omap: zoom2: wlan board muxing
authorOhad Ben-Cohen <ohadb@ti.com>
Mon, 2 Aug 2010 10:18:00 +0000 (13:18 +0300)
committerTony Lindgren <tony@atomide.com>
Mon, 2 Aug 2010 10:18:00 +0000 (13:18 +0300)
Add board muxing to support the wlan wl1271 chip that is
hardwired to mmc2 (third mmc controller) on the ZOOM2.

Signed-off-by: Ohad Ben-Cohen <ohadb@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-zoom2.c

index 803ef14cbf2d64ca3218e56ce4e48572088fe67f..1520a2c141490bd48ea57f8463a9312a12fbac4f 100644 (file)
@@ -71,6 +71,19 @@ static struct twl4030_platform_data zoom2_twldata = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+       /* WLAN IRQ - GPIO 162 */
+       OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+       /* WLAN POWER ENABLE - GPIO 101 */
+       OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+       /* WLAN SDIO: MMC3 CMD */
+       OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+       /* WLAN SDIO: MMC3 CLK */
+       OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+       /* WLAN SDIO: MMC3 DAT[0-3] */
+       OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+       OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+       OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+       OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
        { .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #else