mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0
authorJohannes Thumshirn <johannes.thumshirn@men.de>
Tue, 16 Dec 2014 09:09:20 +0000 (10:09 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 9 Jan 2015 23:46:37 +0000 (15:46 -0800)
Currently it is not possible to have a kernel with built-in MCB attached
devices. This results out of the fact that mcb-pci requests PCI BAR 0, then
parses the chameleon table and calls the driver's probe function before
releasing BAR 0 again. When building the kernel with modules this is not a
problem (and therefore it wasn't detected by my tests yet).

A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device.
0x200 bytes is the maximum size of a Chameleon v2 Table.

Also this patch stops disabling the PCI device on successful registration of MCB
devices.

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/mcb/mcb-internal.h
drivers/mcb/mcb-pci.c

index f956ef26c0ce2ddc1f81014b8ab5e0b658eb9977..fb7493dcfb79f409a8f483480f1c8d50bdba2278 100644 (file)
@@ -7,6 +7,7 @@
 #define PCI_DEVICE_ID_MEN_CHAMELEON    0x4d45
 #define CHAMELEON_FILENAME_LEN         12
 #define CHAMELEONV2_MAGIC              0xabce
+#define CHAM_HEADER_SIZE               0x200
 
 enum chameleon_descriptor_type {
        CHAMELEON_DTYPE_GENERAL = 0x0,
index b5918196564376b028e825ccc75131ae74b1cdd0..5e1bd5db02c8ee7f21e0de9b778d2d1bb17a2d6c 100644 (file)
@@ -17,6 +17,7 @@
 
 struct priv {
        struct mcb_bus *bus;
+       phys_addr_t mapbase;
        void __iomem *base;
 };
 
@@ -31,8 +32,8 @@ static int mcb_pci_get_irq(struct mcb_device *mdev)
 
 static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+       struct resource *res;
        struct priv *priv;
-       phys_addr_t mapbase;
        int ret;
        int num_cells;
        unsigned long flags;
@@ -47,19 +48,21 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
                return -ENODEV;
        }
 
-       mapbase = pci_resource_start(pdev, 0);
-       if (!mapbase) {
+       priv->mapbase = pci_resource_start(pdev, 0);
+       if (!priv->mapbase) {
                dev_err(&pdev->dev, "No PCI resource\n");
                goto err_start;
        }
 
-       ret = pci_request_region(pdev, 0, KBUILD_MODNAME);
-       if (ret) {
-               dev_err(&pdev->dev, "Failed to request PCI BARs\n");
+       res = request_mem_region(priv->mapbase, CHAM_HEADER_SIZE,
+                                KBUILD_MODNAME);
+       if (IS_ERR(res)) {
+               dev_err(&pdev->dev, "Failed to request PCI memory\n");
+               ret = PTR_ERR(res);
                goto err_start;
        }
 
-       priv->base = pci_iomap(pdev, 0, 0);
+       priv->base = ioremap(priv->mapbase, CHAM_HEADER_SIZE);
        if (!priv->base) {
                dev_err(&pdev->dev, "Cannot ioremap\n");
                ret = -ENOMEM;
@@ -84,7 +87,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
        priv->bus->get_irq = mcb_pci_get_irq;
 
-       ret = chameleon_parse_cells(priv->bus, mapbase, priv->base);
+       ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base);
        if (ret < 0)
                goto err_drvdata;
        num_cells = ret;
@@ -93,8 +96,10 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
        mcb_bus_add_devices(priv->bus);
 
+       return 0;
+
 err_drvdata:
-       pci_iounmap(pdev, priv->base);
+       iounmap(priv->base);
 err_ioremap:
        pci_release_region(pdev, 0);
 err_start:
@@ -107,6 +112,10 @@ static void mcb_pci_remove(struct pci_dev *pdev)
        struct priv *priv = pci_get_drvdata(pdev);
 
        mcb_release_bus(priv->bus);
+
+       iounmap(priv->base);
+       release_region(priv->mapbase, CHAM_HEADER_SIZE);
+       pci_disable_device(pdev);
 }
 
 static const struct pci_device_id mcb_pci_tbl[] = {