drm/i915: Move SKL+ DBUF enable/disable to display core init/uninit
authorVille Syrjälä <ville.syrjala@linux.intel.com>
Fri, 13 May 2016 20:41:30 +0000 (23:41 +0300)
committerVille Syrjälä <ville.syrjala@linux.intel.com>
Mon, 23 May 2016 18:11:14 +0000 (21:11 +0300)
SKL and BXT have the same snippets of code for enabling disabling the
DBUF. Extract those into helpers and move the calls from
init/unit_cdclk() to the display core init/init since this stuff isn't
really about cdclk. Also doing the enable twice shouldn't hurt since
you're just setting the request bit again when it was already set.

We can also toss in a few WARNs about the register values into
skl_get_dpll0_vco() now that we know that things should always be
sane there.

Flatten skl_init_cdclk() while at it.

v2: s/skl/gen9/ in function names (Imre)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463172100-24715-12-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_runtime_pm.c

index 58b8d759eaaa6e45cc1e968aa38345191bcb9aec..6b2b965c254d9afb8edddc2ecadb9cb13d863818 100644 (file)
@@ -5400,18 +5400,6 @@ static bool broxton_cdclk_is_enabled(struct drm_i915_private *dev_priv)
 
        /* TODO: Check for a valid CDCLK rate */
 
-       if (!(I915_READ(DBUF_CTL) & DBUF_POWER_REQUEST)) {
-               DRM_DEBUG_DRIVER("CDCLK enabled, but DBUF power not requested\n");
-
-               return false;
-       }
-
-       if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE)) {
-               DRM_DEBUG_DRIVER("CDCLK enabled, but DBUF power hasn't settled\n");
-
-               return false;
-       }
-
        return true;
 }
 
@@ -5438,26 +5426,10 @@ void broxton_init_cdclk(struct drm_i915_private *dev_priv)
         *   here, it belongs to modeset time
         */
        broxton_set_cdclk(dev_priv, 624000);
-
-       I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
-       POSTING_READ(DBUF_CTL);
-
-       udelay(10);
-
-       if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
-               DRM_ERROR("DBuf power enable timeout!\n");
 }
 
 void broxton_uninit_cdclk(struct drm_i915_private *dev_priv)
 {
-       I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
-       POSTING_READ(DBUF_CTL);
-
-       udelay(10);
-
-       if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
-               DRM_ERROR("DBuf power disable timeout!\n");
-
        /* Set minimum (bypass) frequency, in effect turning off the DE PLL */
        broxton_set_cdclk(dev_priv, 19200);
 }
@@ -5679,15 +5651,6 @@ static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv);
 
 void skl_uninit_cdclk(struct drm_i915_private *dev_priv)
 {
-       /* disable DBUF power */
-       I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
-       POSTING_READ(DBUF_CTL);
-
-       udelay(10);
-
-       if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
-               DRM_ERROR("DBuf power disable timeout\n");
-
        skl_set_cdclk(dev_priv, 24000, 0);
 }
 
@@ -5705,24 +5668,15 @@ void skl_init_cdclk(struct drm_i915_private *dev_priv)
                if (dev_priv->skl_preferred_vco_freq == 0)
                        skl_set_preferred_cdclk_vco(dev_priv,
                                                    dev_priv->skl_vco_freq);
-       } else {
-               /* set CDCLK to the lowest frequency, Modeset follows */
-               vco = dev_priv->skl_preferred_vco_freq;
-               if (vco == 0)
-                       vco = 8100;
-               cdclk = skl_calc_cdclk(0, vco);
-
-               skl_set_cdclk(dev_priv, cdclk, vco);
+               return;
        }
 
-       /* enable DBUF power */
-       I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
-       POSTING_READ(DBUF_CTL);
-
-       udelay(10);
+       vco = dev_priv->skl_preferred_vco_freq;
+       if (vco == 0)
+               vco = 8100;
+       cdclk = skl_calc_cdclk(0, vco);
 
-       if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
-               DRM_ERROR("DBuf power enable timeout\n");
+       skl_set_cdclk(dev_priv, cdclk, vco);
 }
 
 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
index fefe22c3c1638d2d699bf42a00c77c23e50366f1..dc74f38d945ffee723282758b5fb32faeafc97db 100644 (file)
@@ -2176,6 +2176,28 @@ static void intel_power_domains_sync_hw(struct drm_i915_private *dev_priv)
        mutex_unlock(&power_domains->lock);
 }
 
+static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
+{
+       I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST);
+       POSTING_READ(DBUF_CTL);
+
+       udelay(10);
+
+       if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE))
+               DRM_ERROR("DBuf power enable timeout\n");
+}
+
+static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
+{
+       I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST);
+       POSTING_READ(DBUF_CTL);
+
+       udelay(10);
+
+       if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE)
+               DRM_ERROR("DBuf power disable timeout!\n");
+}
+
 static void skl_display_core_init(struct drm_i915_private *dev_priv,
                                   bool resume)
 {
@@ -2202,6 +2224,8 @@ static void skl_display_core_init(struct drm_i915_private *dev_priv,
 
        skl_init_cdclk(dev_priv);
 
+       gen9_dbuf_enable(dev_priv);
+
        if (resume && dev_priv->csr.dmc_payload)
                intel_csr_load_program(dev_priv);
 }
@@ -2213,6 +2237,8 @@ static void skl_display_core_uninit(struct drm_i915_private *dev_priv)
 
        gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 
+       gen9_dbuf_disable(dev_priv);
+
        skl_uninit_cdclk(dev_priv);
 
        /* The spec doesn't call for removing the reset handshake flag */
@@ -2257,6 +2283,9 @@ void bxt_display_core_init(struct drm_i915_private *dev_priv,
        mutex_unlock(&power_domains->lock);
 
        broxton_init_cdclk(dev_priv);
+
+       gen9_dbuf_enable(dev_priv);
+
        broxton_ddi_phy_init(dev_priv);
 
        broxton_cdclk_verify_state(dev_priv);
@@ -2274,6 +2303,9 @@ void bxt_display_core_uninit(struct drm_i915_private *dev_priv)
        gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 
        broxton_ddi_phy_uninit(dev_priv);
+
+       gen9_dbuf_disable(dev_priv);
+
        broxton_uninit_cdclk(dev_priv);
 
        /* The spec doesn't call for removing the reset handshake flag */