M: Andy Gross <andy.gross@linaro.org>
M: David Brown <david.brown@linaro.org>
L: linux-arm-msm@vger.kernel.org
-L: linux-soc@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/soc/qcom/
F: arch/arm/boot/dts/qcom-*.dts
BROADCOM BCM5301X ARM ARCHITECTURE
M: Hauke Mehrtens <hauke@hauke-m.de>
M: Rafał Miłecki <zajec5@gmail.com>
-M: Jon Mason <jonmason@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org
S: Maintained
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
-M: Jon Mason <jonmason@broadcom.com>
M: bcm-kernel-feedback-list@broadcom.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/broadcom/cygnus-linux.git
vmmc-supply = <&vmmc_fixed>;
bus-width = <4>;
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
- cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+ cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
};
&mmc3 {
compatible = "ti,wl1271";
reg = <2>;
interrupt-parent = <&gpio6>;
- interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+ interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
ref-clock-frequency = <26000000>;
tcxo-clock-frequency = <26000000>;
};
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
- eeprom@50 {
- compatible = "atmel,24c04";
- pagesize = <16>;
- reg = <0x50>;
- };
-
hpa1: amp@60 {
compatible = "ti,tpa6130a2";
reg = <0x60>;
};
&mmc3 {
- interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;
* jumpering combinations for the long run.
*/
&mmc3 {
- interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+ interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;
#include "rk3288.dtsi"
/ {
- memory@0 {
+ /*
+ * The default coreboot on veyron devices ignores memory@0 nodes
+ * and would instead create another memory node.
+ */
+ memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
0x1 0x0 0x60000000 0x10000000
0x2 0x0 0x70000000 0x10000000
0x3 0x0 0x80000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&h32ck>;
status = "disabled";
nand_controller: nand-controller {
};
static struct davinci_gpio_platform_data da830_gpio_platform_data = {
- .ngpio = 128,
+ .no_auto_base = true,
+ .base = 0,
+ .ngpio = 128,
};
int __init da830_register_gpio(void)
}
static struct davinci_gpio_platform_data da850_gpio_platform_data = {
- .ngpio = 144,
+ .no_auto_base = true,
+ .base = 0,
+ .ngpio = 144,
};
int __init da850_register_gpio(void)
},
{ /* interrupt */
.start = IRQ_DA8XX_GPIO0,
+ .end = IRQ_DA8XX_GPIO0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO1,
+ .end = IRQ_DA8XX_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO2,
+ .end = IRQ_DA8XX_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO3,
+ .end = IRQ_DA8XX_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO4,
+ .end = IRQ_DA8XX_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO5,
+ .end = IRQ_DA8XX_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO6,
+ .end = IRQ_DA8XX_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO7,
+ .end = IRQ_DA8XX_GPIO7,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DA8XX_GPIO8,
.end = IRQ_DA8XX_GPIO8,
.flags = IORESOURCE_IRQ,
},
},
{ /* interrupt */
.start = IRQ_DM355_GPIOBNK0,
+ .end = IRQ_DM355_GPIOBNK0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM355_GPIOBNK1,
+ .end = IRQ_DM355_GPIOBNK1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM355_GPIOBNK2,
+ .end = IRQ_DM355_GPIOBNK2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM355_GPIOBNK3,
+ .end = IRQ_DM355_GPIOBNK3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM355_GPIOBNK4,
+ .end = IRQ_DM355_GPIOBNK4,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM355_GPIOBNK5,
+ .end = IRQ_DM355_GPIOBNK5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM355_GPIOBNK6,
.end = IRQ_DM355_GPIOBNK6,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+ .no_auto_base = true,
+ .base = 0,
.ngpio = 104,
};
},
{ /* interrupt */
.start = IRQ_DM365_GPIO0,
+ .end = IRQ_DM365_GPIO0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO1,
+ .end = IRQ_DM365_GPIO1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO2,
+ .end = IRQ_DM365_GPIO2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO3,
+ .end = IRQ_DM365_GPIO3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO4,
+ .end = IRQ_DM365_GPIO4,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO5,
+ .end = IRQ_DM365_GPIO5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO6,
+ .end = IRQ_DM365_GPIO6,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM365_GPIO7,
.end = IRQ_DM365_GPIO7,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+ .no_auto_base = true,
+ .base = 0,
.ngpio = 104,
.gpio_unbanked = 8,
};
},
{ /* interrupt */
.start = IRQ_GPIOBNK0,
+ .end = IRQ_GPIOBNK0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_GPIOBNK1,
+ .end = IRQ_GPIOBNK1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_GPIOBNK2,
+ .end = IRQ_GPIOBNK2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_GPIOBNK3,
+ .end = IRQ_GPIOBNK3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_GPIOBNK4,
.end = IRQ_GPIOBNK4,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+ .no_auto_base = true,
+ .base = 0,
.ngpio = 71,
};
},
{ /* interrupt */
.start = IRQ_DM646X_GPIOBNK0,
+ .end = IRQ_DM646X_GPIOBNK0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_GPIOBNK1,
+ .end = IRQ_DM646X_GPIOBNK1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_GPIOBNK2,
.end = IRQ_DM646X_GPIOBNK2,
.flags = IORESOURCE_IRQ,
},
};
static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+ .no_auto_base = true,
+ .base = 0,
.ngpio = 43,
};
struct modem_private_data *priv = port->private_data;
int ret;
+ if (!priv)
+ return;
+
if (IS_ERR(priv->regulator))
return;
* to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
* omap44xx_prm_reconfigure_io_chain() must be called. No return value.
*/
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
{
s32 inst = omap4_prmst_get_prm_dev_inst();
};
};
};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+};
status = "okay";
};
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
&uart9 {
status = "okay";
};
};
&pcie0 {
- ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+ ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn_cpm>;
regulator-always-on;
vin-supply = <&vcc_sys>;
};
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
};
&cpu_l0 {
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
- reg = <0x00 0x42300000 0x00 0x100>;
+ reg = <0x42300000 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
chips->chip.set = davinci_gpio_set;
chips->chip.ngpio = ngpio;
- chips->chip.base = -1;
+ chips->chip.base = pdata->no_auto_base ? pdata->base : -1;
#ifdef CONFIG_OF_GPIO
chips->chip.of_gpio_n_cells = 2;
#define __DAVINCI_GPIO_PLATFORM_H
struct davinci_gpio_platform_data {
+ bool no_auto_base;
+ u32 base;
u32 ngpio;
u32 gpio_unbanked;
};
projects / linux-2.6-block.git / commitdiff