ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver

Add DT node for the new cpsw switchdev based driver.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 3d393fe252c6b14d929829a41a7abe271350cad5..e702e95761152f7177f45d4454b2596c83963ea5 100644 (file)
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -571,6 +571,60 @@
                                        phys = <&phy_gmii_sel 2 0>;
                                };
                        };
+
+                       mac_sw: switch@0 {
+                               compatible = "ti,am4372-cpsw","ti,cpsw-switch";
+                               reg = <0x0 0x4000>;
+                               ranges = <0 0 0x4000>;
+                               clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
+                               clock-names = "fck", "50mclk";
+                               assigned-clocks = <&dpll_clksel_mac_clk>;
+                               assigned-clock-rates = <50000000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               syscon = <&scm_conf>;
+                               status = "disabled";
+
+                               interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+                                             GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+                                             GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+                                             GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+                               ethernet-ports {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       cpsw_port1: port@1 {
+                                               reg = <1>;
+                                               label = "port1";
+                                               mac-address = [ 00 00 00 00 00 00 ];
+                                               phys = <&phy_gmii_sel 1 0>;
+                                       };
+
+                                       cpsw_port2: port@2 {
+                                               reg = <2>;
+                                               label = "port2";
+                                               mac-address = [ 00 00 00 00 00 00 ];
+                                               phys = <&phy_gmii_sel 2 0>;
+                                       };
+                               };
+
+                               davinci_mdio_sw: mdio@1000 {
+                                       compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
+                                       clocks = <&cpsw_125mhz_gclk>;
+                                       clock-names = "fck";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       bus_freq = <1000000>;
+                                       reg = <0x1000 0x100>;
+                               };
+
+                               cpts {
+                                       clocks = <&cpsw_cpts_rft_clk>;
+                                       clock-names = "cpts";
+                               };
+                       };
                };
 
                target-module@200000 {                  /* 0x4a200000, ap 7 02.0 */