--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sophgo CV1800 Pin Controller
+
+maintainers:
+ - Inochi Amaoto <inochiama@outlook.com>
+
+properties:
+ compatible:
+ enum:
+ - sophgo,cv1800b-pinctrl
+ - sophgo,cv1812h-pinctrl
+ - sophgo,sg2000-pinctrl
+ - sophgo,sg2002-pinctrl
+
+ reg:
+ items:
+ - description: pinctrl for system domain
+ - description: pinctrl for rtc domain
+
+ reg-names:
+ items:
+ - const: sys
+ - const: rtc
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ '-cfg$':
+ type: object
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine.
+
+ additionalProperties: false
+
+ patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ Each subnode will list the pins it needs, and how they should
+ be configured, with regard to muxer configuration, bias, input
+ enable/disable, input schmitt trigger, slew-rate, drive strength
+ and bus hold state. In addition, all pins in the same subnode
+ should have the same power domain. For configuration detail,
+ refer to https://github.com/sophgo/sophgo-doc/.
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ pinmux:
+ description: |
+ The list of GPIOs and their mux settings that properties in the
+ node apply to. This should be set using the GPIOMUX or GPIOMUX2
+ macro.
+
+ bias-pull-up:
+ type: boolean
+
+ bias-pull-down:
+ type: boolean
+
+ drive-strength-microamp:
+ description: typical current when output high level.
+
+ input-schmitt-microvolt:
+ description: typical threshold for schmitt trigger.
+
+ power-source:
+ description: power supplies at X mV.
+ enum: [ 1800, 3300 ]
+
+ slew-rate:
+ description: slew rate for output buffer (0 is fast, 1 is slow)
+ enum: [ 0, 1 ]
+
+ bias-bus-hold: true
+
+ required:
+ - pinmux
+ - power-source
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
+
+ pinctrl@3001000 {
+ compatible = "sophgo,cv1800b-pinctrl";
+ reg = <0x03001000 0x1000>,
+ <0x05027000 0x1000>;
+ reg-names = "sys", "rtc";
+
+ uart0_cfg: uart0-cfg {
+ uart0-pins {
+ pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+ <PINMUX(PIN_UART0_RX, 0)>;
+ bias-pull-up;
+ drive-strength-microamp = <10800>;
+ input-schmitt-microvolt = <0>;
+ power-source = <3300>;
+ slew-rate = <0>;
+ };
+ };
+ };
+
+...
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
+#define _DT_BINDINGS_PINCTRL_CV1800B_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AOUTR 1
+#define PIN_SD0_CLK 3
+#define PIN_SD0_CMD 4
+#define PIN_SD0_D0 5
+#define PIN_SD0_D1 7
+#define PIN_SD0_D2 8
+#define PIN_SD0_D3 9
+#define PIN_SD0_CD 11
+#define PIN_SD0_PWR_EN 12
+#define PIN_SPK_EN 14
+#define PIN_UART0_TX 15
+#define PIN_UART0_RX 16
+#define PIN_SPINOR_HOLD_X 17
+#define PIN_SPINOR_SCK 18
+#define PIN_SPINOR_MOSI 19
+#define PIN_SPINOR_WP_X 20
+#define PIN_SPINOR_MISO 21
+#define PIN_SPINOR_CS_X 22
+#define PIN_IIC0_SCL 23
+#define PIN_IIC0_SDA 24
+#define PIN_AUX0 25
+#define PIN_PWR_VBAT_DET 30
+#define PIN_PWR_SEQ2 31
+#define PIN_XTAL_XIN 33
+#define PIN_SD1_GPIO0 35
+#define PIN_SD1_GPIO1 36
+#define PIN_SD1_D3 38
+#define PIN_SD1_D2 39
+#define PIN_SD1_D1 40
+#define PIN_SD1_D0 41
+#define PIN_SD1_CMD 42
+#define PIN_SD1_CLK 43
+#define PIN_ADC1 44
+#define PIN_USB_VBUS_DET 45
+#define PIN_ETH_TXP 47
+#define PIN_ETH_TXM 48
+#define PIN_ETH_RXP 49
+#define PIN_ETH_RXM 50
+#define PIN_MIPIRX4N 56
+#define PIN_MIPIRX4P 57
+#define PIN_MIPIRX3N 58
+#define PIN_MIPIRX3P 59
+#define PIN_MIPIRX2N 60
+#define PIN_MIPIRX2P 61
+#define PIN_MIPIRX1N 62
+#define PIN_MIPIRX1P 63
+#define PIN_MIPIRX0N 64
+#define PIN_MIPIRX0P 65
+#define PIN_AUD_AINL_MIC 67
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
+#define _DT_BINDINGS_PINCTRL_CV1812H_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col) \
+ ((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4 PINPOS('A', 2)
+#define PIN_MIPIRX0N PINPOS('A', 4)
+#define PIN_MIPIRX3P PINPOS('A', 6)
+#define PIN_MIPIRX4P PINPOS('A', 7)
+#define PIN_VIVO_D2 PINPOS('A', 9)
+#define PIN_VIVO_D3 PINPOS('A', 10)
+#define PIN_VIVO_D10 PINPOS('A', 12)
+#define PIN_USB_VBUS_DET PINPOS('A', 13)
+#define PIN_MIPI_TXP3 PINPOS('B', 1)
+#define PIN_MIPI_TXM3 PINPOS('B', 2)
+#define PIN_MIPI_TXP4 PINPOS('B', 3)
+#define PIN_MIPIRX0P PINPOS('B', 4)
+#define PIN_MIPIRX1N PINPOS('B', 5)
+#define PIN_MIPIRX2N PINPOS('B', 6)
+#define PIN_MIPIRX4N PINPOS('B', 7)
+#define PIN_MIPIRX5N PINPOS('B', 8)
+#define PIN_VIVO_D1 PINPOS('B', 9)
+#define PIN_VIVO_D5 PINPOS('B', 10)
+#define PIN_VIVO_D7 PINPOS('B', 11)
+#define PIN_VIVO_D9 PINPOS('B', 12)
+#define PIN_USB_ID PINPOS('B', 13)
+#define PIN_ETH_RXM PINPOS('B', 15)
+#define PIN_MIPI_TXP2 PINPOS('C', 1)
+#define PIN_MIPI_TXM2 PINPOS('C', 2)
+#define PIN_CAM_PD0 PINPOS('C', 3)
+#define PIN_CAM_MCLK0 PINPOS('C', 4)
+#define PIN_MIPIRX1P PINPOS('C', 5)
+#define PIN_MIPIRX2P PINPOS('C', 6)
+#define PIN_MIPIRX3N PINPOS('C', 7)
+#define PIN_MIPIRX5P PINPOS('C', 8)
+#define PIN_VIVO_CLK PINPOS('C', 9)
+#define PIN_VIVO_D6 PINPOS('C', 10)
+#define PIN_VIVO_D8 PINPOS('C', 11)
+#define PIN_USB_VBUS_EN PINPOS('C', 12)
+#define PIN_ETH_RXP PINPOS('C', 14)
+#define PIN_GPIO_RTX PINPOS('C', 15)
+#define PIN_MIPI_TXP1 PINPOS('D', 1)
+#define PIN_MIPI_TXM1 PINPOS('D', 2)
+#define PIN_CAM_MCLK1 PINPOS('D', 3)
+#define PIN_IIC3_SCL PINPOS('D', 4)
+#define PIN_VIVO_D4 PINPOS('D', 10)
+#define PIN_ETH_TXM PINPOS('D', 14)
+#define PIN_ETH_TXP PINPOS('D', 15)
+#define PIN_MIPI_TXP0 PINPOS('E', 1)
+#define PIN_MIPI_TXM0 PINPOS('E', 2)
+#define PIN_CAM_PD1 PINPOS('E', 4)
+#define PIN_CAM_RST0 PINPOS('E', 5)
+#define PIN_VIVO_D0 PINPOS('E', 10)
+#define PIN_ADC1 PINPOS('E', 13)
+#define PIN_ADC2 PINPOS('E', 14)
+#define PIN_ADC3 PINPOS('E', 15)
+#define PIN_AUD_AOUTL PINPOS('F', 2)
+#define PIN_IIC3_SDA PINPOS('F', 4)
+#define PIN_SD1_D2 PINPOS('F', 14)
+#define PIN_AUD_AOUTR PINPOS('G', 2)
+#define PIN_SD1_D3 PINPOS('G', 13)
