dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema

Convert to json-schema for the AST2600 FSI master documentation.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240522192524.3286237-9-eajames@linux.ibm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

diff --git a/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
new file mode 100644 (file)
index 0000000..2f531c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed FSI master
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description:
+  The AST2600 and later contain two identical FSI masters. They share a
+  clock and have a separate interrupt line and output pins.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-fsi-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  cfam-reset-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for CFAM reset
+
+  fsi-routing-gpios:
+    maxItems: 1
+    description:
+      Output GPIO pin for setting the FSI mux (internal or cabled)
+
+  fsi-mux-gpios:
+    maxItems: 1
+    description:
+      Input GPIO pin for detecting the desired FSI mux state
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+allOf:
+  - $ref: fsi-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    #include <dt-bindings/gpio/aspeed-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fsi-master@1e79b000 {
+        compatible = "aspeed,ast2600-fsi-master";
+        reg = <0x1e79b000 0x94>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_fsi1_default>;
+        clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+        fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+        fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+        cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+
+        cfam@0,0 {
+            reg = <0 0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            chip-id = <0>;
+        };
+    };

diff --git a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt b/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
deleted file mode 100644 (file)
index 9853fef..0000000
--- a/Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-Device-tree bindings for AST2600 FSI master
--------------------------------------------
-
-The AST2600 contains two identical FSI masters. They share a clock and have a
-separate interrupt line and output pins.
-
-Required properties:
- - compatible: "aspeed,ast2600-fsi-master"
- - reg: base address and length
- - clocks: phandle and clock number
- - interrupts: platform dependent interrupt description
- - pinctrl-0: phandle to pinctrl node
- - pinctrl-names: pinctrl state
-
-Optional properties:
- - cfam-reset-gpios: GPIO for CFAM reset
-
- - fsi-routing-gpios: GPIO for setting the FSI mux (internal or cabled)
- - fsi-mux-gpios: GPIO for detecting the desired FSI mux state
-
-
-Examples:
-
-    fsi-master {
-        compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-        reg = <0x1e79b000 0x94>;
-       interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_fsi1_default>;
-       clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-
-       fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
-       fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-
-       cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
-    };