dt-bindings: serial: Convert microchip,pic32mzda-uart to DT schema

Convert the Microchip PIC32 UART binding to DT schema. The binding was
unclear there are 3 interrupts. The functions were determined from the
driver. The 'cts-gpios' property is covered by serial.yaml schema.

Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507154937.1603190-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
deleted file mode 100644 (file)
index c8dd440..0000000
--- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Microchip Universal Asynchronous Receiver Transmitter (UART)
-
-Required properties:
-- compatible: Should be "microchip,pic32mzda-uart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clocks: Phandle to the clock.
-          See: Documentation/devicetree/bindings/clock/clock-bindings.txt
-- pinctrl-names: A pinctrl state names "default" must be defined.
-- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
-             See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Optional properties:
-- cts-gpios: CTS pin for UART
-
-Example:
-       uart1: serial@1f822000 {
-               compatible = "microchip,pic32mzda-uart";
-               reg = <0x1f822000 0x50>;
-               interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
-                       <113 IRQ_TYPE_LEVEL_HIGH>,
-                       <114 IRQ_TYPE_LEVEL_HIGH>;
-               clocks = <&rootclk PB2CLK>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_uart1
-                               &pinctrl_uart1_cts
-                               &pinctrl_uart1_rts>;
-               cts-gpios = <&gpio1 15 0>;
-       };

diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32mzda-uart.yaml b/Documentation/devicetree/bindings/serial/microchip,pic32mzda-uart.yaml
new file mode 100644 (file)
index 0000000..b176fd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32mzda-uart.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/microchip,pic32mzda-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PIC32 UART
+
+maintainers:
+  - Andrei Pistirica <andrei.pistirica@microchip.com>
+  - Purna Chandra Mandal <purna.mandal@microchip.com>
+
+allOf:
+  - $ref: /schemas/serial/serial.yaml#
+
+properties:
+  compatible:
+    const: microchip,pic32mzda-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Fault
+      - description: RX
+      - description: TX
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/microchip,pic32-clock.h>
+
+    serial@1f822000 {
+        compatible = "microchip,pic32mzda-uart";
+        reg = <0x1f822000 0x50>;
+        interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+                    <113 IRQ_TYPE_LEVEL_HIGH>,
+                    <114 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rootclk PB2CLK>;
+        cts-gpios = <&gpio1 15 0>;
+    };