ARM: kirkwood: fdt: facilitate new boards during fdt migration
authorJason Cooper <jason@lakedaemon.net>
Thu, 15 Mar 2012 00:52:31 +0000 (00:52 +0000)
committerJason Cooper <jason@lakedaemon.net>
Fri, 16 Mar 2012 04:28:42 +0000 (04:28 +0000)
Move all dreamplug-specific code out of board-dt.c and into
board-dreamplug.c.  This way new boards that are added during the
conversion to fdt don't clutter up board-dt.c.

Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arch/arm/mach-kirkwood/Makefile
arch/arm/mach-kirkwood/board-dreamplug.c [new file with mode: 0644]
arch/arm/mach-kirkwood/board-dt.c
arch/arm/mach-kirkwood/common.h

index acbc5e1db06f1c195762d1275e2ebc5294d64830..e299a9576bf0d00b8c6cbd77191367bc2cc40e06 100644 (file)
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_T5325)              += t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)                 += cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)         += board-dt.o
+obj-$(CONFIG_MACH_DREAMPLUG_DT)                += board-dreamplug.o
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
new file mode 100644 (file)
index 0000000..9854539
--- /dev/null
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dreamplug.c
+ *
+ * Marvell DreamPlug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition dreamplug_partitions[] = {
+       {
+               .name   = "u-boot",
+               .size   = SZ_512K,
+               .offset = 0,
+       },
+       {
+               .name   = "u-boot env",
+               .size   = SZ_64K,
+               .offset = SZ_512K + SZ_512K,
+       },
+       {
+               .name   = "dtb",
+               .size   = SZ_64K,
+               .offset = SZ_512K + SZ_512K + SZ_512K,
+       },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+       .type           = "mx25l1606e",
+       .name           = "spi_flash",
+       .parts          = dreamplug_partitions,
+       .nr_parts       = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+       {
+               .modalias       = "m25p80",
+               .platform_data  = &dreamplug_spi_slave_data,
+               .irq            = -1,
+               .max_speed_hz   = 50000000,
+               .bus_num        = 0,
+               .chip_select    = 0,
+       },
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+       .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+       .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+       .n_ports        = 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+       /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+       {
+               .name                   = "dreamplug:blue:bluetooth",
+               .gpio                   = 47,
+               .active_low             = 1,
+       },
+       {
+               .name                   = "dreamplug:green:wifi",
+               .gpio                   = 48,
+               .active_low             = 1,
+       },
+       {
+               .name                   = "dreamplug:green:wifi_ap",
+               .gpio                   = 49,
+               .active_low             = 1,
+       },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+       .leds           = dreamplug_led_pins,
+       .num_leds       = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+       .name   = "leds-gpio",
+       .id     = -1,
+       .dev    = {
+               .platform_data  = &dreamplug_led_data,
+       }
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+       MPP0_SPI_SCn,
+       MPP1_SPI_MOSI,
+       MPP2_SPI_SCK,
+       MPP3_SPI_MISO,
+       MPP47_GPIO,     /* Bluetooth LED */
+       MPP48_GPIO,     /* Wifi LED */
+       MPP49_GPIO,     /* Wifi AP LED */
+       0
+};
+
+void __init dreamplug_init(void)
+{
+       /*
+        * Basic setup. Needs to be called early.
+        */
+       kirkwood_mpp_conf(dreamplug_mpp_config);
+
+       spi_register_board_info(dreamplug_spi_slave_info,
+                               ARRAY_SIZE(dreamplug_spi_slave_info));
+       kirkwood_spi_init();
+
+       kirkwood_ehci_init();
+       kirkwood_ge00_init(&dreamplug_ge00_data);
+       kirkwood_ge01_init(&dreamplug_ge01_data);
+       kirkwood_sata_init(&dreamplug_sata_data);
+       kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+       platform_device_register(&dreamplug_leds);
+}
index 9bd35ac730b357f3d1f34c526b47f299bb84c442..975ad01486526a9f1cd43e870aeeca662a053d60 100644 (file)
@@ -3,7 +3,7 @@
  *
  * arch/arm/mach-kirkwood/board-dt.c
  *
- * Marvell DreamPlug Reference Board Setup
+ * Flattened Device Tree board initialization
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
-#include <plat/mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct of_device_id kirkwood_dt_match_table[] __initdata = {
        { .compatible = "simple-bus", },
        { }
 };
 
