pwm: tegra: Don't modify HW state in .remove callback

A consumer is expected to disable a PWM before calling pwm_put(). And if
they didn't there is hopefully a good reason (or the consumer needs
fixing). Also if disabling an enabled PWM was the right thing to do,
this should better be done in the framework instead of in each low level
driver.

So drop the hardware modification from the .remove() callback.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index fa025795198b6932859e1b287adb03ae2472192b..a051cf43e7d7153bc43af75af0857fd020808d96 100644 (file)
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -300,25 +300,12 @@ static int tegra_pwm_probe(struct platform_device *pdev)
 static int tegra_pwm_remove(struct platform_device *pdev)
 {
        struct tegra_pwm_chip *pc = platform_get_drvdata(pdev);
-       unsigned int i;
        int err;
 
        err = clk_prepare_enable(pc->clk);
        if (err < 0)
                return err;
 
-       for (i = 0; i < pc->chip.npwm; i++) {
-               struct pwm_device *pwm = &pc->chip.pwms[i];
-
-               if (!pwm_is_enabled(pwm))
-                       if (clk_prepare_enable(pc->clk) < 0)
-                               continue;
-
-               pwm_writel(pc, i, 0);
-
-               clk_disable_unprepare(pc->clk);
-       }
-
        reset_control_assert(pc->rst);
        clk_disable_unprepare(pc->clk);