[PATCH] x86: pci_assign_unassigned_resources() update
authorIvan Kokshaysky <ink@jurassic.park.msu.ru>
Tue, 30 Aug 2005 14:48:52 +0000 (18:48 +0400)
committerLinus Torvalds <torvalds@g5.osdl.org>
Tue, 30 Aug 2005 18:14:48 +0000 (11:14 -0700)
I had some time to think about PCI assign issues in 2.6.13-rc series.

The major problem here is that we call pci_assign_unassigned_resources()
way too early - at subsys_initcall level. Therefore we give no chances
to ACPI and PnP routines (called at fs_initcall level) to reserve their
respective resources properly, as the comments in drivers/pnp/system.c
and drivers/acpi/motherboard.c suggest:

 /**
  * Reserve motherboard resources after PCI claim BARs,
  * but before PCI assign resources for uninitialized PCI devices
  */

So I moved the pci_assign_unassigned_resources() call to
pcibios_assign_resources() (fs_initcall), which should hopefully fix a
lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary.

Other changes:
- remove resource assignment code from pcibios_assign_resources(), since
  it duplicates pci_assign_unassigned_resources() functionality and
  actually does nothing in 2.6.13;
- modify ROM assignment code as per Ben's suggestion: try to use firmware
  settings by default (if PCI_ASSIGN_ROMS is not set);
- set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for
  various setups.

Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with
the 4kB CardBus IO size previously).

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arch/i386/pci/common.c
arch/i386/pci/i386.c
drivers/pci/setup-bus.c

index ade5bc57c34ceffc54c0e1f3a79f52879bc062e9..c96bea14b98f51301c0ec5a2be83d6142a1b646c 100644 (file)
@@ -165,7 +165,6 @@ static int __init pcibios_init(void)
        if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
                pcibios_sort();
 #endif
-       pci_assign_unassigned_resources();
        return 0;
 }
 
index 93a364c82150cddbe8886f8fc35d026120ae0e75..3cc480998a47d4000013cd093aeb0e26b7a5d2ff 100644 (file)
@@ -170,43 +170,26 @@ static void __init pcibios_allocate_resources(int pass)
 static int __init pcibios_assign_resources(void)
 {
        struct pci_dev *dev = NULL;
-       int idx;
-       struct resource *r;
-
-       for_each_pci_dev(dev) {
-               int class = dev->class >> 8;
-
-               /* Don't touch classless devices and host bridges */
-               if (!class || class == PCI_CLASS_BRIDGE_HOST)
-                       continue;
-
-               for(idx=0; idx<6; idx++) {
-                       r = &dev->resource[idx];
-
-                       /*
-                        *  Don't touch IDE controllers and I/O ports of video cards!
-                        */
-                       if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
-                           (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO)))
-                               continue;
-
-                       /*
-                        *  We shall assign a new address to this resource, either because
-                        *  the BIOS forgot to do so or because we have decided the old
-                        *  address was unusable for some reason.
-                        */
-                       if (!r->start && r->end)
-                               pci_assign_resource(dev, idx);
-               }
+       struct resource *r, *pr;
 
-               if (pci_probe & PCI_ASSIGN_ROMS) {
+       if (!(pci_probe & PCI_ASSIGN_ROMS)) {
+               /* Try to use BIOS settings for ROMs, otherwise let
+                  pci_assign_unassigned_resources() allocate the new
+                  addresses. */
+               for_each_pci_dev(dev) {
                        r = &dev->resource[PCI_ROM_RESOURCE];
-                       r->end -= r->start;
-                       r->start = 0;
-                       if (r->end)
-                               pci_assign_resource(dev, PCI_ROM_RESOURCE);
+                       if (!r->flags || !r->start)
+                               continue;
+                       pr = pci_find_parent_resource(dev, r);
+                       if (!pr || request_resource(pr, r) < 0) {
+                               r->end -= r->start;
+                               r->start = 0;
+                       }
                }
        }
+
+       pci_assign_unassigned_resources();
+
        return 0;
 }
 
index 6d864c502a1f71f7c1ce57ab14718bc81b11fe9c..6b0e6464eb391130d1751be13620ae38fd7d5635 100644 (file)
@@ -40,7 +40,7 @@
  * FIXME: IO should be max 256 bytes.  However, since we may
  * have a P2P bridge below a cardbus bridge, we need 4K.
  */
-#define CARDBUS_IO_SIZE                (256)
+#define CARDBUS_IO_SIZE                (4*1024)
 #define CARDBUS_MEM_SIZE       (32*1024*1024)
 
 static void __devinit