spi: octeon: Add ThunderX driver
authorJan Glauber <jglauber@cavium.com>
Fri, 19 Aug 2016 14:03:20 +0000 (16:03 +0200)
committerMark Brown <broonie@kernel.org>
Fri, 19 Aug 2016 15:24:39 +0000 (16:24 +0100)
Add ThunderX SPI driver using the shared part from the Octeon
driver. The main difference of the ThunderX driver is that it
is a PCI device so probing is different. The system clock settings
can be specified in device tree.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/spi/Kconfig
drivers/spi/Makefile
drivers/spi/spi-cavium-thunderx.c [new file with mode: 0644]
drivers/spi/spi-cavium.h

index d6fb8d4b778672fd006446c0eab710d35f6e6e3a..8108971af601a8015e80f5625a679e1a69e62e3d 100644 (file)
@@ -631,6 +631,13 @@ config SPI_TEGRA20_SLINK
        help
          SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
 
+config SPI_THUNDERX
+       tristate "Cavium ThunderX SPI controller"
+       depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
+       help
+         SPI host driver for the hardware found on Cavium ThunderX
+         SOCs.
+
 config SPI_TOPCLIFF_PCH
        tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
        depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
index 185367ef65761a742ac2f9e8eea75954faf92524..133364b069e69bc91ce6e6fb4f143afb75d1c3af 100644 (file)
@@ -91,6 +91,8 @@ obj-$(CONFIG_SPI_TEGRA114)            += spi-tegra114.o
 obj-$(CONFIG_SPI_TEGRA20_SFLASH)       += spi-tegra20-sflash.o
 obj-$(CONFIG_SPI_TEGRA20_SLINK)                += spi-tegra20-slink.o
 obj-$(CONFIG_SPI_TLE62X0)              += spi-tle62x0.o
+spi-thunderx-objs                      := spi-cavium.o spi-cavium-thunderx.o
+obj-$(CONFIG_SPI_THUNDERX)             += spi-thunderx.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)         += spi-topcliff-pch.o
 obj-$(CONFIG_SPI_TXX9)                 += spi-txx9.o
 obj-$(CONFIG_SPI_XCOMM)                += spi-xcomm.o
diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c
new file mode 100644 (file)
index 0000000..eff2a13
--- /dev/null
@@ -0,0 +1,118 @@
+/*
+ * Cavium ThunderX SPI driver.
+ *
+ * Copyright (C) 2016 Cavium Inc.
+ * Authors: Jan Glauber <jglauber@cavium.com>
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+
+#include "spi-cavium.h"
+
+#define DRV_NAME "spi-thunderx"
+
+#define SYS_FREQ_DEFAULT 700000000 /* 700 Mhz */
+
+static int thunderx_spi_probe(struct pci_dev *pdev,
+                             const struct pci_device_id *ent)
+{
+       struct device *dev = &pdev->dev;
+       struct spi_master *master;
+       struct octeon_spi *p;
+       int ret;
+
+       master = spi_alloc_master(dev, sizeof(struct octeon_spi));
+       if (!master)
+               return -ENOMEM;
+
+       p = spi_master_get_devdata(master);
+
+       ret = pcim_enable_device(pdev);
+       if (ret)
+               goto error;
+
+       ret = pci_request_regions(pdev, DRV_NAME);
+       if (ret)
+               goto error;
+
+       p->register_base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0));
+       if (!p->register_base) {
+               ret = -EINVAL;
+               goto error;
+       }
+
+       p->regs.config = 0x1000;
+       p->regs.status = 0x1008;
+       p->regs.tx = 0x1010;
+       p->regs.data = 0x1080;
+
+       p->clk = devm_clk_get(dev, NULL);
+       if (IS_ERR(p->clk)) {
+               ret = PTR_ERR(p->clk);
+               goto error;
+       }
+
+       ret = clk_prepare_enable(p->clk);
+       if (ret)
+               goto error;
+
+       p->sys_freq = clk_get_rate(p->clk);
+       if (!p->sys_freq)
+               p->sys_freq = SYS_FREQ_DEFAULT;
+       dev_info(dev, "Set system clock to %u\n", p->sys_freq);
+
+       master->num_chipselect = 4;
+       master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH |
+                           SPI_LSB_FIRST | SPI_3WIRE;
+       master->transfer_one_message = octeon_spi_transfer_one_message;
+       master->bits_per_word_mask = SPI_BPW_MASK(8);
+       master->max_speed_hz = OCTEON_SPI_MAX_CLOCK_HZ;
+       master->dev.of_node = pdev->dev.of_node;
+
+       pci_set_drvdata(pdev, master);
+
+       ret = devm_spi_register_master(dev, master);
+       if (ret)
+               goto error;
+
+       return 0;
+
+error:
+       spi_master_put(master);
+       return ret;
+}
+
+static void thunderx_spi_remove(struct pci_dev *pdev)
+{
+       struct spi_master *master = pci_get_drvdata(pdev);
+       struct octeon_spi *p;
+
+       p = spi_master_get_devdata(master);
+       if (!p)
+               return;
+
+       /* Put everything in a known state. */
+       writeq(0, p->register_base + OCTEON_SPI_CFG(p));
+}
+
+static const struct pci_device_id thunderx_spi_pci_id_table[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xa00b) },
+       { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, thunderx_spi_pci_id_table);
+
+static struct pci_driver thunderx_spi_driver = {
+       .name           = DRV_NAME,
+       .id_table       = thunderx_spi_pci_id_table,
+       .probe          = thunderx_spi_probe,
+       .remove         = thunderx_spi_remove,
+};
+
+module_pci_driver(thunderx_spi_driver);
+
+MODULE_DESCRIPTION("Cavium, Inc. ThunderX SPI bus driver");
+MODULE_AUTHOR("Jan Glauber");
+MODULE_LICENSE("GPL");
index 88c5f36e7ea756f4e8a9d7cc03022cc3cdc146db..1f91d61b745b75a91dbb81ec1f3463bc6b932ce4 100644 (file)
@@ -1,6 +1,8 @@
 #ifndef __SPI_CAVIUM_H
 #define __SPI_CAVIUM_H
 
+#include <linux/clk.h>
+
 #define OCTEON_SPI_MAX_BYTES 9
 #define OCTEON_SPI_MAX_CLOCK_HZ 16000000
 
@@ -17,6 +19,7 @@ struct octeon_spi {
        u64 cs_enax;
        int sys_freq;
        struct octeon_spi_regs regs;
+       struct clk *clk;
 };
 
 #define OCTEON_SPI_CFG(x)      (x->regs.config)