+#define PIN_SD1_CLK PINPOS('G', 14)
+#define PIN_SD1_CMD PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC PINPOS('H', 1)
+#define PIN_RSTN PINPOS('H', 12)
+#define PIN_PWM0_BUCK PINPOS('H', 13)
+#define PIN_SD1_D1 PINPOS('H', 14)
+#define PIN_SD1_D0 PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC PINPOS('J', 1)
+#define PIN_IIC2_SCL PINPOS('J', 13)
+#define PIN_IIC2_SDA PINPOS('J', 14)
+#define PIN_SD0_CD PINPOS('K', 2)
+#define PIN_SD0_D1 PINPOS('K', 3)
+#define PIN_UART2_RX PINPOS('K', 13)
+#define PIN_UART2_CTS PINPOS('K', 14)
+#define PIN_UART2_TX PINPOS('K', 15)
+#define PIN_SD0_CLK PINPOS('L', 1)
+#define PIN_SD0_D0 PINPOS('L', 2)
+#define PIN_SD0_CMD PINPOS('L', 3)
+#define PIN_CLK32K PINPOS('L', 14)
+#define PIN_UART2_RTS PINPOS('L', 15)
+#define PIN_SD0_D3 PINPOS('M', 1)
+#define PIN_SD0_D2 PINPOS('M', 2)
+#define PIN_UART0_RX PINPOS('M', 4)
+#define PIN_UART0_TX PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
+#define PIN_PWR_ON PINPOS('M', 11)
+#define PIN_PWR_GPIO2 PINPOS('M', 12)
+#define PIN_PWR_GPIO0 PINPOS('M', 13)
+#define PIN_CLK25M PINPOS('M', 14)
+#define PIN_SD0_PWR_EN PINPOS('N', 1)
+#define PIN_SPK_EN PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
+#define PIN_PWR_GPIO1 PINPOS('N', 13)
+#define PIN_EMMC_DAT3 PINPOS('P', 1)
+#define PIN_EMMC_DAT0 PINPOS('P', 2)
+#define PIN_EMMC_DAT2 PINPOS('P', 3)
+#define PIN_EMMC_RSTN PINPOS('P', 4)
+#define PIN_AUX0 PINPOS('P', 5)
+#define PIN_IIC0_SDA PINPOS('P', 6)
+#define PIN_PWR_SEQ3 PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET PINPOS('P', 11)
+#define PIN_PWR_SEQ1 PINPOS('P', 12)
+#define PIN_PWR_BUTTON1 PINPOS('P', 13)
+#define PIN_EMMC_DAT1 PINPOS('R', 2)
+#define PIN_EMMC_CMD PINPOS('R', 3)
+#define PIN_EMMC_CLK PINPOS('R', 4)
+#define PIN_IIC0_SCL PINPOS('R', 6)
+#define PIN_GPIO_ZQ PINPOS('R', 10)
+#define PIN_PWR_RSTN PINPOS('R', 11)
+#define PIN_PWR_SEQ2 PINPOS('R', 12)
+#define PIN_XTAL_XIN PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2023 Sophgo Ltd.
+ *
+ * Author: Inochi Amaoto <inochiama@outlook.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
+#define _DT_BINDINGS_PINCTRL_CV18XX_H
+
+#define PIN_MUX_INVALD 0xff
+
+#define PINMUX2(pin, mux, mux2) \
+ (((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
+
+#define PINMUX(pin, mux) \
+ PINMUX2(pin, mux, PIN_MUX_INVALD)
+
+#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
+#define _DT_BINDINGS_PINCTRL_SG2000_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PINPOS(row, col) \
+ ((((row) - 'A' + 1) << 8) + ((col) - 1))
+
+#define PIN_MIPI_TXM4 PINPOS('A', 2)
+#define PIN_MIPIRX0N PINPOS('A', 4)
+#define PIN_MIPIRX3P PINPOS('A', 6)
+#define PIN_MIPIRX4P PINPOS('A', 7)
+#define PIN_VIVO_D2 PINPOS('A', 9)
+#define PIN_VIVO_D3 PINPOS('A', 10)
+#define PIN_VIVO_D10 PINPOS('A', 12)
+#define PIN_USB_VBUS_DET PINPOS('A', 13)
+#define PIN_MIPI_TXP3 PINPOS('B', 1)
+#define PIN_MIPI_TXM3 PINPOS('B', 2)
