x86: merge native_smp_prepare_cpus
authorGlauber de Oliveira Costa <gcosta@redhat.com>
Wed, 19 Mar 2008 17:26:11 +0000 (14:26 -0300)
committerIngo Molnar <mingo@elte.hu>
Thu, 17 Apr 2008 15:41:04 +0000 (17:41 +0200)
With the previous changes, code for native_smp_prepare_cpus()
in i386 and x86_64 now look very similar. merge them into
smpboot.c. Minor differences are inside ifdef

Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/smpboot.c
arch/x86/kernel/smpboot_32.c
arch/x86/kernel/smpboot_64.c

index 26118b4a1c38cdfcabfb2714fbc90e4914a245b5..45119d39f31e79e99e5e9f6789e24494dc63c630 100644 (file)
@@ -7,6 +7,7 @@
 #include <linux/err.h>
 #include <linux/nmi.h>
 
+#include <asm/acpi.h>
 #include <asm/desc.h>
 #include <asm/nmi.h>
 #include <asm/irq.h>
@@ -75,6 +76,8 @@ EXPORT_PER_CPU_SYMBOL(cpu_info);
 
 static atomic_t init_deasserted;
 
+static int boot_cpu_logical_apicid;
+
 /* ready for x86_64, no harm for x86, since it will overwrite after alloc */
 unsigned char *trampoline_base = __va(SMP_TRAMPOLINE_BASE);
 
@@ -1001,6 +1004,173 @@ int __cpuinit native_cpu_up(unsigned int cpu)
        return 0;
 }
 
