mac80211: move ieee80211_determine_chantype function
authorJohannes Berg <johannes.berg@intel.com>
Fri, 8 Feb 2013 13:52:32 +0000 (14:52 +0100)
committerJohannes Berg <johannes.berg@intel.com>
Fri, 15 Feb 2013 08:41:37 +0000 (09:41 +0100)
The next patch will need it further up in the file, so
move it unchanged now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
net/mac80211/mlme.c

index 8fdf1e1aee5edc1594362bf19252316ff28343b0..50423c66c239f66dc4779e6c9db3a36c3e02f9bd 100644 (file)
@@ -174,6 +174,201 @@ static int ecw2cw(int ecw)
        return (1 << ecw) - 1;
 }
 
+static u32 chandef_downgrade(struct cfg80211_chan_def *c)
+{
+       u32 ret;
+       int tmp;
+
+       switch (c->width) {
+       case NL80211_CHAN_WIDTH_20:
+               c->width = NL80211_CHAN_WIDTH_20_NOHT;
+               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+               break;
+       case NL80211_CHAN_WIDTH_40:
+               c->width = NL80211_CHAN_WIDTH_20;
+               c->center_freq1 = c->chan->center_freq;
+               ret = IEEE80211_STA_DISABLE_40MHZ |
+                     IEEE80211_STA_DISABLE_VHT;
+               break;
+       case NL80211_CHAN_WIDTH_80:
+               tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
+               /* n_P40 */
+               tmp /= 2;
+               /* freq_P40 */
+               c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
+               c->width = NL80211_CHAN_WIDTH_40;
+               ret = IEEE80211_STA_DISABLE_VHT;
+               break;
+       case NL80211_CHAN_WIDTH_80P80:
+               c->center_freq2 = 0;
+               c->width = NL80211_CHAN_WIDTH_80;
+               ret = IEEE80211_STA_DISABLE_80P80MHZ |
+                     IEEE80211_STA_DISABLE_160MHZ;
+               break;
+       case NL80211_CHAN_WIDTH_160:
+               /* n_P20 */
+               tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
+               /* n_P80 */
+               tmp /= 4;
+               c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
+               c->width = NL80211_CHAN_WIDTH_80;
+               ret = IEEE80211_STA_DISABLE_80P80MHZ |
+                     IEEE80211_STA_DISABLE_160MHZ;
+               break;
+       default:
+       case NL80211_CHAN_WIDTH_20_NOHT:
+               WARN_ON_ONCE(1);
+               c->width = NL80211_CHAN_WIDTH_20_NOHT;
+               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+               break;
+       }
+
+       WARN_ON_ONCE(!cfg80211_chandef_valid(c));
+
+       return ret;
+}
+
+static u32
+ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
+                            struct ieee80211_supported_band *sband,
+                            struct ieee80211_channel *channel,
+                            const struct ieee80211_ht_operation *ht_oper,
+                            const struct ieee80211_vht_operation *vht_oper,
+                            struct cfg80211_chan_def *chandef)
+{
+       struct cfg80211_chan_def vht_chandef;
+       u32 ht_cfreq, ret;
+
+       chandef->chan = channel;
+       chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+       chandef->center_freq1 = channel->center_freq;
+       chandef->center_freq2 = 0;
+
+       if (!ht_oper || !sband->ht_cap.ht_supported) {
+               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       chandef->width = NL80211_CHAN_WIDTH_20;
+
+       ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
+                                                 channel->band);
+       /* check that channel matches the right operating channel */
+       if (channel->center_freq != ht_cfreq) {
+               /*
+                * It's possible that some APs are confused here;
+                * Netgear WNDR3700 sometimes reports 4 higher than
+                * the actual channel in association responses, but
+                * since we look at probe response/beacon data here
+                * it should be OK.
