ASoC: tas2552: Correct PDM configuration register bit definitions
authorPeter Ujfalusi <peter.ujfalusi@ti.com>
Thu, 4 Jun 2015 13:04:16 +0000 (16:04 +0300)
committerMark Brown <broonie@kernel.org>
Thu, 4 Jun 2015 16:50:02 +0000 (17:50 +0100)
The PDM clock can be selected via bit0-1.
PDM_DATA_ES bit is at bit2.

The code were trying to select BCLK as PDM reference clock but instead
it was selecting PLL and set the DATA_ES bit to 1.
Selecting the PLL output as reference clock as default does make sense,
but the driver should not change the PDM data edge.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tas2552.c
sound/soc/codecs/tas2552.h

index 9954bd4c14f3019e85cf059a9df2d476217bf0c2..07a0ec03905dc1b49ee8ee73e29cfd48d3e19332 100644 (file)
@@ -376,7 +376,7 @@ static int tas2552_codec_probe(struct snd_soc_codec *codec)
                                TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ);
        snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I);
        snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8);
-       snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_BCLK_SEL);
+       snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_CLK_SEL_PLL);
        snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 |
                                TAS2552_APT_THRESH_2_1_7);
 
index 6cea8f31bf8862a3672f8886332ba840b7490eea..938d90f1cab9548b1247c542f9b3a271d091e85c 100644 (file)
 #define TAS2552_PDM_DATA_V_I   (0x11 << 6)
 
 /* PDM CFG Register */
-#define TAS2552_PDM_DATA_ES_RISE 0x4
-
-#define TAS2552_PDM_PLL_CLK_SEL 0x00
-#define TAS2552_PDM_IV_CLK_SEL (1 << 1)
-#define TAS2552_PDM_BCLK_SEL   (1 << 2)
-#define TAS2552_PDM_MCLK_SEL   (1 << 3)
+#define TAS2552_PDM_CLK_SEL_PLL                (0x0 << 0)
+#define TAS2552_PDM_CLK_SEL_IVCLKIN    (0x1 << 0)
+#define TAS2552_PDM_CLK_SEL_BCLK       (0x2 << 0)
+#define TAS2552_PDM_CLK_SEL_MCLK       (0x3 << 0)
+#define TAS2552_PDM_CLK_SEL_MASK       TAS2552_PDM_CLK_SEL_MCLK
+#define TAS2552_PDM_DATA_ES            (1 << 2)
 
 /* Boost pass-through register */
 #define TAS2552_APT_DELAY_50   0x00