staging: brcm80211: remove static global variables from dhd_sdio.c
authorArend van Spriel <arend@broadcom.com>
Fri, 16 Sep 2011 19:28:07 +0000 (12:28 -0700)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 16 Sep 2011 19:39:42 +0000 (21:39 +0200)
Several global variables that were set but never initialized have
been removed.

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c

index dade3ec8dd605ceb32ce04ebbd0969775b540468..720f567bf6cdc69a9c616b2bbf9d9300a62e313a 100644 (file)
@@ -761,26 +761,18 @@ module_param(brcmf_poll, uint, 0);
 uint brcmf_intr = true;
 module_param(brcmf_intr, uint, 0);
 
-/* IOCTL response timeout */
-static int brcmf_ioctl_timeout_msec = IOCTL_RESP_TIMEOUT;
-
 /* override the RAM size if possible */
 #define DONGLE_MIN_MEMSIZE (128 * 1024)
 int brcmf_dongle_memsize;
 module_param(brcmf_dongle_memsize, int, 0);
 
-static bool brcmf_alignctl;
-
-static bool retrydata;
-#define RETRYCHAN(chan) (((chan) == SDPCM_EVENT_CHANNEL) || retrydata)
-
-static const uint firstread = BRCMF_FIRSTREAD;
+#define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
 
 /* Retry count for register access failures */
 static const uint retry_limit = 2;
 
-/* Force even SD lengths (some host controllers mess up on odd bytes) */
-static bool forcealign;
+/* Limit on rounding up frames */
+static const uint max_roundup = 512;
 
 #define ALIGNMENT  4
 
@@ -794,12 +786,6 @@ static void pkt_align(struct sk_buff *p, int len, int align)
        __skb_trim(p, len);
 }
 
-/* Limit on rounding up frames */
-static const uint max_roundup = 512;
-
-/* Try doing readahead */
-static bool brcmf_readahead;
-
 /* To check if there's window offered */
 static bool data_ok(struct brcmf_bus *bus)
 {
@@ -1697,7 +1683,7 @@ static int brcmf_sdbrcm_ioctl_resp_wait(struct brcmf_bus *bus, uint *condition,
                                        bool *pending)
 {
        DECLARE_WAITQUEUE(wait, current);
-       int timeout = msecs_to_jiffies(brcmf_ioctl_timeout_msec);
+       int timeout = msecs_to_jiffies(IOCTL_RESP_TIMEOUT);
 
        /* Wait until control frame is available */
        add_wait_queue(&bus->ioctl_resp_wait, &wait);
@@ -1733,21 +1719,19 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
 
        /* Set rxctl for frame (w/optional alignment) */
        bus->rxctl = bus->rxbuf;
-       if (brcmf_alignctl) {
-               bus->rxctl += firstread;
-               pad = ((unsigned long)bus->rxctl % BRCMF_SDALIGN);
-               if (pad)
-                       bus->rxctl += (BRCMF_SDALIGN - pad);
-               bus->rxctl -= firstread;
-       }
+       bus->rxctl += BRCMF_FIRSTREAD;
+       pad = ((unsigned long)bus->rxctl % BRCMF_SDALIGN);
+       if (pad)
+               bus->rxctl += (BRCMF_SDALIGN - pad);
+       bus->rxctl -= BRCMF_FIRSTREAD;
 
        /* Copy the already-read portion over */
-       memcpy(bus->rxctl, hdr, firstread);
-       if (len <= firstread)
+       memcpy(bus->rxctl, hdr, BRCMF_FIRSTREAD);
+       if (len <= BRCMF_FIRSTREAD)
                goto gotpkt;
 
        /* Raise rdlen to next SDIO block to avoid tail command */
-       rdlen = len - firstread;
+       rdlen = len - BRCMF_FIRSTREAD;
        if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
                pad = bus->blocksize - (rdlen % bus->blocksize);
                if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
@@ -1758,11 +1742,11 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
        }
 
        /* Satisfy length-alignment requirements */
-       if (forcealign && (rdlen & (ALIGNMENT - 1)))
+       if (rdlen & (ALIGNMENT - 1))
                rdlen = roundup(rdlen, ALIGNMENT);
 
