ARM: i.MX: Remove mach-cpuimx27sd board file
authorAlexander Shiyan <shc_work@mail.ru>
Sat, 26 Jul 2014 13:41:08 +0000 (17:41 +0400)
committerShawn Guo <shawn.guo@freescale.com>
Mon, 1 Sep 2014 14:00:01 +0000 (22:00 +0800)
eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their
devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and
imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Eric BĂ©nard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
arch/arm/configs/imx_v4_v5_defconfig
arch/arm/mach-imx/Kconfig
arch/arm/mach-imx/Makefile
arch/arm/mach-imx/eukrea-baseboards.h
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c [deleted file]
arch/arm/mach-imx/mach-cpuimx27.c [deleted file]

index 63bde0efc0419b9e4981a369d5b3068d5b560932..f53074cc6a55267c6f0d56dba83b39420fc962bb 100644 (file)
@@ -31,9 +31,6 @@ CONFIG_MACH_EUKREA_CPUIMX25SD=y
 CONFIG_MACH_IMX25_DT=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
-CONFIG_MACH_CPUIMX27=y
-CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
-CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
 CONFIG_MACH_MX27_3DS=y
 CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_PCA100=y
index be9a51afe05a02ff374f6c4d73db362907fa49ea..e9a04590f729d99335ee4299be4a26202860366c 100644 (file)
@@ -253,56 +253,6 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
-config MACH_CPUIMX27
-       bool "Eukrea CPUIMX27 module"
-       select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-       select IMX_HAVE_PLATFORM_IMX2_WDT
-       select IMX_HAVE_PLATFORM_IMX_I2C
-       select IMX_HAVE_PLATFORM_IMX_UART
-       select IMX_HAVE_PLATFORM_MXC_EHCI
-       select IMX_HAVE_PLATFORM_MXC_NAND
-       select IMX_HAVE_PLATFORM_MXC_W1
-       select USB_ULPI_VIEWPORT if USB_ULPI
-       select SOC_IMX27
-       help
-         Include support for Eukrea CPUIMX27 platform. This includes
-         specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-       bool "CPUIMX27 integrates SDHC2 module"
-       depends on MACH_CPUIMX27
-       select IMX_HAVE_PLATFORM_MXC_MMC
-       help
-         This adds support for the internal SDHC2 used on CPUIMX27
-         for wifi or eMMC.
-
-config MACH_EUKREA_CPUIMX27_USEUART4
-       bool "CPUIMX27 integrates UART4 module"
-       depends on MACH_CPUIMX27
-       help
-         This adds support for the internal UART4 used on CPUIMX27
-         for bluetooth.
-
-choice
-       prompt "Baseboard"
-       depends on MACH_CPUIMX27
-       default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-       bool "Eukrea MBIMX27 development board"
-       select IMX_HAVE_PLATFORM_IMX_FB
-       select IMX_HAVE_PLATFORM_IMX_KEYPAD
-       select IMX_HAVE_PLATFORM_IMX_SSI
-       select IMX_HAVE_PLATFORM_IMX_UART
-       select IMX_HAVE_PLATFORM_MXC_MMC
-       select IMX_HAVE_PLATFORM_SPI_IMX
-       select LEDS_GPIO_REGISTER
-       help
-         This adds board specific devices that can be found on Eukrea's
-         MBIMX27 evaluation board.
-
-endchoice
-
 config MACH_MX27_3DS
        bool "MX27PDK platform"
        select IMX_HAVE_PLATFORM_FSL_USB2_UDC
index 23c02932bf843e1c4862f7c18b16b49f4a0d4551..30f3f5e9792afb09cbe4d432df5e7276e2d6b59b 100644 (file)
@@ -60,8 +60,6 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
 obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
 obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
index a21d3313f9942eeb5233e74490d2f68c78ae1b4b..bb2c90d6591470ac12be2d11104adf33a35bd3a1 100644 (file)
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
- * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
- * or eukrea_cpuimx51sd_init().
+ * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
  *
  * This example here is for the development board. Refer
  * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
  * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
- * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
  */
 
 extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimx27_baseboard_init(void);
 extern void eukrea_mbimxsd35_baseboard_init(void);
-extern void eukrea_mbimx51_baseboard_init(void);
-extern void eukrea_mbimxsd51_baseboard_init(void);
 
 #endif
 
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
deleted file mode 100644 (file)
index b2f08bf..0000000
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/backlight.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int eukrea_mbimx27_pins[] __initconst = {
-       /* UART2 */
-       PE3_PF_UART2_CTS,
-       PE4_PF_UART2_RTS,
-       PE6_PF_UART2_TXD,
-       PE7_PF_UART2_RXD,
-       /* UART3 */
-       PE8_PF_UART3_TXD,
-       PE9_PF_UART3_RXD,
-       PE10_PF_UART3_CTS,
-       PE11_PF_UART3_RTS,
-       /* UART4 */
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-       PB26_AF_UART4_RTS,
-       PB28_AF_UART4_TXD,
-       PB29_AF_UART4_CTS,
-       PB31_AF_UART4_RXD,
-#endif
-       /* SDHC1*/
-       PE18_PF_SD1_D0,
-       PE19_PF_SD1_D1,
-       PE20_PF_SD1_D2,
-       PE21_PF_SD1_D3,
-       PE22_PF_SD1_CMD,
-       PE23_PF_SD1_CLK,
-       /* display */
-       PA5_PF_LSCLK,
-       PA6_PF_LD0,
-       PA7_PF_LD1,
-       PA8_PF_LD2,
-       PA9_PF_LD3,
-       PA10_PF_LD4,
-       PA11_PF_LD5,
-       PA12_PF_LD6,
-       PA13_PF_LD7,
-       PA14_PF_LD8,
-       PA15_PF_LD9,
-       PA16_PF_LD10,
-       PA17_PF_LD11,
-       PA18_PF_LD12,
-       PA19_PF_LD13,
-       PA20_PF_LD14,
-       PA21_PF_LD15,
-       PA22_PF_LD16,
-       PA23_PF_LD17,
-       PA28_PF_HSYNC,
-       PA29_PF_VSYNC,
-       PA30_PF_CONTRAST,
-       PA31_PF_OE_ACD,
-       /* SPI1 */
-       PD29_PF_CSPI1_SCLK,
-       PD30_PF_CSPI1_MISO,
-       PD31_PF_CSPI1_MOSI,
-       /* SSI4 */
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-       || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-       PC16_PF_SSI4_FS,
-       PC17_PF_SSI4_RXD | GPIO_PUEN,
-       PC18_PF_SSI4_TXD | GPIO_PUEN,
-       PC19_PF_SSI4_CLK,
-#endif
-};
-
-static const uint32_t eukrea_mbimx27_keymap[] = {
-       KEY(0, 0, KEY_UP),
-       KEY(0, 1, KEY_DOWN),
-       KEY(1, 0, KEY_RIGHT),
-       KEY(1, 1, KEY_LEFT),
-};
-
-static const struct matrix_keymap_data
-eukrea_mbimx27_keymap_data __initconst = {
-       .keymap         = eukrea_mbimx27_keymap,
-       .keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
-};
-
-static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
-       {
-               .name                   = "led1",
-               .default_trigger        = "heartbeat",
-               .active_low             = 1,
-               .gpio                   = GPIO_PORTF | 16,
-       },
-       {
-               .name                   = "led2",
-               .default_trigger        = "none",
-               .active_low             = 1,
-               .gpio                   = GPIO_PORTF | 19,
-       },
-};
-
-static const struct gpio_led_platform_data
-               eukrea_mbimx27_gpio_led_info __initconst = {
-       .leds           = eukrea_mbimx27_gpio_leds,
-       .num_leds       = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-       {
-               .mode = {
-                       .name           = "CMO-QVGA",
-                       .refresh        = 60,
-                       .xres           = 320,
-                       .yres           = 240,
-                       .pixclock       = 156000,
-                       .hsync_len      = 30,
-                       .left_margin    = 38,
-                       .right_margin   = 20,
-                       .vsync_len      = 3,
-                       .upper_margin   = 15,
-                       .lower_margin   = 4,
-               },
-               .pcr            = 0xFAD08B80,
-               .bpp            = 16,
-       }, {
-               .mode = {
-                       .name           = "DVI-VGA",
-                       .refresh        = 60,
-                       .xres           = 640,
-                       .yres           = 480,
-                       .pixclock       = 32000,
-                       .hsync_len      = 1,
-                       .left_margin    = 35,
-                       .right_margin   = 0,
-                       .vsync_len      = 1,
-                       .upper_margin   = 7,
