--- /dev/null
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcom-sdx55.dtsi"
+#include "qcom-pmx55.dtsi"
+
+/ {
+ model = "Telit FN980 TLB";
+ compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55";
+ qcom,board-id = <0xb010008 0x0>;
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mpss_debug_mem: memory@8ef00000 {
+ no-map;
+ reg = <0x8ef00000 0x800000>;
+ };
+
+ ipa_fw_mem: memory@8fced000 {
+ no-map;
+ reg = <0x8fced000 0x10000>;
+ };
+
+ mpss_adsp_mem: memory@90800000 {
+ no-map;
+ reg = <0x90800000 0xf800000>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ vreg_bob_3p3: pmx55-bob {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_s7e_mx_0p752: pmx55-s7e {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s7e_mx_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_sd_vdd: sd-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_sd_vdd";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ vin-supply = <&vreg_vddpx_2>;
+ };
+
+ vreg_vddpx_2: vddpx-2 {
+ compatible = "regulator-gpio";
+ regulator-name = "vreg_vddpx_2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2850000>;
+ enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+ gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0>, <2850000 1>;
+ startup-delay-us = <200000>;
+ enable-active-high;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ pmx55-rpmh-regulators {
+ compatible = "qcom,pmx55-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-l1-l2-supply = <&vreg_s2e_1p224>;
+ vdd-l3-l9-supply = <&vreg_s3e_0p824>;
+ vdd-l4-l12-supply = <&vreg_s4e_1p904>;
+ vdd-l5-l6-supply = <&vreg_s4e_1p904>;
+ vdd-l7-l8-supply = <&vreg_s3e_0p824>;
+ vdd-l10-l11-l13-supply = <&vreg_bob_3p3>;
+ vdd-l14-supply = <&vreg_s7e_mx_0p752>;
+ vdd-l15-supply = <&vreg_s2e_1p224>;
+ vdd-l16-supply = <&vreg_s4e_1p904>;
+
+ vreg_s2e_1p224: smps2 {
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <1400000>;
+ };
+
+ vreg_s3e_0p824: smps3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_s4e_1p904: smps4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1960000>;
+ };
+
+ vreg_l1e_bb_1p2: ldo1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo2 {
+ regulator-min-microvolt = <1128000>;
+ regulator-max-microvolt = <1128000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo3 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l4e_bb_0p875: ldo4 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <872000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l5e_bb_1p7: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo8 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <900000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo9 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ vreg_l10e_3p1: ldo10 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo12 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo13 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo14 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo15 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+
+ ldo16 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "ok";
+};
+
+&qpic_bam {
+ status = "ok";
+};
+
+&qpic_nand {
+ status = "ok";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* ico and efs2 partitions are secured */
+ secure-regions = <0x500000 0x500000
+ 0xa00000 0xb00000>;
+ };
+};
+
+&remoteproc_mpss {
+ status = "okay";
+ memory-region = <&mpss_adsp_mem>;
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+ vdda33-supply = <&vreg_l10e_3p1>;
+ vdda18-supply = <&vreg_l5e_bb_1p7>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+ vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};