+                */
+               sdata_info(sdata,
+                          "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+                          channel->center_freq, ht_cfreq,
+                          ht_oper->primary_chan, channel->band);
+               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       /* check 40 MHz support, if we have it */
+       if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+               switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
+               case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
+                       chandef->width = NL80211_CHAN_WIDTH_40;
+                       chandef->center_freq1 += 10;
+                       break;
+               case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
+                       chandef->width = NL80211_CHAN_WIDTH_40;
+                       chandef->center_freq1 -= 10;
+                       break;
+               }
+       } else {
+               /* 40 MHz (and 80 MHz) must be supported for VHT */
+               ret = IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       if (!vht_oper || !sband->vht_cap.vht_supported) {
+               ret = IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       vht_chandef.chan = channel;
+       vht_chandef.center_freq1 =
+               ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
+                                              channel->band);
+       vht_chandef.center_freq2 = 0;
+
+       if (vht_oper->center_freq_seg2_idx)
+               vht_chandef.center_freq2 =
+                       ieee80211_channel_to_frequency(
+                               vht_oper->center_freq_seg2_idx,
+                               channel->band);
+
+       switch (vht_oper->chan_width) {
+       case IEEE80211_VHT_CHANWIDTH_USE_HT:
+               vht_chandef.width = chandef->width;
+               break;
+       case IEEE80211_VHT_CHANWIDTH_80MHZ:
+               vht_chandef.width = NL80211_CHAN_WIDTH_80;
+               break;
+       case IEEE80211_VHT_CHANWIDTH_160MHZ:
+               vht_chandef.width = NL80211_CHAN_WIDTH_160;
+               break;
+       case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
+               vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
+               break;
+       default:
+               sdata_info(sdata,
+                          "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
+                          vht_oper->chan_width);
+               ret = IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       if (!cfg80211_chandef_valid(&vht_chandef)) {
+               sdata_info(sdata,
+                          "AP VHT information is invalid, disable VHT\n");
+               ret = IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
+               ret = 0;
+               goto out;
+       }
+
+       if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
+               sdata_info(sdata,
+                          "AP VHT information doesn't match HT, disable VHT\n");
+               ret = IEEE80211_STA_DISABLE_VHT;
+               goto out;
+       }
+
+       *chandef = vht_chandef;
+
+       ret = 0;
+
+out:
+       while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
+                                       IEEE80211_CHAN_DISABLED)) {
+               if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
+                       ret = IEEE80211_STA_DISABLE_HT |
+                             IEEE80211_STA_DISABLE_VHT;
+                       goto out;
+               }
+
+               ret |= chandef_downgrade(chandef);
+       }
+
+       if (chandef->width != vht_chandef.width)
+               sdata_info(sdata,
+                          "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
+
+       WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
+       return ret;
+}
+
 static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata,
                                  struct sta_info *sta,
                                  struct ieee80211_ht_operation *ht_oper,
@@ -3321,201 +3516,6 @@ int ieee80211_max_network_latency(struct notifier_block *nb,
        return 0;
 }
 
-static u32 chandef_downgrade(struct cfg80211_chan_def *c)
-{
-       u32 ret;
-       int tmp;
-
-       switch (c->width) {
-       case NL80211_CHAN_WIDTH_20:
-               c->width = NL80211_CHAN_WIDTH_20_NOHT;
-               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
-               break;
-       case NL80211_CHAN_WIDTH_40:
-               c->width = NL80211_CHAN_WIDTH_20;
-               c->center_freq1 = c->chan->center_freq;
-               ret = IEEE80211_STA_DISABLE_40MHZ |
-                     IEEE80211_STA_DISABLE_VHT;
-               break;
-       case NL80211_CHAN_WIDTH_80:
-               tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
-               /* n_P40 */
-               tmp /= 2;
-               /* freq_P40 */
-               c->center_freq1 = c->center_freq1 - 20 + 40 * tmp;
-               c->width = NL80211_CHAN_WIDTH_40;
-               ret = IEEE80211_STA_DISABLE_VHT;
-               break;
-       case NL80211_CHAN_WIDTH_80P80:
-               c->center_freq2 = 0;
-               c->width = NL80211_CHAN_WIDTH_80;
-               ret = IEEE80211_STA_DISABLE_80P80MHZ |
-                     IEEE80211_STA_DISABLE_160MHZ;
-               break;
-       case NL80211_CHAN_WIDTH_160:
-               /* n_P20 */
-               tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
-               /* n_P80 */
-               tmp /= 4;
-               c->center_freq1 = c->center_freq1 - 40 + 80 * tmp;
-               c->width = NL80211_CHAN_WIDTH_80;
-               ret = IEEE80211_STA_DISABLE_80P80MHZ |
-                     IEEE80211_STA_DISABLE_160MHZ;