        /* Drop if the read is too big or it exceeds our maximum */
-       if ((rdlen + firstread) > bus->drvr->maxctl) {
+       if ((rdlen + BRCMF_FIRSTREAD) > bus->drvr->maxctl) {
                brcmf_dbg(ERROR, "%d-byte control read exceeds %d-byte buffer\n",
                          rdlen, bus->drvr->maxctl);
                bus->drvr->rx_errors++;
@@ -1783,7 +1767,7 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
        sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
                                bus->sdiodev->sbwad,
                                SDIO_FUNC_2,
-                               F2SYNC, (bus->rxctl + firstread), rdlen,
+                               F2SYNC, (bus->rxctl + BRCMF_FIRSTREAD), rdlen,
                                NULL);
        bus->f2rxdata++;
 
@@ -1857,7 +1841,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
                }
 
                /* Try doing single read if we can */
-               if (brcmf_readahead && bus->nextlen) {
+               if (bus->nextlen) {
                        u16 nextlen = bus->nextlen;
                        bus->nextlen = 0;
 
@@ -1871,7 +1855,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
                                    (rdlen % bus->blocksize);
                                if ((pad <= bus->roundup)
                                    && (pad < bus->blocksize)
-                                   && ((rdlen + pad + firstread) <
+                                   && ((rdlen + pad + BRCMF_FIRSTREAD) <
                                        MAX_RX_DATASZ))
                                        rdlen += pad;
                        } else if (rdlen % BRCMF_SDALIGN) {
@@ -2055,8 +2039,8 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
 
                /* Read frame header (hardware and software) */
                sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
-                               SDIO_FUNC_2, F2SYNC, bus->rxhdr, firstread,
-                               NULL);
+                                             SDIO_FUNC_2, F2SYNC, bus->rxhdr,
+                                             BRCMF_FIRSTREAD, NULL);
                bus->f2rxhdrs++;
 
                if (sdret < 0) {
@@ -2162,24 +2146,24 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
                   SDPCM_GLOM_CHANNEL */
 
                /* Length to read */
-               rdlen = (len > firstread) ? (len - firstread) : 0;
+               rdlen = (len > BRCMF_FIRSTREAD) ? (len - BRCMF_FIRSTREAD) : 0;
 
                /* May pad read to blocksize for efficiency */
                if (bus->roundup && bus->blocksize &&
                        (rdlen > bus->blocksize)) {
                        pad = bus->blocksize - (rdlen % bus->blocksize);
                        if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
-                           ((rdlen + pad + firstread) < MAX_RX_DATASZ))
+                           ((rdlen + pad + BRCMF_FIRSTREAD) < MAX_RX_DATASZ))
                                rdlen += pad;
                } else if (rdlen % BRCMF_SDALIGN) {
                        rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
                }
 
                /* Satisfy length-alignment requirements */
-               if (forcealign && (rdlen & (ALIGNMENT - 1)))
+               if (rdlen & (ALIGNMENT - 1))
                        rdlen = roundup(rdlen, ALIGNMENT);
 
-               if ((rdlen + firstread) > MAX_RX_DATASZ) {
+               if ((rdlen + BRCMF_FIRSTREAD) > MAX_RX_DATASZ) {
                        /* Too long -- skip this frame */
                        brcmf_dbg(ERROR, "too long: len %d rdlen %d\n",
                                  len, rdlen);
@@ -2189,7 +2173,8 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
                        continue;
                }
 
-               pkt = brcmu_pkt_buf_get_skb(rdlen + firstread + BRCMF_SDALIGN);
+               pkt = brcmu_pkt_buf_get_skb(rdlen +
+                                           BRCMF_FIRSTREAD + BRCMF_SDALIGN);
                if (!pkt) {
                        /* Give up on data, request rtx of events */
                        brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: rdlen %d chan %d\n",
@@ -2200,7 +2185,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
                }
 
                /* Leave room for what we already read, and align remainder */
-               skb_pull(pkt, firstread);
+               skb_pull(pkt, BRCMF_FIRSTREAD);
                pkt_align(pkt, rdlen, BRCMF_SDALIGN);
 
                /* Read the remaining frame data */
@@ -2221,8 +2206,8 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
                }
 
                /* Copy the already-read portion */
-               skb_push(pkt, firstread);
-               memcpy(pkt->data, bus->rxhdr, firstread);
+               skb_push(pkt, BRCMF_FIRSTREAD);
+               memcpy(pkt->data, bus->rxhdr, BRCMF_FIRSTREAD);
 
 #ifdef BCMDBG
                if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
@@ -2328,7 +2313,6 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_bus *bus, struct sk_buff *pkt,
        u8 *frame;
        u16 len, pad = 0;
        u32 swheader;
-       uint retries = 0;
        struct sk_buff *new;
        int i;
 
