dt-bindings: iio: adc: adi,ad7606: add SPI offload properties

Add #trigger-source-cells property to allow the BUSY output to be
used as a SPI offload trigger source to indicate when a sample is ready
to be read.

Macros are added to adi,ad7606.h for the cell values to help with
readability since they are arbitrary values.

Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250403-wip-bl-spi-offload-ad7606-v1-1-1b00cb638b12@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 52d3f1ce336783084d601d361779ebc766124f7a..29f12d650442b8ff2eb455306ce59a0e87867ddd 100644 (file)
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -45,6 +45,14 @@ properties:
   "#size-cells":
     const: 0
 
+  '#trigger-source-cells':
+    description: |
+      Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA.
+
+      For convenience, macros for these values are available in
+      dt-bindings/iio/adc/adi,ad7606.h.
+    const: 1
+
   # According to the datasheet, "Data is clocked in from SDI on the falling
   # edge of SCLK, while data is clocked out on DOUTA on the rising edge of
   # SCLK".  Also, even if not stated textually in the datasheet, it is made

diff --git a/include/dt-bindings/iio/adc/adi,ad7606.h b/include/dt-bindings/iio/adc/adi,ad7606.h
new file mode 100644 (file)
index 0000000..f38a6d7
--- /dev/null
+++ b/include/dt-bindings/iio/adc/adi,ad7606.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+
+#ifndef _DT_BINDINGS_ADI_AD7606_H
+#define _DT_BINDINGS_ADI_AD7606_H
+
+#define AD7606_TRIGGER_EVENT_BUSY      0
+#define AD7606_TRIGGER_EVENT_FRSTDATA  1
+
+#endif /* _DT_BINDINGS_ADI_AD7606_H */