arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6

vcc3v3-sd-s0-regulator used enable-active-low. According the binding
of the fixed regulator, that is the assumed mode of operation if
enable-active-high is not specified. So this is property is not part
of the binding, therefore remove it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240829132100.1723127-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 94a1c83a322de09590eab5912006df8d83b50a63..d035a44e5b201c57919691067d1031e5ff585a89 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -186,7 +186,6 @@
 
        vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
                compatible = "regulator-fixed";
-               enable-active-low;
                gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
                regulator-boot-on;
                regulator-max-microvolt = <3300000>;