drm/gma500/cdv: Convert to gma_crtc_dpms()
authorPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Wed, 10 Jul 2013 16:12:11 +0000 (18:12 +0200)
committerPatrik Jakobsson <patrik.r.jakobsson@gmail.com>
Tue, 23 Jul 2013 23:47:22 +0000 (01:47 +0200)
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
drivers/gpu/drm/gma500/cdv_intel_display.c
drivers/gpu/drm/gma500/gma_display.c
drivers/gpu/drm/gma500/gma_display.h

index 9eee57b3cc594ce6fd7461b767a4c4f967a2830d..1160175f16f93ab6a0d738753dbff2f8c5705d4f 100644 (file)
@@ -512,7 +512,7 @@ static bool is_pipeb_lvds(struct drm_device *dev, struct drm_crtc *crtc)
        return false;
 }
 
-static void cdv_intel_disable_self_refresh (struct drm_device *dev)
+void cdv_intel_disable_self_refresh(struct drm_device *dev)
 {
        if (REG_READ(FW_BLC_SELF) & FW_BLC_SELF_EN) {
 
@@ -533,7 +533,7 @@ static void cdv_intel_disable_self_refresh (struct drm_device *dev)
 
 }
 
-static void cdv_intel_update_watermark (struct drm_device *dev, struct drm_crtc *crtc)
+void cdv_intel_update_watermark(struct drm_device *dev, struct drm_crtc *crtc)
 {
 
        if (cdv_intel_single_pipe_active(dev)) {
@@ -645,137 +645,6 @@ static void cdv_intel_crtc_load_lut(struct drm_crtc *crtc)
        }
 }
 
-/**
- * Sets the power management mode of the pipe and plane.
- *
- * This code should probably grow support for turning the cursor off and back
- * on appropriately at the same time as we're turning the pipe off/on.
- */
-static void cdv_intel_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
-       struct drm_device *dev = crtc->dev;
-       struct drm_psb_private *dev_priv = dev->dev_private;
-       struct psb_intel_crtc *psb_intel_crtc = to_psb_intel_crtc(crtc);
-       int pipe = psb_intel_crtc->pipe;
-       const struct psb_offset *map = &dev_priv->regmap[pipe];
-       u32 temp;
-
-       /* XXX: When our outputs are all unaware of DPMS modes other than off
-        * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
-        */
-       cdv_intel_disable_self_refresh(dev);
-
-       switch (mode) {
-       case DRM_MODE_DPMS_ON:
-       case DRM_MODE_DPMS_STANDBY:
-       case DRM_MODE_DPMS_SUSPEND:
-               if (psb_intel_crtc->active)
-                       break;
-
-               psb_intel_crtc->active = true;
-
-               /* Enable the DPLL */
-               temp = REG_READ(map->dpll);
-               if ((temp & DPLL_VCO_ENABLE) == 0) {
-                       REG_WRITE(map->dpll, temp);
-                       REG_READ(map->dpll);
-                       /* Wait for the clocks to stabilize. */
-                       udelay(150);
-                       REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
-                       REG_READ(map->dpll);
-                       /* Wait for the clocks to stabilize. */
-                       udelay(150);
-                       REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
-                       REG_READ(map->dpll);
-                       /* Wait for the clocks to stabilize. */
-                       udelay(150);
-               }
-
-               /* Jim Bish - switch plan and pipe per scott */
-               /* Enable the plane */
-               temp = REG_READ(map->cntr);
-               if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
-                       REG_WRITE(map->cntr,
-                                 temp | DISPLAY_PLANE_ENABLE);
-                       /* Flush the plane changes */
-                       REG_WRITE(map->base, REG_READ(map->base));
-               }
-
-               udelay(150);
-
-               /* Enable the pipe */
-               temp = REG_READ(map->conf);
-               if ((temp & PIPEACONF_ENABLE) == 0)
-                       REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
-
-               temp = REG_READ(map->status);
-               temp &= ~(0xFFFF);
-               temp |= PIPE_FIFO_UNDERRUN;
-               REG_WRITE(map->status, temp);
-               REG_READ(map->status);
-
-               cdv_intel_crtc_load_lut(crtc);
-
-               /* Give the overlay scaler a chance to enable
-                * if it's on this pipe */
-               /* psb_intel_crtc_dpms_video(crtc, true); TODO */
-               break;
-       case DRM_MODE_DPMS_OFF:
-               if (!psb_intel_crtc->active)
-                       break;
-
-               psb_intel_crtc->active = false;
-
-               /* Give the overlay scaler a chance to disable
-                * if it's on this pipe */
-               /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
-
-               /* Disable the VGA plane that we never use */
-               REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
-
-               /* Jim Bish - changed pipe/plane here as well. */
-
-               drm_vblank_off(dev, pipe);
-               /* Wait for vblank for the disable to take effect */
-               gma_wait_for_vblank(dev);
-
-               /* Next, disable display pipes */
-               temp = REG_READ(map->conf);
-               if ((temp & PIPEACONF_ENABLE) != 0) {
-                       REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
-                       REG_READ(map->conf);
-               }
-
-               /* Wait for vblank for the disable to take effect. */
-               gma_wait_for_vblank(dev);
-
-               udelay(150);
-
-               /* Disable display plane */
-               temp = REG_READ(map->cntr);
-               if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
-                       REG_WRITE(map->cntr,
-                                 temp & ~DISPLAY_PLANE_ENABLE);
-                       /* Flush the plane changes */
-                       REG_WRITE(map->base, REG_READ(map->base));
-                       REG_READ(map->base);
-               }
-
-               temp = REG_READ(map->dpll);
-               if ((temp & DPLL_VCO_ENABLE) != 0) {
-                       REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
-                       REG_READ(map->dpll);
-               }
-
-               /* Wait for the clocks to turn off. */
-               udelay(150);
-               break;
-       }
-       cdv_intel_update_watermark(dev, crtc);
-       /*Set FIFO Watermarks*/
-       REG_WRITE(DSPARB, 0x3F3E);
-}
-
 /**
  * Return the pipe currently connected to the panel fitter,
  * or -1 if the panel fitter is not present or not in use
@@ -1518,7 +1387,7 @@ struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
 }
 