-               break;
-       default:
-       case NL80211_CHAN_WIDTH_20_NOHT:
-               WARN_ON_ONCE(1);
-               c->width = NL80211_CHAN_WIDTH_20_NOHT;
-               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
-               break;
-       }
-
-       WARN_ON_ONCE(!cfg80211_chandef_valid(c));
-
-       return ret;
-}
-
-static u32
-ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
-                            struct ieee80211_supported_band *sband,
-                            struct ieee80211_channel *channel,
-                            const struct ieee80211_ht_operation *ht_oper,
-                            const struct ieee80211_vht_operation *vht_oper,
-                            struct cfg80211_chan_def *chandef)
-{
-       struct cfg80211_chan_def vht_chandef;
-       u32 ht_cfreq, ret;
-
-       chandef->chan = channel;
-       chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
-       chandef->center_freq1 = channel->center_freq;
-       chandef->center_freq2 = 0;
-
-       if (!ht_oper || !sband->ht_cap.ht_supported) {
-               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       chandef->width = NL80211_CHAN_WIDTH_20;
-
-       ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
-                                                 channel->band);
-       /* check that channel matches the right operating channel */
-       if (channel->center_freq != ht_cfreq) {
-               /*
-                * It's possible that some APs are confused here;
-                * Netgear WNDR3700 sometimes reports 4 higher than
-                * the actual channel in association responses, but
-                * since we look at probe response/beacon data here
-                * it should be OK.
-                */
-               sdata_info(sdata,
-                          "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
-                          channel->center_freq, ht_cfreq,
-                          ht_oper->primary_chan, channel->band);
-               ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       /* check 40 MHz support, if we have it */
-       if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
-               switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
-               case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
-                       chandef->width = NL80211_CHAN_WIDTH_40;
-                       chandef->center_freq1 += 10;
-                       break;
-               case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
-                       chandef->width = NL80211_CHAN_WIDTH_40;
-                       chandef->center_freq1 -= 10;
-                       break;
-               }
-       } else {
-               /* 40 MHz (and 80 MHz) must be supported for VHT */
-               ret = IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       if (!vht_oper || !sband->vht_cap.vht_supported) {
-               ret = IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       vht_chandef.chan = channel;
-       vht_chandef.center_freq1 =
-               ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
-                                              channel->band);
-       vht_chandef.center_freq2 = 0;
-
-       if (vht_oper->center_freq_seg2_idx)
-               vht_chandef.center_freq2 =
-                       ieee80211_channel_to_frequency(
-                               vht_oper->center_freq_seg2_idx,
-                               channel->band);
-
-       switch (vht_oper->chan_width) {
-       case IEEE80211_VHT_CHANWIDTH_USE_HT:
-               vht_chandef.width = chandef->width;
-               break;
-       case IEEE80211_VHT_CHANWIDTH_80MHZ:
-               vht_chandef.width = NL80211_CHAN_WIDTH_80;
-               break;
-       case IEEE80211_VHT_CHANWIDTH_160MHZ:
-               vht_chandef.width = NL80211_CHAN_WIDTH_160;
-               break;
-       case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
-               vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
-               break;
-       default:
-               sdata_info(sdata,
-                          "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
-                          vht_oper->chan_width);
-               ret = IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       if (!cfg80211_chandef_valid(&vht_chandef)) {
-               sdata_info(sdata,
-                          "AP VHT information is invalid, disable VHT\n");
-               ret = IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
-               ret = 0;
-               goto out;
-       }
-
-       if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
-               sdata_info(sdata,
-                          "AP VHT information doesn't match HT, disable VHT\n");
-               ret = IEEE80211_STA_DISABLE_VHT;
-               goto out;
-       }
-
-       *chandef = vht_chandef;
-
-       ret = 0;
-
-out:
-       while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
-                                       IEEE80211_CHAN_DISABLED)) {
-               if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
-                       ret = IEEE80211_STA_DISABLE_HT |
-                             IEEE80211_STA_DISABLE_VHT;
-                       goto out;
-               }
-
-               ret |= chandef_downgrade(chandef);
-       }
-
-       if (chandef->width != vht_chandef.width)
-               sdata_info(sdata,
-                          "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
-
-       WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
-       return ret;
-}
-
 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
                                     struct cfg80211_bss *cbss)
 {