arm64: dts: Amlogic updates for v5.7
- sound, bluetooth, thermal updates
- A1: add secure power domain nodes
- misc. cleanups
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add thermal zones to meson gx devices
arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi
arm64: dts: meson-g12b: fix N2/VIM3 audio card model names
arm64: dts: meson-gxbb-vega-s95: fix bluetooth node
arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes
arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson: sei510: fix sound card codec node
arm64: dts: meson: s400: fix sound card codec nodes
arm64: dts: meson: add pdm reset line
arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
arm64: dts: amlogic: add rc-videostrong-kii-pro keymap
arm64: dts: meson: a1: add secure power domain controller
Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
+
+ pwrc: power-controller {
+ compatible = "amlogic,meson-a1-pwrc";
+ #power-domain-cells = <1>;
+ status = "okay";
+ };
};
soc {
dai-tdm-slot-rx-mask-1 = <1 1>;
mclk-fs = <256>;
- codec@0 {
+ codec-0 {
sound-dai = <&lineout>;
};
- codec@1 {
+ codec-1 {
sound-dai = <&speaker_amp1>;
};
- codec@2 {
+ codec-2 {
sound-dai = <&linein>;
};
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
+ snps,parkmode-disable-ss-quirk;
};
};
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
+ resets = <&clkc_audio AUD_RESET_PDM>;
status = "disabled";
};
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
- codec@0 {
+ codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
+ model = "Khadas VIM3";
+
vddcpu_a: regulator-vddcpu-a {
/*
* MP8756GD Regulator.
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-KHADAS-VIM3";
+ model = "G12B-KHADAS-VIM3";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
sound {
compatible = "amlogic,axg-sound-card";
- model = "G12A-ODROIDN2";
+ model = "G12B-ODROID-N2";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
+ #cooling-cells = <2>;
};
l2: l2-cache0 {
};
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&scpi_sensors 0>;
+
+ trips {
+ cpu_passive: cpu-passive {
+ temperature = <80000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+
+ cpu_hot: cpu-hot {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "hot";
+ };
+
+ cpu_critical: cpu-critical {
+ temperature = <110000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cpu_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&cpu_passive>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ trip = <&cpu_hot>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
};
};
};
+
+&ir {
+ linux,rc-map-name = "rc-videostrong-kii-pro";
+};
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
+ linux,rc-map-name = "rc-odroid";
};
&gpio_ao {
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
};
};
/ {
aliases {
serial0 = &uart_AO;
- serial1 = &uart_A;
ethernet0 = ðmac;
};
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
};
&uart_AO {
/dts-v1/;
#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
#include "meson-gxm.dtsi"
clock-names = "ext_clock";
};
- thermal-zones {
- cpu-thermal {
- polling-delay-passive = <250>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
-
- thermal-sensors = <&scpi_sensors 0>;
-
- trips {
- cpu_alert0: cpu-alert0 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "active";
- };
-
- cpu_alert1: cpu-alert1 {
- temperature = <80000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
- };
-
- map1 {
- trip = <&cpu_alert1>;
- cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
hdmi_5v: regulator-hdmi-5v {
compatible = "regulator-fixed";
hdmi-phandle = <&hdmi_tx>;
};
-&cpu0 {
- #cooling-cells = <2>;
-};
-
-&cpu1 {
- #cooling-cells = <2>;
-};
-
-&cpu2 {
- #cooling-cells = <2>;
-};
-&cpu3 {
- #cooling-cells = <2>;
-};
-
-&cpu4 {
- #cooling-cells = <2>;
-};
-
-&cpu5 {
- #cooling-cells = <2>;
-};
-
-&cpu6 {
- #cooling-cells = <2>;
-};
+&cpu_cooling_maps {
+ map0 {
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+ };
-&cpu7 {
- #cooling-cells = <2>;
+ map1 {
+ cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
};
ðmac {
#size-cells = <0>;
bus-width = <4>;
- max-frequency = <50000000>;
+ max-frequency = <60000000>;
non-removable;
disable-wp;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu5: cpu@101 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu6: cpu@102 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
cpu7: cpu@103 {
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 1>;
+ #cooling-cells = <2>;
};
};
};
compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
};
+&cpu_cooling_maps {
+ map0 {
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ map1 {
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
&saradc {
compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
};
#include <dt-bindings/gpio/meson-g12a-gpio.h>
/ {
- model = "Khadas VIM3";
-
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
+ resets = <&clkc_audio AUD_RESET_PDM>;
status = "disabled";
};
};
projects / linux-block.git / commitdiff