2_SUPPORT)) {
+ struct radeon_mode_info *mode_info = &rdev->mode_info;
+ struct atom_context *ctx = mode_info->atom_context;
+ int index = GetIndexIntoMasterTable(DATA, XTMDS_Info);
+ uint16_t size, data_offset;
+ uint8_t frev, crev;
+ ATOM_XTMDS_INFO *xtmds;
+
+ atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset);
+ xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset);
+
+ if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) {
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I;
+ else
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D;
+ } else {
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
+ else
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D;
+ }
+ } else {
+ return supported_devices_connector_object_id_convert
+ [connector_type];
+ }
+}
+
struct bios_connector {
bool valid;
uint16_t line_mux;
/* add the connectors */
for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) {
- if (bios_connectors[i].valid)
+ if (bios_connectors[i].valid) {
+ uint16_t connector_object_id =
+ atombios_get_connector_object_id(dev,
+ bios_connectors[i].connector_type,
+ bios_connectors[i].devices);
radeon_add_atom_connector(dev,
bios_connectors[i].line_mux,
bios_connectors[i].devices,
bios_connectors[i].
connector_type,
&bios_connectors[i].ddc_bus,
- false, 0);
+ false, 0,
+ connector_object_id);
+ }
}
radeon_link_encoder_connector(dev);
le16_to_cpu(firmware_info->info.usReferenceClock);
p1pll->reference_div = 0;
- p1pll->pll_out_min =
- le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output);
+ if (crev < 2)
+ p1pll->pll_out_min =
+ le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output);
+ else
+ p1pll->pll_out_min =
+ le32_to_cpu(firmware_info->info_12.ulMinPixelClockPLL_Output);
p1pll->pll_out_max =
le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output);
p1pll->pll_out_min = 64800;
else
p1pll->pll_out_min = 20000;
+ } else if (p1pll->pll_out_min > 64800) {
+ /* Limiting the pll output range is a good thing generally as
+ * it limits the number of possible pll combinations for a given
+ * frequency presumably to the ones that work best on each card.
+ * However, certain duallink DVI monitors seem to like
+ * pll combinations that would be limited by this at least on
+ * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per
+ * family.
+ */
+ p1pll->pll_out_min = 64800;
}
p1pll->pll_in_min =
return false;
}
+static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct
+ radeon_encoder
+ *encoder,
+ int id)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct radeon_device *rdev = dev->dev_private;
+ struct radeon_mode_info *mode_info = &rdev->mode_info;
+ int index = GetIndexIntoMasterTable(DATA, PPLL_SS_Info);
+ uint16_t data_offset;
+ struct _ATOM_SPREAD_SPECTRUM_INFO *ss_info;
+ uint8_t frev, crev;
+ struct radeon_atom_ss *ss = NULL;
+
+ if (id > ATOM_MAX_SS_ENTRY)
+ return NULL;
+
+ atom_parse_data_header(mode_info->atom_context, index, NULL, &frev,
+ &crev, &data_offset);
+
+ ss_info =
+ (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset);
+
+ if (ss_info) {
+ ss =
+ kzalloc(sizeof(struct radeon_atom_ss), GFP_KERNEL);
+
+ if (!ss)
+ return NULL;
+
+ ss->percentage = le16_to_cpu(ss_info->asSS_Info[id].usSpreadSpectrumPercentage);
+ ss->type = ss_info->asSS_Info[id].ucSpreadSpectrumType;
+ ss->step = ss_info->asSS_Info[id].ucSS_Step;
+ ss->delay = ss_info->asSS_Info[id].ucSS_Delay;
+ ss->range = ss_info->asSS_Info[id].ucSS_Range;
+ ss->refdiv = ss_info->asSS_Info[id].ucRecommendedRef_Div;
+ }
+ return ss;
+}
+
union lvds_info {
struct _ATOM_LVDS_INFO info;
struct _ATOM_LVDS_INFO_V12 info_12;
if (!lvds)
return NULL;
- lvds->native_mode.dotclock =
+ lvds->native_mode.clock =
le16_to_cpu(lvds_info->info.sLCDTiming.usPixClk) * 10;
- lvds->native_mode.panel_xres =
+ lvds->native_mode.hdisplay =
le16_to_cpu(lvds_info->info.sLCDTiming.usHActive);
- lvds->native_mode.panel_yres =
+ lvds->native_mode.vdisplay =
le16_to_cpu(lvds_info->info.sLCDTiming.usVActive);
- lvds->native_mode.hblank =
- le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time);
- lvds->native_mode.hoverplus =
- le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset);
- lvds->native_mode.hsync_width =
- le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth);
- lvds->native_mode.vblank =
- le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time);
- lvds->native_mode.voverplus =
- le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncOffset);
- lvds->native_mode.vsync_width =
- le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth);
+ lvds->native_mode.htotal = lvds->native_mode.hdisplay +
+ le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time);
+ lvds->native_mode.hsync_start = lvds->native_mode.hdisplay +
+ le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset);
+ lvds->native_mode.hsync_end = lvds->native_mode.hsync_start +
+ le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth);
+ lvds->native_mode.vtotal = lvds->native_mode.vdisplay +
+ le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time);
+ lvds->native_mode.vsync_start = lvds->native_mode.vdisplay +
+ le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth);
+ lvds->native_mode.vsync_end = lvds->native_mode.vsync_start +
+ le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth);
lvds->panel_pwr_delay =
le16_to_cpu(lvds_info->info.usOffDelayInMs);
lvds->lvds_misc = lvds_info->info.ucLVDS_Misc;
+ /* set crtc values */
+ drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V);
+
+ lvds->ss = radeon_atombios_get_ss_info(encoder, lvds_info->info.ucSS_Id);
encoder->native_mode = lvds->native_mode;
}
}
bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
- SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing,
- int32_t *pixel_clock)
+ struct drm_display_mode *mode)
{
struct radeon_mode_info *mode_info = &rdev->mode_info;
ATOM_ANALOG_TV_INFO *tv_info;
ATOM_DTD_FORMAT *dtd_timings;
int data_index = GetIndexIntoMasterTable(DATA, AnalogTV_Info);
u8 frev, crev;
- uint16_t data_offset;
+ u16 data_offset, misc;
atom_parse_data_header(mode_info->atom_context, data_index, NULL, &frev, &crev, &data_offset);
if (index > MAX_SUPPORTED_TV_TIMING)
return false;
- crtc_timing->usH_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total);
- crtc_timing->usH_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp);
- crtc_timing->usH_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart);
- crtc_timing->usH_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth);
-
- crtc_timing->usV_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total);
- crtc_timing->usV_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp);
- crtc_timing->usV_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart);
- crtc_timing->usV_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth);
-
- crtc_timing->susModeMiscInfo = tv_info->aModeTimings[index].susModeMiscInfo;
-
- crtc_timing->ucOverscanRight = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanRight);
- crtc_timing->ucOverscanLeft = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanLeft);
- crtc_timing->ucOverscanBottom = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanBottom);
- crtc_timing->ucOverscanTop = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanTop);
- *pixel_clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10;
+ mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total);
+ mode->crtc_hdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp);
+ mode->crtc_hsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart);
+ mode->crtc_hsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart) +
+ le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth);
+
+ mode->crtc_vtotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total);
+ mode->crtc_vdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp);
+ mode->crtc_vsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart);
+ mode->crtc_vsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart) +
+ le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth);
+
+ mode->flags = 0;
+ misc = le16_to_cpu(tv_info->aModeTimings[index].susModeMiscInfo.usAccess);
+ if (misc & ATOM_VSYNC_POLARITY)
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
+ if (misc & ATOM_HSYNC_POLARITY)
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+ if (misc & ATOM_COMPOSITESYNC)
+ mode->flags |= DRM_MODE_FLAG_CSYNC;
+ if (misc & ATOM_INTERLACE)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+ if (misc & ATOM_DOUBLE_CLOCK_MODE)
+ mode->flags |= DRM_MODE_FLAG_DBLSCAN;
+
+ mode->clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10;
if (index == 1) {
/* PAL timings appear to have wrong values for totals */
- crtc_timing->usH_Total -= 1;
- crtc_timing->usV_Total -= 1;
+ mode->crtc_htotal -= 1;
+ mode->crtc_vtotal -= 1;
}
break;
case 2:
return false;
dtd_timings = &tv_info_v1_2->aModeTimings[index];
- crtc_timing->usH_Total = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHBlanking_Time);
- crtc_timing->usH_Disp = le16_to_cpu(dtd_timings->usHActive);
- crtc_timing->usH_SyncStart = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHSyncOffset);
- crtc_timing->usH_SyncWidth = le16_to_cpu(dtd_timings->usHSyncWidth);
- crtc_timing->usV_Total = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVBlanking_Time);
- crtc_timing->usV_Disp = le16_to_cpu(dtd_timings->usVActive);
- crtc_timing->usV_SyncStart = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVSyncOffset);
- crtc_timing->usV_SyncWidth = le16_to_cpu(dtd_timings->usVSyncWidth);
-
- crtc_timing->susModeMiscInfo.usAccess = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess);
- *pixel_clock = le16_to_cpu(dtd_timings->usPixClk) * 10;
+ mode->crtc_htotal = le16_to_cpu(dtd_timings->usHActive) +
+ le16_to_cpu(dtd_timings->usHBlanking_Time);
+ mode->crtc_hdisplay = le16_to_cpu(dtd_timings->usHActive);
+ mode->crtc_hsync_start = le16_to_cpu(dtd_timings->usHActive) +
+ le16_to_cpu(dtd_timings->usHSyncOffset);
+ mode->crtc_hsync_end = mode->crtc_hsync_start +
+ le16_to_cpu(dtd_timings->usHSyncWidth);
+
+ mode->crtc_vtotal = le16_to_cpu(dtd_timings->usVActive) +
+ le16_to_cpu(dtd_timings->usVBlanking_Time);
+ mode->crtc_vdisplay = le16_to_cpu(dtd_timings->usVActive);
+ mode->crtc_vsync_start = le16_to_cpu(dtd_timings->usVActive) +
+ le16_to_cpu(dtd_timings->usVSyncOffset);
+ mode->crtc_vsync_end = mode->crtc_vsync_start +
+ le16_to_cpu(dtd_timings->usVSyncWidth);
+
+ mode->flags = 0;
+ misc = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess);
+ if (misc & ATOM_VSYNC_POLARITY)
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
+ if (misc & ATOM_HSYNC_POLARITY)
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+ if (misc & ATOM_COMPOSITESYNC)
+ mode->flags |= DRM_MODE_FLAG_CSYNC;
+ if (misc & ATOM_INTERLACE)
+ mode->flags |= DRM_MODE_FLAG_INTERLACE;
+ if (misc & ATOM_DOUBLE_CLOCK_MODE)
+ mode->flags |= DRM_MODE_FLAG_DBLSCAN;
+
+ mode->clock = le16_to_cpu(dtd_timings->usPixClk) * 10;
break;
}
return true;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
}
+uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev)
+{
+ GET_ENGINE_CLOCK_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, GetEngineClock);
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ return args.ulReturnEngineClock;
+}
+
+uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev)
+{
+ GET_MEMORY_CLOCK_PS_ALLOCATION args;
+ int index = GetIndexIntoMasterTable(COMMAND, GetMemoryClock);
+
+ atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ return args.ulReturnMemoryClock;
+}
+
void radeon_atom_set_engine_clock(struct radeon_device *rdev,
uint32_t eng_clock)
{
if (r) {
goto out_cleanup;
}
- r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence);
+ r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence);
if (r) {
goto out_cleanup;
}
if (r) {
goto out_cleanup;
}
- r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence);
+ r = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence);
if (r) {
goto out_cleanup;
}
vram_base = drm_get_resource_start(rdev->ddev, 0);
bios = ioremap(vram_base, size);
if (!bios) {
- DRM_ERROR("Unable to mmap vram\n");
return false;
}
if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
iounmap(bios);
- DRM_ERROR("bad rom signature\n");
return false;
}
rdev->bios = kmalloc(size, GFP_KERNEL);
if (rdev->bios == NULL) {
iounmap(bios);
- DRM_ERROR("kmalloc failed\n");
return false;
}
memcpy(rdev->bios, bios, size);
#include "atom.h"
/* 10 khz */
-static uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev)
+uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev)
{
struct radeon_pll *spll = &rdev->clock.spll;
uint32_t fb_div, ref_div, post_div, sclk;
uint32_t connector_id,
uint32_t supported_device,
int connector_type,
- struct radeon_i2c_bus_rec *i2c_bus);
+ struct radeon_i2c_bus_rec *i2c_bus,
+ uint16_t connector_object_id);
/* from radeon_legacy_encoder.c */
extern void
lvds->panel_blon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY2_SHIFT) & 0xf;
if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE)
- lvds->native_mode.panel_yres =
+ lvds->native_mode.vdisplay =
((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >>
RADEON_VERT_PANEL_SHIFT) + 1;
else
- lvds->native_mode.panel_yres =
+ lvds->native_mode.vdisplay =
(RREG32(RADEON_CRTC_V_TOTAL_DISP) >> 16) + 1;
if (fp_horz_stretch & RADEON_HORZ_STRETCH_ENABLE)
- lvds->native_mode.panel_xres =
+ lvds->native_mode.hdisplay =
(((fp_horz_stretch & RADEON_HORZ_PANEL_SIZE) >>
RADEON_HORZ_PANEL_SHIFT) + 1) * 8;
else
- lvds->native_mode.panel_xres =
+ lvds->native_mode.hdisplay =
((RREG32(RADEON_CRTC_H_TOTAL_DISP) >> 16) + 1) * 8;
- if ((lvds->native_mode.panel_xres < 640) ||
- (lvds->native_mode.panel_yres < 480)) {
- lvds->native_mode.panel_xres = 640;
- lvds->native_mode.panel_yres = 480;
+ if ((lvds->native_mode.hdisplay < 640) ||
+ (lvds->native_mode.vdisplay < 480)) {
+ lvds->native_mode.hdisplay = 640;
+ lvds->native_mode.vdisplay = 480;
}
ppll_div_sel = RREG8(RADEON_CLOCK_CNTL_INDEX + 1) & 0x3;
lvds->panel_vcc_delay = 200;
DRM_INFO("Panel info derived from registers\n");
- DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres,
- lvds->native_mode.panel_yres);
+ DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay,
+ lvds->native_mode.vdisplay);
return lvds;
}
DRM_INFO("Panel ID String: %s\n", stmp);
- lvds->native_mode.panel_xres = RBIOS16(lcd_info + 0x19);
- lvds->native_mode.panel_yres = RBIOS16(lcd_info + 0x1b);
+ lvds->native_mode.hdisplay = RBIOS16(lcd_info + 0x19);
+ lvds->native_mode.vdisplay = RBIOS16(lcd_info + 0x1b);
- DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres,
- lvds->native_mode.panel_yres);
+ DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay,
+ lvds->native_mode.vdisplay);
lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c);
if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0)
if (tmp == 0)
break;
- if ((RBIOS16(tmp) == lvds->native_mode.panel_xres) &&
+ if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) &&
(RBIOS16(tmp + 2) ==
- lvds->native_mode.panel_yres)) {
- lvds->native_mode.hblank =
- (RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8;
- lvds->native_mode.hoverplus =
- (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) -
- 1) * 8;
- lvds->native_mode.hsync_width =
- RBIOS8(tmp + 23) * 8;
-
- lvds->native_mode.vblank = (RBIOS16(tmp + 24) -
- RBIOS16(tmp + 26));
- lvds->native_mode.voverplus =
- ((RBIOS16(tmp + 28) & 0x7ff) -
- RBIOS16(tmp + 26));
- lvds->native_mode.vsync_width =
- ((RBIOS16(tmp + 28) & 0xf800) >> 11);
- lvds->native_mode.dotclock =
- RBIOS16(tmp + 9) * 10;
+ lvds->native_mode.vdisplay)) {
+ lvds->native_mode.htotal = RBIOS16(tmp + 17) * 8;
+ lvds->native_mode.hsync_start = RBIOS16(tmp + 21) * 8;
+ lvds->native_mode.hsync_end = (RBIOS8(tmp + 23) +
+ RBIOS16(tmp + 21)) * 8;
+
+ lvds->native_mode.vtotal = RBIOS16(tmp + 24);
+ lvds->native_mode.vsync_start = RBIOS16(tmp + 28) & 0x7ff;
+ lvds->native_mode.vsync_end =
+ ((RBIOS16(tmp + 28) & 0xf800) >> 11) +
+ (RBIOS16(tmp + 28) & 0x7ff);
+
+ lvds->native_mode.clock = RBIOS16(tmp + 9) * 10;
lvds->native_mode.flags = 0;
+ /* set crtc values */
+ drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V);
+
}
}
} else {
radeon_add_legacy_connector(dev, 0,
ATOM_DEVICE_CRT1_SUPPORT,
DRM_MODE_CONNECTOR_VGA,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
} else if (rdev->flags & RADEON_IS_MOBILITY) {
/* LVDS */
ddc_i2c = combios_setup_i2c_bus(RADEON_LCD_GPIO_MASK);
radeon_add_legacy_connector(dev, 0,
ATOM_DEVICE_LCD1_SUPPORT,
DRM_MODE_CONNECTOR_LVDS,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_LVDS);
/* VGA - primary dac */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
radeon_add_legacy_connector(dev, 1,
ATOM_DEVICE_CRT1_SUPPORT,
DRM_MODE_CONNECTOR_VGA,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
} else {
/* DVI-I - tv dac, int tmds */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
ATOM_DEVICE_DFP1_SUPPORT |
ATOM_DEVICE_CRT2_SUPPORT,
DRM_MODE_CONNECTOR_DVII,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I);
/* VGA - primary dac */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
radeon_add_legacy_connector(dev, 1,
ATOM_DEVICE_CRT1_SUPPORT,
DRM_MODE_CONNECTOR_VGA,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
}
if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) {
radeon_add_legacy_connector(dev, 2,
ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
}
break;
case CT_IBOOK:
0),
ATOM_DEVICE_LCD1_SUPPORT);
radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
- DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+ DRM_MODE_CONNECTOR_LVDS, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_LVDS);
/* VGA - TV DAC */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
radeon_add_legacy_encoder(dev,
2),
ATOM_DEVICE_CRT2_SUPPORT);
radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
- DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_POWERBOOK_EXTERNAL:
DRM_INFO("Connector Table: %d (powerbook external tmds)\n",
0),
ATOM_DEVICE_LCD1_SUPPORT);
radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
- DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+ DRM_MODE_CONNECTOR_LVDS, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_LVDS);
/* DVI-I - primary dac, ext tmds */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
radeon_add_legacy_encoder(dev,
ATOM_DEVICE_CRT1_SUPPORT,
1),
ATOM_DEVICE_CRT1_SUPPORT);
+ /* XXX some are SL */
radeon_add_legacy_connector(dev, 1,
ATOM_DEVICE_DFP2_SUPPORT |
ATOM_DEVICE_CRT1_SUPPORT,
- DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+ DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_POWERBOOK_INTERNAL:
DRM_INFO("Connector Table: %d (powerbook internal tmds)\n",
0),
ATOM_DEVICE_LCD1_SUPPORT);
radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
- DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+ DRM_MODE_CONNECTOR_LVDS, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_LVDS);
/* DVI-I - primary dac, int tmds */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
radeon_add_legacy_encoder(dev,
radeon_add_legacy_connector(dev, 1,
ATOM_DEVICE_DFP1_SUPPORT |
ATOM_DEVICE_CRT1_SUPPORT,
- DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+ DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_POWERBOOK_VGA:
DRM_INFO("Connector Table: %d (powerbook vga)\n",
0),
ATOM_DEVICE_LCD1_SUPPORT);
radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT,
- DRM_MODE_CONNECTOR_LVDS, &ddc_i2c);
+ DRM_MODE_CONNECTOR_LVDS, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_LVDS);
/* VGA - primary dac */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
radeon_add_legacy_encoder(dev,
1),
ATOM_DEVICE_CRT1_SUPPORT);
radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT,
- DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_MINI_EXTERNAL:
DRM_INFO("Connector Table: %d (mini external tmds)\n",
ATOM_DEVICE_CRT2_SUPPORT,
2),
ATOM_DEVICE_CRT2_SUPPORT);
+ /* XXX are any DL? */
radeon_add_legacy_connector(dev, 0,
ATOM_DEVICE_DFP2_SUPPORT |
ATOM_DEVICE_CRT2_SUPPORT,
- DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+ DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_MINI_INTERNAL:
DRM_INFO("Connector Table: %d (mini internal tmds)\n",
radeon_add_legacy_connector(dev, 0,
ATOM_DEVICE_DFP1_SUPPORT |
ATOM_DEVICE_CRT2_SUPPORT,
- DRM_MODE_CONNECTOR_DVII, &ddc_i2c);
+ DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_IMAC_G5_ISIGHT:
DRM_INFO("Connector Table: %d (imac g5 isight)\n",
0),
ATOM_DEVICE_DFP1_SUPPORT);
radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT,
- DRM_MODE_CONNECTOR_DVID, &ddc_i2c);
+ DRM_MODE_CONNECTOR_DVID, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D);
/* VGA - tv dac */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC);
radeon_add_legacy_encoder(dev,
2),
ATOM_DEVICE_CRT2_SUPPORT);
radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
- DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
case CT_EMAC:
DRM_INFO("Connector Table: %d (emac)\n",
1),
ATOM_DEVICE_CRT1_SUPPORT);
radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT,
- DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
/* VGA - tv dac */
ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC);
radeon_add_legacy_encoder(dev,
2),
ATOM_DEVICE_CRT2_SUPPORT);
radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT,
- DRM_MODE_CONNECTOR_VGA, &ddc_i2c);
+ DRM_MODE_CONNECTOR_VGA, &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
/* TV - TV DAC */
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id(dev,
ATOM_DEVICE_TV1_SUPPORT);
radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT,
DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
default:
DRM_INFO("Connector table: %d (invalid)\n",
return true;
}
+static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev)
+{
+ /* Acer 5102 has non-existent TV port */
+ if (dev->pdev->device == 0x5975 &&
+ dev->pdev->subsystem_vendor == 0x1025 &&
+ dev->pdev->subsystem_device == 0x009f)
+ return false;
+
+ /* HP dc5750 has non-existent TV port */
+ if (dev->pdev->device == 0x5974 &&
+ dev->pdev->subsystem_vendor == 0x103c &&
+ dev->pdev->subsystem_device == 0x280a)
+ return false;
+
+ return true;
+}
+
+static uint16_t combios_check_dl_dvi(struct drm_device *dev, int is_dvi_d)
+{
+ struct radeon_device *rdev = dev->dev_private;
+ uint32_t ext_tmds_info;
+
+ if (rdev->flags & RADEON_IS_IGP) {
+ if (is_dvi_d)
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D;
+ else
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
+ }
+ ext_tmds_info = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE);
+ if (ext_tmds_info) {
+ uint8_t rev = RBIOS8(ext_tmds_info);
+ uint8_t flags = RBIOS8(ext_tmds_info + 4 + 5);
+ if (rev >= 3) {
+ if (is_dvi_d)
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D;
+ else
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I;
+ } else {
+ if (flags & 1) {
+ if (is_dvi_d)
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D;
+ else
+ return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I;
+ }
+ }
+ }
+ if (is_dvi_d)
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D;
+ else
+ return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
+}
+
bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev)
{
struct radeon_device *rdev = dev->dev_private;
uint32_t conn_info, entry, devices;
- uint16_t tmp;
+ uint16_t tmp, connector_object_id;
enum radeon_combios_ddc ddc_type;
enum radeon_combios_connector connector;
int i = 0;
break;
}
- radeon_apply_legacy_quirks(dev, i, &connector,
- &ddc_i2c);
+ if (!radeon_apply_legacy_quirks(dev, i, &connector,
+ &ddc_i2c))
+ continue;
switch (connector) {
case CONNECTOR_PROPRIETARY_LEGACY:
radeon_add_legacy_connector(dev, i, devices,
legacy_connector_convert
[connector],
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D);
break;
case CONNECTOR_CRT_LEGACY:
if (tmp & 0x1) {
devices,
legacy_connector_convert
[connector],
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
break;
case CONNECTOR_DVI_I_LEGACY:
devices = 0;
ATOM_DEVICE_DFP2_SUPPORT,
0),
ATOM_DEVICE_DFP2_SUPPORT);
+ connector_object_id = combios_check_dl_dvi(dev, 0);
} else {
devices |= ATOM_DEVICE_DFP1_SUPPORT;
radeon_add_legacy_encoder(dev,
ATOM_DEVICE_DFP1_SUPPORT,
0),
ATOM_DEVICE_DFP1_SUPPORT);
+ connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
}
radeon_add_legacy_connector(dev,
i,
devices,
legacy_connector_convert
[connector],
- &ddc_i2c);
+ &ddc_i2c,
+ connector_object_id);
break;
case CONNECTOR_DVI_D_LEGACY:
- if ((tmp >> 4) & 0x1)
+ if ((tmp >> 4) & 0x1) {
devices = ATOM_DEVICE_DFP2_SUPPORT;
- else
+ connector_object_id = combios_check_dl_dvi(dev, 1);
+ } else {
devices = ATOM_DEVICE_DFP1_SUPPORT;
+ connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I;
+ }
radeon_add_legacy_encoder(dev,
radeon_get_encoder_id
(dev, devices, 0),
radeon_add_legacy_connector(dev, i, devices,
legacy_connector_convert
[connector],
- &ddc_i2c);
+ &ddc_i2c,
+ connector_object_id);
break;
case CONNECTOR_CTV_LEGACY:
case CONNECTOR_STV_LEGACY:
ATOM_DEVICE_TV1_SUPPORT,
legacy_connector_convert
[connector],
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
break;
default:
DRM_ERROR("Unknown connector type: %d\n",
ATOM_DEVICE_CRT1_SUPPORT |
ATOM_DEVICE_DFP1_SUPPORT,
DRM_MODE_CONNECTOR_DVII,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I);
} else {
- DRM_DEBUG("No connector info found\n");
- return false;
+ uint16_t crt_info =
+ combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE);
+ DRM_DEBUG("Found CRT table, assuming VGA connector\n");
+ if (crt_info) {
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_id(dev,
+ ATOM_DEVICE_CRT1_SUPPORT,
+ 1),
+ ATOM_DEVICE_CRT1_SUPPORT);
+ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC);
+ radeon_add_legacy_connector(dev,
+ 0,
+ ATOM_DEVICE_CRT1_SUPPORT,
+ DRM_MODE_CONNECTOR_VGA,
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_VGA);
+ } else {
+ DRM_DEBUG("No connector info found\n");
+ return false;
+ }
}
}
5,
ATOM_DEVICE_LCD1_SUPPORT,
DRM_MODE_CONNECTOR_LVDS,
- &ddc_i2c);
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_LVDS);
}
}
combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE);
if (tv_info) {
if (RBIOS8(tv_info + 6) == 'T') {
- radeon_add_legacy_encoder(dev,
- radeon_get_encoder_id
- (dev,
- ATOM_DEVICE_TV1_SUPPORT,
- 2),
- ATOM_DEVICE_TV1_SUPPORT);
- radeon_add_legacy_connector(dev, 6,
- ATOM_DEVICE_TV1_SUPPORT,
- DRM_MODE_CONNECTOR_SVIDEO,
- &ddc_i2c);
+ if (radeon_apply_legacy_tv_quirks(dev)) {
+ radeon_add_legacy_encoder(dev,
+ radeon_get_encoder_id
+ (dev,
+ ATOM_DEVICE_TV1_SUPPORT,
+ 2),
+ ATOM_DEVICE_TV1_SUPPORT);
+ radeon_add_legacy_connector(dev, 6,
+ ATOM_DEVICE_TV1_SUPPORT,
+ DRM_MODE_CONNECTOR_SVIDEO,
+ &ddc_i2c,
+ CONNECTOR_OBJECT_ID_SVIDEO);
+ }
}
}
}
struct drm_device *dev = encoder->dev;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_display_mode *mode = NULL;
- struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
- if (native_mode->panel_xres != 0 &&
- native_mode->panel_yres != 0 &&
- native_mode->dotclock != 0) {
- mode = drm_mode_create(dev);
-
- mode->hdisplay = native_mode->panel_xres;
- mode->vdisplay = native_mode->panel_yres;
-
- mode->htotal = mode->hdisplay + native_mode->hblank;
- mode->hsync_start = mode->hdisplay + native_mode->hoverplus;
- mode->hsync_end = mode->hsync_start + native_mode->hsync_width;
- mode->vtotal = mode->vdisplay + native_mode->vblank;
- mode->vsync_start = mode->vdisplay + native_mode->voverplus;
- mode->vsync_end = mode->vsync_start + native_mode->vsync_width;
- mode->clock = native_mode->dotclock;
- mode->flags = 0;
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+ if (native_mode->hdisplay != 0 &&
+ native_mode->vdisplay != 0 &&
+ native_mode->clock != 0) {
+ mode = drm_mode_duplicate(dev, native_mode);
mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER;
drm_mode_set_name(mode);
struct drm_device *dev = encoder->dev;
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_display_mode *mode = NULL;
- struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
int i;
struct mode_size {
int w;
};
for (i = 0; i < 17; i++) {
+ if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+ if (common_modes[i].w > 1024 ||
+ common_modes[i].h > 768)
+ continue;
+ }
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
- if (common_modes[i].w > native_mode->panel_xres ||
- common_modes[i].h > native_mode->panel_yres ||
- (common_modes[i].w == native_mode->panel_xres &&
- common_modes[i].h == native_mode->panel_yres))
+ if (common_modes[i].w > native_mode->hdisplay ||
+ common_modes[i].h > native_mode->vdisplay ||
+ (common_modes[i].w == native_mode->hdisplay &&
+ common_modes[i].h == native_mode->vdisplay))
continue;
}
if (common_modes[i].w < 320 || common_modes[i].h < 200)
struct drm_connector *connector)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
- struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
/* Try to get native mode details from EDID if necessary */
- if (!native_mode->dotclock) {
+ if (!native_mode->clock) {
struct drm_display_mode *t, *mode;
list_for_each_entry_safe(mode, t, &connector->probed_modes, head) {
- if (mode->hdisplay == native_mode->panel_xres &&
- mode->vdisplay == native_mode->panel_yres) {
- native_mode->hblank = mode->htotal - mode->hdisplay;
- native_mode->hoverplus = mode->hsync_start - mode->hdisplay;
- native_mode->hsync_width = mode->hsync_end - mode->hsync_start;
- native_mode->vblank = mode->vtotal - mode->vdisplay;
- native_mode->voverplus = mode->vsync_start - mode->vdisplay;
- native_mode->vsync_width = mode->vsync_end - mode->vsync_start;
- native_mode->dotclock = mode->clock;
+ if (mode->hdisplay == native_mode->hdisplay &&
+ mode->vdisplay == native_mode->vdisplay) {
+ *native_mode = *mode;
+ drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V);
DRM_INFO("Determined LVDS native mode details from EDID\n");
break;
}
}
}
- if (!native_mode->dotclock) {
+ if (!native_mode->clock) {
DRM_INFO("No LVDS native mode details, disabling RMX\n");
radeon_encoder->rmx_type = RMX_OFF;
}
static int radeon_lvds_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+
+ if ((mode->hdisplay < 320) || (mode->vdisplay < 240))
+ return MODE_PANEL;
+
+ if (encoder) {
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+
+ /* AVIVO hardware supports downscaling modes larger than the panel
+ * to the panel size, but I'm not sure this is desirable.
+ */
+ if ((mode->hdisplay > native_mode->hdisplay) ||
+ (mode->vdisplay > native_mode->vdisplay))
+ return MODE_PANEL;
+
+ /* if scaling is disabled, block non-native modes */
+ if (radeon_encoder->rmx_type == RMX_OFF) {
+ if ((mode->hdisplay != native_mode->hdisplay) ||
+ (mode->vdisplay != native_mode->vdisplay))
+ return MODE_PANEL;
+ }
+ }
+
return MODE_OK;
}
static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector)
{
- enum drm_connector_status ret = connector_status_connected;
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ struct drm_encoder *encoder = radeon_best_single_encoder(connector);
+ enum drm_connector_status ret = connector_status_disconnected;
+
+ if (encoder) {
+ struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+
+ /* check if panel is valid */
+ if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240)
+ ret = connector_status_connected;
+
+ }
+
+ /* check for edid as well */
+ if (radeon_connector->edid)
+ ret = connector_status_connected;
+ else {
+ if (radeon_connector->ddc_bus) {
+ radeon_i2c_do_lock(radeon_connector, 1);
+ radeon_connector->edid = drm_get_edid(&radeon_connector->base,
+ &radeon_connector->ddc_bus->adapter);
+ radeon_i2c_do_lock(radeon_connector, 0);
+ if (radeon_connector->edid)
+ ret = connector_status_connected;
+ }
+ }
/* check acpi lid status ??? */
+
radeon_connector_update_scratch_regs(connector, ret);
return ret;
}
if (radeon_connector->ddc_bus)
radeon_i2c_destroy(radeon_connector->ddc_bus);
+ if (radeon_connector->edid)
+ kfree(radeon_connector->edid);
kfree(radeon_connector->con_priv);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
static int radeon_vga_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ /* XXX check mode bandwidth */
+ /* XXX verify against max DAC output frequency */
return MODE_OK;
}
radeon_i2c_do_lock(radeon_connector, 1);
dret = radeon_ddc_probe(radeon_connector);
radeon_i2c_do_lock(radeon_connector, 0);
- if (dret)
- ret = connector_status_connected;
- else {
+ if (dret) {
+ if (radeon_connector->edid) {
+ kfree(radeon_connector->edid);
+ radeon_connector->edid = NULL;
+ }
+ radeon_i2c_do_lock(radeon_connector, 1);
+ radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter);
+ radeon_i2c_do_lock(radeon_connector, 0);
+
+ if (!radeon_connector->edid) {
+ DRM_ERROR("DDC responded but not EDID found for %s\n",
+ drm_get_connector_name(connector));
+ } else {
+ radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
+
+ /* some oems have boards with separate digital and analog connectors
+ * with a shared ddc line (often vga + hdmi)
+ */
+ if (radeon_connector->use_digital && radeon_connector->shared_ddc) {
+ kfree(radeon_connector->edid);
+ radeon_connector->edid = NULL;
+ ret = connector_status_disconnected;
+ } else
+ ret = connector_status_connected;
+ }
+ } else {
if (radeon_connector->dac_load_detect) {
encoder_funcs = encoder->helper_private;
ret = encoder_funcs->detect(encoder, connector);
static int radeon_tv_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ if ((mode->hdisplay > 1024) || (mode->vdisplay > 768))
+ return MODE_CLOCK_RANGE;
return MODE_OK;
}
dret = radeon_ddc_probe(radeon_connector);
radeon_i2c_do_lock(radeon_connector, 0);
if (dret) {
+ if (radeon_connector->edid) {
+ kfree(radeon_connector->edid);
+ radeon_connector->edid = NULL;
+ }
radeon_i2c_do_lock(radeon_connector, 1);
radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter);
radeon_i2c_do_lock(radeon_connector, 0);
} else {
radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL);
- /* if this isn't a digital monitor
- then we need to make sure we don't have any
- TV conflicts */
- ret = connector_status_connected;
+ /* some oems have boards with separate digital and analog connectors
+ * with a shared ddc line (often vga + hdmi)
+ */
+ if ((!radeon_connector->use_digital) && radeon_connector->shared_ddc) {
+ kfree(radeon_connector->edid);
+ radeon_connector->edid = NULL;
+ ret = connector_status_disconnected;
+ } else
+ ret = connector_status_connected;
}
}
radeon_connector->use_digital = true;
}
+static int radeon_dvi_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+
+ /* XXX check mode bandwidth */
+
+ if (radeon_connector->use_digital && (mode->clock > 165000)) {
+ if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) ||
+ (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) ||
+ (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
+ return MODE_OK;
+ else
+ return MODE_CLOCK_HIGH;
+ }
+ return MODE_OK;
+}
+
struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = {
.get_modes = radeon_dvi_get_modes,
- .mode_valid = radeon_vga_mode_valid,
+ .mode_valid = radeon_dvi_mode_valid,
.best_encoder = radeon_dvi_encoder,
};
int connector_type,
struct radeon_i2c_bus_rec *i2c_bus,
bool linkb,
- uint32_t igp_lane_info)
+ uint32_t igp_lane_info,
+ uint16_t connector_object_id)
{
struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *radeon_dig_connector;
uint32_t subpixel_order = SubPixelNone;
+ bool shared_ddc = false;
int ret;
/* fixme - tv/cv/din */
radeon_connector->devices |= supported_device;
return;
}
+ if (radeon_connector->ddc_bus && i2c_bus->valid) {
+ if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus,
+ sizeof(struct radeon_i2c_bus_rec)) == 0) {
+ radeon_connector->shared_ddc = true;
+ shared_ddc = true;
+ }
+ }
}
radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL);
radeon_connector->connector_id = connector_id;
radeon_connector->devices = supported_device;
+ radeon_connector->shared_ddc = shared_ddc;
+ radeon_connector->connector_object_id = connector_object_id;
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
uint32_t connector_id,
uint32_t supported_device,
int connector_type,
- struct radeon_i2c_bus_rec *i2c_bus)
+ struct radeon_i2c_bus_rec *i2c_bus,
+ uint16_t connector_object_id)
{
struct radeon_device *rdev = dev->dev_private;
struct drm_connector *connector;
radeon_connector->connector_id = connector_id;
radeon_connector->devices = supported_device;
+ radeon_connector->connector_object_id = connector_object_id;
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
struct radeon_device *rdev = crtc->dev->dev_private;
- if (ASIC_IS_AVIVO(rdev))
+ if (ASIC_IS_AVIVO(rdev)) {
+ if (rdev->family >= CHIP_RV770) {
+ if (radeon_crtc->crtc_id)
+ WREG32(R700_D2CUR_SURFACE_ADDRESS_HIGH, 0);
+ else
+ WREG32(R700_D1CUR_SURFACE_ADDRESS_HIGH, 0);
+ }
WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
- else {
+ } else {
radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr;
/* offset is from DISP(2)_BASE_ADDRESS */
WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset);
return r;
}
-static struct card_info atom_card_info = {
- .dev = NULL,
- .reg_read = cail_reg_read,
- .reg_write = cail_reg_write,
- .mc_read = cail_mc_read,
- .mc_write = cail_mc_write,
- .pll_read = cail_pll_read,
- .pll_write = cail_pll_write,
-};
-
int radeon_atombios_init(struct radeon_device *rdev)
{
- atom_card_info.dev = rdev->ddev;
- rdev->mode_info.atom_context = atom_parse(&atom_card_info, rdev->bios);
+ struct card_info *atom_card_info =
+ kzalloc(sizeof(struct card_info), GFP_KERNEL);
+
+ if (!atom_card_info)
+ return -ENOMEM;
+
+ rdev->mode_info.atom_card_info = atom_card_info;
+ atom_card_info->dev = rdev->ddev;
+ atom_card_info->reg_read = cail_reg_read;
+ atom_card_info->reg_write = cail_reg_write;
+ atom_card_info->mc_read = cail_mc_read;
+ atom_card_info->mc_write = cail_mc_write;
+ atom_card_info->pll_read = cail_pll_read;
+ atom_card_info->pll_write = cail_pll_write;
+
+ rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios);
radeon_atom_initialize_bios_scratch_regs(rdev->ddev);
return 0;
}
void radeon_atombios_fini(struct radeon_device *rdev)
{
kfree(rdev->mode_info.atom_context);
+ kfree(rdev->mode_info.atom_card_info);
}
int radeon_combios_init(struct radeon_device *rdev)
if (size != 256) {
return;
}
- if (crtc->fb == NULL) {
- return;
- }
/* userspace palettes are always correct as is */
for (i = 0; i < 256; i++) {
radeon_crtc->lut_g[i] = green[i] >> 6;
radeon_crtc->lut_b[i] = blue[i] >> 6;
}
-
radeon_crtc_load_lut(crtc);
}
int radeon_ddc_get_modes(struct radeon_connector *radeon_connector)
{
- struct edid *edid;
int ret = 0;
if (!radeon_connector->ddc_bus)
return -1;
if (!radeon_connector->edid) {
radeon_i2c_do_lock(radeon_connector, 1);
- edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter);
+ radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter);
radeon_i2c_do_lock(radeon_connector, 0);
- } else
- edid = radeon_connector->edid;
+ }
- if (edid) {
- /* update digital bits here */
- if (edid->input & DRM_EDID_INPUT_DIGITAL)
- radeon_connector->use_digital = 1;
- else
- radeon_connector->use_digital = 0;
- drm_mode_connector_update_edid_property(&radeon_connector->base, edid);
- ret = drm_add_edid_modes(&radeon_connector->base, edid);
- kfree(edid);
+ if (radeon_connector->edid) {
+ drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid);
+ ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid);
return ret;
}
drm_mode_connector_update_edid_property(&radeon_connector->base, NULL);
radeon_crtc->rmx_type = radeon_encoder->rmx_type;
memcpy(&radeon_crtc->native_mode,
&radeon_encoder->native_mode,
- sizeof(struct radeon_native_mode));
+ sizeof(struct drm_display_mode));
first = false;
} else {
if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
if (radeon_crtc->rmx_type != RMX_OFF) {
fixed20_12 a, b;
a.full = rfixed_const(crtc->mode.vdisplay);
- b.full = rfixed_const(radeon_crtc->native_mode.panel_xres);
+ b.full = rfixed_const(radeon_crtc->native_mode.hdisplay);
radeon_crtc->vsc.full = rfixed_div(a, b);
a.full = rfixed_const(crtc->mode.hdisplay);
- b.full = rfixed_const(radeon_crtc->native_mode.panel_yres);
+ b.full = rfixed_const(radeon_crtc->native_mode.vdisplay);
radeon_crtc->hsc.full = rfixed_div(a, b);
} else {
radeon_crtc->vsc.full = rfixed_const(1);
extern int atom_debug;
+/* evil but including atombios.h is much worse */
+bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index,
+ struct drm_display_mode *mode);
+
uint32_t
radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t dac)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
- struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
- if (mode->hdisplay < native_mode->panel_xres ||
- mode->vdisplay < native_mode->panel_yres) {
- if (ASIC_IS_AVIVO(rdev)) {
- adjusted_mode->hdisplay = native_mode->panel_xres;
- adjusted_mode->vdisplay = native_mode->panel_yres;
- adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank;
- adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus;
- adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width;
- adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank;
- adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus;
- adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width;
- /* update crtc values */
- drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
- /* adjust crtc values */
- adjusted_mode->crtc_hdisplay = native_mode->panel_xres;
- adjusted_mode->crtc_vdisplay = native_mode->panel_yres;
- adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank;
- adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus;
- adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width;
- adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank;
- adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus;
- adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width;
- } else {
- adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank;
- adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus;
- adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width;
- adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank;
- adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus;
- adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width;
- /* update crtc values */
- drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
- /* adjust crtc values */
- adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank;
- adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus;
- adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width;
- adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank;
- adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus;
- adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width;
+ struct drm_display_mode *native_mode = &radeon_encoder->native_mode;
+
+ if (mode->hdisplay < native_mode->hdisplay ||
+ mode->vdisplay < native_mode->vdisplay) {
+ int mode_id = adjusted_mode->base.id;
+ *adjusted_mode = *native_mode;
+ if (!ASIC_IS_AVIVO(rdev)) {
+ adjusted_mode->hdisplay = mode->hdisplay;
+ adjusted_mode->vdisplay = mode->vdisplay;
}
- adjusted_mode->flags = native_mode->flags;
- adjusted_mode->clock = native_mode->dotclock;
+ adjusted_mode->base.id = mode_id;
}
}
struct drm_display_mode *adjusted_mode)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ struct drm_device *dev = encoder->dev;
+ struct radeon_device *rdev = dev->dev_private;
+ /* set the active encoder to connector routing */
+ radeon_encoder_set_active_device(encoder);
drm_mode_set_crtcinfo(adjusted_mode, 0);
if (radeon_encoder->rmx_type != RMX_OFF)
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) {
+ struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv;
+ if (tv_dac) {
+ if (tv_dac->tv_std == TV_STD_NTSC ||
+ tv_dac->tv_std == TV_STD_NTSC_J ||
+ tv_dac->tv_std == TV_STD_PAL_M)
+ radeon_atom_get_tv_timings(rdev, 0, adjusted_mode);
+ else
+ radeon_atom_get_tv_timings(rdev, 1, adjusted_mode);
+ }
+ }
+
return true;
}
case 1:
args.v1.ucMisc = 0;
args.v1.ucAction = action;
- if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+ if (drm_detect_hdmi_monitor(radeon_connector->edid))
args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
if (dig->coherent_mode)
args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT;
}
- if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+ if (drm_detect_hdmi_monitor(radeon_connector->edid))
args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE;
args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
args.v2.ucTruncate = 0;
switch (connector->connector_type) {
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */
- if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+ if (drm_detect_hdmi_monitor(radeon_connector->edid))
return ATOM_ENCODER_MODE_HDMI;
else if (radeon_connector->use_digital)
return ATOM_ENCODER_MODE_DVI;
case DRM_MODE_CONNECTOR_DVID:
case DRM_MODE_CONNECTOR_HDMIA:
default:
- if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+ if (drm_detect_hdmi_monitor(radeon_connector->edid))
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
/*if (radeon_output->MonType == MT_DP)
return ATOM_ENCODER_MODE_DP;
else*/
- if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr))
+ if (drm_detect_hdmi_monitor(radeon_connector->edid))
return ATOM_ENCODER_MODE_HDMI;
else
return ATOM_ENCODER_MODE_DVI;
atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev);
args.v1.ucAction = action;
-
+ if (action == ATOM_TRANSMITTER_ACTION_INIT) {
+ args.v1.usInitInfo = radeon_connector->connector_object_id;
+ } else {
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
+ else
+ args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+ }
if (ASIC_IS_DCE32(rdev)) {
- if (radeon_encoder->pixel_clock > 165000) {
- args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 2) / 100);
- args.v2.acConfig.fDualLinkConnector = 1;
- } else {
- args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 4) / 100);
- }
+ if (radeon_encoder->pixel_clock > 165000)
+ args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10);
if (dig->dig_block)
args.v2.acConfig.ucEncoderSel = 1;
}
} else {
args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL;
- args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock) / 10);
switch (radeon_encoder->encoder_id) {
case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
int index = 0;
bool is_dig = false;
- int devices;
memset(&args, 0, sizeof(args));
- /* on DPMS off we have no idea if active device is meaningful */
- if (mode != DRM_MODE_DPMS_ON && !radeon_encoder->active_device)
- devices = radeon_encoder->devices;
- else
- devices = radeon_encoder->active_device;
-
DRM_DEBUG("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n",
radeon_encoder->encoder_id, mode, radeon_encoder->devices,
radeon_encoder->active_device);
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC1:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
- if (devices & (ATOM_DEVICE_TV_SUPPORT))
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
- else if (devices & (ATOM_DEVICE_CV_SUPPORT))
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
else