 const struct drm_crtc_helper_funcs cdv_intel_helper_funcs = {
-       .dpms = cdv_intel_crtc_dpms,
+       .dpms = gma_crtc_dpms,
        .mode_fixup = gma_crtc_mode_fixup,
        .mode_set = cdv_intel_crtc_mode_set,
        .mode_set_base = gma_pipe_set_base,
index 297937d12fb9763fb47704aedfefd8c3d967052e..7a0888a64a33131e98f5566aa5e62dde8cc24f60 100644 (file)
@@ -210,10 +210,8 @@ void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
         * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
         */
 
-       /* FIXME: Uncomment this when we move cdv to generic dpms
        if (IS_CDV(dev))
                cdv_intel_disable_self_refresh(dev);
-       */
 
        switch (mode) {
        case DRM_MODE_DPMS_ON:
@@ -322,10 +320,8 @@ void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
                break;
        }
 
-       /* FIXME: Uncomment this when we move cdv to generic dpms
        if (IS_CDV(dev))
                cdv_intel_update_watermark(dev, crtc);
-       */
 
        /* Set FIFO watermarks */
        REG_WRITE(DSPARB, 0x3F3E);
index 24a582e009e6d9b49f434fa5657f6d68ee4b64f0..665164d4122473273651ae7af7fd52282bc3d722 100644 (file)
@@ -85,4 +85,9 @@ extern bool gma_pll_is_valid(struct drm_crtc *crtc,
 extern bool gma_find_best_pll(const struct gma_limit_t *limit,
                              struct drm_crtc *crtc, int target, int refclk,
                              struct gma_clock_t *best_clock);
+
+/* Cedarview specific functions */
+extern void cdv_intel_disable_self_refresh(struct drm_device *dev);
+extern void cdv_intel_update_watermark(struct drm_device *dev,
+                                      struct drm_crtc *crtc);
 #endif