wl1271: Fix ad-hoc mode handling
authorJuuso Oikarinen <juuso.oikarinen@nokia.com>
Fri, 26 Mar 2010 10:53:24 +0000 (12:53 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 31 Mar 2010 18:39:14 +0000 (14:39 -0400)
Fix the driver to better reflect the ad-hoc related configuration from the
mac80211.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/wl12xx/wl1271.h
drivers/net/wireless/wl12xx/wl1271_main.c

index c93968092fc1ca03ce52ff7d23c0fbe518bf44e1..37ad5cd0b82f4fed1f199e3bd190a2bfd26c026a 100644 (file)
@@ -55,6 +55,7 @@ enum {
        DEBUG_ACX       = BIT(13),
        DEBUG_SDIO      = BIT(14),
        DEBUG_FILTERS   = BIT(15),
+       DEBUG_ADHOC     = BIT(16),
        DEBUG_ALL       = ~0,
 };
 
@@ -389,6 +390,7 @@ struct wl1271 {
        u8 bssid[ETH_ALEN];
        u8 mac_addr[ETH_ALEN];
        u8 bss_type;
+       u8 set_bss_type;
        u8 ssid[IW_ESSID_MAX_SIZE + 1];
        u8 ssid_len;
        int channel;
index 00e856c4a611a3a459d5f339bd4cb9bdaeea99a3..49f37b0183ac00e987de4ee9a990121386e47e5a 100644 (file)
@@ -958,9 +958,11 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
        switch (vif->type) {
        case NL80211_IFTYPE_STATION:
                wl->bss_type = BSS_TYPE_STA_BSS;
+               wl->set_bss_type = BSS_TYPE_STA_BSS;
                break;
        case NL80211_IFTYPE_ADHOC:
                wl->bss_type = BSS_TYPE_IBSS;
+               wl->set_bss_type = BSS_TYPE_STA_BSS;
                break;
        default:
                ret = -EOPNOTSUPP;
@@ -1065,6 +1067,7 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
        memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1);
        wl->ssid_len = 0;
        wl->bss_type = MAX_BSS_TYPE;
+       wl->set_bss_type = MAX_BSS_TYPE;
        wl->band = IEEE80211_BAND_2GHZ;
 
        wl->rx_counter = 0;
@@ -1137,10 +1140,7 @@ static int wl1271_join_channel(struct wl1271 *wl, int channel)
        /* pass through frames from all BSS */
        wl1271_configure_filters(wl, FIF_OTHER_BSS);
 
-       /* the dummy join is performed always with STATION BSS type to allow
-          also ad-hoc mode to listen to the surroundings without sending any
-          beacons yet. */
-       ret = wl1271_cmd_join(wl, BSS_TYPE_STA_BSS);
+       ret = wl1271_cmd_join(wl, wl->set_bss_type);
        if (ret < 0)
                goto out;
 
@@ -1211,7 +1211,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
            test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
                wl->channel = channel;
                /* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */
-               ret = wl1271_cmd_join(wl, wl->bss_type);
+               ret = wl1271_cmd_join(wl, wl->set_bss_type);
                if (ret < 0)
                        wl1271_warning("cmd join to update channel failed %d",
                                       ret);
@@ -1575,13 +1575,12 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
        if (ret < 0)
                goto out;
 
-       if (wl->bss_type == BSS_TYPE_IBSS) {
-               /* FIXME: This implements rudimentary ad-hoc support -
-                  proper templates are on the wish list and notification
-                  on when they change. This patch will update the templates
-                  on every call to this function. */
+       if ((changed && BSS_CHANGED_BEACON) &&
+           (wl->bss_type == BSS_TYPE_IBSS)) {
                struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
 
+               wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated");
+
                if (beacon) {
                        struct ieee80211_hdr *hdr;
 
@@ -1613,6 +1612,18 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
                }
        }
 
+       if ((changed & BSS_CHANGED_BEACON_ENABLED) &&
+           (wl->bss_type == BSS_TYPE_IBSS)) {
+               wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s",
+                            bss_conf->enable_beacon ? "enabled" : "disabled");
+
+               if (bss_conf->enable_beacon)
+                       wl->set_bss_type = BSS_TYPE_IBSS;
+               else
+                       wl->set_bss_type = BSS_TYPE_STA_BSS;
+               do_join = true;
+       }
+
        if ((changed & BSS_CHANGED_BSSID) &&
            /*
             * Now we know the correct bssid, so we send a new join command
@@ -1707,7 +1718,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
        }
 
        if (do_join) {
-               ret = wl1271_cmd_join(wl, wl->bss_type);
+               ret = wl1271_cmd_join(wl, wl->set_bss_type);
                if (ret < 0) {
                        wl1271_warning("cmd join failed %d", ret);
                        goto out_sleep;