index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl);
break;
case ENCODER_OBJECT_ID_INTERNAL_DAC2:
case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
- if (devices & (ATOM_DEVICE_TV_SUPPORT))
+ if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))
index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl);
- else if (devices & (ATOM_DEVICE_CV_SUPPORT))
+ else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT))
index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl);
else
index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl);
}
/* set scaler clears this on some chips */
- if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE))
- WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, AVIVO_D1MODE_INTERLEAVE_EN);
+ if (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))) {
+ if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE))
+ WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset,
+ AVIVO_D1MODE_INTERLEAVE_EN);
+ }
}
static void
/* setup and enable the encoder and transmitter */
atombios_dig_encoder_setup(encoder, ATOM_ENABLE);
+ atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT);
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP);
atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE);
break;
{
radeon_atom_output_lock(encoder, true);
radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
-
- radeon_encoder_set_active_device(encoder);
}
static void radeon_atom_encoder_commit(struct drm_encoder *encoder)
WARN(1, "trying to unbind memory to unitialized GART !\n");
return;
}
- t = offset / 4096;
- p = t / (PAGE_SIZE / 4096);
+ t = offset / RADEON_GPU_PAGE_SIZE;
+ p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE);
for (i = 0; i < pages; i++, p++) {
if (rdev->gart.pages[p]) {
pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p],
PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
rdev->gart.pages[p] = NULL;
rdev->gart.pages_addr[p] = 0;
- for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
+ for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
radeon_gart_set_page(rdev, t, 0);
}
}
DRM_ERROR("trying to bind memory to unitialized GART !\n");
return -EINVAL;
}
- t = offset / 4096;
- p = t / (PAGE_SIZE / 4096);
+ t = offset / RADEON_GPU_PAGE_SIZE;
+ p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE);
for (i = 0; i < pages; i++, p++) {
/* we need to support large memory configurations */
}
rdev->gart.pages[p] = pagelist[i];
page_base = rdev->gart.pages_addr[p];
- for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
+ for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) {
radeon_gart_set_page(rdev, t, page_base);
- page_base += 4096;
+ page_base += RADEON_GPU_PAGE_SIZE;
}
}
mb();
if (rdev->gart.pages) {
return 0;
}
- /* We need PAGE_SIZE >= 4096 */
- if (PAGE_SIZE < 4096) {
+ /* We need PAGE_SIZE >= RADEON_GPU_PAGE_SIZE */
+ if (PAGE_SIZE < RADEON_GPU_PAGE_SIZE) {
DRM_ERROR("Page size is smaller than GPU page size!\n");
return -EINVAL;
}
/* Compute table size */
rdev->gart.num_cpu_pages = rdev->mc.gtt_size / PAGE_SIZE;
- rdev->gart.num_gpu_pages = rdev->mc.gtt_size / 4096;
+ rdev->gart.num_gpu_pages = rdev->mc.gtt_size / RADEON_GPU_PAGE_SIZE;
DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n",
rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages);
/* Allocate pages table */
if (r) {
return r;
}
+ /* enable msi */
+ rdev->msi_enabled = 0;
+ if (rdev->family >= CHIP_RV380) {
+ int ret = pci_enable_msi(rdev->pdev);
+ if (!ret)
+ rdev->msi_enabled = 1;
+ }
drm_irq_install(rdev->ddev);
rdev->irq.installed = true;
DRM_INFO("radeon: irq initialized.\n");
if (rdev->irq.installed) {
rdev->irq.installed = false;
drm_irq_uninstall(rdev->ddev);
+ if (rdev->msi_enabled)
+ pci_disable_msi(rdev->pdev);
}
}
u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active;
u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp;
u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp;
- struct radeon_native_mode *native_mode = &radeon_crtc->native_mode;
+ struct drm_display_mode *native_mode = &radeon_crtc->native_mode;
fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
(RADEON_VERT_STRETCH_RESERVED |
fp_horz_vert_active = 0;
- if (native_mode->panel_xres == 0 ||
- native_mode->panel_yres == 0) {
+ if (native_mode->hdisplay == 0 ||
+ native_mode->vdisplay == 0) {
hscale = false;
vscale = false;
} else {
- if (xres > native_mode->panel_xres)
- xres = native_mode->panel_xres;
- if (yres > native_mode->panel_yres)
- yres = native_mode->panel_yres;
+ if (xres > native_mode->hdisplay)
+ xres = native_mode->hdisplay;
+ if (yres > native_mode->vdisplay)
+ yres = native_mode->vdisplay;
- if (xres == native_mode->panel_xres)
+ if (xres == native_mode->hdisplay)
hscale = false;
- if (yres == native_mode->panel_yres)
+ if (yres == native_mode->vdisplay)
vscale = false;
}
else {
inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
- / native_mode->panel_xres + 1;
+ / native_mode->hdisplay + 1;
fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
RADEON_HORZ_STRETCH_BLEND |
RADEON_HORZ_STRETCH_ENABLE |
- ((native_mode->panel_xres/8-1) << 16));
+ ((native_mode->hdisplay/8-1) << 16));
}
if (!vscale)
else {
inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
- / native_mode->panel_yres + 1;
+ / native_mode->vdisplay + 1;
fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
RADEON_VERT_STRETCH_ENABLE |
RADEON_VERT_STRETCH_BLEND |
- ((native_mode->panel_yres-1) << 12));
+ ((native_mode->vdisplay-1) << 12));
}
break;
case RMX_CENTER:
? RADEON_CRTC_V_SYNC_POL
: 0)));
- fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
- (((native_mode->panel_xres / 8) & 0x1ff) << 16));
+ fp_horz_vert_active = (((native_mode->vdisplay) & 0xfff) |
+ (((native_mode->hdisplay / 8) & 0x1ff) << 16));
break;
case RMX_OFF:
default:
radeon_fb = to_radeon_framebuffer(old_fb);
radeon_gem_object_unpin(radeon_fb->obj);
}
+
+ /* Bytes per pixel may have changed */
+ radeon_bandwidth_update(rdev);
+
return 0;
}
WREG32(RADEON_DISP2_MERGE_CNTL, disp2_merge_cntl);
WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl);
+
+ WREG32(RADEON_FP_H2_SYNC_STRT_WID, crtc_h_sync_strt_wid);
+ WREG32(RADEON_FP_V2_SYNC_STRT_WID, crtc_v_sync_strt_wid);
} else {
uint32_t crtc_gen_cntl;
uint32_t crtc_ext_cntl;
int x, int y, struct drm_framebuffer *old_fb)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- struct drm_device *dev = crtc->dev;
- struct radeon_device *rdev = dev->dev_private;
/* TODO TV */
radeon_crtc_set_base(crtc, x, y, old_fb);
radeon_set_crtc_timing(crtc, adjusted_mode);
radeon_set_pll(crtc, adjusted_mode);
- radeon_bandwidth_update(rdev);
if (radeon_crtc->crtc_id == 0) {
radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode);
} else {
else
radeon_combios_output_lock(encoder, true);
radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_OFF);
-
- radeon_encoder_set_active_device(encoder);
}
static void radeon_legacy_lvds_commit(struct drm_encoder *encoder)
{
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+ /* set the active encoder to connector routing */
+ radeon_encoder_set_active_device(encoder);
drm_mode_set_crtcinfo(adjusted_mode, 0);
if (radeon_encoder->rmx_type != RMX_OFF)
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
-
+ /* set the active encoder to connector routing */
+ radeon_encoder_set_active_device(encoder);
drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
else
radeon_combios_output_lock(encoder, true);
radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_OFF);
- radeon_encoder_set_active_device(encoder);
}
static void radeon_legacy_primary_dac_commit(struct drm_encoder *encoder)
else
radeon_combios_output_lock(encoder, true);
radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_OFF);
- radeon_encoder_set_active_device(encoder);
}
static void radeon_legacy_tmds_int_commit(struct drm_encoder *encoder)
fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN);
+ fp_gen_cntl &= ~(RADEON_FP_RMX_HVSYNC_CONTROL_EN |
+ RADEON_FP_DFP_SYNC_SEL |
+ RADEON_FP_CRT_SYNC_SEL |
+ RADEON_FP_CRTC_LOCK_8DOT |
+ RADEON_FP_USE_SHADOW_EN |
+ RADEON_FP_CRTC_USE_SHADOW_VEND |
+ RADEON_FP_CRT_SYNC_ALT);
+
if (1) /* FIXME rgbBits == 8 */
fp_gen_cntl |= RADEON_FP_PANEL_FORMAT; /* 24 bit format */
else
else
fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
} else
- fp_gen_cntl |= RADEON_FP_SEL_CRTC1;
+ fp_gen_cntl &= ~RADEON_FP_SEL_CRTC2;
} else {
if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
-
+ /* set the active encoder to connector routing */
+ radeon_encoder_set_active_device(encoder);
drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
else
radeon_combios_output_lock(encoder, true);
radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_OFF);
- radeon_encoder_set_active_device(encoder);
}
static void radeon_legacy_tmds_ext_commit(struct drm_encoder *encoder)
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
-
+ /* set the active encoder to connector routing */
+ radeon_encoder_set_active_device(encoder);
drm_mode_set_crtcinfo(adjusted_mode, 0);
return true;
else
radeon_combios_output_lock(encoder, true);
radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_OFF);
- radeon_encoder_set_active_device(encoder);
}
static void radeon_legacy_tv_dac_commit(struct drm_encoder *encoder)
struct radeon_mode_info {
struct atom_context *atom_context;
+ struct card_info *atom_card_info;
enum radeon_connector_table connector_table;
bool mode_config_initialized;
struct radeon_crtc *crtcs[2];
};
-struct radeon_native_mode {
- /* preferred mode */
- uint32_t panel_xres, panel_yres;
- uint32_t hoverplus, hsync_width;
- uint32_t hblank;
- uint32_t voverplus, vsync_width;
- uint32_t vblank;
- uint32_t dotclock;
- uint32_t flags;
-};
-
#define MAX_H_CODE_TIMING_LEN 32
#define MAX_V_CODE_TIMING_LEN 32
enum radeon_rmx_type rmx_type;
fixed20_12 vsc;
fixed20_12 hsc;
- struct radeon_native_mode native_mode;
+ struct drm_display_mode native_mode;
};
struct radeon_encoder_primary_dac {
bool use_bios_dividers;
uint32_t lvds_gen_cntl;
/* panel mode */
- struct radeon_native_mode native_mode;
+ struct drm_display_mode native_mode;
};
struct radeon_encoder_tv_dac {
struct radeon_tmds_pll tmds_pll[4];
};
+/* spread spectrum */
+struct radeon_atom_ss {
+ uint16_t percentage;
+ uint8_t type;
+ uint8_t step;
+ uint8_t delay;
+ uint8_t range;
+ uint8_t refdiv;
+};
+
struct radeon_encoder_atom_dig {
/* atom dig */
bool coherent_mode;
/* atom lvds */
uint32_t lvds_misc;
uint16_t panel_pwr_delay;
+ struct radeon_atom_ss *ss;
/* panel mode */
- struct radeon_native_mode native_mode;
+ struct drm_display_mode native_mode;
};
struct radeon_encoder_atom_dac {
uint32_t flags;
uint32_t pixel_clock;
enum radeon_rmx_type rmx_type;
- struct radeon_native_mode native_mode;
+ struct drm_display_mode native_mode;
void *enc_priv;
};
uint32_t connector_id;
uint32_t devices;
struct radeon_i2c_chan *ddc_bus;
+ /* some systems have a an hdmi and vga port with a shared ddc line */
+ bool shared_ddc;
bool use_digital;
/* we need to mind the EDID between detect
and get modes due to analog/digital/tvencoder */
struct edid *edid;
void *con_priv;
bool dac_load_detect;
+ uint16_t connector_object_id;
};
struct radeon_framebuffer {
--- /dev/null
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Rafał Miłecki <zajec5@gmail.com>
+ */
+#include "drmP.h"
+#include "radeon.h"
+
+int radeon_debugfs_pm_init(struct radeon_device *rdev);
+
+int radeon_pm_init(struct radeon_device *rdev)
+{
+ if (radeon_debugfs_pm_init(rdev)) {
+ DRM_ERROR("Failed to register debugfs file for CP !\n");
+ }
+
+ return 0;
+}
+
+/*
+ * Debugfs info
+ */
+#if defined(CONFIG_DEBUG_FS)
+
+static int radeon_debugfs_pm_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct radeon_device *rdev = dev->dev_private;
+
+ seq_printf(m, "engine clock: %u0 Hz\n", radeon_get_engine_clock(rdev));
+ seq_printf(m, "memory clock: %u0 Hz\n", radeon_get_memory_clock(rdev));
+
+ return 0;
+}
+
+static struct drm_info_list radeon_pm_info_list[] = {
+ {"radeon_pm_info", radeon_debugfs_pm_info, 0, NULL},
+};
+#endif
+
+int radeon_debugfs_pm_init(struct radeon_device *rdev)
+{
+#if defined(CONFIG_DEBUG_FS)
+ return radeon_debugfs_add_files(rdev, radeon_pm_info_list, ARRAY_SIZE(radeon_pm_info_list));
+#else
+ return 0;
+#endif
+}
#define RADEON_BUS_CNTL 0x0030
# define RADEON_BUS_MASTER_DIS (1 << 6)
# define RADEON_BUS_BIOS_DIS_ROM (1 << 12)
+# define RS600_BUS_MASTER_DIS (1 << 14)
+# define RS600_MSI_REARM (1 << 20) /* rs600/rs690/rs740 */
# define RADEON_BUS_RD_DISCARD_EN (1 << 24)
# define RADEON_BUS_RD_ABORT_EN (1 << 25)
# define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28)
# define RADEON_BUS_READ_BURST (1 << 30)
#define RADEON_BUS_CNTL1 0x0034
# define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4)
+/* rv370/rv380, rv410, r423/r430/r480, r5xx */
+#define RADEON_MSI_REARM_EN 0x0160
+# define RV370_MSI_REARM_EN (1 << 0)
/* #define RADEON_PCIE_INDEX 0x0030 */
/* #define RADEON_PCIE_DATA 0x0034 */
#define RADEON_AIC_CNTL 0x01d0
# define RADEON_PCIGART_TRANSLATE_EN (1 << 0)
# define RADEON_DIS_OUT_OF_PCI_GART_ACCESS (1 << 1)
+# define RS400_MSI_REARM (1 << 3) /* rs400/rs480 */
#define RADEON_AIC_LO_ADDR 0x01dc
#define RADEON_AIC_PT_BASE 0x01d8
#define RADEON_AIC_HI_ADDR 0x01e0
/* Number of tests =
* (Total GTT - IB pool - writeback page - ring buffer) / test size
*/
- n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 -
+ n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE -
rdev->cp.ring_size) / size;
gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
goto out_cleanup;
}
- r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence);
+ r = radeon_copy(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, fence);
if (r) {
DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
goto out_cleanup;
goto out_cleanup;
}
- r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence);
+ r = radeon_copy(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, fence);
if (r) {
DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
goto out_cleanup;
if (unlikely(r)) {
return r;
}
+
+ r = ttm_tt_set_placement_caching(bo->ttm, tmp_mem.placement);
+ if (unlikely(r)) {
+ goto out_cleanup;
+ }
+
r = ttm_tt_bind(bo->ttm, &tmp_mem);
if (unlikely(r)) {
goto out_cleanup;
rs400_gart_disable(rdev);
/* Resume clock before doing reset */
r300_clock_startup(rdev);
+ /* setup MC before calling post tables */
+ rs400_mc_program(rdev);
/* Reset gpu before posting otherwise ATOM will enter infinite loop */
if (radeon_gpu_reset(rdev)) {
dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
int rs600_irq_process(struct radeon_device *rdev)
{
- uint32_t status;
+ uint32_t status, msi_rearm;
uint32_t r500_disp_int;
status = rs600_irq_ack(rdev, &r500_disp_int);
drm_handle_vblank(rdev->ddev, 1);
status = rs600_irq_ack(rdev, &r500_disp_int);
}
+ if (rdev->msi_enabled) {
+ switch (rdev->family) {
+ case CHIP_RS600:
+ case CHIP_RS690:
+ case CHIP_RS740:
+ msi_rearm = RREG32(RADEON_BUS_CNTL) & ~RS600_MSI_REARM;
+ WREG32(RADEON_BUS_CNTL, msi_rearm);
+ WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM);
+ break;
+ default:
+ msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN;
+ WREG32(RADEON_MSI_REARM_EN, msi_rearm);
+ WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN);
+ break;
+ }
+ }
return IRQ_HANDLED;
}
}
/* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Get vram informations */
rs600_vram_info(rdev);
/* Initialize memory controller (also test AGP) */
}
/* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Get vram informations */
rs690_vram_info(rdev);
/* Initialize memory controller (also test AGP) */
void rv515_vga_render_disable(struct radeon_device *rdev)
{
+ WREG32(R_000330_D1VGA_CONTROL, 0);
+ WREG32(R_000338_D2VGA_CONTROL, 0);
WREG32(R_000300_VGA_RENDER_CONTROL,
RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL);
}
}
/* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Get vram informations */
rv515_vram_info(rdev);
/* Initialize memory controller (also test AGP) */
if (rdev->family == CHIP_RV770)
gb_tiling_config |= BANK_TILING(1);
else
- gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_SHIFT) >> NOOFBANK_MASK);
+ gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT);
gb_tiling_config |= GROUP_SIZE(0);
- if (((mc_arb_ramcfg & NOOFROWS_MASK) & NOOFROWS_SHIFT) > 3) {
+ if (((mc_arb_ramcfg & NOOFROWS_MASK) >> NOOFROWS_SHIFT) > 3) {
gb_tiling_config |= ROW_TILING(3);
gb_tiling_config |= SAMPLE_SPLIT(3);
} else {
/* set HW defaults for 3D engine */
WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) |
- ROQ_IB2_START(0x2b)));
+ ROQ_IB2_START(0x2b)));
WREG32(CP_MEQ_THRESHOLDS, STQ_SPLIT(0x30));
WREG32(TA_CNTL_AUX, (DISABLE_CUBE_ANISO |
- SYNC_GRADIENT |
- SYNC_WALKER |
- SYNC_ALIGNER));
+ SYNC_GRADIENT |
+ SYNC_WALKER |
+ SYNC_ALIGNER));
sx_debug_1 = RREG32(SX_DEBUG_1);
sx_debug_1 |= ENABLE_NEW_SMX_ADDRESS;
WREG32(SMX_DC_CTL0, smx_dc_ctl0);
WREG32(SMX_EVENT_CTL, (ES_FLUSH_CTL(4) |
- GS_FLUSH_CTL(4) |
- ACK_FLUSH_CTL(3) |
- SYNC_FLUSH_CTL));
+ GS_FLUSH_CTL(4) |
+ ACK_FLUSH_CTL(3) |
+ SYNC_FLUSH_CTL));
if (rdev->family == CHIP_RV770)
WREG32(DB_DEBUG3, DB_CLK_OFF_DELAY(0x1f));
}
WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.rv770.sx_max_export_size / 4) - 1) |
- POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) |
- SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1)));
+ POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) |
+ SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1)));
WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.rv770.sc_prim_fifo_size) |
- SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) |
- SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize)));
+ SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) |
+ SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize)));
WREG32(PA_SC_MULTI_CHIP_CNTL, 0);
{
fixed20_12 a;
u32 tmp;
+ int chansize, numchan;
int r;
/* Get VRAM informations */
- /* FIXME: Don't know how to determine vram width, need to check
- * vram_width usage
- */
- rdev->mc.vram_width = 128;
rdev->mc.vram_is_ddr = true;
+ tmp = RREG32(MC_ARB_RAMCFG);
+ if (tmp & CHANSIZE_OVERRIDE) {
+ chansize = 16;
+ } else if (tmp & CHANSIZE_MASK) {
+ chansize = 64;
+ } else {
+ chansize = 32;
+ }
+ tmp = RREG32(MC_SHARED_CHMAP);
+ switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
+ case 0:
+ default:
+ numchan = 1;
+ break;
+ case 1:
+ numchan = 2;
+ break;
+ case 2:
+ numchan = 4;
+ break;
+ case 3:
+ numchan = 8;
+ break;
+ }
+ rdev->mc.vram_width = numchan * chansize;
/* Could aper size report 0 ? */
rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
r600_scratch_init(rdev);
/* Initialize surface registers */
radeon_surface_init(rdev);
+ /* Initialize clocks */
radeon_get_clock_info(rdev->ddev);
r = radeon_clocks_init(rdev);
if (r)
return r;
+ /* Initialize power management */
+ radeon_pm_init(rdev);
/* Fence driver */
r = radeon_fence_driver_init(rdev);
if (r)
#define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0
#define HDP_TILING_CONFIG 0x2F3C
+#define MC_SHARED_CHMAP 0x2004
+#define NOOFCHAN_SHIFT 12
+#define NOOFCHAN_MASK 0x00003000
+
#define MC_ARB_RAMCFG 0x2760
#define NOOFBANK_SHIFT 0
#define NOOFBANK_MASK 0x00000003
#define CHANSIZE_MASK 0x00000100
#define BURSTLENGTH_SHIFT 9
#define BURSTLENGTH_MASK 0x00000200
+#define CHANSIZE_OVERRIDE (1 << 11)
#define MC_VM_AGP_TOP 0x2028
#define MC_VM_AGP_BOT 0x202C
#define MC_VM_AGP_BASE 0x2030
return ttm_tt_set_caching(ttm, state);
}
+EXPORT_SYMBOL(ttm_tt_set_placement_caching);
static void ttm_tt_free_alloced_pages(struct ttm_tt *ttm)
{
case FAULT:
/* Note - only for remote1 and remote2 */
- out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
- out = out ? 0 : 1;
+ out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000));
break;
default:
set_pwmfreq, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
set_pwmctrl, INPUT, 0);
-static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR,
show_pwmchan, set_pwmchan, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 0);
set_pwmfreq, INPUT, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
set_pwmctrl, INPUT, 1);
-static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR,
show_pwmchan, set_pwmchan, INPUT, 1);
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 1);
set_pwmfreq, INPUT, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
set_pwmctrl, INPUT, 2);
-static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR,
show_pwmchan, set_pwmchan, INPUT, 2);
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MIN, 2);
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
- &sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
- &sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
NULL,
}
/* Limits and settings, should never change update every 60 seconds */
- if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+ if (time_after(jiffies, data->limits_updated + HZ * 60) ||
!data->valid) {
data->config5 = adt7475_read(REG_CONFIG5);
}
for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
- if (!pdata->in[i])
+ struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i];
+
+ if (!cfg)
continue;
- if (pdata->in[i]->mult >= 0x10000)
+ if (cfg->mult >= 0x10000)
dev_warn(&dev->dev,
"channel %d multiplier too large\n",
i);
+ if (cfg->divider == 0) {
+ dev_err(&dev->dev, "channel %d divider zero\n", i);
+ continue;
+ }
+
ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i],
&hwmon->attrs[i], i);
if (ret) {
ATI SB600
ATI SB700
ATI SB800
- AMD SB900
+ AMD Hudson-2
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
- AMD SB900
+ AMD Hudson-2
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
unsigned short smba_idx = 0xcd6;
u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
- /* SB800 SMBus does not support forcing address */
+ /* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
- dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support "
+ dev_err(&PIIX4_dev->dev, "SMBus does not support "
"forcing address!\n");
return -EINVAL;
}
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_OSB4) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
#include <linux/completion.h>
#include <linux/platform_device.h>
#include <linux/i2c-pnx.h>
+#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/i2c.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
struct timer_list *timer = &data->mif.timer;
int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
+ if (expires <= 1)
+ expires = 2;
+
del_timer_sync(timer);
dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
if (port_ops && port_ops->init_dev)
port_ops->init_dev(drive);
}
-
- ide_port_for_each_dev(i, drive, hwif) {
- /*
- * default to PIO Mode 0 before we figure out
- * the most suited mode for the attached device
- */
- if (port_ops && port_ops->set_pio_mode)
- port_ops->set_pio_mode(drive, 0);
- }
}
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/irq.h>
-
-#ifndef CONFIG_PPC64
#include <asm/mediabay.h>
-#endif
#define DRV_NAME "ide-pmac"
int irq;
int kind;
int aapl_bus_id;
- unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
struct device_node* node;
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
+ ide_hwif_t *hwif;
+
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
pmif->timings[2] = pmif->timings[3] = value2;
}
+static int on_media_bay(pmac_ide_hwif_t *pmif)
+{
+ return pmif->mdev && pmif->mdev->media_bay != NULL;
+}
+
/* Suspend call back, should be called after the child devices
* have actually been suspended
*/
disable_irq(pmif->irq);
/* The media bay will handle itself just fine */
- if (pmif->mediabay)
+ if (on_media_bay(pmif))
return 0;
/* Kauai has bus control FCRs directly here */
static int pmac_ide_do_resume(pmac_ide_hwif_t *pmif)
{
/* Hard reset & re-enable controller (do we really need to reset ? -BenH) */
- if (!pmif->mediabay) {
+ if (!on_media_bay(pmif)) {
ppc_md.feature_call(PMAC_FTR_IDE_RESET, pmif->node, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, pmif->node, pmif->aapl_bus_id, 1);
msleep(10);
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif->mediabay) {
-#ifdef CONFIG_PMAC_MEDIABAY
- if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
+ if (on_media_bay(pmif)) {
+ if (check_media_bay(pmif->mdev->media_bay) == MB_CD) {
drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
return;
}
-#endif
drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
}
writel(KAUAI_FCR_UATA_MAGIC |
KAUAI_FCR_UATA_RESET_N |
KAUAI_FCR_UATA_ENABLE, pmif->kauai_fcr);
-
- pmif->mediabay = 0;
/* Make sure we have sane timings */
sanitize_timings(pmif);
+ /* If we are on a media bay, wait for it to settle and lock it */
+ if (pmif->mdev)
+ lock_media_bay(pmif->mdev->media_bay);
+
host = ide_host_alloc(&d, hws, 1);
- if (host == NULL)
- return -ENOMEM;
- hwif = host->ports[0];
+ if (host == NULL) {
+ rc = -ENOMEM;
+ goto bail;
+ }
+ hwif = pmif->hwif = host->ports[0];
-#ifndef CONFIG_PPC64
- /* XXX FIXME: Media bay stuff need re-organizing */
- if (np->parent && np->parent->name
- && strcasecmp(np->parent->name, "media-bay") == 0) {
-#ifdef CONFIG_PMAC_MEDIABAY
- media_bay_set_ide_infos(np->parent, pmif->regbase, pmif->irq,
- hwif);
-#endif /* CONFIG_PMAC_MEDIABAY */
- pmif->mediabay = 1;
+ if (on_media_bay(pmif)) {
+ /* Fixup bus ID for media bay */
if (!bidp)
pmif->aapl_bus_id = 1;
} else if (pmif->kind == controller_ohare) {
* units, I keep the old way
*/
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, 0, 1);
- } else
-#endif
- {
+ } else {
/* This is necessary to enable IDE when net-booting */
ppc_md.feature_call(PMAC_FTR_IDE_RESET, np, pmif->aapl_bus_id, 1);
ppc_md.feature_call(PMAC_FTR_IDE_ENABLE, np, pmif->aapl_bus_id, 1);
}
printk(KERN_INFO DRV_NAME ": Found Apple %s controller (%s), "
- "bus ID %d%s, irq %d\n", model_name[pmif->kind],
- pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
- pmif->mediabay ? " (mediabay)" : "", hw->irq);
+ "bus ID %d%s, irq %d\n", model_name[pmif->kind],
+ pmif->mdev ? "macio" : "PCI", pmif->aapl_bus_id,
+ on_media_bay(pmif) ? " (mediabay)" : "", hw->irq);
rc = ide_host_register(host, &d, hws);
- if (rc) {
- ide_host_free(host);
- return rc;
- }
+ if (rc)
+ pmif->hwif = NULL;
- return 0;
+ if (pmif->mdev)
+ unlock_media_bay(pmif->mdev->media_bay);
+
+ bail:
+ if (rc && host)
+ ide_host_free(host);
+ return rc;
}
static void __devinit pmac_ide_init_ports(struct ide_hw *hw, unsigned long base)
return rc;
}
+#ifdef CONFIG_PMAC_MEDIABAY
+static void pmac_ide_macio_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ pmac_ide_hwif_t *pmif =
+ (pmac_ide_hwif_t *)dev_get_drvdata(&mdev->ofdev.dev);
+
+ switch(mb_state) {
+ case MB_CD:
+ if (!pmif->hwif->present)
+ ide_port_scan(pmif->hwif);
+ break;
+ default:
+ if (pmif->hwif->present)
+ ide_port_unregister_devices(pmif->hwif);
+ }
+}
+#endif /* CONFIG_PMAC_MEDIABAY */
+
+
static struct of_device_id pmac_ide_macio_match[] =
{
{
.probe = pmac_ide_macio_attach,
.suspend = pmac_ide_macio_suspend,
.resume = pmac_ide_macio_resume,
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = pmac_ide_macio_mb_event,
+#endif
};
static const struct pci_device_id pmac_ide_pci_match[] = {
dev->ff = ff;
dev->flush = flush_effects;
dev->event = input_ff_event;
- set_bit(EV_FF, dev->evbit);
+ __set_bit(EV_FF, dev->evbit);
/* Copy "true" bits into ff device bitmap */
for (i = 0; i <= FF_MAX; i++)
if (test_bit(i, dev->ffbit))
- set_bit(i, ff->ffbit);
+ __set_bit(i, ff->ffbit);
/* we can emulate RUMBLE with periodic effects */
if (test_bit(FF_PERIODIC, ff->ffbit))
- set_bit(FF_RUMBLE, dev->ffbit);
+ __set_bit(FF_RUMBLE, dev->ffbit);
return 0;
}
*/
void input_ff_destroy(struct input_dev *dev)
{
- clear_bit(EV_FF, dev->evbit);
- if (dev->ff) {
- if (dev->ff->destroy)
- dev->ff->destroy(dev->ff);
- kfree(dev->ff->private);
- kfree(dev->ff);
+ struct ff_device *ff = dev->ff;
+
+ __clear_bit(EV_FF, dev->evbit);
+ if (ff) {
+ if (ff->destroy)
+ ff->destroy(ff);
+ kfree(ff->private);
+ kfree(ff);
dev->ff = NULL;
}
}
struct ml_effect_state states[FF_MEMLESS_EFFECTS];
int gain;
struct timer_list timer;
- spinlock_t timer_lock;
struct input_dev *dev;
int (*play_effect)(struct input_dev *dev, void *data,
{
struct input_dev *dev = (struct input_dev *)timer_data;
struct ml_device *ml = dev->ff->private;
+ unsigned long flags;
debug("timer: updating effects");
- spin_lock(&ml->timer_lock);
+ spin_lock_irqsave(&dev->event_lock, flags);
ml_play_effects(ml);
- spin_unlock(&ml->timer_lock);
+ spin_unlock_irqrestore(&dev->event_lock, flags);
}
+/*
+ * Sets requested gain for FF effects. Called with dev->event_lock held.
+ */
static void ml_ff_set_gain(struct input_dev *dev, u16 gain)
{
struct ml_device *ml = dev->ff->private;
int i;
- spin_lock_bh(&ml->timer_lock);
-
ml->gain = gain;
for (i = 0; i < FF_MEMLESS_EFFECTS; i++)
__clear_bit(FF_EFFECT_PLAYING, &ml->states[i].flags);
ml_play_effects(ml);
-
- spin_unlock_bh(&ml->timer_lock);
}
+/*
+ * Start/stop specified FF effect. Called with dev->event_lock held.
+ */
static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
- unsigned long flags;
-
- spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_irqrestore(&ml->timer_lock, flags);
-
return 0;
}
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect->id];
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irq(&dev->event_lock);
if (test_bit(FF_EFFECT_STARTED, &state->flags)) {
__clear_bit(FF_EFFECT_PLAYING, &state->flags);
ml_schedule_timer(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irq(&dev->event_lock);
return 0;
}
ml->private = data;
ml->play_effect = play_effect;
ml->gain = 0xffff;
- spin_lock_init(&ml->timer_lock);
setup_timer(&ml->timer, ml_effect_timer, (unsigned long)dev);
set_bit(FF_GAIN, dev->ffbit);
return 0;
}
-#define INPUT_DO_TOGGLE(dev, type, bits, on) \
- do { \
- int i; \
- if (!test_bit(EV_##type, dev->evbit)) \
- break; \
- for (i = 0; i < type##_MAX; i++) { \
- if (!test_bit(i, dev->bits##bit) || \
- !test_bit(i, dev->bits)) \
- continue; \
- dev->event(dev, EV_##type, i, on); \
- } \
+#define INPUT_DO_TOGGLE(dev, type, bits, on) \
+ do { \
+ int i; \
+ bool active; \
+ \
+ if (!test_bit(EV_##type, dev->evbit)) \
+ break; \
+ \
+ for (i = 0; i < type##_MAX; i++) { \
+ if (!test_bit(i, dev->bits##bit)) \
+ continue; \
+ \
+ active = test_bit(i, dev->bits); \
+ if (!active && !on) \
+ continue; \
+ \
+ dev->event(dev, EV_##type, i, on ? active : 0); \
+ } \
} while (0)
#ifdef CONFIG_PM
return -1;
atkbd_activate(atkbd);
+
+ /*
+ * Restore LED state and repeat rate. While input core
+ * will do this for us at resume time reconnect may happen
+ * because user requested it via sysfs or simply because
+ * keyboard was unplugged and plugged in again so we need
+ * to do it ourselves here.
+ */
+ atkbd_set_leds(atkbd);
+ if (!atkbd->softrepeat)
+ atkbd_set_repeat_rate(atkbd);
+
}
atkbd_enable(atkbd);
atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra);
+ atkbd_reset_state(atkbd);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"),
},
- .callback = lifebook_set_serio_phys,
- .driver_data = "isa0060/serio3",
+ .callback = lifebook_set_6byte_proto,
},
{
.ident = "Lifebook B142",
static int psmouse_extensions(struct psmouse *psmouse,
unsigned int max_proto, bool set_properties)
{
- bool synaptics_hardware = true;
+ bool synaptics_hardware = false;
/*
* We always check for lifebook because it does not disturb mouse
{
int type = *((unsigned int *)kp->arg);
- return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name);
+ return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name);
}
static int __init psmouse_init(void)
}
if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) {
char* tmp = &pLib->lines[0].pInterface->Layer2[0];
- dword l2_state;
- diva_strace_read_uint (pVar, &l2_state);
+ dword l2_state;
+ if (diva_strace_read_uint(pVar, &l2_state))
+ return -1;
switch (l2_state) {
case 0:
if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS)
|| (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS))
{
- len = (byte)(&(((T30_INFO *) 0)->universal_6));
+ len = offsetof(T30_INFO, universal_6);
fax_info_change = false;
if (ncpi->length >= 4)
{
for (i = 0; i < w; i++)
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i];
((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0;
- len = (byte)(((T30_INFO *) 0)->station_id + 20);
+ len = offsetof(T30_INFO, station_id) + 20;
w = fax_parms[5].length;
if (w > 20)
w = 20;
}
else
{
- len = (byte)(&(((T30_INFO *) 0)->universal_6));
+ len = offsetof(T30_INFO, universal_6);
}
fax_info_change = true;
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF)
&& (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP))
{
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
break;
}
ncpi = &m_parms[1];
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
if (plci->fax_connect_info_length < len)
{
((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0;
if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1])
& ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD)))
{
- i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
+ i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len;
while (i < plci->NL.RBuffer->length)
plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++];
}
{
plci->RData[1].P = plci->RData[0].P;
plci->RData[1].PLength = plci->RData[0].PLength;
- plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3);
+ plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3);
if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1))
plci->RData[0].PLength = 1;
else
fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING;
}
len = nlc[0];
- pos = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ pos = offsetof(T30_INFO, station_id) + 20;
if (pos < plci->fax_connect_info_length)
{
for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--)
}
PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits);
- len = ((byte)(((T30_INFO *) 0)->station_id + 20));
+ len = offsetof(T30_INFO, station_id) + 20;
for (i = 0; i < len; i++)
plci->fax_connect_info_buffer[i] = nlc[1+i];
((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0;
if (err) {
printk(KERN_ERR "error registering embedded driver: "
"%x\n", err);
- return -err;
+ return err;
}
HFC_cnt++;
printk(KERN_INFO "%d devices registered\n", HFC_cnt);
if (cs->debug & L1_DEB_WARN)
debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
+ spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
{
int to = 50;
- while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) {
+ while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) {
udelay(1);
to--;
}
modem_set_init(struct IsdnCardState *cs) {
int timeout;
-#define RCV_DELAY 20000
+#define RCV_DELAY 20
modem_write_cmd(cs, MInit_1, strlen(MInit_1));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_2, strlen(MInit_2));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_3, strlen(MInit_3));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_4, strlen(MInit_4));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY );
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_5, strlen(MInit_5));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_6, strlen(MInit_6));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
modem_write_cmd(cs, MInit_7, strlen(MInit_7));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
}
static void
modem_set_dial(struct IsdnCardState *cs, int outgoing) {
int timeout;
-#define RCV_DELAY 20000
+#define RCV_DELAY 20
modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800));
timeout = 1000;
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
if (outgoing)
modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout));
else
while(timeout-- && cs->hw.elsa.transcnt)
udelay(1000);
debugl1(cs, "msi tout=%d", timeout);
- udelay(RCV_DELAY);
+ mdelay(RCV_DELAY);
}
static void
}
/* we have a complete hdlc packet */
if (finish) {
- if ((!fifo->skbuff->data[fifo->skbuff->len - 1])
- && (fifo->skbuff->len > 3)) {
+ if (fifo->skbuff->len > 3 &&
+ !fifo->skbuff->data[fifo->skbuff->len - 1]) {
if (fifon == HFCUSB_D_RX) {
DBG(HFCUSB_DBG_DCHANNEL,
{
int to = 50;
- while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) {
+ while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) {
udelay(1);
to--;
}
if (cs->debug & L1_DEB_WARN)
debugl1(cs, " l2l1 tx_skb exist this shouldn't happen");
skb_queue_tail(&cs->sq, skb);
+ spin_unlock_irqrestore(&cs->lock, flags);
break;
}
if (cs->debug & DEB_DLOG_HEX)
int sz = ISDN_MAX_CHANNELS*sizeof(ippp_bundle);
if( (isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL )
return -ENOMEM;
- for (i = 0; i < ISDN_MAX_CHANNELS; i++) {
+ for( i = 0; i < ISDN_MAX_CHANNELS; i++ )
spin_lock_init(&isdn_ppp_bundle_arr[i].lock);
- skb_queue_head_init(&isdn_ppp_bundle_arr[i].frags);
- }
return 0;
}
if ((lp->netdev->pb = isdn_ppp_mp_bundle_alloc()) == NULL)
return -ENOMEM;
lp->next = lp->last = lp; /* nobody else in a queue */
- skb_queue_head_init(&lp->netdev->pb->frags);
+ lp->netdev->pb->frags = NULL;
lp->netdev->pb->frames = 0;
lp->netdev->pb->seq = UINT_MAX;
}
static u32 isdn_ppp_mp_get_seq( int short_seq,
struct sk_buff * skb, u32 last_seq );
-static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from,
- struct sk_buff *to);
-static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp,
- struct sk_buff *from, struct sk_buff *to,
- u32 lastseq);
-static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb);
+static struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp,
+ struct sk_buff * from, struct sk_buff * to );
+static void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp,
+ struct sk_buff * from, struct sk_buff * to );
+static void isdn_ppp_mp_free_skb( ippp_bundle * mp, struct sk_buff * skb );
static void isdn_ppp_mp_print_recv_pkt( int slot, struct sk_buff * skb );
static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
- struct sk_buff *skb)
+ struct sk_buff *skb)
{
- struct sk_buff *newfrag, *frag, *start, *nextf;
- u32 newseq, minseq, thisseq;
- isdn_mppp_stats *stats;
struct ippp_struct *is;
+ isdn_net_local * lpq;
+ ippp_bundle * mp;
+ isdn_mppp_stats * stats;
+ struct sk_buff * newfrag, * frag, * start, *nextf;
+ u32 newseq, minseq, thisseq;
unsigned long flags;
- isdn_net_local *lpq;
- ippp_bundle *mp;
int slot;
spin_lock_irqsave(&net_dev->pb->lock, flags);
- mp = net_dev->pb;
- stats = &mp->stats;
+ mp = net_dev->pb;
+ stats = &mp->stats;
slot = lp->ppp_slot;
if (slot < 0 || slot >= ISDN_MAX_CHANNELS) {
printk(KERN_ERR "%s: lp->ppp_slot(%d)\n",
return;
}
is = ippp_table[slot];
- if (++mp->frames > stats->max_queue_len)
+ if( ++mp->frames > stats->max_queue_len )
stats->max_queue_len = mp->frames;
-
+
if (is->debug & 0x8)
isdn_ppp_mp_print_recv_pkt(lp->ppp_slot, skb);
- newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ,
- skb, is->last_link_seqno);
+ newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ,
+ skb, is->last_link_seqno);
+
/* if this packet seq # is less than last already processed one,
* toss it right away, but check for sequence start case first
*/
- if (mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT)) {
+ if( mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT) ) {
mp->seq = newseq; /* the first packet: required for
* rfc1990 non-compliant clients --
* prevents constant packet toss */
spin_unlock_irqrestore(&mp->lock, flags);
return;
}
-
+
/* find the minimum received sequence number over all links */
is->last_link_seqno = minseq = newseq;
for (lpq = net_dev->queue;;) {
* packets */
newfrag = skb;
- /* Insert new fragment into the proper sequence slot. */
- skb_queue_walk(&mp->frags, frag) {
- if (MP_SEQ(frag) == newseq) {
- isdn_ppp_mp_free_skb(mp, newfrag);
- newfrag = NULL;
- break;
- }
- if (MP_LT(newseq, MP_SEQ(frag))) {
- __skb_queue_before(&mp->frags, frag, newfrag);
- newfrag = NULL;
- break;
- }
- }
- if (newfrag)
- __skb_queue_tail(&mp->frags, newfrag);
+ /* if this new fragment is before the first one, then enqueue it now. */
+ if ((frag = mp->frags) == NULL || MP_LT(newseq, MP_SEQ(frag))) {
+ newfrag->next = frag;
+ mp->frags = frag = newfrag;
+ newfrag = NULL;
+ }
- frag = skb_peek(&mp->frags);
- start = ((MP_FLAGS(frag) & MP_BEGIN_FRAG) &&
- (MP_SEQ(frag) == mp->seq)) ? frag : NULL;
- if (!start)
- goto check_overflow;
+ start = MP_FLAGS(frag) & MP_BEGIN_FRAG &&
+ MP_SEQ(frag) == mp->seq ? frag : NULL;
- /* main fragment traversing loop
+ /*
+ * main fragment traversing loop
*
* try to accomplish several tasks:
+ * - insert new fragment into the proper sequence slot (once that's done
+ * newfrag will be set to NULL)
* - reassemble any complete fragment sequence (non-null 'start'
* indicates there is a continguous sequence present)
* - discard any incomplete sequences that are below minseq -- due
* come to complete such sequence and it should be discarded
*
* loop completes when we accomplished the following tasks:
+ * - new fragment is inserted in the proper sequence ('newfrag' is
+ * set to NULL)
* - we hit a gap in the sequence, so no reassembly/processing is
* possible ('start' would be set to NULL)
*
* algorithm for this code is derived from code in the book
* 'PPP Design And Debugging' by James Carlson (Addison-Wesley)
*/
- skb_queue_walk_safe(&mp->frags, frag, nextf) {
- thisseq = MP_SEQ(frag);
-
- /* check for misplaced start */
- if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) {
- printk(KERN_WARNING"isdn_mppp(seq %d): new "
- "BEGIN flag with no prior END", thisseq);
- stats->seqerrs++;
- stats->frame_drops++;
- isdn_ppp_mp_discard(mp, start, frag);
- start = frag;
- } else if (MP_LE(thisseq, minseq)) {
- if (MP_FLAGS(frag) & MP_BEGIN_FRAG)
+ while (start != NULL || newfrag != NULL) {
+
+ thisseq = MP_SEQ(frag);
+ nextf = frag->next;
+
+ /* drop any duplicate fragments */
+ if (newfrag != NULL && thisseq == newseq) {
+ isdn_ppp_mp_free_skb(mp, newfrag);
+ newfrag = NULL;
+ }
+
+ /* insert new fragment before next element if possible. */
+ if (newfrag != NULL && (nextf == NULL ||
+ MP_LT(newseq, MP_SEQ(nextf)))) {
+ newfrag->next = nextf;
+ frag->next = nextf = newfrag;
+ newfrag = NULL;
+ }
+
+ if (start != NULL) {
+ /* check for misplaced start */
+ if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) {
+ printk(KERN_WARNING"isdn_mppp(seq %d): new "
+ "BEGIN flag with no prior END", thisseq);
+ stats->seqerrs++;
+ stats->frame_drops++;
+ start = isdn_ppp_mp_discard(mp, start,frag);
+ nextf = frag->next;
+ }
+ } else if (MP_LE(thisseq, minseq)) {
+ if (MP_FLAGS(frag) & MP_BEGIN_FRAG)
start = frag;
- else {
+ else {
if (MP_FLAGS(frag) & MP_END_FRAG)
- stats->frame_drops++;
- __skb_unlink(skb, &mp->frags);
+ stats->frame_drops++;
+ if( mp->frags == frag )
+ mp->frags = nextf;
isdn_ppp_mp_free_skb(mp, frag);
+ frag = nextf;
continue;
- }
+ }
}
-
- /* if we have end fragment, then we have full reassembly
- * sequence -- reassemble and process packet now
+
+ /* if start is non-null and we have end fragment, then
+ * we have full reassembly sequence -- reassemble
+ * and process packet now
*/
- if (MP_FLAGS(frag) & MP_END_FRAG) {
- minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK;
- /* Reassemble the packet then dispatch it */
- isdn_ppp_mp_reassembly(net_dev, lp, start, frag, thisseq);
+ if (start != NULL && (MP_FLAGS(frag) & MP_END_FRAG)) {
+ minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK;
+ /* Reassemble the packet then dispatch it */
+ isdn_ppp_mp_reassembly(net_dev, lp, start, nextf);
+
+ start = NULL;
+ frag = NULL;
- start = NULL;
- frag = NULL;
- }
+ mp->frags = nextf;
+ }
/* check if need to update start pointer: if we just
* reassembled the packet and sequence is contiguous
* below low watermark and set start to the next frag or
* clear start ptr.
*/
- if (nextf != (struct sk_buff *)&mp->frags &&
+ if (nextf != NULL &&
((thisseq+1) & MP_LONGSEQ_MASK) == MP_SEQ(nextf)) {
- /* if we just reassembled and the next one is here,
- * then start another reassembly.
- */
- if (frag == NULL) {
+ /* if we just reassembled and the next one is here,
+ * then start another reassembly. */
+
+ if (frag == NULL) {
if (MP_FLAGS(nextf) & MP_BEGIN_FRAG)
- start = nextf;
- else {
- printk(KERN_WARNING"isdn_mppp(seq %d):"
- " END flag with no following "
- "BEGIN", thisseq);
+ start = nextf;
+ else
+ {
+ printk(KERN_WARNING"isdn_mppp(seq %d):"
+ " END flag with no following "
+ "BEGIN", thisseq);
stats->seqerrs++;
}
}
- } else {
- if (nextf != (struct sk_buff *)&mp->frags &&
- frag != NULL &&
- MP_LT(thisseq, minseq)) {
+
+ } else {
+ if ( nextf != NULL && frag != NULL &&
+ MP_LT(thisseq, minseq)) {
/* we've got a break in the sequence
* and we not at the end yet
* and we did not just reassembled
* discard all the frames below low watermark
* and start over */
stats->frame_drops++;
- isdn_ppp_mp_discard(mp, start, nextf);
+ mp->frags = isdn_ppp_mp_discard(mp,start,nextf);
}
/* break in the sequence, no reassembly */
- start = NULL;
- }
- if (!start)
- break;
- }
-
-check_overflow:
+ start = NULL;
+ }
+
+ frag = nextf;
+ } /* while -- main loop */
+
+ if (mp->frags == NULL)
+ mp->frags = frag;
+
/* rather straighforward way to deal with (not very) possible
- * queue overflow
- */
+ * queue overflow */
if (mp->frames > MP_MAX_QUEUE_LEN) {
stats->overflows++;
- skb_queue_walk_safe(&mp->frags, frag, nextf) {
- if (mp->frames <= MP_MAX_QUEUE_LEN)
- break;
- __skb_unlink(frag, &mp->frags);
- isdn_ppp_mp_free_skb(mp, frag);
+ while (mp->frames > MP_MAX_QUEUE_LEN) {
+ frag = mp->frags->next;
+ isdn_ppp_mp_free_skb(mp, mp->frags);
+ mp->frags = frag;
}
}
spin_unlock_irqrestore(&mp->lock, flags);
}
-static void isdn_ppp_mp_cleanup(isdn_net_local *lp)
+static void isdn_ppp_mp_cleanup( isdn_net_local * lp )
{
- struct sk_buff *skb, *tmp;
-
- skb_queue_walk_safe(&lp->netdev->pb->frags, skb, tmp) {
- __skb_unlink(skb, &lp->netdev->pb->frags);
- isdn_ppp_mp_free_skb(lp->netdev->pb, skb);
- }
+ struct sk_buff * frag = lp->netdev->pb->frags;
+ struct sk_buff * nextfrag;
+ while( frag ) {
+ nextfrag = frag->next;
+ isdn_ppp_mp_free_skb(lp->netdev->pb, frag);
+ frag = nextfrag;
+ }
+ lp->netdev->pb->frags = NULL;
}
static u32 isdn_ppp_mp_get_seq( int short_seq,
return seq;
}
-static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from,
- struct sk_buff *to)
+struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp,
+ struct sk_buff * from, struct sk_buff * to )
{
- if (from) {
- struct sk_buff *skb, *tmp;
- int freeing = 0;
-
- skb_queue_walk_safe(&mp->frags, skb, tmp) {
- if (skb == to)
- break;
- if (skb == from)
- freeing = 1;
- if (!freeing)
- continue;
- __skb_unlink(skb, &mp->frags);
- isdn_ppp_mp_free_skb(mp, skb);
+ if( from )
+ while (from != to) {
+ struct sk_buff * next = from->next;
+ isdn_ppp_mp_free_skb(mp, from);
+ from = next;
}
- }
-}
-
-static unsigned int calc_tot_len(struct sk_buff_head *queue,
- struct sk_buff *from, struct sk_buff *to)
-{
- unsigned int tot_len = 0;
- struct sk_buff *skb;
- int found_start = 0;
-
- skb_queue_walk(queue, skb) {
- if (skb == from)
- found_start = 1;
- if (!found_start)
- continue;
- tot_len += skb->len - MP_HEADER_LEN;
- if (skb == to)
- break;
- }
- return tot_len;
+ return from;
}
-/* Reassemble packet using fragments in the reassembly queue from
- * 'from' until 'to', inclusive.
