habanalabs: rename ArmCP to CPU-CP
authorOded Gabbay <oded.gabbay@gmail.com>
Fri, 4 Sep 2020 17:18:16 +0000 (20:18 +0300)
committerOded Gabbay <oded.gabbay@gmail.com>
Tue, 22 Sep 2020 15:49:52 +0000 (18:49 +0300)
There were a couple of comments where the name ArmCP was still used. Rename
it to CPU-CP.

In addition, rename ArmCP or ARM in log messages to "device CPU".

Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
drivers/misc/habanalabs/common/firmware_if.c
drivers/misc/habanalabs/common/habanalabs.h
drivers/misc/habanalabs/gaudi/gaudi.c
drivers/misc/habanalabs/goya/goya.c

index f2a38e95359a2e2a336fe4ca062ae11ed8a8ea19..4409962d30aec8b2c7d016e36f7b4f00da626e3b 100644 (file)
@@ -175,7 +175,7 @@ int hl_fw_unmask_irq_arr(struct hl_device *hdev, const u32 *irq_arr,
        total_pkt_size = sizeof(struct cpucp_unmask_irq_arr_packet) +
                        irq_arr_size;
 
-       /* data should be aligned to 8 bytes in order to ArmCP to copy it */
+       /* data should be aligned to 8 bytes in order to CPU-CP to copy it */
        total_pkt_size = (total_pkt_size + 0x7) & ~0x7;
 
        /* total_pkt_size is casted to u16 later on */
@@ -283,7 +283,7 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev)
                                        &cpucp_info_dma_addr);
        if (!cpucp_info_cpu_addr) {
                dev_err(hdev->dev,
-                       "Failed to allocate DMA memory for ArmCP info packet\n");
+                       "Failed to allocate DMA memory for CPU-CP info packet\n");
                return -ENOMEM;
        }
 
@@ -298,7 +298,7 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev)
                                        HL_CPUCP_INFO_TIMEOUT_USEC, &result);
        if (rc) {
                dev_err(hdev->dev,
-                       "Failed to handle ArmCP info pkt, error %d\n", rc);
+                       "Failed to handle CPU-CP info pkt, error %d\n", rc);
                goto out;
        }
 
@@ -333,7 +333,7 @@ int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size)
                                        max_size, &eeprom_info_dma_addr);
        if (!eeprom_info_cpu_addr) {
                dev_err(hdev->dev,
-                       "Failed to allocate DMA memory for ArmCP EEPROM packet\n");
+                       "Failed to allocate DMA memory for CPU-CP EEPROM packet\n");
                return -ENOMEM;
        }
 
@@ -349,7 +349,8 @@ int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size)
 
        if (rc) {
                dev_err(hdev->dev,
-                       "Failed to handle ArmCP EEPROM packet, error %d\n", rc);
+                       "Failed to handle CPU-CP EEPROM packet, error %d\n",
+                       rc);
                goto out;
        }
 
@@ -379,7 +380,7 @@ int hl_fw_cpucp_pci_counters_get(struct hl_device *hdev,
                                        HL_CPUCP_INFO_TIMEOUT_USEC, &result);
        if (rc) {
                dev_err(hdev->dev,
-                       "Failed to handle ArmCP PCI info pkt, error %d\n", rc);
+                       "Failed to handle CPU-CP PCI info pkt, error %d\n", rc);
                return rc;
        }
        counters->rx_throughput = result;
@@ -390,7 +391,7 @@ int hl_fw_cpucp_pci_counters_get(struct hl_device *hdev,
                                        HL_CPUCP_INFO_TIMEOUT_USEC, &result);
        if (rc) {
                dev_err(hdev->dev,
-                       "Failed to handle ArmCP PCI info pkt, error %d\n", rc);
+                       "Failed to handle CPU-CP PCI info pkt, error %d\n", rc);
                return rc;
        }
        counters->tx_throughput = result;
@@ -403,7 +404,7 @@ int hl_fw_cpucp_pci_counters_get(struct hl_device *hdev,
                        HL_CPUCP_INFO_TIMEOUT_USEC, &result);
        if (rc) {
                dev_err(hdev->dev,
-                       "Failed to handle ArmCP PCI info pkt, error %d\n", rc);
+                       "Failed to handle CPU-CP PCI info pkt, error %d\n", rc);
                return rc;
        }
        counters->replay_cnt = (u32) result;
index 6ea8ae616cf4940eae33821fa3e036cb7e9c4eb5..b56410d75065533867d7a5ca00aa2dcb9fea7f03 100644 (file)
@@ -466,7 +466,7 @@ struct hl_cs_job;
 #define HL_EQ_LENGTH                   64
 #define HL_EQ_SIZE_IN_BYTES            (HL_EQ_LENGTH * HL_EQ_ENTRY_SIZE)
 
-/* Host <-> ArmCP shared memory size */
+/* Host <-> CPU-CP shared memory size */
 #define HL_CPU_ACCESSIBLE_MEM_SIZE     SZ_2M
 
