pda_power: Add optional OTG transceiver and voltage regulator support
authorPhilipp Zabel <philipp.zabel@gmail.com>
Sun, 18 Jan 2009 16:40:27 +0000 (17:40 +0100)
committerAnton Vorontsov <cbouatmailru@gmail.com>
Mon, 2 Feb 2009 17:15:47 +0000 (20:15 +0300)
This patch allows machines to use an OTG transceiver driver instead of
supplying a custom is_usb_online callback to check USB power.
Also, in the case that the OTG transceiver handles charger control when
connected to USB, a regulator named "ac_draw" can be supplied instead of
the custom set_charge callback to control the charger when connected to
AC.

The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in
otg_is_usb_online is probably too simple, I'm just using this with a
peripheral only device and gpio_vbus + bq24022. I'm not sure which other
OTG states can supply power.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
drivers/power/pda_power.c
include/linux/pda_power.h

index b56a704409d26365f88f144034d12e3036f34854..a232de6a57037599f23dd8e99b2a2857f5c443a9 100644 (file)
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/power_supply.h>
 #include <linux/pda_power.h>
+#include <linux/regulator/consumer.h>
 #include <linux/timer.h>
 #include <linux/jiffies.h>
+#include <linux/usb/otg.h>
 
 static inline unsigned int get_irq_flags(struct resource *res)
 {
@@ -35,6 +38,11 @@ static struct timer_list supply_timer;
 static struct timer_list polling_timer;
 static int polling;
 
+#ifdef CONFIG_USB_OTG_UTILS
+static struct otg_transceiver *transceiver;
+#endif
+static struct regulator *ac_draw;
+
 enum {
        PDA_PSY_OFFLINE = 0,
        PDA_PSY_ONLINE = 1,
@@ -104,18 +112,35 @@ static void update_status(void)
 
 static void update_charger(void)
 {
-       if (!pdata->set_charge)
-               return;
-
-       if (new_ac_status > 0) {
-               dev_dbg(dev, "charger on (AC)\n");
-               pdata->set_charge(PDA_POWER_CHARGE_AC);
-       } else if (new_usb_status > 0) {
-               dev_dbg(dev, "charger on (USB)\n");
-               pdata->set_charge(PDA_POWER_CHARGE_USB);
-       } else {
-               dev_dbg(dev, "charger off\n");
-               pdata->set_charge(0);
+       static int regulator_enabled;
+       int max_uA = pdata->ac_max_uA;
+
+       if (pdata->set_charge) {
+               if (new_ac_status > 0) {
+                       dev_dbg(dev, "charger on (AC)\n");
+                       pdata->set_charge(PDA_POWER_CHARGE_AC);
+               } else if (new_usb_status > 0) {
+                       dev_dbg(dev, "charger on (USB)\n");
+                       pdata->set_charge(PDA_POWER_CHARGE_USB);
+               } else {
+                       dev_dbg(dev, "charger off\n");
+                       pdata->set_charge(0);
+               }
+       } else if (ac_draw) {
+               if (new_ac_status > 0) {
+                       regulator_set_current_limit(ac_draw, max_uA, max_uA);
+                       if (!regulator_enabled) {
+                               dev_dbg(dev, "charger on (AC)\n");
+                               regulator_enable(ac_draw);
+                               regulator_enabled = 1;
+                       }
+               } else {
+                       if (regulator_enabled) {
+                               dev_dbg(dev, "charger off\n");
+                               regulator_disable(ac_draw);
+                               regulator_enabled = 0;
+                       }
+               }
        }
 }
 
@@ -194,6 +219,13 @@ static void polling_timer_func(unsigned long unused)
                  jiffies + msecs_to_jiffies(pdata->polling_interval));
 }
 
+#ifdef CONFIG_USB_OTG_UTILS
+static int otg_is_usb_online(void)
+{
+       return (transceiver->state == OTG_STATE_B_PERIPHERAL);
+}
+#endif
+
 static int pda_power_probe(struct platform_device *pdev)
 {
        int ret = 0;
@@ -227,6 +259,9 @@ static int pda_power_probe(struct platform_device *pdev)
        if (!pdata->polling_interval)
                pdata->polling_interval = 2000;
 
+       if (!pdata->ac_max_uA)
+               pdata->ac_max_uA = 500000;
+
        setup_timer(&charger_timer, charger_timer_func, 0);
        setup_timer(&supply_timer, supply_timer_func, 0);
 
@@ -240,6 +275,13 @@ static int pda_power_probe(struct platform_device *pdev)
                pda_psy_usb.num_supplicants = pdata->num_supplicants;
        }
 
+       ac_draw = regulator_get(dev, "ac_draw");
+       if (IS_ERR(ac_draw)) {
+               dev_dbg(dev, "couldn't get ac_draw regulator\n");
+               ac_draw = NULL;
+               ret = PTR_ERR(ac_draw);
+       }
+
        if (pdata->is_ac_online) {
                ret = power_supply_register(&pdev->dev, &pda_psy_ac);
                if (ret) {
@@ -261,6 +303,13 @@ static int pda_power_probe(struct platform_device *pdev)
                }
        }
 
+#ifdef CONFIG_USB_OTG_UTILS
+       transceiver = otg_get_transceiver();
+       if (transceiver && !pdata->is_usb_online) {
+               pdata->is_usb_online = otg_is_usb_online;
+       }
+#endif
+
        if (pdata->is_usb_online) {
                ret = power_supply_register(&pdev->dev, &pda_psy_usb);
                if (ret) {
@@ -300,10 +349,18 @@ usb_irq_failed:
 usb_supply_failed:
        if (pdata->is_ac_online && ac_irq)
                free_irq(ac_irq->start, &pda_psy_ac);
+#ifdef CONFIG_USB_OTG_UTILS
+       if (transceiver)
+               otg_put_transceiver(transceiver);
+#endif
 ac_irq_failed:
        if (pdata->is_ac_online)
                power_supply_unregister(&pda_psy_ac);
 ac_supply_failed:
+       if (ac_draw) {
+               regulator_put(ac_draw);
+               ac_draw = NULL;
+       }
        if (pdata->exit)
                pdata->exit(dev);
 init_failed:
@@ -327,6 +384,14 @@ static int pda_power_remove(struct platform_device *pdev)
                power_supply_unregister(&pda_psy_usb);
        if (pdata->is_ac_online)
                power_supply_unregister(&pda_psy_ac);
+#ifdef CONFIG_USB_OTG_UTILS
+       if (transceiver)
+               otg_put_transceiver(transceiver);
+#endif
+       if (ac_draw) {
+               regulator_put(ac_draw);
+               ac_draw = NULL;
+       }
        if (pdata->exit)
                pdata->exit(dev);
 
index cb7d10f3076343f2e60e5a853411c05aefd6eb0f..d4cf7a2ceb3edfc7779cb4f10c76de5825288317 100644 (file)
@@ -31,6 +31,8 @@ struct pda_power_pdata {
        unsigned int wait_for_status; /* msecs, default is 500 */
        unsigned int wait_for_charger; /* msecs, default is 500 */
        unsigned int polling_interval; /* msecs, default is 2000 */
+
+       unsigned long ac_max_uA; /* current to draw when on AC */
 };
 
 #endif /* __PDA_POWER_H__ */