arm64: dts: ls1043a: Change I2C clock name to ipg to fix DTB_CHECK warning

dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c"
to fix below DTB_CHECK warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: i2c@2190000: clock-names:0: 'ipg' was expecte

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 8ee6d8c0ef6194fb8ba4e1155818e0dc43338722..a4a476b04ebe3c75f8d654c58b50ae1e77dd0d5e 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -533,7 +533,7 @@
                        #size-cells = <0>;
                        reg = <0x0 0x2180000 0x0 0x10000>;
                        interrupts = <0 56 0x4>;
-                       clock-names = "i2c";
+                       clock-names = "ipg";
                        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
                                            QORIQ_CLK_PLL_DIV(1)>;
                        dmas = <&edma0 1 38>,
@@ -548,7 +548,7 @@
                        #size-cells = <0>;
                        reg = <0x0 0x2190000 0x0 0x10000>;
                        interrupts = <0 57 0x4>;
-                       clock-names = "i2c";
+                       clock-names = "ipg";
                        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
                                            QORIQ_CLK_PLL_DIV(1)>;
                        scl-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -561,7 +561,7 @@
                        #size-cells = <0>;
                        reg = <0x0 0x21a0000 0x0 0x10000>;
                        interrupts = <0 58 0x4>;
-                       clock-names = "i2c";
+                       clock-names = "ipg";
                        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
                                            QORIQ_CLK_PLL_DIV(1)>;
                        scl-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -574,7 +574,7 @@
                        #size-cells = <0>;
                        reg = <0x0 0x21b0000 0x0 0x10000>;
                        interrupts = <0 59 0x4>;
-                       clock-names = "i2c";
+                       clock-names = "ipg";
                        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
                                            QORIQ_CLK_PLL_DIV(1)>;
                        scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;