+/*
+ * Fall back to non SMP mode after errors.
+ *
+ * RED-PEN audit/test this more. I bet there is more state messed up here.
+ */
+static __init void disable_smp(void)
+{
+       cpu_present_map = cpumask_of_cpu(0);
+       cpu_possible_map = cpumask_of_cpu(0);
+#ifdef CONFIG_X86_32
+       smpboot_clear_io_apic_irqs();
+#endif
+       if (smp_found_config)
+               phys_cpu_present_map =
+                               physid_mask_of_physid(boot_cpu_physical_apicid);
+       else
+               phys_cpu_present_map = physid_mask_of_physid(0);
+       map_cpu_to_logical_apicid();
+       cpu_set(0, per_cpu(cpu_sibling_map, 0));
+       cpu_set(0, per_cpu(cpu_core_map, 0));
+}
+
+/*
+ * Various sanity checks.
+ */
+static int __init smp_sanity_check(unsigned max_cpus)
+{
+       if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
+               printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
+                                   "by the BIOS.\n", hard_smp_processor_id());
+               physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+       }
+
+       /*
+        * If we couldn't find an SMP configuration at boot time,
+        * get out of here now!
+        */
+       if (!smp_found_config && !acpi_lapic) {
+               printk(KERN_NOTICE "SMP motherboard not detected.\n");
+               disable_smp();
+               if (APIC_init_uniprocessor())
+                       printk(KERN_NOTICE "Local APIC not detected."
+                                          " Using dummy APIC emulation.\n");
+               return -1;
+       }
+
+       /*
+        * Should not be necessary because the MP table should list the boot
+        * CPU too, but we do it for the sake of robustness anyway.
+        */
+       if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
+               printk(KERN_NOTICE
+                       "weird, boot CPU (#%d) not listed by the BIOS.\n",
+                       boot_cpu_physical_apicid);
+               physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+       }
+
+       /*
+        * If we couldn't find a local APIC, then get out of here now!
+        */
+       if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+           !cpu_has_apic) {
+               printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
+                       boot_cpu_physical_apicid);
+               printk(KERN_ERR "... forcing use of dummy APIC emulation."
+                               "(tell your hw vendor)\n");
+               smpboot_clear_io_apic();
+               return -1;
+       }
+
+       verify_local_APIC();
+
+       /*
+        * If SMP should be disabled, then really disable it!
+        */
+       if (!max_cpus) {
+               printk(KERN_INFO "SMP mode deactivated,"
+                                "forcing use of dummy APIC emulation.\n");
+               smpboot_clear_io_apic();
+#ifdef CONFIG_X86_32
+               if (nmi_watchdog == NMI_LOCAL_APIC) {
+                       printk(KERN_INFO "activating minimal APIC for"
+                                        "NMI watchdog use.\n");
+                       connect_bsp_APIC();
+                       setup_local_APIC();
+                       end_local_APIC_setup();
+               }
+#endif
+               return -1;
+       }
+
+       return 0;
+}
+
+static void __init smp_cpu_index_default(void)
+{
+       int i;
+       struct cpuinfo_x86 *c;
+
+       for_each_cpu_mask(i, cpu_possible_map) {
+               c = &cpu_data(i);
+               /* mark all to hotplug */
+               c->cpu_index = NR_CPUS;
+       }
+}
+
+/*
+ * Prepare for SMP bootup.  The MP table or ACPI has been read
+ * earlier.  Just do some sanity checking here and enable APIC mode.
+ */
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
+{
+       nmi_watchdog_default();
+       smp_cpu_index_default();
+       current_cpu_data = boot_cpu_data;
+       cpu_callin_map = cpumask_of_cpu(0);
+       mb();
+       /*
+        * Setup boot CPU information
+        */
+       smp_store_cpu_info(0); /* Final full version of the data */
+       boot_cpu_logical_apicid = logical_smp_processor_id();
+       current_thread_info()->cpu = 0;  /* needed? */
+       set_cpu_sibling_map(0);
+
+       if (smp_sanity_check(max_cpus) < 0) {
+               printk(KERN_INFO "SMP disabled\n");
+               disable_smp();
+               return;
+       }
+
+       if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
+               panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
+                    GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
+               /* Or can we switch back to PIC here? */
+       }
+
+#ifdef CONFIG_X86_32
+       connect_bsp_APIC();
+#endif
+       /*
+        * Switch from PIC to APIC mode.
+        */
+       setup_local_APIC();
+
+#ifdef CONFIG_X86_64
+       /*
+        * Enable IO APIC before setting up error vector
+        */
+       if (!skip_ioapic_setup && nr_ioapics)
+               enable_IO_APIC();
+#endif
+       end_local_APIC_setup();
+
+       map_cpu_to_logical_apicid();
+
+       setup_portio_remap();
+
+       smpboot_setup_io_apic();
+       /*
+        * Set up local APIC timer on boot CPU.
+        */
+
+       printk(KERN_INFO "CPU%d: ", 0);
+       print_cpu_info(&cpu_data(0));
+       setup_boot_clock();
+}
 /*
  * Early setup to make printk work.
  */
index 5a0f57f3519115f2ba85ca90b119f07229212a9d..3a1b9e40cedb6e5eb7860a5231065f6574002c38 100644 (file)
@@ -74,7 +74,6 @@ EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
 
 u8 apicid_2_node[MAX_APICID];
 
-extern void map_cpu_to_logical_apicid(void);
 extern void unmap_cpu_to_logical_apicid(int cpu);
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -94,144 +93,8 @@ void cpu_exit_clear(void)
 }
 #endif
 
