require specific display timings. The panel-timing subnode expresses those
timings as specified in the timing subnode section of the display timing
bindings defined in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
Connectivity
- "renesas,dmac-r8a7794" (R-Car E2)
- "renesas,dmac-r8a7795" (R-Car H3)
- "renesas,dmac-r8a7796" (R-Car M3-W)
+ - "renesas,dmac-r8a77965" (R-Car M3-N)
- "renesas,dmac-r8a77970" (R-Car V3M)
- "renesas,dmac-r8a77980" (R-Car V3H)
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+ - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
- "renesas,etheravb-r8a77970" for the R8A77970 SoC.
- "renesas,etheravb-r8a77980" for the R8A77980 SoC.
- "renesas,etheravb-r8a77995" for the R8A77995 SoC.
configuration, drive strength and pullups. If one of these options is
not set, its actual value will be unspecified.
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
Required sub-node properties:
- pins
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
- "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+ - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
+ - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
- "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
- "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
- "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.
keithkoep Keith & Koep GmbH
keymile Keymile GmbH
khadas Khadas
+kiebackpeter Kieback & Peter GmbH
kinetic Kinetic Technologies
kingnovel Kingnovel Technology Co., Ltd.
kosagi Sutajio Ko-Usagi PTE Ltd.
of_overlay_remove_all() which will remove every single one in the correct
order.
+In addition, there is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+Note that a notifier callback is not supposed to store pointers to a device
+tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
+respective node it received.
+
Overlay DTS Format
------------------
static BLOCKING_NOTIFIER_HEAD(overlay_notify_chain);
+/**
+ * of_overlay_notifier_register() - Register notifier for overlay operations
+ * @nb: Notifier block to register
+ *
+ * Register for notification on overlay operations on device tree nodes. The
+ * reported actions definied by @of_reconfig_change. The notifier callback
+ * furthermore receives a pointer to the affected device tree node.
+ *
+ * Note that a notifier callback is not supposed to store pointers to a device
+ * tree node or its content beyond @OF_OVERLAY_POST_REMOVE corresponding to the
+ * respective node it received.
+ */
int of_overlay_notifier_register(struct notifier_block *nb)
{
return blocking_notifier_chain_register(&overlay_notify_chain, nb);
}
EXPORT_SYMBOL_GPL(of_overlay_notifier_register);
+/**
+ * of_overlay_notifier_register() - Unregister notifier for overlay operations
+ * @nb: Notifier block to unregister
+ */
int of_overlay_notifier_unregister(struct notifier_block *nb)
{
return blocking_notifier_chain_unregister(&overlay_notify_chain, nb);
of_node_put(ovcs->fragments[i].overlay);
}
kfree(ovcs->fragments);
-
/*
- * TODO
- *
- * would like to: kfree(ovcs->overlay_tree);
- * but can not since drivers may have pointers into this data
- *
- * would like to: kfree(ovcs->fdt);
- * but can not since drivers may have pointers into this data
+ * There should be no live pointers into ovcs->overlay_tree and
+ * ovcs->fdt due to the policy that overlay notifiers are not allowed
+ * to retain pointers into the overlay devicetree.
*/
-
+ kfree(ovcs->overlay_tree);
+ kfree(ovcs->fdt);
kfree(ovcs);
}
FAIL(c, dti, node, "incorrect #size-cells for PCI bridge");
prop = get_property(node, "bus-range");
- if (!prop) {
- FAIL(c, dti, node, "missing bus-range for PCI bridge");
+ if (!prop)
return;
- }
+
if (prop->val.len != (sizeof(cell_t) * 2)) {
FAIL_PROP(c, dti, node, prop, "value must be 2 cells");
return;