- */
-static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp,
- struct sk_buff *from, struct sk_buff *to,
- u32 lastseq)
+void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp,
+ struct sk_buff * from, struct sk_buff * to )
{
- ippp_bundle *mp = net_dev->pb;
- unsigned int tot_len;
- struct sk_buff *skb;
+ ippp_bundle * mp = net_dev->pb;
int proto;
+ struct sk_buff * skb;
+ unsigned int tot_len;
if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) {
printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n",
__func__, lp->ppp_slot);
return;
}
-
- tot_len = calc_tot_len(&mp->frags, from, to);
-
- if (MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG)) {
- if (ippp_table[lp->ppp_slot]->debug & 0x40)
+ if( MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG) ) {
+ if( ippp_table[lp->ppp_slot]->debug & 0x40 )
printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, "
- "len %d\n", MP_SEQ(from), from->len);
+ "len %d\n", MP_SEQ(from), from->len );
skb = from;
skb_pull(skb, MP_HEADER_LEN);
- __skb_unlink(skb, &mp->frags);
mp->frames--;
} else {
- struct sk_buff *walk, *tmp;
- int found_start = 0;
+ struct sk_buff * frag;
+ int n;
- if (ippp_table[lp->ppp_slot]->debug & 0x40)
- printk(KERN_DEBUG"isdn_mppp: reassembling frames %d "
- "to %d, len %d\n", MP_SEQ(from), lastseq,
- tot_len);
+ for(tot_len=n=0, frag=from; frag != to; frag=frag->next, n++)
+ tot_len += frag->len - MP_HEADER_LEN;
- skb = dev_alloc_skb(tot_len);
- if (!skb)
+ if( ippp_table[lp->ppp_slot]->debug & 0x40 )
+ printk(KERN_DEBUG"isdn_mppp: reassembling frames %d "
+ "to %d, len %d\n", MP_SEQ(from),
+ (MP_SEQ(from)+n-1) & MP_LONGSEQ_MASK, tot_len );
+ if( (skb = dev_alloc_skb(tot_len)) == NULL ) {
printk(KERN_ERR "isdn_mppp: cannot allocate sk buff "
- "of size %d\n", tot_len);
-
- found_start = 0;
- skb_queue_walk_safe(&mp->frags, walk, tmp) {
- if (walk == from)
- found_start = 1;
- if (!found_start)
- continue;
+ "of size %d\n", tot_len);
+ isdn_ppp_mp_discard(mp, from, to);
+ return;
+ }
- if (skb) {
- unsigned int len = walk->len - MP_HEADER_LEN;
- skb_copy_from_linear_data_offset(walk, MP_HEADER_LEN,
- skb_put(skb, len),
- len);
- }
- __skb_unlink(walk, &mp->frags);
- isdn_ppp_mp_free_skb(mp, walk);
+ while( from != to ) {
+ unsigned int len = from->len - MP_HEADER_LEN;
- if (walk == to)
- break;
+ skb_copy_from_linear_data_offset(from, MP_HEADER_LEN,
+ skb_put(skb,len),
+ len);
+ frag = from->next;
+ isdn_ppp_mp_free_skb(mp, from);
+ from = frag;
}
}
- if (!skb)
- return;
-
proto = isdn_ppp_strip_proto(skb);
isdn_ppp_push_higher(net_dev, lp, skb, proto);
}
-static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb)
+static void isdn_ppp_mp_free_skb(ippp_bundle * mp, struct sk_buff * skb)
{
dev_kfree_skb(skb);
mp->frames--;
static int
st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
{
- if (!ch->st || ch->st->layer1)
+ if (!ch->st || !ch->st->layer1)
return -EINVAL;
return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg);
}
{
int ret, state;
+ led_dat->gpio = -1;
+
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
dev->ofdev.dev.parent = parent;
dev->ofdev.dev.bus = &macio_bus_type;
dev->ofdev.dev.release = macio_release_dev;
+ dev->ofdev.dev.dma_parms = &dev->dma_parms;
+
+ /* Standard DMA paremeters */
+ dma_set_max_seg_size(&dev->ofdev.dev, 65536);
+ dma_set_seg_boundary(&dev->ofdev.dev, 0xffffffff);
#ifdef CONFIG_PCI
/* Set the DMA ops to the ones from the PCI device, this could be
driver_unregister(&drv->driver);
}
+/* Managed MacIO resources */
+struct macio_devres {
+ u32 res_mask;
+};
+
+static void maciom_release(struct device *gendev, void *res)
+{
+ struct macio_dev *dev = to_macio_device(gendev);
+ struct macio_devres *dr = res;
+ int i, max;
+
+ max = min(dev->n_resources, 32);
+ for (i = 0; i < max; i++) {
+ if (dr->res_mask & (1 << i))
+ macio_release_resource(dev, i);
+ }
+}
+
+int macio_enable_devres(struct macio_dev *dev)
+{
+ struct macio_devres *dr;
+
+ dr = devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
+ if (!dr) {
+ dr = devres_alloc(maciom_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+ }
+ return devres_get(&dev->ofdev.dev, dr, NULL, NULL) != NULL;
+}
+
+static struct macio_devres * find_macio_dr(struct macio_dev *dev)
+{
+ return devres_find(&dev->ofdev.dev, maciom_release, NULL, NULL);
+}
+
/**
* macio_request_resource - Request an MMIO resource
* @dev: pointer to the device holding the resource
int macio_request_resource(struct macio_dev *dev, int resource_no,
const char *name)
{
+ struct macio_devres *dr = find_macio_dr(dev);
+
if (macio_resource_len(dev, resource_no) == 0)
return 0;
macio_resource_len(dev, resource_no),
name))
goto err_out;
+
+ if (dr && resource_no < 32)
+ dr->res_mask |= 1 << resource_no;
return 0;
*/
void macio_release_resource(struct macio_dev *dev, int resource_no)
{
+ struct macio_devres *dr = find_macio_dr(dev);
+
if (macio_resource_len(dev, resource_no) == 0)
return;
release_mem_region(macio_resource_start(dev, resource_no),
macio_resource_len(dev, resource_no));
+ if (dr && resource_no < 32)
+ dr->res_mask &= ~(1 << resource_no);
}
/**
EXPORT_SYMBOL(macio_release_resource);
EXPORT_SYMBOL(macio_request_resources);
EXPORT_SYMBOL(macio_release_resources);
+EXPORT_SYMBOL(macio_enable_devres);
+
#include <linux/adb.h>
#include <linux/pmu.h>
-
-#define MB_DEBUG
-
-#ifdef MB_DEBUG
-#define MBDBG(fmt, arg...) printk(KERN_INFO fmt , ## arg)
-#else
-#define MBDBG(fmt, arg...) do { } while (0)
-#endif
-
#define MB_FCR32(bay, r) ((bay)->base + ((r) >> 2))
#define MB_FCR8(bay, r) (((volatile u8 __iomem *)((bay)->base)) + (r))
int index;
int cached_gpio;
int sleeping;
+ int user_lock;
struct mutex lock;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- ide_hwif_t *cd_port;
- void __iomem *cd_base;
- int cd_irq;
- int cd_retry;
-#endif
-#if defined(CONFIG_BLK_DEV_IDE_PMAC)
- int cd_index;
-#endif
};
#define MAX_BAYS 2
static struct media_bay_info media_bays[MAX_BAYS];
-int media_bay_count = 0;
-
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-/* check the busy bit in the media-bay ide interface
- (assumes the media-bay contains an ide device) */
-#define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0)
-#endif
+static int media_bay_count = 0;
/*
* Wait that number of ms between each step in normal polling mode
/*
* Wait this many ticks after an IDE device (e.g. CD-ROM) is inserted
- * (or until the device is ready) before waiting for busy bit to disappear
+ * (or until the device is ready) before calling into the driver
*/
#define MB_IDE_WAIT 1000
-/*
- * Timeout waiting for busy bit of an IDE device to go down
- */
-#define MB_IDE_TIMEOUT 5000
-
-/*
- * Max retries of the full power up/down sequence for an IDE device
- */
-#define MAX_CD_RETRIES 3
-
/*
* States of a media bay
*/
mb_enabling_bay, /* enable bits set, waiting MB_RESET_DELAY */
mb_resetting, /* reset bit unset, waiting MB_SETUP_DELAY */
mb_ide_resetting, /* IDE reset bit unser, waiting MB_IDE_WAIT */
- mb_ide_waiting, /* Waiting for BUSY bit to go away until MB_IDE_TIMEOUT */
mb_up, /* Media bay full */
mb_powering_down /* Powering down (avoid too fast down/up) */
};
if (onoff) {
bay->ops->power(bay, 1);
bay->state = mb_powering_up;
- MBDBG("mediabay%d: powering up\n", bay->index);
+ pr_debug("mediabay%d: powering up\n", bay->index);
} else {
/* Make sure everything is powered down & disabled */
bay->ops->power(bay, 0);
bay->state = mb_powering_down;
- MBDBG("mediabay%d: powering down\n", bay->index);
+ pr_debug("mediabay%d: powering down\n", bay->index);
}
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
}
{
int id = bay->ops->content(bay);
- if (id == bay->last_value) {
- if (id != bay->content_id) {
- bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
- /* If the device type changes without going thru
- * "MB_NO", we force a pass by "MB_NO" to make sure
- * things are properly reset
- */
- if ((id != MB_NO) && (bay->content_id != MB_NO)) {
- id = MB_NO;
- MBDBG("mediabay%d: forcing MB_NO\n", bay->index);
- }
- MBDBG("mediabay%d: switching to %d\n", bay->index, id);
- set_mb_power(bay, id != MB_NO);
- bay->content_id = id;
- if (id == MB_NO) {
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
- printk(KERN_INFO "media bay %d is empty\n", bay->index);
- }
- }
- }
- } else {
+ static char *mb_content_types[] = {
+ "a floppy drive",
+ "a floppy drive",
+ "an unsuported audio device",
+ "an ATA device",
+ "an unsupported PCI device",
+ "an unknown device",
+ };
+
+ if (id != bay->last_value) {
bay->last_value = id;
bay->value_count = 0;
+ return;
+ }
+ if (id == bay->content_id)
+ return;
+
+ bay->value_count += msecs_to_jiffies(MB_POLL_DELAY);
+ if (bay->value_count >= msecs_to_jiffies(MB_STABLE_DELAY)) {
+ /* If the device type changes without going thru
+ * "MB_NO", we force a pass by "MB_NO" to make sure
+ * things are properly reset
+ */
+ if ((id != MB_NO) && (bay->content_id != MB_NO)) {
+ id = MB_NO;
+ pr_debug("mediabay%d: forcing MB_NO\n", bay->index);
+ }
+ pr_debug("mediabay%d: switching to %d\n", bay->index, id);
+ set_mb_power(bay, id != MB_NO);
+ bay->content_id = id;
+ if (id >= MB_NO || id < 0)
+ printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
+ else
+ printk(KERN_INFO "mediabay%d: Bay contains %s\n",
+ bay->index, mb_content_types[id]);
}
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-int check_media_bay(struct device_node *which_bay, int what)
+int check_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
+ int id;
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && which_bay == media_bays[i].mdev->ofdev.node) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
- return -ENODEV;
+ if (baydev == NULL)
+ return MB_NO;
+
+ /* This returns an instant snapshot, not locking, sine
+ * we may be called with the bay lock held. The resulting
+ * fuzzyness of the result if called at the wrong time is
+ * not actually a huge deal
+ */
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return MB_NO;
+ id = bay->content_id;
+ if (bay->state != mb_up)
+ return MB_NO;
+ if (id == MB_FD1)
+ return MB_FD;
+ return id;
}
-EXPORT_SYMBOL(check_media_bay);
+EXPORT_SYMBOL_GPL(check_media_bay);
-int check_media_bay_by_base(unsigned long base, int what)
+void lock_media_bay(struct macio_dev *baydev)
{
- int i;
-
- for (i=0; i<media_bay_count; i++)
- if (media_bays[i].mdev && base == (unsigned long) media_bays[i].cd_base) {
- if ((what == media_bays[i].content_id) && media_bays[i].state == mb_up)
- return 0;
- media_bays[i].cd_index = -1;
- return -EINVAL;
- }
+ struct media_bay_info* bay;
- return -ENODEV;
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ mutex_lock(&bay->lock);
+ bay->user_lock = 1;
}
-EXPORT_SYMBOL_GPL(check_media_bay_by_base);
+EXPORT_SYMBOL_GPL(lock_media_bay);
-int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
- int irq, ide_hwif_t *hwif)
+void unlock_media_bay(struct macio_dev *baydev)
{
- int i;
+ struct media_bay_info* bay;
- for (i=0; i<media_bay_count; i++) {
- struct media_bay_info* bay = &media_bays[i];
-
- if (bay->mdev && which_bay == bay->mdev->ofdev.node) {
- int timeout = 5000, index = hwif->index;
-
- mutex_lock(&bay->lock);
-
- bay->cd_port = hwif;
- bay->cd_base = (void __iomem *) base;
- bay->cd_irq = irq;
-
- if ((MB_CD != bay->content_id) || bay->state != mb_up) {
- mutex_unlock(&bay->lock);
- return 0;
- }
- printk(KERN_DEBUG "Registered ide%d for media bay %d\n", index, i);
- do {
- if (MB_IDE_READY(i)) {
- bay->cd_index = index;
- mutex_unlock(&bay->lock);
- return 0;
- }
- mdelay(1);
- } while(--timeout);
- printk(KERN_DEBUG "Timeount waiting IDE in bay %d\n", i);
- mutex_unlock(&bay->lock);
- return -ENODEV;
- }
+ if (baydev == NULL)
+ return;
+ bay = macio_get_drvdata(baydev);
+ if (bay == NULL)
+ return;
+ if (bay->user_lock) {
+ bay->user_lock = 0;
+ mutex_unlock(&bay->lock);
}
+}
+EXPORT_SYMBOL_GPL(unlock_media_bay);
- return -ENODEV;
+static int mb_broadcast_hotplug(struct device *dev, void *data)
+{
+ struct media_bay_info* bay = data;
+ struct macio_dev *mdev;
+ struct macio_driver *drv;
+ int state;
+
+ if (dev->bus != &macio_bus_type)
+ return 0;
+
+ state = bay->state == mb_up ? bay->content_id : MB_NO;
+ if (state == MB_FD1)
+ state = MB_FD;
+ mdev = to_macio_device(dev);
+ drv = to_macio_driver(dev->driver);
+ if (dev->driver && drv->mediabay_event)
+ drv->mediabay_event(mdev, state);
+ return 0;
}
-EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
{
if (bay->state != mb_powering_down)
poll_media_bay(bay);
- /* If timer expired or polling IDE busy, run state machine */
- if ((bay->state != mb_ide_waiting) && (bay->timer != 0)) {
+ /* If timer expired run state machine */
+ if (bay->timer != 0) {
bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
if (bay->timer > 0)
return;
switch(bay->state) {
case mb_powering_up:
if (bay->ops->setup_bus(bay, bay->last_value) < 0) {
- MBDBG("mediabay%d: device not supported (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: device not supported (kind:%d)\n",
+ i, bay->content_id);
set_mb_power(bay, 0);
break;
}
bay->timer = msecs_to_jiffies(MB_RESET_DELAY);
bay->state = mb_enabling_bay;
- MBDBG("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: enabling (kind:%d)\n", i, bay->content_id);
break;
case mb_enabling_bay:
bay->ops->un_reset(bay);
bay->timer = msecs_to_jiffies(MB_SETUP_DELAY);
bay->state = mb_resetting;
- MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing bay reset (kind:%d)\n",
+ i, bay->content_id);
break;
case mb_resetting:
if (bay->content_id != MB_CD) {
- MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i,
+ bay->content_id);
bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
}
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: releasing ATA reset (kind:%d)\n",
+ i, bay->content_id);
bay->ops->un_reset_ide(bay);
bay->timer = msecs_to_jiffies(MB_IDE_WAIT);
bay->state = mb_ide_resetting;
-#else
- printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i);
- set_mb_power(bay, 0);
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
break;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
+
case mb_ide_resetting:
- bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT);
- bay->state = mb_ide_waiting;
- MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id);
+ pr_debug("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id);
+ bay->state = mb_up;
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
break;
- case mb_ide_waiting:
- if (bay->cd_base == NULL) {
- bay->timer = 0;
- bay->state = mb_up;
- MBDBG("mediabay%d: up before IDE init\n", i);
- break;
- } else if (MB_IDE_READY(i)) {
- bay->timer = 0;
- bay->state = mb_up;
- if (bay->cd_index < 0) {
- printk("mediabay %d, registering IDE...\n", i);
- pmu_suspend();
- ide_port_scan(bay->cd_port);
- if (bay->cd_port->present)
- bay->cd_index = bay->cd_port->index;
- pmu_resume();
- }
- if (bay->cd_index == -1) {
- /* We eventually do a retry */
- bay->cd_retry++;
- printk("IDE register error\n");
- set_mb_power(bay, 0);
- } else {
- printk(KERN_DEBUG "media-bay %d is ide%d\n", i, bay->cd_index);
- MBDBG("mediabay %d IDE ready\n", i);
- }
- break;
- } else if (bay->timer > 0)
- bay->timer -= msecs_to_jiffies(MB_POLL_DELAY);
- if (bay->timer <= 0) {
- printk("\nIDE Timeout in bay %d !, IDE state is: 0x%02x\n",
- i, readb(bay->cd_base + 0x70));
- MBDBG("mediabay%d: nIDE Timeout !\n", i);
- set_mb_power(bay, 0);
- bay->timer = 0;
- }
- break;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
+
case mb_powering_down:
bay->state = mb_empty;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- if (bay->cd_index >= 0) {
- printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i,
- bay->cd_index);
- ide_port_unregister_devices(bay->cd_port);
- bay->cd_index = -1;
- }
- if (bay->cd_retry) {
- if (bay->cd_retry > MAX_CD_RETRIES) {
- /* Should add an error sound (sort of beep in dmasound) */
- printk("\nmedia-bay %d, IDE device badly inserted or unrecognised\n", i);
- } else {
- /* Force a new power down/up sequence */
- bay->content_id = MB_NO;
- }
- }
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
- MBDBG("mediabay%d: end of power down\n", i);
+ device_for_each_child(&bay->mdev->ofdev.dev,
+ bay, mb_broadcast_hotplug);
+ pr_debug("mediabay%d: end of power down\n", i);
break;
}
}
bay->last_value = bay->ops->content(bay);
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->state = mb_empty;
- do {
- msleep(MB_POLL_DELAY);
- media_bay_step(i);
- } while((bay->state != mb_empty) &&
- (bay->state != mb_up));
/* Mark us ready by filling our mdev data */
macio_set_drvdata(mdev, bay);
set_mb_power(bay, 0);
msleep(MB_POWER_DELAY);
if (bay->ops->content(bay) != bay->content_id) {
- printk("mediabay%d: content changed during sleep...\n", bay->index);
+ printk("mediabay%d: Content changed during sleep...\n", bay->index);
mutex_unlock(&bay->lock);
return 0;
}
bay->last_value = bay->content_id;
bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY);
bay->timer = msecs_to_jiffies(MB_POWER_DELAY);
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- bay->cd_retry = 0;
-#endif
do {
msleep(MB_POLL_DELAY);
media_bay_step(bay->index);
for (i=0; i<MAX_BAYS; i++) {
memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info));
media_bays[i].content_id = -1;
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
- media_bays[i].cd_index = -1;
-#endif
}
if (!machine_is(powermac))
return 0;
#include <linux/fcntl.h>
#include <linux/nvram.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
{
- lock_kernel();
switch (origin) {
case 1:
offset += file->f_pos;
offset += NVRAM_SIZE;
break;
}
- if (offset < 0) {
- unlock_kernel();
+ if (offset < 0)
return -EINVAL;
- }
+
file->f_pos = offset;
- unlock_kernel();
return file->f_pos;
}
return p - buf;
}
-static int nvram_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long nvram_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch(cmd) {
case PMAC_NVRAM_GET_OFFSET:
u8 limits[3];
int last_speed[2];
int last_var[2];
+ int pwm_inv[2];
};
static enum {ADT7460, ADT7467} therm_type;
if (speed >= 0) {
manual = read_reg(th, MANUAL_MODE[fan]);
+ manual &= ~INVERT_MASK;
write_reg(th, MANUAL_MODE[fan],
- (manual|MANUAL_MASK) & (~INVERT_MASK));
+ manual | MANUAL_MASK | th->pwm_inv[fan]);
write_reg(th, FAN_SPD_SET[fan], speed);
} else {
/* back to automatic */
if(therm_type == ADT7460) {
manual = read_reg(th,
MANUAL_MODE[fan]) & (~MANUAL_MASK);
-
+ manual &= ~INVERT_MASK;
+ manual |= th->pwm_inv[fan];
write_reg(th,
MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
} else {
manual = read_reg(th, MANUAL_MODE[fan]);
+ manual &= ~INVERT_MASK;
+ manual |= th->pwm_inv[fan];
write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
}
}
i2c_set_clientdata(client, th);
th->clt = client;
- rc = read_reg(th, 0);
+ rc = read_reg(th, CONFIG_REG);
if (rc < 0) {
dev_err(&client->dev, "Thermostat failed to read config!\n");
kfree(th);
thermostat = th;
+ /* record invert bit status because fw can corrupt it after suspend */
+ th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
+ th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
+
/* be sure to really write fan speed the first time */
th->last_speed[0] = -2;
th->last_speed[1] = -2;
#include <linux/spinlock.h>
#include <linux/pm.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
static void pmu_start(void);
static irqreturn_t via_pmu_interrupt(int irq, void *arg);
static irqreturn_t gpio1_interrupt(int irq, void *arg);
-static int proc_get_info(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-static int proc_get_irqstats(char *page, char **start, off_t off,
- int count, int *eof, void *data);
+static const struct file_operations pmu_info_proc_fops;
+static const struct file_operations pmu_irqstats_proc_fops;
static void pmu_pass_intr(unsigned char *data, int len);
-static int proc_get_batt(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-static int proc_read_options(char *page, char **start, off_t off,
- int count, int *eof, void *data);
-static int proc_write_options(struct file *file, const char __user *buffer,
- unsigned long count, void *data);
+static const struct file_operations pmu_battery_proc_fops;
+static const struct file_operations pmu_options_proc_fops;
#ifdef CONFIG_ADB
struct adb_driver via_pmu_driver = {
for (i=0; i<pmu_battery_count; i++) {
char title[16];
sprintf(title, "battery_%ld", i);
- proc_pmu_batt[i] = create_proc_read_entry(title, 0, proc_pmu_root,
- proc_get_batt, (void *)i);
+ proc_pmu_batt[i] = proc_create_data(title, 0, proc_pmu_root,
+ &pmu_battery_proc_fops, (void *)i);
}
- proc_pmu_info = create_proc_read_entry("info", 0, proc_pmu_root,
- proc_get_info, NULL);
- proc_pmu_irqstats = create_proc_read_entry("interrupts", 0, proc_pmu_root,
- proc_get_irqstats, NULL);
- proc_pmu_options = create_proc_entry("options", 0600, proc_pmu_root);
- if (proc_pmu_options) {
- proc_pmu_options->read_proc = proc_read_options;
- proc_pmu_options->write_proc = proc_write_options;
- }
+ proc_pmu_info = proc_create("info", 0, proc_pmu_root, &pmu_info_proc_fops);
+ proc_pmu_irqstats = proc_create("interrupts", 0, proc_pmu_root,
+ &pmu_irqstats_proc_fops);
+ proc_pmu_options = proc_create("options", 0600, proc_pmu_root,
+ &pmu_options_proc_fops);
}
return 0;
}
2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
}
-static int
-proc_get_info(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int pmu_info_proc_show(struct seq_file *m, void *v)
{
- char* p = page;
-
- p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
- p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
- p += sprintf(p, "AC Power : %d\n",
+ seq_printf(m, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
+ seq_printf(m, "PMU firmware version : %02x\n", pmu_version);
+ seq_printf(m, "AC Power : %d\n",
((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0) || pmu_battery_count == 0);
- p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
+ seq_printf(m, "Battery count : %d\n", pmu_battery_count);
+
+ return 0;
+}
- return p - page;
+static int pmu_info_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmu_info_proc_show, NULL);
}
-static int
-proc_get_irqstats(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static const struct file_operations pmu_info_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_info_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
{
int i;
- char* p = page;
static const char *irq_names[] = {
"Total CB1 triggered events",
"Total GPIO1 triggered events",
};
for (i=0; i<11; i++) {
- p += sprintf(p, " %2u: %10u (%s)\n",
+ seq_printf(m, " %2u: %10u (%s)\n",
i, pmu_irq_stats[i], irq_names[i]);
}
- return p - page;
+ return 0;
}
-static int
-proc_get_batt(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int pmu_irqstats_proc_open(struct inode *inode, struct file *file)
{
- long batnum = (long)data;
- char *p = page;
+ return single_open(file, pmu_irqstats_proc_show, NULL);
+}
+
+static const struct file_operations pmu_irqstats_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_irqstats_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pmu_battery_proc_show(struct seq_file *m, void *v)
+{
+ long batnum = (long)m->private;
- p += sprintf(p, "\n");
- p += sprintf(p, "flags : %08x\n",
- pmu_batteries[batnum].flags);
- p += sprintf(p, "charge : %d\n",
- pmu_batteries[batnum].charge);
- p += sprintf(p, "max_charge : %d\n",
- pmu_batteries[batnum].max_charge);
- p += sprintf(p, "current : %d\n",
- pmu_batteries[batnum].amperage);
- p += sprintf(p, "voltage : %d\n",
- pmu_batteries[batnum].voltage);
- p += sprintf(p, "time rem. : %d\n",
- pmu_batteries[batnum].time_remaining);
-
- return p - page;
+ seq_putc(m, '\n');
+ seq_printf(m, "flags : %08x\n", pmu_batteries[batnum].flags);
+ seq_printf(m, "charge : %d\n", pmu_batteries[batnum].charge);
+ seq_printf(m, "max_charge : %d\n", pmu_batteries[batnum].max_charge);
+ seq_printf(m, "current : %d\n", pmu_batteries[batnum].amperage);
+ seq_printf(m, "voltage : %d\n", pmu_batteries[batnum].voltage);
+ seq_printf(m, "time rem. : %d\n", pmu_batteries[batnum].time_remaining);
+ return 0;
}
-static int
-proc_read_options(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int pmu_battery_proc_open(struct inode *inode, struct file *file)
{
- char *p = page;
+ return single_open(file, pmu_battery_proc_show, PDE(inode)->data);
+}
+static const struct file_operations pmu_battery_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_battery_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int pmu_options_proc_show(struct seq_file *m, void *v)
+{
#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
if (pmu_kind == PMU_KEYLARGO_BASED &&
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
- p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
+ seq_printf(m, "lid_wakeup=%d\n", option_lid_wakeup);
#endif
if (pmu_kind == PMU_KEYLARGO_BASED)
- p += sprintf(p, "server_mode=%d\n", option_server_mode);
+ seq_printf(m, "server_mode=%d\n", option_server_mode);
- return p - page;
+ return 0;
}
-
-static int
-proc_write_options(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+
+static int pmu_options_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmu_options_proc_show, NULL);
+}
+
+static ssize_t pmu_options_proc_write(struct file *file,
+ const char __user *buffer, size_t count, loff_t *pos)
{
char tmp[33];
char *label, *val;
- unsigned long fcount = count;
+ size_t fcount = count;
if (!count)
return -EINVAL;
return fcount;
}
+static const struct file_operations pmu_options_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pmu_options_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = pmu_options_proc_write,
+};
+
#ifdef CONFIG_ADB
/* Send an ADB command */
static int pmu_send_request(struct adb_request *req, int sync)
fct->ctrl.name = "cpu-front-fan-1";
else if (!strcmp(l, "CPU A PUMP"))
fct->ctrl.name = "cpu-pump-0";
+ else if (!strcmp(l, "CPU B PUMP"))
+ fct->ctrl.name = "cpu-pump-1";
else if (!strcmp(l, "Slots Fan") || !strcmp(l, "Slots fan") ||
!strcmp(l, "EXPANSION SLOTS INTAKE"))
fct->ctrl.name = "slots-fan";
desc->raid_disk < mddev->raid_disks */) {
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = desc->raid_disk;
+ } else if (desc->state & (1<<MD_DISK_ACTIVE)) {
+ /* active but not in sync implies recovery up to
+ * reshape position. We don't know exactly where
+ * that is, so set to zero for now */
+ if (mddev->minor_version >= 91) {
+ rdev->recovery_offset = 0;
+ rdev->raid_disk = desc->raid_disk;
+ }
}
if (desc->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
list_for_each_entry(rdev2, &mddev->disks, same_set) {
mdp_disk_t *d;
int desc_nr;
- if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
- && !test_bit(Faulty, &rdev2->flags))
+ int is_active = test_bit(In_sync, &rdev2->flags);
+
+ if (rdev2->raid_disk >= 0 &&
+ sb->minor_version >= 91)
+ /* we have nowhere to store the recovery_offset,
+ * but if it is not below the reshape_position,
+ * we can piggy-back on that.
+ */
+ is_active = 1;
+ if (rdev2->raid_disk < 0 ||
+ test_bit(Faulty, &rdev2->flags))
+ is_active = 0;
+ if (is_active)
desc_nr = rdev2->raid_disk;
else
desc_nr = next_spare++;
d->number = rdev2->desc_nr;
d->major = MAJOR(rdev2->bdev->bd_dev);
d->minor = MINOR(rdev2->bdev->bd_dev);
- if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags)
- && !test_bit(Faulty, &rdev2->flags))
+ if (is_active)
d->raid_disk = rdev2->raid_disk;
else
d->raid_disk = rdev2->desc_nr; /* compatibility */
if (test_bit(Faulty, &rdev2->flags))
d->state = (1<<MD_DISK_FAULTY);
- else if (test_bit(In_sync, &rdev2->flags)) {
+ else if (is_active) {
d->state = (1<<MD_DISK_ACTIVE);
- d->state |= (1<<MD_DISK_SYNC);
+ if (test_bit(In_sync, &rdev2->flags))
+ d->state |= (1<<MD_DISK_SYNC);
active++;
working++;
} else {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags)) {
- if (mddev->curr_resync_completed > rdev->recovery_offset)
- rdev->recovery_offset = mddev->curr_resync_completed;
if (rdev->recovery_offset > 0) {
sb->feature_map |=
cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET);
*/
mdk_rdev_t *rdev;
+ /* First make sure individual recovery_offsets are correct */
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(In_sync, &rdev->flags) &&
+ mddev->curr_resync_completed > rdev->recovery_offset)
+ rdev->recovery_offset = mddev->curr_resync_completed;
+
+ }
list_for_each_entry(rdev, &mddev->disks, same_set) {
if (rdev->sb_events == mddev->events ||
(nospares &&
skip:
mddev->curr_resync = 0;
mddev->curr_resync_completed = 0;
- mddev->resync_min = 0;
- mddev->resync_max = MaxSector;
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery))
+ /* We completed so max setting can be forgotten. */
+ mddev->resync_max = MaxSector;
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
wake_up(&resync_wait);
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
sector_nr = conf->reshape_progress;
sector_div(sector_nr, new_data_disks);
if (sector_nr) {
+ mddev->curr_resync_completed = sector_nr;
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
*skipped = 1;
return sector_nr;
}
return ERR_PTR(-ENOMEM);
}
+
+static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded)
+{
+ switch (algo) {
+ case ALGORITHM_PARITY_0:
+ if (raid_disk < max_degraded)
+ return 1;
+ break;
+ case ALGORITHM_PARITY_N:
+ if (raid_disk >= raid_disks - max_degraded)
+ return 1;
+ break;
+ case ALGORITHM_PARITY_0_6:
+ if (raid_disk == 0 ||
+ raid_disk == raid_disks - 1)
+ return 1;
+ break;
+ case ALGORITHM_LEFT_ASYMMETRIC_6:
+ case ALGORITHM_RIGHT_ASYMMETRIC_6:
+ case ALGORITHM_LEFT_SYMMETRIC_6:
+ case ALGORITHM_RIGHT_SYMMETRIC_6:
+ if (raid_disk == raid_disks - 1)
+ return 1;
+ }
+ return 0;
+}
+
static int run(mddev_t *mddev)
{
raid5_conf_t *conf;
int working_disks = 0, chunk_size;
+ int dirty_parity_disks = 0;
mdk_rdev_t *rdev;
+ sector_t reshape_offset = 0;
if (mddev->recovery_cp != MaxSector)
printk(KERN_NOTICE "raid5: %s is not clean"
"on a stripe boundary\n");
return -EINVAL;
}
+ reshape_offset = here_new * mddev->new_chunk_sectors;
/* here_new is the stripe we will write to */
here_old = mddev->reshape_position;
sector_div(here_old, mddev->chunk_sectors *
/*
* 0 for a fully functional array, 1 or 2 for a degraded array.
*/
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0 &&
- test_bit(In_sync, &rdev->flags))
+ list_for_each_entry(rdev, &mddev->disks, same_set) {
+ if (rdev->raid_disk < 0)
+ continue;
+ if (test_bit(In_sync, &rdev->flags))
working_disks++;
+ /* This disc is not fully in-sync. However if it
+ * just stored parity (beyond the recovery_offset),
+ * when we don't need to be concerned about the
+ * array being dirty.
+ * When reshape goes 'backwards', we never have
+ * partially completed devices, so we only need
+ * to worry about reshape going forwards.
+ */
+ /* Hack because v0.91 doesn't store recovery_offset properly. */
+ if (mddev->major_version == 0 &&
+ mddev->minor_version > 90)
+ rdev->recovery_offset = reshape_offset;
+
+ printk("%d: w=%d pa=%d pr=%d m=%d a=%d r=%d op1=%d op2=%d\n",
+ rdev->raid_disk, working_disks, conf->prev_algo,
+ conf->previous_raid_disks, conf->max_degraded,
+ conf->algorithm, conf->raid_disks,
+ only_parity(rdev->raid_disk,
+ conf->prev_algo,
+ conf->previous_raid_disks,
+ conf->max_degraded),
+ only_parity(rdev->raid_disk,
+ conf->algorithm,
+ conf->raid_disks,
+ conf->max_degraded));
+ if (rdev->recovery_offset < reshape_offset) {
+ /* We need to check old and new layout */
+ if (!only_parity(rdev->raid_disk,
+ conf->algorithm,
+ conf->raid_disks,
+ conf->max_degraded))
+ continue;
+ }
+ if (!only_parity(rdev->raid_disk,
+ conf->prev_algo,
+ conf->previous_raid_disks,
+ conf->max_degraded))
+ continue;
+ dirty_parity_disks++;
+ }
mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
- working_disks);
mddev->dev_sectors &= ~(mddev->chunk_sectors - 1);
mddev->resync_max_sectors = mddev->dev_sectors;
- if (mddev->degraded > 0 &&
+ if (mddev->degraded > dirty_parity_disks &&
mddev->recovery_cp != MaxSector) {
if (mddev->ok_start_degraded)
printk(KERN_WARNING
!test_bit(Faulty, &rdev->flags)) {
if (raid5_add_disk(mddev, rdev) == 0) {
char nm[20];
- set_bit(In_sync, &rdev->flags);
+ if (rdev->raid_disk >= conf->previous_raid_disks)
+ set_bit(In_sync, &rdev->flags);
+ else
+ rdev->recovery_offset = 0;
added_devices++;
- rdev->recovery_offset = 0;
sprintf(nm, "rd%d", rdev->raid_disk);
if (sysfs_create_link(&mddev->kobj,
&rdev->kobj, nm))
case RF2:
map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] -
prog_cal[RF1] + prog_tab[RF1]) /
- ((rf_freq[RF2] - rf_freq[RF1]) / 1000);
+ (s32)((rf_freq[RF2] - rf_freq[RF1]) / 1000);
map[i].rf2 = rf_freq[RF2] / 1000;
break;
case RF3:
map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] -
prog_cal[RF2] + prog_tab[RF2]) /
- ((rf_freq[RF3] - rf_freq[RF2]) / 1000);
+ (s32)((rf_freq[RF3] - rf_freq[RF2]) / 1000);
map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2];
map[i].rf3 = rf_freq[RF3] / 1000;
break;
struct tda18271_std_map_item *map;
char *mode;
int ret;
- u32 freq = params->frequency * 62500;
+ u32 freq = params->frequency * 125 *
+ ((params->mode == V4L2_TUNER_RADIO) ? 1 : 1000) / 2;
priv->mode = TDA18271_ANALOG;
if (params->mode == V4L2_TUNER_RADIO) {
- freq = freq / 1000;
map = &std_map->fm_radio;
mode = "fm";
} else if (params->std & V4L2_STD_MN) {
select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
- select DVB_TUNER_DIB0070
+ select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
int i = 0;
struct req_t req;
int ret = 0;
- memset(&req, 0, sizeof(&req));
+ memset(&req, 0, sizeof(req));
if (num > 2)
return -EINVAL;
{ NULL },
},
{ "Leadtek Winfast DTV Dongle (STK7700P based)",
- { &dib0700_usb_id_table[8] },
+ { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
{ NULL },
},
{ "AVerMedia AVerTV DVB-T Express",
},
},
- .num_device_descs = 12,
+ .num_device_descs = 11,
.devices = {
{ "DiBcom STK7070P reference design",
{ &dib0700_usb_id_table[15], NULL },
{ &dib0700_usb_id_table[30], NULL },
{ NULL },
},
- { "Terratec Cinergy T USB XXS/ T3",
- { &dib0700_usb_id_table[33],
- &dib0700_usb_id_table[52], NULL },
- { NULL },
- },
{ "Elgato EyeTV DTT",
{ &dib0700_usb_id_table[49], NULL },
{ NULL },
{ &dib0700_usb_id_table[59], NULL },
{ NULL },
},
- { "Terratec Cinergy T USB XXS (HD)",
- { &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] },
+ { "Terratec Cinergy T USB XXS (HD)/ T3",
+ { &dib0700_usb_id_table[33],
+ &dib0700_usb_id_table[52],
+ &dib0700_usb_id_table[60], NULL},
{ NULL },
},
},
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
c->operand[6] = 0; /* more/last */
- /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */
- c->operand[8] = list_management;
- c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */
+ /* Use three bytes for length field in case length > 127 */
+ c->operand[10] = list_management;
+ c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */
/* TS program map table */
- c->operand[10] = 0x02; /* Table id=2 */
- c->operand[11] = 0x80; /* Section syntax + length */
- /* c->operand[12] = XXXprogram_info_length + 12; */
- c->operand[13] = msg[1]; /* Program number */
- c->operand[14] = msg[2];
- c->operand[15] = 0x01; /* Version number=0 + current/next=1 */
- c->operand[16] = 0x00; /* Section number=0 */
- c->operand[17] = 0x00; /* Last section number=0 */
- c->operand[18] = 0x1f; /* PCR_PID=1FFF */
- c->operand[19] = 0xff;
- c->operand[20] = (program_info_length >> 8); /* Program info length */
- c->operand[21] = (program_info_length & 0xff);
+ c->operand[12] = 0x02; /* Table id=2 */
+ c->operand[13] = 0x80; /* Section syntax + length */
+ /* c->operand[14] = XXXprogram_info_length + 12; */
+ c->operand[15] = msg[1]; /* Program number */
+ c->operand[16] = msg[2];
+ c->operand[17] = 0x01; /* Version number=0 + current/next=1 */
+ c->operand[18] = 0x00; /* Section number=0 */
+ c->operand[19] = 0x00; /* Last section number=0 */
+ c->operand[20] = 0x1f; /* PCR_PID=1FFF */
+ c->operand[21] = 0xff;
+ c->operand[22] = (program_info_length >> 8); /* Program info length */
+ c->operand[23] = (program_info_length & 0xff);
/* CA descriptors at programme level */
read_pos = 6;
- write_pos = 22;
+ write_pos = 24;
if (program_info_length > 0) {
pmt_cmd_id = msg[read_pos++];
if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
c->operand[write_pos++] = 0x00;
c->operand[write_pos++] = 0x00;
- c->operand[7] = write_pos - 8;
- c->operand[12] = write_pos - 13;
+ c->operand[7] = 0x82;
+ c->operand[8] = (write_pos - 10) >> 8;
+ c->operand[9] = (write_pos - 10) & 0xff;
+ c->operand[14] = write_pos - 15;
crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
return -EOPNOTSUPP;
}
-#define ACCEPTED 0x9
-
static int fdtv_set_frontend(struct dvb_frontend *fe,
struct dvb_frontend_parameters *params)
{
struct firedtv *fdtv = fe->sec_priv;
- /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */
- if (avc_tuner_dsd(fdtv, params) != ACCEPTED)
- return -EINVAL;
- else
- return 0; /* not sure of this... */
+ return avc_tuner_dsd(fdtv, params);
}
static int fdtv_get_frontend(struct dvb_frontend *fe,
#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
extern u16 dib0070_wbd_offset(struct dvb_frontend *);
+extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open);
#else
static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return -ENODEV;
}
+
+static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+}
#endif
-extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open);
#endif
if (dib7000p_identify(st) != 0)
goto error;
+ /* FIXME: make sure the dev.parent field is initialized, or else
+ request_firmware() will hit an OOPS (this should be moved somewhere
+ more common) */
+ st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent;
+
dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
dib7000p_demod_reset(st);
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/vmalloc.h>
#include "dvbdev.h"
#include "dvb_demux.h"
.driver_info = SMS1XXX_BOARD_SIANO_NICE },
{ USB_DEVICE(0x187f, 0x0301),
.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
+ { USB_DEVICE(0x2040, 0xb900),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xb910),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
+ { USB_DEVICE(0x2040, 0xc000),
+ .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ } /* Terminating entry */
};
tvnorm = &bttv_tvnorms[norm];
- if (!memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap,
+ if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap,
sizeof (tvnorm->cropcap))) {
bttv_crop_reset(&btv->crop[0], norm);
btv->crop[1] = btv->crop[0]; /* current = default */
if (!V4L2_FIELD_HAS_BOTH(item->vb.field) &&
(item->vb.queue.next != &btv->capture)) {
item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue);
+ /* Mike Isely <isely@pobox.com> - Only check
+ * and set up the bottom field in the logic
+ * below. Don't ever do the top field. This
+ * of course means that if we set up the
+ * bottom field in the above code that we'll
+ * actually skip a field. But that's OK.
+ * Having processed only a single buffer this
+ * time, then the next time around the first
+ * available buffer should be for a top field.
+ * That will then cause us here to set up a
+ * top then a bottom field in the normal way.
+ * The alternative to this understanding is
+ * that we set up the second available buffer
+ * as a top field, but that's out of order
+ * since this driver always processes the top
+ * field first - the effect will be the two
+ * buffers being returned in the wrong order,
+ * with the second buffer also being delayed
+ * by one field time (owing to the fifo nature
+ * of videobuf). Worse still, we'll be stuck
+ * doing fields out of order now every time
+ * until something else causes a field to be
+ * dropped. By effectively forcing a field to
+ * drop this way then we always get back into
+ * sync within a single frame time. (Out of
+ * order fields can screw up deinterlacing
+ * algorithms.) */
if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) {
- if (NULL == set->top &&
- V4L2_FIELD_TOP == item->vb.field) {
- set->top = item;
- }
if (NULL == set->bottom &&
V4L2_FIELD_BOTTOM == item->vb.field) {
set->bottom = item;
static int snd_em28xx_prepare(struct snd_pcm_substream *substream)
{
+ struct em28xx *dev = snd_pcm_substream_chip(substream);
+
+ dev->adev.hwptr_done_capture = 0;
+ dev->adev.capture_transfer_done = 0;
+
return 0;
}
const
struct dmi_system_id s5k4aa_vflip_dmi_table[] = {
{
+ .ident = "BRUNEINIT",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "BRUNENIT"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "BRUNENIT"),
+ DMI_MATCH(DMI_BOARD_VERSION, "00030D0000000001")
+ }
+ }, {
.ident = "Fujitsu-Siemens Amilo Xa 2528",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528")
}
+ }, {
+ .ident = "Fujitsu-Siemens Amilo Xi 2528",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2528")
+ }
}, {
.ident = "Fujitsu-Siemens Amilo Xi 2550",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2548")
}
+ }, {
+ .ident = "MSI GX700",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "GX700"),
+ DMI_MATCH(DMI_BIOS_DATE, "12/02/2008")
+ }
}, {
.ident = "MSI GX700",
.matches = {
data[3] = 0x2c; /* reg 2, H size/8 */
data[4] = 0x48; /* reg 3, V size/4 */
data[6] = 0x06; /* reg 5, H start */
- data[8] = 0x06 + sd->sensor_type; /* reg 7, V start */
+ data[8] = 0x06 - sd->sensor_type; /* reg 7, V start */
break;
}
err_code = mr_write(gspca_dev, 11);
/* A false positive here is likely, until OVT gives me
* the definitive SOF/EOF format */
if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
- gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
+ frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
sd->packet_nr = 0;
}
PDEBUG(D_PACK, "End of frame detected");
/* Complete the last frame (if any) */
- gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
+ frame = gspca_frame_add(gspca_dev, LAST_PACKET,
+ frame, data, 0);
if (chunk_len)
PDEBUG(D_ERR, "Chunk length is "
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/sched.h>
#include <media/v4l2-common.h>
#include <media/v4l2-dev.h>
icd->sense = &sense;
cam_f.fmt.pix.pixelformat = cam_fmt->fourcc;
- ret = v4l2_subdev_call(sd, video, s_fmt, f);
+ ret = v4l2_subdev_call(sd, video, s_fmt, &cam_f);
+ cam_f.fmt.pix.pixelformat = pix->pixelformat;
+ *pix = cam_f.fmt.pix;
icd->sense = NULL;
buf = list_entry(dma_q->active.next,
struct s2255_buffer, vb.queue);
- if (!waitqueue_active(&buf->vb.done)) {
- /* no one active */
- rc = -1;
- goto unlock;
- }
list_del(&buf->vb.queue);
do_gettimeofday(&buf->vb.ts);
dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i);
.tuner_config = 3,
.mpeg = SAA7134_MPEG_DVB,
.ts_type = SAA7134_MPEG_TS_SERIAL,
+ .ts_force_val = 1,
.gpiomask = 0x0800100, /* GPIO 21 is an INPUT */
.inputs = {{
.name = name_tv,
switch (saa7134_boards[dev->board].ts_type) {
case SAA7134_MPEG_TS_PARALLEL:
saa_writeb(SAA7134_TS_SERIAL0, 0x40);
- saa_writeb(SAA7134_TS_PARALLEL, 0xec);
+ saa_writeb(SAA7134_TS_PARALLEL, 0xec |
+ (saa7134_boards[dev->board].ts_force_val << 4));
break;
case SAA7134_MPEG_TS_SERIAL:
saa_writeb(SAA7134_TS_SERIAL0, 0xd8);
- saa_writeb(SAA7134_TS_PARALLEL, 0x6c);
+ saa_writeb(SAA7134_TS_PARALLEL, 0x6c |
+ (saa7134_boards[dev->board].ts_force_val << 4));
saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc);
saa_writeb(SAA7134_TS_SERIAL1, 0x02);
break;
enum saa7134_mpeg_type mpeg;
enum saa7134_mpeg_ts_type ts_type;
unsigned int vid_port_opts;
+ unsigned int ts_force_val:1;
};
#define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name)
/* Prepare some basic command/response structures */
memset(&command_t, 0, sizeof(command_t));
- memset(&response_t, 0, sizeof(&response_t));
+ memset(&response_t, 0, sizeof(response_t));
pcommand_t = &command_t;
presponse_t = &response_t;
command_t.id = id;
width_in = scale_up(cam->ceu_rect.width, *scale_h);
height_in = scale_up(cam->ceu_rect.height, *scale_v);
- *scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width);
- *scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height);
+ *scale_h = calc_generic_scale(width_in, icd->user_width);
+ *scale_v = calc_generic_scale(height_in, icd->user_height);
return 0;
}
if (icd->iface == ici->nr) {
/* The bus->remove will be called */
device_unregister(&icd->dev);
- /* Not before device_unregister(), .remove
- * needs parent to call ici->ops->remove() */
- icd->dev.parent = NULL;
-
- /* If the host module is loaded again, device_register()
- * would complain "already initialised" */
- memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj));
+ /*
+ * Not before device_unregister(), .remove
+ * needs parent to call ici->ops->remove().
+ * If the host module is loaded again, device_register()
+ * would complain "already initialised," since 2.6.32
+ * this is also needed to prevent use-after-free of the
+ * device private data.
+ */
+ memset(&icd->dev, 0, sizeof(icd->dev));
}
}
__s32 value, __u8 *data)
{
data[0] = value == 0 ? 0 : (value > 0) ? 1 : 0xff;
- data[2] = min(abs(value), 0xff);
+ data[2] = min((int)abs(value), 0xff);
}
static struct uvc_control_mapping uvc_ctrl_mappings[] = {
ctrl->dwMaxVideoFrameSize =
frame->dwMaxVideoFrameBufferSize;
- if (stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH &&
+ if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) &&
+ stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH &&
stream->intf->num_altsetting > 1) {
u32 interval;
u32 bandwidth;
static ssize_t options_write(struct file *file, const char __user *userbuf,
size_t count, loff_t *data)
{
- unsigned long val;
- char buf[80];
+ char buf[20];
- if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0)
+ if (count >= sizeof(buf))
+ return -EINVAL;
+ if (copy_from_user(buf, userbuf, count))
return -EFAULT;
- buf[count - 1] = '\0';
- if (!strict_strtoul(buf, 10, &val))
- gru_options = val;
+ buf[count] = '\0';
+ if (strict_strtoul(buf, 0, &gru_options))
+ return -EINVAL;
return count;
}
host->pdata->cleanup(&pdev->dev);
mmc_omap_fclk_enable(host, 0);
+ free_irq(host->irq, host);
clk_put(host->fclk);
clk_disable(host->iclk);
clk_put(host->iclk);
config MTD_GPIO_ADDR
tristate "GPIO-assisted Flash Chip Support"
+ depends on GENERIC_GPIO || GPIOLIB
depends on MTD_COMPLEX_MAPPINGS
select MTD_PARTITIONS
help
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
+obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
+obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
* Licensed under the GPL-2 or later.
*/
+#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/platform_device.h>
#include <linux/types.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-
#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
#define DRIVER_NAME "gpio-addr-flash"
}
subdev->mtd->owner = THIS_MODULE;
- printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, "
- "%d-bit\n", phys, subdev->mtd->size >> 20,
+ printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n",
+ phys, (unsigned)(subdev->mtd->size >> 20),
subdev->map.bankwidth * 8);
return 0;
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Not for syndrome calculating ecc controllers, which use a special oob layout
*/
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* We need a special oob layout and handling even when OOB isn't used.
*/
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int page)
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* Hardware ECC for large page chips, require OOB to be read first.
* For this ECC mode, the write_page method is re-used from ECC_HW.
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
+ * @page: page number to read
*
* The hw generator calculates the error syndrome automatically. Therefor
* we need a special oob layout and handling.
u32 port_num;
bool promiscuous;
u32 cap;
+ u32 rx_fc; /* Rx flow control */
+ u32 tx_fc; /* Tx flow control */
};
extern const struct ethtool_ops be_ethtool_ops;
#define CQE_STATUS_COMPL_MASK 0xFFFF
#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
#define CQE_STATUS_EXTD_MASK 0xFFFF
-#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */
+#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */
struct be_mcc_compl {
u32 status; /* dword 0 */
if (ecmd->autoneg != 0)
return -EINVAL;
+ adapter->tx_fc = ecmd->tx_pause;
+ adapter->rx_fc = ecmd->rx_pause;
- status = be_cmd_set_flow_control(adapter, ecmd->tx_pause,
- ecmd->rx_pause);
- if (!status)
+ status = be_cmd_set_flow_control(adapter,
+ adapter->tx_fc, adapter->rx_fc);
+ if (status)
dev_warn(&adapter->pdev->dev, "Pause param set failed.\n");
return status;
status = be_cmd_link_status_query(adapter, &link_up);
if (status)
- return status;
+ goto ret_sts;
be_link_status_update(adapter, link_up);
+ status = be_vid_config(adapter);
+ if (status)
+ goto ret_sts;
+
+ status = be_cmd_set_flow_control(adapter,
+ adapter->tx_fc, adapter->rx_fc);
+ if (status)
+ goto ret_sts;
+
schedule_delayed_work(&adapter->work, msecs_to_jiffies(100));
- return 0;
+ret_sts:
+ return status;
}
static int be_setup(struct be_adapter *adapter)
if (status != 0)
goto rx_qs_destroy;
- status = be_vid_config(adapter);
- if (status != 0)
- goto mccqs_destroy;
-
- status = be_cmd_set_flow_control(adapter, true, true);
- if (status != 0)
- goto mccqs_destroy;
return 0;
-mccqs_destroy:
- be_mcc_queues_destroy(adapter);
rx_qs_destroy:
be_rx_queues_destroy(adapter);
tx_qs_destroy:
adapter->rx_csum = true;
+ /* Default settings for Rx and Tx flow control */
+ adapter->rx_fc = true;
+ adapter->tx_fc = true;
+
netif_set_gso_max_size(netdev, 65535);
BE_SET_NETDEV_OPS(netdev, &be_netdev_ops);
be_close(netdev);
rtnl_unlock();
}
+ be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc);
be_clear(adapter);
pci_save_state(pdev);
arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw".
