wireless: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
authorJoe Perches <joe@perches.com>
Sun, 28 Oct 2012 08:05:47 +0000 (01:05 -0700)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 14 Nov 2012 19:55:32 +0000 (14:55 -0500)
dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.
Coalesce formats for easier grep.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/at76c50x-usb.c
drivers/net/wireless/iwlegacy/common.h
drivers/net/wireless/iwlwifi/pcie/trans.c

index 99b9ddf21273b2244b2a8f9e03847a68a736bb61..77fa4286e5e98d2034fcbda6c0d786c3b455c50e 100644 (file)
@@ -379,7 +379,7 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
                 manifest_sync_timeout);
 
        if (!size) {
-               dev_printk(KERN_ERR, &udev->dev, "FW buffer length invalid!\n");
+               dev_err(&udev->dev, "FW buffer length invalid!\n");
                return -EINVAL;
        }
 
@@ -391,8 +391,8 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
                if (need_dfu_state) {
                        ret = at76_dfu_get_state(udev, &dfu_state);
                        if (ret < 0) {
-                               dev_printk(KERN_ERR, &udev->dev,
-                                          "cannot get DFU state: %d\n", ret);
+                               dev_err(&udev->dev,
+                                       "cannot get DFU state: %d\n", ret);
                                goto exit;
                        }
                        need_dfu_state = 0;
@@ -407,9 +407,9 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
                                dfu_timeout = at76_get_timeout(&dfu_stat_buf);
                                need_dfu_state = 0;
                        } else
-                               dev_printk(KERN_ERR, &udev->dev,
-                                          "at76_dfu_get_status returned %d\n",
-                                          ret);
+                               dev_err(&udev->dev,
+                                       "at76_dfu_get_status returned %d\n",
+                                       ret);
                        break;
 
                case STATE_DFU_DOWNLOAD_BUSY:
@@ -438,9 +438,9 @@ static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
                        blockno++;
 
                        if (ret != bsize)
-                               dev_printk(KERN_ERR, &udev->dev,
-                                          "at76_load_int_fw_block "
-                                          "returned %d\n", ret);
+                               dev_err(&udev->dev,
+                                       "at76_load_int_fw_block returned %d\n",
+                                       ret);
                        need_dfu_state = 1;
                        break;
 
@@ -1255,8 +1255,7 @@ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
        at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);
 
        if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
-               dev_printk(KERN_ERR, &udev->dev, "unexpected opmode %d\n",
-                          op_mode);
+               dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
                return -EINVAL;
        }
 
@@ -1275,9 +1274,9 @@ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
                         size, bsize, blockno);
                ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
                if (ret != bsize) {
-                       dev_printk(KERN_ERR, &udev->dev,
-                                  "loading %dth firmware block failed: %d\n",
-                                  blockno, ret);
+                       dev_err(&udev->dev,
+                               "loading %dth firmware block failed: %d\n",
+                               blockno, ret);
                        goto exit;
                }
                buf += bsize;
@@ -1293,8 +1292,8 @@ static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
 exit:
        kfree(block);
        if (ret < 0)
-               dev_printk(KERN_ERR, &udev->dev,
-                          "downloading external firmware failed: %d\n", ret);
+               dev_err(&udev->dev,
+                       "downloading external firmware failed: %d\n", ret);
        return ret;
 }
 
@@ -1308,8 +1307,8 @@ static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
                                   need_remap ? 0 : 2 * HZ);
 
        if (ret < 0) {
-               dev_printk(KERN_ERR, &udev->dev,
-                          "downloading internal fw failed with %d\n", ret);
+               dev_err(&udev->dev,
+                       "downloading internal fw failed with %d\n", ret);
                goto exit;
        }
 
@@ -1319,8 +1318,8 @@ static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
        if (need_remap) {
                ret = at76_remap(udev);
                if (ret < 0) {
-                       dev_printk(KERN_ERR, &udev->dev,
-                                  "sending REMAP failed with %d\n", ret);
+                       dev_err(&udev->dev,
+                               "sending REMAP failed with %d\n", ret);
                        goto exit;
                }
        }
@@ -1555,11 +1554,10 @@ static struct fwentry *at76_load_firmware(struct usb_device *udev,
        at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
        ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
        if (ret < 0) {
-               dev_printk(KERN_ERR, &udev->dev, "firmware %s not found!\n",
-                          fwe->fwname);
-               dev_printk(KERN_ERR, &udev->dev,
-                          "you may need to download the firmware from "
-                          "http://developer.berlios.de/projects/at76c503a/\n");
+               dev_err(&udev->dev, "firmware %s not found!\n",
+                       fwe->fwname);
+               dev_err(&udev->dev,
+                       "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
                goto exit;
        }
 
