[SCSI] 3w-9xxx: add power management support
authoradam radford <aradford@gmail.com>
Mon, 9 Mar 2009 20:15:01 +0000 (12:15 -0800)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Fri, 13 Mar 2009 20:46:42 +0000 (15:46 -0500)
Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/3w-9xxx.c
drivers/scsi/3w-9xxx.h

index 5311317c2e4cafd10d1382f93b41ed3f6a9baf08..a12783ebb42d39a829c0a3d1c24c5c87222af302 100644 (file)
@@ -4,7 +4,7 @@
    Written By: Adam Radford <linuxraid@amcc.com>
    Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2009 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -75,6 +75,7 @@
                  Add MSI support and "use_msi" module parameter.
                  Fix bug in twa_get_param() on 4GB+.
                  Use pci_resource_len() for ioremap().
+   2.26.02.012 - Add power management support.
 */
 
 #include <linux/module.h>
 #include "3w-9xxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "2.26.02.011"
+#define TW_DRIVER_VERSION "2.26.02.012"
 static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
 static unsigned int twa_device_extension_count;
 static int twa_major = -1;
@@ -2182,6 +2183,98 @@ static void twa_remove(struct pci_dev *pdev)
        twa_device_extension_count--;
 } /* End twa_remove() */
 
+#ifdef CONFIG_PM
+/* This function is called on PCI suspend */
+static int twa_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       struct Scsi_Host *host = pci_get_drvdata(pdev);
+       TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
+
+       printk(KERN_WARNING "3w-9xxx: Suspending host %d.\n", tw_dev->host->host_no);
+
+       TW_DISABLE_INTERRUPTS(tw_dev);
+       free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
+       if (test_bit(TW_USING_MSI, &tw_dev->flags))
+               pci_disable_msi(pdev);
+
+       /* Tell the card we are shutting down */
+       if (twa_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
+               TW_PRINTK(tw_dev->host, TW_DRIVER, 0x38, "Connection shutdown failed during suspend");
+       } else {
+               printk(KERN_WARNING "3w-9xxx: Suspend complete.\n");
+       }
+       TW_CLEAR_ALL_INTERRUPTS(tw_dev);
+
+       pci_save_state(pdev);
+       pci_disable_device(pdev);
+       pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+       return 0;
+} /* End twa_suspend() */
+
+/* This function is called on PCI resume */
+static int twa_resume(struct pci_dev *pdev)
+{
+       int retval = 0;
+       struct Scsi_Host *host = pci_get_drvdata(pdev);
+       TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
+
+       printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no);
+       pci_set_power_state(pdev, PCI_D0);
+       pci_enable_wake(pdev, PCI_D0, 0);
+       pci_restore_state(pdev);
+
+       retval = pci_enable_device(pdev);
+       if (retval) {
+               TW_PRINTK(tw_dev->host, TW_DRIVER, 0x39, "Enable device failed during resume");
+               return retval;
+       }
+
+       pci_set_master(pdev);
+       pci_try_set_mwi(pdev);
+
+       if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
+           || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+               if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
+                   || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+                       TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
+                       retval = -ENODEV;
+                       goto out_disable_device;
+               }
+
+       /* Initialize the card */
+       if (twa_reset_sequence(tw_dev, 0)) {
+               retval = -ENODEV;
+               goto out_disable_device;
+       }
+
+       /* Now setup the interrupt handler */
+       retval = request_irq(pdev->irq, twa_interrupt, IRQF_SHARED, "3w-9xxx", tw_dev);
+       if (retval) {
+               TW_PRINTK(tw_dev->host, TW_DRIVER, 0x42, "Error requesting IRQ during resume");
+               retval = -ENODEV;
+               goto out_disable_device;
+       }
+
+       /* Now enable MSI if enabled */
+       if (test_bit(TW_USING_MSI, &tw_dev->flags))
+               pci_enable_msi(pdev);
+
+       /* Re-enable interrupts on the card */
+       TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+
+       printk(KERN_WARNING "3w-9xxx: Resume complete.\n");
+       return 0;
+
+out_disable_device:
+       scsi_remove_host(host);
+       pci_disable_device(pdev);
+
+       return retval;
+} /* End twa_resume() */
+#endif
+
 /* PCI Devices supported by this driver */
 static struct pci_device_id twa_pci_tbl[] __devinitdata = {
        { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9000,
@@ -2202,6 +2295,10 @@ static struct pci_driver twa_driver = {
        .id_table       = twa_pci_tbl,
        .probe          = twa_probe,
        .remove         = twa_remove,
+#ifdef CONFIG_PM
+       .suspend        = twa_suspend,
+       .resume         = twa_resume,
+#endif
        .shutdown       = twa_shutdown
 };
 
index 1729a8785fea197c0e1ae16f962952372dc0b5cf..2893eec78ed2237b87ce4f296223115793522a40 100644 (file)
@@ -4,7 +4,7 @@
    Written By: Adam Radford <linuxraid@amcc.com>
    Modifications By: Tom Couch <linuxraid@amcc.com>
 
-   Copyright (C) 2004-2008 Applied Micro Circuits Corporation.
+   Copyright (C) 2004-2009 Applied Micro Circuits Corporation.
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by