If unsure, say Y.
-config CAN_SJA1000
- depends on CAN_DEV && HAS_IOMEM
- tristate "Philips SJA1000"
- ---help---
- Driver for the SJA1000 CAN controllers from Philips or NXP
-
-config CAN_SJA1000_ISA
- depends on CAN_SJA1000 && ISA
- tristate "ISA Bus based legacy SJA1000 driver"
- ---help---
- This driver adds legacy support for SJA1000 chips connected to
- the ISA bus using I/O port, memory mapped or indirect access.
-
-config CAN_SJA1000_PLATFORM
- depends on CAN_SJA1000
- tristate "Generic Platform Bus based SJA1000 driver"
- ---help---
- This driver adds support for the SJA1000 chips connected to
- the "platform bus" (Linux abstraction for directly to the
- processor attached devices). Which can be found on various
- boards from Phytec (http://www.phytec.de) like the PCM027,
- PCM038.
-
-config CAN_SJA1000_OF_PLATFORM
- depends on CAN_SJA1000 && PPC_OF
- tristate "Generic OF Platform Bus based SJA1000 driver"
- ---help---
- This driver adds support for the SJA1000 chips connected to
- the OpenFirmware "platform bus" found on embedded systems with
- OpenFirmware bindings, e.g. if you have a PowerPC based system
- you may want to enable this option.
-
-config CAN_EMS_PCI
- tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
- depends on PCI && CAN_SJA1000
- ---help---
- This driver is for the one, two or four channel CPC-PCI,
- CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
- (http://www.ems-wuensche.de).
-
-config CAN_EMS_USB
- tristate "EMS CPC-USB/ARM7 CAN/USB interface"
- depends on USB && CAN_DEV
- ---help---
- This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
- from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
-
-config CAN_KVASER_PCI
- tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
- depends on PCI && CAN_SJA1000
- ---help---
- This driver is for the the PCIcanx and PCIcan cards (1, 2 or
- 4 channel) from Kvaser (http://www.kvaser.com).
-
config CAN_AT91
tristate "Atmel AT91 onchip CAN controller"
- depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+ depends on CAN_DEV && ARCH_AT91SAM9263
---help---
This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
+source "drivers/net/can/sja1000/Kconfig"
+
+source "drivers/net/can/usb/Kconfig"
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
return 0;
}
+static size_t can_get_size(const struct net_device *dev)
+{
+ struct can_priv *priv = netdev_priv(dev);
+ size_t size;
+
+ size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */
+ size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */
+ size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */
+ size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */
+ size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */
+ if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */
+ size += sizeof(struct can_bittiming_const);
+
+ return size;
+}
+
static int can_fill_info(struct sk_buff *skb, const struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);
return -EMSGSIZE;
}
+static size_t can_get_xstats_size(const struct net_device *dev)
+{
+ return sizeof(struct can_device_stats);
+}
+
static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev)
{
struct can_priv *priv = netdev_priv(dev);
.setup = can_setup,
.newlink = can_newlink,
.changelink = can_changelink,
+ .get_size = can_get_size,
.fill_info = can_fill_info,
+ .get_xstats_size = can_get_xstats_size,
.fill_xstats = can_fill_xstats,
};
--- /dev/null
+menuconfig CAN_SJA1000
+ tristate "Philips/NXP SJA1000 devices"
+ depends on CAN_DEV && HAS_IOMEM
+
+if CAN_SJA1000
+
+config CAN_SJA1000_ISA
+ tristate "ISA Bus based legacy SJA1000 driver"
+ depends on ISA
+ ---help---
+ This driver adds legacy support for SJA1000 chips connected to
+ the ISA bus using I/O port, memory mapped or indirect access.
+
+config CAN_SJA1000_PLATFORM
+ tristate "Generic Platform Bus based SJA1000 driver"
+ ---help---
+ This driver adds support for the SJA1000 chips connected to
+ the "platform bus" (Linux abstraction for directly to the
+ processor attached devices). Which can be found on various
+ boards from Phytec (http://www.phytec.de) like the PCM027,
+ PCM038.
+
+config CAN_SJA1000_OF_PLATFORM
+ tristate "Generic OF Platform Bus based SJA1000 driver"
+ depends on PPC_OF
+ ---help---
+ This driver adds support for the SJA1000 chips connected to
+ the OpenFirmware "platform bus" found on embedded systems with
+ OpenFirmware bindings, e.g. if you have a PowerPC based system
+ you may want to enable this option.
+
+config CAN_EMS_PCI
+ tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
+ depends on PCI
+ ---help---
+ This driver is for the one, two or four channel CPC-PCI,
+ CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
+ (http://www.ems-wuensche.de).
+
+config CAN_KVASER_PCI
+ tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
+ depends on PCI
+ ---help---
+ This driver is for the the PCIcanx and PCIcan cards (1, 2 or
+ 4 channel) from Kvaser (http://www.kvaser.com).
+
+endif
--- /dev/null
+menu "CAN USB interfaces"
+ depends on USB && CAN_DEV
+
+config CAN_EMS_USB
+ tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+ ---help---
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
+endmenu
#
obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
+
+ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
- cf->can_id = msg->msg.can_msg.id;
+ cf->can_id = le32_to_cpu(msg->msg.can_msg.id);
cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc;
}
+ /* Respect byte order */
+ msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id);
+
for (i = 0; i < MAX_TX_URBS; i++) {
if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) {
context = &dev->tx_contexts[i];
cas_unlock_all_restore(cp, flags);
}
+ err = -ENOMEM;
if (cas_tx_tiny_alloc(cp) < 0)
- return -ENOMEM;
+ goto err_unlock;
/* alloc rx descriptors */
- err = -ENOMEM;
if (cas_alloc_rxds(cp) < 0)
goto err_tx_tiny;
cas_free_rxds(cp);
err_tx_tiny:
cas_tx_tiny_free(cp);
+err_unlock:
mutex_unlock(&cp->pm_mutex);
return err;
}
pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len,
PCI_DMA_FROMDEVICE);
(*sd->pg_chunk.p_cnt)--;
- if (!*sd->pg_chunk.p_cnt)
+ if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
pci_unmap_page(adap->pdev,
sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
(*sd->pg_chunk.p_cnt)--;
- if (!*sd->pg_chunk.p_cnt)
+ if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page)
pci_unmap_page(adap->pdev,
sd->pg_chunk.mapping,
fl->alloc_size,
u32 status = 0;
u32 num_pkts = 0;
- if (!netif_running(ndev))
- return 0;
-
/* Check interrupt vectors and call packet processing */
status = emac_read(EMAC_MACINVECTOR);
struct emac_priv *priv = netdev_priv(ndev);
emac_int_disable(priv);
- emac_irq(ndev->irq, priv);
+ emac_irq(ndev->irq, ndev);
emac_int_enable(priv);
}
#endif
+++ /dev/null
-/*
- * linux/drivers/net/ehea/ehea_hcall.h
- *
- * eHEA ethernet device driver for IBM eServer System p
- *
- * (C) Copyright IBM Corp. 2006
- *
- * Authors:
- * Christoph Raisch <raisch@de.ibm.com>
- * Jan-Bernd Themann <themann@de.ibm.com>
- * Thomas Klein <tklein@de.ibm.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __EHEA_HCALL_H__
-#define __EHEA_HCALL_H__
-
-/**
- * This file contains HCALL defines that are to be included in the appropriate
- * kernel files later
- */
-
-#define H_ALLOC_HEA_RESOURCE 0x278
-#define H_MODIFY_HEA_QP 0x250
-#define H_QUERY_HEA_QP 0x254
-#define H_QUERY_HEA 0x258
-#define H_QUERY_HEA_PORT 0x25C
-#define H_MODIFY_HEA_PORT 0x260
-#define H_REG_BCMC 0x264
-#define H_DEREG_BCMC 0x268
-#define H_REGISTER_HEA_RPAGES 0x26C
-#define H_DISABLE_AND_GET_HEA 0x270
-#define H_GET_HEA_INFO 0x274
-#define H_ADD_CONN 0x284
-#define H_DEL_CONN 0x288
-
-#endif /* __EHEA_HCALL_H__ */
#include <asm/hvcall.h>
#include "ehea.h"
#include "ehea_hw.h"
-#include "ehea_hcall.h"
/* Some abbreviations used here:
*
dev->dev_addr);
dev_printk(KERN_ERR, &pci_dev->dev,
"Please complain to your hardware vendor. Switching to a random MAC.\n");
- dev->dev_addr[0] = 0x00;
- dev->dev_addr[1] = 0x00;
- dev->dev_addr[2] = 0x6c;
- get_random_bytes(&dev->dev_addr[3], 3);
+ random_ether_addr(dev->dev_addr);
}
dprintk(KERN_DEBUG "%s: MAC Address %pM\n",
of_unregister_platform_driver(&fsl_pq_mdio_driver);
}
module_exit(fsl_pq_mdio_exit);
+MODULE_LICENSE("GPL");
/* EMACx_TRTR */
-#define EMAC_TRTR_SHIFT_EMAC4 27
-#define EMAC_TRTR_SHIFT 24
+#define EMAC_TRTR_SHIFT_EMAC4 24
+#define EMAC_TRTR_SHIFT 27
/* EMAC specific TX descriptor control fields (write access) */
#define EMAC_TX_CTRL_GFCS 0x0200
#include "ixgbe.h"
#include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
/* tx_buffer_info must be completely set up in the transmit path */
}
+/**
+ * ixgbe_tx_is_paused - check if the tx ring is paused
+ * @adapter: the ixgbe adapter
+ * @tx_ring: the corresponding tx_ring
+ *
+ * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the
+ * corresponding TC of this tx_ring when checking TFCS.
+ *
+ * Returns : true if paused
+ */
+static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *tx_ring)
+{
+ int tc;
+ u32 txoff = IXGBE_TFCS_TXOFF;
+
+#ifdef CONFIG_IXGBE_DCB
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ int reg_idx = tx_ring->reg_idx;
+ int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
+
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ tc = reg_idx >> 2;
+ txoff = IXGBE_TFCS_TXOFF0;
+ } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ tc = 0;
+ txoff = IXGBE_TFCS_TXOFF;
+ if (dcb_i == 8) {
+ /* TC0, TC1 */
+ tc = reg_idx >> 5;
+ if (tc == 2) /* TC2, TC3 */
+ tc += (reg_idx - 64) >> 4;
+ else if (tc == 3) /* TC4, TC5, TC6, TC7 */
+ tc += 1 + ((reg_idx - 96) >> 3);
+ } else if (dcb_i == 4) {
+ /* TC0, TC1 */
+ tc = reg_idx >> 6;
+ if (tc == 1) {
+ tc += (reg_idx - 64) >> 5;
+ if (tc == 2) /* TC2, TC3 */
+ tc += (reg_idx - 96) >> 4;
+ }
+ }
+ }
+ txoff <<= tc;
+ }
+#endif
+ return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff;
+}
+
static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
struct ixgbe_ring *tx_ring,
unsigned int eop)
adapter->detect_tx_hung = false;
if (tx_ring->tx_buffer_info[eop].time_stamp &&
time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
- !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) {
+ !ixgbe_tx_is_paused(adapter, tx_ring)) {
/* detected Tx unit hang */
union ixgbe_adv_tx_desc *tx_desc;
tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
u32 txctrl;
int cpu = get_cpu();
int q = tx_ring - adapter->tx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
if (tx_ring->cpu != cpu) {
- txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q));
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl);
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q));
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
- IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl);
}
- txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
tx_ring->cpu = cpu;
}
put_cpu();
break;
}
}
+
if (hw->mac.type == ixgbe_mac_82599EB) {
+ u32 rttdcs;
+
+ /* disable the arbiter while setting MTQC */
+ rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+ rttdcs |= IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
/* We enable 8 traffic classes, DCB only */
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
IXGBE_MTQC_8TC_8TQ));
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+
+ /* re-eable the arbiter */
+ rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
}
}
ixgbe_restore_vlan(adapter);
#ifdef CONFIG_IXGBE_DCB
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- netif_set_gso_max_size(netdev, 32768);
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ netif_set_gso_max_size(netdev, 32768);
+ else
+ netif_set_gso_max_size(netdev, 65536);
ixgbe_configure_dcb(adapter);
} else {
netif_set_gso_max_size(netdev, 65536);
} else {
pci_set_master(pdev);
pci_restore_state(pdev);
+ pci_save_state(pdev);
pci_wake_from_d3(pdev, false);
return 0;
}
-static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
+#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \
+ memcmp(mac, "\x00\xA0\x40", 3) && \
+ memcmp(mac, "\x00\x80\x19", 3) && \
+ memcmp(mac, "\x00\x05\x02", 3))
+
+static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev)
{
struct sonic_local *lp = netdev_priv(dev);
const int prom_addr = ONBOARD_SONIC_PROM_BASE;
- int i;
+ unsigned short val;
- /* On NuBus boards we can sometimes look in the ROM resources.
- No such luck for comm-slot/onboard. */
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = SONIC_READ_PROM(i);
+ /*
+ * On NuBus boards we can sometimes look in the ROM resources.
+ * No such luck for comm-slot/onboard.
+ * On the PowerBook 520, the PROM base address is a mystery.
+ */
+ if (hwreg_present((void *)prom_addr)) {
+ int i;
+
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = SONIC_READ_PROM(i);
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
- /* Most of the time, the address is bit-reversed. The NetBSD
- source has a rather long and detailed historical account of
- why this is so. */
- if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
- memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
- memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
- memcmp(dev->dev_addr, "\x00\x05\x02", 3))
+ /*
+ * Most of the time, the address is bit-reversed. The NetBSD
+ * source has a rather long and detailed historical account of
+ * why this is so.
+ */
bit_reverse_addr(dev->dev_addr);
- else
- return 0;
-
- /* If we still have what seems to be a bogus address, we'll
- look in the CAM. The top entry should be ours. */
- /* Danger! This only works if MacOS has already initialized
- the card... */
- if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
- memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
- memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
- memcmp(dev->dev_addr, "\x00\x05\x02", 3))
- {
- unsigned short val;
-
- printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
-
- SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
- SONIC_WRITE(SONIC_CEP, 15);
-
- val = SONIC_READ(SONIC_CAP2);
- dev->dev_addr[5] = val >> 8;
- dev->dev_addr[4] = val & 0xff;
- val = SONIC_READ(SONIC_CAP1);
- dev->dev_addr[3] = val >> 8;
- dev->dev_addr[2] = val & 0xff;
- val = SONIC_READ(SONIC_CAP0);
- dev->dev_addr[1] = val >> 8;
- dev->dev_addr[0] = val & 0xff;
-
- printk(KERN_INFO "HW Address from CAM 15: %pM\n",
- dev->dev_addr);
- } else return 0;
-
- if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
- memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
- memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
- memcmp(dev->dev_addr, "\x00\x05\x02", 3))
- {
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
/*
- * Still nonsense ... messed up someplace!
+ * If we still have what seems to be a bogus address, we'll
+ * look in the CAM. The top entry should be ours.
*/
- printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n");
- return -EIO;
- } else return 0;
+ printk(KERN_WARNING "macsonic: MAC address in PROM seems "
+ "to be invalid, trying CAM\n");
+ } else {
+ printk(KERN_WARNING "macsonic: cannot read MAC address from "
+ "PROM, trying CAM\n");
+ }
+
+ /* This only works if MacOS has already initialized the card. */
+
+ SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ SONIC_WRITE(SONIC_CEP, 15);
+
+ val = SONIC_READ(SONIC_CAP2);
+ dev->dev_addr[5] = val >> 8;
+ dev->dev_addr[4] = val & 0xff;
+ val = SONIC_READ(SONIC_CAP1);
+ dev->dev_addr[3] = val >> 8;
+ dev->dev_addr[2] = val & 0xff;
+ val = SONIC_READ(SONIC_CAP0);
+ dev->dev_addr[1] = val >> 8;
+ dev->dev_addr[0] = val & 0xff;
+
+ if (!INVALID_MAC(dev->dev_addr))
+ return;
+
+ /* Still nonsense ... messed up someplace! */
+
+ printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
+ "seems invalid, will use a random MAC\n");
+ random_ether_addr(dev->dev_addr);
}
static int __devinit mac_onboard_sonic_probe(struct net_device *dev)
SONIC_WRITE(SONIC_ISR, 0x7fff);
/* Now look for the MAC address. */
- if (mac_onboard_sonic_ethernet_addr(dev) != 0)
- return -ENODEV;
+ mac_onboard_sonic_ethernet_addr(dev);
/* Shared init code */
return macsonic_init(dev);
return NULL;
}
-static void __devinit mdio_gpio_bus_deinit(struct device *dev)
+static void mdio_gpio_bus_deinit(struct device *dev)
{
struct mii_bus *bus = dev_get_drvdata(dev);
struct mdio_gpio_info *bitbang = bus->priv;
}
/* Pull completed packets off the queue and receive them. */
- while ((skb = ppp_mp_reconstruct(ppp)))
- ppp_receive_nonmp_frame(ppp, skb);
+ while ((skb = ppp_mp_reconstruct(ppp))) {
+ if (pskb_may_pull(skb, 2))
+ ppp_receive_nonmp_frame(ppp, skb);
+ else {
+ ++ppp->dev->stats.rx_length_errors;
+ kfree_skb(skb);
+ ppp_receive_error(ppp);
+ }
+ }
return;
goto err_out;
}
+ /* Set PCIe reset type for EEH to fundamental. */
+ pdev->needs_freset = 1;
pci_save_state(pdev);
qdev->reg_base =
ioremap_nocache(pci_resource_start(pdev, 1),
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
if (status)
- goto end;
+ continue;
/* Process the event. If it's an AEN, it
* will be handled in-line or a worker
int bar = 0;
u16 *adrp;
- printk(KERN_INFO "%s\n", version);
+ printk("%s\n", version);
err = pci_enable_device(pdev);
if (err)
static void rtl8169_set_rxbufsize(struct rtl8169_private *tp,
struct net_device *dev)
{
- unsigned int mtu = dev->mtu;
+ unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+ tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE;
}
static int rtl8169_open(struct net_device *dev)
/* Restore the PCI state saved during initialization. */
pci_restore_state(sp->pdev);
+ pci_save_state(sp->pdev);
pci_read_config_word(sp->pdev, 0x2, &val16);
if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
break;
efx_oword_t reg;
/* GPIO 3 and the GPIO register are shared with I2C, so block that */
- mutex_lock(&efx->i2c_adap.bus_lock);
+ i2c_lock_adapter(&efx->i2c_adap);
/* Pull RST_N (GPIO 2) low then let it up again, setting the
* FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the
falcon_write(efx, ®, GPIO_CTL_REG_KER);
msleep(1);
- mutex_unlock(&efx->i2c_adap.bus_lock);
+ i2c_unlock_adapter(&efx->i2c_adap);
ssleep(1);
return 0;
struct net_device *dev = pdata->dev;
int npackets = 0;
- while (likely(netif_running(dev)) && (npackets < budget)) {
+ while (npackets < budget) {
unsigned int pktlength;
unsigned int pktwords;
struct sk_buff *skb;
mif_cfg &= ~MIF_CFG_PSELECT;
writel(mif_cfg, gp->regs + MIF_CFG);
} else {
- gp->phy_type = phy_serialink;
+#ifdef CONFIG_SPARC
+ const char *p;
+
+ p = of_get_property(gp->of_node, "shared-pins", NULL);
+ if (p && !strcmp(p, "serdes"))
+ gp->phy_type = phy_serdes;
+ else
+#endif
+ gp->phy_type = phy_serialink;
}
if (gp->phy_type == phy_mii_mdio1 ||
gp->phy_type == phy_mii_mdio0) {
* Ericsson Mobile Broadband Module (all variants)
* Motorola (DM100 and SB4100)
* Broadcom Cable Modem (reference design)
- * Toshiba (PCX1100U and F3507g)
+ * Toshiba (PCX1100U and F3507g/F3607gw)
* ...
This driver creates an interface named "ethX", where X depends on
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
}, {
- /* Ericsson F3307 */
+ /* Ericsson F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3607gw ver 3 */
USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3307 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson F3307 ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Ericsson C3607w */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
}, {
/* Toshiba F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Toshiba F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Toshiba F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
}, {
/* Dell F3507g */
USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Dell F3607gw */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
+}, {
+ /* Dell F3607gw ver 2 */
+ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM,
+ USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long) &cdc_info,
},
{ }, // END
};
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
};
-static struct virtio_driver virtio_net = {
+static struct virtio_driver virtio_net_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
static int __init init(void)
{
- return register_virtio_driver(&virtio_net);
+ return register_virtio_driver(&virtio_net_driver);
}
static void __exit fini(void)
{
- unregister_virtio_driver(&virtio_net);
+ unregister_virtio_driver(&virtio_net_driver);
}
module_init(init);
module_exit(fini);
/* configure operational mode */
ath5k_hw_set_opmode(ah);
- ath5k_hw_set_mcast_filter(ah, 0, 0);
ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
}
{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) },
/* E-machines E510 (tuliom@gmail.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) },
+ /* BenQ Joybook R55v (nowymarluk@wp.pl) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) },
/* Acer Extensa 5620z (nekoreeve@gmail.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) },
/* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */
{ ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) },
/* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */
{ ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) },
+ /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */
+ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) },
/* HP Compaq C700 (nitrousnrg@gmail.com) */
{ ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) },
/* IBM-specific AR5212 (all others) */
{
struct b43_wl *wl = hw_to_b43_wl(hw);
- mutex_lock(&wl->mutex);
+ /* FIXME: add locking */
b43_update_templates(wl);
- mutex_unlock(&wl->mutex);
return 0;
}
struct ipw2100_priv *priv;
struct net_device *dev;
- dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0);
+ dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
if (!dev)
return NULL;
priv = libipw_priv(dev);
fail:
if (dev) {
- if (registered) {
- unregister_ieee80211(priv->ieee);
+ if (registered)
unregister_netdev(dev);
- }
ipw2100_hw_stop_adapter(priv);
sysfs_remove_group(&pci_dev->dev.kobj,
&ipw2100_attribute_group);
- free_ieee80211(dev, 0);
+ free_ieee80211(dev);
pci_set_drvdata(pci_dev, NULL);
}
/* Unregister the device first - this results in close()
* being called if the device is open. If we free storage
* first, then close() will crash. */
- unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
/* ipw2100_down will ensure that there is no more pending work
if (dev->base_addr)
iounmap((void __iomem *)dev->base_addr);
- free_ieee80211(dev, 0);
+ free_ieee80211(dev);
}
pci_release_regions(pci_dev);
static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */
#endif
-static struct ieee80211_rate ipw2200_rates[] = {
- { .bitrate = 10 },
- { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
- { .bitrate = 60 },
- { .bitrate = 90 },
- { .bitrate = 120 },
- { .bitrate = 180 },
- { .bitrate = 240 },
- { .bitrate = 360 },
- { .bitrate = 480 },
- { .bitrate = 540 }
-};
-
-#define ipw2200_a_rates (ipw2200_rates + 4)
-#define ipw2200_num_a_rates 8
-#define ipw2200_bg_rates (ipw2200_rates + 0)
-#define ipw2200_num_bg_rates 12
#ifdef CONFIG_IPW2200_QOS
static int qos_enable = 0;
*
*/
+static int ipw_wx_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct ipw_priv *priv = libipw_priv(dev);
+ mutex_lock(&priv->mutex);
+ if (priv->status & STATUS_RF_KILL_MASK)
+ strcpy(wrqu->name, "radio off");
+ else if (!(priv->status & STATUS_ASSOCIATED))
+ strcpy(wrqu->name, "unassociated");
+ else
+ snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c",
+ ipw_modes[priv->assoc_request.ieee_mode]);
+ IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+ mutex_unlock(&priv->mutex);
+ return 0;
+}
+
static int ipw_set_channel(struct ipw_priv *priv, u8 channel)
{
if (channel == 0) {
/* Rebase the WE IOCTLs to zero for the handler array */
#define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT]
static iw_handler ipw_wx_handlers[] = {
- IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname,
+ IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name,
IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq,
IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
/* Called by register_netdev() */
static int ipw_net_init(struct net_device *dev)
{
- int i, rc = 0;
struct ipw_priv *priv = libipw_priv(dev);
- const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
- struct wireless_dev *wdev = &priv->ieee->wdev;
mutex_lock(&priv->mutex);
if (ipw_up(priv)) {
- rc = -EIO;
- goto out;
- }
-
- memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
-
- /* fill-out priv->ieee->bg_band */
- if (geo->bg_channels) {
- struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
-
- bg_band->band = IEEE80211_BAND_2GHZ;
- bg_band->n_channels = geo->bg_channels;
- bg_band->channels =
- kzalloc(geo->bg_channels *
- sizeof(struct ieee80211_channel), GFP_KERNEL);
- /* translate geo->bg to bg_band.channels */
- for (i = 0; i < geo->bg_channels; i++) {
- bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
- bg_band->channels[i].center_freq = geo->bg[i].freq;
- bg_band->channels[i].hw_value = geo->bg[i].channel;
- bg_band->channels[i].max_power = geo->bg[i].max_power;
- if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
- bg_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
- if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
- bg_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
- if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
- bg_band->channels[i].flags |=
- IEEE80211_CHAN_RADAR;
- /* No equivalent for LIBIPW_CH_80211H_RULES,
- LIBIPW_CH_UNIFORM_SPREADING, or
- LIBIPW_CH_B_ONLY... */
- }
- /* point at bitrate info */
- bg_band->bitrates = ipw2200_bg_rates;
- bg_band->n_bitrates = ipw2200_num_bg_rates;
-
- wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
- }
-
- /* fill-out priv->ieee->a_band */
- if (geo->a_channels) {
- struct ieee80211_supported_band *a_band = &priv->ieee->a_band;
-
- a_band->band = IEEE80211_BAND_5GHZ;
- a_band->n_channels = geo->a_channels;
- a_band->channels =
- kzalloc(geo->a_channels *
- sizeof(struct ieee80211_channel), GFP_KERNEL);
- /* translate geo->bg to a_band.channels */
- for (i = 0; i < geo->a_channels; i++) {
- a_band->channels[i].band = IEEE80211_BAND_2GHZ;
- a_band->channels[i].center_freq = geo->a[i].freq;
- a_band->channels[i].hw_value = geo->a[i].channel;
- a_band->channels[i].max_power = geo->a[i].max_power;
- if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY)
- a_band->channels[i].flags |=
- IEEE80211_CHAN_PASSIVE_SCAN;
- if (geo->a[i].flags & LIBIPW_CH_NO_IBSS)
- a_band->channels[i].flags |=
- IEEE80211_CHAN_NO_IBSS;
- if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT)
- a_band->channels[i].flags |=
- IEEE80211_CHAN_RADAR;
- /* No equivalent for LIBIPW_CH_80211H_RULES,
- LIBIPW_CH_UNIFORM_SPREADING, or
- LIBIPW_CH_B_ONLY... */
- }
- /* point at bitrate info */
- a_band->bitrates = ipw2200_a_rates;
- a_band->n_bitrates = ipw2200_num_a_rates;
-
- wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band;
- }
-
- set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
-
- /* With that information in place, we can now register the wiphy... */
- if (wiphy_register(wdev->wiphy)) {
- rc = -EIO;
- goto out;
+ mutex_unlock(&priv->mutex);
+ return -EIO;
}
-out:
mutex_unlock(&priv->mutex);
- return rc;
+ return 0;
}
/* PCI driver stuff */
if (priv->prom_net_dev)
return -EPERM;
- priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1);
+ priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv));
if (priv->prom_net_dev == NULL)
return -ENOMEM;
rc = register_netdev(priv->prom_net_dev);
if (rc) {
- free_ieee80211(priv->prom_net_dev, 1);
+ free_ieee80211(priv->prom_net_dev);
priv->prom_net_dev = NULL;
return rc;
}
return;
unregister_netdev(priv->prom_net_dev);
- free_ieee80211(priv->prom_net_dev, 1);
+ free_ieee80211(priv->prom_net_dev);
priv->prom_net_dev = NULL;
}
struct ipw_priv *priv;
int i;
- net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0);
+ net_dev = alloc_ieee80211(sizeof(struct ipw_priv));
if (net_dev == NULL) {
err = -ENOMEM;
goto out;
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
- unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
goto out_remove_sysfs;
}
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
out_free_ieee80211:
- free_ieee80211(priv->net_dev, 0);
+ free_ieee80211(priv->net_dev);
out:
return err;
}
mutex_unlock(&priv->mutex);
- unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
if (priv->rxq) {
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
- free_ieee80211(priv->net_dev, 0);
+ free_ieee80211(priv->net_dev);
free_firmware();
}
#include <linux/ieee80211.h>
#include <net/lib80211.h>
-#include <net/cfg80211.h>
#define LIBIPW_VERSION "git-1.1.13"
struct libipw_device {
struct net_device *dev;
- struct wireless_dev wdev;
struct libipw_security sec;
/* Bookkeeping structures */
struct libipw_stats ieee_stats;
struct libipw_geo geo;
- struct ieee80211_supported_band bg_band;
- struct ieee80211_supported_band a_band;
/* Probe / Beacon management */
struct list_head network_free_list;
}
/* ieee80211.c */
-extern void free_ieee80211(struct net_device *dev, int monitor);
-extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
-extern void unregister_ieee80211(struct libipw_device *ieee);
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
extern void libipw_networks_age(struct libipw_device *ieee,
MODULE_AUTHOR(DRV_COPYRIGHT);
MODULE_LICENSE("GPL");
-struct cfg80211_ops libipw_config_ops = { };
-void *libipw_wiphy_privid = &libipw_wiphy_privid;
-
static int libipw_networks_allocate(struct libipw_device *ieee)
{
if (ieee->networks)
}
EXPORT_SYMBOL(libipw_change_mtu);
-struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
+struct net_device *alloc_ieee80211(int sizeof_priv)
{
struct libipw_device *ieee;
struct net_device *dev;
ieee->dev = dev;
- if (!monitor) {
- ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0);
- if (!ieee->wdev.wiphy) {
- LIBIPW_ERROR("Unable to allocate wiphy.\n");
- goto failed_free_netdev;
- }
-
- ieee->dev->ieee80211_ptr = &ieee->wdev;
- ieee->wdev.iftype = NL80211_IFTYPE_STATION;
-
- /* Fill-out wiphy structure bits we know... Not enough info
- here to call set_wiphy_dev or set MAC address or channel info
- -- have to do that in ->ndo_init... */
- ieee->wdev.wiphy->privid = libipw_wiphy_privid;
-
- ieee->wdev.wiphy->max_scan_ssids = 1;
- ieee->wdev.wiphy->max_scan_ie_len = 0;
- ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION)
- | BIT(NL80211_IFTYPE_ADHOC);
- }
-
err = libipw_networks_allocate(ieee);
if (err) {
LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err);
- goto failed_free_wiphy;
+ goto failed_free_netdev;
}
libipw_networks_initialize(ieee);
return dev;
-failed_free_wiphy:
- if (!monitor)
- wiphy_free(ieee->wdev.wiphy);
failed_free_netdev:
free_netdev(dev);
failed:
return NULL;
}
-void free_ieee80211(struct net_device *dev, int monitor)
+void free_ieee80211(struct net_device *dev)
{
struct libipw_device *ieee = netdev_priv(dev);
lib80211_crypt_info_free(&ieee->crypt_info);
libipw_networks_free(ieee);
-
- /* free cfg80211 resources */
- if (!monitor)
- wiphy_free(ieee->wdev.wiphy);
-
free_netdev(dev);
}
-void unregister_ieee80211(struct libipw_device *ieee)
-{
- wiphy_unregister(ieee->wdev.wiphy);
- kfree(ieee->a_band.channels);
- kfree(ieee->bg_band.channels);
-}
-
#ifdef CONFIG_LIBIPW_DEBUG
static int debug = 0;
EXPORT_SYMBOL(alloc_ieee80211);
EXPORT_SYMBOL(free_ieee80211);
-EXPORT_SYMBOL(unregister_ieee80211);
.max_ll_items = OTP_MAX_LL_ITEMS_1000,
.shadow_ram_support = false,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
/*
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
struct iwl_cfg iwl6050_2agn_cfg = {
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
struct iwl_cfg iwl6000_3agn_cfg = {
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
struct iwl_cfg iwl6050_3agn_cfg = {
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
+ .use_rts_for_ht = true, /* use rts/cts protection */
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
else if (tid == IWL_AGG_ALL_TID)
for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+ if (priv->cfg->use_rts_for_ht) {
+ /*
+ * switch to RTS/CTS if it is the prefer protection method
+ * for HT traffic
+ */
+ IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n");
+ priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
+ iwlcore_commit_rxon(priv);
+ }
}
static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
/* always get timestamp with Rx frame */
priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
- /* allow CTS-to-self if possible. this is relevant only for
- * 5000, but will not damage 4965 */
- priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
ret = iwl_check_rxon_cmd(priv);
if (ret) {
"Could not send WEP static key.\n");
}
+ /*
+ * allow CTS-to-self if possible for new association.
+ * this is relevant only for 5000 series and up,
+ * but will not damage 4965
+ */
+ priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+
/* Apply the new configuration
* RXON assoc doesn't clear the station table in uCode,
*/
* @pa_type: used by 6000 series only to identify the type of Power Amplifier
* @max_ll_items: max number of OTP blocks
* @shadow_ram_support: shadow support for OTP memory
+ * @use_rts_for_ht: use rts/cts protection for HT traffic
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
const bool shadow_ram_support;
const bool ht_greenfield_support;
const bool broken_powersave;
+ bool use_rts_for_ht;
};
/***************************
struct lbs_private *priv = dev->ml_priv;
uint32_t criteria = 0;
- if (priv->wol_criteria == 0xffffffff && wol->wolopts)
- return -EOPNOTSUPP;
-
if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY))
return -EOPNOTSUPP;
- if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA;
- if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA;
- if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA;
- if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT;
+ if (wol->wolopts & WAKE_UCAST)
+ criteria |= EHS_WAKE_ON_UNICAST_DATA;
+ if (wol->wolopts & WAKE_MCAST)
+ criteria |= EHS_WAKE_ON_MULTICAST_DATA;
+ if (wol->wolopts & WAKE_BCAST)
+ criteria |= EHS_WAKE_ON_BROADCAST_DATA;
+ if (wol->wolopts & WAKE_PHY)
+ criteria |= EHS_WAKE_ON_MAC_EVENT;
+ if (wol->wolopts == 0)
+ criteria |= EHS_REMOVE_WAKEUP;
return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL);
}
static int p54u_firmware_reset_3887(struct ieee80211_hw *dev)
{
struct p54u_priv *priv = dev->priv;
- u8 buf[4];
+ u8 *buf;
int ret;
- memcpy(&buf, p54u_romboot_3887, sizeof(buf));
+ buf = kmalloc(4, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ memcpy(buf, p54u_romboot_3887, 4);
ret = p54u_bulk_msg(priv, P54U_PIPE_DATA,
- buf, sizeof(buf));
+ buf, 4);
+ kfree(buf);
if (ret)
dev_err(&priv->udev->dev, "(p54usb) unable to jump to "
"boot ROM (%d)!\n", ret);
mutex_init(&rt2x00dev->csr_mutex);
+ set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+
/*
* Make room for rt2x00_intf inside the per-interface
* structure ieee80211_vif.
rt2x00leds_register(rt2x00dev);
rt2x00debug_register(rt2x00dev);
- set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
-
return 0;
exit:
rt2x00link_reset_tuner(rt2x00dev, false);
- ieee80211_queue_delayed_work(rt2x00dev->hw,
- &link->work, LINK_TUNE_INTERVAL);
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->work, LINK_TUNE_INTERVAL);
}
void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev)
* Increase tuner counter, and reschedule the next link tuner run.
*/
link->count++;
- ieee80211_queue_delayed_work(rt2x00dev->hw,
- &link->work, LINK_TUNE_INTERVAL);
+
+ if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ ieee80211_queue_delayed_work(rt2x00dev->hw,
+ &link->work, LINK_TUNE_INTERVAL);
}
void rt2x00link_register(struct rt2x00_dev *rt2x00dev)
(requesttype == USB_VENDOR_REQUEST_IN) ?
usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0);
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return -ENODEV;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
status = usb_control_msg(usb_dev, pipe, request, requesttype,
* -ENODEV: Device has disappeared, no point continuing.
* All other errors: Try again.
*/
- else if (status == -ENODEV)
+ else if (status == -ENODEV) {
+ clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
break;
+ }
}
ERROR(rt2x00dev,
{
unsigned int i;
+ if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+ return -ENODEV;
+
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00usb_register_read_lock(rt2x00dev, offset, reg);
if (!rt2x00_get_field32(*reg, field))
/* turn the LED off before exiting */
ieee80211_queue_delayed_work(dev, &priv->led_off, 0);
- cancel_delayed_work_sync(&priv->led_off);
- cancel_delayed_work_sync(&priv->led_on);
rtl8187_unregister_led(&priv->led_rx);
rtl8187_unregister_led(&priv->led_tx);
+ cancel_delayed_work_sync(&priv->led_off);
+ cancel_delayed_work_sync(&priv->led_on);
}
#endif /* def CONFIG_RTL8187_LED */
#include <net/mac80211.h>
#include "rtl8187.h"
+#include "rtl8187_rfkill.h"
static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
{
return 0;
}
-static int of_platform_device_suspend(struct device *dev, pm_message_t state)
+static void of_platform_device_shutdown(struct device *dev)
{
struct of_device *of_dev = to_of_device(dev);
struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
- int error = 0;
- if (dev->driver && drv->suspend)
- error = drv->suspend(of_dev, state);
- return error;
+ if (dev->driver && drv->shutdown)
+ drv->shutdown(of_dev);
}
-static int of_platform_device_resume(struct device * dev)
+#ifdef CONFIG_PM_SLEEP
+
+static int of_platform_legacy_suspend(struct device *dev, pm_message_t mesg)
{
struct of_device *of_dev = to_of_device(dev);
struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
- int error = 0;
+ int ret = 0;
- if (dev->driver && drv->resume)
- error = drv->resume(of_dev);
- return error;
+ if (dev->driver && drv->suspend)
+ ret = drv->suspend(of_dev, mesg);
+ return ret;
}
-static void of_platform_device_shutdown(struct device *dev)
+static int of_platform_legacy_resume(struct device *dev)
{
struct of_device *of_dev = to_of_device(dev);
struct of_platform_driver *drv = to_of_platform_driver(dev->driver);
+ int ret = 0;
- if (dev->driver && drv->shutdown)
- drv->shutdown(of_dev);
+ if (dev->driver && drv->resume)
+ ret = drv->resume(of_dev);
+ return ret;
+}
+
+static int of_platform_pm_prepare(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (drv && drv->pm && drv->pm->prepare)
+ ret = drv->pm->prepare(dev);
+
+ return ret;
+}
+
+static void of_platform_pm_complete(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+
+ if (drv && drv->pm && drv->pm->complete)
+ drv->pm->complete(dev);
+}
+
+#ifdef CONFIG_SUSPEND
+
+static int of_platform_pm_suspend(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend)
+ ret = drv->pm->suspend(dev);
+ } else {
+ ret = of_platform_legacy_suspend(dev, PMSG_SUSPEND);
+ }
+
+ return ret;
}
+static int of_platform_pm_suspend_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->suspend_noirq)
+ ret = drv->pm->suspend_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_resume(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume)
+ ret = drv->pm->resume(dev);
+ } else {
+ ret = of_platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_resume_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->resume_noirq)
+ ret = drv->pm->resume_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_SUSPEND */
+
+#define of_platform_pm_suspend NULL
+#define of_platform_pm_resume NULL
+#define of_platform_pm_suspend_noirq NULL
+#define of_platform_pm_resume_noirq NULL
+
+#endif /* !CONFIG_SUSPEND */
+
+#ifdef CONFIG_HIBERNATION
+
+static int of_platform_pm_freeze(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze)
+ ret = drv->pm->freeze(dev);
+ } else {
+ ret = of_platform_legacy_suspend(dev, PMSG_FREEZE);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_freeze_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->freeze_noirq)
+ ret = drv->pm->freeze_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_thaw(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw)
+ ret = drv->pm->thaw(dev);
+ } else {
+ ret = of_platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_thaw_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->thaw_noirq)
+ ret = drv->pm->thaw_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_poweroff(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff)
+ ret = drv->pm->poweroff(dev);
+ } else {
+ ret = of_platform_legacy_suspend(dev, PMSG_HIBERNATE);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_poweroff_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->poweroff_noirq)
+ ret = drv->pm->poweroff_noirq(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_restore(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore)
+ ret = drv->pm->restore(dev);
+ } else {
+ ret = of_platform_legacy_resume(dev);
+ }
+
+ return ret;
+}
+
+static int of_platform_pm_restore_noirq(struct device *dev)
+{
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (!drv)
+ return 0;
+
+ if (drv->pm) {
+ if (drv->pm->restore_noirq)
+ ret = drv->pm->restore_noirq(dev);
+ }
+
+ return ret;
+}
+
+#else /* !CONFIG_HIBERNATION */
+
+#define of_platform_pm_freeze NULL
+#define of_platform_pm_thaw NULL
+#define of_platform_pm_poweroff NULL
+#define of_platform_pm_restore NULL
+#define of_platform_pm_freeze_noirq NULL
+#define of_platform_pm_thaw_noirq NULL
+#define of_platform_pm_poweroff_noirq NULL
+#define of_platform_pm_restore_noirq NULL
+
+#endif /* !CONFIG_HIBERNATION */
+
+static struct dev_pm_ops of_platform_dev_pm_ops = {
+ .prepare = of_platform_pm_prepare,
+ .complete = of_platform_pm_complete,
+ .suspend = of_platform_pm_suspend,
+ .resume = of_platform_pm_resume,
+ .freeze = of_platform_pm_freeze,
+ .thaw = of_platform_pm_thaw,
+ .poweroff = of_platform_pm_poweroff,
+ .restore = of_platform_pm_restore,
+ .suspend_noirq = of_platform_pm_suspend_noirq,
+ .resume_noirq = of_platform_pm_resume_noirq,
+ .freeze_noirq = of_platform_pm_freeze_noirq,
+ .thaw_noirq = of_platform_pm_thaw_noirq,
+ .poweroff_noirq = of_platform_pm_poweroff_noirq,
+ .restore_noirq = of_platform_pm_restore_noirq,
+};
+
+#define OF_PLATFORM_PM_OPS_PTR (&of_platform_dev_pm_ops)
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define OF_PLATFORM_PM_OPS_PTR NULL
+
+#endif /* !CONFIG_PM_SLEEP */
+
int of_bus_type_init(struct bus_type *bus, const char *name)
{
bus->name = name;
bus->match = of_platform_bus_match;
bus->probe = of_platform_device_probe;
bus->remove = of_platform_device_remove;
- bus->suspend = of_platform_device_suspend;
- bus->resume = of_platform_device_resume;
bus->shutdown = of_platform_device_shutdown;
bus->dev_attrs = of_platform_device_attrs;
+ bus->pm = OF_PLATFORM_PM_OPS_PTR;
return bus_register(bus);
}
int ret = 0;
drhd = (struct acpi_dmar_hardware_unit *)header;
- if (!drhd->address) {
- /* Promote an attitude of violence to a BIOS engineer today */
- WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
- "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR),
- dmi_get_system_info(DMI_BIOS_VERSION),
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- return -ENODEV;
- }
dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
if (!dmaru)
return -ENOMEM;
return 0;
}
+int __init check_zero_address(void)
+{
+ struct acpi_table_dmar *dmar;
+ struct acpi_dmar_header *entry_header;
+ struct acpi_dmar_hardware_unit *drhd;
+
+ dmar = (struct acpi_table_dmar *)dmar_tbl;
+ entry_header = (struct acpi_dmar_header *)(dmar + 1);
+
+ while (((unsigned long)entry_header) <
+ (((unsigned long)dmar) + dmar_tbl->length)) {
+ /* Avoid looping forever on bad ACPI tables */
+ if (entry_header->length == 0) {
+ printk(KERN_WARNING PREFIX
+ "Invalid 0-length structure\n");
+ return 0;
+ }
+
+ if (entry_header->type == ACPI_DMAR_TYPE_HARDWARE_UNIT) {
+ drhd = (void *)entry_header;
+ if (!drhd->address) {
+ /* Promote an attitude of violence to a BIOS engineer today */
+ WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+#ifdef CONFIG_DMAR
+ dmar_disabled = 1;
+#endif
+ return 0;
+ }
+ break;
+ }
+
+ entry_header = ((void *)entry_header + entry_header->length);
+ }
+ return 1;
+}
+
void __init detect_intel_iommu(void)
{
int ret;
ret = dmar_table_detect();
-
+ if (ret)
+ ret = check_zero_address();
{
#ifdef CONFIG_INTR_REMAP
struct acpi_table_dmar *dmar;
size = PAGE_ALIGN(size);
order = get_order(size);
- flags &= ~(GFP_DMA | GFP_DMA32);
+
+ if (!iommu_no_mapping(hwdev))
+ flags &= ~(GFP_DMA | GFP_DMA32);
+ else if (hwdev->coherent_dma_mask < dma_get_required_mask(hwdev)) {
+ if (hwdev->coherent_dma_mask < DMA_BIT_MASK(32))
+ flags |= GFP_DMA;
+ else
+ flags |= GFP_DMA32;
+ }
vaddr = (void *)__get_free_pages(flags, order);
if (!vaddr)
}
#endif /* CONFIG_PM */
+/*
+ * Here we only respond to action of unbound device from driver.
+ *
+ * Added device is not attached to its DMAR domain here yet. That will happen
+ * when mapping the device to iova.
+ */
+static int device_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct device *dev = data;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct dmar_domain *domain;
+
+ domain = find_domain(pdev);
+ if (!domain)
+ return 0;
+
+ if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through)
+ domain_remove_one_dev_info(domain, pdev);
+
+ return 0;
+}
+
+static struct notifier_block device_nb = {
+ .notifier_call = device_notifier,
+};
+
int __init intel_iommu_init(void)
{
int ret = 0;
register_iommu(&intel_iommu_ops);
+ bus_register_notifier(&pci_bus_type, &device_nb);
+
return 0;
}
free_link_state(link);
/* Recheck latencies and configure upstream links */
- pcie_update_aspm_capable(root);
- pcie_config_aspm_path(parent_link);
+ if (parent_link) {
+ pcie_update_aspm_capable(root);
+ pcie_config_aspm_path(parent_link);
+ }
out:
mutex_unlock(&aspm_lock);
up_read(&pci_bus_sem);
/* The actual device the driver binds to */
static struct eeepc_hotk *ehotk;
-static void eeepc_rfkill_hotplug(bool real);
-
/* Platform device/driver */
static int eeepc_hotk_thaw(struct device *device);
static int eeepc_hotk_restore(struct device *device);
static int eeepc_rfkill_set(void *data, bool blocked)
{
unsigned long asl = (unsigned long)data;
- int ret;
-
- if (asl != CM_ASL_WLAN)
- return set_acpi(asl, !blocked);
-
- /* hack to avoid panic with rt2860sta */
- if (blocked)
- eeepc_rfkill_hotplug(false);
- ret = set_acpi(asl, !blocked);
- return ret;
+ return set_acpi(asl, !blocked);
}
static const struct rfkill_ops eeepc_rfkill_ops = {
* If the following call to set_acpi() fails, it's because there's no
* camera so we can ignore the error.
*/
- set_acpi(CM_ASL_CAMERA, 1);
+ if (get_acpi(CM_ASL_CAMERA) == 0)
+ set_acpi(CM_ASL_CAMERA, 1);
}
/*
return 0;
}
-static void eeepc_rfkill_hotplug(bool real)
+static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
struct pci_bus *bus;
- bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
+ bool blocked = eeepc_wlan_rfkill_blocked();
- if (real && ehotk->wlan_rfkill)
+ if (ehotk->wlan_rfkill)
rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
mutex_lock(&ehotk->hotplug_lock);
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
{
/* Refresh both wlan rfkill state and pci hotplug */
if (ehotk->wlan_rfkill)
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
if (ehotk->bluetooth_rfkill)
rfkill_set_sw_state(ehotk->bluetooth_rfkill,
* Refresh pci hotplug in case the rfkill state was changed after
* eeepc_unregister_rfkill_notifier()
*/
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
if (ehotk->hotplug_slot)
pci_hp_deregister(ehotk->hotplug_slot);
* Refresh pci hotplug in case the rfkill state was changed during
* setup.
*/
- eeepc_rfkill_hotplug(true);
+ eeepc_rfkill_hotplug();
exit:
if (result && result != -ENODEV)
{
struct pps_device *pps;
unsigned long flags;
+ int captured = 0;
if ((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0) {
printk(KERN_ERR "pps: unknown event (%x) for source %d\n",
/* Check the event */
pps->current_mode = pps->params.mode;
- if (event & PPS_CAPTUREASSERT) {
+ if ((event & PPS_CAPTUREASSERT) &
+ (pps->params.mode & PPS_CAPTUREASSERT)) {
/* We have to add an offset? */
if (pps->params.mode & PPS_OFFSETASSERT)
pps_add_offset(ts, &pps->params.assert_off_tu);
pps->assert_sequence++;
pr_debug("capture assert seq #%u for source %d\n",
pps->assert_sequence, source);
+
+ captured = ~0;
}
- if (event & PPS_CAPTURECLEAR) {
+ if ((event & PPS_CAPTURECLEAR) &
+ (pps->params.mode & PPS_CAPTURECLEAR)) {
/* We have to add an offset? */
if (pps->params.mode & PPS_OFFSETCLEAR)
pps_add_offset(ts, &pps->params.clear_off_tu);
pps->clear_sequence++;
pr_debug("capture clear seq #%u for source %d\n",
pps->clear_sequence, source);
+
+ captured = ~0;
}
- pps->go = ~0;
- wake_up_interruptible(&pps->queue);
+ /* Wake up iif captured somthing */
+ if (captured) {
+ pps->go = ~0;
+ wake_up_interruptible(&pps->queue);
- kill_fasync(&pps->async_queue, SIGIO, POLL_IN);
+ kill_fasync(&pps->async_queue, SIGIO, POLL_IN);
+ }
spin_unlock_irqrestore(&pps->lock, flags);
case PPS_GETPARAMS:
pr_debug("PPS_GETPARAMS: source %d\n", pps->id);
- /* Return current parameters */
- err = copy_to_user(uarg, &pps->params,
- sizeof(struct pps_kparams));
+ spin_lock_irq(&pps->lock);
+
+ /* Get the current parameters */
+ params = pps->params;
+
+ spin_unlock_irq(&pps->lock);
+
+ err = copy_to_user(uarg, ¶ms, sizeof(struct pps_kparams));
if (err)
return -EFAULT;
return -EIO;
/* are we the last user and permitted to disable ? */
- if (rdev->use_count == 1 && !rdev->constraints->always_on) {
+ if (rdev->use_count == 1 &&
+ (rdev->constraints && !rdev->constraints->always_on)) {
/* we are last user */
if (_regulator_can_change_status(rdev) &&
struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
regulator_unregister(drvdata->dev);
- kfree(drvdata->desc.name);
- kfree(drvdata);
-
if (gpio_is_valid(drvdata->gpio))
gpio_free(drvdata->gpio);
+ kfree(drvdata->desc.name);
+ kfree(drvdata);
return 0;
}
struct wm831x *wm831x = ldo->wm831x;
int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
- unsigned int ret;
+ int ret;
ret = wm831x_reg_read(wm831x, on_reg);
if (ret < 0)
- return 0;
+ return ret;
if (!(ret & WM831X_LDO1_ON_MODE))
return REGULATOR_MODE_NORMAL;
ret = wm831x_reg_read(wm831x, ctrl_reg);
if (ret < 0)
- return 0;
+ return ret;
if (ret & WM831X_LDO1_LP_MODE)
return REGULATOR_MODE_STANDBY;
clk_enable(rtap->clk);
/* Ack IRQ */
writel(1, rtap->virtbase + COH901331_IRQ_EVENT);
+ /*
+ * Disable the interrupt. This is necessary because
+ * the RTC lives on a lower-clocked line and will
+ * not release the IRQ line until after a few (slower)
+ * clock cycles. The interrupt will be re-enabled when
+ * a new alarm is set anyway.
+ */
+ writel(0, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+
/* Set alarm flag */
rtc_update_irq(rtap->rtc, 1, RTC_AF);
else
writel(0, rtap->virtbase + COH901331_IRQ_MASK);
clk_disable(rtap->clk);
+
+ return 0;
}
static struct rtc_class_ops coh901331_ops = {
rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
- rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]);
+ rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1;
rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
}
pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
- pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon);
+ pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1);
pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
}
ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
PCF50633_TI_EXTENT, &pcf_tm.time[0]);
- if (!alarm_masked)
+ if (!alarm_masked || alrm->enabled)
pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+ rtc->alarm_enabled = alrm->enabled;
return ret;
}
static unsigned char v3020_mmio_read_bit(struct v3020 *chip)
{
- return readl(chip->ioaddress) & (1 << chip->leftshift);
+ return !!(readl(chip->ioaddress) & (1 << chip->leftshift));
}
static struct v3020_chip_ops v3020_mmio_ops = {
static int vr41xx_rtc_irq_set_freq(struct device *dev, int freq)
{
- unsigned long count;
+ u64 count;
if (!is_power_of_2(freq))
return -EINVAL;
count = RTC_FREQUENCY;
do_div(count, freq);
- periodic_count = count;
-
spin_lock_irq(&rtc_lock);
- rtc1_write(RTCL1LREG, count);
- rtc1_write(RTCL1HREG, count >> 16);
+ periodic_count = count;
+ rtc1_write(RTCL1LREG, periodic_count);
+ rtc1_write(RTCL1HREG, periodic_count >> 16);
spin_unlock_irq(&rtc_lock);
atomic_set(&monpriv->msglim_count, 0);
monpriv->write_index = 0;
monpriv->read_index = 0;
+ dev_set_drvdata(monreader_device, NULL);
for (i = 0; i < MON_MSGLIM; i++)
kfree(monpriv->msg_array[i]);
#include "sclp.h"
+static void (*old_machine_restart)(char *);
+static void (*old_machine_halt)(void);
+static void (*old_machine_power_off)(void);
+
/* Shutdown handler. Signal completion of shutdown by loading special PSW. */
-static void
-do_machine_quiesce(void)
+static void do_machine_quiesce(void)
{
psw_t quiesce_psw;
}
/* Handler for quiesce event. Start shutdown procedure. */
-static void
-sclp_quiesce_handler(struct evbuf_header *evbuf)
+static void sclp_quiesce_handler(struct evbuf_header *evbuf)
{
- _machine_restart = (void *) do_machine_quiesce;
- _machine_halt = do_machine_quiesce;
- _machine_power_off = do_machine_quiesce;
+ if (_machine_restart != (void *) do_machine_quiesce) {
+ old_machine_restart = _machine_restart;
+ old_machine_halt = _machine_halt;
+ old_machine_power_off = _machine_power_off;
+ _machine_restart = (void *) do_machine_quiesce;
+ _machine_halt = do_machine_quiesce;
+ _machine_power_off = do_machine_quiesce;
+ }
ctrl_alt_del();
}
+/* Undo machine restart/halt/power_off modification on resume */
+static void sclp_quiesce_pm_event(struct sclp_register *reg,
+ enum sclp_pm_event sclp_pm_event)
+{
+ switch (sclp_pm_event) {
+ case SCLP_PM_EVENT_RESTORE:
+ if (old_machine_restart) {
+ _machine_restart = old_machine_restart;
+ _machine_halt = old_machine_halt;
+ _machine_power_off = old_machine_power_off;
+ old_machine_restart = NULL;
+ old_machine_halt = NULL;
+ old_machine_power_off = NULL;
+ }
+ break;
+ case SCLP_PM_EVENT_FREEZE:
+ case SCLP_PM_EVENT_THAW:
+ break;
+ }
+}
+
static struct sclp_register sclp_quiesce_event = {
.receive_mask = EVTYP_SIGQUIESCE_MASK,
- .receiver_fn = sclp_quiesce_handler
+ .receiver_fn = sclp_quiesce_handler,
+ .pm_event_fn = sclp_quiesce_pm_event
};
/* Initialize quiesce driver. */
-static int __init
-sclp_quiesce_init(void)
+static int __init sclp_quiesce_init(void)
{
return sclp_register(&sclp_quiesce_event);
}
#define BFAD_FW_FILE_CT "ctfw.bin"
#define BFAD_FW_FILE_CB "cbfw.bin"
+MODULE_FIRMWARE(BFAD_FW_FILE_CT);
+MODULE_FIRMWARE(BFAD_FW_FILE_CB);
u32 *
bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
if (bfad_supported_fc4s & (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM))
/* For FCP type 0x08 */
fc_host_supported_fc4s(host)[2] = 1;
- if (bfad_supported_fc4s | BFA_PORT_ROLE_FCP_IPFC)
+ if (bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IPFC)
/* For LLC/SNAP type 0x05 */
fc_host_supported_fc4s(host)[3] = 0x20;
/* For fibre channel services type 0x20 */
eindex = handle;
estr->event_source = 0;
- if (eindex >= MAX_EVENTS) {
+ if (eindex < 0 || eindex >= MAX_EVENTS) {
spin_unlock_irqrestore(&ha->smp_lock, flags);
return eindex;
}
return rc;
}
+/**
+ * ipr_isr_eh - Interrupt service routine error handler
+ * @ioa_cfg: ioa config struct
+ * @msg: message to log
+ *
+ * Return value:
+ * none
+ **/
+static void ipr_isr_eh(struct ipr_ioa_cfg *ioa_cfg, char *msg)
+{
+ ioa_cfg->errors_logged++;
+ dev_err(&ioa_cfg->pdev->dev, "%s\n", msg);
+
+ if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
+ ioa_cfg->sdt_state = GET_DUMP;
+
+ ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+}
+
/**
* ipr_isr - Interrupt service routine
* @irq: irq number
volatile u32 int_reg, int_mask_reg;
u32 ioasc;
u16 cmd_index;
+ int num_hrrq = 0;
struct ipr_cmnd *ipr_cmd;
irqreturn_t rc = IRQ_NONE;
IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT;
if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) {
- ioa_cfg->errors_logged++;
- dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n");
-
- if (WAIT_FOR_DUMP == ioa_cfg->sdt_state)
- ioa_cfg->sdt_state = GET_DUMP;
-
- ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
+ ipr_isr_eh(ioa_cfg, "Invalid response handle from IOA");
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return IRQ_HANDLED;
}
if (ipr_cmd != NULL) {
/* Clear the PCI interrupt */
- writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
- int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ do {
+ writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg);
+ int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg;
+ } while (int_reg & IPR_PCII_HRRQ_UPDATED &&
+ num_hrrq++ < IPR_MAX_HRRQ_RETRIES);
+
+ if (int_reg & IPR_PCII_HRRQ_UPDATED) {
+ ipr_isr_eh(ioa_cfg, "Error clearing HRRQ");
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+ return IRQ_HANDLED;
+ }
+
} else
break;
}
#define IPR_IOA_MAX_SECTORS 32767
#define IPR_VSET_MAX_SECTORS 512
#define IPR_MAX_CDB_LEN 16
+#define IPR_MAX_HRRQ_RETRIES 3
#define IPR_DEFAULT_BUS_WIDTH 16
#define IPR_80MBs_SCSI_RATE ((80 * 10) / (IPR_DEFAULT_BUS_WIDTH / 8))
}
}
- res = 0;
}
return res;
ioarcb->data_transfer_length = cpu_to_le32(rcb_size);
- ioadl[0].flags |= cpu_to_le32(IOADL_FLAGS_READ_LAST);
+ ioadl[0].flags |= IOADL_FLAGS_READ_LAST;
ioadl[0].data_len = cpu_to_le32(rcb_size);
ioadl[0].address = cpu_to_le32(dma);
ioadl->address = cpu_to_le64(cmd->sense_buffer_dma);
ioadl->data_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE);
- ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl->flags = IOADL_FLAGS_LAST_DESC;
/* request sense might be called as part of error response processing
* which runs in tasklets context. It is possible that mid-layer might
ioadl[i].flags = 0;
}
/* setup last descriptor */
- ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC;
return 0;
}
}
/* setup the last descriptor */
- ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC;
return 0;
}
cpu_to_le32(sizeof(struct pmcraid_config_table));
ioadl = &(ioarcb->add_data.u.ioadl[0]);
- ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC);
+ ioadl->flags = IOADL_FLAGS_LAST_DESC;
ioadl->address = cpu_to_le64(pinstance->cfg_table_bus_addr);
ioadl->data_len = cpu_to_le32(sizeof(struct pmcraid_config_table));
fail_host_msg:
/* return the errno failure code as the only status */
BUG_ON(job->reply_len < sizeof(uint32_t));
+ job->reply->reply_payload_rcv_len = 0;
job->reply->result = ret;
job->reply_len = sizeof(uint32_t);
fc_bsg_jobdone(job);
fail_rport_msg:
/* return the errno failure code as the only status */
BUG_ON(job->reply_len < sizeof(uint32_t));
+ job->reply->reply_payload_rcv_len = 0;
job->reply->result = ret;
job->reply_len = sizeof(uint32_t);
fc_bsg_jobdone(job);
/* check if we have the msgcode value at least */
if (job->request_len < sizeof(uint32_t)) {
BUG_ON(job->reply_len < sizeof(uint32_t));
+ job->reply->reply_payload_rcv_len = 0;
job->reply->result = -ENOMSG;
job->reply_len = sizeof(uint32_t);
fc_bsg_jobdone(job);
if (!up->port.iobase && !up->port.mapbase && !up->port.membase)
return;
- DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ",
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
serial_index(&up->port), up->port.iobase, up->port.membase);
/*
break;
#ifdef SERIAL_DEBUG_PCI
- printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n",
+ printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
serial_port.iobase, serial_port.irq, serial_port.iotype);
#endif
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_2_115200 },
{ PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_460800 },
static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, },
{ .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
+ { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
{ .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
{ .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, },
while ((sci_in(port, SCxSR) & bits) != bits)
cpu_relax();
- if (sci_port->disable);
+ if (sci_port->disable)
sci_port->disable(port);
}
This enables using the Freescale MPC8xxx SPI controllers in master
mode.
- This driver uses a simple set of shift registers for data (opposed
- to the CPM based descriptor model).
-
config SPI_OMAP_UWIRE
tristate "OMAP1 MicroWire"
depends on ARCH_OMAP1
*
* Copyright (C) 2006 Polycom, Inc.
*
+ * CPM SPI and QE buffer descriptors mode support:
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
#include <linux/spi/spi_bitbang.h>
#include <linux/platform_device.h>
#include <linux/fsl_devices.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/of_spi.h>
#include <sysdev/fsl_soc.h>
+#include <asm/cpm.h>
+#include <asm/qe.h>
#include <asm/irq.h>
+/* CPM1 and CPM2 are mutually exclusive. */
+#ifdef CONFIG_CPM1
+#include <asm/cpm1.h>
+#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_CH_SPI, 0)
+#else
+#include <asm/cpm2.h>
+#define CPM_SPI_CMD mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK, 0, 0)
+#endif
+
/* SPI Controller registers */
struct mpc8xxx_spi_reg {
u8 res1[0x20];
__be32 receive;
};
+/* SPI Parameter RAM */
+struct spi_pram {
+ __be16 rbase; /* Rx Buffer descriptor base address */
+ __be16 tbase; /* Tx Buffer descriptor base address */
+ u8 rfcr; /* Rx function code */
+ u8 tfcr; /* Tx function code */
+ __be16 mrblr; /* Max receive buffer length */
+ __be32 rstate; /* Internal */
+ __be32 rdp; /* Internal */
+ __be16 rbptr; /* Internal */
+ __be16 rbc; /* Internal */
+ __be32 rxtmp; /* Internal */
+ __be32 tstate; /* Internal */
+ __be32 tdp; /* Internal */
+ __be16 tbptr; /* Internal */
+ __be16 tbc; /* Internal */
+ __be32 txtmp; /* Internal */
+ __be32 res; /* Tx temp. */
+ __be16 rpbase; /* Relocation pointer (CPM1 only) */
+ __be16 res1; /* Reserved */
+};
+
/* SPI Controller mode register definitions */
#define SPMODE_LOOP (1 << 30)
#define SPMODE_CI_INACTIVEHIGH (1 << 29)
#define SPIM_NE 0x00000200 /* Not empty */
#define SPIM_NF 0x00000100 /* Not full */
+#define SPIE_TXB 0x00000200 /* Last char is written to tx fifo */
+#define SPIE_RXB 0x00000100 /* Last char is written to rx buf */
+
+/* SPCOM register values */
+#define SPCOM_STR (1 << 23) /* Start transmit */
+
+#define SPI_PRAM_SIZE 0x100
+#define SPI_MRBLR ((unsigned int)PAGE_SIZE)
+
/* SPI Controller driver's private data. */
struct mpc8xxx_spi {
+ struct device *dev;
struct mpc8xxx_spi_reg __iomem *base;
/* rx & tx bufs from the spi_transfer */
const void *tx;
void *rx;
+ int subblock;
+ struct spi_pram __iomem *pram;
+ struct cpm_buf_desc __iomem *tx_bd;
+ struct cpm_buf_desc __iomem *rx_bd;
+
+ struct spi_transfer *xfer_in_progress;
+
+ /* dma addresses for CPM transfers */
+ dma_addr_t tx_dma;
+ dma_addr_t rx_dma;
+ bool map_tx_dma;
+ bool map_rx_dma;
+
+ dma_addr_t dma_dummy_tx;
+ dma_addr_t dma_dummy_rx;
+
/* functions to deal with different sized buffers */
void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
u32(*get_tx) (struct mpc8xxx_spi *);
u32 rx_shift; /* RX data reg shift when in qe mode */
u32 tx_shift; /* TX data reg shift when in qe mode */
- bool qe_mode;
+ unsigned int flags;
struct workqueue_struct *workqueue;
struct work_struct work;
struct completion done;
};
+static void *mpc8xxx_dummy_rx;
+static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock);
+static int mpc8xxx_dummy_rx_refcnt;
+
struct spi_mpc8xxx_cs {
/* functions to deal with different sized buffers */
void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *);
MPC83XX_SPI_TX_BUF(u16)
MPC83XX_SPI_TX_BUF(u32)
+static void mpc8xxx_spi_change_mode(struct spi_device *spi)
+{
+ struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master);
+ struct spi_mpc8xxx_cs *cs = spi->controller_state;
+ __be32 __iomem *mode = &mspi->base->mode;
+ unsigned long flags;
+
+ if (cs->hw_mode == mpc8xxx_spi_read_reg(mode))
+ return;
+
+ /* Turn off IRQs locally to minimize time that SPI is disabled. */
+ local_irq_save(flags);
+
+ /* Turn off SPI unit prior changing mode */
+ mpc8xxx_spi_write_reg(mode, cs->hw_mode & ~SPMODE_ENABLE);
+ mpc8xxx_spi_write_reg(mode, cs->hw_mode);
+
+ /* When in CPM mode, we need to reinit tx and rx. */
+ if (mspi->flags & SPI_CPM_MODE) {
+ if (mspi->flags & SPI_QE) {
+ qe_issue_cmd(QE_INIT_TX_RX, mspi->subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, 0);
+ } else {
+ cpm_command(CPM_SPI_CMD, CPM_CR_INIT_TRX);
+ if (mspi->flags & SPI_CPM1) {
+ out_be16(&mspi->pram->rbptr,
+ in_be16(&mspi->pram->rbase));
+ out_be16(&mspi->pram->tbptr,
+ in_be16(&mspi->pram->tbase));
+ }
+ }
+ }
+
+ local_irq_restore(flags);
+}
+
static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value)
{
struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
}
if (value == BITBANG_CS_ACTIVE) {
- u32 regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
-
mpc8xxx_spi->rx_shift = cs->rx_shift;
mpc8xxx_spi->tx_shift = cs->tx_shift;
mpc8xxx_spi->get_rx = cs->get_rx;
mpc8xxx_spi->get_tx = cs->get_tx;
- if (cs->hw_mode != regval) {
- unsigned long flags;
- __be32 __iomem *mode = &mpc8xxx_spi->base->mode;
-
- regval = cs->hw_mode;
- /* Turn off IRQs locally to minimize time that
- * SPI is disabled
- */
- local_irq_save(flags);
- /* Turn off SPI unit prior changing mode */
- mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
- mpc8xxx_spi_write_reg(mode, regval);
- local_irq_restore(flags);
- }
+ mpc8xxx_spi_change_mode(spi);
+
if (pdata->cs_control)
pdata->cs_control(spi, pol);
}
int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
{
struct mpc8xxx_spi *mpc8xxx_spi;
- u32 regval;
u8 bits_per_word, pm;
u32 hz;
struct spi_mpc8xxx_cs *cs = spi->controller_state;
if (bits_per_word <= 8) {
cs->get_rx = mpc8xxx_spi_rx_buf_u8;
cs->get_tx = mpc8xxx_spi_tx_buf_u8;
- if (mpc8xxx_spi->qe_mode) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
cs->rx_shift = 16;
cs->tx_shift = 24;
}
} else if (bits_per_word <= 16) {
cs->get_rx = mpc8xxx_spi_rx_buf_u16;
cs->get_tx = mpc8xxx_spi_tx_buf_u16;
- if (mpc8xxx_spi->qe_mode) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
cs->rx_shift = 16;
cs->tx_shift = 16;
}
} else
return -EINVAL;
- if (mpc8xxx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE &&
+ spi->mode & SPI_LSB_FIRST) {
cs->tx_shift = 0;
if (bits_per_word <= 8)
cs->rx_shift = 8;
pm--;
cs->hw_mode |= SPMODE_PM(pm);
- regval = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode);
- if (cs->hw_mode != regval) {
- unsigned long flags;
- __be32 __iomem *mode = &mpc8xxx_spi->base->mode;
-
- regval = cs->hw_mode;
- /* Turn off IRQs locally to minimize time
- * that SPI is disabled
- */
- local_irq_save(flags);
- /* Turn off SPI unit prior changing mode */
- mpc8xxx_spi_write_reg(mode, regval & ~SPMODE_ENABLE);
- mpc8xxx_spi_write_reg(mode, regval);
- local_irq_restore(flags);
+
+ mpc8xxx_spi_change_mode(spi);
+ return 0;
+}
+
+static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi)
+{
+ struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd;
+ struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd;
+ unsigned int xfer_len = min(mspi->count, SPI_MRBLR);
+ unsigned int xfer_ofs;
+
+ xfer_ofs = mspi->xfer_in_progress->len - mspi->count;
+
+ out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
+ out_be16(&rx_bd->cbd_datlen, 0);
+ out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP);
+
+ out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
+ out_be16(&tx_bd->cbd_datlen, xfer_len);
+ out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP |
+ BD_SC_LAST);
+
+ /* start transfer */
+ mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR);
+}
+
+static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi,
+ struct spi_transfer *t, bool is_dma_mapped)
+{
+ struct device *dev = mspi->dev;
+
+ if (is_dma_mapped) {
+ mspi->map_tx_dma = 0;
+ mspi->map_rx_dma = 0;
+ } else {
+ mspi->map_tx_dma = 1;
+ mspi->map_rx_dma = 1;
+ }
+
+ if (!t->tx_buf) {
+ mspi->tx_dma = mspi->dma_dummy_tx;
+ mspi->map_tx_dma = 0;
+ }
+
+ if (!t->rx_buf) {
+ mspi->rx_dma = mspi->dma_dummy_rx;
+ mspi->map_rx_dma = 0;
}
+
+ if (mspi->map_tx_dma) {
+ void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */
+
+ mspi->tx_dma = dma_map_single(dev, nonconst_tx, t->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, mspi->tx_dma)) {
+ dev_err(dev, "unable to map tx dma\n");
+ return -ENOMEM;
+ }
+ } else {
+ mspi->tx_dma = t->tx_dma;
+ }
+
+ if (mspi->map_rx_dma) {
+ mspi->rx_dma = dma_map_single(dev, mspi->rx, t->len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, mspi->rx_dma)) {
+ dev_err(dev, "unable to map rx dma\n");
+ goto err_rx_dma;
+ }
+ } else {
+ mspi->rx_dma = t->rx_dma;
+ }
+
+ /* enable rx ints */
+ mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB);
+
+ mspi->xfer_in_progress = t;
+ mspi->count = t->len;
+
+ /* start CPM transfers */
+ mpc8xxx_spi_cpm_bufs_start(mspi);
+
return 0;
+
+err_rx_dma:
+ if (mspi->map_tx_dma)
+ dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE);
+ return -ENOMEM;
}
-static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi)
{
- struct mpc8xxx_spi *mpc8xxx_spi;
- u32 word, len, bits_per_word;
+ struct device *dev = mspi->dev;
+ struct spi_transfer *t = mspi->xfer_in_progress;
+
+ if (mspi->map_tx_dma)
+ dma_unmap_single(dev, mspi->tx_dma, t->len, DMA_TO_DEVICE);
+ if (mspi->map_tx_dma)
+ dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE);
+ mspi->xfer_in_progress = NULL;
+}
- mpc8xxx_spi = spi_master_get_devdata(spi->master);
+static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi,
+ struct spi_transfer *t, unsigned int len)
+{
+ u32 word;
+
+ mspi->count = len;
+
+ /* enable rx ints */
+ mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE);
+
+ /* transmit word */
+ word = mspi->get_tx(mspi);
+ mpc8xxx_spi_write_reg(&mspi->base->transmit, word);
+
+ return 0;
+}
+
+static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t,
+ bool is_dma_mapped)
+{
+ struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master);
+ unsigned int len = t->len;
+ u8 bits_per_word;
+ int ret;
- mpc8xxx_spi->tx = t->tx_buf;
- mpc8xxx_spi->rx = t->rx_buf;
bits_per_word = spi->bits_per_word;
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
- len = t->len;
+
if (bits_per_word > 8) {
/* invalid length? */
if (len & 1)
return -EINVAL;
len /= 2;
}
- mpc8xxx_spi->count = len;
- INIT_COMPLETION(mpc8xxx_spi->done);
+ mpc8xxx_spi->tx = t->tx_buf;
+ mpc8xxx_spi->rx = t->rx_buf;
- /* enable rx ints */
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, SPIM_NE);
+ INIT_COMPLETION(mpc8xxx_spi->done);
- /* transmit word */
- word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->transmit, word);
+ if (mpc8xxx_spi->flags & SPI_CPM_MODE)
+ ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped);
+ else
+ ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len);
+ if (ret)
+ return ret;
wait_for_completion(&mpc8xxx_spi->done);
/* disable rx ints */
mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0);
+ if (mpc8xxx_spi->flags & SPI_CPM_MODE)
+ mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi);
+
return mpc8xxx_spi->count;
}
}
cs_change = t->cs_change;
if (t->len)
- status = mpc8xxx_spi_bufs(spi, t);
+ status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped);
if (status) {
status = -EMSGSIZE;
break;
return 0;
}
-static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data)
+static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events)
{
- struct mpc8xxx_spi *mpc8xxx_spi = context_data;
- u32 event;
- irqreturn_t ret = IRQ_NONE;
+ u16 len;
- /* Get interrupt events(tx/rx) */
- event = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->event);
+ dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__,
+ in_be16(&mspi->rx_bd->cbd_datlen), mspi->count);
- /* We need handle RX first */
- if (event & SPIE_NE) {
- u32 rx_data = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->receive);
+ len = in_be16(&mspi->rx_bd->cbd_datlen);
+ if (len > mspi->count) {
+ WARN_ON(1);
+ len = mspi->count;
+ }
- if (mpc8xxx_spi->rx)
- mpc8xxx_spi->get_rx(rx_data, mpc8xxx_spi);
+ /* Clear the events */
+ mpc8xxx_spi_write_reg(&mspi->base->event, events);
- ret = IRQ_HANDLED;
+ mspi->count -= len;
+ if (mspi->count)
+ mpc8xxx_spi_cpm_bufs_start(mspi);
+ else
+ complete(&mspi->done);
+}
+
+static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
+{
+ /* We need handle RX first */
+ if (events & SPIE_NE) {
+ u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive);
+
+ if (mspi->rx)
+ mspi->get_rx(rx_data, mspi);
}
- if ((event & SPIE_NF) == 0)
+ if ((events & SPIE_NF) == 0)
/* spin until TX is done */
- while (((event =
- mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->event)) &
+ while (((events =
+ mpc8xxx_spi_read_reg(&mspi->base->event)) &
SPIE_NF) == 0)
cpu_relax();
- mpc8xxx_spi->count -= 1;
- if (mpc8xxx_spi->count) {
- u32 word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->transmit, word);
+ /* Clear the events */
+ mpc8xxx_spi_write_reg(&mspi->base->event, events);
+
+ mspi->count -= 1;
+ if (mspi->count) {
+ u32 word = mspi->get_tx(mspi);
+
+ mpc8xxx_spi_write_reg(&mspi->base->transmit, word);
} else {
- complete(&mpc8xxx_spi->done);
+ complete(&mspi->done);
}
+}
- /* Clear the events */
- mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, event);
+static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data)
+{
+ struct mpc8xxx_spi *mspi = context_data;
+ irqreturn_t ret = IRQ_NONE;
+ u32 events;
+
+ /* Get interrupt events(tx/rx) */
+ events = mpc8xxx_spi_read_reg(&mspi->base->event);
+ if (events)
+ ret = IRQ_HANDLED;
+
+ dev_dbg(mspi->dev, "%s: events %x\n", __func__, events);
+
+ if (mspi->flags & SPI_CPM_MODE)
+ mpc8xxx_spi_cpm_irq(mspi, events);
+ else
+ mpc8xxx_spi_cpu_irq(mspi, events);
return ret;
}
+
static int mpc8xxx_spi_transfer(struct spi_device *spi,
struct spi_message *m)
{
kfree(spi->controller_state);
}
+static void *mpc8xxx_spi_alloc_dummy_rx(void)
+{
+ mutex_lock(&mpc8xxx_dummy_rx_lock);
+
+ if (!mpc8xxx_dummy_rx)
+ mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL);
+ if (mpc8xxx_dummy_rx)
+ mpc8xxx_dummy_rx_refcnt++;
+
+ mutex_unlock(&mpc8xxx_dummy_rx_lock);
+
+ return mpc8xxx_dummy_rx;
+}
+
+static void mpc8xxx_spi_free_dummy_rx(void)
+{
+ mutex_lock(&mpc8xxx_dummy_rx_lock);
+
+ switch (mpc8xxx_dummy_rx_refcnt) {
+ case 0:
+ WARN_ON(1);
+ break;
+ case 1:
+ kfree(mpc8xxx_dummy_rx);
+ mpc8xxx_dummy_rx = NULL;
+ /* fall through */
+ default:
+ mpc8xxx_dummy_rx_refcnt--;
+ break;
+ }
+
+ mutex_unlock(&mpc8xxx_dummy_rx_lock);
+}
+
+static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
+{
+ struct device *dev = mspi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ const u32 *iprop;
+ int size;
+ unsigned long spi_base_ofs;
+ unsigned long pram_ofs = -ENOMEM;
+
+ /* Can't use of_address_to_resource(), QE muram isn't at 0. */
+ iprop = of_get_property(np, "reg", &size);
+
+ /* QE with a fixed pram location? */
+ if (mspi->flags & SPI_QE && iprop && size == sizeof(*iprop) * 4)
+ return cpm_muram_alloc_fixed(iprop[2], SPI_PRAM_SIZE);
+
+ /* QE but with a dynamic pram location? */
+ if (mspi->flags & SPI_QE) {
+ pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, mspi->subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, pram_ofs);
+ return pram_ofs;
+ }
+
+ /* CPM1 and CPM2 pram must be at a fixed addr. */
+ if (!iprop || size != sizeof(*iprop) * 4)
+ return -ENOMEM;
+
+ spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2);
+ if (IS_ERR_VALUE(spi_base_ofs))
+ return -ENOMEM;
+
+ if (mspi->flags & SPI_CPM2) {
+ pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
+ if (!IS_ERR_VALUE(pram_ofs)) {
+ u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs);
+
+ out_be16(spi_base, pram_ofs);
+ }
+ } else {
+ struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs);
+ u16 rpbase = in_be16(&pram->rpbase);
+
+ /* Microcode relocation patch applied? */
+ if (rpbase)
+ pram_ofs = rpbase;
+ else
+ return spi_base_ofs;
+ }
+
+ cpm_muram_free(spi_base_ofs);
+ return pram_ofs;
+}
+
+static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi)
+{
+ struct device *dev = mspi->dev;
+ struct device_node *np = dev_archdata_get_node(&dev->archdata);
+ const u32 *iprop;
+ int size;
+ unsigned long pram_ofs;
+ unsigned long bds_ofs;
+
+ if (!(mspi->flags & SPI_CPM_MODE))
+ return 0;
+
+ if (!mpc8xxx_spi_alloc_dummy_rx())
+ return -ENOMEM;
+
+ if (mspi->flags & SPI_QE) {
+ iprop = of_get_property(np, "cell-index", &size);
+ if (iprop && size == sizeof(*iprop))
+ mspi->subblock = *iprop;
+
+ switch (mspi->subblock) {
+ default:
+ dev_warn(dev, "cell-index unspecified, assuming SPI1");
+ /* fall through */
+ case 0:
+ mspi->subblock = QE_CR_SUBBLOCK_SPI1;
+ break;
+ case 1:
+ mspi->subblock = QE_CR_SUBBLOCK_SPI2;
+ break;
+ }
+ }
+
+ pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi);
+ if (IS_ERR_VALUE(pram_ofs)) {
+ dev_err(dev, "can't allocate spi parameter ram\n");
+ goto err_pram;
+ }
+
+ bds_ofs = cpm_muram_alloc(sizeof(*mspi->tx_bd) +
+ sizeof(*mspi->rx_bd), 8);
+ if (IS_ERR_VALUE(bds_ofs)) {
+ dev_err(dev, "can't allocate bds\n");
+ goto err_bds;
+ }
+
+ mspi->dma_dummy_tx = dma_map_single(dev, empty_zero_page, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, mspi->dma_dummy_tx)) {
+ dev_err(dev, "unable to map dummy tx buffer\n");
+ goto err_dummy_tx;
+ }
+
+ mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, mspi->dma_dummy_rx)) {
+ dev_err(dev, "unable to map dummy rx buffer\n");
+ goto err_dummy_rx;
+ }
+
+ mspi->pram = cpm_muram_addr(pram_ofs);
+
+ mspi->tx_bd = cpm_muram_addr(bds_ofs);
+ mspi->rx_bd = cpm_muram_addr(bds_ofs + sizeof(*mspi->tx_bd));
+
+ /* Initialize parameter ram. */
+ out_be16(&mspi->pram->tbase, cpm_muram_offset(mspi->tx_bd));
+ out_be16(&mspi->pram->rbase, cpm_muram_offset(mspi->rx_bd));
+ out_8(&mspi->pram->tfcr, CPMFCR_EB | CPMFCR_GBL);
+ out_8(&mspi->pram->rfcr, CPMFCR_EB | CPMFCR_GBL);
+ out_be16(&mspi->pram->mrblr, SPI_MRBLR);
+ out_be32(&mspi->pram->rstate, 0);
+ out_be32(&mspi->pram->rdp, 0);
+ out_be16(&mspi->pram->rbptr, 0);
+ out_be16(&mspi->pram->rbc, 0);
+ out_be32(&mspi->pram->rxtmp, 0);
+ out_be32(&mspi->pram->tstate, 0);
+ out_be32(&mspi->pram->tdp, 0);
+ out_be16(&mspi->pram->tbptr, 0);
+ out_be16(&mspi->pram->tbc, 0);
+ out_be32(&mspi->pram->txtmp, 0);
+
+ return 0;
+
+err_dummy_rx:
+ dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
+err_dummy_tx:
+ cpm_muram_free(bds_ofs);
+err_bds:
+ cpm_muram_free(pram_ofs);
+err_pram:
+ mpc8xxx_spi_free_dummy_rx();
+ return -ENOMEM;
+}
+
+static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi)
+{
+ struct device *dev = mspi->dev;
+
+ dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE);
+ dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
+ cpm_muram_free(cpm_muram_offset(mspi->tx_bd));
+ cpm_muram_free(cpm_muram_offset(mspi->pram));
+ mpc8xxx_spi_free_dummy_rx();
+}
+
+static const char *mpc8xxx_spi_strmode(unsigned int flags)
+{
+ if (flags & SPI_QE_CPU_MODE) {
+ return "QE CPU";
+ } else if (flags & SPI_CPM_MODE) {
+ if (flags & SPI_QE)
+ return "QE";
+ else if (flags & SPI_CPM2)
+ return "CPM2";
+ else
+ return "CPM1";
+ }
+ return "CPU";
+}
+
static struct spi_master * __devinit
mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq)
{
master->cleanup = mpc8xxx_spi_cleanup;
mpc8xxx_spi = spi_master_get_devdata(master);
- mpc8xxx_spi->qe_mode = pdata->qe_mode;
+ mpc8xxx_spi->dev = dev;
mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8;
mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8;
+ mpc8xxx_spi->flags = pdata->flags;
mpc8xxx_spi->spibrg = pdata->sysclk;
+ ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi);
+ if (ret)
+ goto err_cpm_init;
+
mpc8xxx_spi->rx_shift = 0;
mpc8xxx_spi->tx_shift = 0;
- if (mpc8xxx_spi->qe_mode) {
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) {
mpc8xxx_spi->rx_shift = 16;
mpc8xxx_spi->tx_shift = 24;
}
mpc8xxx_spi->base = ioremap(mem->start, mem->end - mem->start + 1);
if (mpc8xxx_spi->base == NULL) {
ret = -ENOMEM;
- goto put_master;
+ goto err_ioremap;
}
mpc8xxx_spi->irq = irq;
/* Enable SPI interface */
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
- if (pdata->qe_mode)
+ if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE)
regval |= SPMODE_OP;
mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval);
if (ret < 0)
goto unreg_master;
- printk(KERN_INFO
- "%s: MPC8xxx SPI Controller driver at 0x%p (irq = %d)\n",
- dev_name(dev), mpc8xxx_spi->base, mpc8xxx_spi->irq);
+ dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base,
+ mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags));
return master;
free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
unmap_io:
iounmap(mpc8xxx_spi->base);
-put_master:
+err_ioremap:
+ mpc8xxx_spi_cpm_free(mpc8xxx_spi);
+err_cpm_init:
spi_master_put(master);
err:
return ERR_PTR(ret);
free_irq(mpc8xxx_spi->irq, mpc8xxx_spi);
iounmap(mpc8xxx_spi->base);
+ mpc8xxx_spi_cpm_free(mpc8xxx_spi);
return 0;
}
gpio = of_get_gpio_flags(np, i, &flags);
if (!gpio_is_valid(gpio)) {
dev_err(dev, "invalid gpio #%d: %d\n", i, gpio);
+ ret = gpio;
goto err_loop;
}
prop = of_get_property(np, "mode", NULL);
if (prop && !strcmp(prop, "cpu-qe"))
- pdata->qe_mode = 1;
+ pdata->flags = SPI_QE_CPU_MODE;
+ else if (prop && !strcmp(prop, "qe"))
+ pdata->flags = SPI_CPM_MODE | SPI_QE;
+ else if (of_device_is_compatible(np, "fsl,cpm2-spi"))
+ pdata->flags = SPI_CPM_MODE | SPI_CPM2;
+ else if (of_device_is_compatible(np, "fsl,cpm1-spi"))
+ pdata->flags = SPI_CPM_MODE | SPI_CPM1;
ret = of_mpc8xxx_spi_get_chipselects(dev);
if (ret)
wait_for_completion(&ss->done);
if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN))
- status = ETIMEDOUT;
+ status = -ETIMEDOUT;
if (!dma_buf)
dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir);
static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
u16 offset)
{
+ u32 lo, hi;
+
switch (bus->bustype) {
case SSB_BUSTYPE_SSB:
offset += current_coreidx * SSB_CORE_SIZE;
offset -= 0x800;
} else
ssb_pcmcia_switch_segment(bus, 0);
- break;
+ lo = readw(bus->mmio + offset);
+ hi = readw(bus->mmio + offset + 2);
+ return lo | (hi << 16);
case SSB_BUSTYPE_SDIO:
offset += current_coreidx * SSB_CORE_SIZE;
return ssb_sdio_scan_read32(bus, offset);
switch (type) {
case THERMAL_TRIP_CRITICAL:
- return sprintf(buf, "critical");
+ return sprintf(buf, "critical\n");
case THERMAL_TRIP_HOT:
- return sprintf(buf, "hot");
+ return sprintf(buf, "hot\n");
case THERMAL_TRIP_PASSIVE:
- return sprintf(buf, "passive");
+ return sprintf(buf, "passive\n");
case THERMAL_TRIP_ACTIVE:
- return sprintf(buf, "active");
+ return sprintf(buf, "active\n");
default:
- return sprintf(buf, "unknown");
+ return sprintf(buf, "unknown\n");
}
}
return 0;
bad1:
kfree(priv);
+ pm_runtime_disable(&pdev->dev);
bad0:
return ret;
}
acm->throttle = 0;
- tasklet_schedule(&acm->urb_task);
set_bit(ASYNCB_INITIALIZED, &acm->port.flags);
rv = tty_port_block_til_ready(&acm->port, tty, filp);
+ tasklet_schedule(&acm->urb_task);
done:
mutex_unlock(&acm->mutex);
err_out:
/* Perform the closing process and see if we need to do the hardware
shutdown */
- if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0)
+ if (!acm)
+ return;
+ if (tty_port_close_start(&acm->port, tty, filp) == 0) {
+ mutex_lock(&open_mutex);
+ if (!acm->dev) {
+ tty_port_tty_set(&acm->port, NULL);
+ acm_tty_unregister(acm);
+ tty->driver_data = NULL;
+ }
+ mutex_unlock(&open_mutex);
return;
+ }
acm_port_down(acm, 0);
tty_port_close_end(&acm->port, tty);
- mutex_lock(&open_mutex);
tty_port_tty_set(&acm->port, NULL);
- if (!acm->dev)
- acm_tty_unregister(acm);
- mutex_unlock(&open_mutex);
}
static int acm_tty_write(struct tty_struct *tty,
#define CPM_USB_RESTART_TX_OPCODE 0x0b
#define CPM_USB_EP_SHIFT 5
-#ifndef CONFIG_CPM
-inline int cpm_command(u32 command, u8 opcode)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
-#ifndef CONFIG_QUICC_ENGINE
-inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol,
- u32 cmd_input)
-{
- return -EOPNOTSUPP;
-}
-#endif
-
#endif /* __FSL_QE_UDC_H */
#ifdef CONFIG_PCI
static void quirk_amd_pll(int state);
static void amd_iso_dev_put(void);
+static void sb800_prefetch(struct ohci_hcd *ohci, int on);
#else
static inline void quirk_amd_pll(int state)
{
{
return;
}
+static inline void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ return;
+}
#endif
return 0;
pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+
+ /* SB800 needs pre-fetch fix */
+ if ((rev >= 0x40) && (rev <= 0x4f)) {
+ ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
+ ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
+ }
+
if ((rev > 0x3b) || (rev < 0x30)) {
pci_dev_put(amd_smbus_dev);
amd_smbus_dev = NULL;
}
+static void sb800_prefetch(struct ohci_hcd *ohci, int on)
+{
+ struct pci_dev *pdev;
+ u16 misc;
+
+ pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
+ pci_read_config_word(pdev, 0x50, &misc);
+ if (on == 0)
+ pci_write_config_word(pdev, 0x50, misc & 0xfcff);
+ else
+ pci_write_config_word(pdev, 0x50, misc | 0x0300);
+}
+
/* List of quirks for OHCI */
static const struct pci_device_id ohci_pci_quirks[] = {
{
switch (usb_pipetype (urb->pipe)) {
case PIPE_ISOCHRONOUS:
ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
- if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
- && quirk_amdiso(ohci))
- quirk_amd_pll(1);
+ if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
+ if (quirk_amdiso(ohci))
+ quirk_amd_pll(1);
+ if (quirk_amdprefetch(ohci))
+ sb800_prefetch(ohci, 0);
+ }
break;
case PIPE_INTERRUPT:
ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
data + urb->iso_frame_desc [cnt].offset,
urb->iso_frame_desc [cnt].length, urb, cnt);
}
- if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
- && quirk_amdiso(ohci))
- quirk_amd_pll(0);
+ if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
+ if (quirk_amdiso(ohci))
+ quirk_amd_pll(0);
+ if (quirk_amdprefetch(ohci))
+ sb800_prefetch(ohci, 1);
+ }
periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
break;
#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
#define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/
+#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
// there are also chip quirks/bugs in init logic
struct work_struct nec_work; /* Worker for NEC quirk */
{
return ohci->flags & OHCI_QUIRK_AMD_ISO;
}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+ return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
+}
#else
static inline int quirk_nec(struct ohci_hcd *ohci)
{
{
return 0;
}
+static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
+{
+ return 0;
+}
#endif
/* convert between an hcd pointer and the corresponding ohci_hcd */
int i;
/* Free the Event Ring Segment Table and the actual Event Ring */
- xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
- xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
+ if (xhci->ir_set) {
+ xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
+ }
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
xhci->dcbaa, xhci->dcbaa->dma);
xhci->dcbaa = NULL;
+ scratchpad_free(xhci);
xhci->page_size = 0;
xhci->page_shift = 0;
- scratchpad_free(xhci);
}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
cur_seg = start_seg;
do {
+ if (start_dma == 0)
+ return 0;
/* We may get an event for a Link TRB in the middle of a TD */
end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
- &start_seg->trbs[TRBS_PER_SEGMENT - 1]);
+ &cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
/* If the end TRB isn't in this segment, this is set to 0 */
end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
}
cur_seg = cur_seg->next;
start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
- } while (1);
+ } while (cur_seg != start_seg);
+ return 0;
}
/*
/*
* Return a few (kilo-)bytes to the head of the buffer.
- * This is used if a DMA fetch fails.
+ * This is used if a data fetch fails.
*/
static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size)
{
- size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ /* size &= ~(PKT_ALIGN-1); -- we're called with aligned size */
rp->b_cnt -= size;
if (rp->b_in < size)
rp->b_in += rp->b_size;
unsigned int urb_length;
unsigned int offset;
unsigned int length;
+ unsigned int delta;
unsigned int ndesc, lendesc;
unsigned char dir;
struct mon_bin_hdr *ep;
if (length != 0) {
ep->flag_data = mon_bin_get_data(rp, offset, urb, length);
if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */
- ep->len_cap = 0;
- mon_buff_area_shrink(rp, length);
+ delta = (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ ep->len_cap -= length;
+ delta -= (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ mon_buff_area_shrink(rp, delta);
}
} else {
ep->flag_data = data_tag;
static void cp210x_break_ctl(struct tty_struct *, int);
static int cp210x_startup(struct usb_serial *);
static void cp210x_disconnect(struct usb_serial *);
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
+static int cp210x_carrier_raised(struct usb_serial_port *p);
static int debug;
.tiocmset = cp210x_tiocmset,
.attach = cp210x_startup,
.disconnect = cp210x_disconnect,
+ .dtr_rts = cp210x_dtr_rts,
+ .carrier_raised = cp210x_carrier_raised
};
/* Config request types */
return cp210x_set_config(port, CP210X_SET_MHS, &control, 2);
}
+static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
+{
+ if (on)
+ cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0);
+ else
+ cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS);
+}
+
static int cp210x_tiocmget (struct tty_struct *tty, struct file *file)
{
struct usb_serial_port *port = tty->driver_data;
return result;
}
+static int cp210x_carrier_raised(struct usb_serial_port *p)
+{
+ unsigned int control;
+ cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1);
+ if (control & CONTROL_DCD)
+ return 1;
+ return 0;
+}
+
static void cp210x_break_ctl (struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
#define DLINK_VENDOR_ID 0x1186
#define DLINK_PRODUCT_DWM_652 0x3e04
+#define DLINK_PRODUCT_DWM_652_U5 0xce16
#define QISDA_VENDOR_ID 0x1da5
#define QISDA_PRODUCT_H21_4512 0x4512
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
+ { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
config FB_PRE_INIT_FB
bool "Don't reinitialize, use bootloader's GDC/Display configuration"
- depends on FB_MB862XX_LIME
+ depends on FB && FB_MB862XX_LIME
---help---
Select this option if display contents should be inherited as set by
the bootloader.