 /**
@@ -648,7 +648,7 @@ enum div_select_defs {
  * @debugfs_read32: debug interface for reading u32 from DRAM/SRAM.
  * @debugfs_write32: debug interface for writing u32 to DRAM/SRAM.
  * @add_device_attr: add ASIC specific device attributes.
- * @handle_eqe: handle event queue entry (IRQ) from ArmCP.
+ * @handle_eqe: handle event queue entry (IRQ) from CPU-CP.
  * @set_pll_profile: change PLL profile (manual/automatic).
  * @get_events_stat: retrieve event queue entries histogram.
  * @read_pte: read MMU page table entry from DRAM.
@@ -657,7 +657,7 @@ enum div_select_defs {
  *                        (L1 only) or hard (L0 & L1) flush.
  * @mmu_invalidate_cache_range: flush specific MMU STLB cache lines with
  *                              ASID-VA-size mask.
- * @send_heartbeat: send is-alive packet to ArmCP and verify response.
+ * @send_heartbeat: send is-alive packet to CPU-CP and verify response.
  * @set_clock_gating: enable/disable clock gating per engine according to
  *                    clock gating mask in hdev
  * @disable_clock_gating: disable clock gating completely
@@ -1438,8 +1438,8 @@ struct hl_device_idle_busy_ts {
  * @dev: related kernel basic device structure.
  * @dev_ctrl: related kernel device structure for the control device
  * @work_freq: delayed work to lower device frequency if possible.
- * @work_heartbeat: delayed work for ArmCP is-alive check.
- * @asic_name: ASIC specific nmae.
+ * @work_heartbeat: delayed work for CPU-CP is-alive check.
+ * @asic_name: ASIC specific name.
  * @asic_type: ASIC specific type.
  * @completion_queue: array of hl_cq.
  * @cq_wq: work queues of completion queues for executing work in process
@@ -1450,14 +1450,14 @@ struct hl_device_idle_busy_ts {
  * @hw_queues_mirror_list: CS mirror list for TDR.
  * @hw_queues_mirror_lock: protects hw_queues_mirror_list.
  * @kernel_cb_mgr: command buffer manager for creating/destroying/handling CGs.
- * @event_queue: event queue for IRQ from ArmCP.
+ * @event_queue: event queue for IRQ from CPU-CP.
  * @dma_pool: DMA pool for small allocations.
- * @cpu_accessible_dma_mem: Host <-> ArmCP shared memory CPU address.
- * @cpu_accessible_dma_address: Host <-> ArmCP shared memory DMA address.
- * @cpu_accessible_dma_pool: Host <-> ArmCP shared memory pool.
+ * @cpu_accessible_dma_mem: Host <-> CPU-CP shared memory CPU address.
+ * @cpu_accessible_dma_address: Host <-> CPU-CP shared memory DMA address.
+ * @cpu_accessible_dma_pool: Host <-> CPU-CP shared memory pool.
  * @asid_bitmap: holds used/available ASIDs.
  * @asid_mutex: protects asid_bitmap.
- * @send_cpu_message_lock: enforces only one message in Host <-> ArmCP queue.
+ * @send_cpu_message_lock: enforces only one message in Host <-> CPU-CP queue.
  * @debug_lock: protects critical section of setting debug mode for device
  * @asic_prop: ASIC specific immutable properties.
  * @asic_funcs: ASIC specific functions.
@@ -1511,7 +1511,7 @@ struct hl_device_idle_busy_ts {
  * @late_init_done: is late init stage was done during initialization.
  * @hwmon_initialized: is H/W monitor sensors was initialized.
  * @hard_reset_pending: is there a hard reset work pending.
- * @heartbeat: is heartbeat sanity check towards ArmCP enabled.
+ * @heartbeat: is heartbeat sanity check towards CPU-CP enabled.
  * @reset_on_lockup: true if a reset should be done in case of stuck CS, false
  *                   otherwise.
  * @dram_supports_virtual_memory: is MMU enabled towards DRAM.
index bc7e7e3ba3a8b49f716957d7faa03f33ce77b43b..7946179632fbbb90bb1ca6b3200f45f04ee641da 100644 (file)
@@ -2854,7 +2854,7 @@ static int gaudi_init_cpu_queues(struct hl_device *hdev, u32 cpu_timeout)
 
        if (err) {
                dev_err(hdev->dev,
-                       "Failed to communicate with ARM CPU (ArmCP timeout)\n");
+                       "Failed to communicate with Device CPU (CPU-CP timeout)\n");
                return -EIO;
        }
 
@@ -5616,7 +5616,7 @@ static bool gaudi_tpc_read_interrupts(struct hl_device *hdev, u8 tpc_id,
        bool soft_reset_required = false;
 
        /* Accessing the TPC_INTR_CAUSE registers requires disabling the clock
-        * gating, and thus cannot be done in ArmCP and should be done instead
+        * gating, and thus cannot be done in CPU-CP and should be done instead
         * by the driver.
         */
 
index 94b7958ba5fbf077a9c6b5a9245589758eb373c7..fb7e4f50c198844a7b752c28c16129f0200886e0 100644 (file)
@@ -4509,7 +4509,7 @@ static int goya_unmask_irq_arr(struct hl_device *hdev, u32 *irq_arr,
        total_pkt_size = sizeof(struct cpucp_unmask_irq_arr_packet) +
                        irq_arr_size;
 
-       /* data should be aligned to 8 bytes in order to ArmCP to copy it */
+       /* data should be aligned to 8 bytes in order to CPU-CP to copy it */
        total_pkt_size = (total_pkt_size + 0x7) & ~0x7;
 
        /* total_pkt_size is casted to u16 later on */