+#define PIN_MIPI_TXP4 PINPOS('B', 3)
+#define PIN_MIPIRX0P PINPOS('B', 4)
+#define PIN_MIPIRX1N PINPOS('B', 5)
+#define PIN_MIPIRX2N PINPOS('B', 6)
+#define PIN_MIPIRX4N PINPOS('B', 7)
+#define PIN_MIPIRX5N PINPOS('B', 8)
+#define PIN_VIVO_D1 PINPOS('B', 9)
+#define PIN_VIVO_D5 PINPOS('B', 10)
+#define PIN_VIVO_D7 PINPOS('B', 11)
+#define PIN_VIVO_D9 PINPOS('B', 12)
+#define PIN_USB_ID PINPOS('B', 13)
+#define PIN_ETH_RXM PINPOS('B', 15)
+#define PIN_MIPI_TXP2 PINPOS('C', 1)
+#define PIN_MIPI_TXM2 PINPOS('C', 2)
+#define PIN_CAM_PD0 PINPOS('C', 3)
+#define PIN_CAM_MCLK0 PINPOS('C', 4)
+#define PIN_MIPIRX1P PINPOS('C', 5)
+#define PIN_MIPIRX2P PINPOS('C', 6)
+#define PIN_MIPIRX3N PINPOS('C', 7)
+#define PIN_MIPIRX5P PINPOS('C', 8)
+#define PIN_VIVO_CLK PINPOS('C', 9)
+#define PIN_VIVO_D6 PINPOS('C', 10)
+#define PIN_VIVO_D8 PINPOS('C', 11)
+#define PIN_USB_VBUS_EN PINPOS('C', 12)
+#define PIN_ETH_RXP PINPOS('C', 14)
+#define PIN_GPIO_RTX PINPOS('C', 15)
+#define PIN_MIPI_TXP1 PINPOS('D', 1)
+#define PIN_MIPI_TXM1 PINPOS('D', 2)
+#define PIN_CAM_MCLK1 PINPOS('D', 3)
+#define PIN_IIC3_SCL PINPOS('D', 4)
+#define PIN_VIVO_D4 PINPOS('D', 10)
+#define PIN_ETH_TXM PINPOS('D', 14)
+#define PIN_ETH_TXP PINPOS('D', 15)
+#define PIN_MIPI_TXP0 PINPOS('E', 1)
+#define PIN_MIPI_TXM0 PINPOS('E', 2)
+#define PIN_CAM_PD1 PINPOS('E', 4)
+#define PIN_CAM_RST0 PINPOS('E', 5)
+#define PIN_VIVO_D0 PINPOS('E', 10)
+#define PIN_ADC1 PINPOS('E', 13)
+#define PIN_ADC2 PINPOS('E', 14)
+#define PIN_ADC3 PINPOS('E', 15)
+#define PIN_AUD_AOUTL PINPOS('F', 2)
+#define PIN_IIC3_SDA PINPOS('F', 4)
+#define PIN_SD1_D2 PINPOS('F', 14)
+#define PIN_AUD_AOUTR PINPOS('G', 2)
+#define PIN_SD1_D3 PINPOS('G', 13)
+#define PIN_SD1_CLK PINPOS('G', 14)
+#define PIN_SD1_CMD PINPOS('G', 15)
+#define PIN_AUD_AINL_MIC PINPOS('H', 1)
+#define PIN_RSTN PINPOS('H', 12)
+#define PIN_PWM0_BUCK PINPOS('H', 13)
+#define PIN_SD1_D1 PINPOS('H', 14)
+#define PIN_SD1_D0 PINPOS('H', 15)
+#define PIN_AUD_AINR_MIC PINPOS('J', 1)
+#define PIN_IIC2_SCL PINPOS('J', 13)
+#define PIN_IIC2_SDA PINPOS('J', 14)
+#define PIN_SD0_CD PINPOS('K', 2)
+#define PIN_SD0_D1 PINPOS('K', 3)
+#define PIN_UART2_RX PINPOS('K', 13)
+#define PIN_UART2_CTS PINPOS('K', 14)
+#define PIN_UART2_TX PINPOS('K', 15)
+#define PIN_SD0_CLK PINPOS('L', 1)
+#define PIN_SD0_D0 PINPOS('L', 2)
+#define PIN_SD0_CMD PINPOS('L', 3)
+#define PIN_CLK32K PINPOS('L', 14)
+#define PIN_UART2_RTS PINPOS('L', 15)
+#define PIN_SD0_D3 PINPOS('M', 1)
+#define PIN_SD0_D2 PINPOS('M', 2)
+#define PIN_UART0_RX PINPOS('M', 4)
+#define PIN_UART0_TX PINPOS('M', 5)
+#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
+#define PIN_PWR_ON PINPOS('M', 11)
+#define PIN_PWR_GPIO2 PINPOS('M', 12)
+#define PIN_PWR_GPIO0 PINPOS('M', 13)
+#define PIN_CLK25M PINPOS('M', 14)
+#define PIN_SD0_PWR_EN PINPOS('N', 1)
+#define PIN_SPK_EN PINPOS('N', 3)
+#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