*
* * perform fb specific mmap *
* int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma);
- *
- * * save current hardware state *
- * void (*fb_save_state)(struct fb_info *info);
- *
- * * restore saved state *
- * void (*fb_restore_state)(struct fb_info *info);
* } ;
*/
unsigned long value;
unsigned long clk_value_khz;
unsigned long bits_per_line;
+ unsigned long pix_factor = 2;
might_sleep();
/* Now, the LCDC core... */
/* Set pixel clock */
+ if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es())
+ pix_factor = 1;
+
clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
- if (value < 2) {
+ if (value < pix_factor) {
dev_notice(info->device, "Bypassing pixel clock divider\n");
lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
} else {
- value = (value / 2) - 1;
+ value = (value / pix_factor) - 1;
dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n",
value);
lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
value << ATMEL_LCDC_CLKVAL_OFFSET);
- info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
+ info->var.pixclock =
+ KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1)));
dev_dbg(info->device, " updated pixclk: %lu KHz\n",
PICOS2KHZ(info->var.pixclock));
}
if (corgibl_flags & CORGIBL_SUSPENDED)
intensity = 0;
- if (corgibl_flags & CORGIBL_BATTLOW)
- intensity &= lcd->limit_mask;
+
+ if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask)
+ intensity = lcd->limit_mask;
return corgi_bl_set_intensity(lcd, intensity);
}
static int lcd_register_fb(struct lcd_device *ld)
{
- memset(&ld->fb_notif, 0, sizeof(&ld->fb_notif));
+ memset(&ld->fb_notif, 0, sizeof(ld->fb_notif));
ld->fb_notif.notifier_call = fb_notifier_callback;
return fb_register_client(&ld->fb_notif);
}
ops->graphics = 1;
if (!blank) {
- if (info->fbops->fb_save_state)
- info->fbops->fb_save_state(info);
var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE;
fb_set_var(info, &var);
ops->graphics = 0;
ops->var = info->var;
- } else if (info->fbops->fb_restore_state)
- info->fbops->fb_restore_state(info);
+ }
}
if (!fbcon_is_inactive(vc, info)) {
if (i == ARRAY_SIZE(known_lcd_panels)) {
dev_err(&device->dev, "GLCD: No valid panel found\n");
- ret = ENODEV;
+ ret = -ENODEV;
goto err_clk_disable;
} else
dev_info(&device->dev, "GLCD: Found %s panel\n",
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <mach/msm_iomap.h>
#include <mach/irqs.h>
#include <mach/board.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/gpio.h>
#include <mach/msm_fb.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/sched.h>
#include <mach/msm_fb.h>
#include <linux/wait.h>
#include <linux/clk.h>
#include <linux/file.h>
-#ifdef CONFIG_ANDROID_PMEM
-#include <linux/android_pmem.h>
-#endif
#include <linux/major.h>
#include <mach/msm_iomap.h>
struct file *file;
unsigned long vstart;
-#ifdef CONFIG_ANDROID_PMEM
- if (!get_pmem_file(img->memory_id, start, &vstart, len, filep))
- return 0;
-#endif
-
file = fget_light(img->memory_id, &put_needed);
if (file == NULL)
return -1;
void put_img(struct file *src_file, struct file *dst_file)
{
-#ifdef CONFIG_ANDROID_PMEM
- if (src_file)
- put_pmem_file(src_file);
- if (dst_file)
- put_pmem_file(dst_file);
-#endif
}
int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb,
if (unlikely(get_img(&req->dst, fb, &dst_start, &dst_len, &dst_file))) {
printk(KERN_ERR "mpd_ppp: could not retrieve dst image from "
"memory\n");
-#ifdef CONFIG_ANDROID_PMEM
- put_pmem_file(src_file);
-#endif
return -EINVAL;
}
mutex_lock(&mdp_mutex);
/* register mdp device */
mdp->mdp_dev.dev.parent = &pdev->dev;
mdp->mdp_dev.dev.class = mdp_class;
- snprintf(mdp->mdp_dev.dev.bus_id, BUS_ID_SIZE, "mdp%d", pdev->id);
/* if you can remove the platform device you'd have to implement
* this:
#include <linux/file.h>
#include <linux/delay.h>
#include <linux/msm_mdp.h>
-#include <linux/android_pmem.h>
#include <mach/msm_fb.h>
#include "mdp_hw.h"
static void flush_imgs(struct mdp_blit_req *req, struct mdp_regs *regs,
struct file *src_file, struct file *dst_file)
{
-#ifdef CONFIG_ANDROID_PMEM
- uint32_t src0_len, src1_len, dst0_len, dst1_len;
-
- /* flush src images to memory before dma to mdp */
- get_len(&req->src, &req->src_rect, regs->src_bpp, &src0_len,
- &src1_len);
- flush_pmem_file(src_file, req->src.offset, src0_len);
- if (IS_PSEUDOPLNR(req->src.format))
- flush_pmem_file(src_file, req->src.offset + src0_len,
- src1_len);
-
- /* flush dst images */
- get_len(&req->dst, &req->dst_rect, regs->dst_bpp, &dst0_len,
- &dst1_len);
- flush_pmem_file(dst_file, req->dst.offset, dst0_len);
- if (IS_PSEUDOPLNR(req->dst.format))
- flush_pmem_file(dst_file, req->dst.offset + dst0_len,
- dst1_len);
-#endif
}
static void get_chroma_addr(struct mdp_img *img, struct mdp_rect *rect,
return 0;
}
+static void offb_destroy(struct fb_info *info)
+{
+ if (info->screen_base)
+ iounmap(info->screen_base);
+ release_mem_region(info->aperture_base, info->aperture_size);
+ framebuffer_release(info);
+}
+
static struct fb_ops offb_ops = {
.owner = THIS_MODULE,
+ .fb_destroy = offb_destroy,
.fb_setcolreg = offb_setcolreg,
.fb_set_par = offb_set_par,
.fb_blank = offb_blank,
var->sync = 0;
var->vmode = FB_VMODE_NONINTERLACED;
+ /* set offb aperture size for generic probing */
+ info->aperture_base = address;
+ info->aperture_size = fix->smem_len;
+
info->fbops = &offb_ops;
info->screen_base = ioremap(address, fix->smem_len);
info->pseudo_palette = (void *) (info + 1);
- info->flags = FBINFO_DEFAULT | foreign_endian;
+ info->flags = FBINFO_DEFAULT | FBINFO_MISC_FIRMWARE | foreign_endian;
fb_alloc_cmap(&info->cmap, 256, 0);
vga_out8(0x3c5, sr8, par);
vga_out8(0x3c4, 0x0d, par);
srd = vga_in8(0x3c5, par);
- srd &= 0x03;
+ srd &= 0x50;
switch (blank) {
case FB_BLANK_UNBLANK:
return (blank == FB_BLANK_NORMAL) ? 1 : 0;
}
-static void savagefb_save_state(struct fb_info *info)
-{
- struct savagefb_par *par = info->par;
-
- savage_get_default_par(par, &par->save);
-}
-
-static void savagefb_restore_state(struct fb_info *info)
-{
- struct savagefb_par *par = info->par;
-
- savagefb_blank(FB_BLANK_POWERDOWN, info);
- savage_set_default_par(par, &par->save);
- savagefb_blank(FB_BLANK_UNBLANK, info);
-}
-
static int savagefb_open(struct fb_info *info, int user)
{
struct savagefb_par *par = info->par;
.fb_setcolreg = savagefb_setcolreg,
.fb_pan_display = savagefb_pan_display,
.fb_blank = savagefb_blank,
- .fb_save_state = savagefb_save_state,
- .fb_restore_state = savagefb_restore_state,
#if defined(CONFIG_FB_SAVAGE_ACCEL)
.fb_fillrect = savagefb_fillrect,
.fb_copyarea = savagefb_copyarea,
return 0;
}
-static void uvesafb_save_state(struct fb_info *info)
-{
- struct uvesafb_par *par = info->par;
-
- if (par->vbe_state_saved)
- kfree(par->vbe_state_saved);
-
- par->vbe_state_saved = uvesafb_vbe_state_save(par);
-}
-
-static void uvesafb_restore_state(struct fb_info *info)
-{
- struct uvesafb_par *par = info->par;
-
- uvesafb_vbe_state_restore(par, par->vbe_state_saved);
-}
-
static struct fb_ops uvesafb_ops = {
.owner = THIS_MODULE,
.fb_open = uvesafb_open,
.fb_imageblit = cfb_imageblit,
.fb_check_var = uvesafb_check_var,
.fb_set_par = uvesafb_set_par,
- .fb_save_state = uvesafb_save_state,
- .fb_restore_state = uvesafb_restore_state,
};
static void __devinit uvesafb_init_info(struct fb_info *info,
info->fix.ypanstep = par->ypan ? 1 : 0;
info->fix.ywrapstep = (par->ypan > 1) ? 1 : 0;
- /*
- * If we were unable to get the state buffer size, disable
- * functions for saving and restoring the hardware state.
- */
- if (par->vbe_state_size == 0) {
- info->fbops->fb_save_state = NULL;
- info->fbops->fb_restore_state = NULL;
- }
-
/* Disable blanking if the user requested so. */
if (!blank)
info->fbops->fb_blank = NULL;
}
err = misc_register(&fitpc2_wdt_miscdev);
- if (!err) {
+ if (err) {
pr_err("cannot register miscdev on minor=%d (err=%d)\n",
WATCHDOG_MINOR, err);
goto err_margin;
config HUGETLBFS
bool "HugeTLB file system support"
- depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \
+ depends on X86 || IA64 || SPARC64 || (S390 && 64BIT) || \
SYS_SUPPORTS_HUGETLBFS || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
* @gfp_mask: allocation mask to use
* @nr_iovecs: number of iovecs
*
- * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask
- * contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ * bio_alloc will allocate a bio and associated bio_vec array that can hold
+ * at least @nr_iovecs entries. Allocations will be done from the
+ * fs_bio_set. Also see @bio_alloc_bioset and @bio_kmalloc.
+ *
+ * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ * a bio. This is due to the mempool guarantees. To make this work, callers
+ * must never allocate more than 1 bio at a time from this pool. Callers
+ * that need to allocate more than 1 bio must always submit the previously
+ * allocated bio for IO before attempting to allocate a new one. Failure to
+ * do so can cause livelocks under memory pressure.
*
* RETURNS:
* Pointer to new bio on success, NULL on failure.
}
/**
- * bio_alloc - allocate a bio for I/O
+ * bio_kmalloc - allocate a bio for I/O using kmalloc()
* @gfp_mask: the GFP_ mask given to the slab allocator
* @nr_iovecs: number of iovecs to pre-allocate
*
* Description:
- * bio_alloc will allocate a bio and associated bio_vec array that can hold
- * at least @nr_iovecs entries. Allocations will be done from the
- * fs_bio_set. Also see @bio_alloc_bioset.
- *
- * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
- * a bio. This is due to the mempool guarantees. To make this work, callers
- * must never allocate more than 1 bio at a time from this pool. Callers
- * that need to allocate more than 1 bio must always submit the previously
- * allocated bio for IO before attempting to allocate a new one. Failure to
- * do so can cause livelocks under memory pressure.
+ * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask contains
+ * %__GFP_WAIT, the allocation is guaranteed to succeed.
*
**/
struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
*
* Description:
* Put a reference to a &struct bio, either one you have gotten with
- * bio_alloc or bio_get. The last put of a bio will free it.
+ * bio_alloc, bio_get or bio_clone. The last put of a bio will free it.
**/
void bio_put(struct bio *bio)
{
free_space = btrfs_super_total_bytes(disk_super);
/*
- * we allow the metadata to grow to a max of either 5gb or 5% of the
+ * we allow the metadata to grow to a max of either 10gb or 5% of the
* space in the volume.
*/
- min_metadata = min((u64)5 * 1024 * 1024 * 1024,
+ min_metadata = min((u64)10 * 1024 * 1024 * 1024,
div64_u64(free_space * 5, 100));
if (info->total_bytes >= min_metadata) {
spin_unlock(&info->lock);
}
enum btrfs_loop_type {
- LOOP_CACHED_ONLY = 0,
+ LOOP_FIND_IDEAL = 0,
LOOP_CACHING_NOWAIT = 1,
LOOP_CACHING_WAIT = 2,
LOOP_ALLOC_CHUNK = 3,
struct btrfs_block_group_cache *block_group = NULL;
int empty_cluster = 2 * 1024 * 1024;
int allowed_chunk_alloc = 0;
+ int done_chunk_alloc = 0;
struct btrfs_space_info *space_info;
int last_ptr_loop = 0;
int loop = 0;
bool found_uncached_bg = false;
bool failed_cluster_refill = false;
bool failed_alloc = false;
+ u64 ideal_cache_percent = 0;
+ u64 ideal_cache_offset = 0;
WARN_ON(num_bytes < root->sectorsize);
btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
empty_cluster = 0;
if (search_start == hint_byte) {
+ideal_cache:
block_group = btrfs_lookup_block_group(root->fs_info,
search_start);
/*
* we don't want to use the block group if it doesn't match our
* allocation bits, or if its not cached.
+ *
+ * However if we are re-searching with an ideal block group
+ * picked out then we don't care that the block group is cached.
*/
if (block_group && block_group_bits(block_group, data) &&
- block_group_cache_done(block_group)) {
+ (block_group->cached != BTRFS_CACHE_NO ||
+ search_start == ideal_cache_offset)) {
down_read(&space_info->groups_sem);
if (list_empty(&block_group->list) ||
block_group->ro) {
*/
btrfs_put_block_group(block_group);
up_read(&space_info->groups_sem);
- } else
+ } else {
goto have_block_group;
+ }
} else if (block_group) {
btrfs_put_block_group(block_group);
}
}
-
search:
down_read(&space_info->groups_sem);
list_for_each_entry(block_group, &space_info->block_groups, list) {
have_block_group:
if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+ u64 free_percent;
+
+ free_percent = btrfs_block_group_used(&block_group->item);
+ free_percent *= 100;
+ free_percent = div64_u64(free_percent,
+ block_group->key.offset);
+ free_percent = 100 - free_percent;
+ if (free_percent > ideal_cache_percent &&
+ likely(!block_group->ro)) {
+ ideal_cache_offset = block_group->key.objectid;
+ ideal_cache_percent = free_percent;
+ }
+
/*
- * we want to start caching kthreads, but not too many
- * right off the bat so we don't overwhelm the system,
- * so only start them if there are less than 2 and we're
- * in the initial allocation phase.
+ * We only want to start kthread caching if we are at
+ * the point where we will wait for caching to make
+ * progress, or if our ideal search is over and we've
+ * found somebody to start caching.
*/
if (loop > LOOP_CACHING_NOWAIT ||
- atomic_read(&space_info->caching_threads) < 2) {
+ (loop > LOOP_FIND_IDEAL &&
+ atomic_read(&space_info->caching_threads) < 2)) {
ret = cache_block_group(block_group);
BUG_ON(ret);
}
- }
-
- cached = block_group_cache_done(block_group);
- if (unlikely(!cached)) {
found_uncached_bg = true;
- /* if we only want cached bgs, loop */
- if (loop == LOOP_CACHED_ONLY)
+ /*
+ * If loop is set for cached only, try the next block
+ * group.
+ */
+ if (loop == LOOP_FIND_IDEAL)
goto loop;
}
+ cached = block_group_cache_done(block_group);
+ if (unlikely(!cached))
+ found_uncached_bg = true;
+
if (unlikely(block_group->ro))
goto loop;
}
up_read(&space_info->groups_sem);
- /* LOOP_CACHED_ONLY, only search fully cached block groups
- * LOOP_CACHING_NOWAIT, search partially cached block groups, but
- * dont wait foR them to finish caching
+ /* LOOP_FIND_IDEAL, only search caching/cached bg's, and don't wait for
+ * for them to make caching progress. Also
+ * determine the best possible bg to cache
+ * LOOP_CACHING_NOWAIT, search partially cached block groups, kicking
+ * caching kthreads as we move along
* LOOP_CACHING_WAIT, search everything, and wait if our bg is caching
* LOOP_ALLOC_CHUNK, force a chunk allocation and try again
* LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
(found_uncached_bg || empty_size || empty_cluster ||
allowed_chunk_alloc)) {
- if (found_uncached_bg) {
+ if (loop == LOOP_FIND_IDEAL && found_uncached_bg) {
found_uncached_bg = false;
- if (loop < LOOP_CACHING_WAIT) {
- loop++;
+ loop++;
+ if (!ideal_cache_percent &&
+ atomic_read(&space_info->caching_threads))
goto search;
- }
+
+ /*
+ * 1 of the following 2 things have happened so far
+ *
+ * 1) We found an ideal block group for caching that
+ * is mostly full and will cache quickly, so we might
+ * as well wait for it.
+ *
+ * 2) We searched for cached only and we didn't find
+ * anything, and we didn't start any caching kthreads
+ * either, so chances are we will loop through and
+ * start a couple caching kthreads, and then come back
+ * around and just wait for them. This will be slower
+ * because we will have 2 caching kthreads reading at
+ * the same time when we could have just started one
+ * and waited for it to get far enough to give us an
+ * allocation, so go ahead and go to the wait caching
+ * loop.
+ */
+ loop = LOOP_CACHING_WAIT;
+ search_start = ideal_cache_offset;
+ ideal_cache_percent = 0;
+ goto ideal_cache;
+ } else if (loop == LOOP_FIND_IDEAL) {
+ /*
+ * Didn't find a uncached bg, wait on anything we find
+ * next.
+ */
+ loop = LOOP_CACHING_WAIT;
+ goto search;
+ }
+
+ if (loop < LOOP_CACHING_WAIT) {
+ loop++;
+ goto search;
}
if (loop == LOOP_ALLOC_CHUNK) {
ret = do_chunk_alloc(trans, root, num_bytes +
2 * 1024 * 1024, data, 1);
allowed_chunk_alloc = 0;
- } else {
+ done_chunk_alloc = 1;
+ } else if (!done_chunk_alloc) {
space_info->force_alloc = 1;
}
write_lock(&tree->lock);
em = lookup_extent_mapping(tree, start, len);
- WARN_ON(em->start != start || !em);
+ WARN_ON(!em || em->start != start);
if (!em)
goto out;
window_start = entry->offset;
window_free = entry->bytes;
last = entry;
- max_extent = 0;
+ max_extent = entry->bytes;
} else {
last = next;
window_free += next->bytes;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
struct extent_io_tree *io_tree;
- int ret;
+ int ret = 0;
if (list_empty(&async_cow->extents))
return 0;
io_tree = &BTRFS_I(inode)->io_tree;
+retry:
/* did the compression code fall back to uncompressed IO? */
if (!async_extent->pages) {
int page_started = 0;
async_extent->ram_size - 1, GFP_NOFS);
/* allocate blocks */
- cow_file_range(inode, async_cow->locked_page,
- async_extent->start,
- async_extent->start +
- async_extent->ram_size - 1,
- &page_started, &nr_written, 0);
+ ret = cow_file_range(inode, async_cow->locked_page,
+ async_extent->start,
+ async_extent->start +
+ async_extent->ram_size - 1,
+ &page_started, &nr_written, 0);
/*
* if page_started, cow_file_range inserted an
* and IO for us. Otherwise, we need to submit
* all those pages down to the drive.
*/
- if (!page_started)
+ if (!page_started && !ret)
extent_write_locked_range(io_tree,
inode, async_extent->start,
async_extent->start +
async_extent->compressed_size,
0, alloc_hint,
(u64)-1, &ins, 1);
- BUG_ON(ret);
+ if (ret) {
+ int i;
+ for (i = 0; i < async_extent->nr_pages; i++) {
+ WARN_ON(async_extent->pages[i]->mapping);
+ page_cache_release(async_extent->pages[i]);
+ }
+ kfree(async_extent->pages);
+ async_extent->nr_pages = 0;
+ async_extent->pages = NULL;
+ unlock_extent(io_tree, async_extent->start,
+ async_extent->start +
+ async_extent->ram_size - 1, GFP_NOFS);
+ goto retry;
+ }
+
em = alloc_extent_map(GFP_NOFS);
em->start = async_extent->start;
em->len = async_extent->ram_size;
em = search_extent_mapping(&BTRFS_I(inode)->extent_tree,
start, num_bytes);
if (em) {
- alloc_hint = em->block_start;
- free_extent_map(em);
+ /*
+ * if block start isn't an actual block number then find the
+ * first block in this inode and use that as a hint. If that
+ * block is also bogus then just don't worry about it.
+ */
+ if (em->block_start >= EXTENT_MAP_LAST_BYTE) {
+ free_extent_map(em);
+ em = search_extent_mapping(em_tree, 0, 0);
+ if (em && em->block_start < EXTENT_MAP_LAST_BYTE)
+ alloc_hint = em->block_start;
+ if (em)
+ free_extent_map(em);
+ } else {
+ alloc_hint = em->block_start;
+ free_extent_map(em);
+ }
}
read_unlock(&BTRFS_I(inode)->extent_tree.lock);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
root = BTRFS_I(dir)->root;
+ /*
+ * 5 items for unlink inode
+ * 1 for orphan
+ */
+ ret = btrfs_reserve_metadata_space(root, 6);
+ if (ret)
+ return ret;
+
trans = btrfs_start_transaction(root, 1);
+ if (IS_ERR(trans)) {
+ btrfs_unreserve_metadata_space(root, 6);
+ return PTR_ERR(trans);
+ }
btrfs_set_trans_block_group(trans, dir);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
+ btrfs_unreserve_metadata_space(root, 6);
btrfs_btree_balance_dirty(root, nr);
return ret;
}
inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
return -ENOTEMPTY;
+ ret = btrfs_reserve_metadata_space(root, 5);
+ if (ret)
+ return ret;
+
trans = btrfs_start_transaction(root, 1);
+ if (IS_ERR(trans)) {
+ btrfs_unreserve_metadata_space(root, 5);
+ return PTR_ERR(trans);
+ }
+
btrfs_set_trans_block_group(trans, dir);
if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) {
out:
nr = trans->blocks_used;
ret = btrfs_end_transaction_throttle(trans, root);
+ btrfs_unreserve_metadata_space(root, 5);
btrfs_btree_balance_dirty(root, nr);
if (ret && !err)
ei->logged_trans = 0;
ei->outstanding_extents = 0;
ei->reserved_extents = 0;
+ ei->root = NULL;
spin_lock_init(&ei->accounting_lock);
btrfs_ordered_inode_tree_init(&ei->ordered_tree);
INIT_LIST_HEAD(&ei->i_orphan);
WARN_ON(!list_empty(&inode->i_dentry));
WARN_ON(inode->i_data.nrpages);
+ /*
+ * This can happen where we create an inode, but somebody else also
+ * created the same inode and we need to destroy the one we already
+ * created.
+ */
+ if (!root)
+ goto free;
+
/*
* Make sure we're properly removed from the ordered operation
* lists.
}
inode_tree_del(inode);
btrfs_drop_extent_cache(inode, 0, (u64)-1, 0);
+free:
kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
}
return -ENOTEMPTY;
/*
- * 2 items for dir items
- * 1 item for orphan entry
- * 1 item for ref
+ * We want to reserve the absolute worst case amount of items. So if
+ * both inodes are subvols and we need to unlink them then that would
+ * require 4 item modifications, but if they are both normal inodes it
+ * would require 5 item modifications, so we'll assume their normal
+ * inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items
+ * should cover the worst case number of items we'll modify.
*/
- ret = btrfs_reserve_metadata_space(root, 4);
+ ret = btrfs_reserve_metadata_space(root, 11);
if (ret)
return ret;
if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
up_read(&root->fs_info->subvol_sem);
- btrfs_unreserve_metadata_space(root, 4);
+ btrfs_unreserve_metadata_space(root, 11);
return ret;
}
write_extent_buffer(l, item, ptr, sizeof(*item));
btrfs_mark_buffer_dirty(path->nodes[0]);
out:
- btrfs_release_path(root, path);
btrfs_free_path(path);
return ret;
}
BUG_ON(refs != 0);
ret = btrfs_del_item(trans, root, path);
out:
- btrfs_release_path(root, path);
btrfs_free_path(path);
return ret;
}
}
}
+enum btrfs_trans_type {
+ TRANS_START,
+ TRANS_JOIN,
+ TRANS_USERSPACE,
+};
+
static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root,
- int num_blocks, int wait)
+ int num_blocks, int type)
{
struct btrfs_trans_handle *h =
kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS);
mutex_lock(&root->fs_info->trans_mutex);
if (!root->fs_info->log_root_recovering &&
- ((wait == 1 && !root->fs_info->open_ioctl_trans) || wait == 2))
+ ((type == TRANS_START && !root->fs_info->open_ioctl_trans) ||
+ type == TRANS_USERSPACE))
wait_current_trans(root);
ret = join_transaction(root);
BUG_ON(ret);
h->alloc_exclude_start = 0;
h->delayed_ref_updates = 0;
- if (!current->journal_info)
+ if (!current->journal_info && type != TRANS_USERSPACE)
current->journal_info = h;
root->fs_info->running_transaction->use_count++;
struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root,
int num_blocks)
{
- return start_transaction(root, num_blocks, 1);
+ return start_transaction(root, num_blocks, TRANS_START);
}
struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root,
int num_blocks)
{
- return start_transaction(root, num_blocks, 0);
+ return start_transaction(root, num_blocks, TRANS_JOIN);
}
struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r,
int num_blocks)
{
- return start_transaction(r, num_blocks, 2);
+ return start_transaction(r, num_blocks, TRANS_USERSPACE);
}
/* wait for a transaction commit to be fully complete */
const struct nls_table *nls_codepage, int remap_special_chars);
extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon,
const int netfid, __u64 *pExtAttrBits, __u64 *pMask);
+extern void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb);
#endif /* _CIFSPROTO_H */
struct cifs_sb_info *cifs_sb, const char *full_path)
{
int rc;
- __u64 inode_num;
FILE_ALL_INFO *pfile_info;
- rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc != -EOPNOTSUPP)
- return rc;
-
pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
if (pfile_info == NULL)
return -ENOMEM;
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc1) {
+ if (rc1 || !fattr.cf_uniqueid) {
cFYI(1, ("GetSrvInodeNum rc %d", rc1));
fattr.cf_uniqueid = iunique(sb, ROOT_I);
- /* disable serverino if call not supported */
- if (rc1 == -EINVAL)
- cifs_sb->mnt_cifs_flags &=
- ~CIFS_MOUNT_SERVER_INUM;
+ cifs_autodisable_serverino(cifs_sb);
}
} else {
fattr.cf_uniqueid = iunique(sb, ROOT_I);
ctoUCS_out:
return i;
}
+
+void
+cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb)
+{
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+ cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
+ cERROR(1, ("Autodisabling the use of server inode numbers on "
+ "%s. This server doesn't seem to support them "
+ "properly. Hardlinks will not be recognized on this "
+ "mount. Consider mounting with the \"noserverino\" "
+ "option to silence this message.",
+ cifs_sb->tcon->treeName));
+ }
+}
cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *)
pfindEntry, cifs_sb);
- /* FIXME: make _to_fattr functions fill this out */
- if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO)
+ if (inum && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
fattr.cf_uniqueid = inum;
- else
+ } else {
fattr.cf_uniqueid = iunique(sb, ROOT_I);
+ cifs_autodisable_serverino(cifs_sb);
+ }
ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid);
tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr);
if (retval < 0)
goto out;
+ current->stack_start = current->mm->start_stack;
+
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
/* just account for different alignment */
static int compat_ioctl_preallocate(struct file *file, unsigned long arg)
{
- struct space_resv_32 __user *p32 = (void __user *)arg;
+ struct space_resv_32 __user *p32 = compat_ptr(arg);
struct space_resv __user *p = compat_alloc_user_space(sizeof(*p));
if (copy_in_user(&p->l_type, &p32->l_type, sizeof(s16)) ||
#else
case FS_IOC_RESVSP:
case FS_IOC_RESVSP64:
- error = ioctl_preallocate(filp, (void __user *)arg);
+ error = ioctl_preallocate(filp, compat_ptr(arg));
goto out_fput;
#endif
/* Move stack pages down in memory. */
if (stack_shift) {
ret = shift_arg_pages(vma, stack_shift);
- if (ret) {
- up_write(&mm->mmap_sem);
- return ret;
- }
+ if (ret)
+ goto out_unlock;
}
#ifdef CONFIG_STACK_GROWSUP
out_unlock:
up_write(&mm->mmap_sem);
- return 0;
+ return ret;
}
EXPORT_SYMBOL(setup_arg_pages);
int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync)
{
struct inode *inode = dentry->d_inode;
+ struct ext3_inode_info *ei = EXT3_I(inode);
+ journal_t *journal = EXT3_SB(inode->i_sb)->s_journal;
int ret = 0;
+ tid_t commit_tid;
+
+ if (inode->i_sb->s_flags & MS_RDONLY)
+ return 0;
J_ASSERT(ext3_journal_current_handle() == NULL);
/*
- * data=writeback:
+ * data=writeback,ordered:
* The caller's filemap_fdatawrite()/wait will sync the data.
- * sync_inode() will sync the metadata
- *
- * data=ordered:
- * The caller's filemap_fdatawrite() will write the data and
- * sync_inode() will write the inode if it is dirty. Then the caller's
- * filemap_fdatawait() will wait on the pages.
+ * Metadata is in the journal, we wait for a proper transaction
+ * to commit here.
*
* data=journal:
* filemap_fdatawrite won't do anything (the buffers are clean).
goto out;
}
- if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
- goto flush;
+ if (datasync)
+ commit_tid = atomic_read(&ei->i_datasync_tid);
+ else
+ commit_tid = atomic_read(&ei->i_sync_tid);
- /*
- * The VFS has written the file data. If the inode is unaltered
- * then we need not start a commit.
- */
- if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) {
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .nr_to_write = 0, /* sys_fsync did this */
- };
- ret = sync_inode(inode, &wbc);
+ if (log_start_commit(journal, commit_tid)) {
+ log_wait_commit(journal, commit_tid);
goto out;
}
-flush:
+
/*
* In case we didn't commit a transaction, we have to flush
* disk caches manually so that data really is on persistent
int err = 0;
struct ext3_block_alloc_info *block_i;
ext3_fsblk_t current_block;
+ struct ext3_inode_info *ei = EXT3_I(inode);
- block_i = EXT3_I(inode)->i_block_alloc_info;
+ block_i = ei->i_block_alloc_info;
/*
* If we're splicing into a [td]indirect block (as opposed to the
* inode) then we need to get write access to the [td]indirect block
inode->i_ctime = CURRENT_TIME_SEC;
ext3_mark_inode_dirty(handle, inode);
+ /* ext3_mark_inode_dirty already updated i_sync_tid */
+ atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid);
/* had we spliced it onto indirect block? */
if (where->bh) {
ssize_t ret;
int orphan = 0;
size_t count = iov_length(iov, nr_segs);
+ int retries = 0;
if (rw == WRITE) {
loff_t final_size = offset + count;
}
}
+retry:
ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext3_get_block, NULL);
+ if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
+ goto retry;
if (orphan) {
int err;
struct ext3_inode_info *ei;
struct buffer_head *bh;
struct inode *inode;
+ journal_t *journal = EXT3_SB(sb)->s_journal;
+ transaction_t *transaction;
long ret;
int block;
ei->i_data[block] = raw_inode->i_block[block];
INIT_LIST_HEAD(&ei->i_orphan);
+ /*
+ * Set transaction id's of transactions that have to be committed
+ * to finish f[data]sync. We set them to currently running transaction
+ * as we cannot be sure that the inode or some of its metadata isn't
+ * part of the transaction - the inode could have been reclaimed and
+ * now it is reread from disk.
+ */
+ if (journal) {
+ tid_t tid;
+
+ spin_lock(&journal->j_state_lock);
+ if (journal->j_running_transaction)
+ transaction = journal->j_running_transaction;
+ else
+ transaction = journal->j_committing_transaction;
+ if (transaction)
+ tid = transaction->t_tid;
+ else
+ tid = journal->j_commit_sequence;
+ spin_unlock(&journal->j_state_lock);
+ atomic_set(&ei->i_sync_tid, tid);
+ atomic_set(&ei->i_datasync_tid, tid);
+ }
+
if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 &&
EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) {
/*
err = rc;
ei->i_state &= ~EXT3_STATE_NEW;
+ atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid);
out_brelse:
brelse (bh);
ext3_std_error(inode->i_sb, err);
return NULL;
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
+ atomic_set(&ei->i_datasync_tid, 0);
+ atomic_set(&ei->i_sync_tid, 0);
return &ei->vfs_inode;
}
#define EXT4_STATE_NO_EXPAND 0x00000008 /* No space for expansion */
#define EXT4_STATE_DA_ALLOC_CLOSE 0x00000010 /* Alloc DA blks on close */
#define EXT4_STATE_EXT_MIGRATE 0x00000020 /* Inode is migrating */
+#define EXT4_STATE_DIO_UNWRITTEN 0x00000040 /* need convert on dio done*/
/* Used to pass group descriptor data when online resize is done */
struct ext4_new_group_input {
* into three uninitialized extent(at most). After IO complete, the part
* being filled will be convert to initialized by the end_io callback function
* via ext4_convert_unwritten_extents().
+ *
+ * Returns the size of uninitialized extent to be written on success.
*/
static int ext4_split_unwritten_extents(handle_t *handle,
struct inode *inode,
unsigned int allocated, ee_len, depth;
ext4_fsblk_t newblock;
int err = 0;
- int ret = 0;
ext_debug("ext4_split_unwritten_extents: inode %lu,"
"iblock %llu, max_blocks %u\n", inode->i_ino,
ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
/*
- * if the entire unintialized extent length less than
- * the size of extent to write, there is no need to split
- * uninitialized extent
+ * If the uninitialized extent begins at the same logical
+ * block where the write begins, and the write completely
+ * covers the extent, then we don't need to split it.
*/
- if (allocated <= max_blocks)
- return ret;
+ if ((iblock == ee_block) && (allocated <= max_blocks))
+ return allocated;
err = ext4_ext_get_access(handle, inode, path + depth);
if (err)
ret = ext4_split_unwritten_extents(handle,
inode, path, iblock,
max_blocks, flags);
- /* flag the io_end struct that we need convert when IO done */
+ /*
+ * Flag the inode(non aio case) or end_io struct (aio case)
+ * that this IO needs to convertion to written when IO is
+ * completed
+ */
if (io)
io->flag = DIO_AIO_UNWRITTEN;
+ else
+ EXT4_I(inode)->i_state |= EXT4_STATE_DIO_UNWRITTEN;
goto out;
}
- /* DIO end_io complete, convert the filled extent to written */
+ /* async DIO end_io complete, convert the filled extent to written */
if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) {
ret = ext4_convert_unwritten_extents_dio(handle, inode,
path);
* To avoid unecessary convertion for every aio dio rewrite
* to the mid of file, here we flag the IO that is really
* need the convertion.
- *
+ * For non asycn direct IO case, flag the inode state
+ * that we need to perform convertion when IO is done.
*/
- if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT)
- io->flag = DIO_AIO_UNWRITTEN;
+ if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) {
+ if (io)
+ io->flag = DIO_AIO_UNWRITTEN;
+ else
+ EXT4_I(inode)->i_state |=
+ EXT4_STATE_DIO_UNWRITTEN;;
+ }
}
err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err) {
*
* This function is called from the direct IO end io call back
* function, to convert the fallocated extents after IO is completed.
+ * Returns 0 on success.
*/
int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
loff_t len)
* so before we call here everything must be consistently dirtied against
* this transaction.
*/
- int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode,
+int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode,
int nblocks)
{
int ret;
up_write(&EXT4_I(inode)->i_data_sem);
ret = ext4_journal_restart(handle, blocks_for_truncate(inode));
down_write(&EXT4_I(inode)->i_data_sem);
+ ext4_discard_preallocations(inode);
return ret;
}
return ret;
}
-/* Maximum number of blocks we map for direct IO at once. */
-
static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
ext4_io_end_t *io_end = iocb->private;
struct workqueue_struct *wq;
+ /* if not async direct IO or dio with 0 bytes write, just return */
+ if (!io_end || !size)
+ return;
+
ext_debug("ext4_end_io_dio(): io_end 0x%p"
"for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
iocb->private, io_end->inode->i_ino, iocb, offset,
size);
- /* if not async direct IO or dio with 0 bytes write, just return */
- if (!io_end || !size)
- return;
/* if not aio dio with unwritten extents, just free io and return */
if (io_end->flag != DIO_AIO_UNWRITTEN){
if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) {
ext4_free_io_end(iocb->private);
iocb->private = NULL;
- } else if (ret > 0)
+ } else if (ret > 0 && (EXT4_I(inode)->i_state &
+ EXT4_STATE_DIO_UNWRITTEN)) {
+ int err;
/*
* for non AIO case, since the IO is already
* completed, we could do the convertion right here
*/
- ret = ext4_convert_unwritten_extents(inode,
- offset, ret);
+ err = ext4_convert_unwritten_extents(inode,
+ offset, ret);
+ if (err < 0)
+ ret = err;
+ EXT4_I(inode)->i_state &= ~EXT4_STATE_DIO_UNWRITTEN;
+ }
return ret;
}
return retval;
if (blocks == 1 && !dx_fallback &&
- EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) {
- retval = make_indexed_dir(handle, dentry, inode, bh);
- if (retval == -ENOSPC)
- brelse(bh);
- return retval;
- }
+ EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX))
+ return make_indexed_dir(handle, dentry, inode, bh);
brelse(bh);
}
bh = ext4_append(handle, dir, &block, &retval);
de = (struct ext4_dir_entry_2 *) bh->b_data;
de->inode = 0;
de->rec_len = ext4_rec_len_to_disk(blocksize, blocksize);
- retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
- if (retval == -ENOSPC)
- brelse(bh);
- return retval;
+ return add_dirent_to_buf(handle, dentry, inode, de, bh);
}
/*
if (!de)
goto cleanup;
err = add_dirent_to_buf(handle, dentry, inode, de, bh);
- if (err != -ENOSPC)
- bh = NULL;
+ bh = NULL;
goto cleanup;
journal_error:
type = PIDTYPE_PID;
break;
- case F_OWNER_GID:
+ case F_OWNER_PGRP:
type = PIDTYPE_PGID;
break;
break;
case PIDTYPE_PGID:
- owner.type = F_OWNER_GID;
+ owner.type = F_OWNER_PGRP;
break;
default:
fuse_invalidate_attr(newdir);
/* newent will end up negative */
- if (newent->d_inode)
+ if (newent->d_inode) {
+ fuse_invalidate_attr(newent->d_inode);
fuse_invalidate_entry_cache(newent);
+ }
} else if (err == -EINTR) {
/* If request was interrupted, DEITY only knows if the
rename actually took place. If the invalidation
break;
}
}
- fuse_put_request(fc, req);
+ if (!IS_ERR(req))
+ fuse_put_request(fc, req);
if (res > 0)
*ppos = pos;
kaddr += copy;
}
- kunmap(map);
+ kunmap(page);
}
return 0;
u64 len, get_block_t *get_block)
{
struct buffer_head tmp;
- unsigned int start_blk;
+ unsigned long long start_blk;
long long length = 0, map_len = 0;
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
EXPORT_SYMBOL(journal_ack_err);
EXPORT_SYMBOL(journal_clear_err);
EXPORT_SYMBOL(log_wait_commit);
+EXPORT_SYMBOL(log_start_commit);
EXPORT_SYMBOL(journal_start_commit);
EXPORT_SYMBOL(journal_force_commit_nested);
EXPORT_SYMBOL(journal_wipe);
return journal;
out_err:
+ kfree(journal->j_wbuf);
kfree(journal);
return NULL;
}
return journal;
out_err:
+ kfree(journal->j_wbuf);
kfree(journal);
return NULL;
}
return journal;
out_err:
+ kfree(journal->j_wbuf);
jbd2_stats_proc_exit(journal);
kfree(journal);
return NULL;
return journal;
out_err:
+ kfree(journal->j_wbuf);
jbd2_stats_proc_exit(journal);
kfree(journal);
return NULL;
.pages = &page,
.pgbase = 0,
.count = count,
- .bitmask = NFS_SERVER(dentry->d_inode)->cache_consistency_bitmask,
+ .bitmask = NFS_SERVER(dentry->d_inode)->attr_bitmask,
};
struct nfs4_readdir_res res;
struct rpc_message msg = {
p1 = encode_entry_baggage(cd, p1, name, namlen, ino);
if (plus)
- p = encode_entryplus_baggage(cd, p1, name, namlen);
+ p1 = encode_entryplus_baggage(cd, p1, name, namlen);
/* determine entry word length and lengths to go in pages */
num_entry_words = p1 - tmp;
* exclusive with a new mount job. Though it doesn't cover
* umount, it's enough for the purpose.
*/
- mutex_lock(&nilfs->ns_mount_mutex);
if (nilfs_checkpoint_is_mounted(nilfs, cno, 1)) {
/* Current implementation does not have to protect
plain read-only mounts since they are exclusive
ret = -EBUSY;
} else
ret = nilfs_cpfile_clear_snapshot(cpfile, cno);
- mutex_unlock(&nilfs->ns_mount_mutex);
return ret;
case NILFS_SNAPSHOT:
return nilfs_cpfile_set_snapshot(cpfile, cno);
int err;
spin_lock(&sbi->s_inode_lock);
- /* Caller of this function MUST lock s_inode_lock */
if (ii->i_bh == NULL) {
spin_unlock(&sbi->s_inode_lock);
err = nilfs_ifile_get_inode_block(sbi->s_ifile, inode->i_ino,
static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp,
unsigned int cmd, void __user *argp)
{
- struct inode *cpfile = NILFS_SB(inode->i_sb)->s_nilfs->ns_cpfile;
+ struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+ struct inode *cpfile = nilfs->ns_cpfile;
struct nilfs_transaction_info ti;
struct nilfs_cpmode cpmode;
int ret;
if (copy_from_user(&cpmode, argp, sizeof(cpmode)))
return -EFAULT;
+ mutex_lock(&nilfs->ns_mount_mutex);
nilfs_transaction_begin(inode->i_sb, &ti, 0);
ret = nilfs_cpfile_change_cpmode(
cpfile, cpmode.cm_cno, cpmode.cm_mode);
if (unlikely(ret < 0)) {
nilfs_transaction_abort(inode->i_sb);
+ mutex_unlock(&nilfs->ns_mount_mutex);
return ret;
}
nilfs_transaction_commit(inode->i_sb); /* never fails */
+ mutex_unlock(&nilfs->ns_mount_mutex);
return ret;
}
(unsigned long long)vdesc->vd_vblocknr);
return ret;
}
- bh->b_private = vdesc;
+ if (unlikely(!list_empty(&bh->b_assoc_buffers))) {
+ printk(KERN_CRIT "%s: conflicting %s buffer: ino=%llu, "
+ "cno=%llu, offset=%llu, blocknr=%llu, vblocknr=%llu\n",
+ __func__, vdesc->vd_flags ? "node" : "data",
+ (unsigned long long)vdesc->vd_ino,
+ (unsigned long long)vdesc->vd_cno,
+ (unsigned long long)vdesc->vd_offset,
+ (unsigned long long)vdesc->vd_blocknr,
+ (unsigned long long)vdesc->vd_vblocknr);
+ brelse(bh);
+ return -EEXIST;
+ }
list_add_tail(&bh->b_assoc_buffers, buffers);
return 0;
}
list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) {
ret = nilfs_gccache_wait_and_mark_dirty(bh);
if (unlikely(ret < 0)) {
- if (ret == -EEXIST) {
- vdesc = bh->b_private;
- printk(KERN_CRIT
- "%s: conflicting %s buffer: "
- "ino=%llu, cno=%llu, offset=%llu, "
- "blocknr=%llu, vblocknr=%llu\n",
- __func__,
- vdesc->vd_flags ? "node" : "data",
- (unsigned long long)vdesc->vd_ino,
- (unsigned long long)vdesc->vd_cno,
- (unsigned long long)vdesc->vd_offset,
- (unsigned long long)vdesc->vd_blocknr,
- (unsigned long long)vdesc->vd_vblocknr);
- }
+ WARN_ON(ret == -EEXIST);
goto failed;
}
list_del_init(&bh->b_assoc_buffers);
- bh->b_private = NULL;
brelse(bh);
}
return nmembs;
failed:
list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) {
list_del_init(&bh->b_assoc_buffers);
- bh->b_private = NULL;
brelse(bh);
}
return ret;
return 0;
failed:
- nilfs_remove_all_gcinode(nilfs);
printk(KERN_ERR "NILFS: GC failed during preparation: %s: err=%d\n",
msg, ret);
return ret;
else
ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+ if (ret < 0)
+ nilfs_remove_all_gcinode(nilfs);
clear_nilfs_gc_running(nilfs);
out_free:
struct super_block *sb = inode->i_sb;
if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) ||
- !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL))
+ !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) ||
+ OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)
return 0;
cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits;
#include <linux/kref.h>
#include <linux/mutex.h>
#include <linux/lockdep.h>
-#ifndef CONFIG_OCFS2_COMPAT_JBD
-# include <linux/jbd2.h>
-#else
-# include <linux/jbd.h>
-# include "ocfs2_jbd_compat.h"
-#endif
+#include <linux/jbd2.h>
/* For union ocfs2_dlm_lksb */
#include "stackglue.h"
goto out;
}
+ if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL)
+ goto attach_xattr;
+
ocfs2_init_dinode_extent_tree(&di_et, INODE_CACHE(inode), di_bh);
size = i_size_read(inode);
cpos += num_clusters;
}
+attach_xattr:
if (oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) {
ret = ocfs2_xattr_attach_refcount_tree(inode, di_bh,
&ref_tree->rf_ci,
return ret;
}
+static int ocfs2_duplicate_inline_data(struct inode *s_inode,
+ struct buffer_head *s_bh,
+ struct inode *t_inode,
+ struct buffer_head *t_bh)
+{
+ int ret;
+ handle_t *handle;
+ struct ocfs2_super *osb = OCFS2_SB(s_inode->i_sb);
+ struct ocfs2_dinode *s_di = (struct ocfs2_dinode *)s_bh->b_data;
+ struct ocfs2_dinode *t_di = (struct ocfs2_dinode *)t_bh->b_data;
+
+ BUG_ON(!(OCFS2_I(s_inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL));
+
+ handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_journal_access_di(handle, INODE_CACHE(t_inode), t_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret) {
+ mlog_errno(ret);
+ goto out_commit;
+ }
+
+ t_di->id2.i_data.id_count = s_di->id2.i_data.id_count;
+ memcpy(t_di->id2.i_data.id_data, s_di->id2.i_data.id_data,
+ le16_to_cpu(s_di->id2.i_data.id_count));
+ spin_lock(&OCFS2_I(t_inode)->ip_lock);
+ OCFS2_I(t_inode)->ip_dyn_features |= OCFS2_INLINE_DATA_FL;
+ t_di->i_dyn_features = cpu_to_le16(OCFS2_I(t_inode)->ip_dyn_features);
+ spin_unlock(&OCFS2_I(t_inode)->ip_lock);
+
+ ocfs2_journal_dirty(handle, t_bh);
+
+out_commit:
+ ocfs2_commit_trans(osb, handle);
+out:
+ return ret;
+}
+
static int ocfs2_duplicate_extent_list(struct inode *s_inode,
struct inode *t_inode,
struct buffer_head *t_bh,
goto out;
}
+ if (OCFS2_I(s_inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) {
+ ret = ocfs2_duplicate_inline_data(s_inode, s_bh,
+ t_inode, t_bh);
+ if (ret)
+ mlog_errno(ret);
+ goto out;
+ }
+
ret = ocfs2_lock_refcount_tree(osb, le64_to_cpu(di->i_refcount_loc),
1, &ref_tree, &ref_root_bh);
if (ret) {
goto out_unlock_refcount;
}
- ret = ocfs2_complete_reflink(s_inode, s_bh, t_inode, t_bh, preserve);
- if (ret)
- mlog_errno(ret);
-
out_unlock_refcount:
ocfs2_unlock_refcount_tree(osb, ref_tree, 1);
brelse(ref_root_bh);
ret = ocfs2_reflink_xattrs(inode, old_bh,
new_inode, new_bh,
preserve);
- if (ret)
+ if (ret) {
mlog_errno(ret);
+ goto inode_unlock;
+ }
}
+
+ ret = ocfs2_complete_reflink(inode, old_bh,
+ new_inode, new_bh, preserve);
+ if (ret)
+ mlog_errno(ret);
+
inode_unlock:
ocfs2_inode_unlock(new_inode, 1);
brelse(new_bh);
if (tmpstat < 0) {
status = tmpstat;
mlog_errno(status);
- goto bail;
+ break;
}
di = (struct ocfs2_dinode *) (*bh)->b_data;
memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats));
spin_lock_init(&stats->b_lock);
- status = ocfs2_verify_volume(di, *bh, blksize, stats);
- if (status >= 0)
- goto bail;
- brelse(*bh);
- *bh = NULL;
- if (status != -EAGAIN)
+ tmpstat = ocfs2_verify_volume(di, *bh, blksize, stats);
+ if (tmpstat < 0) {
+ brelse(*bh);
+ *bh = NULL;
+ }
+ if (tmpstat != -EAGAIN) {
+ status = tmpstat;
break;
+ }
}
bail:
buf->f_bavail = buf->f_bfree;
buf->f_files = numbits;
buf->f_ffree = freebits;
+ buf->f_fsid.val[0] = crc32_le(0, osb->uuid_str, OCFS2_VOL_UUID_LEN)
+ & 0xFFFFFFFFUL;
+ buf->f_fsid.val[1] = crc32_le(0, osb->uuid_str + OCFS2_VOL_UUID_LEN,
+ OCFS2_VOL_UUID_LEN) & 0xFFFFFFFFUL;
brelse(bh);
#include <linux/highmem.h>
#include <linux/buffer_head.h>
#include <linux/rbtree.h>
-#ifndef CONFIG_OCFS2_COMPAT_JBD
-# include <linux/jbd2.h>
-#else
-# include <linux/jbd.h>
-#endif
#define MLOG_MASK_PREFIX ML_UPTODATE
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
- (permitted) ? task->stack_start : 0,
+ (permitted && mm) ? task->stack_start : 0,
esp,
eip,
/* The signal information here is obsolete.
name.len = snprintf(buf, sizeof(buf), "%d", pid);
dentry = d_hash_and_lookup(mnt->mnt_root, &name);
if (dentry) {
- if (!(current->flags & PF_EXITING))
- shrink_dcache_parent(dentry);
+ shrink_dcache_parent(dentry);
d_drop(dentry);
dput(dentry);
}
#include <linux/init.h>
#include <linux/time.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/stat.h>
#include <linux/string.h>
#include <asm/prom.h>
/*
* Supply data on a read from /proc/device-tree/node/property.
*/
-static int property_read_proc(char *page, char **start, off_t off,
- int count, int *eof, void *data)
+static int property_proc_show(struct seq_file *m, void *v)
{
- struct property *pp = data;
- int n;
+ struct property *pp = m->private;
- if (off >= pp->length) {
- *eof = 1;
- return 0;
- }
- n = pp->length - off;
- if (n > count)
- n = count;
- else
- *eof = 1;
- memcpy(page, (char *)pp->value + off, n);
- *start = page;
- return n;
+ seq_write(m, pp->value, pp->length);
+ return 0;
+}
+
+static int property_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, property_proc_show, PDE(inode)->data);
}
+static const struct file_operations property_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = property_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
/*
* For a node with a name like "gc@10", we make symlinks called "gc"
* and "@10" to it.
* Unfortunately proc_register puts each new entry
* at the beginning of the list. So we rearrange them.
*/
- ent = create_proc_read_entry(name,
- strncmp(name, "security-", 9)
- ? S_IRUGO : S_IRUSR, de,
- property_read_proc, pp);
+ ent = proc_create_data(name,
+ strncmp(name, "security-", 9) ? S_IRUGO : S_IRUSR,
+ de, &property_proc_fops, pp);
if (ent == NULL)
return NULL;
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include "sysfs.h"
DEFINE_MUTEX(sysfs_mutex);
sysfs_put(sd->s_symlink.target_sd);
if (sysfs_type(sd) & SYSFS_COPY_NAME)
kfree(sd->s_name);
+ if (sd->s_iattr && sd->s_iattr->ia_secdata)
+ security_release_secctx(sd->s_iattr->ia_secdata,
+ sd->s_iattr->ia_secdata_len);
kfree(sd->s_iattr);
sysfs_free_ino(sd->s_ino);
kmem_cache_free(sysfs_dir_cachep, sd);
"XFS: NULL dquot in %s.", __func__);
goto next;
}
- if (item->ri_buf[i].i_len < sizeof(xfs_dqblk_t)) {
+ if (item->ri_buf[i].i_len < sizeof(xfs_disk_dquot_t)) {
cmn_err(CE_ALERT,
"XFS: dquot too small (%d) in %s.",
item->ri_buf[i].i_len, __func__);
"XFS: NULL dquot in %s.", __func__);
return XFS_ERROR(EIO);
}
- if (item->ri_buf[1].i_len < sizeof(xfs_dqblk_t)) {
+ if (item->ri_buf[1].i_len < sizeof(xfs_disk_dquot_t)) {
cmn_err(CE_ALERT,
"XFS: dquot too small (%d) in %s.",
item->ri_buf[1].i_len, __func__);
{
xfs_log_item_t *dlip = NULL;
xfs_log_item_t *mlip; /* ptr to minimum lip */
+ xfs_lsn_t tail_lsn;
mlip = xfs_ail_min(ailp);
if (mlip == dlip) {
mlip = xfs_ail_min(ailp);
+ /*
+ * It is not safe to access mlip after the AIL lock is
+ * dropped, so we must get a copy of li_lsn before we do
+ * so. This is especially important on 32-bit platforms
+ * where accessing and updating 64-bit values like li_lsn
+ * is not atomic.
+ */
+ tail_lsn = mlip->li_lsn;
spin_unlock(&ailp->xa_lock);
- xfs_log_move_tail(ailp->xa_mount, mlip->li_lsn);
+ xfs_log_move_tail(ailp->xa_mount, tail_lsn);
} else {
spin_unlock(&ailp->xa_lock);
}
{
xfs_log_item_t *dlip;
xfs_log_item_t *mlip;
+ xfs_lsn_t tail_lsn;
if (lip->li_flags & XFS_LI_IN_AIL) {
mlip = xfs_ail_min(ailp);
if (mlip == dlip) {
mlip = xfs_ail_min(ailp);
+ /*
+ * It is not safe to access mlip after the AIL lock
+ * is dropped, so we must get a copy of li_lsn
+ * before we do so. This is especially important
+ * on 32-bit platforms where accessing and updating
+ * 64-bit values like li_lsn is not atomic.
