mmc: bfin_sdh: set timeout based on actual card data
authorCliff Cai <cliff.cai@analog.com>
Fri, 5 Mar 2010 21:43:25 +0000 (13:43 -0800)
committerLinus Torvalds <torvalds@linux-foundation.org>
Sat, 6 Mar 2010 19:26:36 +0000 (11:26 -0800)
The hardcoded value doesn't really work for all cards.

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/mmc/host/bfin_sdh.c

index f218a99645524216ce9ccbffac575578e7f28725..56f7b448b9112e8360e4d31c2178431243d545bd 100644 (file)
@@ -115,6 +115,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
        unsigned int length;
        unsigned int data_ctl;
        unsigned int dma_cfg;
+       unsigned int cycle_ns, timeout;
 
        dev_dbg(mmc_dev(host->mmc), "%s enter flags: 0x%x\n", __func__, data->flags);
        host->data = data;
@@ -135,8 +136,11 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
        data_ctl |= ((ffs(data->blksz) - 1) << 4);
 
        bfin_write_SDH_DATA_CTL(data_ctl);
-
-       bfin_write_SDH_DATA_TIMER(0xFFFF);
+       /* the time of a host clock period in ns */
+       cycle_ns = 1000000000 / (get_sclk() / (2 * (host->clk_div + 1)));
+       timeout = data->timeout_ns / cycle_ns;
+       timeout += data->timeout_clks;
+       bfin_write_SDH_DATA_TIMER(timeout);
        SSYNC();
 
        if (data->flags & MMC_DATA_READ) {