switch (mode) {
case IWL_LED_BLINK:
IWL_ERR(mvm, "Blink led mode not supported, used default\n");
- /* fall through */
+ fallthrough;
case IWL_LED_DEFAULT:
case IWL_LED_RF_STATE:
mode = IWL_LED_RF_STATE;
case NL80211_IFTYPE_STATION:
if (!vif->p2p)
break;
- /* fall through */
+ fallthrough;
default:
__clear_bit(0, data.available_mac_ids);
}
mvmvif->ap_ibss_active = true;
break;
}
- /* fall through */
+ fallthrough;
case NL80211_IFTYPE_ADHOC:
/*
* The AP binding flow is handled as part of the start_ap flow
return PHY_VHT_CTRL_POS_4_ABOVE;
default:
WARN(1, "Invalid channel definition");
- /* fall through */
+ fallthrough;
case 0:
/*
* The FW is expected to check the control channel position only
!(rx_pkt_status & RX_MPDU_RES_STATUS_TTAK_OK))
return 0;
*crypt_len = IEEE80211_TKIP_IV_LEN;
- /* fall through */
+ fallthrough;
case RX_MPDU_RES_STATUS_SEC_WEP_ENC:
if (!(rx_pkt_status & RX_MPDU_RES_STATUS_ICV_OK))
stats->flag |= RX_FLAG_MMIC_ERROR;
*crypt_len = IEEE80211_TKIP_IV_LEN;
- /* fall through */
+ fallthrough;
case IWL_RX_MPDU_STATUS_SEC_WEP:
if (!(status & IWL_RX_MPDU_STATUS_ICV_OK))
return -1;
he->data4 |= le16_encode_bits(le32_get_bits(phy_data->d2,
IWL_RX_PHY_DATA2_HE_TB_EXT_SPTL_REUSE4),
IEEE80211_RADIOTAP_HE_DATA4_TB_SPTL_REUSE4);
- /* fall through */
+ fallthrough;
case IWL_RX_PHY_INFO_TYPE_HE_SU:
case IWL_RX_PHY_INFO_TYPE_HE_MU:
case IWL_RX_PHY_INFO_TYPE_HE_MU_EXT:
IWL_RX_PHY_DATA4_HE_MU_EXT_PREAMBLE_PUNC_TYPE_MASK),
IEEE80211_RADIOTAP_HE_MU_FLAGS2_PUNC_FROM_SIG_A_BW);
iwl_mvm_decode_he_mu_ext(mvm, phy_data, rate_n_flags, he_mu);
- /* fall through */
+ fallthrough;
case IWL_RX_PHY_INFO_TYPE_HE_MU:
he_mu->flags2 |=
le16_encode_bits(le32_get_bits(phy_data->d1,
le16_encode_bits(le32_get_bits(phy_data->d1,
IWL_RX_PHY_DATA1_HE_MU_SIGB_COMPRESSION),
IEEE80211_RADIOTAP_HE_MU_FLAGS2_SIG_B_COMP);
- /* fall through */
+ fallthrough;
case IWL_RX_PHY_INFO_TYPE_HE_TB:
case IWL_RX_PHY_INFO_TYPE_HE_TB_EXT:
iwl_mvm_decode_he_phy_ru_alloc(phy_data, rate_n_flags,
/* Something is wrong if no scan was running but we
* ran out of scans.
*/
- /* fall through */
+ fallthrough;
default:
WARN_ON(1);
break;
switch (sta->bandwidth) {
case IEEE80211_STA_RX_BW_160:
add_sta_cmd.station_flags |= cpu_to_le32(STA_FLG_FAT_EN_160MHZ);
- /* fall through */
+ fallthrough;
case IEEE80211_STA_RX_BW_80:
add_sta_cmd.station_flags |= cpu_to_le32(STA_FLG_FAT_EN_80MHZ);
- /* fall through */
+ fallthrough;
case IEEE80211_STA_RX_BW_40:
add_sta_cmd.station_flags |= cpu_to_le32(STA_FLG_FAT_EN_40MHZ);
- /* fall through */
+ fallthrough;
case IEEE80211_STA_RX_BW_20:
if (sta->ht_cap.ht_supported)
add_sta_cmd.station_flags |=
break;
case WLAN_CIPHER_SUITE_WEP104:
key_flags |= cpu_to_le16(STA_KEY_FLG_WEP_13BYTES);
- /* fall through */
+ fallthrough;
case WLAN_CIPHER_SUITE_WEP40:
key_flags |= cpu_to_le16(STA_KEY_FLG_WEP);
memcpy(u.cmd.common.key + 3, key->key, key->keylen);
break;
case WLAN_CIPHER_SUITE_GCMP_256:
key_flags |= cpu_to_le16(STA_KEY_FLG_KEY_32BYTES);
- /* fall through */
+ fallthrough;
case WLAN_CIPHER_SUITE_GCMP:
key_flags |= cpu_to_le16(STA_KEY_FLG_GCMP);
memcpy(u.cmd.common.key, key->key, key->keylen);
case WLAN_CIPHER_SUITE_WEP104:
tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
- /* fall through */
+ fallthrough;
case WLAN_CIPHER_SUITE_WEP40:
tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
((keyconf->keyidx << TX_CMD_SEC_WEP_KEY_IDX_POS) &
case WLAN_CIPHER_SUITE_GCMP:
case WLAN_CIPHER_SUITE_GCMP_256:
type = TX_CMD_SEC_GCMP;
- /* Fall through */
+ fallthrough;
case WLAN_CIPHER_SUITE_CCMP_256:
/* TODO: Taking the key from the table might introduce a race
* when PTK rekeying is done, having an old packets with a PN