+ */
+ tail_lsn = mlip ? mlip->li_lsn : 0;
spin_unlock(&ailp->xa_lock);
- xfs_log_move_tail(ailp->xa_mount,
- (mlip ? mlip->li_lsn : 0));
+ xfs_log_move_tail(ailp->xa_mount, tail_lsn);
} else {
spin_unlock(&ailp->xa_lock);
}
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
#endif
+
+#ifndef CONFIG_64BIT
+#ifndef F_GETLK64
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+#endif
+#endif
+
#ifndef F_SETOWN_EX
-#define F_SETOWN_EX 12
-#define F_GETOWN_EX 13
+#define F_SETOWN_EX 15
+#define F_GETOWN_EX 16
#endif
#define F_OWNER_TID 0
#define F_OWNER_PID 1
-#define F_OWNER_GID 2
+#define F_OWNER_PGRP 2
struct f_owner_ex {
int type;
#ifndef CONFIG_64BIT
-#ifndef F_GETLK64
-#define F_GETLK64 12 /* using 'struct flock64' */
-#define F_SETLK64 13
-#define F_SETLKW64 14
-#endif
-
#ifndef HAVE_ARCH_STRUCT_FLOCK64
#ifndef __ARCH_FLOCK64_PAD
#define __ARCH_FLOCK64_PAD
#ifdef CONFIG_HOTPLUG_CPU
extern void unregister_cpu(struct cpu *cpu);
+extern ssize_t arch_cpu_probe(const char *, size_t);
+extern ssize_t arch_cpu_release(const char *, size_t);
#endif
struct notifier_block;
#define unregister_hotcpu_notifier(nb) unregister_cpu_notifier(nb)
int cpu_down(unsigned int cpu);
+#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
+extern void cpu_hotplug_driver_lock(void);
+extern void cpu_hotplug_driver_unlock(void);
+#else
+static inline void cpu_hotplug_driver_lock(void)
+{
+}
+
+static inline void cpu_hotplug_driver_unlock(void)
+{
+}
+#endif
+
#else /* CONFIG_HOTPLUG_CPU */
#define get_online_cpus() do { } while (0)
* by other means, so we have truncate_mutex.
*/
struct mutex truncate_mutex;
+
+ /*
+ * Transactions that contain inode's metadata needed to complete
+ * fsync and fdatasync, respectively.
+ */
+ atomic_t i_sync_tid;
+ atomic_t i_datasync_tid;
+
struct inode vfs_inode;
};
/* perform fb specific mmap */
int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma);
- /* save current hardware state */
- void (*fb_save_state)(struct fb_info *info);
-
- /* restore saved state */
- void (*fb_restore_state)(struct fb_info *info);
-
/* get capability given var */
void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps,
struct fb_var_screeninfo *var);
struct fsl_spi_platform_data {
u32 initial_spmode; /* initial SPMODE value */
s16 bus_num;
- bool qe_mode;
+ unsigned int flags;
+#define SPI_QE_CPU_MODE (1 << 0) /* QE CPU ("PIO") mode */
+#define SPI_CPM_MODE (1 << 1) /* CPM/QE ("DMA") mode */
+#define SPI_CPM1 (1 << 2) /* SPI unit is in CPM1 block */
+#define SPI_CPM2 (1 << 3) /* SPI unit is in CPM2 block */
+#define SPI_QE (1 << 4) /* SPI unit is in QE block */
/* board specific information */
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
* lead to a deep sleep (i.e. power removed from the core,
* instead of just the clock).
*/
+#if defined(CONFIG_PPC_83xx) && defined(CONFIG_SUSPEND)
int fsl_deep_sleep(void);
+#else
+static inline int fsl_deep_sleep(void) { return 0; }
+#endif
#endif /* _FSL_DEVICE_H_ */
int mode; /* Interface mode */
struct completion complete; /* I/O completion */
struct timer_list timer; /* Timeout */
- char * buf; /* Data buffer */
+ u8 * buf; /* Data buffer */
int len; /* Length of data buffer */
};
dev_set_drvdata(&dev->dev, data);
}
+/**
+ * i2c_lock_adapter - Prevent access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+ mutex_lock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_unlock_adapter - Reauthorize access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+ mutex_unlock(&adapter->bus_lock);
+}
+
/*flags for the client struct: */
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
#define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
* methods; erase() is optional. set_gain() and set_autocenter() need
* only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER
* bits.
+ *
+ * Note that playback(), set_gain() and set_autocenter() are called with
+ * dev->event_lock spinlock held and interrupts off and thus may not
+ * sleep.
*/
struct ff_device {
int (*upload)(struct input_dev *dev, struct ff_effect *effect,
typedef struct {
int mp_mrru; /* unused */
- struct sk_buff_head frags; /* fragments sl list */
+ struct sk_buff * frags; /* fragments sl list -- use skb->next */
long frames; /* number of frames in the frame list */
unsigned int seq; /* last processed packet seq #: any packets
* with smaller seq # will be dropped
#endif
#define KVM_CAP_IOEVENTFD 36
#define KVM_CAP_SET_IDENTITY_MAP_ADDR 37
+/* KVM upstream has more features, but we synched this number.
+ Linux, please remove this comment on rebase. */
+#define KVM_CAP_PPC_SEGSTATE 43
#ifdef KVM_CAP_IRQ_ROUTING
__le64 de_rsv;
};
-/**
- * struct nilfs_dat_group_desc - block group descriptor
- * @dg_nfrees: number of free virtual block numbers in block group
- */
-struct nilfs_dat_group_desc {
- __le32 dg_nfrees;
-};
-
-
/**
* struct nilfs_snapshot_list - snapshot list
* @ssl_next: next checkpoint number on snapshot list
#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450
#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451
#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458
-#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b
+#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
#define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F
#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090
#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091
#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */
#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */
#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATTRO_A 0x0120 /* 2x 16550A, half of 4 port */
+#define PCI_DEVICE_ID_LAVA_QUATTRO_B 0x0121 /* 2x 16550A, half of 4 port */
#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */
#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */
#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */
#define PCI_DEVICE_ID_MPC8536 0x0051
#define PCI_DEVICE_ID_P2020E 0x0070
#define PCI_DEVICE_ID_P2020 0x0071
+#define PCI_DEVICE_ID_P2010E 0x0078
+#define PCI_DEVICE_ID_P2010 0x0079
+#define PCI_DEVICE_ID_P1020E 0x0100
+#define PCI_DEVICE_ID_P1020 0x0101
+#define PCI_DEVICE_ID_P1011E 0x0108
+#define PCI_DEVICE_ID_P1011 0x0109
+#define PCI_DEVICE_ID_P1022E 0x0110
+#define PCI_DEVICE_ID_P1022 0x0111
+#define PCI_DEVICE_ID_P1013E 0x0118
+#define PCI_DEVICE_ID_P1013 0x0119
+#define PCI_DEVICE_ID_P4080E 0x0400
+#define PCI_DEVICE_ID_P4080 0x0401
+#define PCI_DEVICE_ID_P4040E 0x0408
+#define PCI_DEVICE_ID_P4040 0x0409
#define PCI_DEVICE_ID_MPC8641 0x7010
#define PCI_DEVICE_ID_MPC8641D 0x7011
#define PCI_DEVICE_ID_MPC8610 0x7018
#define pm_notifier(fn, pri) do { (void)(fn); } while (0)
#endif /* !CONFIG_PM_SLEEP */
+extern struct mutex pm_mutex;
+
#ifndef CONFIG_HIBERNATION
static inline void register_nosave_region(unsigned long b, unsigned long e)
{
static inline void register_nosave_region_late(unsigned long b, unsigned long e)
{
}
-#endif
-extern struct mutex pm_mutex;
+static inline void lock_system_sleep(void) {}
+static inline void unlock_system_sleep(void) {}
+
+#else
+
+/* Let some subsystems like memory hotadd exclude hibernation */
+
+static inline void lock_system_sleep(void)
+{
+ mutex_lock(&pm_mutex);
+}
+
+static inline void unlock_system_sleep(void)
+{
+ mutex_unlock(&pm_mutex);
+}
+#endif
#endif /* _LINUX_SUSPEND_H */
#define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */
#define VT_EVENT_RESIZE 0x0008 /* Resize display */
#define VT_MAX_EVENT 0x000F
- unsigned int old; /* Old console */
- unsigned int new; /* New console (if changing) */
+ unsigned int oldev; /* Old console */
+ unsigned int newev; /* New console (if changing) */
unsigned int pad[4]; /* Padding for expansion */
};
}
/* These are for NAT. Icky. */
-/* Update TCP window tracking data when NAT mangles the packet */
-extern void nf_conntrack_tcp_update(const struct sk_buff *skb,
- unsigned int dataoff,
- struct nf_conn *ct, int dir,
- s16 offset);
+extern s16 (*nf_ct_nat_offset)(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq);
/* Fake conntrack entry for untracked connections */
extern struct nf_conn nf_conntrack_untracked;
* to port ct->master->saved_proto. */
extern void nf_nat_follow_master(struct nf_conn *ct,
struct nf_conntrack_expect *this);
+
+extern s16 nf_nat_get_offset(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq);
#endif
void sctp_assoc_del_nonprimary_peers(struct sctp_association *,
struct sctp_transport *);
int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *,
- gfp_t);
+ sctp_scope_t, gfp_t);
int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *,
struct sctp_cookie*,
gfp_t gfp);
static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
{
- switch (target_type) {
- case 1:
- if (shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION)
- return target_type;
- case 2:
- if (shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION)
- return target_type;
- case 3:
- if (shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION)
- return target_type;
- }
+ static unsigned char cap[] = { 0,
+ SHOST_DIF_TYPE1_PROTECTION,
+ SHOST_DIF_TYPE2_PROTECTION,
+ SHOST_DIF_TYPE3_PROTECTION };
- return 0;
+ return shost->prot_capabilities & cap[target_type] ? target_type : 0;
}
static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
{
#if defined(CONFIG_BLK_DEV_INTEGRITY)
- switch (target_type) {
- case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
- case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
- case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
- case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
- }
+ static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION,
+ SHOST_DIX_TYPE1_PROTECTION,
+ SHOST_DIX_TYPE2_PROTECTION,
+ SHOST_DIX_TYPE3_PROTECTION };
+
+ return shost->prot_capabilities & cap[target_type];
#endif
return 0;
}
Enable kernel support for various performance events provided
by software and hardware.
- Software events are supported either build-in or via the
+ Software events are supported either built-in or via the
use of generic tracepoints.
Most modern CPUs support performance events via performance
used to profile the code that runs on that CPU.
The Linux Performance Event subsystem provides an abstraction of
- these software and hardware cevent apabilities, available via a
+ these software and hardware event capabilities, available via a
system call and used by the "perf" utility in tools/perf/. It
provides per task and per CPU counters, and it provides event
capabilities on top of those.
if (!(status & IRQ_SPURIOUS_DISABLED))
continue;
+ local_irq_disable();
try_one_irq(i, desc);
+ local_irq_enable();
}
}
}
EXPORT_SYMBOL(kthread_create);
-/**
- * kthread_bind - bind a just-created kthread to a cpu.
- * @k: thread created by kthread_create().
- * @cpu: cpu (might not be online, must be possible) for @k to run on.
- *
- * Description: This function is equivalent to set_cpus_allowed(),
- * except that @cpu doesn't need to be online, and the thread must be
- * stopped (i.e., just returned from kthread_create()).
- */
-void kthread_bind(struct task_struct *k, unsigned int cpu)
-{
- /* Must have done schedule() in kthread() before we set_task_cpu */
- if (!wait_task_inactive(k, TASK_UNINTERRUPTIBLE)) {
- WARN_ON(1);
- return;
- }
- set_task_cpu(k, cpu);
- k->cpus_allowed = cpumask_of_cpu(cpu);
- k->rt.nr_cpus_allowed = 1;
- k->flags |= PF_THREAD_BOUND;
-}
-EXPORT_SYMBOL(kthread_bind);
-
/**
* kthread_stop - stop a thread created by kthread_create().
* @k: thread created by kthread_create().
NUM_RCU_LVL_2, \
NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \
}, \
- .signaled = RCU_SIGNAL_INIT, \
+ .signaled = RCU_GP_IDLE, \
.gpnum = -300, \
.completed = -300, \
.onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \
* irqs disabled.
*/
rcu_for_each_node_breadth_first(rsp, rnp) {
- spin_lock(&rnp->lock); /* irqs already disabled. */
+ spin_lock(&rnp->lock); /* irqs already disabled. */
rcu_preempt_check_blocked_tasks(rnp);
rnp->qsmask = rnp->qsmaskinit;
rnp->gpnum = rsp->gpnum;
- spin_unlock(&rnp->lock); /* irqs already disabled. */
+ spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
+ rnp = rcu_get_root(rsp);
+ spin_lock(&rnp->lock); /* irqs already disabled. */
rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state now OK. */
+ spin_unlock(&rnp->lock); /* irqs remain disabled. */
spin_unlock_irqrestore(&rsp->onofflock, flags);
}
{
WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
rsp->completed = rsp->gpnum;
+ rsp->signaled = RCU_GP_IDLE;
rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */
}
}
spin_unlock(&rnp->lock);
switch (signaled) {
+ case RCU_GP_IDLE:
case RCU_GP_INIT:
- break; /* grace period still initializing, ignore. */
+ break; /* grace period idle or initializing, ignore. */
case RCU_SAVE_DYNTICK:
/* Update state, record completion counter. */
spin_lock(&rnp->lock);
- if (lastcomp == rsp->completed) {
+ if (lastcomp == rsp->completed &&
+ rsp->signaled == RCU_SAVE_DYNTICK) {
rsp->signaled = RCU_FORCE_QS;
dyntick_record_completed(rsp, lastcomp);
}
};
/* Values for signaled field in struct rcu_state. */
-#define RCU_GP_INIT 0 /* Grace period being initialized. */
-#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */
-#define RCU_FORCE_QS 2 /* Need to force quiescent state. */
+#define RCU_GP_IDLE 0 /* No grace period in progress. */
+#define RCU_GP_INIT 1 /* Grace period being initialized. */
+#define RCU_SAVE_DYNTICK 2 /* Need to scan dyntick state. */
+#define RCU_FORCE_QS 3 /* Need to force quiescent state. */
#ifdef CONFIG_NO_HZ
#define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK
#else /* #ifdef CONFIG_NO_HZ */
*/
static DEFINE_SPINLOCK(task_group_lock);
+#ifdef CONFIG_FAIR_GROUP_SCHED
+
#ifdef CONFIG_SMP
static int root_task_group_empty(void)
{
}
#endif
-#ifdef CONFIG_FAIR_GROUP_SCHED
#ifdef CONFIG_USER_SCHED
# define INIT_TASK_GROUP_LOAD (2*NICE_0_LOAD)
#else /* !CONFIG_USER_SCHED */
p->sched_class->prio_changed(rq, p, oldprio, running);
}
+/**
+ * kthread_bind - bind a just-created kthread to a cpu.
+ * @p: thread created by kthread_create().
+ * @cpu: cpu (might not be online, must be possible) for @k to run on.
+ *
+ * Description: This function is equivalent to set_cpus_allowed(),
+ * except that @cpu doesn't need to be online, and the thread must be
+ * stopped (i.e., just returned from kthread_create()).
+ *
+ * Function lives here instead of kthread.c because it messes with
+ * scheduler internals which require locking.
+ */
+void kthread_bind(struct task_struct *p, unsigned int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ unsigned long flags;
+
+ /* Must have done schedule() in kthread() before we set_task_cpu */
+ if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) {
+ WARN_ON(1);
+ return;
+ }
+
+ spin_lock_irqsave(&rq->lock, flags);
+ set_task_cpu(p, cpu);
+ p->cpus_allowed = cpumask_of_cpu(cpu);
+ p->rt.nr_cpus_allowed = 1;
+ p->flags |= PF_THREAD_BOUND;
+ spin_unlock_irqrestore(&rq->lock, flags);
+}
+EXPORT_SYMBOL(kthread_bind);
+
#ifdef CONFIG_SMP
/*
* Is this task likely cache-hot:
/*
* Buddy candidates are cache hot:
*/
- if (sched_feat(CACHE_HOT_BUDDY) &&
+ if (sched_feat(CACHE_HOT_BUDDY) && this_rq()->nr_running &&
(&p->se == cfs_rq_of(&p->se)->next ||
&p->se == cfs_rq_of(&p->se)->last))
return 1;
current->sched_class = &fair_sched_class;
/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
- alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
+ zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
#ifdef CONFIG_SMP
#ifdef CONFIG_NO_HZ
- alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
+ zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
#endif
- alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
+ zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
#endif /* SMP */
perf_event_init();
* re-elected due to buddy favours.
*/
clear_buddies(cfs_rq, curr);
+ return;
+ }
+
+ /*
+ * Ensure that a task that missed wakeup preemption by a
+ * narrow margin doesn't have to wait for a full slice.
+ * This also mitigates buddy induced latencies under load.
+ */
+ if (!sched_feat(WAKEUP_PREEMPT))
+ return;
+
+ if (delta_exec < sysctl_sched_min_granularity)
+ return;
+
+ if (cfs_rq->nr_running > 1) {
+ struct sched_entity *se = __pick_next_entity(cfs_rq);
+ s64 delta = curr->vruntime - se->vruntime;
+
+ if (delta > ideal_runtime)
+ resched_task(rq_of(cfs_rq)->curr);
}
}
static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq)
{
struct sched_entity *se = __pick_next_entity(cfs_rq);
- struct sched_entity *buddy;
+ struct sched_entity *left = se;
- if (cfs_rq->next) {
- buddy = cfs_rq->next;
- cfs_rq->next = NULL;
- if (wakeup_preempt_entity(buddy, se) < 1)
- return buddy;
- }
+ if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, left) < 1)
+ se = cfs_rq->next;
- if (cfs_rq->last) {
- buddy = cfs_rq->last;
- cfs_rq->last = NULL;
- if (wakeup_preempt_entity(buddy, se) < 1)
- return buddy;
- }
+ /*
+ * Prefer last buddy, try to return the CPU to a preempted task.
+ */
+ if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, left) < 1)
+ se = cfs_rq->last;
+
+ clear_buddies(cfs_rq, se);
return se;
}
struct sched_entity *se = &curr->se, *pse = &p->se;
struct cfs_rq *cfs_rq = task_cfs_rq(curr);
int sync = wake_flags & WF_SYNC;
+ int scale = cfs_rq->nr_running >= sched_nr_latency;
update_curr(cfs_rq);
if (unlikely(se == pse))
return;
- /*
- * Only set the backward buddy when the current task is still on the
- * rq. This can happen when a wakeup gets interleaved with schedule on
- * the ->pre_schedule() or idle_balance() point, either of which can
- * drop the rq lock.
- *
- * Also, during early boot the idle thread is in the fair class, for
- * obvious reasons its a bad idea to schedule back to the idle thread.
- */
- if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle))
- set_last_buddy(se);
- if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK))
+ if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK))
set_next_buddy(pse);
/*
BUG_ON(!pse);
- if (wakeup_preempt_entity(se, pse) == 1)
+ if (wakeup_preempt_entity(se, pse) == 1) {
resched_task(curr);
+ /*
+ * Only set the backward buddy when the current task is still
+ * on the rq. This can happen when a wakeup gets interleaved
+ * with schedule on the ->pre_schedule() or idle_balance()
+ * point, either of which can * drop the rq lock.
+ *
+ * Also, during early boot the idle thread is in the fair class,
+ * for obvious reasons its a bad idea to schedule back to it.
+ */
+ if (unlikely(!se->on_rq || curr == rq->idle))
+ return;
+ if (sched_feat(LAST_BUDDY) && scale && entity_is_task(se))
+ set_last_buddy(se);
+ }
}
static struct task_struct *pick_next_task_fair(struct rq *rq)
ret = ftrace_process_regex(parser->buffer,
parser->idx, enable);
if (ret)
- goto out;
+ goto out_unlock;
trace_parser_clear(parser);
}
ret = read;
-
+out_unlock:
mutex_unlock(&ftrace_regex_lock);
-out:
+
return ret;
}
atomic_inc(&cpu_buffer->record_disabled);
synchronize_sched();
+ spin_lock_irq(&cpu_buffer->reader_lock);
rb_head_page_deactivate(cpu_buffer);
for (i = 0; i < nr_pages; i++) {
return;
rb_reset_cpu(cpu_buffer);
+ spin_unlock_irq(&cpu_buffer->reader_lock);
rb_check_pages(cpu_buffer);
*/
static void free_user(struct user_struct *up, unsigned long flags)
{
- spin_unlock_irqrestore(&uidhash_lock, flags);
INIT_DELAYED_WORK(&up->work, cleanup_user_struct);
schedule_delayed_work(&up->work, msecs_to_jiffies(1000));
+ spin_unlock_irqrestore(&uidhash_lock, flags);
}
#else /* CONFIG_USER_SCHED && CONFIG_SYSFS */
if (!works)
return -ENOMEM;
+ get_online_cpus();
+
/*
- * when running in keventd don't schedule a work item on itself.
- * Can just call directly because the work queue is already bound.
- * This also is faster.
- * Make this a generic parameter for other workqueues?
+ * When running in keventd don't schedule a work item on
+ * itself. Can just call directly because the work queue is
+ * already bound. This also is faster.
*/
- if (current_is_keventd()) {
+ if (current_is_keventd())
orig = raw_smp_processor_id();
- INIT_WORK(per_cpu_ptr(works, orig), func);
- func(per_cpu_ptr(works, orig));
- }
- get_online_cpus();
for_each_online_cpu(cpu) {
struct work_struct *work = per_cpu_ptr(works, cpu);
- if (cpu == orig)
- continue;
INIT_WORK(work, func);
- schedule_work_on(cpu, work);
- }
- for_each_online_cpu(cpu) {
if (cpu != orig)
- flush_work(per_cpu_ptr(works, cpu));
+ schedule_work_on(cpu, work);
}
+ if (orig >= 0)
+ func(per_cpu_ptr(works, orig));
+
+ for_each_online_cpu(cpu)
+ flush_work(per_cpu_ptr(works, cpu));
+
put_online_cpus();
free_percpu(works);
return 0;
err_printk(ref->dev, entry, "DMA-API: device driver frees "
"DMA memory with different CPU address "
"[device address=0x%016llx] [size=%llu bytes] "
- "[cpu alloc address=%p] [cpu free address=%p]",
+ "[cpu alloc address=0x%016llx] "
+ "[cpu free address=0x%016llx]",
ref->dev_addr, ref->size,
- (void *)entry->paddr, (void *)ref->paddr);
+ (unsigned long long)entry->paddr,
+ (unsigned long long)ref->paddr);
}
if (ref->sg_call_ents && ref->type == dma_debug_sg &&
#undef strcmp
int strcmp(const char *cs, const char *ct)
{
- signed char __res;
+ unsigned char c1, c2;
while (1) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
+ c1 = *cs++;
+ c2 = *ct++;
+ if (c1 != c2)
+ return c1 < c2 ? -1 : 1;
+ if (!c1)
break;
}
- return __res;
+ return 0;
}
EXPORT_SYMBOL(strcmp);
#endif
*/
int strncmp(const char *cs, const char *ct, size_t count)
{
- signed char __res = 0;
+ unsigned char c1, c2;
while (count) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
+ c1 = *cs++;
+ c2 = *ct++;
+ if (c1 != c2)
+ return c1 < c2 ? -1 : 1;
+ if (!c1)
break;
count--;
}
- return __res;
+ return 0;
}
EXPORT_SYMBOL(strncmp);
#endif
config MEMORY_HOTPLUG
bool "Allow for memory hot-add"
depends on SPARSEMEM || X86_64_ACPI_NUMA
- depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
+ depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG
depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
-comment "Memory hotplug is currently incompatible with Software Suspend"
- depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
-
config MEMORY_HOTPLUG_SPARSE
def_bool y
depends on SPARSEMEM && MEMORY_HOTPLUG
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ bdi_prune_sb(bdi);
+
if (!bdi_cap_flush_forker(bdi))
bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
spin_unlock(&inode_lock);
}
- bdi_prune_sb(bdi);
bdi_unregister(bdi);
for (i = 0; i < NR_BDI_STAT_ITEMS; i++)
void debug_kmap_atomic(enum km_type type)
{
- static unsigned warn_count = 10;
+ static int warn_count = 10;
- if (unlikely(warn_count == 0))
+ if (unlikely(warn_count < 0))
return;
if (unlikely(in_interrupt())) {
- if (in_irq()) {
+ if (in_nmi()) {
+ if (type != KM_NMI && type != KM_NMI_PTE) {
+ WARN_ON(1);
+ warn_count--;
+ }
+ } else if (in_irq()) {
if (type != KM_IRQ0 && type != KM_IRQ1 &&
type != KM_BIO_SRC_IRQ && type != KM_BIO_DST_IRQ &&
- type != KM_BOUNCE_READ) {
+ type != KM_BOUNCE_READ && type != KM_IRQ_PTE) {
WARN_ON(1);
warn_count--;
}
}
if (type == KM_IRQ0 || type == KM_IRQ1 || type == KM_BOUNCE_READ ||
- type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ) {
+ type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ ||
+ type == KM_IRQ_PTE || type == KM_NMI ||
+ type == KM_NMI_PTE ) {
if (!irqs_disabled()) {
WARN_ON(1);
warn_count--;
struct rmap_item *tree_rmap_item;
int ret;
+ cond_resched();
tree_rmap_item = rb_entry(*new, struct rmap_item, node);
page2[0] = get_mergeable_page(tree_rmap_item);
if (!page2[0])
#include <linux/migrate.h>
#include <linux/page-isolation.h>
#include <linux/pfn.h>
+#include <linux/suspend.h>
#include <asm/tlbflush.h>
}
#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
-static pg_data_t *hotadd_new_pgdat(int nid, u64 start)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
{
struct pglist_data *pgdat;
unsigned long zones_size[MAX_NR_ZONES] = {0};
struct resource *res;
int ret;
+ lock_system_sleep();
+
res = register_memory_resource(start, size);
+ ret = -EEXIST;
if (!res)
- return -EEXIST;
+ goto out;
if (!node_online(nid)) {
pgdat = hotadd_new_pgdat(nid, start);
+ ret = -ENOMEM;
if (!pgdat)
- return -ENOMEM;
+ goto out;
new_pgdat = 1;
}
BUG_ON(ret);
}
- return ret;
+ goto out;
+
error:
/* rollback pgdat allocation and others */
if (new_pgdat)
if (res)
release_memory_resource(res);
+out:
+ unlock_system_sleep();
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
if (!test_pages_in_a_zone(start_pfn, end_pfn))
return -EINVAL;
+ lock_system_sleep();
+
zone = page_zone(pfn_to_page(start_pfn));
node = zone_to_nid(zone);
nr_pages = end_pfn - start_pfn;
/* set above range as isolated */
ret = start_isolate_page_range(start_pfn, end_pfn);
if (ret)
- return ret;
+ goto out;
arg.start_pfn = start_pfn;
arg.nr_pages = nr_pages;
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
+ unlock_system_sleep();
return 0;
failed_removal:
/* pushback to free area */
undo_isolate_page_range(start_pfn, end_pfn);
+out:
+ unlock_system_sleep();
return ret;
}
struct page *newpage = get_new_page(page, private, &result);
int rcu_locked = 0;
int charge = 0;
- struct mem_cgroup *mem;
+ struct mem_cgroup *mem = NULL;
if (!newpage)
return -ENOMEM;
* See also cpuset_zone_allowed() comment in kernel/cpuset.c.
*/
alloc_flags &= ~ALLOC_CPUSET;
- } else if (unlikely(rt_task(p)))
+ } else if (unlikely(rt_task(p)) && !in_interrupt())
alloc_flags |= ALLOC_HARDER;
if (likely(!(gfp_mask & __GFP_NOMEMALLOC))) {
if (NUMA_BUILD && (gfp_mask & GFP_THISNODE) == GFP_THISNODE)
goto nopage;
+restart:
wake_all_kswapd(order, zonelist, high_zoneidx);
-restart:
/*
* OK, we're below the kswapd watermark and have kicked background
* reclaim. Now things get more complex, so set up alloc_flags according
}
/**
- * pcpu_extend_area_map - extend area map for allocation
- * @chunk: target chunk
+ * pcpu_need_to_extend - determine whether chunk area map needs to be extended
+ * @chunk: chunk of interest
*
- * Extend area map of @chunk so that it can accomodate an allocation.
- * A single allocation can split an area into three areas, so this
- * function makes sure that @chunk->map has at least two extra slots.
+ * Determine whether area map of @chunk needs to be extended to
+ * accomodate a new allocation.
*
* CONTEXT:
- * pcpu_alloc_mutex, pcpu_lock. pcpu_lock is released and reacquired
- * if area map is extended.
+ * pcpu_lock.
*
* RETURNS:
- * 0 if noop, 1 if successfully extended, -errno on failure.
+ * New target map allocation length if extension is necessary, 0
+ * otherwise.
*/
-static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags)
+static int pcpu_need_to_extend(struct pcpu_chunk *chunk)
{
int new_alloc;
- int *new;
- size_t size;
- /* has enough? */
if (chunk->map_alloc >= chunk->map_used + 2)
return 0;
- spin_unlock_irqrestore(&pcpu_lock, *flags);
-
new_alloc = PCPU_DFL_MAP_ALLOC;
while (new_alloc < chunk->map_used + 2)
new_alloc *= 2;
- new = pcpu_mem_alloc(new_alloc * sizeof(new[0]));
- if (!new) {
- spin_lock_irqsave(&pcpu_lock, *flags);
+ return new_alloc;
+}
+
+/**
+ * pcpu_extend_area_map - extend area map of a chunk
+ * @chunk: chunk of interest
+ * @new_alloc: new target allocation length of the area map
+ *
+ * Extend area map of @chunk to have @new_alloc entries.
+ *
+ * CONTEXT:
+ * Does GFP_KERNEL allocation. Grabs and releases pcpu_lock.
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc)
+{
+ int *old = NULL, *new = NULL;
+ size_t old_size = 0, new_size = new_alloc * sizeof(new[0]);
+ unsigned long flags;
+
+ new = pcpu_mem_alloc(new_size);
+ if (!new)
return -ENOMEM;
- }
- /*
- * Acquire pcpu_lock and switch to new area map. Only free
- * could have happened inbetween, so map_used couldn't have
- * grown.
- */
- spin_lock_irqsave(&pcpu_lock, *flags);
- BUG_ON(new_alloc < chunk->map_used + 2);
+ /* acquire pcpu_lock and switch to new area map */
+ spin_lock_irqsave(&pcpu_lock, flags);
+
+ if (new_alloc <= chunk->map_alloc)
+ goto out_unlock;
- size = chunk->map_alloc * sizeof(chunk->map[0]);
- memcpy(new, chunk->map, size);
+ old_size = chunk->map_alloc * sizeof(chunk->map[0]);
+ memcpy(new, chunk->map, old_size);
/*
* map_alloc < PCPU_DFL_MAP_ALLOC indicates that the chunk is
* one of the first chunks and still using static map.
*/
if (chunk->map_alloc >= PCPU_DFL_MAP_ALLOC)
- pcpu_mem_free(chunk->map, size);
+ old = chunk->map;
chunk->map_alloc = new_alloc;
chunk->map = new;
+ new = NULL;
+
+out_unlock:
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+
+ /*
+ * pcpu_mem_free() might end up calling vfree() which uses
+ * IRQ-unsafe lock and thus can't be called under pcpu_lock.
+ */
+ pcpu_mem_free(old, old_size);
+ pcpu_mem_free(new, new_size);
+
return 0;
}
static int warn_limit = 10;
struct pcpu_chunk *chunk;
const char *err;
- int slot, off;
+ int slot, off, new_alloc;
unsigned long flags;
if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
/* serve reserved allocations from the reserved chunk if available */
if (reserved && pcpu_reserved_chunk) {
chunk = pcpu_reserved_chunk;
- if (size > chunk->contig_hint ||
- pcpu_extend_area_map(chunk, &flags) < 0) {
- err = "failed to extend area map of reserved chunk";
+
+ if (size > chunk->contig_hint) {
+ err = "alloc from reserved chunk failed";
goto fail_unlock;
}
+
+ while ((new_alloc = pcpu_need_to_extend(chunk))) {
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ if (pcpu_extend_area_map(chunk, new_alloc) < 0) {
+ err = "failed to extend area map of reserved chunk";
+ goto fail_unlock_mutex;
+ }
+ spin_lock_irqsave(&pcpu_lock, flags);
+ }
+
off = pcpu_alloc_area(chunk, size, align);
if (off >= 0)
goto area_found;
+
err = "alloc from reserved chunk failed";
goto fail_unlock;
}
if (size > chunk->contig_hint)
continue;
- switch (pcpu_extend_area_map(chunk, &flags)) {
- case 0:
- break;
- case 1:
- goto restart; /* pcpu_lock dropped, restart */
- default:
- err = "failed to extend area map";
- goto fail_unlock;
+ new_alloc = pcpu_need_to_extend(chunk);
+ if (new_alloc) {
+ spin_unlock_irqrestore(&pcpu_lock, flags);
+ if (pcpu_extend_area_map(chunk,
+ new_alloc) < 0) {
+ err = "failed to extend area map";
+ goto fail_unlock_mutex;
+ }
+ spin_lock_irqsave(&pcpu_lock, flags);
+ /*
+ * pcpu_lock has been dropped, need to
+ * restart cpu_slot list walking.
+ */
+ goto restart;
}
off = pcpu_alloc_area(chunk, size, align);
if (ngrp)
vlan_gvrp_uninit_applicant(real_dev);
out_free_group:
- if (ngrp)
- vlan_group_free(ngrp);
+ if (ngrp) {
+ hlist_del_rcu(&ngrp->hlist);
+ /* Free the group, after all cpu's are done. */
+ call_rcu(&ngrp->rcu, vlan_rcu_free);
+ }
return err;
}
conn->type = type;
conn->mode = HCI_CM_ACTIVE;
conn->state = BT_OPEN;
+ conn->auth_type = HCI_AT_GENERAL_BONDING;
conn->power_save = 1;
conn->disc_timeout = HCI_DISCONN_TIMEOUT;
{
struct l2cap_pinfo *pi = l2cap_pi(sk);
struct l2cap_conf_req *req = data;
- struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_ERTM };
+ struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
void *ptr = req->data;
BT_DBG("sk %p", sk);
rfc.monitor_timeout = L2CAP_DEFAULT_MONITOR_TO;
pi->conf_state |= L2CAP_CONF_MODE_DONE;
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
break;
case L2CAP_MODE_STREAMING:
pi->max_pdu_size = rfc.max_pdu_size;
pi->conf_state |= L2CAP_CONF_MODE_DONE;
+
+ l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
+ sizeof(rfc), (unsigned long) &rfc);
+
break;
default:
rfc.mode = pi->mode;
}
- l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
- sizeof(rfc), (unsigned long) &rfc);
-
if (result == L2CAP_CONF_SUCCESS)
pi->conf_state |= L2CAP_CONF_OUTPUT_DONE;
}
struct net_bridge_port *p;
int err = 0;
- if (dev->flags & IFF_LOOPBACK || dev->type != ARPHRD_ETHER)
+ /* Don't allow bridging non-ethernet like devices */
+ if ((dev->flags & IFF_LOOPBACK) ||
+ dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN)
return -EINVAL;
+ /* No bridging of bridges */
if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit)
return -ELOOP;
+ /* Device is already being bridged */
if (dev->br_port != NULL)
return -EBUSY;
/*
* procfs functions
*/
-static char *bcm_proc_getifname(int ifindex)
+static char *bcm_proc_getifname(char *result, int ifindex)
{
struct net_device *dev;
if (!ifindex)
return "any";
- /* no usage counting */
+ read_lock(&dev_base_lock);
dev = __dev_get_by_index(&init_net, ifindex);
if (dev)
- return dev->name;
+ strcpy(result, dev->name);
+ else
+ strcpy(result, "???");
+ read_unlock(&dev_base_lock);
- return "???";
+ return result;
}
static int bcm_proc_show(struct seq_file *m, void *v)
{
+ char ifname[IFNAMSIZ];
struct sock *sk = (struct sock *)m->private;
struct bcm_sock *bo = bcm_sk(sk);
struct bcm_op *op;
seq_printf(m, " / sk %p", sk);
seq_printf(m, " / bo %p", bo);
seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs);
- seq_printf(m, " / bound %s", bcm_proc_getifname(bo->ifindex));
+ seq_printf(m, " / bound %s", bcm_proc_getifname(ifname, bo->ifindex));
seq_printf(m, " <<<\n");
list_for_each_entry(op, &bo->rx_ops, list) {
continue;
seq_printf(m, "rx_op: %03X %-5s ",
- op->can_id, bcm_proc_getifname(op->ifindex));
+ op->can_id, bcm_proc_getifname(ifname, op->ifindex));
seq_printf(m, "[%d]%c ", op->nframes,
(op->flags & RX_CHECK_DLC)?'d':' ');
if (op->kt_ival1.tv64)
list_for_each_entry(op, &bo->tx_ops, list) {
seq_printf(m, "tx_op: %03X %s [%d] ",
- op->can_id, bcm_proc_getifname(op->ifindex),
+ op->can_id,
+ bcm_proc_getifname(ifname, op->ifindex),
op->nframes);
if (op->kt_ival1.tv64)
ret = notifier_to_errno(ret);
if (ret) {
- if (err) {
- printk(KERN_ERR
- "%s: name change rollback failed: %d.\n",
- dev->name, ret);
- } else {
+ /* err >= 0 after dev_alloc_name() or stores the first errno */
+ if (err >= 0) {
err = ret;
memcpy(dev->name, oldname, IFNAMSIZ);
goto rollback;
+ } else {
+ printk(KERN_ERR
+ "%s: name change rollback failed: %d.\n",
+ dev->name, ret);
}
}
NAPI_GRO_CB(skb)->free = 1;
goto done;
- }
+ } else if (skb_gro_len(p) != pinfo->gso_size)
+ return -E2BIG;
headroom = skb_headroom(p);
nskb = netdev_alloc_skb(p->dev, headroom + skb_gro_offset(p));
return -ENODEV;
rv = -ENODEV;
- if (dev->dn_ptr != NULL) {
+ if (dev->dn_ptr != NULL)
rv = dn_dev_set_default(dev, 1);
- if (rv)
- dev_put(dev);
- }
+ if (rv)
+ dev_put(dev);
}
return rv;
goto tx_error;
}
- if (tiph->frag_off)
+ df |= old_iph->frag_off & htons(IP_DF);
+
+ if (df) {
mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr);
- else
- mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu;
- if (mtu < 68) {
- stats->collisions++;
- ip_rt_put(rt);
- goto tx_error;
- }
- if (skb_dst(skb))
- skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
+ if (mtu < 68) {
+ stats->collisions++;
+ ip_rt_put(rt);
+ goto tx_error;
+ }
- df |= (old_iph->frag_off&htons(IP_DF));
+ if (skb_dst(skb))
+ skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu);
- if ((old_iph->frag_off&htons(IP_DF)) && mtu < ntohs(old_iph->tot_len)) {
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));
- ip_rt_put(rt);
- goto tx_error;
+ if ((old_iph->frag_off & htons(IP_DF)) &&
+ mtu < ntohs(old_iph->tot_len)) {
+ icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
+ htonl(mtu));
+ ip_rt_put(rt);
+ goto tx_error;
+ }
}
if (tunnel->err_count > 0) {
return -EINVAL;
}
- if ((in_dev = __in_dev_get_rtnl(dev)) == NULL)
+ if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) {
+ dev_put(dev);
return -EADDRNOTAVAIL;
+ }
IPV4_DEVCONF(in_dev->cnf, MC_FORWARDING)++;
ip_rt_multicast_event(in_dev);
BUG_ON(nfnetlink_parse_nat_setup_hook != NULL);
rcu_assign_pointer(nfnetlink_parse_nat_setup_hook,
nfnetlink_parse_nat_setup);
+ BUG_ON(nf_ct_nat_offset != NULL);
+ rcu_assign_pointer(nf_ct_nat_offset, nf_nat_get_offset);
return 0;
cleanup_extend:
nf_ct_extend_unregister(&nat_extend);
rcu_assign_pointer(nf_nat_seq_adjust_hook, NULL);
rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, NULL);
+ rcu_assign_pointer(nf_ct_nat_offset, NULL);
synchronize_net();
}
DUMP_OFFSET(this_way);
}
+/* Get the offset value, for conntrack */
+s16 nf_nat_get_offset(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq)
+{
+ struct nf_conn_nat *nat = nfct_nat(ct);
+ struct nf_nat_seq *this_way;
+ s16 offset;
+
+ if (!nat)
+ return 0;
+
+ this_way = &nat->seq[dir];
+ spin_lock_bh(&nf_nat_seqofs_lock);
+ offset = after(seq, this_way->correction_pos)
+ ? this_way->offset_after : this_way->offset_before;
+ spin_unlock_bh(&nf_nat_seqofs_lock);
+
+ return offset;
+}
+EXPORT_SYMBOL_GPL(nf_nat_get_offset);
+
/* Frobs data inside this packet, which is linear. */
static void mangle_contents(struct sk_buff *skb,
unsigned int dataoff,
adjust_tcp_sequence(ntohl(tcph->seq),
(int)rep_len - (int)match_len,
ct, ctinfo);
- /* Tell TCP window tracking about seq change */
- nf_conntrack_tcp_update(skb, ip_hdrlen(skb),
- ct, CTINFO2DIR(ctinfo),
- (int)rep_len - (int)match_len);
-
nf_conntrack_event_cache(IPCT_NATSEQADJ, ct);
}
return 1;
tcph->seq = newseq;
tcph->ack_seq = newack;
- if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo))
- return 0;
-
- nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff);
-
- return 1;
+ return nf_nat_sack_adjust(skb, tcph, ct, ctinfo);
}
/* Setup NAT on this expected conntrack so it follows master. */
#if TCP_DEBUG
struct sk_buff *skb = skb_peek(&sk->sk_receive_queue);
- WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq));
+ WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq),
+ KERN_INFO "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n",
+ tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt);
#endif
if (inet_csk_ack_scheduled(sk)) {
/* Now that we have two receive queues this
* shouldn't happen.
*/
- if (before(*seq, TCP_SKB_CB(skb)->seq)) {
- printk(KERN_INFO "recvmsg bug: copied %X "
- "seq %X\n", *seq, TCP_SKB_CB(skb)->seq);
+ if (WARN(before(*seq, TCP_SKB_CB(skb)->seq),
+ KERN_INFO "recvmsg bug: copied %X "
+ "seq %X rcvnxt %X fl %X\n", *seq,
+ TCP_SKB_CB(skb)->seq, tp->rcv_nxt,
+ flags))
break;
- }
+
offset = *seq - TCP_SKB_CB(skb)->seq;
if (tcp_hdr(skb)->syn)
offset--;
if (tcp_hdr(skb)->fin)
goto found_fin_ok;
WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: "
- "copied %X seq %X\n", *seq,
- TCP_SKB_CB(skb)->seq);
+ "copied %X seq %X rcvnxt %X fl %X\n",
+ *seq, TCP_SKB_CB(skb)->seq,
+ tp->rcv_nxt, flags);
}
/* Well, if we have backlog, try to process it now yet. */
return ret;
}
+s16 (*nf_ct_nat_offset)(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq);
+EXPORT_SYMBOL_GPL(nf_ct_nat_offset);
+
int nf_conntrack_init(struct net *net)
{
int ret;
/* For use by REJECT target */
rcu_assign_pointer(ip_ct_attach, nf_conntrack_attach);
rcu_assign_pointer(nf_ct_destroy, destroy_conntrack);
+
+ /* Howto get NAT offsets */
+ rcu_assign_pointer(nf_ct_nat_offset, NULL);
}
return 0;
}
}
+#ifdef CONFIG_NF_NAT_NEEDED
+static inline s16 nat_offset(const struct nf_conn *ct,
+ enum ip_conntrack_dir dir,
+ u32 seq)
+{
+ typeof(nf_ct_nat_offset) get_offset = rcu_dereference(nf_ct_nat_offset);
+
+ return get_offset != NULL ? get_offset(ct, dir, seq) : 0;
+}
+#define NAT_OFFSET(pf, ct, dir, seq) \
+ (pf == NFPROTO_IPV4 ? nat_offset(ct, dir, seq) : 0)
+#else
+#define NAT_OFFSET(pf, ct, dir, seq) 0
+#endif
+
static bool tcp_in_window(const struct nf_conn *ct,
struct ip_ct_tcp *state,
enum ip_conntrack_dir dir,
struct ip_ct_tcp_state *receiver = &state->seen[!dir];
const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple;
__u32 seq, ack, sack, end, win, swin;
+ s16 receiver_offset;
bool res;
/*
if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM)
tcp_sack(skb, dataoff, tcph, &sack);
+ /* Take into account NAT sequence number mangling */
+ receiver_offset = NAT_OFFSET(pf, ct, !dir, ack - 1);
+ ack -= receiver_offset;
+ sack -= receiver_offset;
+
pr_debug("tcp_in_window: START\n");
pr_debug("tcp_in_window: ");
nf_ct_dump_tuple(tuple);
- pr_debug("seq=%u ack=%u sack=%u win=%u end=%u\n",
- seq, ack, sack, win, end);
+ pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n",
+ seq, ack, receiver_offset, sack, receiver_offset, win, end);
pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
"receiver end=%u maxend=%u maxwin=%u scale=%i\n",
sender->td_end, sender->td_maxend, sender->td_maxwin,
pr_debug("tcp_in_window: ");
nf_ct_dump_tuple(tuple);
- pr_debug("seq=%u ack=%u sack =%u win=%u end=%u\n",
- seq, ack, sack, win, end);
+ pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n",
+ seq, ack, receiver_offset, sack, receiver_offset, win, end);
pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
"receiver end=%u maxend=%u maxwin=%u scale=%i\n",
sender->td_end, sender->td_maxend, sender->td_maxwin,
before(seq, sender->td_maxend + 1) ?
after(end, sender->td_end - receiver->td_maxwin - 1) ?
before(sack, receiver->td_end + 1) ?
- after(ack, receiver->td_end - MAXACKWINDOW(sender)) ? "BUG"
+ after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1) ? "BUG"
: "ACK is under the lower bound (possible overly delayed ACK)"
: "ACK is over the upper bound (ACKed data not seen yet)"
: "SEQ is under the lower bound (already ACKed data retransmitted)"
return res;
}
-#ifdef CONFIG_NF_NAT_NEEDED
-/* Update sender->td_end after NAT successfully mangled the packet */
-/* Caller must linearize skb at tcp header. */
-void nf_conntrack_tcp_update(const struct sk_buff *skb,
- unsigned int dataoff,
- struct nf_conn *ct, int dir,
- s16 offset)
-{
- const struct tcphdr *tcph = (const void *)skb->data + dataoff;
- const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir];
- const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[!dir];
- __u32 end;
-
- end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph);
-
- spin_lock_bh(&ct->lock);
- /*
- * We have to worry for the ack in the reply packet only...
- */
- if (ct->proto.tcp.seen[dir].td_end + offset == end)
- ct->proto.tcp.seen[dir].td_end = end;
- ct->proto.tcp.last_end = end;
- spin_unlock_bh(&ct->lock);
- pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i "
- "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
- sender->td_end, sender->td_maxend, sender->td_maxwin,
- sender->td_scale,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
- receiver->td_scale);
-}
-EXPORT_SYMBOL_GPL(nf_conntrack_tcp_update);
-#endif
-
#define TH_FIN 0x01
#define TH_SYN 0x02
#define TH_RST 0x04
const struct nf_conntrack_tuple *tuple,
const union nf_inet_addr *addr,
const union nf_inet_addr *mask,
- const struct xt_match *match)
+ u_int8_t family)
{
const struct nf_conntrack_tuple_hash *found;
struct xt_connlimit_conn *conn;
bool addit = true;
int matches = 0;
-
- if (match->family == NFPROTO_IPV6)
+ if (family == NFPROTO_IPV6)
hash = &data->iphash[connlimit_iphash6(addr, mask)];
else
hash = &data->iphash[connlimit_iphash(addr->ip & mask->ip)];
continue;
}
- if (same_source_net(addr, mask, &conn->tuple.src.u3,
- match->family))
+ if (same_source_net(addr, mask, &conn->tuple.src.u3, family))
/* same source network -> be counted! */
++matches;
nf_ct_put(found_ct);
spin_lock_bh(&info->data->lock);
connections = count_them(info->data, tuple_ptr, &addr,
- &info->mask, par->match);
+ &info->mask, par->family);
spin_unlock_bh(&info->data->lock);
if (connections < 0) {
/*
* Check that the device given is a valid AX.25 interface that is "up".
+ * called whith RTNL
*/
-static struct net_device *rose_ax25_dev_get(char *devname)
+static struct net_device *rose_ax25_dev_find(char *devname)
{
struct net_device *dev;
- if ((dev = dev_get_by_name(&init_net, devname)) == NULL)
+ if ((dev = __dev_get_by_name(&init_net, devname)) == NULL)
return NULL;
if ((dev->flags & IFF_UP) && dev->type == ARPHRD_AX25)
return dev;
- dev_put(dev);
return NULL;
}
case SIOCADDRT:
if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct)))
return -EFAULT;
- if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL)
+ if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL)
return -EINVAL;
- if (rose_dev_exists(&rose_route.address)) { /* Can't add routes to ourself */
- dev_put(dev);
+ if (rose_dev_exists(&rose_route.address)) /* Can't add routes to ourself */
return -EINVAL;
- }
if (rose_route.mask > 10) /* Mask can't be more than 10 digits */
return -EINVAL;
if (rose_route.ndigis > AX25_MAX_DIGIS)
return -EINVAL;
err = rose_add_node(&rose_route, dev);
- dev_put(dev);
return err;
case SIOCDELRT:
if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct)))
return -EFAULT;
- if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL)
+ if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL)
return -EINVAL;
err = rose_del_node(&rose_route, dev);
- dev_put(dev);
return err;
case SIOCRSCLRRT:
* local endpoint and the remote peer.
*/
int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc,
- gfp_t gfp)
+ sctp_scope_t scope, gfp_t gfp)
{
- sctp_scope_t scope;
int flags;
/* Use scoping rules to determine the subset of addresses from
* the endpoint.