-                       .lower_margin   = 0,
-               },
-               .pcr            = 0xFA208B80,
-               .bpp            = 16,
-       }, {
-               .mode = {
-                       .name           = "DVI-SVGA",
-                       .refresh        = 60,
-                       .xres           = 800,
-                       .yres           = 600,
-                       .pixclock       = 25000,
-                       .hsync_len      = 1,
-                       .left_margin    = 35,
-                       .right_margin   = 0,
-                       .vsync_len      = 1,
-                       .upper_margin   = 7,
-                       .lower_margin   = 0,
-               },
-               .pcr            = 0xFA208B80,
-               .bpp            = 16,
-       },
-};
-
-static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
-       .mode = eukrea_mbimx27_modes,
-       .num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-       .pwmr           = 0x00A903FF,
-       .lscr1          = 0x00120300,
-       .dmacr          = 0x00040060,
-};
-
-static void eukrea_mbimx27_bl_set_intensity(int intensity)
-{
-       if (intensity)
-               gpio_direction_output(GPIO_PORTE | 5, 1);
-       else
-               gpio_direction_output(GPIO_PORTE | 5, 0);
-}
-
-static struct generic_bl_info eukrea_mbimx27_bl_info = {
-       .name                   = "eukrea_mbimx27-bl",
-       .max_intensity          = 0xff,
-       .default_intensity      = 0xff,
-       .set_bl_intensity       = eukrea_mbimx27_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimx27_bl_dev = {
-       .name                   = "generic-bl",
-       .id                     = 1,
-       .dev = {
-               .platform_data  = &eukrea_mbimx27_bl_info,
-       },
-};
-
-static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
-                                  unsigned int power)
-{
-       if (power)
-               gpio_direction_output(GPIO_PORTA | 25, 1);
-       else
-               gpio_direction_output(GPIO_PORTA | 25, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
-       .set_power              = eukrea_mbimx27_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimx27_lcd_powerdev = {
-       .name                   = "platform-lcd",
-       .dev.platform_data      = &eukrea_mbimx27_lcd_power_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-       .flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void __maybe_unused ads7846_dev_init(void)
-{
-       if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-               printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-               return;
-       }
-       gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-       return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-       .get_pendown_state      = ads7846_get_pendown_state,
-       .keep_vref_on           = 1,
-};
-
-static struct spi_board_info __maybe_unused
-               eukrea_mbimx27_spi_board_info[] __initdata = {
-       [0] = {
-               .modalias       = "ads7846",
-               .bus_num        = 0,
-               .chip_select    = 0,
-               .max_speed_hz   = 1500000,
-               /* irq number is run-time assigned */
-               .platform_data  = &ads7846_config,
-               .mode           = SPI_MODE_2,
-       },
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
-       .chipselect     = eukrea_mbimx27_spi_cs,
-       .num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-
-static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
-       {
-               I2C_BOARD_INFO("tlv320aic23", 0x1a),
-       },
-};
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-       .dat3_card_detect = 1,
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
-       .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-       mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-               ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-       imx27_add_imx_uart1(&uart_pdata);
-       imx27_add_imx_uart2(&uart_pdata);
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-       imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-       imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
-       imx27_add_mxc_mmc(0, &sdhc_pdata);
-
-       i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
-                               ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
-
-       imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-       || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-       /* ADS7846 Touchscreen controller init */
