arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs

Describe the interconnect paths related to QUPs and add the power-domains
powering them.

This is required for icc sync_state, as otherwise QUP access is gated.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-4-9ba0a9460be2@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e64aa099e193a3a442a1779bd618a2992f219e30..734dee5e5fa1aa6b562c2e5c835179828c684910 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -372,6 +372,12 @@
                };
        };
 
+       qup_virt: interconnect-qup-virt {
+               compatible = "qcom,sm8250-qup-virt";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
        cpu0_opp_table: opp-table-cpu0 {
                compatible = "operating-points-v2";
                opp-shared;
@@ -1024,6 +1030,13 @@
                                dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
                                       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1040,6 +1053,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1056,6 +1075,13 @@
                                dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
                                       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1072,6 +1098,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1088,6 +1120,13 @@
                                dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
                                       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1104,6 +1143,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1120,6 +1165,13 @@
                                dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
                                       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1136,6 +1188,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1151,6 +1209,10 @@
                                interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config";
                                status = "disabled";
                        };
 
@@ -1165,6 +1227,13 @@
                                dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
                                       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1181,6 +1250,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1196,6 +1271,10 @@
                                interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config";
                                status = "disabled";
                        };
 
@@ -1210,6 +1289,13 @@
                                dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
                                       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1226,6 +1312,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1278,6 +1370,13 @@
                                dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1294,6 +1393,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1310,6 +1415,13 @@
                                dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1326,6 +1438,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1342,6 +1460,13 @@
                                dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1358,6 +1483,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1373,6 +1504,10 @@
                                interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config";
                                status = "disabled";
                        };
 
@@ -1387,6 +1522,13 @@
                                dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1403,6 +1545,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1419,6 +1567,13 @@
                                dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1435,6 +1590,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1451,6 +1612,13 @@
                                dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1467,6 +1635,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1483,6 +1657,13 @@
                                dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1499,6 +1680,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1514,6 +1701,10 @@
                                interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config";
                                status = "disabled";
                        };
 
@@ -1528,6 +1719,13 @@
                                dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
                                       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1544,6 +1742,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1593,6 +1797,13 @@
                                dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
                                       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1609,6 +1820,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1625,6 +1842,13 @@
                                dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
                                       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1641,6 +1865,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1657,6 +1887,13 @@
                                dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
                                       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1673,6 +1910,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1689,6 +1932,13 @@
                                dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
                                       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1705,6 +1955,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1721,6 +1977,13 @@
                                dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
                                       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1737,6 +2000,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1752,6 +2021,10 @@
                                interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config";
                                status = "disabled";
                        };
 
@@ -1766,6 +2039,13 @@
                                dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
                                       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
                                dma-names = "tx", "rx";
+                               power-domains = <&rpmhpd SM8250_CX>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";
@@ -1782,6 +2062,12 @@
                                dma-names = "tx", "rx";
                                power-domains = <&rpmhpd RPMHPD_CX>;
                                operating-points-v2 = <&qup_opp_table>;
+                               interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+                                               <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+                                               <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+                               interconnect-names = "qup-core",
+                                                    "qup-config",
+                                                    "qup-memory";
                                #address-cells = <1>;
                                #size-cells = <0>;
                                status = "disabled";