@@ -1567,17 +1565,17 @@ static struct fwentry *at76_load_firmware(struct usb_device *udev,
        fwh = (struct at76_fw_header *)(fwe->fw->data);
 
        if (fwe->fw->size <= sizeof(*fwh)) {
-               dev_printk(KERN_ERR, &udev->dev,
-                          "firmware is too short (0x%zx)\n", fwe->fw->size);
+               dev_err(&udev->dev,
+                       "firmware is too short (0x%zx)\n", fwe->fw->size);
                goto exit;
        }
 
        /* CRC currently not checked */
        fwe->board_type = le32_to_cpu(fwh->board_type);
        if (fwe->board_type != board_type) {
-               dev_printk(KERN_ERR, &udev->dev,
-                          "board type mismatch, requested %u, got %u\n",
-                          board_type, fwe->board_type);
+               dev_err(&udev->dev,
+                       "board type mismatch, requested %u, got %u\n",
+                       board_type, fwe->board_type);
                goto exit;
        }
 
@@ -2150,8 +2148,7 @@ static int at76_alloc_urbs(struct at76_priv *priv,
        }
 
        if (!ep_in || !ep_out) {
-               dev_printk(KERN_ERR, &interface->dev,
-                          "bulk endpoints missing\n");
+               dev_err(&interface->dev, "bulk endpoints missing\n");
                return -ENXIO;
        }
 
@@ -2161,15 +2158,14 @@ static int at76_alloc_urbs(struct at76_priv *priv,
        priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
        priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
        if (!priv->rx_urb || !priv->tx_urb) {
-               dev_printk(KERN_ERR, &interface->dev, "cannot allocate URB\n");
+               dev_err(&interface->dev, "cannot allocate URB\n");
                return -ENOMEM;
        }
 
        buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
        priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
        if (!priv->bulk_out_buffer) {
-               dev_printk(KERN_ERR, &interface->dev,
-                          "cannot allocate output buffer\n");
+               dev_err(&interface->dev, "cannot allocate output buffer\n");
                return -ENOMEM;
        }
 
@@ -2230,8 +2226,7 @@ static int at76_init_new_device(struct at76_priv *priv,
        /* MAC address */
        ret = at76_get_hw_config(priv);
        if (ret < 0) {
-               dev_printk(KERN_ERR, &interface->dev,
-                          "cannot get MAC address\n");
+               dev_err(&interface->dev, "cannot get MAC address\n");
                goto exit;
        }
 
@@ -2358,8 +2353,8 @@ static int at76_probe(struct usb_interface *interface,
           we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */
 
        if (op_mode == OPMODE_HW_CONFIG_MODE) {
-               dev_printk(KERN_ERR, &interface->dev,
-                          "cannot handle a device in HW_CONFIG_MODE\n");
+               dev_err(&interface->dev,
+                       "cannot handle a device in HW_CONFIG_MODE\n");
                ret = -EBUSY;
                goto error;
        }
@@ -2371,9 +2366,9 @@ static int at76_probe(struct usb_interface *interface,
                           "downloading internal firmware\n");
                ret = at76_load_internal_fw(udev, fwe);
                if (ret < 0) {
-                       dev_printk(KERN_ERR, &interface->dev,
-                                  "error %d downloading internal firmware\n",
-                                  ret);
+                       dev_err(&interface->dev,
+                               "error %d downloading internal firmware\n",
+                               ret);
                        goto error;
                }
                usb_put_dev(udev);
@@ -2408,8 +2403,8 @@ static int at76_probe(struct usb_interface *interface,
                /* Re-check firmware version */
                ret = at76_get_mib(udev, MIB_FW_VERSION, &fwv, sizeof(fwv));
                if (ret < 0) {
-                       dev_printk(KERN_ERR, &interface->dev,
-                                  "error %d getting firmware version\n", ret);
+                       dev_err(&interface->dev,
+                               "error %d getting firmware version\n", ret);
                        goto error;
                }
        }
@@ -2449,7 +2444,7 @@ static void at76_disconnect(struct usb_interface *interface)
 
        wiphy_info(priv->hw->wiphy, "disconnecting\n");
        at76_delete_device(priv);
-       dev_printk(KERN_INFO, &interface->dev, "disconnected\n");
+       dev_info(&interface->dev, "disconnected\n");
 }
 