-       mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-       ads7846_dev_init();
-#endif
-
-       /* SPI_CS0 init */
-       mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-       imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
-       eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
-       spi_register_board_info(eukrea_mbimx27_spi_board_info,
-                       ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-
-       /* Leds configuration */
-       mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-       mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-       /* Backlight */
-       mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-       gpio_request(GPIO_PORTE | 5, "backlight");
-       platform_device_register(&eukrea_mbimx27_bl_dev);
-       /* LCD Reset */
-       mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
-       gpio_request(GPIO_PORTA | 25, "lcd_enable");
-       platform_device_register(&eukrea_mbimx27_lcd_powerdev);
-
-       imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
-
-       gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
-       imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
deleted file mode 100644 (file)
index e6d4b99..0000000
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int eukrea_cpuimx27_pins[] __initconst = {
-       /* UART1 */
-       PE12_PF_UART1_TXD,
-       PE13_PF_UART1_RXD,
-       PE14_PF_UART1_CTS,
-       PE15_PF_UART1_RTS,
-       /* UART4 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-       PB26_AF_UART4_RTS,
-       PB28_AF_UART4_TXD,
-       PB29_AF_UART4_CTS,
-       PB31_AF_UART4_RXD,
-#endif
-       /* FEC */
-       PD0_AIN_FEC_TXD0,
-       PD1_AIN_FEC_TXD1,
-       PD2_AIN_FEC_TXD2,
-       PD3_AIN_FEC_TXD3,
-       PD4_AOUT_FEC_RX_ER,
-       PD5_AOUT_FEC_RXD1,
-       PD6_AOUT_FEC_RXD2,
-       PD7_AOUT_FEC_RXD3,
-       PD8_AF_FEC_MDIO,
-       PD9_AIN_FEC_MDC,
-       PD10_AOUT_FEC_CRS,
-       PD11_AOUT_FEC_TX_CLK,
-       PD12_AOUT_FEC_RXD0,
-       PD13_AOUT_FEC_RX_DV,
-       PD14_AOUT_FEC_RX_CLK,
-       PD15_AOUT_FEC_COL,
-       PD16_AIN_FEC_TX_ER,
-       PF23_AIN_FEC_TX_EN,
-       /* I2C1 */
-       PD17_PF_I2C_DATA,
-       PD18_PF_I2C_CLK,
-       /* SDHC2 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-       PB4_PF_SD2_D0,
-       PB5_PF_SD2_D1,
-       PB6_PF_SD2_D2,
-       PB7_PF_SD2_D3,
-       PB8_PF_SD2_CMD,
-       PB9_PF_SD2_CLK,
-#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-       /* Quad UART's IRQ */
-       GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
-       GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
-       GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
-       GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-       /* OTG */
-       PC7_PF_USBOTG_DATA5,
-       PC8_PF_USBOTG_DATA6,
-       PC9_PF_USBOTG_DATA0,
-       PC10_PF_USBOTG_DATA2,
-       PC11_PF_USBOTG_DATA1,
-       PC12_PF_USBOTG_DATA4,
-       PC13_PF_USBOTG_DATA3,
-       PE0_PF_USBOTG_NXT,
-       PE1_PF_USBOTG_STP,
-       PE2_PF_USBOTG_DIR,
-       PE24_PF_USBOTG_CLK,
-       PE25_PF_USBOTG_DATA7,
-       /* USBH2 */
-       PA0_PF_USBH2_CLK,
-       PA1_PF_USBH2_DIR,
-       PA2_PF_USBH2_DATA7,
-       PA3_PF_USBH2_NXT,
-       PA4_PF_USBH2_STP,
-       PD19_AF_USBH2_DATA4,
-       PD20_AF_USBH2_DATA3,
-       PD21_AF_USBH2_DATA6,
-       PD22_AF_USBH2_DATA0,
-       PD23_AF_USBH2_DATA2,
-       PD24_AF_USBH2_DATA1,
-       PD26_AF_USBH2_DATA5,
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-       .width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-       .start = 0xc0000000,
-       .end   = 0xc3ffffff,
-       .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-       .name = "physmap-flash",
-       .id = 0,
-       .dev = {
-               .platform_data = &eukrea_cpuimx27_flash_data,
-       },
-       .num_resources = 1,
-       .resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-       .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-cpuimx27_nand_board_info __initconst = {
-       .width = 1,
-       .hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-       &eukrea_cpuimx27_nor_mtd_device,
-};
-
-static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
-       .bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-       {
-               I2C_BOARD_INFO("pcf8563", 0x51),
-       },
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-       {
-               .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-               /* irq number is run-time assigned */
