The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame
and needs the driver to acknowledge that by clearing the bit.
Unless we clear it "between" frames, the RGB output only shows noise
instead of the picture. atomic_flush is the place for it that least
affects other code (doing it on vblank would require converting all
other usages of the reg_lock to spin_(un)lock_irq, which would affect
performance for everyone).
This seems to be a redundant synchronization mechanism that was removed
in later iterations of the VOP hardware block.
Fixes:
f4a6de855eae ("drm: rockchip: vop: add rk3066 vop definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-2-val@packett.cool
VOP_AFBC_SET(vop, enable, s->enable_afbc);
vop_cfg_done(vop);
+ /* Ack the DMA transfer of the previous frame (RK3066). */
+ if (VOP_HAS_REG(vop, common, dma_stop))
+ VOP_REG_SET(vop, common, dma_stop, 0);
+
spin_unlock(&vop->reg_lock);
/*
struct vop_reg lut_buffer_index;
struct vop_reg gate_en;
struct vop_reg mmu_en;
+ struct vop_reg dma_stop;
struct vop_reg out_mode;
struct vop_reg standby;
};
};
static const struct vop_common rk3066_common = {
+ .dma_stop = VOP_REG(RK3066_SYS_CTRL0, 0x1, 0),
.standby = VOP_REG(RK3066_SYS_CTRL0, 0x1, 1),
.out_mode = VOP_REG(RK3066_DSP_CTRL0, 0xf, 0),
.cfg_done = VOP_REG(RK3066_REG_CFG_DONE, 0x1, 0),