+#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
+#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
+#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
+#define PIN_PWR_GPIO1 PINPOS('N', 13)
+#define PIN_EMMC_DAT3 PINPOS('P', 1)
+#define PIN_EMMC_DAT0 PINPOS('P', 2)
+#define PIN_EMMC_DAT2 PINPOS('P', 3)
+#define PIN_EMMC_RSTN PINPOS('P', 4)
+#define PIN_AUX0 PINPOS('P', 5)
+#define PIN_IIC0_SDA PINPOS('P', 6)
+#define PIN_PWR_SEQ3 PINPOS('P', 10)
+#define PIN_PWR_VBAT_DET PINPOS('P', 11)
+#define PIN_PWR_SEQ1 PINPOS('P', 12)
+#define PIN_PWR_BUTTON1 PINPOS('P', 13)
+#define PIN_EMMC_DAT1 PINPOS('R', 2)
+#define PIN_EMMC_CMD PINPOS('R', 3)
+#define PIN_EMMC_CLK PINPOS('R', 4)
+#define PIN_IIC0_SCL PINPOS('R', 6)
+#define PIN_GPIO_ZQ PINPOS('R', 10)
+#define PIN_PWR_RSTN PINPOS('R', 11)
+#define PIN_PWR_SEQ2 PINPOS('R', 12)
+#define PIN_XTAL_XIN PINPOS('R', 13)
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (C) 2024 Inochi Amaoto <inochiama@outlook.com>
+ *
+ * This file is generated from vendor pinout definition.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
+#define _DT_BINDINGS_PINCTRL_SG2002_H
+
+#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
+
+#define PIN_AUD_AINL_MIC 2
+#define PIN_AUD_AOUTR 4
+#define PIN_SD0_CLK 6
+#define PIN_SD0_CMD 7
+#define PIN_SD0_D0 8
+#define PIN_SD0_D1 10
+#define PIN_SD0_D2 11
+#define PIN_SD0_D3 12
+#define PIN_SD0_CD 14
+#define PIN_SD0_PWR_EN 15
+#define PIN_SPK_EN 17
+#define PIN_UART0_TX 18
+#define PIN_UART0_RX 19
+#define PIN_EMMC_DAT2 20
+#define PIN_EMMC_CLK 21
+#define PIN_EMMC_DAT0 22
+#define PIN_EMMC_DAT3 23
+#define PIN_EMMC_CMD 24
+#define PIN_EMMC_DAT1 25
+#define PIN_JTAG_CPU_TMS 26
+#define PIN_JTAG_CPU_TCK 27
+#define PIN_IIC0_SCL 28
+#define PIN_IIC0_SDA 29
+#define PIN_AUX0 30
+#define PIN_GPIO_ZQ 35
+#define PIN_PWR_VBAT_DET 38
+#define PIN_PWR_RSTN 39
+#define PIN_PWR_SEQ1 40
+#define PIN_PWR_SEQ2 41
+#define PIN_PWR_WAKEUP0 43
+#define PIN_PWR_BUTTON1 44
+#define PIN_XTAL_XIN 45
+#define PIN_PWR_GPIO0 47
+#define PIN_PWR_GPIO1 48
+#define PIN_PWR_GPIO2 49
+#define PIN_SD1_D3 51
+#define PIN_SD1_D2 52
+#define PIN_SD1_D1 53
+#define PIN_SD1_D0 54
+#define PIN_SD1_CMD 55
+#define PIN_SD1_CLK 56
+#define PIN_PWM0_BUCK 58
+#define PIN_ADC1 59
+#define PIN_USB_VBUS_DET 60
+#define PIN_ETH_TXP 62
+#define PIN_ETH_TXM 63
+#define PIN_ETH_RXP 64
+#define PIN_ETH_RXM 65
+#define PIN_GPIO_RTX 67
+#define PIN_MIPIRX4N 72
+#define PIN_MIPIRX4P 73
+#define PIN_MIPIRX3N 74
+#define PIN_MIPIRX3P 75
+#define PIN_MIPIRX2N 76
+#define PIN_MIPIRX2P 77
+#define PIN_MIPIRX1N 78
+#define PIN_MIPIRX1P 79
+#define PIN_MIPIRX0N 80
+#define PIN_MIPIRX0P 81
+#define PIN_MIPI_TXM2 83
+#define PIN_MIPI_TXP2 84
+#define PIN_MIPI_TXM1 85
+#define PIN_MIPI_TXP1 86
+#define PIN_MIPI_TXM0 87
+#define PIN_MIPI_TXP0 88
+
+#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */
projects / linux-block.git / commitdiff