[media] s5p-mfc: modify mfc wakeup sequence for V8
authorArun Mankuzhi <arun.m@samsung.com>
Tue, 21 Oct 2014 11:07:02 +0000 (08:07 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Tue, 28 Oct 2014 17:50:34 +0000 (15:50 -0200)
MFC wakeup command has to be sent after the host receives
firmware load complete status from risc.

Signed-off-by: Arun Mankuzhi <arun.m@samsung.com>
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c

index fbffb102ef78710dc34835047d526387ff707265..6308150e638f7b006c169e59ca39141781e7ce71 100644 (file)
@@ -353,6 +353,58 @@ int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
        return ret;
 }
 
+static int s5p_mfc_v8_wait_wakeup(struct s5p_mfc_dev *dev)
+{
+       int ret;
+
+       /* Release reset signal to the RISC */
+       dev->risc_on = 1;
+       mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+
+       if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_FW_STATUS_RET)) {
+               mfc_err("Failed to reset MFCV8\n");
+               return -EIO;
+       }
+       mfc_debug(2, "Write command to wakeup MFCV8\n");
+       ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
+       if (ret) {
+               mfc_err("Failed to send command to MFCV8 - timeout\n");
+               return ret;
+       }
+
+       if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
+               mfc_err("Failed to wakeup MFC\n");
+               return -EIO;
+       }
+       return ret;
+}
+
+static int s5p_mfc_wait_wakeup(struct s5p_mfc_dev *dev)
+{
+       int ret;
+
+       /* Send MFC wakeup command */
+       ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
+       if (ret) {
+               mfc_err("Failed to send command to MFC - timeout\n");
+               return ret;
+       }
+
+       /* Release reset signal to the RISC */
+       if (IS_MFCV6_PLUS(dev)) {
+               dev->risc_on = 1;
+               mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
+       } else {
+               mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
+       }
+
+       if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
+               mfc_err("Failed to wakeup MFC\n");
+               return -EIO;
+       }
+       return ret;
+}
+
 int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
 {
        int ret;
@@ -365,6 +417,7 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
        ret = s5p_mfc_reset(dev);
        if (ret) {
                mfc_err("Failed to reset MFC - timeout\n");
+               s5p_mfc_clock_off();
                return ret;
        }
        mfc_debug(2, "Done MFC reset..\n");
@@ -373,25 +426,16 @@ int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
        /* 2. Initialize registers of channel I/F */
        s5p_mfc_clear_cmds(dev);
        s5p_mfc_clean_dev_int_flags(dev);
-       /* 3. Initialize firmware */
-       ret = s5p_mfc_hw_call(dev->mfc_cmds, wakeup_cmd, dev);
-       if (ret) {
-               mfc_err("Failed to send command to MFC - timeout\n");
-               return ret;
-       }
-       /* 4. Release reset signal to the RISC */
-       if (IS_MFCV6_PLUS(dev)) {
-               dev->risc_on = 1;
-               mfc_write(dev, 0x1, S5P_FIMV_RISC_ON_V6);
-       }
+       /* 3. Send MFC wakeup command and wait for completion*/
+       if (IS_MFCV8(dev))
+               ret = s5p_mfc_v8_wait_wakeup(dev);
        else
-               mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
-       mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
-       if (s5p_mfc_wait_for_done_dev(dev, S5P_MFC_R2H_CMD_WAKEUP_RET)) {
-               mfc_err("Failed to load firmware\n");
-               return -EIO;
-       }
+               ret = s5p_mfc_wait_wakeup(dev);
+
        s5p_mfc_clock_off();
+       if (ret)
+               return ret;
+
        dev->int_cond = 0;
        if (dev->int_err != 0 || dev->int_type !=
                                                S5P_MFC_R2H_CMD_WAKEUP_RET) {