dt-bindings: display: move ANX7814 and SiI8620 bridge bindings

A few bindings snuck into bindings/video/bridge since consolidating
everything under bindings/display/bridge/. Move them to the correct
spot.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
new file mode 100644 (file)
index 0000000..b2a22c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
@@ -0,0 +1,40 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible          : "analogix,anx7814"
+ - reg                 : I2C address of the device
+ - interrupt-parent    : Should be the phandle of the interrupt controller
+                         that services interrupts for this device
+ - interrupts          : Should contain the INTP interrupt
+ - hpd-gpios           : Which GPIO to use for hpd
+ - pd-gpios            : Which GPIO to use for power down
+ - reset-gpios         : Which GPIO to use for reset
+
+Optional properties:
+
+ - dvdd10-supply       : Regulator for 1.0V digital core power.
+ - Video port for HDMI input, using the DT bindings defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+       anx7814: anx7814@38 {
+               compatible = "analogix,anx7814";
+               reg = <0x38>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
+               hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+               pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+               reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+               port {
+                       anx7814_in: endpoint {
+                               remote-endpoint = <&hdmi0_out>;
+                       };
+               };
+       };

diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
new file mode 100644 (file)
index 0000000..9409d9c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
@@ -0,0 +1,33 @@
+Silicon Image SiI8620 HDMI/MHL bridge bindings
+
+Required properties:
+       - compatible: "sil,sii8620"
+       - reg: i2c address of the bridge
+       - cvcc10-supply: Digital Core Supply Voltage (1.0V)
+       - iovcc18-supply: I/O Supply Voltage (1.8V)
+       - interrupts, interrupt-parent: interrupt specifier of INT pin
+       - reset-gpios: gpio specifier of RESET pin
+       - clocks, clock-names: specification and name of "xtal" clock
+       - video interfaces: Device node can contain video interface port
+                           node for HDMI encoder according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+       sii8620@39 {
+               reg = <0x39>;
+               compatible = "sil,sii8620";
+               cvcc10-supply = <&ldo36_reg>;
+               iovcc18-supply = <&ldo34_reg>;
+               interrupt-parent = <&gpf0>;
+               interrupts = <2 0>;
+               reset-gpio = <&gpv7 0 0>;
+               clocks = <&pmu_system_controller 0>;
+               clock-names = "xtal";
+
+               port {
+                       mhl_to_hdmi: endpoint {
+                               remote-endpoint = <&hdmi_to_mhl>;
+                       };
+               };
+       };

diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
deleted file mode 100644 (file)
index b2a22c2..0000000
--- a/Documentation/devicetree/bindings/video/bridge/anx7814.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Analogix ANX7814 SlimPort (Full-HD Transmitter)
------------------------------------------------
-
-The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
-designed for portable devices.
-
-Required properties:
-
- - compatible          : "analogix,anx7814"
- - reg                 : I2C address of the device
- - interrupt-parent    : Should be the phandle of the interrupt controller
-                         that services interrupts for this device
- - interrupts          : Should contain the INTP interrupt
- - hpd-gpios           : Which GPIO to use for hpd
- - pd-gpios            : Which GPIO to use for power down
- - reset-gpios         : Which GPIO to use for reset
-
-Optional properties:
-
- - dvdd10-supply       : Regulator for 1.0V digital core power.
- - Video port for HDMI input, using the DT bindings defined in [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-       anx7814: anx7814@38 {
-               compatible = "analogix,anx7814";
-               reg = <0x38>;
-               interrupt-parent = <&gpio0>;
-               interrupts = <99 IRQ_TYPE_LEVEL_LOW>;   /* INTP */
-               hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
-               pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
-               reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
-               port {
-                       anx7814_in: endpoint {
-                               remote-endpoint = <&hdmi0_out>;
-                       };
-               };
-       };

diff --git a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
deleted file mode 100644 (file)
index 9409d9c..0000000
--- a/Documentation/devicetree/bindings/video/bridge/sil-sii8620.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Silicon Image SiI8620 HDMI/MHL bridge bindings
-
-Required properties:
-       - compatible: "sil,sii8620"
-       - reg: i2c address of the bridge
-       - cvcc10-supply: Digital Core Supply Voltage (1.0V)
-       - iovcc18-supply: I/O Supply Voltage (1.8V)
-       - interrupts, interrupt-parent: interrupt specifier of INT pin
-       - reset-gpios: gpio specifier of RESET pin
-       - clocks, clock-names: specification and name of "xtal" clock
-       - video interfaces: Device node can contain video interface port
-                           node for HDMI encoder according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-       sii8620@39 {
-               reg = <0x39>;
-               compatible = "sil,sii8620";
-               cvcc10-supply = <&ldo36_reg>;
-               iovcc18-supply = <&ldo34_reg>;
-               interrupt-parent = <&gpf0>;
-               interrupts = <2 0>;
-               reset-gpio = <&gpv7 0 0>;
-               clocks = <&pmu_system_controller 0>;
-               clock-names = "xtal";
-
-               port {
-                       mhl_to_hdmi: endpoint {
-                               remote-endpoint = <&hdmi_to_mhl>;
-                       };
-               };
-       };