 /* Structure for registering this driver with the USB subsystem */
index b4bb813362bdbeb44afab3dd7b73d74dd556feb3..e254cba4557adbf12d6f3e7e0534b3c36c73c2d4 100644 (file)
@@ -2919,9 +2919,8 @@ do {                                                                      \
 #define IL_DBG(level, fmt, args...)                                    \
 do {                                                                   \
        if (il_get_debug_level(il) & level)                             \
-               dev_printk(KERN_ERR, &il->hw->wiphy->dev,               \
-                        "%c %s " fmt, in_interrupt() ? 'I' : 'U',      \
-                       __func__ , ## args);                            \
+               dev_err(&il->hw->wiphy->dev, "%c %s " fmt,              \
+                       in_interrupt() ? 'I' : 'U', __func__ , ##args); \
 } while (0)
 
 #define il_print_hex_dump(il, level, p, len)                           \
index f95d88df7772014a430f620c889303bf135ff9c3..4d9dfa7de4ec3df4c6ae8edf536d845e03c6329e 100644 (file)
@@ -699,13 +699,11 @@ static void iwl_apm_config(struct iwl_trans *trans)
                                PCI_CFG_LINK_CTRL_VAL_L1_EN) {
                /* L1-ASPM enabled; disable(!) L0S */
                iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-               dev_printk(KERN_INFO, trans->dev,
-                          "L1 Enabled; Disabling L0S\n");
+               dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
        } else {
                /* L1-ASPM disabled; enable(!) L0S */
                iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-               dev_printk(KERN_INFO, trans->dev,
-                          "L1 Disabled; Enabling L0S\n");
+               dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
        }
        trans->pm_support = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
 }
@@ -2150,34 +2148,29 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
                                                          DMA_BIT_MASK(32));
                /* both attempts failed: */
                if (err) {
-                       dev_printk(KERN_ERR, &pdev->dev,
-                                  "No suitable DMA available.\n");
+                       dev_err(&pdev->dev, "No suitable DMA available\n");
                        goto out_pci_disable_device;
                }
        }
 
        err = pci_request_regions(pdev, DRV_NAME);
        if (err) {
-               dev_printk(KERN_ERR, &pdev->dev,
-                          "pci_request_regions failed\n");
+               dev_err(&pdev->dev, "pci_request_regions failed\n");
                goto out_pci_disable_device;
        }
 
        trans_pcie->hw_base = pci_ioremap_bar(pdev, 0);
        if (!trans_pcie->hw_base) {
-               dev_printk(KERN_ERR, &pdev->dev, "pci_ioremap_bar failed\n");
+               dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
                err = -ENODEV;
                goto out_pci_release_regions;
        }
 
-       dev_printk(KERN_INFO, &pdev->dev,
-                  "pci_resource_len = 0x%08llx\n",
-                  (unsigned long long) pci_resource_len(pdev, 0));
-       dev_printk(KERN_INFO, &pdev->dev,
-                  "pci_resource_base = %p\n", trans_pcie->hw_base);
+       dev_info(&pdev->dev, "pci_resource_len = 0x%08llx\n",
+                (unsigned long long) pci_resource_len(pdev, 0));
+       dev_info(&pdev->dev, "pci_resource_base = %p\n", trans_pcie->hw_base);
 
-       dev_printk(KERN_INFO, &pdev->dev,
-                  "HW Revision ID = 0x%X\n", pdev->revision);
+       dev_info(&pdev->dev, "HW Revision ID = 0x%X\n", pdev->revision);
 
        /* We disable the RETRY_TIMEOUT register (0x41) to keep
         * PCI Tx retries from interfering with C3 CPU state */
@@ -2185,8 +2178,7 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 
        err = pci_enable_msi(pdev);
        if (err)
-               dev_printk(KERN_ERR, &pdev->dev,
-                          "pci_enable_msi failed(0X%x)\n", err);
+               dev_err(&pdev->dev, "pci_enable_msi failed(0X%x)\n", err);
 
        trans->dev = &pdev->dev;
        trans_pcie->irq = pdev->irq;