-static int boot_cpu_logical_apicid;
 /* Where the IO area was mapped on multiquad, always 0 otherwise */
 void *xquad_portio;
 #ifdef CONFIG_X86_NUMAQ
 EXPORT_SYMBOL(xquad_portio);
 #endif
-
-static void __init disable_smp(void)
-{
-       cpu_possible_map = cpumask_of_cpu(0);
-       cpu_present_map = cpumask_of_cpu(0);
-       smpboot_clear_io_apic_irqs();
-       if (smp_found_config)
-               phys_cpu_present_map =
-                               physid_mask_of_physid(boot_cpu_physical_apicid);
-       else
-               phys_cpu_present_map = physid_mask_of_physid(0);
-       map_cpu_to_logical_apicid();
-       cpu_set(0, per_cpu(cpu_sibling_map, 0));
-       cpu_set(0, per_cpu(cpu_core_map, 0));
-}
-
-static int __init smp_sanity_check(unsigned max_cpus)
-{
-       if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
-               printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
-                                   "by the BIOS.\n", hard_smp_processor_id());
-               physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-       }
-
-       /*
-        * If we couldn't find an SMP configuration at boot time,
-        * get out of here now!
-        */
-       if (!smp_found_config && !acpi_lapic) {
-               printk(KERN_NOTICE "SMP motherboard not detected.\n");
-               disable_smp();
-               if (APIC_init_uniprocessor())
-                       printk(KERN_NOTICE "Local APIC not detected."
-                                          " Using dummy APIC emulation.\n");
-               return -1;
-       }
-
-       /*
-        * Should not be necessary because the MP table should list the boot
-        * CPU too, but we do it for the sake of robustness anyway.
-        * Makes no sense to do this check in clustered apic mode, so skip it
-        */
-       if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-               printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-                               boot_cpu_physical_apicid);
-               physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-       }
-
-       /*
-        * If we couldn't find a local APIC, then get out of here now!
-        */
-       if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
-               printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-                       boot_cpu_physical_apicid);
-               printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-               smpboot_clear_io_apic();
-               return -1;
-       }
-
-       verify_local_APIC();
-
-       /*
-        * If SMP should be disabled, then really disable it!
-        */
-       if (!max_cpus) {
-               smp_found_config = 0;
-               printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-
-               if (nmi_watchdog == NMI_LOCAL_APIC) {
-                       printk(KERN_INFO "activating minimal APIC for NMI watchdog use.\n");
-                       connect_bsp_APIC();
-                       setup_local_APIC();
-                       end_local_APIC_setup();
-               }
-               smpboot_clear_io_apic();
-               return -1;
-       }
-       return 0;
-}
-
-static void __init smp_cpu_index_default(void)
-{
-       int i;
-       struct cpuinfo_x86 *c;
-
-       for_each_cpu_mask(i, cpu_possible_map) {
-               c = &cpu_data(i);
-               /* mark all to hotplug */
-               c->cpu_index = NR_CPUS;
-       }
-}
-
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
-{
-       nmi_watchdog_default();
-       smp_cpu_index_default();
-       current_cpu_data = boot_cpu_data;
-       cpu_callin_map = cpumask_of_cpu(0);
-       mb();
-
-       /*
-        * Setup boot CPU information
-        */
-       smp_store_cpu_info(0); /* Final full version of the data */
-       boot_cpu_logical_apicid = logical_smp_processor_id();
-       current_thread_info()->cpu = 0;
-
-       set_cpu_sibling_map(0);
-
-       if (smp_sanity_check(max_cpus) < 0) {
-               printk(KERN_INFO "SMP disabled\n");
-               disable_smp();
-               return;
-       }
-
-       if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
-               panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
-                    GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
-               /* Or can we switch back to PIC here? */
-       }
-
-       connect_bsp_APIC();
-       setup_local_APIC();
-       end_local_APIC_setup();
-       map_cpu_to_logical_apicid();
-
-       setup_portio_remap();
-
-       smpboot_setup_io_apic();
-
-       printk(KERN_INFO "CPU%d: ", 0);
-       print_cpu_info(&cpu_data(0));
-       setup_boot_clock();
-}
-
index 775244545ffae5445cc2f7cb185797095008dc6d..66b55629733b05cb8ab9ad249cc60eb8349f333e 100644 (file)
@@ -71,144 +71,3 @@ int smp_threads_ready;
 
 cycles_t cacheflush_time;
 unsigned long cache_decay_ticks;
-
-static int boot_cpu_logical_apicid;
-/*
- * Fall back to non SMP mode after errors.
- *
- * RED-PEN audit/test this more. I bet there is more state messed up here.
- */
-static __init void disable_smp(void)
-{
-       cpu_present_map = cpumask_of_cpu(0);
-       cpu_possible_map = cpumask_of_cpu(0);
-       if (smp_found_config)
-               phys_cpu_present_map =
-                               physid_mask_of_physid(boot_cpu_physical_apicid);
-       else
-               phys_cpu_present_map = physid_mask_of_physid(0);
-       cpu_set(0, per_cpu(cpu_sibling_map, 0));
-       cpu_set(0, per_cpu(cpu_core_map, 0));
-}
-
-/*
- * Various sanity checks.
- */
-static int __init smp_sanity_check(unsigned max_cpus)
-{
-       if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
-               printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-                      hard_smp_processor_id());
-               physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-       }
-
-       /*
-        * If we couldn't find an SMP configuration at boot time,
-        * get out of here now!
-        */
-       if (!smp_found_config && !acpi_lapic) {
-               printk(KERN_NOTICE "SMP motherboard not detected.\n");
-               disable_smp();
-               if (APIC_init_uniprocessor())
-                       printk(KERN_NOTICE "Local APIC not detected."
-                                          " Using dummy APIC emulation.\n");
-               return -1;
-       }
-
-       /*
-        * Should not be necessary because the MP table should list the boot
-        * CPU too, but we do it for the sake of robustness anyway.
-        */
-       if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-               printk(KERN_NOTICE
-                       "weird, boot CPU (#%d) not listed by the BIOS.\n",
-                       boot_cpu_physical_apicid);
-               physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-       }
-
-       /*
-        * If we couldn't find a local APIC, then get out of here now!
-        */
-       if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
-           !cpu_has_apic) {
-               printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-                       boot_cpu_physical_apicid);
-               printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-               smpboot_clear_io_apic();
-               return -1;
-       }
-
-       verify_local_APIC();
-
-       /*
-        * If SMP should be disabled, then really disable it!
-        */
-       if (!max_cpus) {
-               printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-               smpboot_clear_io_apic();
-               return -1;
-       }
-
-       return 0;
-}
-
-static void __init smp_cpu_index_default(void)
-{
-       int i;
-       struct cpuinfo_x86 *c;
-
-       for_each_cpu_mask(i, cpu_possible_map) {
-               c = &cpu_data(i);
-               /* mark all to hotplug */
-               c->cpu_index = NR_CPUS;
-       }
-}
-
-/*
- * Prepare for SMP bootup.  The MP table or ACPI has been read
- * earlier.  Just do some sanity checking here and enable APIC mode.
- */
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
-{
-       nmi_watchdog_default();
-       smp_cpu_index_default();
-       cpu_callin_map = cpumask_of_cpu(0);
-       mb();
-
-       current_cpu_data = boot_cpu_data;
-       boot_cpu_logical_apicid = logical_smp_processor_id();
-       current_thread_info()->cpu = 0;  /* needed? */
-       set_cpu_sibling_map(0);
-
-       if (smp_sanity_check(max_cpus) < 0) {
-               printk(KERN_INFO "SMP disabled\n");
-               disable_smp();
-               return;
-       }
-
-       if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_physical_apicid) {
-               panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
-                    GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_physical_apicid);
-               /* Or can we switch back to PIC here? */
-       }
-
-       /*
-        * Switch from PIC to APIC mode.
-        */
-       setup_local_APIC();
-
-       /*
-        * Enable IO APIC before setting up error vector
-        */
-       if (!skip_ioapic_setup && nr_ioapics)
-               enable_IO_APIC();
-       end_local_APIC_setup();
-
-       /*
-        * Set up local APIC timer on boot CPU.
-        */
-
-       setup_boot_clock();
-       printk(KERN_INFO "CPU%d: ", 0);
-       print_cpu_info(&cpu_data(0));
-}