ARM: dts: imx6q-apalis: mux RESET_MOCI# signal

The pinctrl properties on the IOMUXC node get overwritten by the
carrier board level device tree, hence the pinctrl_reset_moci
pinctrl does not get applied.

Associate the pinctrl_reset_moci pinctrl with the PCIe node where
we also make use of the pin as a reset GPIO.

Since the pin is muxed as a GPIO by default not muxing it explicitly
worked fine in practise.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
index 707ac9a46115f02bd6307413a1bbd7935a7d7799..0edd3043d9c1e1e06bf45152d31d5cba5f62dc79 100644 (file)
--- a/arch/arm/boot/dts/imx6q-apalis-eval.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -196,6 +196,8 @@
 };
 
 &pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_reset_moci>;
        /* active-high meaning opposite of regular PERST# active-low polarity */
        reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
        reset-gpio-active-high;

diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
index 4e1c8feaef82207805d102d0aa724db06ae4e39e..b94bb687be6b31b4f5af88f168b618b6d798cef6 100644 (file)
--- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -196,6 +196,8 @@
 };
 
 &pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_reset_moci>;
        /* active-high meaning opposite of regular PERST# active-low polarity */
        reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
        reset-gpio-active-high;

diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
index 469e3d0e28276e78c26a000ae3f9cda004706bd1..302fd6adc8a7d63fc318c1a9ebb1cc87aa4817ba 100644 (file)
--- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -200,6 +200,8 @@
 };
 
 &pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_reset_moci>;
        /* active-high meaning opposite of regular PERST# active-low polarity */
        reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
        reset-gpio-active-high;

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 05f07ea3e8c8051338dfec9db3977e095ae19431..3dc99dd8dde178e612546490ef24b6b613a5fc83 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -482,10 +482,6 @@
 };
 
 &iomuxc {
-       /* pins used on module */
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_reset_moci>;
-
        pinctrl_apalis_gpio1: gpio2io04grp {
                fsl,pins = <
                        MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0