net: phy: Allow BCM5481x PHYs to setup internal TX/RX clock delay
authorAbhishek Shah <abhishek.shah@broadcom.com>
Sun, 30 Apr 2017 05:34:21 +0000 (11:04 +0530)
committerDavid S. Miller <davem@davemloft.net>
Mon, 1 May 2017 02:56:19 +0000 (22:56 -0400)
This patch allows users to enable/disable internal TX and/or RX
clock delay for BCM5481x series PHYs so as to satisfy RGMII timing
specifications.

On a particular platform, whether TX and/or RX clock delay is required
depends on how PHY connected to the MAC IP. This requirement can be
specified through "phy-mode" property in the platform device tree.

Signed-off-by: Abhishek Shah <abhishek.shah@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/broadcom.c

index 9cd8b27d12923c78b6f68bb1bf7e2afe993b30a6..a32dc5d11e8956ebd66646420ed6915985b45491 100644 (file)
@@ -74,27 +74,40 @@ static int bcm54612e_config_init(struct phy_device *phydev)
        return 0;
 }
 
-static int bcm54810_config(struct phy_device *phydev)
+static int bcm5481x_config(struct phy_device *phydev)
 {
        int rc, val;
 
-       val = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
-       val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
-       rc = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
-                              val);
-       if (rc < 0)
-               return rc;
-
+       /* handling PHY's internal RX clock delay */
        val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC);
-       val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
        val |= MII_BCM54XX_AUXCTL_MISC_WREN;
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+               /* Disable RGMII RXC-RXD skew */
+               val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+       }
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+               /* Enable RGMII RXC-RXD skew */
+               val |= MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN;
+       }
        rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC,
                                  val);
        if (rc < 0)
                return rc;
 
+       /* handling PHY's internal TX clock delay */
        val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL);
-       val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+               /* Disable internal TX clock delay */
+               val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+       }
+       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+           phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
+               /* Enable internal TX clock delay */
+               val |= BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+       }
        rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
        if (rc < 0)
                return rc;
@@ -244,7 +257,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
 
 static int bcm54xx_config_init(struct phy_device *phydev)
 {
-       int reg, err;
+       int reg, err, val;
 
        reg = phy_read(phydev, MII_BCM54XX_ECR);
        if (reg < 0)
@@ -283,8 +296,14 @@ static int bcm54xx_config_init(struct phy_device *phydev)
                if (err)
                        return err;
        } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) {
-               err = bcm54810_config(phydev);
-               if (err)
+               /* For BCM54810, we need to disable BroadR-Reach function */
+               val = bcm_phy_read_exp(phydev,
+                                      BCM54810_EXP_BROADREACH_LRE_MISC_CTL);
+               val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN;
+               err = bcm_phy_write_exp(phydev,
+                                       BCM54810_EXP_BROADREACH_LRE_MISC_CTL,
+                                       val);
+               if (err < 0)
                        return err;
        }
 
@@ -392,29 +411,7 @@ static int bcm5481_config_aneg(struct phy_device *phydev)
        ret = genphy_config_aneg(phydev);
 
        /* Then we can set up the delay. */
-       if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
-               u16 reg;
-
-               /*
-                * There is no BCM5481 specification available, so down
-                * here is everything we know about "register 0x18". This
-                * at least helps BCM5481 to successfully receive packets
-                * on MPC8360E-RDK board. Peter Barada <peterb@logicpd.com>
-                * says: "This sets delay between the RXD and RXC signals
-                * instead of using trace lengths to achieve timing".
-                */
-
-               /* Set RDX clk delay. */
-               reg = 0x7 | (0x7 << 12);
-               phy_write(phydev, 0x18, reg);
-
-               reg = phy_read(phydev, 0x18);
-               /* Set RDX-RXC skew. */
-               reg |= (1 << 8);
-               /* Write bits 14:0. */
-               reg |= (1 << 15);
-               phy_write(phydev, 0x18, reg);
-       }
+       bcm5481x_config(phydev);
 
        if (of_property_read_bool(np, "enet-phy-lane-swap")) {
                /* Lane Swap - Undocumented register...magic! */