-struct mtd_partition dreamplug_partitions[] = {
-       {
-               .name   = "u-boot",
-               .size   = SZ_512K,
-               .offset = 0,
-       },
-       {
-               .name   = "u-boot env",
-               .size   = SZ_64K,
-               .offset = SZ_512K + SZ_512K,
-       },
-       {
-               .name   = "dtb",
-               .size   = SZ_64K,
-               .offset = SZ_512K + SZ_512K + SZ_512K,
-       },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
-       .type           = "mx25l1606e",
-       .name           = "spi_flash",
-       .parts          = dreamplug_partitions,
-       .nr_parts       = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
-       {
-               .modalias       = "m25p80",
-               .platform_data  = &dreamplug_spi_slave_data,
-               .irq            = -1,
-               .max_speed_hz   = 50000000,
-               .bus_num        = 0,
-               .chip_select    = 0,
-       },
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-       .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-       .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data dreamplug_sata_data = {
-       .n_ports        = 1,
-};
-
-static struct mvsdio_platform_data dreamplug_mvsdio_data = {
-       /* unfortunately the CD signal has not been connected */
-};
-
-static struct gpio_led dreamplug_led_pins[] = {
-       {
-               .name                   = "dreamplug:blue:bluetooth",
-               .gpio                   = 47,
-               .active_low             = 1,
-       },
-       {
-               .name                   = "dreamplug:green:wifi",
-               .gpio                   = 48,
-               .active_low             = 1,
-       },
-       {
-               .name                   = "dreamplug:green:wifi_ap",
-               .gpio                   = 49,
-               .active_low             = 1,
-       },
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
-       .leds           = dreamplug_led_pins,
-       .num_leds       = ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
-       .name   = "leds-gpio",
-       .id     = -1,
-       .dev    = {
-               .platform_data  = &dreamplug_led_data,
-       }
-};
-
-static unsigned int dreamplug_mpp_config[] __initdata = {
-       MPP0_SPI_SCn,
-       MPP1_SPI_MOSI,
-       MPP2_SPI_SCK,
-       MPP3_SPI_MISO,
-       MPP47_GPIO,     /* Bluetooth LED */
-       MPP48_GPIO,     /* Wifi LED */
-       MPP49_GPIO,     /* Wifi AP LED */
-       0
-};
-
-static void __init dreamplug_init(void)
-{
-       /*
-        * Basic setup. Needs to be called early.
-        */
-       kirkwood_mpp_conf(dreamplug_mpp_config);
-
-       spi_register_board_info(dreamplug_spi_slave_info,
-                               ARRAY_SIZE(dreamplug_spi_slave_info));
-       kirkwood_spi_init();
-
-       kirkwood_ehci_init();
-       kirkwood_ge00_init(&dreamplug_ge00_data);
-       kirkwood_ge01_init(&dreamplug_ge01_data);
-       kirkwood_sata_init(&dreamplug_sata_data);
-       kirkwood_sdio_init(&dreamplug_mvsdio_data);
-
-       platform_device_register(&dreamplug_leds);
-}
-
 static void __init kirkwood_dt_init(void)
 {
        pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
index c38244724fdcfd49e748fdecbc84474ddb23ac24..473757818e0211834266489f47beb78b82fed28f 100644 (file)
@@ -51,6 +51,14 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev
 void kirkwood_audio_init(void);
 void kirkwood_restart(char, const char *);
 
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_DREAMPLUG_DT
+void dreamplug_init(void);
+#else
+static inline void dreamplug_init(void) {};
+#endif
+
+/* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);
 void kirkwood_rtc_init(void);