@@ -2413,48 +2397,44 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_bus *bus, struct sk_buff *pkt,
        }
 
        /* Some controllers have trouble with odd bytes -- round to even */
-       if (forcealign && (len & (ALIGNMENT - 1)))
+       if (len & (ALIGNMENT - 1))
                        len = roundup(len, ALIGNMENT);
 
-       do {
-               ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
-                                           SDIO_FUNC_2, F2SYNC, frame,
-                                           len, pkt);
-               bus->f2txdata++;
+       ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
+                                   SDIO_FUNC_2, F2SYNC, frame,
+                                   len, pkt);
+       bus->f2txdata++;
 
-               if (ret < 0) {
-                       /* On failure, abort the command
-                        and terminate the frame */
-                       brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
-                                 ret);
-                       bus->tx_sderrs++;
+       if (ret < 0) {
+               /* On failure, abort the command and terminate the frame */
+               brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
+                         ret);
+               bus->tx_sderrs++;
 
-                       brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
-                       brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
-                                        SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
-                                        NULL);
-                       bus->f1regdata++;
-
-                       for (i = 0; i < 3; i++) {
-                               u8 hi, lo;
-                               hi = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                                    SDIO_FUNC_1,
-                                                    SBSDIO_FUNC1_WFRAMEBCHI,
-                                                    NULL);
-                               lo = brcmf_sdcard_cfg_read(bus->sdiodev,
-                                                    SDIO_FUNC_1,
-                                                    SBSDIO_FUNC1_WFRAMEBCLO,
-                                                    NULL);
-                               bus->f1regdata += 2;
-                               if ((hi == 0) && (lo == 0))
-                                       break;
-                       }
+               brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
+               brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
+                                SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
+                                NULL);
+               bus->f1regdata++;
 
+               for (i = 0; i < 3; i++) {
+                       u8 hi, lo;
+                       hi = brcmf_sdcard_cfg_read(bus->sdiodev,
+                                            SDIO_FUNC_1,
+                                            SBSDIO_FUNC1_WFRAMEBCHI,
+                                            NULL);
+                       lo = brcmf_sdcard_cfg_read(bus->sdiodev,
+                                            SDIO_FUNC_1,
+                                            SBSDIO_FUNC1_WFRAMEBCLO,
+                                            NULL);
+                       bus->f1regdata += 2;
+                       if ((hi == 0) && (lo == 0))
+                               break;
                }
-               if (ret == 0)
-                       bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
 
-       } while ((ret < 0) && retrydata && retries++ < TXRETRIES);
+       }
+       if (ret == 0)
+               bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
 
 done:
        /* restore pkt buffer pointer before calling tx complete routine */
@@ -3259,16 +3239,14 @@ brcmf_sdbrcm_bus_txctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen)
        len = (msglen += SDPCM_HDRLEN);
 
        /* Add alignment padding (optional for ctl frames) */
-       if (brcmf_alignctl) {
-               doff = ((unsigned long)frame % BRCMF_SDALIGN);
-               if (doff) {
-                       frame -= doff;
-                       len += doff;
-                       msglen += doff;
-                       memset(frame, 0, doff + SDPCM_HDRLEN);
-               }
-               /* precondition: doff < BRCMF_SDALIGN */
+       doff = ((unsigned long)frame % BRCMF_SDALIGN);
+       if (doff) {
+               frame -= doff;
+               len += doff;
+               msglen += doff;
+               memset(frame, 0, doff + SDPCM_HDRLEN);
        }
+       /* precondition: doff < BRCMF_SDALIGN */
        doff += SDPCM_HDRLEN;
 
        /* Round send length to next SDIO block */
@@ -3281,7 +3259,7 @@ brcmf_sdbrcm_bus_txctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen)
        }
 
        /* Satisfy length-alignment requirements */
-       if (forcealign && (len & (ALIGNMENT - 1)))
+       if (len & (ALIGNMENT - 1))
                len = roundup(len, ALIGNMENT);
 
        /* precondition: IS_ALIGNED((unsigned long)frame, 2) */
@@ -4825,14 +4803,9 @@ void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype,
         */
        brcmf_txbound = BRCMF_TXBOUND;
        brcmf_rxbound = BRCMF_RXBOUND;
-       brcmf_alignctl = true;
-       brcmf_readahead = true;
-       retrydata = false;
        brcmf_dongle_memsize = 0;
        brcmf_txminmax = BRCMF_TXMINMAX;
 
-       forcealign = true;
-
        brcmf_c_init();
 
        brcmf_dbg(TRACE, "Enter\n");