*/
- scope = sctp_scope(&asoc->peer.active_path->ipaddr);
flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0;
if (asoc->peer.ipv4_address)
flags |= SCTP_ADDR4_PEERSUPP;
if (!new_asoc)
goto nomem;
+ if (sctp_assoc_set_bind_addr_from_ep(new_asoc,
+ sctp_scope(sctp_source(chunk)),
+ GFP_ATOMIC) < 0)
+ goto nomem_init;
+
/* The call, sctp_process_init(), can fail on memory allocation. */
if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type,
sctp_source(chunk),
len = ntohs(err_chunk->chunk_hdr->length) -
sizeof(sctp_chunkhdr_t);
- if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0)
- goto nomem_init;
-
repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len);
if (!repl)
goto nomem_init;
if (!new_asoc)
goto nomem;
+ if (sctp_assoc_set_bind_addr_from_ep(new_asoc,
+ sctp_scope(sctp_source(chunk)), GFP_ATOMIC) < 0)
+ goto nomem;
+
/* In the outbound INIT ACK the endpoint MUST copy its current
* Verification Tag and Peers Verification tag into a reserved
* place (local tie-tag and per tie-tag) within the state cookie.
sizeof(sctp_chunkhdr_t);
}
- if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0)
- goto nomem;
-
repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len);
if (!repl)
goto nomem;
err = -ENOMEM;
goto out_free;
}
+
+ err = sctp_assoc_set_bind_addr_from_ep(asoc, scope,
+ GFP_KERNEL);
+ if (err < 0) {
+ goto out_free;
+ }
+
}
/* Prime the peer's transport structures. */
walk_size += af->sockaddr_len;
}
- err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL);
- if (err < 0) {
- goto out_free;
- }
-
/* In case the user of sctp_connectx() wants an association
* id back, assign one now.
*/
}
/*
- * New (hopefully final) interface for the API. The option buffer is used
- * both for the returned association id and the addresses.
+ * New (hopefully final) interface for the API.
+ * We use the sctp_getaddrs_old structure so that use-space library
+ * can avoid any unnecessary allocations. The only defferent part
+ * is that we store the actual length of the address buffer into the
+ * addrs_num structure member. That way we can re-use the existing
+ * code.
*/
SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len,
char __user *optval,
int __user *optlen)
{
+ struct sctp_getaddrs_old param;
sctp_assoc_t assoc_id = 0;
int err = 0;
- if (len < sizeof(assoc_id))
+ if (len < sizeof(param))
return -EINVAL;
+ if (copy_from_user(¶m, optval, sizeof(param)))
+ return -EFAULT;
+
err = __sctp_setsockopt_connectx(sk,
- (struct sockaddr __user *)(optval + sizeof(assoc_id)),
- len - sizeof(assoc_id), &assoc_id);
+ (struct sockaddr __user *)param.addrs,
+ param.addr_num, &assoc_id);
if (err == 0 || err == -EINPROGRESS) {
if (copy_to_user(optval, &assoc_id, sizeof(assoc_id)))
goto out_unlock;
}
asoc = new_asoc;
+ err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, GFP_KERNEL);
+ if (err < 0) {
+ err = -ENOMEM;
+ goto out_free;
+ }
/* If the SCTP_INIT ancillary data is specified, set all
* the association init values accordingly.
err = -ENOMEM;
goto out_free;
}
- err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL);
- if (err < 0) {
- err = -ENOMEM;
- goto out_free;
- }
}
/* ASSERT: we have a valid association at this point. */
/* Initialize sk->sk_rcv_saddr, if the transport is the
* association's active path for getsockname().
*/
- if (asoc && (transport == asoc->peer.active_path))
+ if (asoc && (!asoc->peer.primary_path ||
+ (transport == asoc->peer.active_path)))
opt->pf->af->to_sk_saddr(&transport->saddr,
asoc->base.sk);
} else
* @sap: buffer into which to plant socket address
* @salen: size of buffer
*
+ * @uaddr does not have to be '\0'-terminated, but strict_strtoul() and
+ * rpc_pton() require proper string termination to be successful.
+ *
* Returns the size of the socket address if successful; otherwise
* zero is returned.
*/
size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len,
struct sockaddr *sap, const size_t salen)
{
- char *c, buf[RPCBIND_MAXUADDRLEN];
+ char *c, buf[RPCBIND_MAXUADDRLEN + sizeof('\0')];
unsigned long portlo, porthi;
unsigned short port;
- if (uaddr_len > sizeof(buf))
+ if (uaddr_len > RPCBIND_MAXUADDRLEN)
return 0;
memcpy(buf, uaddr, uaddr_len);
- buf[uaddr_len] = '\n';
- buf[uaddr_len + 1] = '\0';
-
+ buf[uaddr_len] = '\0';
c = strrchr(buf, '.');
if (unlikely(c == NULL))
return 0;
if (unlikely(portlo > 255))
return 0;
- c[0] = '\n';
- c[1] = '\0';
-
+ *c = '\0';
c = strrchr(buf, '.');
if (unlikely(c == NULL))
return 0;
port = (unsigned short)((porthi << 8) | portlo);
- c[0] = '\0';
-
+ *c = '\0';
if (rpc_pton(buf, strlen(buf), sap, salen) == 0)
return 0;
return d;
}
-struct data data_append_markers(struct data d, struct marker *m)
+static struct data data_append_markers(struct data d, struct marker *m)
{
struct marker **mp = &d.markers;
* USA
*/
-%option noyywrap nounput yylineno
+%option noyywrap noinput nounput yylineno
%x INCLUDE
%x BYTESTRING
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 34
+#define YY_FLEX_SUBMINOR_VERSION 35
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
/* Limits of integral types. */
#ifndef INT8_MIN
#define UINT32_MAX (4294967295U)
#endif
+#endif /* ! C99 */
+
#endif /* ! FLEXINT_H */
#ifdef __cplusplus
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k.
+ * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
+ * Ditto for the __ia64__ case accordingly.
+ */
+#define YY_BUF_SIZE 32768
+#else
#define YY_BUF_SIZE 16384
+#endif /* __ia64__ */
#endif
/* The state buf must be large enough to hold one state per character in the main buffer.
#define unput(c) yyunput( c, (yytext_ptr) )
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- * Given that the standard has decreed that size_t exists since 1989,
- * I guess we can afford to depend on it. Manoj.
- */
-
#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
typedef size_t yy_size_t;
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
* USA
*/
+#define YY_NO_INPUT 1
static void push_input_file(const char *filename);
static int pop_input_file(void);
-#line 638 "dtc-lexer.lex.c"
+#line 641 "dtc-lexer.lex.c"
#define INITIAL 0
#define INCLUDE 1
static int yy_init_globals (void );
+/* Accessor methods to globals.
+ These are made visible to non-reentrant scanners for convenience. */
+
+int yylex_destroy (void );
+
+int yyget_debug (void );
+
+void yyset_debug (int debug_flag );
+
+YY_EXTRA_TYPE yyget_extra (void );
+
+void yyset_extra (YY_EXTRA_TYPE user_defined );
+
+FILE *yyget_in (void );
+
+void yyset_in (FILE * in_str );
+
+FILE *yyget_out (void );
+
+void yyset_out (FILE * out_str );
+
+int yyget_leng (void );
+
+char *yyget_text (void );
+
+int yyget_lineno (void );
+
+void yyset_lineno (int line_number );
+
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k */
+#define YY_READ_BUF_SIZE 16384
+#else
#define YY_READ_BUF_SIZE 8192
+#endif /* __ia64__ */
#endif
/* Copy whatever the last rule matched to the standard output. */
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO fwrite( yytext, yyleng, 1, yyout )
+#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0)
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
{ \
int c = '*'; \
- int n; \
+ size_t n; \
for ( n = 0; n < max_size && \
(c = getc( yyin )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
#line 64 "dtc-lexer.l"
-#line 795 "dtc-lexer.lex.c"
+#line 832 "dtc-lexer.lex.c"
if ( !(yy_init) )
{
#line 222 "dtc-lexer.l"
ECHO;
YY_BREAK
-#line 1120 "dtc-lexer.lex.c"
+#line 1157 "dtc-lexer.lex.c"
case YY_END_OF_BUFFER:
{
/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
* scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
+ * @param yybytes the byte buffer to scan
+ * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
*
* @return the newly allocated buffer state object.
*/
&phandle, sizeof(phandle));
}
-int _stringlist_contains(const char *strlist, int listlen, const char *str)
+static int _stringlist_contains(const char *strlist, int listlen, const char *str)
{
int len = strlen(str);
const char *p;
fputc('\t', f);
}
-int isstring(char c)
+static int isstring(char c)
{
return (isprint(c)
|| (c == '\0')
-/* ANSI-C code produced by gperf version 3.0.2 */
+/* ANSI-C code produced by gperf version 3.0.3 */
/* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */
#if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \
#line 1 "scripts/genksyms/keywords.gperf"
-#line 3 "scripts/genksyms/keywords.gperf"
+struct resword;
+static const struct resword *is_reserved_word(register const char *str, register unsigned int len);
+#line 5 "scripts/genksyms/keywords.gperf"
struct resword { const char *name; int token; };
/* maximum key range = 62, duplicates = 0 */
#ifdef __GNUC__
__inline
+#ifdef __GNUC_STDC_INLINE__
+__attribute__ ((__gnu_inline__))
+#endif
#endif
const struct resword *
is_reserved_word (register const char *str, register unsigned int len)
static const struct resword wordlist[] =
{
{""}, {""}, {""},
-#line 26 "scripts/genksyms/keywords.gperf"
+#line 28 "scripts/genksyms/keywords.gperf"
{"asm", ASM_KEYW},
{""},
-#line 8 "scripts/genksyms/keywords.gperf"
+#line 10 "scripts/genksyms/keywords.gperf"
{"__asm", ASM_KEYW},
{""},
-#line 9 "scripts/genksyms/keywords.gperf"
+#line 11 "scripts/genksyms/keywords.gperf"
{"__asm__", ASM_KEYW},
{""}, {""},
-#line 52 "scripts/genksyms/keywords.gperf"
+#line 54 "scripts/genksyms/keywords.gperf"
{"__typeof__", TYPEOF_KEYW},
{""},
-#line 12 "scripts/genksyms/keywords.gperf"
+#line 14 "scripts/genksyms/keywords.gperf"
{"__const", CONST_KEYW},
-#line 11 "scripts/genksyms/keywords.gperf"
- {"__attribute__", ATTRIBUTE_KEYW},
#line 13 "scripts/genksyms/keywords.gperf"
+ {"__attribute__", ATTRIBUTE_KEYW},
+#line 15 "scripts/genksyms/keywords.gperf"
{"__const__", CONST_KEYW},
-#line 18 "scripts/genksyms/keywords.gperf"
+#line 20 "scripts/genksyms/keywords.gperf"
{"__signed__", SIGNED_KEYW},
-#line 44 "scripts/genksyms/keywords.gperf"
+#line 46 "scripts/genksyms/keywords.gperf"
{"static", STATIC_KEYW},
-#line 20 "scripts/genksyms/keywords.gperf"
+#line 22 "scripts/genksyms/keywords.gperf"
{"__volatile__", VOLATILE_KEYW},
-#line 39 "scripts/genksyms/keywords.gperf"
+#line 41 "scripts/genksyms/keywords.gperf"
{"int", INT_KEYW},
-#line 32 "scripts/genksyms/keywords.gperf"
+#line 34 "scripts/genksyms/keywords.gperf"
{"char", CHAR_KEYW},
-#line 33 "scripts/genksyms/keywords.gperf"
+#line 35 "scripts/genksyms/keywords.gperf"
{"const", CONST_KEYW},
-#line 45 "scripts/genksyms/keywords.gperf"
+#line 47 "scripts/genksyms/keywords.gperf"
{"struct", STRUCT_KEYW},
-#line 24 "scripts/genksyms/keywords.gperf"
+#line 26 "scripts/genksyms/keywords.gperf"
{"__restrict__", RESTRICT_KEYW},
-#line 25 "scripts/genksyms/keywords.gperf"
+#line 27 "scripts/genksyms/keywords.gperf"
{"restrict", RESTRICT_KEYW},
-#line 23 "scripts/genksyms/keywords.gperf"
+#line 25 "scripts/genksyms/keywords.gperf"
{"_restrict", RESTRICT_KEYW},
-#line 16 "scripts/genksyms/keywords.gperf"
+#line 18 "scripts/genksyms/keywords.gperf"
{"__inline__", INLINE_KEYW},
-#line 10 "scripts/genksyms/keywords.gperf"
+#line 12 "scripts/genksyms/keywords.gperf"
{"__attribute", ATTRIBUTE_KEYW},
{""},
-#line 14 "scripts/genksyms/keywords.gperf"
+#line 16 "scripts/genksyms/keywords.gperf"
{"__extension__", EXTENSION_KEYW},
-#line 35 "scripts/genksyms/keywords.gperf"
+#line 37 "scripts/genksyms/keywords.gperf"
{"enum", ENUM_KEYW},
-#line 19 "scripts/genksyms/keywords.gperf"
+#line 21 "scripts/genksyms/keywords.gperf"
{"__volatile", VOLATILE_KEYW},
-#line 36 "scripts/genksyms/keywords.gperf"
+#line 38 "scripts/genksyms/keywords.gperf"
{"extern", EXTERN_KEYW},
{""},
-#line 17 "scripts/genksyms/keywords.gperf"
+#line 19 "scripts/genksyms/keywords.gperf"
{"__signed", SIGNED_KEYW},
-#line 7 "scripts/genksyms/keywords.gperf"
+#line 9 "scripts/genksyms/keywords.gperf"
{"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW},
{""},
-#line 51 "scripts/genksyms/keywords.gperf"
+#line 53 "scripts/genksyms/keywords.gperf"
{"typeof", TYPEOF_KEYW},
-#line 46 "scripts/genksyms/keywords.gperf"
+#line 48 "scripts/genksyms/keywords.gperf"
{"typedef", TYPEDEF_KEYW},
-#line 15 "scripts/genksyms/keywords.gperf"
+#line 17 "scripts/genksyms/keywords.gperf"
{"__inline", INLINE_KEYW},
-#line 31 "scripts/genksyms/keywords.gperf"
+#line 33 "scripts/genksyms/keywords.gperf"
{"auto", AUTO_KEYW},
-#line 47 "scripts/genksyms/keywords.gperf"
+#line 49 "scripts/genksyms/keywords.gperf"
{"union", UNION_KEYW},
{""}, {""},
-#line 48 "scripts/genksyms/keywords.gperf"
+#line 50 "scripts/genksyms/keywords.gperf"
{"unsigned", UNSIGNED_KEYW},
-#line 49 "scripts/genksyms/keywords.gperf"
+#line 51 "scripts/genksyms/keywords.gperf"
{"void", VOID_KEYW},
-#line 42 "scripts/genksyms/keywords.gperf"
+#line 44 "scripts/genksyms/keywords.gperf"
{"short", SHORT_KEYW},
{""}, {""},
-#line 50 "scripts/genksyms/keywords.gperf"
+#line 52 "scripts/genksyms/keywords.gperf"
{"volatile", VOLATILE_KEYW},
{""},
-#line 37 "scripts/genksyms/keywords.gperf"
+#line 39 "scripts/genksyms/keywords.gperf"
{"float", FLOAT_KEYW},
-#line 34 "scripts/genksyms/keywords.gperf"
+#line 36 "scripts/genksyms/keywords.gperf"
{"double", DOUBLE_KEYW},
{""},
-#line 5 "scripts/genksyms/keywords.gperf"
+#line 7 "scripts/genksyms/keywords.gperf"
{"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW},
{""}, {""},
-#line 38 "scripts/genksyms/keywords.gperf"
+#line 40 "scripts/genksyms/keywords.gperf"
{"inline", INLINE_KEYW},
-#line 6 "scripts/genksyms/keywords.gperf"
+#line 8 "scripts/genksyms/keywords.gperf"
{"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW},
-#line 41 "scripts/genksyms/keywords.gperf"
+#line 43 "scripts/genksyms/keywords.gperf"
{"register", REGISTER_KEYW},
{""},
-#line 22 "scripts/genksyms/keywords.gperf"
+#line 24 "scripts/genksyms/keywords.gperf"
{"_Bool", BOOL_KEYW},
-#line 43 "scripts/genksyms/keywords.gperf"
+#line 45 "scripts/genksyms/keywords.gperf"
{"signed", SIGNED_KEYW},
{""}, {""},
-#line 40 "scripts/genksyms/keywords.gperf"
+#line 42 "scripts/genksyms/keywords.gperf"
{"long", LONG_KEYW}
};
%{
+struct resword;
+static const struct resword *is_reserved_word(register const char *str, register unsigned int len);
%}
struct resword { const char *name; int token; }
%%
# Print selected MAINTAINERS information for
# the files modified in a patch or for a file
#
-# usage: perl scripts/get_maintainer
s.pl [OPTIONS] <patch>
-# perl scripts/get_maintainers.pl [OPTIONS] -f <file>
+# usage: perl scripts/get_maintainer.pl [OPTIONS] <patch>
+# perl scripts/get_maintainer.pl [OPTIONS] -f <file>
#
# Licensed under the terms of the GNU GPL License version 2
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k.
+ * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
+ * Ditto for the __ia64__ case accordingly.
+ */
+#define YY_BUF_SIZE 32768
+#else
#define YY_BUF_SIZE 16384
+#endif /* __ia64__ */
#endif
/* The state buf must be large enough to hold one state per character in the main buffer.
static void zconf_endhelp(void);
static void zconf_endfile(void);
-void new_string(void)
+static void new_string(void)
{
text = malloc(START_STRSIZE);
text_asize = START_STRSIZE;
*text = 0;
}
-void append_string(const char *str, int size)
+static void append_string(const char *str, int size)
{
int new_size = text_size + size + 1;
if (new_size > text_asize) {
text[text_size] = 0;
}
-void alloc_string(const char *str, int size)
+static void alloc_string(const char *str, int size)
{
text = malloc(size + 1);
memcpy(text, str, size);
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
+#ifdef __ia64__
+/* On IA-64, the buffer size is 16k, not 8k */
+#define YY_READ_BUF_SIZE 16384
+#else
#define YY_READ_BUF_SIZE 8192
+#endif /* __ia64__ */
#endif
/* Copy whatever the last rule matched to the standard output. */
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
-#define ECHO fwrite( zconftext, zconfleng, 1, zconfout )
+#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0)
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will
* scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
+ * @param yybytes the byte buffer to scan
+ * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
*
* @return the newly allocated buffer state object.
*/
struct kconf_id;
+static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
+
%%
mainmenu, T_MAINMENU, TF_COMMAND
menu, T_MENU, TF_COMMAND
#endif
struct kconf_id;
+
+static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
/* maximum key range = 47, duplicates = 0 */
#ifdef __GNUC__
static void zconf_endhelp(void);
static void zconf_endfile(void);
-void new_string(void)
+static void new_string(void)
{
text = malloc(START_STRSIZE);
text_asize = START_STRSIZE;
*text = 0;
}
-void append_string(const char *str, int size)
+static void append_string(const char *str, int size)
{
int new_size = text_size + size + 1;
if (new_size > text_asize) {
text[text_size] = 0;
}
-void alloc_string(const char *str, int size)
+static void alloc_string(const char *str, int size)
{
text = malloc(size + 1);
memcpy(text, str, size);
-/* A Bison parser, made by GNU Bison 2.3. */
-/* Skeleton implementation for Bison's Yacc-like parsers in C
+/* A Bison parser, made by GNU Bison 2.4.1. */
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
+
+ This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
+
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* As a special exception, you may create a larger work that contains
part or all of the Bison parser skeleton and distribute that work
special exception, which will cause the skeleton and the resulting
Bison output files to be licensed under the GNU General Public
License without this special exception.
-
+
This special exception was added by the Free Software Foundation in
version 2.2 of Bison. */
#define YYBISON 1
/* Bison version. */
-#define YYBISON_VERSION "2.3"
+#define YYBISON_VERSION "2.4.1"
/* Skeleton name. */
#define YYSKELETON_NAME "yacc.c"
/* Pure parsers. */
#define YYPURE 0
+/* Push parsers. */
+#define YYPUSH 0
+
+/* Pull parsers. */
+#define YYPULL 1
+
/* Using locations. */
#define YYLSP_NEEDED 0
/* Substitute the variable and function names. */
-#define yyparse zconfparse
-#define yylex zconflex
-#define yyerror zconferror
-#define yylval zconflval
-#define yychar zconfchar
-#define yydebug zconfdebug
-#define yynerrs zconfnerrs
-
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- T_MAINMENU = 258,
- T_MENU = 259,
- T_ENDMENU = 260,
- T_SOURCE = 261,
- T_CHOICE = 262,
- T_ENDCHOICE = 263,
- T_COMMENT = 264,
- T_CONFIG = 265,
- T_MENUCONFIG = 266,
- T_HELP = 267,
- T_HELPTEXT = 268,
- T_IF = 269,
- T_ENDIF = 270,
- T_DEPENDS = 271,
- T_OPTIONAL = 272,
- T_PROMPT = 273,
- T_TYPE = 274,
- T_DEFAULT = 275,
- T_SELECT = 276,
- T_RANGE = 277,
- T_OPTION = 278,
- T_ON = 279,
- T_WORD = 280,
- T_WORD_QUOTE = 281,
- T_UNEQUAL = 282,
- T_CLOSE_PAREN = 283,
- T_OPEN_PAREN = 284,
- T_EOL = 285,
- T_OR = 286,
- T_AND = 287,
- T_EQUAL = 288,
- T_NOT = 289
- };
-#endif
-/* Tokens. */
-#define T_MAINMENU 258
-#define T_MENU 259
-#define T_ENDMENU 260
-#define T_SOURCE 261
-#define T_CHOICE 262
-#define T_ENDCHOICE 263
-#define T_COMMENT 264
-#define T_CONFIG 265
-#define T_MENUCONFIG 266
-#define T_HELP 267
-#define T_HELPTEXT 268
-#define T_IF 269
-#define T_ENDIF 270
-#define T_DEPENDS 271
-#define T_OPTIONAL 272
-#define T_PROMPT 273
-#define T_TYPE 274
-#define T_DEFAULT 275
-#define T_SELECT 276
-#define T_RANGE 277
-#define T_OPTION 278
-#define T_ON 279
-#define T_WORD 280
-#define T_WORD_QUOTE 281
-#define T_UNEQUAL 282
-#define T_CLOSE_PAREN 283
-#define T_OPEN_PAREN 284
-#define T_EOL 285
-#define T_OR 286
-#define T_AND 287
-#define T_EQUAL 288
-#define T_NOT 289
-
-
+#define yyparse zconfparse
+#define yylex zconflex
+#define yyerror zconferror
+#define yylval zconflval
+#define yychar zconfchar
+#define yydebug zconfdebug
+#define yynerrs zconfnerrs
/* Copy the first part of user declarations. */
#define LKC_DIRECT_LINK
#include "lkc.h"
-#include "zconf.hash.c"
-
#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
#define PRINTD 0x0001
#endif
+
/* Enabling traces. */
#ifndef YYDEBUG
# define YYDEBUG 0
# define YYTOKEN_TABLE 0
#endif
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ T_MAINMENU = 258,
+ T_MENU = 259,
+ T_ENDMENU = 260,
+ T_SOURCE = 261,
+ T_CHOICE = 262,
+ T_ENDCHOICE = 263,
+ T_COMMENT = 264,
+ T_CONFIG = 265,
+ T_MENUCONFIG = 266,
+ T_HELP = 267,
+ T_HELPTEXT = 268,
+ T_IF = 269,
+ T_ENDIF = 270,
+ T_DEPENDS = 271,
+ T_OPTIONAL = 272,
+ T_PROMPT = 273,
+ T_TYPE = 274,
+ T_DEFAULT = 275,
+ T_SELECT = 276,
+ T_RANGE = 277,
+ T_OPTION = 278,
+ T_ON = 279,
+ T_WORD = 280,
+ T_WORD_QUOTE = 281,
+ T_UNEQUAL = 282,
+ T_CLOSE_PAREN = 283,
+ T_OPEN_PAREN = 284,
+ T_EOL = 285,
+ T_OR = 286,
+ T_AND = 287,
+ T_EQUAL = 288,
+ T_NOT = 289
+ };
+#endif
+
+
+
#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
typedef union YYSTYPE
-
{
+
+
char *string;
struct file *file;
struct symbol *symbol;
struct expr *expr;
struct menu *menu;
struct kconf_id *id;
-}
-/* Line 187 of yacc.c. */
- YYSTYPE;
+
+
+} YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
# define yystype YYSTYPE /* obsolescent; will be withdrawn */
# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
#endif
-
/* Copy the second part of user declarations. */
-/* Line 216 of yacc.c. */
+/* Include zconf.hash.c here so it can see the token constants. */
+#include "zconf.hash.c"
+
#ifdef short
#if (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
static int
-YYID (int i)
+YYID (int yyi)
#else
static int
-YYID (i)
- int i;
+YYID (yyi)
+ int yyi;
#endif
{
- return i;
+ return yyi;
}
#endif
/* A type that is properly aligned for any stack member. */
union yyalloc
{
- yytype_int16 yyss;
- YYSTYPE yyvs;
- };
+ yytype_int16 yyss_alloc;
+ YYSTYPE yyvs_alloc;
+};
/* The size of the maximum gap between one aligned stack and the next. */
# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
elements in the stack, and YYPTR gives the new location of the
stack. Advance YYPTR to a properly aligned location for the next
stack. */
-# define YYSTACK_RELOCATE(Stack) \
+# define YYSTACK_RELOCATE(Stack_alloc, Stack) \
do \
{ \
YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack, Stack, yysize); \
- Stack = &yyptr->Stack; \
+ YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \
+ Stack = &yyptr->Stack_alloc; \
yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
yyptr += yynewbytes / sizeof (*yyptr); \
} \
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 104, 104, 106, 108, 109, 110, 111, 112, 113,
- 114, 118, 122, 122, 122, 122, 122, 122, 122, 126,
- 127, 128, 129, 130, 131, 135, 136, 142, 150, 156,
- 164, 174, 176, 177, 178, 179, 180, 181, 184, 192,
- 198, 208, 214, 220, 223, 225, 236, 237, 242, 251,
- 256, 264, 267, 269, 270, 271, 272, 273, 276, 282,
- 293, 299, 309, 311, 316, 324, 332, 335, 337, 338,
- 339, 344, 351, 356, 364, 367, 369, 370, 371, 374,
- 382, 389, 396, 402, 409, 411, 412, 413, 416, 424,
- 426, 431, 432, 435, 436, 437, 441, 442, 445, 446,
- 449, 450, 451, 452, 453, 454, 455, 458, 459, 462,
- 463
+ 0, 107, 107, 109, 111, 112, 113, 114, 115, 116,
+ 117, 121, 125, 125, 125, 125, 125, 125, 125, 129,
+ 130, 131, 132, 133, 134, 138, 139, 145, 153, 159,
+ 167, 177, 179, 180, 181, 182, 183, 184, 187, 195,
+ 201, 211, 217, 223, 226, 228, 239, 240, 245, 254,
+ 259, 267, 270, 272, 273, 274, 275, 276, 279, 285,
+ 296, 302, 312, 314, 319, 327, 335, 338, 340, 341,
+ 342, 347, 354, 359, 367, 370, 372, 373, 374, 377,
+ 385, 392, 399, 405, 412, 414, 415, 416, 419, 427,
+ 429, 434, 435, 438, 439, 440, 444, 445, 448, 449,
+ 452, 453, 454, 455, 456, 457, 458, 461, 462, 465,
+ 466
};
#endif
#if (defined __STDC__ || defined __C99__FUNC__ \
|| defined __cplusplus || defined _MSC_VER)
static void
-yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
#else
static void
-yy_stack_print (bottom, top)
- yytype_int16 *bottom;
- yytype_int16 *top;
+yy_stack_print (yybottom, yytop)
+ yytype_int16 *yybottom;
+ yytype_int16 *yytop;
#endif
{
YYFPRINTF (stderr, "Stack now");
- for (; bottom <= top; ++bottom)
- YYFPRINTF (stderr, " %d", *bottom);
+ for (; yybottom <= yytop; yybottom++)
+ {
+ int yybot = *yybottom;
+ YYFPRINTF (stderr, " %d", yybot);
+ }
YYFPRINTF (stderr, "\n");
}
/* The symbols being reduced. */
for (yyi = 0; yyi < yynrhs; yyi++)
{
- fprintf (stderr, " $%d = ", yyi + 1);
+ YYFPRINTF (stderr, " $%d = ", yyi + 1);
yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
&(yyvsp[(yyi + 1) - (yynrhs)])
);
- fprintf (stderr, "\n");
+ YYFPRINTF (stderr, "\n");
}
}
break;
}
}
-\f
/* Prevent warnings from -Wmissing-prototypes. */
-
#ifdef YYPARSE_PARAM
#if defined __STDC__ || defined __cplusplus
int yyparse (void *YYPARSE_PARAM);
#endif /* ! YYPARSE_PARAM */
-
-/* The look-ahead symbol. */
+/* The lookahead symbol. */
int yychar;
-/* The semantic value of the look-ahead symbol. */
+/* The semantic value of the lookahead symbol. */
YYSTYPE yylval;
/* Number of syntax errors so far. */
-/*----------.
-| yyparse. |
-`----------*/
+/*-------------------------.
+| yyparse or yypush_parse. |
+`-------------------------*/
#ifdef YYPARSE_PARAM
#if (defined __STDC__ || defined __C99__FUNC__ \
#endif
#endif
{
-
- int yystate;
- int yyn;
- int yyresult;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
- /* Look-ahead token as an internal (translated) token number. */
- int yytoken = 0;
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
- /* Three stacks and their tools:
- `yyss': related to states,
- `yyvs': related to semantic values,
- `yyls': related to locations.
- Refer to the stacks thru separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss = yyssa;
- yytype_int16 *yyssp;
+ int yystate;
+ /* Number of tokens to shift before error messages enabled. */
+ int yyerrstatus;
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs = yyvsa;
- YYSTYPE *yyvsp;
+ /* The stacks and their tools:
+ `yyss': related to states.
+ `yyvs': related to semantic values.
+ Refer to the stacks thru separate pointers, to allow yyoverflow
+ to reallocate them elsewhere. */
+ /* The state stack. */
+ yytype_int16 yyssa[YYINITDEPTH];
+ yytype_int16 *yyss;
+ yytype_int16 *yyssp;
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
+ /* The semantic value stack. */
+ YYSTYPE yyvsa[YYINITDEPTH];
+ YYSTYPE *yyvs;
+ YYSTYPE *yyvsp;
- YYSIZE_T yystacksize = YYINITDEPTH;
+ YYSIZE_T yystacksize;
+ int yyn;
+ int yyresult;
+ /* Lookahead token as an internal (translated) token number. */
+ int yytoken;
/* The variables used to return semantic value and location from the
action routines. */
YYSTYPE yyval;
+#if YYERROR_VERBOSE
+ /* Buffer for error messages, and its allocated size. */
+ char yymsgbuf[128];
+ char *yymsg = yymsgbuf;
+ YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N))
/* The number of symbols on the RHS of the reduced rule.
Keep to zero when no symbol should be popped. */
int yylen = 0;
+ yytoken = 0;
+ yyss = yyssa;
+ yyvs = yyvsa;
+ yystacksize = YYINITDEPTH;
+
YYDPRINTF ((stderr, "Starting parse\n"));
yystate = 0;
yyerrstatus = 0;
yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
+ yychar = YYEMPTY; /* Cause a token to be read. */
/* Initialize stack pointers.
Waste one element of value and location stack
so that they stay on the same level as the state stack.
The wasted elements are never initialized. */
-
yyssp = yyss;
yyvsp = yyvs;
YYSTYPE *yyvs1 = yyvs;
yytype_int16 *yyss1 = yyss;
-
/* Each stack pointer address is followed by the size of the
data in use in that stack, in bytes. This used to be a
conditional around just the two extra args, but that might
yyoverflow (YY_("memory exhausted"),
&yyss1, yysize * sizeof (*yyssp),
&yyvs1, yysize * sizeof (*yyvsp),
-
&yystacksize);
yyss = yyss1;
(union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
if (! yyptr)
goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss);
- YYSTACK_RELOCATE (yyvs);
-
+ YYSTACK_RELOCATE (yyss_alloc, yyss);
+ YYSTACK_RELOCATE (yyvs_alloc, yyvs);
# undef YYSTACK_RELOCATE
if (yyss1 != yyssa)
YYSTACK_FREE (yyss1);
yyssp = yyss + yysize - 1;
yyvsp = yyvs + yysize - 1;
-
YYDPRINTF ((stderr, "Stack size increased to %lu\n",
(unsigned long int) yystacksize));
YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+ if (yystate == YYFINAL)
+ YYACCEPT;
+
goto yybackup;
/*-----------.
yybackup:
/* Do appropriate processing given the current state. Read a
- look-ahead token if we need one and don't already have one. */
+ lookahead token if we need one and don't already have one. */
- /* First try to decide what to do without reference to look-ahead token. */
+ /* First try to decide what to do without reference to lookahead token. */
yyn = yypact[yystate];
if (yyn == YYPACT_NINF)
goto yydefault;
- /* Not known => get a look-ahead token if don't already have one. */
+ /* Not known => get a lookahead token if don't already have one. */
- /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
+ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
if (yychar == YYEMPTY)
{
YYDPRINTF ((stderr, "Reading a token: "));
goto yyreduce;
}
- if (yyn == YYFINAL)
- YYACCEPT;
-
/* Count tokens shifted since error; after three, turn off error
status. */
if (yyerrstatus)
yyerrstatus--;
- /* Shift the look-ahead token. */
+ /* Shift the lookahead token. */
YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
- /* Discard the shifted token unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
+ /* Discard the shifted token. */
+ yychar = YYEMPTY;
yystate = yyn;
*++yyvsp = yylval;
break;
-/* Line 1267 of yacc.c. */
default: break;
}
*++yyvsp = yyval;
-
/* Now `shift' the result of the reduction. Determine what state
that goes to, based on the state we popped back to and the rule
number reduced by. */
if (yyerrstatus == 3)
{
- /* If just tried and failed to reuse look-ahead token after an
+ /* If just tried and failed to reuse lookahead token after an
error, discard it. */
if (yychar <= YYEOF)
}
}
- /* Else will try to reuse look-ahead token after shifting the error
+ /* Else will try to reuse lookahead token after shifting the error
token. */
goto yyerrlab1;
YY_STACK_PRINT (yyss, yyssp);
}
- if (yyn == YYFINAL)
- YYACCEPT;
-
*++yyvsp = yylval;
yyresult = 1;
goto yyreturn;
-#ifndef yyoverflow
+#if !defined(yyoverflow) || YYERROR_VERBOSE
/*-------------------------------------------------.
| yyexhaustedlab -- memory exhaustion comes here. |
`-------------------------------------------------*/
#endif
yyreturn:
- if (yychar != YYEOF && yychar != YYEMPTY)
+ if (yychar != YYEMPTY)
yydestruct ("Cleanup: discarding lookahead",
yytoken, &yylval);
/* Do not reclaim the symbols of the rule which action triggered
sym_set_change_count(1);
}
-const char *zconf_tokenname(int token)
+static const char *zconf_tokenname(int token)
{
switch (token) {
case T_MENU: return "menu";
#endif
}
-void print_quoted_string(FILE *out, const char *str)
+static void print_quoted_string(FILE *out, const char *str)
{
const char *p;
int len;
putc('"', out);
}
-void print_symbol(FILE *out, struct menu *menu)
+static void print_symbol(FILE *out, struct menu *menu)
{
struct symbol *sym = menu->sym;
struct property *prop;
#define LKC_DIRECT_LINK
#include "lkc.h"
-#include "zconf.hash.c"
-
#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt)
#define PRINTD 0x0001
menu_end_menu();
} if_entry menu_entry choice_entry
+%{
+/* Include zconf.hash.c here so it can see the token constants. */
+#include "zconf.hash.c"
+%}
+
%%
input: stmt_list;
sym_set_change_count(1);
}
-const char *zconf_tokenname(int token)
+static const char *zconf_tokenname(int token)
{
switch (token) {
case T_MENU: return "menu";
#endif
}
-void print_quoted_string(FILE *out, const char *str)
+static void print_quoted_string(FILE *out, const char *str)
{
const char *p;
int len;
putc('"', out);
}
-void print_symbol(FILE *out, struct menu *menu)
+static void print_symbol(FILE *out, struct menu *menu)
{
struct symbol *sym = menu->sym;
struct property *prop;
if (!ima_initialized)
return iint;
- iint = kmem_cache_alloc(iint_cache, GFP_KERNEL);
+ iint = kmem_cache_alloc(iint_cache, GFP_NOFS);
if (!iint)
return iint;
- rc = radix_tree_preload(GFP_KERNEL);
+ rc = radix_tree_preload(GFP_NOFS);
if (rc < 0)
goto out;
list_for_each_entry(substream, &s->substreams, list) {
if (substream->opened) {
if (stream == SNDRV_RAWMIDI_STREAM_INPUT ||
- !(mode & SNDRV_RAWMIDI_LFLG_APPEND))
+ !(mode & SNDRV_RAWMIDI_LFLG_APPEND) ||
+ !substream->append)
continue;
}
if (subdevice < 0 || subdevice == substream->number) {
{
int err;
- err = snd_rawmidi_runtime_create(substream);
- if (err < 0)
- return err;
- err = substream->ops->open(substream);
- if (err < 0)
- return err;
- substream->opened = 1;
- if (substream->use_count++ == 0)
+ if (substream->use_count == 0) {
+ err = snd_rawmidi_runtime_create(substream);
+ if (err < 0)
+ return err;
+ err = substream->ops->open(substream);
+ if (err < 0) {
+ snd_rawmidi_runtime_free(substream);
+ return err;
+ }
+ substream->opened = 1;
substream->active_sensing = 0;
- if (mode & SNDRV_RAWMIDI_LFLG_APPEND)
- substream->append = 1;
+ if (mode & SNDRV_RAWMIDI_LFLG_APPEND)
+ substream->append = 1;
+ }
+ substream->use_count++;
rmidi->streams[substream->stream].substream_opened++;
return 0;
}
SNDRV_RAWMIDI_STREAM_INPUT,
mode, &sinput);
if (err < 0)
- goto __error;
+ return err;
}
if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) {
err = assign_substream(rmidi, subdevice,
SNDRV_RAWMIDI_STREAM_OUTPUT,
mode, &soutput);
if (err < 0)
- goto __error;
+ return err;
}
if (sinput) {
err = open_substream(rmidi, sinput, mode);
if (err < 0)
- goto __error;
+ return err;
}
if (soutput) {
err = open_substream(rmidi, soutput, mode);
if (err < 0) {
if (sinput)
close_substream(rmidi, sinput, 0);
- goto __error;
+ return err;
}
}
rfile->input = sinput;
rfile->output = soutput;
return 0;
-
- __error:
- if (sinput && sinput->runtime)
- snd_rawmidi_runtime_free(sinput);
- if (soutput && soutput->runtime)
- snd_rawmidi_runtime_free(soutput);
- return err;
}
/* called from sound/core/seq/seq_midi.c */
* Mid level stuff
*/
-struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED };
+struct sound_settings dmasound = {
+ .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock)
+};
static inline void sound_silence(void)
{
#define MAX_SIZE (256*1024)
unsigned char buf[MAX_SIZE];
-int loadhex(FILE *inf, unsigned char *buf)
+static int loadhex(FILE *inf, unsigned char *buf)
{
int l=0, c, i;
break;
default:
- /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
+ /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
;
}
}
break;
default:
- /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
+ /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
;
}
}
break;
default:;
- /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */
+ /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */
}
}
chip->last_cmd[addr]);
chip->single_cmd = 1;
bus->response_reset = 0;
- /* re-initialize CORB/RIRB */
+ /* release CORB/RIRB */
azx_free_cmd_io(chip);
- azx_init_cmd_io(chip);
+ /* disable unsolicited responses */
+ azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL);
return -1;
}
}
/* Accept unsolicited responses */
- azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL);
+ if (!chip->single_cmd)
+ azx_writel(chip, GCTL, azx_readl(chip, GCTL) |
+ ICH6_GCTL_UNSOL);
/* detect codecs */
if (!chip->codec_mask) {
azx_int_enable(chip);
/* initialize the codec command I/O */
- azx_init_cmd_io(chip);
+ if (!chip->single_cmd)
+ azx_init_cmd_io(chip);
/* program the position buffer */
azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
unsigned int dell_automute;
unsigned int port_d_mode;
+ unsigned char ext_mic_bias;
};
static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo,
static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 };
#define CXT5066_SPDIF_OUT 0x21
+/* OLPC's microphone port is DC coupled for use with external sensors,
+ * therefore we use a 50% mic bias in order to center the input signal with
+ * the DC input range of the codec. */
+#define CXT5066_OLPC_EXT_MIC_BIAS PIN_VREF50
+
static struct hda_channel_mode cxt5066_modes[1] = {
{ 2, NULL },
};
/* toggle input of built-in and mic jack appropriately */
static void cxt5066_automic(struct hda_codec *codec)
{
- static struct hda_verb ext_mic_present[] = {
+ struct conexant_spec *spec = codec->spec;
+ struct hda_verb ext_mic_present[] = {
/* enable external mic, port B */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias},
/* switch to external mic input */
{0x17, AC_VERB_SET_CONNECT_SEL, 0},
{0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */
/* Port B: external microphone */
- {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS},
/* Port C: internal microphone */
{0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
CXT5066_LAPTOP),
SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
CXT5066_DELL_LAPTOP),
+ SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
{}
};
spec->input_mux = &cxt5066_capture_source;
spec->port_d_mode = PIN_HP;
+ spec->ext_mic_bias = PIN_VREF80;
spec->num_init_verbs = 1;
spec->init_verbs[0] = cxt5066_init_verbs;
spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc;
spec->mixers[spec->num_mixers++] = cxt5066_mixers;
spec->port_d_mode = 0;
+ spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS;
/* no S/PDIF out */
spec->multiout.dig_out_nid = 0;
static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
+ { .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch },
{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch },
MODULE_ALIAS("snd-hda-codec-id:10de0002");
MODULE_ALIAS("snd-hda-codec-id:10de0003");
+MODULE_ALIAS("snd-hda-codec-id:10de0005");
MODULE_ALIAS("snd-hda-codec-id:10de0006");
MODULE_ALIAS("snd-hda-codec-id:10de0007");
MODULE_ALIAS("snd-hda-codec-id:10de0067");
spec->multiout.dig_out_nid = dig_nid;
else {
spec->multiout.slave_dig_outs = spec->slave_dig_outs;
- spec->slave_dig_outs[i - 1] = dig_nid;
- if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
break;
+ spec->slave_dig_outs[i - 1] = dig_nid;
}
}
if (spec->autocfg.dig_in_pin)
SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
- SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013),
+ SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */
SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013),
SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
- /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently
- * no perfect solution yet
+ /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
+ * so apparently no perfect solution yet
*/
SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5),
+ SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5),
{} /* terminator */
};
spec->multiout.dig_out_nid = dig_nid;
else {
spec->multiout.slave_dig_outs = spec->slave_dig_outs;
- spec->slave_dig_outs[i - 1] = dig_nid;
- if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1)
+ if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1)
break;
+ spec->slave_dig_outs[i - 1] = dig_nid;
}
}
if (spec->autocfg.dig_in_pin)
SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */
SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06),
+ SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO),
+ SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO),
SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO",
ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pci.h>
+#include <linux/dmi.h>
#include <sound/core.h>
#include <sound/asoundef.h>
#include <sound/jack.h>
"Dell Studio 17", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
"Dell Studio 1555", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd,
+ "Dell Studio 1557", STAC_DELL_M6_DMIC),
{} /* terminator */
};
"DFI LanParty", STAC_92HD71BXX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb,
"HP dv4-1222nr", STAC_HP_DV4_1222NR),
+ SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720,
+ "HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080,
"HP", STAC_HP_DV5),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0,
}
}
+static int hp_bseries_system(u32 subsystem_id)
+{
+ switch (subsystem_id) {
+ case 0x103c307e:
+ case 0x103c307f:
+ case 0x103c3080:
+ case 0x103c3081:
+ case 0x103c1722:
+ case 0x103c1723:
+ case 0x103c1724:
+ case 0x103c1725:
+ case 0x103c1726:
+ case 0x103c1727:
+ case 0x103c1728:
+ case 0x103c1729:
+ return 1;
+ }
+ return 0;
+}
+
#ifdef CONFIG_PROC_FS
static void stac92hd_proc_hook(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
else
spec->gpio_data |= spec->gpio_led; /* white */
+ if (hp_bseries_system(codec->subsystem_id)) {
+ /* LED state is inverted on these systems */
+ spec->gpio_data ^= spec->gpio_led;
+ }
+
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir,
spec->gpio_data);
{
struct sigmatel_spec *spec;
struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init;
+ unsigned int pin_cfg;
int err = 0;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
break;
}
+ if (hp_bseries_system(codec->subsystem_id)) {
+ pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f);
+ if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT ||
+ get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER ||
+ get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) {
+ /* It was changed in the BIOS to just satisfy MS DTM.
+ * Lets turn it back into slaved HP
+ */
+ pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE))
+ | (AC_JACK_HP_OUT <<
+ AC_DEFCFG_DEVICE_SHIFT);
+ pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC
+ | AC_DEFCFG_SEQUENCE)))
+ | 0x1f;
+ snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg);
+ }
+ }
+
+ if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) {
+ const struct dmi_device *dev = NULL;
+ while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING,
+ NULL, dev))) {
+ if (strcmp(dev->name, "HP_Mute_LED_1")) {
+ switch (codec->vendor_id) {
+ case 0x111d7608:
+ spec->gpio_led = 0x01;
+ break;
+ case 0x111d7600:
+ case 0x111d7601:
+ case 0x111d7602:
+ case 0x111d7603:
+ spec->gpio_led = 0x08;
+ break;
+ }
+ break;
+ }
+ }
+ }
+
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (spec->gpio_led) {
spec->gpio_mask |= spec->gpio_led;
#ifdef CONFIG_PM
int (*pm_suspend)(struct snd_ice1712 *);
int (*pm_resume)(struct snd_ice1712 *);
- int pm_suspend_enabled:1;
- int pm_saved_is_spdif_master:1;
+ unsigned int pm_suspend_enabled:1;
+ unsigned int pm_saved_is_spdif_master:1;
unsigned int pm_saved_spdif_ctrl;
unsigned char pm_saved_spdif_cfg;
unsigned int pm_saved_route;
}
#ifdef CONFIG_PM
-static int __devinit prodigy_hd2_resume(struct snd_ice1712 *ice)
+static int prodigy_hd2_resume(struct snd_ice1712 *ice)
{
/* initialize ak4396 codec and restore previous mixer volumes */
struct prodigy_hifi_spec *spec = ice->spec;
.name = "HP xw4200", /* AD1981B*/
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x104d,
+ .subdevice = 0x8144,
+ .name = "Sony",
+ .type = AC97_TUNE_INV_EAPD
+ },
{
.subvendor = 0x104d,
.subdevice = 0x8197,
MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Yamaha/SEGA, AICA}}");
+MODULE_FIRMWARE("aica_firmware.bin");
/* module parameters */
#define CARD_NAME "AICA"
#define UPPER_GROUP ((1<<8) | (1<<9) | (1<<10) | (1<<11) | (1<<15))
static const unsigned short sr_valid_mask[] = {
LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 0*/
- LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/
LOWER_GROUP, /* Usb, bosr - 0*/
+ LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/
UPPER_GROUP, /* Usb, bosr - 1*/
};
/*
else
omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ);
- omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
- omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
+ if (!(cpu_class_is_omap1())) {
+ omap_set_dma_src_burst_mode(prtd->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ omap_set_dma_dest_burst_mode(prtd->dma_ch,
+ OMAP_DMA_DATA_BURST_16);
+ }
return 0;
}
MODULE_AUTHOR("Anuj Aggarwal <anuj.aggarwal@ti.com>");
MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
* |P| <--- TWL4030 <--------- Line In and MICs
*/
static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = {
- SND_SOC_DAPM_DAC("PCM DAC", "Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_DAC("PCM DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_PGA_E("Headphone Amplifier", SND_SOC_NOPM,
0, 0, NULL, 0, omap3pandora_hp_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
snd_soc_dapm_nc_pin(codec, "CARKITR");
snd_soc_dapm_nc_pin(codec, "HFL");
snd_soc_dapm_nc_pin(codec, "HFR");
+ snd_soc_dapm_nc_pin(codec, "VIBRA");
ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets,
ARRAY_SIZE(omap3pandora_out_dapm_widgets));
goto err;
}
+ clk_enable(i2s->iis_cclk);
+
ret = s3c_i2sv2_probe(pdev, dai, i2s, 0);
if (ret)
goto err_clk;
/*
*/
-#define combine_word(s) ((*s) | ((unsigned int)(s)[1] << 8))
+#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8))
#define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16))
#define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24))
channels = (ftr[0] - 7) / csize - 1;
master_bits = snd_usb_combine_bytes(ftr + 6, csize);
+ /* master configuration quirks */
+ switch (state->chip->usb_id) {
+ case USB_ID(0x08bb, 0x2702):
+ snd_printk(KERN_INFO
+ "usbmixer: master volume quirk for PCM2702 chip\n");
+ /* disable non-functional volume control */
+ master_bits &= ~(1 << (USB_FEATURE_VOLUME - 1));
+ break;
+ }
if (channels > 0)
first_ch_bits = snd_usb_combine_bytes(ftr + 6 + csize, csize);
else
if (fd[nr_cpu][counter] < 0) {
int err = errno;
- if (err == EPERM)
+ if (err == EPERM || err == EACCES)
die("Permission error - are you root?\n");
else if (err == ENODEV && profile_cpu != -1)
die("No such device - did you specify an out-of-range profile CPU?\n");
if (fd[i][counter] < 0) {
int err = errno;
- if (err == EPERM)
+ if (err == EPERM || err == EACCES)
die("No permission - are you root?\n");
/*
* If it's cycles then fall back to hrtimer
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
+#include <asm-generic/bitops/le.h>
#ifdef KVM_COALESCED_MMIO_PAGE_OFFSET
#include "coalesced_mmio.h"
unsigned long rel_gfn = gfn - memslot->base_gfn;
/* avoid RMW */
- if (!test_bit(rel_gfn, memslot->dirty_bitmap))
- set_bit(rel_gfn, memslot->dirty_bitmap);
+ if (!generic_test_le_bit(rel_gfn, memslot->dirty_bitmap))
+ generic___set_le_bit(rel_gfn, memslot->dirty_bitmap);
}
}
projects / linux-2.6-block.git / commitdiff