-               .uartclk = 14745600,
-               .regshift = 1,
-               .iotype = UPIO_MEM,
-               .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-       }, {
-               .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-               /* irq number is run-time assigned */
-               .uartclk = 14745600,
-               .regshift = 1,
-               .iotype = UPIO_MEM,
-               .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-       }, {
-               .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-               /* irq number is run-time assigned */
-               .uartclk = 14745600,
-               .regshift = 1,
-               .iotype = UPIO_MEM,
-               .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-       }, {
-               .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-               /* irq number is run-time assigned */
-               .uartclk = 14745600,
-               .regshift = 1,
-               .iotype = UPIO_MEM,
-               .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-       }, {
-       }
-};
-
-static struct platform_device serial_device = {
-       .name = "serial8250",
-       .id = 0,
-       .dev = {
-               .platform_data = serial_platform_data,
-       },
-};
-#endif
-
-static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
-{
-       return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-       .init   = eukrea_cpuimx27_otg_init,
-       .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
-{
-       return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-       .init   = eukrea_cpuimx27_usbh2_init,
-       .portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-       .operating_mode = FSL_USB2_DR_DEVICE,
-       .phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx27_otg_mode(char *options)
-{
-       if (!strcmp(options, "host"))
-               otg_mode_host = true;
-       else if (!strcmp(options, "device"))
-               otg_mode_host = false;
-       else
-               pr_info("otg_mode neither \"host\" nor \"device\". "
-                       "Defaulting to device\n");
-       return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
-
-static void __init eukrea_cpuimx27_init(void)
-{
-       imx27_soc_init();
-
-       mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-               ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-       imx27_add_imx_uart0(&uart_pdata);
-
-       imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-
-       i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-                               ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-       imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
-
-       imx27_add_fec(NULL);
-       platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-       imx27_add_imx2_wdt();
-       imx27_add_mxc_w1();
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-       /* SDHC2 can be used for Wifi */
-       imx27_add_mxc_mmc(1, NULL);
-#endif
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-       /* in which case UART4 is also used for Bluetooth */
-       imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-       serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
-       serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
-       serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
-       serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
-       platform_device_register(&serial_device);
-#endif
-
-       if (otg_mode_host) {
-               otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-                               ULPI_OTG_DRVVBUS_EXT);
-               if (otg_pdata.otg)
-                       imx27_add_mxc_ehci_otg(&otg_pdata);
-       } else {
-               imx27_add_fsl_usb2_udc(&otg_device_pdata);
-       }
-
-       usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-                       ULPI_OTG_DRVVBUS_EXT);
-       if (usbh2_pdata.otg)
-               imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-       eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-       mx27_clocks_init(26000000);
-}
-
-MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-       .atag_offset = 0x100,
-       .map_io = mx27_map_io,
-       .init_early = imx27_init_early,
-       .init_irq = mx27_init_irq,
-       .init_time      = eukrea_cpuimx27_timer_init,
-       .init_machine = eukrea_cpuimx27_init,
-       .restart        = mxc_restart,
-MACHINE_END