net: qcom/emac: initial ACPI support
authorTimur Tabi <timur@codeaurora.org>
Wed, 28 Sep 2016 16:58:44 +0000 (11:58 -0500)
committerDavid S. Miller <davem@davemloft.net>
Thu, 29 Sep 2016 05:50:13 +0000 (01:50 -0400)
Add support for reading addresses, interrupts, and _DSD properties
from ACPI tables, just like with device tree.  The HID for the
EMAC device itself is QCOM8070.  The internal PHY is represented
by a child node with a HID of QCOM8071.

The EMAC also has some complex clock initialization requirements
that are not represented by this patch.  This will be addressed
in a future patch.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/qualcomm/emac/emac-phy.c
drivers/net/ethernet/qualcomm/emac/emac-sgmii.c
drivers/net/ethernet/qualcomm/emac/emac.c

index c412ba9a27e7c5747829fdd7fca581d8a3b2017c..da4e90db4d989a7d9f74c45279ca36cb675b20bc 100644 (file)
@@ -19,6 +19,7 @@
 #include <linux/of_mdio.h>
 #include <linux/phy.h>
 #include <linux/iopoll.h>
+#include <linux/acpi.h>
 #include "emac.h"
 #include "emac-mac.h"
 #include "emac-phy.h"
@@ -167,7 +168,6 @@ static int emac_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val)
 int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
 {
        struct device_node *np = pdev->dev.of_node;
-       struct device_node *phy_np;
        struct mii_bus *mii_bus;
        int ret;
 
@@ -183,14 +183,37 @@ int emac_phy_config(struct platform_device *pdev, struct emac_adapter *adpt)
        mii_bus->parent = &pdev->dev;
        mii_bus->priv = adpt;
 
-       ret = of_mdiobus_register(mii_bus, np);
-       if (ret) {
-               dev_err(&pdev->dev, "could not register mdio bus\n");
-               return ret;
+       if (has_acpi_companion(&pdev->dev)) {
+               u32 phy_addr;
+
+               ret = mdiobus_register(mii_bus);
+               if (ret) {
+                       dev_err(&pdev->dev, "could not register mdio bus\n");
+                       return ret;
+               }
+               ret = device_property_read_u32(&pdev->dev, "phy-channel",
+                                              &phy_addr);
+               if (ret)
+                       /* If we can't read a valid phy address, then assume
+                        * that there is only one phy on this mdio bus.
+                        */
+                       adpt->phydev = phy_find_first(mii_bus);
+               else
+                       adpt->phydev = mdiobus_get_phy(mii_bus, phy_addr);
+
+       } else {
+               struct device_node *phy_np;
+
+               ret = of_mdiobus_register(mii_bus, np);
+               if (ret) {
+                       dev_err(&pdev->dev, "could not register mdio bus\n");
+                       return ret;
+               }
+
+               phy_np = of_parse_phandle(np, "phy-handle", 0);
+               adpt->phydev = of_phy_find_device(phy_np);
        }
 
-       phy_np = of_parse_phandle(np, "phy-handle", 0);
-       adpt->phydev = of_phy_find_device(phy_np);
        if (!adpt->phydev) {
                dev_err(&pdev->dev, "could not find external phy\n");
                mdiobus_unregister(mii_bus);
index ad0e4209d9481ad447eb7cdf18e32b4bec7c577f..3d2c05a40d2c7ea6084f5484f461343d5f6e326f 100644 (file)
@@ -14,6 +14,7 @@
  */
 
 #include <linux/iopoll.h>
+#include <linux/acpi.h>
 #include <linux/of_device.h>
 #include "emac.h"
 #include "emac-mac.h"
@@ -662,6 +663,24 @@ void emac_sgmii_reset(struct emac_adapter *adpt)
        clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000);
 }
 
+static int emac_sgmii_acpi_match(struct device *dev, void *data)
+{
+       static const struct acpi_device_id match_table[] = {
+               {
+                       .id = "QCOM8071",
+                       .driver_data = (kernel_ulong_t)emac_sgmii_init_v2,
+               },
+               {}
+       };
+       const struct acpi_device_id *id = acpi_match_device(match_table, dev);
+       emac_sgmii_initialize *initialize = data;
+
+       if (id)
+               *initialize = (emac_sgmii_initialize)id->driver_data;
+
+       return !!id;
+}
+
 static const struct of_device_id emac_sgmii_dt_match[] = {
        {
                .compatible = "qcom,fsm9900-emac-sgmii",
@@ -679,30 +698,45 @@ int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt)
        struct platform_device *sgmii_pdev = NULL;
        struct emac_phy *phy = &adpt->phy;
        struct resource *res;
-       const struct of_device_id *match;
-       struct device_node *np;
        int ret;
 
-       np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0);
-       if (!np) {
-               dev_err(&pdev->dev, "missing internal-phy property\n");
-               return -ENODEV;
-       }
+       if (has_acpi_companion(&pdev->dev)) {
+               struct device *dev;
 
-       sgmii_pdev = of_find_device_by_node(np);
-       if (!sgmii_pdev) {
-               dev_err(&pdev->dev, "invalid internal-phy property\n");
-               return -ENODEV;
-       }
+               dev = device_find_child(&pdev->dev, &phy->initialize,
+                                       emac_sgmii_acpi_match);
 
-       match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev);
-       if (!match) {
-               dev_err(&pdev->dev, "unrecognized internal phy node\n");
-               ret = -ENODEV;
-               goto error_put_device;
-       }
+               if (!dev) {
+                       dev_err(&pdev->dev, "cannot find internal phy node\n");
+                       return -ENODEV;
+               }
 
-       phy->initialize = (emac_sgmii_initialize)match->data;
+               sgmii_pdev = to_platform_device(dev);
+       } else {
+               const struct of_device_id *match;
+               struct device_node *np;
+
+               np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0);
+               if (!np) {
+                       dev_err(&pdev->dev, "missing internal-phy property\n");
+                       return -ENODEV;
+               }
+
+               sgmii_pdev = of_find_device_by_node(np);
+               if (!sgmii_pdev) {
+                       dev_err(&pdev->dev, "invalid internal-phy property\n");
+                       return -ENODEV;
+               }
+
+               match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev);
+               if (!match) {
+                       dev_err(&pdev->dev, "unrecognized internal phy node\n");
+                       ret = -ENODEV;
+                       goto error_put_device;
+               }
+
+               phy->initialize = (emac_sgmii_initialize)match->data;
+       }
 
        /* Base address is the first address */
        res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0);
index 551df1c5262023a6f7281c9b6856644037978a7b..9bf3b2b82e9532e2662727a31d0846447ee64b39 100644 (file)
@@ -22,6 +22,7 @@
 #include <linux/of_device.h>
 #include <linux/phy.h>
 #include <linux/platform_device.h>
+#include <linux/acpi.h>
 #include "emac.h"
 #include "emac-mac.h"
 #include "emac-phy.h"
@@ -575,6 +576,16 @@ static const struct of_device_id emac_dt_match[] = {
        {}
 };
 
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id emac_acpi_match[] = {
+       {
+               .id = "QCOM8070",
+       },
+       {}
+};
+MODULE_DEVICE_TABLE(acpi, emac_acpi_match);
+#endif
+
 static int emac_probe(struct platform_device *pdev)
 {
        struct net_device *netdev;
@@ -734,6 +745,7 @@ static struct platform_driver emac_platform_driver = {
        .driver = {
                .name           = "qcom-emac",
                .of_match_table = emac_dt_match,
+               .acpi_match_table = ACPI_PTR(emac_acpi_match),
        },
 };